/*
- * MFD core driver for Rockchip RK808
+ * MFD core driver for Rockchip RK808/RK818
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
#include <linux/mfd/rk808.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/regmap.h>
struct rk808_reg_data {
return false;
}
+static const struct regmap_config rk818_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK818_USB_CTRL_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = rk808_is_volatile_reg,
+};
+
static const struct regmap_config rk808_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
{
.name = "rk808-rtc",
.num_resources = ARRAY_SIZE(rtc_resources),
- .resources = &rtc_resources[0],
+ .resources = rtc_resources,
},
};
-static const struct rk808_reg_data pre_init_reg[] = {
+static const struct mfd_cell rk818s[] = {
+ { .name = "rk808-clkout", },
+ { .name = "rk808-regulator", },
+ {
+ .name = "rk808-rtc",
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resources = rtc_resources,
+ },
+};
+
+static const struct rk808_reg_data rk808_pre_init_reg[] = {
{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
{ RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
VB_LO_SEL_3500MV },
};
+static const struct rk808_reg_data rk818_pre_init_reg[] = {
+ /* improve efficiency */
+ { RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_250MA },
+ { RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_250MA },
+ { RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
+ { RK818_USB_CTRL_REG, RK818_USB_ILIM_SEL_MASK,
+ RK818_USB_ILMIN_2000MA },
+ /* close charger when usb lower then 3.4V */
+ { RK818_USB_CTRL_REG, RK818_USB_CHG_SD_VSEL_MASK,
+ (0x7 << 4) },
+ /* no action when vref */
+ { RK818_H5V_EN_REG, BIT(1), RK818_REF_RDY_CTRL },
+ /* enable HDMI 5V */
+ { RK818_H5V_EN_REG, BIT(0), RK818_H5V_EN },
+ { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT |
+ VB_LO_SEL_3500MV },
+};
+
static const struct regmap_irq rk808_irqs[] = {
/* INT_STS */
[RK808_IRQ_VOUT_LO] = {
},
};
+static const struct regmap_irq rk818_irqs[] = {
+ /* INT_STS */
+ [RK818_IRQ_VOUT_LO] = {
+ .mask = RK818_IRQ_VOUT_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_VB_LO] = {
+ .mask = RK818_IRQ_VB_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_PWRON] = {
+ .mask = RK818_IRQ_PWRON_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_PWRON_LP] = {
+ .mask = RK818_IRQ_PWRON_LP_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_HOTDIE] = {
+ .mask = RK818_IRQ_HOTDIE_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_RTC_ALARM] = {
+ .mask = RK818_IRQ_RTC_ALARM_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_RTC_PERIOD] = {
+ .mask = RK818_IRQ_RTC_PERIOD_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_USB_OV] = {
+ .mask = RK818_IRQ_USB_OV_MSK,
+ .reg_offset = 0,
+ },
+
+ /* INT_STS2 */
+ [RK818_IRQ_PLUG_IN] = {
+ .mask = RK818_IRQ_PLUG_IN_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_PLUG_OUT] = {
+ .mask = RK818_IRQ_PLUG_OUT_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_OK] = {
+ .mask = RK818_IRQ_CHG_OK_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_TE] = {
+ .mask = RK818_IRQ_CHG_TE_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_TS1] = {
+ .mask = RK818_IRQ_CHG_TS1_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_TS2] = {
+ .mask = RK818_IRQ_TS2_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_CVTLIM] = {
+ .mask = RK818_IRQ_CHG_CVTLIM_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_DISCHG_ILIM] = {
+ .mask = RK818_IRQ_DISCHG_ILIM_MSK,
+ .reg_offset = 1,
+ },
+};
+
static struct regmap_irq_chip rk808_irq_chip = {
.name = "rk808",
.irqs = rk808_irqs,
.init_ack_masked = true,
};
+static struct regmap_irq_chip rk818_irq_chip = {
+ .name = "rk818",
+ .irqs = rk818_irqs,
+ .num_irqs = ARRAY_SIZE(rk818_irqs),
+ .num_regs = 2,
+ .irq_reg_stride = 2,
+ .status_base = RK818_INT_STS_REG1,
+ .mask_base = RK818_INT_STS_MSK_REG1,
+ .ack_base = RK818_INT_STS_REG1,
+ .init_ack_masked = true,
+};
+
static struct i2c_client *rk808_i2c_client;
static void rk808_device_shutdown(void)
{
dev_err(&rk808_i2c_client->dev, "power off error!\n");
}
+static const struct of_device_id rk808_of_match[] = {
+ { .compatible = "rockchip,rk808" },
+ { .compatible = "rockchip,rk818" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rk808_of_match);
+
static int rk808_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device_node *np = client->dev.of_node;
struct rk808 *rk808;
+ const struct rk808_reg_data *pre_init_reg;
+ const struct mfd_cell *cells;
+ int nr_pre_init_regs;
+ int nr_cells;
int pm_off = 0;
int ret;
int i;
- if (!client->irq) {
- dev_err(&client->dev, "No interrupt support, no core IRQ\n");
- return -EINVAL;
- }
-
rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
if (!rk808)
return -ENOMEM;
- rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
+ rk808->variant = i2c_smbus_read_word_data(client, RK808_ID_MSB);
+ if (rk808->variant < 0) {
+ dev_err(&client->dev, "Failed to read the chip id at 0x%02x\n",
+ RK808_ID_MSB);
+ return rk808->variant;
+ }
+
+ dev_dbg(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
+
+ switch (rk808->variant) {
+ case RK808_ID:
+ rk808->regmap_cfg = &rk808_regmap_config;
+ rk808->regmap_irq_chip = &rk808_irq_chip;
+ pre_init_reg = rk808_pre_init_reg;
+ nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
+ cells = rk808s;
+ nr_cells = ARRAY_SIZE(rk808s);
+ break;
+ case RK818_ID:
+ rk808->regmap_cfg = &rk818_regmap_config;
+ rk808->regmap_irq_chip = &rk818_irq_chip;
+ pre_init_reg = rk818_pre_init_reg;
+ nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
+ cells = rk818s;
+ nr_cells = ARRAY_SIZE(rk818s);
+ break;
+ default:
+ dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
+ rk808->variant);
+ return -EINVAL;
+ }
+
+ rk808->i2c = client;
+ i2c_set_clientdata(client, rk808);
+
+ rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
if (IS_ERR(rk808->regmap)) {
dev_err(&client->dev, "regmap initialization failed\n");
return PTR_ERR(rk808->regmap);
}
- for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) {
- ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr,
- pre_init_reg[i].mask,
- pre_init_reg[i].value);
- if (ret) {
- dev_err(&client->dev,
- "0x%x write err\n", pre_init_reg[i].addr);
- return ret;
- }
+ if (!client->irq) {
+ dev_err(&client->dev, "No interrupt support, no core IRQ\n");
+ return -EINVAL;
}
ret = regmap_add_irq_chip(rk808->regmap, client->irq,
IRQF_ONESHOT, -1,
- &rk808_irq_chip, &rk808->irq_data);
+ rk808->regmap_irq_chip, &rk808->irq_data);
if (ret) {
dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
return ret;
}
- rk808->i2c = client;
- i2c_set_clientdata(client, rk808);
+ for (i = 0; i < nr_pre_init_regs; i++) {
+ ret = regmap_update_bits(rk808->regmap,
+ pre_init_reg[i].addr,
+ pre_init_reg[i].mask,
+ pre_init_reg[i].value);
+ if (ret) {
+ dev_err(&client->dev,
+ "0x%x write err\n",
+ pre_init_reg[i].addr);
+ return ret;
+ }
+ }
- ret = devm_mfd_add_devices(&client->dev, -1,
- rk808s, ARRAY_SIZE(rk808s), NULL, 0,
- regmap_irq_get_domain(rk808->irq_data));
+ ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+ cells, nr_cells, NULL, 0,
+ regmap_irq_get_domain(rk808->irq_data));
if (ret) {
dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
goto err_irq;
return 0;
}
-static const struct of_device_id rk808_of_match[] = {
- { .compatible = "rockchip,rk808" },
- { },
-};
-MODULE_DEVICE_TABLE(of, rk808_of_match);
-
static const struct i2c_device_id rk808_ids[] = {
{ "rk808" },
+ { "rk818" },
{ },
};
MODULE_DEVICE_TABLE(i2c, rk808_ids);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
-MODULE_DESCRIPTION("RK808 PMIC driver");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
+MODULE_DESCRIPTION("RK808/RK818 PMIC driver");
/*
- * rk808.h for Rockchip RK808
+ * Register definitions for Rockchip's RK808/RK818 PMIC
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
* more details.
*/
-#ifndef __LINUX_REGULATOR_rk808_H
-#define __LINUX_REGULATOR_rk808_H
+#ifndef __LINUX_REGULATOR_RK808_H
+#define __LINUX_REGULATOR_RK808_H
#include <linux/regulator/machine.h>
#include <linux/regmap.h>
#define RK808_DCDC1 0 /* (0+RK808_START) */
#define RK808_LDO1 4 /* (4+RK808_START) */
-#define RK808_NUM_REGULATORS 14
+#define RK808_NUM_REGULATORS 14
enum rk808_reg {
RK808_ID_DCDC1,
#define RK808_RTC_INT_REG 0x12
#define RK808_RTC_COMP_LSB_REG 0x13
#define RK808_RTC_COMP_MSB_REG 0x14
+#define RK808_ID_MSB 0x17
+#define RK808_ID_LSB 0x18
#define RK808_CLK32OUT_REG 0x20
#define RK808_VB_MON_REG 0x21
#define RK808_THERMAL_REG 0x22
#define RK808_INT_STS_MSK_REG2 0x4f
#define RK808_IO_POL_REG 0x50
-/* IRQ Definitions */
+/* RK818 */
+#define RK818_DCDC1 0
+#define RK818_LDO1 4
+#define RK818_NUM_REGULATORS 17
+
+enum rk818_reg {
+ RK818_ID_DCDC1,
+ RK818_ID_DCDC2,
+ RK818_ID_DCDC3,
+ RK818_ID_DCDC4,
+ RK818_ID_BOOST,
+ RK818_ID_LDO1,
+ RK818_ID_LDO2,
+ RK818_ID_LDO3,
+ RK818_ID_LDO4,
+ RK818_ID_LDO5,
+ RK818_ID_LDO6,
+ RK818_ID_LDO7,
+ RK818_ID_LDO8,
+ RK818_ID_LDO9,
+ RK818_ID_SWITCH,
+ RK818_ID_HDMI_SWITCH,
+ RK818_ID_OTG_SWITCH,
+};
+
+#define RK818_DCDC_EN_REG 0x23
+#define RK818_LDO_EN_REG 0x24
+#define RK818_SLEEP_SET_OFF_REG1 0x25
+#define RK818_SLEEP_SET_OFF_REG2 0x26
+#define RK818_DCDC_UV_STS_REG 0x27
+#define RK818_DCDC_UV_ACT_REG 0x28
+#define RK818_LDO_UV_STS_REG 0x29
+#define RK818_LDO_UV_ACT_REG 0x2a
+#define RK818_DCDC_PG_REG 0x2b
+#define RK818_LDO_PG_REG 0x2c
+#define RK818_VOUT_MON_TDB_REG 0x2d
+#define RK818_BUCK1_CONFIG_REG 0x2e
+#define RK818_BUCK1_ON_VSEL_REG 0x2f
+#define RK818_BUCK1_SLP_VSEL_REG 0x30
+#define RK818_BUCK2_CONFIG_REG 0x32
+#define RK818_BUCK2_ON_VSEL_REG 0x33
+#define RK818_BUCK2_SLP_VSEL_REG 0x34
+#define RK818_BUCK3_CONFIG_REG 0x36
+#define RK818_BUCK4_CONFIG_REG 0x37
+#define RK818_BUCK4_ON_VSEL_REG 0x38
+#define RK818_BUCK4_SLP_VSEL_REG 0x39
+#define RK818_BOOST_CONFIG_REG 0x3a
+#define RK818_LDO1_ON_VSEL_REG 0x3b
+#define RK818_LDO1_SLP_VSEL_REG 0x3c
+#define RK818_LDO2_ON_VSEL_REG 0x3d
+#define RK818_LDO2_SLP_VSEL_REG 0x3e
+#define RK818_LDO3_ON_VSEL_REG 0x3f
+#define RK818_LDO3_SLP_VSEL_REG 0x40
+#define RK818_LDO4_ON_VSEL_REG 0x41
+#define RK818_LDO4_SLP_VSEL_REG 0x42
+#define RK818_LDO5_ON_VSEL_REG 0x43
+#define RK818_LDO5_SLP_VSEL_REG 0x44
+#define RK818_LDO6_ON_VSEL_REG 0x45
+#define RK818_LDO6_SLP_VSEL_REG 0x46
+#define RK818_LDO7_ON_VSEL_REG 0x47
+#define RK818_LDO7_SLP_VSEL_REG 0x48
+#define RK818_LDO8_ON_VSEL_REG 0x49
+#define RK818_LDO8_SLP_VSEL_REG 0x4a
+#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
+#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
+#define RK818_DEVCTRL_REG 0x4b
+#define RK818_INT_STS_REG1 0X4c
+#define RK818_INT_STS_MSK_REG1 0x4d
+#define RK818_INT_STS_REG2 0x4e
+#define RK818_INT_STS_MSK_REG2 0x4f
+#define RK818_IO_POL_REG 0x50
+#define RK818_H5V_EN_REG 0x52
+#define RK818_SLEEP_SET_OFF_REG3 0x53
+#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
+#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
+#define RK818_BOOST_CTRL_REG 0x56
+#define RK818_DCDC_ILMAX 0x90
+#define RK818_USB_CTRL_REG 0xa1
+
+#define RK818_H5V_EN BIT(0)
+#define RK818_REF_RDY_CTRL BIT(1)
+#define RK818_USB_ILIM_SEL_MASK 0xf
+#define RK818_USB_ILMIN_2000MA 0x7
+#define RK818_USB_CHG_SD_VSEL_MASK 0x70
+
+/* RK808 IRQ Definitions */
#define RK808_IRQ_VOUT_LO 0
#define RK808_IRQ_VB_LO 1
#define RK808_IRQ_PWRON 2
#define RK808_IRQ_PLUG_IN_INT_MSK BIT(0)
#define RK808_IRQ_PLUG_OUT_INT_MSK BIT(1)
+/* RK818 IRQ Definitions */
+#define RK818_IRQ_VOUT_LO 0
+#define RK818_IRQ_VB_LO 1
+#define RK818_IRQ_PWRON 2
+#define RK818_IRQ_PWRON_LP 3
+#define RK818_IRQ_HOTDIE 4
+#define RK818_IRQ_RTC_ALARM 5
+#define RK818_IRQ_RTC_PERIOD 6
+#define RK818_IRQ_USB_OV 7
+#define RK818_IRQ_PLUG_IN 8
+#define RK818_IRQ_PLUG_OUT 9
+#define RK818_IRQ_CHG_OK 10
+#define RK818_IRQ_CHG_TE 11
+#define RK818_IRQ_CHG_TS1 12
+#define RK818_IRQ_TS2 13
+#define RK818_IRQ_CHG_CVTLIM 14
+#define RK818_IRQ_DISCHG_ILIM 7
+
+#define RK818_IRQ_VOUT_LO_MSK BIT(0)
+#define RK818_IRQ_VB_LO_MSK BIT(1)
+#define RK818_IRQ_PWRON_MSK BIT(2)
+#define RK818_IRQ_PWRON_LP_MSK BIT(3)
+#define RK818_IRQ_HOTDIE_MSK BIT(4)
+#define RK818_IRQ_RTC_ALARM_MSK BIT(5)
+#define RK818_IRQ_RTC_PERIOD_MSK BIT(6)
+#define RK818_IRQ_USB_OV_MSK BIT(7)
+#define RK818_IRQ_PLUG_IN_MSK BIT(0)
+#define RK818_IRQ_PLUG_OUT_MSK BIT(1)
+#define RK818_IRQ_CHG_OK_MSK BIT(2)
+#define RK818_IRQ_CHG_TE_MSK BIT(3)
+#define RK818_IRQ_CHG_TS1_MSK BIT(4)
+#define RK818_IRQ_TS2_MSK BIT(5)
+#define RK818_IRQ_CHG_CVTLIM_MSK BIT(6)
+#define RK818_IRQ_DISCHG_ILIM_MSK BIT(7)
+
+#define RK818_NUM_IRQ 16
+
#define RK808_VBAT_LOW_2V8 0x00
#define RK808_VBAT_LOW_2V9 0x01
#define RK808_VBAT_LOW_3V0 0x02
BOOST_ILMIN_250MA,
};
+enum {
+ RK808_ID = 0x0000,
+ RK818_ID = 0x8181,
+};
+
struct rk808 {
- struct i2c_client *i2c;
- struct regmap_irq_chip_data *irq_data;
- struct regmap *regmap;
+ struct i2c_client *i2c;
+ struct regmap_irq_chip_data *irq_data;
+ struct regmap *regmap;
+ long variant;
+ const struct regmap_config *regmap_cfg;
+ const struct regmap_irq_chip *regmap_irq_chip;
};
-#endif /* __LINUX_REGULATOR_rk808_H */
+#endif /* __LINUX_REGULATOR_RK808_H */
projects / linux.git / commitdiff