PCI: aardvark: Set PIO_ADDR_LS correctly in advk_pcie_rd_conf()

When setting the PIO_ADDR_LS register during a configuration read, we
were properly passing the device number, function number and register
number, but not the bus number, causing issues when reading the
configuration of PCIe devices.

Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Victor Gu <xigu@marvell.com>
Reviewed-by: Wilson Ding <dingwei@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index b72f15c99793166ea19213b0f17e5fe2b92673dc..5b8201aaf34de7311d6c5bc27814ef50690d0c2f 100644 (file)
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -172,8 +172,6 @@
 #define PCIE_CONFIG_WR_TYPE0                   0xa
 #define PCIE_CONFIG_WR_TYPE1                   0xb
 
-/* PCI_BDF shifts 8bit, so we need extra 4bit shift */
-#define PCIE_BDF(dev)                          (dev << 4)
 #define PCIE_CONF_BUS(bus)                     (((bus) & 0xff) << 20)
 #define PCIE_CONF_DEV(dev)                     (((dev) & 0x1f) << 15)
 #define PCIE_CONF_FUNC(fun)                    (((fun) & 0x7)  << 12)
@@ -456,7 +454,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
        advk_writel(pcie, reg, PIO_CTRL);
 
        /* Program the address registers */
-       reg = PCIE_BDF(devfn) | PCIE_CONF_REG(where);
+       reg = PCIE_CONF_ADDR(bus->number, devfn, where);
        advk_writel(pcie, reg, PIO_ADDR_LS);
        advk_writel(pcie, 0, PIO_ADDR_MS);