arm64: dts: qcom: pm8005: add gpio-ranges

This adds the gpio-ranges property so that the GPIO pins are initialized
by the GPIO framework and not pinctrl. This fixes a circular dependency
between these two frameworks so GPIO hogging can be used on this board.

This was not tested on this particular hardware, however this same
change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <agross@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
index c0ddf128136cc9ab34e99201fb0cf5abd807088e..3f97607d8baa89ab1e16a0044c4feacf187bde46 100644 (file)
--- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -15,6 +15,7 @@ pm8005_gpio: gpios@c000 {
                        compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
                        reg = <0xc000>;
                        gpio-controller;
+                       gpio-ranges = <&pm8005_gpio 0 0 4>;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupt-cells = <2>;