pinctrl: cherryview: Fix irq_valid_mask calculation

Commit 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux
GPIO translation") has made the cherryview gpio numbers sparse, to get
a 1:1 mapping between ACPI pin numbers and gpio numbers in Linux.

This has greatly simplified things, but the code setting the
irq_valid_mask was not updated for this, so the valid mask is still in
the old "compressed" numbering with the gaps in the pin numbers skipped,
which is wrong as irq_valid_mask needs to be expressed in gpio numbers.

This results in the following error on devices using pin 24 (0x0018) on
the north GPIO controller as an ACPI event source:

[    0.422452] cherryview-pinctrl INT33FF:01: Failed to translate GPIO to IRQ

This has been reported (by email) to be happening on a Caterpillar CAT T20
tablet and I've reproduced this myself on a Medion Akoya e2215t 2-in-1.

This commit uses the pin number instead of the compressed index into
community->pins to clear the correct bits in irq_valid_mask for GPIOs
using GPEs for interrupts, fixing these errors and in case of the
Medion Akoya e2215t also fixing the LID switch not working.

Cc: stable@vger.kernel.org
Fixes: 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index c6251eac8946c339af412763887b1ef93d537555..c31266e70559cb38041f5f2c1927c1ef03752d4e 100644 (file)
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -1559,7 +1559,7 @@ static void chv_init_irq_valid_mask(struct gpio_chip *chip,
                intsel >>= CHV_PADCTRL0_INTSEL_SHIFT;
 
                if (intsel >= community->nirqs)
-                       clear_bit(i, valid_mask);
+                       clear_bit(desc->number, valid_mask);
        }
 }