ARM: dts: sun8i: r40: bananapi-m2-ultra: Add GPIO pin-bank regulator supplies

The bananapi-m2-ultra has the PMIC providing voltage to all the pin-bank
supply rails from its various regulator outputs, tie them to the pio
node.

Signed-off-by: Pablo Greco <pgreco@centosproject.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index c488aaacbd68b087d2dec9e936e13d40d6a8458a..699579d431052d52f779bca0f8c65f1b82ba3e2c 100644 (file)
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -201,6 +201,12 @@ &ohci2 {
 &pio {
        pinctrl-names = "default";
        pinctrl-0 = <&clk_out_a_pin>;
+       vcc-pa-supply = <&reg_aldo2>;
+       vcc-pc-supply = <&reg_dcdc1>;
+       vcc-pd-supply = <&reg_dcdc1>;
+       vcc-pe-supply = <&reg_eldo1>;
+       vcc-pf-supply = <&reg_dcdc1>;
+       vcc-pg-supply = <&reg_dldo1>;
 };
 
 &reg_aldo2 {