"bosch,bme280"
Optional properties:
- - chip-id: configurable chip id for non-default chip revisions
- - temp-measurement-period: temperature measurement period (milliseconds)
- - default-oversampling: default oversampling value to be used at startup,
- value range is 0-3 with rising sensitivity.
-- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ
- reset-gpios: a GPIO line handling reset of the sensor: as the line is
active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
F: drivers/net/ethernet/amd/xgbe/
F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
-AMS (Apple Motion Sensor) DRIVER
-M: Michael Hanselmann <linux-kernel@hansmi.ch>
+ANALOG DEVICES INC AD5686 DRIVER
+M: Stefan Popa <stefan.popa@analog.com>
+L: linux-pm@vger.kernel.org
+W: http://ez.analog.com/community/linux-device-drivers
S: Supported
-F: drivers/macintosh/ams/
+F: drivers/iio/dac/ad5686*
+F: drivers/iio/dac/ad5696*
-ANALOG DEVICES INC AD5686 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
-L: linux-pm@vger.kernel.org
-W: http://ez.analog.com/community/linux-device-drivers
-S: Supported
-F: drivers/iio/dac/ad5686*
-F: drivers/iio/dac/ad5696*
-
+ ANALOG DEVICES INC AD5758 DRIVER
+ M: Stefan Popa <stefan.popa@analog.com>
+ L: linux-iio@vger.kernel.org
+ W: http://ez.analog.com/community/linux-device-drivers
+ S: Supported
+ F: drivers/iio/dac/ad5758.c
+ F: Documentation/devicetree/bindings/iio/dac/ad5758.txt
+
ANALOG DEVICES INC AD9389B DRIVER
M: Hans Verkuil <hans.verkuil@cisco.com>
L: linux-media@vger.kernel.org