#define ASPEED_I2CD_INTR_RX_DONE BIT(2)
#define ASPEED_I2CD_INTR_TX_NAK BIT(1)
#define ASPEED_I2CD_INTR_TX_ACK BIT(0)
+#define ASPEED_I2CD_INTR_MASTER_ERRORS \
+ (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \
+ ASPEED_I2CD_INTR_SCL_TIMEOUT | \
+ ASPEED_I2CD_INTR_ABNORMAL | \
+ ASPEED_I2CD_INTR_ARBIT_LOSS)
#define ASPEED_I2CD_INTR_ALL \
(ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \
ASPEED_I2CD_INTR_BUS_RECOVER_DONE | \
}
#if IS_ENABLED(CONFIG_I2C_SLAVE)
-static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
+static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
{
- u32 command, irq_status, status_ack = 0;
+ u32 command, irq_handled = 0;
struct i2c_client *slave = bus->slave;
- bool irq_handled = true;
u8 value;
- if (!slave) {
- irq_handled = false;
- goto out;
- }
+ if (!slave)
+ return 0;
command = readl(bus->base + ASPEED_I2C_CMD_REG);
- irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
/* Slave was requested, restart state machine. */
if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
- status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
+ irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH;
bus->slave_state = ASPEED_I2C_SLAVE_START;
}
/* Slave is not currently active, irq was for someone else. */
- if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
- irq_handled = false;
- goto out;
- }
+ if (bus->slave_state == ASPEED_I2C_SLAVE_STOP)
+ return irq_handled;
dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
irq_status, command);
bus->slave_state =
ASPEED_I2C_SLAVE_WRITE_REQUESTED;
}
- status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+ irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
}
/* Slave was asked to stop. */
if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
- status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+ irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
bus->slave_state = ASPEED_I2C_SLAVE_STOP;
}
if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
- status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+ irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
bus->slave_state = ASPEED_I2C_SLAVE_STOP;
}
+ if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
+ irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
switch (bus->slave_state) {
case ASPEED_I2C_SLAVE_READ_REQUESTED:
if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
dev_err(bus->dev, "Unexpected ACK on read request.\n");
bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
-
i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
break;
case ASPEED_I2C_SLAVE_READ_PROCESSED:
- status_ack |= ASPEED_I2CD_INTR_TX_ACK;
if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
dev_err(bus->dev,
"Expected ACK after processed read.\n");
break;
}
- if (status_ack != irq_status)
- dev_err(bus->dev,
- "irq handled != irq. expected %x, but was %x\n",
- irq_status, status_ack);
- writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG);
-
-out:
return irq_handled;
}
#endif /* CONFIG_I2C_SLAVE */
return 0;
}
-static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
+static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
{
- u32 irq_status, status_ack = 0, command = 0;
+ u32 irq_handled = 0, command = 0;
struct i2c_msg *msg;
u8 recv_byte;
int ret;
- irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
- /* Ack all interrupt bits. */
- writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
-
if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
- status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
+ irq_handled |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
goto out_complete;
+ } else {
+ /* Master is not currently active, irq was for someone else. */
+ if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE)
+ goto out_no_complete;
}
/*
* INACTIVE state.
*/
ret = aspeed_i2c_is_irq_error(irq_status);
- if (ret < 0) {
+ if (ret) {
dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
irq_status);
bus->cmd_err = ret;
bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+ irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS);
goto out_complete;
}
/* We are in an invalid state; reset bus to a known state. */
if (!bus->msgs) {
- dev_err(bus->dev, "bus in unknown state\n");
+ dev_err(bus->dev, "bus in unknown state. irq_status: 0x%x\n",
+ irq_status);
bus->cmd_err = -EIO;
- if (bus->master_state != ASPEED_I2C_MASTER_STOP)
+ if (bus->master_state != ASPEED_I2C_MASTER_STOP &&
+ bus->master_state != ASPEED_I2C_MASTER_INACTIVE)
aspeed_i2c_do_stop(bus);
goto out_no_complete;
}
*/
if (bus->master_state == ASPEED_I2C_MASTER_START) {
if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+ if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) {
+ bus->cmd_err = -ENXIO;
+ bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+ goto out_complete;
+ }
pr_devel("no slave present at %02x\n", msg->addr);
- status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+ irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
bus->cmd_err = -ENXIO;
aspeed_i2c_do_stop(bus);
goto out_no_complete;
}
- status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+ irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
if (msg->len == 0) { /* SMBUS_QUICK */
aspeed_i2c_do_stop(bus);
goto out_no_complete;
case ASPEED_I2C_MASTER_TX:
if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
dev_dbg(bus->dev, "slave NACKed TX\n");
- status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+ irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
goto error_and_stop;
} else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
dev_err(bus->dev, "slave failed to ACK TX\n");
goto error_and_stop;
}
- status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+ irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
/* fallthrough intended */
case ASPEED_I2C_MASTER_TX_FIRST:
if (bus->buf_index < msg->len) {
dev_err(bus->dev, "master failed to RX\n");
goto error_and_stop;
}
- status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+ irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
msg->buf[bus->buf_index++] = recv_byte;
goto out_no_complete;
case ASPEED_I2C_MASTER_STOP:
if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
- dev_err(bus->dev, "master failed to STOP\n");
+ dev_err(bus->dev,
+ "master failed to STOP. irq_status:0x%x\n",
+ irq_status);
bus->cmd_err = -EIO;
/* Do not STOP as we have already tried. */
} else {
- status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+ irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
}
bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
bus->master_xfer_result = bus->msgs_index + 1;
complete(&bus->cmd_complete);
out_no_complete:
- if (irq_status != status_ack)
- dev_err(bus->dev,
- "irq handled != irq. expected 0x%08x, but was 0x%08x\n",
- irq_status, status_ack);
- return !!irq_status;
+ return irq_handled;
}
static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
{
struct aspeed_i2c_bus *bus = dev_id;
- bool ret;
+ u32 irq_received, irq_remaining, irq_handled;
spin_lock(&bus->lock);
+ irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+ irq_remaining = irq_received;
#if IS_ENABLED(CONFIG_I2C_SLAVE)
- if (aspeed_i2c_slave_irq(bus)) {
- dev_dbg(bus->dev, "irq handled by slave.\n");
- ret = true;
- goto out;
+ /*
+ * In most cases, interrupt bits will be set one by one, although
+ * multiple interrupt bits could be set at the same time. It's also
+ * possible that master interrupt bits could be set along with slave
+ * interrupt bits. Each case needs to be handled using corresponding
+ * handlers depending on the current state.
+ */
+ if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) {
+ irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
+ irq_remaining &= ~irq_handled;
+ if (irq_remaining)
+ irq_handled |= aspeed_i2c_slave_irq(bus, irq_remaining);
+ } else {
+ irq_handled = aspeed_i2c_slave_irq(bus, irq_remaining);
+ irq_remaining &= ~irq_handled;
+ if (irq_remaining)
+ irq_handled |= aspeed_i2c_master_irq(bus,
+ irq_remaining);
}
+#else
+ irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
#endif /* CONFIG_I2C_SLAVE */
- ret = aspeed_i2c_master_irq(bus);
+ irq_remaining &= ~irq_handled;
+ if (irq_remaining)
+ dev_err(bus->dev,
+ "irq handled != irq. expected 0x%08x, but was 0x%08x\n",
+ irq_received, irq_handled);
-out:
+ /* Ack all interrupt bits. */
+ writel(irq_received, bus->base + ASPEED_I2C_INTR_STS_REG);
spin_unlock(&bus->lock);
- return ret ? IRQ_HANDLED : IRQ_NONE;
+ return irq_remaining ? IRQ_NONE : IRQ_HANDLED;
}
static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
projects / linux.git / commitdiff