#!/bin/sh
-USAGE='[start|bad|good|next|reset|visualize|replay|log|run]'
+USAGE='[start|bad|good|skip|next|reset|visualize|replay|log|run]'
LONG_USAGE='git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
reset bisect state and start bisection.
git bisect bad [<rev>]
mark <rev> a known-bad revision.
git bisect good [<rev>...]
mark <rev>... known-good revisions.
+git bisect skip [<rev>...]
+ mark <rev>... untestable revisions.
git bisect next
find next bisection to test and check it out.
git bisect reset [<branch>]
replay bisection log.
git bisect log
show bisect log.
-git bisect skip [<rev>...]
- mark <rev>... untestable revisions.
git bisect run <cmd>...
use <cmd>... to automatically bisect.'
die "'$arg' does not appear to be a valid revision"
break
}
- if [ $bad_seen -eq 0 ]; then
- bad_seen=1
- bisect_write_bad "$rev"
- else
- bisect_write_good "$rev"
- fi
+ case $bad_seen in
+ 0) state='bad' ; bad_seen=1 ;;
+ *) state='good' ;;
+ esac
+ bisect_write "$state" "$rev" 'nolog'
shift
;;
esac
bisect_auto_next
}
-bisect_bad() {
- bisect_autostart
- case "$#" in
- 0)
- rev=$(git rev-parse --verify HEAD) ;;
- 1)
- rev=$(git rev-parse --verify "$1^{commit}") ;;
- *)
- usage ;;
- esac || exit
- bisect_write_bad "$rev"
- echo "git-bisect bad $rev" >>"$GIT_DIR/BISECT_LOG"
- bisect_auto_next
-}
-
-bisect_write_bad() {
- rev="$1"
- echo "$rev" >"$GIT_DIR/refs/bisect/bad"
- echo "# bad: "$(git show-branch $rev) >>"$GIT_DIR/BISECT_LOG"
-}
-
-bisect_good() {
- bisect_autostart
- case "$#" in
- 0) revs=$(git rev-parse --verify HEAD) || exit ;;
- *) revs=$(git rev-parse --revs-only --no-flags "$@") &&
- test '' != "$revs" || die "Bad rev input: $@" ;;
+bisect_write() {
+ state="$1"
+ rev="$2"
+ nolog="$3"
+ case "$state" in
+ bad) tag="$state" ;;
+ good|skip) tag="$state"-"$rev" ;;
+ *) die "Bad bisect_write argument: $state" ;;
esac
- for rev in $revs
- do
- rev=$(git rev-parse --verify "$rev^{commit}") || exit
- bisect_write_good "$rev"
- echo "git-bisect good $rev" >>"$GIT_DIR/BISECT_LOG"
- done
- bisect_auto_next
-}
-
-bisect_write_good() {
- rev="$1"
- echo "$rev" >"$GIT_DIR/refs/bisect/good-$rev"
- echo "# good: "$(git show-branch $rev) >>"$GIT_DIR/BISECT_LOG"
+ echo "$rev" >"$GIT_DIR/refs/bisect/$tag"
+ echo "# $state: "$(git show-branch $rev) >>"$GIT_DIR/BISECT_LOG"
+ test -z "$nolog" && echo "git-bisect $state $rev" >>"$GIT_DIR/BISECT_LOG"
}
-bisect_skip() {
+bisect_state() {
bisect_autostart
- case "$#" in
- 0) revs=$(git rev-parse --verify HEAD) || exit ;;
- *) revs=$(git rev-parse --revs-only --no-flags "$@") &&
- test '' != "$revs" || die "Bad rev input: $@" ;;
+ state=$1
+ case "$#,$state" in
+ 0,*)
+ die "Please call 'bisect_state' with at least one argument." ;;
+ 1,bad|1,good|1,skip)
+ rev=$(git rev-parse --verify HEAD) ||
+ die "Bad rev input: HEAD"
+ bisect_write "$state" "$rev" ;;
+ 2,bad)
+ rev=$(git rev-parse --verify "$2^{commit}") ||
+ die "Bad rev input: $2"
+ bisect_write "$state" "$rev" ;;
+ *,good|*,skip)
+ shift
+ revs=$(git rev-parse --revs-only --no-flags "$@") &&
+ test '' != "$revs" || die "Bad rev input: $@"
+ for rev in $revs
+ do
+ rev=$(git rev-parse --verify "$rev^{commit}") ||
+ die "Bad rev commit: $rev^{commit}"
+ bisect_write "$state" "$rev"
+ done ;;
+ *)
+ usage ;;
esac
- for rev in $revs
- do
- rev=$(git rev-parse --verify "$rev^{commit}") || exit
- bisect_write_skip "$rev"
- echo "git-bisect skip $rev" >>"$GIT_DIR/BISECT_LOG"
- done
bisect_auto_next
}
-bisect_write_skip() {
- rev="$1"
- echo "$rev" >"$GIT_DIR/refs/bisect/skip-$rev"
- echo "# skip: "$(git show-branch $rev) >>"$GIT_DIR/BISECT_LOG"
-}
-
bisect_next_check() {
missing_good= missing_bad=
git show-ref -q --verify refs/bisect/bad || missing_bad=t
else
branch=master
fi ;;
- 1) git show-ref --verify --quiet -- "refs/heads/$1" || {
- echo >&2 "$1 does not seem to be a valid branch"
- exit 1
- }
+ 1) git show-ref --verify --quiet -- "refs/heads/$1" ||
+ die "$1 does not seem to be a valid branch"
branch="$1" ;;
*)
usage ;;
}
bisect_replay () {
- test -r "$1" || {
- echo >&2 "cannot read $1 for replaying"
- exit 1
- }
+ test -r "$1" || die "cannot read $1 for replaying"
bisect_reset
while read bisect command rev
do
case "$command" in
start)
cmd="bisect_start $rev"
- eval "$cmd"
- ;;
- good)
- bisect_write_good "$rev"
- echo "git-bisect good $rev" >>"$GIT_DIR/BISECT_LOG"
- ;;
- bad)
- bisect_write_bad "$rev"
- echo "git-bisect bad $rev" >>"$GIT_DIR/BISECT_LOG"
- ;;
- skip)
- bisect_write_skip "$rev"
- echo "git-bisect skip $rev" >>"$GIT_DIR/BISECT_LOG"
- ;;
+ eval "$cmd" ;;
+ good|bad|skip)
+ bisect_write "$command" "$rev" ;;
*)
- echo >&2 "?? what are you talking about?"
- exit 1 ;;
+ die "?? what are you talking about?" ;;
esac
done <"$1"
bisect_auto_next
exit $res
fi
- # Use "bisect_good" or "bisect_bad"
- # depending on run success or failure.
- if [ $res -gt 0 ]; then
- next_bisect='bisect_bad'
+ # Find current state depending on run success or failure.
+ # A special exit code of 125 means cannot test.
+ if [ $res -eq 125 ]; then
+ state='skip'
+ elif [ $res -gt 0 ]; then
+ state='bad'
else
- next_bisect='bisect_good'
+ state='good'
fi
- # We have to use a subshell because bisect_good or
- # bisect_bad functions can exit.
- ( $next_bisect > "$GIT_DIR/BISECT_RUN" )
+ # We have to use a subshell because "bisect_state" can exit.
+ ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
res=$?
cat "$GIT_DIR/BISECT_RUN"
+ if grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
+ > /dev/null; then
+ echo >&2 "bisect run cannot continue any more"
+ exit $res
+ fi
+
if [ $res -ne 0 ]; then
echo >&2 "bisect run failed:"
- echo >&2 "$next_bisect exited with error code $res"
+ echo >&2 "'bisect_state $state' exited with error code $res"
exit $res
fi
case "$cmd" in
start)
bisect_start "$@" ;;
- bad)
- bisect_bad "$@" ;;
- good)
- bisect_good "$@" ;;
- skip)
- bisect_skip "$@" ;;
+ bad|good|skip)
+ bisect_state "$cmd" "$@" ;;
next)
# Not sure we want "next" at the UI level anymore.
bisect_next "$@" ;;
projects / git.git / blobdiff