Say N otherwise.
config I8K
- tristate "Dell laptop support"
+ tristate "Dell i8k legacy laptop support"
select HWMON
+ select SENSORS_DELL_SMM
---help---
- This adds a driver to safely access the System Management Mode
- of the CPU on the Dell Inspiron 8000. The System Management Mode
- is used to read cpu temperature and cooling fan status and to
- control the fans on the I8K portables.
+ This option enables legacy /proc/i8k userspace interface in hwmon
+ dell-smm-hwmon driver. Character file /proc/i8k reports bios version,
+ temperature and allows controlling fan speeds of Dell laptops via
+ System Management Mode. For old Dell laptops (like Dell Inspiron 8000)
+ it reports also power and hotkey status. For fan speed control is
+ needed userspace package i8kutils.
- This driver has been tested only on the Inspiron 8000 but it may
- also work with other Dell laptops. You can force loading on other
- models by passing the parameter `force=1' to the module. Use at
- your own risk.
-
- For information on utilities to make use of this driver see the
- I8K Linux utilities web site at:
- <http://people.debian.org/~dz/i8k/>
-
- Say Y if you intend to run this kernel on a Dell Inspiron 8000.
+ Say Y if you intend to run this kernel on old Dell laptops or want to
+ use userspace package i8kutils.
Say N otherwise.
config X86_REBOOTFIXUPS
MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
-MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops");
+MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("i8k");
module_param(ignore_dmi, bool, 0);
MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match");
+#if IS_ENABLED(CONFIG_I8K)
static bool restricted;
module_param(restricted, bool, 0);
MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
static bool power_status;
module_param(power_status, bool, 0600);
MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
+#endif
static uint fan_mult;
module_param(fan_mult, uint, 0);
module_param(fan_max, uint, 0);
MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)");
-static int i8k_open_fs(struct inode *inode, struct file *file);
-static long i8k_ioctl(struct file *, unsigned int, unsigned long);
-
-static const struct file_operations i8k_fops = {
- .owner = THIS_MODULE,
- .open = i8k_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .unlocked_ioctl = i8k_ioctl,
-};
-
struct smm_regs {
unsigned int eax;
unsigned int ebx __packed;
return rc;
}
-/*
- * Read the Fn key status.
- */
-static int i8k_get_fn_status(void)
-{
- struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, };
- int rc;
-
- rc = i8k_smm(®s);
- if (rc < 0)
- return rc;
-
- switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) {
- case I8K_FN_UP:
- return I8K_VOL_UP;
- case I8K_FN_DOWN:
- return I8K_VOL_DOWN;
- case I8K_FN_MUTE:
- return I8K_VOL_MUTE;
- default:
- return 0;
- }
-}
-
-/*
- * Read the power status.
- */
-static int i8k_get_power_status(void)
-{
- struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, };
- int rc;
-
- rc = i8k_smm(®s);
- if (rc < 0)
- return rc;
-
- return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY;
-}
-
/*
* Read the fan status.
*/
return regs.eax == 1145651527 && regs.edx == 1145392204 ? 0 : -1;
}
+#if IS_ENABLED(CONFIG_I8K)
+
+/*
+ * Read the Fn key status.
+ */
+static int i8k_get_fn_status(void)
+{
+ struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, };
+ int rc;
+
+ rc = i8k_smm(®s);
+ if (rc < 0)
+ return rc;
+
+ switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) {
+ case I8K_FN_UP:
+ return I8K_VOL_UP;
+ case I8K_FN_DOWN:
+ return I8K_VOL_DOWN;
+ case I8K_FN_MUTE:
+ return I8K_VOL_MUTE;
+ default:
+ return 0;
+ }
+}
+
+/*
+ * Read the power status.
+ */
+static int i8k_get_power_status(void)
+{
+ struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, };
+ int rc;
+
+ rc = i8k_smm(®s);
+ if (rc < 0)
+ return rc;
+
+ return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY;
+}
+
+/*
+ * Procfs interface
+ */
+
static int
i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg)
{
return single_open(file, i8k_proc_show, NULL);
}
+static const struct file_operations i8k_fops = {
+ .owner = THIS_MODULE,
+ .open = i8k_open_fs,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .unlocked_ioctl = i8k_ioctl,
+};
+
+static void __init i8k_init_procfs(void)
+{
+ /* Register the proc entry */
+ proc_create("i8k", 0, NULL, &i8k_fops);
+}
+
+static void __exit i8k_exit_procfs(void)
+{
+ remove_proc_entry("i8k", NULL);
+}
+
+#else
+
+static inline void __init i8k_init_procfs(void)
+{
+}
+
+static inline void __exit i8k_exit_procfs(void)
+{
+}
+
+#endif
/*
* Hwmon interface
if (err >= 0)
i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN2;
- i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "i8k", NULL,
- i8k_groups);
+ i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "dell-smm",
+ NULL, i8k_groups);
if (IS_ERR(i8k_hwmon_dev)) {
err = PTR_ERR(i8k_hwmon_dev);
i8k_hwmon_dev = NULL;
static int __init i8k_init(void)
{
- struct proc_dir_entry *proc_i8k;
int err;
/* Are we running on an supported laptop? */
if (i8k_probe())
return -ENODEV;
- /* Register the proc entry */
- proc_i8k = proc_create("i8k", 0, NULL, &i8k_fops);
- if (!proc_i8k)
- return -ENOENT;
-
err = i8k_init_hwmon();
if (err)
- goto exit_remove_proc;
+ return err;
+ i8k_init_procfs();
return 0;
-
- exit_remove_proc:
- remove_proc_entry("i8k", NULL);
- return err;
}
static void __exit i8k_exit(void)
{
hwmon_device_unregister(i8k_hwmon_dev);
- remove_proc_entry("i8k", NULL);
+ i8k_exit_procfs();
}
module_init(i8k_init);
projects / linux.git / commitdiff