tristate "Common Applications Kept Enhanced (CAKE)"
help
Say Y here if you want to use the Common Applications Kept Enhanced
- (CAKE) queue management algorithm.
+ (CAKE) queue management algorithm.
To compile this driver as a module, choose M here: the module
will be called sch_cake.
config NET_ACT_POLICE
tristate "Traffic Policing"
- depends on NET_CLS_ACT
- ---help---
+ depends on NET_CLS_ACT
+ ---help---
Say Y here if you want to do traffic policing, i.e. strict
bandwidth limiting. This action replaces the existing policing
module.
module will be called act_police.
config NET_ACT_GACT
- tristate "Generic actions"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Generic actions"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to take generic actions such as dropping and
accepting packets.
module will be called act_gact.
config GACT_PROB
- bool "Probability support"
- depends on NET_ACT_GACT
- ---help---
+ bool "Probability support"
+ depends on NET_ACT_GACT
+ ---help---
Say Y here to use the generic action randomly or deterministically.
config NET_ACT_MIRRED
- tristate "Redirecting and Mirroring"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Redirecting and Mirroring"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to allow packets to be mirrored or redirected to
other devices.
module will be called act_mirred.
config NET_ACT_SAMPLE
- tristate "Traffic Sampling"
- depends on NET_CLS_ACT
- select PSAMPLE
- ---help---
+ tristate "Traffic Sampling"
+ depends on NET_CLS_ACT
+ select PSAMPLE
+ ---help---
Say Y here to allow packet sampling tc action. The packet sample
action consists of statistically choosing packets and sampling
them using the psample module.
module will be called act_sample.
config NET_ACT_IPT
- tristate "IPtables targets"
- depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
- ---help---
+ tristate "IPtables targets"
+ depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
+ ---help---
Say Y here to be able to invoke iptables targets after successful
classification.
module will be called act_ipt.
config NET_ACT_NAT
- tristate "Stateless NAT"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Stateless NAT"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to do stateless NAT on IPv4 packets. You should use
netfilter for NAT unless you know what you are doing.
module will be called act_nat.
config NET_ACT_PEDIT
- tristate "Packet Editing"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Packet Editing"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here if you want to mangle the content of packets.
To compile this code as a module, choose M here: the
module will be called act_pedit.
config NET_ACT_SIMP
- tristate "Simple Example (Debug)"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Simple Example (Debug)"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to add a simple action for demonstration purposes.
It is meant as an example and for debugging purposes. It will
print a configured policy string followed by the packet count
module will be called act_simple.
config NET_ACT_SKBEDIT
- tristate "SKB Editing"
- depends on NET_CLS_ACT
- ---help---
+ tristate "SKB Editing"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to change skb priority or queue_mapping settings.
If unsure, say N.
module will be called act_skbedit.
config NET_ACT_CSUM
- tristate "Checksum Updating"
- depends on NET_CLS_ACT && INET
- select LIBCRC32C
- ---help---
+ tristate "Checksum Updating"
+ depends on NET_CLS_ACT && INET
+ select LIBCRC32C
+ ---help---
Say Y here to update some common checksum after some direct
packet alterations.
module will be called act_mpls.
config NET_ACT_VLAN
- tristate "Vlan manipulation"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Vlan manipulation"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to push or pop vlan headers.
If unsure, say N.
module will be called act_vlan.
config NET_ACT_BPF
- tristate "BPF based action"
- depends on NET_CLS_ACT
- ---help---
+ tristate "BPF based action"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to execute BPF code on packets. The BPF code will decide
if the packet should be dropped or not.
module will be called act_bpf.
config NET_ACT_CONNMARK
- tristate "Netfilter Connection Mark Retriever"
- depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
- depends on NF_CONNTRACK && NF_CONNTRACK_MARK
- ---help---
+ tristate "Netfilter Connection Mark Retriever"
+ depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
+ depends on NF_CONNTRACK && NF_CONNTRACK_MARK
+ ---help---
Say Y here to allow retrieving of conn mark
If unsure, say N.
module will be called act_connmark.
config NET_ACT_CTINFO
- tristate "Netfilter Connection Mark Actions"
- depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
- depends on NF_CONNTRACK && NF_CONNTRACK_MARK
- help
+ tristate "Netfilter Connection Mark Actions"
+ depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
+ depends on NF_CONNTRACK && NF_CONNTRACK_MARK
+ help
Say Y here to allow transfer of a connmark stored information.
Current actions transfer connmark stored DSCP into
ipv4/v6 diffserv and/or to transfer connmark to packet
module will be called act_ctinfo.
config NET_ACT_SKBMOD
- tristate "skb data modification action"
- depends on NET_CLS_ACT
- ---help---
- Say Y here to allow modification of skb data
+ tristate "skb data modification action"
+ depends on NET_CLS_ACT
+ ---help---
+ Say Y here to allow modification of skb data
- If unsure, say N.
+ If unsure, say N.
- To compile this code as a module, choose M here: the
- module will be called act_skbmod.
+ To compile this code as a module, choose M here: the
+ module will be called act_skbmod.
config NET_ACT_IFE
- tristate "Inter-FE action based on IETF ForCES InterFE LFB"
- depends on NET_CLS_ACT
- select NET_IFE
- ---help---
+ tristate "Inter-FE action based on IETF ForCES InterFE LFB"
+ depends on NET_CLS_ACT
+ select NET_IFE
+ ---help---
Say Y here to allow for sourcing and terminating metadata
For details refer to netdev01 paper:
"Distributing Linux Traffic Control Classifier-Action Subsystem"
module will be called act_ife.
config NET_ACT_TUNNEL_KEY
- tristate "IP tunnel metadata manipulation"
- depends on NET_CLS_ACT
- ---help---
+ tristate "IP tunnel metadata manipulation"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to set/release ip tunnel metadata.
If unsure, say N.
module will be called act_tunnel_key.
config NET_ACT_CT
- tristate "connection tracking tc action"
- depends on NET_CLS_ACT && NF_CONNTRACK && NF_NAT
- help
+ tristate "connection tracking tc action"
+ depends on NET_CLS_ACT && NF_CONNTRACK && NF_NAT
+ help
Say Y here to allow sending the packets to conntrack module.
If unsure, say N.
module will be called act_ct.
config NET_IFE_SKBMARK
- tristate "Support to encoding decoding skb mark on IFE action"
- depends on NET_ACT_IFE
+ tristate "Support to encoding decoding skb mark on IFE action"
+ depends on NET_ACT_IFE
config NET_IFE_SKBPRIO
- tristate "Support to encoding decoding skb prio on IFE action"
- depends on NET_ACT_IFE
+ tristate "Support to encoding decoding skb prio on IFE action"
+ depends on NET_ACT_IFE
config NET_IFE_SKBTCINDEX
- tristate "Support to encoding decoding skb tcindex on IFE action"
- depends on NET_ACT_IFE
+ tristate "Support to encoding decoding skb tcindex on IFE action"
+ depends on NET_ACT_IFE
config NET_TC_SKB_EXT
bool "TC recirculation support"
depends on NET_CLS_ACT
- default y if NET_CLS_ACT
select SKB_EXTENSIONS
help
projects / linux.git / blobdiff