compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
model = "Raspberry Pi Model A+";
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x10000000>;
+ };
+
leds {
act {
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
compatible = "raspberrypi,model-a", "brcm,bcm2835";
model = "Raspberry Pi Model A";
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x10000000>;
+ };
+
leds {
act {
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
model = "Raspberry Pi Model B+";
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x20000000>;
+ };
+
leds {
act {
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
model = "Raspberry Pi Model B rev2";
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x10000000>;
+ };
+
leds {
act {
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
compatible = "raspberrypi,model-b", "brcm,bcm2835";
model = "Raspberry Pi Model B";
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x10000000>;
+ };
+
leds {
act {
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x20000000>;
+ };
+
reg_3v3: fixed-regulator {
compatible = "regulator-fixed";
regulator-name = "3V3";
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
model = "Raspberry Pi Zero W";
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x20000000>;
+ };
+
chosen {
/* 8250 auxiliary UART instead of pl011 */
stdout-path = "serial1:115200n8";
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
model = "Raspberry Pi Zero";
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x20000000>;
+ };
+
leds {
act {
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
#include <dt-bindings/power/raspberrypi-power.h>
/ {
- memory@0 {
- device_type = "memory";
- reg = <0 0x10000000>;
- };
-
leds {
compatible = "gpio-leds";
model = "Raspberry Pi 2 Model B";
memory@0 {
+ device_type = "memory";
reg = <0 0x40000000>;
};
};
memory@0 {
+ device_type = "memory";
reg = <0 0x20000000>;
};
};
memory@0 {
+ device_type = "memory";
reg = <0 0x40000000>;
};
};
memory@0 {
+ device_type = "memory";
reg = <0 0x40000000>;
};
/ {
memory@0 {
+ device_type = "memory";
reg = <0 0x40000000>;
};