u8 uniform_erase_type;
};
+/**
+ * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
+ * supported by the SPI controller (bus master).
+ * @mask: the bitmask listing all the supported hw capabilies
+ */
+struct spi_nor_hwcaps {
+ u32 mask;
+};
+
+/*
+ *(Fast) Read capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * As a matter of performances, it is relevant to use Octal SPI protocols first,
+ * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
+ * (Slow) Read.
+ */
+#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0)
+#define SNOR_HWCAPS_READ BIT(0)
+#define SNOR_HWCAPS_READ_FAST BIT(1)
+#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2)
+
+#define SNOR_HWCAPS_READ_DUAL GENMASK(6, 3)
+#define SNOR_HWCAPS_READ_1_1_2 BIT(3)
+#define SNOR_HWCAPS_READ_1_2_2 BIT(4)
+#define SNOR_HWCAPS_READ_2_2_2 BIT(5)
+#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(6)
+
+#define SNOR_HWCAPS_READ_QUAD GENMASK(10, 7)
+#define SNOR_HWCAPS_READ_1_1_4 BIT(7)
+#define SNOR_HWCAPS_READ_1_4_4 BIT(8)
+#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
+#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
+
+#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11)
+#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
+#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
+#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
+#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14)
+
+/*
+ * Page Program capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * Like (Fast) Read capabilities, Octal/Quad SPI protocols are preferred to the
+ * legacy SPI 1-1-1 protocol.
+ * Note that Dual Page Programs are not supported because there is no existing
+ * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
+ * implements such commands.
+ */
+#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16)
+#define SNOR_HWCAPS_PP BIT(16)
+
+#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17)
+#define SNOR_HWCAPS_PP_1_1_4 BIT(17)
+#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
+#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
+
+#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20)
+#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
+#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
+#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
+
+#define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \
+ SNOR_HWCAPS_READ_4_4_4 | \
+ SNOR_HWCAPS_READ_8_8_8 | \
+ SNOR_HWCAPS_PP_4_4_4 | \
+ SNOR_HWCAPS_PP_8_8_8)
+
+#define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \
+ SNOR_HWCAPS_READ_1_2_2_DTR | \
+ SNOR_HWCAPS_READ_1_4_4_DTR | \
+ SNOR_HWCAPS_READ_1_8_8_DTR)
+
+#define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \
+ SNOR_HWCAPS_PP_MASK)
+
+struct spi_nor_read_command {
+ u8 num_mode_clocks;
+ u8 num_wait_states;
+ u8 opcode;
+ enum spi_nor_protocol proto;
+};
+
+struct spi_nor_pp_command {
+ u8 opcode;
+ enum spi_nor_protocol proto;
+};
+
+enum spi_nor_read_command_index {
+ SNOR_CMD_READ,
+ SNOR_CMD_READ_FAST,
+ SNOR_CMD_READ_1_1_1_DTR,
+
+ /* Dual SPI */
+ SNOR_CMD_READ_1_1_2,
+ SNOR_CMD_READ_1_2_2,
+ SNOR_CMD_READ_2_2_2,
+ SNOR_CMD_READ_1_2_2_DTR,
+
+ /* Quad SPI */
+ SNOR_CMD_READ_1_1_4,
+ SNOR_CMD_READ_1_4_4,
+ SNOR_CMD_READ_4_4_4,
+ SNOR_CMD_READ_1_4_4_DTR,
+
+ /* Octal SPI */
+ SNOR_CMD_READ_1_1_8,
+ SNOR_CMD_READ_1_8_8,
+ SNOR_CMD_READ_8_8_8,
+ SNOR_CMD_READ_1_8_8_DTR,
+
+ SNOR_CMD_READ_MAX
+};
+
+enum spi_nor_pp_command_index {
+ SNOR_CMD_PP,
+
+ /* Quad SPI */
+ SNOR_CMD_PP_1_1_4,
+ SNOR_CMD_PP_1_4_4,
+ SNOR_CMD_PP_4_4_4,
+
+ /* Octal SPI */
+ SNOR_CMD_PP_1_1_8,
+ SNOR_CMD_PP_1_8_8,
+ SNOR_CMD_PP_8_8_8,
+
+ SNOR_CMD_PP_MAX
+};
+
+/* Forward declaration that will be used in 'struct spi_nor_flash_parameter' */
+struct spi_nor;
+
+/**
+ * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
+ * Includes legacy flash parameters and settings that can be overwritten
+ * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
+ * Serial Flash Discoverable Parameters (SFDP) tables.
+ *
+ * @size: the flash memory density in bytes.
+ * @page_size: the page size of the SPI NOR flash memory.
+ * @hwcaps: describes the read and page program hardware
+ * capabilities.
+ * @reads: read capabilities ordered by priority: the higher index
+ * in the array, the higher priority.
+ * @page_programs: page program capabilities ordered by priority: the
+ * higher index in the array, the higher priority.
+ * @quad_enable: enables SPI NOR quad mode.
+ */
+struct spi_nor_flash_parameter {
+ u64 size;
+ u32 page_size;
+
+ struct spi_nor_hwcaps hwcaps;
+ struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
+ struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
+
+ int (*quad_enable)(struct spi_nor *nor);
+};
+
/**
* struct flash_info - Forward declaration of a structure used internally by
* spi_nor_scan()
* @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode
* @clear_sr_bp: [FLASH-SPECIFIC] clears the Block Protection Bits from
* the SPI NOR Status Register.
+ * @params: [FLASH-SPECIFIC] SPI-NOR flash parameters and settings.
+ * The structure includes legacy flash parameters and
+ * settings that can be overwritten by the spi_nor_fixups
+ * hooks, or dynamically when parsing the SFDP tables.
* @priv: the private data
*/
struct spi_nor {
int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*quad_enable)(struct spi_nor *nor);
int (*clear_sr_bp)(struct spi_nor *nor);
+ struct spi_nor_flash_parameter params;
void *priv;
};
return mtd_get_of_node(&nor->mtd);
}
-/**
- * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
- * supported by the SPI controller (bus master).
- * @mask: the bitmask listing all the supported hw capabilies
- */
-struct spi_nor_hwcaps {
- u32 mask;
-};
-
-/*
- *(Fast) Read capabilities.
- * MUST be ordered by priority: the higher bit position, the higher priority.
- * As a matter of performances, it is relevant to use Octal SPI protocols first,
- * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
- * (Slow) Read.
- */
-#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0)
-#define SNOR_HWCAPS_READ BIT(0)
-#define SNOR_HWCAPS_READ_FAST BIT(1)
-#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2)
-
-#define SNOR_HWCAPS_READ_DUAL GENMASK(6, 3)
-#define SNOR_HWCAPS_READ_1_1_2 BIT(3)
-#define SNOR_HWCAPS_READ_1_2_2 BIT(4)
-#define SNOR_HWCAPS_READ_2_2_2 BIT(5)
-#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(6)
-
-#define SNOR_HWCAPS_READ_QUAD GENMASK(10, 7)
-#define SNOR_HWCAPS_READ_1_1_4 BIT(7)
-#define SNOR_HWCAPS_READ_1_4_4 BIT(8)
-#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
-#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
-
-#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11)
-#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
-#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
-#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
-#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14)
-
-/*
- * Page Program capabilities.
- * MUST be ordered by priority: the higher bit position, the higher priority.
- * Like (Fast) Read capabilities, Octal/Quad SPI protocols are preferred to the
- * legacy SPI 1-1-1 protocol.
- * Note that Dual Page Programs are not supported because there is no existing
- * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
- * implements such commands.
- */
-#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16)
-#define SNOR_HWCAPS_PP BIT(16)
-
-#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17)
-#define SNOR_HWCAPS_PP_1_1_4 BIT(17)
-#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
-#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
-
-#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20)
-#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
-#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
-#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
-
-#define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \
- SNOR_HWCAPS_READ_4_4_4 | \
- SNOR_HWCAPS_READ_8_8_8 | \
- SNOR_HWCAPS_PP_4_4_4 | \
- SNOR_HWCAPS_PP_8_8_8)
-
-#define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \
- SNOR_HWCAPS_READ_1_2_2_DTR | \
- SNOR_HWCAPS_READ_1_4_4_DTR | \
- SNOR_HWCAPS_READ_1_8_8_DTR)
-
-#define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \
- SNOR_HWCAPS_PP_MASK)
-
/**
* spi_nor_scan() - scan the SPI NOR
* @nor: the spi_nor structure