# Author: Jesper Dangaaard Brouer
# License: GPL
+set -o errexit
+
## -- General shell logging cmds --
function err() {
local exitcode=$1
function proc_cmd() {
local result
local proc_file=$1
+ local status=0
# after shift, the remaining args are contained in $@
shift
local proc_ctrl=${PROC_DIR}/$proc_file
echo "cmd: $@ > $proc_ctrl"
fi
# Quoting of "$@" is important for space expansion
- echo "$@" > "$proc_ctrl"
- local status=$?
+ echo "$@" > "$proc_ctrl" || status=$?
- result=$(grep "Result: OK:" $proc_ctrl)
- # Due to pgctrl, cannot use exit code $? from grep
- if [[ "$result" == "" ]]; then
- grep "Result:" $proc_ctrl >&2
+ if [[ "$proc_file" != "pgctrl" ]]; then
+ result=$(grep "Result: OK:" $proc_ctrl) || true
+ if [[ "$result" == "" ]]; then
+ grep "Result:" $proc_ctrl >&2
+ fi
fi
if (( $status != 0 )); then
err 5 "Write error($status) occurred cmd: \"$@ > $proc_ctrl\""
fi
}
+[[ $EUID -eq 0 ]] && trap 'pg_ctrl "reset"' EXIT
+
## -- General shell tricks --
function root_check_run_with_sudo() {
echo $node_cpu_list
}
+# Check $1 is in between $2, $3 ($2 <= $1 <= $3)
+function in_between() { [[ ($1 -ge $2) && ($1 -le $3) ]] ; }
+
+# Extend shrunken IPv6 address.
+# fe80::42:bcff:fe84:e10a => fe80:0:0:0:42:bcff:fe84:e10a
+function extend_addr6()
+{
+ local addr=$1
+ local sep=: sep2=::
+ local sep_cnt=$(tr -cd $sep <<< $1 | wc -c)
+ local shrink
+
+ # separator count should be (2 <= $sep_cnt <= 7)
+ if ! (in_between $sep_cnt 2 7); then
+ err 5 "Invalid IP6 address: $1"
+ fi
+
+ # if shrink '::' occurs multiple, it's malformed.
+ shrink=( $(egrep -o "$sep{2,}" <<< $addr) )
+ if [[ ${#shrink[@]} -ne 0 ]]; then
+ if [[ ${#shrink[@]} -gt 1 || ( ${shrink[0]} != $sep2 ) ]]; then
+ err 5 "Invalid IP6 address: $1"
+ fi
+ fi
+
+ # add 0 at begin & end, and extend addr by adding :0
+ [[ ${addr:0:1} == $sep ]] && addr=0${addr}
+ [[ ${addr: -1} == $sep ]] && addr=${addr}0
+ echo "${addr/$sep2/$(printf ':0%.s' $(seq $[8-sep_cnt])):}"
+}
+
+# Given a single IP(v4/v6) address, whether it is valid.
+function validate_addr()
+{
+ # check function is called with (funcname)6
+ [[ ${FUNCNAME[1]: -1} == 6 ]] && local IP6=6
+ local bitlen=$[ IP6 ? 128 : 32 ]
+ local len=$[ IP6 ? 8 : 4 ]
+ local max=$[ 2**(len*2)-1 ]
+ local net prefix
+ local addr sep
+
+ IFS='/' read net prefix <<< $1
+ [[ $IP6 ]] && net=$(extend_addr6 $net)
+
+ # if prefix exists, check (0 <= $prefix <= $bitlen)
+ if [[ -n $prefix ]]; then
+ if ! (in_between $prefix 0 $bitlen); then
+ err 5 "Invalid prefix: /$prefix"
+ fi
+ fi
+
+ # set separator for each IP(v4/v6)
+ [[ $IP6 ]] && sep=: || sep=.
+ IFS=$sep read -a addr <<< $net
+
+ # array length
+ if [[ ${#addr[@]} != $len ]]; then
+ err 5 "Invalid IP$IP6 address: $1"
+ fi
+
+ # check each digit (0 <= $digit <= $max)
+ for digit in "${addr[@]}"; do
+ [[ $IP6 ]] && digit=$[ 16#$digit ]
+ if ! (in_between $digit 0 $max); then
+ err 5 "Invalid IP$IP6 address: $1"
+ fi
+ done
+
+ return 0
+}
+
+function validate_addr6() { validate_addr $@ ; }
+
+# Given a single IP(v4/v6) or CIDR, return minimum and maximum IP addr.
+function parse_addr()
+{
+ # check function is called with (funcname)6
+ [[ ${FUNCNAME[1]: -1} == 6 ]] && local IP6=6
+ local net prefix
+ local min_ip max_ip
+
+ IFS='/' read net prefix <<< $1
+ [[ $IP6 ]] && net=$(extend_addr6 $net)
+
+ if [[ -z $prefix ]]; then
+ min_ip=$net
+ max_ip=$net
+ else
+ # defining array for converting Decimal 2 Binary
+ # 00000000 00000001 00000010 00000011 00000100 ...
+ local d2b='{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}'
+ [[ $IP6 ]] && d2b+=$d2b
+ eval local D2B=($d2b)
+
+ local bitlen=$[ IP6 ? 128 : 32 ]
+ local remain=$[ bitlen-prefix ]
+ local octet=$[ IP6 ? 16 : 8 ]
+ local min_mask max_mask
+ local min max
+ local ip_bit
+ local ip sep
+
+ # set separator for each IP(v4/v6)
+ [[ $IP6 ]] && sep=: || sep=.
+ IFS=$sep read -ra ip <<< $net
+
+ min_mask="$(printf '1%.s' $(seq $prefix))$(printf '0%.s' $(seq $remain))"
+ max_mask="$(printf '0%.s' $(seq $prefix))$(printf '1%.s' $(seq $remain))"
+
+ # calculate min/max ip with &,| operator
+ for i in "${!ip[@]}"; do
+ digit=$[ IP6 ? 16#${ip[$i]} : ${ip[$i]} ]
+ ip_bit=${D2B[$digit]}
+
+ idx=$[ octet*i ]
+ min[$i]=$[ 2#$ip_bit & 2#${min_mask:$idx:$octet} ]
+ max[$i]=$[ 2#$ip_bit | 2#${max_mask:$idx:$octet} ]
+ [[ $IP6 ]] && { min[$i]=$(printf '%X' ${min[$i]});
+ max[$i]=$(printf '%X' ${max[$i]}); }
+ done
+
+ min_ip=$(IFS=$sep; echo "${min[*]}")
+ max_ip=$(IFS=$sep; echo "${max[*]}")
+ fi
+
+ echo $min_ip $max_ip
+}
+
+function parse_addr6() { parse_addr $@ ; }
+
# Given a single or range of port(s), return minimum and maximum port number.
function parse_ports()
{
local min_port=$1
local max_port=$2
- # 0 < port < 65536
- if [[ $min_port -gt 0 && $min_port -lt 65536 ]]; then
- if [[ $max_port -gt 0 && $max_port -lt 65536 ]]; then
+ # 1 <= port <= 65535
+ if (in_between $min_port 1 65535); then
+ if (in_between $max_port 1 65535); then
if [[ $min_port -le $max_port ]]; then
return 0
fi
projects / linux.git / blobdiff