ARM: dts: imx6qdl-cubox-i: update GPIO specification

Fabio Estevam suggested using GPIO_ACTIVE_HIGH in the gpio specification
for the USB regulators.  Change them to conform.

Suggested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index ca04ec56d2af21ea30d71ff49ec2d006cfbba2d6..d1cfdc264126997756e2ebe2651cdabff167bc65 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -73,7 +73,7 @@ v_5v0: regulator-v-5v0 {
        v_usb2: regulator-v-usb2 {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio1 0 0>;
+               gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
                regulator-max-microvolt = <5000000>;
@@ -85,7 +85,7 @@ v_usb2: regulator-v-usb2 {
        v_usb1: regulator-v-usb1 {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio3 22 0>;
+               gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
                regulator-max-microvolt = <5000000>;