+++ /dev/null
-
-/*
- * Copyright (C) 2013 STMicroelectronics Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "st-pincfg.h"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-
- aliases {
- gpio0 = &pio0;
- gpio1 = &pio1;
- gpio2 = &pio2;
- gpio3 = &pio3;
- gpio4 = &pio4;
- gpio5 = &pio40;
- gpio6 = &pio5;
- gpio7 = &pio6;
- gpio8 = &pio7;
- gpio9 = &pio8;
- gpio10 = &pio9;
- gpio11 = &pio10;
- gpio12 = &pio11;
- gpio13 = &pio12;
- gpio14 = &pio30;
- gpio15 = &pio31;
- gpio16 = &pio13;
- gpio17 = &pio14;
- gpio18 = &pio15;
- gpio19 = &pio16;
- gpio20 = &pio17;
- gpio21 = &pio18;
- gpio22 = &pio100;
- gpio23 = &pio101;
- gpio24 = &pio102;
- gpio25 = &pio103;
- gpio26 = &pio104;
- gpio27 = &pio105;
- gpio28 = &pio106;
- gpio29 = &pio107;
- };
-
- soc {
- pin-controller-sbc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stih416-sbc-pinctrl";
- st,syscfg = <&syscfg_sbc>;
- reg = <0xfe61f080 0x4>;
- reg-names = "irqmux";
- interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "irqmux";
- ranges = <0 0xfe610000 0x6000>;
-
- pio0: gpio@fe610000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0 0x100>;
- st,bank-name = "PIO0";
- };
- pio1: gpio@fe611000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x100>;
- st,bank-name = "PIO1";
- };
- pio2: gpio@fe612000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x100>;
- st,bank-name = "PIO2";
- };
- pio3: gpio@fe613000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x3000 0x100>;
- st,bank-name = "PIO3";
- };
- pio4: gpio@fe614000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x4000 0x100>;
- st,bank-name = "PIO4";
- };
- pio40: gpio@fe615000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x5000 0x100>;
- st,bank-name = "PIO40";
- st,retime-pin-mask = <0x7f>;
- };
-
- rc{
- pinctrl_ir: ir0 {
- st,pins {
- ir = <&pio4 0 ALT2 IN>;
- };
- };
- };
- sbc_serial1 {
- pinctrl_sbc_serial1: sbc_serial1 {
- st,pins {
- tx = <&pio2 6 ALT3 OUT>;
- rx = <&pio2 7 ALT3 IN>;
- };
- };
- };
-
- keyscan {
- pinctrl_keyscan: keyscan {
- st,pins {
- keyin0 = <&pio0 2 ALT2 IN>;
- keyin1 = <&pio0 3 ALT2 IN>;
- keyin2 = <&pio0 4 ALT2 IN>;
- keyin3 = <&pio2 6 ALT2 IN>;
-
- keyout0 = <&pio1 6 ALT2 OUT>;
- keyout1 = <&pio1 7 ALT2 OUT>;
- keyout2 = <&pio0 6 ALT2 OUT>;
- keyout3 = <&pio2 7 ALT2 OUT>;
- };
- };
- };
-
- sbc_i2c0 {
- pinctrl_sbc_i2c0_default: sbc_i2c0-default {
- st,pins {
- sda = <&pio4 6 ALT1 BIDIR>;
- scl = <&pio4 5 ALT1 BIDIR>;
- };
- };
- };
-
- usb {
- pinctrl_usb3: usb3 {
- st,pins {
- oc-detect = <&pio40 0 ALT1 IN>;
- pwr-enable = <&pio40 1 ALT1 OUT>;
- };
- };
- };
-
- sbc_i2c1 {
- pinctrl_sbc_i2c1_default: sbc_i2c1-default {
- st,pins {
- sda = <&pio3 2 ALT2 BIDIR>;
- scl = <&pio3 1 ALT2 BIDIR>;
- };
- };
- };
-
- gmac1 {
- pinctrl_mii1: mii1 {
- st,pins {
- txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
- col = <&pio0 7 ALT1 IN BYPASS 1000>;
-
- mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
- mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
- crs = <&pio1 2 ALT1 IN BYPASS 1000>;
- mdint = <&pio1 3 ALT1 IN BYPASS 0>;
- rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
- rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
- };
- };
- pinctrl_rgmii1: rgmii1-0 {
- st,pins {
- txd0 = <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
- txd1 = <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
- txd2 = <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
- txd3 = <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
- txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
- txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
-
- mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
- mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
- rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
- rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
- rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
- rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
-
- rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>;
- rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>;
-
- clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
- };
- };
- };
-
- pwm1 {
- pinctrl_pwm1_chan0_default: pwm1-0-default {
- st,pins {
- pwm-out = <&pio3 0 ALT1 OUT>;
- pwm-capturein = <&pio3 2 ALT1 IN>;
-
- };
- };
- pinctrl_pwm1_chan1_default: pwm1-1-default {
- st,pins {
- pwm-out = <&pio4 4 ALT1 OUT>;
- pwm-capturein = <&pio4 3 ALT1 IN>;
- };
- };
- pinctrl_pwm1_chan2_default: pwm1-2-default {
- st,pins {
- pwm-out = <&pio4 6 ALT3 OUT>;
- };
- };
- pinctrl_pwm1_chan3_default: pwm1-3-default {
- st,pins {
- pwm-out = <&pio4 7 ALT3 OUT>;
- };
- };
- };
- };
-
- pin-controller-front {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stih416-front-pinctrl";
- st,syscfg = <&syscfg_front>;
- reg = <0xfee0f080 0x4>;
- reg-names = "irqmux";
- interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "irqmux";
- ranges = <0 0xfee00000 0x10000>;
-
- pio5: gpio@fee00000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0 0x100>;
- st,bank-name = "PIO5";
- };
- pio6: gpio@fee01000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x100>;
- st,bank-name = "PIO6";
- };
- pio7: gpio@fee02000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x100>;
- st,bank-name = "PIO7";
- };
- pio8: gpio@fee03000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x3000 0x100>;
- st,bank-name = "PIO8";
- };
- pio9: gpio@fee04000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x4000 0x100>;
- st,bank-name = "PIO9";
- };
- pio10: gpio@fee05000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x5000 0x100>;
- st,bank-name = "PIO10";
- };
- pio11: gpio@fee06000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x6000 0x100>;
- st,bank-name = "PIO11";
- };
- pio12: gpio@fee07000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x7000 0x100>;
- st,bank-name = "PIO12";
- };
- pio30: gpio@fee08000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x8000 0x100>;
- st,bank-name = "PIO30";
- };
- pio31: gpio@fee09000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x9000 0x100>;
- st,bank-name = "PIO31";
- };
-
- pwm0 {
- pinctrl_pwm0_chan0_default: pwm0-0-default {
- st,pins {
- pwm-out = <&pio9 7 ALT2 OUT>;
- pwm-capturein = <&pio9 6 ALT2 IN>;
- };
- };
- };
-
- serial2-oe {
- pinctrl_serial2_oe: serial2-1 {
- st,pins {
- output-enable = <&pio11 3 ALT2 OUT>;
- };
- };
- };
-
- i2c0 {
- pinctrl_i2c0_default: i2c0-default {
- st,pins {
- sda = <&pio9 3 ALT1 BIDIR>;
- scl = <&pio9 2 ALT1 BIDIR>;
- };
- };
- };
-
- usb {
- pinctrl_usb0: usb0 {
- st,pins {
- oc-detect = <&pio9 4 ALT1 IN>;
- pwr-enable = <&pio9 5 ALT1 OUT>;
- };
- };
- };
-
-
- i2c1 {
- pinctrl_i2c1_default: i2c1-default {
- st,pins {
- sda = <&pio12 1 ALT1 BIDIR>;
- scl = <&pio12 0 ALT1 BIDIR>;
- };
- };
- };
-
- fsm {
- pinctrl_fsm: fsm {
- st,pins {
- spi-fsm-clk = <&pio12 2 ALT1 OUT>;
- spi-fsm-cs = <&pio12 3 ALT1 OUT>;
- spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
- spi-fsm-miso = <&pio12 5 ALT1 IN>;
- spi-fsm-hol = <&pio12 6 ALT1 OUT>;
- spi-fsm-wp = <&pio12 7 ALT1 OUT>;
- };
- };
- };
- };
-
- pin-controller-rear {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stih416-rear-pinctrl";
- st,syscfg = <&syscfg_rear>;
- reg = <0xfe82f080 0x4>;
- reg-names = "irqmux";
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "irqmux";
- ranges = <0 0xfe820000 0x6000>;
-
- pio13: gpio@fe820000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0 0x100>;
- st,bank-name = "PIO13";
- };
- pio14: gpio@fe821000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x100>;
- st,bank-name = "PIO14";
- };
- pio15: gpio@fe822000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x100>;
- st,bank-name = "PIO15";
- };
- pio16: gpio@fe823000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x3000 0x100>;
- st,bank-name = "PIO16";
- };
- pio17: gpio@fe824000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x4000 0x100>;
- st,bank-name = "PIO17";
- };
- pio18: gpio@fe825000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x5000 0x100>;
- st,bank-name = "PIO18";
- st,retime-pin-mask = <0xf>;
- };
-
- serial2 {
- pinctrl_serial2: serial2-0 {
- st,pins {
- tx = <&pio17 4 ALT2 OUT>;
- rx = <&pio17 5 ALT2 IN>;
- };
- };
- };
-
- gmac0 {
- pinctrl_mii0: mii0 {
- st,pins {
- mdint = <&pio13 6 ALT2 IN BYPASS 0>;
- txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
- txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
- txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
- txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- crs = <&pio15 2 ALT2 IN BYPASS 1000>;
- col = <&pio15 3 ALT2 IN BYPASS 1000>;
- mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
- mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
-
- rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
- phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
- };
- };
-
- pinctrl_gmii0: gmii0 {
- st,pins {
- };
- };
- pinctrl_rgmii0: rgmii0 {
- st,pins {
- phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>;
- txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
- txd0 = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
- txd1 = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
- txd2 = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
- txd3 = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
- txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
-
- mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
- mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
-
- rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
- rxd0 =<&pio16 0 ALT2 IN DE_IO 500 CLK_A>;
- rxd1 =<&pio16 1 ALT2 IN DE_IO 500 CLK_A>;
- rxd2 =<&pio16 2 ALT2 IN DE_IO 500 CLK_A>;
- rxd3 =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
- rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
-
- clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
- };
- };
- };
-
- mmc0 {
- pinctrl_mmc0: mmc0 {
- st,pins {
- mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
- data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
- data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
- data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
- data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
- cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
- wp = <&pio15 3 ALT4 IN>;
- data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
- data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
- data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
- data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
- pwr = <&pio17 1 ALT4 OUT>;
- cd = <&pio17 2 ALT4 IN>;
- led = <&pio17 3 ALT4 OUT>;
- };
- };
- };
- mmc1 {
- pinctrl_mmc1: mmc1 {
- st,pins {
- mmcclk = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>;
- data0 = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>;
- data1 = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>;
- data2 = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>;
- data3 = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>;
- cmd = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>;
- data4 = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>;
- data5 = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>;
- data6 = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>;
- data7 = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>;
- pwr = <&pio16 2 ALT3 OUT>;
- nreset = <&pio13 6 ALT3 OUT>;
- };
- };
- };
-
- usb {
- pinctrl_usb1: usb1 {
- st,pins {
- oc-detect = <&pio18 0 ALT1 IN>;
- pwr-enable = <&pio18 1 ALT1 OUT>;
- };
- };
- pinctrl_usb2: usb2 {
- st,pins {
- oc-detect = <&pio18 2 ALT1 IN>;
- pwr-enable = <&pio18 3 ALT1 OUT>;
- };
- };
- };
-
- pwm0 {
- pinctrl_pwm0_chan1_default: pwm0-1-default {
- st,pins {
- pwm-out = <&pio13 2 ALT2 OUT>;
- pwm-capturein = <&pio13 1 ALT2 IN>;
- };
- };
- pinctrl_pwm0_chan2_default: pwm0-2-default {
- st,pins {
- pwm-out = <&pio15 2 ALT4 OUT>;
- };
- };
- pinctrl_pwm0_chan3_default: pwm0-3-default {
- st,pins {
- pwm-out = <&pio17 4 ALT1 OUT>;
- };
- };
- };
-
- };
-
- pin-controller-fvdp-fe {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stih416-fvdp-fe-pinctrl";
- st,syscfg = <&syscfg_fvdp_fe>;
- reg = <0xfd6bf080 0x4>;
- reg-names = "irqmux";
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "irqmux";
- ranges = <0 0xfd6b0000 0x3000>;
-
- pio100: gpio@fd6b0000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0 0x100>;
- st,bank-name = "PIO100";
- };
- pio101: gpio@fd6b1000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x100>;
- st,bank-name = "PIO101";
- };
- pio102: gpio@fd6b2000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x100>;
- st,bank-name = "PIO102";
- };
- };
-
- pin-controller-fvdp-lite {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stih416-fvdp-lite-pinctrl";
- st,syscfg = <&syscfg_fvdp_lite>;
- reg = <0xfd33f080 0x4>;
- reg-names = "irqmux";
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "irqmux";
- ranges = <0 0xfd330000 0x5000>;
-
- pio103: gpio@fd330000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0 0x100>;
- st,bank-name = "PIO103";
- };
- pio104: gpio@fd331000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x100>;
- st,bank-name = "PIO104";
- };
- pio105: gpio@fd332000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x100>;
- st,bank-name = "PIO105";
- };
- pio106: gpio@fd333000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x3000 0x100>;
- st,bank-name = "PIO106";
- };
-
- pio107: gpio@fd334000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x4000 0x100>;
- st,bank-name = "PIO107";
- st,retime-pin-mask = <0xf>;
- };
- };
- };
-};
projects / linux.git / commitdiff