#define ARMADA_37XX_DVFS_LOAD_2 2
#define ARMADA_37XX_DVFS_LOAD_3 3
+/* AVS register set */
+#define ARMADA_37XX_AVS_CTL0 0x0
+#define ARMADA_37XX_AVS_ENABLE BIT(30)
+#define ARMADA_37XX_AVS_HIGH_VDD_LIMIT 16
+#define ARMADA_37XX_AVS_LOW_VDD_LIMIT 22
+#define ARMADA_37XX_AVS_VDD_MASK 0x3F
+#define ARMADA_37XX_AVS_CTL2 0x8
+#define ARMADA_37XX_AVS_LOW_VDD_EN BIT(6)
+#define ARMADA_37XX_AVS_VSET(x) (0x1C + 4 * (x))
+
/*
* On Armada 37xx the Power management manages 4 level of CPU load,
* each level can be associated with a CPU clock source, a CPU
*/
#define LOAD_LEVEL_NR 4
+#define MIN_VOLT_MV 1000
+
+/* AVS value for the corresponding voltage (in mV) */
+static int avs_map[] = {
+ 747, 758, 770, 782, 793, 805, 817, 828, 840, 852, 863, 875, 887, 898,
+ 910, 922, 933, 945, 957, 968, 980, 992, 1003, 1015, 1027, 1038, 1050,
+ 1062, 1073, 1085, 1097, 1108, 1120, 1132, 1143, 1155, 1167, 1178, 1190,
+ 1202, 1213, 1225, 1237, 1248, 1260, 1272, 1283, 1295, 1307, 1318, 1330,
+ 1342
+};
+
struct armada37xx_cpufreq_state {
struct regmap *regmap;
u32 nb_l0l1;
struct armada_37xx_dvfs {
u32 cpu_freq_max;
u8 divider[LOAD_LEVEL_NR];
+ u32 avs[LOAD_LEVEL_NR];
};
static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
clk_set_parent(clk, parent);
}
+/*
+ * Find out the armada 37x supported AVS value whose voltage value is
+ * the round-up closest to the target voltage value.
+ */
+static u32 armada_37xx_avs_val_match(int target_vm)
+{
+ u32 avs;
+
+ /* Find out the round-up closest supported voltage value */
+ for (avs = 0; avs < ARRAY_SIZE(avs_map); avs++)
+ if (avs_map[avs] >= target_vm)
+ break;
+
+ /*
+ * If all supported voltages are smaller than target one,
+ * choose the largest supported voltage
+ */
+ if (avs == ARRAY_SIZE(avs_map))
+ avs = ARRAY_SIZE(avs_map) - 1;
+
+ return avs;
+}
+
+/*
+ * For Armada 37xx soc, L0(VSET0) VDD AVS value is set to SVC revision
+ * value or a default value when SVC is not supported.
+ * - L0 can be read out from the register of AVS_CTRL_0 and L0 voltage
+ * can be got from the mapping table of avs_map.
+ * - L1 voltage should be about 100mv smaller than L0 voltage
+ * - L2 & L3 voltage should be about 150mv smaller than L0 voltage.
+ * This function calculates L1 & L2 & L3 AVS values dynamically based
+ * on L0 voltage and fill all AVS values to the AVS value table.
+ */
+static void __init armada37xx_cpufreq_avs_configure(struct regmap *base,
+ struct armada_37xx_dvfs *dvfs)
+{
+ unsigned int target_vm;
+ int load_level = 0;
+ u32 l0_vdd_min;
+
+ if (base == NULL)
+ return;
+
+ /* Get L0 VDD min value */
+ regmap_read(base, ARMADA_37XX_AVS_CTL0, &l0_vdd_min);
+ l0_vdd_min = (l0_vdd_min >> ARMADA_37XX_AVS_LOW_VDD_LIMIT) &
+ ARMADA_37XX_AVS_VDD_MASK;
+ if (l0_vdd_min >= ARRAY_SIZE(avs_map)) {
+ pr_err("L0 VDD MIN %d is not correct.\n", l0_vdd_min);
+ return;
+ }
+ dvfs->avs[0] = l0_vdd_min;
+
+ if (avs_map[l0_vdd_min] <= MIN_VOLT_MV) {
+ /*
+ * If L0 voltage is smaller than 1000mv, then all VDD sets
+ * use L0 voltage;
+ */
+ u32 avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV);
+
+ for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++)
+ dvfs->avs[load_level] = avs_min;
+
+ return;
+ }
+
+ /*
+ * L1 voltage is equal to L0 voltage - 100mv and it must be
+ * larger than 1000mv
+ */
+
+ target_vm = avs_map[l0_vdd_min] - 100;
+ target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV;
+ dvfs->avs[1] = armada_37xx_avs_val_match(target_vm);
+
+ /*
+ * L2 & L3 voltage is equal to L0 voltage - 150mv and it must
+ * be larger than 1000mv
+ */
+ target_vm = avs_map[l0_vdd_min] - 150;
+ target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV;
+ dvfs->avs[2] = dvfs->avs[3] = armada_37xx_avs_val_match(target_vm);
+}
+
+static void __init armada37xx_cpufreq_avs_setup(struct regmap *base,
+ struct armada_37xx_dvfs *dvfs)
+{
+ unsigned int avs_val = 0, freq;
+ int load_level = 0;
+
+ if (base == NULL)
+ return;
+
+ /* Disable AVS before the configuration */
+ regmap_update_bits(base, ARMADA_37XX_AVS_CTL0,
+ ARMADA_37XX_AVS_ENABLE, 0);
+
+
+ /* Enable low voltage mode */
+ regmap_update_bits(base, ARMADA_37XX_AVS_CTL2,
+ ARMADA_37XX_AVS_LOW_VDD_EN,
+ ARMADA_37XX_AVS_LOW_VDD_EN);
+
+
+ for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++) {
+ freq = dvfs->cpu_freq_max / dvfs->divider[load_level];
+
+ avs_val = dvfs->avs[load_level];
+ regmap_update_bits(base, ARMADA_37XX_AVS_VSET(load_level-1),
+ ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_HIGH_VDD_LIMIT |
+ ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_LOW_VDD_LIMIT,
+ avs_val << ARMADA_37XX_AVS_HIGH_VDD_LIMIT |
+ avs_val << ARMADA_37XX_AVS_LOW_VDD_LIMIT);
+ }
+
+ /* Enable AVS after the configuration */
+ regmap_update_bits(base, ARMADA_37XX_AVS_CTL0,
+ ARMADA_37XX_AVS_ENABLE,
+ ARMADA_37XX_AVS_ENABLE);
+
+}
+
static void armada37xx_cpufreq_disable_dvfs(struct regmap *base)
{
unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
struct platform_device *pdev;
unsigned long freq;
unsigned int cur_frequency;
- struct regmap *nb_pm_base;
+ struct regmap *nb_pm_base, *avs_base;
struct device *cpu_dev;
int load_lvl, ret;
struct clk *clk;
if (IS_ERR(nb_pm_base))
return -ENODEV;
+ avs_base =
+ syscon_regmap_lookup_by_compatible("marvell,armada-3700-avs");
+
+ /* if AVS is not present don't use it but still try to setup dvfs */
+ if (IS_ERR(avs_base)) {
+ pr_info("Syscon failed for Adapting Voltage Scaling: skip it\n");
+ avs_base = NULL;
+ }
/* Before doing any configuration on the DVFS first, disable it */
armada37xx_cpufreq_disable_dvfs(nb_pm_base);
armada37xx_cpufreq_state->regmap = nb_pm_base;
+ armada37xx_cpufreq_avs_configure(avs_base, dvfs);
+ armada37xx_cpufreq_avs_setup(avs_base, dvfs);
+
armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
clk_put(clk);
for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
load_lvl++) {
+ unsigned long u_volt = avs_map[dvfs->avs[load_lvl]] * 1000;
freq = cur_frequency / dvfs->divider[load_lvl];
-
- ret = dev_pm_opp_add(cpu_dev, freq, 0);
+ ret = dev_pm_opp_add(cpu_dev, freq, u_volt);
if (ret)
goto remove_opp;
+
+
}
/* Now that everything is setup, enable the DVFS at hardware level */
projects / linux.git / commitdiff