ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain

Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.  Notable
exceptions are the "display" and "sound" nodes, which represent multiple
SoC devices, each having their own MSTP clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 5b2952d5c700fabe833587c4372171a869757d36..a0b2a79cbfbdf0b42286dea205fe6751fdaf57f6 100644 (file)
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -134,6 +134,7 @@ gpio0: gpio@e6050000 {
                #interrupt-cells = <2>;
                interrupt-controller;
                clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
+               power-domains = <&cpg_clocks>;
        };
 
        gpio1: gpio@e6051000 {
@@ -146,6 +147,7 @@ gpio1: gpio@e6051000 {
                #interrupt-cells = <2>;
                interrupt-controller;
                clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
+               power-domains = <&cpg_clocks>;
        };
 
        gpio2: gpio@e6052000 {
@@ -158,6 +160,7 @@ gpio2: gpio@e6052000 {
                #interrupt-cells = <2>;
                interrupt-controller;
                clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
+               power-domains = <&cpg_clocks>;
        };
 
        gpio3: gpio@e6053000 {
@@ -170,6 +173,7 @@ gpio3: gpio@e6053000 {
                #interrupt-cells = <2>;
                interrupt-controller;
                clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
+               power-domains = <&cpg_clocks>;
        };
 
        gpio4: gpio@e6054000 {
@@ -182,6 +186,7 @@ gpio4: gpio@e6054000 {
                #interrupt-cells = <2>;
                interrupt-controller;
                clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
+               power-domains = <&cpg_clocks>;
        };
 
        gpio5: gpio@e6055000 {
@@ -194,6 +199,7 @@ gpio5: gpio@e6055000 {
                #interrupt-cells = <2>;
                interrupt-controller;
                clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
+               power-domains = <&cpg_clocks>;
        };
 
        thermal@e61f0000 {
@@ -201,6 +207,7 @@ thermal@e61f0000 {
                reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
                interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+               power-domains = <&cpg_clocks>;
        };
 
        timer {
@@ -218,6 +225,7 @@ cmt0: timer@ffca0000 {
                             <0 143 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
                clock-names = "fck";
+               power-domains = <&cpg_clocks>;
 
                renesas,channels-mask = <0x60>;
 
@@ -237,6 +245,7 @@ cmt1: timer@e6130000 {
                             <0 127 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
                clock-names = "fck";
+               power-domains = <&cpg_clocks>;
 
                renesas,channels-mask = <0xff>;
 
@@ -253,6 +262,7 @@ irqc0: interrupt-controller@e61c0000 {
                             <0 2 IRQ_TYPE_LEVEL_HIGH>,
                             <0 3 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
+               power-domains = <&cpg_clocks>;
        };
 
        dmac0: dma-controller@e6700000 {
@@ -281,6 +291,7 @@ dmac0: dma-controller@e6700000 {
                                "ch12", "ch13", "ch14";
                clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
                clock-names = "fck";
+               power-domains = <&cpg_clocks>;
                #dma-cells = <1>;
                dma-channels = <15>;
        };
@@ -311,6 +322,7 @@ dmac1: dma-controller@e6720000 {
                                "ch12", "ch13", "ch14";
                clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
                clock-names = "fck";
+               power-domains = <&cpg_clocks>;
                #dma-cells = <1>;
                dma-channels = <15>;
        };
@@ -339,6 +351,7 @@ audma0: dma-controller@ec700000 {
                                "ch12";
                clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
                clock-names = "fck";
+               power-domains = <&cpg_clocks>;
                #dma-cells = <1>;
                dma-channels = <13>;
        };
@@ -367,6 +380,7 @@ audma1: dma-controller@ec720000 {
                                "ch12";
                clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
                clock-names = "fck";
+               power-domains = <&cpg_clocks>;
                #dma-cells = <1>;
                dma-channels = <13>;
        };
@@ -378,6 +392,7 @@ usb_dmac0: dma-controller@e65a0000 {
                              0 109 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-names = "ch0", "ch1";
                clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+               power-domains = <&cpg_clocks>;
                #dma-cells = <1>;
                dma-channels = <2>;
        };
@@ -389,6 +404,7 @@ usb_dmac1: dma-controller@e65b0000 {
                              0 110 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-names = "ch0", "ch1";
                clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+               power-domains = <&cpg_clocks>;
                #dma-cells = <1>;
                dma-channels = <2>;
        };
@@ -400,6 +416,7 @@ i2c0: i2c@e6508000 {
                reg = <0 0xe6508000 0 0x40>;
                interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -410,6 +427,7 @@ i2c1: i2c@e6518000 {
                reg = <0 0xe6518000 0 0x40>;
                interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -420,6 +438,7 @@ i2c2: i2c@e6530000 {
                reg = <0 0xe6530000 0 0x40>;
                interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -430,6 +449,7 @@ i2c3: i2c@e6540000 {
                reg = <0 0xe6540000 0 0x40>;
                interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -442,6 +462,7 @@ iic0: i2c@e6500000 {
                clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
                dmas = <&dmac0 0x61>, <&dmac0 0x62>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -454,6 +475,7 @@ iic1: i2c@e6510000 {
                clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
                dmas = <&dmac0 0x65>, <&dmac0 0x66>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -466,6 +488,7 @@ iic2: i2c@e6520000 {
                clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
                dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -478,6 +501,7 @@ iic3: i2c@e60b0000 {
                clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
                dmas = <&dmac0 0x77>, <&dmac0 0x78>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -488,6 +512,7 @@ mmcif0: mmc@ee200000 {
                clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
                dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                reg-io-width = <4>;
                status = "disabled";
                max-frequency = <97500000>;
@@ -500,6 +525,7 @@ mmcif1: mmc@ee220000 {
                clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
                dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                reg-io-width = <4>;
                status = "disabled";
                max-frequency = <97500000>;
@@ -517,6 +543,7 @@ sdhi0: sd@ee100000 {
                clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
                dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -527,6 +554,7 @@ sdhi1: sd@ee120000 {
                clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
                dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -537,6 +565,7 @@ sdhi2: sd@ee140000 {
                clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
                dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -547,6 +576,7 @@ sdhi3: sd@ee160000 {
                clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
                dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -558,6 +588,7 @@ scifa0: serial@e6c40000 {
                clock-names = "sci_ick";
                dmas = <&dmac0 0x21>, <&dmac0 0x22>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -569,6 +600,7 @@ scifa1: serial@e6c50000 {
                clock-names = "sci_ick";
                dmas = <&dmac0 0x25>, <&dmac0 0x26>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -580,6 +612,7 @@ scifa2: serial@e6c60000 {
                clock-names = "sci_ick";
                dmas = <&dmac0 0x27>, <&dmac0 0x28>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -591,6 +624,7 @@ scifb0: serial@e6c20000 {
                clock-names = "sci_ick";
                dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -602,6 +636,7 @@ scifb1: serial@e6c30000 {
                clock-names = "sci_ick";
                dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -613,6 +648,7 @@ scifb2: serial@e6ce0000 {
                clock-names = "sci_ick";
                dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -624,6 +660,7 @@ scif0: serial@e6e60000 {
                clock-names = "sci_ick";
                dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -635,6 +672,7 @@ scif1: serial@e6e68000 {
                clock-names = "sci_ick";
                dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -646,6 +684,7 @@ hscif0: serial@e62c0000 {
                clock-names = "sci_ick";
                dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -657,6 +696,7 @@ hscif1: serial@e62c8000 {
                clock-names = "sci_ick";
                dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -665,6 +705,7 @@ ether: ethernet@ee700000 {
                reg = <0 0xee700000 0 0x400>;
                interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+               power-domains = <&cpg_clocks>;
                phy-mode = "rmii";
                #address-cells = <1>;
                #size-cells = <0>;
@@ -676,6 +717,7 @@ avb: ethernet@e6800000 {
                reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
                interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
+               power-domains = <&cpg_clocks>;
                #address-cells = <1>;
                #size-cells = <0>;
                status = "disabled";
@@ -686,6 +728,7 @@ sata0: sata@ee300000 {
                reg = <0 0xee300000 0 0x2000>;
                interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -694,6 +737,7 @@ sata1: sata@ee500000 {
                reg = <0 0xee500000 0 0x2000>;
                interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -702,12 +746,13 @@ hsusb: usb@e6590000 {
                reg = <0 0xe6590000 0 0x100>;
                interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
-               renesas,buswait = <4>;
-               phys = <&usb0 1>;
-               phy-names = "usb";
                dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
                       <&usb_dmac1 0>, <&usb_dmac1 1>;
                dma-names = "ch0", "ch1", "ch2", "ch3";
+               power-domains = <&cpg_clocks>;
+               renesas,buswait = <4>;
+               phys = <&usb0 1>;
+               phy-names = "usb";
                status = "disabled";
        };
 
@@ -718,6 +763,7 @@ usbphy: usb-phy@e6590100 {
                #size-cells = <0>;
                clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
                clock-names = "usbhs";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
 
                usb0: usb-channel@0 {
@@ -732,33 +778,37 @@ usb2: usb-channel@2 {
 
        vin0: video@e6ef0000 {
                compatible = "renesas,vin-r8a7790";
-               clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
                reg = <0 0xe6ef0000 0 0x1000>;
                interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
        vin1: video@e6ef1000 {
                compatible = "renesas,vin-r8a7790";
-               clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
                reg = <0 0xe6ef1000 0 0x1000>;
                interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
        vin2: video@e6ef2000 {
                compatible = "renesas,vin-r8a7790";
-               clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
                reg = <0 0xe6ef2000 0 0x1000>;
                interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
        vin3: video@e6ef3000 {
                compatible = "renesas,vin-r8a7790";
-               clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
                reg = <0 0xe6ef3000 0 0x1000>;
                interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -767,6 +817,7 @@ vsp1@fe920000 {
                reg = <0 0xfe920000 0 0x8000>;
                interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+               power-domains = <&cpg_clocks>;
 
                renesas,has-sru;
                renesas,#rpf = <5>;
@@ -779,6 +830,7 @@ vsp1@fe928000 {
                reg = <0 0xfe928000 0 0x8000>;
                interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+               power-domains = <&cpg_clocks>;
 
                renesas,has-lut;
                renesas,has-sru;
@@ -792,6 +844,7 @@ vsp1@fe930000 {
                reg = <0 0xfe930000 0 0x8000>;
                interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+               power-domains = <&cpg_clocks>;
 
                renesas,has-lif;
                renesas,has-lut;
@@ -805,6 +858,7 @@ vsp1@fe938000 {
                reg = <0 0xfe938000 0 0x8000>;
                interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+               power-domains = <&cpg_clocks>;
 
                renesas,has-lif;
                renesas,has-lut;
@@ -859,6 +913,7 @@ can0: can@e6e80000 {
                clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
                         <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
                clock-names = "clkp1", "clkp2", "can_clk";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -869,6 +924,7 @@ can1: can@e6e88000 {
                clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
                         <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
                clock-names = "clkp1", "clkp2", "can_clk";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };
 
@@ -877,6 +933,7 @@ jpu: jpeg-codec@fe980000 {
                reg = <0 0xfe980000 0 0x10300>;
                interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp1_clks R8A7790_CLK_JPU>;
+               power-domains = <&cpg_clocks>;
        };
 
        clocks {
@@ -953,6 +1010,7 @@ cpg_clocks: cpg_clocks@e6150000 {
                        clock-output-names = "main", "pll0", "pll1", "pll3",
                                             "lb", "qspi", "sdh", "sd0", "sd1",
                                             "z", "rcan", "adsp";
+                       #power-domain-cells = <0>;
                };
 
                /* Variable factor clocks */
@@ -1343,6 +1401,7 @@ qspi: spi@e6b10000 {
                clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
                dmas = <&dmac0 0x17>, <&dmac0 0x18>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                num-cs = <1>;
                #address-cells = <1>;
                #size-cells = <0>;
@@ -1356,6 +1415,7 @@ msiof0: spi@e6e20000 {
                clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
                dmas = <&dmac0 0x51>, <&dmac0 0x52>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                #address-cells = <1>;
                #size-cells = <0>;
                status = "disabled";
@@ -1368,6 +1428,7 @@ msiof1: spi@e6e10000 {
                clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
                dmas = <&dmac0 0x55>, <&dmac0 0x56>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                #address-cells = <1>;
                #size-cells = <0>;
                status = "disabled";
@@ -1380,6 +1441,7 @@ msiof2: spi@e6e00000 {
                clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
                dmas = <&dmac0 0x41>, <&dmac0 0x42>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                #address-cells = <1>;
                #size-cells = <0>;
                status = "disabled";
@@ -1392,6 +1454,7 @@ msiof3: spi@e6c90000 {
                clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
                dmas = <&dmac0 0x45>, <&dmac0 0x46>;
                dma-names = "tx", "rx";
+               power-domains = <&cpg_clocks>;
                #address-cells = <1>;
                #size-cells = <0>;
                status = "disabled";
@@ -1402,6 +1465,7 @@ xhci: usb@ee000000 {
                reg = <0 0xee000000 0 0xc00>;
                interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+               power-domains = <&cpg_clocks>;
                phys = <&usb2 1>;
                phy-names = "usb";
                status = "disabled";
@@ -1410,10 +1474,11 @@ xhci: usb@ee000000 {
        pci0: pci@ee090000 {
                compatible = "renesas,pci-r8a7790";
                device_type = "pci";
-               clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
                reg = <0 0xee090000 0 0xc00>,
                      <0 0xee080000 0 0x1100>;
                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
 
                bus-range = <0 0>;
@@ -1444,10 +1509,11 @@ usb@0,2 {
        pci1: pci@ee0b0000 {
                compatible = "renesas,pci-r8a7790";
                device_type = "pci";
-               clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
                reg = <0 0xee0b0000 0 0xc00>,
                      <0 0xee0a0000 0 0x1100>;
                interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+               power-domains = <&cpg_clocks>;
                status = "disabled";
 
                bus-range = <1 1>;
@@ -1465,6 +1531,7 @@ pci2: pci@ee0d0000 {
                compatible = "renesas,pci-r8a7790";
                device_type = "pci";
                clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+               power-domains = <&cpg_clocks>;
                reg = <0 0xee0d0000 0 0xc00>,
                      <0 0xee0c0000 0 0x1100>;
                interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
@@ -1517,6 +1584,7 @@ pciec: pcie@fe000000 {
                interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
                clock-names = "pcie", "pcie_bus";
+               power-domains = <&cpg_clocks>;
                status = "disabled";
        };