ARM: dts: bcm283x: Remove simple-bus from fixed clocks

The fixed clocks doesn't form some kind of bus. So let's remove it.
This fixes the follow DT schema warnings:

clocks: clock@3:reg:0: [3] is too short
clocks: clock@4:reg:0: [4] is too short
clocks: $nodename:0: 'clocks' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: 'ranges' is a required property
clock@3: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
clock@4: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 2d191fcbc2cc16b64c226c3b11992bda2e83f757..f16899d096c349776d5acc0bed74e7aebbb969dd 100644 (file)
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -650,22 +650,16 @@ vc4: gpu {
        };
 
        clocks {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
                /* The oscillator is the root of the clock tree. */
-               clk_osc: clock@3 {
+               clk_osc: clk-osc {
                        compatible = "fixed-clock";
-                       reg = <3>;
                        #clock-cells = <0>;
                        clock-output-names = "osc";
                        clock-frequency = <19200000>;
                };
 
-               clk_usb: clock@4 {
+               clk_usb: clk-usb {
                        compatible = "fixed-clock";
-                       reg = <4>;
                        #clock-cells = <0>;
                        clock-output-names = "otg";
                        clock-frequency = <480000000>;