Input: pixcir_i2c_ts - move definitions into a single file

All the defined symbols from linux/platform_data/pixcir_i2c_ts.h
are only used by the pixcir_i2c_ts driver, so move all the definitions
locally and get rid of the pixcir_i2c_ts.h file.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 4561d65e7a1ef0c258be786c0560211299de3d20..acc9504aa35baa71eece3123acf0f81dcda16dd7 100644 (file)
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -15,11 +15,69 @@
 #include <linux/input/touchscreen.h>
 #include <linux/gpio/consumer.h>
 #include <linux/of_device.h>
-#include <linux/platform_data/pixcir_i2c_ts.h>
 #include <asm/unaligned.h>
 
 #define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */
 
+/*
+ * Register map
+ */
+#define PIXCIR_REG_POWER_MODE  51
+#define PIXCIR_REG_INT_MODE    52
+
+/*
+ * Power modes:
+ * active: max scan speed
+ * idle: lower scan speed with automatic transition to active on touch
+ * halt: datasheet says sleep but this is more like halt as the chip
+ *       clocks are cut and it can only be brought out of this mode
+ *      using the RESET pin.
+ */
+enum pixcir_power_mode {
+       PIXCIR_POWER_ACTIVE,
+       PIXCIR_POWER_IDLE,
+       PIXCIR_POWER_HALT,
+};
+
+#define PIXCIR_POWER_MODE_MASK 0x03
+#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2)
+
+/*
+ * Interrupt modes:
+ * periodical: interrupt is asserted periodicaly
+ * diff coordinates: interrupt is asserted when coordinates change
+ * level on touch: interrupt level asserted during touch
+ * pulse on touch: interrupt pulse asserted during touch
+ *
+ */
+enum pixcir_int_mode {
+       PIXCIR_INT_PERIODICAL,
+       PIXCIR_INT_DIFF_COORD,
+       PIXCIR_INT_LEVEL_TOUCH,
+       PIXCIR_INT_PULSE_TOUCH,
+};
+
+#define PIXCIR_INT_MODE_MASK   0x03
+#define PIXCIR_INT_ENABLE      (1UL << 3)
+#define PIXCIR_INT_POL_HIGH    (1UL << 2)
+
+/**
+ * struct pixcir_irc_chip_data - chip related data
+ * @max_fingers:       Max number of fingers reported simultaneously by h/w
+ * @has_hw_ids:                Hardware supports finger tracking IDs
+ *
+ */
+struct pixcir_i2c_chip_data {
+       u8 max_fingers;
+       bool has_hw_ids;
+};
+
+struct pixcir_ts_platform_data {
+       int x_max;
+       int y_max;
+       struct pixcir_i2c_chip_data chip;
+};
+
 struct pixcir_i2c_ts_data {
        struct i2c_client *client;
        struct input_dev *input;

diff --git a/include/linux/platform_data/pixcir_i2c_ts.h b/include/linux/platform_data/pixcir_i2c_ts.h
deleted file mode 100644 (file)
index 4ab3cd6..0000000
--- a/include/linux/platform_data/pixcir_i2c_ts.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef        _PIXCIR_I2C_TS_H
-#define        _PIXCIR_I2C_TS_H
-
-/*
- * Register map
- */
-#define PIXCIR_REG_POWER_MODE  51
-#define PIXCIR_REG_INT_MODE    52
-
-/*
- * Power modes:
- * active: max scan speed
- * idle: lower scan speed with automatic transition to active on touch
- * halt: datasheet says sleep but this is more like halt as the chip
- *       clocks are cut and it can only be brought out of this mode
- *      using the RESET pin.
- */
-enum pixcir_power_mode {
-       PIXCIR_POWER_ACTIVE,
-       PIXCIR_POWER_IDLE,
-       PIXCIR_POWER_HALT,
-};
-
-#define PIXCIR_POWER_MODE_MASK 0x03
-#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2)
-
-/*
- * Interrupt modes:
- * periodical: interrupt is asserted periodicaly
- * diff coordinates: interrupt is asserted when coordinates change
- * level on touch: interrupt level asserted during touch
- * pulse on touch: interrupt pulse asserted druing touch
- *
- */
-enum pixcir_int_mode {
-       PIXCIR_INT_PERIODICAL,
-       PIXCIR_INT_DIFF_COORD,
-       PIXCIR_INT_LEVEL_TOUCH,
-       PIXCIR_INT_PULSE_TOUCH,
-};
-
-#define PIXCIR_INT_MODE_MASK   0x03
-#define PIXCIR_INT_ENABLE      (1UL << 3)
-#define PIXCIR_INT_POL_HIGH    (1UL << 2)
-
-/**
- * struct pixcir_irc_chip_data - chip related data
- * @max_fingers:       Max number of fingers reported simultaneously by h/w
- * @has_hw_ids:                Hardware supports finger tracking IDs
- *
- */
-struct pixcir_i2c_chip_data {
-       u8 max_fingers;
-       bool has_hw_ids;
-};
-
-struct pixcir_ts_platform_data {
-       int x_max;
-       int y_max;
-       struct pixcir_i2c_chip_data chip;
-};
-
-#endif