X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fnet%2Fethernet%2Fmicrel%2Fks8851_mll.c;h=1c9e70c8cc30ffbd5700a7278aebd53f00152fe2;hb=b98b809c0a1311239605e8d2ce1583191d3efd5b;hp=a41a90c589db2d2e85863e6da3850307d5e2a488;hpb=9b326948c23908692d7dfe56ed149840d3829eaa;p=linux.git

diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index a41a90c589db..1c9e70c8cc30 100644
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -156,24 +156,6 @@ static int msg_enable;
  * chip is busy transferring packet data (RX/TX FIFO accesses).
  */
 
-/**
- * ks_rdreg8 - read 8 bit register from device
- * @ks	  : The chip information
- * @offset: The register address
- *
- * Read a 8bit register from the chip, returning the result
- */
-static u8 ks_rdreg8(struct ks_net *ks, int offset)
-{
-	u16 data;
-	u8 shift_bit = offset & 0x03;
-	u8 shift_data = (offset & 1) << 3;
-	ks->cmd_reg_cache = (u16) offset | (u16)(BE0 << shift_bit);
-	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
-	data  = ioread16(ks->hw_addr);
-	return (u8)(data >> shift_data);
-}
-
 /**
  * ks_rdreg16 - read 16 bit register from device
  * @ks	  : The chip information
@@ -184,27 +166,11 @@ static u8 ks_rdreg8(struct ks_net *ks, int offset)
 
 static u16 ks_rdreg16(struct ks_net *ks, int offset)
 {
-	ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
+	ks->cmd_reg_cache = (u16)offset | ((BE3 | BE2) >> (offset & 0x02));
 	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
 	return ioread16(ks->hw_addr);
 }
 
-/**
- * ks_wrreg8 - write 8bit register value to chip
- * @ks: The chip information
- * @offset: The register address
- * @value: The value to write
- *
- */
-static void ks_wrreg8(struct ks_net *ks, int offset, u8 value)
-{
-	u8  shift_bit = (offset & 0x03);
-	u16 value_write = (u16)(value << ((offset & 1) << 3));
-	ks->cmd_reg_cache = (u16)offset | (BE0 << shift_bit);
-	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
-	iowrite16(value_write, ks->hw_addr);
-}
-
 /**
  * ks_wrreg16 - write 16bit register value to chip
  * @ks: The chip information
@@ -215,7 +181,7 @@ static void ks_wrreg8(struct ks_net *ks, int offset, u8 value)
 
 static void ks_wrreg16(struct ks_net *ks, int offset, u16 value)
 {
-	ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
+	ks->cmd_reg_cache = (u16)offset | ((BE3 | BE2) >> (offset & 0x02));
 	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
 	iowrite16(value, ks->hw_addr);
 }
@@ -231,7 +197,7 @@ static inline void ks_inblk(struct ks_net *ks, u16 *wptr, u32 len)
 {
 	len >>= 1;
 	while (len--)
-		*wptr++ = (u16)ioread16(ks->hw_addr);
+		*wptr++ = be16_to_cpu(ioread16(ks->hw_addr));
 }
 
 /**
@@ -245,7 +211,7 @@ static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len)
 {
 	len >>= 1;
 	while (len--)
-		iowrite16(*wptr++, ks->hw_addr);
+		iowrite16(cpu_to_be16(*wptr++), ks->hw_addr);
 }
 
 static void ks_disable_int(struct ks_net *ks)
@@ -324,8 +290,7 @@ static void ks_read_config(struct ks_net *ks)
 	u16 reg_data = 0;
 
 	/* Regardless of bus width, 8 bit read should always work.*/
-	reg_data = ks_rdreg8(ks, KS_CCR) & 0x00FF;
-	reg_data |= ks_rdreg8(ks, KS_CCR+1) << 8;
+	reg_data = ks_rdreg16(ks, KS_CCR);
 
 	/* addr/data bus are multiplexed */
 	ks->sharedbus = (reg_data & CCR_SHARED) == CCR_SHARED;
@@ -429,7 +394,7 @@ static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len)
 
 	/* 1. set sudo DMA mode */
 	ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI);
-	ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff);
+	ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
 
 	/* 2. read prepend data */
 	/**
@@ -446,7 +411,7 @@ static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len)
 	ks_inblk(ks, buf, ALIGN(len, 4));
 
 	/* 4. reset sudo DMA Mode */
-	ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr);
+	ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
 }
 
 /**
@@ -679,13 +644,13 @@ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
 	ks->txh.txw[1] = cpu_to_le16(len);
 
 	/* 1. set sudo-DMA mode */
-	ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff);
+	ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
 	/* 2. write status/lenth info */
 	ks_outblk(ks, ks->txh.txw, 4);
 	/* 3. write pkt data */
 	ks_outblk(ks, (u16 *)pdata, ALIGN(len, 4));
 	/* 4. reset sudo-DMA mode */
-	ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr);
+	ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
 	/* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */
 	ks_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
 	/* 6. wait until TXQCR_METFE is auto-cleared */