arm: zynq: Use i2c-mux instead of i2cswitch for pca9548

i2c muxes should described like this.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 70a5de76b7db36a858a48cb82c2fd1e7fd94e95e..ff3a7d22afbaa958d98b269cfdb2d70257d52424 100644 (file)
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -112,7 +112,7 @@ &i2c0 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c0_default>;
 
-       i2cswitch@74 {
+       i2c-mux@74 {
                compatible = "nxp,pca9548";
                #address-cells = <1>;
                #size-cells = <0>;

diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index cdc326ec333586da5650dd1894f07c2e64a80525..1825f5722ab9582eabebcf3dae4546248fe7d978 100644 (file)
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -68,7 +68,7 @@ &i2c0 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c0_default>;
 
-       i2cswitch@74 {
+       i2c-mux@74 {
                compatible = "nxp,pca9548";
                #address-cells = <1>;
                #size-cells = <0>;