]> asedeno.scripts.mit.edu Git - linux.git/commitdiff
mei: wd: drop AGAIN the watchdog code from the core mei driver
authorTomas Winkler <tomas.winkler@intel.com>
Mon, 8 Feb 2016 22:00:17 +0000 (00:00 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 10 Feb 2016 01:31:50 +0000 (17:31 -0800)
The file wd.c was remove from the driver by commit
commit fdd9b8655933 ("mei: wd: drop the watchdog code from the core mei
driver")

Unfortunately it came back by mistake in rebasing in the commit
commit 06ee536bcb15 ("mei: fill file pointer in read cb for fixed
address client")

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/misc/mei/wd.c [deleted file]

diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
deleted file mode 100644 (file)
index 7d9b4ee..0000000
+++ /dev/null
@@ -1,391 +0,0 @@
-/*
- *
- * Intel Management Engine Interface (Intel MEI) Linux driver
- * Copyright (c) 2003-2012, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/sched.h>
-#include <linux/watchdog.h>
-
-#include <linux/mei.h>
-
-#include "mei_dev.h"
-#include "hbm.h"
-#include "client.h"
-
-static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 };
-static const u8 mei_stop_wd_params[] = { 0x02, 0x02, 0x14, 0x10 };
-
-/*
- * AMT Watchdog Device
- */
-#define INTEL_AMT_WATCHDOG_ID "INTCAMT"
-
-/* UUIDs for AMT F/W clients */
-const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89,
-                                               0x9D, 0xA9, 0x15, 0x14, 0xCB,
-                                               0x32, 0xAB);
-
-static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
-{
-       dev_dbg(dev->dev, "wd: set timeout=%d.\n", timeout);
-       memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE);
-       memcpy(dev->wd_data + MEI_WD_HDR_SIZE, &timeout, sizeof(u16));
-}
-
-/**
- * mei_wd_host_init - connect to the watchdog client
- *
- * @dev: the device structure
- * @me_cl: me client
- *
- * Return: -ENOTTY if wd client cannot be found
- *         -EIO if write has failed
- *         0 on success
- */
-int mei_wd_host_init(struct mei_device *dev, struct mei_me_client *me_cl)
-{
-       struct mei_cl *cl = &dev->wd_cl;
-       int ret;
-
-       mei_cl_init(cl, dev);
-
-       dev->wd_timeout = MEI_WD_DEFAULT_TIMEOUT;
-       dev->wd_state = MEI_WD_IDLE;
-
-       ret = mei_cl_link(cl, MEI_WD_HOST_CLIENT_ID);
-       if (ret < 0) {
-               dev_info(dev->dev, "wd: failed link client\n");
-               return ret;
-       }
-
-       ret = mei_cl_connect(cl, me_cl, NULL);
-       if (ret) {
-               dev_err(dev->dev, "wd: failed to connect = %d\n", ret);
-               mei_cl_unlink(cl);
-               return ret;
-       }
-
-       ret = mei_watchdog_register(dev);
-       if (ret) {
-               mei_cl_disconnect(cl);
-               mei_cl_unlink(cl);
-       }
-       return ret;
-}
-
-/**
- * mei_wd_send - sends watch dog message to fw.
- *
- * @dev: the device structure
- *
- * Return: 0 if success,
- *     -EIO when message send fails
- *     -EINVAL when invalid message is to be sent
- *     -ENODEV on flow control failure
- */
-int mei_wd_send(struct mei_device *dev)
-{
-       struct mei_cl *cl = &dev->wd_cl;
-       struct mei_msg_hdr hdr;
-       int ret;
-
-       hdr.host_addr = cl->host_client_id;
-       hdr.me_addr = mei_cl_me_id(cl);
-       hdr.msg_complete = 1;
-       hdr.reserved = 0;
-       hdr.internal = 0;
-
-       if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE))
-               hdr.length = MEI_WD_START_MSG_SIZE;
-       else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_HDR_SIZE))
-               hdr.length = MEI_WD_STOP_MSG_SIZE;
-       else {
-               dev_err(dev->dev, "wd: invalid message is to be sent, aborting\n");
-               return -EINVAL;
-       }
-
-       ret = mei_write_message(dev, &hdr, dev->wd_data);
-       if (ret) {
-               dev_err(dev->dev, "wd: write message failed\n");
-               return ret;
-       }
-
-       ret = mei_cl_flow_ctrl_reduce(cl);
-       if (ret) {
-               dev_err(dev->dev, "wd: flow_ctrl_reduce failed.\n");
-               return ret;
-       }
-
-       return 0;
-}
-
-/**
- * mei_wd_stop - sends watchdog stop message to fw.
- *
- * @dev: the device structure
- *
- * Return: 0 if success
- * on error:
- *     -EIO    when message send fails
- *     -EINVAL when invalid message is to be sent
- *     -ETIME  on message timeout
- */
-int mei_wd_stop(struct mei_device *dev)
-{
-       struct mei_cl *cl = &dev->wd_cl;
-       int ret;
-
-       if (!mei_cl_is_connected(cl) ||
-           dev->wd_state != MEI_WD_RUNNING)
-               return 0;
-
-       memcpy(dev->wd_data, mei_stop_wd_params, MEI_WD_STOP_MSG_SIZE);
-
-       dev->wd_state = MEI_WD_STOPPING;
-
-       ret = mei_cl_flow_ctrl_creds(cl, NULL);
-       if (ret < 0)
-               goto err;
-
-       if (ret && mei_hbuf_acquire(dev)) {
-               ret = mei_wd_send(dev);
-               if (ret)
-                       goto err;
-               dev->wd_pending = false;
-       } else {
-               dev->wd_pending = true;
-       }
-
-       mutex_unlock(&dev->device_lock);
-
-       ret = wait_event_timeout(dev->wait_stop_wd,
-                               dev->wd_state == MEI_WD_IDLE,
-                               msecs_to_jiffies(MEI_WD_STOP_TIMEOUT));
-       mutex_lock(&dev->device_lock);
-       if (dev->wd_state != MEI_WD_IDLE) {
-               /* timeout */
-               ret = -ETIME;
-               dev_warn(dev->dev, "wd: stop failed to complete ret=%d\n", ret);
-               goto err;
-       }
-       dev_dbg(dev->dev, "wd: stop completed after %u msec\n",
-                       MEI_WD_STOP_TIMEOUT - jiffies_to_msecs(ret));
-       return 0;
-err:
-       return ret;
-}
-
-/**
- * mei_wd_ops_start - wd start command from the watchdog core.
- *
- * @wd_dev: watchdog device struct
- *
- * Return: 0 if success, negative errno code for failure
- */
-static int mei_wd_ops_start(struct watchdog_device *wd_dev)
-{
-       struct mei_device *dev;
-       struct mei_cl *cl;
-       int err = -ENODEV;
-
-       dev = watchdog_get_drvdata(wd_dev);
-       if (!dev)
-               return -ENODEV;
-
-       cl = &dev->wd_cl;
-
-       mutex_lock(&dev->device_lock);
-
-       if (dev->dev_state != MEI_DEV_ENABLED) {
-               dev_dbg(dev->dev, "wd: dev_state != MEI_DEV_ENABLED  dev_state = %s\n",
-                       mei_dev_state_str(dev->dev_state));
-               goto end_unlock;
-       }
-
-       if (!mei_cl_is_connected(cl)) {
-               cl_dbg(dev, cl, "MEI Driver is not connected to Watchdog Client\n");
-               goto end_unlock;
-       }
-
-       mei_wd_set_start_timeout(dev, dev->wd_timeout);
-
-       err = 0;
-end_unlock:
-       mutex_unlock(&dev->device_lock);
-       return err;
-}
-
-/**
- * mei_wd_ops_stop -  wd stop command from the watchdog core.
- *
- * @wd_dev: watchdog device struct
- *
- * Return: 0 if success, negative errno code for failure
- */
-static int mei_wd_ops_stop(struct watchdog_device *wd_dev)
-{
-       struct mei_device *dev;
-
-       dev = watchdog_get_drvdata(wd_dev);
-       if (!dev)
-               return -ENODEV;
-
-       mutex_lock(&dev->device_lock);
-       mei_wd_stop(dev);
-       mutex_unlock(&dev->device_lock);
-
-       return 0;
-}
-
-/**
- * mei_wd_ops_ping - wd ping command from the watchdog core.
- *
- * @wd_dev: watchdog device struct
- *
- * Return: 0 if success, negative errno code for failure
- */
-static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
-{
-       struct mei_device *dev;
-       struct mei_cl *cl;
-       int ret;
-
-       dev = watchdog_get_drvdata(wd_dev);
-       if (!dev)
-               return -ENODEV;
-
-       cl = &dev->wd_cl;
-
-       mutex_lock(&dev->device_lock);
-
-       if (!mei_cl_is_connected(cl)) {
-               cl_err(dev, cl, "wd: not connected.\n");
-               ret = -ENODEV;
-               goto end;
-       }
-
-       dev->wd_state = MEI_WD_RUNNING;
-
-       ret = mei_cl_flow_ctrl_creds(cl, NULL);
-       if (ret < 0)
-               goto end;
-
-       /* Check if we can send the ping to HW*/
-       if (ret && mei_hbuf_acquire(dev)) {
-               dev_dbg(dev->dev, "wd: sending ping\n");
-
-               ret = mei_wd_send(dev);
-               if (ret)
-                       goto end;
-               dev->wd_pending = false;
-       } else {
-               dev->wd_pending = true;
-       }
-
-end:
-       mutex_unlock(&dev->device_lock);
-       return ret;
-}
-
-/**
- * mei_wd_ops_set_timeout - wd set timeout command from the watchdog core.
- *
- * @wd_dev: watchdog device struct
- * @timeout: timeout value to set
- *
- * Return: 0 if success, negative errno code for failure
- */
-static int mei_wd_ops_set_timeout(struct watchdog_device *wd_dev,
-               unsigned int timeout)
-{
-       struct mei_device *dev;
-
-       dev = watchdog_get_drvdata(wd_dev);
-       if (!dev)
-               return -ENODEV;
-
-       /* Check Timeout value */
-       if (timeout < MEI_WD_MIN_TIMEOUT || timeout > MEI_WD_MAX_TIMEOUT)
-               return -EINVAL;
-
-       mutex_lock(&dev->device_lock);
-
-       dev->wd_timeout = timeout;
-       wd_dev->timeout = timeout;
-       mei_wd_set_start_timeout(dev, dev->wd_timeout);
-
-       mutex_unlock(&dev->device_lock);
-
-       return 0;
-}
-
-/*
- * Watchdog Device structs
- */
-static const struct watchdog_ops wd_ops = {
-               .owner = THIS_MODULE,
-               .start = mei_wd_ops_start,
-               .stop = mei_wd_ops_stop,
-               .ping = mei_wd_ops_ping,
-               .set_timeout = mei_wd_ops_set_timeout,
-};
-static const struct watchdog_info wd_info = {
-               .identity = INTEL_AMT_WATCHDOG_ID,
-               .options = WDIOF_KEEPALIVEPING |
-                          WDIOF_SETTIMEOUT |
-                          WDIOF_ALARMONLY,
-};
-
-static struct watchdog_device amt_wd_dev = {
-               .info = &wd_info,
-               .ops = &wd_ops,
-               .timeout = MEI_WD_DEFAULT_TIMEOUT,
-               .min_timeout = MEI_WD_MIN_TIMEOUT,
-               .max_timeout = MEI_WD_MAX_TIMEOUT,
-};
-
-
-int mei_watchdog_register(struct mei_device *dev)
-{
-
-       int ret;
-
-       amt_wd_dev.parent = dev->dev;
-       /* unlock to perserve correct locking order */
-       mutex_unlock(&dev->device_lock);
-       ret = watchdog_register_device(&amt_wd_dev);
-       mutex_lock(&dev->device_lock);
-       if (ret) {
-               dev_err(dev->dev, "wd: unable to register watchdog device = %d.\n",
-                       ret);
-               return ret;
-       }
-
-       dev_dbg(dev->dev, "wd: successfully register watchdog interface.\n");
-       watchdog_set_drvdata(&amt_wd_dev, dev);
-       return 0;
-}
-
-void mei_watchdog_unregister(struct mei_device *dev)
-{
-       if (watchdog_get_drvdata(&amt_wd_dev) == NULL)
-               return;
-
-       watchdog_set_drvdata(&amt_wd_dev, NULL);
-       watchdog_unregister_device(&amt_wd_dev);
-}
-