};
/* Set Local LLDP MIB (indirect 0x0A08)
- * Used to replace the local MIB of a given LLDP agent. e.g. DCBx
+ * Used to replace the local MIB of a given LLDP agent. e.g. DCBX
*/
struct ice_aqc_lldp_set_local_mib {
u8 type;
};
/* Stop/Start LLDP Agent (direct 0x0A09)
- * Used for stopping/starting specific LLDP agent. e.g. DCBx.
+ * Used for stopping/starting specific LLDP agent. e.g. DCBX.
* The same structure is used for the response, with the command field
* being used as the status field.
*/
if (!status) {
u16 i;
- /* Save fw logging information into the hw structure */
+ /* Save FW logging information into the HW structure */
for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) {
u16 v, m, flgs;
* ice_get_itr_intrl_gran - determine int/intrl granularity
* @hw: pointer to the HW struct
*
- * Determines the itr/intrl granularities based on the maximum aggregate
+ * Determines the ITR/intrl granularities based on the maximum aggregate
* bandwidth according to the device's configuration during power-on.
*/
static void ice_get_itr_intrl_gran(struct ice_hw *hw)
ice_debug(hw, ICE_DBG_SCHED, "VM%d disable failed %d\n",
vmvf_num, hw->adminq.sq_last_status);
else
- ice_debug(hw, ICE_DBG_SCHED, "disable Q %d failed %d\n",
+ ice_debug(hw, ICE_DBG_SCHED, "disable queue %d failed %d\n",
le16_to_cpu(qg_list[0].q_id[0]),
hw->adminq.sq_last_status);
}
/* free the buffer info list */ \
if ((qi)->ring.cmd_buf) \
devm_kfree(ice_hw_to_dev(hw), (qi)->ring.cmd_buf); \
- /* free dma head */ \
+ /* free DMA head */ \
devm_kfree(ice_hw_to_dev(hw), (qi)->ring.dma_head); \
} while (0)
#define ICE_CTL_Q_SQ_CMD_TIMEOUT 250 /* msecs */
struct ice_ctl_q_ring {
- void *dma_head; /* Virtual address to dma head */
+ void *dma_head; /* Virtual address to DMA head */
struct ice_dma_mem desc_buf; /* descriptor ring memory */
void *cmd_buf; /* command buffer memory */
/**
* ice_aq_get_dcb_cfg
* @hw: pointer to the HW struct
- * @mib_type: mib type for the query
+ * @mib_type: MIB type for the query
* @bridgetype: bridge type for the query (remote)
* @dcbcfg: store for LLDPDU data
*
}
/**
- * ice_aq_start_stop_dcbx - Start/Stop DCBx service in FW
+ * ice_aq_start_stop_dcbx - Start/Stop DCBX service in FW
* @hw: pointer to the HW struct
- * @start_dcbx_agent: True if DCBx Agent needs to be started
- * False if DCBx Agent needs to be stopped
- * @dcbx_agent_status: FW indicates back the DCBx agent status
- * True if DCBx Agent is active
- * False if DCBx Agent is stopped
+ * @start_dcbx_agent: True if DCBX Agent needs to be started
+ * False if DCBX Agent needs to be stopped
+ * @dcbx_agent_status: FW indicates back the DCBX agent status
+ * True if DCBX Agent is active
+ * False if DCBX Agent is stopped
* @cd: pointer to command details structure or NULL
*
* Start/Stop the embedded dcbx Agent. In case that this wrapper function
/**
* ice_dcb_init_cfg - set the initial DCB config in SW
- * @pf: pf to apply config to
+ * @pf: PF to apply config to
* @locked: Is the RTNL held
*/
static int ice_dcb_init_cfg(struct ice_pf *pf, bool locked)
/**
* ice_dcb_sw_default_config - Apply a default DCB config
- * @pf: pf to apply config to
+ * @pf: PF to apply config to
* @locked: was this function called with RTNL held
*/
static int ice_dcb_sw_dflt_cfg(struct ice_pf *pf, bool locked)
/**
* ice_init_pf_dcb - initialize DCB for a PF
- * @pf: pf to initiialize DCB for
+ * @pf: PF to initialize DCB for
* @locked: Was function called with RTNL held
*/
int ice_init_pf_dcb(struct ice_pf *pf, bool locked)
err = ice_init_dcb(hw);
if (err) {
- /* FW LLDP is not active, default to SW DCBx/LLDP */
+ /* FW LLDP is not active, default to SW DCBX/LLDP */
dev_info(&pf->pdev->dev, "FW LLDP is not active\n");
hw->port_info->dcbx_status = ICE_DCBX_STATUS_NOT_STARTED;
hw->port_info->is_sw_lldp = true;
/* store the old configuration */
tmp_dcbx_cfg = pf->hw.port_info->local_dcbx_cfg;
- /* Reset the old DCBx configuration data */
+ /* Reset the old DCBX configuration data */
memset(&pi->local_dcbx_cfg, 0, sizeof(pi->local_dcbx_cfg));
- /* Get updated DCBx data from firmware */
+ /* Get updated DCBX data from firmware */
ret = ice_get_dcb_cfg(pf->hw.port_info);
if (ret) {
dev_err(&pf->pdev->dev, "Failed to get DCB config\n");
dev_warn(&pf->pdev->dev,
"Fail to start LLDP Agent\n");
- /* AQ command to start FW DCBx agent will fail if
+ /* AQ command to start FW DCBX agent will fail if
* the agent is already started
*/
status = ice_aq_start_stop_dcbx(&pf->hw, true,
* recipe, since VSI/VSI list is ignored with drop action...
* Also add rules to handle LLDP Tx and Rx packets. Tx LLDP packets
* need to be dropped so that VFs cannot send LLDP packets to reconfig
- * DCB settings in the HW. Also, if the FW DCBx engine is not running
+ * DCB settings in the HW. Also, if the FW DCBX engine is not running
* then Rx LLDP packets need to be redirected up the stack.
*/
if (vsi->type == ICE_VSI_PF) {
/**
* ice_is_reset_in_progress - check for a reset in progress
- * @state: pf state field
+ * @state: PF state field
*/
bool ice_is_reset_in_progress(unsigned long *state)
{
* ice_init_mac_fltr - Set initial MAC filters
* @pf: board private structure
*
- * Set initial set of mac filters for PF VSI; configure filters for permanent
+ * Set initial set of MAC filters for PF VSI; configure filters for permanent
* address and broadcast address. If an error is encountered, netdevice will be
* unregistered.
*/
switch (vsi->port_info->fc.current_mode) {
case ICE_FC_FULL:
- fc = "RX/TX";
+ fc = "Rx/Tx";
break;
case ICE_FC_TX_PAUSE:
- fc = "TX";
+ fc = "Tx";
break;
case ICE_FC_RX_PAUSE:
- fc = "RX";
+ fc = "Rx";
break;
case ICE_FC_NONE:
fc = "None";
/**
* ice_link_event - process the link event
- * @pf: pf that the link event is associated with
+ * @pf: PF that the link event is associated with
* @pi: port_info for the port that the link event is associated with
* @link_up: true if the physical link is up and false if it is down
* @link_speed: current link speed received from the link event
/**
* ice_handle_link_event - handle link event via ARQ
- * @pf: pf that the link event is associated with
+ * @pf: PF that the link event is associated with
* @event: event structure containing link status info
*/
static int
if (!pf)
return -ENOMEM;
- /* set up for high or low dma */
+ /* set up for high or low DMA */
err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
if (err)
err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
err = ice_setup_pf_sw(pf);
if (err) {
- dev_err(dev, "probe failed due to setup pf switch:%d\n", err);
+ dev_err(dev, "probe failed due to setup PF switch:%d\n", err);
goto err_alloc_sw_unroll;
}
status = pci_register_driver(&ice_driver);
if (status) {
- pr_err("failed to register pci driver, err %d\n", status);
+ pr_err("failed to register PCI driver, err %d\n", status);
destroy_workqueue(ice_wq);
}
ice_free_fltr_list(&pf->pdev->dev, &a_mac_list);
if (err) {
- netdev_err(netdev, "can't set mac %pM. filter update failed\n",
+ netdev_err(netdev, "can't set MAC %pM. filter update failed\n",
mac);
return err;
}
/* change the netdev's MAC address */
memcpy(netdev->dev_addr, mac, netdev->addr_len);
- netdev_dbg(vsi->netdev, "updated mac address to %pM\n",
+ netdev_dbg(vsi->netdev, "updated MAC address to %pM\n",
netdev->dev_addr);
/* write new MAC address to the firmware */
flags = ICE_AQC_MAN_MAC_UPDATE_LAA_WOL;
status = ice_aq_manage_mac_write(hw, mac, flags, NULL);
if (status) {
- netdev_err(netdev, "can't set mac %pM. write to firmware failed.\n",
+ netdev_err(netdev, "can't set MAC %pM. write to firmware failed.\n",
mac);
}
return 0;
}
/**
- * ice_vsi_rebuild_all - rebuild all VSIs in pf
+ * ice_vsi_rebuild_all - rebuild all VSIs in PF
* @pf: the PF
*/
static int ice_vsi_rebuild_all(struct ice_pf *pf)
/**
* ice_rebuild - rebuild after reset
- * @pf: pf to rebuild
+ * @pf: PF to rebuild
*/
static void ice_rebuild(struct ice_pf *pf)
{
if (test_bit(__ICE_DOWN, pf->state))
goto clear_recovery;
- dev_dbg(dev, "rebuilding pf\n");
+ dev_dbg(dev, "rebuilding PF\n");
ret = ice_init_all_ctrlq(hw);
if (ret) {
u8 count = 0;
if (new_mtu == netdev->mtu) {
- netdev_warn(netdev, "mtu is already %u\n", netdev->mtu);
+ netdev_warn(netdev, "MTU is already %u\n", netdev->mtu);
return 0;
}
if (new_mtu < netdev->min_mtu) {
- netdev_err(netdev, "new mtu invalid. min_mtu is %d\n",
+ netdev_err(netdev, "new MTU invalid. min_mtu is %d\n",
netdev->min_mtu);
return -EINVAL;
} else if (new_mtu > netdev->max_mtu) {
- netdev_err(netdev, "new mtu invalid. max_mtu is %d\n",
+ netdev_err(netdev, "new MTU invalid. max_mtu is %d\n",
netdev->min_mtu);
return -EINVAL;
}
} while (count < 100);
if (count == 100) {
- netdev_err(netdev, "can't change mtu. Device is busy\n");
+ netdev_err(netdev, "can't change MTU. Device is busy\n");
return -EBUSY;
}
err = ice_down(vsi);
if (err) {
- netdev_err(netdev, "change mtu if_up err %d\n", err);
+ netdev_err(netdev, "change MTU if_up err %d\n", err);
return err;
}
err = ice_up(vsi);
if (err) {
- netdev_err(netdev, "change mtu if_up err %d\n", err);
+ netdev_err(netdev, "change MTU if_up err %d\n", err);
return err;
}
}
if (!tx_ring->tx_buf)
return;
- /* Free all the Tx ring sk_bufss */
+ /* Free all the Tx ring sk_buffs */
for (i = 0; i < tx_ring->count; i++)
ice_unmap_and_free_tx_buf(tx_ring, &tx_ring->tx_buf[i]);
* ice_adjust_itr_by_size_and_speed - Adjust ITR based on current traffic
* @port_info: port_info structure containing the current link speed
* @avg_pkt_size: average size of Tx or Rx packets based on clean routine
- * @itr: itr value to update
+ * @itr: ITR value to update
*
* Calculate how big of an increment should be applied to the ITR value passed
* in based on wmem_default, SKB overhead, Ethernet overhead, and the current
*/
static u32 ice_buildreg_itr(u16 itr_idx, u16 itr)
{
- /* The itr value is reported in microseconds, and the register value is
+ /* The ITR value is reported in microseconds, and the register value is
* recorded in 2 microsecond units. For this reason we only need to
* shift by the GLINT_DYN_CTL_INTERVAL_S - ICE_ITR_GRAN_S to apply this
* granularity as a shift instead of division. The mask makes sure the
return;
dma_error:
- /* clear dma mappings for failed tx_buf map */
+ /* clear DMA mappings for failed tx_buf map */
for (;;) {
tx_buf = &tx_ring->tx_buf[i];
ice_unmap_and_free_tx_buf(tx_ring, tx_buf);
struct ice_fw_log_cfg fw_log;
/* Device max aggregate bandwidths corresponding to the GL_PWR_MODE_CTL
- * register. Used for determining the itr/intrl granularity during
+ * register. Used for determining the ITR/intrl granularity during
* initialization.
*/
#define ICE_MAX_AGG_BW_200G 0x0
*/
clear_bit(ICE_VF_STATE_INIT, vf->vf_states);
- /* free vsi & disconnect it from the parent uplink */
+ /* free VSI and disconnect it from the parent uplink */
if (vf->lan_vsi_idx) {
ice_vsi_release(pf->vsi[vf->lan_vsi_idx]);
vf->lan_vsi_idx = 0;
vf->first_vector_idx = ice_calc_vf_first_vector_idx(pf, vf);
vsi = ice_vf_vsi_setup(pf, pf->hw.port_info, vf->vf_id);
-
if (!vsi) {
dev_err(&pf->pdev->dev, "Failed to create VF VSI\n");
return -ENOMEM;
}
/**
- * ice_pf_state_is_nominal - checks the pf for nominal state
- * @pf: pointer to pf to check
+ * ice_pf_state_is_nominal - checks the PF for nominal state
+ * @pf: pointer to PF to check
*
* Check the PF's state for a collection of bits that would indicate
* the PF is in a state that would inhibit normal operation for
/**
* ice_find_vsi_from_id
- * @pf: the pf structure to search for the VSI
+ * @pf: the PF structure to search for the VSI
* @id: ID of the VSI it is searching for
*
* searches for the VSI with the given ID
projects / linux.git / commitdiff