arm64: dts: meson-g12a: add missing dwc2 phy-names

The G12A USB2 OTG capable PHY uses a 8bit large UTMI bus, and the OTG
controller gets the PHY but width by probing the associated phy.

By default it will use 16bit wide settings if a phy is not specified,
in our case we specified the phy, but not the phy-names.

The dwc2 bindings specifies that if phys is present, phy-names shall be
"usb2-phy".

Adding phy-names = "usb2-phy" solves the OTG PHY bus configuration.

Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index f8d43e3dcf20ce4d57d2b17abd6693c4b2dad77a..1785552d450c448066c76d7251745eb54035b9b1 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -2386,6 +2386,7 @@ dwc2: usb@ff400000 {
                                clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
                                clock-names = "ddr";
                                phys = <&usb2_phy1>;
+                               phy-names = "usb2-phy";
                                dr_mode = "peripheral";
                                g-rx-fifo-size = <192>;
                                g-np-tx-fifo-size = <128>;