X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=blobdiff_plain;ds=inline;f=README;h=72fc68c3a97009b3e109c5b8381159f60b0c595d;hb=0cc6fb8bfea07360afeac83ba67aceffb56499c8;hp=fb627ca1ca50aa83d184fc096261467b1171322e;hpb=c7498e2b189b4f1260ea9b48dc15f147a4a129b9;p=PuTTY.git
diff --git a/README b/README
index fb627ca1..72fc68c3 100644
--- a/README
+++ b/README
@@ -2,66 +2,134 @@ This is the README for the source archive of PuTTY, a free Win32
and Unix Telnet and SSH client.
If you want to rebuild PuTTY from source, we provide a variety of
-Makefiles and equivalents. (If you have fetched the source from CVS,
-you'll have to generate the Makefiles yourself -- see below.)
+Makefiles and equivalents. (If you have fetched the source from
+Subversion, you'll have to generate the Makefiles yourself -- see
+below.)
+
+There are various compile-time directives that you can use to
+disable or modify certain features; it may be necessary to do this
+in some environments. They are documented in `Recipe', and in
+comments in many of the generated Makefiles.
For building on Windows:
- - Makefile.vc is for command-line builds on MS Visual C++ systems.
- Type `nmake -f Makefile.vc' to build all the PuTTY binaries.
+ - windows/Makefile.vc is for command-line builds on MS Visual C++
+ systems. Change into the `windows' subdirectory and type `nmake
+ -f Makefile.vc' to build all the PuTTY binaries.
+
+ Last time we checked, PuTTY built with vanilla VC7, or VC6 with
+ an up-to-date Platform SDK. (It might still be possible to build
+ with vanilla VC6, but you'll certainly have to remove some
+ functionality with directives such as NO_IPV6.)
- (We've also had one report of success building with the
+ (We've also had reports of success building with the
OpenWatcom compiler -- www.openwatcom.org -- using Makefile.vc
with `wmake -ms -f makefile.vc' and NO_MULTIMON, although we
- haven't tried this ourselves.)
+ haven't tried this ourselves. Version 1.3 is reported to work.)
- - Inside the MSVC subdirectory are MS Visual Studio project files
- for doing GUI-based builds of the various PuTTY utilities. These
- have been tested on Visual Studio 6.
+ - Inside the windows/MSVC subdirectory are MS Visual Studio project
+ files for doing GUI-based builds of the various PuTTY utilities.
+ These have been tested on Visual Studio 6.
You should be able to build each PuTTY utility by loading the
corresponding .dsp file in Visual Studio. For example,
MSVC/putty/putty.dsp builds PuTTY itself, MSVC/plink/plink.dsp
builds Plink, and so on.
- - Makefile.bor is for the Borland C compiler. Type `make -f
- Makefile.bor' to build all the PuTTY binaries.
+ - windows/Makefile.bor is for the Borland C compiler. Type `make -f
+ Makefile.bor' while in the `windows' subdirectory to build all
+ the PuTTY binaries.
- - Makefile.cyg is for Cygwin / mingw32 installations. Type `make -f
- Makefile.cyg' to build all the PuTTY binaries. Note that by
- default the Pageant WinNT security features and the multiple
- monitor support are excluded from the Cygwin build, since at the
- time of writing Cygwin doesn't include the necessary headers.
+ - windows/Makefile.cyg is for Cygwin / MinGW installations. Type
+ `make -f Makefile.cyg' while in the `windows' subdirectory to
+ build all the PuTTY binaries.
- - Makefile.lcc is for lcc-win32. Type `make -f Makefile.lcc'. (You
- will probably need to specify COMPAT=-DNO_MULTIMON.)
+ You'll probably need quite a recent version of the w32api package.
+ Note that by default the multiple monitor and HTML Help support are
+ excluded from the Cygwin build, since at the time of writing Cygwin
+ doesn't include the necessary headers.
-For building on Unix:
+ - windows/Makefile.lcc is for lcc-win32. Type `make -f
+ Makefile.lcc' while in the `windows' subdirectory. (You will
+ probably need to specify COMPAT=-DNO_MULTIMON.)
- - unix/Makefile.gtk is for Unix and GTK. If you don't have GTK, you
- should still be able to build the command-line utilities (PSCP,
- PSFTP, Plink, PuTTYgen) using this makefile. The makefile expects
- you to change into the `unix' subdirectory, then run `make -f
- Makefile.gtk'. Note that Unix PuTTY has mostly only been tested
- on Linux so far; portability problems such as BSD-style ptys or
- different header file requirements are expected.
+ - Inside the windows/DEVCPP subdirectory are Dev-C++ project
+ files for doing GUI-based builds of the various PuTTY utilities.
- For the graphical utilities, Gtk+-1.2 is required. Gtk+-2.0 is not
- yet supported.
+The PuTTY team actively use Makefile.vc (with VC7) and Makefile.cyg
+(with mingw32), so we'll probably notice problems with those
+toolchains fairly quickly. Please report any problems with the other
+toolchains mentioned above.
- There is an `install' target; note that by default it tries to
- install `man' pages, which need to be built using Halibut first --
- see below.
+For building on Unix:
+
+ - unix/configure is for Unix and GTK. If you don't have GTK, you
+ should still be able to build the command-line utilities (PSCP,
+ PSFTP, Plink, PuTTYgen) using this script. To use it, change into
+ the `unix' subdirectory, run `./configure' and then `make'. Or you
+ can do the same in the top-level directory (we provide a little
+ wrapper that invokes configure one level down), which is more like
+ a normal Unix source archive but doesn't do so well at keeping the
+ per-platform stuff in each platform's subdirectory; it's up to you.
+
+ Note that Unix PuTTY has mostly only been tested on Linux so far;
+ portability problems such as BSD-style ptys or different header file
+ requirements are expected.
+
+ - unix/Makefile.gtk and unix/Makefile.ux are for non-autoconfigured
+ builds. These makefiles expect you to change into the `unix'
+ subdirectory, then run `make -f Makefile.gtk' or `make -f
+ Makefile.ux' respectively. Makefile.gtk builds all the programs but
+ relies on Gtk, whereas Makefile.ux builds only the command-line
+ utilities and has no Gtk dependence.
+
+ - For the graphical utilities, Gtk+-1.2 and Gtk+-2.0 should both be
+ supported. If you have both installed, you can manually specify
+ which one you want by giving the option '--with-gtk=1' or
+ '--with-gtk=2' to the configure script. (2 is the default, of
+ course.) In the absence of either, the configure script will
+ automatically construct a Makefile which builds only the
+ command-line utilities; you can manually create this condition by
+ giving configure the option '--without-gtk'.
+
+ - pterm would like to be setuid or setgid, as appropriate, to permit
+ it to write records of user logins to /var/run/utmp and
+ /var/log/wtmp. (Of course it will not use this privilege for
+ anything else, and in particular it will drop all privileges before
+ starting up complex subsystems like GTK.) By default the makefile
+ will not attempt to add privileges to the pterm executable at 'make
+ install' time, but you can ask it to do so by running configure
+ with the option '--enable-setuid=USER' or '--enable-setgid=GROUP'.
+
+ - The Unix Makefiles have an `install' target. Note that by default
+ it tries to install `man' pages; if you have fetched the source via
+ Subversion then you will need to have built these using Halibut
+ first - see below.
+
+ - It's also possible to build the Windows version of PuTTY to run
+ on Unix by using Winelib. To do this, change to the `windows'
+ directory and run `make -f Makefile.cyg CC=winegcc RC=wrc'.
All of the Makefiles are generated automatically from the file
-`Recipe' by the Perl script `mkfiles.pl'. Additions and corrections
-to Recipe and the mkfiles.pl are much more useful than additions and
-corrections to the alternative Makefiles themselves.
+`Recipe' by the Perl script `mkfiles.pl' (except for the Unix one,
+which is generated by the `configure' script; mkfiles.pl only
+generates the input to automake). Additions and corrections to Recipe,
+mkfiles.pl and/or configure.ac are much more useful than additions and
+corrections to the actual Makefiles, Makefile.am or Makefile.in.
+
+The Unix `configure' script and its various requirements are generated
+by the shell script `mkauto.sh', which requires GNU Autoconf, GNU
+Automake, and Gtk; if you've got the source from Subversion rather
+than using one of our source snapshots, you'll need to run this
+yourself. The input file to Automake is generated by mkfiles.pl along
+with all the rest of the makefiles, so you will need to run mkfiles.pl
+and then mkauto.sh.
Documentation (in various formats including Windows Help and Unix
-`man' pages) is to be built from the Halibut (`.but') files in the
-`doc' subdirectory using `doc/Makefile'. Halibut can be found at
-.
+`man' pages) is built from the Halibut (`.but') files in the `doc'
+subdirectory using `doc/Makefile'. If you aren't using one of our
+source snapshots, you'll need to do this yourself. Halibut can be
+found at .
The PuTTY home web site is