USB: musb: Add new fifo table for a OMAP3 errata

We have observed MSC data read corruption when USB LAN device is
also connected and it's interface is up.

Silicon team has confirmed an errata where in all the active
transfers should use FIFO space either in first 8K or next 8K.
So far we have observed the issue in above use case scenario.

As a workaround to it, adding a new FIFO config (5) fitting well
within first 8K which can be used for such use cases.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index b7e2d1b09ac153ad5cce328f75282989d4779f66..c4893267b4e2e6fd67079464ab82a42bac151250 100644 (file)
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1095,6 +1095,36 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
 { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
 };
 
+/* mode 5 - fits in 8KB */
+static struct fifo_cfg __initdata mode_5_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
 
 /*
  * configure a fifo; for non-shared endpoints, this may be called
@@ -1210,6 +1240,10 @@ static int __init ep_config_from_table(struct musb *musb)
                cfg = mode_4_cfg;
                n = ARRAY_SIZE(mode_4_cfg);
                break;
+       case 5:
+               cfg = mode_5_cfg;
+               n = ARRAY_SIZE(mode_5_cfg);
+               break;
        }
 
        printk(KERN_DEBUG "%s: setup fifo_mode %d\n",