]> asedeno.scripts.mit.edu Git - linux.git/commitdiff
NET: Add ezchip ethernet driver
authorNoam Camus <noamc@ezchip.com>
Tue, 23 Jun 2015 08:43:53 +0000 (11:43 +0300)
committerDavid S. Miller <davem@davemloft.net>
Tue, 23 Jun 2015 14:16:25 +0000 (07:16 -0700)
Simple LAN device for debug or management purposes.
Device supports interrupts for RX and TX(completion).
Device does not have DMA ability.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Tal Zilcer <talz@ezchip.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation/devicetree/bindings/net/ezchip_enet.txt [new file with mode: 0644]
drivers/net/ethernet/Kconfig
drivers/net/ethernet/Makefile
drivers/net/ethernet/ezchip/Kconfig [new file with mode: 0644]
drivers/net/ethernet/ezchip/Makefile [new file with mode: 0644]
drivers/net/ethernet/ezchip/nps_enet.c [new file with mode: 0644]
drivers/net/ethernet/ezchip/nps_enet.h [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/net/ezchip_enet.txt b/Documentation/devicetree/bindings/net/ezchip_enet.txt
new file mode 100644 (file)
index 0000000..4e29b2b
--- /dev/null
@@ -0,0 +1,15 @@
+* EZchip NPS Management Ethernet port driver
+
+Required properties:
+- compatible: Should be "ezchip,nps-mgt-enet"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the ENET interrupt
+
+Examples:
+
+       ethernet@f0003000 {
+               compatible = "ezchip,nps-mgt-enet";
+               reg = <0xf0003000 0x44>;
+               interrupts = <7>;
+               mac-address = [ 00 11 22 33 44 55 ];
+       };
index 9a8308553520318d7aa78ed3114e0e17064ddd1e..f3bb1784066baf51c97f464a1677aac50f781cdb 100644 (file)
@@ -67,6 +67,7 @@ config DNET
 source "drivers/net/ethernet/dec/Kconfig"
 source "drivers/net/ethernet/dlink/Kconfig"
 source "drivers/net/ethernet/emulex/Kconfig"
+source "drivers/net/ethernet/ezchip/Kconfig"
 source "drivers/net/ethernet/neterion/Kconfig"
 source "drivers/net/ethernet/faraday/Kconfig"
 source "drivers/net/ethernet/freescale/Kconfig"
index 4395d99115a00134dc25e3e00185348e0ed17d05..c51014b0464f604c0f41118d8dff625e4993aa12 100644 (file)
@@ -30,6 +30,7 @@ obj-$(CONFIG_DNET) += dnet.o
 obj-$(CONFIG_NET_VENDOR_DEC) += dec/
 obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
 obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
+obj-$(CONFIG_NET_VENDOR_EZCHIP) += ezchip/
 obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
 obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
 obj-$(CONFIG_NET_VENDOR_FREESCALE) += freescale/
diff --git a/drivers/net/ethernet/ezchip/Kconfig b/drivers/net/ethernet/ezchip/Kconfig
new file mode 100644 (file)
index 0000000..48ecbc8
--- /dev/null
@@ -0,0 +1,26 @@
+#
+# EZchip network device configuration
+#
+
+config NET_VENDOR_EZCHIP
+       bool "EZchip devices"
+       default y
+       ---help---
+         If you have a network (Ethernet) device belonging to this class, say Y.
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about EZchip devices. If you say Y, you will be asked for
+         your specific device in the following questions.
+
+if NET_VENDOR_EZCHIP
+
+config EZCHIP_NPS_MANAGEMENT_ENET
+       tristate "EZchip NPS management enet support"
+       depends on OF_IRQ && OF_NET
+       ---help---
+         Simple LAN device for debug or management purposes.
+         Device supports interrupts for RX and TX(completion).
+         Device does not have DMA ability.
+
+endif
diff --git a/drivers/net/ethernet/ezchip/Makefile b/drivers/net/ethernet/ezchip/Makefile
new file mode 100644 (file)
index 0000000..e490176
--- /dev/null
@@ -0,0 +1 @@
+obj-$(CONFIG_EZCHIP_NPS_MANAGEMENT_ENET) += nps_enet.o
diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c
new file mode 100644 (file)
index 0000000..24a85b2
--- /dev/null
@@ -0,0 +1,658 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include "nps_enet.h"
+
+#define DRV_NAME                       "nps_mgt_enet"
+
+static void nps_enet_clean_rx_fifo(struct net_device *ndev, u32 frame_len)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       u32 i, len = DIV_ROUND_UP(frame_len, sizeof(u32));
+
+       /* Empty Rx FIFO buffer by reading all words */
+       for (i = 0; i < len; i++)
+               nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF);
+}
+
+static void nps_enet_read_rx_fifo(struct net_device *ndev,
+                                 unsigned char *dst, u32 length)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       s32 i, last = length & (sizeof(u32) - 1);
+       u32 *reg = (u32 *)dst, len = length / sizeof(u32);
+       bool dst_is_aligned = IS_ALIGNED((unsigned long)dst, sizeof(u32));
+
+       /* In case dst is not aligned we need an intermediate buffer */
+       if (dst_is_aligned)
+               for (i = 0; i < len; i++, reg++)
+                       *reg = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF);
+       else { /* !dst_is_aligned */
+               for (i = 0; i < len; i++, reg++) {
+                       u32 buf =
+                               nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF);
+
+                       /* to accommodate word-unaligned address of "reg"
+                        * we have to do memcpy_toio() instead of simple "=".
+                        */
+                       memcpy_toio((void __iomem *)reg, &buf, sizeof(buf));
+               }
+       }
+
+       /* copy last bytes (if any) */
+       if (last) {
+               u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF);
+
+               memcpy_toio((void __iomem *)reg, &buf, last);
+       }
+}
+
+static u32 nps_enet_rx_handler(struct net_device *ndev)
+{
+       u32 frame_len, err = 0;
+       u32 work_done = 0;
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       struct sk_buff *skb;
+       struct nps_enet_rx_ctl rx_ctrl;
+
+       rx_ctrl.value = nps_enet_reg_get(priv, NPS_ENET_REG_RX_CTL);
+       frame_len = rx_ctrl.nr;
+
+       /* Check if we got RX */
+       if (!rx_ctrl.cr)
+               return work_done;
+
+       /* If we got here there is a work for us */
+       work_done++;
+
+       /* Check Rx error */
+       if (rx_ctrl.er) {
+               ndev->stats.rx_errors++;
+               err = 1;
+       }
+
+       /* Check Rx CRC error */
+       if (rx_ctrl.crc) {
+               ndev->stats.rx_crc_errors++;
+               ndev->stats.rx_dropped++;
+               err = 1;
+       }
+
+       /* Check Frame length Min 64b */
+       if (unlikely(frame_len < ETH_ZLEN)) {
+               ndev->stats.rx_length_errors++;
+               ndev->stats.rx_dropped++;
+               err = 1;
+       }
+
+       if (err)
+               goto rx_irq_clean;
+
+       /* Skb allocation */
+       skb = netdev_alloc_skb_ip_align(ndev, frame_len);
+       if (unlikely(!skb)) {
+               ndev->stats.rx_errors++;
+               ndev->stats.rx_dropped++;
+               goto rx_irq_clean;
+       }
+
+       /* Copy frame from Rx fifo into the skb */
+       nps_enet_read_rx_fifo(ndev, skb->data, frame_len);
+
+       skb_put(skb, frame_len);
+       skb->protocol = eth_type_trans(skb, ndev);
+       skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+       ndev->stats.rx_packets++;
+       ndev->stats.rx_bytes += frame_len;
+       netif_receive_skb(skb);
+
+       goto rx_irq_frame_done;
+
+rx_irq_clean:
+       /* Clean Rx fifo */
+       nps_enet_clean_rx_fifo(ndev, frame_len);
+
+rx_irq_frame_done:
+       /* Ack Rx ctrl register */
+       nps_enet_reg_set(priv, NPS_ENET_REG_RX_CTL, 0);
+
+       return work_done;
+}
+
+static void nps_enet_tx_handler(struct net_device *ndev)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       struct nps_enet_tx_ctl tx_ctrl;
+
+       tx_ctrl.value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL);
+
+       /* Check if we got TX */
+       if (!priv->tx_packet_sent || tx_ctrl.ct)
+               return;
+
+       /* Check Tx transmit error */
+       if (unlikely(tx_ctrl.et)) {
+               ndev->stats.tx_errors++;
+       } else {
+               ndev->stats.tx_packets++;
+               ndev->stats.tx_bytes += tx_ctrl.nt;
+       }
+
+       if (priv->tx_skb) {
+               dev_kfree_skb(priv->tx_skb);
+               priv->tx_skb = NULL;
+       }
+
+       priv->tx_packet_sent = false;
+
+       if (netif_queue_stopped(ndev))
+               netif_wake_queue(ndev);
+}
+
+/**
+ * nps_enet_poll - NAPI poll handler.
+ * @napi:       Pointer to napi_struct structure.
+ * @budget:     How many frames to process on one call.
+ *
+ * returns:     Number of processed frames
+ */
+static int nps_enet_poll(struct napi_struct *napi, int budget)
+{
+       struct net_device *ndev = napi->dev;
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       struct nps_enet_buf_int_enable buf_int_enable;
+       u32 work_done;
+
+       buf_int_enable.rx_rdy = NPS_ENET_ENABLE;
+       buf_int_enable.tx_done = NPS_ENET_ENABLE;
+       nps_enet_tx_handler(ndev);
+       work_done = nps_enet_rx_handler(ndev);
+       if (work_done < budget) {
+               napi_complete(napi);
+               nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE,
+                                buf_int_enable.value);
+       }
+
+       return work_done;
+}
+
+/**
+ * nps_enet_irq_handler - Global interrupt handler for ENET.
+ * @irq:                irq number.
+ * @dev_instance:       device instance.
+ *
+ * returns: IRQ_HANDLED for all cases.
+ *
+ * EZchip ENET has 2 interrupt causes, and depending on bits raised in
+ * CTRL registers we may tell what is a reason for interrupt to fire up.
+ * We got one for RX and the other for TX (completion).
+ */
+static irqreturn_t nps_enet_irq_handler(s32 irq, void *dev_instance)
+{
+       struct net_device *ndev = dev_instance;
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       struct nps_enet_buf_int_cause buf_int_cause;
+
+       buf_int_cause.value =
+                       nps_enet_reg_get(priv, NPS_ENET_REG_BUF_INT_CAUSE);
+
+       if (buf_int_cause.tx_done || buf_int_cause.rx_rdy)
+               if (likely(napi_schedule_prep(&priv->napi))) {
+                       nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0);
+                       __napi_schedule(&priv->napi);
+               }
+
+       return IRQ_HANDLED;
+}
+
+static void nps_enet_set_hw_mac_address(struct net_device *ndev)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       struct nps_enet_ge_mac_cfg_1 ge_mac_cfg_1;
+       struct nps_enet_ge_mac_cfg_2 *ge_mac_cfg_2 = &priv->ge_mac_cfg_2;
+
+       /* set MAC address in HW */
+       ge_mac_cfg_1.octet_0 = ndev->dev_addr[0];
+       ge_mac_cfg_1.octet_1 = ndev->dev_addr[1];
+       ge_mac_cfg_1.octet_2 = ndev->dev_addr[2];
+       ge_mac_cfg_1.octet_3 = ndev->dev_addr[3];
+       ge_mac_cfg_2->octet_4 = ndev->dev_addr[4];
+       ge_mac_cfg_2->octet_5 = ndev->dev_addr[5];
+
+       nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_1,
+                        ge_mac_cfg_1.value);
+
+       nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2,
+                        ge_mac_cfg_2->value);
+}
+
+/**
+ * nps_enet_hw_reset - Reset the network device.
+ * @ndev:       Pointer to the network device.
+ *
+ * This function reset the PCS and TX fifo.
+ * The programming model is to set the relevant reset bits
+ * wait for some time for this to propagate and then unset
+ * the reset bits. This way we ensure that reset procedure
+ * is done successfully by device.
+ */
+static void nps_enet_hw_reset(struct net_device *ndev)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       struct nps_enet_ge_rst ge_rst;
+       struct nps_enet_phase_fifo_ctl phase_fifo_ctl;
+
+       ge_rst.value = 0;
+       phase_fifo_ctl.value = 0;
+       /* Pcs reset sequence*/
+       ge_rst.gmac_0 = NPS_ENET_ENABLE;
+       nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst.value);
+       usleep_range(10, 20);
+       ge_rst.value = 0;
+       nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst.value);
+
+       /* Tx fifo reset sequence */
+       phase_fifo_ctl.rst = NPS_ENET_ENABLE;
+       phase_fifo_ctl.init = NPS_ENET_ENABLE;
+       nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL,
+                        phase_fifo_ctl.value);
+       usleep_range(10, 20);
+       phase_fifo_ctl.value = 0;
+       nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL,
+                        phase_fifo_ctl.value);
+}
+
+static void nps_enet_hw_enable_control(struct net_device *ndev)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       struct nps_enet_ge_mac_cfg_0 ge_mac_cfg_0;
+       struct nps_enet_buf_int_enable buf_int_enable;
+       struct nps_enet_ge_mac_cfg_2 *ge_mac_cfg_2 = &priv->ge_mac_cfg_2;
+       struct nps_enet_ge_mac_cfg_3 *ge_mac_cfg_3 = &priv->ge_mac_cfg_3;
+       s32 max_frame_length;
+
+       ge_mac_cfg_0.value = 0;
+       buf_int_enable.value = 0;
+       /* Enable Rx and Tx statistics */
+       ge_mac_cfg_2->stat_en = NPS_ENET_GE_MAC_CFG_2_STAT_EN;
+
+       /* Discard packets with different MAC address */
+       ge_mac_cfg_2->disc_da = NPS_ENET_ENABLE;
+
+       /* Discard multicast packets */
+       ge_mac_cfg_2->disc_mc = NPS_ENET_ENABLE;
+
+       nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2,
+                        ge_mac_cfg_2->value);
+
+       /* Discard Packets bigger than max frame length */
+       max_frame_length = ETH_HLEN + ndev->mtu + ETH_FCS_LEN;
+       if (max_frame_length <= NPS_ENET_MAX_FRAME_LENGTH) {
+               ge_mac_cfg_3->max_len = max_frame_length;
+               nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_3,
+                                ge_mac_cfg_3->value);
+       }
+
+       /* Enable interrupts */
+       buf_int_enable.rx_rdy = NPS_ENET_ENABLE;
+       buf_int_enable.tx_done = NPS_ENET_ENABLE;
+       nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE,
+                        buf_int_enable.value);
+
+       /* Write device MAC address to HW */
+       nps_enet_set_hw_mac_address(ndev);
+
+       /* Rx and Tx HW features */
+       ge_mac_cfg_0.tx_pad_en = NPS_ENET_ENABLE;
+       ge_mac_cfg_0.tx_crc_en = NPS_ENET_ENABLE;
+       ge_mac_cfg_0.rx_crc_strip = NPS_ENET_ENABLE;
+
+       /* IFG configuration */
+       ge_mac_cfg_0.rx_ifg = NPS_ENET_GE_MAC_CFG_0_RX_IFG;
+       ge_mac_cfg_0.tx_ifg = NPS_ENET_GE_MAC_CFG_0_TX_IFG;
+
+       /* preamble configuration */
+       ge_mac_cfg_0.rx_pr_check_en = NPS_ENET_ENABLE;
+       ge_mac_cfg_0.tx_pr_len = NPS_ENET_GE_MAC_CFG_0_TX_PR_LEN;
+
+       /* enable flow control frames */
+       ge_mac_cfg_0.tx_fc_en = NPS_ENET_ENABLE;
+       ge_mac_cfg_0.rx_fc_en = NPS_ENET_ENABLE;
+       ge_mac_cfg_0.tx_fc_retr = NPS_ENET_GE_MAC_CFG_0_TX_FC_RETR;
+
+       /* Enable Rx and Tx */
+       ge_mac_cfg_0.rx_en = NPS_ENET_ENABLE;
+       ge_mac_cfg_0.tx_en = NPS_ENET_ENABLE;
+
+       nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0,
+                        ge_mac_cfg_0.value);
+}
+
+static void nps_enet_hw_disable_control(struct net_device *ndev)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+
+       /* Disable interrupts */
+       nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0);
+
+       /* Disable Rx and Tx */
+       nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0, 0);
+}
+
+static void nps_enet_send_frame(struct net_device *ndev,
+                               struct sk_buff *skb)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       struct nps_enet_tx_ctl tx_ctrl;
+       short length = skb->len;
+       u32 i, len = DIV_ROUND_UP(length, sizeof(u32));
+       u32 *src = (u32 *)virt_to_phys(skb->data);
+       bool src_is_aligned = IS_ALIGNED((unsigned long)src, sizeof(u32));
+
+       tx_ctrl.value = 0;
+       /* In case src is not aligned we need an intermediate buffer */
+       if (src_is_aligned)
+               for (i = 0; i < len; i++, src++)
+                       nps_enet_reg_set(priv, NPS_ENET_REG_TX_BUF, *src);
+       else { /* !src_is_aligned */
+               for (i = 0; i < len; i++, src++) {
+                       u32 buf;
+
+                       /* to accommodate word-unaligned address of "src"
+                        * we have to do memcpy_fromio() instead of simple "="
+                        */
+                       memcpy_fromio(&buf, (void __iomem *)src, sizeof(buf));
+                       nps_enet_reg_set(priv, NPS_ENET_REG_TX_BUF, buf);
+               }
+       }
+       /* Write the length of the Frame */
+       tx_ctrl.nt = length;
+
+       /* Indicate SW is done */
+       priv->tx_packet_sent = true;
+       tx_ctrl.ct = NPS_ENET_ENABLE;
+
+       /* Send Frame */
+       nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, tx_ctrl.value);
+}
+
+/**
+ * nps_enet_set_mac_address - Set the MAC address for this device.
+ * @ndev:       Pointer to net_device structure.
+ * @p:          6 byte Address to be written as MAC address.
+ *
+ * This function copies the HW address from the sockaddr structure to the
+ * net_device structure and updates the address in HW.
+ *
+ * returns:     -EBUSY if the net device is busy or 0 if the address is set
+ *              successfully.
+ */
+static s32 nps_enet_set_mac_address(struct net_device *ndev, void *p)
+{
+       struct sockaddr *addr = p;
+       s32 res;
+
+       if (netif_running(ndev))
+               return -EBUSY;
+
+       res = eth_mac_addr(ndev, p);
+       if (!res) {
+               ether_addr_copy(ndev->dev_addr, addr->sa_data);
+               nps_enet_set_hw_mac_address(ndev);
+       }
+
+       return res;
+}
+
+/**
+ * nps_enet_set_rx_mode - Change the receive filtering mode.
+ * @ndev:       Pointer to the network device.
+ *
+ * This function enables/disables promiscuous mode
+ */
+static void nps_enet_set_rx_mode(struct net_device *ndev)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       struct nps_enet_ge_mac_cfg_2 ge_mac_cfg_2;
+
+       ge_mac_cfg_2.value = priv->ge_mac_cfg_2.value;
+
+       if (ndev->flags & IFF_PROMISC) {
+               ge_mac_cfg_2.disc_da = NPS_ENET_DISABLE;
+               ge_mac_cfg_2.disc_mc = NPS_ENET_DISABLE;
+       } else {
+               ge_mac_cfg_2.disc_da = NPS_ENET_ENABLE;
+               ge_mac_cfg_2.disc_mc = NPS_ENET_ENABLE;
+       }
+
+       nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, ge_mac_cfg_2.value);
+}
+
+/**
+ * nps_enet_open - Open the network device.
+ * @ndev:       Pointer to the network device.
+ *
+ * returns: 0, on success or non-zero error value on failure.
+ *
+ * This function sets the MAC address, requests and enables an IRQ
+ * for the ENET device and starts the Tx queue.
+ */
+static s32 nps_enet_open(struct net_device *ndev)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+       s32 err;
+
+       /* Reset private variables */
+       priv->tx_packet_sent = false;
+       priv->ge_mac_cfg_2.value = 0;
+       priv->ge_mac_cfg_3.value = 0;
+
+       /* ge_mac_cfg_3 default values */
+       priv->ge_mac_cfg_3.rx_ifg_th = NPS_ENET_GE_MAC_CFG_3_RX_IFG_TH;
+       priv->ge_mac_cfg_3.max_len = NPS_ENET_GE_MAC_CFG_3_MAX_LEN;
+
+       /* Disable HW device */
+       nps_enet_hw_disable_control(ndev);
+
+       /* irq Rx allocation */
+       err = request_irq(priv->irq, nps_enet_irq_handler,
+                         0, "enet-rx-tx", ndev);
+       if (err)
+               return err;
+
+       napi_enable(&priv->napi);
+
+       /* Enable HW device */
+       nps_enet_hw_reset(ndev);
+       nps_enet_hw_enable_control(ndev);
+
+       netif_start_queue(ndev);
+
+       return 0;
+}
+
+/**
+ * nps_enet_stop - Close the network device.
+ * @ndev:       Pointer to the network device.
+ *
+ * This function stops the Tx queue, disables interrupts for the ENET device.
+ */
+static s32 nps_enet_stop(struct net_device *ndev)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+
+       napi_disable(&priv->napi);
+       netif_stop_queue(ndev);
+       nps_enet_hw_disable_control(ndev);
+       free_irq(priv->irq, ndev);
+
+       return 0;
+}
+
+/**
+ * nps_enet_start_xmit - Starts the data transmission.
+ * @skb:        sk_buff pointer that contains data to be Transmitted.
+ * @ndev:       Pointer to net_device structure.
+ *
+ * returns: NETDEV_TX_OK, on success
+ *              NETDEV_TX_BUSY, if any of the descriptors are not free.
+ *
+ * This function is invoked from upper layers to initiate transmission.
+ */
+static netdev_tx_t nps_enet_start_xmit(struct sk_buff *skb,
+                                      struct net_device *ndev)
+{
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+
+       /* This driver handles one frame at a time  */
+       netif_stop_queue(ndev);
+
+       nps_enet_send_frame(ndev, skb);
+
+       priv->tx_skb = skb;
+
+       return NETDEV_TX_OK;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void nps_enet_poll_controller(struct net_device *ndev)
+{
+       disable_irq(ndev->irq);
+       nps_enet_irq_handler(ndev->irq, ndev);
+       enable_irq(ndev->irq);
+}
+#endif
+
+static const struct net_device_ops nps_netdev_ops = {
+       .ndo_open               = nps_enet_open,
+       .ndo_stop               = nps_enet_stop,
+       .ndo_start_xmit         = nps_enet_start_xmit,
+       .ndo_set_mac_address    = nps_enet_set_mac_address,
+       .ndo_set_rx_mode        = nps_enet_set_rx_mode,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+       .ndo_poll_controller    = nps_enet_poll_controller,
+#endif
+};
+
+static s32 nps_enet_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct net_device *ndev;
+       struct nps_enet_priv *priv;
+       s32 err = 0;
+       const char *mac_addr;
+       struct resource *res_regs;
+
+       if (!dev->of_node)
+               return -ENODEV;
+
+       ndev = alloc_etherdev(sizeof(struct nps_enet_priv));
+       if (!ndev)
+               return -ENOMEM;
+
+       platform_set_drvdata(pdev, ndev);
+       SET_NETDEV_DEV(ndev, dev);
+       priv = netdev_priv(ndev);
+
+       /* The EZ NET specific entries in the device structure. */
+       ndev->netdev_ops = &nps_netdev_ops;
+       ndev->watchdog_timeo = (400 * HZ / 1000);
+       /* FIXME :: no multicast support yet */
+       ndev->flags &= ~IFF_MULTICAST;
+
+       res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       priv->regs_base = devm_ioremap_resource(dev, res_regs);
+       if (IS_ERR(priv->regs_base)) {
+               err = PTR_ERR(priv->regs_base);
+               goto out_netdev;
+       }
+       dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs_base);
+
+       /* set kernel MAC address to dev */
+       mac_addr = of_get_mac_address(dev->of_node);
+       if (mac_addr)
+               ether_addr_copy(ndev->dev_addr, mac_addr);
+       else
+               eth_hw_addr_random(ndev);
+
+       /* Get IRQ number */
+       priv->irq = platform_get_irq(pdev, 0);
+       if (!priv->irq) {
+               dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
+               err = -ENODEV;
+               goto out_netdev;
+       }
+
+       netif_napi_add(ndev, &priv->napi, nps_enet_poll,
+                      NPS_ENET_NAPI_POLL_WEIGHT);
+
+       /* Register the driver. Should be the last thing in probe */
+       err = register_netdev(ndev);
+       if (err) {
+               dev_err(dev, "Failed to register ndev for %s, err = 0x%08x\n",
+                       ndev->name, (s32)err);
+               goto out_netif_api;
+       }
+
+       dev_info(dev, "(rx/tx=%d)\n", priv->irq);
+       return 0;
+
+out_netif_api:
+       netif_napi_del(&priv->napi);
+out_netdev:
+       if (err)
+               free_netdev(ndev);
+
+       return err;
+}
+
+static s32 nps_enet_remove(struct platform_device *pdev)
+{
+       struct net_device *ndev = platform_get_drvdata(pdev);
+       struct nps_enet_priv *priv = netdev_priv(ndev);
+
+       unregister_netdev(ndev);
+       free_netdev(ndev);
+       netif_napi_del(&priv->napi);
+
+       return 0;
+}
+
+static const struct of_device_id nps_enet_dt_ids[] = {
+       { .compatible = "ezchip,nps-mgt-enet" },
+       { /* Sentinel */ }
+};
+
+static struct platform_driver nps_enet_driver = {
+       .probe = nps_enet_probe,
+       .remove = nps_enet_remove,
+       .driver = {
+               .name = DRV_NAME,
+               .of_match_table  = nps_enet_dt_ids,
+       },
+};
+
+module_platform_driver(nps_enet_driver);
+
+MODULE_AUTHOR("EZchip Semiconductor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/ezchip/nps_enet.h b/drivers/net/ethernet/ezchip/nps_enet.h
new file mode 100644 (file)
index 0000000..fc45c9d
--- /dev/null
@@ -0,0 +1,336 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef _NPS_ENET_H
+#define _NPS_ENET_H
+
+/* default values */
+#define NPS_ENET_NAPI_POLL_WEIGHT              0x2
+#define NPS_ENET_MAX_FRAME_LENGTH              0x3FFF
+#define NPS_ENET_GE_MAC_CFG_0_TX_FC_RETR       0x7
+#define NPS_ENET_GE_MAC_CFG_0_RX_IFG           0x5
+#define NPS_ENET_GE_MAC_CFG_0_TX_IFG           0xC
+#define NPS_ENET_GE_MAC_CFG_0_TX_PR_LEN                0x7
+#define NPS_ENET_GE_MAC_CFG_2_STAT_EN          0x3
+#define NPS_ENET_GE_MAC_CFG_3_RX_IFG_TH                0x14
+#define NPS_ENET_GE_MAC_CFG_3_MAX_LEN          0x3FFC
+#define NPS_ENET_ENABLE                                1
+#define NPS_ENET_DISABLE                       0
+
+/* register definitions  */
+#define NPS_ENET_REG_TX_CTL            0x800
+#define NPS_ENET_REG_TX_BUF            0x808
+#define NPS_ENET_REG_RX_CTL            0x810
+#define NPS_ENET_REG_RX_BUF            0x818
+#define NPS_ENET_REG_BUF_INT_ENABLE    0x8C0
+#define NPS_ENET_REG_BUF_INT_CAUSE     0x8C4
+#define NPS_ENET_REG_GE_MAC_CFG_0      0x1000
+#define NPS_ENET_REG_GE_MAC_CFG_1      0x1004
+#define NPS_ENET_REG_GE_MAC_CFG_2      0x1008
+#define NPS_ENET_REG_GE_MAC_CFG_3      0x100C
+#define NPS_ENET_REG_GE_RST            0x1400
+#define NPS_ENET_REG_PHASE_FIFO_CTL    0x1404
+
+/* Tx control register */
+struct nps_enet_tx_ctl {
+       union {
+               /* ct: SW sets to indicate frame ready in Tx buffer for
+                *     transmission. HW resets to when transmission done
+                * et: Transmit error
+                * nt: Length in bytes of Tx frame loaded to Tx buffer
+                */
+               struct {
+                       u32
+                       __reserved_1:16,
+                       ct:1,
+                       et:1,
+                       __reserved_2:3,
+                       nt:11;
+               };
+
+               u32 value;
+       };
+};
+
+/* Rx control register */
+struct nps_enet_rx_ctl {
+       union {
+               /* cr:  HW sets to indicate frame ready in Rx buffer.
+                *      SW resets to indicate host read received frame
+                *      and new frames can be written to Rx buffer
+                * er:  Rx error indication
+                * crc: Rx CRC error indication
+                * nr:  Length in bytes of Rx frame loaded by MAC to Rx buffer
+                */
+               struct {
+                       u32
+                       __reserved_1:16,
+                       cr:1,
+                       er:1,
+                       crc:1,
+                       __reserved_2:2,
+                       nr:11;
+               };
+
+               u32 value;
+       };
+};
+
+/* Interrupt enable for data buffer events register */
+struct nps_enet_buf_int_enable {
+       union {
+               /* tx_done: Interrupt generation in the case when new frame
+                *          is ready in Rx buffer
+                * rx_rdy:  Interrupt generation in the case when current frame
+                *          was read from TX buffer
+                */
+               struct {
+                       u32
+                       __reserved:30,
+                       tx_done:1,
+                       rx_rdy:1;
+               };
+
+               u32 value;
+       };
+};
+
+/* Interrupt cause for data buffer events register */
+struct nps_enet_buf_int_cause {
+       union {
+               /* tx_done: Interrupt in the case when current frame was
+                *          read from TX buffer.
+                * rx_rdy:  Interrupt in the case when new frame is ready
+                *          in RX buffer.
+                */
+               struct {
+                       u32
+                       __reserved:30,
+                       tx_done:1,
+                       rx_rdy:1;
+               };
+
+               u32 value;
+       };
+};
+
+/* Gbps Eth MAC Configuration 0 register */
+struct nps_enet_ge_mac_cfg_0 {
+       union {
+               /* tx_pr_len:          Transmit preamble length in bytes
+                * tx_ifg_nib:         Tx idle pattern
+                * nib_mode:           Nibble (4-bit) Mode
+                * rx_pr_check_en:     Receive preamble Check Enable
+                * tx_ifg:             Transmit inter-Frame Gap
+                * rx_ifg:             Receive inter-Frame Gap
+                * tx_fc_retr:         Transmit Flow Control Retransmit Mode
+                * rx_length_check_en: Receive Length Check Enable
+                * rx_crc_ignore:      Results of the CRC check are ignored
+                * rx_crc_strip:       MAC strips the CRC from received frames
+                * rx_fc_en:           Receive Flow Control Enable
+                * tx_crc_en:          Transmit CRC Enabled
+                * tx_pad_en:          Transmit Padding Enable
+                * tx_cf_en:           Transmit Flow Control Enable
+                * tx_en:              Transmit Enable
+                * rx_en:              Receive Enable
+                */
+               struct {
+                       u32
+                       tx_pr_len:4,
+                       tx_ifg_nib:4,
+                       nib_mode:1,
+                       rx_pr_check_en:1,
+                       tx_ifg:6,
+                       rx_ifg:4,
+                       tx_fc_retr:3,
+                       rx_length_check_en:1,
+                       rx_crc_ignore:1,
+                       rx_crc_strip:1,
+                       rx_fc_en:1,
+                       tx_crc_en:1,
+                       tx_pad_en:1,
+                       tx_fc_en:1,
+                       tx_en:1,
+                       rx_en:1;
+               };
+
+               u32 value;
+       };
+};
+
+/* Gbps Eth MAC Configuration 1 register */
+struct nps_enet_ge_mac_cfg_1 {
+       union {
+               /* octet_3: MAC address octet 3
+                * octet_2: MAC address octet 2
+                * octet_1: MAC address octet 1
+                * octet_0: MAC address octet 0
+                */
+               struct {
+                       u32
+                       octet_3:8,
+                       octet_2:8,
+                       octet_1:8,
+                       octet_0:8;
+               };
+
+               u32 value;
+       };
+};
+
+/* Gbps Eth MAC Configuration 2 register */
+struct nps_enet_ge_mac_cfg_2 {
+       union {
+               /* transmit_flush_en: MAC flush enable
+                * stat_en:           RMON statistics interface enable
+                * disc_da:           Discard frames with DA different
+                *                    from MAC address
+                * disc_bc:           Discard broadcast frames
+                * disc_mc:           Discard multicast frames
+                * octet_5:           MAC address octet 5
+                * octet_4:           MAC address octet 4
+                */
+               struct {
+                       u32
+                       transmit_flush_en:1,
+                       __reserved_1:5,
+                       stat_en:2,
+                       __reserved_2:1,
+                       disc_da:1,
+                       disc_bc:1,
+                       disc_mc:1,
+                       __reserved_3:4,
+                       octet_5:8,
+                       octet_4:8;
+               };
+
+               u32 value;
+       };
+};
+
+/* Gbps Eth MAC Configuration 3 register */
+struct nps_enet_ge_mac_cfg_3 {
+       union {
+               /* ext_oob_cbfc_sel:  Selects one of the 4 profiles for
+                *                    extended OOB in-flow-control indication
+                * max_len:           Maximum receive frame length in bytes
+                * tx_cbfc_en:        Enable transmission of class-based
+                *                    flow control packets
+                * rx_ifg_th:         Threshold for IFG status reporting via OOB
+                * cf_timeout:        Configurable time to decrement FC counters
+                * cf_drop:           Drop control frames
+                * redirect_cbfc_sel: Selects one of CBFC redirect profiles
+                * rx_cbfc_redir_en:  Enable Rx class-based flow
+                *                    control redirect
+                * rx_cbfc_en:        Enable Rx class-based flow control
+                * tm_hd_mode:        TM header mode
+                */
+               struct {
+                       u32
+                       ext_oob_cbfc_sel:2,
+                       max_len:14,
+                       tx_cbfc_en:1,
+                       rx_ifg_th:5,
+                       cf_timeout:4,
+                       cf_drop:1,
+                       redirect_cbfc_sel:2,
+                       rx_cbfc_redir_en:1,
+                       rx_cbfc_en:1,
+                       tm_hd_mode:1;
+               };
+
+               u32 value;
+       };
+};
+
+/* GE MAC, PCS reset control register */
+struct nps_enet_ge_rst {
+       union {
+               /* gmac_0: GE MAC reset
+                * spcs_0: SGMII PCS reset
+                */
+               struct {
+                       u32
+                       __reserved_1:23,
+                       gmac_0:1,
+                       __reserved_2:7,
+                       spcs_0:1;
+               };
+
+               u32 value;
+       };
+};
+
+/* Tx phase sync FIFO control register */
+struct nps_enet_phase_fifo_ctl {
+       union {
+               /* init: initialize serdes TX phase sync FIFO pointers
+                * rst:  reset serdes TX phase sync FIFO
+                */
+               struct {
+                       u32
+                       __reserved:30,
+                       init:1,
+                       rst:1;
+               };
+
+               u32 value;
+       };
+};
+
+/**
+ * struct nps_enet_priv - Storage of ENET's private information.
+ * @regs_base:      Base address of ENET memory-mapped control registers.
+ * @irq:            For RX/TX IRQ number.
+ * @tx_packet_sent: SW indication if frame is being sent.
+ * @tx_skb:         socket buffer of sent frame.
+ * @napi:           Structure for NAPI.
+ */
+struct nps_enet_priv {
+       void __iomem *regs_base;
+       s32 irq;
+       bool tx_packet_sent;
+       struct sk_buff *tx_skb;
+       struct napi_struct napi;
+       struct nps_enet_ge_mac_cfg_2 ge_mac_cfg_2;
+       struct nps_enet_ge_mac_cfg_3 ge_mac_cfg_3;
+};
+
+/**
+ * nps_reg_set - Sets ENET register with provided value.
+ * @priv:       Pointer to EZchip ENET private data structure.
+ * @reg:        Register offset from base address.
+ * @value:      Value to set in register.
+ */
+static inline void nps_enet_reg_set(struct nps_enet_priv *priv,
+                                   s32 reg, s32 value)
+{
+       iowrite32be(value, priv->regs_base + reg);
+}
+
+/**
+ * nps_reg_get - Gets value of specified ENET register.
+ * @priv:       Pointer to EZchip ENET private data structure.
+ * @reg:        Register offset from base address.
+ *
+ * returns:     Value of requested register.
+ */
+static inline u32 nps_enet_reg_get(struct nps_enet_priv *priv, s32 reg)
+{
+       return ioread32be(priv->regs_base + reg);
+}
+
+#endif /* _NPS_ENET_H */