help
Say Y when you want to support this frontend.
+comment "Common Interface (EN50221) controller drivers"
+ depends on DVB_CORE
+
+config DVB_CXD2099
+ tristate "CXD2099AR Common Interface driver"
+ depends on DVB_CORE && I2C
+ ---help---
+ A driver for the CI controller currently found mostly on
+ Digital Devices DuoFlex CI (single) addon modules.
+
+ Say Y when you want to support these devices.
+
comment "Tools to develop new frontends"
config DVB_DUMMY_FE
obj-$(CONFIG_DVB_ASCOT2E) += ascot2e.o
obj-$(CONFIG_DVB_HELENE) += helene.o
obj-$(CONFIG_DVB_ZD1301_DEMOD) += zd1301_demod.o
+obj-$(CONFIG_DVB_CXD2099) += cxd2099.o
select DVB_LNBH25 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT
select DVB_MXL5XX if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CXD2099 if MEDIA_SUBDRV_AUTOSELECT
---help---
Support for cards with the Digital Devices PCI express bridge:
- Octopus PCIe Bridge
ccflags-y += -Idrivers/media/dvb-frontends/
ccflags-y += -Idrivers/media/tuners/
-
-# For the staging CI driver cxd2099
-ccflags-y += -Idrivers/staging/media/cxd2099/
select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CXD2099 if MEDIA_SUBDRV_AUTOSELECT
---help---
Support for Micronas PCI express cards with nGene bridge.
ccflags-y += -Idrivers/media/dvb-frontends/
ccflags-y += -Idrivers/media/tuners/
-
-# For the staging CI driver cxd2099
-ccflags-y += -Idrivers/staging/media/cxd2099/
source "drivers/staging/media/bcm2048/Kconfig"
-source "drivers/staging/media/cxd2099/Kconfig"
-
source "drivers/staging/media/davinci_vpfe/Kconfig"
source "drivers/staging/media/imx/Kconfig"
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_I2C_BCM2048) += bcm2048/
-obj-$(CONFIG_DVB_CXD2099) += cxd2099/
obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx/
obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074/
obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031/
+++ /dev/null
-config DVB_CXD2099
- tristate "CXD2099AR Common Interface driver"
- depends on DVB_CORE && PCI && I2C
- ---help---
- Support for the CI module found on cards based on
- - Micronas ngene PCIe bridge: cineS2 etc.
- - Digital Devices PCIe bridge: Octopus series
-
- For now, data is passed through '/dev/dvb/adapterX/sec0':
- - Encrypted data must be written to 'sec0'.
- - Decrypted data can be read from 'sec0'.
- - Setup the CAM using device 'ca0'.
+++ /dev/null
-obj-$(CONFIG_DVB_CXD2099) += cxd2099.o
-
-ccflags-y += -Idrivers/media/dvb-frontends/
-ccflags-y += -Idrivers/media/tuners/
+++ /dev/null
-For now, data is passed through '/dev/dvb/adapterX/sec0':
- - Encrypted data must be written to 'sec0'.
- - Decrypted data can be read from 'sec0'.
- - Setup the CAM using device 'ca0'.
-
-But this is wrong. There are some discussions about the proper way for
-doing it, as seen at:
- http://www.mail-archive.com/linux-media@vger.kernel.org/msg22196.html
-
-While there's no proper fix for it, the driver should be kept in staging.
-
-Patches should be submitted to: linux-media@vger.kernel.org.