{
u32 clk_rate;
- clk_rate = clk_get_rate(priv->stmmac_clk);
+ clk_rate = clk_get_rate(priv->plat->stmmac_clk);
/* Platform provided default clk_csr would be assumed valid
* for all other cases except for the below mentioned ones.
/* Check and enter in LPI mode */
if ((priv->dirty_tx == priv->cur_tx) &&
(priv->tx_path_in_lpi_mode == false))
- priv->hw->mac->set_eee_mode(priv->hw);
+ priv->hw->mac->set_eee_mode(priv->hw,
+ priv->plat->en_tx_lpi_clockgating);
}
/**
/* program Sub Second Increment reg */
sec_inc = priv->hw->ptp->config_sub_second_increment(
- priv->ptpaddr, priv->clk_ptp_rate,
+ priv->ptpaddr, priv->plat->clk_ptp_rate,
priv->plat->has_gmac4);
temp = div_u64(1000000000ULL, sec_inc);
* where, freq_div_ratio = 1e9ns/sec_inc
*/
temp = (u64)(temp << 32);
- priv->default_addend = div_u64(temp, priv->clk_ptp_rate);
+ priv->default_addend = div_u64(temp, priv->plat->clk_ptp_rate);
priv->hw->ptp->config_addend(priv->ptpaddr,
priv->default_addend);
if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
return -EOPNOTSUPP;
- /* Fall-back to main clock in case of no PTP ref is passed */
- priv->clk_ptp_ref = devm_clk_get(priv->device, "clk_ptp_ref");
- if (IS_ERR(priv->clk_ptp_ref)) {
- priv->clk_ptp_rate = clk_get_rate(priv->stmmac_clk);
- priv->clk_ptp_ref = NULL;
- netdev_dbg(priv->dev, "PTP uses main clock\n");
- } else {
- clk_prepare_enable(priv->clk_ptp_ref);
- priv->clk_ptp_rate = clk_get_rate(priv->clk_ptp_ref);
- netdev_dbg(priv->dev, "PTP rate %d\n", priv->clk_ptp_rate);
- }
-
priv->adv_ts = 0;
/* Check if adv_ts can be enabled for dwmac 4.x core */
if (priv->plat->has_gmac4 && priv->dma_cap.atime_stamp)
static void stmmac_release_ptp(struct stmmac_priv *priv)
{
- if (priv->clk_ptp_ref)
- clk_disable_unprepare(priv->clk_ptp_ref);
+ if (priv->plat->clk_ptp_ref)
+ clk_disable_unprepare(priv->plat->clk_ptp_ref);
stmmac_ptp_unregister(priv);
}
kfree(priv->tx_skbuff);
}
+/**
+ * stmmac_mac_enable_rx_queues - Enable MAC rx queues
+ * @priv: driver private structure
+ * Description: It is used for enabling the rx queues in the MAC
+ */
+static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv)
+{
+ int rx_count = priv->dma_cap.number_rx_queues;
+ int queue = 0;
+
+ /* If GMAC does not have multiple queues, then this is not necessary*/
+ if (rx_count == 1)
+ return;
+
+ /**
+ * If the core is synthesized with multiple rx queues / multiple
+ * dma channels, then rx queues will be disabled by default.
+ * For now only rx queue 0 is enabled.
+ */
+ priv->hw->mac->rx_queue_enable(priv->hw, queue);
+}
+
/**
* stmmac_dma_operation_mode - HW DMA operation mode
* @priv: driver private structure
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->hw, dev->mtu);
+ /* Initialize MAC RX Queues */
+ if (priv->hw->mac->rx_queue_enable)
+ stmmac_mac_enable_rx_queues(priv);
+
ret = priv->hw->mac->rx_ipc(priv->hw);
if (!ret) {
netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
if ((phyaddr >= 0) && (phyaddr <= 31))
priv->plat->phy_addr = phyaddr;
- priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME);
- if (IS_ERR(priv->stmmac_clk)) {
- netdev_warn(priv->dev, "%s: warning: cannot get CSR clock\n",
- __func__);
- /* If failed to obtain stmmac_clk and specific clk_csr value
- * is NOT passed from the platform, probe fail.
- */
- if (!priv->plat->clk_csr) {
- ret = PTR_ERR(priv->stmmac_clk);
- goto error_clk_get;
- } else {
- priv->stmmac_clk = NULL;
- }
- }
- clk_prepare_enable(priv->stmmac_clk);
-
- priv->pclk = devm_clk_get(priv->device, "pclk");
- if (IS_ERR(priv->pclk)) {
- if (PTR_ERR(priv->pclk) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto error_pclk_get;
- }
- priv->pclk = NULL;
- }
- clk_prepare_enable(priv->pclk);
-
- priv->stmmac_rst = devm_reset_control_get(priv->device,
- STMMAC_RESOURCE_NAME);
- if (IS_ERR(priv->stmmac_rst)) {
- if (PTR_ERR(priv->stmmac_rst) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto error_hw_init;
- }
- dev_info(priv->device, "no reset control found\n");
- priv->stmmac_rst = NULL;
- }
- if (priv->stmmac_rst)
- reset_control_deassert(priv->stmmac_rst);
+ if (priv->plat->stmmac_rst)
+ reset_control_deassert(priv->plat->stmmac_rst);
/* Init MAC and get the capabilities */
ret = stmmac_hw_init(priv);
error_mdio_register:
netif_napi_del(&priv->napi);
error_hw_init:
- clk_disable_unprepare(priv->pclk);
-error_pclk_get:
- clk_disable_unprepare(priv->stmmac_clk);
-error_clk_get:
free_netdev(ndev);
return ret;
stmmac_set_mac(priv->ioaddr, false);
netif_carrier_off(ndev);
unregister_netdev(ndev);
- if (priv->stmmac_rst)
- reset_control_assert(priv->stmmac_rst);
- clk_disable_unprepare(priv->pclk);
- clk_disable_unprepare(priv->stmmac_clk);
+ if (priv->plat->stmmac_rst)
+ reset_control_assert(priv->plat->stmmac_rst);
+ clk_disable_unprepare(priv->plat->pclk);
+ clk_disable_unprepare(priv->plat->stmmac_clk);
if (priv->hw->pcs != STMMAC_PCS_RGMII &&
priv->hw->pcs != STMMAC_PCS_TBI &&
priv->hw->pcs != STMMAC_PCS_RTBI)
stmmac_set_mac(priv->ioaddr, false);
pinctrl_pm_select_sleep_state(priv->device);
/* Disable clock in case of PWM is off */
- clk_disable(priv->pclk);
- clk_disable(priv->stmmac_clk);
+ clk_disable(priv->plat->pclk);
+ clk_disable(priv->plat->stmmac_clk);
}
spin_unlock_irqrestore(&priv->lock, flags);
} else {
pinctrl_pm_select_default_state(priv->device);
/* enable the clk prevously disabled */
- clk_enable(priv->stmmac_clk);
- clk_enable(priv->pclk);
+ clk_enable(priv->plat->stmmac_clk);
+ clk_enable(priv->plat->pclk);
/* reset the phy so that it's ready */
if (priv->mii)
stmmac_mdio_reset(priv->mii);
projects / linux.git / blobdiff