rtc: ds1307: fix alignments and blank lines

Alignment should always match open parenthesis.
Also remove two unnecessary blank lines

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 5b2fe3579e455c511f4754052708fe40f26561c7..bac0f9ec935127c8d28d523d1132b3418540e2d9 100644 (file)
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -51,7 +51,6 @@ enum ds_type {
        /* rs5c372 too?  different address... */
 };
 
-
 /* RTC registers don't differ much, except for the century flag */
 #define DS1307_REG_SECS                0x00    /* 00-59 */
 #      define DS1307_BIT_CH            0x80
@@ -114,7 +113,6 @@ enum ds_type {
 #      define RX8025_BIT_VDET          0x40
 #      define RX8025_BIT_XST           0x20
 
-
 struct ds1307 {
        struct nvmem_config     nvmem_cfg;
        enum ds_type            type;
@@ -1042,7 +1040,7 @@ static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
 }
 
 static ssize_t ds3231_hwmon_show_temp(struct device *dev,
-                               struct device_attribute *attr, char *buf)
+                                     struct device_attribute *attr, char *buf)
 {
        int ret;
        s32 temp;
@@ -1054,7 +1052,7 @@ static ssize_t ds3231_hwmon_show_temp(struct device *dev,
        return sprintf(buf, "%d\n", temp);
 }
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ds3231_hwmon_show_temp,
-                       NULL, 0);
+                         NULL, 0);
 
 static struct attribute *ds3231_hwmon_attrs[] = {
        &sensor_dev_attr_temp1_input.dev_attr.attr,
@@ -1070,7 +1068,8 @@ static void ds1307_hwmon_register(struct ds1307 *ds1307)
                return;
 
        dev = devm_hwmon_device_register_with_groups(ds1307->dev, ds1307->name,
-                                               ds1307, ds3231_hwmon_groups);
+                                                    ds1307,
+                                                    ds3231_hwmon_groups);
        if (IS_ERR(dev)) {
                dev_warn(ds1307->dev, "unable to register hwmon device %ld\n",
                         PTR_ERR(dev));
@@ -1142,7 +1141,7 @@ static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
 }
 
 static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
-                                       unsigned long *prate)
+                                     unsigned long *prate)
 {
        int i;
 
@@ -1155,7 +1154,7 @@ static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
 }
 
 static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
-                                       unsigned long parent_rate)
+                                  unsigned long parent_rate)
 {
        struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
        int control = 0;
@@ -1215,7 +1214,7 @@ static const struct clk_ops ds3231_clk_sqw_ops = {
 };
 
 static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
-                                               unsigned long parent_rate)
+                                                 unsigned long parent_rate)
 {
        return 32768;
 }
@@ -1306,7 +1305,7 @@ static int ds3231_clks_register(struct ds1307 *ds1307)
 
                /* optional override of the clockname */
                of_property_read_string_index(node, "clock-output-names", i,
-                                               &init.name);
+                                             &init.name);
                ds1307->clks[i].init = &init;
 
                onecell->clks[i] = devm_clk_register(ds1307->dev,
@@ -1570,8 +1569,8 @@ static int ds1307_probe(struct i2c_client *client,
                /* oscillator fault?  clear flag, and warn */
                if (regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
                        regmap_write(ds1307->regmap, DS1307_REG_CONTROL,
-                                       regs[DS1307_REG_CONTROL] &
-                                       ~DS1338_BIT_OSF);
+                                    regs[DS1307_REG_CONTROL] &
+                                    ~DS1338_BIT_OSF);
                        dev_warn(ds1307->dev, "SET TIME!\n");
                        goto read_rtc;
                }