#include <linux/mdio.h>
#include <linux/usb/cdc.h>
#include <linux/suspend.h>
+#include <linux/acpi.h>
/* Information for net-next */
#define NETNEXT_VERSION "08"
/* Information for net */
-#define NET_VERSION "4"
+#define NET_VERSION "5"
#define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
/* SRAM_IMPEDANCE */
#define RX_DRIVING_MASK 0x6000
+/* MAC PASSTHRU */
+#define AD_MASK 0xfee0
+#define EFUSE 0xcfdb
+#define PASS_THRU_MASK 0x1
+
enum rtl_register_content {
_1000bps = 0x10,
_100bps = 0x08,
int (*eee_get)(struct r8152 *, struct ethtool_eee *);
int (*eee_set)(struct r8152 *, struct ethtool_eee *);
bool (*in_nway)(struct r8152 *);
+ void (*autosuspend_en)(struct r8152 *tp, bool enable);
} rtl_ops;
int intr_interval;
return ret;
}
+/* Devices containing RTL8153-AD can support a persistent
+ * host system provided MAC address.
+ * Examples of this are Dell TB15 and Dell WD15 docks
+ */
+static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
+{
+ acpi_status status;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ int ret = -EINVAL;
+ u32 ocp_data;
+ unsigned char buf[6];
+
+ /* test for -AD variant of RTL8153 */
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+ if ((ocp_data & AD_MASK) != 0x1000)
+ return -ENODEV;
+
+ /* test for MAC address pass-through bit */
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+ if ((ocp_data & PASS_THRU_MASK) != 1)
+ return -ENODEV;
+
+ /* returns _AUXMAC_#AABBCCDDEEFF# */
+ status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer);
+ obj = (union acpi_object *)buffer.pointer;
+ if (!ACPI_SUCCESS(status))
+ return -ENODEV;
+ if (obj->type != ACPI_TYPE_BUFFER || obj->string.length != 0x17) {
+ netif_warn(tp, probe, tp->netdev,
+ "Invalid buffer when reading pass-thru MAC addr: "
+ "(%d, %d)\n",
+ obj->type, obj->string.length);
+ goto amacout;
+ }
+ if (strncmp(obj->string.pointer, "_AUXMAC_#", 9) != 0 ||
+ strncmp(obj->string.pointer + 0x15, "#", 1) != 0) {
+ netif_warn(tp, probe, tp->netdev,
+ "Invalid header when reading pass-thru MAC addr\n");
+ goto amacout;
+ }
+ ret = hex2bin(buf, obj->string.pointer + 9, 6);
+ if (!(ret == 0 && is_valid_ether_addr(buf))) {
+ netif_warn(tp, probe, tp->netdev,
+ "Invalid MAC when reading pass-thru MAC addr: "
+ "%d, %pM\n", ret, buf);
+ ret = -EINVAL;
+ goto amacout;
+ }
+ memcpy(sa->sa_data, buf, 6);
+ ether_addr_copy(tp->netdev->dev_addr, sa->sa_data);
+ netif_info(tp, probe, tp->netdev,
+ "Using pass-thru MAC addr %pM\n", sa->sa_data);
+
+amacout:
+ kfree(obj);
+ return ret;
+}
+
static int set_ethernet_addr(struct r8152 *tp)
{
struct net_device *dev = tp->netdev;
if (tp->version == RTL_VER_01)
ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data);
- else
- ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data);
+ else {
+ /* if this is not an RTL8153-AD, no eFuse mac pass thru set,
+ * or system doesn't provide valid _SB.AMAC this will be
+ * be expected to non-zero
+ */
+ ret = vendor_mac_passthru_addr_read(tp, &sa);
+ if (ret < 0)
+ ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data);
+ }
if (ret < 0) {
netif_err(tp, probe, dev, "Get ether addr fail\n");
u32 ocp_data;
u32 wolopts = 0;
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5);
- if (!(ocp_data & LAN_WAKE_EN))
- return 0;
-
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
if (ocp_data & LINK_ON_WAKE_EN)
wolopts |= WAKE_PHY;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
- ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN | LAN_WAKE_EN);
+ ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN);
if (wolopts & WAKE_UCAST)
ocp_data |= UWF_EN;
if (wolopts & WAKE_BCAST)
ocp_data |= BWF_EN;
if (wolopts & WAKE_MCAST)
ocp_data |= MWF_EN;
- if (wolopts & WAKE_ANY)
- ocp_data |= LAN_WAKE_EN;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
if (enable) {
u32 ocp_data;
- r8153_u1u2en(tp, false);
- r8153_u2p3en(tp, false);
-
__rtl_set_wol(tp, WAKE_ANY);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
} else {
+ u32 ocp_data;
+
__rtl_set_wol(tp, tp->saved_wolopts);
+
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+ ocp_data &= ~LINK_OFF_WAKE_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+ }
+}
+
+static void rtl8153_runtime_enable(struct r8152 *tp, bool enable)
+{
+ rtl_runtime_suspend_enable(tp, enable);
+
+ if (enable) {
+ r8153_u1u2en(tp, false);
+ r8153_u2p3en(tp, false);
+ } else {
r8153_u2p3en(tp, true);
r8153_u1u2en(tp, true);
}
napi_disable(&tp->napi);
if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
rtl_stop_rx(tp);
- rtl_runtime_suspend_enable(tp, true);
+ tp->rtl_ops.autosuspend_en(tp, true);
} else {
cancel_delayed_work_sync(&tp->schedule);
tp->rtl_ops.down(tp);
if (netif_running(tp->netdev) && tp->netdev->flags & IFF_UP) {
if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
- rtl_runtime_suspend_enable(tp, false);
+ tp->rtl_ops.autosuspend_en(tp, false);
clear_bit(SELECTIVE_SUSPEND, &tp->flags);
napi_disable(&tp->napi);
set_bit(WORK_ENABLE, &tp->flags);
usb_submit_urb(tp->intr_urb, GFP_KERNEL);
} else if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
if (tp->netdev->flags & IFF_UP)
- rtl_runtime_suspend_enable(tp, false);
+ tp->rtl_ops.autosuspend_en(tp, false);
clear_bit(SELECTIVE_SUSPEND, &tp->flags);
}
ops->eee_get = r8152_get_eee;
ops->eee_set = r8152_set_eee;
ops->in_nway = rtl8152_in_nway;
+ ops->autosuspend_en = rtl_runtime_suspend_enable;
break;
case RTL_VER_03:
ops->eee_get = r8153_get_eee;
ops->eee_set = r8153_set_eee;
ops->in_nway = rtl8153_in_nway;
+ ops->autosuspend_en = rtl8153_runtime_enable;
break;
default:
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
projects / linux.git / blobdiff