T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
S: Maintained
F: arch/arm/*omap*/
+F: arch/arm/configs/omap1_defconfig
+F: arch/arm/configs/omap2plus_defconfig
F: drivers/i2c/busses/i2c-omap.c
F: drivers/irqchip/irq-omap-intc.c
F: drivers/mfd/*omap*.c
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-media@vger.kernel.org
S: Maintained
+ F: Documentation/devicetree/bindings/media/ti,omap3isp.txt
F: drivers/media/platform/omap3isp/
F: drivers/staging/media/omap4iss/
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
- imx6sl-evk.dtb
+ imx6sl-evk.dtb \
+ imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sabreauto.dtb \
+ imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
omap3-overo-storm-tobi.dtb \
omap3-overo-summit.dtb \
omap3-overo-tobi.dtb \
+ omap3-pandora-600mhz.dtb \
+ omap3-pandora-1ghz.dtb \
omap3-sbc-t3517.dtb \
omap3-sbc-t3530.dtb \
omap3-sbc-t3730.dtb \
am335x-evmsk.dtb \
am335x-nano.dtb \
am335x-pepper.dtb \
- am335x-lxm.dtb
+ am335x-lxm.dtb \
+ am335x-chiliboard.dtb
dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-duovero-parlor.dtb \
omap4-panda.dtb \
cache-level = <2>;
};
- am43xx_control_module: control_module@4a002000 {
- compatible = "syscon";
- reg = <0x44e10000 0x7f4>;
- };
-
- am43xx_pinmux: pinmux@44e10800 {
- compatible = "ti,am437-padconf", "pinctrl-single";
- reg = <0x44e10800 0x31c>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
ocp {
compatible = "ti,am4372-l3-noc", "simple-bus";
#address-cells = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- prcm: prcm@44df0000 {
- compatible = "ti,am4-prcm";
- reg = <0x44df0000 0x11000>;
-
- prcm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ l4_wkup: l4_wkup@44c00000 {
+ compatible = "ti,am4-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x44c00000 0x287000>;
- prcm_clockdomains: clockdomains {
- };
- };
+ prcm: prcm@1f0000 {
+ compatible = "ti,am4-prcm";
+ reg = <0x1f0000 0x11000>;
- scrm: scrm@44e10000 {
- compatible = "ti,am4-scrm";
- reg = <0x44e10000 0x2000>;
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+ prcm_clockdomains: clockdomains {
+ };
};
- scrm_clockdomains: clockdomains {
+ scm: scm@210000 {
+ compatible = "ti,am4-scm", "simple-bus";
+ reg = <0x210000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x210000 0x4000>;
+
+ am43xx_pinmux: pinmux@800 {
+ compatible = "ti,am437-padconf",
+ "pinctrl-single";
+ reg = <0x800 0x31c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
};
};
};
ocp2scp0: ocp2scp@483a8000 {
- compatible = "ti,omap-ocp2scp";
+ compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
};
ocp2scp1: ocp2scp@483e8000 {
- compatible = "ti,omap-ocp2scp";
+ compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
};
hdq: hdq@48347000 {
- compatible = "ti,am43xx-hdq";
+ compatible = "ti,am4372-hdq";
reg = <0x48347000 0x1000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&func_12m_clk>;
clocks = <&dcan0_fck>;
clock-names = "fck";
reg = <0x481cc000 0x2000>;
- syscon-raminit = <&am43xx_control_module 0x644 0>;
+ syscon-raminit = <&scm_conf 0x644 0>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clocks = <&dcan1_fck>;
clock-names = "fck";
reg = <0x481d0000 0x2000>;
- syscon-raminit = <&am43xx_control_module 0x644 1>;
+ syscon-raminit = <&scm_conf 0x644 1>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
/dts-v1/;
#include "dra74x.dtsi"
- #include <dt-bindings/clk/ti-dra7-atl.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
+ #cooling-cells = <2>;
};
extcon_usb1: extcon_usb1 {
pinctrl-0 = <&tmp102_pins_default>;
interrupt-parent = <&gpio7>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
};
};
pinctrl-0 = <&usb1_pins>;
};
+ &omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+ };
+
+ &omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+ };
+
&usb2 {
dr_mode = "peripheral";
};
+
+&cpu_trips {
+ cpu_alert1: cpu_alert1 {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+};
+
+&cpu_cooling_maps {
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+};
+
+&thermal_zones {
+ board_thermal: board_thermal {
+ polling-delay-passive = <1250>; /* milliseconds */
+ polling-delay = <1500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&tmp102 0>;
+
+ board_trips: trips {
+ board_alert0: board_alert {
+ temperature = <40000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ board_crit: board_crit {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ board_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&board_alert0>;
+ cooling-device =
+ <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
- prm: prm@4ae06000 {
- compatible = "ti,dra7-prm";
- reg = <0x4ae06000 0x3000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ l4_cfg: l4@4a000000 {
+ compatible = "ti,dra7-l4-cfg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a000000 0x22c000>;
- prm_clocks: clocks {
+ scm: scm@2000 {
+ compatible = "ti,dra7-scm-core", "simple-bus";
+ reg = <0x2000 0x2000>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x1400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0xe00 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+
+ dra7_pmx_core: pinmux@1400 {
+ compatible = "ti,dra7-padconf",
+ "pinctrl-single";
+ reg = <0x1400 0x0464>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x3fffffff>;
+ };
+ };
+
+ cm_core_aon: cm_core_aon@5000 {
+ compatible = "ti,dra7-cm-core-aon";
+ reg = <0x5000 0x2000>;
+
+ cm_core_aon_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_aon_clockdomains: clockdomains {
+ };
+ };
+
+ cm_core: cm_core@8000 {
+ compatible = "ti,dra7-cm-core";
+ reg = <0x8000 0x3000>;
+
+ cm_core_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_clockdomains: clockdomains {
+ };
};
+ };
- prm_clockdomains: clockdomains {
+ l4_wkup: l4@4ae00000 {
+ compatible = "ti,dra7-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4ae00000 0x3f000>;
+
+ counter32k: counter@4000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4000 0x40>;
+ ti,hwmods = "counter_32k";
+ };
+
+ prm: prm@6000 {
+ compatible = "ti,dra7-prm";
+ reg = <0x6000 0x3000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
};
};
};
};
- cm_core_aon: cm_core_aon@4a005000 {
- compatible = "ti,dra7-cm-core-aon";
- reg = <0x4a005000 0x2000>;
-
- cm_core_aon_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm_core_aon_clockdomains: clockdomains {
- };
- };
-
- cm_core: cm_core@4a008000 {
- compatible = "ti,dra7-cm-core";
- reg = <0x4a008000 0x3000>;
-
- cm_core_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm_core_clockdomains: clockdomains {
- };
- };
-
- counter32k: counter@4ae04000 {
- compatible = "ti,omap-counter32k";
- reg = <0x4ae04000 0x40>;
- ti,hwmods = "counter_32k";
+ bandgap: bandgap@4a0021e0 {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c
+ 0x4a002564 0x8
+ 0x4a002574 0x50>;
+ compatible = "ti,dra752-bandgap";
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
};
dra7_ctrl_core: ctrl_core@4a002000 {
reg = <0x4a002e00 0x7c>;
};
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0 0x4>;
- syscon = <&dra7_ctrl_general>;
- pbias_mmc_reg: pbias_mmc_omap5 {
- regulator-name = "pbias_mmc_omap5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
-
- dra7_pmx_core: pinmux@4a003400 {
- compatible = "ti,dra7-padconf", "pinctrl-single";
- reg = <0x4a003400 0x0464>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x3fffffff>;
- };
-
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
reg = <0x48820000 0x80>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer5";
- ti,timer-dsp;
};
timer6: timer@48822000 {
reg = <0x48822000 0x80>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer6";
- ti,timer-dsp;
- ti,timer-pwm;
};
timer7: timer@48824000 {
reg = <0x48824000 0x80>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer7";
- ti,timer-dsp;
};
timer8: timer@48826000 {
reg = <0x48826000 0x80>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer8";
- ti,timer-dsp;
- ti,timer-pwm;
};
timer9: timer@4803e000 {
reg = <0x48088000 0x80>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer11";
- ti,timer-pwm;
};
timer13: timer@48828000 {
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan1";
reg = <0x4ae3c000 0x2000>;
- syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+ syscon-raminit = <&scm_conf 0x558 0>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&dcan1_sys_clk_mux>;
status = "disabled";
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan2";
reg = <0x48480000 0x2000>;
- syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+ syscon-raminit = <&scm_conf 0x558 1>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sys_clkin1>;
status = "disabled";
};
};
+
+ thermal_zones: thermal-zones {
+ #include "omap4-cpu-thermal.dtsi"
+ #include "omap5-gpu-thermal.dtsi"
+ #include "omap5-core-thermal.dtsi"
+ };
+
+};
+
+&cpu_thermal {
+ polling-delay = <500>; /* milliseconds */
};
/include/ "dra7xx-clocks.dtsi"
* kind, whether express or implied.
*/
+ #include <dt-bindings/media/omap3-isp.h>
+
#include "omap3.dtsi"
/ {
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
- syscon = <&omap3_scm_general 0xdc>;
+
+ isp: isp@480bc000 {
+ compatible = "ti,omap3-isp";
+ reg = <0x480bc000 0x12fc
+ 0x480bd800 0x017c>;
+ interrupts = <24>;
+ iommus = <&mmu_isp>;
++ syscon = <&scm_conf 0xdc>;
+ ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
+ #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
};
* kind, whether express or implied.
*/
+ #include <dt-bindings/media/omap3-isp.h>
+
#include "omap3.dtsi"
/ {
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
- syscon = <&omap3_scm_general 0x2f0>;
+
+ isp: isp@480bc000 {
+ compatible = "ti,omap3-isp";
+ reg = <0x480bc000 0x12fc
+ 0x480bd800 0x0600>;
+ interrupts = <24>;
+ iommus = <&mmu_isp>;
++ syscon = <&scm_conf 0x2f0>;
+ ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
+ #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
};
projects / linux.git / commitdiff