+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for GPIO bitbanged I2C
+
+maintainers:
+ - Wolfram Sang <wolfram@the-dreams.de>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: i2c-gpio
+
+ sda-gpios:
+ description:
+ gpio used for the sda signal, this should be flagged as
+ active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+ from <dt-bindings/gpio/gpio.h> since the signal is by definition
+ open drain.
+ maxItems: 1
+
+ scl-gpios:
+ description:
+ gpio used for the scl signal, this should be flagged as
+ active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+ from <dt-bindings/gpio/gpio.h> since the signal is by definition
+ open drain.
+ maxItems: 1
+
+ i2c-gpio,scl-output-only:
+ description: scl as output only
+ type: boolean
+
+ i2c-gpio,delay-us:
+ description: delay between GPIO operations (may depend on each platform)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ i2c-gpio,timeout-ms:
+ description: timeout to get data
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ # Deprecated properties, do not use in new device tree sources:
+ gpios:
+ minItems: 2
+ maxItems: 2
+ description: sda and scl gpio, alternative for {sda,scl}-gpios
+
+ i2c-gpio,sda-open-drain:
+ # Generate a warning if present
+ not: true
+ description: this means that something outside of our control has put
+ the GPIO line used for SDA into open drain mode, and that something is
+ not the GPIO chip. It is essentially an inconsistency flag.
+
+ i2c-gpio,scl-open-drain:
+ # Generate a warning if present
+ not: true
+ description: this means that something outside of our control has put the
+ GPIO line used for SCL into open drain mode, and that something is not
+ the GPIO chip. It is essentially an inconsistency flag.
+
+required:
+ - compatible
+ - sda-gpios
+ - scl-gpios
+
+...