ARM: davinci: dm365: define gpio interrupts as separate resources

Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous
IRQ numbering") the davinci GPIO driver fails to probe if we boot
in legacy mode from any of the board files. Since the driver now
expects every interrupt to be defined as a separate resource, split
the definition of IRQ resources instead of having a single continuous
interrupt range.

Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index abcf2a5ed89b5e4780430911b1ef584711cf0142..42665914166a318e50fd741c60cea0a7c6e9a8a0 100644 (file)
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -267,6 +267,41 @@ static struct resource dm365_gpio_resources[] = {
        },
        {       /* interrupt */
                .start  = IRQ_DM365_GPIO0,
+               .end    = IRQ_DM365_GPIO0,
+               .flags  = IORESOURCE_IRQ,
+       },
+       {
+               .start  = IRQ_DM365_GPIO1,
+               .end    = IRQ_DM365_GPIO1,
+               .flags  = IORESOURCE_IRQ,
+       },
+       {
+               .start  = IRQ_DM365_GPIO2,
+               .end    = IRQ_DM365_GPIO2,
+               .flags  = IORESOURCE_IRQ,
+       },
+       {
+               .start  = IRQ_DM365_GPIO3,
+               .end    = IRQ_DM365_GPIO3,
+               .flags  = IORESOURCE_IRQ,
+       },
+       {
+               .start  = IRQ_DM365_GPIO4,
+               .end    = IRQ_DM365_GPIO4,
+               .flags  = IORESOURCE_IRQ,
+       },
+       {
+               .start  = IRQ_DM365_GPIO5,
+               .end    = IRQ_DM365_GPIO5,
+               .flags  = IORESOURCE_IRQ,
+       },
+       {
+               .start  = IRQ_DM365_GPIO6,
+               .end    = IRQ_DM365_GPIO6,
+               .flags  = IORESOURCE_IRQ,
+       },
+       {
+               .start  = IRQ_DM365_GPIO7,
                .end    = IRQ_DM365_GPIO7,
                .flags  = IORESOURCE_IRQ,
        },