-#include <windows.h>
+/*
+ * SSH backend.
+ */
+
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <assert.h>
+#include <limits.h>
+#include <signal.h>
#include "putty.h"
#include "tree234.h"
#include "ssh.h"
+#ifndef NO_GSSAPI
+#include "sshgssc.h"
+#include "sshgss.h"
+#endif
#ifndef FALSE
#define FALSE 0
#define TRUE 1
#endif
-#define logevent(s) { logevent(s); \
- if ((flags & FLAG_STDERR) && (flags & FLAG_VERBOSE)) \
- { fprintf(stderr, "%s\n", s); fflush(stderr); } }
-
-/* logevent, only printf-formatted. */
-void logeventf(char *fmt, ...)
-{
- va_list ap;
- char stuff[200];
-
- va_start(ap, fmt);
- vsprintf(stuff, fmt, ap);
- va_end(ap);
- logevent(stuff);
-}
-
-#define bombout(msg) ( ssh_state = SSH_STATE_CLOSED, \
- (s ? sk_close(s), s = NULL : 0), \
- logeventf msg, connection_fatal msg )
-
#define SSH1_MSG_DISCONNECT 1 /* 0x1 */
#define SSH1_SMSG_PUBLIC_KEY 2 /* 0x2 */
#define SSH1_CMSG_SESSION_KEY 3 /* 0x3 */
#define SSH1_SMSG_AUTH_CCARD_CHALLENGE 71 /* 0x47 */
#define SSH1_CMSG_AUTH_CCARD_RESPONSE 72 /* 0x48 */
+#define SSH1_AUTH_RHOSTS 1 /* 0x1 */
+#define SSH1_AUTH_RSA 2 /* 0x2 */
+#define SSH1_AUTH_PASSWORD 3 /* 0x3 */
+#define SSH1_AUTH_RHOSTS_RSA 4 /* 0x4 */
#define SSH1_AUTH_TIS 5 /* 0x5 */
#define SSH1_AUTH_CCARD 16 /* 0x10 */
#define SSH2_MSG_KEX_DH_GEX_GROUP 31 /* 0x1f */
#define SSH2_MSG_KEX_DH_GEX_INIT 32 /* 0x20 */
#define SSH2_MSG_KEX_DH_GEX_REPLY 33 /* 0x21 */
+#define SSH2_MSG_KEXRSA_PUBKEY 30 /* 0x1e */
+#define SSH2_MSG_KEXRSA_SECRET 31 /* 0x1f */
+#define SSH2_MSG_KEXRSA_DONE 32 /* 0x20 */
#define SSH2_MSG_USERAUTH_REQUEST 50 /* 0x32 */
#define SSH2_MSG_USERAUTH_FAILURE 51 /* 0x33 */
#define SSH2_MSG_USERAUTH_SUCCESS 52 /* 0x34 */
#define SSH2_MSG_CHANNEL_REQUEST 98 /* 0x62 */
#define SSH2_MSG_CHANNEL_SUCCESS 99 /* 0x63 */
#define SSH2_MSG_CHANNEL_FAILURE 100 /* 0x64 */
+#define SSH2_MSG_USERAUTH_GSSAPI_RESPONSE 60
+#define SSH2_MSG_USERAUTH_GSSAPI_TOKEN 61
+#define SSH2_MSG_USERAUTH_GSSAPI_EXCHANGE_COMPLETE 63
+#define SSH2_MSG_USERAUTH_GSSAPI_ERROR 64
+#define SSH2_MSG_USERAUTH_GSSAPI_ERRTOK 65
+#define SSH2_MSG_USERAUTH_GSSAPI_MIC 66
/*
* Packet type contexts, so that ssh2_pkt_type can correctly decode
* the ambiguous type numbers back into the correct type strings.
*/
-#define SSH2_PKTCTX_DHGROUP1 0x0001
-#define SSH2_PKTCTX_DHGEX 0x0002
-#define SSH2_PKTCTX_PUBLICKEY 0x0010
-#define SSH2_PKTCTX_PASSWORD 0x0020
-#define SSH2_PKTCTX_KBDINTER 0x0040
-#define SSH2_PKTCTX_AUTH_MASK 0x00F0
+typedef enum {
+ SSH2_PKTCTX_NOKEX,
+ SSH2_PKTCTX_DHGROUP,
+ SSH2_PKTCTX_DHGEX,
+ SSH2_PKTCTX_RSAKEX
+} Pkt_KCtx;
+typedef enum {
+ SSH2_PKTCTX_NOAUTH,
+ SSH2_PKTCTX_PUBLICKEY,
+ SSH2_PKTCTX_PASSWORD,
+ SSH2_PKTCTX_GSSAPI,
+ SSH2_PKTCTX_KBDINTER
+} Pkt_ACtx;
#define SSH2_DISCONNECT_HOST_NOT_ALLOWED_TO_CONNECT 1 /* 0x1 */
#define SSH2_DISCONNECT_PROTOCOL_ERROR 2 /* 0x2 */
static const char *const ssh2_disconnect_reasons[] = {
NULL,
- "SSH_DISCONNECT_HOST_NOT_ALLOWED_TO_CONNECT",
- "SSH_DISCONNECT_PROTOCOL_ERROR",
- "SSH_DISCONNECT_KEY_EXCHANGE_FAILED",
- "SSH_DISCONNECT_HOST_AUTHENTICATION_FAILED",
- "SSH_DISCONNECT_MAC_ERROR",
- "SSH_DISCONNECT_COMPRESSION_ERROR",
- "SSH_DISCONNECT_SERVICE_NOT_AVAILABLE",
- "SSH_DISCONNECT_PROTOCOL_VERSION_NOT_SUPPORTED",
- "SSH_DISCONNECT_HOST_KEY_NOT_VERIFIABLE",
- "SSH_DISCONNECT_CONNECTION_LOST",
- "SSH_DISCONNECT_BY_APPLICATION",
- "SSH_DISCONNECT_TOO_MANY_CONNECTIONS",
- "SSH_DISCONNECT_AUTH_CANCELLED_BY_USER",
- "SSH_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE",
- "SSH_DISCONNECT_ILLEGAL_USER_NAME",
+ "host not allowed to connect",
+ "protocol error",
+ "key exchange failed",
+ "host authentication failed",
+ "MAC error",
+ "compression error",
+ "service not available",
+ "protocol version not supported",
+ "host key not verifiable",
+ "connection lost",
+ "by application",
+ "too many connections",
+ "auth cancelled by user",
+ "no more auth methods available",
+ "illegal user name",
};
#define SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED 1 /* 0x1 */
#define BUG_CHOKES_ON_RSA 8
#define BUG_SSH2_RSA_PADDING 16
#define BUG_SSH2_DERIVEKEY 32
-#define BUG_SSH2_DH_GEX 64
+#define BUG_SSH2_REKEY 64
+#define BUG_SSH2_PK_SESSIONID 128
+#define BUG_SSH2_MAXPKT 256
+#define BUG_CHOKES_ON_SSH2_IGNORE 512
+#define BUG_CHOKES_ON_WINADJ 1024
+
+/*
+ * Codes for terminal modes.
+ * Most of these are the same in SSH-1 and SSH-2.
+ * This list is derived from RFC 4254 and
+ * SSH-1 RFC-1.2.31.
+ */
+static const struct {
+ const char* const mode;
+ int opcode;
+ enum { TTY_OP_CHAR, TTY_OP_BOOL } type;
+} ssh_ttymodes[] = {
+ /* "V" prefix discarded for special characters relative to SSH specs */
+ { "INTR", 1, TTY_OP_CHAR },
+ { "QUIT", 2, TTY_OP_CHAR },
+ { "ERASE", 3, TTY_OP_CHAR },
+ { "KILL", 4, TTY_OP_CHAR },
+ { "EOF", 5, TTY_OP_CHAR },
+ { "EOL", 6, TTY_OP_CHAR },
+ { "EOL2", 7, TTY_OP_CHAR },
+ { "START", 8, TTY_OP_CHAR },
+ { "STOP", 9, TTY_OP_CHAR },
+ { "SUSP", 10, TTY_OP_CHAR },
+ { "DSUSP", 11, TTY_OP_CHAR },
+ { "REPRINT", 12, TTY_OP_CHAR },
+ { "WERASE", 13, TTY_OP_CHAR },
+ { "LNEXT", 14, TTY_OP_CHAR },
+ { "FLUSH", 15, TTY_OP_CHAR },
+ { "SWTCH", 16, TTY_OP_CHAR },
+ { "STATUS", 17, TTY_OP_CHAR },
+ { "DISCARD", 18, TTY_OP_CHAR },
+ { "IGNPAR", 30, TTY_OP_BOOL },
+ { "PARMRK", 31, TTY_OP_BOOL },
+ { "INPCK", 32, TTY_OP_BOOL },
+ { "ISTRIP", 33, TTY_OP_BOOL },
+ { "INLCR", 34, TTY_OP_BOOL },
+ { "IGNCR", 35, TTY_OP_BOOL },
+ { "ICRNL", 36, TTY_OP_BOOL },
+ { "IUCLC", 37, TTY_OP_BOOL },
+ { "IXON", 38, TTY_OP_BOOL },
+ { "IXANY", 39, TTY_OP_BOOL },
+ { "IXOFF", 40, TTY_OP_BOOL },
+ { "IMAXBEL", 41, TTY_OP_BOOL },
+ { "ISIG", 50, TTY_OP_BOOL },
+ { "ICANON", 51, TTY_OP_BOOL },
+ { "XCASE", 52, TTY_OP_BOOL },
+ { "ECHO", 53, TTY_OP_BOOL },
+ { "ECHOE", 54, TTY_OP_BOOL },
+ { "ECHOK", 55, TTY_OP_BOOL },
+ { "ECHONL", 56, TTY_OP_BOOL },
+ { "NOFLSH", 57, TTY_OP_BOOL },
+ { "TOSTOP", 58, TTY_OP_BOOL },
+ { "IEXTEN", 59, TTY_OP_BOOL },
+ { "ECHOCTL", 60, TTY_OP_BOOL },
+ { "ECHOKE", 61, TTY_OP_BOOL },
+ { "PENDIN", 62, TTY_OP_BOOL }, /* XXX is this a real mode? */
+ { "OPOST", 70, TTY_OP_BOOL },
+ { "OLCUC", 71, TTY_OP_BOOL },
+ { "ONLCR", 72, TTY_OP_BOOL },
+ { "OCRNL", 73, TTY_OP_BOOL },
+ { "ONOCR", 74, TTY_OP_BOOL },
+ { "ONLRET", 75, TTY_OP_BOOL },
+ { "CS7", 90, TTY_OP_BOOL },
+ { "CS8", 91, TTY_OP_BOOL },
+ { "PARENB", 92, TTY_OP_BOOL },
+ { "PARODD", 93, TTY_OP_BOOL }
+};
-static int ssh_pkt_ctx = 0;
+/* Miscellaneous other tty-related constants. */
+#define SSH_TTY_OP_END 0
+/* The opcodes for ISPEED/OSPEED differ between SSH-1 and SSH-2. */
+#define SSH1_TTY_OP_ISPEED 192
+#define SSH1_TTY_OP_OSPEED 193
+#define SSH2_TTY_OP_ISPEED 128
+#define SSH2_TTY_OP_OSPEED 129
+
+/* Helper functions for parsing tty-related config. */
+static unsigned int ssh_tty_parse_specchar(char *s)
+{
+ unsigned int ret;
+ if (*s) {
+ char *next = NULL;
+ ret = ctrlparse(s, &next);
+ if (!next) ret = s[0];
+ } else {
+ ret = 255; /* special value meaning "don't set" */
+ }
+ return ret;
+}
+static unsigned int ssh_tty_parse_boolean(char *s)
+{
+ if (stricmp(s, "yes") == 0 ||
+ stricmp(s, "on") == 0 ||
+ stricmp(s, "true") == 0 ||
+ stricmp(s, "+") == 0)
+ return 1; /* true */
+ else if (stricmp(s, "no") == 0 ||
+ stricmp(s, "off") == 0 ||
+ stricmp(s, "false") == 0 ||
+ stricmp(s, "-") == 0)
+ return 0; /* false */
+ else
+ return (atoi(s) != 0);
+}
#define translate(x) if (type == x) return #x
-#define translatec(x,ctx) if (type == x && (ssh_pkt_ctx & ctx)) return #x
-char *ssh1_pkt_type(int type)
+#define translatek(x,ctx) if (type == x && (pkt_kctx == ctx)) return #x
+#define translatea(x,ctx) if (type == x && (pkt_actx == ctx)) return #x
+static char *ssh1_pkt_type(int type)
{
translate(SSH1_MSG_DISCONNECT);
translate(SSH1_SMSG_PUBLIC_KEY);
translate(SSH1_CMSG_AUTH_CCARD_RESPONSE);
return "unknown";
}
-char *ssh2_pkt_type(int type)
+static char *ssh2_pkt_type(Pkt_KCtx pkt_kctx, Pkt_ACtx pkt_actx, int type)
{
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_RESPONSE,SSH2_PKTCTX_GSSAPI);
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_TOKEN,SSH2_PKTCTX_GSSAPI);
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_EXCHANGE_COMPLETE,SSH2_PKTCTX_GSSAPI);
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_ERROR,SSH2_PKTCTX_GSSAPI);
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_ERRTOK,SSH2_PKTCTX_GSSAPI);
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_MIC, SSH2_PKTCTX_GSSAPI);
translate(SSH2_MSG_DISCONNECT);
translate(SSH2_MSG_IGNORE);
translate(SSH2_MSG_UNIMPLEMENTED);
translate(SSH2_MSG_SERVICE_ACCEPT);
translate(SSH2_MSG_KEXINIT);
translate(SSH2_MSG_NEWKEYS);
- translatec(SSH2_MSG_KEXDH_INIT, SSH2_PKTCTX_DHGROUP1);
- translatec(SSH2_MSG_KEXDH_REPLY, SSH2_PKTCTX_DHGROUP1);
- translatec(SSH2_MSG_KEX_DH_GEX_REQUEST, SSH2_PKTCTX_DHGEX);
- translatec(SSH2_MSG_KEX_DH_GEX_GROUP, SSH2_PKTCTX_DHGEX);
- translatec(SSH2_MSG_KEX_DH_GEX_INIT, SSH2_PKTCTX_DHGEX);
- translatec(SSH2_MSG_KEX_DH_GEX_REPLY, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEXDH_INIT, SSH2_PKTCTX_DHGROUP);
+ translatek(SSH2_MSG_KEXDH_REPLY, SSH2_PKTCTX_DHGROUP);
+ translatek(SSH2_MSG_KEX_DH_GEX_REQUEST, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEX_DH_GEX_GROUP, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEX_DH_GEX_INIT, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEX_DH_GEX_REPLY, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEXRSA_PUBKEY, SSH2_PKTCTX_RSAKEX);
+ translatek(SSH2_MSG_KEXRSA_SECRET, SSH2_PKTCTX_RSAKEX);
+ translatek(SSH2_MSG_KEXRSA_DONE, SSH2_PKTCTX_RSAKEX);
translate(SSH2_MSG_USERAUTH_REQUEST);
translate(SSH2_MSG_USERAUTH_FAILURE);
translate(SSH2_MSG_USERAUTH_SUCCESS);
translate(SSH2_MSG_USERAUTH_BANNER);
- translatec(SSH2_MSG_USERAUTH_PK_OK, SSH2_PKTCTX_PUBLICKEY);
- translatec(SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ, SSH2_PKTCTX_PASSWORD);
- translatec(SSH2_MSG_USERAUTH_INFO_REQUEST, SSH2_PKTCTX_KBDINTER);
- translatec(SSH2_MSG_USERAUTH_INFO_RESPONSE, SSH2_PKTCTX_KBDINTER);
+ translatea(SSH2_MSG_USERAUTH_PK_OK, SSH2_PKTCTX_PUBLICKEY);
+ translatea(SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ, SSH2_PKTCTX_PASSWORD);
+ translatea(SSH2_MSG_USERAUTH_INFO_REQUEST, SSH2_PKTCTX_KBDINTER);
+ translatea(SSH2_MSG_USERAUTH_INFO_RESPONSE, SSH2_PKTCTX_KBDINTER);
translate(SSH2_MSG_GLOBAL_REQUEST);
translate(SSH2_MSG_REQUEST_SUCCESS);
translate(SSH2_MSG_REQUEST_FAILURE);
#undef translate
#undef translatec
-#define GET_32BIT(cp) \
- (((unsigned long)(unsigned char)(cp)[0] << 24) | \
- ((unsigned long)(unsigned char)(cp)[1] << 16) | \
- ((unsigned long)(unsigned char)(cp)[2] << 8) | \
- ((unsigned long)(unsigned char)(cp)[3]))
-
-#define PUT_32BIT(cp, value) { \
- (cp)[0] = (unsigned char)((value) >> 24); \
- (cp)[1] = (unsigned char)((value) >> 16); \
- (cp)[2] = (unsigned char)((value) >> 8); \
- (cp)[3] = (unsigned char)(value); }
-
-enum { PKT_END, PKT_INT, PKT_CHAR, PKT_DATA, PKT_STR, PKT_BIGNUM };
-
-/* Coroutine mechanics for the sillier bits of the code */
-#define crBegin1 static int crLine = 0;
-#define crBegin2 switch(crLine) { case 0:;
-#define crBegin crBegin1; crBegin2;
-#define crFinish(z) } crLine = 0; return (z)
-#define crFinishV } crLine = 0; return
+/* Enumeration values for fields in SSH-1 packets */
+enum {
+ PKT_END, PKT_INT, PKT_CHAR, PKT_DATA, PKT_STR, PKT_BIGNUM,
+ /* These values are for communicating relevant semantics of
+ * fields to the packet logging code. */
+ PKTT_OTHER, PKTT_PASSWORD, PKTT_DATA
+};
+
+/*
+ * Coroutine mechanics for the sillier bits of the code. If these
+ * macros look impenetrable to you, you might find it helpful to
+ * read
+ *
+ * http://www.chiark.greenend.org.uk/~sgtatham/coroutines.html
+ *
+ * which explains the theory behind these macros.
+ *
+ * In particular, if you are getting `case expression not constant'
+ * errors when building with MS Visual Studio, this is because MS's
+ * Edit and Continue debugging feature causes their compiler to
+ * violate ANSI C. To disable Edit and Continue debugging:
+ *
+ * - right-click ssh.c in the FileView
+ * - click Settings
+ * - select the C/C++ tab and the General category
+ * - under `Debug info:', select anything _other_ than `Program
+ * Database for Edit and Continue'.
+ */
+#define crBegin(v) { int *crLine = &v; switch(v) { case 0:;
+#define crBeginState crBegin(s->crLine)
+#define crStateP(t, v) \
+ struct t *s; \
+ if (!(v)) { s = (v) = snew(struct t); s->crLine = 0; } \
+ s = (v);
+#define crState(t) crStateP(t, ssh->t)
+#define crFinish(z) } *crLine = 0; return (z); }
+#define crFinishV } *crLine = 0; return; }
+#define crFinishFree(z) } sfree(s); return (z); }
+#define crFinishFreeV } sfree(s); return; }
#define crReturn(z) \
do {\
- crLine=__LINE__; return (z); case __LINE__:;\
+ *crLine =__LINE__; return (z); case __LINE__:;\
} while (0)
#define crReturnV \
do {\
- crLine=__LINE__; return; case __LINE__:;\
+ *crLine=__LINE__; return; case __LINE__:;\
} while (0)
-#define crStop(z) do{ crLine = 0; return (z); }while(0)
-#define crStopV do{ crLine = 0; return; }while(0)
+#define crStop(z) do{ *crLine = 0; return (z); }while(0)
+#define crStopV do{ *crLine = 0; return; }while(0)
#define crWaitUntil(c) do { crReturn(0); } while (!(c))
#define crWaitUntilV(c) do { crReturnV; } while (!(c))
-extern char *x11_init(Socket *, char *, void *);
-extern void x11_close(Socket);
-extern int x11_send(Socket, char *, int);
-extern void x11_invent_auth(char *, int, char *, int);
-extern void x11_unthrottle(Socket s);
-extern void x11_override_throttle(Socket s, int enable);
-
-extern char *pfd_newconnect(Socket * s, char *hostname, int port, void *c);
-extern char *pfd_addforward(char *desthost, int destport, int port);
-extern void pfd_close(Socket s);
-extern int pfd_send(Socket s, char *data, int len);
-extern void pfd_confirm(Socket s);
-extern void pfd_unthrottle(Socket s);
-extern void pfd_override_throttle(Socket s, int enable);
-
-static void ssh2_pkt_init(int pkt_type);
-static void ssh2_pkt_addbool(unsigned char value);
-static void ssh2_pkt_adduint32(unsigned long value);
-static void ssh2_pkt_addstring_start(void);
-static void ssh2_pkt_addstring_str(char *data);
-static void ssh2_pkt_addstring_data(char *data, int len);
-static void ssh2_pkt_addstring(char *data);
-static char *ssh2_mpint_fmt(Bignum b, int *len);
-static void ssh2_pkt_addmp(Bignum b);
-static int ssh2_pkt_construct(void);
-static void ssh2_pkt_send(void);
+typedef struct ssh_tag *Ssh;
+struct Packet;
+
+static struct Packet *ssh1_pkt_init(int pkt_type);
+static struct Packet *ssh2_pkt_init(int pkt_type);
+static void ssh_pkt_ensure(struct Packet *, int length);
+static void ssh_pkt_adddata(struct Packet *, const void *data, int len);
+static void ssh_pkt_addbyte(struct Packet *, unsigned char value);
+static void ssh2_pkt_addbool(struct Packet *, unsigned char value);
+static void ssh_pkt_adduint32(struct Packet *, unsigned long value);
+static void ssh_pkt_addstring_start(struct Packet *);
+static void ssh_pkt_addstring_str(struct Packet *, const char *data);
+static void ssh_pkt_addstring_data(struct Packet *, const char *data, int len);
+static void ssh_pkt_addstring(struct Packet *, const char *data);
+static unsigned char *ssh2_mpint_fmt(Bignum b, int *len);
+static void ssh1_pkt_addmp(struct Packet *, Bignum b);
+static void ssh2_pkt_addmp(struct Packet *, Bignum b);
+static int ssh2_pkt_construct(Ssh, struct Packet *);
+static void ssh2_pkt_send(Ssh, struct Packet *);
+static void ssh2_pkt_send_noqueue(Ssh, struct Packet *);
+static int do_ssh1_login(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin);
+static void do_ssh2_authconn(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin);
+static void ssh2_channel_check_close(struct ssh_channel *c);
+static void ssh_channel_destroy(struct ssh_channel *c);
/*
* Buffer management constants. There are several of these for
*
* - SSH1_BUFFER_LIMIT is the amount of backlog that must build up
* on a local data stream before we throttle the whole SSH
- * connection (in SSH1 only). Throttling the whole connection is
+ * connection (in SSH-1 only). Throttling the whole connection is
* pretty drastic so we set this high in the hope it won't
* happen very often.
*
* - SSH_MAX_BACKLOG is the amount of backlog that must build up
* on the SSH connection itself before we defensively throttle
* _all_ local data streams. This is pretty drastic too (though
- * thankfully unlikely in SSH2 since the window mechanism should
+ * thankfully unlikely in SSH-2 since the window mechanism should
* ensure that the server never has any need to throttle its end
* of the connection), so we set this high as well.
*
- * - OUR_V2_WINSIZE is the maximum window size we present on SSH2
+ * - OUR_V2_WINSIZE is the maximum window size we present on SSH-2
* channels.
+ *
+ * - OUR_V2_BIGWIN is the window size we advertise for the only
+ * channel in a simple connection. It must be <= INT_MAX.
+ *
+ * - OUR_V2_MAXPKT is the official "maximum packet size" we send
+ * to the remote side. This actually has nothing to do with the
+ * size of the _packet_, but is instead a limit on the amount
+ * of data we're willing to receive in a single SSH2 channel
+ * data message.
+ *
+ * - OUR_V2_PACKETLIMIT is actually the maximum size of SSH
+ * _packet_ we're prepared to cope with. It must be a multiple
+ * of the cipher block size, and must be at least 35000.
*/
#define SSH1_BUFFER_LIMIT 32768
#define SSH_MAX_BACKLOG 32768
#define OUR_V2_WINSIZE 16384
-
-const static struct ssh_kex *kex_algs[] = {
- &ssh_diffiehellman_gex,
- &ssh_diffiehellman
-};
+#define OUR_V2_BIGWIN 0x7fffffff
+#define OUR_V2_MAXPKT 0x4000UL
+#define OUR_V2_PACKETLIMIT 0x9000UL
const static struct ssh_signkey *hostkey_algs[] = { &ssh_rsa, &ssh_dss };
-static void nullmac_key(unsigned char *key)
-{
-}
-static void nullmac_generate(unsigned char *blk, int len,
- unsigned long seq)
-{
-}
-static int nullmac_verify(unsigned char *blk, int len, unsigned long seq)
-{
- return 1;
-}
-const static struct ssh_mac ssh_mac_none = {
- nullmac_key, nullmac_key, nullmac_generate, nullmac_verify, "none", 0
-};
const static struct ssh_mac *macs[] = {
- &ssh_sha1, &ssh_md5, &ssh_mac_none
+ &ssh_hmac_sha256, &ssh_hmac_sha1, &ssh_hmac_sha1_96, &ssh_hmac_md5
};
const static struct ssh_mac *buggymacs[] = {
- &ssh_sha1_buggy, &ssh_md5, &ssh_mac_none
+ &ssh_hmac_sha1_buggy, &ssh_hmac_sha1_96_buggy, &ssh_hmac_md5
};
-static void ssh_comp_none_init(void)
+static void *ssh_comp_none_init(void)
+{
+ return NULL;
+}
+static void ssh_comp_none_cleanup(void *handle)
{
}
-static int ssh_comp_none_block(unsigned char *block, int len,
+static int ssh_comp_none_block(void *handle, unsigned char *block, int len,
unsigned char **outblock, int *outlen)
{
return 0;
}
-static int ssh_comp_none_disable(void)
+static int ssh_comp_none_disable(void *handle)
{
return 0;
}
const static struct ssh_compress ssh_comp_none = {
- "none",
- ssh_comp_none_init, ssh_comp_none_block,
- ssh_comp_none_init, ssh_comp_none_block,
- ssh_comp_none_disable
+ "none", NULL,
+ ssh_comp_none_init, ssh_comp_none_cleanup, ssh_comp_none_block,
+ ssh_comp_none_init, ssh_comp_none_cleanup, ssh_comp_none_block,
+ ssh_comp_none_disable, NULL
};
extern const struct ssh_compress ssh_zlib;
const static struct ssh_compress *compressions[] = {
CHAN_X11,
CHAN_AGENT,
CHAN_SOCKDATA,
- CHAN_SOCKDATA_DORMANT /* one the remote hasn't confirmed */
+ CHAN_SOCKDATA_DORMANT, /* one the remote hasn't confirmed */
+ /*
+ * CHAN_ZOMBIE is used to indicate a channel for which we've
+ * already destroyed the local data source: for instance, if a
+ * forwarded port experiences a socket error on the local side, we
+ * immediately destroy its local socket and turn the SSH channel
+ * into CHAN_ZOMBIE.
+ */
+ CHAN_ZOMBIE
+};
+
+typedef void (*handler_fn_t)(Ssh ssh, struct Packet *pktin);
+typedef void (*chandler_fn_t)(Ssh ssh, struct Packet *pktin, void *ctx);
+typedef void (*cchandler_fn_t)(struct ssh_channel *, struct Packet *, void *);
+
+/*
+ * Each channel has a queue of outstanding CHANNEL_REQUESTS and their
+ * handlers.
+ */
+struct outstanding_channel_request {
+ cchandler_fn_t handler;
+ void *ctx;
+ struct outstanding_channel_request *next;
};
/*
* 2-3-4 tree storing channels.
*/
struct ssh_channel {
+ Ssh ssh; /* pointer back to main context */
unsigned remoteid, localid;
int type;
+ /* True if we opened this channel but server hasn't confirmed. */
+ int halfopen;
/*
- * In SSH1, this value contains four bits:
+ * In SSH-1, this value contains four bits:
*
* 1 We have sent SSH1_MSG_CHANNEL_CLOSE.
* 2 We have sent SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION.
* 8 We have received SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION.
*
* A channel is completely finished with when all four bits are set.
+ *
+ * In SSH-2, the four bits mean:
+ *
+ * 1 We have sent SSH2_MSG_CHANNEL_EOF.
+ * 2 We have sent SSH2_MSG_CHANNEL_CLOSE.
+ * 4 We have received SSH2_MSG_CHANNEL_EOF.
+ * 8 We have received SSH2_MSG_CHANNEL_CLOSE.
+ *
+ * A channel is completely finished with when we have both sent
+ * and received CLOSE.
+ *
+ * The symbolic constants below use the SSH-2 terminology, which
+ * is a bit confusing in SSH-1, but we have to use _something_.
*/
+#define CLOSES_SENT_EOF 1
+#define CLOSES_SENT_CLOSE 2
+#define CLOSES_RCVD_EOF 4
+#define CLOSES_RCVD_CLOSE 8
int closes;
+
+ /*
+ * This flag indicates that an EOF is pending on the outgoing side
+ * of the channel: that is, wherever we're getting the data for
+ * this channel has sent us some data followed by EOF. We can't
+ * actually send the EOF until we've finished sending the data, so
+ * we set this flag instead to remind us to do so once our buffer
+ * is clear.
+ */
+ int pending_eof;
+
+ /*
+ * True if this channel is causing the underlying connection to be
+ * throttled.
+ */
+ int throttling_conn;
union {
- struct ssh1_data_channel {
- int throttling;
- } v1;
struct ssh2_data_channel {
bufchain outbuffer;
unsigned remwindow, remmaxpkt;
- unsigned locwindow;
+ /* locwindow is signed so we can cope with excess data. */
+ int locwindow, locmaxwin;
+ /*
+ * remlocwin is the amount of local window that we think
+ * the remote end had available to it after it sent the
+ * last data packet or window adjust ack.
+ */
+ int remlocwin;
+ /*
+ * These store the list of channel requests that haven't
+ * been acked.
+ */
+ struct outstanding_channel_request *chanreq_head, *chanreq_tail;
+ enum { THROTTLED, UNTHROTTLING, UNTHROTTLED } throttle_state;
} v2;
} v;
union {
struct ssh_agent_channel {
unsigned char *message;
unsigned char msglen[4];
- int lensofar, totallen;
+ unsigned lensofar, totallen;
+ int outstanding_requests;
} a;
struct ssh_x11_channel {
Socket s;
};
/*
- * 2-3-4 tree storing remote->local port forwardings. SSH 1 and SSH
- * 2 use this structure in different ways, reflecting SSH 2's
+ * 2-3-4 tree storing remote->local port forwardings. SSH-1 and SSH-2
+ * use this structure in different ways, reflecting SSH-2's
* altogether saner approach to port forwarding.
*
- * In SSH 1, you arrange a remote forwarding by sending the server
+ * In SSH-1, you arrange a remote forwarding by sending the server
* the remote port number, and the local destination host:port.
* When a connection comes in, the server sends you back that
* host:port pair, and you connect to it. This is a ready-made
* host:port pairs we _are_ trying to forward to, and reject a
* connection request from the server if it's not in the list.
*
- * In SSH 2, each side of the connection minds its own business and
+ * In SSH-2, each side of the connection minds its own business and
* doesn't send unnecessary information to the other. You arrange a
* remote forwarding by sending the server just the remote port
* number. When a connection comes in, the server tells you which
* of its ports was connected to; and _you_ have to remember what
* local host:port pair went with that port number.
*
- * Hence: in SSH 1 this structure stores host:port pairs we intend
- * to allow connections to, and is indexed by those host:port
- * pairs. In SSH 2 it stores a mapping from source port to
- * destination host:port pair, and is indexed by source port.
+ * Hence, in SSH-1 this structure is indexed by destination
+ * host:port pair, whereas in SSH-2 it is indexed by source port.
*/
+struct ssh_portfwd; /* forward declaration */
+
struct ssh_rportfwd {
unsigned sport, dport;
char dhost[256];
+ char *sportdesc;
+ struct ssh_portfwd *pfrec;
};
+#define free_rportfwd(pf) ( \
+ ((pf) ? (sfree((pf)->sportdesc)) : (void)0 ), sfree(pf) )
-struct Packet {
- long length;
+/*
+ * Separately to the rportfwd tree (which is for looking up port
+ * open requests from the server), a tree of _these_ structures is
+ * used to keep track of all the currently open port forwardings,
+ * so that we can reconfigure in mid-session if the user requests
+ * it.
+ */
+struct ssh_portfwd {
+ enum { DESTROY, KEEP, CREATE } status;
int type;
- unsigned char *data;
- unsigned char *body;
- long savedpos;
- long maxlen;
+ unsigned sport, dport;
+ char *saddr, *daddr;
+ char *sserv, *dserv;
+ struct ssh_rportfwd *remote;
+ int addressfamily;
+ void *local;
};
+#define free_portfwd(pf) ( \
+ ((pf) ? (sfree((pf)->saddr), sfree((pf)->daddr), \
+ sfree((pf)->sserv), sfree((pf)->dserv)) : (void)0 ), sfree(pf) )
-static SHA_State exhash, exhashbase;
-
-static Socket s = NULL;
-
-static unsigned char session_key[32];
-static int ssh1_compressing;
-static int ssh1_remote_protoflags;
-static int ssh1_local_protoflags;
-static int ssh_agentfwd_enabled;
-static int ssh_X11_fwd_enabled;
-static int ssh_remote_bugs;
-static const struct ssh_cipher *cipher = NULL;
-static const struct ssh2_cipher *cscipher = NULL;
-static const struct ssh2_cipher *sccipher = NULL;
-static const struct ssh_mac *csmac = NULL;
-static const struct ssh_mac *scmac = NULL;
-static const struct ssh_compress *cscomp = NULL;
-static const struct ssh_compress *sccomp = NULL;
-static const struct ssh_kex *kex = NULL;
-static const struct ssh_signkey *hostkey = NULL;
-static unsigned char ssh2_session_id[20];
-
-static char *savedhost;
-static int savedport;
-static int ssh_send_ok;
-static int ssh_echoing, ssh_editing;
-
-static tree234 *ssh_channels; /* indexed by local id */
-static struct ssh_channel *mainchan; /* primary session channel */
-static int ssh_exitcode = -1;
-
-static tree234 *ssh_rportfwds;
-
-static enum {
- SSH_STATE_PREPACKET,
- SSH_STATE_BEFORE_SIZE,
- SSH_STATE_INTERMED,
- SSH_STATE_SESSION,
- SSH_STATE_CLOSED
-} ssh_state = SSH_STATE_PREPACKET;
-
-static int size_needed = FALSE, eof_needed = FALSE;
-
-static struct Packet pktin = { 0, 0, NULL, NULL, 0 };
-static struct Packet pktout = { 0, 0, NULL, NULL, 0 };
-static unsigned char *deferred_send_data = NULL;
-static int deferred_len = 0, deferred_size = 0;
+struct Packet {
+ long length; /* length of `data' actually used */
+ long forcepad; /* SSH-2: force padding to at least this length */
+ int type; /* only used for incoming packets */
+ unsigned long sequence; /* SSH-2 incoming sequence number */
+ unsigned char *data; /* allocated storage */
+ unsigned char *body; /* offset of payload within `data' */
+ long savedpos; /* temporary index into `data' (for strings) */
+ long maxlen; /* amount of storage allocated for `data' */
+ long encrypted_len; /* for SSH-2 total-size counting */
-/*
- * Gross hack: pscp will try to start SFTP but fall back to scp1 if
- * that fails. This variable is the means by which scp.c can reach
- * into the SSH code and find out which one it got.
- */
-int ssh_fallback_cmd = 0;
-
-static int ssh_version;
-static int ssh1_throttle_count;
-static int ssh_overall_bufsize;
-static int ssh_throttled_all;
-static int ssh1_stdout_throttling;
-static void (*ssh_protocol) (unsigned char *in, int inlen, int ispkt);
-static void ssh1_protocol(unsigned char *in, int inlen, int ispkt);
-static void ssh2_protocol(unsigned char *in, int inlen, int ispkt);
-static void ssh_size(void);
-static void ssh_special(Telnet_Special);
-static int ssh2_try_send(struct ssh_channel *c);
-static void ssh2_add_channel_data(struct ssh_channel *c, char *buf,
- int len);
-static void ssh_throttle_all(int enable, int bufsize);
-static void ssh2_set_window(struct ssh_channel *c, unsigned newwin);
-static int (*s_rdpkt) (unsigned char **data, int *datalen);
-static int ssh_sendbuffer(void);
+ /*
+ * State associated with packet logging
+ */
+ int logmode;
+ int nblanks;
+ struct logblank_t *blanks;
+};
-static struct rdpkt1_state_tag {
+static void ssh1_protocol(Ssh ssh, void *vin, int inlen,
+ struct Packet *pktin);
+static void ssh2_protocol(Ssh ssh, void *vin, int inlen,
+ struct Packet *pktin);
+static void ssh1_protocol_setup(Ssh ssh);
+static void ssh2_protocol_setup(Ssh ssh);
+static void ssh_size(void *handle, int width, int height);
+static void ssh_special(void *handle, Telnet_Special);
+static int ssh2_try_send(struct ssh_channel *c);
+static void ssh2_add_channel_data(struct ssh_channel *c, char *buf, int len);
+static void ssh_throttle_all(Ssh ssh, int enable, int bufsize);
+static void ssh2_set_window(struct ssh_channel *c, int newwin);
+static int ssh_sendbuffer(void *handle);
+static int ssh_do_close(Ssh ssh, int notify_exit);
+static unsigned long ssh_pkt_getuint32(struct Packet *pkt);
+static int ssh2_pkt_getbool(struct Packet *pkt);
+static void ssh_pkt_getstring(struct Packet *pkt, char **p, int *length);
+static void ssh2_timer(void *ctx, unsigned long now);
+static void do_ssh2_transport(Ssh ssh, void *vin, int inlen,
+ struct Packet *pktin);
+static void ssh2_msg_unexpected(Ssh ssh, struct Packet *pktin);
+
+struct rdpkt1_state_tag {
long len, pad, biglen, to_read;
unsigned long realcrc, gotcrc;
unsigned char *p;
int i;
int chunk;
-} rdpkt1_state;
+ struct Packet *pktin;
+};
-static struct rdpkt2_state_tag {
+struct rdpkt2_state_tag {
long len, pad, payload, packetlen, maclen;
int i;
int cipherblk;
unsigned long incoming_sequence;
-} rdpkt2_state;
+ struct Packet *pktin;
+};
+
+struct queued_handler;
+struct queued_handler {
+ int msg1, msg2;
+ chandler_fn_t handler;
+ void *ctx;
+ struct queued_handler *next;
+};
+
+struct ssh_tag {
+ const struct plug_function_table *fn;
+ /* the above field _must_ be first in the structure */
+
+ char *v_c, *v_s;
+ void *exhash;
+
+ Socket s;
+
+ void *ldisc;
+ void *logctx;
+
+ unsigned char session_key[32];
+ int v1_compressing;
+ int v1_remote_protoflags;
+ int v1_local_protoflags;
+ int agentfwd_enabled;
+ int X11_fwd_enabled;
+ int remote_bugs;
+ const struct ssh_cipher *cipher;
+ void *v1_cipher_ctx;
+ void *crcda_ctx;
+ const struct ssh2_cipher *cscipher, *sccipher;
+ void *cs_cipher_ctx, *sc_cipher_ctx;
+ const struct ssh_mac *csmac, *scmac;
+ void *cs_mac_ctx, *sc_mac_ctx;
+ const struct ssh_compress *cscomp, *sccomp;
+ void *cs_comp_ctx, *sc_comp_ctx;
+ const struct ssh_kex *kex;
+ const struct ssh_signkey *hostkey;
+ unsigned char v2_session_id[SSH2_KEX_MAX_HASH_LEN];
+ int v2_session_id_len;
+ void *kex_ctx;
+
+ char *savedhost;
+ int savedport;
+ int send_ok;
+ int echoing, editing;
+
+ void *frontend;
+
+ int ospeed, ispeed; /* temporaries */
+ int term_width, term_height;
+
+ tree234 *channels; /* indexed by local id */
+ struct ssh_channel *mainchan; /* primary session channel */
+ int ncmode; /* is primary channel direct-tcpip? */
+ int exitcode;
+ int close_expected;
+ int clean_exit;
+
+ tree234 *rportfwds, *portfwds;
+
+ enum {
+ SSH_STATE_PREPACKET,
+ SSH_STATE_BEFORE_SIZE,
+ SSH_STATE_INTERMED,
+ SSH_STATE_SESSION,
+ SSH_STATE_CLOSED
+ } state;
+
+ int size_needed, eof_needed;
+ int sent_console_eof;
+ int got_pty; /* affects EOF behaviour on main channel */
+
+ struct Packet **queue;
+ int queuelen, queuesize;
+ int queueing;
+ unsigned char *deferred_send_data;
+ int deferred_len, deferred_size;
+
+ /*
+ * Gross hack: pscp will try to start SFTP but fall back to
+ * scp1 if that fails. This variable is the means by which
+ * scp.c can reach into the SSH code and find out which one it
+ * got.
+ */
+ int fallback_cmd;
+
+ bufchain banner; /* accumulates banners during do_ssh2_authconn */
+
+ Pkt_KCtx pkt_kctx;
+ Pkt_ACtx pkt_actx;
+
+ struct X11Display *x11disp;
+
+ int version;
+ int conn_throttle_count;
+ int overall_bufsize;
+ int throttled_all;
+ int v1_stdout_throttling;
+ unsigned long v2_outgoing_sequence;
+
+ int ssh1_rdpkt_crstate;
+ int ssh2_rdpkt_crstate;
+ int ssh_gotdata_crstate;
+ int do_ssh1_connection_crstate;
+
+ void *do_ssh_init_state;
+ void *do_ssh1_login_state;
+ void *do_ssh2_transport_state;
+ void *do_ssh2_authconn_state;
+
+ struct rdpkt1_state_tag rdpkt1_state;
+ struct rdpkt2_state_tag rdpkt2_state;
+
+ /* SSH-1 and SSH-2 use this for different things, but both use it */
+ int protocol_initial_phase_done;
+
+ void (*protocol) (Ssh ssh, void *vin, int inlen,
+ struct Packet *pkt);
+ struct Packet *(*s_rdpkt) (Ssh ssh, unsigned char **data, int *datalen);
+
+ /*
+ * We maintain our own copy of a Conf structure here. That way,
+ * when we're passed a new one for reconfiguration, we can check
+ * the differences and potentially reconfigure port forwardings
+ * etc in mid-session.
+ */
+ Conf *conf;
+
+ /*
+ * Values cached out of conf so as to avoid the tree234 lookup
+ * cost every time they're used.
+ */
+ int logomitdata;
+
+ /*
+ * Dynamically allocated username string created during SSH
+ * login. Stored in here rather than in the coroutine state so
+ * that it'll be reliably freed if we shut down the SSH session
+ * at some unexpected moment.
+ */
+ char *username;
+
+ /*
+ * Used to transfer data back from async callbacks.
+ */
+ void *agent_response;
+ int agent_response_len;
+ int user_response;
+
+ /*
+ * The SSH connection can be set as `frozen', meaning we are
+ * not currently accepting incoming data from the network. This
+ * is slightly more serious than setting the _socket_ as
+ * frozen, because we may already have had data passed to us
+ * from the network which we need to delay processing until
+ * after the freeze is lifted, so we also need a bufchain to
+ * store that data.
+ */
+ int frozen;
+ bufchain queued_incoming_data;
+
+ /*
+ * Dispatch table for packet types that we may have to deal
+ * with at any time.
+ */
+ handler_fn_t packet_dispatch[256];
+
+ /*
+ * Queues of one-off handler functions for success/failure
+ * indications from a request.
+ */
+ struct queued_handler *qhead, *qtail;
+ handler_fn_t q_saved_handler1, q_saved_handler2;
+
+ /*
+ * This module deals with sending keepalives.
+ */
+ Pinger pinger;
+
+ /*
+ * Track incoming and outgoing data sizes and time, for
+ * size-based rekeys.
+ */
+ unsigned long incoming_data_size, outgoing_data_size, deferred_data_size;
+ unsigned long max_data_size;
+ int kex_in_progress;
+ unsigned long next_rekey, last_rekey;
+ char *deferred_rekey_reason; /* points to STATIC string; don't free */
+
+ /*
+ * Fully qualified host name, which we need if doing GSSAPI.
+ */
+ char *fullhostname;
+
+#ifndef NO_GSSAPI
+ /*
+ * GSSAPI libraries for this session.
+ */
+ struct ssh_gss_liblist *gsslibs;
+#endif
+};
+
+#define logevent(s) logevent(ssh->frontend, s)
+
+/* logevent, only printf-formatted. */
+static void logeventf(Ssh ssh, const char *fmt, ...)
+{
+ va_list ap;
+ char *buf;
+
+ va_start(ap, fmt);
+ buf = dupvprintf(fmt, ap);
+ va_end(ap);
+ logevent(buf);
+ sfree(buf);
+}
+
+static void bomb_out(Ssh ssh, char *text)
+{
+ ssh_do_close(ssh, FALSE);
+ logevent(text);
+ connection_fatal(ssh->frontend, "%s", text);
+ sfree(text);
+}
+
+#define bombout(msg) bomb_out(ssh, dupprintf msg)
+
+/* Functions to leave bits out of the SSH packet log file. */
+
+static void dont_log_password(Ssh ssh, struct Packet *pkt, int blanktype)
+{
+ if (conf_get_int(ssh->conf, CONF_logomitpass))
+ pkt->logmode = blanktype;
+}
+
+static void dont_log_data(Ssh ssh, struct Packet *pkt, int blanktype)
+{
+ if (ssh->logomitdata)
+ pkt->logmode = blanktype;
+}
+
+static void end_log_omission(Ssh ssh, struct Packet *pkt)
+{
+ pkt->logmode = PKTLOG_EMIT;
+}
+
+/* Helper function for common bits of parsing ttymodes. */
+static void parse_ttymodes(Ssh ssh,
+ void (*do_mode)(void *data, char *mode, char *val),
+ void *data)
+{
+ char *key, *val;
+
+ for (val = conf_get_str_strs(ssh->conf, CONF_ttymodes, NULL, &key);
+ val != NULL;
+ val = conf_get_str_strs(ssh->conf, CONF_ttymodes, key, &key)) {
+ /*
+ * val[0] is either 'V', indicating that an explicit value
+ * follows it, or 'A' indicating that we should pass the
+ * value through from the local environment via get_ttymode.
+ */
+ if (val[0] == 'A') {
+ val = get_ttymode(ssh->frontend, key);
+ if (val) {
+ do_mode(data, key, val);
+ sfree(val);
+ }
+ } else
+ do_mode(data, key, val + 1); /* skip the 'V' */
+ }
+}
static int ssh_channelcmp(void *av, void *bv)
{
return 0;
}
-static int alloc_channel_id(void)
+/*
+ * Special form of strcmp which can cope with NULL inputs. NULL is
+ * defined to sort before even the empty string.
+ */
+static int nullstrcmp(const char *a, const char *b)
+{
+ if (a == NULL && b == NULL)
+ return 0;
+ if (a == NULL)
+ return -1;
+ if (b == NULL)
+ return +1;
+ return strcmp(a, b);
+}
+
+static int ssh_portcmp(void *av, void *bv)
+{
+ struct ssh_portfwd *a = (struct ssh_portfwd *) av;
+ struct ssh_portfwd *b = (struct ssh_portfwd *) bv;
+ int i;
+ if (a->type > b->type)
+ return +1;
+ if (a->type < b->type)
+ return -1;
+ if (a->addressfamily > b->addressfamily)
+ return +1;
+ if (a->addressfamily < b->addressfamily)
+ return -1;
+ if ( (i = nullstrcmp(a->saddr, b->saddr)) != 0)
+ return i < 0 ? -1 : +1;
+ if (a->sport > b->sport)
+ return +1;
+ if (a->sport < b->sport)
+ return -1;
+ if (a->type != 'D') {
+ if ( (i = nullstrcmp(a->daddr, b->daddr)) != 0)
+ return i < 0 ? -1 : +1;
+ if (a->dport > b->dport)
+ return +1;
+ if (a->dport < b->dport)
+ return -1;
+ }
+ return 0;
+}
+
+static int alloc_channel_id(Ssh ssh)
{
const unsigned CHANNEL_NUMBER_OFFSET = 256;
unsigned low, high, mid;
* everything in that sequence must have ID equal to its tree
* index plus CHANNEL_NUMBER_OFFSET.)
*/
- tsize = count234(ssh_channels);
+ tsize = count234(ssh->channels);
low = -1;
high = tsize;
while (high - low > 1) {
mid = (high + low) / 2;
- c = index234(ssh_channels, mid);
+ c = index234(ssh->channels, mid);
if (c->localid == mid + CHANNEL_NUMBER_OFFSET)
low = mid; /* this one is fine */
else
*/
{
unsigned i = low + 1 + CHANNEL_NUMBER_OFFSET;
- assert(NULL == find234(ssh_channels, &i, ssh_channelfind));
+ assert(NULL == find234(ssh->channels, &i, ssh_channelfind));
}
return low + 1 + CHANNEL_NUMBER_OFFSET;
}
-static void c_write(char *buf, int len)
+static void c_write_stderr(int trusted, const char *buf, int len)
{
- if ((flags & FLAG_STDERR)) {
- int i;
- for (i = 0; i < len; i++)
- if (buf[i] != '\r')
- fputc(buf[i], stderr);
- return;
- }
- from_backend(1, buf, len);
+ int i;
+ for (i = 0; i < len; i++)
+ if (buf[i] != '\r' && (trusted || buf[i] == '\n' || (buf[i] & 0x60)))
+ fputc(buf[i], stderr);
}
-static void c_write_untrusted(char *buf, int len)
+static void c_write(Ssh ssh, const char *buf, int len)
{
- int i;
- for (i = 0; i < len; i++) {
- if (buf[i] == '\n')
- c_write("\r\n", 2);
- else if ((buf[i] & 0x60) || (buf[i] == '\r'))
- c_write(buf + i, 1);
- }
+ if (flags & FLAG_STDERR)
+ c_write_stderr(1, buf, len);
+ else
+ from_backend(ssh->frontend, 1, buf, len);
+}
+
+static void c_write_untrusted(Ssh ssh, const char *buf, int len)
+{
+ if (flags & FLAG_STDERR)
+ c_write_stderr(0, buf, len);
+ else
+ from_backend_untrusted(ssh->frontend, buf, len);
+}
+
+static void c_write_str(Ssh ssh, const char *buf)
+{
+ c_write(ssh, buf, strlen(buf));
}
-static void c_write_str(char *buf)
+static void ssh_free_packet(struct Packet *pkt)
+{
+ sfree(pkt->data);
+ sfree(pkt);
+}
+static struct Packet *ssh_new_packet(void)
{
- c_write(buf, strlen(buf));
+ struct Packet *pkt = snew(struct Packet);
+
+ pkt->body = pkt->data = NULL;
+ pkt->maxlen = 0;
+ pkt->logmode = PKTLOG_EMIT;
+ pkt->nblanks = 0;
+ pkt->blanks = NULL;
+
+ return pkt;
}
/*
* Decipher and verify the packet when it is completely read.
* Drop SSH1_MSG_DEBUG and SSH1_MSG_IGNORE packets.
* Update the *data and *datalen variables.
- * Return the additional nr of bytes needed, or 0 when
- * a complete packet is available.
+ * Return a Packet structure when a packet is completed.
*/
-static int ssh1_rdpkt(unsigned char **data, int *datalen)
+static struct Packet *ssh1_rdpkt(Ssh ssh, unsigned char **data, int *datalen)
{
- struct rdpkt1_state_tag *st = &rdpkt1_state;
+ struct rdpkt1_state_tag *st = &ssh->rdpkt1_state;
- crBegin;
+ crBegin(ssh->ssh1_rdpkt_crstate);
- next_packet:
+ st->pktin = ssh_new_packet();
- pktin.type = 0;
- pktin.length = 0;
+ st->pktin->type = 0;
+ st->pktin->length = 0;
for (st->i = st->len = 0; st->i < 4; st->i++) {
while ((*datalen) == 0)
- crReturn(4 - st->i);
+ crReturn(NULL);
st->len = (st->len << 8) + **data;
(*data)++, (*datalen)--;
}
st->pad = 8 - (st->len % 8);
st->biglen = st->len + st->pad;
- pktin.length = st->len - 5;
+ st->pktin->length = st->len - 5;
- if (pktin.maxlen < st->biglen) {
- pktin.maxlen = st->biglen;
- pktin.data = (pktin.data == NULL ? smalloc(st->biglen + APIEXTRA) :
- srealloc(pktin.data, st->biglen + APIEXTRA));
- if (!pktin.data)
- fatalbox("Out of memory");
+ if (st->biglen < 0) {
+ bombout(("Extremely large packet length from server suggests"
+ " data stream corruption"));
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
}
+ st->pktin->maxlen = st->biglen;
+ st->pktin->data = snewn(st->biglen + APIEXTRA, unsigned char);
+
st->to_read = st->biglen;
- st->p = pktin.data;
+ st->p = st->pktin->data;
while (st->to_read > 0) {
st->chunk = st->to_read;
while ((*datalen) == 0)
- crReturn(st->to_read);
+ crReturn(NULL);
if (st->chunk > (*datalen))
st->chunk = (*datalen);
memcpy(st->p, *data, st->chunk);
st->to_read -= st->chunk;
}
- if (cipher && detect_attack(pktin.data, st->biglen, NULL)) {
+ if (ssh->cipher && detect_attack(ssh->crcda_ctx, st->pktin->data,
+ st->biglen, NULL)) {
bombout(("Network attack (CRC compensation) detected!"));
- crReturn(0);
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
}
- if (cipher)
- cipher->decrypt(pktin.data, st->biglen);
+ if (ssh->cipher)
+ ssh->cipher->decrypt(ssh->v1_cipher_ctx, st->pktin->data, st->biglen);
- st->realcrc = crc32(pktin.data, st->biglen - 4);
- st->gotcrc = GET_32BIT(pktin.data + st->biglen - 4);
+ st->realcrc = crc32_compute(st->pktin->data, st->biglen - 4);
+ st->gotcrc = GET_32BIT(st->pktin->data + st->biglen - 4);
if (st->gotcrc != st->realcrc) {
bombout(("Incorrect CRC received on packet"));
- crReturn(0);
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
}
- pktin.body = pktin.data + st->pad + 1;
+ st->pktin->body = st->pktin->data + st->pad + 1;
+ st->pktin->savedpos = 0;
- if (ssh1_compressing) {
+ if (ssh->v1_compressing) {
unsigned char *decompblk;
int decomplen;
- zlib_decompress_block(pktin.body - 1, pktin.length + 1,
- &decompblk, &decomplen);
-
- if (pktin.maxlen < st->pad + decomplen) {
- pktin.maxlen = st->pad + decomplen;
- pktin.data = srealloc(pktin.data, pktin.maxlen + APIEXTRA);
- pktin.body = pktin.data + st->pad + 1;
- if (!pktin.data)
- fatalbox("Out of memory");
+ if (!zlib_decompress_block(ssh->sc_comp_ctx,
+ st->pktin->body - 1, st->pktin->length + 1,
+ &decompblk, &decomplen)) {
+ bombout(("Zlib decompression encountered invalid data"));
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
+ }
+
+ if (st->pktin->maxlen < st->pad + decomplen) {
+ st->pktin->maxlen = st->pad + decomplen;
+ st->pktin->data = sresize(st->pktin->data,
+ st->pktin->maxlen + APIEXTRA,
+ unsigned char);
+ st->pktin->body = st->pktin->data + st->pad + 1;
}
- memcpy(pktin.body - 1, decompblk, decomplen);
+ memcpy(st->pktin->body - 1, decompblk, decomplen);
sfree(decompblk);
- pktin.length = decomplen - 1;
+ st->pktin->length = decomplen - 1;
}
- pktin.type = pktin.body[-1];
-
- log_packet(PKT_INCOMING, pktin.type, ssh1_pkt_type(pktin.type),
- pktin.body, pktin.length);
+ st->pktin->type = st->pktin->body[-1];
- if (pktin.type == SSH1_SMSG_STDOUT_DATA ||
- pktin.type == SSH1_SMSG_STDERR_DATA ||
- pktin.type == SSH1_MSG_DEBUG ||
- pktin.type == SSH1_SMSG_AUTH_TIS_CHALLENGE ||
- pktin.type == SSH1_SMSG_AUTH_CCARD_CHALLENGE) {
- long stringlen = GET_32BIT(pktin.body);
- if (stringlen + 4 != pktin.length) {
- bombout(("Received data packet with bogus string length"));
- crReturn(0);
+ /*
+ * Log incoming packet, possibly omitting sensitive fields.
+ */
+ if (ssh->logctx) {
+ int nblanks = 0;
+ struct logblank_t blank;
+ if (ssh->logomitdata) {
+ int do_blank = FALSE, blank_prefix = 0;
+ /* "Session data" packets - omit the data field */
+ if ((st->pktin->type == SSH1_SMSG_STDOUT_DATA) ||
+ (st->pktin->type == SSH1_SMSG_STDERR_DATA)) {
+ do_blank = TRUE; blank_prefix = 4;
+ } else if (st->pktin->type == SSH1_MSG_CHANNEL_DATA) {
+ do_blank = TRUE; blank_prefix = 8;
+ }
+ if (do_blank) {
+ blank.offset = blank_prefix;
+ blank.len = st->pktin->length;
+ blank.type = PKTLOG_OMIT;
+ nblanks = 1;
+ }
}
+ log_packet(ssh->logctx,
+ PKT_INCOMING, st->pktin->type,
+ ssh1_pkt_type(st->pktin->type),
+ st->pktin->body, st->pktin->length,
+ nblanks, &blank, NULL);
}
- if (pktin.type == SSH1_MSG_DEBUG) {
- /* log debug message */
- char buf[512];
- int stringlen = GET_32BIT(pktin.body);
- strcpy(buf, "Remote debug message: ");
- if (stringlen > 480)
- stringlen = 480;
- memcpy(buf + 8, pktin.body + 4, stringlen);
- buf[8 + stringlen] = '\0';
- logevent(buf);
- goto next_packet;
- } else if (pktin.type == SSH1_MSG_IGNORE) {
- /* do nothing */
- goto next_packet;
- }
-
- if (pktin.type == SSH1_MSG_DISCONNECT) {
- /* log reason code in disconnect message */
- char buf[256];
- unsigned msglen = GET_32BIT(pktin.body);
- unsigned nowlen;
- strcpy(buf, "Remote sent disconnect: ");
- nowlen = strlen(buf);
- if (msglen > sizeof(buf) - nowlen - 1)
- msglen = sizeof(buf) - nowlen - 1;
- memcpy(buf + nowlen, pktin.body + 4, msglen);
- buf[nowlen + msglen] = '\0';
- /* logevent(buf); (this is now done within the bombout macro) */
- bombout(("Server sent disconnect message:\n\"%s\"", buf+nowlen));
- crReturn(0);
- }
-
- crFinish(0);
+ crFinish(st->pktin);
}
-static int ssh2_rdpkt(unsigned char **data, int *datalen)
+static struct Packet *ssh2_rdpkt(Ssh ssh, unsigned char **data, int *datalen)
{
- struct rdpkt2_state_tag *st = &rdpkt2_state;
+ struct rdpkt2_state_tag *st = &ssh->rdpkt2_state;
+
+ crBegin(ssh->ssh2_rdpkt_crstate);
- crBegin;
+ st->pktin = ssh_new_packet();
- next_packet:
- pktin.type = 0;
- pktin.length = 0;
- if (sccipher)
- st->cipherblk = sccipher->blksize;
+ st->pktin->type = 0;
+ st->pktin->length = 0;
+ if (ssh->sccipher)
+ st->cipherblk = ssh->sccipher->blksize;
else
st->cipherblk = 8;
if (st->cipherblk < 8)
st->cipherblk = 8;
+ st->maclen = ssh->scmac ? ssh->scmac->len : 0;
- if (pktin.maxlen < st->cipherblk) {
- pktin.maxlen = st->cipherblk;
- pktin.data =
- (pktin.data ==
- NULL ? smalloc(st->cipherblk +
- APIEXTRA) : srealloc(pktin.data,
- st->cipherblk +
- APIEXTRA));
- if (!pktin.data)
- fatalbox("Out of memory");
- }
+ if (ssh->sccipher && (ssh->sccipher->flags & SSH_CIPHER_IS_CBC) &&
+ ssh->scmac) {
+ /*
+ * When dealing with a CBC-mode cipher, we want to avoid the
+ * possibility of an attacker's tweaking the ciphertext stream
+ * so as to cause us to feed the same block to the block
+ * cipher more than once and thus leak information
+ * (VU#958563). The way we do this is not to take any
+ * decisions on the basis of anything we've decrypted until
+ * we've verified it with a MAC. That includes the packet
+ * length, so we just read data and check the MAC repeatedly,
+ * and when the MAC passes, see if the length we've got is
+ * plausible.
+ */
- /*
- * Acquire and decrypt the first block of the packet. This will
- * contain the length and padding details.
- */
- for (st->i = st->len = 0; st->i < st->cipherblk; st->i++) {
- while ((*datalen) == 0)
- crReturn(st->cipherblk - st->i);
- pktin.data[st->i] = *(*data)++;
- (*datalen)--;
- }
+ /* May as well allocate the whole lot now. */
+ st->pktin->data = snewn(OUR_V2_PACKETLIMIT + st->maclen + APIEXTRA,
+ unsigned char);
- if (sccipher)
- sccipher->decrypt(pktin.data, st->cipherblk);
+ /* Read an amount corresponding to the MAC. */
+ for (st->i = 0; st->i < st->maclen; st->i++) {
+ while ((*datalen) == 0)
+ crReturn(NULL);
+ st->pktin->data[st->i] = *(*data)++;
+ (*datalen)--;
+ }
- /*
- * Now get the length and padding figures.
- */
- st->len = GET_32BIT(pktin.data);
- st->pad = pktin.data[4];
+ st->packetlen = 0;
+ {
+ unsigned char seq[4];
+ ssh->scmac->start(ssh->sc_mac_ctx);
+ PUT_32BIT(seq, st->incoming_sequence);
+ ssh->scmac->bytes(ssh->sc_mac_ctx, seq, 4);
+ }
- /*
- * _Completely_ silly lengths should be stomped on before they
- * do us any more damage.
- */
- if (st->len < 0 || st->pad < 0 || st->len + st->pad < 0) {
- bombout(("Incoming packet was garbled on decryption"));
- crReturn(0);
- }
+ for (;;) { /* Once around this loop per cipher block. */
+ /* Read another cipher-block's worth, and tack it onto the end. */
+ for (st->i = 0; st->i < st->cipherblk; st->i++) {
+ while ((*datalen) == 0)
+ crReturn(NULL);
+ st->pktin->data[st->packetlen+st->maclen+st->i] = *(*data)++;
+ (*datalen)--;
+ }
+ /* Decrypt one more block (a little further back in the stream). */
+ ssh->sccipher->decrypt(ssh->sc_cipher_ctx,
+ st->pktin->data + st->packetlen,
+ st->cipherblk);
+ /* Feed that block to the MAC. */
+ ssh->scmac->bytes(ssh->sc_mac_ctx,
+ st->pktin->data + st->packetlen, st->cipherblk);
+ st->packetlen += st->cipherblk;
+ /* See if that gives us a valid packet. */
+ if (ssh->scmac->verresult(ssh->sc_mac_ctx,
+ st->pktin->data + st->packetlen) &&
+ ((st->len = toint(GET_32BIT(st->pktin->data))) ==
+ st->packetlen-4))
+ break;
+ if (st->packetlen >= OUR_V2_PACKETLIMIT) {
+ bombout(("No valid incoming packet found"));
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
+ }
+ }
+ st->pktin->maxlen = st->packetlen + st->maclen;
+ st->pktin->data = sresize(st->pktin->data,
+ st->pktin->maxlen + APIEXTRA,
+ unsigned char);
+ } else {
+ st->pktin->data = snewn(st->cipherblk + APIEXTRA, unsigned char);
- /*
- * This enables us to deduce the payload length.
- */
- st->payload = st->len - st->pad - 1;
+ /*
+ * Acquire and decrypt the first block of the packet. This will
+ * contain the length and padding details.
+ */
+ for (st->i = st->len = 0; st->i < st->cipherblk; st->i++) {
+ while ((*datalen) == 0)
+ crReturn(NULL);
+ st->pktin->data[st->i] = *(*data)++;
+ (*datalen)--;
+ }
- pktin.length = st->payload + 5;
+ if (ssh->sccipher)
+ ssh->sccipher->decrypt(ssh->sc_cipher_ctx,
+ st->pktin->data, st->cipherblk);
- /*
- * So now we can work out the total packet length.
- */
- st->packetlen = st->len + 4;
- st->maclen = scmac ? scmac->len : 0;
+ /*
+ * Now get the length figure.
+ */
+ st->len = toint(GET_32BIT(st->pktin->data));
- /*
- * Adjust memory allocation if packet is too big.
- */
- if (pktin.maxlen < st->packetlen + st->maclen) {
- pktin.maxlen = st->packetlen + st->maclen;
- pktin.data =
- (pktin.data ==
- NULL ? smalloc(pktin.maxlen + APIEXTRA) : srealloc(pktin.data,
- pktin.maxlen
- +
- APIEXTRA));
- if (!pktin.data)
- fatalbox("Out of memory");
- }
+ /*
+ * _Completely_ silly lengths should be stomped on before they
+ * do us any more damage.
+ */
+ if (st->len < 0 || st->len > OUR_V2_PACKETLIMIT ||
+ (st->len + 4) % st->cipherblk != 0) {
+ bombout(("Incoming packet was garbled on decryption"));
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
+ }
- /*
- * Read and decrypt the remainder of the packet.
- */
- for (st->i = st->cipherblk; st->i < st->packetlen + st->maclen;
- st->i++) {
- while ((*datalen) == 0)
- crReturn(st->packetlen + st->maclen - st->i);
- pktin.data[st->i] = *(*data)++;
- (*datalen)--;
- }
- /* Decrypt everything _except_ the MAC. */
- if (sccipher)
- sccipher->decrypt(pktin.data + st->cipherblk,
- st->packetlen - st->cipherblk);
+ /*
+ * So now we can work out the total packet length.
+ */
+ st->packetlen = st->len + 4;
+
+ /*
+ * Allocate memory for the rest of the packet.
+ */
+ st->pktin->maxlen = st->packetlen + st->maclen;
+ st->pktin->data = sresize(st->pktin->data,
+ st->pktin->maxlen + APIEXTRA,
+ unsigned char);
+
+ /*
+ * Read and decrypt the remainder of the packet.
+ */
+ for (st->i = st->cipherblk; st->i < st->packetlen + st->maclen;
+ st->i++) {
+ while ((*datalen) == 0)
+ crReturn(NULL);
+ st->pktin->data[st->i] = *(*data)++;
+ (*datalen)--;
+ }
+ /* Decrypt everything _except_ the MAC. */
+ if (ssh->sccipher)
+ ssh->sccipher->decrypt(ssh->sc_cipher_ctx,
+ st->pktin->data + st->cipherblk,
+ st->packetlen - st->cipherblk);
+ /*
+ * Check the MAC.
+ */
+ if (ssh->scmac
+ && !ssh->scmac->verify(ssh->sc_mac_ctx, st->pktin->data,
+ st->len + 4, st->incoming_sequence)) {
+ bombout(("Incorrect MAC received on packet"));
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
+ }
+ }
+ /* Get and sanity-check the amount of random padding. */
+ st->pad = st->pktin->data[4];
+ if (st->pad < 4 || st->len - st->pad < 1) {
+ bombout(("Invalid padding length on received packet"));
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
+ }
/*
- * Check the MAC.
+ * This enables us to deduce the payload length.
*/
- if (scmac
- && !scmac->verify(pktin.data, st->len + 4,
- st->incoming_sequence)) {
- bombout(("Incorrect MAC received on packet"));
- crReturn(0);
- }
- st->incoming_sequence++; /* whether or not we MACed */
+ st->payload = st->len - st->pad - 1;
+
+ st->pktin->length = st->payload + 5;
+ st->pktin->encrypted_len = st->packetlen;
+
+ st->pktin->sequence = st->incoming_sequence++;
/*
* Decompress packet payload.
{
unsigned char *newpayload;
int newlen;
- if (sccomp && sccomp->decompress(pktin.data + 5, pktin.length - 5,
- &newpayload, &newlen)) {
- if (pktin.maxlen < newlen + 5) {
- pktin.maxlen = newlen + 5;
- pktin.data =
- (pktin.data ==
- NULL ? smalloc(pktin.maxlen +
- APIEXTRA) : srealloc(pktin.data,
- pktin.maxlen +
- APIEXTRA));
- if (!pktin.data)
- fatalbox("Out of memory");
+ if (ssh->sccomp &&
+ ssh->sccomp->decompress(ssh->sc_comp_ctx,
+ st->pktin->data + 5, st->pktin->length - 5,
+ &newpayload, &newlen)) {
+ if (st->pktin->maxlen < newlen + 5) {
+ st->pktin->maxlen = newlen + 5;
+ st->pktin->data = sresize(st->pktin->data,
+ st->pktin->maxlen + APIEXTRA,
+ unsigned char);
}
- pktin.length = 5 + newlen;
- memcpy(pktin.data + 5, newpayload, newlen);
+ st->pktin->length = 5 + newlen;
+ memcpy(st->pktin->data + 5, newpayload, newlen);
sfree(newpayload);
}
}
- pktin.savedpos = 6;
- pktin.type = pktin.data[5];
-
- log_packet(PKT_INCOMING, pktin.type, ssh2_pkt_type(pktin.type),
- pktin.data+6, pktin.length-6);
+ st->pktin->savedpos = 6;
+ st->pktin->body = st->pktin->data;
+ st->pktin->type = st->pktin->data[5];
- switch (pktin.type) {
- /*
- * These packets we must handle instantly.
- */
- case SSH2_MSG_DISCONNECT:
- {
- /* log reason code in disconnect message */
- char buf[256];
- int reason = GET_32BIT(pktin.data + 6);
- unsigned msglen = GET_32BIT(pktin.data + 10);
- unsigned nowlen;
- if (reason > 0 && reason < lenof(ssh2_disconnect_reasons)) {
- sprintf(buf, "Received disconnect message (%s)",
- ssh2_disconnect_reasons[reason]);
- } else {
- sprintf(buf, "Received disconnect message (unknown type %d)",
- reason);
- }
- logevent(buf);
- strcpy(buf, "Disconnection message text: ");
- nowlen = strlen(buf);
- if (msglen > sizeof(buf) - nowlen - 1)
- msglen = sizeof(buf) - nowlen - 1;
- memcpy(buf + nowlen, pktin.data + 14, msglen);
- buf[nowlen + msglen] = '\0';
- logevent(buf);
- bombout(("Server sent disconnect message\ntype %d (%s):\n\"%s\"",
- reason,
- (reason > 0 && reason < lenof(ssh2_disconnect_reasons)) ?
- ssh2_disconnect_reasons[reason] : "unknown",
- buf+nowlen));
- crReturn(0);
- }
- break;
- case SSH2_MSG_IGNORE:
- goto next_packet;
- case SSH2_MSG_DEBUG:
- {
- /* log the debug message */
- char buf[512];
- /* int display = pktin.body[6]; */
- int stringlen = GET_32BIT(pktin.data+7);
- int prefix;
- strcpy(buf, "Remote debug message: ");
- prefix = strlen(buf);
- if (stringlen > sizeof(buf)-prefix-1)
- stringlen = sizeof(buf)-prefix-1;
- memcpy(buf + prefix, pktin.data + 11, stringlen);
- buf[prefix + stringlen] = '\0';
- logevent(buf);
+ /*
+ * Log incoming packet, possibly omitting sensitive fields.
+ */
+ if (ssh->logctx) {
+ int nblanks = 0;
+ struct logblank_t blank;
+ if (ssh->logomitdata) {
+ int do_blank = FALSE, blank_prefix = 0;
+ /* "Session data" packets - omit the data field */
+ if (st->pktin->type == SSH2_MSG_CHANNEL_DATA) {
+ do_blank = TRUE; blank_prefix = 8;
+ } else if (st->pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA) {
+ do_blank = TRUE; blank_prefix = 12;
+ }
+ if (do_blank) {
+ blank.offset = blank_prefix;
+ blank.len = (st->pktin->length-6) - blank_prefix;
+ blank.type = PKTLOG_OMIT;
+ nblanks = 1;
+ }
}
- goto next_packet; /* FIXME: print the debug message */
-
- /*
- * These packets we need do nothing about here.
- */
- case SSH2_MSG_UNIMPLEMENTED:
- case SSH2_MSG_SERVICE_REQUEST:
- case SSH2_MSG_SERVICE_ACCEPT:
- case SSH2_MSG_KEXINIT:
- case SSH2_MSG_NEWKEYS:
- case SSH2_MSG_KEXDH_INIT:
- case SSH2_MSG_KEXDH_REPLY:
- /* case SSH2_MSG_KEX_DH_GEX_REQUEST: duplicate case value */
- /* case SSH2_MSG_KEX_DH_GEX_GROUP: duplicate case value */
- case SSH2_MSG_KEX_DH_GEX_INIT:
- case SSH2_MSG_KEX_DH_GEX_REPLY:
- case SSH2_MSG_USERAUTH_REQUEST:
- case SSH2_MSG_USERAUTH_FAILURE:
- case SSH2_MSG_USERAUTH_SUCCESS:
- case SSH2_MSG_USERAUTH_BANNER:
- case SSH2_MSG_USERAUTH_PK_OK:
- /* case SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ: duplicate case value */
- /* case SSH2_MSG_USERAUTH_INFO_REQUEST: duplicate case value */
- case SSH2_MSG_USERAUTH_INFO_RESPONSE:
- case SSH2_MSG_GLOBAL_REQUEST:
- case SSH2_MSG_REQUEST_SUCCESS:
- case SSH2_MSG_REQUEST_FAILURE:
- case SSH2_MSG_CHANNEL_OPEN:
- case SSH2_MSG_CHANNEL_OPEN_CONFIRMATION:
- case SSH2_MSG_CHANNEL_OPEN_FAILURE:
- case SSH2_MSG_CHANNEL_WINDOW_ADJUST:
- case SSH2_MSG_CHANNEL_DATA:
- case SSH2_MSG_CHANNEL_EXTENDED_DATA:
- case SSH2_MSG_CHANNEL_EOF:
- case SSH2_MSG_CHANNEL_CLOSE:
- case SSH2_MSG_CHANNEL_REQUEST:
- case SSH2_MSG_CHANNEL_SUCCESS:
- case SSH2_MSG_CHANNEL_FAILURE:
- break;
-
- /*
- * For anything else we send SSH2_MSG_UNIMPLEMENTED.
- */
- default:
- ssh2_pkt_init(SSH2_MSG_UNIMPLEMENTED);
- ssh2_pkt_adduint32(st->incoming_sequence - 1);
- ssh2_pkt_send();
- break;
- }
-
- crFinish(0);
-}
-
-static void ssh1_pktout_size(int len)
-{
- int pad, biglen;
-
- len += 5; /* type and CRC */
- pad = 8 - (len % 8);
- biglen = len + pad;
-
- pktout.length = len - 5;
- if (pktout.maxlen < biglen) {
- pktout.maxlen = biglen;
-#ifdef MSCRYPTOAPI
- /* Allocate enough buffer space for extra block
- * for MS CryptEncrypt() */
- pktout.data = (pktout.data == NULL ? smalloc(biglen + 12) :
- srealloc(pktout.data, biglen + 12));
-#else
- pktout.data = (pktout.data == NULL ? smalloc(biglen + 4) :
- srealloc(pktout.data, biglen + 4));
-#endif
- if (!pktout.data)
- fatalbox("Out of memory");
+ log_packet(ssh->logctx, PKT_INCOMING, st->pktin->type,
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx,
+ st->pktin->type),
+ st->pktin->data+6, st->pktin->length-6,
+ nblanks, &blank, &st->pktin->sequence);
}
- pktout.body = pktout.data + 4 + pad + 1;
-}
-static void s_wrpkt_start(int type, int len)
-{
- ssh1_pktout_size(len);
- pktout.type = type;
+ crFinish(st->pktin);
}
-static int s_wrpkt_prepare(void)
+static int s_wrpkt_prepare(Ssh ssh, struct Packet *pkt, int *offset_p)
{
- int pad, len, biglen, i;
+ int pad, biglen, i, pktoffs;
unsigned long crc;
+#ifdef __SC__
+ /*
+ * XXX various versions of SC (including 8.8.4) screw up the
+ * register allocation in this function and use the same register
+ * (D6) for len and as a temporary, with predictable results. The
+ * following sledgehammer prevents this.
+ */
+ volatile
+#endif
+ int len;
- pktout.body[-1] = pktout.type;
-
- log_packet(PKT_OUTGOING, pktout.type, ssh1_pkt_type(pktout.type),
- pktout.body, pktout.length);
+ if (ssh->logctx)
+ log_packet(ssh->logctx, PKT_OUTGOING, pkt->data[12],
+ ssh1_pkt_type(pkt->data[12]),
+ pkt->body, pkt->length - (pkt->body - pkt->data),
+ pkt->nblanks, pkt->blanks, NULL);
+ sfree(pkt->blanks); pkt->blanks = NULL;
+ pkt->nblanks = 0;
- if (ssh1_compressing) {
+ if (ssh->v1_compressing) {
unsigned char *compblk;
int complen;
- zlib_compress_block(pktout.body - 1, pktout.length + 1,
+ zlib_compress_block(ssh->cs_comp_ctx,
+ pkt->data + 12, pkt->length - 12,
&compblk, &complen);
- ssh1_pktout_size(complen - 1);
- memcpy(pktout.body - 1, compblk, complen);
+ ssh_pkt_ensure(pkt, complen + 2); /* just in case it's got bigger */
+ memcpy(pkt->data + 12, compblk, complen);
sfree(compblk);
+ pkt->length = complen + 12;
}
- len = pktout.length + 5; /* type and CRC */
+ ssh_pkt_ensure(pkt, pkt->length + 4); /* space for CRC */
+ pkt->length += 4;
+ len = pkt->length - 4 - 8; /* len(type+data+CRC) */
pad = 8 - (len % 8);
- biglen = len + pad;
+ pktoffs = 8 - pad;
+ biglen = len + pad; /* len(padding+type+data+CRC) */
+
+ for (i = pktoffs; i < 4+8; i++)
+ pkt->data[i] = random_byte();
+ crc = crc32_compute(pkt->data + pktoffs + 4, biglen - 4); /* all ex len */
+ PUT_32BIT(pkt->data + pktoffs + 4 + biglen - 4, crc);
+ PUT_32BIT(pkt->data + pktoffs, len);
- for (i = 0; i < pad; i++)
- pktout.data[i + 4] = random_byte();
- crc = crc32(pktout.data + 4, biglen - 4);
- PUT_32BIT(pktout.data + biglen, crc);
- PUT_32BIT(pktout.data, len);
+ if (ssh->cipher)
+ ssh->cipher->encrypt(ssh->v1_cipher_ctx,
+ pkt->data + pktoffs + 4, biglen);
- if (cipher)
- cipher->encrypt(pktout.data + 4, biglen);
+ if (offset_p) *offset_p = pktoffs;
+ return biglen + 4; /* len(length+padding+type+data+CRC) */
+}
- return biglen + 4;
+static int s_write(Ssh ssh, void *data, int len)
+{
+ if (ssh->logctx)
+ log_packet(ssh->logctx, PKT_OUTGOING, -1, NULL, data, len,
+ 0, NULL, NULL);
+ return sk_write(ssh->s, (char *)data, len);
}
-static void s_wrpkt(void)
+static void s_wrpkt(Ssh ssh, struct Packet *pkt)
{
- int len, backlog;
- len = s_wrpkt_prepare();
- backlog = sk_write(s, pktout.data, len);
+ int len, backlog, offset;
+ len = s_wrpkt_prepare(ssh, pkt, &offset);
+ backlog = s_write(ssh, pkt->data + offset, len);
if (backlog > SSH_MAX_BACKLOG)
- ssh_throttle_all(1, backlog);
+ ssh_throttle_all(ssh, 1, backlog);
+ ssh_free_packet(pkt);
}
-static void s_wrpkt_defer(void)
+static void s_wrpkt_defer(Ssh ssh, struct Packet *pkt)
{
- int len;
- len = s_wrpkt_prepare();
- if (deferred_len + len > deferred_size) {
- deferred_size = deferred_len + len + 128;
- deferred_send_data = srealloc(deferred_send_data, deferred_size);
+ int len, offset;
+ len = s_wrpkt_prepare(ssh, pkt, &offset);
+ if (ssh->deferred_len + len > ssh->deferred_size) {
+ ssh->deferred_size = ssh->deferred_len + len + 128;
+ ssh->deferred_send_data = sresize(ssh->deferred_send_data,
+ ssh->deferred_size,
+ unsigned char);
}
- memcpy(deferred_send_data + deferred_len, pktout.data, len);
- deferred_len += len;
+ memcpy(ssh->deferred_send_data + ssh->deferred_len,
+ pkt->data + offset, len);
+ ssh->deferred_len += len;
+ ssh_free_packet(pkt);
}
/*
- * Construct a packet with the specified contents.
+ * Construct a SSH-1 packet with the specified contents.
+ * (This all-at-once interface used to be the only one, but now SSH-1
+ * packets can also be constructed incrementally.)
*/
-static void construct_packet(int pkttype, va_list ap1, va_list ap2)
+static struct Packet *construct_packet(Ssh ssh, int pkttype, va_list ap)
{
- unsigned char *p, *argp, argchar;
- unsigned long argint;
- int pktlen, argtype, arglen;
+ int argtype;
Bignum bn;
+ struct Packet *pkt;
+
+ pkt = ssh1_pkt_init(pkttype);
- pktlen = 0;
- while ((argtype = va_arg(ap1, int)) != PKT_END) {
+ while ((argtype = va_arg(ap, int)) != PKT_END) {
+ unsigned char *argp, argchar;
+ char *sargp;
+ unsigned long argint;
+ int arglen;
switch (argtype) {
+ /* Actual fields in the packet */
case PKT_INT:
- (void) va_arg(ap1, int);
- pktlen += 4;
+ argint = va_arg(ap, int);
+ ssh_pkt_adduint32(pkt, argint);
break;
case PKT_CHAR:
- (void) va_arg(ap1, char);
- pktlen++;
+ argchar = (unsigned char) va_arg(ap, int);
+ ssh_pkt_addbyte(pkt, argchar);
break;
case PKT_DATA:
- (void) va_arg(ap1, unsigned char *);
- arglen = va_arg(ap1, int);
- pktlen += arglen;
+ argp = va_arg(ap, unsigned char *);
+ arglen = va_arg(ap, int);
+ ssh_pkt_adddata(pkt, argp, arglen);
break;
case PKT_STR:
- argp = va_arg(ap1, unsigned char *);
- arglen = strlen(argp);
- pktlen += 4 + arglen;
+ sargp = va_arg(ap, char *);
+ ssh_pkt_addstring(pkt, sargp);
break;
case PKT_BIGNUM:
- bn = va_arg(ap1, Bignum);
- pktlen += ssh1_bignum_length(bn);
- break;
- default:
- assert(0);
- }
- }
-
- s_wrpkt_start(pkttype, pktlen);
- p = pktout.body;
-
- while ((argtype = va_arg(ap2, int)) != PKT_END) {
- switch (argtype) {
- case PKT_INT:
- argint = va_arg(ap2, int);
- PUT_32BIT(p, argint);
- p += 4;
- break;
- case PKT_CHAR:
- argchar = va_arg(ap2, unsigned char);
- *p = argchar;
- p++;
+ bn = va_arg(ap, Bignum);
+ ssh1_pkt_addmp(pkt, bn);
break;
- case PKT_DATA:
- argp = va_arg(ap2, unsigned char *);
- arglen = va_arg(ap2, int);
- memcpy(p, argp, arglen);
- p += arglen;
+ /* Tokens for modifications to packet logging */
+ case PKTT_PASSWORD:
+ dont_log_password(ssh, pkt, PKTLOG_BLANK);
break;
- case PKT_STR:
- argp = va_arg(ap2, unsigned char *);
- arglen = strlen(argp);
- PUT_32BIT(p, arglen);
- memcpy(p + 4, argp, arglen);
- p += 4 + arglen;
+ case PKTT_DATA:
+ dont_log_data(ssh, pkt, PKTLOG_OMIT);
break;
- case PKT_BIGNUM:
- bn = va_arg(ap2, Bignum);
- p += ssh1_write_bignum(p, bn);
+ case PKTT_OTHER:
+ end_log_omission(ssh, pkt);
break;
}
}
+
+ return pkt;
}
-static void send_packet(int pkttype, ...)
+static void send_packet(Ssh ssh, int pkttype, ...)
{
- va_list ap1, ap2;
- va_start(ap1, pkttype);
- va_start(ap2, pkttype);
- construct_packet(pkttype, ap1, ap2);
- s_wrpkt();
+ struct Packet *pkt;
+ va_list ap;
+ va_start(ap, pkttype);
+ pkt = construct_packet(ssh, pkttype, ap);
+ va_end(ap);
+ s_wrpkt(ssh, pkt);
}
-static void defer_packet(int pkttype, ...)
+static void defer_packet(Ssh ssh, int pkttype, ...)
{
- va_list ap1, ap2;
- va_start(ap1, pkttype);
- va_start(ap2, pkttype);
- construct_packet(pkttype, ap1, ap2);
- s_wrpkt_defer();
+ struct Packet *pkt;
+ va_list ap;
+ va_start(ap, pkttype);
+ pkt = construct_packet(ssh, pkttype, ap);
+ va_end(ap);
+ s_wrpkt_defer(ssh, pkt);
}
static int ssh_versioncmp(char *a, char *b)
return 0;
}
-
/*
* Utility routines for putting an SSH-protocol `string' and
- * `uint32' into a SHA state.
+ * `uint32' into a hash state.
*/
-#include <stdio.h>
-static void sha_string(SHA_State * s, void *str, int len)
+static void hash_string(const struct ssh_hash *h, void *s, void *str, int len)
{
unsigned char lenblk[4];
PUT_32BIT(lenblk, len);
- SHA_Bytes(s, lenblk, 4);
- SHA_Bytes(s, str, len);
+ h->bytes(s, lenblk, 4);
+ h->bytes(s, str, len);
}
-static void sha_uint32(SHA_State * s, unsigned i)
+static void hash_uint32(const struct ssh_hash *h, void *s, unsigned i)
{
unsigned char intblk[4];
PUT_32BIT(intblk, i);
- SHA_Bytes(s, intblk, 4);
+ h->bytes(s, intblk, 4);
}
/*
- * SSH2 packet construction functions.
+ * Packet construction functions. Mostly shared between SSH-1 and SSH-2.
*/
-static void ssh2_pkt_ensure(int length)
+static void ssh_pkt_ensure(struct Packet *pkt, int length)
{
- if (pktout.maxlen < length) {
- pktout.maxlen = length + 256;
- pktout.data =
- (pktout.data ==
- NULL ? smalloc(pktout.maxlen +
- APIEXTRA) : srealloc(pktout.data,
- pktout.maxlen +
- APIEXTRA));
- if (!pktout.data)
- fatalbox("Out of memory");
+ if (pkt->maxlen < length) {
+ unsigned char *body = pkt->body;
+ int offset = body ? body - pkt->data : 0;
+ pkt->maxlen = length + 256;
+ pkt->data = sresize(pkt->data, pkt->maxlen + APIEXTRA, unsigned char);
+ if (body) pkt->body = pkt->data + offset;
}
}
-static void ssh2_pkt_adddata(void *data, int len)
-{
- pktout.length += len;
- ssh2_pkt_ensure(pktout.length);
- memcpy(pktout.data + pktout.length - len, data, len);
-}
-static void ssh2_pkt_addbyte(unsigned char byte)
+static void ssh_pkt_adddata(struct Packet *pkt, const void *data, int len)
{
- ssh2_pkt_adddata(&byte, 1);
+ if (pkt->logmode != PKTLOG_EMIT) {
+ pkt->nblanks++;
+ pkt->blanks = sresize(pkt->blanks, pkt->nblanks, struct logblank_t);
+ assert(pkt->body);
+ pkt->blanks[pkt->nblanks-1].offset = pkt->length -
+ (pkt->body - pkt->data);
+ pkt->blanks[pkt->nblanks-1].len = len;
+ pkt->blanks[pkt->nblanks-1].type = pkt->logmode;
+ }
+ pkt->length += len;
+ ssh_pkt_ensure(pkt, pkt->length);
+ memcpy(pkt->data + pkt->length - len, data, len);
}
-static void ssh2_pkt_init(int pkt_type)
+static void ssh_pkt_addbyte(struct Packet *pkt, unsigned char byte)
{
- pktout.length = 5;
- ssh2_pkt_addbyte((unsigned char) pkt_type);
+ ssh_pkt_adddata(pkt, &byte, 1);
}
-static void ssh2_pkt_addbool(unsigned char value)
+static void ssh2_pkt_addbool(struct Packet *pkt, unsigned char value)
{
- ssh2_pkt_adddata(&value, 1);
+ ssh_pkt_adddata(pkt, &value, 1);
}
-static void ssh2_pkt_adduint32(unsigned long value)
+static void ssh_pkt_adduint32(struct Packet *pkt, unsigned long value)
{
unsigned char x[4];
PUT_32BIT(x, value);
- ssh2_pkt_adddata(x, 4);
+ ssh_pkt_adddata(pkt, x, 4);
+}
+static void ssh_pkt_addstring_start(struct Packet *pkt)
+{
+ ssh_pkt_adduint32(pkt, 0);
+ pkt->savedpos = pkt->length;
}
-static void ssh2_pkt_addstring_start(void)
+static void ssh_pkt_addstring_str(struct Packet *pkt, const char *data)
{
- ssh2_pkt_adduint32(0);
- pktout.savedpos = pktout.length;
+ ssh_pkt_adddata(pkt, data, strlen(data));
+ PUT_32BIT(pkt->data + pkt->savedpos - 4, pkt->length - pkt->savedpos);
}
-static void ssh2_pkt_addstring_str(char *data)
+static void ssh_pkt_addstring_data(struct Packet *pkt, const char *data,
+ int len)
{
- ssh2_pkt_adddata(data, strlen(data));
- PUT_32BIT(pktout.data + pktout.savedpos - 4,
- pktout.length - pktout.savedpos);
+ ssh_pkt_adddata(pkt, data, len);
+ PUT_32BIT(pkt->data + pkt->savedpos - 4, pkt->length - pkt->savedpos);
}
-static void ssh2_pkt_addstring_data(char *data, int len)
+static void ssh_pkt_addstring(struct Packet *pkt, const char *data)
{
- ssh2_pkt_adddata(data, len);
- PUT_32BIT(pktout.data + pktout.savedpos - 4,
- pktout.length - pktout.savedpos);
+ ssh_pkt_addstring_start(pkt);
+ ssh_pkt_addstring_str(pkt, data);
}
-static void ssh2_pkt_addstring(char *data)
+static void ssh1_pkt_addmp(struct Packet *pkt, Bignum b)
{
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_str(data);
+ int len = ssh1_bignum_length(b);
+ unsigned char *data = snewn(len, unsigned char);
+ (void) ssh1_write_bignum(data, b);
+ ssh_pkt_adddata(pkt, data, len);
+ sfree(data);
}
-static char *ssh2_mpint_fmt(Bignum b, int *len)
+static unsigned char *ssh2_mpint_fmt(Bignum b, int *len)
{
unsigned char *p;
int i, n = (bignum_bitcount(b) + 7) / 8;
- p = smalloc(n + 1);
- if (!p)
- fatalbox("out of memory");
+ p = snewn(n + 1, unsigned char);
p[0] = 0;
for (i = 1; i <= n; i++)
p[i] = bignum_byte(b, n - i);
*len = n + 1 - i;
return p;
}
-static void ssh2_pkt_addmp(Bignum b)
+static void ssh2_pkt_addmp(struct Packet *pkt, Bignum b)
{
unsigned char *p;
int len;
p = ssh2_mpint_fmt(b, &len);
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data(p, len);
+ ssh_pkt_addstring_start(pkt);
+ ssh_pkt_addstring_data(pkt, (char *)p, len);
sfree(p);
}
+static struct Packet *ssh1_pkt_init(int pkt_type)
+{
+ struct Packet *pkt = ssh_new_packet();
+ pkt->length = 4 + 8; /* space for length + max padding */
+ ssh_pkt_addbyte(pkt, pkt_type);
+ pkt->body = pkt->data + pkt->length;
+ return pkt;
+}
+
+/* For legacy code (SSH-1 and -2 packet construction used to be separate) */
+#define ssh2_pkt_ensure(pkt, length) ssh_pkt_ensure(pkt, length)
+#define ssh2_pkt_adddata(pkt, data, len) ssh_pkt_adddata(pkt, data, len)
+#define ssh2_pkt_addbyte(pkt, byte) ssh_pkt_addbyte(pkt, byte)
+#define ssh2_pkt_adduint32(pkt, value) ssh_pkt_adduint32(pkt, value)
+#define ssh2_pkt_addstring_start(pkt) ssh_pkt_addstring_start(pkt)
+#define ssh2_pkt_addstring_str(pkt, data) ssh_pkt_addstring_str(pkt, data)
+#define ssh2_pkt_addstring_data(pkt, data, len) ssh_pkt_addstring_data(pkt, data, len)
+#define ssh2_pkt_addstring(pkt, data) ssh_pkt_addstring(pkt, data)
+
+static struct Packet *ssh2_pkt_init(int pkt_type)
+{
+ struct Packet *pkt = ssh_new_packet();
+ pkt->length = 5; /* space for packet length + padding length */
+ pkt->forcepad = 0;
+ ssh_pkt_addbyte(pkt, (unsigned char) pkt_type);
+ pkt->body = pkt->data + pkt->length; /* after packet type */
+ return pkt;
+}
+
/*
- * Construct an SSH2 final-form packet: compress it, encrypt it,
+ * Construct an SSH-2 final-form packet: compress it, encrypt it,
* put the MAC on it. Final packet, ready to be sent, is stored in
- * pktout.data. Total length is returned.
+ * pkt->data. Total length is returned.
*/
-static int ssh2_pkt_construct(void)
+static int ssh2_pkt_construct(Ssh ssh, struct Packet *pkt)
{
int cipherblk, maclen, padding, i;
- static unsigned long outgoing_sequence = 0;
- log_packet(PKT_OUTGOING, pktout.data[5], ssh2_pkt_type(pktout.data[5]),
- pktout.data + 6, pktout.length - 6);
+ if (ssh->logctx)
+ log_packet(ssh->logctx, PKT_OUTGOING, pkt->data[5],
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx, pkt->data[5]),
+ pkt->body, pkt->length - (pkt->body - pkt->data),
+ pkt->nblanks, pkt->blanks, &ssh->v2_outgoing_sequence);
+ sfree(pkt->blanks); pkt->blanks = NULL;
+ pkt->nblanks = 0;
/*
* Compress packet payload.
{
unsigned char *newpayload;
int newlen;
- if (cscomp && cscomp->compress(pktout.data + 5, pktout.length - 5,
- &newpayload, &newlen)) {
- pktout.length = 5;
- ssh2_pkt_adddata(newpayload, newlen);
+ if (ssh->cscomp &&
+ ssh->cscomp->compress(ssh->cs_comp_ctx, pkt->data + 5,
+ pkt->length - 5,
+ &newpayload, &newlen)) {
+ pkt->length = 5;
+ ssh2_pkt_adddata(pkt, newpayload, newlen);
sfree(newpayload);
}
}
/*
* Add padding. At least four bytes, and must also bring total
* length (minus MAC) up to a multiple of the block size.
+ * If pkt->forcepad is set, make sure the packet is at least that size
+ * after padding.
*/
- cipherblk = cscipher ? cscipher->blksize : 8; /* block size */
+ cipherblk = ssh->cscipher ? ssh->cscipher->blksize : 8; /* block size */
cipherblk = cipherblk < 8 ? 8 : cipherblk; /* or 8 if blksize < 8 */
padding = 4;
+ if (pkt->length + padding < pkt->forcepad)
+ padding = pkt->forcepad - pkt->length;
padding +=
- (cipherblk - (pktout.length + padding) % cipherblk) % cipherblk;
- maclen = csmac ? csmac->len : 0;
- ssh2_pkt_ensure(pktout.length + padding + maclen);
- pktout.data[4] = padding;
+ (cipherblk - (pkt->length + padding) % cipherblk) % cipherblk;
+ assert(padding <= 255);
+ maclen = ssh->csmac ? ssh->csmac->len : 0;
+ ssh2_pkt_ensure(pkt, pkt->length + padding + maclen);
+ pkt->data[4] = padding;
for (i = 0; i < padding; i++)
- pktout.data[pktout.length + i] = random_byte();
- PUT_32BIT(pktout.data, pktout.length + padding - 4);
- if (csmac)
- csmac->generate(pktout.data, pktout.length + padding,
- outgoing_sequence);
- outgoing_sequence++; /* whether or not we MACed */
+ pkt->data[pkt->length + i] = random_byte();
+ PUT_32BIT(pkt->data, pkt->length + padding - 4);
+ if (ssh->csmac)
+ ssh->csmac->generate(ssh->cs_mac_ctx, pkt->data,
+ pkt->length + padding,
+ ssh->v2_outgoing_sequence);
+ ssh->v2_outgoing_sequence++; /* whether or not we MACed */
+
+ if (ssh->cscipher)
+ ssh->cscipher->encrypt(ssh->cs_cipher_ctx,
+ pkt->data, pkt->length + padding);
+
+ pkt->encrypted_len = pkt->length + padding;
+
+ /* Ready-to-send packet starts at pkt->data. We return length. */
+ return pkt->length + padding + maclen;
+}
- if (cscipher)
- cscipher->encrypt(pktout.data, pktout.length + padding);
+/*
+ * Routines called from the main SSH code to send packets. There
+ * are quite a few of these, because we have two separate
+ * mechanisms for delaying the sending of packets:
+ *
+ * - In order to send an IGNORE message and a password message in
+ * a single fixed-length blob, we require the ability to
+ * concatenate the encrypted forms of those two packets _into_ a
+ * single blob and then pass it to our <network.h> transport
+ * layer in one go. Hence, there's a deferment mechanism which
+ * works after packet encryption.
+ *
+ * - In order to avoid sending any connection-layer messages
+ * during repeat key exchange, we have to queue up any such
+ * outgoing messages _before_ they are encrypted (and in
+ * particular before they're allocated sequence numbers), and
+ * then send them once we've finished.
+ *
+ * I call these mechanisms `defer' and `queue' respectively, so as
+ * to distinguish them reasonably easily.
+ *
+ * The functions send_noqueue() and defer_noqueue() free the packet
+ * structure they are passed. Every outgoing packet goes through
+ * precisely one of these functions in its life; packets passed to
+ * ssh2_pkt_send() or ssh2_pkt_defer() either go straight to one of
+ * these or get queued, and then when the queue is later emptied
+ * the packets are all passed to defer_noqueue().
+ *
+ * When using a CBC-mode cipher, it's necessary to ensure that an
+ * attacker can't provide data to be encrypted using an IV that they
+ * know. We ensure this by prefixing each packet that might contain
+ * user data with an SSH_MSG_IGNORE. This is done using the deferral
+ * mechanism, so in this case send_noqueue() ends up redirecting to
+ * defer_noqueue(). If you don't like this inefficiency, don't use
+ * CBC.
+ */
- /* Ready-to-send packet starts at pktout.data. We return length. */
- return pktout.length + padding + maclen;
-}
+static void ssh2_pkt_defer_noqueue(Ssh, struct Packet *, int);
+static void ssh_pkt_defersend(Ssh);
/*
- * Construct and send an SSH2 packet immediately.
+ * Send an SSH-2 packet immediately, without queuing or deferring.
*/
-static void ssh2_pkt_send(void)
+static void ssh2_pkt_send_noqueue(Ssh ssh, struct Packet *pkt)
{
int len;
int backlog;
- len = ssh2_pkt_construct();
- backlog = sk_write(s, pktout.data, len);
+ if (ssh->cscipher != NULL && (ssh->cscipher->flags & SSH_CIPHER_IS_CBC)) {
+ /* We need to send two packets, so use the deferral mechanism. */
+ ssh2_pkt_defer_noqueue(ssh, pkt, FALSE);
+ ssh_pkt_defersend(ssh);
+ return;
+ }
+ len = ssh2_pkt_construct(ssh, pkt);
+ backlog = s_write(ssh, pkt->data, len);
if (backlog > SSH_MAX_BACKLOG)
- ssh_throttle_all(1, backlog);
+ ssh_throttle_all(ssh, 1, backlog);
+
+ ssh->outgoing_data_size += pkt->encrypted_len;
+ if (!ssh->kex_in_progress &&
+ ssh->max_data_size != 0 &&
+ ssh->outgoing_data_size > ssh->max_data_size)
+ do_ssh2_transport(ssh, "too much data sent", -1, NULL);
+
+ ssh_free_packet(pkt);
}
/*
- * Construct an SSH2 packet and add it to a deferred data block.
- * Useful for sending multiple packets in a single sk_write() call,
- * to prevent a traffic-analysing listener from being able to work
- * out the length of any particular packet (such as the password
- * packet).
- *
- * Note that because SSH2 sequence-numbers its packets, this can
- * NOT be used as an m4-style `defer' allowing packets to be
- * constructed in one order and sent in another.
+ * Defer an SSH-2 packet.
+ */
+static void ssh2_pkt_defer_noqueue(Ssh ssh, struct Packet *pkt, int noignore)
+{
+ int len;
+ if (ssh->cscipher != NULL && (ssh->cscipher->flags & SSH_CIPHER_IS_CBC) &&
+ ssh->deferred_len == 0 && !noignore &&
+ !(ssh->remote_bugs & BUG_CHOKES_ON_SSH2_IGNORE)) {
+ /*
+ * Interpose an SSH_MSG_IGNORE to ensure that user data don't
+ * get encrypted with a known IV.
+ */
+ struct Packet *ipkt = ssh2_pkt_init(SSH2_MSG_IGNORE);
+ ssh2_pkt_addstring_start(ipkt);
+ ssh2_pkt_defer_noqueue(ssh, ipkt, TRUE);
+ }
+ len = ssh2_pkt_construct(ssh, pkt);
+ if (ssh->deferred_len + len > ssh->deferred_size) {
+ ssh->deferred_size = ssh->deferred_len + len + 128;
+ ssh->deferred_send_data = sresize(ssh->deferred_send_data,
+ ssh->deferred_size,
+ unsigned char);
+ }
+ memcpy(ssh->deferred_send_data + ssh->deferred_len, pkt->data, len);
+ ssh->deferred_len += len;
+ ssh->deferred_data_size += pkt->encrypted_len;
+ ssh_free_packet(pkt);
+}
+
+/*
+ * Queue an SSH-2 packet.
*/
-static void ssh2_pkt_defer(void)
+static void ssh2_pkt_queue(Ssh ssh, struct Packet *pkt)
{
- int len = ssh2_pkt_construct();
- if (deferred_len + len > deferred_size) {
- deferred_size = deferred_len + len + 128;
- deferred_send_data = srealloc(deferred_send_data, deferred_size);
+ assert(ssh->queueing);
+
+ if (ssh->queuelen >= ssh->queuesize) {
+ ssh->queuesize = ssh->queuelen + 32;
+ ssh->queue = sresize(ssh->queue, ssh->queuesize, struct Packet *);
}
- memcpy(deferred_send_data + deferred_len, pktout.data, len);
- deferred_len += len;
+
+ ssh->queue[ssh->queuelen++] = pkt;
+}
+
+/*
+ * Either queue or send a packet, depending on whether queueing is
+ * set.
+ */
+static void ssh2_pkt_send(Ssh ssh, struct Packet *pkt)
+{
+ if (ssh->queueing)
+ ssh2_pkt_queue(ssh, pkt);
+ else
+ ssh2_pkt_send_noqueue(ssh, pkt);
+}
+
+/*
+ * Either queue or defer a packet, depending on whether queueing is
+ * set.
+ */
+static void ssh2_pkt_defer(Ssh ssh, struct Packet *pkt)
+{
+ if (ssh->queueing)
+ ssh2_pkt_queue(ssh, pkt);
+ else
+ ssh2_pkt_defer_noqueue(ssh, pkt, FALSE);
}
/*
* Send the whole deferred data block constructed by
- * ssh2_pkt_defer() or SSH1's defer_packet().
+ * ssh2_pkt_defer() or SSH-1's defer_packet().
+ *
+ * The expected use of the defer mechanism is that you call
+ * ssh2_pkt_defer() a few times, then call ssh_pkt_defersend(). If
+ * not currently queueing, this simply sets up deferred_send_data
+ * and then sends it. If we _are_ currently queueing, the calls to
+ * ssh2_pkt_defer() put the deferred packets on to the queue
+ * instead, and therefore ssh_pkt_defersend() has no deferred data
+ * to send. Hence, there's no need to make it conditional on
+ * ssh->queueing.
*/
-static void ssh_pkt_defersend(void)
+static void ssh_pkt_defersend(Ssh ssh)
{
int backlog;
- backlog = sk_write(s, deferred_send_data, deferred_len);
- deferred_len = deferred_size = 0;
- sfree(deferred_send_data);
- deferred_send_data = NULL;
+ backlog = s_write(ssh, ssh->deferred_send_data, ssh->deferred_len);
+ ssh->deferred_len = ssh->deferred_size = 0;
+ sfree(ssh->deferred_send_data);
+ ssh->deferred_send_data = NULL;
if (backlog > SSH_MAX_BACKLOG)
- ssh_throttle_all(1, backlog);
+ ssh_throttle_all(ssh, 1, backlog);
+
+ ssh->outgoing_data_size += ssh->deferred_data_size;
+ if (!ssh->kex_in_progress &&
+ ssh->max_data_size != 0 &&
+ ssh->outgoing_data_size > ssh->max_data_size)
+ do_ssh2_transport(ssh, "too much data sent", -1, NULL);
+ ssh->deferred_data_size = 0;
+}
+
+/*
+ * Send a packet whose length needs to be disguised (typically
+ * passwords or keyboard-interactive responses).
+ */
+static void ssh2_pkt_send_with_padding(Ssh ssh, struct Packet *pkt,
+ int padsize)
+{
+#if 0
+ if (0) {
+ /*
+ * The simplest way to do this is to adjust the
+ * variable-length padding field in the outgoing packet.
+ *
+ * Currently compiled out, because some Cisco SSH servers
+ * don't like excessively padded packets (bah, why's it
+ * always Cisco?)
+ */
+ pkt->forcepad = padsize;
+ ssh2_pkt_send(ssh, pkt);
+ } else
+#endif
+ {
+ /*
+ * If we can't do that, however, an alternative approach is
+ * to use the pkt_defer mechanism to bundle the packet
+ * tightly together with an SSH_MSG_IGNORE such that their
+ * combined length is a constant. So first we construct the
+ * final form of this packet and defer its sending.
+ */
+ ssh2_pkt_defer(ssh, pkt);
+
+ /*
+ * Now construct an SSH_MSG_IGNORE which includes a string
+ * that's an exact multiple of the cipher block size. (If
+ * the cipher is NULL so that the block size is
+ * unavailable, we don't do this trick at all, because we
+ * gain nothing by it.)
+ */
+ if (ssh->cscipher &&
+ !(ssh->remote_bugs & BUG_CHOKES_ON_SSH2_IGNORE)) {
+ int stringlen, i;
+
+ stringlen = (256 - ssh->deferred_len);
+ stringlen += ssh->cscipher->blksize - 1;
+ stringlen -= (stringlen % ssh->cscipher->blksize);
+ if (ssh->cscomp) {
+ /*
+ * Temporarily disable actual compression, so we
+ * can guarantee to get this string exactly the
+ * length we want it. The compression-disabling
+ * routine should return an integer indicating how
+ * many bytes we should adjust our string length
+ * by.
+ */
+ stringlen -=
+ ssh->cscomp->disable_compression(ssh->cs_comp_ctx);
+ }
+ pkt = ssh2_pkt_init(SSH2_MSG_IGNORE);
+ ssh2_pkt_addstring_start(pkt);
+ for (i = 0; i < stringlen; i++) {
+ char c = (char) random_byte();
+ ssh2_pkt_addstring_data(pkt, &c, 1);
+ }
+ ssh2_pkt_defer(ssh, pkt);
+ }
+ ssh_pkt_defersend(ssh);
+ }
+}
+
+/*
+ * Send all queued SSH-2 packets. We send them by means of
+ * ssh2_pkt_defer_noqueue(), in case they included a pair of
+ * packets that needed to be lumped together.
+ */
+static void ssh2_pkt_queuesend(Ssh ssh)
+{
+ int i;
+
+ assert(!ssh->queueing);
+
+ for (i = 0; i < ssh->queuelen; i++)
+ ssh2_pkt_defer_noqueue(ssh, ssh->queue[i], FALSE);
+ ssh->queuelen = 0;
+
+ ssh_pkt_defersend(ssh);
}
#if 0
}
#endif
-static void sha_mpint(SHA_State * s, Bignum b)
+static void hash_mpint(const struct ssh_hash *h, void *s, Bignum b)
{
unsigned char *p;
int len;
p = ssh2_mpint_fmt(b, &len);
- sha_string(s, p, len);
+ hash_string(h, s, p, len);
sfree(p);
}
/*
- * SSH2 packet decode functions.
+ * Packet decode functions for both SSH-1 and SSH-2.
*/
-static unsigned long ssh2_pkt_getuint32(void)
+static unsigned long ssh_pkt_getuint32(struct Packet *pkt)
{
unsigned long value;
- if (pktin.length - pktin.savedpos < 4)
+ if (pkt->length - pkt->savedpos < 4)
return 0; /* arrgh, no way to decline (FIXME?) */
- value = GET_32BIT(pktin.data + pktin.savedpos);
- pktin.savedpos += 4;
+ value = GET_32BIT(pkt->body + pkt->savedpos);
+ pkt->savedpos += 4;
return value;
}
-static int ssh2_pkt_getbool(void)
+static int ssh2_pkt_getbool(struct Packet *pkt)
{
unsigned long value;
- if (pktin.length - pktin.savedpos < 1)
+ if (pkt->length - pkt->savedpos < 1)
return 0; /* arrgh, no way to decline (FIXME?) */
- value = pktin.data[pktin.savedpos] != 0;
- pktin.savedpos++;
+ value = pkt->body[pkt->savedpos] != 0;
+ pkt->savedpos++;
return value;
}
-static void ssh2_pkt_getstring(char **p, int *length)
+static void ssh_pkt_getstring(struct Packet *pkt, char **p, int *length)
{
+ int len;
*p = NULL;
*length = 0;
- if (pktin.length - pktin.savedpos < 4)
+ if (pkt->length - pkt->savedpos < 4)
return;
- *length = GET_32BIT(pktin.data + pktin.savedpos);
- pktin.savedpos += 4;
- if (pktin.length - pktin.savedpos < *length)
+ len = toint(GET_32BIT(pkt->body + pkt->savedpos));
+ if (len < 0)
return;
- *p = pktin.data + pktin.savedpos;
- pktin.savedpos += *length;
+ *length = len;
+ pkt->savedpos += 4;
+ if (pkt->length - pkt->savedpos < *length)
+ return;
+ *p = (char *)(pkt->body + pkt->savedpos);
+ pkt->savedpos += *length;
+}
+static void *ssh_pkt_getdata(struct Packet *pkt, int length)
+{
+ if (pkt->length - pkt->savedpos < length)
+ return NULL;
+ pkt->savedpos += length;
+ return pkt->body + (pkt->savedpos - length);
+}
+static int ssh1_pkt_getrsakey(struct Packet *pkt, struct RSAKey *key,
+ unsigned char **keystr)
+{
+ int j;
+
+ j = makekey(pkt->body + pkt->savedpos,
+ pkt->length - pkt->savedpos,
+ key, keystr, 0);
+
+ if (j < 0)
+ return FALSE;
+
+ pkt->savedpos += j;
+ assert(pkt->savedpos < pkt->length);
+
+ return TRUE;
+}
+static Bignum ssh1_pkt_getmp(struct Packet *pkt)
+{
+ int j;
+ Bignum b;
+
+ j = ssh1_read_bignum(pkt->body + pkt->savedpos,
+ pkt->length - pkt->savedpos, &b);
+
+ if (j < 0)
+ return NULL;
+
+ pkt->savedpos += j;
+ return b;
}
-static Bignum ssh2_pkt_getmp(void)
+static Bignum ssh2_pkt_getmp(struct Packet *pkt)
{
char *p;
int length;
Bignum b;
- ssh2_pkt_getstring(&p, &length);
+ ssh_pkt_getstring(pkt, &p, &length);
if (!p)
return NULL;
- if (p[0] & 0x80) {
- bombout(("internal error: Can't handle negative mpints"));
+ if (p[0] & 0x80)
return NULL;
- }
- b = bignum_from_bytes(p, length);
+ b = bignum_from_bytes((unsigned char *)p, length);
return b;
}
/*
- * Helper function to add an SSH2 signature blob to a packet.
+ * Helper function to add an SSH-2 signature blob to a packet.
* Expects to be shown the public key blob as well as the signature
* blob. Normally works just like ssh2_pkt_addstring, but will
* fiddle with the signature packet if necessary for
* BUG_SSH2_RSA_PADDING.
*/
-static void ssh2_add_sigblob(void *pkblob_v, int pkblob_len,
+static void ssh2_add_sigblob(Ssh ssh, struct Packet *pkt,
+ void *pkblob_v, int pkblob_len,
void *sigblob_v, int sigblob_len)
{
unsigned char *pkblob = (unsigned char *)pkblob_v;
* See if this is in fact an ssh-rsa signature and a buggy
* server; otherwise we can just do this the easy way.
*/
- if ((ssh_remote_bugs & BUG_SSH2_RSA_PADDING) &&
+ if ((ssh->remote_bugs & BUG_SSH2_RSA_PADDING) && pkblob_len > 4+7+4 &&
(GET_32BIT(pkblob) == 7 && !memcmp(pkblob+4, "ssh-rsa", 7))) {
int pos, len, siglen;
*/
pos = 4+7; /* skip over "ssh-rsa" */
- pos += 4 + GET_32BIT(pkblob+pos); /* skip over exponent */
- len = GET_32BIT(pkblob+pos); /* find length of modulus */
+ len = toint(GET_32BIT(pkblob+pos)); /* get length of exponent */
+ if (len < 0 || len > pkblob_len - pos - 4)
+ goto give_up;
+ pos += 4 + len; /* skip over exponent */
+ if (pkblob_len - pos < 4)
+ goto give_up;
+ len = toint(GET_32BIT(pkblob+pos)); /* find length of modulus */
+ if (len < 0 || len > pkblob_len - pos - 4)
+ goto give_up;
pos += 4; /* find modulus itself */
while (len > 0 && pkblob[pos] == 0)
len--, pos++;
* Now find the signature integer.
*/
pos = 4+7; /* skip over "ssh-rsa" */
- siglen = GET_32BIT(sigblob+pos);
+ if (sigblob_len < pos+4)
+ goto give_up;
+ siglen = toint(GET_32BIT(sigblob+pos));
+ if (siglen != sigblob_len - pos - 4)
+ goto give_up;
/* debug(("signature length is %d\n", siglen)); */
if (len != siglen) {
unsigned char newlen[4];
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data(sigblob, pos);
+ ssh2_pkt_addstring_start(pkt);
+ ssh2_pkt_addstring_data(pkt, (char *)sigblob, pos);
/* dmemdump(sigblob, pos); */
pos += 4; /* point to start of actual sig */
PUT_32BIT(newlen, len);
- ssh2_pkt_addstring_data(newlen, 4);
+ ssh2_pkt_addstring_data(pkt, (char *)newlen, 4);
/* dmemdump(newlen, 4); */
newlen[0] = 0;
while (len-- > siglen) {
- ssh2_pkt_addstring_data(newlen, 1);
+ ssh2_pkt_addstring_data(pkt, (char *)newlen, 1);
/* dmemdump(newlen, 1); */
}
- ssh2_pkt_addstring_data(sigblob+pos, siglen);
+ ssh2_pkt_addstring_data(pkt, (char *)(sigblob+pos), siglen);
/* dmemdump(sigblob+pos, siglen); */
return;
}
- /* Otherwise fall through and do it the easy way. */
+ /* Otherwise fall through and do it the easy way. We also come
+ * here as a fallback if we discover above that the key blob
+ * is misformatted in some way. */
+ give_up:;
}
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data(sigblob, sigblob_len);
+ ssh2_pkt_addstring_start(pkt);
+ ssh2_pkt_addstring_data(pkt, (char *)sigblob, sigblob_len);
}
/*
* Examine the remote side's version string and compare it against
* a list of known buggy implementations.
*/
-static void ssh_detect_bugs(char *vstring)
+static void ssh_detect_bugs(Ssh ssh, char *vstring)
{
char *imp; /* pointer to implementation part */
imp = vstring;
imp += strcspn(imp, "-");
if (*imp) imp++;
- ssh_remote_bugs = 0;
+ ssh->remote_bugs = 0;
- if (cfg.sshbug_ignore1 == BUG_ON ||
- (cfg.sshbug_ignore1 == BUG_AUTO &&
+ /*
+ * General notes on server version strings:
+ * - Not all servers reporting "Cisco-1.25" have all the bugs listed
+ * here -- in particular, we've heard of one that's perfectly happy
+ * with SSH1_MSG_IGNOREs -- but this string never seems to change,
+ * so we can't distinguish them.
+ */
+ if (conf_get_int(ssh->conf, CONF_sshbug_ignore1) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_ignore1) == AUTO &&
(!strcmp(imp, "1.2.18") || !strcmp(imp, "1.2.19") ||
!strcmp(imp, "1.2.20") || !strcmp(imp, "1.2.21") ||
- !strcmp(imp, "1.2.22") || !strcmp(imp, "Cisco-1.25")))) {
+ !strcmp(imp, "1.2.22") || !strcmp(imp, "Cisco-1.25") ||
+ !strcmp(imp, "OSU_1.4alpha3") || !strcmp(imp, "OSU_1.5alpha4")))) {
/*
* These versions don't support SSH1_MSG_IGNORE, so we have
* to use a different defence against password length
* sniffing.
*/
- ssh_remote_bugs |= BUG_CHOKES_ON_SSH1_IGNORE;
- logevent("We believe remote version has SSH1 ignore bug");
+ ssh->remote_bugs |= BUG_CHOKES_ON_SSH1_IGNORE;
+ logevent("We believe remote version has SSH-1 ignore bug");
}
- if (cfg.sshbug_plainpw1 == BUG_ON ||
- (cfg.sshbug_plainpw1 == BUG_AUTO &&
- (!strcmp(imp, "Cisco-1.25")))) {
+ if (conf_get_int(ssh->conf, CONF_sshbug_plainpw1) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_plainpw1) == AUTO &&
+ (!strcmp(imp, "Cisco-1.25") || !strcmp(imp, "OSU_1.4alpha3")))) {
/*
* These versions need a plain password sent; they can't
* handle having a null and a random length of data after
* the password.
*/
- ssh_remote_bugs |= BUG_NEEDS_SSH1_PLAIN_PASSWORD;
- logevent("We believe remote version needs a plain SSH1 password");
+ ssh->remote_bugs |= BUG_NEEDS_SSH1_PLAIN_PASSWORD;
+ logevent("We believe remote version needs a plain SSH-1 password");
}
- if (cfg.sshbug_rsa1 == BUG_ON ||
- (cfg.sshbug_rsa1 == BUG_AUTO &&
+ if (conf_get_int(ssh->conf, CONF_sshbug_rsa1) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_rsa1) == AUTO &&
(!strcmp(imp, "Cisco-1.25")))) {
/*
* These versions apparently have no clue whatever about
* RSA authentication and will panic and die if they see
* an AUTH_RSA message.
*/
- ssh_remote_bugs |= BUG_CHOKES_ON_RSA;
- logevent("We believe remote version can't handle RSA authentication");
+ ssh->remote_bugs |= BUG_CHOKES_ON_RSA;
+ logevent("We believe remote version can't handle SSH-1 RSA authentication");
}
- if (cfg.sshbug_hmac2 == BUG_ON ||
- (cfg.sshbug_hmac2 == BUG_AUTO &&
- (!strncmp(imp, "2.1.0", 5) || !strncmp(imp, "2.0.", 4) ||
- !strncmp(imp, "2.2.0", 5) || !strncmp(imp, "2.3.0", 5) ||
- !strncmp(imp, "2.1 ", 4)))) {
+ if (conf_get_int(ssh->conf, CONF_sshbug_hmac2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_hmac2) == AUTO &&
+ !wc_match("* VShell", imp) &&
+ (wc_match("2.1.0*", imp) || wc_match("2.0.*", imp) ||
+ wc_match("2.2.0*", imp) || wc_match("2.3.0*", imp) ||
+ wc_match("2.1 *", imp)))) {
/*
* These versions have the HMAC bug.
*/
- ssh_remote_bugs |= BUG_SSH2_HMAC;
- logevent("We believe remote version has SSH2 HMAC bug");
+ ssh->remote_bugs |= BUG_SSH2_HMAC;
+ logevent("We believe remote version has SSH-2 HMAC bug");
}
- if (cfg.sshbug_derivekey2 == BUG_ON ||
- (cfg.sshbug_derivekey2 == BUG_AUTO &&
- (!strncmp(imp, "2.0.", 4)))) {
+ if (conf_get_int(ssh->conf, CONF_sshbug_derivekey2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_derivekey2) == AUTO &&
+ !wc_match("* VShell", imp) &&
+ (wc_match("2.0.0*", imp) || wc_match("2.0.10*", imp) ))) {
/*
* These versions have the key-derivation bug (failing to
* include the literal shared secret in the hashes that
* generate the keys).
*/
- ssh_remote_bugs |= BUG_SSH2_DERIVEKEY;
- logevent("We believe remote version has SSH2 key-derivation bug");
+ ssh->remote_bugs |= BUG_SSH2_DERIVEKEY;
+ logevent("We believe remote version has SSH-2 key-derivation bug");
+ }
+
+ if (conf_get_int(ssh->conf, CONF_sshbug_rsapad2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_rsapad2) == AUTO &&
+ (wc_match("OpenSSH_2.[5-9]*", imp) ||
+ wc_match("OpenSSH_3.[0-2]*", imp)))) {
+ /*
+ * These versions have the SSH-2 RSA padding bug.
+ */
+ ssh->remote_bugs |= BUG_SSH2_RSA_PADDING;
+ logevent("We believe remote version has SSH-2 RSA padding bug");
+ }
+
+ if (conf_get_int(ssh->conf, CONF_sshbug_pksessid2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_pksessid2) == AUTO &&
+ wc_match("OpenSSH_2.[0-2]*", imp))) {
+ /*
+ * These versions have the SSH-2 session-ID bug in
+ * public-key authentication.
+ */
+ ssh->remote_bugs |= BUG_SSH2_PK_SESSIONID;
+ logevent("We believe remote version has SSH-2 public-key-session-ID bug");
+ }
+
+ if (conf_get_int(ssh->conf, CONF_sshbug_rekey2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_rekey2) == AUTO &&
+ (wc_match("DigiSSH_2.0", imp) ||
+ wc_match("OpenSSH_2.[0-4]*", imp) ||
+ wc_match("OpenSSH_2.5.[0-3]*", imp) ||
+ wc_match("Sun_SSH_1.0", imp) ||
+ wc_match("Sun_SSH_1.0.1", imp) ||
+ /* All versions <= 1.2.6 (they changed their format in 1.2.7) */
+ wc_match("WeOnlyDo-*", imp)))) {
+ /*
+ * These versions have the SSH-2 rekey bug.
+ */
+ ssh->remote_bugs |= BUG_SSH2_REKEY;
+ logevent("We believe remote version has SSH-2 rekey bug");
+ }
+
+ if (conf_get_int(ssh->conf, CONF_sshbug_maxpkt2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_maxpkt2) == AUTO &&
+ (wc_match("1.36_sshlib GlobalSCAPE", imp) ||
+ wc_match("1.36 sshlib: GlobalScape", imp)))) {
+ /*
+ * This version ignores our makpkt and needs to be throttled.
+ */
+ ssh->remote_bugs |= BUG_SSH2_MAXPKT;
+ logevent("We believe remote version ignores SSH-2 maximum packet size");
}
- if (cfg.sshbug_rsapad2 == BUG_ON ||
- (cfg.sshbug_rsapad2 == BUG_AUTO &&
- ((!strncmp(imp, "OpenSSH_2.", 10) && imp[10]>='5' && imp[10]<='9') ||
- (!strncmp(imp, "OpenSSH_3.", 10) && imp[10]>='0' && imp[10]<='2')))){
+ if (conf_get_int(ssh->conf, CONF_sshbug_ignore2) == FORCE_ON) {
/*
- * These versions have the SSH2 RSA padding bug.
+ * Servers that don't support SSH2_MSG_IGNORE. Currently,
+ * none detected automatically.
*/
- ssh_remote_bugs |= BUG_SSH2_RSA_PADDING;
- logevent("We believe remote version has SSH2 RSA padding bug");
+ ssh->remote_bugs |= BUG_CHOKES_ON_SSH2_IGNORE;
+ logevent("We believe remote version has SSH-2 ignore bug");
}
- if (cfg.sshbug_dhgex2 == BUG_ON) {
+ if (conf_get_int(ssh->conf, CONF_sshbug_winadj) == FORCE_ON) {
/*
- * These versions have the SSH2 DH GEX bug.
+ * Servers that don't support our winadj request for one
+ * reason or another. Currently, none detected automatically.
*/
- ssh_remote_bugs |= BUG_SSH2_DH_GEX;
- logevent("We believe remote version has SSH2 DH group exchange bug");
+ ssh->remote_bugs |= BUG_CHOKES_ON_WINADJ;
+ logevent("We believe remote version has winadj bug");
}
}
-static int do_ssh_init(unsigned char c)
+/*
+ * The `software version' part of an SSH version string is required
+ * to contain no spaces or minus signs.
+ */
+static void ssh_fix_verstring(char *str)
{
- static int vslen;
- static char version[10];
- static char *vstring;
- static int vstrsize;
- static char *vlog;
- static int i;
- static int proto1, proto2;
+ /* Eat "SSH-<protoversion>-". */
+ assert(*str == 'S'); str++;
+ assert(*str == 'S'); str++;
+ assert(*str == 'H'); str++;
+ assert(*str == '-'); str++;
+ while (*str && *str != '-') str++;
+ assert(*str == '-'); str++;
+
+ /* Convert minus signs and spaces in the remaining string into
+ * underscores. */
+ while (*str) {
+ if (*str == '-' || *str == ' ')
+ *str = '_';
+ str++;
+ }
+}
- crBegin;
+/*
+ * Send an appropriate SSH version string.
+ */
+static void ssh_send_verstring(Ssh ssh, char *svers)
+{
+ char *verstring;
- /* Search for the string "SSH-" in the input. */
- i = 0;
- while (1) {
- static const int transS[] = { 1, 2, 2, 1 };
- static const int transH[] = { 0, 0, 3, 0 };
- static const int transminus[] = { 0, 0, 0, -1 };
- if (c == 'S')
- i = transS[i];
- else if (c == 'H')
- i = transH[i];
- else if (c == '-')
- i = transminus[i];
- else
- i = 0;
- if (i < 0)
- break;
- crReturn(1); /* get another character */
+ if (ssh->version == 2) {
+ /*
+ * Construct a v2 version string.
+ */
+ verstring = dupprintf("SSH-2.0-%s\015\012", sshver);
+ } else {
+ /*
+ * Construct a v1 version string.
+ */
+ verstring = dupprintf("SSH-%s-%s\012",
+ (ssh_versioncmp(svers, "1.5") <= 0 ?
+ svers : "1.5"),
+ sshver);
}
- vstrsize = 16;
- vstring = smalloc(vstrsize);
- strcpy(vstring, "SSH-");
- vslen = 4;
- i = 0;
+ ssh_fix_verstring(verstring);
+
+ if (ssh->version == 2) {
+ size_t len;
+ /*
+ * Record our version string.
+ */
+ len = strcspn(verstring, "\015\012");
+ ssh->v_c = snewn(len + 1, char);
+ memcpy(ssh->v_c, verstring, len);
+ ssh->v_c[len] = 0;
+ }
+
+ logeventf(ssh, "We claim version: %.*s",
+ strcspn(verstring, "\015\012"), verstring);
+ s_write(ssh, verstring, strlen(verstring));
+ sfree(verstring);
+}
+
+static int do_ssh_init(Ssh ssh, unsigned char c)
+{
+ struct do_ssh_init_state {
+ int crLine;
+ int vslen;
+ char version[10];
+ char *vstring;
+ int vstrsize;
+ int i;
+ int proto1, proto2;
+ };
+ crState(do_ssh_init_state);
+
+ crBeginState;
+
+ /* Search for a line beginning with the string "SSH-" in the input. */
+ for (;;) {
+ if (c != 'S') goto no;
+ crReturn(1);
+ if (c != 'S') goto no;
+ crReturn(1);
+ if (c != 'H') goto no;
+ crReturn(1);
+ if (c != '-') goto no;
+ break;
+ no:
+ while (c != '\012')
+ crReturn(1);
+ crReturn(1);
+ }
+
+ s->vstrsize = 16;
+ s->vstring = snewn(s->vstrsize, char);
+ strcpy(s->vstring, "SSH-");
+ s->vslen = 4;
+ s->i = 0;
while (1) {
crReturn(1); /* get another char */
- if (vslen >= vstrsize - 1) {
- vstrsize += 16;
- vstring = srealloc(vstring, vstrsize);
+ if (s->vslen >= s->vstrsize - 1) {
+ s->vstrsize += 16;
+ s->vstring = sresize(s->vstring, s->vstrsize, char);
}
- vstring[vslen++] = c;
- if (i >= 0) {
+ s->vstring[s->vslen++] = c;
+ if (s->i >= 0) {
if (c == '-') {
- version[i] = '\0';
- i = -1;
- } else if (i < sizeof(version) - 1)
- version[i++] = c;
- } else if (c == '\n')
+ s->version[s->i] = '\0';
+ s->i = -1;
+ } else if (s->i < sizeof(s->version) - 1)
+ s->version[s->i++] = c;
+ } else if (c == '\012')
break;
}
- ssh_agentfwd_enabled = FALSE;
- rdpkt2_state.incoming_sequence = 0;
+ ssh->agentfwd_enabled = FALSE;
+ ssh->rdpkt2_state.incoming_sequence = 0;
- vstring[vslen] = 0;
- vlog = smalloc(20 + vslen);
- vstring[strcspn (vstring, "\r\n")] = '\0'; /* remove end-of-line chars */
- sprintf(vlog, "Server version: %s", vstring);
- logevent(vlog);
- ssh_detect_bugs(vstring);
- sfree(vlog);
+ s->vstring[s->vslen] = 0;
+ s->vstring[strcspn(s->vstring, "\015\012")] = '\0';/* remove EOL chars */
+ logeventf(ssh, "Server version: %s", s->vstring);
+ ssh_detect_bugs(ssh, s->vstring);
/*
* Decide which SSH protocol version to support.
*/
/* Anything strictly below "2.0" means protocol 1 is supported. */
- proto1 = ssh_versioncmp(version, "2.0") < 0;
+ s->proto1 = ssh_versioncmp(s->version, "2.0") < 0;
/* Anything greater or equal to "1.99" means protocol 2 is supported. */
- proto2 = ssh_versioncmp(version, "1.99") >= 0;
+ s->proto2 = ssh_versioncmp(s->version, "1.99") >= 0;
- if (cfg.sshprot == 0 && !proto1) {
+ if (conf_get_int(ssh->conf, CONF_sshprot) == 0 && !s->proto1) {
bombout(("SSH protocol version 1 required by user but not provided by server"));
- crReturn(0);
+ crStop(0);
}
- if (cfg.sshprot == 3 && !proto2) {
+ if (conf_get_int(ssh->conf, CONF_sshprot) == 3 && !s->proto2) {
bombout(("SSH protocol version 2 required by user but not provided by server"));
- crReturn(0);
+ crStop(0);
}
- if (proto2 && (cfg.sshprot >= 2 || !proto1)) {
+ if (s->proto2 && (conf_get_int(ssh->conf, CONF_sshprot) >= 2 || !s->proto1))
+ ssh->version = 2;
+ else
+ ssh->version = 1;
+
+ logeventf(ssh, "Using SSH protocol version %d", ssh->version);
+
+ /* Send the version string, if we haven't already */
+ if (conf_get_int(ssh->conf, CONF_sshprot) != 3)
+ ssh_send_verstring(ssh, s->version);
+
+ if (ssh->version == 2) {
+ size_t len;
/*
- * Use v2 protocol.
+ * Record their version string.
*/
- char verstring[80], vlog[100];
- sprintf(verstring, "SSH-2.0-%s", sshver);
- SHA_Init(&exhashbase);
+ len = strcspn(s->vstring, "\015\012");
+ ssh->v_s = snewn(len + 1, char);
+ memcpy(ssh->v_s, s->vstring, len);
+ ssh->v_s[len] = 0;
+
/*
- * Hash our version string and their version string.
+ * Initialise SSH-2 protocol.
*/
- sha_string(&exhashbase, verstring, strlen(verstring));
- sha_string(&exhashbase, vstring, strcspn(vstring, "\r\n"));
- sprintf(vlog, "We claim version: %s", verstring);
- logevent(vlog);
- strcat(verstring, "\n");
- logevent("Using SSH protocol version 2");
- sk_write(s, verstring, strlen(verstring));
- ssh_protocol = ssh2_protocol;
- ssh_version = 2;
- s_rdpkt = ssh2_rdpkt;
+ ssh->protocol = ssh2_protocol;
+ ssh2_protocol_setup(ssh);
+ ssh->s_rdpkt = ssh2_rdpkt;
} else {
/*
- * Use v1 protocol.
+ * Initialise SSH-1 protocol.
*/
- char verstring[80], vlog[100];
- sprintf(verstring, "SSH-%s-%s",
- (ssh_versioncmp(version, "1.5") <= 0 ? version : "1.5"),
- sshver);
- sprintf(vlog, "We claim version: %s", verstring);
- logevent(vlog);
- strcat(verstring, "\n");
-
- logevent("Using SSH protocol version 1");
- sk_write(s, verstring, strlen(verstring));
- ssh_protocol = ssh1_protocol;
- ssh_version = 1;
- s_rdpkt = ssh1_rdpkt;
+ ssh->protocol = ssh1_protocol;
+ ssh1_protocol_setup(ssh);
+ ssh->s_rdpkt = ssh1_rdpkt;
}
- ssh_state = SSH_STATE_BEFORE_SIZE;
+ if (ssh->version == 2)
+ do_ssh2_transport(ssh, NULL, -1, NULL);
- sfree(vstring);
+ update_specials_menu(ssh->frontend);
+ ssh->state = SSH_STATE_BEFORE_SIZE;
+ ssh->pinger = pinger_new(ssh->conf, &ssh_backend, ssh);
+
+ sfree(s->vstring);
crFinish(0);
}
-static void ssh_gotdata(unsigned char *data, int datalen)
+static void ssh_process_incoming_data(Ssh ssh,
+ unsigned char **data, int *datalen)
{
- crBegin;
+ struct Packet *pktin;
- /*
- * To begin with, feed the characters one by one to the
- * protocol initialisation / selection function do_ssh_init().
- * When that returns 0, we're done with the initial greeting
- * exchange and can move on to packet discipline.
+ pktin = ssh->s_rdpkt(ssh, data, datalen);
+ if (pktin) {
+ ssh->protocol(ssh, NULL, 0, pktin);
+ ssh_free_packet(pktin);
+ }
+}
+
+static void ssh_queue_incoming_data(Ssh ssh,
+ unsigned char **data, int *datalen)
+{
+ bufchain_add(&ssh->queued_incoming_data, *data, *datalen);
+ *data += *datalen;
+ *datalen = 0;
+}
+
+static void ssh_process_queued_incoming_data(Ssh ssh)
+{
+ void *vdata;
+ unsigned char *data;
+ int len, origlen;
+
+ while (!ssh->frozen && bufchain_size(&ssh->queued_incoming_data)) {
+ bufchain_prefix(&ssh->queued_incoming_data, &vdata, &len);
+ data = vdata;
+ origlen = len;
+
+ while (!ssh->frozen && len > 0)
+ ssh_process_incoming_data(ssh, &data, &len);
+
+ if (origlen > len)
+ bufchain_consume(&ssh->queued_incoming_data, origlen - len);
+ }
+}
+
+static void ssh_set_frozen(Ssh ssh, int frozen)
+{
+ if (ssh->s)
+ sk_set_frozen(ssh->s, frozen);
+ ssh->frozen = frozen;
+}
+
+static void ssh_gotdata(Ssh ssh, unsigned char *data, int datalen)
+{
+ /* Log raw data, if we're in that mode. */
+ if (ssh->logctx)
+ log_packet(ssh->logctx, PKT_INCOMING, -1, NULL, data, datalen,
+ 0, NULL, NULL);
+
+ crBegin(ssh->ssh_gotdata_crstate);
+
+ /*
+ * To begin with, feed the characters one by one to the
+ * protocol initialisation / selection function do_ssh_init().
+ * When that returns 0, we're done with the initial greeting
+ * exchange and can move on to packet discipline.
*/
while (1) {
- int ret;
+ int ret; /* need not be kept across crReturn */
if (datalen == 0)
crReturnV; /* more data please */
- ret = do_ssh_init(*data);
+ ret = do_ssh_init(ssh, *data);
data++;
datalen--;
if (ret == 0)
* everything to s_rdpkt, and then pass the resulting packets
* to the proper protocol handler.
*/
- if (datalen == 0)
- crReturnV;
+
while (1) {
- while (datalen > 0) {
- if (s_rdpkt(&data, &datalen) == 0) {
- if (ssh_state == SSH_STATE_CLOSED) {
- return;
- }
- ssh_protocol(NULL, 0, 1);
- if (ssh_state == SSH_STATE_CLOSED) {
- return;
- }
+ while (bufchain_size(&ssh->queued_incoming_data) > 0 || datalen > 0) {
+ if (ssh->frozen) {
+ ssh_queue_incoming_data(ssh, &data, &datalen);
+ /* This uses up all data and cannot cause anything interesting
+ * to happen; indeed, for anything to happen at all, we must
+ * return, so break out. */
+ break;
+ } else if (bufchain_size(&ssh->queued_incoming_data) > 0) {
+ /* This uses up some or all data, and may freeze the
+ * session. */
+ ssh_process_queued_incoming_data(ssh);
+ } else {
+ /* This uses up some or all data, and may freeze the
+ * session. */
+ ssh_process_incoming_data(ssh, &data, &datalen);
}
+ /* FIXME this is probably EBW. */
+ if (ssh->state == SSH_STATE_CLOSED)
+ return;
}
+ /* We're out of data. Go and get some more. */
crReturnV;
}
crFinishV;
}
-static int ssh_closing(Plug plug, char *error_msg, int error_code,
+static int ssh_do_close(Ssh ssh, int notify_exit)
+{
+ int ret = 0;
+ struct ssh_channel *c;
+
+ ssh->state = SSH_STATE_CLOSED;
+ expire_timer_context(ssh);
+ if (ssh->s) {
+ sk_close(ssh->s);
+ ssh->s = NULL;
+ if (notify_exit)
+ notify_remote_exit(ssh->frontend);
+ else
+ ret = 1;
+ }
+ /*
+ * Now we must shut down any port- and X-forwarded channels going
+ * through this connection.
+ */
+ if (ssh->channels) {
+ while (NULL != (c = index234(ssh->channels, 0))) {
+ switch (c->type) {
+ case CHAN_X11:
+ x11_close(c->u.x11.s);
+ break;
+ case CHAN_SOCKDATA:
+ case CHAN_SOCKDATA_DORMANT:
+ pfd_close(c->u.pfd.s);
+ break;
+ }
+ del234(ssh->channels, c); /* moving next one to index 0 */
+ if (ssh->version == 2)
+ bufchain_clear(&c->v.v2.outbuffer);
+ sfree(c);
+ }
+ }
+ /*
+ * Go through port-forwardings, and close any associated
+ * listening sockets.
+ */
+ if (ssh->portfwds) {
+ struct ssh_portfwd *pf;
+ while (NULL != (pf = index234(ssh->portfwds, 0))) {
+ /* Dispose of any listening socket. */
+ if (pf->local)
+ pfd_terminate(pf->local);
+ del234(ssh->portfwds, pf); /* moving next one to index 0 */
+ free_portfwd(pf);
+ }
+ freetree234(ssh->portfwds);
+ ssh->portfwds = NULL;
+ }
+
+ return ret;
+}
+
+static void ssh_log(Plug plug, int type, SockAddr addr, int port,
+ const char *error_msg, int error_code)
+{
+ Ssh ssh = (Ssh) plug;
+ char addrbuf[256], *msg;
+
+ sk_getaddr(addr, addrbuf, lenof(addrbuf));
+
+ if (type == 0)
+ msg = dupprintf("Connecting to %s port %d", addrbuf, port);
+ else
+ msg = dupprintf("Failed to connect to %s: %s", addrbuf, error_msg);
+
+ logevent(msg);
+ sfree(msg);
+}
+
+static int ssh_closing(Plug plug, const char *error_msg, int error_code,
int calling_back)
{
- ssh_state = SSH_STATE_CLOSED;
- if (s) {
- sk_close(s);
- s = NULL;
+ Ssh ssh = (Ssh) plug;
+ int need_notify = ssh_do_close(ssh, FALSE);
+
+ if (!error_msg) {
+ if (!ssh->close_expected)
+ error_msg = "Server unexpectedly closed network connection";
+ else
+ error_msg = "Server closed network connection";
}
- if (error_msg) {
- /* A socket error has occurred. */
+
+ if (ssh->close_expected && ssh->clean_exit && ssh->exitcode < 0)
+ ssh->exitcode = 0;
+
+ if (need_notify)
+ notify_remote_exit(ssh->frontend);
+
+ if (error_msg)
logevent(error_msg);
- connection_fatal(error_msg);
- } else {
- /* Otherwise, the remote side closed the connection normally. */
- }
+ if (!ssh->close_expected || !ssh->clean_exit)
+ connection_fatal(ssh->frontend, "%s", error_msg);
return 0;
}
static int ssh_receive(Plug plug, int urgent, char *data, int len)
{
- ssh_gotdata(data, len);
- if (ssh_state == SSH_STATE_CLOSED) {
- if (s) {
- sk_close(s);
- s = NULL;
- }
+ Ssh ssh = (Ssh) plug;
+ ssh_gotdata(ssh, (unsigned char *)data, len);
+ if (ssh->state == SSH_STATE_CLOSED) {
+ ssh_do_close(ssh, TRUE);
return 0;
}
return 1;
static void ssh_sent(Plug plug, int bufsize)
{
+ Ssh ssh = (Ssh) plug;
/*
* If the send backlog on the SSH socket itself clears, we
* should unthrottle the whole world if it was throttled.
*/
if (bufsize < SSH_MAX_BACKLOG)
- ssh_throttle_all(0, bufsize);
+ ssh_throttle_all(ssh, 0, bufsize);
}
/*
* Also places the canonical host name into `realhost'. It must be
* freed by the caller.
*/
-static char *connect_to_host(char *host, int port, char **realhost, int nodelay)
+static const char *connect_to_host(Ssh ssh, char *host, int port,
+ char **realhost, int nodelay, int keepalive)
{
- static struct plug_function_table fn_table = {
+ static const struct plug_function_table fn_table = {
+ ssh_log,
ssh_closing,
ssh_receive,
ssh_sent,
NULL
- }, *fn_table_ptr = &fn_table;
+ };
SockAddr addr;
- char *err;
-#ifdef FWHACK
- char *FWhost;
- int FWport;
-#endif
-
- savedhost = smalloc(1 + strlen(host));
- if (!savedhost)
- fatalbox("Out of memory");
- strcpy(savedhost, host);
+ const char *err;
+ char *loghost;
+ int addressfamily, sshprot;
+
+ loghost = conf_get_str(ssh->conf, CONF_loghost);
+ if (*loghost) {
+ char *colon;
- if (port < 0)
- port = 22; /* default ssh port */
- savedport = port;
+ ssh->savedhost = dupstr(loghost);
+ ssh->savedport = 22; /* default ssh port */
-#ifdef FWHACK
- FWhost = host;
- FWport = port;
- host = FWSTR;
- port = 23;
-#endif
+ /*
+ * A colon suffix on savedhost also lets us affect
+ * savedport.
+ *
+ * (FIXME: do something about IPv6 address literals here.)
+ */
+ colon = strrchr(ssh->savedhost, ':');
+ if (colon) {
+ *colon++ = '\0';
+ if (*colon)
+ ssh->savedport = atoi(colon);
+ }
+ } else {
+ ssh->savedhost = dupstr(host);
+ if (port < 0)
+ port = 22; /* default ssh port */
+ ssh->savedport = port;
+ }
/*
* Try to find host.
*/
- {
- char buf[200];
- sprintf(buf, "Looking up host \"%.170s\"", host);
- logevent(buf);
- }
- addr = sk_namelookup(host, realhost);
- if ((err = sk_addr_error(addr)))
+ addressfamily = conf_get_int(ssh->conf, CONF_addressfamily);
+ logeventf(ssh, "Looking up host \"%s\"%s", host,
+ (addressfamily == ADDRTYPE_IPV4 ? " (IPv4)" :
+ (addressfamily == ADDRTYPE_IPV6 ? " (IPv6)" : "")));
+ addr = name_lookup(host, port, realhost, ssh->conf, addressfamily);
+ if ((err = sk_addr_error(addr)) != NULL) {
+ sk_addr_free(addr);
return err;
-
-#ifdef FWHACK
- *realhost = strdup(FWhost);
-#endif
+ }
+ ssh->fullhostname = dupstr(*realhost); /* save in case of GSSAPI */
/*
* Open socket.
*/
- {
- char buf[200], addrbuf[100];
- sk_getaddr(addr, addrbuf, 100);
- sprintf(buf, "Connecting to %.100s port %d", addrbuf, port);
- logevent(buf);
- }
- s = new_connection(addr, *realhost, port, 0, 1, nodelay, &fn_table_ptr);
- if ((err = sk_socket_error(s))) {
- s = NULL;
+ ssh->fn = &fn_table;
+ ssh->s = new_connection(addr, *realhost, port,
+ 0, 1, nodelay, keepalive, (Plug) ssh, ssh->conf);
+ if ((err = sk_socket_error(ssh->s)) != NULL) {
+ ssh->s = NULL;
+ notify_remote_exit(ssh->frontend);
return err;
}
-#ifdef FWHACK
- sk_write(s, "connect ", 8);
- sk_write(s, FWhost, strlen(FWhost));
- {
- char buf[20];
- sprintf(buf, " %d\n", FWport);
- sk_write(s, buf, strlen(buf));
+ /*
+ * If the SSH version number's fixed, set it now, and if it's SSH-2,
+ * send the version string too.
+ */
+ sshprot = conf_get_int(ssh->conf, CONF_sshprot);
+ if (sshprot == 0)
+ ssh->version = 1;
+ if (sshprot == 3) {
+ ssh->version = 2;
+ ssh_send_verstring(ssh, NULL);
+ }
+
+ /*
+ * loghost, if configured, overrides realhost.
+ */
+ if (*loghost) {
+ sfree(*realhost);
+ *realhost = dupstr(loghost);
}
-#endif
return NULL;
}
/*
* Throttle or unthrottle the SSH connection.
*/
-static void ssh1_throttle(int adjust)
+static void ssh_throttle_conn(Ssh ssh, int adjust)
{
- int old_count = ssh1_throttle_count;
- ssh1_throttle_count += adjust;
- assert(ssh1_throttle_count >= 0);
- if (ssh1_throttle_count && !old_count) {
- sk_set_frozen(s, 1);
- } else if (!ssh1_throttle_count && old_count) {
- sk_set_frozen(s, 0);
+ int old_count = ssh->conn_throttle_count;
+ ssh->conn_throttle_count += adjust;
+ assert(ssh->conn_throttle_count >= 0);
+ if (ssh->conn_throttle_count && !old_count) {
+ ssh_set_frozen(ssh, 1);
+ } else if (!ssh->conn_throttle_count && old_count) {
+ ssh_set_frozen(ssh, 0);
}
}
* Throttle or unthrottle _all_ local data streams (for when sends
* on the SSH connection itself back up).
*/
-static void ssh_throttle_all(int enable, int bufsize)
+static void ssh_throttle_all(Ssh ssh, int enable, int bufsize)
{
int i;
struct ssh_channel *c;
- if (enable == ssh_throttled_all)
+ if (enable == ssh->throttled_all)
return;
- ssh_throttled_all = enable;
- ssh_overall_bufsize = bufsize;
- if (!ssh_channels)
+ ssh->throttled_all = enable;
+ ssh->overall_bufsize = bufsize;
+ if (!ssh->channels)
return;
- for (i = 0; NULL != (c = index234(ssh_channels, i)); i++) {
+ for (i = 0; NULL != (c = index234(ssh->channels, i)); i++) {
switch (c->type) {
case CHAN_MAINSESSION:
/*
/* Agent channels require no buffer management. */
break;
case CHAN_SOCKDATA:
- pfd_override_throttle(c->u.x11.s, enable);
+ pfd_override_throttle(c->u.pfd.s, enable);
break;
}
}
}
-/*
- * Username and password input, abstracted off into reusable
- * routines (hopefully even reusable between SSH1 and SSH2!).
- */
-static char *ssh_userpass_input_buffer;
-static int ssh_userpass_input_buflen;
-static int ssh_userpass_input_bufpos;
-static int ssh_userpass_input_echo;
+static void ssh_agent_callback(void *sshv, void *reply, int replylen)
+{
+ Ssh ssh = (Ssh) sshv;
+
+ ssh->agent_response = reply;
+ ssh->agent_response_len = replylen;
+
+ if (ssh->version == 1)
+ do_ssh1_login(ssh, NULL, -1, NULL);
+ else
+ do_ssh2_authconn(ssh, NULL, -1, NULL);
+}
+
+static void ssh_dialog_callback(void *sshv, int ret)
+{
+ Ssh ssh = (Ssh) sshv;
+
+ ssh->user_response = ret;
+
+ if (ssh->version == 1)
+ do_ssh1_login(ssh, NULL, -1, NULL);
+ else
+ do_ssh2_transport(ssh, NULL, -1, NULL);
+
+ /*
+ * This may have unfrozen the SSH connection, so do a
+ * queued-data run.
+ */
+ ssh_process_queued_incoming_data(ssh);
+}
-/* Set up a username or password input loop on a given buffer. */
-void setup_userpass_input(char *buffer, int buflen, int echo)
+static void ssh_agentf_callback(void *cv, void *reply, int replylen)
{
- ssh_userpass_input_buffer = buffer;
- ssh_userpass_input_buflen = buflen;
- ssh_userpass_input_bufpos = 0;
- ssh_userpass_input_echo = echo;
+ struct ssh_channel *c = (struct ssh_channel *)cv;
+ Ssh ssh = c->ssh;
+ void *sentreply = reply;
+
+ c->u.a.outstanding_requests--;
+ if (!sentreply) {
+ /* Fake SSH_AGENT_FAILURE. */
+ sentreply = "\0\0\0\1\5";
+ replylen = 5;
+ }
+ if (ssh->version == 2) {
+ ssh2_add_channel_data(c, sentreply, replylen);
+ ssh2_try_send(c);
+ } else {
+ send_packet(ssh, SSH1_MSG_CHANNEL_DATA,
+ PKT_INT, c->remoteid,
+ PKT_INT, replylen,
+ PKTT_DATA,
+ PKT_DATA, sentreply, replylen,
+ PKTT_OTHER,
+ PKT_END);
+ }
+ if (reply)
+ sfree(reply);
+ /*
+ * If we've already seen an incoming EOF but haven't sent an
+ * outgoing one, this may be the moment to send it.
+ */
+ if (c->u.a.outstanding_requests == 0 && (c->closes & CLOSES_RCVD_EOF))
+ sshfwd_write_eof(c);
}
/*
- * Process some terminal data in the course of username/password
- * input. Returns >0 for success (line of input returned in
- * buffer), <0 for failure (user hit ^C/^D, bomb out and exit), 0
- * for inconclusive (keep waiting for more input please).
+ * Client-initiated disconnection. Send a DISCONNECT if `wire_reason'
+ * non-NULL, otherwise just close the connection. `client_reason' == NULL
+ * => log `wire_reason'.
*/
-int process_userpass_input(unsigned char *in, int inlen)
+static void ssh_disconnect(Ssh ssh, char *client_reason, char *wire_reason,
+ int code, int clean_exit)
{
- char c;
-
- while (inlen--) {
- switch (c = *in++) {
- case 10:
- case 13:
- ssh_userpass_input_buffer[ssh_userpass_input_bufpos] = 0;
- ssh_userpass_input_buffer[ssh_userpass_input_buflen-1] = 0;
- return +1;
- break;
- case 8:
- case 127:
- if (ssh_userpass_input_bufpos > 0) {
- if (ssh_userpass_input_echo)
- c_write_str("\b \b");
- ssh_userpass_input_bufpos--;
- }
- break;
- case 21:
- case 27:
- while (ssh_userpass_input_bufpos > 0) {
- if (ssh_userpass_input_echo)
- c_write_str("\b \b");
- ssh_userpass_input_bufpos--;
- }
- break;
- case 3:
- case 4:
- return -1;
- break;
- default:
- if (((c >= ' ' && c <= '~') ||
- ((unsigned char) c >= 160))
- && ssh_userpass_input_bufpos < ssh_userpass_input_buflen-1) {
- ssh_userpass_input_buffer[ssh_userpass_input_bufpos++] = c;
- if (ssh_userpass_input_echo)
- c_write(&c, 1);
- }
- break;
+ char *error;
+ if (!client_reason)
+ client_reason = wire_reason;
+ if (client_reason)
+ error = dupprintf("Disconnected: %s", client_reason);
+ else
+ error = dupstr("Disconnected");
+ if (wire_reason) {
+ if (ssh->version == 1) {
+ send_packet(ssh, SSH1_MSG_DISCONNECT, PKT_STR, wire_reason,
+ PKT_END);
+ } else if (ssh->version == 2) {
+ struct Packet *pktout = ssh2_pkt_init(SSH2_MSG_DISCONNECT);
+ ssh2_pkt_adduint32(pktout, code);
+ ssh2_pkt_addstring(pktout, wire_reason);
+ ssh2_pkt_addstring(pktout, "en"); /* language tag */
+ ssh2_pkt_send_noqueue(ssh, pktout);
}
}
- return 0;
+ ssh->close_expected = TRUE;
+ ssh->clean_exit = clean_exit;
+ ssh_closing((Plug)ssh, error, 0, 0);
+ sfree(error);
}
/*
* Handle the key exchange and user authentication phases.
*/
-static int do_ssh1_login(unsigned char *in, int inlen, int ispkt)
+static int do_ssh1_login(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin)
{
- int i, j;
- static int len;
- static unsigned char *rsabuf, *keystr1, *keystr2;
- unsigned char cookie[8];
- struct RSAKey servkey, hostkey;
+ int i, j, ret;
+ unsigned char cookie[8], *ptr;
struct MD5Context md5c;
- static unsigned long supported_ciphers_mask, supported_auths_mask;
- static int tried_publickey, tried_agent;
- static int tis_auth_refused, ccard_auth_refused;
- static unsigned char session_id[16];
- static int cipher_type;
- static char username[100];
- static void *publickey_blob;
- int publickey_bloblen;
-
- crBegin;
-
- if (!ispkt)
- crWaitUntil(ispkt);
-
- if (pktin.type != SSH1_SMSG_PUBLIC_KEY) {
+ struct do_ssh1_login_state {
+ int crLine;
+ int len;
+ unsigned char *rsabuf, *keystr1, *keystr2;
+ unsigned long supported_ciphers_mask, supported_auths_mask;
+ int tried_publickey, tried_agent;
+ int tis_auth_refused, ccard_auth_refused;
+ unsigned char session_id[16];
+ int cipher_type;
+ void *publickey_blob;
+ int publickey_bloblen;
+ char *publickey_comment;
+ int publickey_encrypted;
+ prompts_t *cur_prompt;
+ char c;
+ int pwpkt_type;
+ unsigned char request[5], *response, *p;
+ int responselen;
+ int keyi, nkeys;
+ int authed;
+ struct RSAKey key;
+ Bignum challenge;
+ char *commentp;
+ int commentlen;
+ int dlgret;
+ Filename *keyfile;
+ struct RSAKey servkey, hostkey;
+ };
+ crState(do_ssh1_login_state);
+
+ crBeginState;
+
+ if (!pktin)
+ crWaitUntil(pktin);
+
+ if (pktin->type != SSH1_SMSG_PUBLIC_KEY) {
bombout(("Public key packet not received"));
- crReturn(0);
+ crStop(0);
}
logevent("Received public keys");
- memcpy(cookie, pktin.body, 8);
+ ptr = ssh_pkt_getdata(pktin, 8);
+ if (!ptr) {
+ bombout(("SSH-1 public key packet stopped before random cookie"));
+ crStop(0);
+ }
+ memcpy(cookie, ptr, 8);
- i = makekey(pktin.body + 8, &servkey, &keystr1, 0);
- j = makekey(pktin.body + 8 + i, &hostkey, &keystr2, 0);
+ if (!ssh1_pkt_getrsakey(pktin, &s->servkey, &s->keystr1) ||
+ !ssh1_pkt_getrsakey(pktin, &s->hostkey, &s->keystr2)) {
+ bombout(("Failed to read SSH-1 public keys from public key packet"));
+ crStop(0);
+ }
/*
* Log the host key fingerprint.
char logmsg[80];
logevent("Host key fingerprint is:");
strcpy(logmsg, " ");
- hostkey.comment = NULL;
+ s->hostkey.comment = NULL;
rsa_fingerprint(logmsg + strlen(logmsg),
- sizeof(logmsg) - strlen(logmsg), &hostkey);
+ sizeof(logmsg) - strlen(logmsg), &s->hostkey);
logevent(logmsg);
}
- ssh1_remote_protoflags = GET_32BIT(pktin.body + 8 + i + j);
- supported_ciphers_mask = GET_32BIT(pktin.body + 12 + i + j);
- supported_auths_mask = GET_32BIT(pktin.body + 16 + i + j);
+ ssh->v1_remote_protoflags = ssh_pkt_getuint32(pktin);
+ s->supported_ciphers_mask = ssh_pkt_getuint32(pktin);
+ s->supported_auths_mask = ssh_pkt_getuint32(pktin);
+ if ((ssh->remote_bugs & BUG_CHOKES_ON_RSA))
+ s->supported_auths_mask &= ~(1 << SSH1_AUTH_RSA);
- ssh1_local_protoflags =
- ssh1_remote_protoflags & SSH1_PROTOFLAGS_SUPPORTED;
- ssh1_local_protoflags |= SSH1_PROTOFLAG_SCREEN_NUMBER;
+ ssh->v1_local_protoflags =
+ ssh->v1_remote_protoflags & SSH1_PROTOFLAGS_SUPPORTED;
+ ssh->v1_local_protoflags |= SSH1_PROTOFLAG_SCREEN_NUMBER;
MD5Init(&md5c);
- MD5Update(&md5c, keystr2, hostkey.bytes);
- MD5Update(&md5c, keystr1, servkey.bytes);
- MD5Update(&md5c, pktin.body, 8);
- MD5Final(session_id, &md5c);
+ MD5Update(&md5c, s->keystr2, s->hostkey.bytes);
+ MD5Update(&md5c, s->keystr1, s->servkey.bytes);
+ MD5Update(&md5c, cookie, 8);
+ MD5Final(s->session_id, &md5c);
for (i = 0; i < 32; i++)
- session_key[i] = random_byte();
+ ssh->session_key[i] = random_byte();
+
+ /*
+ * Verify that the `bits' and `bytes' parameters match.
+ */
+ if (s->hostkey.bits > s->hostkey.bytes * 8 ||
+ s->servkey.bits > s->servkey.bytes * 8) {
+ bombout(("SSH-1 public keys were badly formatted"));
+ crStop(0);
+ }
- len = (hostkey.bytes > servkey.bytes ? hostkey.bytes : servkey.bytes);
+ s->len = (s->hostkey.bytes > s->servkey.bytes ?
+ s->hostkey.bytes : s->servkey.bytes);
- rsabuf = smalloc(len);
- if (!rsabuf)
- fatalbox("Out of memory");
+ s->rsabuf = snewn(s->len, unsigned char);
/*
* Verify the host key.
/*
* First format the key into a string.
*/
- int len = rsastr_len(&hostkey);
+ int len = rsastr_len(&s->hostkey);
char fingerprint[100];
- char *keystr = smalloc(len);
- if (!keystr)
- fatalbox("Out of memory");
- rsastr_fmt(keystr, &hostkey);
- rsa_fingerprint(fingerprint, sizeof(fingerprint), &hostkey);
- verify_ssh_host_key(savedhost, savedport, "rsa", keystr,
- fingerprint);
+ char *keystr = snewn(len, char);
+ rsastr_fmt(keystr, &s->hostkey);
+ rsa_fingerprint(fingerprint, sizeof(fingerprint), &s->hostkey);
+
+ ssh_set_frozen(ssh, 1);
+ s->dlgret = verify_ssh_host_key(ssh->frontend,
+ ssh->savedhost, ssh->savedport,
+ "rsa", keystr, fingerprint,
+ ssh_dialog_callback, ssh);
sfree(keystr);
+ if (s->dlgret < 0) {
+ do {
+ crReturn(0);
+ if (pktin) {
+ bombout(("Unexpected data from server while waiting"
+ " for user host key response"));
+ crStop(0);
+ }
+ } while (pktin || inlen > 0);
+ s->dlgret = ssh->user_response;
+ }
+ ssh_set_frozen(ssh, 0);
+
+ if (s->dlgret == 0) {
+ ssh_disconnect(ssh, "User aborted at host key verification",
+ NULL, 0, TRUE);
+ crStop(0);
+ }
}
for (i = 0; i < 32; i++) {
- rsabuf[i] = session_key[i];
+ s->rsabuf[i] = ssh->session_key[i];
if (i < 16)
- rsabuf[i] ^= session_id[i];
+ s->rsabuf[i] ^= s->session_id[i];
}
- if (hostkey.bytes > servkey.bytes) {
- rsaencrypt(rsabuf, 32, &servkey);
- rsaencrypt(rsabuf, servkey.bytes, &hostkey);
+ if (s->hostkey.bytes > s->servkey.bytes) {
+ ret = rsaencrypt(s->rsabuf, 32, &s->servkey);
+ if (ret)
+ ret = rsaencrypt(s->rsabuf, s->servkey.bytes, &s->hostkey);
} else {
- rsaencrypt(rsabuf, 32, &hostkey);
- rsaencrypt(rsabuf, hostkey.bytes, &servkey);
+ ret = rsaencrypt(s->rsabuf, 32, &s->hostkey);
+ if (ret)
+ ret = rsaencrypt(s->rsabuf, s->hostkey.bytes, &s->servkey);
+ }
+ if (!ret) {
+ bombout(("SSH-1 public key encryptions failed due to bad formatting"));
+ crStop(0);
}
logevent("Encrypted session key");
{
int cipher_chosen = 0, warn = 0;
char *cipher_string = NULL;
+ int i;
for (i = 0; !cipher_chosen && i < CIPHER_MAX; i++) {
- int next_cipher = cfg.ssh_cipherlist[i];
+ int next_cipher = conf_get_int_int(ssh->conf,
+ CONF_ssh_cipherlist, i);
if (next_cipher == CIPHER_WARN) {
/* If/when we choose a cipher, warn about it */
warn = 1;
} else if (next_cipher == CIPHER_AES) {
/* XXX Probably don't need to mention this. */
- logevent("AES not supported in SSH1, skipping");
+ logevent("AES not supported in SSH-1, skipping");
} else {
switch (next_cipher) {
- case CIPHER_3DES: cipher_type = SSH_CIPHER_3DES;
+ case CIPHER_3DES: s->cipher_type = SSH_CIPHER_3DES;
cipher_string = "3DES"; break;
- case CIPHER_BLOWFISH: cipher_type = SSH_CIPHER_BLOWFISH;
+ case CIPHER_BLOWFISH: s->cipher_type = SSH_CIPHER_BLOWFISH;
cipher_string = "Blowfish"; break;
- case CIPHER_DES: cipher_type = SSH_CIPHER_DES;
+ case CIPHER_DES: s->cipher_type = SSH_CIPHER_DES;
cipher_string = "single-DES"; break;
}
- if (supported_ciphers_mask & (1 << cipher_type))
+ if (s->supported_ciphers_mask & (1 << s->cipher_type))
cipher_chosen = 1;
}
}
if (!cipher_chosen) {
- if ((supported_ciphers_mask & (1 << SSH_CIPHER_3DES)) == 0)
- bombout(("Server violates SSH 1 protocol by not "
+ if ((s->supported_ciphers_mask & (1 << SSH_CIPHER_3DES)) == 0)
+ bombout(("Server violates SSH-1 protocol by not "
"supporting 3DES encryption"));
else
/* shouldn't happen */
bombout(("No supported ciphers found"));
- crReturn(0);
+ crStop(0);
}
/* Warn about chosen cipher if necessary. */
- if (warn)
- askcipher(cipher_string, 0);
+ if (warn) {
+ ssh_set_frozen(ssh, 1);
+ s->dlgret = askalg(ssh->frontend, "cipher", cipher_string,
+ ssh_dialog_callback, ssh);
+ if (s->dlgret < 0) {
+ do {
+ crReturn(0);
+ if (pktin) {
+ bombout(("Unexpected data from server while waiting"
+ " for user response"));
+ crStop(0);
+ }
+ } while (pktin || inlen > 0);
+ s->dlgret = ssh->user_response;
+ }
+ ssh_set_frozen(ssh, 0);
+ if (s->dlgret == 0) {
+ ssh_disconnect(ssh, "User aborted at cipher warning", NULL,
+ 0, TRUE);
+ crStop(0);
+ }
+ }
}
- switch (cipher_type) {
+ switch (s->cipher_type) {
case SSH_CIPHER_3DES:
logevent("Using 3DES encryption");
break;
break;
}
- send_packet(SSH1_CMSG_SESSION_KEY,
- PKT_CHAR, cipher_type,
+ send_packet(ssh, SSH1_CMSG_SESSION_KEY,
+ PKT_CHAR, s->cipher_type,
PKT_DATA, cookie, 8,
- PKT_CHAR, (len * 8) >> 8, PKT_CHAR, (len * 8) & 0xFF,
- PKT_DATA, rsabuf, len,
- PKT_INT, ssh1_local_protoflags, PKT_END);
+ PKT_CHAR, (s->len * 8) >> 8, PKT_CHAR, (s->len * 8) & 0xFF,
+ PKT_DATA, s->rsabuf, s->len,
+ PKT_INT, ssh->v1_local_protoflags, PKT_END);
logevent("Trying to enable encryption...");
- sfree(rsabuf);
+ sfree(s->rsabuf);
- cipher = cipher_type == SSH_CIPHER_BLOWFISH ? &ssh_blowfish_ssh1 :
- cipher_type == SSH_CIPHER_DES ? &ssh_des : &ssh_3des;
- cipher->sesskey(session_key);
+ ssh->cipher = (s->cipher_type == SSH_CIPHER_BLOWFISH ? &ssh_blowfish_ssh1 :
+ s->cipher_type == SSH_CIPHER_DES ? &ssh_des :
+ &ssh_3des);
+ ssh->v1_cipher_ctx = ssh->cipher->make_context();
+ ssh->cipher->sesskey(ssh->v1_cipher_ctx, ssh->session_key);
+ logeventf(ssh, "Initialised %s encryption", ssh->cipher->text_name);
- crWaitUntil(ispkt);
+ ssh->crcda_ctx = crcda_make_context();
+ logevent("Installing CRC compensation attack detector");
- if (pktin.type != SSH1_SMSG_SUCCESS) {
+ if (s->servkey.modulus) {
+ sfree(s->servkey.modulus);
+ s->servkey.modulus = NULL;
+ }
+ if (s->servkey.exponent) {
+ sfree(s->servkey.exponent);
+ s->servkey.exponent = NULL;
+ }
+ if (s->hostkey.modulus) {
+ sfree(s->hostkey.modulus);
+ s->hostkey.modulus = NULL;
+ }
+ if (s->hostkey.exponent) {
+ sfree(s->hostkey.exponent);
+ s->hostkey.exponent = NULL;
+ }
+ crWaitUntil(pktin);
+
+ if (pktin->type != SSH1_SMSG_SUCCESS) {
bombout(("Encryption not successfully enabled"));
- crReturn(0);
+ crStop(0);
}
logevent("Successfully started encryption");
- fflush(stdout);
+ fflush(stdout); /* FIXME eh? */
{
- if ((flags & FLAG_INTERACTIVE) && !*cfg.username) {
- if (ssh_get_line && !ssh_getline_pw_only) {
- if (!ssh_get_line("login as: ",
- username, sizeof(username), FALSE)) {
- /*
- * get_line failed to get a username.
- * Terminate.
- */
- logevent("No username provided. Abandoning session.");
- ssh_state = SSH_STATE_CLOSED;
- crReturn(1);
- }
- } else {
- static int ret;
- c_write_str("login as: ");
- ssh_send_ok = 1;
-
- setup_userpass_input(username, sizeof(username), 1);
- do {
- crWaitUntil(!ispkt);
- ret = process_userpass_input(in, inlen);
- } while (ret == 0);
- if (ret < 0)
- cleanup_exit(0);
- c_write_str("\r\n");
+ if ((ssh->username = get_remote_username(ssh->conf)) == NULL) {
+ int ret; /* need not be kept over crReturn */
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH login name");
+ add_prompt(s->cur_prompt, dupstr("login as: "), TRUE);
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntil(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
}
- } else {
- strncpy(username, cfg.username, sizeof(username));
- username[sizeof(username)-1] = '\0';
+ if (!ret) {
+ /*
+ * Failed to get a username. Terminate.
+ */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, "No username provided", NULL, 0, TRUE);
+ crStop(0);
+ }
+ ssh->username = dupstr(s->cur_prompt->prompts[0]->result);
+ free_prompts(s->cur_prompt);
}
- send_packet(SSH1_CMSG_USER, PKT_STR, username, PKT_END);
+ send_packet(ssh, SSH1_CMSG_USER, PKT_STR, ssh->username, PKT_END);
{
- char userlog[22 + sizeof(username)];
- sprintf(userlog, "Sent username \"%s\"", username);
+ char *userlog = dupprintf("Sent username \"%s\"", ssh->username);
logevent(userlog);
if (flags & FLAG_INTERACTIVE &&
(!((flags & FLAG_STDERR) && (flags & FLAG_VERBOSE)))) {
- strcat(userlog, "\r\n");
- c_write_str(userlog);
+ c_write_str(ssh, userlog);
+ c_write_str(ssh, "\r\n");
}
+ sfree(userlog);
}
}
- crWaitUntil(ispkt);
+ crWaitUntil(pktin);
- if ((ssh_remote_bugs & BUG_CHOKES_ON_RSA)) {
+ if ((s->supported_auths_mask & (1 << SSH1_AUTH_RSA)) == 0) {
/* We must not attempt PK auth. Pretend we've already tried it. */
- tried_publickey = tried_agent = 1;
+ s->tried_publickey = s->tried_agent = 1;
} else {
- tried_publickey = tried_agent = 0;
+ s->tried_publickey = s->tried_agent = 0;
}
- tis_auth_refused = ccard_auth_refused = 0;
- /* Load the public half of cfg.keyfile so we notice if it's in Pageant */
- if (*cfg.keyfile) {
- if (!rsakey_pubblob(cfg.keyfile, &publickey_blob, &publickey_bloblen))
- publickey_blob = NULL;
+ s->tis_auth_refused = s->ccard_auth_refused = 0;
+ /*
+ * Load the public half of any configured keyfile for later use.
+ */
+ s->keyfile = conf_get_filename(ssh->conf, CONF_keyfile);
+ if (!filename_is_null(s->keyfile)) {
+ int keytype;
+ logeventf(ssh, "Reading private key file \"%.150s\"",
+ filename_to_str(s->keyfile));
+ keytype = key_type(s->keyfile);
+ if (keytype == SSH_KEYTYPE_SSH1) {
+ const char *error;
+ if (rsakey_pubblob(s->keyfile,
+ &s->publickey_blob, &s->publickey_bloblen,
+ &s->publickey_comment, &error)) {
+ s->publickey_encrypted = rsakey_encrypted(s->keyfile,
+ NULL);
+ } else {
+ char *msgbuf;
+ logeventf(ssh, "Unable to load private key (%s)", error);
+ msgbuf = dupprintf("Unable to load private key file "
+ "\"%.150s\" (%s)\r\n",
+ filename_to_str(s->keyfile),
+ error);
+ c_write_str(ssh, msgbuf);
+ sfree(msgbuf);
+ s->publickey_blob = NULL;
+ }
+ } else {
+ char *msgbuf;
+ logeventf(ssh, "Unable to use this key file (%s)",
+ key_type_to_str(keytype));
+ msgbuf = dupprintf("Unable to use key file \"%.150s\""
+ " (%s)\r\n",
+ filename_to_str(s->keyfile),
+ key_type_to_str(keytype));
+ c_write_str(ssh, msgbuf);
+ sfree(msgbuf);
+ s->publickey_blob = NULL;
+ }
} else
- publickey_blob = NULL;
+ s->publickey_blob = NULL;
- while (pktin.type == SSH1_SMSG_FAILURE) {
- static char password[100];
- static char prompt[200];
- static int pos;
- static char c;
- static int pwpkt_type;
- pwpkt_type = SSH1_CMSG_AUTH_PASSWORD;
+ while (pktin->type == SSH1_SMSG_FAILURE) {
+ s->pwpkt_type = SSH1_CMSG_AUTH_PASSWORD;
- if (agent_exists() && !tried_agent) {
+ if (conf_get_int(ssh->conf, CONF_tryagent) && agent_exists() && !s->tried_agent) {
/*
* Attempt RSA authentication using Pageant.
*/
- static unsigned char request[5], *response, *p;
- static int responselen;
- static int i, nkeys;
- static int authed = FALSE;
void *r;
- tried_agent = 1;
+ s->authed = FALSE;
+ s->tried_agent = 1;
logevent("Pageant is running. Requesting keys.");
/* Request the keys held by the agent. */
- PUT_32BIT(request, 1);
- request[4] = SSH1_AGENTC_REQUEST_RSA_IDENTITIES;
- agent_query(request, 5, &r, &responselen);
- response = (unsigned char *) r;
- if (response && responselen >= 5 &&
- response[4] == SSH1_AGENT_RSA_IDENTITIES_ANSWER) {
- p = response + 5;
- nkeys = GET_32BIT(p);
- p += 4;
- {
- char buf[64];
- sprintf(buf, "Pageant has %d SSH1 keys", nkeys);
- logevent(buf);
- }
- for (i = 0; i < nkeys; i++) {
- static struct RSAKey key;
- static Bignum challenge;
- static char *commentp;
- static int commentlen;
-
+ PUT_32BIT(s->request, 1);
+ s->request[4] = SSH1_AGENTC_REQUEST_RSA_IDENTITIES;
+ if (!agent_query(s->request, 5, &r, &s->responselen,
+ ssh_agent_callback, ssh)) {
+ do {
+ crReturn(0);
+ if (pktin) {
+ bombout(("Unexpected data from server while waiting"
+ " for agent response"));
+ crStop(0);
+ }
+ } while (pktin || inlen > 0);
+ r = ssh->agent_response;
+ s->responselen = ssh->agent_response_len;
+ }
+ s->response = (unsigned char *) r;
+ if (s->response && s->responselen >= 5 &&
+ s->response[4] == SSH1_AGENT_RSA_IDENTITIES_ANSWER) {
+ s->p = s->response + 5;
+ s->nkeys = toint(GET_32BIT(s->p));
+ if (s->nkeys < 0) {
+ logeventf(ssh, "Pageant reported negative key count %d",
+ s->nkeys);
+ s->nkeys = 0;
+ }
+ s->p += 4;
+ logeventf(ssh, "Pageant has %d SSH-1 keys", s->nkeys);
+ for (s->keyi = 0; s->keyi < s->nkeys; s->keyi++) {
+ unsigned char *pkblob = s->p;
+ s->p += 4;
{
- char buf[64];
- sprintf(buf, "Trying Pageant key #%d", i);
- logevent(buf);
+ int n, ok = FALSE;
+ do { /* do while (0) to make breaking easy */
+ n = ssh1_read_bignum
+ (s->p, toint(s->responselen-(s->p-s->response)),
+ &s->key.exponent);
+ if (n < 0)
+ break;
+ s->p += n;
+ n = ssh1_read_bignum
+ (s->p, toint(s->responselen-(s->p-s->response)),
+ &s->key.modulus);
+ if (n < 0)
+ break;
+ s->p += n;
+ if (s->responselen - (s->p-s->response) < 4)
+ break;
+ s->commentlen = toint(GET_32BIT(s->p));
+ s->p += 4;
+ if (s->commentlen < 0 ||
+ toint(s->responselen - (s->p-s->response)) <
+ s->commentlen)
+ break;
+ s->commentp = (char *)s->p;
+ s->p += s->commentlen;
+ ok = TRUE;
+ } while (0);
+ if (!ok) {
+ logevent("Pageant key list packet was truncated");
+ break;
+ }
}
- if (publickey_blob &&
- !memcmp(p, publickey_blob, publickey_bloblen)) {
- logevent("This key matches configured key file");
- tried_publickey = 1;
+ if (s->publickey_blob) {
+ if (!memcmp(pkblob, s->publickey_blob,
+ s->publickey_bloblen)) {
+ logeventf(ssh, "Pageant key #%d matches "
+ "configured key file", s->keyi);
+ s->tried_publickey = 1;
+ } else
+ /* Skip non-configured key */
+ continue;
}
- p += 4;
- p += ssh1_read_bignum(p, &key.exponent);
- p += ssh1_read_bignum(p, &key.modulus);
- commentlen = GET_32BIT(p);
- p += 4;
- commentp = p;
- p += commentlen;
- send_packet(SSH1_CMSG_AUTH_RSA,
- PKT_BIGNUM, key.modulus, PKT_END);
- crWaitUntil(ispkt);
- if (pktin.type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
+ logeventf(ssh, "Trying Pageant key #%d", s->keyi);
+ send_packet(ssh, SSH1_CMSG_AUTH_RSA,
+ PKT_BIGNUM, s->key.modulus, PKT_END);
+ crWaitUntil(pktin);
+ if (pktin->type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
logevent("Key refused");
continue;
}
logevent("Received RSA challenge");
- ssh1_read_bignum(pktin.body, &challenge);
+ if ((s->challenge = ssh1_pkt_getmp(pktin)) == NULL) {
+ bombout(("Server's RSA challenge was badly formatted"));
+ crStop(0);
+ }
+
{
char *agentreq, *q, *ret;
void *vret;
int len, retlen;
len = 1 + 4; /* message type, bit count */
- len += ssh1_bignum_length(key.exponent);
- len += ssh1_bignum_length(key.modulus);
- len += ssh1_bignum_length(challenge);
+ len += ssh1_bignum_length(s->key.exponent);
+ len += ssh1_bignum_length(s->key.modulus);
+ len += ssh1_bignum_length(s->challenge);
len += 16; /* session id */
len += 4; /* response format */
- agentreq = smalloc(4 + len);
+ agentreq = snewn(4 + len, char);
PUT_32BIT(agentreq, len);
q = agentreq + 4;
*q++ = SSH1_AGENTC_RSA_CHALLENGE;
- PUT_32BIT(q, bignum_bitcount(key.modulus));
+ PUT_32BIT(q, bignum_bitcount(s->key.modulus));
q += 4;
- q += ssh1_write_bignum(q, key.exponent);
- q += ssh1_write_bignum(q, key.modulus);
- q += ssh1_write_bignum(q, challenge);
- memcpy(q, session_id, 16);
+ q += ssh1_write_bignum(q, s->key.exponent);
+ q += ssh1_write_bignum(q, s->key.modulus);
+ q += ssh1_write_bignum(q, s->challenge);
+ memcpy(q, s->session_id, 16);
q += 16;
PUT_32BIT(q, 1); /* response format */
- agent_query(agentreq, len + 4, &vret, &retlen);
+ if (!agent_query(agentreq, len + 4, &vret, &retlen,
+ ssh_agent_callback, ssh)) {
+ sfree(agentreq);
+ do {
+ crReturn(0);
+ if (pktin) {
+ bombout(("Unexpected data from server"
+ " while waiting for agent"
+ " response"));
+ crStop(0);
+ }
+ } while (pktin || inlen > 0);
+ vret = ssh->agent_response;
+ retlen = ssh->agent_response_len;
+ } else
+ sfree(agentreq);
ret = vret;
- sfree(agentreq);
if (ret) {
if (ret[4] == SSH1_AGENT_RSA_RESPONSE) {
logevent("Sending Pageant's response");
- send_packet(SSH1_CMSG_AUTH_RSA_RESPONSE,
+ send_packet(ssh, SSH1_CMSG_AUTH_RSA_RESPONSE,
PKT_DATA, ret + 5, 16,
PKT_END);
sfree(ret);
- crWaitUntil(ispkt);
- if (pktin.type == SSH1_SMSG_SUCCESS) {
+ crWaitUntil(pktin);
+ if (pktin->type == SSH1_SMSG_SUCCESS) {
logevent
("Pageant's response accepted");
if (flags & FLAG_VERBOSE) {
- c_write_str
- ("Authenticated using RSA key \"");
- c_write(commentp, commentlen);
- c_write_str("\" from agent\r\n");
+ c_write_str(ssh, "Authenticated using"
+ " RSA key \"");
+ c_write(ssh, s->commentp,
+ s->commentlen);
+ c_write_str(ssh, "\" from agent\r\n");
}
- authed = TRUE;
+ s->authed = TRUE;
} else
logevent
("Pageant's response not accepted");
logevent("No reply received from Pageant");
}
}
- freebn(key.exponent);
- freebn(key.modulus);
- freebn(challenge);
- if (authed)
+ freebn(s->key.exponent);
+ freebn(s->key.modulus);
+ freebn(s->challenge);
+ if (s->authed)
break;
}
- }
- if (authed)
+ sfree(s->response);
+ if (s->publickey_blob && !s->tried_publickey)
+ logevent("Configured key file not in Pageant");
+ } else {
+ logevent("Failed to get reply from Pageant");
+ }
+ if (s->authed)
break;
}
- if (*cfg.keyfile && !tried_publickey)
- pwpkt_type = SSH1_CMSG_AUTH_RSA;
+ if (s->publickey_blob && !s->tried_publickey) {
+ /*
+ * Try public key authentication with the specified
+ * key file.
+ */
+ int got_passphrase; /* need not be kept over crReturn */
+ if (flags & FLAG_VERBOSE)
+ c_write_str(ssh, "Trying public key authentication.\r\n");
+ s->keyfile = conf_get_filename(ssh->conf, CONF_keyfile);
+ logeventf(ssh, "Trying public key \"%s\"",
+ filename_to_str(s->keyfile));
+ s->tried_publickey = 1;
+ got_passphrase = FALSE;
+ while (!got_passphrase) {
+ /*
+ * Get a passphrase, if necessary.
+ */
+ char *passphrase = NULL; /* only written after crReturn */
+ const char *error;
+ if (!s->publickey_encrypted) {
+ if (flags & FLAG_VERBOSE)
+ c_write_str(ssh, "No passphrase required.\r\n");
+ passphrase = NULL;
+ } else {
+ int ret; /* need not be kept over crReturn */
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = FALSE;
+ s->cur_prompt->name = dupstr("SSH key passphrase");
+ add_prompt(s->cur_prompt,
+ dupprintf("Passphrase for key \"%.100s\": ",
+ s->publickey_comment), FALSE);
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntil(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
+ }
+ if (!ret) {
+ /* Failed to get a passphrase. Terminate. */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, NULL, "Unable to authenticate",
+ 0, TRUE);
+ crStop(0);
+ }
+ passphrase = dupstr(s->cur_prompt->prompts[0]->result);
+ free_prompts(s->cur_prompt);
+ }
+ /*
+ * Try decrypting key with passphrase.
+ */
+ s->keyfile = conf_get_filename(ssh->conf, CONF_keyfile);
+ ret = loadrsakey(s->keyfile, &s->key, passphrase,
+ &error);
+ if (passphrase) {
+ smemclr(passphrase, strlen(passphrase));
+ sfree(passphrase);
+ }
+ if (ret == 1) {
+ /* Correct passphrase. */
+ got_passphrase = TRUE;
+ } else if (ret == 0) {
+ c_write_str(ssh, "Couldn't load private key from ");
+ c_write_str(ssh, filename_to_str(s->keyfile));
+ c_write_str(ssh, " (");
+ c_write_str(ssh, error);
+ c_write_str(ssh, ").\r\n");
+ got_passphrase = FALSE;
+ break; /* go and try something else */
+ } else if (ret == -1) {
+ c_write_str(ssh, "Wrong passphrase.\r\n"); /* FIXME */
+ got_passphrase = FALSE;
+ /* and try again */
+ } else {
+ assert(0 && "unexpected return from loadrsakey()");
+ got_passphrase = FALSE; /* placate optimisers */
+ }
+ }
+
+ if (got_passphrase) {
+
+ /*
+ * Send a public key attempt.
+ */
+ send_packet(ssh, SSH1_CMSG_AUTH_RSA,
+ PKT_BIGNUM, s->key.modulus, PKT_END);
+
+ crWaitUntil(pktin);
+ if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused our public key.\r\n");
+ continue; /* go and try something else */
+ }
+ if (pktin->type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
+ bombout(("Bizarre response to offer of public key"));
+ crStop(0);
+ }
+
+ {
+ int i;
+ unsigned char buffer[32];
+ Bignum challenge, response;
+
+ if ((challenge = ssh1_pkt_getmp(pktin)) == NULL) {
+ bombout(("Server's RSA challenge was badly formatted"));
+ crStop(0);
+ }
+ response = rsadecrypt(challenge, &s->key);
+ freebn(s->key.private_exponent);/* burn the evidence */
+
+ for (i = 0; i < 32; i++) {
+ buffer[i] = bignum_byte(response, 31 - i);
+ }
+
+ MD5Init(&md5c);
+ MD5Update(&md5c, buffer, 32);
+ MD5Update(&md5c, s->session_id, 16);
+ MD5Final(buffer, &md5c);
+
+ send_packet(ssh, SSH1_CMSG_AUTH_RSA_RESPONSE,
+ PKT_DATA, buffer, 16, PKT_END);
+
+ freebn(challenge);
+ freebn(response);
+ }
+
+ crWaitUntil(pktin);
+ if (pktin->type == SSH1_SMSG_FAILURE) {
+ if (flags & FLAG_VERBOSE)
+ c_write_str(ssh, "Failed to authenticate with"
+ " our public key.\r\n");
+ continue; /* go and try something else */
+ } else if (pktin->type != SSH1_SMSG_SUCCESS) {
+ bombout(("Bizarre response to RSA authentication response"));
+ crStop(0);
+ }
+
+ break; /* we're through! */
+ }
+
+ }
+
+ /*
+ * Otherwise, try various forms of password-like authentication.
+ */
+ s->cur_prompt = new_prompts(ssh->frontend);
- if (cfg.try_tis_auth &&
- (supported_auths_mask & (1 << SSH1_AUTH_TIS)) &&
- !tis_auth_refused) {
- pwpkt_type = SSH1_CMSG_AUTH_TIS_RESPONSE;
+ if (conf_get_int(ssh->conf, CONF_try_tis_auth) &&
+ (s->supported_auths_mask & (1 << SSH1_AUTH_TIS)) &&
+ !s->tis_auth_refused) {
+ s->pwpkt_type = SSH1_CMSG_AUTH_TIS_RESPONSE;
logevent("Requested TIS authentication");
- send_packet(SSH1_CMSG_AUTH_TIS, PKT_END);
- crWaitUntil(ispkt);
- if (pktin.type != SSH1_SMSG_AUTH_TIS_CHALLENGE) {
+ send_packet(ssh, SSH1_CMSG_AUTH_TIS, PKT_END);
+ crWaitUntil(pktin);
+ if (pktin->type != SSH1_SMSG_AUTH_TIS_CHALLENGE) {
logevent("TIS authentication declined");
if (flags & FLAG_INTERACTIVE)
- c_write_str("TIS authentication refused.\r\n");
- tis_auth_refused = 1;
+ c_write_str(ssh, "TIS authentication refused.\r\n");
+ s->tis_auth_refused = 1;
continue;
} else {
- int challengelen = ((pktin.body[0] << 24) |
- (pktin.body[1] << 16) |
- (pktin.body[2] << 8) |
- (pktin.body[3]));
+ char *challenge;
+ int challengelen;
+ char *instr_suf, *prompt;
+
+ ssh_pkt_getstring(pktin, &challenge, &challengelen);
+ if (!challenge) {
+ bombout(("TIS challenge packet was badly formed"));
+ crStop(0);
+ }
logevent("Received TIS challenge");
- if (challengelen > sizeof(prompt) - 1)
- challengelen = sizeof(prompt) - 1; /* prevent overrun */
- memcpy(prompt, pktin.body + 4, challengelen);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH TIS authentication");
/* Prompt heuristic comes from OpenSSH */
- strncpy(prompt + challengelen,
- memchr(prompt, '\n', challengelen) ?
- "": "\r\nResponse: ",
- (sizeof prompt) - challengelen);
- prompt[(sizeof prompt) - 1] = '\0';
+ if (memchr(challenge, '\n', challengelen)) {
+ instr_suf = dupstr("");
+ prompt = dupprintf("%.*s", challengelen, challenge);
+ } else {
+ instr_suf = dupprintf("%.*s", challengelen, challenge);
+ prompt = dupstr("Response: ");
+ }
+ s->cur_prompt->instruction =
+ dupprintf("Using TIS authentication.%s%s",
+ (*instr_suf) ? "\n" : "",
+ instr_suf);
+ s->cur_prompt->instr_reqd = TRUE;
+ add_prompt(s->cur_prompt, prompt, FALSE);
+ sfree(instr_suf);
}
}
- if (cfg.try_tis_auth &&
- (supported_auths_mask & (1 << SSH1_AUTH_CCARD)) &&
- !ccard_auth_refused) {
- pwpkt_type = SSH1_CMSG_AUTH_CCARD_RESPONSE;
+ if (conf_get_int(ssh->conf, CONF_try_tis_auth) &&
+ (s->supported_auths_mask & (1 << SSH1_AUTH_CCARD)) &&
+ !s->ccard_auth_refused) {
+ s->pwpkt_type = SSH1_CMSG_AUTH_CCARD_RESPONSE;
logevent("Requested CryptoCard authentication");
- send_packet(SSH1_CMSG_AUTH_CCARD, PKT_END);
- crWaitUntil(ispkt);
- if (pktin.type != SSH1_SMSG_AUTH_CCARD_CHALLENGE) {
+ send_packet(ssh, SSH1_CMSG_AUTH_CCARD, PKT_END);
+ crWaitUntil(pktin);
+ if (pktin->type != SSH1_SMSG_AUTH_CCARD_CHALLENGE) {
logevent("CryptoCard authentication declined");
- c_write_str("CryptoCard authentication refused.\r\n");
- ccard_auth_refused = 1;
+ c_write_str(ssh, "CryptoCard authentication refused.\r\n");
+ s->ccard_auth_refused = 1;
continue;
} else {
- int challengelen = ((pktin.body[0] << 24) |
- (pktin.body[1] << 16) |
- (pktin.body[2] << 8) |
- (pktin.body[3]));
+ char *challenge;
+ int challengelen;
+ char *instr_suf, *prompt;
+
+ ssh_pkt_getstring(pktin, &challenge, &challengelen);
+ if (!challenge) {
+ bombout(("CryptoCard challenge packet was badly formed"));
+ crStop(0);
+ }
logevent("Received CryptoCard challenge");
- if (challengelen > sizeof(prompt) - 1)
- challengelen = sizeof(prompt) - 1; /* prevent overrun */
- memcpy(prompt, pktin.body + 4, challengelen);
- strncpy(prompt + challengelen,
- memchr(prompt, '\n', challengelen) ?
- "" : "\r\nResponse: ",
- sizeof(prompt) - challengelen);
- prompt[sizeof(prompt) - 1] = '\0';
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH CryptoCard authentication");
+ s->cur_prompt->name_reqd = FALSE;
+ /* Prompt heuristic comes from OpenSSH */
+ if (memchr(challenge, '\n', challengelen)) {
+ instr_suf = dupstr("");
+ prompt = dupprintf("%.*s", challengelen, challenge);
+ } else {
+ instr_suf = dupprintf("%.*s", challengelen, challenge);
+ prompt = dupstr("Response: ");
+ }
+ s->cur_prompt->instruction =
+ dupprintf("Using CryptoCard authentication.%s%s",
+ (*instr_suf) ? "\n" : "",
+ instr_suf);
+ s->cur_prompt->instr_reqd = TRUE;
+ add_prompt(s->cur_prompt, prompt, FALSE);
+ sfree(instr_suf);
}
}
- if (pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
- sprintf(prompt, "%.90s@%.90s's password: ",
- username, savedhost);
- }
- if (pwpkt_type == SSH1_CMSG_AUTH_RSA) {
- char *comment = NULL;
- int type;
- char msgbuf[256];
- if (flags & FLAG_VERBOSE)
- c_write_str("Trying public key authentication.\r\n");
- sprintf(msgbuf, "Trying public key \"%.200s\"", cfg.keyfile);
- logevent(msgbuf);
- type = key_type(cfg.keyfile);
- if (type != SSH_KEYTYPE_SSH1) {
- sprintf(msgbuf, "Key is of wrong type (%s)",
- key_type_to_str(type));
- logevent(msgbuf);
- c_write_str(msgbuf);
- c_write_str("\r\n");
- tried_publickey = 1;
- continue;
- }
- if (!rsakey_encrypted(cfg.keyfile, &comment)) {
- if (flags & FLAG_VERBOSE)
- c_write_str("No passphrase required.\r\n");
- goto tryauth;
+ if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
+ if ((s->supported_auths_mask & (1 << SSH1_AUTH_PASSWORD)) == 0) {
+ bombout(("No supported authentication methods available"));
+ crStop(0);
}
- sprintf(prompt, "Passphrase for key \"%.100s\": ", comment);
- sfree(comment);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH password");
+ add_prompt(s->cur_prompt, dupprintf("%s@%s's password: ",
+ ssh->username, ssh->savedhost),
+ FALSE);
}
/*
* or CryptoCard exchange if we're doing TIS or CryptoCard
* authentication.
*/
- if (ssh_get_line) {
- if (!ssh_get_line(prompt, password, sizeof(password), TRUE)) {
+ {
+ int ret; /* need not be kept over crReturn */
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntil(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
+ }
+ if (!ret) {
/*
- * get_line failed to get a password (for example
+ * Failed to get a password (for example
* because one was supplied on the command line
* which has already failed to work). Terminate.
*/
- send_packet(SSH1_MSG_DISCONNECT,
- PKT_STR, "No more passwords available to try",
- PKT_END);
- logevent("Unable to authenticate");
- connection_fatal("Unable to authenticate");
- ssh_state = SSH_STATE_CLOSED;
- crReturn(1);
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, NULL, "Unable to authenticate", 0, TRUE);
+ crStop(0);
}
- } else {
- /* Prompt may have come from server. We've munged it a bit, so
- * we know it to be zero-terminated at least once. */
- static int ret;
- c_write_untrusted(prompt, strlen(prompt));
- pos = 0;
-
- setup_userpass_input(password, sizeof(password), 0);
- do {
- crWaitUntil(!ispkt);
- ret = process_userpass_input(in, inlen);
- } while (ret == 0);
- if (ret < 0)
- cleanup_exit(0);
- c_write_str("\r\n");
}
- tryauth:
- if (pwpkt_type == SSH1_CMSG_AUTH_RSA) {
+ if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
/*
- * Try public key authentication with the specified
- * key file.
+ * Defence against traffic analysis: we send a
+ * whole bunch of packets containing strings of
+ * different lengths. One of these strings is the
+ * password, in a SSH1_CMSG_AUTH_PASSWORD packet.
+ * The others are all random data in
+ * SSH1_MSG_IGNORE packets. This way a passive
+ * listener can't tell which is the password, and
+ * hence can't deduce the password length.
+ *
+ * Anybody with a password length greater than 16
+ * bytes is going to have enough entropy in their
+ * password that a listener won't find it _that_
+ * much help to know how long it is. So what we'll
+ * do is:
+ *
+ * - if password length < 16, we send 15 packets
+ * containing string lengths 1 through 15
+ *
+ * - otherwise, we let N be the nearest multiple
+ * of 8 below the password length, and send 8
+ * packets containing string lengths N through
+ * N+7. This won't obscure the order of
+ * magnitude of the password length, but it will
+ * introduce a bit of extra uncertainty.
+ *
+ * A few servers can't deal with SSH1_MSG_IGNORE, at
+ * least in this context. For these servers, we need
+ * an alternative defence. We make use of the fact
+ * that the password is interpreted as a C string:
+ * so we can append a NUL, then some random data.
+ *
+ * A few servers can deal with neither SSH1_MSG_IGNORE
+ * here _nor_ a padded password string.
+ * For these servers we are left with no defences
+ * against password length sniffing.
*/
- static struct RSAKey pubkey;
- static Bignum challenge, response;
- static int i;
- static unsigned char buffer[32];
-
- tried_publickey = 1;
- i = loadrsakey(cfg.keyfile, &pubkey, password);
- if (i == 0) {
- c_write_str("Couldn't load private key from ");
- c_write_str(cfg.keyfile);
- c_write_str(".\r\n");
- continue; /* go and try password */
- }
- if (i == -1) {
- c_write_str("Wrong passphrase.\r\n");
- tried_publickey = 0;
- continue; /* try again */
- }
+ if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE) &&
+ !(ssh->remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
+ /*
+ * The server can deal with SSH1_MSG_IGNORE, so
+ * we can use the primary defence.
+ */
+ int bottom, top, pwlen, i;
+ char *randomstr;
- /*
- * Send a public key attempt.
- */
- send_packet(SSH1_CMSG_AUTH_RSA,
- PKT_BIGNUM, pubkey.modulus, PKT_END);
+ pwlen = strlen(s->cur_prompt->prompts[0]->result);
+ if (pwlen < 16) {
+ bottom = 0; /* zero length passwords are OK! :-) */
+ top = 15;
+ } else {
+ bottom = pwlen & ~7;
+ top = bottom + 7;
+ }
- crWaitUntil(ispkt);
- if (pktin.type == SSH1_SMSG_FAILURE) {
- c_write_str("Server refused our public key.\r\n");
- continue; /* go and try password */
- }
- if (pktin.type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
- bombout(("Bizarre response to offer of public key"));
- crReturn(0);
- }
- ssh1_read_bignum(pktin.body, &challenge);
- response = rsadecrypt(challenge, &pubkey);
- freebn(pubkey.private_exponent); /* burn the evidence */
+ assert(pwlen >= bottom && pwlen <= top);
- for (i = 0; i < 32; i++) {
- buffer[i] = bignum_byte(response, 31 - i);
- }
+ randomstr = snewn(top + 1, char);
- MD5Init(&md5c);
- MD5Update(&md5c, buffer, 32);
- MD5Update(&md5c, session_id, 16);
- MD5Final(buffer, &md5c);
-
- send_packet(SSH1_CMSG_AUTH_RSA_RESPONSE,
- PKT_DATA, buffer, 16, PKT_END);
-
- crWaitUntil(ispkt);
- if (pktin.type == SSH1_SMSG_FAILURE) {
- if (flags & FLAG_VERBOSE)
- c_write_str
- ("Failed to authenticate with our public key.\r\n");
- continue; /* go and try password */
- } else if (pktin.type != SSH1_SMSG_SUCCESS) {
- bombout(
- ("Bizarre response to RSA authentication response"));
- crReturn(0);
- }
-
- break; /* we're through! */
- } else {
- if (pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
- /*
- * Defence against traffic analysis: we send a
- * whole bunch of packets containing strings of
- * different lengths. One of these strings is the
- * password, in a SSH1_CMSG_AUTH_PASSWORD packet.
- * The others are all random data in
- * SSH1_MSG_IGNORE packets. This way a passive
- * listener can't tell which is the password, and
- * hence can't deduce the password length.
- *
- * Anybody with a password length greater than 16
- * bytes is going to have enough entropy in their
- * password that a listener won't find it _that_
- * much help to know how long it is. So what we'll
- * do is:
- *
- * - if password length < 16, we send 15 packets
- * containing string lengths 1 through 15
- *
- * - otherwise, we let N be the nearest multiple
- * of 8 below the password length, and send 8
- * packets containing string lengths N through
- * N+7. This won't obscure the order of
- * magnitude of the password length, but it will
- * introduce a bit of extra uncertainty.
- *
- * A few servers (the old 1.2.18 through 1.2.22)
- * can't deal with SSH1_MSG_IGNORE. For these
- * servers, we need an alternative defence. We make
- * use of the fact that the password is interpreted
- * as a C string: so we can append a NUL, then some
- * random data.
- *
- * One server (a Cisco one) can deal with neither
- * SSH1_MSG_IGNORE _nor_ a padded password string.
- * For this server we are left with no defences
- * against password length sniffing.
- */
- if (!(ssh_remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE)) {
- /*
- * The server can deal with SSH1_MSG_IGNORE, so
- * we can use the primary defence.
- */
- int bottom, top, pwlen, i;
- char *randomstr;
-
- pwlen = strlen(password);
- if (pwlen < 16) {
- bottom = 0; /* zero length passwords are OK! :-) */
- top = 15;
+ for (i = bottom; i <= top; i++) {
+ if (i == pwlen) {
+ defer_packet(ssh, s->pwpkt_type,
+ PKTT_PASSWORD, PKT_STR,
+ s->cur_prompt->prompts[0]->result,
+ PKTT_OTHER, PKT_END);
} else {
- bottom = pwlen & ~7;
- top = bottom + 7;
- }
-
- assert(pwlen >= bottom && pwlen <= top);
-
- randomstr = smalloc(top + 1);
-
- for (i = bottom; i <= top; i++) {
- if (i == pwlen)
- defer_packet(pwpkt_type, PKT_STR, password,
- PKT_END);
- else {
- for (j = 0; j < i; j++) {
- do {
- randomstr[j] = random_byte();
- } while (randomstr[j] == '\0');
- }
- randomstr[i] = '\0';
- defer_packet(SSH1_MSG_IGNORE,
- PKT_STR, randomstr, PKT_END);
+ for (j = 0; j < i; j++) {
+ do {
+ randomstr[j] = random_byte();
+ } while (randomstr[j] == '\0');
}
+ randomstr[i] = '\0';
+ defer_packet(ssh, SSH1_MSG_IGNORE,
+ PKT_STR, randomstr, PKT_END);
}
- logevent("Sending password with camouflage packets");
- ssh_pkt_defersend();
- }
- else if (!(ssh_remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
- /*
- * The server can't deal with SSH1_MSG_IGNORE
- * but can deal with padded passwords, so we
- * can use the secondary defence.
- */
- char string[64];
- char *s;
- int len;
-
- len = strlen(password);
- if (len < sizeof(string)) {
- s = string;
- strcpy(string, password);
- len++; /* cover the zero byte */
- while (len < sizeof(string)) {
- string[len++] = (char) random_byte();
- }
- } else {
- s = password;
+ }
+ logevent("Sending password with camouflage packets");
+ ssh_pkt_defersend(ssh);
+ sfree(randomstr);
+ }
+ else if (!(ssh->remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
+ /*
+ * The server can't deal with SSH1_MSG_IGNORE
+ * but can deal with padded passwords, so we
+ * can use the secondary defence.
+ */
+ char string[64];
+ char *ss;
+ int len;
+
+ len = strlen(s->cur_prompt->prompts[0]->result);
+ if (len < sizeof(string)) {
+ ss = string;
+ strcpy(string, s->cur_prompt->prompts[0]->result);
+ len++; /* cover the zero byte */
+ while (len < sizeof(string)) {
+ string[len++] = (char) random_byte();
}
- logevent("Sending length-padded password");
- send_packet(pwpkt_type, PKT_INT, len,
- PKT_DATA, s, len, PKT_END);
} else {
- /*
- * The server has _both_
- * BUG_CHOKES_ON_SSH1_IGNORE and
- * BUG_NEEDS_SSH1_PLAIN_PASSWORD. There is
- * therefore nothing we can do.
- */
- int len;
- len = strlen(password);
- logevent("Sending unpadded password");
- send_packet(pwpkt_type, PKT_INT, len,
- PKT_DATA, password, len, PKT_END);
+ ss = s->cur_prompt->prompts[0]->result;
}
+ logevent("Sending length-padded password");
+ send_packet(ssh, s->pwpkt_type, PKTT_PASSWORD,
+ PKT_INT, len, PKT_DATA, ss, len,
+ PKTT_OTHER, PKT_END);
} else {
- send_packet(pwpkt_type, PKT_STR, password, PKT_END);
+ /*
+ * The server is believed unable to cope with
+ * any of our password camouflage methods.
+ */
+ int len;
+ len = strlen(s->cur_prompt->prompts[0]->result);
+ logevent("Sending unpadded password");
+ send_packet(ssh, s->pwpkt_type,
+ PKTT_PASSWORD, PKT_INT, len,
+ PKT_DATA, s->cur_prompt->prompts[0]->result, len,
+ PKTT_OTHER, PKT_END);
}
+ } else {
+ send_packet(ssh, s->pwpkt_type, PKTT_PASSWORD,
+ PKT_STR, s->cur_prompt->prompts[0]->result,
+ PKTT_OTHER, PKT_END);
}
logevent("Sent password");
- memset(password, 0, strlen(password));
- crWaitUntil(ispkt);
- if (pktin.type == SSH1_SMSG_FAILURE) {
+ free_prompts(s->cur_prompt);
+ crWaitUntil(pktin);
+ if (pktin->type == SSH1_SMSG_FAILURE) {
if (flags & FLAG_VERBOSE)
- c_write_str("Access denied\r\n");
+ c_write_str(ssh, "Access denied\r\n");
logevent("Authentication refused");
- } else if (pktin.type == SSH1_MSG_DISCONNECT) {
- logevent("Received disconnect request");
- ssh_state = SSH_STATE_CLOSED;
- crReturn(1);
- } else if (pktin.type != SSH1_SMSG_SUCCESS) {
- bombout(("Strange packet received, type %d", pktin.type));
- crReturn(0);
+ } else if (pktin->type != SSH1_SMSG_SUCCESS) {
+ bombout(("Strange packet received, type %d", pktin->type));
+ crStop(0);
}
}
+ /* Clear up */
+ if (s->publickey_blob) {
+ sfree(s->publickey_blob);
+ sfree(s->publickey_comment);
+ }
+
logevent("Authentication successful");
crFinish(1);
}
-void sshfwd_close(struct ssh_channel *c)
+static void ssh_channel_try_eof(struct ssh_channel *c)
{
- if (c && !c->closes) {
- /*
- * If the channel's remoteid is -1, we have sent
- * CHANNEL_OPEN for this channel, but it hasn't even been
- * acknowledged by the server. So we must set a close flag
- * on it now, and then when the server acks the channel
- * open, we can close it then.
- */
- if (((int)c->remoteid) != -1) {
- if (ssh_version == 1) {
- send_packet(SSH1_MSG_CHANNEL_CLOSE, PKT_INT, c->remoteid,
- PKT_END);
- } else {
- ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
- ssh2_pkt_adduint32(c->remoteid);
- ssh2_pkt_send();
- }
- }
- c->closes = 1; /* sent MSG_CLOSE */
- if (c->type == CHAN_X11) {
- c->u.x11.s = NULL;
- logevent("Forwarded X11 connection terminated");
- } else if (c->type == CHAN_SOCKDATA ||
- c->type == CHAN_SOCKDATA_DORMANT) {
- c->u.pfd.s = NULL;
- logevent("Forwarded port closed");
- }
+ Ssh ssh = c->ssh;
+ assert(c->pending_eof); /* precondition for calling us */
+ if (c->halfopen)
+ return; /* can't close: not even opened yet */
+ if (ssh->version == 2 && bufchain_size(&c->v.v2.outbuffer) > 0)
+ return; /* can't send EOF: pending outgoing data */
+
+ c->pending_eof = FALSE; /* we're about to send it */
+ if (ssh->version == 1) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE, PKT_INT, c->remoteid,
+ PKT_END);
+ c->closes |= CLOSES_SENT_EOF;
+ } else {
+ struct Packet *pktout;
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_EOF);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_send(ssh, pktout);
+ c->closes |= CLOSES_SENT_EOF;
+ ssh2_channel_check_close(c);
+ }
+}
+
+void sshfwd_write_eof(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+
+ if (ssh->state == SSH_STATE_CLOSED)
+ return;
+
+ if (c->closes & CLOSES_SENT_EOF)
+ return;
+
+ c->pending_eof = TRUE;
+ ssh_channel_try_eof(c);
+}
+
+void sshfwd_unclean_close(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+
+ if (ssh->state == SSH_STATE_CLOSED)
+ return;
+
+ switch (c->type) {
+ case CHAN_X11:
+ x11_close(c->u.x11.s);
+ logevent("Forwarded X11 connection terminated due to local error");
+ break;
+ case CHAN_SOCKDATA:
+ case CHAN_SOCKDATA_DORMANT:
+ pfd_close(c->u.pfd.s);
+ logevent("Forwarded port closed due to local error");
+ break;
}
+ c->type = CHAN_ZOMBIE;
+
+ ssh2_channel_check_close(c);
}
int sshfwd_write(struct ssh_channel *c, char *buf, int len)
{
- if (ssh_version == 1) {
- send_packet(SSH1_MSG_CHANNEL_DATA,
+ Ssh ssh = c->ssh;
+
+ if (ssh->state == SSH_STATE_CLOSED)
+ return 0;
+
+ if (ssh->version == 1) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_DATA,
PKT_INT, c->remoteid,
- PKT_INT, len, PKT_DATA, buf, len, PKT_END);
+ PKT_INT, len, PKTT_DATA, PKT_DATA, buf, len,
+ PKTT_OTHER, PKT_END);
/*
- * In SSH1 we can return 0 here - implying that forwarded
+ * In SSH-1 we can return 0 here - implying that forwarded
* connections are never individually throttled - because
* the only circumstance that can cause throttling will be
* the whole SSH connection backing up, in which case
void sshfwd_unthrottle(struct ssh_channel *c, int bufsize)
{
- if (ssh_version == 1) {
- if (c->v.v1.throttling && bufsize < SSH1_BUFFER_LIMIT) {
- c->v.v1.throttling = 0;
- ssh1_throttle(-1);
- }
+ Ssh ssh = c->ssh;
+ int buflimit;
+
+ if (ssh->state == SSH_STATE_CLOSED)
+ return;
+
+ if (ssh->version == 1) {
+ buflimit = SSH1_BUFFER_LIMIT;
} else {
- ssh2_set_window(c, OUR_V2_WINSIZE - bufsize);
+ buflimit = c->v.v2.locmaxwin;
+ ssh2_set_window(c, bufsize < buflimit ? buflimit - bufsize : 0);
+ }
+ if (c->throttling_conn && bufsize <= buflimit) {
+ c->throttling_conn = 0;
+ ssh_throttle_conn(ssh, -1);
}
}
-static void ssh1_protocol(unsigned char *in, int inlen, int ispkt)
+static void ssh_queueing_handler(Ssh ssh, struct Packet *pktin)
{
- crBegin;
+ struct queued_handler *qh = ssh->qhead;
- random_init();
+ assert(qh != NULL);
- while (!do_ssh1_login(in, inlen, ispkt)) {
- crReturnV;
+ assert(pktin->type == qh->msg1 || pktin->type == qh->msg2);
+
+ if (qh->msg1 > 0) {
+ assert(ssh->packet_dispatch[qh->msg1] == ssh_queueing_handler);
+ ssh->packet_dispatch[qh->msg1] = ssh->q_saved_handler1;
+ }
+ if (qh->msg2 > 0) {
+ assert(ssh->packet_dispatch[qh->msg2] == ssh_queueing_handler);
+ ssh->packet_dispatch[qh->msg2] = ssh->q_saved_handler2;
}
- if (ssh_state == SSH_STATE_CLOSED)
- crReturnV;
- if (cfg.agentfwd && agent_exists()) {
- logevent("Requesting agent forwarding");
- send_packet(SSH1_CMSG_AGENT_REQUEST_FORWARDING, PKT_END);
- do {
- crReturnV;
- } while (!ispkt);
- if (pktin.type != SSH1_SMSG_SUCCESS
- && pktin.type != SSH1_SMSG_FAILURE) {
- bombout(("Protocol confusion"));
- crReturnV;
- } else if (pktin.type == SSH1_SMSG_FAILURE) {
- logevent("Agent forwarding refused");
- } else {
- logevent("Agent forwarding enabled");
- ssh_agentfwd_enabled = TRUE;
+ if (qh->next) {
+ ssh->qhead = qh->next;
+
+ if (ssh->qhead->msg1 > 0) {
+ ssh->q_saved_handler1 = ssh->packet_dispatch[ssh->qhead->msg1];
+ ssh->packet_dispatch[ssh->qhead->msg1] = ssh_queueing_handler;
+ }
+ if (ssh->qhead->msg2 > 0) {
+ ssh->q_saved_handler2 = ssh->packet_dispatch[ssh->qhead->msg2];
+ ssh->packet_dispatch[ssh->qhead->msg2] = ssh_queueing_handler;
}
+ } else {
+ ssh->qhead = ssh->qtail = NULL;
}
- if (cfg.x11_forward) {
- char proto[20], data[64];
- logevent("Requesting X11 forwarding");
- x11_invent_auth(proto, sizeof(proto), data, sizeof(data));
- if (ssh1_local_protoflags & SSH1_PROTOFLAG_SCREEN_NUMBER) {
- send_packet(SSH1_CMSG_X11_REQUEST_FORWARDING,
- PKT_STR, proto, PKT_STR, data,
- PKT_INT, 0, PKT_END);
- } else {
- send_packet(SSH1_CMSG_X11_REQUEST_FORWARDING,
- PKT_STR, proto, PKT_STR, data, PKT_END);
+ qh->handler(ssh, pktin, qh->ctx);
+
+ sfree(qh);
+}
+
+static void ssh_queue_handler(Ssh ssh, int msg1, int msg2,
+ chandler_fn_t handler, void *ctx)
+{
+ struct queued_handler *qh;
+
+ qh = snew(struct queued_handler);
+ qh->msg1 = msg1;
+ qh->msg2 = msg2;
+ qh->handler = handler;
+ qh->ctx = ctx;
+ qh->next = NULL;
+
+ if (ssh->qtail == NULL) {
+ ssh->qhead = qh;
+
+ if (qh->msg1 > 0) {
+ ssh->q_saved_handler1 = ssh->packet_dispatch[ssh->qhead->msg1];
+ ssh->packet_dispatch[qh->msg1] = ssh_queueing_handler;
}
- do {
- crReturnV;
- } while (!ispkt);
- if (pktin.type != SSH1_SMSG_SUCCESS
- && pktin.type != SSH1_SMSG_FAILURE) {
- bombout(("Protocol confusion"));
- crReturnV;
- } else if (pktin.type == SSH1_SMSG_FAILURE) {
- logevent("X11 forwarding refused");
- } else {
- logevent("X11 forwarding enabled");
- ssh_X11_fwd_enabled = TRUE;
+ if (qh->msg2 > 0) {
+ ssh->q_saved_handler2 = ssh->packet_dispatch[ssh->qhead->msg2];
+ ssh->packet_dispatch[qh->msg2] = ssh_queueing_handler;
}
+ } else {
+ ssh->qtail->next = qh;
}
+ ssh->qtail = qh;
+}
- {
- char type;
- static char *e;
- int n;
+static void ssh_rportfwd_succfail(Ssh ssh, struct Packet *pktin, void *ctx)
+{
+ struct ssh_rportfwd *rpf, *pf = (struct ssh_rportfwd *)ctx;
+
+ if (pktin->type == (ssh->version == 1 ? SSH1_SMSG_SUCCESS :
+ SSH2_MSG_REQUEST_SUCCESS)) {
+ logeventf(ssh, "Remote port forwarding from %s enabled",
+ pf->sportdesc);
+ } else {
+ logeventf(ssh, "Remote port forwarding from %s refused",
+ pf->sportdesc);
+
+ rpf = del234(ssh->rportfwds, pf);
+ assert(rpf == pf);
+ pf->pfrec->remote = NULL;
+ free_rportfwd(pf);
+ }
+}
+
+static void ssh_setup_portfwd(Ssh ssh, Conf *conf)
+{
+ struct ssh_portfwd *epf;
+ int i;
+ char *key, *val;
+
+ if (!ssh->portfwds) {
+ ssh->portfwds = newtree234(ssh_portcmp);
+ } else {
+ /*
+ * Go through the existing port forwardings and tag them
+ * with status==DESTROY. Any that we want to keep will be
+ * re-enabled (status==KEEP) as we go through the
+ * configuration and find out which bits are the same as
+ * they were before.
+ */
+ struct ssh_portfwd *epf;
+ int i;
+ for (i = 0; (epf = index234(ssh->portfwds, i)) != NULL; i++)
+ epf->status = DESTROY;
+ }
+
+ for (val = conf_get_str_strs(conf, CONF_portfwd, NULL, &key);
+ val != NULL;
+ val = conf_get_str_strs(conf, CONF_portfwd, key, &key)) {
+ char *kp, *kp2, *vp, *vp2;
+ char address_family, type;
int sport,dport,sserv,dserv;
- char sports[256], dports[256], host[256];
- char buf[1024];
- struct servent *se;
-
- ssh_rportfwds = newtree234(ssh_rportcmp_ssh1);
- /* Add port forwardings. */
- e = cfg.portfwd;
- while (*e) {
- type = *e++;
- n = 0;
- while (*e && *e != '\t')
- sports[n++] = *e++;
- sports[n] = 0;
- if (*e == '\t')
- e++;
- n = 0;
- while (*e && *e != ':')
- host[n++] = *e++;
- host[n] = 0;
- if (*e == ':')
- e++;
- n = 0;
- while (*e)
- dports[n++] = *e++;
- dports[n] = 0;
- e++;
+ char *sports, *dports, *saddr, *host;
+
+ kp = key;
+
+ address_family = 'A';
+ type = 'L';
+ if (*kp == 'A' || *kp == '4' || *kp == '6')
+ address_family = *kp++;
+ if (*kp == 'L' || *kp == 'R')
+ type = *kp++;
+
+ if ((kp2 = strchr(kp, ':')) != NULL) {
+ /*
+ * There's a colon in the middle of the source port
+ * string, which means that the part before it is
+ * actually a source address.
+ */
+ saddr = dupprintf("%.*s", (int)(kp2 - kp), kp);
+ sports = kp2+1;
+ } else {
+ saddr = NULL;
+ sports = kp;
+ }
+ sport = atoi(sports);
+ sserv = 0;
+ if (sport == 0) {
+ sserv = 1;
+ sport = net_service_lookup(sports);
+ if (!sport) {
+ logeventf(ssh, "Service lookup failed for source"
+ " port \"%s\"", sports);
+ }
+ }
+
+ if (type == 'L' && !strcmp(val, "D")) {
+ /* dynamic forwarding */
+ host = NULL;
+ dports = NULL;
+ dport = -1;
+ dserv = 0;
+ type = 'D';
+ } else {
+ /* ordinary forwarding */
+ vp = val;
+ vp2 = vp + strcspn(vp, ":");
+ host = dupprintf("%.*s", (int)(vp2 - vp), vp);
+ if (vp2)
+ vp2++;
+ dports = vp2;
dport = atoi(dports);
dserv = 0;
if (dport == 0) {
dserv = 1;
- se = getservbyname(dports, NULL);
- if (se != NULL) {
- dport = ntohs(se->s_port);
- } else {
- sprintf(buf,
- "Service lookup failed for destination port \"%s\"",
- dports);
- logevent(buf);
- }
- }
- sport = atoi(sports);
- sserv = 0;
- if (sport == 0) {
- sserv = 1;
- se = getservbyname(sports, NULL);
- if (se != NULL) {
- sport = ntohs(se->s_port);
- } else {
- sprintf(buf,
- "Service lookup failed for source port \"%s\"",
- sports);
- logevent(buf);
- }
- }
- if (sport && dport) {
- if (type == 'L') {
- pfd_addforward(host, dport, sport);
- sprintf(buf, "Local port %.*s%.*s%d%.*s forwarding to"
- " %s:%.*s%.*s%d%.*s",
- sserv ? strlen(sports) : 0, sports,
- sserv, "(", sport, sserv, ")",
- host,
- dserv ? strlen(dports) : 0, dports,
- dserv, "(", dport, dserv, ")");
- logevent(buf);
- } else {
- struct ssh_rportfwd *pf;
- pf = smalloc(sizeof(*pf));
- strcpy(pf->dhost, host);
- pf->dport = dport;
- if (add234(ssh_rportfwds, pf) != pf) {
- sprintf(buf,
- "Duplicate remote port forwarding to %s:%d",
- host, dport);
- logevent(buf);
- sfree(pf);
- } else {
- sprintf(buf, "Requesting remote port %.*s%.*s%d%.*s"
- " forward to %s:%.*s%.*s%d%.*s",
- sserv ? strlen(sports) : 0, sports,
- sserv, "(", sport, sserv, ")",
- host,
- dserv ? strlen(dports) : 0, dports,
- dserv, "(", dport, dserv, ")");
- logevent(buf);
- send_packet(SSH1_CMSG_PORT_FORWARD_REQUEST,
- PKT_INT, sport,
- PKT_STR, host,
- PKT_INT, dport,
- PKT_END);
- do {
- crReturnV;
- } while (!ispkt);
- if (pktin.type != SSH1_SMSG_SUCCESS
- && pktin.type != SSH1_SMSG_FAILURE) {
- bombout(("Protocol confusion"));
- crReturnV;
- } else if (pktin.type == SSH1_SMSG_FAILURE) {
- c_write_str("Server refused port forwarding\r\n");
- ssh_editing = ssh_echoing = 1;
- }
- logevent("Remote port forwarding enabled");
- }
+ dport = net_service_lookup(dports);
+ if (!dport) {
+ logeventf(ssh, "Service lookup failed for destination"
+ " port \"%s\"", dports);
}
}
}
- }
-
- if (!cfg.nopty) {
- send_packet(SSH1_CMSG_REQUEST_PTY,
- PKT_STR, cfg.termtype,
- PKT_INT, rows, PKT_INT, cols,
- PKT_INT, 0, PKT_INT, 0, PKT_CHAR, 0, PKT_END);
- ssh_state = SSH_STATE_INTERMED;
- do {
- crReturnV;
- } while (!ispkt);
- if (pktin.type != SSH1_SMSG_SUCCESS
- && pktin.type != SSH1_SMSG_FAILURE) {
- bombout(("Protocol confusion"));
- crReturnV;
- } else if (pktin.type == SSH1_SMSG_FAILURE) {
- c_write_str("Server refused to allocate pty\r\n");
- ssh_editing = ssh_echoing = 1;
- }
- logevent("Allocated pty");
- } else {
- ssh_editing = ssh_echoing = 1;
- }
- if (cfg.compression) {
- send_packet(SSH1_CMSG_REQUEST_COMPRESSION, PKT_INT, 6, PKT_END);
- do {
- crReturnV;
- } while (!ispkt);
- if (pktin.type != SSH1_SMSG_SUCCESS
- && pktin.type != SSH1_SMSG_FAILURE) {
- bombout(("Protocol confusion"));
- crReturnV;
- } else if (pktin.type == SSH1_SMSG_FAILURE) {
- c_write_str("Server refused to compress\r\n");
+ if (sport && dport) {
+ /* Set up a description of the source port. */
+ struct ssh_portfwd *pfrec, *epfrec;
+
+ pfrec = snew(struct ssh_portfwd);
+ pfrec->type = type;
+ pfrec->saddr = saddr;
+ pfrec->sserv = sserv ? dupstr(sports) : NULL;
+ pfrec->sport = sport;
+ pfrec->daddr = host;
+ pfrec->dserv = dserv ? dupstr(dports) : NULL;
+ pfrec->dport = dport;
+ pfrec->local = NULL;
+ pfrec->remote = NULL;
+ pfrec->addressfamily = (address_family == '4' ? ADDRTYPE_IPV4 :
+ address_family == '6' ? ADDRTYPE_IPV6 :
+ ADDRTYPE_UNSPEC);
+
+ epfrec = add234(ssh->portfwds, pfrec);
+ if (epfrec != pfrec) {
+ if (epfrec->status == DESTROY) {
+ /*
+ * We already have a port forwarding up and running
+ * with precisely these parameters. Hence, no need
+ * to do anything; simply re-tag the existing one
+ * as KEEP.
+ */
+ epfrec->status = KEEP;
+ }
+ /*
+ * Anything else indicates that there was a duplicate
+ * in our input, which we'll silently ignore.
+ */
+ free_portfwd(pfrec);
+ } else {
+ pfrec->status = CREATE;
+ }
+ } else {
+ sfree(saddr);
+ sfree(host);
}
- logevent("Started compression");
- ssh1_compressing = TRUE;
- zlib_compress_init();
- zlib_decompress_init();
}
/*
- * Start the shell or command.
- *
- * Special case: if the first-choice command is an SSH2
- * subsystem (hence not usable here) and the second choice
- * exists, we fall straight back to that.
+ * Now go through and destroy any port forwardings which were
+ * not re-enabled.
*/
- {
- char *cmd = cfg.remote_cmd_ptr;
-
- if (cfg.ssh_subsys && cfg.remote_cmd_ptr2) {
- cmd = cfg.remote_cmd_ptr2;
- ssh_fallback_cmd = TRUE;
- }
- if (*cmd)
- send_packet(SSH1_CMSG_EXEC_CMD, PKT_STR, cmd, PKT_END);
- else
- send_packet(SSH1_CMSG_EXEC_SHELL, PKT_END);
- logevent("Started session");
- }
+ for (i = 0; (epf = index234(ssh->portfwds, i)) != NULL; i++)
+ if (epf->status == DESTROY) {
+ char *message;
+
+ message = dupprintf("%s port forwarding from %s%s%d",
+ epf->type == 'L' ? "local" :
+ epf->type == 'R' ? "remote" : "dynamic",
+ epf->saddr ? epf->saddr : "",
+ epf->saddr ? ":" : "",
+ epf->sport);
+
+ if (epf->type != 'D') {
+ char *msg2 = dupprintf("%s to %s:%d", message,
+ epf->daddr, epf->dport);
+ sfree(message);
+ message = msg2;
+ }
- ssh_state = SSH_STATE_SESSION;
- if (size_needed)
- ssh_size();
- if (eof_needed)
- ssh_special(TS_EOF);
+ logeventf(ssh, "Cancelling %s", message);
+ sfree(message);
- ldisc_send(NULL, 0, 0); /* cause ldisc to notice changes */
- ssh_send_ok = 1;
- ssh_channels = newtree234(ssh_channelcmp);
- while (1) {
- crReturnV;
- if (ispkt) {
- if (pktin.type == SSH1_SMSG_STDOUT_DATA ||
- pktin.type == SSH1_SMSG_STDERR_DATA) {
- long len = GET_32BIT(pktin.body);
- int bufsize =
- from_backend(pktin.type == SSH1_SMSG_STDERR_DATA,
- pktin.body + 4, len);
- if (!ssh1_stdout_throttling && bufsize > SSH1_BUFFER_LIMIT) {
- ssh1_stdout_throttling = 1;
- ssh1_throttle(+1);
- }
- } else if (pktin.type == SSH1_MSG_DISCONNECT) {
- ssh_state = SSH_STATE_CLOSED;
- logevent("Received disconnect request");
- crReturnV;
- } else if (pktin.type == SSH1_SMSG_X11_OPEN) {
- /* Remote side is trying to open a channel to talk to our
- * X-Server. Give them back a local channel number. */
- struct ssh_channel *c;
-
- logevent("Received X11 connect request");
- /* Refuse if X11 forwarding is disabled. */
- if (!ssh_X11_fwd_enabled) {
- send_packet(SSH1_MSG_CHANNEL_OPEN_FAILURE,
- PKT_INT, GET_32BIT(pktin.body), PKT_END);
- logevent("Rejected X11 connect request");
- } else {
- c = smalloc(sizeof(struct ssh_channel));
+ /* epf->remote or epf->local may be NULL if setting up a
+ * forwarding failed. */
+ if (epf->remote) {
+ struct ssh_rportfwd *rpf = epf->remote;
+ struct Packet *pktout;
- if (x11_init(&c->u.x11.s, cfg.x11_display, c) != NULL) {
- logevent("opening X11 forward connection failed");
- sfree(c);
- send_packet(SSH1_MSG_CHANNEL_OPEN_FAILURE,
- PKT_INT, GET_32BIT(pktin.body),
- PKT_END);
- } else {
- logevent
- ("opening X11 forward connection succeeded");
- c->remoteid = GET_32BIT(pktin.body);
- c->localid = alloc_channel_id();
- c->closes = 0;
- c->v.v1.throttling = 0;
- c->type = CHAN_X11; /* identify channel type */
- add234(ssh_channels, c);
- send_packet(SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
- PKT_INT, c->remoteid, PKT_INT,
- c->localid, PKT_END);
- logevent("Opened X11 forward channel");
- }
- }
- } else if (pktin.type == SSH1_SMSG_AGENT_OPEN) {
- /* Remote side is trying to open a channel to talk to our
- * agent. Give them back a local channel number. */
- struct ssh_channel *c;
-
- /* Refuse if agent forwarding is disabled. */
- if (!ssh_agentfwd_enabled) {
- send_packet(SSH1_MSG_CHANNEL_OPEN_FAILURE,
- PKT_INT, GET_32BIT(pktin.body), PKT_END);
- } else {
- c = smalloc(sizeof(struct ssh_channel));
- c->remoteid = GET_32BIT(pktin.body);
- c->localid = alloc_channel_id();
- c->closes = 0;
- c->v.v1.throttling = 0;
- c->type = CHAN_AGENT; /* identify channel type */
- c->u.a.lensofar = 0;
- add234(ssh_channels, c);
- send_packet(SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
- PKT_INT, c->remoteid, PKT_INT, c->localid,
- PKT_END);
- }
- } else if (pktin.type == SSH1_MSG_PORT_OPEN) {
- /* Remote side is trying to open a channel to talk to a
- * forwarded port. Give them back a local channel number. */
- struct ssh_channel *c;
- struct ssh_rportfwd pf;
- int hostsize, port;
- char host[256], buf[1024];
- char *p, *h, *e;
- c = smalloc(sizeof(struct ssh_channel));
-
- hostsize = GET_32BIT(pktin.body+4);
- for(h = host, p = pktin.body+8; hostsize != 0; hostsize--) {
- if (h+1 < host+sizeof(host))
- *h++ = *p;
- p++;
- }
- *h = 0;
- port = GET_32BIT(p);
-
- strcpy(pf.dhost, host);
- pf.dport = port;
-
- if (find234(ssh_rportfwds, &pf, NULL) == NULL) {
- sprintf(buf, "Rejected remote port open request for %s:%d",
- host, port);
- logevent(buf);
- send_packet(SSH1_MSG_CHANNEL_OPEN_FAILURE,
- PKT_INT, GET_32BIT(pktin.body), PKT_END);
+ /*
+ * Cancel the port forwarding at the server
+ * end.
+ */
+ if (ssh->version == 1) {
+ /*
+ * We cannot cancel listening ports on the
+ * server side in SSH-1! There's no message
+ * to support it. Instead, we simply remove
+ * the rportfwd record from the local end
+ * so that any connections the server tries
+ * to make on it are rejected.
+ */
} else {
- sprintf(buf, "Received remote port open request for %s:%d",
- host, port);
- logevent(buf);
- e = pfd_newconnect(&c->u.pfd.s, host, port, c);
- if (e != NULL) {
- char buf[256];
- sprintf(buf, "Port open failed: %s", e);
- logevent(buf);
- sfree(c);
- send_packet(SSH1_MSG_CHANNEL_OPEN_FAILURE,
- PKT_INT, GET_32BIT(pktin.body),
- PKT_END);
+ pktout = ssh2_pkt_init(SSH2_MSG_GLOBAL_REQUEST);
+ ssh2_pkt_addstring(pktout, "cancel-tcpip-forward");
+ ssh2_pkt_addbool(pktout, 0);/* _don't_ want reply */
+ if (epf->saddr) {
+ ssh2_pkt_addstring(pktout, epf->saddr);
+ } else if (conf_get_int(conf, CONF_rport_acceptall)) {
+ /* XXX: rport_acceptall may not represent
+ * what was used to open the original connection,
+ * since it's reconfigurable. */
+ ssh2_pkt_addstring(pktout, "");
} else {
- c->remoteid = GET_32BIT(pktin.body);
- c->localid = alloc_channel_id();
- c->closes = 0;
- c->v.v1.throttling = 0;
- c->type = CHAN_SOCKDATA; /* identify channel type */
- add234(ssh_channels, c);
- send_packet(SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
- PKT_INT, c->remoteid, PKT_INT,
- c->localid, PKT_END);
- logevent("Forwarded port opened successfully");
+ ssh2_pkt_addstring(pktout, "localhost");
}
+ ssh2_pkt_adduint32(pktout, epf->sport);
+ ssh2_pkt_send(ssh, pktout);
}
- } else if (pktin.type == SSH1_MSG_CHANNEL_OPEN_CONFIRMATION) {
- unsigned int remoteid = GET_32BIT(pktin.body);
- unsigned int localid = GET_32BIT(pktin.body+4);
- struct ssh_channel *c;
-
- c = find234(ssh_channels, &remoteid, ssh_channelfind);
- if (c && c->type == CHAN_SOCKDATA_DORMANT) {
- c->remoteid = localid;
- c->type = CHAN_SOCKDATA;
- c->v.v1.throttling = 0;
- pfd_confirm(c->u.pfd.s);
- }
-
- if (c && c->closes) {
- /*
- * We have a pending close on this channel,
- * which we decided on before the server acked
- * the channel open. So now we know the
- * remoteid, we can close it again.
- */
- send_packet(SSH1_MSG_CHANNEL_CLOSE, PKT_INT, c->remoteid,
- PKT_END);
- }
+ del234(ssh->rportfwds, rpf);
+ free_rportfwd(rpf);
+ } else if (epf->local) {
+ pfd_terminate(epf->local);
+ }
- } else if (pktin.type == SSH1_MSG_CHANNEL_OPEN_FAILURE) {
- unsigned int remoteid = GET_32BIT(pktin.body);
- unsigned int localid = GET_32BIT(pktin.body+4);
- struct ssh_channel *c;
+ delpos234(ssh->portfwds, i);
+ free_portfwd(epf);
+ i--; /* so we don't skip one in the list */
+ }
- c = find234(ssh_channels, &remoteid, ssh_channelfind);
- if (c && c->type == CHAN_SOCKDATA_DORMANT) {
- logevent("Forwarded connection refused by server");
- pfd_close(c->u.pfd.s);
- del234(ssh_channels, c);
- sfree(c);
- }
+ /*
+ * And finally, set up any new port forwardings (status==CREATE).
+ */
+ for (i = 0; (epf = index234(ssh->portfwds, i)) != NULL; i++)
+ if (epf->status == CREATE) {
+ char *sportdesc, *dportdesc;
+ sportdesc = dupprintf("%s%s%s%s%d%s",
+ epf->saddr ? epf->saddr : "",
+ epf->saddr ? ":" : "",
+ epf->sserv ? epf->sserv : "",
+ epf->sserv ? "(" : "",
+ epf->sport,
+ epf->sserv ? ")" : "");
+ if (epf->type == 'D') {
+ dportdesc = NULL;
+ } else {
+ dportdesc = dupprintf("%s:%s%s%d%s",
+ epf->daddr,
+ epf->dserv ? epf->dserv : "",
+ epf->dserv ? "(" : "",
+ epf->dport,
+ epf->dserv ? ")" : "");
+ }
- } else if (pktin.type == SSH1_MSG_CHANNEL_CLOSE ||
- pktin.type == SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION) {
- /* Remote side closes a channel. */
- unsigned i = GET_32BIT(pktin.body);
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (c && ((int)c->remoteid) != -1) {
- int closetype;
- closetype =
- (pktin.type == SSH1_MSG_CHANNEL_CLOSE ? 1 : 2);
-
- if ((c->closes == 0) && (c->type == CHAN_X11)) {
- logevent("Forwarded X11 connection terminated");
- assert(c->u.x11.s != NULL);
- x11_close(c->u.x11.s);
- c->u.x11.s = NULL;
- }
- if ((c->closes == 0) && (c->type == CHAN_SOCKDATA)) {
- logevent("Forwarded port closed");
- assert(c->u.pfd.s != NULL);
- pfd_close(c->u.pfd.s);
- c->u.pfd.s = NULL;
- }
+ if (epf->type == 'L') {
+ const char *err = pfd_addforward(epf->daddr, epf->dport,
+ epf->saddr, epf->sport,
+ ssh, conf,
+ &epf->local,
+ epf->addressfamily);
+
+ logeventf(ssh, "Local %sport %s forwarding to %s%s%s",
+ epf->addressfamily == ADDRTYPE_IPV4 ? "IPv4 " :
+ epf->addressfamily == ADDRTYPE_IPV6 ? "IPv6 " : "",
+ sportdesc, dportdesc,
+ err ? " failed: " : "", err ? err : "");
+ } else if (epf->type == 'D') {
+ const char *err = pfd_addforward(NULL, -1,
+ epf->saddr, epf->sport,
+ ssh, conf,
+ &epf->local,
+ epf->addressfamily);
+
+ logeventf(ssh, "Local %sport %s SOCKS dynamic forwarding%s%s",
+ epf->addressfamily == ADDRTYPE_IPV4 ? "IPv4 " :
+ epf->addressfamily == ADDRTYPE_IPV6 ? "IPv6 " : "",
+ sportdesc,
+ err ? " failed: " : "", err ? err : "");
+ } else {
+ struct ssh_rportfwd *pf;
- c->closes |= (closetype << 2); /* seen this message */
- if (!(c->closes & closetype)) {
- send_packet(pktin.type, PKT_INT, c->remoteid,
- PKT_END);
- c->closes |= closetype; /* sent it too */
- }
+ /*
+ * Ensure the remote port forwardings tree exists.
+ */
+ if (!ssh->rportfwds) {
+ if (ssh->version == 1)
+ ssh->rportfwds = newtree234(ssh_rportcmp_ssh1);
+ else
+ ssh->rportfwds = newtree234(ssh_rportcmp_ssh2);
+ }
- if (c->closes == 15) {
- del234(ssh_channels, c);
- sfree(c);
- }
+ pf = snew(struct ssh_rportfwd);
+ strncpy(pf->dhost, epf->daddr, lenof(pf->dhost)-1);
+ pf->dhost[lenof(pf->dhost)-1] = '\0';
+ pf->dport = epf->dport;
+ pf->sport = epf->sport;
+ if (add234(ssh->rportfwds, pf) != pf) {
+ logeventf(ssh, "Duplicate remote port forwarding to %s:%d",
+ epf->daddr, epf->dport);
+ sfree(pf);
} else {
- bombout(("Received CHANNEL_CLOSE%s for %s channel %d\n",
- pktin.type == SSH1_MSG_CHANNEL_CLOSE ? "" :
- "_CONFIRMATION", c ? "half-open" : "nonexistent",
- i));
- }
- } else if (pktin.type == SSH1_MSG_CHANNEL_DATA) {
- /* Data sent down one of our channels. */
- int i = GET_32BIT(pktin.body);
- int len = GET_32BIT(pktin.body + 4);
- unsigned char *p = pktin.body + 8;
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (c) {
- int bufsize;
- switch (c->type) {
- case CHAN_X11:
- bufsize = x11_send(c->u.x11.s, p, len);
- break;
- case CHAN_SOCKDATA:
- bufsize = pfd_send(c->u.pfd.s, p, len);
- break;
- case CHAN_AGENT:
- /* Data for an agent message. Buffer it. */
- while (len > 0) {
- if (c->u.a.lensofar < 4) {
- int l = min(4 - c->u.a.lensofar, len);
- memcpy(c->u.a.msglen + c->u.a.lensofar, p,
- l);
- p += l;
- len -= l;
- c->u.a.lensofar += l;
- }
- if (c->u.a.lensofar == 4) {
- c->u.a.totallen =
- 4 + GET_32BIT(c->u.a.msglen);
- c->u.a.message = smalloc(c->u.a.totallen);
- memcpy(c->u.a.message, c->u.a.msglen, 4);
- }
- if (c->u.a.lensofar >= 4 && len > 0) {
- int l =
- min(c->u.a.totallen - c->u.a.lensofar,
- len);
- memcpy(c->u.a.message + c->u.a.lensofar, p,
- l);
- p += l;
- len -= l;
- c->u.a.lensofar += l;
- }
- if (c->u.a.lensofar == c->u.a.totallen) {
- void *reply, *sentreply;
- int replylen;
- agent_query(c->u.a.message,
- c->u.a.totallen, &reply,
- &replylen);
- if (reply)
- sentreply = reply;
- else {
- /* Fake SSH_AGENT_FAILURE. */
- sentreply = "\0\0\0\1\5";
- replylen = 5;
- }
- send_packet(SSH1_MSG_CHANNEL_DATA,
- PKT_INT, c->remoteid,
- PKT_INT, replylen,
- PKT_DATA, sentreply, replylen,
- PKT_END);
- if (reply)
- sfree(reply);
- sfree(c->u.a.message);
- c->u.a.lensofar = 0;
- }
+ logeventf(ssh, "Requesting remote port %s"
+ " forward to %s", sportdesc, dportdesc);
+
+ pf->sportdesc = sportdesc;
+ sportdesc = NULL;
+ epf->remote = pf;
+ pf->pfrec = epf;
+
+ if (ssh->version == 1) {
+ send_packet(ssh, SSH1_CMSG_PORT_FORWARD_REQUEST,
+ PKT_INT, epf->sport,
+ PKT_STR, epf->daddr,
+ PKT_INT, epf->dport,
+ PKT_END);
+ ssh_queue_handler(ssh, SSH1_SMSG_SUCCESS,
+ SSH1_SMSG_FAILURE,
+ ssh_rportfwd_succfail, pf);
+ } else {
+ struct Packet *pktout;
+ pktout = ssh2_pkt_init(SSH2_MSG_GLOBAL_REQUEST);
+ ssh2_pkt_addstring(pktout, "tcpip-forward");
+ ssh2_pkt_addbool(pktout, 1);/* want reply */
+ if (epf->saddr) {
+ ssh2_pkt_addstring(pktout, epf->saddr);
+ } else if (conf_get_int(conf, CONF_rport_acceptall)) {
+ ssh2_pkt_addstring(pktout, "");
+ } else {
+ ssh2_pkt_addstring(pktout, "localhost");
}
- bufsize = 0; /* agent channels never back up */
- break;
- }
- if (!c->v.v1.throttling && bufsize > SSH1_BUFFER_LIMIT) {
- c->v.v1.throttling = 1;
- ssh1_throttle(+1);
+ ssh2_pkt_adduint32(pktout, epf->sport);
+ ssh2_pkt_send(ssh, pktout);
+
+ ssh_queue_handler(ssh, SSH2_MSG_REQUEST_SUCCESS,
+ SSH2_MSG_REQUEST_FAILURE,
+ ssh_rportfwd_succfail, pf);
}
}
- } else if (pktin.type == SSH1_SMSG_SUCCESS) {
- /* may be from EXEC_SHELL on some servers */
- } else if (pktin.type == SSH1_SMSG_FAILURE) {
- /* may be from EXEC_SHELL on some servers
- * if no pty is available or in other odd cases. Ignore */
- } else if (pktin.type == SSH1_SMSG_EXIT_STATUS) {
- char buf[100];
- ssh_exitcode = GET_32BIT(pktin.body);
- sprintf(buf, "Server sent command exit status %d",
- ssh_exitcode);
- logevent(buf);
- send_packet(SSH1_CMSG_EXIT_CONFIRMATION, PKT_END);
- /*
- * In case `helpful' firewalls or proxies tack
- * extra human-readable text on the end of the
- * session which we might mistake for another
- * encrypted packet, we close the session once
- * we've sent EXIT_CONFIRMATION.
- */
- ssh_state = SSH_STATE_CLOSED;
- crReturnV;
- } else {
- bombout(("Strange packet received: type %d", pktin.type));
- crReturnV;
- }
- } else {
- while (inlen > 0) {
- int len = min(inlen, 512);
- send_packet(SSH1_CMSG_STDIN_DATA,
- PKT_INT, len, PKT_DATA, in, len, PKT_END);
- in += len;
- inlen -= len;
}
+ sfree(sportdesc);
+ sfree(dportdesc);
}
+}
+
+static void ssh1_smsg_stdout_stderr_data(Ssh ssh, struct Packet *pktin)
+{
+ char *string;
+ int stringlen, bufsize;
+
+ ssh_pkt_getstring(pktin, &string, &stringlen);
+ if (string == NULL) {
+ bombout(("Incoming terminal data packet was badly formed"));
+ return;
}
- crFinishV;
+ bufsize = from_backend(ssh->frontend, pktin->type == SSH1_SMSG_STDERR_DATA,
+ string, stringlen);
+ if (!ssh->v1_stdout_throttling && bufsize > SSH1_BUFFER_LIMIT) {
+ ssh->v1_stdout_throttling = 1;
+ ssh_throttle_conn(ssh, +1);
+ }
}
-/*
- * Utility routine for decoding comma-separated strings in KEXINIT.
- */
-static int in_commasep_string(char *needle, char *haystack, int haylen)
+static void ssh1_smsg_x11_open(Ssh ssh, struct Packet *pktin)
{
- int needlen = strlen(needle);
- while (1) {
- /*
- * Is it at the start of the string?
- */
- if (haylen >= needlen && /* haystack is long enough */
- !memcmp(needle, haystack, needlen) && /* initial match */
- (haylen == needlen || haystack[needlen] == ',')
- /* either , or EOS follows */
- )
- return 1;
+ /* Remote side is trying to open a channel to talk to our
+ * X-Server. Give them back a local channel number. */
+ struct ssh_channel *c;
+ int remoteid = ssh_pkt_getuint32(pktin);
+
+ logevent("Received X11 connect request");
+ /* Refuse if X11 forwarding is disabled. */
+ if (!ssh->X11_fwd_enabled) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
+ PKT_INT, remoteid, PKT_END);
+ logevent("Rejected X11 connect request");
+ } else {
+ c = snew(struct ssh_channel);
+ c->ssh = ssh;
+
+ if (x11_init(&c->u.x11.s, ssh->x11disp, c,
+ NULL, -1, ssh->conf) != NULL) {
+ logevent("Opening X11 forward connection failed");
+ sfree(c);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
+ PKT_INT, remoteid, PKT_END);
+ } else {
+ logevent
+ ("Opening X11 forward connection succeeded");
+ c->remoteid = remoteid;
+ c->halfopen = FALSE;
+ c->localid = alloc_channel_id(ssh);
+ c->closes = 0;
+ c->pending_eof = FALSE;
+ c->throttling_conn = 0;
+ c->type = CHAN_X11; /* identify channel type */
+ add234(ssh->channels, c);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
+ PKT_INT, c->remoteid, PKT_INT,
+ c->localid, PKT_END);
+ logevent("Opened X11 forward channel");
+ }
+ }
+}
+
+static void ssh1_smsg_agent_open(Ssh ssh, struct Packet *pktin)
+{
+ /* Remote side is trying to open a channel to talk to our
+ * agent. Give them back a local channel number. */
+ struct ssh_channel *c;
+ int remoteid = ssh_pkt_getuint32(pktin);
+
+ /* Refuse if agent forwarding is disabled. */
+ if (!ssh->agentfwd_enabled) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
+ PKT_INT, remoteid, PKT_END);
+ } else {
+ c = snew(struct ssh_channel);
+ c->ssh = ssh;
+ c->remoteid = remoteid;
+ c->halfopen = FALSE;
+ c->localid = alloc_channel_id(ssh);
+ c->closes = 0;
+ c->pending_eof = FALSE;
+ c->throttling_conn = 0;
+ c->type = CHAN_AGENT; /* identify channel type */
+ c->u.a.lensofar = 0;
+ c->u.a.message = NULL;
+ c->u.a.outstanding_requests = 0;
+ add234(ssh->channels, c);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
+ PKT_INT, c->remoteid, PKT_INT, c->localid,
+ PKT_END);
+ }
+}
+
+static void ssh1_msg_port_open(Ssh ssh, struct Packet *pktin)
+{
+ /* Remote side is trying to open a channel to talk to a
+ * forwarded port. Give them back a local channel number. */
+ struct ssh_rportfwd pf, *pfp;
+ int remoteid;
+ int hostsize, port;
+ char *host;
+ const char *e;
+
+ remoteid = ssh_pkt_getuint32(pktin);
+ ssh_pkt_getstring(pktin, &host, &hostsize);
+ port = ssh_pkt_getuint32(pktin);
+
+ if (hostsize >= lenof(pf.dhost))
+ hostsize = lenof(pf.dhost)-1;
+ memcpy(pf.dhost, host, hostsize);
+ pf.dhost[hostsize] = '\0';
+ pf.dport = port;
+ pfp = find234(ssh->rportfwds, &pf, NULL);
+
+ if (pfp == NULL) {
+ logeventf(ssh, "Rejected remote port open request for %s:%d",
+ pf.dhost, port);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
+ PKT_INT, remoteid, PKT_END);
+ } else {
+ struct ssh_channel *c = snew(struct ssh_channel);
+ c->ssh = ssh;
+
+ logeventf(ssh, "Received remote port open request for %s:%d",
+ pf.dhost, port);
+ e = pfd_newconnect(&c->u.pfd.s, pf.dhost, port,
+ c, ssh->conf, pfp->pfrec->addressfamily);
+ if (e != NULL) {
+ logeventf(ssh, "Port open failed: %s", e);
+ sfree(c);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
+ PKT_INT, remoteid, PKT_END);
+ } else {
+ c->remoteid = remoteid;
+ c->halfopen = FALSE;
+ c->localid = alloc_channel_id(ssh);
+ c->closes = 0;
+ c->pending_eof = FALSE;
+ c->throttling_conn = 0;
+ c->type = CHAN_SOCKDATA; /* identify channel type */
+ add234(ssh->channels, c);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
+ PKT_INT, c->remoteid, PKT_INT,
+ c->localid, PKT_END);
+ logevent("Forwarded port opened successfully");
+ }
+ }
+}
+
+static void ssh1_msg_channel_open_confirmation(Ssh ssh, struct Packet *pktin)
+{
+ unsigned int remoteid = ssh_pkt_getuint32(pktin);
+ unsigned int localid = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+
+ c = find234(ssh->channels, &remoteid, ssh_channelfind);
+ if (c && c->type == CHAN_SOCKDATA_DORMANT) {
+ c->remoteid = localid;
+ c->halfopen = FALSE;
+ c->type = CHAN_SOCKDATA;
+ c->throttling_conn = 0;
+ pfd_confirm(c->u.pfd.s);
+ }
+
+ if (c && c->pending_eof) {
+ /*
+ * We have a pending close on this channel,
+ * which we decided on before the server acked
+ * the channel open. So now we know the
+ * remoteid, we can close it again.
+ */
+ ssh_channel_try_eof(c);
+ }
+}
+
+static void ssh1_msg_channel_open_failure(Ssh ssh, struct Packet *pktin)
+{
+ unsigned int remoteid = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+
+ c = find234(ssh->channels, &remoteid, ssh_channelfind);
+ if (c && c->type == CHAN_SOCKDATA_DORMANT) {
+ logevent("Forwarded connection refused by server");
+ pfd_close(c->u.pfd.s);
+ del234(ssh->channels, c);
+ sfree(c);
+ }
+}
+
+static void ssh1_msg_channel_close(Ssh ssh, struct Packet *pktin)
+{
+ /* Remote side closes a channel. */
+ unsigned i = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+ c = find234(ssh->channels, &i, ssh_channelfind);
+ if (c && !c->halfopen) {
+
+ if (pktin->type == SSH1_MSG_CHANNEL_CLOSE &&
+ !(c->closes & CLOSES_RCVD_EOF)) {
+ /*
+ * Received CHANNEL_CLOSE, which we translate into
+ * outgoing EOF.
+ */
+ int send_close = FALSE;
+
+ c->closes |= CLOSES_RCVD_EOF;
+
+ switch (c->type) {
+ case CHAN_X11:
+ if (c->u.x11.s)
+ x11_send_eof(c->u.x11.s);
+ else
+ send_close = TRUE;
+ break;
+ case CHAN_SOCKDATA:
+ if (c->u.pfd.s)
+ pfd_send_eof(c->u.pfd.s);
+ else
+ send_close = TRUE;
+ break;
+ case CHAN_AGENT:
+ send_close = TRUE;
+ break;
+ }
+
+ if (send_close && !(c->closes & CLOSES_SENT_EOF)) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE, PKT_INT, c->remoteid,
+ PKT_END);
+ c->closes |= CLOSES_SENT_EOF;
+ }
+ }
+
+ if (pktin->type == SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION &&
+ !(c->closes & CLOSES_RCVD_CLOSE)) {
+
+ if (!(c->closes & CLOSES_SENT_EOF)) {
+ bombout(("Received CHANNEL_CLOSE_CONFIRMATION for channel %d"
+ " for which we never sent CHANNEL_CLOSE\n", i));
+ }
+
+ c->closes |= CLOSES_RCVD_CLOSE;
+ }
+
+ if (!((CLOSES_SENT_EOF | CLOSES_RCVD_EOF) & ~c->closes) &&
+ !(c->closes & CLOSES_SENT_CLOSE)) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION,
+ PKT_INT, c->remoteid, PKT_END);
+ c->closes |= CLOSES_SENT_CLOSE;
+ }
+
+ if (!((CLOSES_SENT_CLOSE | CLOSES_RCVD_CLOSE) & ~c->closes))
+ ssh_channel_destroy(c);
+ } else {
+ bombout(("Received CHANNEL_CLOSE%s for %s channel %d\n",
+ pktin->type == SSH1_MSG_CHANNEL_CLOSE ? "" :
+ "_CONFIRMATION", c ? "half-open" : "nonexistent",
+ i));
+ }
+}
+
+static void ssh1_msg_channel_data(Ssh ssh, struct Packet *pktin)
+{
+ /* Data sent down one of our channels. */
+ int i = ssh_pkt_getuint32(pktin);
+ char *p;
+ int len;
+ struct ssh_channel *c;
+
+ ssh_pkt_getstring(pktin, &p, &len);
+
+ c = find234(ssh->channels, &i, ssh_channelfind);
+ if (c) {
+ int bufsize = 0;
+ switch (c->type) {
+ case CHAN_X11:
+ bufsize = x11_send(c->u.x11.s, p, len);
+ break;
+ case CHAN_SOCKDATA:
+ bufsize = pfd_send(c->u.pfd.s, p, len);
+ break;
+ case CHAN_AGENT:
+ /* Data for an agent message. Buffer it. */
+ while (len > 0) {
+ if (c->u.a.lensofar < 4) {
+ unsigned int l = min(4 - c->u.a.lensofar, (unsigned)len);
+ memcpy(c->u.a.msglen + c->u.a.lensofar, p,
+ l);
+ p += l;
+ len -= l;
+ c->u.a.lensofar += l;
+ }
+ if (c->u.a.lensofar == 4) {
+ c->u.a.totallen =
+ 4 + GET_32BIT(c->u.a.msglen);
+ c->u.a.message = snewn(c->u.a.totallen,
+ unsigned char);
+ memcpy(c->u.a.message, c->u.a.msglen, 4);
+ }
+ if (c->u.a.lensofar >= 4 && len > 0) {
+ unsigned int l =
+ min(c->u.a.totallen - c->u.a.lensofar,
+ (unsigned)len);
+ memcpy(c->u.a.message + c->u.a.lensofar, p,
+ l);
+ p += l;
+ len -= l;
+ c->u.a.lensofar += l;
+ }
+ if (c->u.a.lensofar == c->u.a.totallen) {
+ void *reply;
+ int replylen;
+ c->u.a.outstanding_requests++;
+ if (agent_query(c->u.a.message,
+ c->u.a.totallen,
+ &reply, &replylen,
+ ssh_agentf_callback, c))
+ ssh_agentf_callback(c, reply, replylen);
+ sfree(c->u.a.message);
+ c->u.a.lensofar = 0;
+ }
+ }
+ bufsize = 0; /* agent channels never back up */
+ break;
+ }
+ if (!c->throttling_conn && bufsize > SSH1_BUFFER_LIMIT) {
+ c->throttling_conn = 1;
+ ssh_throttle_conn(ssh, +1);
+ }
+ }
+}
+
+static void ssh1_smsg_exit_status(Ssh ssh, struct Packet *pktin)
+{
+ ssh->exitcode = ssh_pkt_getuint32(pktin);
+ logeventf(ssh, "Server sent command exit status %d", ssh->exitcode);
+ send_packet(ssh, SSH1_CMSG_EXIT_CONFIRMATION, PKT_END);
+ /*
+ * In case `helpful' firewalls or proxies tack
+ * extra human-readable text on the end of the
+ * session which we might mistake for another
+ * encrypted packet, we close the session once
+ * we've sent EXIT_CONFIRMATION.
+ */
+ ssh_disconnect(ssh, NULL, NULL, 0, TRUE);
+}
+
+/* Helper function to deal with sending tty modes for REQUEST_PTY */
+static void ssh1_send_ttymode(void *data, char *mode, char *val)
+{
+ struct Packet *pktout = (struct Packet *)data;
+ int i = 0;
+ unsigned int arg = 0;
+ while (strcmp(mode, ssh_ttymodes[i].mode) != 0) i++;
+ if (i == lenof(ssh_ttymodes)) return;
+ switch (ssh_ttymodes[i].type) {
+ case TTY_OP_CHAR:
+ arg = ssh_tty_parse_specchar(val);
+ break;
+ case TTY_OP_BOOL:
+ arg = ssh_tty_parse_boolean(val);
+ break;
+ }
+ ssh2_pkt_addbyte(pktout, ssh_ttymodes[i].opcode);
+ ssh2_pkt_addbyte(pktout, arg);
+}
+
+
+static void do_ssh1_connection(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin)
+{
+ crBegin(ssh->do_ssh1_connection_crstate);
+
+ ssh->packet_dispatch[SSH1_SMSG_STDOUT_DATA] =
+ ssh->packet_dispatch[SSH1_SMSG_STDERR_DATA] =
+ ssh1_smsg_stdout_stderr_data;
+
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_OPEN_CONFIRMATION] =
+ ssh1_msg_channel_open_confirmation;
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_OPEN_FAILURE] =
+ ssh1_msg_channel_open_failure;
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_CLOSE] =
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION] =
+ ssh1_msg_channel_close;
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_DATA] = ssh1_msg_channel_data;
+ ssh->packet_dispatch[SSH1_SMSG_EXIT_STATUS] = ssh1_smsg_exit_status;
+
+ if (conf_get_int(ssh->conf, CONF_agentfwd) && agent_exists()) {
+ logevent("Requesting agent forwarding");
+ send_packet(ssh, SSH1_CMSG_AGENT_REQUEST_FORWARDING, PKT_END);
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ logevent("Agent forwarding refused");
+ } else {
+ logevent("Agent forwarding enabled");
+ ssh->agentfwd_enabled = TRUE;
+ ssh->packet_dispatch[SSH1_SMSG_AGENT_OPEN] = ssh1_smsg_agent_open;
+ }
+ }
+
+ if (conf_get_int(ssh->conf, CONF_x11_forward) &&
+ (ssh->x11disp = x11_setup_display(conf_get_str(ssh->conf, CONF_x11_display),
+ conf_get_int(ssh->conf, CONF_x11_auth), ssh->conf))) {
+ logevent("Requesting X11 forwarding");
+ /*
+ * Note that while we blank the X authentication data here, we don't
+ * take any special action to blank the start of an X11 channel,
+ * so using MIT-MAGIC-COOKIE-1 and actually opening an X connection
+ * without having session blanking enabled is likely to leak your
+ * cookie into the log.
+ */
+ if (ssh->v1_local_protoflags & SSH1_PROTOFLAG_SCREEN_NUMBER) {
+ send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
+ PKT_STR, ssh->x11disp->remoteauthprotoname,
+ PKTT_PASSWORD,
+ PKT_STR, ssh->x11disp->remoteauthdatastring,
+ PKTT_OTHER,
+ PKT_INT, ssh->x11disp->screennum,
+ PKT_END);
+ } else {
+ send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
+ PKT_STR, ssh->x11disp->remoteauthprotoname,
+ PKTT_PASSWORD,
+ PKT_STR, ssh->x11disp->remoteauthdatastring,
+ PKTT_OTHER,
+ PKT_END);
+ }
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ logevent("X11 forwarding refused");
+ } else {
+ logevent("X11 forwarding enabled");
+ ssh->X11_fwd_enabled = TRUE;
+ ssh->packet_dispatch[SSH1_SMSG_X11_OPEN] = ssh1_smsg_x11_open;
+ }
+ }
+
+ ssh_setup_portfwd(ssh, ssh->conf);
+ ssh->packet_dispatch[SSH1_MSG_PORT_OPEN] = ssh1_msg_port_open;
+
+ if (!conf_get_int(ssh->conf, CONF_nopty)) {
+ struct Packet *pkt;
+ /* Unpick the terminal-speed string. */
+ /* XXX perhaps we should allow no speeds to be sent. */
+ ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
+ sscanf(conf_get_str(ssh->conf, CONF_termspeed), "%d,%d", &ssh->ospeed, &ssh->ispeed);
+ /* Send the pty request. */
+ pkt = ssh1_pkt_init(SSH1_CMSG_REQUEST_PTY);
+ ssh_pkt_addstring(pkt, conf_get_str(ssh->conf, CONF_termtype));
+ ssh_pkt_adduint32(pkt, ssh->term_height);
+ ssh_pkt_adduint32(pkt, ssh->term_width);
+ ssh_pkt_adduint32(pkt, 0); /* width in pixels */
+ ssh_pkt_adduint32(pkt, 0); /* height in pixels */
+ parse_ttymodes(ssh, ssh1_send_ttymode, (void *)pkt);
+ ssh_pkt_addbyte(pkt, SSH1_TTY_OP_ISPEED);
+ ssh_pkt_adduint32(pkt, ssh->ispeed);
+ ssh_pkt_addbyte(pkt, SSH1_TTY_OP_OSPEED);
+ ssh_pkt_adduint32(pkt, ssh->ospeed);
+ ssh_pkt_addbyte(pkt, SSH_TTY_OP_END);
+ s_wrpkt(ssh, pkt);
+ ssh->state = SSH_STATE_INTERMED;
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused to allocate pty\r\n");
+ ssh->editing = ssh->echoing = 1;
+ } else {
+ logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
+ ssh->ospeed, ssh->ispeed);
+ ssh->got_pty = TRUE;
+ }
+ } else {
+ ssh->editing = ssh->echoing = 1;
+ }
+
+ if (conf_get_int(ssh->conf, CONF_compression)) {
+ send_packet(ssh, SSH1_CMSG_REQUEST_COMPRESSION, PKT_INT, 6, PKT_END);
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused to compress\r\n");
+ }
+ logevent("Started compression");
+ ssh->v1_compressing = TRUE;
+ ssh->cs_comp_ctx = zlib_compress_init();
+ logevent("Initialised zlib (RFC1950) compression");
+ ssh->sc_comp_ctx = zlib_decompress_init();
+ logevent("Initialised zlib (RFC1950) decompression");
+ }
+
+ /*
+ * Start the shell or command.
+ *
+ * Special case: if the first-choice command is an SSH-2
+ * subsystem (hence not usable here) and the second choice
+ * exists, we fall straight back to that.
+ */
+ {
+ char *cmd = conf_get_str(ssh->conf, CONF_remote_cmd);
+
+ if (conf_get_int(ssh->conf, CONF_ssh_subsys) &&
+ conf_get_str(ssh->conf, CONF_remote_cmd2)) {
+ cmd = conf_get_str(ssh->conf, CONF_remote_cmd2);
+ ssh->fallback_cmd = TRUE;
+ }
+ if (*cmd)
+ send_packet(ssh, SSH1_CMSG_EXEC_CMD, PKT_STR, cmd, PKT_END);
+ else
+ send_packet(ssh, SSH1_CMSG_EXEC_SHELL, PKT_END);
+ logevent("Started session");
+ }
+
+ ssh->state = SSH_STATE_SESSION;
+ if (ssh->size_needed)
+ ssh_size(ssh, ssh->term_width, ssh->term_height);
+ if (ssh->eof_needed)
+ ssh_special(ssh, TS_EOF);
+
+ if (ssh->ldisc)
+ ldisc_send(ssh->ldisc, NULL, 0, 0);/* cause ldisc to notice changes */
+ ssh->send_ok = 1;
+ ssh->channels = newtree234(ssh_channelcmp);
+ while (1) {
+
+ /*
+ * By this point, most incoming packets are already being
+ * handled by the dispatch table, and we need only pay
+ * attention to the unusual ones.
+ */
+
+ crReturnV;
+ if (pktin) {
+ if (pktin->type == SSH1_SMSG_SUCCESS) {
+ /* may be from EXEC_SHELL on some servers */
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ /* may be from EXEC_SHELL on some servers
+ * if no pty is available or in other odd cases. Ignore */
+ } else {
+ bombout(("Strange packet received: type %d", pktin->type));
+ crStopV;
+ }
+ } else {
+ while (inlen > 0) {
+ int len = min(inlen, 512);
+ send_packet(ssh, SSH1_CMSG_STDIN_DATA,
+ PKT_INT, len, PKTT_DATA, PKT_DATA, in, len,
+ PKTT_OTHER, PKT_END);
+ in += len;
+ inlen -= len;
+ }
+ }
+ }
+
+ crFinishV;
+}
+
+/*
+ * Handle the top-level SSH-2 protocol.
+ */
+static void ssh1_msg_debug(Ssh ssh, struct Packet *pktin)
+{
+ char *msg;
+ int msglen;
+
+ ssh_pkt_getstring(pktin, &msg, &msglen);
+ logeventf(ssh, "Remote debug message: %.*s", msglen, msg);
+}
+
+static void ssh1_msg_disconnect(Ssh ssh, struct Packet *pktin)
+{
+ /* log reason code in disconnect message */
+ char *msg;
+ int msglen;
+
+ ssh_pkt_getstring(pktin, &msg, &msglen);
+ bombout(("Server sent disconnect message:\n\"%.*s\"", msglen, msg));
+}
+
+static void ssh_msg_ignore(Ssh ssh, struct Packet *pktin)
+{
+ /* Do nothing, because we're ignoring it! Duhh. */
+}
+
+static void ssh1_protocol_setup(Ssh ssh)
+{
+ int i;
+
+ /*
+ * Most messages are handled by the coroutines.
+ */
+ for (i = 0; i < 256; i++)
+ ssh->packet_dispatch[i] = NULL;
+
+ /*
+ * These special message types we install handlers for.
+ */
+ ssh->packet_dispatch[SSH1_MSG_DISCONNECT] = ssh1_msg_disconnect;
+ ssh->packet_dispatch[SSH1_MSG_IGNORE] = ssh_msg_ignore;
+ ssh->packet_dispatch[SSH1_MSG_DEBUG] = ssh1_msg_debug;
+}
+
+static void ssh1_protocol(Ssh ssh, void *vin, int inlen,
+ struct Packet *pktin)
+{
+ unsigned char *in=(unsigned char*)vin;
+ if (ssh->state == SSH_STATE_CLOSED)
+ return;
+
+ if (pktin && ssh->packet_dispatch[pktin->type]) {
+ ssh->packet_dispatch[pktin->type](ssh, pktin);
+ return;
+ }
+
+ if (!ssh->protocol_initial_phase_done) {
+ if (do_ssh1_login(ssh, in, inlen, pktin))
+ ssh->protocol_initial_phase_done = TRUE;
+ else
+ return;
+ }
+
+ do_ssh1_connection(ssh, in, inlen, pktin);
+}
+
+/*
+ * Utility routine for decoding comma-separated strings in KEXINIT.
+ */
+static int in_commasep_string(char *needle, char *haystack, int haylen)
+{
+ int needlen;
+ if (!needle || !haystack) /* protect against null pointers */
+ return 0;
+ needlen = strlen(needle);
+ while (1) {
+ /*
+ * Is it at the start of the string?
+ */
+ if (haylen >= needlen && /* haystack is long enough */
+ !memcmp(needle, haystack, needlen) && /* initial match */
+ (haylen == needlen || haystack[needlen] == ',')
+ /* either , or EOS follows */
+ )
+ return 1;
/*
* If not, search for the next comma and resume after that.
* If no comma found, terminate.
}
/*
- * SSH2 key creation method.
+ * Similar routine for checking whether we have the first string in a list.
+ */
+static int first_in_commasep_string(char *needle, char *haystack, int haylen)
+{
+ int needlen;
+ if (!needle || !haystack) /* protect against null pointers */
+ return 0;
+ needlen = strlen(needle);
+ /*
+ * Is it at the start of the string?
+ */
+ if (haylen >= needlen && /* haystack is long enough */
+ !memcmp(needle, haystack, needlen) && /* initial match */
+ (haylen == needlen || haystack[needlen] == ',')
+ /* either , or EOS follows */
+ )
+ return 1;
+ return 0;
+}
+
+
+/*
+ * SSH-2 key creation method.
+ * (Currently assumes 2 lots of any hash are sufficient to generate
+ * keys/IVs for any cipher/MAC. SSH2_MKKEY_ITERS documents this assumption.)
+ */
+#define SSH2_MKKEY_ITERS (2)
+static void ssh2_mkkey(Ssh ssh, Bignum K, unsigned char *H, char chr,
+ unsigned char *keyspace)
+{
+ const struct ssh_hash *h = ssh->kex->hash;
+ void *s;
+ /* First hlen bytes. */
+ s = h->init();
+ if (!(ssh->remote_bugs & BUG_SSH2_DERIVEKEY))
+ hash_mpint(h, s, K);
+ h->bytes(s, H, h->hlen);
+ h->bytes(s, &chr, 1);
+ h->bytes(s, ssh->v2_session_id, ssh->v2_session_id_len);
+ h->final(s, keyspace);
+ /* Next hlen bytes. */
+ s = h->init();
+ if (!(ssh->remote_bugs & BUG_SSH2_DERIVEKEY))
+ hash_mpint(h, s, K);
+ h->bytes(s, H, h->hlen);
+ h->bytes(s, keyspace, h->hlen);
+ h->final(s, keyspace + h->hlen);
+}
+
+/*
+ * Handle the SSH-2 transport layer.
+ */
+static void do_ssh2_transport(Ssh ssh, void *vin, int inlen,
+ struct Packet *pktin)
+{
+ unsigned char *in = (unsigned char *)vin;
+ struct do_ssh2_transport_state {
+ int crLine;
+ int nbits, pbits, warn_kex, warn_cscipher, warn_sccipher;
+ Bignum p, g, e, f, K;
+ void *our_kexinit;
+ int our_kexinitlen;
+ int kex_init_value, kex_reply_value;
+ const struct ssh_mac **maclist;
+ int nmacs;
+ const struct ssh2_cipher *cscipher_tobe;
+ const struct ssh2_cipher *sccipher_tobe;
+ const struct ssh_mac *csmac_tobe;
+ const struct ssh_mac *scmac_tobe;
+ const struct ssh_compress *cscomp_tobe;
+ const struct ssh_compress *sccomp_tobe;
+ char *hostkeydata, *sigdata, *rsakeydata, *keystr, *fingerprint;
+ int hostkeylen, siglen, rsakeylen;
+ void *hkey; /* actual host key */
+ void *rsakey; /* for RSA kex */
+ unsigned char exchange_hash[SSH2_KEX_MAX_HASH_LEN];
+ int n_preferred_kex;
+ const struct ssh_kexes *preferred_kex[KEX_MAX];
+ int n_preferred_ciphers;
+ const struct ssh2_ciphers *preferred_ciphers[CIPHER_MAX];
+ const struct ssh_compress *preferred_comp;
+ int userauth_succeeded; /* for delayed compression */
+ int pending_compression;
+ int got_session_id, activated_authconn;
+ struct Packet *pktout;
+ int dlgret;
+ int guessok;
+ int ignorepkt;
+ };
+ crState(do_ssh2_transport_state);
+
+ crBeginState;
+
+ s->cscipher_tobe = s->sccipher_tobe = NULL;
+ s->csmac_tobe = s->scmac_tobe = NULL;
+ s->cscomp_tobe = s->sccomp_tobe = NULL;
+
+ s->got_session_id = s->activated_authconn = FALSE;
+ s->userauth_succeeded = FALSE;
+ s->pending_compression = FALSE;
+
+ /*
+ * Be prepared to work around the buggy MAC problem.
+ */
+ if (ssh->remote_bugs & BUG_SSH2_HMAC)
+ s->maclist = buggymacs, s->nmacs = lenof(buggymacs);
+ else
+ s->maclist = macs, s->nmacs = lenof(macs);
+
+ begin_key_exchange:
+ ssh->pkt_kctx = SSH2_PKTCTX_NOKEX;
+ {
+ int i, j, k, commalist_started;
+
+ /*
+ * Set up the preferred key exchange. (NULL => warn below here)
+ */
+ s->n_preferred_kex = 0;
+ for (i = 0; i < KEX_MAX; i++) {
+ switch (conf_get_int_int(ssh->conf, CONF_ssh_kexlist, i)) {
+ case KEX_DHGEX:
+ s->preferred_kex[s->n_preferred_kex++] =
+ &ssh_diffiehellman_gex;
+ break;
+ case KEX_DHGROUP14:
+ s->preferred_kex[s->n_preferred_kex++] =
+ &ssh_diffiehellman_group14;
+ break;
+ case KEX_DHGROUP1:
+ s->preferred_kex[s->n_preferred_kex++] =
+ &ssh_diffiehellman_group1;
+ break;
+ case KEX_RSA:
+ s->preferred_kex[s->n_preferred_kex++] =
+ &ssh_rsa_kex;
+ break;
+ case KEX_WARN:
+ /* Flag for later. Don't bother if it's the last in
+ * the list. */
+ if (i < KEX_MAX - 1) {
+ s->preferred_kex[s->n_preferred_kex++] = NULL;
+ }
+ break;
+ }
+ }
+
+ /*
+ * Set up the preferred ciphers. (NULL => warn below here)
+ */
+ s->n_preferred_ciphers = 0;
+ for (i = 0; i < CIPHER_MAX; i++) {
+ switch (conf_get_int_int(ssh->conf, CONF_ssh_cipherlist, i)) {
+ case CIPHER_BLOWFISH:
+ s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_blowfish;
+ break;
+ case CIPHER_DES:
+ if (conf_get_int(ssh->conf, CONF_ssh2_des_cbc)) {
+ s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_des;
+ }
+ break;
+ case CIPHER_3DES:
+ s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_3des;
+ break;
+ case CIPHER_AES:
+ s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_aes;
+ break;
+ case CIPHER_ARCFOUR:
+ s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_arcfour;
+ break;
+ case CIPHER_WARN:
+ /* Flag for later. Don't bother if it's the last in
+ * the list. */
+ if (i < CIPHER_MAX - 1) {
+ s->preferred_ciphers[s->n_preferred_ciphers++] = NULL;
+ }
+ break;
+ }
+ }
+
+ /*
+ * Set up preferred compression.
+ */
+ if (conf_get_int(ssh->conf, CONF_compression))
+ s->preferred_comp = &ssh_zlib;
+ else
+ s->preferred_comp = &ssh_comp_none;
+
+ /*
+ * Enable queueing of outgoing auth- or connection-layer
+ * packets while we are in the middle of a key exchange.
+ */
+ ssh->queueing = TRUE;
+
+ /*
+ * Flag that KEX is in progress.
+ */
+ ssh->kex_in_progress = TRUE;
+
+ /*
+ * Construct and send our key exchange packet.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_KEXINIT);
+ for (i = 0; i < 16; i++)
+ ssh2_pkt_addbyte(s->pktout, (unsigned char) random_byte());
+ /* List key exchange algorithms. */
+ ssh2_pkt_addstring_start(s->pktout);
+ commalist_started = 0;
+ for (i = 0; i < s->n_preferred_kex; i++) {
+ const struct ssh_kexes *k = s->preferred_kex[i];
+ if (!k) continue; /* warning flag */
+ for (j = 0; j < k->nkexes; j++) {
+ if (commalist_started)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, k->list[j]->name);
+ commalist_started = 1;
+ }
+ }
+ /* List server host key algorithms. */
+ ssh2_pkt_addstring_start(s->pktout);
+ for (i = 0; i < lenof(hostkey_algs); i++) {
+ ssh2_pkt_addstring_str(s->pktout, hostkey_algs[i]->name);
+ if (i < lenof(hostkey_algs) - 1)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ }
+ /* List encryption algorithms (client->server then server->client). */
+ for (k = 0; k < 2; k++) {
+ ssh2_pkt_addstring_start(s->pktout);
+ commalist_started = 0;
+ for (i = 0; i < s->n_preferred_ciphers; i++) {
+ const struct ssh2_ciphers *c = s->preferred_ciphers[i];
+ if (!c) continue; /* warning flag */
+ for (j = 0; j < c->nciphers; j++) {
+ if (commalist_started)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, c->list[j]->name);
+ commalist_started = 1;
+ }
+ }
+ }
+ /* List MAC algorithms (client->server then server->client). */
+ for (j = 0; j < 2; j++) {
+ ssh2_pkt_addstring_start(s->pktout);
+ for (i = 0; i < s->nmacs; i++) {
+ ssh2_pkt_addstring_str(s->pktout, s->maclist[i]->name);
+ if (i < s->nmacs - 1)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ }
+ }
+ /* List client->server compression algorithms,
+ * then server->client compression algorithms. (We use the
+ * same set twice.) */
+ for (j = 0; j < 2; j++) {
+ ssh2_pkt_addstring_start(s->pktout);
+ assert(lenof(compressions) > 1);
+ /* Prefer non-delayed versions */
+ ssh2_pkt_addstring_str(s->pktout, s->preferred_comp->name);
+ /* We don't even list delayed versions of algorithms until
+ * they're allowed to be used, to avoid a race. See the end of
+ * this function. */
+ if (s->userauth_succeeded && s->preferred_comp->delayed_name) {
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout,
+ s->preferred_comp->delayed_name);
+ }
+ for (i = 0; i < lenof(compressions); i++) {
+ const struct ssh_compress *c = compressions[i];
+ if (c != s->preferred_comp) {
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, c->name);
+ if (s->userauth_succeeded && c->delayed_name) {
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, c->delayed_name);
+ }
+ }
+ }
+ }
+ /* List client->server languages. Empty list. */
+ ssh2_pkt_addstring_start(s->pktout);
+ /* List server->client languages. Empty list. */
+ ssh2_pkt_addstring_start(s->pktout);
+ /* First KEX packet does _not_ follow, because we're not that brave. */
+ ssh2_pkt_addbool(s->pktout, FALSE);
+ /* Reserved. */
+ ssh2_pkt_adduint32(s->pktout, 0);
+ }
+
+ s->our_kexinitlen = s->pktout->length - 5;
+ s->our_kexinit = snewn(s->our_kexinitlen, unsigned char);
+ memcpy(s->our_kexinit, s->pktout->data + 5, s->our_kexinitlen);
+
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ if (!pktin)
+ crWaitUntilV(pktin);
+
+ /*
+ * Now examine the other side's KEXINIT to see what we're up
+ * to.
+ */
+ {
+ char *str, *preferred;
+ int i, j, len;
+
+ if (pktin->type != SSH2_MSG_KEXINIT) {
+ bombout(("expected key exchange packet from server"));
+ crStopV;
+ }
+ ssh->kex = NULL;
+ ssh->hostkey = NULL;
+ s->cscipher_tobe = NULL;
+ s->sccipher_tobe = NULL;
+ s->csmac_tobe = NULL;
+ s->scmac_tobe = NULL;
+ s->cscomp_tobe = NULL;
+ s->sccomp_tobe = NULL;
+ s->warn_kex = s->warn_cscipher = s->warn_sccipher = FALSE;
+
+ pktin->savedpos += 16; /* skip garbage cookie */
+ ssh_pkt_getstring(pktin, &str, &len); /* key exchange algorithms */
+
+ preferred = NULL;
+ for (i = 0; i < s->n_preferred_kex; i++) {
+ const struct ssh_kexes *k = s->preferred_kex[i];
+ if (!k) {
+ s->warn_kex = TRUE;
+ } else {
+ for (j = 0; j < k->nkexes; j++) {
+ if (!preferred) preferred = k->list[j]->name;
+ if (in_commasep_string(k->list[j]->name, str, len)) {
+ ssh->kex = k->list[j];
+ break;
+ }
+ }
+ }
+ if (ssh->kex)
+ break;
+ }
+ if (!ssh->kex) {
+ bombout(("Couldn't agree a key exchange algorithm (available: %s)",
+ str ? str : "(null)"));
+ crStopV;
+ }
+ /*
+ * Note that the server's guess is considered wrong if it doesn't match
+ * the first algorithm in our list, even if it's still the algorithm
+ * we end up using.
+ */
+ s->guessok = first_in_commasep_string(preferred, str, len);
+ ssh_pkt_getstring(pktin, &str, &len); /* host key algorithms */
+ for (i = 0; i < lenof(hostkey_algs); i++) {
+ if (in_commasep_string(hostkey_algs[i]->name, str, len)) {
+ ssh->hostkey = hostkey_algs[i];
+ break;
+ }
+ }
+ if (!ssh->hostkey) {
+ bombout(("Couldn't agree a host key algorithm (available: %s)",
+ str ? str : "(null)"));
+ crStopV;
+ }
+
+ s->guessok = s->guessok &&
+ first_in_commasep_string(hostkey_algs[0]->name, str, len);
+ ssh_pkt_getstring(pktin, &str, &len); /* client->server cipher */
+ for (i = 0; i < s->n_preferred_ciphers; i++) {
+ const struct ssh2_ciphers *c = s->preferred_ciphers[i];
+ if (!c) {
+ s->warn_cscipher = TRUE;
+ } else {
+ for (j = 0; j < c->nciphers; j++) {
+ if (in_commasep_string(c->list[j]->name, str, len)) {
+ s->cscipher_tobe = c->list[j];
+ break;
+ }
+ }
+ }
+ if (s->cscipher_tobe)
+ break;
+ }
+ if (!s->cscipher_tobe) {
+ bombout(("Couldn't agree a client-to-server cipher (available: %s)",
+ str ? str : "(null)"));
+ crStopV;
+ }
+
+ ssh_pkt_getstring(pktin, &str, &len); /* server->client cipher */
+ for (i = 0; i < s->n_preferred_ciphers; i++) {
+ const struct ssh2_ciphers *c = s->preferred_ciphers[i];
+ if (!c) {
+ s->warn_sccipher = TRUE;
+ } else {
+ for (j = 0; j < c->nciphers; j++) {
+ if (in_commasep_string(c->list[j]->name, str, len)) {
+ s->sccipher_tobe = c->list[j];
+ break;
+ }
+ }
+ }
+ if (s->sccipher_tobe)
+ break;
+ }
+ if (!s->sccipher_tobe) {
+ bombout(("Couldn't agree a server-to-client cipher (available: %s)",
+ str ? str : "(null)"));
+ crStopV;
+ }
+
+ ssh_pkt_getstring(pktin, &str, &len); /* client->server mac */
+ for (i = 0; i < s->nmacs; i++) {
+ if (in_commasep_string(s->maclist[i]->name, str, len)) {
+ s->csmac_tobe = s->maclist[i];
+ break;
+ }
+ }
+ ssh_pkt_getstring(pktin, &str, &len); /* server->client mac */
+ for (i = 0; i < s->nmacs; i++) {
+ if (in_commasep_string(s->maclist[i]->name, str, len)) {
+ s->scmac_tobe = s->maclist[i];
+ break;
+ }
+ }
+ ssh_pkt_getstring(pktin, &str, &len); /* client->server compression */
+ for (i = 0; i < lenof(compressions) + 1; i++) {
+ const struct ssh_compress *c =
+ i == 0 ? s->preferred_comp : compressions[i - 1];
+ if (in_commasep_string(c->name, str, len)) {
+ s->cscomp_tobe = c;
+ break;
+ } else if (in_commasep_string(c->delayed_name, str, len)) {
+ if (s->userauth_succeeded) {
+ s->cscomp_tobe = c;
+ break;
+ } else {
+ s->pending_compression = TRUE; /* try this later */
+ }
+ }
+ }
+ ssh_pkt_getstring(pktin, &str, &len); /* server->client compression */
+ for (i = 0; i < lenof(compressions) + 1; i++) {
+ const struct ssh_compress *c =
+ i == 0 ? s->preferred_comp : compressions[i - 1];
+ if (in_commasep_string(c->name, str, len)) {
+ s->sccomp_tobe = c;
+ break;
+ } else if (in_commasep_string(c->delayed_name, str, len)) {
+ if (s->userauth_succeeded) {
+ s->sccomp_tobe = c;
+ break;
+ } else {
+ s->pending_compression = TRUE; /* try this later */
+ }
+ }
+ }
+ if (s->pending_compression) {
+ logevent("Server supports delayed compression; "
+ "will try this later");
+ }
+ ssh_pkt_getstring(pktin, &str, &len); /* client->server language */
+ ssh_pkt_getstring(pktin, &str, &len); /* server->client language */
+ s->ignorepkt = ssh2_pkt_getbool(pktin) && !s->guessok;
+
+ ssh->exhash = ssh->kex->hash->init();
+ hash_string(ssh->kex->hash, ssh->exhash, ssh->v_c, strlen(ssh->v_c));
+ hash_string(ssh->kex->hash, ssh->exhash, ssh->v_s, strlen(ssh->v_s));
+ hash_string(ssh->kex->hash, ssh->exhash,
+ s->our_kexinit, s->our_kexinitlen);
+ sfree(s->our_kexinit);
+ if (pktin->length > 5)
+ hash_string(ssh->kex->hash, ssh->exhash,
+ pktin->data + 5, pktin->length - 5);
+
+ if (s->warn_kex) {
+ ssh_set_frozen(ssh, 1);
+ s->dlgret = askalg(ssh->frontend, "key-exchange algorithm",
+ ssh->kex->name,
+ ssh_dialog_callback, ssh);
+ if (s->dlgret < 0) {
+ do {
+ crReturnV;
+ if (pktin) {
+ bombout(("Unexpected data from server while"
+ " waiting for user response"));
+ crStopV;
+ }
+ } while (pktin || inlen > 0);
+ s->dlgret = ssh->user_response;
+ }
+ ssh_set_frozen(ssh, 0);
+ if (s->dlgret == 0) {
+ ssh_disconnect(ssh, "User aborted at kex warning", NULL,
+ 0, TRUE);
+ crStopV;
+ }
+ }
+
+ if (s->warn_cscipher) {
+ ssh_set_frozen(ssh, 1);
+ s->dlgret = askalg(ssh->frontend,
+ "client-to-server cipher",
+ s->cscipher_tobe->name,
+ ssh_dialog_callback, ssh);
+ if (s->dlgret < 0) {
+ do {
+ crReturnV;
+ if (pktin) {
+ bombout(("Unexpected data from server while"
+ " waiting for user response"));
+ crStopV;
+ }
+ } while (pktin || inlen > 0);
+ s->dlgret = ssh->user_response;
+ }
+ ssh_set_frozen(ssh, 0);
+ if (s->dlgret == 0) {
+ ssh_disconnect(ssh, "User aborted at cipher warning", NULL,
+ 0, TRUE);
+ crStopV;
+ }
+ }
+
+ if (s->warn_sccipher) {
+ ssh_set_frozen(ssh, 1);
+ s->dlgret = askalg(ssh->frontend,
+ "server-to-client cipher",
+ s->sccipher_tobe->name,
+ ssh_dialog_callback, ssh);
+ if (s->dlgret < 0) {
+ do {
+ crReturnV;
+ if (pktin) {
+ bombout(("Unexpected data from server while"
+ " waiting for user response"));
+ crStopV;
+ }
+ } while (pktin || inlen > 0);
+ s->dlgret = ssh->user_response;
+ }
+ ssh_set_frozen(ssh, 0);
+ if (s->dlgret == 0) {
+ ssh_disconnect(ssh, "User aborted at cipher warning", NULL,
+ 0, TRUE);
+ crStopV;
+ }
+ }
+
+ if (s->ignorepkt) /* first_kex_packet_follows */
+ crWaitUntilV(pktin); /* Ignore packet */
+ }
+
+ if (ssh->kex->main_type == KEXTYPE_DH) {
+ /*
+ * Work out the number of bits of key we will need from the
+ * key exchange. We start with the maximum key length of
+ * either cipher...
+ */
+ {
+ int csbits, scbits;
+
+ csbits = s->cscipher_tobe->keylen;
+ scbits = s->sccipher_tobe->keylen;
+ s->nbits = (csbits > scbits ? csbits : scbits);
+ }
+ /* The keys only have hlen-bit entropy, since they're based on
+ * a hash. So cap the key size at hlen bits. */
+ if (s->nbits > ssh->kex->hash->hlen * 8)
+ s->nbits = ssh->kex->hash->hlen * 8;
+
+ /*
+ * If we're doing Diffie-Hellman group exchange, start by
+ * requesting a group.
+ */
+ if (!ssh->kex->pdata) {
+ logevent("Doing Diffie-Hellman group exchange");
+ ssh->pkt_kctx = SSH2_PKTCTX_DHGEX;
+ /*
+ * Work out how big a DH group we will need to allow that
+ * much data.
+ */
+ s->pbits = 512 << ((s->nbits - 1) / 64);
+ s->pktout = ssh2_pkt_init(SSH2_MSG_KEX_DH_GEX_REQUEST);
+ ssh2_pkt_adduint32(s->pktout, s->pbits);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_KEX_DH_GEX_GROUP) {
+ bombout(("expected key exchange group packet from server"));
+ crStopV;
+ }
+ s->p = ssh2_pkt_getmp(pktin);
+ s->g = ssh2_pkt_getmp(pktin);
+ if (!s->p || !s->g) {
+ bombout(("unable to read mp-ints from incoming group packet"));
+ crStopV;
+ }
+ ssh->kex_ctx = dh_setup_gex(s->p, s->g);
+ s->kex_init_value = SSH2_MSG_KEX_DH_GEX_INIT;
+ s->kex_reply_value = SSH2_MSG_KEX_DH_GEX_REPLY;
+ } else {
+ ssh->pkt_kctx = SSH2_PKTCTX_DHGROUP;
+ ssh->kex_ctx = dh_setup_group(ssh->kex);
+ s->kex_init_value = SSH2_MSG_KEXDH_INIT;
+ s->kex_reply_value = SSH2_MSG_KEXDH_REPLY;
+ logeventf(ssh, "Using Diffie-Hellman with standard group \"%s\"",
+ ssh->kex->groupname);
+ }
+
+ logeventf(ssh, "Doing Diffie-Hellman key exchange with hash %s",
+ ssh->kex->hash->text_name);
+ /*
+ * Now generate and send e for Diffie-Hellman.
+ */
+ set_busy_status(ssh->frontend, BUSY_CPU); /* this can take a while */
+ s->e = dh_create_e(ssh->kex_ctx, s->nbits * 2);
+ s->pktout = ssh2_pkt_init(s->kex_init_value);
+ ssh2_pkt_addmp(s->pktout, s->e);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ set_busy_status(ssh->frontend, BUSY_WAITING); /* wait for server */
+ crWaitUntilV(pktin);
+ if (pktin->type != s->kex_reply_value) {
+ bombout(("expected key exchange reply packet from server"));
+ crStopV;
+ }
+ set_busy_status(ssh->frontend, BUSY_CPU); /* cogitate */
+ ssh_pkt_getstring(pktin, &s->hostkeydata, &s->hostkeylen);
+ s->hkey = ssh->hostkey->newkey(s->hostkeydata, s->hostkeylen);
+ s->f = ssh2_pkt_getmp(pktin);
+ if (!s->f) {
+ bombout(("unable to parse key exchange reply packet"));
+ crStopV;
+ }
+ ssh_pkt_getstring(pktin, &s->sigdata, &s->siglen);
+
+ s->K = dh_find_K(ssh->kex_ctx, s->f);
+
+ /* We assume everything from now on will be quick, and it might
+ * involve user interaction. */
+ set_busy_status(ssh->frontend, BUSY_NOT);
+
+ hash_string(ssh->kex->hash, ssh->exhash, s->hostkeydata, s->hostkeylen);
+ if (!ssh->kex->pdata) {
+ hash_uint32(ssh->kex->hash, ssh->exhash, s->pbits);
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->p);
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->g);
+ }
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->e);
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->f);
+
+ dh_cleanup(ssh->kex_ctx);
+ freebn(s->f);
+ if (!ssh->kex->pdata) {
+ freebn(s->g);
+ freebn(s->p);
+ }
+ } else {
+ logeventf(ssh, "Doing RSA key exchange with hash %s",
+ ssh->kex->hash->text_name);
+ ssh->pkt_kctx = SSH2_PKTCTX_RSAKEX;
+ /*
+ * RSA key exchange. First expect a KEXRSA_PUBKEY packet
+ * from the server.
+ */
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_KEXRSA_PUBKEY) {
+ bombout(("expected RSA public key packet from server"));
+ crStopV;
+ }
+
+ ssh_pkt_getstring(pktin, &s->hostkeydata, &s->hostkeylen);
+ hash_string(ssh->kex->hash, ssh->exhash,
+ s->hostkeydata, s->hostkeylen);
+ s->hkey = ssh->hostkey->newkey(s->hostkeydata, s->hostkeylen);
+
+ {
+ char *keydata;
+ ssh_pkt_getstring(pktin, &keydata, &s->rsakeylen);
+ s->rsakeydata = snewn(s->rsakeylen, char);
+ memcpy(s->rsakeydata, keydata, s->rsakeylen);
+ }
+
+ s->rsakey = ssh_rsakex_newkey(s->rsakeydata, s->rsakeylen);
+ if (!s->rsakey) {
+ sfree(s->rsakeydata);
+ bombout(("unable to parse RSA public key from server"));
+ crStopV;
+ }
+
+ hash_string(ssh->kex->hash, ssh->exhash, s->rsakeydata, s->rsakeylen);
+
+ /*
+ * Next, set up a shared secret K, of precisely KLEN -
+ * 2*HLEN - 49 bits, where KLEN is the bit length of the
+ * RSA key modulus and HLEN is the bit length of the hash
+ * we're using.
+ */
+ {
+ int klen = ssh_rsakex_klen(s->rsakey);
+ int nbits = klen - (2*ssh->kex->hash->hlen*8 + 49);
+ int i, byte = 0;
+ unsigned char *kstr1, *kstr2, *outstr;
+ int kstr1len, kstr2len, outstrlen;
+
+ s->K = bn_power_2(nbits - 1);
+
+ for (i = 0; i < nbits; i++) {
+ if ((i & 7) == 0) {
+ byte = random_byte();
+ }
+ bignum_set_bit(s->K, i, (byte >> (i & 7)) & 1);
+ }
+
+ /*
+ * Encode this as an mpint.
+ */
+ kstr1 = ssh2_mpint_fmt(s->K, &kstr1len);
+ kstr2 = snewn(kstr2len = 4 + kstr1len, unsigned char);
+ PUT_32BIT(kstr2, kstr1len);
+ memcpy(kstr2 + 4, kstr1, kstr1len);
+
+ /*
+ * Encrypt it with the given RSA key.
+ */
+ outstrlen = (klen + 7) / 8;
+ outstr = snewn(outstrlen, unsigned char);
+ ssh_rsakex_encrypt(ssh->kex->hash, kstr2, kstr2len,
+ outstr, outstrlen, s->rsakey);
+
+ /*
+ * And send it off in a return packet.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_KEXRSA_SECRET);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, (char *)outstr, outstrlen);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ hash_string(ssh->kex->hash, ssh->exhash, outstr, outstrlen);
+
+ sfree(kstr2);
+ sfree(kstr1);
+ sfree(outstr);
+ }
+
+ ssh_rsakex_freekey(s->rsakey);
+
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_KEXRSA_DONE) {
+ sfree(s->rsakeydata);
+ bombout(("expected signature packet from server"));
+ crStopV;
+ }
+
+ ssh_pkt_getstring(pktin, &s->sigdata, &s->siglen);
+
+ sfree(s->rsakeydata);
+ }
+
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->K);
+ assert(ssh->kex->hash->hlen <= sizeof(s->exchange_hash));
+ ssh->kex->hash->final(ssh->exhash, s->exchange_hash);
+
+ ssh->kex_ctx = NULL;
+
+#if 0
+ debug(("Exchange hash is:\n"));
+ dmemdump(s->exchange_hash, ssh->kex->hash->hlen);
+#endif
+
+ if (!s->hkey ||
+ !ssh->hostkey->verifysig(s->hkey, s->sigdata, s->siglen,
+ (char *)s->exchange_hash,
+ ssh->kex->hash->hlen)) {
+ bombout(("Server's host key did not match the signature supplied"));
+ crStopV;
+ }
+
+ /*
+ * Authenticate remote host: verify host key. (We've already
+ * checked the signature of the exchange hash.)
+ */
+ s->keystr = ssh->hostkey->fmtkey(s->hkey);
+ s->fingerprint = ssh->hostkey->fingerprint(s->hkey);
+ ssh_set_frozen(ssh, 1);
+ s->dlgret = verify_ssh_host_key(ssh->frontend,
+ ssh->savedhost, ssh->savedport,
+ ssh->hostkey->keytype, s->keystr,
+ s->fingerprint,
+ ssh_dialog_callback, ssh);
+ if (s->dlgret < 0) {
+ do {
+ crReturnV;
+ if (pktin) {
+ bombout(("Unexpected data from server while waiting"
+ " for user host key response"));
+ crStopV;
+ }
+ } while (pktin || inlen > 0);
+ s->dlgret = ssh->user_response;
+ }
+ ssh_set_frozen(ssh, 0);
+ if (s->dlgret == 0) {
+ ssh_disconnect(ssh, "User aborted at host key verification", NULL,
+ 0, TRUE);
+ crStopV;
+ }
+ if (!s->got_session_id) { /* don't bother logging this in rekeys */
+ logevent("Host key fingerprint is:");
+ logevent(s->fingerprint);
+ }
+ sfree(s->fingerprint);
+ sfree(s->keystr);
+ ssh->hostkey->freekey(s->hkey);
+
+ /*
+ * The exchange hash from the very first key exchange is also
+ * the session id, used in session key construction and
+ * authentication.
+ */
+ if (!s->got_session_id) {
+ assert(sizeof(s->exchange_hash) <= sizeof(ssh->v2_session_id));
+ memcpy(ssh->v2_session_id, s->exchange_hash,
+ sizeof(s->exchange_hash));
+ ssh->v2_session_id_len = ssh->kex->hash->hlen;
+ assert(ssh->v2_session_id_len <= sizeof(ssh->v2_session_id));
+ s->got_session_id = TRUE;
+ }
+
+ /*
+ * Send SSH2_MSG_NEWKEYS.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_NEWKEYS);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+ ssh->outgoing_data_size = 0; /* start counting from here */
+
+ /*
+ * We've sent client NEWKEYS, so create and initialise
+ * client-to-server session keys.
+ */
+ if (ssh->cs_cipher_ctx)
+ ssh->cscipher->free_context(ssh->cs_cipher_ctx);
+ ssh->cscipher = s->cscipher_tobe;
+ ssh->cs_cipher_ctx = ssh->cscipher->make_context();
+
+ if (ssh->cs_mac_ctx)
+ ssh->csmac->free_context(ssh->cs_mac_ctx);
+ ssh->csmac = s->csmac_tobe;
+ ssh->cs_mac_ctx = ssh->csmac->make_context();
+
+ if (ssh->cs_comp_ctx)
+ ssh->cscomp->compress_cleanup(ssh->cs_comp_ctx);
+ ssh->cscomp = s->cscomp_tobe;
+ ssh->cs_comp_ctx = ssh->cscomp->compress_init();
+
+ /*
+ * Set IVs on client-to-server keys. Here we use the exchange
+ * hash from the _first_ key exchange.
+ */
+ {
+ unsigned char keyspace[SSH2_KEX_MAX_HASH_LEN * SSH2_MKKEY_ITERS];
+ assert(sizeof(keyspace) >= ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,'C',keyspace);
+ assert((ssh->cscipher->keylen+7) / 8 <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
+ ssh->cscipher->setkey(ssh->cs_cipher_ctx, keyspace);
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,'A',keyspace);
+ assert(ssh->cscipher->blksize <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
+ ssh->cscipher->setiv(ssh->cs_cipher_ctx, keyspace);
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,'E',keyspace);
+ assert(ssh->csmac->len <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
+ ssh->csmac->setkey(ssh->cs_mac_ctx, keyspace);
+ smemclr(keyspace, sizeof(keyspace));
+ }
+
+ logeventf(ssh, "Initialised %.200s client->server encryption",
+ ssh->cscipher->text_name);
+ logeventf(ssh, "Initialised %.200s client->server MAC algorithm",
+ ssh->csmac->text_name);
+ if (ssh->cscomp->text_name)
+ logeventf(ssh, "Initialised %s compression",
+ ssh->cscomp->text_name);
+
+ /*
+ * Now our end of the key exchange is complete, we can send all
+ * our queued higher-layer packets.
+ */
+ ssh->queueing = FALSE;
+ ssh2_pkt_queuesend(ssh);
+
+ /*
+ * Expect SSH2_MSG_NEWKEYS from server.
+ */
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_NEWKEYS) {
+ bombout(("expected new-keys packet from server"));
+ crStopV;
+ }
+ ssh->incoming_data_size = 0; /* start counting from here */
+
+ /*
+ * We've seen server NEWKEYS, so create and initialise
+ * server-to-client session keys.
+ */
+ if (ssh->sc_cipher_ctx)
+ ssh->sccipher->free_context(ssh->sc_cipher_ctx);
+ ssh->sccipher = s->sccipher_tobe;
+ ssh->sc_cipher_ctx = ssh->sccipher->make_context();
+
+ if (ssh->sc_mac_ctx)
+ ssh->scmac->free_context(ssh->sc_mac_ctx);
+ ssh->scmac = s->scmac_tobe;
+ ssh->sc_mac_ctx = ssh->scmac->make_context();
+
+ if (ssh->sc_comp_ctx)
+ ssh->sccomp->decompress_cleanup(ssh->sc_comp_ctx);
+ ssh->sccomp = s->sccomp_tobe;
+ ssh->sc_comp_ctx = ssh->sccomp->decompress_init();
+
+ /*
+ * Set IVs on server-to-client keys. Here we use the exchange
+ * hash from the _first_ key exchange.
+ */
+ {
+ unsigned char keyspace[SSH2_KEX_MAX_HASH_LEN * SSH2_MKKEY_ITERS];
+ assert(sizeof(keyspace) >= ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,'D',keyspace);
+ assert((ssh->sccipher->keylen+7) / 8 <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
+ ssh->sccipher->setkey(ssh->sc_cipher_ctx, keyspace);
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,'B',keyspace);
+ assert(ssh->sccipher->blksize <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
+ ssh->sccipher->setiv(ssh->sc_cipher_ctx, keyspace);
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,'F',keyspace);
+ assert(ssh->scmac->len <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
+ ssh->scmac->setkey(ssh->sc_mac_ctx, keyspace);
+ smemclr(keyspace, sizeof(keyspace));
+ }
+ logeventf(ssh, "Initialised %.200s server->client encryption",
+ ssh->sccipher->text_name);
+ logeventf(ssh, "Initialised %.200s server->client MAC algorithm",
+ ssh->scmac->text_name);
+ if (ssh->sccomp->text_name)
+ logeventf(ssh, "Initialised %s decompression",
+ ssh->sccomp->text_name);
+
+ /*
+ * Free shared secret.
+ */
+ freebn(s->K);
+
+ /*
+ * Key exchange is over. Loop straight back round if we have a
+ * deferred rekey reason.
+ */
+ if (ssh->deferred_rekey_reason) {
+ logevent(ssh->deferred_rekey_reason);
+ pktin = NULL;
+ ssh->deferred_rekey_reason = NULL;
+ goto begin_key_exchange;
+ }
+
+ /*
+ * Otherwise, schedule a timer for our next rekey.
+ */
+ ssh->kex_in_progress = FALSE;
+ ssh->last_rekey = GETTICKCOUNT();
+ if (conf_get_int(ssh->conf, CONF_ssh_rekey_time) != 0)
+ ssh->next_rekey = schedule_timer(conf_get_int(ssh->conf, CONF_ssh_rekey_time)*60*TICKSPERSEC,
+ ssh2_timer, ssh);
+
+ /*
+ * Now we're encrypting. Begin returning 1 to the protocol main
+ * function so that other things can run on top of the
+ * transport. If we ever see a KEXINIT, we must go back to the
+ * start.
+ *
+ * We _also_ go back to the start if we see pktin==NULL and
+ * inlen negative, because this is a special signal meaning
+ * `initiate client-driven rekey', and `in' contains a message
+ * giving the reason for the rekey.
+ *
+ * inlen==-1 means always initiate a rekey;
+ * inlen==-2 means that userauth has completed successfully and
+ * we should consider rekeying (for delayed compression).
+ */
+ while (!((pktin && pktin->type == SSH2_MSG_KEXINIT) ||
+ (!pktin && inlen < 0))) {
+ wait_for_rekey:
+ if (!ssh->protocol_initial_phase_done) {
+ ssh->protocol_initial_phase_done = TRUE;
+ /*
+ * Allow authconn to initialise itself.
+ */
+ do_ssh2_authconn(ssh, NULL, 0, NULL);
+ }
+ crReturnV;
+ }
+ if (pktin) {
+ logevent("Server initiated key re-exchange");
+ } else {
+ if (inlen == -2) {
+ /*
+ * authconn has seen a USERAUTH_SUCCEEDED. Time to enable
+ * delayed compression, if it's available.
+ *
+ * draft-miller-secsh-compression-delayed-00 says that you
+ * negotiate delayed compression in the first key exchange, and
+ * both sides start compressing when the server has sent
+ * USERAUTH_SUCCESS. This has a race condition -- the server
+ * can't know when the client has seen it, and thus which incoming
+ * packets it should treat as compressed.
+ *
+ * Instead, we do the initial key exchange without offering the
+ * delayed methods, but note if the server offers them; when we
+ * get here, if a delayed method was available that was higher
+ * on our list than what we got, we initiate a rekey in which we
+ * _do_ list the delayed methods (and hopefully get it as a
+ * result). Subsequent rekeys will do the same.
+ */
+ assert(!s->userauth_succeeded); /* should only happen once */
+ s->userauth_succeeded = TRUE;
+ if (!s->pending_compression)
+ /* Can't see any point rekeying. */
+ goto wait_for_rekey; /* this is utterly horrid */
+ /* else fall through to rekey... */
+ s->pending_compression = FALSE;
+ }
+ /*
+ * Now we've decided to rekey.
+ *
+ * Special case: if the server bug is set that doesn't
+ * allow rekeying, we give a different log message and
+ * continue waiting. (If such a server _initiates_ a rekey,
+ * we process it anyway!)
+ */
+ if ((ssh->remote_bugs & BUG_SSH2_REKEY)) {
+ logeventf(ssh, "Server bug prevents key re-exchange (%s)",
+ (char *)in);
+ /* Reset the counters, so that at least this message doesn't
+ * hit the event log _too_ often. */
+ ssh->outgoing_data_size = 0;
+ ssh->incoming_data_size = 0;
+ if (conf_get_int(ssh->conf, CONF_ssh_rekey_time) != 0) {
+ ssh->next_rekey =
+ schedule_timer(conf_get_int(ssh->conf, CONF_ssh_rekey_time)*60*TICKSPERSEC,
+ ssh2_timer, ssh);
+ }
+ goto wait_for_rekey; /* this is still utterly horrid */
+ } else {
+ logeventf(ssh, "Initiating key re-exchange (%s)", (char *)in);
+ }
+ }
+ goto begin_key_exchange;
+
+ crFinishV;
+}
+
+/*
+ * Add data to an SSH-2 channel output buffer.
+ */
+static void ssh2_add_channel_data(struct ssh_channel *c, char *buf,
+ int len)
+{
+ bufchain_add(&c->v.v2.outbuffer, buf, len);
+}
+
+/*
+ * Attempt to send data on an SSH-2 channel.
+ */
+static int ssh2_try_send(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ int ret;
+
+ while (c->v.v2.remwindow > 0 && bufchain_size(&c->v.v2.outbuffer) > 0) {
+ int len;
+ void *data;
+ bufchain_prefix(&c->v.v2.outbuffer, &data, &len);
+ if ((unsigned)len > c->v.v2.remwindow)
+ len = c->v.v2.remwindow;
+ if ((unsigned)len > c->v.v2.remmaxpkt)
+ len = c->v.v2.remmaxpkt;
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_DATA);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_addstring_start(pktout);
+ dont_log_data(ssh, pktout, PKTLOG_OMIT);
+ ssh2_pkt_addstring_data(pktout, data, len);
+ end_log_omission(ssh, pktout);
+ ssh2_pkt_send(ssh, pktout);
+ bufchain_consume(&c->v.v2.outbuffer, len);
+ c->v.v2.remwindow -= len;
+ }
+
+ /*
+ * After having sent as much data as we can, return the amount
+ * still buffered.
+ */
+ ret = bufchain_size(&c->v.v2.outbuffer);
+
+ /*
+ * And if there's no data pending but we need to send an EOF, send
+ * it.
+ */
+ if (!ret && c->pending_eof)
+ ssh_channel_try_eof(c);
+
+ return ret;
+}
+
+static void ssh2_try_send_and_unthrottle(Ssh ssh, struct ssh_channel *c)
+{
+ int bufsize;
+ if (c->closes & CLOSES_SENT_EOF)
+ return; /* don't send on channels we've EOFed */
+ bufsize = ssh2_try_send(c);
+ if (bufsize == 0) {
+ switch (c->type) {
+ case CHAN_MAINSESSION:
+ /* stdin need not receive an unthrottle
+ * notification since it will be polled */
+ break;
+ case CHAN_X11:
+ x11_unthrottle(c->u.x11.s);
+ break;
+ case CHAN_AGENT:
+ /* agent sockets are request/response and need no
+ * buffer management */
+ break;
+ case CHAN_SOCKDATA:
+ pfd_unthrottle(c->u.pfd.s);
+ break;
+ }
+ }
+}
+
+/*
+ * Set up most of a new ssh_channel for SSH-2.
+ */
+static void ssh2_channel_init(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+ c->localid = alloc_channel_id(ssh);
+ c->closes = 0;
+ c->pending_eof = FALSE;
+ c->throttling_conn = FALSE;
+ c->v.v2.locwindow = c->v.v2.locmaxwin = c->v.v2.remlocwin =
+ conf_get_int(ssh->conf, CONF_ssh_simple) ? OUR_V2_BIGWIN : OUR_V2_WINSIZE;
+ c->v.v2.chanreq_head = NULL;
+ c->v.v2.throttle_state = UNTHROTTLED;
+ bufchain_init(&c->v.v2.outbuffer);
+}
+
+/*
+ * Construct the common parts of a CHANNEL_OPEN.
+ */
+static struct Packet *ssh2_chanopen_init(struct ssh_channel *c, char *type)
+{
+ struct Packet *pktout;
+
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
+ ssh2_pkt_addstring(pktout, type);
+ ssh2_pkt_adduint32(pktout, c->localid);
+ ssh2_pkt_adduint32(pktout, c->v.v2.locwindow);/* our window size */
+ ssh2_pkt_adduint32(pktout, OUR_V2_MAXPKT); /* our max pkt size */
+ return pktout;
+}
+
+/*
+ * CHANNEL_FAILURE doesn't come with any indication of what message
+ * caused it, so we have to keep track of the outstanding
+ * CHANNEL_REQUESTs ourselves.
*/
-static void ssh2_mkkey(Bignum K, char *H, char *sessid, char chr,
- char *keyspace)
-{
- SHA_State s;
- /* First 20 bytes. */
- SHA_Init(&s);
- if (!(ssh_remote_bugs & BUG_SSH2_DERIVEKEY))
- sha_mpint(&s, K);
- SHA_Bytes(&s, H, 20);
- SHA_Bytes(&s, &chr, 1);
- SHA_Bytes(&s, sessid, 20);
- SHA_Final(&s, keyspace);
- /* Next 20 bytes. */
- SHA_Init(&s);
- if (!(ssh_remote_bugs & BUG_SSH2_DERIVEKEY))
- sha_mpint(&s, K);
- SHA_Bytes(&s, H, 20);
- SHA_Bytes(&s, keyspace, 20);
- SHA_Final(&s, keyspace + 20);
+static void ssh2_queue_chanreq_handler(struct ssh_channel *c,
+ cchandler_fn_t handler, void *ctx)
+{
+ struct outstanding_channel_request *ocr =
+ snew(struct outstanding_channel_request);
+
+ assert(!(c->closes & (CLOSES_SENT_CLOSE | CLOSES_RCVD_CLOSE)));
+ ocr->handler = handler;
+ ocr->ctx = ctx;
+ ocr->next = NULL;
+ if (!c->v.v2.chanreq_head)
+ c->v.v2.chanreq_head = ocr;
+ else
+ c->v.v2.chanreq_tail->next = ocr;
+ c->v.v2.chanreq_tail = ocr;
}
/*
- * Handle the SSH2 transport layer.
+ * Construct the common parts of a CHANNEL_REQUEST. If handler is not
+ * NULL then a reply will be requested and the handler will be called
+ * when it arrives. The returned packet is ready to have any
+ * request-specific data added and be sent. Note that if a handler is
+ * provided, it's essential that the request actually be sent.
+ *
+ * The handler will usually be passed the response packet in pktin.
+ * If pktin is NULL, this means that no reply will ever be forthcoming
+ * (e.g. because the entire connection is being destroyed) and the
+ * handler should free any storage it's holding.
*/
-static int do_ssh2_transport(unsigned char *in, int inlen, int ispkt)
-{
- static int i, j, len, nbits, pbits, warn;
- static char *str;
- static Bignum p, g, e, f, K;
- static int kex_init_value, kex_reply_value;
- static const struct ssh_mac **maclist;
- static int nmacs;
- static const struct ssh2_cipher *cscipher_tobe = NULL;
- static const struct ssh2_cipher *sccipher_tobe = NULL;
- static const struct ssh_mac *csmac_tobe = NULL;
- static const struct ssh_mac *scmac_tobe = NULL;
- static const struct ssh_compress *cscomp_tobe = NULL;
- static const struct ssh_compress *sccomp_tobe = NULL;
- static char *hostkeydata, *sigdata, *keystr, *fingerprint;
- static int hostkeylen, siglen;
- static void *hkey; /* actual host key */
- static unsigned char exchange_hash[20];
- static unsigned char keyspace[40];
- static int n_preferred_ciphers;
- static const struct ssh2_ciphers *preferred_ciphers[CIPHER_MAX];
- static const struct ssh_compress *preferred_comp;
- static int cipherstr_started;
- static int first_kex;
-
- crBegin;
- random_init();
- first_kex = 1;
+static struct Packet *ssh2_chanreq_init(struct ssh_channel *c, char *type,
+ cchandler_fn_t handler, void *ctx)
+{
+ struct Packet *pktout;
+
+ assert(!(c->closes & (CLOSES_SENT_CLOSE | CLOSES_RCVD_CLOSE)));
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_addstring(pktout, type);
+ ssh2_pkt_addbool(pktout, handler != NULL);
+ if (handler != NULL)
+ ssh2_queue_chanreq_handler(c, handler, ctx);
+ return pktout;
+}
- /*
- * Set up the preferred ciphers. (NULL => warn below here)
- */
- n_preferred_ciphers = 0;
- for (i = 0; i < CIPHER_MAX; i++) {
- switch (cfg.ssh_cipherlist[i]) {
- case CIPHER_BLOWFISH:
- preferred_ciphers[n_preferred_ciphers] = &ssh2_blowfish;
- n_preferred_ciphers++;
- break;
- case CIPHER_DES:
- if (cfg.ssh2_des_cbc) {
- preferred_ciphers[n_preferred_ciphers] = &ssh2_des;
- n_preferred_ciphers++;
- }
- break;
- case CIPHER_3DES:
- preferred_ciphers[n_preferred_ciphers] = &ssh2_3des;
- n_preferred_ciphers++;
- break;
- case CIPHER_AES:
- preferred_ciphers[n_preferred_ciphers] = &ssh2_aes;
- n_preferred_ciphers++;
- break;
- case CIPHER_WARN:
- /* Flag for later. Don't bother if it's the last in
- * the list. */
- if (i < CIPHER_MAX - 1) {
- preferred_ciphers[n_preferred_ciphers] = NULL;
- n_preferred_ciphers++;
- }
- break;
- }
- }
+/*
+ * Potentially enlarge the window on an SSH-2 channel.
+ */
+static void ssh2_handle_winadj_response(struct ssh_channel *, struct Packet *,
+ void *);
+static void ssh2_set_window(struct ssh_channel *c, int newwin)
+{
+ Ssh ssh = c->ssh;
/*
- * Set up preferred compression.
+ * Never send WINDOW_ADJUST for a channel that the remote side has
+ * already sent EOF on; there's no point, since it won't be
+ * sending any more data anyway. Ditto if _we've_ already sent
+ * CLOSE.
*/
- if (cfg.compression)
- preferred_comp = &ssh_zlib;
- else
- preferred_comp = &ssh_comp_none;
+ if (c->closes & (CLOSES_RCVD_EOF | CLOSES_SENT_CLOSE))
+ return;
/*
- * Be prepared to work around the buggy MAC problem.
+ * If the remote end has a habit of ignoring maxpkt, limit the
+ * window so that it has no choice (assuming it doesn't ignore the
+ * window as well).
*/
- if (ssh_remote_bugs & BUG_SSH2_HMAC)
- maclist = buggymacs, nmacs = lenof(buggymacs);
- else
- maclist = macs, nmacs = lenof(macs);
+ if ((ssh->remote_bugs & BUG_SSH2_MAXPKT) && newwin > OUR_V2_MAXPKT)
+ newwin = OUR_V2_MAXPKT;
- begin_key_exchange:
/*
- * Construct and send our key exchange packet.
+ * Only send a WINDOW_ADJUST if there's significantly more window
+ * available than the other end thinks there is. This saves us
+ * sending a WINDOW_ADJUST for every character in a shell session.
+ *
+ * "Significant" is arbitrarily defined as half the window size.
*/
- ssh2_pkt_init(SSH2_MSG_KEXINIT);
- for (i = 0; i < 16; i++)
- ssh2_pkt_addbyte((unsigned char) random_byte());
- /* List key exchange algorithms. */
- ssh2_pkt_addstring_start();
- for (i = 0; i < lenof(kex_algs); i++) {
- if (kex_algs[i] == &ssh_diffiehellman_gex &&
- (ssh_remote_bugs & BUG_SSH2_DH_GEX))
- continue;
- ssh2_pkt_addstring_str(kex_algs[i]->name);
- if (i < lenof(kex_algs) - 1)
- ssh2_pkt_addstring_str(",");
- }
- /* List server host key algorithms. */
- ssh2_pkt_addstring_start();
- for (i = 0; i < lenof(hostkey_algs); i++) {
- ssh2_pkt_addstring_str(hostkey_algs[i]->name);
- if (i < lenof(hostkey_algs) - 1)
- ssh2_pkt_addstring_str(",");
- }
- /* List client->server encryption algorithms. */
- ssh2_pkt_addstring_start();
- cipherstr_started = 0;
- for (i = 0; i < n_preferred_ciphers; i++) {
- const struct ssh2_ciphers *c = preferred_ciphers[i];
- if (!c) continue; /* warning flag */
- for (j = 0; j < c->nciphers; j++) {
- if (cipherstr_started)
- ssh2_pkt_addstring_str(",");
- ssh2_pkt_addstring_str(c->list[j]->name);
- cipherstr_started = 1;
+ if (newwin / 2 >= c->v.v2.locwindow) {
+ struct Packet *pktout;
+ unsigned *up;
+
+ /*
+ * In order to keep track of how much window the client
+ * actually has available, we'd like it to acknowledge each
+ * WINDOW_ADJUST. We can't do that directly, so we accompany
+ * it with a CHANNEL_REQUEST that has to be acknowledged.
+ *
+ * This is only necessary if we're opening the window wide.
+ * If we're not, then throughput is being constrained by
+ * something other than the maximum window size anyway.
+ */
+ if (newwin == c->v.v2.locmaxwin &&
+ !(ssh->remote_bugs & BUG_CHOKES_ON_WINADJ)) {
+ up = snew(unsigned);
+ *up = newwin - c->v.v2.locwindow;
+ pktout = ssh2_chanreq_init(c, "winadj@putty.projects.tartarus.org",
+ ssh2_handle_winadj_response, up);
+ ssh2_pkt_send(ssh, pktout);
+
+ if (c->v.v2.throttle_state != UNTHROTTLED)
+ c->v.v2.throttle_state = UNTHROTTLING;
+ } else {
+ /* Pretend the WINDOW_ADJUST was acked immediately. */
+ c->v.v2.remlocwin = newwin;
+ c->v.v2.throttle_state = THROTTLED;
}
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_WINDOW_ADJUST);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_adduint32(pktout, newwin - c->v.v2.locwindow);
+ ssh2_pkt_send(ssh, pktout);
+ c->v.v2.locwindow = newwin;
}
- /* List server->client encryption algorithms. */
- ssh2_pkt_addstring_start();
- cipherstr_started = 0;
- for (i = 0; i < n_preferred_ciphers; i++) {
- const struct ssh2_ciphers *c = preferred_ciphers[i];
- if (!c) continue; /* warning flag */
- for (j = 0; j < c->nciphers; j++) {
- if (cipherstr_started)
- ssh2_pkt_addstring_str(",");
- ssh2_pkt_addstring_str(c->list[j]->name);
- cipherstr_started = 1;
- }
+}
+
+/*
+ * Find the channel associated with a message. If there's no channel,
+ * or it's not properly open, make a noise about it and return NULL.
+ */
+static struct ssh_channel *ssh2_channel_msg(Ssh ssh, struct Packet *pktin)
+{
+ unsigned localid = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+
+ c = find234(ssh->channels, &localid, ssh_channelfind);
+ if (!c ||
+ (c->halfopen && pktin->type != SSH2_MSG_CHANNEL_OPEN_CONFIRMATION &&
+ pktin->type != SSH2_MSG_CHANNEL_OPEN_FAILURE)) {
+ char *buf = dupprintf("Received %s for %s channel %u",
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx,
+ pktin->type),
+ c ? "half-open" : "nonexistent", localid);
+ ssh_disconnect(ssh, NULL, buf, SSH2_DISCONNECT_PROTOCOL_ERROR, FALSE);
+ sfree(buf);
+ return NULL;
}
- /* List client->server MAC algorithms. */
- ssh2_pkt_addstring_start();
- for (i = 0; i < nmacs; i++) {
- ssh2_pkt_addstring_str(maclist[i]->name);
- if (i < nmacs - 1)
- ssh2_pkt_addstring_str(",");
- }
- /* List server->client MAC algorithms. */
- ssh2_pkt_addstring_start();
- for (i = 0; i < nmacs; i++) {
- ssh2_pkt_addstring_str(maclist[i]->name);
- if (i < nmacs - 1)
- ssh2_pkt_addstring_str(",");
- }
- /* List client->server compression algorithms. */
- ssh2_pkt_addstring_start();
- for (i = 0; i < lenof(compressions) + 1; i++) {
- const struct ssh_compress *c =
- i == 0 ? preferred_comp : compressions[i - 1];
- ssh2_pkt_addstring_str(c->name);
- if (i < lenof(compressions))
- ssh2_pkt_addstring_str(",");
- }
- /* List server->client compression algorithms. */
- ssh2_pkt_addstring_start();
- for (i = 0; i < lenof(compressions) + 1; i++) {
- const struct ssh_compress *c =
- i == 0 ? preferred_comp : compressions[i - 1];
- ssh2_pkt_addstring_str(c->name);
- if (i < lenof(compressions))
- ssh2_pkt_addstring_str(",");
- }
- /* List client->server languages. Empty list. */
- ssh2_pkt_addstring_start();
- /* List server->client languages. Empty list. */
- ssh2_pkt_addstring_start();
- /* First KEX packet does _not_ follow, because we're not that brave. */
- ssh2_pkt_addbool(FALSE);
- /* Reserved. */
- ssh2_pkt_adduint32(0);
-
- exhash = exhashbase;
- sha_string(&exhash, pktout.data + 5, pktout.length - 5);
-
- ssh2_pkt_send();
-
- if (!ispkt)
- crWaitUntil(ispkt);
- sha_string(&exhash, pktin.data + 5, pktin.length - 5);
+ return c;
+}
+
+static void ssh2_handle_winadj_response(struct ssh_channel *c,
+ struct Packet *pktin, void *ctx)
+{
+ unsigned *sizep = ctx;
/*
- * Now examine the other side's KEXINIT to see what we're up
- * to.
+ * Winadj responses should always be failures. However, at least
+ * one server ("boks_sshd") is known to return SUCCESS for channel
+ * requests it's never heard of, such as "winadj@putty". Raised
+ * with foxt.com as bug 090916-090424, but for the sake of a quiet
+ * life, we don't worry about what kind of response we got.
*/
- if (pktin.type != SSH2_MSG_KEXINIT) {
- bombout(("expected key exchange packet from server"));
- crReturn(0);
- }
- kex = NULL;
- hostkey = NULL;
- cscipher_tobe = NULL;
- sccipher_tobe = NULL;
- csmac_tobe = NULL;
- scmac_tobe = NULL;
- cscomp_tobe = NULL;
- sccomp_tobe = NULL;
- pktin.savedpos += 16; /* skip garbage cookie */
- ssh2_pkt_getstring(&str, &len); /* key exchange algorithms */
- for (i = 0; i < lenof(kex_algs); i++) {
- if (kex_algs[i] == &ssh_diffiehellman_gex &&
- (ssh_remote_bugs & BUG_SSH2_DH_GEX))
- continue;
- if (in_commasep_string(kex_algs[i]->name, str, len)) {
- kex = kex_algs[i];
- break;
- }
- }
- ssh2_pkt_getstring(&str, &len); /* host key algorithms */
- for (i = 0; i < lenof(hostkey_algs); i++) {
- if (in_commasep_string(hostkey_algs[i]->name, str, len)) {
- hostkey = hostkey_algs[i];
- break;
- }
- }
- ssh2_pkt_getstring(&str, &len); /* client->server cipher */
- warn = 0;
- for (i = 0; i < n_preferred_ciphers; i++) {
- const struct ssh2_ciphers *c = preferred_ciphers[i];
- if (!c) {
- warn = 1;
- } else {
- for (j = 0; j < c->nciphers; j++) {
- if (in_commasep_string(c->list[j]->name, str, len)) {
- cscipher_tobe = c->list[j];
- break;
- }
- }
- }
- if (cscipher_tobe) {
- if (warn)
- askcipher(cscipher_tobe->name, 1);
- break;
- }
- }
- if (!cscipher_tobe) {
- bombout(("Couldn't agree a client-to-server cipher (available: %s)", str));
- crReturn(0);
- }
- ssh2_pkt_getstring(&str, &len); /* server->client cipher */
- warn = 0;
- for (i = 0; i < n_preferred_ciphers; i++) {
- const struct ssh2_ciphers *c = preferred_ciphers[i];
- if (!c) {
- warn = 1;
- } else {
- for (j = 0; j < c->nciphers; j++) {
- if (in_commasep_string(c->list[j]->name, str, len)) {
- sccipher_tobe = c->list[j];
- break;
- }
- }
- }
- if (sccipher_tobe) {
- if (warn)
- askcipher(sccipher_tobe->name, 2);
- break;
- }
+ c->v.v2.remlocwin += *sizep;
+ sfree(sizep);
+ /*
+ * winadj messages are only sent when the window is fully open, so
+ * if we get an ack of one, we know any pending unthrottle is
+ * complete.
+ */
+ if (c->v.v2.throttle_state == UNTHROTTLING)
+ c->v.v2.throttle_state = UNTHROTTLED;
+}
+
+static void ssh2_msg_channel_response(Ssh ssh, struct Packet *pktin)
+{
+ struct ssh_channel *c = ssh2_channel_msg(ssh, pktin);
+ struct outstanding_channel_request *ocr;
+
+ if (!c) return;
+ ocr = c->v.v2.chanreq_head;
+ if (!ocr) {
+ ssh2_msg_unexpected(ssh, pktin);
+ return;
}
- if (!sccipher_tobe) {
- bombout(("Couldn't agree a server-to-client cipher (available: %s)", str));
- crReturn(0);
+ ocr->handler(c, pktin, ocr->ctx);
+ c->v.v2.chanreq_head = ocr->next;
+ sfree(ocr);
+ /*
+ * We may now initiate channel-closing procedures, if that
+ * CHANNEL_REQUEST was the last thing outstanding before we send
+ * CHANNEL_CLOSE.
+ */
+ ssh2_channel_check_close(c);
+}
+
+static void ssh2_msg_channel_window_adjust(Ssh ssh, struct Packet *pktin)
+{
+ struct ssh_channel *c;
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ if (!(c->closes & CLOSES_SENT_EOF)) {
+ c->v.v2.remwindow += ssh_pkt_getuint32(pktin);
+ ssh2_try_send_and_unthrottle(ssh, c);
}
+}
- ssh2_pkt_getstring(&str, &len); /* client->server mac */
- for (i = 0; i < nmacs; i++) {
- if (in_commasep_string(maclist[i]->name, str, len)) {
- csmac_tobe = maclist[i];
+static void ssh2_msg_channel_data(Ssh ssh, struct Packet *pktin)
+{
+ char *data;
+ int length;
+ struct ssh_channel *c;
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ if (pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA &&
+ ssh_pkt_getuint32(pktin) != SSH2_EXTENDED_DATA_STDERR)
+ return; /* extended but not stderr */
+ ssh_pkt_getstring(pktin, &data, &length);
+ if (data) {
+ int bufsize = 0;
+ c->v.v2.locwindow -= length;
+ c->v.v2.remlocwin -= length;
+ switch (c->type) {
+ case CHAN_MAINSESSION:
+ bufsize =
+ from_backend(ssh->frontend, pktin->type ==
+ SSH2_MSG_CHANNEL_EXTENDED_DATA,
+ data, length);
break;
- }
- }
- ssh2_pkt_getstring(&str, &len); /* server->client mac */
- for (i = 0; i < nmacs; i++) {
- if (in_commasep_string(maclist[i]->name, str, len)) {
- scmac_tobe = maclist[i];
+ case CHAN_X11:
+ bufsize = x11_send(c->u.x11.s, data, length);
break;
- }
- }
- ssh2_pkt_getstring(&str, &len); /* client->server compression */
- for (i = 0; i < lenof(compressions) + 1; i++) {
- const struct ssh_compress *c =
- i == 0 ? preferred_comp : compressions[i - 1];
- if (in_commasep_string(c->name, str, len)) {
- cscomp_tobe = c;
+ case CHAN_SOCKDATA:
+ bufsize = pfd_send(c->u.pfd.s, data, length);
break;
- }
- }
- ssh2_pkt_getstring(&str, &len); /* server->client compression */
- for (i = 0; i < lenof(compressions) + 1; i++) {
- const struct ssh_compress *c =
- i == 0 ? preferred_comp : compressions[i - 1];
- if (in_commasep_string(c->name, str, len)) {
- sccomp_tobe = c;
+ case CHAN_AGENT:
+ while (length > 0) {
+ if (c->u.a.lensofar < 4) {
+ unsigned int l = min(4 - c->u.a.lensofar,
+ (unsigned)length);
+ memcpy(c->u.a.msglen + c->u.a.lensofar,
+ data, l);
+ data += l;
+ length -= l;
+ c->u.a.lensofar += l;
+ }
+ if (c->u.a.lensofar == 4) {
+ c->u.a.totallen =
+ 4 + GET_32BIT(c->u.a.msglen);
+ c->u.a.message = snewn(c->u.a.totallen,
+ unsigned char);
+ memcpy(c->u.a.message, c->u.a.msglen, 4);
+ }
+ if (c->u.a.lensofar >= 4 && length > 0) {
+ unsigned int l =
+ min(c->u.a.totallen - c->u.a.lensofar,
+ (unsigned)length);
+ memcpy(c->u.a.message + c->u.a.lensofar,
+ data, l);
+ data += l;
+ length -= l;
+ c->u.a.lensofar += l;
+ }
+ if (c->u.a.lensofar == c->u.a.totallen) {
+ void *reply;
+ int replylen;
+ c->u.a.outstanding_requests++;
+ if (agent_query(c->u.a.message,
+ c->u.a.totallen,
+ &reply, &replylen,
+ ssh_agentf_callback, c))
+ ssh_agentf_callback(c, reply, replylen);
+ sfree(c->u.a.message);
+ c->u.a.message = NULL;
+ c->u.a.lensofar = 0;
+ }
+ }
+ bufsize = 0;
break;
}
+ /*
+ * If it looks like the remote end hit the end of its window,
+ * and we didn't want it to do that, think about using a
+ * larger window.
+ */
+ if (c->v.v2.remlocwin <= 0 && c->v.v2.throttle_state == UNTHROTTLED &&
+ c->v.v2.locmaxwin < 0x40000000)
+ c->v.v2.locmaxwin += OUR_V2_WINSIZE;
+ /*
+ * If we are not buffering too much data,
+ * enlarge the window again at the remote side.
+ * If we are buffering too much, we may still
+ * need to adjust the window if the server's
+ * sent excess data.
+ */
+ ssh2_set_window(c, bufsize < c->v.v2.locmaxwin ?
+ c->v.v2.locmaxwin - bufsize : 0);
+ /*
+ * If we're either buffering way too much data, or if we're
+ * buffering anything at all and we're in "simple" mode,
+ * throttle the whole channel.
+ */
+ if ((bufsize > c->v.v2.locmaxwin ||
+ (conf_get_int(ssh->conf, CONF_ssh_simple) && bufsize > 0)) &&
+ !c->throttling_conn) {
+ c->throttling_conn = 1;
+ ssh_throttle_conn(ssh, +1);
+ }
}
+}
- /*
- * Work out the number of bits of key we will need from the key
- * exchange. We start with the maximum key length of either
- * cipher...
- */
- {
- int csbits, scbits;
+static void ssh_channel_destroy(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
- csbits = cscipher_tobe->keylen;
- scbits = sccipher_tobe->keylen;
- nbits = (csbits > scbits ? csbits : scbits);
+ switch (c->type) {
+ case CHAN_MAINSESSION:
+ ssh->mainchan = NULL;
+ update_specials_menu(ssh->frontend);
+ break;
+ case CHAN_X11:
+ if (c->u.x11.s != NULL)
+ x11_close(c->u.x11.s);
+ logevent("Forwarded X11 connection terminated");
+ break;
+ case CHAN_AGENT:
+ sfree(c->u.a.message);
+ break;
+ case CHAN_SOCKDATA:
+ if (c->u.pfd.s != NULL)
+ pfd_close(c->u.pfd.s);
+ logevent("Forwarded port closed");
+ break;
}
- /* The keys only have 160-bit entropy, since they're based on
- * a SHA-1 hash. So cap the key size at 160 bits. */
- if (nbits > 160)
- nbits = 160;
- /*
- * If we're doing Diffie-Hellman group exchange, start by
- * requesting a group.
- */
- if (kex == &ssh_diffiehellman_gex) {
- logevent("Doing Diffie-Hellman group exchange");
- ssh_pkt_ctx |= SSH2_PKTCTX_DHGEX;
- /*
- * Work out how big a DH group we will need to allow that
- * much data.
- */
- pbits = 512 << ((nbits - 1) / 64);
- ssh2_pkt_init(SSH2_MSG_KEX_DH_GEX_REQUEST);
- ssh2_pkt_adduint32(pbits);
- ssh2_pkt_send();
-
- crWaitUntil(ispkt);
- if (pktin.type != SSH2_MSG_KEX_DH_GEX_GROUP) {
- bombout(("expected key exchange group packet from server"));
- crReturn(0);
- }
- p = ssh2_pkt_getmp();
- g = ssh2_pkt_getmp();
- dh_setup_group(p, g);
- kex_init_value = SSH2_MSG_KEX_DH_GEX_INIT;
- kex_reply_value = SSH2_MSG_KEX_DH_GEX_REPLY;
- } else {
- ssh_pkt_ctx |= SSH2_PKTCTX_DHGROUP1;
- dh_setup_group1();
- kex_init_value = SSH2_MSG_KEXDH_INIT;
- kex_reply_value = SSH2_MSG_KEXDH_REPLY;
+ del234(ssh->channels, c);
+ if (ssh->version == 2) {
+ bufchain_clear(&c->v.v2.outbuffer);
+ assert(c->v.v2.chanreq_head == NULL);
}
+ sfree(c);
- logevent("Doing Diffie-Hellman key exchange");
/*
- * Now generate and send e for Diffie-Hellman.
+ * See if that was the last channel left open.
+ * (This is only our termination condition if we're
+ * not running in -N mode.)
*/
- e = dh_create_e(nbits * 2);
- ssh2_pkt_init(kex_init_value);
- ssh2_pkt_addmp(e);
- ssh2_pkt_send();
+ if (ssh->version == 2 &&
+ !conf_get_int(ssh->conf, CONF_ssh_no_shell) &&
+ count234(ssh->channels) == 0) {
+ /*
+ * We used to send SSH_MSG_DISCONNECT here,
+ * because I'd believed that _every_ conforming
+ * SSH-2 connection had to end with a disconnect
+ * being sent by at least one side; apparently
+ * I was wrong and it's perfectly OK to
+ * unceremoniously slam the connection shut
+ * when you're done, and indeed OpenSSH feels
+ * this is more polite than sending a
+ * DISCONNECT. So now we don't.
+ */
+ ssh_disconnect(ssh, "All channels closed", NULL, 0, TRUE);
+ }
+}
+
+static void ssh2_channel_check_close(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
- crWaitUntil(ispkt);
- if (pktin.type != kex_reply_value) {
- bombout(("expected key exchange reply packet from server"));
- crReturn(0);
+ if ((!((CLOSES_SENT_EOF | CLOSES_RCVD_EOF) & ~c->closes) ||
+ c->type == CHAN_ZOMBIE) &&
+ !c->v.v2.chanreq_head &&
+ !(c->closes & CLOSES_SENT_CLOSE)) {
+ /*
+ * We have both sent and received EOF (or the channel is a
+ * zombie), and we have no outstanding channel requests, which
+ * means the channel is in final wind-up. But we haven't sent
+ * CLOSE, so let's do so now.
+ */
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_send(ssh, pktout);
+ c->closes |= CLOSES_SENT_EOF | CLOSES_SENT_CLOSE;
}
- ssh2_pkt_getstring(&hostkeydata, &hostkeylen);
- f = ssh2_pkt_getmp();
- ssh2_pkt_getstring(&sigdata, &siglen);
- K = dh_find_K(f);
+ if (!((CLOSES_SENT_CLOSE | CLOSES_RCVD_CLOSE) & ~c->closes)) {
+ assert(c->v.v2.chanreq_head == NULL);
+ /*
+ * We have both sent and received CLOSE, which means we're
+ * completely done with the channel.
+ */
+ ssh_channel_destroy(c);
+ }
+}
- sha_string(&exhash, hostkeydata, hostkeylen);
- if (kex == &ssh_diffiehellman_gex) {
- sha_uint32(&exhash, pbits);
- sha_mpint(&exhash, p);
- sha_mpint(&exhash, g);
+static void ssh2_channel_got_eof(struct ssh_channel *c)
+{
+ if (c->closes & CLOSES_RCVD_EOF)
+ return; /* already seen EOF */
+ c->closes |= CLOSES_RCVD_EOF;
+
+ if (c->type == CHAN_X11) {
+ x11_send_eof(c->u.x11.s);
+ } else if (c->type == CHAN_AGENT) {
+ if (c->u.a.outstanding_requests == 0) {
+ /* Manufacture an outgoing EOF in response to the incoming one. */
+ sshfwd_write_eof(c);
+ }
+ } else if (c->type == CHAN_SOCKDATA) {
+ pfd_send_eof(c->u.pfd.s);
+ } else if (c->type == CHAN_MAINSESSION) {
+ Ssh ssh = c->ssh;
+
+ if (!ssh->sent_console_eof &&
+ (from_backend_eof(ssh->frontend) || ssh->got_pty)) {
+ /*
+ * Either from_backend_eof told us that the front end
+ * wants us to close the outgoing side of the connection
+ * as soon as we see EOF from the far end, or else we've
+ * unilaterally decided to do that because we've allocated
+ * a remote pty and hence EOF isn't a particularly
+ * meaningful concept.
+ */
+ sshfwd_write_eof(c);
+ }
+ ssh->sent_console_eof = TRUE;
}
- sha_mpint(&exhash, e);
- sha_mpint(&exhash, f);
- sha_mpint(&exhash, K);
- SHA_Final(&exhash, exchange_hash);
- dh_cleanup();
+ ssh2_channel_check_close(c);
+}
-#if 0
- debug(("Exchange hash is:\n"));
- dmemdump(exchange_hash, 20);
-#endif
+static void ssh2_msg_channel_eof(Ssh ssh, struct Packet *pktin)
+{
+ struct ssh_channel *c;
- hkey = hostkey->newkey(hostkeydata, hostkeylen);
- if (!hkey ||
- !hostkey->verifysig(hkey, sigdata, siglen, exchange_hash, 20)) {
- bombout(("Server's host key did not match the signature supplied"));
- crReturn(0);
- }
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ ssh2_channel_got_eof(c);
+}
+
+static void ssh2_msg_channel_close(Ssh ssh, struct Packet *pktin)
+{
+ struct ssh_channel *c;
+
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
/*
- * Authenticate remote host: verify host key. (We've already
- * checked the signature of the exchange hash.)
+ * When we receive CLOSE on a channel, we assume it comes with an
+ * implied EOF if we haven't seen EOF yet.
*/
- keystr = hostkey->fmtkey(hkey);
- fingerprint = hostkey->fingerprint(hkey);
- verify_ssh_host_key(savedhost, savedport, hostkey->keytype,
- keystr, fingerprint);
- if (first_kex) { /* don't bother logging this in rekeys */
- logevent("Host key fingerprint is:");
- logevent(fingerprint);
- }
- sfree(fingerprint);
- sfree(keystr);
- hostkey->freekey(hkey);
+ ssh2_channel_got_eof(c);
/*
- * Send SSH2_MSG_NEWKEYS.
+ * And we also send an outgoing EOF, if we haven't already, on the
+ * assumption that CLOSE is a pretty forceful announcement that
+ * the remote side is doing away with the entire channel. (If it
+ * had wanted to send us EOF and continue receiving data from us,
+ * it would have just sent CHANNEL_EOF.)
*/
- ssh2_pkt_init(SSH2_MSG_NEWKEYS);
- ssh2_pkt_send();
+ if (!(c->closes & CLOSES_SENT_EOF)) {
+ /*
+ * Make sure we don't read any more from whatever our local
+ * data source is for this channel.
+ */
+ switch (c->type) {
+ case CHAN_MAINSESSION:
+ ssh->send_ok = 0; /* stop trying to read from stdin */
+ break;
+ case CHAN_X11:
+ x11_override_throttle(c->u.x11.s, 1);
+ break;
+ case CHAN_SOCKDATA:
+ pfd_override_throttle(c->u.pfd.s, 1);
+ break;
+ }
+
+ /*
+ * Abandon any buffered data we still wanted to send to this
+ * channel. Receiving a CHANNEL_CLOSE is an indication that
+ * the server really wants to get on and _destroy_ this
+ * channel, and it isn't going to send us any further
+ * WINDOW_ADJUSTs to permit us to send pending stuff.
+ */
+ bufchain_clear(&c->v.v2.outbuffer);
+
+ /*
+ * Send outgoing EOF.
+ */
+ sshfwd_write_eof(c);
+ }
/*
- * Expect SSH2_MSG_NEWKEYS from server.
+ * Now process the actual close.
*/
- crWaitUntil(ispkt);
- if (pktin.type != SSH2_MSG_NEWKEYS) {
- bombout(("expected new-keys packet from server"));
- crReturn(0);
+ if (!(c->closes & CLOSES_RCVD_CLOSE)) {
+ c->closes |= CLOSES_RCVD_CLOSE;
+ ssh2_channel_check_close(c);
}
+}
+
+static void ssh2_msg_channel_open_confirmation(Ssh ssh, struct Packet *pktin)
+{
+ struct ssh_channel *c;
+
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ if (c->type != CHAN_SOCKDATA_DORMANT)
+ return; /* dunno why they're confirming this */
+ c->remoteid = ssh_pkt_getuint32(pktin);
+ c->halfopen = FALSE;
+ c->type = CHAN_SOCKDATA;
+ c->v.v2.remwindow = ssh_pkt_getuint32(pktin);
+ c->v.v2.remmaxpkt = ssh_pkt_getuint32(pktin);
+ if (c->u.pfd.s)
+ pfd_confirm(c->u.pfd.s);
+ if (c->pending_eof)
+ ssh_channel_try_eof(c);
+}
+
+static void ssh2_msg_channel_open_failure(Ssh ssh, struct Packet *pktin)
+{
+ static const char *const reasons[] = {
+ "<unknown reason code>",
+ "Administratively prohibited",
+ "Connect failed",
+ "Unknown channel type",
+ "Resource shortage",
+ };
+ unsigned reason_code;
+ char *reason_string;
+ int reason_length;
+ struct ssh_channel *c;
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ if (c->type != CHAN_SOCKDATA_DORMANT)
+ return; /* dunno why they're failing this */
+
+ reason_code = ssh_pkt_getuint32(pktin);
+ if (reason_code >= lenof(reasons))
+ reason_code = 0; /* ensure reasons[reason_code] in range */
+ ssh_pkt_getstring(pktin, &reason_string, &reason_length);
+ logeventf(ssh, "Forwarded connection refused by server: %s [%.*s]",
+ reasons[reason_code], reason_length, reason_string);
+
+ pfd_close(c->u.pfd.s);
+
+ del234(ssh->channels, c);
+ sfree(c);
+}
+
+static void ssh2_msg_channel_request(Ssh ssh, struct Packet *pktin)
+{
+ char *type;
+ int typelen, want_reply;
+ int reply = SSH2_MSG_CHANNEL_FAILURE; /* default */
+ struct ssh_channel *c;
+ struct Packet *pktout;
+
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ ssh_pkt_getstring(pktin, &type, &typelen);
+ want_reply = ssh2_pkt_getbool(pktin);
/*
- * Create and initialise session keys.
+ * Having got the channel number, we now look at
+ * the request type string to see if it's something
+ * we recognise.
*/
- cscipher = cscipher_tobe;
- sccipher = sccipher_tobe;
- csmac = csmac_tobe;
- scmac = scmac_tobe;
- cscomp = cscomp_tobe;
- sccomp = sccomp_tobe;
- cscomp->compress_init();
- sccomp->decompress_init();
+ if (c == ssh->mainchan) {
+ /*
+ * We recognise "exit-status" and "exit-signal" on
+ * the primary channel.
+ */
+ if (typelen == 11 &&
+ !memcmp(type, "exit-status", 11)) {
+
+ ssh->exitcode = ssh_pkt_getuint32(pktin);
+ logeventf(ssh, "Server sent command exit status %d",
+ ssh->exitcode);
+ reply = SSH2_MSG_CHANNEL_SUCCESS;
+
+ } else if (typelen == 11 &&
+ !memcmp(type, "exit-signal", 11)) {
+
+ int is_plausible = TRUE, is_int = FALSE;
+ char *fmt_sig = "", *fmt_msg = "";
+ char *msg;
+ int msglen = 0, core = FALSE;
+ /* ICK: older versions of OpenSSH (e.g. 3.4p1)
+ * provide an `int' for the signal, despite its
+ * having been a `string' in the drafts of RFC 4254 since at
+ * least 2001. (Fixed in session.c 1.147.) Try to
+ * infer which we can safely parse it as. */
+ {
+ unsigned char *p = pktin->body +
+ pktin->savedpos;
+ long len = pktin->length - pktin->savedpos;
+ unsigned long num = GET_32BIT(p); /* what is it? */
+ /* If it's 0, it hardly matters; assume string */
+ if (num == 0) {
+ is_int = FALSE;
+ } else {
+ int maybe_int = FALSE, maybe_str = FALSE;
+#define CHECK_HYPOTHESIS(offset, result) \
+ do \
+ { \
+ int q = toint(offset); \
+ if (q >= 0 && q+4 <= len) { \
+ q = toint(q + 4 + GET_32BIT(p+q)); \
+ if (q >= 0 && q+4 <= len && \
+ ((q = toint(q + 4 + GET_32BIT(p+q))) != 0) && \
+ q == len) \
+ result = TRUE; \
+ } \
+ } while(0)
+ CHECK_HYPOTHESIS(4+1, maybe_int);
+ CHECK_HYPOTHESIS(4+num+1, maybe_str);
+#undef CHECK_HYPOTHESIS
+ if (maybe_int && !maybe_str)
+ is_int = TRUE;
+ else if (!maybe_int && maybe_str)
+ is_int = FALSE;
+ else
+ /* Crikey. Either or neither. Panic. */
+ is_plausible = FALSE;
+ }
+ }
+ ssh->exitcode = 128; /* means `unknown signal' */
+ if (is_plausible) {
+ if (is_int) {
+ /* Old non-standard OpenSSH. */
+ int signum = ssh_pkt_getuint32(pktin);
+ fmt_sig = dupprintf(" %d", signum);
+ ssh->exitcode = 128 + signum;
+ } else {
+ /* As per RFC 4254. */
+ char *sig;
+ int siglen;
+ ssh_pkt_getstring(pktin, &sig, &siglen);
+ /* Signal name isn't supposed to be blank, but
+ * let's cope gracefully if it is. */
+ if (siglen) {
+ fmt_sig = dupprintf(" \"%.*s\"",
+ siglen, sig);
+ }
+
+ /*
+ * Really hideous method of translating the
+ * signal description back into a locally
+ * meaningful number.
+ */
+
+ if (0)
+ ;
+#define TRANSLATE_SIGNAL(s) \
+ else if (siglen == lenof(#s)-1 && !memcmp(sig, #s, siglen)) \
+ ssh->exitcode = 128 + SIG ## s
+#ifdef SIGABRT
+ TRANSLATE_SIGNAL(ABRT);
+#endif
+#ifdef SIGALRM
+ TRANSLATE_SIGNAL(ALRM);
+#endif
+#ifdef SIGFPE
+ TRANSLATE_SIGNAL(FPE);
+#endif
+#ifdef SIGHUP
+ TRANSLATE_SIGNAL(HUP);
+#endif
+#ifdef SIGILL
+ TRANSLATE_SIGNAL(ILL);
+#endif
+#ifdef SIGINT
+ TRANSLATE_SIGNAL(INT);
+#endif
+#ifdef SIGKILL
+ TRANSLATE_SIGNAL(KILL);
+#endif
+#ifdef SIGPIPE
+ TRANSLATE_SIGNAL(PIPE);
+#endif
+#ifdef SIGQUIT
+ TRANSLATE_SIGNAL(QUIT);
+#endif
+#ifdef SIGSEGV
+ TRANSLATE_SIGNAL(SEGV);
+#endif
+#ifdef SIGTERM
+ TRANSLATE_SIGNAL(TERM);
+#endif
+#ifdef SIGUSR1
+ TRANSLATE_SIGNAL(USR1);
+#endif
+#ifdef SIGUSR2
+ TRANSLATE_SIGNAL(USR2);
+#endif
+#undef TRANSLATE_SIGNAL
+ else
+ ssh->exitcode = 128;
+ }
+ core = ssh2_pkt_getbool(pktin);
+ ssh_pkt_getstring(pktin, &msg, &msglen);
+ if (msglen) {
+ fmt_msg = dupprintf(" (\"%.*s\")", msglen, msg);
+ }
+ /* ignore lang tag */
+ } /* else don't attempt to parse */
+ logeventf(ssh, "Server exited on signal%s%s%s",
+ fmt_sig, core ? " (core dumped)" : "",
+ fmt_msg);
+ if (*fmt_sig) sfree(fmt_sig);
+ if (*fmt_msg) sfree(fmt_msg);
+ reply = SSH2_MSG_CHANNEL_SUCCESS;
+
+ }
+ } else {
+ /*
+ * This is a channel request we don't know
+ * about, so we now either ignore the request
+ * or respond with CHANNEL_FAILURE, depending
+ * on want_reply.
+ */
+ reply = SSH2_MSG_CHANNEL_FAILURE;
+ }
+ if (want_reply) {
+ pktout = ssh2_pkt_init(reply);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_send(ssh, pktout);
+ }
+}
+
+static void ssh2_msg_global_request(Ssh ssh, struct Packet *pktin)
+{
+ char *type;
+ int typelen, want_reply;
+ struct Packet *pktout;
+
+ ssh_pkt_getstring(pktin, &type, &typelen);
+ want_reply = ssh2_pkt_getbool(pktin);
+
/*
- * Set IVs after keys. Here we use the exchange hash from the
- * _first_ key exchange.
+ * We currently don't support any global requests
+ * at all, so we either ignore the request or
+ * respond with REQUEST_FAILURE, depending on
+ * want_reply.
*/
- if (first_kex)
- memcpy(ssh2_session_id, exchange_hash, sizeof(exchange_hash));
- ssh2_mkkey(K, exchange_hash, ssh2_session_id, 'C', keyspace);
- cscipher->setcskey(keyspace);
- ssh2_mkkey(K, exchange_hash, ssh2_session_id, 'D', keyspace);
- sccipher->setsckey(keyspace);
- ssh2_mkkey(K, exchange_hash, ssh2_session_id, 'A', keyspace);
- cscipher->setcsiv(keyspace);
- ssh2_mkkey(K, exchange_hash, ssh2_session_id, 'B', keyspace);
- sccipher->setsciv(keyspace);
- ssh2_mkkey(K, exchange_hash, ssh2_session_id, 'E', keyspace);
- csmac->setcskey(keyspace);
- ssh2_mkkey(K, exchange_hash, ssh2_session_id, 'F', keyspace);
- scmac->setsckey(keyspace);
+ if (want_reply) {
+ pktout = ssh2_pkt_init(SSH2_MSG_REQUEST_FAILURE);
+ ssh2_pkt_send(ssh, pktout);
+ }
+}
+
+static void ssh2_msg_channel_open(Ssh ssh, struct Packet *pktin)
+{
+ char *type;
+ int typelen;
+ char *peeraddr;
+ int peeraddrlen;
+ int peerport;
+ char *error = NULL;
+ struct ssh_channel *c;
+ unsigned remid, winsize, pktsize;
+ struct Packet *pktout;
+
+ ssh_pkt_getstring(pktin, &type, &typelen);
+ c = snew(struct ssh_channel);
+ c->ssh = ssh;
+
+ remid = ssh_pkt_getuint32(pktin);
+ winsize = ssh_pkt_getuint32(pktin);
+ pktsize = ssh_pkt_getuint32(pktin);
+
+ if (typelen == 3 && !memcmp(type, "x11", 3)) {
+ char *addrstr;
+ const char *x11err;
+
+ ssh_pkt_getstring(pktin, &peeraddr, &peeraddrlen);
+ addrstr = snewn(peeraddrlen+1, char);
+ memcpy(addrstr, peeraddr, peeraddrlen);
+ addrstr[peeraddrlen] = '\0';
+ peerport = ssh_pkt_getuint32(pktin);
+
+ logeventf(ssh, "Received X11 connect request from %s:%d",
+ addrstr, peerport);
+
+ if (!ssh->X11_fwd_enabled)
+ error = "X11 forwarding is not enabled";
+ else if ((x11err = x11_init(&c->u.x11.s, ssh->x11disp, c,
+ addrstr, peerport, ssh->conf)) != NULL) {
+ logeventf(ssh, "Local X11 connection failed: %s", x11err);
+ error = "Unable to open an X11 connection";
+ } else {
+ logevent("Opening X11 forward connection succeeded");
+ c->type = CHAN_X11;
+ }
+
+ sfree(addrstr);
+ } else if (typelen == 15 &&
+ !memcmp(type, "forwarded-tcpip", 15)) {
+ struct ssh_rportfwd pf, *realpf;
+ char *dummy;
+ int dummylen;
+ ssh_pkt_getstring(pktin, &dummy, &dummylen);/* skip address */
+ pf.sport = ssh_pkt_getuint32(pktin);
+ ssh_pkt_getstring(pktin, &peeraddr, &peeraddrlen);
+ peerport = ssh_pkt_getuint32(pktin);
+ realpf = find234(ssh->rportfwds, &pf, NULL);
+ logeventf(ssh, "Received remote port %d open request "
+ "from %s:%d", pf.sport, peeraddr, peerport);
+ if (realpf == NULL) {
+ error = "Remote port is not recognised";
+ } else {
+ const char *e = pfd_newconnect(&c->u.pfd.s,
+ realpf->dhost,
+ realpf->dport, c,
+ ssh->conf,
+ realpf->pfrec->addressfamily);
+ logeventf(ssh, "Attempting to forward remote port to "
+ "%s:%d", realpf->dhost, realpf->dport);
+ if (e != NULL) {
+ logeventf(ssh, "Port open failed: %s", e);
+ error = "Port open failed";
+ } else {
+ logevent("Forwarded port opened successfully");
+ c->type = CHAN_SOCKDATA;
+ }
+ }
+ } else if (typelen == 22 &&
+ !memcmp(type, "auth-agent@openssh.com", 22)) {
+ if (!ssh->agentfwd_enabled)
+ error = "Agent forwarding is not enabled";
+ else {
+ c->type = CHAN_AGENT; /* identify channel type */
+ c->u.a.lensofar = 0;
+ c->u.a.outstanding_requests = 0;
+ }
+ } else {
+ error = "Unsupported channel type requested";
+ }
+
+ c->remoteid = remid;
+ c->halfopen = FALSE;
+ if (error) {
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN_FAILURE);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_adduint32(pktout, SSH2_OPEN_CONNECT_FAILED);
+ ssh2_pkt_addstring(pktout, error);
+ ssh2_pkt_addstring(pktout, "en"); /* language tag */
+ ssh2_pkt_send(ssh, pktout);
+ logeventf(ssh, "Rejected channel open: %s", error);
+ sfree(c);
+ } else {
+ ssh2_channel_init(c);
+ c->v.v2.remwindow = winsize;
+ c->v.v2.remmaxpkt = pktsize;
+ add234(ssh->channels, c);
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_adduint32(pktout, c->localid);
+ ssh2_pkt_adduint32(pktout, c->v.v2.locwindow);
+ ssh2_pkt_adduint32(pktout, OUR_V2_MAXPKT); /* our max pkt size */
+ ssh2_pkt_send(ssh, pktout);
+ }
+}
+
+/*
+ * Buffer banner messages for later display at some convenient point,
+ * if we're going to display them.
+ */
+static void ssh2_msg_userauth_banner(Ssh ssh, struct Packet *pktin)
+{
+ /* Arbitrary limit to prevent unbounded inflation of buffer */
+ if (conf_get_int(ssh->conf, CONF_ssh_show_banner) &&
+ bufchain_size(&ssh->banner) <= 131072) {
+ char *banner = NULL;
+ int size = 0;
+ ssh_pkt_getstring(pktin, &banner, &size);
+ if (banner)
+ bufchain_add(&ssh->banner, banner, size);
+ }
+}
- /*
- * If this is the first key exchange phase, we must pass the
- * SSH2_MSG_NEWKEYS packet to the next layer, not because it
- * wants to see it but because it will need time to initialise
- * itself before it sees an actual packet. In subsequent key
- * exchange phases, we don't pass SSH2_MSG_NEWKEYS on, because
- * it would only confuse the layer above.
- */
- if (!first_kex) {
- crReturn(0);
+/* Helper function to deal with sending tty modes for "pty-req" */
+static void ssh2_send_ttymode(void *data, char *mode, char *val)
+{
+ struct Packet *pktout = (struct Packet *)data;
+ int i = 0;
+ unsigned int arg = 0;
+ while (strcmp(mode, ssh_ttymodes[i].mode) != 0) i++;
+ if (i == lenof(ssh_ttymodes)) return;
+ switch (ssh_ttymodes[i].type) {
+ case TTY_OP_CHAR:
+ arg = ssh_tty_parse_specchar(val);
+ break;
+ case TTY_OP_BOOL:
+ arg = ssh_tty_parse_boolean(val);
+ break;
}
- first_kex = 0;
+ ssh2_pkt_addbyte(pktout, ssh_ttymodes[i].opcode);
+ ssh2_pkt_adduint32(pktout, arg);
+}
+static void ssh2_setup_x11(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
+{
+ struct ssh2_setup_x11_state {
+ int crLine;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_setup_x11_state, ctx);
+
+ crBeginState;
+
+ logevent("Requesting X11 forwarding");
+ pktout = ssh2_chanreq_init(ssh->mainchan, "x11-req",
+ ssh2_setup_x11, s);
+ ssh2_pkt_addbool(pktout, 0); /* many connections */
+ ssh2_pkt_addstring(pktout, ssh->x11disp->remoteauthprotoname);
/*
- * Now we're encrypting. Begin returning 1 to the protocol main
- * function so that other things can run on top of the
- * transport. If we ever see a KEXINIT, we must go back to the
- * start.
+ * Note that while we blank the X authentication data here, we don't
+ * take any special action to blank the start of an X11 channel,
+ * so using MIT-MAGIC-COOKIE-1 and actually opening an X connection
+ * without having session blanking enabled is likely to leak your
+ * cookie into the log.
*/
- while (!(ispkt && pktin.type == SSH2_MSG_KEXINIT)) {
- crReturn(1);
+ dont_log_password(ssh, pktout, PKTLOG_BLANK);
+ ssh2_pkt_addstring(pktout, ssh->x11disp->remoteauthdatastring);
+ end_log_omission(ssh, pktout);
+ ssh2_pkt_adduint32(pktout, ssh->x11disp->screennum);
+ ssh2_pkt_send(ssh, pktout);
+
+ /* Wait to be called back with either a response packet, or NULL
+ * meaning clean up and free our data */
+ crReturnV;
+
+ if (pktin) {
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS) {
+ logevent("X11 forwarding enabled");
+ ssh->X11_fwd_enabled = TRUE;
+ } else
+ logevent("X11 forwarding refused");
}
- logevent("Server initiated key re-exchange");
- goto begin_key_exchange;
- crFinish(1);
+ crFinishFreeV;
}
-/*
- * Add data to an SSH2 channel output buffer.
- */
-static void ssh2_add_channel_data(struct ssh_channel *c, char *buf,
- int len)
+static void ssh2_setup_agent(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
{
- bufchain_add(&c->v.v2.outbuffer, buf, len);
+ struct ssh2_setup_agent_state {
+ int crLine;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_setup_agent_state, ctx);
+
+ crBeginState;
+
+ logevent("Requesting OpenSSH-style agent forwarding");
+ pktout = ssh2_chanreq_init(ssh->mainchan, "auth-agent-req@openssh.com",
+ ssh2_setup_agent, s);
+ ssh2_pkt_send(ssh, pktout);
+
+ /* Wait to be called back with either a response packet, or NULL
+ * meaning clean up and free our data */
+ crReturnV;
+
+ if (pktin) {
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS) {
+ logevent("Agent forwarding enabled");
+ ssh->agentfwd_enabled = TRUE;
+ } else
+ logevent("Agent forwarding refused");
+ }
+
+ crFinishFreeV;
}
-/*
- * Attempt to send data on an SSH2 channel.
- */
-static int ssh2_try_send(struct ssh_channel *c)
+static void ssh2_setup_pty(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
{
- while (c->v.v2.remwindow > 0 && bufchain_size(&c->v.v2.outbuffer) > 0) {
- int len;
- void *data;
- bufchain_prefix(&c->v.v2.outbuffer, &data, &len);
- if ((unsigned)len > c->v.v2.remwindow)
- len = c->v.v2.remwindow;
- if ((unsigned)len > c->v.v2.remmaxpkt)
- len = c->v.v2.remmaxpkt;
- ssh2_pkt_init(SSH2_MSG_CHANNEL_DATA);
- ssh2_pkt_adduint32(c->remoteid);
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data(data, len);
- ssh2_pkt_send();
- bufchain_consume(&c->v.v2.outbuffer, len);
- c->v.v2.remwindow -= len;
+ struct ssh2_setup_pty_state {
+ int crLine;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_setup_pty_state, ctx);
+
+ crBeginState;
+
+ /* Unpick the terminal-speed string. */
+ /* XXX perhaps we should allow no speeds to be sent. */
+ ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
+ sscanf(conf_get_str(ssh->conf, CONF_termspeed), "%d,%d", &ssh->ospeed, &ssh->ispeed);
+ /* Build the pty request. */
+ pktout = ssh2_chanreq_init(ssh->mainchan, "pty-req",
+ ssh2_setup_pty, s);
+ ssh2_pkt_addstring(pktout, conf_get_str(ssh->conf, CONF_termtype));
+ ssh2_pkt_adduint32(pktout, ssh->term_width);
+ ssh2_pkt_adduint32(pktout, ssh->term_height);
+ ssh2_pkt_adduint32(pktout, 0); /* pixel width */
+ ssh2_pkt_adduint32(pktout, 0); /* pixel height */
+ ssh2_pkt_addstring_start(pktout);
+ parse_ttymodes(ssh, ssh2_send_ttymode, (void *)pktout);
+ ssh2_pkt_addbyte(pktout, SSH2_TTY_OP_ISPEED);
+ ssh2_pkt_adduint32(pktout, ssh->ispeed);
+ ssh2_pkt_addbyte(pktout, SSH2_TTY_OP_OSPEED);
+ ssh2_pkt_adduint32(pktout, ssh->ospeed);
+ ssh2_pkt_addstring_data(pktout, "\0", 1); /* TTY_OP_END */
+ ssh2_pkt_send(ssh, pktout);
+ ssh->state = SSH_STATE_INTERMED;
+
+ /* Wait to be called back with either a response packet, or NULL
+ * meaning clean up and free our data */
+ crReturnV;
+
+ if (pktin) {
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS) {
+ logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
+ ssh->ospeed, ssh->ispeed);
+ ssh->got_pty = TRUE;
+ } else {
+ c_write_str(ssh, "Server refused to allocate pty\r\n");
+ ssh->editing = ssh->echoing = 1;
+ }
}
- /*
- * After having sent as much data as we can, return the amount
- * still buffered.
- */
- return bufchain_size(&c->v.v2.outbuffer);
+ crFinishFreeV;
}
-/*
- * Potentially enlarge the window on an SSH2 channel.
- */
-static void ssh2_set_window(struct ssh_channel *c, unsigned newwin)
+static void ssh2_setup_env(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
{
+ struct ssh2_setup_env_state {
+ int crLine;
+ int num_env, env_left, env_ok;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_setup_env_state, ctx);
+
+ crBeginState;
+
/*
- * Never send WINDOW_ADJUST for a channel that the remote side
- * already thinks it's closed; there's no point, since it won't
- * be sending any more data anyway.
+ * Send environment variables.
+ *
+ * Simplest thing here is to send all the requests at once, and
+ * then wait for a whole bunch of successes or failures.
*/
- if (c->closes != 0)
- return;
+ s->num_env = 0;
+ {
+ char *key, *val;
- if (newwin > c->v.v2.locwindow) {
- ssh2_pkt_init(SSH2_MSG_CHANNEL_WINDOW_ADJUST);
- ssh2_pkt_adduint32(c->remoteid);
- ssh2_pkt_adduint32(newwin - c->v.v2.locwindow);
- ssh2_pkt_send();
- c->v.v2.locwindow = newwin;
+ for (val = conf_get_str_strs(ssh->conf, CONF_environmt, NULL, &key);
+ val != NULL;
+ val = conf_get_str_strs(ssh->conf, CONF_environmt, key, &key)) {
+ pktout = ssh2_chanreq_init(ssh->mainchan, "env", ssh2_setup_env, s);
+ ssh2_pkt_addstring(pktout, key);
+ ssh2_pkt_addstring(pktout, val);
+ ssh2_pkt_send(ssh, pktout);
+
+ s->num_env++;
+ }
+ if (s->num_env)
+ logeventf(ssh, "Sent %d environment variables", s->num_env);
+ }
+
+ if (s->num_env) {
+ s->env_ok = 0;
+ s->env_left = s->num_env;
+
+ while (s->env_left > 0) {
+ /* Wait to be called back with either a response packet,
+ * or NULL meaning clean up and free our data */
+ crReturnV;
+ if (!pktin) goto out;
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS)
+ s->env_ok++;
+ s->env_left--;
+ }
+
+ if (s->env_ok == s->num_env) {
+ logevent("All environment variables successfully set");
+ } else if (s->env_ok == 0) {
+ logevent("All environment variables refused");
+ c_write_str(ssh, "Server refused to set environment variables\r\n");
+ } else {
+ logeventf(ssh, "%d environment variables refused",
+ s->num_env - s->env_ok);
+ c_write_str(ssh, "Server refused to set all environment variables\r\n");
+ }
}
+ out:;
+ crFinishFreeV;
}
/*
- * Handle the SSH2 userauth and connection layers.
+ * Handle the SSH-2 userauth and connection layers.
*/
-static void do_ssh2_authconn(unsigned char *in, int inlen, int ispkt)
-{
- static enum {
- AUTH_INVALID, AUTH_PUBLICKEY_AGENT, AUTH_PUBLICKEY_FILE,
- AUTH_PASSWORD,
- AUTH_KEYBOARD_INTERACTIVE
- } method;
- static enum {
- AUTH_TYPE_NONE,
- AUTH_TYPE_PUBLICKEY,
- AUTH_TYPE_PUBLICKEY_OFFER_LOUD,
- AUTH_TYPE_PUBLICKEY_OFFER_QUIET,
- AUTH_TYPE_PASSWORD,
- AUTH_TYPE_KEYBOARD_INTERACTIVE,
- AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET
- } type;
- static int gotit, need_pw, can_pubkey, can_passwd, can_keyb_inter;
- static int tried_pubkey_config, tried_agent, tried_keyb_inter;
- static int kbd_inter_running;
- static int we_are_in;
- static int num_prompts, curr_prompt, echo;
- static char username[100];
- static int got_username;
- static char pwprompt[200];
- static char password[100];
- static void *publickey_blob;
- static int publickey_bloblen;
-
- crBegin;
+static void ssh2_msg_authconn(Ssh ssh, struct Packet *pktin)
+{
+ do_ssh2_authconn(ssh, NULL, 0, pktin);
+}
+
+static void ssh2_response_authconn(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
+{
+ do_ssh2_authconn(c->ssh, NULL, 0, pktin);
+}
+
+static void do_ssh2_authconn(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin)
+{
+ struct do_ssh2_authconn_state {
+ int crLine;
+ enum {
+ AUTH_TYPE_NONE,
+ AUTH_TYPE_PUBLICKEY,
+ AUTH_TYPE_PUBLICKEY_OFFER_LOUD,
+ AUTH_TYPE_PUBLICKEY_OFFER_QUIET,
+ AUTH_TYPE_PASSWORD,
+ AUTH_TYPE_GSSAPI, /* always QUIET */
+ AUTH_TYPE_KEYBOARD_INTERACTIVE,
+ AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET
+ } type;
+ int done_service_req;
+ int gotit, need_pw, can_pubkey, can_passwd, can_keyb_inter;
+ int tried_pubkey_config, done_agent;
+#ifndef NO_GSSAPI
+ int can_gssapi;
+ int tried_gssapi;
+#endif
+ int kbd_inter_refused;
+ int we_are_in, userauth_success;
+ prompts_t *cur_prompt;
+ int num_prompts;
+ char *username;
+ char *password;
+ int got_username;
+ void *publickey_blob;
+ int publickey_bloblen;
+ int publickey_encrypted;
+ char *publickey_algorithm;
+ char *publickey_comment;
+ unsigned char agent_request[5], *agent_response, *agentp;
+ int agent_responselen;
+ unsigned char *pkblob_in_agent;
+ int keyi, nkeys;
+ char *pkblob, *alg, *commentp;
+ int pklen, alglen, commentlen;
+ int siglen, retlen, len;
+ char *q, *agentreq, *ret;
+ int try_send;
+ struct Packet *pktout;
+ Filename *keyfile;
+#ifndef NO_GSSAPI
+ struct ssh_gss_library *gsslib;
+ Ssh_gss_ctx gss_ctx;
+ Ssh_gss_buf gss_buf;
+ Ssh_gss_buf gss_rcvtok, gss_sndtok;
+ Ssh_gss_name gss_srv_name;
+ Ssh_gss_stat gss_stat;
+#endif
+ };
+ crState(do_ssh2_authconn_state);
+
+ crBeginState;
+
+ /* Register as a handler for all the messages this coroutine handles. */
+ ssh->packet_dispatch[SSH2_MSG_SERVICE_ACCEPT] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_REQUEST] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_FAILURE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_SUCCESS] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_PK_OK] = ssh2_msg_authconn;
+ /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ] = ssh2_msg_authconn; duplicate case value */
+ /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_REQUEST] = ssh2_msg_authconn; duplicate case value */
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_RESPONSE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_GLOBAL_REQUEST] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_REQUEST_SUCCESS] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_REQUEST_FAILURE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_CONFIRMATION] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_FAILURE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_WINDOW_ADJUST] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_DATA] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EXTENDED_DATA] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EOF] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_CLOSE] = ssh2_msg_authconn;
+
+ s->done_service_req = FALSE;
+ s->we_are_in = s->userauth_success = FALSE;
+#ifndef NO_GSSAPI
+ s->tried_gssapi = FALSE;
+#endif
+
+ if (!conf_get_int(ssh->conf, CONF_ssh_no_userauth)) {
+ /*
+ * Request userauth protocol, and await a response to it.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_SERVICE_REQUEST);
+ ssh2_pkt_addstring(s->pktout, "ssh-userauth");
+ ssh2_pkt_send(ssh, s->pktout);
+ crWaitUntilV(pktin);
+ if (pktin->type == SSH2_MSG_SERVICE_ACCEPT)
+ s->done_service_req = TRUE;
+ }
+ if (!s->done_service_req) {
+ /*
+ * Request connection protocol directly, without authentication.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_SERVICE_REQUEST);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ ssh2_pkt_send(ssh, s->pktout);
+ crWaitUntilV(pktin);
+ if (pktin->type == SSH2_MSG_SERVICE_ACCEPT) {
+ s->we_are_in = TRUE; /* no auth required */
+ } else {
+ bombout(("Server refused service request"));
+ crStopV;
+ }
+ }
+
+ /* Arrange to be able to deal with any BANNERs that come in.
+ * (We do this now as packets may come in during the next bit.) */
+ bufchain_init(&ssh->banner);
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] =
+ ssh2_msg_userauth_banner;
/*
- * Request userauth protocol, and await a response to it.
+ * Misc one-time setup for authentication.
*/
- ssh2_pkt_init(SSH2_MSG_SERVICE_REQUEST);
- ssh2_pkt_addstring("ssh-userauth");
- ssh2_pkt_send();
- crWaitUntilV(ispkt);
- if (pktin.type != SSH2_MSG_SERVICE_ACCEPT) {
- bombout(("Server refused user authentication protocol"));
- crReturnV;
+ s->publickey_blob = NULL;
+ if (!s->we_are_in) {
+
+ /*
+ * Load the public half of any configured public key file
+ * for later use.
+ */
+ s->keyfile = conf_get_filename(ssh->conf, CONF_keyfile);
+ if (!filename_is_null(s->keyfile)) {
+ int keytype;
+ logeventf(ssh, "Reading private key file \"%.150s\"",
+ filename_to_str(s->keyfile));
+ keytype = key_type(s->keyfile);
+ if (keytype == SSH_KEYTYPE_SSH2) {
+ const char *error;
+ s->publickey_blob =
+ ssh2_userkey_loadpub(s->keyfile,
+ &s->publickey_algorithm,
+ &s->publickey_bloblen,
+ &s->publickey_comment, &error);
+ if (s->publickey_blob) {
+ s->publickey_encrypted =
+ ssh2_userkey_encrypted(s->keyfile, NULL);
+ } else {
+ char *msgbuf;
+ logeventf(ssh, "Unable to load private key (%s)",
+ error);
+ msgbuf = dupprintf("Unable to load private key file "
+ "\"%.150s\" (%s)\r\n",
+ filename_to_str(s->keyfile),
+ error);
+ c_write_str(ssh, msgbuf);
+ sfree(msgbuf);
+ }
+ } else {
+ char *msgbuf;
+ logeventf(ssh, "Unable to use this key file (%s)",
+ key_type_to_str(keytype));
+ msgbuf = dupprintf("Unable to use key file \"%.150s\""
+ " (%s)\r\n",
+ filename_to_str(s->keyfile),
+ key_type_to_str(keytype));
+ c_write_str(ssh, msgbuf);
+ sfree(msgbuf);
+ s->publickey_blob = NULL;
+ }
+ }
+
+ /*
+ * Find out about any keys Pageant has (but if there's a
+ * public key configured, filter out all others).
+ */
+ s->nkeys = 0;
+ s->agent_response = NULL;
+ s->pkblob_in_agent = NULL;
+ if (conf_get_int(ssh->conf, CONF_tryagent) && agent_exists()) {
+
+ void *r;
+
+ logevent("Pageant is running. Requesting keys.");
+
+ /* Request the keys held by the agent. */
+ PUT_32BIT(s->agent_request, 1);
+ s->agent_request[4] = SSH2_AGENTC_REQUEST_IDENTITIES;
+ if (!agent_query(s->agent_request, 5, &r, &s->agent_responselen,
+ ssh_agent_callback, ssh)) {
+ do {
+ crReturnV;
+ if (pktin) {
+ bombout(("Unexpected data from server while"
+ " waiting for agent response"));
+ crStopV;
+ }
+ } while (pktin || inlen > 0);
+ r = ssh->agent_response;
+ s->agent_responselen = ssh->agent_response_len;
+ }
+ s->agent_response = (unsigned char *) r;
+ if (s->agent_response && s->agent_responselen >= 5 &&
+ s->agent_response[4] == SSH2_AGENT_IDENTITIES_ANSWER) {
+ int keyi;
+ unsigned char *p;
+ p = s->agent_response + 5;
+ s->nkeys = toint(GET_32BIT(p));
+
+ /*
+ * Vet the Pageant response to ensure that the key
+ * count and blob lengths make sense.
+ */
+ if (s->nkeys < 0) {
+ logeventf(ssh, "Pageant response contained a negative"
+ " key count %d", s->nkeys);
+ s->nkeys = 0;
+ goto done_agent_query;
+ } else {
+ unsigned char *q = p + 4;
+ int lenleft = s->agent_responselen - 5 - 4;
+
+ for (keyi = 0; keyi < s->nkeys; keyi++) {
+ int bloblen, commentlen;
+ if (lenleft < 4) {
+ logeventf(ssh, "Pageant response was truncated");
+ s->nkeys = 0;
+ goto done_agent_query;
+ }
+ bloblen = toint(GET_32BIT(q));
+ if (bloblen < 0 || bloblen > lenleft) {
+ logeventf(ssh, "Pageant response was truncated");
+ s->nkeys = 0;
+ goto done_agent_query;
+ }
+ lenleft -= 4 + bloblen;
+ q += 4 + bloblen;
+ commentlen = toint(GET_32BIT(q));
+ if (commentlen < 0 || commentlen > lenleft) {
+ logeventf(ssh, "Pageant response was truncated");
+ s->nkeys = 0;
+ goto done_agent_query;
+ }
+ lenleft -= 4 + commentlen;
+ q += 4 + commentlen;
+ }
+ }
+
+ p += 4;
+ logeventf(ssh, "Pageant has %d SSH-2 keys", s->nkeys);
+ if (s->publickey_blob) {
+ /* See if configured key is in agent. */
+ for (keyi = 0; keyi < s->nkeys; keyi++) {
+ s->pklen = toint(GET_32BIT(p));
+ if (s->pklen == s->publickey_bloblen &&
+ !memcmp(p+4, s->publickey_blob,
+ s->publickey_bloblen)) {
+ logeventf(ssh, "Pageant key #%d matches "
+ "configured key file", keyi);
+ s->keyi = keyi;
+ s->pkblob_in_agent = p;
+ break;
+ }
+ p += 4 + s->pklen;
+ p += toint(GET_32BIT(p)) + 4; /* comment */
+ }
+ if (!s->pkblob_in_agent) {
+ logevent("Configured key file not in Pageant");
+ s->nkeys = 0;
+ }
+ }
+ } else {
+ logevent("Failed to get reply from Pageant");
+ }
+ done_agent_query:;
+ }
+
}
/*
* We repeat this whole loop, including the username prompt,
* until we manage a successful authentication. If the user
- * types the wrong _password_, they are sent back to the
- * beginning to try another username. (If they specify a
- * username in the config, they are never asked, even if they
- * do give a wrong password.)
+ * types the wrong _password_, they can be sent back to the
+ * beginning to try another username, if this is configured on.
+ * (If they specify a username in the config, they are never
+ * asked, even if they do give a wrong password.)
*
* I think this best serves the needs of
*
* the username they will want to be able to get back and
* retype it!
*/
- username[0] = '\0';
- got_username = FALSE;
- do {
+ s->got_username = FALSE;
+ while (!s->we_are_in) {
/*
* Get a username.
*/
- if (got_username && !cfg.change_username) {
+ if (s->got_username && !conf_get_int(ssh->conf, CONF_change_username)) {
/*
* We got a username last time round this loop, and
* with change_username turned off we don't try to get
* it again.
*/
- } else if ((flags & FLAG_INTERACTIVE) && !*cfg.username) {
- if (ssh_get_line && !ssh_getline_pw_only) {
- if (!ssh_get_line("login as: ",
- username, sizeof(username), FALSE)) {
- /*
- * get_line failed to get a username.
- * Terminate.
- */
- logevent("No username provided. Abandoning session.");
- ssh_state = SSH_STATE_CLOSED;
- crReturnV;
- }
- } else {
- static int ret;
- c_write_str("login as: ");
- ssh_send_ok = 1;
- setup_userpass_input(username, sizeof(username), 1);
- do {
- crWaitUntilV(!ispkt);
- ret = process_userpass_input(in, inlen);
- } while (ret == 0);
- if (ret < 0)
- cleanup_exit(0);
+ } else if ((ssh->username = get_remote_username(ssh->conf)) == NULL) {
+ int ret; /* need not be kept over crReturn */
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH login name");
+ add_prompt(s->cur_prompt, dupstr("login as: "), TRUE);
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntilV(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
+ }
+ if (!ret) {
+ /*
+ * get_userpass_input() failed to get a username.
+ * Terminate.
+ */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, "No username provided", NULL, 0, TRUE);
+ crStopV;
}
- c_write_str("\r\n");
- username[strcspn(username, "\n\r")] = '\0';
+ ssh->username = dupstr(s->cur_prompt->prompts[0]->result);
+ free_prompts(s->cur_prompt);
} else {
- char stuff[200];
- strncpy(username, cfg.username, sizeof(username));
- username[sizeof(username)-1] = '\0';
+ char *stuff;
if ((flags & FLAG_VERBOSE) || (flags & FLAG_INTERACTIVE)) {
- sprintf(stuff, "Using username \"%s\".\r\n", username);
- c_write_str(stuff);
+ stuff = dupprintf("Using username \"%s\".\r\n", ssh->username);
+ c_write_str(ssh, stuff);
+ sfree(stuff);
}
}
- got_username = TRUE;
+ s->got_username = TRUE;
/*
* Send an authentication request using method "none": (a)
* just in case it succeeds, and (b) so that we know what
* authentication methods we can usefully try next.
*/
- ssh_pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
-
- ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(username);
- ssh2_pkt_addstring("ssh-connection"); /* service requested */
- ssh2_pkt_addstring("none"); /* method */
- ssh2_pkt_send();
- type = AUTH_TYPE_NONE;
- gotit = FALSE;
- we_are_in = FALSE;
-
- tried_pubkey_config = FALSE;
- tried_agent = FALSE;
- tried_keyb_inter = FALSE;
- kbd_inter_running = FALSE;
- /* Load the pub half of cfg.keyfile so we notice if it's in Pageant */
- if (*cfg.keyfile) {
- int keytype;
- logeventf("Reading private key file \"%.150s\"", cfg.keyfile);
- keytype = key_type(cfg.keyfile);
- if (keytype == SSH_KEYTYPE_SSH2)
- publickey_blob = ssh2_userkey_loadpub(cfg.keyfile, NULL,
- &publickey_bloblen);
- else {
- char msgbuf[256];
- logeventf("Unable to use this key file (%s)",
- key_type_to_str(keytype));
- sprintf(msgbuf, "Unable to use key file \"%.150s\" (%s)\r\n",
- cfg.keyfile, key_type_to_str(keytype));
- c_write_str(msgbuf);
- publickey_blob = NULL;
+ ssh->pkt_actx = SSH2_PKTCTX_NOAUTH;
+
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");/* service requested */
+ ssh2_pkt_addstring(s->pktout, "none"); /* method */
+ ssh2_pkt_send(ssh, s->pktout);
+ s->type = AUTH_TYPE_NONE;
+ s->gotit = FALSE;
+ s->we_are_in = FALSE;
+
+ s->tried_pubkey_config = FALSE;
+ s->kbd_inter_refused = FALSE;
+
+ /* Reset agent request state. */
+ s->done_agent = FALSE;
+ if (s->agent_response) {
+ if (s->pkblob_in_agent) {
+ s->agentp = s->pkblob_in_agent;
+ } else {
+ s->agentp = s->agent_response + 5 + 4;
+ s->keyi = 0;
}
- } else
- publickey_blob = NULL;
+ }
while (1) {
+ char *methods = NULL;
+ int methlen = 0;
+
/*
* Wait for the result of the last authentication request.
*/
- if (!gotit)
- crWaitUntilV(ispkt);
- while (pktin.type == SSH2_MSG_USERAUTH_BANNER) {
- char *banner;
- int size;
+ if (!s->gotit)
+ crWaitUntilV(pktin);
+ /*
+ * Now is a convenient point to spew any banner material
+ * that we've accumulated. (This should ensure that when
+ * we exit the auth loop, we haven't any left to deal
+ * with.)
+ */
+ {
+ int size = bufchain_size(&ssh->banner);
/*
* Don't show the banner if we're operating in
* non-verbose non-interactive mode. (It's probably
* the banner will screw up processing on the
* output of (say) plink.)
*/
- if (flags & (FLAG_VERBOSE | FLAG_INTERACTIVE)) {
- ssh2_pkt_getstring(&banner, &size);
- if (banner)
- c_write_untrusted(banner, size);
+ if (size && (flags & (FLAG_VERBOSE | FLAG_INTERACTIVE))) {
+ char *banner = snewn(size, char);
+ bufchain_fetch(&ssh->banner, banner, size);
+ c_write_untrusted(ssh, banner, size);
+ sfree(banner);
}
- crWaitUntilV(ispkt);
+ bufchain_clear(&ssh->banner);
}
- if (pktin.type == SSH2_MSG_USERAUTH_SUCCESS) {
+ if (pktin->type == SSH2_MSG_USERAUTH_SUCCESS) {
logevent("Access granted");
- we_are_in = TRUE;
+ s->we_are_in = s->userauth_success = TRUE;
break;
}
- if (kbd_inter_running &&
- pktin.type == SSH2_MSG_USERAUTH_INFO_REQUEST) {
- /*
- * This is either a further set-of-prompts packet
- * in keyboard-interactive authentication, or it's
- * the same one and we came back here with `gotit'
- * set. In the former case, we must reset the
- * curr_prompt variable.
- */
- if (!gotit)
- curr_prompt = 0;
- } else if (pktin.type != SSH2_MSG_USERAUTH_FAILURE) {
- bombout(("Strange packet received during authentication: type %d",
- pktin.type));
- crReturnV;
+ if (pktin->type != SSH2_MSG_USERAUTH_FAILURE && s->type != AUTH_TYPE_GSSAPI) {
+ bombout(("Strange packet received during authentication: "
+ "type %d", pktin->type));
+ crStopV;
}
- gotit = FALSE;
+ s->gotit = FALSE;
/*
* OK, we're now sitting on a USERAUTH_FAILURE message, so
* we can look at the string in it and know what we can
* helpfully try next.
*/
- if (pktin.type == SSH2_MSG_USERAUTH_FAILURE) {
- char *methods;
- int methlen;
- ssh2_pkt_getstring(&methods, &methlen);
- kbd_inter_running = FALSE;
- if (!ssh2_pkt_getbool()) {
+ if (pktin->type == SSH2_MSG_USERAUTH_FAILURE) {
+ ssh_pkt_getstring(pktin, &methods, &methlen);
+ if (!ssh2_pkt_getbool(pktin)) {
/*
* We have received an unequivocal Access
* Denied. This can translate to a variety of
- * messages:
- *
- * - if we'd just tried "none" authentication,
- * it's not worth printing anything at all
- *
- * - if we'd just tried a public key _offer_,
- * the message should be "Server refused our
- * key" (or no message at all if the key
- * came from Pageant)
- *
- * - if we'd just tried anything else, the
- * message really should be "Access denied".
- *
+ * messages, or no message at all.
+ *
+ * For forms of authentication which are attempted
+ * implicitly, by which I mean without printing
+ * anything in the window indicating that we're
+ * trying them, we should never print 'Access
+ * denied'.
+ *
+ * If we do print a message saying that we're
+ * attempting some kind of authentication, it's OK
+ * to print a followup message saying it failed -
+ * but the message may sometimes be more specific
+ * than simply 'Access denied'.
+ *
* Additionally, if we'd just tried password
* authentication, we should break out of this
* whole loop so as to go back to the username
- * prompt.
+ * prompt (iff we're configured to allow
+ * username change attempts).
*/
- if (type == AUTH_TYPE_NONE) {
+ if (s->type == AUTH_TYPE_NONE) {
/* do nothing */
- } else if (type == AUTH_TYPE_PUBLICKEY_OFFER_LOUD ||
- type == AUTH_TYPE_PUBLICKEY_OFFER_QUIET) {
- if (type == AUTH_TYPE_PUBLICKEY_OFFER_LOUD)
- c_write_str("Server refused our key\r\n");
- logevent("Server refused public key");
- } else if (type == AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET) {
- /* server declined keyboard-interactive; ignore */
- } else {
- c_write_str("Access denied\r\n");
- logevent("Access denied");
- if (type == AUTH_TYPE_PASSWORD) {
- we_are_in = FALSE;
+ } else if (s->type == AUTH_TYPE_PUBLICKEY_OFFER_LOUD ||
+ s->type == AUTH_TYPE_PUBLICKEY_OFFER_QUIET) {
+ if (s->type == AUTH_TYPE_PUBLICKEY_OFFER_LOUD)
+ c_write_str(ssh, "Server refused our key\r\n");
+ logevent("Server refused our key");
+ } else if (s->type == AUTH_TYPE_PUBLICKEY) {
+ /* This _shouldn't_ happen except by a
+ * protocol bug causing client and server to
+ * disagree on what is a correct signature. */
+ c_write_str(ssh, "Server refused public-key signature"
+ " despite accepting key!\r\n");
+ logevent("Server refused public-key signature"
+ " despite accepting key!");
+ } else if (s->type==AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET) {
+ /* quiet, so no c_write */
+ logevent("Server refused keyboard-interactive authentication");
+ } else if (s->type==AUTH_TYPE_GSSAPI) {
+ /* always quiet, so no c_write */
+ /* also, the code down in the GSSAPI block has
+ * already logged this in the Event Log */
+ } else if (s->type == AUTH_TYPE_KEYBOARD_INTERACTIVE) {
+ logevent("Keyboard-interactive authentication failed");
+ c_write_str(ssh, "Access denied\r\n");
+ } else {
+ assert(s->type == AUTH_TYPE_PASSWORD);
+ logevent("Password authentication failed");
+ c_write_str(ssh, "Access denied\r\n");
+
+ if (conf_get_int(ssh->conf, CONF_change_username)) {
+ /* XXX perhaps we should allow
+ * keyboard-interactive to do this too? */
+ s->we_are_in = FALSE;
break;
}
}
} else {
- c_write_str("Further authentication required\r\n");
+ c_write_str(ssh, "Further authentication required\r\n");
logevent("Further authentication required");
}
- can_pubkey =
+ s->can_pubkey =
in_commasep_string("publickey", methods, methlen);
- can_passwd =
+ s->can_passwd =
in_commasep_string("password", methods, methlen);
- can_keyb_inter = cfg.try_ki_auth &&
+ s->can_keyb_inter = conf_get_int(ssh->conf, CONF_try_ki_auth) &&
in_commasep_string("keyboard-interactive", methods, methlen);
+#ifndef NO_GSSAPI
+ if (!ssh->gsslibs)
+ ssh->gsslibs = ssh_gss_setup(ssh->conf);
+ s->can_gssapi = conf_get_int(ssh->conf, CONF_try_gssapi_auth) &&
+ in_commasep_string("gssapi-with-mic", methods, methlen) &&
+ ssh->gsslibs->nlibraries > 0;
+#endif
}
- method = 0;
- ssh_pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
+ ssh->pkt_actx = SSH2_PKTCTX_NOAUTH;
- /*
- * Most password/passphrase prompts will be
- * non-echoing, so we set this to 0 by default.
- * Exception is that some keyboard-interactive prompts
- * can be echoing, in which case we'll set this to 1.
- */
- echo = 0;
+ if (s->can_pubkey && !s->done_agent && s->nkeys) {
- if (!method && can_pubkey && agent_exists() && !tried_agent) {
/*
- * Attempt public-key authentication using Pageant.
+ * Attempt public-key authentication using a key from Pageant.
*/
- static unsigned char request[5], *response, *p;
- static int responselen;
- static int i, nkeys;
- static int authed = FALSE;
- void *r;
-
- ssh_pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh_pkt_ctx |= SSH2_PKTCTX_PUBLICKEY;
-
- tried_agent = TRUE;
-
- logevent("Pageant is running. Requesting keys.");
-
- /* Request the keys held by the agent. */
- PUT_32BIT(request, 1);
- request[4] = SSH2_AGENTC_REQUEST_IDENTITIES;
- agent_query(request, 5, &r, &responselen);
- response = (unsigned char *) r;
- if (response && responselen >= 5 &&
- response[4] == SSH2_AGENT_IDENTITIES_ANSWER) {
- p = response + 5;
- nkeys = GET_32BIT(p);
- p += 4;
- {
- char buf[64];
- sprintf(buf, "Pageant has %d SSH2 keys", nkeys);
- logevent(buf);
+
+ ssh->pkt_actx = SSH2_PKTCTX_PUBLICKEY;
+
+ logeventf(ssh, "Trying Pageant key #%d", s->keyi);
+
+ /* Unpack key from agent response */
+ s->pklen = toint(GET_32BIT(s->agentp));
+ s->agentp += 4;
+ s->pkblob = (char *)s->agentp;
+ s->agentp += s->pklen;
+ s->alglen = toint(GET_32BIT(s->pkblob));
+ s->alg = s->pkblob + 4;
+ s->commentlen = toint(GET_32BIT(s->agentp));
+ s->agentp += 4;
+ s->commentp = (char *)s->agentp;
+ s->agentp += s->commentlen;
+ /* s->agentp now points at next key, if any */
+
+ /* See if server will accept it */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "publickey");
+ /* method */
+ ssh2_pkt_addbool(s->pktout, FALSE); /* no signature included */
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
+ ssh2_pkt_send(ssh, s->pktout);
+ s->type = AUTH_TYPE_PUBLICKEY_OFFER_QUIET;
+
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
+
+ /* Offer of key refused. */
+ s->gotit = TRUE;
+
+ } else {
+
+ void *vret;
+
+ if (flags & FLAG_VERBOSE) {
+ c_write_str(ssh, "Authenticating with "
+ "public key \"");
+ c_write(ssh, s->commentp, s->commentlen);
+ c_write_str(ssh, "\" from agent\r\n");
}
- for (i = 0; i < nkeys; i++) {
- static char *pkblob, *alg, *commentp;
- static int pklen, alglen, commentlen;
- static int siglen, retlen, len;
- static char *q, *agentreq, *ret;
- void *vret;
- {
- char buf[64];
- sprintf(buf, "Trying Pageant key #%d", i);
- logevent(buf);
+ /*
+ * Server is willing to accept the key.
+ * Construct a SIGN_REQUEST.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "publickey");
+ /* method */
+ ssh2_pkt_addbool(s->pktout, TRUE); /* signature included */
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
+
+ /* Ask agent for signature. */
+ s->siglen = s->pktout->length - 5 + 4 +
+ ssh->v2_session_id_len;
+ if (ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)
+ s->siglen -= 4;
+ s->len = 1; /* message type */
+ s->len += 4 + s->pklen; /* key blob */
+ s->len += 4 + s->siglen; /* data to sign */
+ s->len += 4; /* flags */
+ s->agentreq = snewn(4 + s->len, char);
+ PUT_32BIT(s->agentreq, s->len);
+ s->q = s->agentreq + 4;
+ *s->q++ = SSH2_AGENTC_SIGN_REQUEST;
+ PUT_32BIT(s->q, s->pklen);
+ s->q += 4;
+ memcpy(s->q, s->pkblob, s->pklen);
+ s->q += s->pklen;
+ PUT_32BIT(s->q, s->siglen);
+ s->q += 4;
+ /* Now the data to be signed... */
+ if (!(ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)) {
+ PUT_32BIT(s->q, ssh->v2_session_id_len);
+ s->q += 4;
+ }
+ memcpy(s->q, ssh->v2_session_id,
+ ssh->v2_session_id_len);
+ s->q += ssh->v2_session_id_len;
+ memcpy(s->q, s->pktout->data + 5,
+ s->pktout->length - 5);
+ s->q += s->pktout->length - 5;
+ /* And finally the (zero) flags word. */
+ PUT_32BIT(s->q, 0);
+ if (!agent_query(s->agentreq, s->len + 4,
+ &vret, &s->retlen,
+ ssh_agent_callback, ssh)) {
+ do {
+ crReturnV;
+ if (pktin) {
+ bombout(("Unexpected data from server"
+ " while waiting for agent"
+ " response"));
+ crStopV;
+ }
+ } while (pktin || inlen > 0);
+ vret = ssh->agent_response;
+ s->retlen = ssh->agent_response_len;
+ }
+ s->ret = vret;
+ sfree(s->agentreq);
+ if (s->ret) {
+ if (s->retlen >= 9 &&
+ s->ret[4] == SSH2_AGENT_SIGN_RESPONSE &&
+ GET_32BIT(s->ret + 5) <= (unsigned)(s->retlen-9)) {
+ logevent("Sending Pageant's response");
+ ssh2_add_sigblob(ssh, s->pktout,
+ s->pkblob, s->pklen,
+ s->ret + 9,
+ GET_32BIT(s->ret + 5));
+ ssh2_pkt_send(ssh, s->pktout);
+ s->type = AUTH_TYPE_PUBLICKEY;
+ } else {
+ /* FIXME: less drastic response */
+ bombout(("Pageant failed to answer challenge"));
+ crStopV;
}
- pklen = GET_32BIT(p);
- p += 4;
- if (publickey_blob &&
- pklen == publickey_bloblen &&
- !memcmp(p, publickey_blob, publickey_bloblen)) {
- logevent("This key matches configured key file");
- tried_pubkey_config = 1;
+ }
+ }
+
+ /* Do we have any keys left to try? */
+ if (s->pkblob_in_agent) {
+ s->done_agent = TRUE;
+ s->tried_pubkey_config = TRUE;
+ } else {
+ s->keyi++;
+ if (s->keyi >= s->nkeys)
+ s->done_agent = TRUE;
+ }
+
+ } else if (s->can_pubkey && s->publickey_blob &&
+ !s->tried_pubkey_config) {
+
+ struct ssh2_userkey *key; /* not live over crReturn */
+ char *passphrase; /* not live over crReturn */
+
+ ssh->pkt_actx = SSH2_PKTCTX_PUBLICKEY;
+
+ s->tried_pubkey_config = TRUE;
+
+ /*
+ * Try the public key supplied in the configuration.
+ *
+ * First, offer the public blob to see if the server is
+ * willing to accept it.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
+ ssh2_pkt_addbool(s->pktout, FALSE);
+ /* no signature included */
+ ssh2_pkt_addstring(s->pktout, s->publickey_algorithm);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout,
+ (char *)s->publickey_blob,
+ s->publickey_bloblen);
+ ssh2_pkt_send(ssh, s->pktout);
+ logevent("Offered public key");
+
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
+ /* Key refused. Give up. */
+ s->gotit = TRUE; /* reconsider message next loop */
+ s->type = AUTH_TYPE_PUBLICKEY_OFFER_LOUD;
+ continue; /* process this new message */
+ }
+ logevent("Offer of public key accepted");
+
+ /*
+ * Actually attempt a serious authentication using
+ * the key.
+ */
+ if (flags & FLAG_VERBOSE) {
+ c_write_str(ssh, "Authenticating with public key \"");
+ c_write_str(ssh, s->publickey_comment);
+ c_write_str(ssh, "\"\r\n");
+ }
+ key = NULL;
+ while (!key) {
+ const char *error; /* not live over crReturn */
+ if (s->publickey_encrypted) {
+ /*
+ * Get a passphrase from the user.
+ */
+ int ret; /* need not be kept over crReturn */
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = FALSE;
+ s->cur_prompt->name = dupstr("SSH key passphrase");
+ add_prompt(s->cur_prompt,
+ dupprintf("Passphrase for key \"%.100s\": ",
+ s->publickey_comment),
+ FALSE);
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntilV(!pktin);
+ ret = get_userpass_input(s->cur_prompt,
+ in, inlen);
+ ssh->send_ok = 0;
}
- pkblob = p;
- p += pklen;
- alglen = GET_32BIT(pkblob);
- alg = pkblob + 4;
- commentlen = GET_32BIT(p);
- p += 4;
- commentp = p;
- p += commentlen;
- ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(username);
- ssh2_pkt_addstring("ssh-connection"); /* service requested */
- ssh2_pkt_addstring("publickey"); /* method */
- ssh2_pkt_addbool(FALSE); /* no signature included */
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data(alg, alglen);
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data(pkblob, pklen);
- ssh2_pkt_send();
-
- crWaitUntilV(ispkt);
- if (pktin.type != SSH2_MSG_USERAUTH_PK_OK) {
- logevent("Key refused");
- continue;
+ if (!ret) {
+ /* Failed to get a passphrase. Terminate. */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, NULL,
+ "Unable to authenticate",
+ SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER,
+ TRUE);
+ crStopV;
}
+ passphrase =
+ dupstr(s->cur_prompt->prompts[0]->result);
+ free_prompts(s->cur_prompt);
+ } else {
+ passphrase = NULL; /* no passphrase needed */
+ }
- if (flags & FLAG_VERBOSE) {
- c_write_str
- ("Authenticating with public key \"");
- c_write(commentp, commentlen);
- c_write_str("\" from agent\r\n");
+ /*
+ * Try decrypting the key.
+ */
+ s->keyfile = conf_get_filename(ssh->conf, CONF_keyfile);
+ key = ssh2_load_userkey(s->keyfile, passphrase, &error);
+ if (passphrase) {
+ /* burn the evidence */
+ smemclr(passphrase, strlen(passphrase));
+ sfree(passphrase);
+ }
+ if (key == SSH2_WRONG_PASSPHRASE || key == NULL) {
+ if (passphrase &&
+ (key == SSH2_WRONG_PASSPHRASE)) {
+ c_write_str(ssh, "Wrong passphrase\r\n");
+ key = NULL;
+ /* and loop again */
+ } else {
+ c_write_str(ssh, "Unable to load private key (");
+ c_write_str(ssh, error);
+ c_write_str(ssh, ")\r\n");
+ key = NULL;
+ break; /* try something else */
}
+ }
+ }
- /*
- * Server is willing to accept the key.
- * Construct a SIGN_REQUEST.
- */
- ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(username);
- ssh2_pkt_addstring("ssh-connection"); /* service requested */
- ssh2_pkt_addstring("publickey"); /* method */
- ssh2_pkt_addbool(TRUE);
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data(alg, alglen);
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data(pkblob, pklen);
-
- siglen = pktout.length - 5 + 4 + 20;
- len = 1; /* message type */
- len += 4 + pklen; /* key blob */
- len += 4 + siglen; /* data to sign */
- len += 4; /* flags */
- agentreq = smalloc(4 + len);
- PUT_32BIT(agentreq, len);
- q = agentreq + 4;
- *q++ = SSH2_AGENTC_SIGN_REQUEST;
- PUT_32BIT(q, pklen);
- q += 4;
- memcpy(q, pkblob, pklen);
- q += pklen;
- PUT_32BIT(q, siglen);
- q += 4;
- /* Now the data to be signed... */
- PUT_32BIT(q, 20);
- q += 4;
- memcpy(q, ssh2_session_id, 20);
- q += 20;
- memcpy(q, pktout.data + 5, pktout.length - 5);
- q += pktout.length - 5;
- /* And finally the (zero) flags word. */
- PUT_32BIT(q, 0);
- agent_query(agentreq, len + 4, &vret, &retlen);
- ret = vret;
- sfree(agentreq);
- if (ret) {
- if (ret[4] == SSH2_AGENT_SIGN_RESPONSE) {
- logevent("Sending Pageant's response");
- ssh2_add_sigblob(pkblob, pklen,
- ret + 9, GET_32BIT(ret + 5));
- ssh2_pkt_send();
- authed = TRUE;
- break;
- } else {
- logevent
- ("Pageant failed to answer challenge");
- sfree(ret);
+ if (key) {
+ unsigned char *pkblob, *sigblob, *sigdata;
+ int pkblob_len, sigblob_len, sigdata_len;
+ int p;
+
+ /*
+ * We have loaded the private key and the server
+ * has announced that it's willing to accept it.
+ * Hallelujah. Generate a signature and send it.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "publickey");
+ /* method */
+ ssh2_pkt_addbool(s->pktout, TRUE);
+ /* signature follows */
+ ssh2_pkt_addstring(s->pktout, key->alg->name);
+ pkblob = key->alg->public_blob(key->data,
+ &pkblob_len);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, (char *)pkblob,
+ pkblob_len);
+
+ /*
+ * The data to be signed is:
+ *
+ * string session-id
+ *
+ * followed by everything so far placed in the
+ * outgoing packet.
+ */
+ sigdata_len = s->pktout->length - 5 + 4 +
+ ssh->v2_session_id_len;
+ if (ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)
+ sigdata_len -= 4;
+ sigdata = snewn(sigdata_len, unsigned char);
+ p = 0;
+ if (!(ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)) {
+ PUT_32BIT(sigdata+p, ssh->v2_session_id_len);
+ p += 4;
+ }
+ memcpy(sigdata+p, ssh->v2_session_id,
+ ssh->v2_session_id_len);
+ p += ssh->v2_session_id_len;
+ memcpy(sigdata+p, s->pktout->data + 5,
+ s->pktout->length - 5);
+ p += s->pktout->length - 5;
+ assert(p == sigdata_len);
+ sigblob = key->alg->sign(key->data, (char *)sigdata,
+ sigdata_len, &sigblob_len);
+ ssh2_add_sigblob(ssh, s->pktout, pkblob, pkblob_len,
+ sigblob, sigblob_len);
+ sfree(pkblob);
+ sfree(sigblob);
+ sfree(sigdata);
+
+ ssh2_pkt_send(ssh, s->pktout);
+ logevent("Sent public key signature");
+ s->type = AUTH_TYPE_PUBLICKEY;
+ key->alg->freekey(key->data);
+ }
+
+#ifndef NO_GSSAPI
+ } else if (s->can_gssapi && !s->tried_gssapi) {
+
+ /* GSSAPI Authentication */
+
+ int micoffset, len;
+ char *data;
+ Ssh_gss_buf mic;
+ s->type = AUTH_TYPE_GSSAPI;
+ s->tried_gssapi = TRUE;
+ s->gotit = TRUE;
+ ssh->pkt_actx = SSH2_PKTCTX_GSSAPI;
+
+ /*
+ * Pick the highest GSS library on the preference
+ * list.
+ */
+ {
+ int i, j;
+ s->gsslib = NULL;
+ for (i = 0; i < ngsslibs; i++) {
+ int want_id = conf_get_int_int(ssh->conf,
+ CONF_ssh_gsslist, i);
+ for (j = 0; j < ssh->gsslibs->nlibraries; j++)
+ if (ssh->gsslibs->libraries[j].id == want_id) {
+ s->gsslib = &ssh->gsslibs->libraries[j];
+ goto got_gsslib; /* double break */
}
- }
}
- if (authed)
- continue;
+ got_gsslib:
+ /*
+ * We always expect to have found something in
+ * the above loop: we only came here if there
+ * was at least one viable GSS library, and the
+ * preference list should always mention
+ * everything and only change the order.
+ */
+ assert(s->gsslib);
+ }
+
+ if (s->gsslib->gsslogmsg)
+ logevent(s->gsslib->gsslogmsg);
+
+ /* Sending USERAUTH_REQUEST with "gssapi-with-mic" method */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ ssh2_pkt_addstring(s->pktout, "gssapi-with-mic");
+ logevent("Attempting GSSAPI authentication");
+
+ /* add mechanism info */
+ s->gsslib->indicate_mech(s->gsslib, &s->gss_buf);
+
+ /* number of GSSAPI mechanisms */
+ ssh2_pkt_adduint32(s->pktout,1);
+
+ /* length of OID + 2 */
+ ssh2_pkt_adduint32(s->pktout, s->gss_buf.length + 2);
+ ssh2_pkt_addbyte(s->pktout, SSH2_GSS_OIDTYPE);
+
+ /* length of OID */
+ ssh2_pkt_addbyte(s->pktout, (unsigned char) s->gss_buf.length);
+
+ ssh_pkt_adddata(s->pktout, s->gss_buf.value,
+ s->gss_buf.length);
+ ssh2_pkt_send(ssh, s->pktout);
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_GSSAPI_RESPONSE) {
+ logevent("GSSAPI authentication request refused");
+ continue;
+ }
+
+ /* check returned packet ... */
+
+ ssh_pkt_getstring(pktin, &data, &len);
+ s->gss_rcvtok.value = data;
+ s->gss_rcvtok.length = len;
+ if (s->gss_rcvtok.length != s->gss_buf.length + 2 ||
+ ((char *)s->gss_rcvtok.value)[0] != SSH2_GSS_OIDTYPE ||
+ ((char *)s->gss_rcvtok.value)[1] != s->gss_buf.length ||
+ memcmp((char *)s->gss_rcvtok.value + 2,
+ s->gss_buf.value,s->gss_buf.length) ) {
+ logevent("GSSAPI authentication - wrong response from server");
+ continue;
+ }
+
+ /* now start running */
+ s->gss_stat = s->gsslib->import_name(s->gsslib,
+ ssh->fullhostname,
+ &s->gss_srv_name);
+ if (s->gss_stat != SSH_GSS_OK) {
+ if (s->gss_stat == SSH_GSS_BAD_HOST_NAME)
+ logevent("GSSAPI import name failed - Bad service name");
+ else
+ logevent("GSSAPI import name failed");
+ continue;
+ }
+
+ /* fetch TGT into GSS engine */
+ s->gss_stat = s->gsslib->acquire_cred(s->gsslib, &s->gss_ctx);
+
+ if (s->gss_stat != SSH_GSS_OK) {
+ logevent("GSSAPI authentication failed to get credentials");
+ s->gsslib->release_name(s->gsslib, &s->gss_srv_name);
+ continue;
}
- }
- if (!method && can_pubkey && publickey_blob
- && !tried_pubkey_config) {
- unsigned char *pub_blob;
- char *algorithm, *comment;
- int pub_blob_len;
+ /* initial tokens are empty */
+ SSH_GSS_CLEAR_BUF(&s->gss_rcvtok);
+ SSH_GSS_CLEAR_BUF(&s->gss_sndtok);
- tried_pubkey_config = TRUE;
+ /* now enter the loop */
+ do {
+ s->gss_stat = s->gsslib->init_sec_context
+ (s->gsslib,
+ &s->gss_ctx,
+ s->gss_srv_name,
+ conf_get_int(ssh->conf, CONF_gssapifwd),
+ &s->gss_rcvtok,
+ &s->gss_sndtok);
+
+ if (s->gss_stat!=SSH_GSS_S_COMPLETE &&
+ s->gss_stat!=SSH_GSS_S_CONTINUE_NEEDED) {
+ logevent("GSSAPI authentication initialisation failed");
+
+ if (s->gsslib->display_status(s->gsslib, s->gss_ctx,
+ &s->gss_buf) == SSH_GSS_OK) {
+ logevent(s->gss_buf.value);
+ sfree(s->gss_buf.value);
+ }
- ssh_pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh_pkt_ctx |= SSH2_PKTCTX_PUBLICKEY;
+ break;
+ }
+ logevent("GSSAPI authentication initialised");
- /*
- * Try the public key supplied in the configuration.
- *
- * First, offer the public blob to see if the server is
- * willing to accept it.
- */
- pub_blob = ssh2_userkey_loadpub(cfg.keyfile, &algorithm,
- &pub_blob_len);
- if (pub_blob) {
- ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(username);
- ssh2_pkt_addstring("ssh-connection"); /* service requested */
- ssh2_pkt_addstring("publickey"); /* method */
- ssh2_pkt_addbool(FALSE); /* no signature included */
- ssh2_pkt_addstring(algorithm);
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data(pub_blob, pub_blob_len);
- ssh2_pkt_send();
- logevent("Offered public key"); /* FIXME */
-
- crWaitUntilV(ispkt);
- if (pktin.type != SSH2_MSG_USERAUTH_PK_OK) {
- gotit = TRUE;
- type = AUTH_TYPE_PUBLICKEY_OFFER_LOUD;
- continue; /* key refused; give up on it */
+ /* Client and server now exchange tokens until GSSAPI
+ * no longer says CONTINUE_NEEDED */
+
+ if (s->gss_sndtok.length != 0) {
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_GSSAPI_TOKEN);
+ ssh_pkt_addstring_start(s->pktout);
+ ssh_pkt_addstring_data(s->pktout,s->gss_sndtok.value,s->gss_sndtok.length);
+ ssh2_pkt_send(ssh, s->pktout);
+ s->gsslib->free_tok(s->gsslib, &s->gss_sndtok);
}
- logevent("Offer of public key accepted");
- /*
- * Actually attempt a serious authentication using
- * the key.
- */
- if (ssh2_userkey_encrypted(cfg.keyfile, &comment)) {
- sprintf(pwprompt,
- "Passphrase for key \"%.100s\": ",
- comment);
- need_pw = TRUE;
- } else {
- need_pw = FALSE;
+ if (s->gss_stat == SSH_GSS_S_CONTINUE_NEEDED) {
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_GSSAPI_TOKEN) {
+ logevent("GSSAPI authentication - bad server response");
+ s->gss_stat = SSH_GSS_FAILURE;
+ break;
+ }
+ ssh_pkt_getstring(pktin, &data, &len);
+ s->gss_rcvtok.value = data;
+ s->gss_rcvtok.length = len;
}
- c_write_str("Authenticating with public key \"");
- c_write_str(comment);
- c_write_str("\"\r\n");
- method = AUTH_PUBLICKEY_FILE;
- }
- }
+ } while (s-> gss_stat == SSH_GSS_S_CONTINUE_NEEDED);
- if (!method && can_keyb_inter && !tried_keyb_inter) {
- method = AUTH_KEYBOARD_INTERACTIVE;
- type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
- tried_keyb_inter = TRUE;
-
- ssh_pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh_pkt_ctx |= SSH2_PKTCTX_KBDINTER;
-
- ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(username);
- ssh2_pkt_addstring("ssh-connection"); /* service requested */
- ssh2_pkt_addstring("keyboard-interactive"); /* method */
- ssh2_pkt_addstring(""); /* lang */
- ssh2_pkt_addstring("");
- ssh2_pkt_send();
-
- crWaitUntilV(ispkt);
- if (pktin.type != SSH2_MSG_USERAUTH_INFO_REQUEST) {
- if (pktin.type == SSH2_MSG_USERAUTH_FAILURE)
- gotit = TRUE;
- logevent("Keyboard-interactive authentication refused");
- type = AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET;
+ if (s->gss_stat != SSH_GSS_OK) {
+ s->gsslib->release_name(s->gsslib, &s->gss_srv_name);
+ s->gsslib->release_cred(s->gsslib, &s->gss_ctx);
continue;
}
+ logevent("GSSAPI authentication loop finished OK");
- kbd_inter_running = TRUE;
- curr_prompt = 0;
- }
+ /* Now send the MIC */
- if (kbd_inter_running) {
- method = AUTH_KEYBOARD_INTERACTIVE;
- type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
- tried_keyb_inter = TRUE;
+ s->pktout = ssh2_pkt_init(0);
+ micoffset = s->pktout->length;
+ ssh_pkt_addstring_start(s->pktout);
+ ssh_pkt_addstring_data(s->pktout, (char *)ssh->v2_session_id, ssh->v2_session_id_len);
+ ssh_pkt_addbyte(s->pktout, SSH2_MSG_USERAUTH_REQUEST);
+ ssh_pkt_addstring(s->pktout, ssh->username);
+ ssh_pkt_addstring(s->pktout, "ssh-connection");
+ ssh_pkt_addstring(s->pktout, "gssapi-with-mic");
- ssh_pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh_pkt_ctx |= SSH2_PKTCTX_KBDINTER;
+ s->gss_buf.value = (char *)s->pktout->data + micoffset;
+ s->gss_buf.length = s->pktout->length - micoffset;
- if (curr_prompt == 0) {
- /*
- * We've got a fresh USERAUTH_INFO_REQUEST.
- * Display header data, and start going through
- * the prompts.
- */
- char *name, *inst, *lang;
- int name_len, inst_len, lang_len;
+ s->gsslib->get_mic(s->gsslib, s->gss_ctx, &s->gss_buf, &mic);
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_GSSAPI_MIC);
+ ssh_pkt_addstring_start(s->pktout);
+ ssh_pkt_addstring_data(s->pktout, mic.value, mic.length);
+ ssh2_pkt_send(ssh, s->pktout);
+ s->gsslib->free_mic(s->gsslib, &mic);
- ssh2_pkt_getstring(&name, &name_len);
- ssh2_pkt_getstring(&inst, &inst_len);
- ssh2_pkt_getstring(&lang, &lang_len);
- if (name_len > 0) {
- c_write_untrusted(name, name_len);
- c_write_str("\r\n");
- }
- if (inst_len > 0) {
- c_write_untrusted(inst, inst_len);
- c_write_str("\r\n");
- }
- num_prompts = ssh2_pkt_getuint32();
- }
+ s->gotit = FALSE;
+
+ s->gsslib->release_name(s->gsslib, &s->gss_srv_name);
+ s->gsslib->release_cred(s->gsslib, &s->gss_ctx);
+ continue;
+#endif
+ } else if (s->can_keyb_inter && !s->kbd_inter_refused) {
/*
- * If there are prompts remaining in the packet,
- * display one and get a response.
+ * Keyboard-interactive authentication.
*/
- if (curr_prompt < num_prompts) {
- char *prompt;
- int prompt_len;
-
- ssh2_pkt_getstring(&prompt, &prompt_len);
- if (prompt_len > 0) {
- strncpy(pwprompt, prompt, sizeof(pwprompt));
- pwprompt[prompt_len < sizeof(pwprompt) ?
- prompt_len : sizeof(pwprompt)-1] = '\0';
- } else {
- strcpy(pwprompt,
- "<server failed to send prompt>: ");
- }
- echo = ssh2_pkt_getbool();
- need_pw = TRUE;
- } else
- need_pw = FALSE;
- }
-
- if (!method && can_passwd) {
- method = AUTH_PASSWORD;
- ssh_pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh_pkt_ctx |= SSH2_PKTCTX_PASSWORD;
- sprintf(pwprompt, "%.90s@%.90s's password: ", username,
- savedhost);
- need_pw = TRUE;
- }
- if (need_pw) {
- if (ssh_get_line) {
- if (!ssh_get_line(pwprompt, password,
- sizeof(password), TRUE)) {
- /*
- * get_line failed to get a password (for
- * example because one was supplied on the
- * command line which has already failed to
- * work). Terminate.
- */
- ssh2_pkt_init(SSH2_MSG_DISCONNECT);
- ssh2_pkt_adduint32(SSH2_DISCONNECT_BY_APPLICATION);
- ssh2_pkt_addstring
- ("No more passwords available to try");
- ssh2_pkt_addstring("en"); /* language tag */
- ssh2_pkt_send();
- logevent("Unable to authenticate");
- connection_fatal("Unable to authenticate");
- ssh_state = SSH_STATE_CLOSED;
- crReturnV;
- }
- } else {
- static int ret;
- c_write_untrusted(pwprompt, strlen(pwprompt));
- ssh_send_ok = 1;
-
- setup_userpass_input(password, sizeof(password), echo);
- do {
- crWaitUntilV(!ispkt);
- ret = process_userpass_input(in, inlen);
- } while (ret == 0);
- if (ret < 0)
- cleanup_exit(0);
- c_write_str("\r\n");
+ s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
+
+ ssh->pkt_actx = SSH2_PKTCTX_KBDINTER;
+
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "keyboard-interactive");
+ /* method */
+ ssh2_pkt_addstring(s->pktout, ""); /* lang */
+ ssh2_pkt_addstring(s->pktout, ""); /* submethods */
+ ssh2_pkt_send(ssh, s->pktout);
+
+ logevent("Attempting keyboard-interactive authentication");
+
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_INFO_REQUEST) {
+ /* Server is not willing to do keyboard-interactive
+ * at all (or, bizarrely but legally, accepts the
+ * user without actually issuing any prompts).
+ * Give up on it entirely. */
+ s->gotit = TRUE;
+ s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET;
+ s->kbd_inter_refused = TRUE; /* don't try it again */
+ continue;
}
- }
- if (method == AUTH_PUBLICKEY_FILE) {
/*
- * We have our passphrase. Now try the actual authentication.
+ * Loop while the server continues to send INFO_REQUESTs.
*/
- struct ssh2_userkey *key;
+ while (pktin->type == SSH2_MSG_USERAUTH_INFO_REQUEST) {
+
+ char *name, *inst, *lang;
+ int name_len, inst_len, lang_len;
+ int i;
+
+ /*
+ * We've got a fresh USERAUTH_INFO_REQUEST.
+ * Get the preamble and start building a prompt.
+ */
+ ssh_pkt_getstring(pktin, &name, &name_len);
+ ssh_pkt_getstring(pktin, &inst, &inst_len);
+ ssh_pkt_getstring(pktin, &lang, &lang_len);
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = TRUE;
+
+ /*
+ * Get any prompt(s) from the packet.
+ */
+ s->num_prompts = ssh_pkt_getuint32(pktin);
+ for (i = 0; i < s->num_prompts; i++) {
+ char *prompt;
+ int prompt_len;
+ int echo;
+ static char noprompt[] =
+ "<server failed to send prompt>: ";
+
+ ssh_pkt_getstring(pktin, &prompt, &prompt_len);
+ echo = ssh2_pkt_getbool(pktin);
+ if (!prompt_len) {
+ prompt = noprompt;
+ prompt_len = lenof(noprompt)-1;
+ }
+ add_prompt(s->cur_prompt,
+ dupprintf("%.*s", prompt_len, prompt),
+ echo);
+ }
- key = ssh2_load_userkey(cfg.keyfile, password);
- if (key == SSH2_WRONG_PASSPHRASE || key == NULL) {
- if (key == SSH2_WRONG_PASSPHRASE) {
- c_write_str("Wrong passphrase\r\n");
- tried_pubkey_config = FALSE;
+ if (name_len) {
+ /* FIXME: better prefix to distinguish from
+ * local prompts? */
+ s->cur_prompt->name =
+ dupprintf("SSH server: %.*s", name_len, name);
+ s->cur_prompt->name_reqd = TRUE;
} else {
- c_write_str("Unable to load private key\r\n");
- tried_pubkey_config = TRUE;
+ s->cur_prompt->name =
+ dupstr("SSH server authentication");
+ s->cur_prompt->name_reqd = FALSE;
+ }
+ /* We add a prefix to try to make it clear that a prompt
+ * has come from the server.
+ * FIXME: ugly to print "Using..." in prompt _every_
+ * time round. Can this be done more subtly? */
+ /* Special case: for reasons best known to themselves,
+ * some servers send k-i requests with no prompts and
+ * nothing to display. Keep quiet in this case. */
+ if (s->num_prompts || name_len || inst_len) {
+ s->cur_prompt->instruction =
+ dupprintf("Using keyboard-interactive authentication.%s%.*s",
+ inst_len ? "\n" : "", inst_len, inst);
+ s->cur_prompt->instr_reqd = TRUE;
+ } else {
+ s->cur_prompt->instr_reqd = FALSE;
}
- /* Send a spurious AUTH_NONE to return to the top. */
- ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(username);
- ssh2_pkt_addstring("ssh-connection"); /* service requested */
- ssh2_pkt_addstring("none"); /* method */
- ssh2_pkt_send();
- type = AUTH_TYPE_NONE;
- } else {
- unsigned char *pkblob, *sigblob, *sigdata;
- int pkblob_len, sigblob_len, sigdata_len;
/*
- * We have loaded the private key and the server
- * has announced that it's willing to accept it.
- * Hallelujah. Generate a signature and send it.
+ * Display any instructions, and get the user's
+ * response(s).
+ */
+ {
+ int ret; /* not live over crReturn */
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntilV(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
+ }
+ if (!ret) {
+ /*
+ * Failed to get responses. Terminate.
+ */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, NULL, "Unable to authenticate",
+ SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER,
+ TRUE);
+ crStopV;
+ }
+ }
+
+ /*
+ * Send the response(s) to the server.
*/
- ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(username);
- ssh2_pkt_addstring("ssh-connection"); /* service requested */
- ssh2_pkt_addstring("publickey"); /* method */
- ssh2_pkt_addbool(TRUE);
- ssh2_pkt_addstring(key->alg->name);
- pkblob = key->alg->public_blob(key->data, &pkblob_len);
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data(pkblob, pkblob_len);
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_INFO_RESPONSE);
+ ssh2_pkt_adduint32(s->pktout, s->num_prompts);
+ for (i=0; i < s->num_prompts; i++) {
+ dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
+ ssh2_pkt_addstring(s->pktout,
+ s->cur_prompt->prompts[i]->result);
+ end_log_omission(ssh, s->pktout);
+ }
+ ssh2_pkt_send_with_padding(ssh, s->pktout, 256);
+
+ /*
+ * Free the prompts structure from this iteration.
+ * If there's another, a new one will be allocated
+ * when we return to the top of this while loop.
+ */
+ free_prompts(s->cur_prompt);
/*
- * The data to be signed is:
- *
- * string session-id
- *
- * followed by everything so far placed in the
- * outgoing packet.
+ * Get the next packet in case it's another
+ * INFO_REQUEST.
*/
- sigdata_len = pktout.length - 5 + 4 + 20;
- sigdata = smalloc(sigdata_len);
- PUT_32BIT(sigdata, 20);
- memcpy(sigdata + 4, ssh2_session_id, 20);
- memcpy(sigdata + 24, pktout.data + 5,
- pktout.length - 5);
- sigblob = key->alg->sign(key->data, sigdata,
- sigdata_len, &sigblob_len);
- ssh2_add_sigblob(pkblob, pkblob_len,
- sigblob, sigblob_len);
- sfree(pkblob);
- sfree(sigblob);
- sfree(sigdata);
+ crWaitUntilV(pktin);
+
+ }
+
+ /*
+ * We should have SUCCESS or FAILURE now.
+ */
+ s->gotit = TRUE;
+
+ } else if (s->can_passwd) {
- ssh2_pkt_send();
- type = AUTH_TYPE_PUBLICKEY;
+ /*
+ * Plain old password authentication.
+ */
+ int ret; /* not live over crReturn */
+ int changereq_first_time; /* not live over crReturn */
+
+ ssh->pkt_actx = SSH2_PKTCTX_PASSWORD;
+
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH password");
+ add_prompt(s->cur_prompt, dupprintf("%s@%s's password: ",
+ ssh->username,
+ ssh->savedhost),
+ FALSE);
+
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntilV(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
}
- } else if (method == AUTH_PASSWORD) {
+ if (!ret) {
+ /*
+ * Failed to get responses. Terminate.
+ */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, NULL, "Unable to authenticate",
+ SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER,
+ TRUE);
+ crStopV;
+ }
+ /*
+ * Squirrel away the password. (We may need it later if
+ * asked to change it.)
+ */
+ s->password = dupstr(s->cur_prompt->prompts[0]->result);
+ free_prompts(s->cur_prompt);
+
/*
- * We send the password packet lumped tightly together with
- * an SSH_MSG_IGNORE packet. The IGNORE packet contains a
- * string long enough to make the total length of the two
- * packets constant. This should ensure that a passive
- * listener doing traffic analyis can't work out the length
- * of the password.
+ * Send the password packet.
*
- * For this to work, we need an assumption about the
- * maximum length of the password packet. I think 256 is
- * pretty conservative. Anyone using a password longer than
- * that probably doesn't have much to worry about from
+ * We pad out the password packet to 256 bytes to make
+ * it harder for an attacker to find the length of the
+ * user's password.
+ *
+ * Anyone using a password longer than 256 bytes
+ * probably doesn't have much to worry about from
* people who find out how long their password is!
*/
- ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(username);
- ssh2_pkt_addstring("ssh-connection"); /* service requested */
- ssh2_pkt_addstring("password");
- ssh2_pkt_addbool(FALSE);
- ssh2_pkt_addstring(password);
- ssh2_pkt_defer();
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "password");
+ ssh2_pkt_addbool(s->pktout, FALSE);
+ dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
+ ssh2_pkt_addstring(s->pktout, s->password);
+ end_log_omission(ssh, s->pktout);
+ ssh2_pkt_send_with_padding(ssh, s->pktout, 256);
+ logevent("Sent password");
+ s->type = AUTH_TYPE_PASSWORD;
+
/*
- * We'll include a string that's an exact multiple of the
- * cipher block size. If the cipher is NULL for some
- * reason, we don't do this trick at all because we gain
- * nothing by it.
+ * Wait for next packet, in case it's a password change
+ * request.
*/
- if (cscipher) {
- int stringlen, i;
+ crWaitUntilV(pktin);
+ changereq_first_time = TRUE;
+
+ while (pktin->type == SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ) {
+
+ /*
+ * We're being asked for a new password
+ * (perhaps not for the first time).
+ * Loop until the server accepts it.
+ */
+
+ int got_new = FALSE; /* not live over crReturn */
+ char *prompt; /* not live over crReturn */
+ int prompt_len; /* not live over crReturn */
+
+ {
+ char *msg;
+ if (changereq_first_time)
+ msg = "Server requested password change";
+ else
+ msg = "Server rejected new password";
+ logevent(msg);
+ c_write_str(ssh, msg);
+ c_write_str(ssh, "\r\n");
+ }
+
+ ssh_pkt_getstring(pktin, &prompt, &prompt_len);
+
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("New SSH password");
+ s->cur_prompt->instruction =
+ dupprintf("%.*s", prompt_len, prompt);
+ s->cur_prompt->instr_reqd = TRUE;
+ /*
+ * There's no explicit requirement in the protocol
+ * for the "old" passwords in the original and
+ * password-change messages to be the same, and
+ * apparently some Cisco kit supports password change
+ * by the user entering a blank password originally
+ * and the real password subsequently, so,
+ * reluctantly, we prompt for the old password again.
+ *
+ * (On the other hand, some servers don't even bother
+ * to check this field.)
+ */
+ add_prompt(s->cur_prompt,
+ dupstr("Current password (blank for previously entered password): "),
+ FALSE);
+ add_prompt(s->cur_prompt, dupstr("Enter new password: "),
+ FALSE);
+ add_prompt(s->cur_prompt, dupstr("Confirm new password: "),
+ FALSE);
+
+ /*
+ * Loop until the user manages to enter the same
+ * password twice.
+ */
+ while (!got_new) {
+
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntilV(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
+ }
+ if (!ret) {
+ /*
+ * Failed to get responses. Terminate.
+ */
+ /* burn the evidence */
+ free_prompts(s->cur_prompt);
+ smemclr(s->password, strlen(s->password));
+ sfree(s->password);
+ ssh_disconnect(ssh, NULL, "Unable to authenticate",
+ SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER,
+ TRUE);
+ crStopV;
+ }
- stringlen = (256 - deferred_len);
- stringlen += cscipher->blksize - 1;
- stringlen -= (stringlen % cscipher->blksize);
- if (cscomp) {
/*
- * Temporarily disable actual compression,
- * so we can guarantee to get this string
- * exactly the length we want it. The
- * compression-disabling routine should
- * return an integer indicating how many
- * bytes we should adjust our string length
- * by.
+ * If the user specified a new original password
+ * (IYSWIM), overwrite any previously specified
+ * one.
+ * (A side effect is that the user doesn't have to
+ * re-enter it if they louse up the new password.)
*/
- stringlen -= cscomp->disable_compression();
- }
- ssh2_pkt_init(SSH2_MSG_IGNORE);
- ssh2_pkt_addstring_start();
- for (i = 0; i < stringlen; i++) {
- char c = (char) random_byte();
- ssh2_pkt_addstring_data(&c, 1);
+ if (s->cur_prompt->prompts[0]->result[0]) {
+ smemclr(s->password, strlen(s->password));
+ /* burn the evidence */
+ sfree(s->password);
+ s->password =
+ dupstr(s->cur_prompt->prompts[0]->result);
+ }
+
+ /*
+ * Check the two new passwords match.
+ */
+ got_new = (strcmp(s->cur_prompt->prompts[1]->result,
+ s->cur_prompt->prompts[2]->result)
+ == 0);
+ if (!got_new)
+ /* They don't. Silly user. */
+ c_write_str(ssh, "Passwords do not match\r\n");
+
}
- ssh2_pkt_defer();
- }
- ssh_pkt_defersend();
- logevent("Sent password");
- type = AUTH_TYPE_PASSWORD;
- } else if (method == AUTH_KEYBOARD_INTERACTIVE) {
- if (curr_prompt == 0) {
- ssh2_pkt_init(SSH2_MSG_USERAUTH_INFO_RESPONSE);
- ssh2_pkt_adduint32(num_prompts);
- }
- if (need_pw) { /* only add pw if we just got one! */
- ssh2_pkt_addstring(password);
- memset(password, 0, sizeof(password));
- curr_prompt++;
- }
- if (curr_prompt >= num_prompts) {
- ssh2_pkt_send();
- } else {
+
+ /*
+ * Send the new password (along with the old one).
+ * (see above for padding rationale)
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "password");
+ ssh2_pkt_addbool(s->pktout, TRUE);
+ dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
+ ssh2_pkt_addstring(s->pktout, s->password);
+ ssh2_pkt_addstring(s->pktout,
+ s->cur_prompt->prompts[1]->result);
+ free_prompts(s->cur_prompt);
+ end_log_omission(ssh, s->pktout);
+ ssh2_pkt_send_with_padding(ssh, s->pktout, 256);
+ logevent("Sent new password");
+
/*
- * If there are prompts remaining, we set
- * `gotit' so that we won't attempt to get
- * another packet. Then we go back round the
- * loop and will end up retrieving another
- * prompt out of the existing packet. Funky or
- * what?
+ * Now see what the server has to say about it.
+ * (If it's CHANGEREQ again, it's not happy with the
+ * new password.)
*/
- gotit = TRUE;
+ crWaitUntilV(pktin);
+ changereq_first_time = FALSE;
+
}
- type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
- } else {
- c_write_str
- ("No supported authentication methods left to try!\r\n");
- logevent
- ("No supported authentications offered. Disconnecting");
- ssh2_pkt_init(SSH2_MSG_DISCONNECT);
- ssh2_pkt_adduint32(SSH2_DISCONNECT_BY_APPLICATION);
- ssh2_pkt_addstring
- ("No supported authentication methods available");
- ssh2_pkt_addstring("en"); /* language tag */
- ssh2_pkt_send();
- ssh_state = SSH_STATE_CLOSED;
- crReturnV;
- }
- }
- } while (!we_are_in);
- /*
- * Now we're authenticated for the connection protocol. The
- * connection protocol will automatically have started at this
- * point; there's no need to send SERVICE_REQUEST.
- */
+ /*
+ * We need to reexamine the current pktin at the top
+ * of the loop. Either:
+ * - we weren't asked to change password at all, in
+ * which case it's a SUCCESS or FAILURE with the
+ * usual meaning
+ * - we sent a new password, and the server was
+ * either OK with it (SUCCESS or FAILURE w/partial
+ * success) or unhappy with the _old_ password
+ * (FAILURE w/o partial success)
+ * In any of these cases, we go back to the top of
+ * the loop and start again.
+ */
+ s->gotit = TRUE;
- /*
- * So now create a channel with a session in it.
- */
- ssh_channels = newtree234(ssh_channelcmp);
- mainchan = smalloc(sizeof(struct ssh_channel));
- mainchan->localid = alloc_channel_id();
- ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
- ssh2_pkt_addstring("session");
- ssh2_pkt_adduint32(mainchan->localid);
- mainchan->v.v2.locwindow = OUR_V2_WINSIZE;
- ssh2_pkt_adduint32(mainchan->v.v2.locwindow); /* our window size */
- ssh2_pkt_adduint32(0x4000UL); /* our max pkt size */
- ssh2_pkt_send();
- crWaitUntilV(ispkt);
- if (pktin.type != SSH2_MSG_CHANNEL_OPEN_CONFIRMATION) {
- bombout(("Server refused to open a session"));
- crReturnV;
- /* FIXME: error data comes back in FAILURE packet */
- }
- if (ssh2_pkt_getuint32() != mainchan->localid) {
- bombout(("Server's channel confirmation cited wrong channel"));
- crReturnV;
- }
- mainchan->remoteid = ssh2_pkt_getuint32();
- mainchan->type = CHAN_MAINSESSION;
- mainchan->closes = 0;
- mainchan->v.v2.remwindow = ssh2_pkt_getuint32();
- mainchan->v.v2.remmaxpkt = ssh2_pkt_getuint32();
- bufchain_init(&mainchan->v.v2.outbuffer);
- add234(ssh_channels, mainchan);
- logevent("Opened channel for session");
+ /*
+ * We don't need the old password any more, in any
+ * case. Burn the evidence.
+ */
+ smemclr(s->password, strlen(s->password));
+ sfree(s->password);
- /*
- * Potentially enable X11 forwarding.
- */
- if (cfg.x11_forward) {
- char proto[20], data[64];
- logevent("Requesting X11 forwarding");
- x11_invent_auth(proto, sizeof(proto), data, sizeof(data));
- ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(mainchan->remoteid);
- ssh2_pkt_addstring("x11-req");
- ssh2_pkt_addbool(1); /* want reply */
- ssh2_pkt_addbool(0); /* many connections */
- ssh2_pkt_addstring(proto);
- ssh2_pkt_addstring(data);
- ssh2_pkt_adduint32(0); /* screen number */
- ssh2_pkt_send();
+ } else {
+ char *str = dupprintf("No supported authentication methods available"
+ " (server sent: %.*s)",
+ methlen, methods);
- do {
- crWaitUntilV(ispkt);
- if (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST) {
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c)
- continue; /* nonexistent channel */
- c->v.v2.remwindow += ssh2_pkt_getuint32();
- }
- } while (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST);
+ ssh_disconnect(ssh, str,
+ "No supported authentication methods available",
+ SSH2_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE,
+ FALSE);
+ sfree(str);
- if (pktin.type != SSH2_MSG_CHANNEL_SUCCESS) {
- if (pktin.type != SSH2_MSG_CHANNEL_FAILURE) {
- bombout(("Unexpected response to X11 forwarding request:"
- " packet type %d", pktin.type));
- crReturnV;
- }
- logevent("X11 forwarding refused");
- } else {
- logevent("X11 forwarding enabled");
- ssh_X11_fwd_enabled = TRUE;
- }
- }
+ crStopV;
- /*
- * Enable port forwardings.
- */
- {
- static char *e; /* preserve across crReturn */
- char type;
- int n;
- int sport,dport,sserv,dserv;
- char sports[256], dports[256], host[256];
- char buf[1024];
- struct servent *se;
-
- ssh_rportfwds = newtree234(ssh_rportcmp_ssh2);
- /* Add port forwardings. */
- e = cfg.portfwd;
- while (*e) {
- type = *e++;
- n = 0;
- while (*e && *e != '\t')
- sports[n++] = *e++;
- sports[n] = 0;
- if (*e == '\t')
- e++;
- n = 0;
- while (*e && *e != ':')
- host[n++] = *e++;
- host[n] = 0;
- if (*e == ':')
- e++;
- n = 0;
- while (*e)
- dports[n++] = *e++;
- dports[n] = 0;
- e++;
- dport = atoi(dports);
- dserv = 0;
- if (dport == 0) {
- dserv = 1;
- se = getservbyname(dports, NULL);
- if (se != NULL) {
- dport = ntohs(se->s_port);
- } else {
- sprintf(buf,
- "Service lookup failed for destination port \"%s\"",
- dports);
- logevent(buf);
- }
- }
- sport = atoi(sports);
- sserv = 0;
- if (sport == 0) {
- sserv = 1;
- se = getservbyname(sports, NULL);
- if (se != NULL) {
- sport = ntohs(se->s_port);
- } else {
- sprintf(buf,
- "Service lookup failed for source port \"%s\"",
- sports);
- logevent(buf);
- }
}
- if (sport && dport) {
- if (type == 'L') {
- pfd_addforward(host, dport, sport);
- sprintf(buf, "Local port %.*s%.*s%d%.*s forwarding to"
- " %s:%.*s%.*s%d%.*s",
- sserv ? strlen(sports) : 0, sports,
- sserv, "(", sport, sserv, ")",
- host,
- dserv ? strlen(dports) : 0, dports,
- dserv, "(", dport, dserv, ")");
- logevent(buf);
- } else {
- struct ssh_rportfwd *pf;
- pf = smalloc(sizeof(*pf));
- strcpy(pf->dhost, host);
- pf->dport = dport;
- pf->sport = sport;
- if (add234(ssh_rportfwds, pf) != pf) {
- sprintf(buf,
- "Duplicate remote port forwarding to %s:%d",
- host, dport);
- logevent(buf);
- sfree(pf);
- } else {
- sprintf(buf, "Requesting remote port %.*s%.*s%d%.*s"
- " forward to %s:%.*s%.*s%d%.*s",
- sserv ? strlen(sports) : 0, sports,
- sserv, "(", sport, sserv, ")",
- host,
- dserv ? strlen(dports) : 0, dports,
- dserv, "(", dport, dserv, ")");
- logevent(buf);
- ssh2_pkt_init(SSH2_MSG_GLOBAL_REQUEST);
- ssh2_pkt_addstring("tcpip-forward");
- ssh2_pkt_addbool(1);/* want reply */
- if (cfg.rport_acceptall)
- ssh2_pkt_addstring("0.0.0.0");
- else
- ssh2_pkt_addstring("127.0.0.1");
- ssh2_pkt_adduint32(sport);
- ssh2_pkt_send();
- do {
- crWaitUntilV(ispkt);
- if (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST) {
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c)
- continue;/* nonexistent channel */
- c->v.v2.remwindow += ssh2_pkt_getuint32();
- }
- } while (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST);
-
- if (pktin.type != SSH2_MSG_REQUEST_SUCCESS) {
- if (pktin.type != SSH2_MSG_REQUEST_FAILURE) {
- bombout(("Unexpected response to port "
- "forwarding request: packet type %d",
- pktin.type));
- crReturnV;
- }
- logevent("Server refused this port forwarding");
- } else {
- logevent("Remote port forwarding enabled");
- }
- }
- }
- }
}
}
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] = NULL;
- /*
- * Potentially enable agent forwarding.
- */
- if (cfg.agentfwd && agent_exists()) {
- logevent("Requesting OpenSSH-style agent forwarding");
- ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(mainchan->remoteid);
- ssh2_pkt_addstring("auth-agent-req@openssh.com");
- ssh2_pkt_addbool(1); /* want reply */
- ssh2_pkt_send();
-
- do {
- crWaitUntilV(ispkt);
- if (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST) {
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c)
- continue; /* nonexistent channel */
- c->v.v2.remwindow += ssh2_pkt_getuint32();
- }
- } while (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST);
+ /* Clear up various bits and pieces from authentication. */
+ if (s->publickey_blob) {
+ sfree(s->publickey_blob);
+ sfree(s->publickey_comment);
+ }
+ if (s->agent_response)
+ sfree(s->agent_response);
- if (pktin.type != SSH2_MSG_CHANNEL_SUCCESS) {
- if (pktin.type != SSH2_MSG_CHANNEL_FAILURE) {
- bombout(("Unexpected response to agent forwarding request:"
- " packet type %d", pktin.type));
- crReturnV;
- }
- logevent("Agent forwarding refused");
- } else {
- logevent("Agent forwarding enabled");
- ssh_agentfwd_enabled = TRUE;
- }
+ if (s->userauth_success) {
+ /*
+ * We've just received USERAUTH_SUCCESS, and we haven't sent any
+ * packets since. Signal the transport layer to consider enacting
+ * delayed compression.
+ *
+ * (Relying on we_are_in is not sufficient, as
+ * draft-miller-secsh-compression-delayed is quite clear that it
+ * triggers on USERAUTH_SUCCESS specifically, and we_are_in can
+ * become set for other reasons.)
+ */
+ do_ssh2_transport(ssh, "enabling delayed compression", -2, NULL);
}
/*
- * Now allocate a pty for the session.
+ * Now the connection protocol has started, one way or another.
*/
- if (!cfg.nopty) {
- ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(mainchan->remoteid); /* recipient channel */
- ssh2_pkt_addstring("pty-req");
- ssh2_pkt_addbool(1); /* want reply */
- ssh2_pkt_addstring(cfg.termtype);
- ssh2_pkt_adduint32(cols);
- ssh2_pkt_adduint32(rows);
- ssh2_pkt_adduint32(0); /* pixel width */
- ssh2_pkt_adduint32(0); /* pixel height */
- ssh2_pkt_addstring_start();
- ssh2_pkt_addstring_data("\0", 1); /* TTY_OP_END, no special options */
- ssh2_pkt_send();
- ssh_state = SSH_STATE_INTERMED;
-
- do {
- crWaitUntilV(ispkt);
- if (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST) {
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c)
- continue; /* nonexistent channel */
- c->v.v2.remwindow += ssh2_pkt_getuint32();
- }
- } while (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST);
- if (pktin.type != SSH2_MSG_CHANNEL_SUCCESS) {
- if (pktin.type != SSH2_MSG_CHANNEL_FAILURE) {
- bombout(("Unexpected response to pty request:"
- " packet type %d", pktin.type));
- crReturnV;
- }
- c_write_str("Server refused to allocate pty\r\n");
- ssh_editing = ssh_echoing = 1;
- } else {
- logevent("Allocated pty");
- }
- } else {
- ssh_editing = ssh_echoing = 1;
- }
+ ssh->channels = newtree234(ssh_channelcmp);
/*
- * Start a shell or a remote command. We may have to attempt
- * this twice if the config data has provided a second choice
- * of command.
+ * Set up handlers for some connection protocol messages, so we
+ * don't have to handle them repeatedly in this coroutine.
*/
- while (1) {
- int subsys;
- char *cmd;
-
- if (ssh_fallback_cmd) {
- subsys = cfg.ssh_subsys2;
- cmd = cfg.remote_cmd_ptr2;
- } else {
- subsys = cfg.ssh_subsys;
- cmd = cfg.remote_cmd_ptr;
- }
-
- ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(mainchan->remoteid); /* recipient channel */
- if (subsys) {
- ssh2_pkt_addstring("subsystem");
- ssh2_pkt_addbool(1); /* want reply */
- ssh2_pkt_addstring(cmd);
- } else if (*cmd) {
- ssh2_pkt_addstring("exec");
- ssh2_pkt_addbool(1); /* want reply */
- ssh2_pkt_addstring(cmd);
- } else {
- ssh2_pkt_addstring("shell");
- ssh2_pkt_addbool(1); /* want reply */
- }
- ssh2_pkt_send();
- do {
- crWaitUntilV(ispkt);
- if (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST) {
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c)
- continue; /* nonexistent channel */
- c->v.v2.remwindow += ssh2_pkt_getuint32();
- }
- } while (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST);
- if (pktin.type != SSH2_MSG_CHANNEL_SUCCESS) {
- if (pktin.type != SSH2_MSG_CHANNEL_FAILURE) {
- bombout(("Unexpected response to shell/command request:"
- " packet type %d", pktin.type));
- crReturnV;
- }
- /*
- * We failed to start the command. If this is the
- * fallback command, we really are finished; if it's
- * not, and if the fallback command exists, try falling
- * back to it before complaining.
- */
- if (!ssh_fallback_cmd && cfg.remote_cmd_ptr2 != NULL) {
- logevent("Primary command failed; attempting fallback");
- ssh_fallback_cmd = TRUE;
- continue;
- }
- bombout(("Server refused to start a shell/command"));
- crReturnV;
- } else {
- logevent("Started a shell/command");
- }
- break;
- }
-
- ssh_state = SSH_STATE_SESSION;
- if (size_needed)
- ssh_size();
- if (eof_needed)
- ssh_special(TS_EOF);
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_WINDOW_ADJUST] =
+ ssh2_msg_channel_window_adjust;
+ ssh->packet_dispatch[SSH2_MSG_GLOBAL_REQUEST] =
+ ssh2_msg_global_request;
/*
- * Transfer data!
+ * Create the main session channel.
*/
- ldisc_send(NULL, 0, 0); /* cause ldisc to notice changes */
- ssh_send_ok = 1;
- while (1) {
- static int try_send;
- crReturnV;
- try_send = FALSE;
- if (ispkt) {
- if (pktin.type == SSH2_MSG_CHANNEL_DATA ||
- pktin.type == SSH2_MSG_CHANNEL_EXTENDED_DATA) {
- char *data;
- int length;
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c)
- continue; /* nonexistent channel */
- if (pktin.type == SSH2_MSG_CHANNEL_EXTENDED_DATA &&
- ssh2_pkt_getuint32() != SSH2_EXTENDED_DATA_STDERR)
- continue; /* extended but not stderr */
- ssh2_pkt_getstring(&data, &length);
- if (data) {
- int bufsize;
- c->v.v2.locwindow -= length;
- switch (c->type) {
- case CHAN_MAINSESSION:
- bufsize =
- from_backend(pktin.type ==
- SSH2_MSG_CHANNEL_EXTENDED_DATA,
- data, length);
- break;
- case CHAN_X11:
- bufsize = x11_send(c->u.x11.s, data, length);
- break;
- case CHAN_SOCKDATA:
- bufsize = pfd_send(c->u.pfd.s, data, length);
- break;
- case CHAN_AGENT:
- while (length > 0) {
- if (c->u.a.lensofar < 4) {
- int l = min(4 - c->u.a.lensofar, length);
- memcpy(c->u.a.msglen + c->u.a.lensofar,
- data, l);
- data += l;
- length -= l;
- c->u.a.lensofar += l;
- }
- if (c->u.a.lensofar == 4) {
- c->u.a.totallen =
- 4 + GET_32BIT(c->u.a.msglen);
- c->u.a.message = smalloc(c->u.a.totallen);
- memcpy(c->u.a.message, c->u.a.msglen, 4);
- }
- if (c->u.a.lensofar >= 4 && length > 0) {
- int l =
- min(c->u.a.totallen - c->u.a.lensofar,
- length);
- memcpy(c->u.a.message + c->u.a.lensofar,
- data, l);
- data += l;
- length -= l;
- c->u.a.lensofar += l;
- }
- if (c->u.a.lensofar == c->u.a.totallen) {
- void *reply, *sentreply;
- int replylen;
- agent_query(c->u.a.message,
- c->u.a.totallen, &reply,
- &replylen);
- if (reply)
- sentreply = reply;
- else {
- /* Fake SSH_AGENT_FAILURE. */
- sentreply = "\0\0\0\1\5";
- replylen = 5;
- }
- ssh2_add_channel_data(c, sentreply,
- replylen);
- try_send = TRUE;
- if (reply)
- sfree(reply);
- sfree(c->u.a.message);
- c->u.a.lensofar = 0;
- }
- }
- bufsize = 0;
- break;
- }
- /*
- * If we are not buffering too much data,
- * enlarge the window again at the remote side.
- */
- if (bufsize < OUR_V2_WINSIZE)
- ssh2_set_window(c, OUR_V2_WINSIZE - bufsize);
- }
- } else if (pktin.type == SSH2_MSG_DISCONNECT) {
- ssh_state = SSH_STATE_CLOSED;
- logevent("Received disconnect message");
- crReturnV;
- } else if (pktin.type == SSH2_MSG_CHANNEL_EOF) {
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
-
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c)
- continue; /* nonexistent channel */
-
- if (c->type == CHAN_X11) {
- /*
- * Remote EOF on an X11 channel means we should
- * wrap up and close the channel ourselves.
- */
- x11_close(c->u.x11.s);
- sshfwd_close(c);
- } else if (c->type == CHAN_AGENT) {
- sshfwd_close(c);
- } else if (c->type == CHAN_SOCKDATA) {
- pfd_close(c->u.pfd.s);
- sshfwd_close(c);
- }
- } else if (pktin.type == SSH2_MSG_CHANNEL_CLOSE) {
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
-
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c || ((int)c->remoteid) == -1) {
- bombout(("Received CHANNEL_CLOSE for %s channel %d\n",
- c ? "half-open" : "nonexistent", i));
- }
- /* Do pre-close processing on the channel. */
- switch (c->type) {
- case CHAN_MAINSESSION:
- break; /* nothing to see here, move along */
- case CHAN_X11:
- if (c->u.x11.s != NULL)
- x11_close(c->u.x11.s);
- sshfwd_close(c);
- break;
- case CHAN_AGENT:
- sshfwd_close(c);
- break;
- case CHAN_SOCKDATA:
- if (c->u.pfd.s != NULL)
- pfd_close(c->u.pfd.s);
- sshfwd_close(c);
- break;
- }
- if (c->closes == 0) {
- ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
- ssh2_pkt_adduint32(c->remoteid);
- ssh2_pkt_send();
- }
- del234(ssh_channels, c);
- bufchain_clear(&c->v.v2.outbuffer);
- sfree(c);
+ if (conf_get_int(ssh->conf, CONF_ssh_no_shell)) {
+ ssh->mainchan = NULL;
+ } else {
+ ssh->mainchan = snew(struct ssh_channel);
+ ssh->mainchan->ssh = ssh;
+ ssh2_channel_init(ssh->mainchan);
- /*
- * See if that was the last channel left open.
- */
- if (count234(ssh_channels) == 0) {
-#if 0
- /*
- * We used to send SSH_MSG_DISCONNECT here,
- * because I'd believed that _every_ conforming
- * SSH2 connection had to end with a disconnect
- * being sent by at least one side; apparently
- * I was wrong and it's perfectly OK to
- * unceremoniously slam the connection shut
- * when you're done, and indeed OpenSSH feels
- * this is more polite than sending a
- * DISCONNECT. So now we don't.
- */
- logevent("All channels closed. Disconnecting");
- ssh2_pkt_init(SSH2_MSG_DISCONNECT);
- ssh2_pkt_adduint32(SSH2_DISCONNECT_BY_APPLICATION);
- ssh2_pkt_addstring("All open channels closed");
- ssh2_pkt_addstring("en"); /* language tag */
- ssh2_pkt_send();
-#endif
- ssh_state = SSH_STATE_CLOSED;
- crReturnV;
- }
- continue; /* remote sends close; ignore (FIXME) */
- } else if (pktin.type == SSH2_MSG_CHANNEL_WINDOW_ADJUST) {
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c)
- continue; /* nonexistent channel */
- c->v.v2.remwindow += ssh2_pkt_getuint32();
- try_send = TRUE;
- } else if (pktin.type == SSH2_MSG_CHANNEL_OPEN_CONFIRMATION) {
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c)
- continue; /* nonexistent channel */
- if (c->type != CHAN_SOCKDATA_DORMANT)
- continue; /* dunno why they're confirming this */
- c->remoteid = ssh2_pkt_getuint32();
- c->type = CHAN_SOCKDATA;
- c->v.v2.remwindow = ssh2_pkt_getuint32();
- c->v.v2.remmaxpkt = ssh2_pkt_getuint32();
- if (c->u.pfd.s)
- pfd_confirm(c->u.pfd.s);
- if (c->closes) {
- /*
- * We have a pending close on this channel,
- * which we decided on before the server acked
- * the channel open. So now we know the
- * remoteid, we can close it again.
- */
- ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
- ssh2_pkt_adduint32(c->remoteid);
- ssh2_pkt_send();
- }
- } else if (pktin.type == SSH2_MSG_CHANNEL_OPEN_FAILURE) {
- unsigned i = ssh2_pkt_getuint32();
- struct ssh_channel *c;
- c = find234(ssh_channels, &i, ssh_channelfind);
- if (!c)
- continue; /* nonexistent channel */
- if (c->type != CHAN_SOCKDATA_DORMANT)
- continue; /* dunno why they're failing this */
+ if (*conf_get_str(ssh->conf, CONF_ssh_nc_host)) {
+ /*
+ * Just start a direct-tcpip channel and use it as the main
+ * channel.
+ */
+ ssh_send_port_open(ssh->mainchan,
+ conf_get_str(ssh->conf, CONF_ssh_nc_host),
+ conf_get_int(ssh->conf, CONF_ssh_nc_port),
+ "main channel");
+ ssh->ncmode = TRUE;
+ } else {
+ s->pktout = ssh2_chanopen_init(ssh->mainchan, "session");
+ logevent("Opening session as main channel");
+ ssh2_pkt_send(ssh, s->pktout);
+ ssh->ncmode = FALSE;
+ }
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_CHANNEL_OPEN_CONFIRMATION) {
+ bombout(("Server refused to open channel"));
+ crStopV;
+ /* FIXME: error data comes back in FAILURE packet */
+ }
+ if (ssh_pkt_getuint32(pktin) != ssh->mainchan->localid) {
+ bombout(("Server's channel confirmation cited wrong channel"));
+ crStopV;
+ }
+ ssh->mainchan->remoteid = ssh_pkt_getuint32(pktin);
+ ssh->mainchan->halfopen = FALSE;
+ ssh->mainchan->type = CHAN_MAINSESSION;
+ ssh->mainchan->v.v2.remwindow = ssh_pkt_getuint32(pktin);
+ ssh->mainchan->v.v2.remmaxpkt = ssh_pkt_getuint32(pktin);
+ add234(ssh->channels, ssh->mainchan);
+ update_specials_menu(ssh->frontend);
+ logevent("Opened main channel");
+ }
- logevent("Forwarded connection refused by server");
+ /*
+ * Now we have a channel, make dispatch table entries for
+ * general channel-based messages.
+ */
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_DATA] =
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EXTENDED_DATA] =
+ ssh2_msg_channel_data;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EOF] = ssh2_msg_channel_eof;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_CLOSE] = ssh2_msg_channel_close;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_CONFIRMATION] =
+ ssh2_msg_channel_open_confirmation;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_FAILURE] =
+ ssh2_msg_channel_open_failure;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_REQUEST] =
+ ssh2_msg_channel_request;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] =
+ ssh2_msg_channel_open;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_SUCCESS] = ssh2_msg_channel_response;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_FAILURE] = ssh2_msg_channel_response;
+
+
+ if (ssh->mainchan && conf_get_int(ssh->conf, CONF_ssh_simple)) {
+ /*
+ * This message indicates to the server that we promise
+ * not to try to run any other channel in parallel with
+ * this one, so it's safe for it to advertise a very large
+ * window and leave the flow control to TCP.
+ */
+ s->pktout = ssh2_chanreq_init(ssh->mainchan,
+ "simple@putty.projects.tartarus.org",
+ NULL, NULL);
+ ssh2_pkt_send(ssh, s->pktout);
+ }
- pfd_close(c->u.pfd.s);
+ /*
+ * Enable port forwardings.
+ */
+ ssh_setup_portfwd(ssh, ssh->conf);
- del234(ssh_channels, c);
- sfree(c);
- } else if (pktin.type == SSH2_MSG_CHANNEL_REQUEST) {
- unsigned localid;
- char *type;
- int typelen, want_reply;
- struct ssh_channel *c;
+ if (ssh->mainchan && !ssh->ncmode) {
+ /*
+ * Send the CHANNEL_REQUESTS for the main session channel.
+ * Each one is handled by its own little asynchronous
+ * co-routine.
+ */
- localid = ssh2_pkt_getuint32();
- ssh2_pkt_getstring(&type, &typelen);
- want_reply = ssh2_pkt_getbool();
+ /* Potentially enable X11 forwarding. */
+ if (conf_get_int(ssh->conf, CONF_x11_forward) &&
+ (ssh->x11disp =
+ x11_setup_display(conf_get_str(ssh->conf, CONF_x11_display),
+ conf_get_int(ssh->conf, CONF_x11_auth),
+ ssh->conf)))
+ ssh2_setup_x11(ssh->mainchan, NULL, NULL);
- /*
- * First, check that the channel exists. Otherwise,
- * we can instantly disconnect with a rude message.
- */
- c = find234(ssh_channels, &localid, ssh_channelfind);
- if (!c) {
- char buf[80];
- sprintf(buf, "Received channel request for nonexistent"
- " channel %d", localid);
- logevent(buf);
- ssh2_pkt_init(SSH2_MSG_DISCONNECT);
- ssh2_pkt_adduint32(SSH2_DISCONNECT_BY_APPLICATION);
- ssh2_pkt_addstring(buf);
- ssh2_pkt_addstring("en"); /* language tag */
- ssh2_pkt_send();
- connection_fatal("%s", buf);
- ssh_state = SSH_STATE_CLOSED;
- crReturnV;
- }
+ /* Potentially enable agent forwarding. */
+ if (conf_get_int(ssh->conf, CONF_agentfwd) && agent_exists())
+ ssh2_setup_agent(ssh->mainchan, NULL, NULL);
- /*
- * Having got the channel number, we now look at
- * the request type string to see if it's something
- * we recognise.
- */
- if (typelen == 11 && !memcmp(type, "exit-status", 11) &&
- c == mainchan) {
- /* We recognise "exit-status" on the primary channel. */
- char buf[100];
- ssh_exitcode = ssh2_pkt_getuint32();
- sprintf(buf, "Server sent command exit status %d",
- ssh_exitcode);
- logevent(buf);
- if (want_reply) {
- ssh2_pkt_init(SSH2_MSG_CHANNEL_SUCCESS);
- ssh2_pkt_adduint32(c->remoteid);
- ssh2_pkt_send();
- }
- } else {
- /*
- * This is a channel request we don't know
- * about, so we now either ignore the request
- * or respond with CHANNEL_FAILURE, depending
- * on want_reply.
- */
- if (want_reply) {
- ssh2_pkt_init(SSH2_MSG_CHANNEL_FAILURE);
- ssh2_pkt_adduint32(c->remoteid);
- ssh2_pkt_send();
- }
- }
- } else if (pktin.type == SSH2_MSG_GLOBAL_REQUEST) {
- char *type;
- int typelen, want_reply;
+ /* Now allocate a pty for the session. */
+ if (!conf_get_int(ssh->conf, CONF_nopty))
+ ssh2_setup_pty(ssh->mainchan, NULL, NULL);
- ssh2_pkt_getstring(&type, &typelen);
- want_reply = ssh2_pkt_getbool();
+ /* Send environment variables. */
+ ssh2_setup_env(ssh->mainchan, NULL, NULL);
- /*
- * We currently don't support any global requests
- * at all, so we either ignore the request or
- * respond with REQUEST_FAILURE, depending on
- * want_reply.
- */
- if (want_reply) {
- ssh2_pkt_init(SSH2_MSG_REQUEST_FAILURE);
- ssh2_pkt_send();
- }
- } else if (pktin.type == SSH2_MSG_CHANNEL_OPEN) {
- char *type;
- int typelen;
- char *error = NULL;
- struct ssh_channel *c;
- unsigned remid, winsize, pktsize;
- ssh2_pkt_getstring(&type, &typelen);
- c = smalloc(sizeof(struct ssh_channel));
-
- remid = ssh2_pkt_getuint32();
- winsize = ssh2_pkt_getuint32();
- pktsize = ssh2_pkt_getuint32();
-
- if (typelen == 3 && !memcmp(type, "x11", 3)) {
- if (!ssh_X11_fwd_enabled)
- error = "X11 forwarding is not enabled";
- else if (x11_init(&c->u.x11.s, cfg.x11_display, c) !=
- NULL) {
- error = "Unable to open an X11 connection";
- } else {
- c->type = CHAN_X11;
- }
- } else if (typelen == 15 &&
- !memcmp(type, "forwarded-tcpip", 15)) {
- struct ssh_rportfwd pf, *realpf;
- char *dummy;
- int dummylen;
- ssh2_pkt_getstring(&dummy, &dummylen);/* skip address */
- pf.sport = ssh2_pkt_getuint32();
- realpf = find234(ssh_rportfwds, &pf, NULL);
- if (realpf == NULL) {
- error = "Remote port is not recognised";
- } else {
- char *e = pfd_newconnect(&c->u.pfd.s, realpf->dhost,
- realpf->dport, c);
- char buf[1024];
- sprintf(buf, "Received remote port open request for %s:%d",
- realpf->dhost, realpf->dport);
- logevent(buf);
- if (e != NULL) {
- sprintf(buf, "Port open failed: %s", e);
- logevent(buf);
- error = "Port open failed";
- } else {
- logevent("Forwarded port opened successfully");
- c->type = CHAN_SOCKDATA;
- }
- }
- } else if (typelen == 22 &&
- !memcmp(type, "auth-agent@openssh.com", 3)) {
- if (!ssh_agentfwd_enabled)
- error = "Agent forwarding is not enabled";
- else {
- c->type = CHAN_AGENT; /* identify channel type */
- c->u.a.lensofar = 0;
- }
- } else {
- error = "Unsupported channel type requested";
- }
+ /*
+ * Start a shell or a remote command. We may have to attempt
+ * this twice if the config data has provided a second choice
+ * of command.
+ */
+ while (1) {
+ int subsys;
+ char *cmd;
- c->remoteid = remid;
- if (error) {
- ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN_FAILURE);
- ssh2_pkt_adduint32(c->remoteid);
- ssh2_pkt_adduint32(SSH2_OPEN_CONNECT_FAILED);
- ssh2_pkt_addstring(error);
- ssh2_pkt_addstring("en"); /* language tag */
- ssh2_pkt_send();
- sfree(c);
- } else {
- c->localid = alloc_channel_id();
- c->closes = 0;
- c->v.v2.locwindow = OUR_V2_WINSIZE;
- c->v.v2.remwindow = winsize;
- c->v.v2.remmaxpkt = pktsize;
- bufchain_init(&c->v.v2.outbuffer);
- add234(ssh_channels, c);
- ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION);
- ssh2_pkt_adduint32(c->remoteid);
- ssh2_pkt_adduint32(c->localid);
- ssh2_pkt_adduint32(c->v.v2.locwindow);
- ssh2_pkt_adduint32(0x4000UL); /* our max pkt size */
- ssh2_pkt_send();
+ if (ssh->fallback_cmd) {
+ subsys = conf_get_int(ssh->conf, CONF_ssh_subsys2);
+ cmd = conf_get_str(ssh->conf, CONF_remote_cmd2);
+ } else {
+ subsys = conf_get_int(ssh->conf, CONF_ssh_subsys);
+ cmd = conf_get_str(ssh->conf, CONF_remote_cmd);
+ }
+
+ if (subsys) {
+ s->pktout = ssh2_chanreq_init(ssh->mainchan, "subsystem",
+ ssh2_response_authconn, NULL);
+ ssh2_pkt_addstring(s->pktout, cmd);
+ } else if (*cmd) {
+ s->pktout = ssh2_chanreq_init(ssh->mainchan, "exec",
+ ssh2_response_authconn, NULL);
+ ssh2_pkt_addstring(s->pktout, cmd);
+ } else {
+ s->pktout = ssh2_chanreq_init(ssh->mainchan, "shell",
+ ssh2_response_authconn, NULL);
+ }
+ ssh2_pkt_send(ssh, s->pktout);
+
+ crWaitUntilV(pktin);
+
+ if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
+ if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
+ bombout(("Unexpected response to shell/command request:"
+ " packet type %d", pktin->type));
+ crStopV;
+ }
+ /*
+ * We failed to start the command. If this is the
+ * fallback command, we really are finished; if it's
+ * not, and if the fallback command exists, try falling
+ * back to it before complaining.
+ */
+ if (!ssh->fallback_cmd &&
+ *conf_get_str(ssh->conf, CONF_remote_cmd2)) {
+ logevent("Primary command failed; attempting fallback");
+ ssh->fallback_cmd = TRUE;
+ continue;
}
+ bombout(("Server refused to start a shell/command"));
+ crStopV;
} else {
- bombout(("Strange packet received: type %d", pktin.type));
- crReturnV;
+ logevent("Started a shell/command");
}
- } else {
+ break;
+ }
+ } else {
+ ssh->editing = ssh->echoing = TRUE;
+ }
+
+ ssh->state = SSH_STATE_SESSION;
+ if (ssh->size_needed)
+ ssh_size(ssh, ssh->term_width, ssh->term_height);
+ if (ssh->eof_needed)
+ ssh_special(ssh, TS_EOF);
+
+ /*
+ * Transfer data!
+ */
+ if (ssh->ldisc)
+ ldisc_send(ssh->ldisc, NULL, 0, 0);/* cause ldisc to notice changes */
+ if (ssh->mainchan)
+ ssh->send_ok = 1;
+ while (1) {
+ crReturnV;
+ s->try_send = FALSE;
+ if (pktin) {
+
+ /*
+ * _All_ the connection-layer packets we expect to
+ * receive are now handled by the dispatch table.
+ * Anything that reaches here must be bogus.
+ */
+
+ bombout(("Strange packet received: type %d", pktin->type));
+ crStopV;
+ } else if (ssh->mainchan) {
/*
* We have spare data. Add it to the channel buffer.
*/
- ssh2_add_channel_data(mainchan, in, inlen);
- try_send = TRUE;
+ ssh2_add_channel_data(ssh->mainchan, (char *)in, inlen);
+ s->try_send = TRUE;
}
- if (try_send) {
+ if (s->try_send) {
int i;
struct ssh_channel *c;
/*
* Try to send data on all channels if we can.
*/
- for (i = 0; NULL != (c = index234(ssh_channels, i)); i++) {
- int bufsize = ssh2_try_send(c);
- if (bufsize == 0) {
- switch (c->type) {
- case CHAN_MAINSESSION:
- /* stdin need not receive an unthrottle
- * notification since it will be polled */
- break;
- case CHAN_X11:
- x11_unthrottle(c->u.x11.s);
- break;
- case CHAN_AGENT:
- /* agent sockets are request/response and need no
- * buffer management */
- break;
- case CHAN_SOCKDATA:
- pfd_unthrottle(c->u.pfd.s);
- break;
- }
- }
- }
+ for (i = 0; NULL != (c = index234(ssh->channels, i)); i++)
+ ssh2_try_send_and_unthrottle(ssh, c);
}
}
}
/*
- * Handle the top-level SSH2 protocol.
+ * Handlers for SSH-2 messages that might arrive at any moment.
+ */
+static void ssh2_msg_disconnect(Ssh ssh, struct Packet *pktin)
+{
+ /* log reason code in disconnect message */
+ char *buf, *msg;
+ int reason, msglen;
+
+ reason = ssh_pkt_getuint32(pktin);
+ ssh_pkt_getstring(pktin, &msg, &msglen);
+
+ if (reason > 0 && reason < lenof(ssh2_disconnect_reasons)) {
+ buf = dupprintf("Received disconnect message (%s)",
+ ssh2_disconnect_reasons[reason]);
+ } else {
+ buf = dupprintf("Received disconnect message (unknown"
+ " type %d)", reason);
+ }
+ logevent(buf);
+ sfree(buf);
+ buf = dupprintf("Disconnection message text: %.*s",
+ msglen, msg);
+ logevent(buf);
+ bombout(("Server sent disconnect message\ntype %d (%s):\n\"%.*s\"",
+ reason,
+ (reason > 0 && reason < lenof(ssh2_disconnect_reasons)) ?
+ ssh2_disconnect_reasons[reason] : "unknown",
+ msglen, msg));
+ sfree(buf);
+}
+
+static void ssh2_msg_debug(Ssh ssh, struct Packet *pktin)
+{
+ /* log the debug message */
+ char *msg;
+ int msglen;
+
+ /* XXX maybe we should actually take notice of the return value */
+ ssh2_pkt_getbool(pktin);
+ ssh_pkt_getstring(pktin, &msg, &msglen);
+
+ logeventf(ssh, "Remote debug message: %.*s", msglen, msg);
+}
+
+static void ssh2_msg_transport(Ssh ssh, struct Packet *pktin)
+{
+ do_ssh2_transport(ssh, NULL, 0, pktin);
+}
+
+/*
+ * Called if we receive a packet that isn't allowed by the protocol.
+ * This only applies to packets whose meaning PuTTY understands.
+ * Entirely unknown packets are handled below.
*/
-static void ssh2_protocol(unsigned char *in, int inlen, int ispkt)
+static void ssh2_msg_unexpected(Ssh ssh, struct Packet *pktin)
+{
+ char *buf = dupprintf("Server protocol violation: unexpected %s packet",
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx,
+ pktin->type));
+ ssh_disconnect(ssh, NULL, buf, SSH2_DISCONNECT_PROTOCOL_ERROR, FALSE);
+ sfree(buf);
+}
+
+static void ssh2_msg_something_unimplemented(Ssh ssh, struct Packet *pktin)
+{
+ struct Packet *pktout;
+ pktout = ssh2_pkt_init(SSH2_MSG_UNIMPLEMENTED);
+ ssh2_pkt_adduint32(pktout, pktin->sequence);
+ /*
+ * UNIMPLEMENTED messages MUST appear in the same order as the
+ * messages they respond to. Hence, never queue them.
+ */
+ ssh2_pkt_send_noqueue(ssh, pktout);
+}
+
+/*
+ * Handle the top-level SSH-2 protocol.
+ */
+static void ssh2_protocol_setup(Ssh ssh)
+{
+ int i;
+
+ /*
+ * Most messages cause SSH2_MSG_UNIMPLEMENTED.
+ */
+ for (i = 0; i < 256; i++)
+ ssh->packet_dispatch[i] = ssh2_msg_something_unimplemented;
+
+ /*
+ * Initially, we only accept transport messages (and a few generic
+ * ones). do_ssh2_authconn will add more when it starts.
+ * Messages that are understood but not currently acceptable go to
+ * ssh2_msg_unexpected.
+ */
+ ssh->packet_dispatch[SSH2_MSG_UNIMPLEMENTED] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_SERVICE_REQUEST] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_SERVICE_ACCEPT] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_KEXINIT] = ssh2_msg_transport;
+ ssh->packet_dispatch[SSH2_MSG_NEWKEYS] = ssh2_msg_transport;
+ ssh->packet_dispatch[SSH2_MSG_KEXDH_INIT] = ssh2_msg_transport;
+ ssh->packet_dispatch[SSH2_MSG_KEXDH_REPLY] = ssh2_msg_transport;
+ /* ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_REQUEST] = ssh2_msg_transport; duplicate case value */
+ /* ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_GROUP] = ssh2_msg_transport; duplicate case value */
+ ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_INIT] = ssh2_msg_transport;
+ ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_REPLY] = ssh2_msg_transport;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_REQUEST] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_FAILURE] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_SUCCESS] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_PK_OK] = ssh2_msg_unexpected;
+ /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ] = ssh2_msg_unexpected; duplicate case value */
+ /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_REQUEST] = ssh2_msg_unexpected; duplicate case value */
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_RESPONSE] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_GLOBAL_REQUEST] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_REQUEST_SUCCESS] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_REQUEST_FAILURE] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_CONFIRMATION] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_FAILURE] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_WINDOW_ADJUST] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_DATA] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EXTENDED_DATA] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EOF] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_CLOSE] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_REQUEST] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_SUCCESS] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_FAILURE] = ssh2_msg_unexpected;
+
+ /*
+ * These messages have a special handler from the start.
+ */
+ ssh->packet_dispatch[SSH2_MSG_DISCONNECT] = ssh2_msg_disconnect;
+ ssh->packet_dispatch[SSH2_MSG_IGNORE] = ssh_msg_ignore; /* shared with SSH-1 */
+ ssh->packet_dispatch[SSH2_MSG_DEBUG] = ssh2_msg_debug;
+}
+
+static void ssh2_timer(void *ctx, unsigned long now)
+{
+ Ssh ssh = (Ssh)ctx;
+
+ if (ssh->state == SSH_STATE_CLOSED)
+ return;
+
+ if (!ssh->kex_in_progress && conf_get_int(ssh->conf, CONF_ssh_rekey_time) != 0 &&
+ now == ssh->next_rekey) {
+ do_ssh2_transport(ssh, "timeout", -1, NULL);
+ }
+}
+
+static void ssh2_protocol(Ssh ssh, void *vin, int inlen,
+ struct Packet *pktin)
{
- if (do_ssh2_transport(in, inlen, ispkt) == 0)
+ unsigned char *in = (unsigned char *)vin;
+ if (ssh->state == SSH_STATE_CLOSED)
return;
- do_ssh2_authconn(in, inlen, ispkt);
+
+ if (pktin) {
+ ssh->incoming_data_size += pktin->encrypted_len;
+ if (!ssh->kex_in_progress &&
+ ssh->max_data_size != 0 &&
+ ssh->incoming_data_size > ssh->max_data_size)
+ do_ssh2_transport(ssh, "too much data received", -1, NULL);
+ }
+
+ if (pktin)
+ ssh->packet_dispatch[pktin->type](ssh, pktin);
+ else if (!ssh->protocol_initial_phase_done)
+ do_ssh2_transport(ssh, in, inlen, pktin);
+ else
+ do_ssh2_authconn(ssh, in, inlen, pktin);
+}
+
+static void ssh_cache_conf_values(Ssh ssh)
+{
+ ssh->logomitdata = conf_get_int(ssh->conf, CONF_logomitdata);
}
/*
*
* Returns an error message, or NULL on success.
*/
-static char *ssh_init(char *host, int port, char **realhost, int nodelay)
+static const char *ssh_init(void *frontend_handle, void **backend_handle,
+ Conf *conf, char *host, int port, char **realhost,
+ int nodelay, int keepalive)
{
- char *p;
+ const char *p;
+ Ssh ssh;
+
+ ssh = snew(struct ssh_tag);
+ ssh->conf = conf_copy(conf);
+ ssh_cache_conf_values(ssh);
+ ssh->version = 0; /* when not ready yet */
+ ssh->s = NULL;
+ ssh->cipher = NULL;
+ ssh->v1_cipher_ctx = NULL;
+ ssh->crcda_ctx = NULL;
+ ssh->cscipher = NULL;
+ ssh->cs_cipher_ctx = NULL;
+ ssh->sccipher = NULL;
+ ssh->sc_cipher_ctx = NULL;
+ ssh->csmac = NULL;
+ ssh->cs_mac_ctx = NULL;
+ ssh->scmac = NULL;
+ ssh->sc_mac_ctx = NULL;
+ ssh->cscomp = NULL;
+ ssh->cs_comp_ctx = NULL;
+ ssh->sccomp = NULL;
+ ssh->sc_comp_ctx = NULL;
+ ssh->kex = NULL;
+ ssh->kex_ctx = NULL;
+ ssh->hostkey = NULL;
+ ssh->exitcode = -1;
+ ssh->close_expected = FALSE;
+ ssh->clean_exit = FALSE;
+ ssh->state = SSH_STATE_PREPACKET;
+ ssh->size_needed = FALSE;
+ ssh->eof_needed = FALSE;
+ ssh->ldisc = NULL;
+ ssh->logctx = NULL;
+ ssh->deferred_send_data = NULL;
+ ssh->deferred_len = 0;
+ ssh->deferred_size = 0;
+ ssh->fallback_cmd = 0;
+ ssh->pkt_kctx = SSH2_PKTCTX_NOKEX;
+ ssh->pkt_actx = SSH2_PKTCTX_NOAUTH;
+ ssh->x11disp = NULL;
+ ssh->v1_compressing = FALSE;
+ ssh->v2_outgoing_sequence = 0;
+ ssh->ssh1_rdpkt_crstate = 0;
+ ssh->ssh2_rdpkt_crstate = 0;
+ ssh->ssh_gotdata_crstate = 0;
+ ssh->do_ssh1_connection_crstate = 0;
+ ssh->do_ssh_init_state = NULL;
+ ssh->do_ssh1_login_state = NULL;
+ ssh->do_ssh2_transport_state = NULL;
+ ssh->do_ssh2_authconn_state = NULL;
+ ssh->v_c = NULL;
+ ssh->v_s = NULL;
+ ssh->mainchan = NULL;
+ ssh->throttled_all = 0;
+ ssh->v1_stdout_throttling = 0;
+ ssh->queue = NULL;
+ ssh->queuelen = ssh->queuesize = 0;
+ ssh->queueing = FALSE;
+ ssh->qhead = ssh->qtail = NULL;
+ ssh->deferred_rekey_reason = NULL;
+ bufchain_init(&ssh->queued_incoming_data);
+ ssh->frozen = FALSE;
+ ssh->username = NULL;
+ ssh->sent_console_eof = FALSE;
+ ssh->got_pty = FALSE;
+
+ *backend_handle = ssh;
#ifdef MSCRYPTOAPI
if (crypto_startup() == 0)
return "Microsoft high encryption pack not installed!";
#endif
- ssh_send_ok = 0;
- ssh_editing = 0;
- ssh_echoing = 0;
- ssh1_throttle_count = 0;
- ssh_overall_bufsize = 0;
- ssh_fallback_cmd = 0;
+ ssh->frontend = frontend_handle;
+ ssh->term_width = conf_get_int(ssh->conf, CONF_width);
+ ssh->term_height = conf_get_int(ssh->conf, CONF_height);
+
+ ssh->channels = NULL;
+ ssh->rportfwds = NULL;
+ ssh->portfwds = NULL;
+
+ ssh->send_ok = 0;
+ ssh->editing = 0;
+ ssh->echoing = 0;
+ ssh->conn_throttle_count = 0;
+ ssh->overall_bufsize = 0;
+ ssh->fallback_cmd = 0;
- p = connect_to_host(host, port, realhost, nodelay);
+ ssh->protocol = NULL;
+
+ ssh->protocol_initial_phase_done = FALSE;
+
+ ssh->pinger = NULL;
+
+ ssh->incoming_data_size = ssh->outgoing_data_size =
+ ssh->deferred_data_size = 0L;
+ ssh->max_data_size = parse_blocksize(conf_get_str(ssh->conf,
+ CONF_ssh_rekey_data));
+ ssh->kex_in_progress = FALSE;
+
+#ifndef NO_GSSAPI
+ ssh->gsslibs = NULL;
+#endif
+
+ p = connect_to_host(ssh, host, port, realhost, nodelay, keepalive);
if (p != NULL)
return p;
+ random_ref();
+
return NULL;
}
+static void ssh_free(void *handle)
+{
+ Ssh ssh = (Ssh) handle;
+ struct ssh_channel *c;
+ struct ssh_rportfwd *pf;
+
+ if (ssh->v1_cipher_ctx)
+ ssh->cipher->free_context(ssh->v1_cipher_ctx);
+ if (ssh->cs_cipher_ctx)
+ ssh->cscipher->free_context(ssh->cs_cipher_ctx);
+ if (ssh->sc_cipher_ctx)
+ ssh->sccipher->free_context(ssh->sc_cipher_ctx);
+ if (ssh->cs_mac_ctx)
+ ssh->csmac->free_context(ssh->cs_mac_ctx);
+ if (ssh->sc_mac_ctx)
+ ssh->scmac->free_context(ssh->sc_mac_ctx);
+ if (ssh->cs_comp_ctx) {
+ if (ssh->cscomp)
+ ssh->cscomp->compress_cleanup(ssh->cs_comp_ctx);
+ else
+ zlib_compress_cleanup(ssh->cs_comp_ctx);
+ }
+ if (ssh->sc_comp_ctx) {
+ if (ssh->sccomp)
+ ssh->sccomp->decompress_cleanup(ssh->sc_comp_ctx);
+ else
+ zlib_decompress_cleanup(ssh->sc_comp_ctx);
+ }
+ if (ssh->kex_ctx)
+ dh_cleanup(ssh->kex_ctx);
+ sfree(ssh->savedhost);
+
+ while (ssh->queuelen-- > 0)
+ ssh_free_packet(ssh->queue[ssh->queuelen]);
+ sfree(ssh->queue);
+
+ while (ssh->qhead) {
+ struct queued_handler *qh = ssh->qhead;
+ ssh->qhead = qh->next;
+ sfree(qh);
+ }
+ ssh->qhead = ssh->qtail = NULL;
+
+ if (ssh->channels) {
+ while ((c = delpos234(ssh->channels, 0)) != NULL) {
+ switch (c->type) {
+ case CHAN_X11:
+ if (c->u.x11.s != NULL)
+ x11_close(c->u.x11.s);
+ break;
+ case CHAN_SOCKDATA:
+ case CHAN_SOCKDATA_DORMANT:
+ if (c->u.pfd.s != NULL)
+ pfd_close(c->u.pfd.s);
+ break;
+ }
+ if (ssh->version == 2) {
+ struct outstanding_channel_request *ocr, *nocr;
+ ocr = c->v.v2.chanreq_head;
+ while (ocr) {
+ ocr->handler(c, NULL, ocr->ctx);
+ nocr = ocr->next;
+ sfree(ocr);
+ ocr = nocr;
+ }
+ bufchain_clear(&c->v.v2.outbuffer);
+ }
+ sfree(c);
+ }
+ freetree234(ssh->channels);
+ ssh->channels = NULL;
+ }
+
+ if (ssh->rportfwds) {
+ while ((pf = delpos234(ssh->rportfwds, 0)) != NULL)
+ free_rportfwd(pf);
+ freetree234(ssh->rportfwds);
+ ssh->rportfwds = NULL;
+ }
+ sfree(ssh->deferred_send_data);
+ if (ssh->x11disp)
+ x11_free_display(ssh->x11disp);
+ sfree(ssh->do_ssh_init_state);
+ sfree(ssh->do_ssh1_login_state);
+ sfree(ssh->do_ssh2_transport_state);
+ sfree(ssh->do_ssh2_authconn_state);
+ sfree(ssh->v_c);
+ sfree(ssh->v_s);
+ sfree(ssh->fullhostname);
+ if (ssh->crcda_ctx) {
+ crcda_free_context(ssh->crcda_ctx);
+ ssh->crcda_ctx = NULL;
+ }
+ if (ssh->s)
+ ssh_do_close(ssh, TRUE);
+ expire_timer_context(ssh);
+ if (ssh->pinger)
+ pinger_free(ssh->pinger);
+ bufchain_clear(&ssh->queued_incoming_data);
+ sfree(ssh->username);
+ conf_free(ssh->conf);
+#ifndef NO_GSSAPI
+ if (ssh->gsslibs)
+ ssh_gss_cleanup(ssh->gsslibs);
+#endif
+ sfree(ssh);
+
+ random_unref();
+}
+
+/*
+ * Reconfigure the SSH backend.
+ */
+static void ssh_reconfig(void *handle, Conf *conf)
+{
+ Ssh ssh = (Ssh) handle;
+ char *rekeying = NULL, rekey_mandatory = FALSE;
+ unsigned long old_max_data_size;
+ int i, rekey_time;
+
+ pinger_reconfig(ssh->pinger, ssh->conf, conf);
+ if (ssh->portfwds)
+ ssh_setup_portfwd(ssh, conf);
+
+ rekey_time = conf_get_int(conf, CONF_ssh_rekey_time);
+ if (conf_get_int(ssh->conf, CONF_ssh_rekey_time) != rekey_time &&
+ rekey_time != 0) {
+ unsigned long new_next = ssh->last_rekey + rekey_time*60*TICKSPERSEC;
+ unsigned long now = GETTICKCOUNT();
+
+ if (now - ssh->last_rekey > rekey_time*60*TICKSPERSEC) {
+ rekeying = "timeout shortened";
+ } else {
+ ssh->next_rekey = schedule_timer(new_next - now, ssh2_timer, ssh);
+ }
+ }
+
+ old_max_data_size = ssh->max_data_size;
+ ssh->max_data_size = parse_blocksize(conf_get_str(ssh->conf,
+ CONF_ssh_rekey_data));
+ if (old_max_data_size != ssh->max_data_size &&
+ ssh->max_data_size != 0) {
+ if (ssh->outgoing_data_size > ssh->max_data_size ||
+ ssh->incoming_data_size > ssh->max_data_size)
+ rekeying = "data limit lowered";
+ }
+
+ if (conf_get_int(ssh->conf, CONF_compression) !=
+ conf_get_int(conf, CONF_compression)) {
+ rekeying = "compression setting changed";
+ rekey_mandatory = TRUE;
+ }
+
+ for (i = 0; i < CIPHER_MAX; i++)
+ if (conf_get_int_int(ssh->conf, CONF_ssh_cipherlist, i) !=
+ conf_get_int_int(conf, CONF_ssh_cipherlist, i)) {
+ rekeying = "cipher settings changed";
+ rekey_mandatory = TRUE;
+ }
+ if (conf_get_int(ssh->conf, CONF_ssh2_des_cbc) !=
+ conf_get_int(conf, CONF_ssh2_des_cbc)) {
+ rekeying = "cipher settings changed";
+ rekey_mandatory = TRUE;
+ }
+
+ conf_free(ssh->conf);
+ ssh->conf = conf_copy(conf);
+ ssh_cache_conf_values(ssh);
+
+ if (rekeying) {
+ if (!ssh->kex_in_progress) {
+ do_ssh2_transport(ssh, rekeying, -1, NULL);
+ } else if (rekey_mandatory) {
+ ssh->deferred_rekey_reason = rekeying;
+ }
+ }
+}
+
/*
- * Called to send data down the Telnet connection.
+ * Called to send data down the SSH connection.
*/
-static int ssh_send(char *buf, int len)
+static int ssh_send(void *handle, char *buf, int len)
{
- if (s == NULL || ssh_protocol == NULL)
+ Ssh ssh = (Ssh) handle;
+
+ if (ssh == NULL || ssh->s == NULL || ssh->protocol == NULL)
return 0;
- ssh_protocol(buf, len, 0);
+ ssh->protocol(ssh, (unsigned char *)buf, len, 0);
- return ssh_sendbuffer();
+ return ssh_sendbuffer(ssh);
}
/*
* Called to query the current amount of buffered stdin data.
*/
-static int ssh_sendbuffer(void)
+static int ssh_sendbuffer(void *handle)
{
+ Ssh ssh = (Ssh) handle;
int override_value;
- if (s == NULL || ssh_protocol == NULL)
+ if (ssh == NULL || ssh->s == NULL || ssh->protocol == NULL)
return 0;
/*
* size on that to any individual buffer on the stdin channel.
*/
override_value = 0;
- if (ssh_throttled_all)
- override_value = ssh_overall_bufsize;
+ if (ssh->throttled_all)
+ override_value = ssh->overall_bufsize;
- if (ssh_version == 1) {
+ if (ssh->version == 1) {
return override_value;
- } else if (ssh_version == 2) {
- if (!mainchan || mainchan->closes > 0)
+ } else if (ssh->version == 2) {
+ if (!ssh->mainchan)
return override_value;
else
- return override_value + bufchain_size(&mainchan->v.v2.outbuffer);
+ return (override_value +
+ bufchain_size(&ssh->mainchan->v.v2.outbuffer));
}
return 0;
/*
* Called to set the size of the window from SSH's POV.
*/
-static void ssh_size(void)
+static void ssh_size(void *handle, int width, int height)
{
- switch (ssh_state) {
+ Ssh ssh = (Ssh) handle;
+ struct Packet *pktout;
+
+ ssh->term_width = width;
+ ssh->term_height = height;
+
+ switch (ssh->state) {
case SSH_STATE_BEFORE_SIZE:
case SSH_STATE_PREPACKET:
case SSH_STATE_CLOSED:
break; /* do nothing */
case SSH_STATE_INTERMED:
- size_needed = TRUE; /* buffer for later */
+ ssh->size_needed = TRUE; /* buffer for later */
break;
case SSH_STATE_SESSION:
- if (!cfg.nopty) {
- if (ssh_version == 1) {
- send_packet(SSH1_CMSG_WINDOW_SIZE,
- PKT_INT, rows, PKT_INT, cols,
+ if (!conf_get_int(ssh->conf, CONF_nopty)) {
+ if (ssh->version == 1) {
+ send_packet(ssh, SSH1_CMSG_WINDOW_SIZE,
+ PKT_INT, ssh->term_height,
+ PKT_INT, ssh->term_width,
PKT_INT, 0, PKT_INT, 0, PKT_END);
- } else {
- ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(mainchan->remoteid);
- ssh2_pkt_addstring("window-change");
- ssh2_pkt_addbool(0);
- ssh2_pkt_adduint32(cols);
- ssh2_pkt_adduint32(rows);
- ssh2_pkt_adduint32(0);
- ssh2_pkt_adduint32(0);
- ssh2_pkt_send();
+ } else if (ssh->mainchan) {
+ pktout = ssh2_chanreq_init(ssh->mainchan, "window-change",
+ NULL, NULL);
+ ssh2_pkt_adduint32(pktout, ssh->term_width);
+ ssh2_pkt_adduint32(pktout, ssh->term_height);
+ ssh2_pkt_adduint32(pktout, 0);
+ ssh2_pkt_adduint32(pktout, 0);
+ ssh2_pkt_send(ssh, pktout);
}
}
break;
}
/*
- * Send Telnet special codes. TS_EOF is useful for `plink', so you
+ * Return a list of the special codes that make sense in this
+ * protocol.
+ */
+static const struct telnet_special *ssh_get_specials(void *handle)
+{
+ static const struct telnet_special ssh1_ignore_special[] = {
+ {"IGNORE message", TS_NOP}
+ };
+ static const struct telnet_special ssh2_ignore_special[] = {
+ {"IGNORE message", TS_NOP},
+ };
+ static const struct telnet_special ssh2_rekey_special[] = {
+ {"Repeat key exchange", TS_REKEY},
+ };
+ static const struct telnet_special ssh2_session_specials[] = {
+ {NULL, TS_SEP},
+ {"Break", TS_BRK},
+ /* These are the signal names defined by RFC 4254.
+ * They include all the ISO C signals, but are a subset of the POSIX
+ * required signals. */
+ {"SIGINT (Interrupt)", TS_SIGINT},
+ {"SIGTERM (Terminate)", TS_SIGTERM},
+ {"SIGKILL (Kill)", TS_SIGKILL},
+ {"SIGQUIT (Quit)", TS_SIGQUIT},
+ {"SIGHUP (Hangup)", TS_SIGHUP},
+ {"More signals", TS_SUBMENU},
+ {"SIGABRT", TS_SIGABRT}, {"SIGALRM", TS_SIGALRM},
+ {"SIGFPE", TS_SIGFPE}, {"SIGILL", TS_SIGILL},
+ {"SIGPIPE", TS_SIGPIPE}, {"SIGSEGV", TS_SIGSEGV},
+ {"SIGUSR1", TS_SIGUSR1}, {"SIGUSR2", TS_SIGUSR2},
+ {NULL, TS_EXITMENU}
+ };
+ static const struct telnet_special specials_end[] = {
+ {NULL, TS_EXITMENU}
+ };
+ /* XXX review this length for any changes: */
+ static struct telnet_special ssh_specials[lenof(ssh2_ignore_special) +
+ lenof(ssh2_rekey_special) +
+ lenof(ssh2_session_specials) +
+ lenof(specials_end)];
+ Ssh ssh = (Ssh) handle;
+ int i = 0;
+#define ADD_SPECIALS(name) \
+ do { \
+ assert((i + lenof(name)) <= lenof(ssh_specials)); \
+ memcpy(&ssh_specials[i], name, sizeof name); \
+ i += lenof(name); \
+ } while(0)
+
+ if (ssh->version == 1) {
+ /* Don't bother offering IGNORE if we've decided the remote
+ * won't cope with it, since we wouldn't bother sending it if
+ * asked anyway. */
+ if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE))
+ ADD_SPECIALS(ssh1_ignore_special);
+ } else if (ssh->version == 2) {
+ if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH2_IGNORE))
+ ADD_SPECIALS(ssh2_ignore_special);
+ if (!(ssh->remote_bugs & BUG_SSH2_REKEY))
+ ADD_SPECIALS(ssh2_rekey_special);
+ if (ssh->mainchan)
+ ADD_SPECIALS(ssh2_session_specials);
+ } /* else we're not ready yet */
+
+ if (i) {
+ ADD_SPECIALS(specials_end);
+ return ssh_specials;
+ } else {
+ return NULL;
+ }
+#undef ADD_SPECIALS
+}
+
+/*
+ * Send special codes. TS_EOF is useful for `plink', so you
* can send an EOF and collect resulting output (e.g. `plink
* hostname sort').
*/
-static void ssh_special(Telnet_Special code)
+static void ssh_special(void *handle, Telnet_Special code)
{
+ Ssh ssh = (Ssh) handle;
+ struct Packet *pktout;
+
if (code == TS_EOF) {
- if (ssh_state != SSH_STATE_SESSION) {
+ if (ssh->state != SSH_STATE_SESSION) {
/*
* Buffer the EOF in case we are pre-SESSION, so we can
* send it as soon as we reach SESSION.
*/
if (code == TS_EOF)
- eof_needed = TRUE;
+ ssh->eof_needed = TRUE;
return;
}
- if (ssh_version == 1) {
- send_packet(SSH1_CMSG_EOF, PKT_END);
- } else {
- ssh2_pkt_init(SSH2_MSG_CHANNEL_EOF);
- ssh2_pkt_adduint32(mainchan->remoteid);
- ssh2_pkt_send();
+ if (ssh->version == 1) {
+ send_packet(ssh, SSH1_CMSG_EOF, PKT_END);
+ } else if (ssh->mainchan) {
+ sshfwd_write_eof(ssh->mainchan);
+ ssh->send_ok = 0; /* now stop trying to read from stdin */
}
logevent("Sent EOF message");
- } else if (code == TS_PING) {
- if (ssh_state == SSH_STATE_CLOSED
- || ssh_state == SSH_STATE_PREPACKET) return;
- if (ssh_version == 1) {
- if (!(ssh_remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE))
- send_packet(SSH1_MSG_IGNORE, PKT_STR, "", PKT_END);
+ } else if (code == TS_PING || code == TS_NOP) {
+ if (ssh->state == SSH_STATE_CLOSED
+ || ssh->state == SSH_STATE_PREPACKET) return;
+ if (ssh->version == 1) {
+ if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE))
+ send_packet(ssh, SSH1_MSG_IGNORE, PKT_STR, "", PKT_END);
} else {
- ssh2_pkt_init(SSH2_MSG_IGNORE);
- ssh2_pkt_addstring_start();
- ssh2_pkt_send();
+ if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH2_IGNORE)) {
+ pktout = ssh2_pkt_init(SSH2_MSG_IGNORE);
+ ssh2_pkt_addstring_start(pktout);
+ ssh2_pkt_send_noqueue(ssh, pktout);
+ }
+ }
+ } else if (code == TS_REKEY) {
+ if (!ssh->kex_in_progress && ssh->version == 2) {
+ do_ssh2_transport(ssh, "at user request", -1, NULL);
+ }
+ } else if (code == TS_BRK) {
+ if (ssh->state == SSH_STATE_CLOSED
+ || ssh->state == SSH_STATE_PREPACKET) return;
+ if (ssh->version == 1) {
+ logevent("Unable to send BREAK signal in SSH-1");
+ } else if (ssh->mainchan) {
+ pktout = ssh2_chanreq_init(ssh->mainchan, "break", NULL, NULL);
+ ssh2_pkt_adduint32(pktout, 0); /* default break length */
+ ssh2_pkt_send(ssh, pktout);
}
} else {
- /* do nothing */
+ /* Is is a POSIX signal? */
+ char *signame = NULL;
+ if (code == TS_SIGABRT) signame = "ABRT";
+ if (code == TS_SIGALRM) signame = "ALRM";
+ if (code == TS_SIGFPE) signame = "FPE";
+ if (code == TS_SIGHUP) signame = "HUP";
+ if (code == TS_SIGILL) signame = "ILL";
+ if (code == TS_SIGINT) signame = "INT";
+ if (code == TS_SIGKILL) signame = "KILL";
+ if (code == TS_SIGPIPE) signame = "PIPE";
+ if (code == TS_SIGQUIT) signame = "QUIT";
+ if (code == TS_SIGSEGV) signame = "SEGV";
+ if (code == TS_SIGTERM) signame = "TERM";
+ if (code == TS_SIGUSR1) signame = "USR1";
+ if (code == TS_SIGUSR2) signame = "USR2";
+ /* The SSH-2 protocol does in principle support arbitrary named
+ * signals, including signame@domain, but we don't support those. */
+ if (signame) {
+ /* It's a signal. */
+ if (ssh->version == 2 && ssh->mainchan) {
+ pktout = ssh2_chanreq_init(ssh->mainchan, "signal", NULL, NULL);
+ ssh2_pkt_addstring(pktout, signame);
+ ssh2_pkt_send(ssh, pktout);
+ logeventf(ssh, "Sent signal SIG%s", signame);
+ }
+ } else {
+ /* Never heard of it. Do nothing */
+ }
}
}
-void *new_sock_channel(Socket s)
+void *new_sock_channel(void *handle, Socket s)
{
+ Ssh ssh = (Ssh) handle;
struct ssh_channel *c;
- c = smalloc(sizeof(struct ssh_channel));
-
- if (c) {
- c->remoteid = -1; /* to be set when open confirmed */
- c->localid = alloc_channel_id();
- c->closes = 0;
- c->type = CHAN_SOCKDATA_DORMANT;/* identify channel type */
- c->u.pfd.s = s;
- bufchain_init(&c->v.v2.outbuffer);
- add234(ssh_channels, c);
- }
+ c = snew(struct ssh_channel);
+
+ c->ssh = ssh;
+ ssh2_channel_init(c);
+ c->halfopen = TRUE;
+ c->type = CHAN_SOCKDATA_DORMANT;/* identify channel type */
+ c->u.pfd.s = s;
+ add234(ssh->channels, c);
return c;
}
* This is called when stdout/stderr (the entity to which
* from_backend sends data) manages to clear some backlog.
*/
-void ssh_unthrottle(int bufsize)
+static void ssh_unthrottle(void *handle, int bufsize)
{
- if (ssh_version == 1) {
- if (ssh1_stdout_throttling && bufsize < SSH1_BUFFER_LIMIT) {
- ssh1_stdout_throttling = 0;
- ssh1_throttle(-1);
+ Ssh ssh = (Ssh) handle;
+ int buflimit;
+
+ if (ssh->version == 1) {
+ if (ssh->v1_stdout_throttling && bufsize < SSH1_BUFFER_LIMIT) {
+ ssh->v1_stdout_throttling = 0;
+ ssh_throttle_conn(ssh, -1);
}
} else {
- if (mainchan && mainchan->closes == 0)
- ssh2_set_window(mainchan, OUR_V2_WINSIZE - bufsize);
+ if (ssh->mainchan) {
+ ssh2_set_window(ssh->mainchan,
+ bufsize < ssh->mainchan->v.v2.locmaxwin ?
+ ssh->mainchan->v.v2.locmaxwin - bufsize : 0);
+ if (conf_get_int(ssh->conf, CONF_ssh_simple))
+ buflimit = 0;
+ else
+ buflimit = ssh->mainchan->v.v2.locmaxwin;
+ if (ssh->mainchan->throttling_conn && bufsize <= buflimit) {
+ ssh->mainchan->throttling_conn = 0;
+ ssh_throttle_conn(ssh, -1);
+ }
+ }
}
+
+ /*
+ * Now process any SSH connection data that was stashed in our
+ * queue while we were frozen.
+ */
+ ssh_process_queued_incoming_data(ssh);
}
void ssh_send_port_open(void *channel, char *hostname, int port, char *org)
{
struct ssh_channel *c = (struct ssh_channel *)channel;
- char buf[1024];
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
- sprintf(buf, "Opening forwarded connection to %.512s:%d", hostname, port);
- logevent(buf);
+ logeventf(ssh, "Opening connection to %s:%d for %s", hostname, port, org);
- if (ssh_version == 1) {
- send_packet(SSH1_MSG_PORT_OPEN,
+ if (ssh->version == 1) {
+ send_packet(ssh, SSH1_MSG_PORT_OPEN,
PKT_INT, c->localid,
PKT_STR, hostname,
PKT_INT, port,
- //PKT_STR, <org:orgport>,
+ /* PKT_STR, <org:orgport>, */
PKT_END);
} else {
- ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
- ssh2_pkt_addstring("direct-tcpip");
- ssh2_pkt_adduint32(c->localid);
- c->v.v2.locwindow = OUR_V2_WINSIZE;
- ssh2_pkt_adduint32(c->v.v2.locwindow);/* our window size */
- ssh2_pkt_adduint32(0x4000UL); /* our max pkt size */
- ssh2_pkt_addstring(hostname);
- ssh2_pkt_adduint32(port);
+ pktout = ssh2_chanopen_init(c, "direct-tcpip");
+ ssh2_pkt_addstring(pktout, hostname);
+ ssh2_pkt_adduint32(pktout, port);
/*
* We make up values for the originator data; partly it's
* too much hassle to keep track, and partly I'm not
* convinced the server should be told details like that
* about my local network configuration.
+ * The "originator IP address" is syntactically a numeric
+ * IP address, and some servers (e.g., Tectia) get upset
+ * if it doesn't match this syntax.
*/
- ssh2_pkt_addstring("client-side-connection");
- ssh2_pkt_adduint32(0);
- ssh2_pkt_send();
+ ssh2_pkt_addstring(pktout, "0.0.0.0");
+ ssh2_pkt_adduint32(pktout, 0);
+ ssh2_pkt_send(ssh, pktout);
}
}
-
-static Socket ssh_socket(void)
+static int ssh_connected(void *handle)
{
- return s;
+ Ssh ssh = (Ssh) handle;
+ return ssh->s != NULL;
}
-static int ssh_sendok(void)
+static int ssh_sendok(void *handle)
{
- return ssh_send_ok;
+ Ssh ssh = (Ssh) handle;
+ return ssh->send_ok;
}
-static int ssh_ldisc(int option)
+static int ssh_ldisc(void *handle, int option)
{
+ Ssh ssh = (Ssh) handle;
if (option == LD_ECHO)
- return ssh_echoing;
+ return ssh->echoing;
if (option == LD_EDIT)
- return ssh_editing;
+ return ssh->editing;
return FALSE;
}
-static int ssh_return_exitcode(void)
+static void ssh_provide_ldisc(void *handle, void *ldisc)
+{
+ Ssh ssh = (Ssh) handle;
+ ssh->ldisc = ldisc;
+}
+
+static void ssh_provide_logctx(void *handle, void *logctx)
+{
+ Ssh ssh = (Ssh) handle;
+ ssh->logctx = logctx;
+}
+
+static int ssh_return_exitcode(void *handle)
+{
+ Ssh ssh = (Ssh) handle;
+ if (ssh->s != NULL)
+ return -1;
+ else
+ return (ssh->exitcode >= 0 ? ssh->exitcode : INT_MAX);
+}
+
+/*
+ * cfg_info for SSH is the currently running version of the
+ * protocol. (1 for 1; 2 for 2; 0 for not-decided-yet.)
+ */
+static int ssh_cfg_info(void *handle)
+{
+ Ssh ssh = (Ssh) handle;
+ return ssh->version;
+}
+
+/*
+ * Gross hack: pscp will try to start SFTP but fall back to scp1 if
+ * that fails. This variable is the means by which scp.c can reach
+ * into the SSH code and find out which one it got.
+ */
+extern int ssh_fallback_cmd(void *handle)
{
- return ssh_exitcode;
+ Ssh ssh = (Ssh) handle;
+ return ssh->fallback_cmd;
}
Backend ssh_backend = {
ssh_init,
+ ssh_free,
+ ssh_reconfig,
ssh_send,
ssh_sendbuffer,
ssh_size,
ssh_special,
- ssh_socket,
+ ssh_get_specials,
+ ssh_connected,
ssh_return_exitcode,
ssh_sendok,
ssh_ldisc,
+ ssh_provide_ldisc,
+ ssh_provide_logctx,
ssh_unthrottle,
+ ssh_cfg_info,
+ "ssh",
+ PROT_SSH,
22
};