drm/amd/display: support CP2520 pattern 2 for HBR2 compliance

- also some clean up

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
index a1d35ad85605a5ce3090ae0a86fe89ed5b349ece..65cc64a17f4104f045ea150e3c3bad18a7e58c27 100644 (file)
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
@@ -169,9 +169,6 @@ static void disable_prbs_symbols(
 static void disable_prbs_mode(
        struct dce110_link_encoder *enc110)
 {
-       /* This register resides in DP back end block;
-        * transmitter is used for the offset */
-
        REG_UPDATE(DP_DPHY_PRBS_CNTL, DPHY_PRBS_EN, 0);
 }
 
@@ -216,9 +213,7 @@ static void set_dp_phy_pattern_d102(
 
        disable_prbs_symbols(enc110, true);
 
-       /* Disable PRBS mode,
-        * make sure DPHY_PRBS_CNTL.DPHY_PRBS_EN=0 */
-
+       /* Disable PRBS mode */
        disable_prbs_mode(enc110);
 
        /* Program debug symbols to be output */
@@ -264,43 +259,54 @@ void dce110_link_encoder_set_dp_phy_pattern_training_pattern(
 
        enable_phy_bypass_mode(enc110, false);
 
-       /* Disable PRBS mode,
-        * make sure DPHY_PRBS_CNTL.DPHY_PRBS_EN=0 */
-
+       /* Disable PRBS mode */
        disable_prbs_mode(enc110);
 }
 
+static void setup_panel_mode(
+       struct dce110_link_encoder *enc110,
+       enum dp_panel_mode panel_mode)
+{
+       uint32_t value;
+
+       ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
+       value = REG_READ(DP_DPHY_INTERNAL_CTRL);
+
+       switch (panel_mode) {
+       case DP_PANEL_MODE_EDP:
+               value = 0x1;
+               break;
+       case DP_PANEL_MODE_SPECIAL:
+               value = 0x11;
+               break;
+       default:
+               value = 0x0;
+               break;
+       }
+
+       REG_WRITE(DP_DPHY_INTERNAL_CTRL, value);
+}
+
 static void set_dp_phy_pattern_symbol_error(
        struct dce110_link_encoder *enc110)
 {
        /* Disable PHY Bypass mode to setup the test pattern */
-       uint32_t value = 0x0;
-
        enable_phy_bypass_mode(enc110, false);
 
        /* program correct panel mode*/
-       {
-               ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
-               /*DCE 120 does not have this reg*/
-
-               REG_WRITE(DP_DPHY_INTERNAL_CTRL, value);
-       }
+       setup_panel_mode(enc110, DP_PANEL_MODE_DEFAULT);
 
        /* A PRBS23 pattern is used for most DP electrical measurements. */
 
        /* Enable PRBS symbols on the lanes */
-
        disable_prbs_symbols(enc110, false);
 
        /* For PRBS23 Set bit DPHY_PRBS_SEL=1 and Set bit DPHY_PRBS_EN=1 */
-       {
-               REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
-                                       DPHY_PRBS_SEL, 1,
-                                       DPHY_PRBS_EN, 1);
-       }
+       REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
+                       DPHY_PRBS_SEL, 1,
+                       DPHY_PRBS_EN, 1);
 
        /* Enable phy bypass mode to enable the test pattern */
-
        enable_phy_bypass_mode(enc110, true);
 }
 
@@ -308,24 +314,19 @@ static void set_dp_phy_pattern_prbs7(
        struct dce110_link_encoder *enc110)
 {
        /* Disable PHY Bypass mode to setup the test pattern */
-
        enable_phy_bypass_mode(enc110, false);
 
        /* A PRBS7 pattern is used for most DP electrical measurements. */
 
        /* Enable PRBS symbols on the lanes */
-
        disable_prbs_symbols(enc110, false);
 
        /* For PRBS7 Set bit DPHY_PRBS_SEL=0 and Set bit DPHY_PRBS_EN=1 */
-       {
-               REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
-                                       DPHY_PRBS_SEL, 0,
-                                       DPHY_PRBS_EN, 1);
-       }
+       REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
+                       DPHY_PRBS_SEL, 0,
+                       DPHY_PRBS_EN, 1);
 
        /* Enable phy bypass mode to enable the test pattern */
-
        enable_phy_bypass_mode(enc110, true);
 }
 
@@ -374,7 +375,7 @@ static void set_dp_phy_pattern_80bit_custom(
        enable_phy_bypass_mode(enc110, true);
 }
 
-static void set_dp_phy_pattern_hbr2_compliance(
+static void set_dp_phy_pattern_hbr2_compliance_cp2520_2(
        struct dce110_link_encoder *enc110)
 {
 
@@ -391,56 +392,34 @@ static void set_dp_phy_pattern_hbr2_compliance(
        enable_phy_bypass_mode(enc110, false);
 
        /* Setup DIG encoder in DP SST mode */
-
        enc110->base.funcs->setup(&enc110->base, SIGNAL_TYPE_DISPLAY_PORT);
 
-       /* program correct panel mode*/
-       {
-               ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
-
-               REG_WRITE(DP_DPHY_INTERNAL_CTRL, 0x0);
-       }
+       /* ensure normal panel mode. */
+       setup_panel_mode(enc110, DP_PANEL_MODE_DEFAULT);
 
        /* no vbid after BS (SR)
         * DP_LINK_FRAMING_CNTL changed history Sandra Liu
         * 11000260 / 11000104 / 110000FC */
+       REG_UPDATE_3(DP_LINK_FRAMING_CNTL,
+                       DP_IDLE_BS_INTERVAL, 0xFC,
+                       DP_VBID_DISABLE, 1,
+                       DP_VID_ENHANCED_FRAME_MODE, 1);
 
-       /* TODO DP_LINK_FRAMING_CNTL should always use hardware default value
-        * output  except output hbr2_compliance pattern for physical PHY
-        * measurement. This is not normal usage case. SW should reset this
-        * register to hardware default value after end use of HBR2 eye
-        */
-       BREAK_TO_DEBUGGER();
-       /* TODO: do we still need this, find out at compliance test
-       addr = mmDP_LINK_FRAMING_CNTL + fe_addr_offset;
-
-       value = dal_read_reg(ctx, addr);
-
-       set_reg_field_value(value, 0xFC,
-                       DP_LINK_FRAMING_CNTL, DP_IDLE_BS_INTERVAL);
-       set_reg_field_value(value, 1,
-                       DP_LINK_FRAMING_CNTL, DP_VBID_DISABLE);
-       set_reg_field_value(value, 1,
-                       DP_LINK_FRAMING_CNTL, DP_VID_ENHANCED_FRAME_MODE);
-
-       dal_write_reg(ctx, addr, value);
-        */
        /* swap every BS with SR */
-
        REG_UPDATE(DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_BS_COUNT, 0);
 
-       /*TODO add support for this test pattern
-        * support_dp_hbr2_eye_pattern
-        */
+       /* select cp2520 pattern 2 */
+       if (REG(DP_DPHY_HBR2_PATTERN_CONTROL))
+               REG_UPDATE(DP_DPHY_HBR2_PATTERN_CONTROL,
+                               DP_DPHY_HBR2_PATTERN_CONTROL, 0x2);
 
        /* set link training complete */
        set_link_training_complete(enc110, true);
-       /* do not enable video stream */
 
+       /* disable video stream */
        REG_UPDATE(DP_VID_STREAM_CNTL, DP_VID_STREAM_ENABLE, 0);
 
        /* Disable PHY Bypass mode to setup the test pattern */
-
        enable_phy_bypass_mode(enc110, false);
 }
 
@@ -448,41 +427,26 @@ static void set_dp_phy_pattern_passthrough_mode(
        struct dce110_link_encoder *enc110,
        enum dp_panel_mode panel_mode)
 {
-       uint32_t value;
-
        /* program correct panel mode */
-       {
-               ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
-               value = REG_READ(DP_DPHY_INTERNAL_CTRL);
+       setup_panel_mode(enc110, panel_mode);
 
-               switch (panel_mode) {
-               case DP_PANEL_MODE_EDP:
-                       value = 0x1;
-               break;
-               case DP_PANEL_MODE_SPECIAL:
-                       value = 0x11;
-               break;
-               default:
-                       value = 0x0;
-                       break;
-               }
-
-               REG_WRITE(DP_DPHY_INTERNAL_CTRL, value);
-       }
+       /* restore LINK_FRAMING_CNTL and DPHY_SCRAMBLER_BS_COUNT
+        * in case we were doing HBR2 compliance pattern before
+        */
+       REG_UPDATE_3(DP_LINK_FRAMING_CNTL,
+                       DP_IDLE_BS_INTERVAL, 0x2000,
+                       DP_VBID_DISABLE, 0,
+                       DP_VID_ENHANCED_FRAME_MODE, 1);
 
        REG_UPDATE(DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_BS_COUNT, 0x1FF);
 
        /* set link training complete */
-
        set_link_training_complete(enc110, true);
 
        /* Disable PHY Bypass mode to setup the test pattern */
-
        enable_phy_bypass_mode(enc110, false);
 
-       /* Disable PRBS mode,
-        * make sure DPHY_PRBS_CNTL.DPHY_PRBS_EN=0 */
-
+       /* Disable PRBS mode */
        disable_prbs_mode(enc110);
 }
 
@@ -828,8 +792,7 @@ static void link_encoder_disable(struct dce110_link_encoder *enc110)
        REG_UPDATE(DP_LINK_CNTL, DP_LINK_TRAINING_COMPLETE, 0);
 
        /* reset panel mode */
-       ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
-       REG_WRITE(DP_DPHY_INTERNAL_CTRL, 0);
+       setup_panel_mode(enc110, DP_PANEL_MODE_DEFAULT);
 }
 
 static void hpd_initialize(
@@ -1433,7 +1396,7 @@ void dce110_link_encoder_dp_set_phy_pattern(
                        enc110, param->custom_pattern);
                break;
        case DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE:
-               set_dp_phy_pattern_hbr2_compliance(enc110);
+               set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc110);
                break;
        case DP_TEST_PATTERN_VIDEO_MODE: {
                set_dp_phy_pattern_passthrough_mode(

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h
index 25ba583dbb8f8000eff12338f6865a4f9afdcff5..4e0b5d9653557e04b16725387556426fd5156fc9 100644 (file)
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h
@@ -78,22 +78,29 @@
        SRI(DP_DPHY_INTERNAL_CTRL, DP, id), \
        SR(DCI_MEM_PWR_STATUS)
 
+#define LE_DCE100_REG_LIST(id)\
+       LE_COMMON_REG_LIST_BASE(id), \
+       SRI(DP_DPHY_BS_SR_SWAP_CNTL, DP, id), \
+       SRI(DP_DPHY_INTERNAL_CTRL, DP, id), \
+       SR(DCI_MEM_PWR_STATUS)
+
 #define LE_DCE110_REG_LIST(id)\
        LE_COMMON_REG_LIST_BASE(id), \
        SRI(DP_DPHY_BS_SR_SWAP_CNTL, DP, id), \
        SRI(DP_DPHY_INTERNAL_CTRL, DP, id), \
+       SRI(DP_DPHY_HBR2_PATTERN_CONTROL, DP, id), \
        SR(DCI_MEM_PWR_STATUS)
 
 #define LE_DCE120_REG_LIST(id)\
        LE_COMMON_REG_LIST_BASE(id), \
        SRI(DP_DPHY_BS_SR_SWAP_CNTL, DP, id), \
+       SRI(DP_DPHY_HBR2_PATTERN_CONTROL, DP, id), \
        SR(DCI_MEM_PWR_STATUS)
 
 #define LE_DCE80_REG_LIST(id)\
        SRI(DP_DPHY_INTERNAL_CTRL, DP, id), \
        LE_COMMON_REG_LIST_BASE(id)
 
-
 struct dce110_link_enc_aux_registers {
        uint32_t AUX_CONTROL;
        uint32_t AUX_DPHY_RX_CONTROL0;
@@ -144,6 +151,7 @@ struct dce110_link_enc_registers {
        uint32_t DP_VID_STREAM_CNTL;
        uint32_t DP_DPHY_FAST_TRAINING;
        uint32_t DP_DPHY_BS_SR_SWAP_CNTL;
+       uint32_t DP_DPHY_HBR2_PATTERN_CONTROL;
        uint32_t DP_SEC_CNTL1;
 };
 

diff --git a/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c b/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c
index c72858a1452f188a3f89262237471aec8738c65d..b6f77f88be9c5aa064daa9bbb691f8f5081b8f28 100644 (file)
--- a/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c
@@ -265,7 +265,7 @@ static const struct dce110_link_enc_hpd_registers link_enc_hpd_regs[] = {
 
 #define link_regs(id)\
 [id] = {\
-       LE_DCE110_REG_LIST(id)\
+       LE_DCE100_REG_LIST(id)\
 }
 
 static const struct dce110_link_enc_registers link_enc_regs[] = {