ARM: dts: imx6ul-isiot: Add FEC node support

Add support for fec1 node on Engicam Is.IoT variant boards.

Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index e2dacdcef39a905d81386b828402a9915e94fc1e..950fb28b630a4dc88ee1f28840dab90317f01c83 100644 (file)
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -115,6 +115,24 @@ dailink_master: simple-audio-card,codec {
        };
 };
 
+&fec1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet1>;
+       phy-mode = "rmii";
+       phy-handle = <&ethphy0>;
+       status = "okay";
+
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               ethphy0: ethernet-phy@0 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <0>;
+               };
+       };
+};
+
 &i2c1 {
        clock-frequency = <100000>;
        pinctrl-names = "default";
@@ -227,6 +245,21 @@ &usdhc1 {
 };
 
 &iomuxc {
+       pinctrl_enet1: enet1grp {
+               fsl,pins = <
+                       MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO    0x1b0b0
+                       MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC     0x1b0b0
+                       MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+                       MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+                       MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+                       MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
+                       MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10       0x1b0b0
+               >;
+       };
+
        pinctrl_i2c1: i2c1grp {
                fsl,pins = <
                        MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0