dt-bindings: max3421: Add bindings documentation

Adds bindings documentation for the max3421 driver.

Signed-off-by: Jules Maselbas <jules.maselbas@grenoble-inp.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/Documentation/devicetree/bindings/usb/maxim,max3421.txt b/Documentation/devicetree/bindings/usb/maxim,max3421.txt
new file mode 100644 (file)
index 0000000..7536c3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/maxim,max3421.txt
@@ -0,0 +1,24 @@
+Maxim Integrated SPI-based USB 2.0 host controller MAX3421E
+
+Required properties:
+ - compatible: "maxim,max3421"
+ - spi-max-frequency: maximum frequency for this device must not exceed 26 MHz.
+ - reg: chip select number to which this device is connected.
+ - maxim,vbus-en-pin: <GPOUTx ACTIVE_LEVEL>
+   GPOUTx is the number (1-8) of the GPOUT pin of MAX3421E to drive Vbus.
+   ACTIVE_LEVEL is 0 or 1.
+ - interrupt-parent: the phandle of the associated interrupt controller.
+ - interrupts: the interuption line description for the interrupt controller.
+   The driver configures MAX3421E for active low level triggered interrupts,
+   configure your interrupt line accordingly.
+
+Example:
+
+       usb@0 {
+               compatible = "maxim,max3421";
+               reg = <0>;
+               maxim,vbus-en-pin = <3 1>;
+               spi-max-frequency = <26000000>;
+               interrupt-parent = <&PIC>;
+               interrupts = <42>;
+       };