#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/scatterlist.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/dma-ep93xx.h>
void *zeropage;
};
-/**
- * struct ep93xx_spi_chip - SPI device hardware settings
- * @spi: back pointer to the SPI device
- * @ops: private chip operations
- */
-struct ep93xx_spi_chip {
- const struct spi_device *spi;
- struct ep93xx_spi_chip_ops *ops;
-};
-
/* converts bits per word to CR0.DSS value */
#define bits_per_word_to_dss(bpw) ((bpw) - 1)
return -EINVAL;
}
-static void ep93xx_spi_cs_control(struct spi_device *spi, bool control)
-{
- struct ep93xx_spi_chip *chip = spi_get_ctldata(spi);
- int value = (spi->mode & SPI_CS_HIGH) ? control : !control;
-
- if (chip->ops && chip->ops->cs_control)
- chip->ops->cs_control(spi, value);
-}
-
-/**
- * ep93xx_spi_setup() - setup an SPI device
- * @spi: SPI device to setup
- *
- * This function sets up SPI device mode, speed etc. Can be called multiple
- * times for a single device. Returns %0 in case of success, negative error in
- * case of failure. When this function returns success, the device is
- * deselected.
- */
-static int ep93xx_spi_setup(struct spi_device *spi)
+static void ep93xx_spi_cs_control(struct spi_device *spi, bool enable)
{
- struct ep93xx_spi *espi = spi_master_get_devdata(spi->master);
- struct ep93xx_spi_chip *chip;
+ if (spi->mode & SPI_CS_HIGH)
+ enable = !enable;
- chip = spi_get_ctldata(spi);
- if (!chip) {
- dev_dbg(&espi->pdev->dev, "initial setup for %s\n",
- spi->modalias);
-
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
- chip->spi = spi;
- chip->ops = spi->controller_data;
-
- if (chip->ops && chip->ops->setup) {
- int ret = chip->ops->setup(spi);
-
- if (ret) {
- kfree(chip);
- return ret;
- }
- }
-
- spi_set_ctldata(spi, chip);
- }
-
- ep93xx_spi_cs_control(spi, false);
- return 0;
+ if (gpio_is_valid(spi->cs_gpio))
+ gpio_set_value(spi->cs_gpio, !enable);
}
-/**
- * ep93xx_spi_cleanup() - cleans up master controller specific state
- * @spi: SPI device to cleanup
- *
- * This function releases master controller specific state for given @spi
- * device.
- */
-static void ep93xx_spi_cleanup(struct spi_device *spi)
-{
- struct ep93xx_spi_chip *chip;
-
- chip = spi_get_ctldata(spi);
- if (chip) {
- if (chip->ops && chip->ops->cleanup)
- chip->ops->cleanup(spi);
- spi_set_ctldata(spi, NULL);
- kfree(chip);
- }
-}
-
-/**
- * ep93xx_spi_chip_setup() - configures hardware according to given @chip
- * @espi: ep93xx SPI controller struct
- * @chip: chip specific settings
- * @speed_hz: transfer speed
- * @bits_per_word: transfer bits_per_word
- */
static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
- const struct ep93xx_spi_chip *chip,
- u32 speed_hz, u8 bits_per_word)
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
{
- u8 dss = bits_per_word_to_dss(bits_per_word);
+ u8 dss = bits_per_word_to_dss(xfer->bits_per_word);
u8 div_cpsr = 0;
u8 div_scr = 0;
u16 cr0;
int err;
- err = ep93xx_spi_calc_divisors(espi, speed_hz, &div_cpsr, &div_scr);
+ err = ep93xx_spi_calc_divisors(espi, xfer->speed_hz,
+ &div_cpsr, &div_scr);
if (err)
return err;
cr0 = div_scr << SSPCR0_SCR_SHIFT;
- cr0 |= (chip->spi->mode & (SPI_CPHA|SPI_CPOL)) << SSPCR0_MODE_SHIFT;
+ cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT;
cr0 |= dss;
dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
- chip->spi->mode, div_cpsr, div_scr, dss);
+ spi->mode, div_cpsr, div_scr, dss);
dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0);
ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);
struct spi_message *msg,
struct spi_transfer *t)
{
- struct ep93xx_spi_chip *chip = spi_get_ctldata(msg->spi);
int err;
msg->state = t;
- err = ep93xx_spi_chip_setup(espi, chip, t->speed_hz, t->bits_per_word);
+ err = ep93xx_spi_chip_setup(espi, msg->spi, t);
if (err) {
dev_err(&espi->pdev->dev,
"failed to setup chip for transfer\n");
struct resource *res;
int irq;
int error;
+ int i;
info = dev_get_platdata(&pdev->dev);
+ if (!info) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -EINVAL;
+ }
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
if (!master)
return -ENOMEM;
- master->setup = ep93xx_spi_setup;
master->transfer_one_message = ep93xx_spi_transfer_one_message;
- master->cleanup = ep93xx_spi_cleanup;
master->bus_num = pdev->id;
- master->num_chipselect = info->num_chipselect;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
+ master->num_chipselect = info->num_chipselect;
+ master->cs_gpios = devm_kzalloc(&master->dev,
+ sizeof(int) * master->num_chipselect,
+ GFP_KERNEL);
+ if (!master->cs_gpios) {
+ error = -ENOMEM;
+ goto fail_release_master;
+ }
+
+ for (i = 0; i < master->num_chipselect; i++) {
+ master->cs_gpios[i] = info->chipselect[i];
+
+ if (!gpio_is_valid(master->cs_gpios[i]))
+ continue;
+
+ error = devm_gpio_request_one(&pdev->dev, master->cs_gpios[i],
+ GPIOF_OUT_INIT_HIGH,
+ "ep93xx-spi");
+ if (error) {
+ dev_err(&pdev->dev, "could not request cs gpio %d\n",
+ master->cs_gpios[i]);
+ goto fail_release_master;
+ }
+ }
+
platform_set_drvdata(pdev, master);
espi = spi_master_get_devdata(master);
projects / linux.git / blobdiff