- clock-frequency : input clock frequency to non FSL_SOC cores
Optional properties:
-- gpios : specifies the gpio pins to be used for chipselects.
+- cs-gpios : specifies the gpio pins to be used for chipselects.
The gpios will be referred to as reg = <index> in the SPI child nodes.
If unspecified, a single SPI device without a chip select can be used.
- fsl,spisel_boot : for the MPC8306 and MPC8309, specifies that the
SPISEL_BOOT signal is used as chip select for a slave device. Use
reg = <number of gpios> in the corresponding child node, i.e. 0 if
- the gpios property is not present.
+ the cs-gpios property is not present.
Example:
spi@4c0 {
interrupts = <82 0>;
interrupt-parent = <700>;
mode = "cpu";
- gpios = <&gpio 18 1 // device reg=<0>
- &gpio 19 1>; // device reg=<1>
+ cs-gpios = <&gpio 18 1 // device reg=<0>
+ &gpio 19 1>; // device reg=<1>
};
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0
+.. _imc:
+
+===================================
+IMC (In-Memory Collection Counters)
+===================================
+
+Anju T Sudhakar, 10 May 2019
+
+.. contents::
+ :depth: 3
+
+
+Basic overview
+==============
+
+IMC (In-Memory collection counters) is a hardware monitoring facility that
+collects large numbers of hardware performance events at Nest level (these are
+on-chip but off-core), Core level and Thread level.
+
+The Nest PMU counters are handled by a Nest IMC microcode which runs in the OCC
+(On-Chip Controller) complex. The microcode collects the counter data and moves
+the nest IMC counter data to memory.
+
+The Core and Thread IMC PMU counters are handled in the core. Core level PMU
+counters give us the IMC counters' data per core and thread level PMU counters
+give us the IMC counters' data per CPU thread.
+
+OPAL obtains the IMC PMU and supported events information from the IMC Catalog
+and passes on to the kernel via the device tree. The event's information
+contains:
+
+- Event name
+- Event Offset
+- Event description
+
+and possibly also:
+
+- Event scale
+- Event unit
+
+Some PMUs may have a common scale and unit values for all their supported
+events. For those cases, the scale and unit properties for those events must be
+inherited from the PMU.
+
+The event offset in the memory is where the counter data gets accumulated.
+
+IMC catalog is available at:
+ https://github.com/open-power/ima-catalog
+
+The kernel discovers the IMC counters information in the device tree at the
+`imc-counters` device node which has a compatible field
+`ibm,opal-in-memory-counters`. From the device tree, the kernel parses the PMUs
+and their event's information and register the PMU and its attributes in the
+kernel.
+
+IMC example usage
+=================
+
+.. code-block:: sh
+
+ # perf list
+ [...]
+ nest_mcs01/PM_MCS01_64B_RD_DISP_PORT01/ [Kernel PMU event]
+ nest_mcs01/PM_MCS01_64B_RD_DISP_PORT23/ [Kernel PMU event]
+ [...]
+ core_imc/CPM_0THRD_NON_IDLE_PCYC/ [Kernel PMU event]
+ core_imc/CPM_1THRD_NON_IDLE_INST/ [Kernel PMU event]
+ [...]
+ thread_imc/CPM_0THRD_NON_IDLE_PCYC/ [Kernel PMU event]
+ thread_imc/CPM_1THRD_NON_IDLE_INST/ [Kernel PMU event]
+
+To see per chip data for nest_mcs0/PM_MCS_DOWN_128B_DATA_XFER_MC0/:
+
+.. code-block:: sh
+
+ # ./perf stat -e "nest_mcs01/PM_MCS01_64B_WR_DISP_PORT01/" -a --per-socket
+
+To see non-idle instructions for core 0:
+
+.. code-block:: sh
+
+ # ./perf stat -e "core_imc/CPM_NON_IDLE_INST/" -C 0 -I 1000
+
+To see non-idle instructions for a "make":
+
+.. code-block:: sh
+
+ # ./perf stat -e "thread_imc/CPM_NON_IDLE_PCYC/" make
+
+
+IMC Trace-mode
+===============
+
+POWER9 supports two modes for IMC which are the Accumulation mode and Trace
+mode. In Accumulation mode, event counts are accumulated in system Memory.
+Hypervisor then reads the posted counts periodically or when requested. In IMC
+Trace mode, the 64 bit trace SCOM value is initialized with the event
+information. The CPMCxSEL and CPMC_LOAD in the trace SCOM, specifies the event
+to be monitored and the sampling duration. On each overflow in the CPMCxSEL,
+hardware snapshots the program counter along with event counts and writes into
+memory pointed by LDBAR.
+
+LDBAR is a 64 bit special purpose per thread register, it has bits to indicate
+whether hardware is configured for accumulation or trace mode.
+
+LDBAR Register Layout
+---------------------
+
+ +-------+----------------------+
+ | 0 | Enable/Disable |
+ +-------+----------------------+
+ | 1 | 0: Accumulation Mode |
+ | +----------------------+
+ | | 1: Trace Mode |
+ +-------+----------------------+
+ | 2:3 | Reserved |
+ +-------+----------------------+
+ | 4-6 | PB scope |
+ +-------+----------------------+
+ | 7 | Reserved |
+ +-------+----------------------+
+ | 8:50 | Counter Address |
+ +-------+----------------------+
+ | 51:63 | Reserved |
+ +-------+----------------------+
+
+TRACE_IMC_SCOM bit representation
+---------------------------------
+
+ +-------+------------+
+ | 0:1 | SAMPSEL |
+ +-------+------------+
+ | 2:33 | CPMC_LOAD |
+ +-------+------------+
+ | 34:40 | CPMC1SEL |
+ +-------+------------+
+ | 41:47 | CPMC2SEL |
+ +-------+------------+
+ | 48:50 | BUFFERSIZE |
+ +-------+------------+
+ | 51:63 | RESERVED |
+ +-------+------------+
+
+CPMC_LOAD contains the sampling duration. SAMPSEL and CPMCxSEL determines the
+event to count. BUFFERSIZE indicates the memory range. On each overflow,
+hardware snapshots the program counter along with event counts and updates the
+memory and reloads the CMPC_LOAD value for the next sampling duration. IMC
+hardware does not support exceptions, so it quietly wraps around if memory
+buffer reaches the end.
+
+*Currently the event monitored for trace-mode is fixed as cycle.*
+
+Trace IMC example usage
+=======================
+
+.. code-block:: sh
+
+ # perf list
+ [....]
+ trace_imc/trace_cycles/ [Kernel PMU event]
+
+To record an application/process with trace-imc event:
+
+.. code-block:: sh
+
+ # perf record -e trace_imc/trace_cycles/ yes > /dev/null
+ [ perf record: Woken up 1 times to write data ]
+ [ perf record: Captured and wrote 0.012 MB perf.data (21 samples) ]
+
+The `perf.data` generated, can be read using perf report.
+
+Benefits of using IMC trace-mode
+================================
+
+PMI (Performance Monitoring Interrupts) interrupt handling is avoided, since IMC
+trace mode snapshots the program counter and updates to the memory. And this
+also provide a way for the operating system to do instruction sampling in real
+time without PMI processing overhead.
+
+Performance data using `perf top` with and without trace-imc event.
+
+PMI interrupts count when `perf top` command is executed without trace-imc event.
+
+.. code-block:: sh
+
+ # grep PMI /proc/interrupts
+ PMI: 0 0 0 0 Performance monitoring interrupts
+ # ./perf top
+ ...
+ # grep PMI /proc/interrupts
+ PMI: 39735 8710 17338 17801 Performance monitoring interrupts
+ # ./perf top -e trace_imc/trace_cycles/
+ ...
+ # grep PMI /proc/interrupts
+ PMI: 39735 8710 17338 17801 Performance monitoring interrupts
+
+
+That is, the PMI interrupt counts do not increment when using the `trace_imc` event.
elfnote
firmware-assisted-dump
hvcs
+ imc
isa-versions
kaslr-booke32
mpc52xx
+ papr_hcalls
pci_iov_resource_on_powernv
pmu-ebb
ptrace
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Hypercall Op-codes (hcalls)
+===========================
+
+Overview
+=========
+
+Virtualization on 64-bit Power Book3S Platforms is based on the PAPR
+specification [1]_ which describes the run-time environment for a guest
+operating system and how it should interact with the hypervisor for
+privileged operations. Currently there are two PAPR compliant hypervisors:
+
+- **IBM PowerVM (PHYP)**: IBM's proprietary hypervisor that supports AIX,
+ IBM-i and Linux as supported guests (termed as Logical Partitions
+ or LPARS). It supports the full PAPR specification.
+
+- **Qemu/KVM**: Supports PPC64 linux guests running on a PPC64 linux host.
+ Though it only implements a subset of PAPR specification called LoPAPR [2]_.
+
+On PPC64 arch a guest kernel running on top of a PAPR hypervisor is called
+a *pSeries guest*. A pseries guest runs in a supervisor mode (HV=0) and must
+issue hypercalls to the hypervisor whenever it needs to perform an action
+that is hypervisor priviledged [3]_ or for other services managed by the
+hypervisor.
+
+Hence a Hypercall (hcall) is essentially a request by the pseries guest
+asking hypervisor to perform a privileged operation on behalf of the guest. The
+guest issues a with necessary input operands. The hypervisor after performing
+the privilege operation returns a status code and output operands back to the
+guest.
+
+HCALL ABI
+=========
+The ABI specification for a hcall between a pseries guest and PAPR hypervisor
+is covered in section 14.5.3 of ref [2]_. Switch to the Hypervisor context is
+done via the instruction **HVCS** that expects the Opcode for hcall is set in *r3*
+and any in-arguments for the hcall are provided in registers *r4-r12*. If values
+have to be passed through a memory buffer, the data stored in that buffer should be
+in Big-endian byte order.
+
+Once control is returns back to the guest after hypervisor has serviced the
+'HVCS' instruction the return value of the hcall is available in *r3* and any
+out values are returned in registers *r4-r12*. Again like in case of in-arguments,
+any out values stored in a memory buffer will be in Big-endian byte order.
+
+Powerpc arch code provides convenient wrappers named **plpar_hcall_xxx** defined
+in a arch specific header [4]_ to issue hcalls from the linux kernel
+running as pseries guest.
+
+Register Conventions
+====================
+
+Any hcall should follow same register convention as described in section 2.2.1.1
+of "64-Bit ELF V2 ABI Specification: Power Architecture"[5]_. Table below
+summarizes these conventions:
+
++----------+----------+-------------------------------------------+
+| Register |Volatile | Purpose |
+| Range |(Y/N) | |
++==========+==========+===========================================+
+| r0 | Y | Optional-usage |
++----------+----------+-------------------------------------------+
+| r1 | N | Stack Pointer |
++----------+----------+-------------------------------------------+
+| r2 | N | TOC |
++----------+----------+-------------------------------------------+
+| r3 | Y | hcall opcode/return value |
++----------+----------+-------------------------------------------+
+| r4-r10 | Y | in and out values |
++----------+----------+-------------------------------------------+
+| r11 | Y | Optional-usage/Environmental pointer |
++----------+----------+-------------------------------------------+
+| r12 | Y | Optional-usage/Function entry address at |
+| | | global entry point |
++----------+----------+-------------------------------------------+
+| r13 | N | Thread-Pointer |
++----------+----------+-------------------------------------------+
+| r14-r31 | N | Local Variables |
++----------+----------+-------------------------------------------+
+| LR | Y | Link Register |
++----------+----------+-------------------------------------------+
+| CTR | Y | Loop Counter |
++----------+----------+-------------------------------------------+
+| XER | Y | Fixed-point exception register. |
++----------+----------+-------------------------------------------+
+| CR0-1 | Y | Condition register fields. |
++----------+----------+-------------------------------------------+
+| CR2-4 | N | Condition register fields. |
++----------+----------+-------------------------------------------+
+| CR5-7 | Y | Condition register fields. |
++----------+----------+-------------------------------------------+
+| Others | N | |
++----------+----------+-------------------------------------------+
+
+DRC & DRC Indexes
+=================
+::
+
+ DR1 Guest
+ +--+ +------------+ +---------+
+ | | <----> | | | User |
+ +--+ DRC1 | | DRC | Space |
+ | PAPR | Index +---------+
+ DR2 | Hypervisor | | |
+ +--+ | | <-----> | Kernel |
+ | | <----> | | Hcall | |
+ +--+ DRC2 +------------+ +---------+
+
+PAPR hypervisor terms shared hardware resources like PCI devices, NVDIMMs etc
+available for use by LPARs as Dynamic Resource (DR). When a DR is allocated to
+an LPAR, PHYP creates a data-structure called Dynamic Resource Connector (DRC)
+to manage LPAR access. An LPAR refers to a DRC via an opaque 32-bit number
+called DRC-Index. The DRC-index value is provided to the LPAR via device-tree
+where its present as an attribute in the device tree node associated with the
+DR.
+
+HCALL Return-values
+===================
+
+After servicing the hcall, hypervisor sets the return-value in *r3* indicating
+success or failure of the hcall. In case of a failure an error code indicates
+the cause for error. These codes are defined and documented in arch specific
+header [4]_.
+
+In some cases a hcall can potentially take a long time and need to be issued
+multiple times in order to be completely serviced. These hcalls will usually
+accept an opaque value *continue-token* within there argument list and a
+return value of *H_CONTINUE* indicates that hypervisor hasn't still finished
+servicing the hcall yet.
+
+To make such hcalls the guest need to set *continue-token == 0* for the
+initial call and use the hypervisor returned value of *continue-token*
+for each subsequent hcall until hypervisor returns a non *H_CONTINUE*
+return value.
+
+HCALL Op-codes
+==============
+
+Below is a partial list of HCALLs that are supported by PHYP. For the
+corresponding opcode values please look into the arch specific header [4]_:
+
+**H_SCM_READ_METADATA**
+
+| Input: *drcIndex, offset, buffer-address, numBytesToRead*
+| Out: *numBytesRead*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_Hardware*
+
+Given a DRC Index of an NVDIMM, read N-bytes from the the metadata area
+associated with it, at a specified offset and copy it to provided buffer.
+The metadata area stores configuration information such as label information,
+bad-blocks etc. The metadata area is located out-of-band of NVDIMM storage
+area hence a separate access semantics is provided.
+
+**H_SCM_WRITE_METADATA**
+
+| Input: *drcIndex, offset, data, numBytesToWrite*
+| Out: *None*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P4, H_Hardware*
+
+Given a DRC Index of an NVDIMM, write N-bytes to the metadata area
+associated with it, at the specified offset and from the provided buffer.
+
+**H_SCM_BIND_MEM**
+
+| Input: *drcIndex, startingScmBlockIndex, numScmBlocksToBind,*
+| *targetLogicalMemoryAddress, continue-token*
+| Out: *continue-token, targetLogicalMemoryAddress, numScmBlocksToBound*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_P4, H_Overlap,*
+| *H_Too_Big, H_P5, H_Busy*
+
+Given a DRC-Index of an NVDIMM, map a continuous SCM blocks range
+*(startingScmBlockIndex, startingScmBlockIndex+numScmBlocksToBind)* to the guest
+at *targetLogicalMemoryAddress* within guest physical address space. In
+case *targetLogicalMemoryAddress == 0xFFFFFFFF_FFFFFFFF* then hypervisor
+assigns a target address to the guest. The HCALL can fail if the Guest has
+an active PTE entry to the SCM block being bound.
+
+**H_SCM_UNBIND_MEM**
+| Input: drcIndex, startingScmLogicalMemoryAddress, numScmBlocksToUnbind
+| Out: numScmBlocksUnbound
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_In_Use, H_Overlap,*
+| *H_Busy, H_LongBusyOrder1mSec, H_LongBusyOrder10mSec*
+
+Given a DRC-Index of an NVDimm, unmap *numScmBlocksToUnbind* SCM blocks starting
+at *startingScmLogicalMemoryAddress* from guest physical address space. The
+HCALL can fail if the Guest has an active PTE entry to the SCM block being
+unbound.
+
+**H_SCM_QUERY_BLOCK_MEM_BINDING**
+
+| Input: *drcIndex, scmBlockIndex*
+| Out: *Guest-Physical-Address*
+| Return Value: *H_Success, H_Parameter, H_P2, H_NotFound*
+
+Given a DRC-Index and an SCM Block index return the guest physical address to
+which the SCM block is mapped to.
+
+**H_SCM_QUERY_LOGICAL_MEM_BINDING**
+
+| Input: *Guest-Physical-Address*
+| Out: *drcIndex, scmBlockIndex*
+| Return Value: *H_Success, H_Parameter, H_P2, H_NotFound*
+
+Given a guest physical address return which DRC Index and SCM block is mapped
+to that address.
+
+**H_SCM_UNBIND_ALL**
+
+| Input: *scmTargetScope, drcIndex*
+| Out: *None*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_In_Use, H_Busy,*
+| *H_LongBusyOrder1mSec, H_LongBusyOrder10mSec*
+
+Depending on the Target scope unmap all SCM blocks belonging to all NVDIMMs
+or all SCM blocks belonging to a single NVDIMM identified by its drcIndex
+from the LPAR memory.
+
+**H_SCM_HEALTH**
+
+| Input: drcIndex
+| Out: *health-bitmap, health-bit-valid-bitmap*
+| Return Value: *H_Success, H_Parameter, H_Hardware*
+
+Given a DRC Index return the info on predictive failure and overall health of
+the NVDIMM. The asserted bits in the health-bitmap indicate a single predictive
+failure and health-bit-valid-bitmap indicate which bits in health-bitmap are
+valid.
+
+**H_SCM_PERFORMANCE_STATS**
+
+| Input: drcIndex, resultBuffer Addr
+| Out: None
+| Return Value: *H_Success, H_Parameter, H_Unsupported, H_Hardware, H_Authority, H_Privilege*
+
+Given a DRC Index collect the performance statistics for NVDIMM and copy them
+to the resultBuffer.
+
+References
+==========
+.. [1] "Power Architecture Platform Reference"
+ https://en.wikipedia.org/wiki/Power_Architecture_Platform_Reference
+.. [2] "Linux on Power Architecture Platform Reference"
+ https://members.openpowerfoundation.org/document/dl/469
+.. [3] "Definitions and Notation" Book III-Section 14.5.3
+ https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0
+.. [4] arch/powerpc/include/asm/hvcall.h
+.. [5] "64-Bit ELF V2 ABI Specification: Power Architecture"
+ https://openpowerfoundation.org/?resource_lib=64-bit-elf-v2-abi-specification-power-architecture
S: Maintained
F: drivers/media/rc/ene_ir.*
+EPAPR HYPERVISOR BYTE CHANNEL DEVICE DRIVER
+M: Laurentiu Tudor <laurentiu.tudor@nxp.com>
+L: linuxppc-dev@lists.ozlabs.org
+S: Maintained
+F: drivers/tty/ehv_bytechan.c
+
EPSON S1D13XXX FRAMEBUFFER DRIVER
M: Kristoffer Ericson <kristoffer.ericson@gmail.com>
S: Maintained
# SPDX-License-Identifier: GPL-2.0
source "arch/powerpc/platforms/Kconfig.cputype"
-config PPC32
- bool
- default y if !PPC64
-
config 32BIT
bool
default y if PPC32
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_MEMBARRIER_CALLBACKS
select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64
- select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !RELOCATABLE && !HIBERNATION)
+ select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !HIBERNATION)
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAS_UACCESS_FLUSHCACHE
select ARCH_HAS_UACCESS_MCSAFE if PPC64
select HAVE_ARCH_HUGE_VMAP if PPC_BOOK3S_64 && PPC_RADIX_MMU
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KASAN if PPC32
+ select HAVE_ARCH_KASAN_VMALLOC if PPC32
select HAVE_ARCH_KGDB
select HAVE_ARCH_MMAP_RND_BITS
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
depends on SMP && (PPC_PSERIES || \
- PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
+ PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
help
Say Y here to be able to disable and re-enable individual
CPUs at runtime on SMP machines.
config PPC_DEBUG_WX
bool "Warn on W+X mappings at boot"
- depends on PPC_PTDUMP
+ depends on PPC_PTDUMP && STRICT_KERNEL_RWX
help
Generate a warning if any W+X mappings are found at boot.
quiet_cmd_relocs_check = CHKREL $@
ifdef CONFIG_PPC_BOOK3S_64
cmd_relocs_check = \
- $(CONFIG_SHELL) $(srctree)/arch/powerpc/tools/relocs_check.sh "$(OBJDUMP)" "$@" ; \
+ $(CONFIG_SHELL) $(srctree)/arch/powerpc/tools/relocs_check.sh "$(OBJDUMP)" "$(NM)" "$@" ; \
$(BASH) $(srctree)/arch/powerpc/tools/unrel_branch_check.sh "$(OBJDUMP)" "$@"
else
cmd_relocs_check = \
- $(CONFIG_SHELL) $(srctree)/arch/powerpc/tools/relocs_check.sh "$(OBJDUMP)" "$@"
+ $(CONFIG_SHELL) $(srctree)/arch/powerpc/tools/relocs_check.sh "$(OBJDUMP)" "$(NM)" "$@"
endif
# `@true` prevents complaint when there is nothing to be done
dpath = 8; /* 64 bits */
/* get address pins (rows) */
- val = SDRAM0_READ(DDR0_42);
+ val = SDRAM0_READ(DDR0_42);
row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
if (row > max_row)
reg = <0x11a80 0x40 0x89fc 0x2>;
interrupts = <2 8>;
interrupt-parent = <&PIC>;
- gpios = < &cpm2_pio_d 19 0>;
+ cs-gpios = < &cpm2_pio_d 19 0>;
#address-cells = <1>;
#size-cells = <0>;
ds3106@1 {
reg = <0x4c0 0x40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
- gpios = <&qe_pio_d 13 0>;
+ cs-gpios = <&qe_pio_d 13 0>;
mode = "cpu-qe";
mmc-slot@0 {
interrupts = <59 2>;
interrupt-parent = <&mpic>;
mode = "cpu";
- gpios = <&sdcsr_pio 7 0>;
+ cs-gpios = <&sdcsr_pio 7 0>;
sleep = <&pmc 0x00000800 0>;
mmc-slot@0 {
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_HP is not set
CONFIG_IBM_EMAC=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_AMIGA_PARTITION=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
# CONFIG_EBONY is not set
CONFIG_SAM440EP=y
CONFIG_CMDLINE_BOOL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_CHRP is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_PPC_ADDER875=y
CONFIG_8xx_COPYBACK=y
CONFIG_GEN_RTC=y
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_82xx=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_PPC_EP88XC=y
CONFIG_8xx_COPYBACK=y
CONFIG_GEN_RTC=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_82xx=y
CONFIG_MGCOGE=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_CHRP is not set
CONFIG_PPC_MPC512x=y
CONFIG_MPC512x_LPBFIFO=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_8xx_COPYBACK=y
CONFIG_GEN_RTC=y
CONFIG_HZ_100=y
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_CORE_IPOIB=y
CONFIG_MYRI10GE=m
-CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_USB_NET_DRIVERS=m
# CONFIG_WLAN is not set
CONFIG_MYRI10GE=m
CONFIG_S2IO=m
CONFIG_PASEMI_MAC=y
-CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_SUNGEM=y
CONFIG_GELIC_NET=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_QLA3XXX=m
-CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_I40E=m
CONFIG_MLX4_EN=m
CONFIG_MYRI10GE=m
-CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
-CONFIG_PPC64=y
-CONFIG_ALTIVEC=y
-CONFIG_VSX=y
-CONFIG_NR_CPUS=2048
-CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_KERNEL_XZ=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_AIO is not set
CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB_MERGE_DEFAULT is not set
+CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
-CONFIG_JUMP_LABEL=y
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_SIG=y
-CONFIG_MODULE_SIG_FORCE=y
-CONFIG_MODULE_SIG_SHA512=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MQ_IOSCHED_DEADLINE is not set
-# CONFIG_MQ_IOSCHED_KYBER is not set
+CONFIG_PPC64=y
+CONFIG_ALTIVEC=y
+CONFIG_VSX=y
+CONFIG_NR_CPUS=2048
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_PANIC_TIMEOUT=30
# CONFIG_PPC_VAS is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
CONFIG_CPU_IDLE=y
CONFIG_HZ_100=y
CONFIG_KEXEC=y
+CONFIG_KEXEC_FILE=y
CONFIG_PRESERVE_FA_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
-# CONFIG_COMPACTION is not set
-# CONFIG_MIGRATION is not set
CONFIG_PPC_64K_PAGES=y
CONFIG_SCHED_SMT=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=tty0 console=hvc0 ipr.fast_reboot=1 quiet"
# CONFIG_SECCOMP is not set
# CONFIG_PPC_MEM_KEYS is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_SIG_FORCE=y
+CONFIG_MODULE_SIG_SHA512=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_MQ_IOSCHED_DEADLINE is not set
+# CONFIG_MQ_IOSCHED_KYBER is not set
+# CONFIG_COMPACTION is not set
+# CONFIG_MIGRATION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_BNX2X=m
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CADENCE is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
CONFIG_CHELSIO_T1=m
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_BE2NET=m
# CONFIG_NET_VENDOR_EZCHIP is not set
-# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_I40E=m
-CONFIG_S2IO=m
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_MLX4_EN=m
# CONFIG_MLX4_CORE_GEN2 is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
CONFIG_MYRI10GE=m
# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_S2IO=m
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
-CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QEDE=m
CONFIG_HID_EZKEY=y
CONFIG_HID_ITE=y
CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_USB_HIDDEV=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
+CONFIG_ENCRYPTED_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_HARDENED_USERCOPY=y
+# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
+CONFIG_HARDENED_USERCOPY_PAGESPAN=y
+CONFIG_FORTIFY_SOURCE=y
+CONFIG_SECURITY_LOCKDOWN_LSM=y
+CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
+CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY=y
+# CONFIG_INTEGRITY is not set
+CONFIG_LSM="yama,loadpin,safesetid,integrity"
+# CONFIG_CRYPTO_HW is not set
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=y
CONFIG_LIBCRC32C=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_SLUB_DEBUG_ON=y
+CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_PANIC_ON_OOPS=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_WQ_WATCHDOG=y
# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_SG=y
+CONFIG_DEBUG_NOTIFIERS=y
+CONFIG_BUG_ON_DATA_CORRUPTION=y
+CONFIG_DEBUG_CREDENTIALS=y
# CONFIG_FTRACE is not set
-# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-CONFIG_ENCRYPTED_KEYS=y
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_HW is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_CRC_T10DIF=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_TQM8XX=y
CONFIG_8xx_COPYBACK=y
# CONFIG_8xx_CPU15 is not set
#else
#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
#endif
+
+#ifdef CONFIG_KASAN_VMALLOC
+#define VMALLOC_END _ALIGN_DOWN(ioremap_bot, PAGE_SIZE << KASAN_SHADOW_SCALE_SHIFT)
+#else
#define VMALLOC_END ioremap_bot
+#endif
#ifndef __ASSEMBLY__
#include <linux/sched.h>
#define CPU_FTR_P9_TLBIE_STQ_BUG LONG_ASM_CONST(0x0000400000000000)
#define CPU_FTR_P9_TIDR LONG_ASM_CONST(0x0000800000000000)
#define CPU_FTR_P9_TLBIE_ERAT_BUG LONG_ASM_CONST(0x0001000000000000)
+#define CPU_FTR_P9_RADIX_PREFETCH_BUG LONG_ASM_CONST(0x0002000000000000)
#ifndef __ASSEMBLY__
CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
CPU_FTR_P9_TLBIE_STQ_BUG | CPU_FTR_P9_TLBIE_ERAT_BUG | CPU_FTR_P9_TIDR)
-#define CPU_FTRS_POWER9_DD2_0 CPU_FTRS_POWER9
-#define CPU_FTRS_POWER9_DD2_1 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1)
+#define CPU_FTRS_POWER9_DD2_0 (CPU_FTRS_POWER9 | CPU_FTR_P9_RADIX_PREFETCH_BUG)
+#define CPU_FTRS_POWER9_DD2_1 (CPU_FTRS_POWER9 | \
+ CPU_FTR_P9_RADIX_PREFETCH_BUG | \
+ CPU_FTR_POWER9_DD2_1)
#define CPU_FTRS_POWER9_DD2_2 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1 | \
CPU_FTR_P9_TM_HV_ASSIST | \
CPU_FTR_P9_TM_XER_SO_BUG)
#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000)
#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000000020000)
#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000)
-#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000)
+#define FW_FEATURE_PUT_TCE_IND ASM_CONST(0x0000000000080000)
#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000)
#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000)
#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000)
#define FW_FEATURE_BLOCK_REMOVE ASM_CONST(0x0000001000000000)
#define FW_FEATURE_PAPR_SCM ASM_CONST(0x0000002000000000)
#define FW_FEATURE_ULTRAVISOR ASM_CONST(0x0000004000000000)
+#define FW_FEATURE_STUFF_TCE ASM_CONST(0x0000008000000000)
#ifndef __ASSEMBLY__
FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
- FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
+ FW_FEATURE_PUT_TCE_IND | FW_FEATURE_STUFF_TCE |
+ FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO |
FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY |
FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN |
#define HW_BRK_TYPE_PRIV_ALL (HW_BRK_TYPE_USER | HW_BRK_TYPE_KERNEL | \
HW_BRK_TYPE_HYP)
+#ifdef CONFIG_PPC_8xx
+#define HW_BREAKPOINT_ALIGN 0x3
+#else
#define HW_BREAKPOINT_ALIGN 0x7
+#endif
#define DABR_MAX_LEN 8
#define DAWR_MAX_LEN 512
void kasan_early_init(void);
void kasan_mmu_init(void);
void kasan_init(void);
+void kasan_late_init(void);
#else
static inline void kasan_init(void) { }
static inline void kasan_mmu_init(void) { }
+static inline void kasan_late_init(void) { }
#endif
#endif /* __ASSEMBLY */
#else
#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
#endif
+
+#ifdef CONFIG_KASAN_VMALLOC
+#define VMALLOC_END _ALIGN_DOWN(ioremap_bot, PAGE_SIZE << KASAN_SHADOW_SCALE_SHIFT)
+#else
#define VMALLOC_END ioremap_bot
+#endif
/*
* Bits in a linux-style PTE. These match the bits in the
*/
#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET))
-#define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
+#define __pa(x) ((phys_addr_t)(unsigned long)(x) - VIRT_PHYS_OFFSET)
#else
#ifdef CONFIG_PPC64
/*
extern struct pci_dn *pci_get_pdn_by_devfn(struct pci_bus *bus,
int devfn);
extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev);
-extern struct pci_dn *add_dev_pci_data(struct pci_dev *pdev);
-extern void remove_dev_pci_data(struct pci_dev *pdev);
extern struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
struct device_node *dn);
extern void pci_remove_device_node_info(struct device_node *dn);
+#ifdef CONFIG_PCI_IOV
+struct pci_dn *add_sriov_vf_pdns(struct pci_dev *pdev);
+void remove_sriov_vf_pdns(struct pci_dev *pdev);
+#endif
+
static inline int pci_device_from_OF_node(struct device_node *np,
u8 *bus, u8 *devfn)
{
pgprot_t prot);
extern resource_size_t pcibios_io_space_offset(struct pci_controller *hose);
-extern void pcibios_setup_bus_devices(struct pci_bus *bus);
extern void pcibios_setup_bus_self(struct pci_bus *bus);
extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
extern void pcibios_scan_phb(struct pci_controller *hose);
static inline void mark_initmem_nx(void) { }
#endif
-#ifdef CONFIG_PPC_DEBUG_WX
-void ptdump_check_wx(void);
-#else
-static inline void ptdump_check_wx(void) { }
-#endif
-
/*
* When used, PTE_FRAG_NR is defined in subarch pgtable.h
* so we are sure it is included when arriving here.
#define PCI_SLOT_ID_PREFIX (1UL << 63)
#define PCI_SLOT_ID(phb_id, bdfn) \
(PCI_SLOT_ID_PREFIX | ((uint64_t)(bdfn) << 16) | (phb_id))
+#define PCI_PHB_SLOT_ID(phb_id) (phb_id)
extern int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id);
extern int pnv_pci_get_device_tree(uint32_t phandle, void *buf, uint64_t len);
#endif
#if defined(CONFIG_PPC_BOOK3S_32) && defined(CONFIG_PPC_KUAP)
unsigned long kuap; /* opened segments for user access */
+#endif
+#ifdef CONFIG_VMAP_STACK
+ unsigned long srr0;
+ unsigned long srr1;
+ unsigned long dar;
+ unsigned long dsisr;
#endif
/* Debug Registers */
struct debug_reg debug;
extern unsigned long isa300_idle_stop_noloss(unsigned long psscr_val);
extern unsigned long isa300_idle_stop_mayloss(unsigned long psscr_val);
extern unsigned long isa206_idle_insn_mayloss(unsigned long type);
+#ifdef CONFIG_PPC_970_NAP
+extern void power4_idle_nap(void);
+#endif
extern unsigned long cpuidle_disable;
enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
#define SPRN_CMPE 152
#define SPRN_CMPF 153
#define SPRN_LCTRL1 156
+#define LCTRL1_CTE_GT 0xc0000000
+#define LCTRL1_CTF_LT 0x14000000
+#define LCTRL1_CRWE_RW 0x00000000
+#define LCTRL1_CRWE_RO 0x00040000
+#define LCTRL1_CRWE_WO 0x000c0000
+#define LCTRL1_CRWF_RW 0x00000000
+#define LCTRL1_CRWF_RO 0x00010000
+#define LCTRL1_CRWF_WO 0x00030000
#define SPRN_LCTRL2 157
+#define LCTRL2_LW0EN 0x80000000
+#define LCTRL2_LW0LA_E 0x00000000
+#define LCTRL2_LW0LA_F 0x04000000
+#define LCTRL2_LW0LA_EandF 0x08000000
+#define LCTRL2_LW0LADC 0x02000000
+#define LCTRL2_SLW0EN 0x00000002
#ifdef CONFIG_PPC_8xx
#define SPRN_ICTRL 158
#endif
#define _ASM_POWERPC_THREAD_INFO_H
#include <asm/asm-const.h>
+#include <asm/page.h>
#ifdef __KERNEL__
+#if defined(CONFIG_VMAP_STACK) && CONFIG_THREAD_SHIFT < PAGE_SHIFT
+#define THREAD_SHIFT PAGE_SHIFT
+#else
#define THREAD_SHIFT CONFIG_THREAD_SHIFT
+#endif
#define THREAD_SIZE (1 << THREAD_SHIFT)
+/*
+ * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by
+ * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry
+ * assembly.
+ */
+#ifdef CONFIG_VMAP_STACK
+#define THREAD_ALIGN_SHIFT (THREAD_SHIFT + 1)
+#else
+#define THREAD_ALIGN_SHIFT THREAD_SHIFT
+#endif
+
+#define THREAD_ALIGN (1 << THREAD_ALIGN_SHIFT)
+
#ifndef __ASSEMBLY__
#include <linux/cache.h>
#include <asm/processor.h>
__u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */
__u32 hrtimer_res; /* hrtimer resolution */
__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
- __u32 dcache_block_size; /* L1 d-cache block size */
- __u32 icache_block_size; /* L1 i-cache block size */
- __u32 dcache_log_block_size; /* L1 d-cache log block size */
- __u32 icache_log_block_size; /* L1 i-cache log block size */
};
#endif /* CONFIG_PPC64 */
extern struct vdso_data *vdso_data;
+#else /* __ASSEMBLY__ */
+
+.macro get_datapage ptr, tmp
+ bcl 20, 31, .+4
+ mflr \ptr
+ addi \ptr, \ptr, (__kernel_datapage_offset - (.-4))@l
+ lwz \tmp, 0(\ptr)
+ add \ptr, \tmp, \ptr
+.endm
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
static inline bool xive_enabled(void) { return __xive_enabled; }
-extern bool xive_spapr_init(void);
-extern bool xive_native_init(void);
-extern void xive_smp_probe(void);
-extern int xive_smp_prepare_cpu(unsigned int cpu);
-extern void xive_smp_setup_cpu(void);
-extern void xive_smp_disable_cpu(void);
-extern void xive_teardown_cpu(void);
-extern void xive_shutdown(void);
-extern void xive_flush_interrupt(void);
+bool xive_spapr_init(void);
+bool xive_native_init(void);
+void xive_smp_probe(void);
+int xive_smp_prepare_cpu(unsigned int cpu);
+void xive_smp_setup_cpu(void);
+void xive_smp_disable_cpu(void);
+void xive_teardown_cpu(void);
+void xive_shutdown(void);
+void xive_flush_interrupt(void);
/* xmon hook */
-extern void xmon_xive_do_dump(int cpu);
-extern int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d);
+void xmon_xive_do_dump(int cpu);
+int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d);
/* APIs used by KVM */
-extern u32 xive_native_default_eq_shift(void);
-extern u32 xive_native_alloc_vp_block(u32 max_vcpus);
-extern void xive_native_free_vp_block(u32 vp_base);
-extern int xive_native_populate_irq_data(u32 hw_irq,
- struct xive_irq_data *data);
-extern void xive_cleanup_irq_data(struct xive_irq_data *xd);
-extern u32 xive_native_alloc_irq(void);
-extern void xive_native_free_irq(u32 irq);
-extern int xive_native_configure_irq(u32 hw_irq, u32 target, u8 prio, u32 sw_irq);
-
-extern int xive_native_configure_queue(u32 vp_id, struct xive_q *q, u8 prio,
- __be32 *qpage, u32 order, bool can_escalate);
-extern void xive_native_disable_queue(u32 vp_id, struct xive_q *q, u8 prio);
-
-extern void xive_native_sync_source(u32 hw_irq);
-extern void xive_native_sync_queue(u32 hw_irq);
-extern bool is_xive_irq(struct irq_chip *chip);
-extern int xive_native_enable_vp(u32 vp_id, bool single_escalation);
-extern int xive_native_disable_vp(u32 vp_id);
-extern int xive_native_get_vp_info(u32 vp_id, u32 *out_cam_id, u32 *out_chip_id);
-extern bool xive_native_has_single_escalation(void);
-
-extern int xive_native_get_queue_info(u32 vp_id, uint32_t prio,
- u64 *out_qpage,
- u64 *out_qsize,
- u64 *out_qeoi_page,
- u32 *out_escalate_irq,
- u64 *out_qflags);
-
-extern int xive_native_get_queue_state(u32 vp_id, uint32_t prio, u32 *qtoggle,
- u32 *qindex);
-extern int xive_native_set_queue_state(u32 vp_id, uint32_t prio, u32 qtoggle,
- u32 qindex);
-extern int xive_native_get_vp_state(u32 vp_id, u64 *out_state);
-extern bool xive_native_has_queue_state_support(void);
+u32 xive_native_default_eq_shift(void);
+u32 xive_native_alloc_vp_block(u32 max_vcpus);
+void xive_native_free_vp_block(u32 vp_base);
+int xive_native_populate_irq_data(u32 hw_irq,
+ struct xive_irq_data *data);
+void xive_cleanup_irq_data(struct xive_irq_data *xd);
+u32 xive_native_alloc_irq(void);
+void xive_native_free_irq(u32 irq);
+int xive_native_configure_irq(u32 hw_irq, u32 target, u8 prio, u32 sw_irq);
+
+int xive_native_configure_queue(u32 vp_id, struct xive_q *q, u8 prio,
+ __be32 *qpage, u32 order, bool can_escalate);
+void xive_native_disable_queue(u32 vp_id, struct xive_q *q, u8 prio);
+
+void xive_native_sync_source(u32 hw_irq);
+void xive_native_sync_queue(u32 hw_irq);
+bool is_xive_irq(struct irq_chip *chip);
+int xive_native_enable_vp(u32 vp_id, bool single_escalation);
+int xive_native_disable_vp(u32 vp_id);
+int xive_native_get_vp_info(u32 vp_id, u32 *out_cam_id, u32 *out_chip_id);
+bool xive_native_has_single_escalation(void);
+
+int xive_native_get_queue_info(u32 vp_id, uint32_t prio,
+ u64 *out_qpage,
+ u64 *out_qsize,
+ u64 *out_qeoi_page,
+ u32 *out_escalate_irq,
+ u64 *out_qflags);
+
+int xive_native_get_queue_state(u32 vp_id, uint32_t prio, u32 *qtoggle,
+ u32 *qindex);
+int xive_native_set_queue_state(u32 vp_id, uint32_t prio, u32 qtoggle,
+ u32 qindex);
+int xive_native_get_vp_state(u32 vp_id, u64 *out_state);
+bool xive_native_has_queue_state_support(void);
#else
obj-$(CONFIG_PPC_BARRIER_NOSPEC) += security.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
-obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
-obj-$(CONFIG_PPC_P7_NAP) += idle_book3s.o
+obj-$(CONFIG_PPC_BOOK3S_IDLE) += idle_book3s.o
procfs-y := proc_powerpc.o
obj-$(CONFIG_PROC_FS) += $(procfs-y)
rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o
OFFSET(KSP_VSID, thread_struct, ksp_vsid);
#else /* CONFIG_PPC64 */
OFFSET(PGDIR, thread_struct, pgdir);
+#ifdef CONFIG_VMAP_STACK
+ OFFSET(SRR0, thread_struct, srr0);
+ OFFSET(SRR1, thread_struct, srr1);
+ OFFSET(DAR, thread_struct, dar);
+ OFFSET(DSISR, thread_struct, dsisr);
+#endif
#ifdef CONFIG_SPE
OFFSET(THREAD_EVR0, thread_struct, evr[0]);
OFFSET(THREAD_ACC, thread_struct, acc);
OFFSET(STAMP_XTIME_NSEC, vdso_data, stamp_xtime_nsec);
OFFSET(STAMP_SEC_FRAC, vdso_data, stamp_sec_fraction);
OFFSET(CLOCK_HRTIMER_RES, vdso_data, hrtimer_res);
+#ifdef CONFIG_PPC64
OFFSET(CFG_ICACHE_BLOCKSZ, vdso_data, icache_block_size);
OFFSET(CFG_DCACHE_BLOCKSZ, vdso_data, dcache_block_size);
OFFSET(CFG_ICACHE_LOGBLOCKSZ, vdso_data, icache_log_block_size);
OFFSET(CFG_DCACHE_LOGBLOCKSZ, vdso_data, dcache_log_block_size);
-#ifdef CONFIG_PPC64
OFFSET(CFG_SYSCALL_MAP64, vdso_data, syscall_map_64);
OFFSET(TVAL64_TV_SEC, __kernel_old_timeval, tv_sec);
OFFSET(TVAL64_TV_USEC, __kernel_old_timeval, tv_usec);
DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
DEFINE(CLOCK_REALTIME_COARSE, CLOCK_REALTIME_COARSE);
DEFINE(CLOCK_MONOTONIC_COARSE, CLOCK_MONOTONIC_COARSE);
+ DEFINE(CLOCK_MAX, CLOCK_TAI);
DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
+ DEFINE(EINVAL, EINVAL);
+ DEFINE(KTIME_LOW_RES, KTIME_LOW_RES);
#ifdef CONFIG_BUG
DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry));
/*
* Not all quirks can be derived from the cpufeatures device tree.
*/
- if ((version & 0xffffefff) == 0x004e0200)
- ; /* DD2.0 has no feature flag */
- else if ((version & 0xffffefff) == 0x004e0201)
+ if ((version & 0xffffefff) == 0x004e0200) {
+ /* DD2.0 has no feature flag */
+ cur_cpu_spec->cpu_features |= CPU_FTR_P9_RADIX_PREFETCH_BUG;
+ } else if ((version & 0xffffefff) == 0x004e0201) {
cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD2_1;
- else if ((version & 0xffffefff) == 0x004e0202) {
+ cur_cpu_spec->cpu_features |= CPU_FTR_P9_RADIX_PREFETCH_BUG;
+ } else if ((version & 0xffffefff) == 0x004e0202) {
cur_cpu_spec->cpu_features |= CPU_FTR_P9_TM_HV_ASSIST;
cur_cpu_spec->cpu_features |= CPU_FTR_P9_TM_XER_SO_BUG;
cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD2_1;
- } else if ((version & 0xffff0000) == 0x004e0000)
+ } else if ((version & 0xffff0000) == 0x004e0000) {
/* DD2.1 and up have DD2_1 */
cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD2_1;
+ }
if ((version & 0xffff0000) == 0x004e0000) {
cur_cpu_spec->cpu_features &= ~(CPU_FTR_DAWR);
rc = 1;
if (pe->state & EEH_PE_ISOLATED) {
pe->check_count++;
- if (pe->check_count % EEH_MAX_FAILS == 0) {
+ if (pe->check_count == EEH_MAX_FAILS) {
dn = pci_device_to_OF_node(dev);
if (dn)
location = of_get_property(dn, "ibm,loc-code",
eeh_rmv_from_parent_pe(edev);
eeh_addr_cache_rmv_dev(edev->pdev);
eeh_sysfs_remove_device(edev->pdev);
- edev->mode &= ~EEH_DEV_SYSFS;
/*
* We definitely should have the PCI device removed
edev->pdev = NULL;
/*
- * The flag "in_error" is used to trace EEH devices for VFs
- * in error state or not. It's set in eeh_report_error(). If
- * it's not set, eeh_report_{reset,resume}() won't be called
- * for the VF EEH device.
+ * eeh_sysfs_remove_device() uses pci_dev_to_eeh_dev() so we need to
+ * remove the sysfs files before clearing dev.archdata.edev
*/
- edev->in_error = false;
- dev->dev.archdata.edev = NULL;
- if (!(edev->pe->state & EEH_PE_KEEP))
- eeh_rmv_from_parent_pe(edev);
- else
- edev->mode |= EEH_DEV_DISCONNECTED;
+ if (edev->mode & EEH_DEV_SYSFS)
+ eeh_sysfs_remove_device(dev);
/*
* We're removing from the PCI subsystem, that means
edev->mode |= EEH_DEV_NO_HANDLER;
eeh_addr_cache_rmv_dev(dev);
- eeh_sysfs_remove_device(dev);
- edev->mode &= ~EEH_DEV_SYSFS;
+
+ /*
+ * The flag "in_error" is used to trace EEH devices for VFs
+ * in error state or not. It's set in eeh_report_error(). If
+ * it's not set, eeh_report_{reset,resume}() won't be called
+ * for the VF EEH device.
+ */
+ edev->in_error = false;
+ dev->dev.archdata.edev = NULL;
+ if (!(edev->pe->state & EEH_PE_KEEP))
+ eeh_rmv_from_parent_pe(edev);
+ else
+ edev->mode |= EEH_DEV_DISCONNECTED;
}
int eeh_unfreeze_pe(struct eeh_pe *pe)
static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
{
- struct pci_dn *pdn;
struct eeh_dev *edev;
int i;
- pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
- if (!pdn) {
- pr_warn("PCI: no pci dn found for dev=%s\n",
- pci_name(dev));
- return;
- }
-
- edev = pdn_to_eeh_dev(pdn);
+ edev = pci_dev_to_eeh_dev(dev);
if (!edev) {
pr_warn("PCI: no EEH dev found for %s\n",
pci_name(dev));
pci_iov_remove_virtfn(edev->physfn, pdn->vf_index);
edev->pdev = NULL;
-
- /*
- * We have to set the VF PE number to invalid one, which is
- * required to plug the VF successfully.
- */
- pdn->pe_number = IODA_INVALID_PE;
#endif
if (rmv_data)
list_add(&edev->rmv_entry, &rmv_data->removed_vf_list);
/**
* EEH_SHOW_ATTR -- Create sysfs entry for eeh statistic
* @_name: name of file in sysfs directory
- * @_memb: name of member in struct pci_dn to access
+ * @_memb: name of member in struct eeh_dev to access
* @_format: printf format for display
*
* All of the attributes look very similar, so just
static DEVICE_ATTR_RW(eeh_pe_state);
-#ifdef CONFIG_PCI_IOV
+#if defined(CONFIG_PCI_IOV) && defined(CONFIG_PPC_PSERIES)
static ssize_t eeh_notify_resume_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
if (!edev || !edev->pe)
return -ENODEV;
- pdn = pci_get_pdn(pdev);
return sprintf(buf, "%d\n", pdn->last_allow_rc);
}
#else
static inline int eeh_notify_resume_add(struct pci_dev *pdev) { return 0; }
static inline void eeh_notify_resume_remove(struct pci_dev *pdev) { }
-#endif /* CONFIG_PCI_IOV */
+#endif /* CONFIG_PCI_IOV && CONFIG PPC_PSERIES*/
void eeh_sysfs_add_device(struct pci_dev *pdev)
{
{
struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
+ if (!edev) {
+ WARN_ON(eeh_enabled());
+ return;
+ }
+
+ edev->mode &= ~EEH_DEV_SYSFS;
+
/*
* The parent directory might have been removed. We needn't
* continue for that case.
*/
- if (!pdev->dev.kobj.sd) {
- if (edev)
- edev->mode &= ~EEH_DEV_SYSFS;
+ if (!pdev->dev.kobj.sd)
return;
- }
device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
device_remove_file(&pdev->dev, &dev_attr_eeh_pe_state);
eeh_notify_resume_remove(pdev);
-
- if (edev)
- edev->mode &= ~EEH_DEV_SYSFS;
}
stw r12,_CTR(r11)
stw r2,_XER(r11)
mfspr r12,SPRN_SPRG_THREAD
+ tovirt_vmstack r12, r12
beq 2f /* if from user, fix up THREAD.regs */
addi r2, r12, -THREAD
addi r11,r1,STACK_FRAME_OVERHEAD
2: /* if from kernel, check interrupted DOZE/NAP mode and
* check for stack overflow
*/
- kuap_save_and_lock r11, r12, r9, r2, r0
+ kuap_save_and_lock r11, r12, r9, r2, r6
addi r2, r12, -THREAD
+#ifndef CONFIG_VMAP_STACK
lwz r9,KSP_LIMIT(r12)
cmplw r1,r9 /* if r1 <= ksp_limit */
ble- stack_ovf /* then the kernel stack overflowed */
+#endif
5:
#if defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_E500)
lwz r12,TI_LOCAL_FLAGS(r2)
transfer_to_handler_cont:
3:
mflr r9
- tovirt(r2, r2) /* set r2 to current */
+ tovirt_novmstack r2, r2 /* set r2 to current */
+ tovirt_vmstack r9, r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PERF_EVENTS)
rlwinm r9,r9,0,~MSR_EE
lwz r12,_LINK(r11) /* and return to address in LR */
kuap_restore r11, r2, r3, r4, r5
+ lwz r2, GPR2(r11)
b fast_exception_return
#endif
+#ifndef CONFIG_VMAP_STACK
/*
* On kernel stack overflow, load up an initial stack pointer
* and call StackOverflow(regs), which should not return.
mtspr SPRN_SRR1,r10
SYNC
RFI
+#endif
#ifdef CONFIG_TRACE_IRQFLAGS
trace_syscall_entry_irq_off:
LOAD_REG_IMMEDIATE(r10,MSR_KERNEL) /* doesn't include MSR_EE */
/* Note: We don't bother telling lockdep about it */
SYNC
- MTMSRD(r10)
+ mtmsr r10
lwz r9,TI_FLAGS(r2)
li r8,-MAX_ERRNO
andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
*/
ori r10,r10,MSR_EE
SYNC
- MTMSRD(r10)
+ mtmsr r10
/* Save NVGPRS if they're not saved already */
lwz r4,_TRAP(r1)
*/
.globl handle_page_fault
handle_page_fault:
- stw r4,_DAR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_BOOK3S_32
andis. r0,r5,DSISR_DABRMATCH@h
and. r0,r0,r11 /* FP or altivec or SPE enabled? */
beq+ 1f
andc r11,r11,r0
- MTMSRD(r11)
+ mtmsr r11
isync
1: stw r11,_MSR(r1)
mfcr r10
/* Note: We don't bother telling lockdep about it */
LOAD_REG_IMMEDIATE(r10,MSR_KERNEL)
SYNC /* Some chip revs have problems here... */
- MTMSRD(r10) /* disable interrupts */
+ mtmsr r10 /* disable interrupts */
lwz r3,_MSR(r1) /* Returning to user mode? */
andi. r0,r3,MSR_PR
*/
LOAD_REG_IMMEDIATE(r10,MSR_KERNEL & ~MSR_RI)
SYNC
- MTMSRD(r10) /* clear the RI bit */
+ mtmsr r10 /* clear the RI bit */
.globl exc_exit_restart
exc_exit_restart:
lwz r12,_NIP(r1)
#endif
ori r10,r10,MSR_EE
SYNC
- MTMSRD(r10) /* hard-enable interrupts */
+ mtmsr r10 /* hard-enable interrupts */
bl schedule
recheck:
/* Note: And we don't tell it we are disabling them again
*/
LOAD_REG_IMMEDIATE(r10,MSR_KERNEL)
SYNC
- MTMSRD(r10) /* disable interrupts */
+ mtmsr r10 /* disable interrupts */
lwz r9,TI_FLAGS(r2)
andi. r0,r9,_TIF_NEED_RESCHED
bne- do_resched
do_user_signal: /* r10 contains MSR_KERNEL here */
ori r10,r10,MSR_EE
SYNC
- MTMSRD(r10) /* hard-enable interrupts */
+ mtmsr r10 /* hard-enable interrupts */
/* save r13-r31 in the exception frame, if not already done */
lwz r3,_TRAP(r1)
andi. r0,r3,1
lis r6,1f@ha /* physical return address for rtas */
addi r6,r6,1f@l
tophys(r6,r6)
- tophys(r7,r1)
+ tophys_novmstack r7, r1
lwz r8,RTASENTRY(r4)
lwz r4,RTASBASE(r4)
mfmsr r9
stw r9,8(r1)
LOAD_REG_IMMEDIATE(r0,MSR_KERNEL)
SYNC /* disable interrupts so SRR0/1 */
- MTMSRD(r0) /* don't get trashed */
+ mtmsr r0 /* don't get trashed */
li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
mtlr r6
stw r7, THREAD + RTAS_SP(r2)
std r0,16(r1)
stdu r1,-SWITCH_FRAME_SIZE(r1)
/* r3-r13 are caller saved -- Cort */
- SAVE_8GPRS(14, r1)
- SAVE_10GPRS(22, r1)
+ SAVE_NVGPRS(r1)
std r0,_NIP(r1) /* Return to switch caller */
mfcr r23
std r23,_CCR(r1)
mtcrf 0xFF,r6
/* r3-r13 are destroyed -- Cort */
- REST_8GPRS(14, r1)
- REST_10GPRS(22, r1)
+ REST_NVGPRS(r1)
/* convert old thread to its task_struct for return value */
addi r3,r3,-THREAD
*/
SAVE_GPR(2, r1) /* Save the TOC */
SAVE_GPR(13, r1) /* Save paca */
- SAVE_8GPRS(14, r1) /* Save the non-volatiles */
- SAVE_10GPRS(22, r1) /* ditto */
+ SAVE_NVGPRS(r1) /* Save the non-volatiles */
mfcr r4
std r4,_CCR(r1)
/* relocation is on at this point */
REST_GPR(2, r1) /* Restore the TOC */
REST_GPR(13, r1) /* Restore paca */
- REST_8GPRS(14, r1) /* Restore the non-volatiles */
- REST_10GPRS(22, r1) /* ditto */
+ REST_NVGPRS(r1) /* Restore the non-volatiles */
GET_PACA(r13)
*/
SAVE_GPR(2, r1)
SAVE_GPR(13, r1)
- SAVE_8GPRS(14, r1)
- SAVE_10GPRS(22, r1)
+ SAVE_NVGPRS(r1)
mfcr r10
mfmsr r11
std r10,_CCR(r1)
/* Restore other registers */
REST_GPR(2, r1)
REST_GPR(13, r1)
- REST_8GPRS(14, r1)
- REST_10GPRS(22, r1)
+ REST_NVGPRS(r1)
ld r4,_CCR(r1)
mtcr r4
*
* Call convention:
*
- * syscall register convention is in Documentation/powerpc/syscall64-abi.rst
- *
- * For hypercalls, the register convention is as follows:
- * r0 volatile
- * r1-2 nonvolatile
- * r3 volatile parameter and return value for status
- * r4-r10 volatile input and output value
- * r11 volatile hypercall number and output value
- * r12 volatile input and output value
- * r13-r31 nonvolatile
- * LR nonvolatile
- * CTR volatile
- * XER volatile
- * CR0-1 CR5-7 volatile
- * CR2-4 nonvolatile
- * Other registers nonvolatile
+ * syscall and hypercalls register conventions are documented in
+ * Documentation/powerpc/syscall64-abi.rst and
+ * Documentation/powerpc/papr_hcalls.rst respectively.
*
* The intersection of volatile registers that don't contain possible
* inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry
DEFINE_FIXED_SYMBOL(__end_interrupts)
#ifdef CONFIG_PPC_970_NAP
+ /*
+ * Called by exception entry code if _TLF_NAPPING was set, this clears
+ * the NAPPING flag, and redirects the exception exit to
+ * power4_fixup_nap_return.
+ */
+ .globl power4_fixup_nap
EXC_COMMON_BEGIN(power4_fixup_nap)
andc r9,r9,r10
std r9,TI_LOCAL_FLAGS(r11)
- ld r10,_LINK(r1) /* make idle task do the */
- std r10,_NIP(r1) /* equivalent of a blr */
+ LOAD_REG_ADDR(r10, power4_idle_nap_return)
+ std r10,_NIP(r1)
+ blr
+
+power4_idle_nap_return:
blr
#endif
/* enable use of FP after return */
#ifdef CONFIG_PPC32
mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
+#ifdef CONFIG_VMAP_STACK
+ tovirt(r5, r5)
+#endif
lwz r4,THREAD_FPEXC_MODE(r5)
ori r9,r9,MSR_FP /* enable FP for current */
or r9,r9,r4
*/
. = 0x200
DO_KVM 0x200
- mtspr SPRN_SPRG_SCRATCH0,r10
- mtspr SPRN_SPRG_SCRATCH1,r11
- mfcr r10
+MachineCheck:
+ EXCEPTION_PROLOG_0
+#ifdef CONFIG_VMAP_STACK
+ li r11, MSR_KERNEL & ~(MSR_IR | MSR_RI) /* can take DTLB miss */
+ mtmsr r11
+ isync
+#endif
#ifdef CONFIG_PPC_CHRP
mfspr r11, SPRN_SPRG_THREAD
+ tovirt_vmstack r11, r11
lwz r11, RTAS_SP(r11)
cmpwi cr1, r11, 0
bne cr1, 7f
#endif /* CONFIG_PPC_CHRP */
- EXCEPTION_PROLOG_1
+ EXCEPTION_PROLOG_1 for_rtas=1
7: EXCEPTION_PROLOG_2
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_CHRP
. = 0x300
DO_KVM 0x300
DataAccess:
- EXCEPTION_PROLOG
- mfspr r10,SPRN_DSISR
- stw r10,_DSISR(r11)
+ EXCEPTION_PROLOG handle_dar_dsisr=1
+ get_and_save_dar_dsisr_on_stack r4, r5, r11
+BEGIN_MMU_FTR_SECTION
#ifdef CONFIG_PPC_KUAP
- andis. r0,r10,(DSISR_BAD_FAULT_32S | DSISR_DABRMATCH | DSISR_PROTFAULT)@h
+ andis. r0, r5, (DSISR_BAD_FAULT_32S | DSISR_DABRMATCH | DSISR_PROTFAULT)@h
#else
- andis. r0,r10,(DSISR_BAD_FAULT_32S|DSISR_DABRMATCH)@h
+ andis. r0, r5, (DSISR_BAD_FAULT_32S | DSISR_DABRMATCH)@h
#endif
- bne 1f /* if not, try to put a PTE */
- mfspr r4,SPRN_DAR /* into the hash table */
- rlwinm r3,r10,32-15,21,21 /* DSISR_STORE -> _PAGE_RW */
-BEGIN_MMU_FTR_SECTION
+ bne handle_page_fault_tramp_2 /* if not, try to put a PTE */
+ rlwinm r3, r5, 32 - 15, 21, 21 /* DSISR_STORE -> _PAGE_RW */
bl hash_page
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
-1: lwz r5,_DSISR(r11) /* get DSISR value */
- mfspr r4,SPRN_DAR
- EXC_XFER_LITE(0x300, handle_page_fault)
-
+ b handle_page_fault_tramp_1
+FTR_SECTION_ELSE
+ b handle_page_fault_tramp_2
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_HPTE_TABLE)
/* Instruction access exception. */
. = 0x400
END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
1: mr r4,r12
andis. r5,r9,DSISR_SRR1_MATCH_32S@h /* Filter relevant SRR1 bits */
+ stw r4, _DAR(r11)
EXC_XFER_LITE(0x400, handle_page_fault)
/* External interrupt */
. = 0x600
DO_KVM 0x600
Alignment:
- EXCEPTION_PROLOG
- mfspr r4,SPRN_DAR
- stw r4,_DAR(r11)
- mfspr r5,SPRN_DSISR
- stw r5,_DSISR(r11)
+ EXCEPTION_PROLOG handle_dar_dsisr=1
+ save_dar_dsisr_on_stack r4, r5, r11
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_STD(0x600, alignment_exception)
. = 0x3000
+handle_page_fault_tramp_1:
+ lwz r4, _DAR(r11)
+ lwz r5, _DSISR(r11)
+ /* fall through */
+handle_page_fault_tramp_2:
+ EXC_XFER_LITE(0x300, handle_page_fault)
+
+stack_overflow:
+ vmap_stack_overflow_exception
+
AltiVecUnavailable:
EXCEPTION_PROLOG
#ifdef CONFIG_ALTIVEC
ori r4,r4,2f@l
tophys(r4,r4)
li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+
+ .align 4
mtspr SPRN_SRR0,r4
mtspr SPRN_SRR1,r3
SYNC
rlwinm r0, r6, 0, ~MSR_RI
rlwinm r0, r0, 0, ~MSR_EE
mtmsr r0
+
+ .align 4
mtspr SPRN_SRR0, r4
mtspr SPRN_SRR1, r3
SYNC
andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */
beqlr
andc r3,r3,r0
+
+ .align 4
mtspr SPRN_SRR0,r4
mtspr SPRN_SRR1,r3
sync
* We assume sprg3 has the physical address of the current
* task's thread_struct.
*/
+.macro EXCEPTION_PROLOG handle_dar_dsisr=0
+ EXCEPTION_PROLOG_0 handle_dar_dsisr=\handle_dar_dsisr
+ EXCEPTION_PROLOG_1
+ EXCEPTION_PROLOG_2 handle_dar_dsisr=\handle_dar_dsisr
+.endm
-.macro EXCEPTION_PROLOG
+.macro EXCEPTION_PROLOG_0 handle_dar_dsisr=0
mtspr SPRN_SPRG_SCRATCH0,r10
mtspr SPRN_SPRG_SCRATCH1,r11
+#ifdef CONFIG_VMAP_STACK
+ mfspr r10, SPRN_SPRG_THREAD
+ .if \handle_dar_dsisr
+ mfspr r11, SPRN_DAR
+ stw r11, DAR(r10)
+ mfspr r11, SPRN_DSISR
+ stw r11, DSISR(r10)
+ .endif
+ mfspr r11, SPRN_SRR0
+ stw r11, SRR0(r10)
+#endif
+ mfspr r11, SPRN_SRR1 /* check whether user or kernel */
+#ifdef CONFIG_VMAP_STACK
+ stw r11, SRR1(r10)
+#endif
mfcr r10
- EXCEPTION_PROLOG_1
- EXCEPTION_PROLOG_2
+ andi. r11, r11, MSR_PR
.endm
-.macro EXCEPTION_PROLOG_1
- mfspr r11,SPRN_SRR1 /* check whether user or kernel */
- andi. r11,r11,MSR_PR
+.macro EXCEPTION_PROLOG_1 for_rtas=0
+#ifdef CONFIG_VMAP_STACK
+ .ifeq \for_rtas
+ li r11, MSR_KERNEL & ~(MSR_IR | MSR_RI) /* can take DTLB miss */
+ mtmsr r11
+ isync
+ .endif
+ subi r11, r1, INT_FRAME_SIZE /* use r1 if kernel */
+#else
tophys(r11,r1) /* use tophys(r1) if kernel */
+ subi r11, r11, INT_FRAME_SIZE /* alloc exc. frame */
+#endif
beq 1f
mfspr r11,SPRN_SPRG_THREAD
+ tovirt_vmstack r11, r11
lwz r11,TASK_STACK-THREAD(r11)
- addi r11,r11,THREAD_SIZE
- tophys(r11,r11)
-1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
+ addi r11, r11, THREAD_SIZE - INT_FRAME_SIZE
+ tophys_novmstack r11, r11
+1:
+#ifdef CONFIG_VMAP_STACK
+ mtcrf 0x7f, r11
+ bt 32 - THREAD_ALIGN_SHIFT, stack_overflow
+#endif
.endm
-.macro EXCEPTION_PROLOG_2
+.macro EXCEPTION_PROLOG_2 handle_dar_dsisr=0
stw r10,_CCR(r11) /* save registers */
stw r12,GPR12(r11)
stw r9,GPR9(r11)
stw r12,GPR11(r11)
mflr r10
stw r10,_LINK(r11)
+#ifdef CONFIG_VMAP_STACK
+ mfspr r12, SPRN_SPRG_THREAD
+ tovirt(r12, r12)
+ .if \handle_dar_dsisr
+ lwz r10, DAR(r12)
+ stw r10, _DAR(r11)
+ lwz r10, DSISR(r12)
+ stw r10, _DSISR(r11)
+ .endif
+ lwz r9, SRR1(r12)
+ lwz r12, SRR0(r12)
+#else
mfspr r12,SPRN_SRR0
mfspr r9,SPRN_SRR1
+#endif
stw r1,GPR1(r11)
stw r1,0(r11)
- tovirt(r1,r11) /* set new kernel sp */
+ tovirt_novmstack r1, r11 /* set new kernel sp */
#ifdef CONFIG_40x
rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */
+#else
+#ifdef CONFIG_VMAP_STACK
+ li r10, MSR_KERNEL & ~MSR_IR /* can take exceptions */
#else
li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR) /* can take exceptions */
- MTMSRD(r10) /* (except for mach check in rtas) */
+#endif
+ mtmsr r10 /* (except for mach check in rtas) */
#endif
stw r0,GPR0(r11)
lis r10,STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
.macro SYSCALL_ENTRY trapno
mfspr r12,SPRN_SPRG_THREAD
+#ifdef CONFIG_VMAP_STACK
+ mfspr r9, SPRN_SRR0
+ mfspr r11, SPRN_SRR1
+ stw r9, SRR0(r12)
+ stw r11, SRR1(r12)
+#endif
mfcr r10
lwz r11,TASK_STACK-THREAD(r12)
- mflr r9
- addi r11,r11,THREAD_SIZE - INT_FRAME_SIZE
rlwinm r10,r10,0,4,2 /* Clear SO bit in CR */
- tophys(r11,r11)
+ addi r11, r11, THREAD_SIZE - INT_FRAME_SIZE
+#ifdef CONFIG_VMAP_STACK
+ li r9, MSR_KERNEL & ~(MSR_IR | MSR_RI) /* can take DTLB miss */
+ mtmsr r9
+ isync
+#endif
+ tovirt_vmstack r12, r12
+ tophys_novmstack r11, r11
+ mflr r9
stw r10,_CCR(r11) /* save registers */
+ stw r9, _LINK(r11)
+#ifdef CONFIG_VMAP_STACK
+ lwz r10, SRR0(r12)
+ lwz r9, SRR1(r12)
+#else
mfspr r10,SPRN_SRR0
- stw r9,_LINK(r11)
mfspr r9,SPRN_SRR1
+#endif
stw r1,GPR1(r11)
stw r1,0(r11)
- tovirt(r1,r11) /* set new kernel sp */
+ tovirt_novmstack r1, r11 /* set new kernel sp */
stw r10,_NIP(r11)
#ifdef CONFIG_40x
rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */
+#else
+#ifdef CONFIG_VMAP_STACK
+ LOAD_REG_IMMEDIATE(r10, MSR_KERNEL & ~MSR_IR) /* can take exceptions */
#else
LOAD_REG_IMMEDIATE(r10, MSR_KERNEL & ~(MSR_IR|MSR_DR)) /* can take exceptions */
- MTMSRD(r10) /* (except for mach check in rtas) */
+#endif
+ mtmsr r10 /* (except for mach check in rtas) */
#endif
lis r10,STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
stw r2,GPR2(r11)
#endif
3:
- tovirt(r2, r2) /* set r2 to current */
+ tovirt_novmstack r2, r2 /* set r2 to current */
lis r11, transfer_to_syscall@h
ori r11, r11, transfer_to_syscall@l
#ifdef CONFIG_TRACE_IRQFLAGS
RFI /* jump to handler, enable MMU */
.endm
+.macro save_dar_dsisr_on_stack reg1, reg2, sp
+#ifndef CONFIG_VMAP_STACK
+ mfspr \reg1, SPRN_DAR
+ mfspr \reg2, SPRN_DSISR
+ stw \reg1, _DAR(\sp)
+ stw \reg2, _DSISR(\sp)
+#endif
+.endm
+
+.macro get_and_save_dar_dsisr_on_stack reg1, reg2, sp
+#ifdef CONFIG_VMAP_STACK
+ lwz \reg1, _DAR(\sp)
+ lwz \reg2, _DSISR(\sp)
+#else
+ save_dar_dsisr_on_stack \reg1, \reg2, \sp
+#endif
+.endm
+
+.macro tovirt_vmstack dst, src
+#ifdef CONFIG_VMAP_STACK
+ tovirt(\dst, \src)
+#else
+ .ifnc \dst, \src
+ mr \dst, \src
+ .endif
+#endif
+.endm
+
+.macro tovirt_novmstack dst, src
+#ifndef CONFIG_VMAP_STACK
+ tovirt(\dst, \src)
+#else
+ .ifnc \dst, \src
+ mr \dst, \src
+ .endif
+#endif
+.endm
+
+.macro tophys_novmstack dst, src
+#ifndef CONFIG_VMAP_STACK
+ tophys(\dst, \src)
+#else
+ .ifnc \dst, \src
+ mr \dst, \src
+ .endif
+#endif
+.endm
+
/*
* Note: code which follows this uses cr0.eq (set if from kernel),
* r11, r12 (SRR0), and r9 (SRR1).
EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, transfer_to_handler, \
ret_from_except)
+.macro vmap_stack_overflow_exception
+#ifdef CONFIG_VMAP_STACK
+#ifdef CONFIG_SMP
+ mfspr r11, SPRN_SPRG_THREAD
+ tovirt(r11, r11)
+ lwz r11, TASK_CPU - THREAD(r11)
+ slwi r11, r11, 3
+ addis r11, r11, emergency_ctx@ha
+#else
+ lis r11, emergency_ctx@ha
+#endif
+ lwz r11, emergency_ctx@l(r11)
+ cmpwi cr1, r11, 0
+ bne cr1, 1f
+ lis r11, init_thread_union@ha
+ addi r11, r11, init_thread_union@l
+1: addi r11, r11, THREAD_SIZE - INT_FRAME_SIZE
+ EXCEPTION_PROLOG_2
+ SAVE_NVGPRS(r11)
+ addi r3, r1, STACK_FRAME_OVERHEAD
+ EXC_XFER_STD(0, stack_overflow_exception)
+#endif
+.endm
+
#endif /* __HEAD_32_H__ */
START_EXCEPTION(0x0400, InstructionAccess)
EXCEPTION_PROLOG
mr r4,r12 /* Pass SRR0 as arg2 */
+ stw r4, _DEAR(r11)
li r5,0 /* Pass zero as arg3 */
EXC_XFER_LITE(0x400, handle_page_fault)
mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
stw r5,_ESR(r11)
mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
+ stw r4, _DEAR(r11)
EXC_XFER_LITE(0x300, handle_page_fault)
/* Other PowerPC processors, namely those derived from the 6xx-series
/* Machine check */
. = 0x200
MachineCheck:
- EXCEPTION_PROLOG
- mfspr r4,SPRN_DAR
- stw r4,_DAR(r11)
- li r5,RPN_PATTERN
- mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */
- mfspr r5,SPRN_DSISR
- stw r5,_DSISR(r11)
+ EXCEPTION_PROLOG handle_dar_dsisr=1
+ save_dar_dsisr_on_stack r4, r5, r11
+ li r6, RPN_PATTERN
+ mtspr SPRN_DAR, r6 /* Tag DAR, to be used in DTLB Error */
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_STD(0x200, machine_check_exception)
-/* Data access exception.
- * This is "never generated" by the MPC8xx.
- */
- . = 0x300
-DataAccess:
-
-/* Instruction access exception.
- * This is "never generated" by the MPC8xx.
- */
- . = 0x400
-InstructionAccess:
-
/* External interrupt */
EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
/* Alignment exception */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
- mfspr r4,SPRN_DAR
- stw r4,_DAR(r11)
- li r5,RPN_PATTERN
- mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */
- mfspr r5,SPRN_DSISR
- stw r5,_DSISR(r11)
+ EXCEPTION_PROLOG handle_dar_dsisr=1
+ save_dar_dsisr_on_stack r4, r5, r11
+ li r6, RPN_PATTERN
+ mtspr SPRN_DAR, r6 /* Tag DAR, to be used in DTLB Error */
addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_STD(0x600, alignment_exception)
+ b .Lalignment_exception_ool
/* Program check exception */
EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
-/* No FPU on MPC8xx. This exception is not supposed to happen.
-*/
- EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
-
/* Decrementer */
EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
- EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_STD)
- EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_STD)
+ /* With VMAP_STACK there's not enough room for this at 0x600 */
+ . = 0xa00
+.Lalignment_exception_ool:
+ EXC_XFER_STD(0x600, alignment_exception)
/* System call */
. = 0xc00
/* Single step - not used on 601 */
EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
- EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_STD)
- EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_STD)
/* On the MPC8xx, this is a software emulation interrupt. It occurs
* for all unimplemented and illegal instructions.
*/
EXCEPTION(0x1000, SoftEmu, program_check_exception, EXC_XFER_STD)
-/* Called from DataStoreTLBMiss when perf TLB misses events are activated */
-#ifdef CONFIG_PERF_EVENTS
- patch_site 0f, patch__dtlbmiss_perf
-0: lwz r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
- addi r10, r10, 1
- stw r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
- mfspr r10, SPRN_SPRG_SCRATCH0
- mfspr r11, SPRN_SPRG_SCRATCH1
- rfi
-#endif
-
. = 0x1100
/*
* For the MPC8xx, this is a software tablewalk to load the instruction
. = 0x1200
DataStoreTLBMiss:
- mtspr SPRN_SPRG_SCRATCH0, r10
- mtspr SPRN_SPRG_SCRATCH1, r11
+ mtspr SPRN_DAR, r10
+ mtspr SPRN_M_TW, r11
mfcr r11
/* If we are faulting a kernel address, we have to use the
mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
/* Restore registers */
- mtspr SPRN_DAR, r11 /* Tag DAR */
-0: mfspr r10, SPRN_SPRG_SCRATCH0
- mfspr r11, SPRN_SPRG_SCRATCH1
+0: mfspr r10, SPRN_DAR
+ mtspr SPRN_DAR, r11 /* Tag DAR */
+ mfspr r11, SPRN_M_TW
rfi
patch_site 0b, patch__dtlbmiss_exit_1
mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
li r11, RPN_PATTERN
- mtspr SPRN_DAR, r11 /* Tag DAR */
-0: mfspr r10, SPRN_SPRG_SCRATCH0
- mfspr r11, SPRN_SPRG_SCRATCH1
+0: mfspr r10, SPRN_DAR
+ mtspr SPRN_DAR, r11 /* Tag DAR */
+ mfspr r11, SPRN_M_TW
rfi
patch_site 0b, patch__dtlbmiss_exit_2
mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
li r11, RPN_PATTERN
- mtspr SPRN_DAR, r11 /* Tag DAR */
-0: mfspr r10, SPRN_SPRG_SCRATCH0
- mfspr r11, SPRN_SPRG_SCRATCH1
+0: mfspr r10, SPRN_DAR
+ mtspr SPRN_DAR, r11 /* Tag DAR */
+ mfspr r11, SPRN_M_TW
rfi
patch_site 0b, patch__dtlbmiss_exit_3
tlbie r4
/* 0x400 is InstructionAccess exception, needed by bad_page_fault() */
.Litlbie:
+ stw r4, _DAR(r11)
EXC_XFER_LITE(0x400, handle_page_fault)
/* This is the data TLB error on the MPC8xx. This could be due to
*/
. = 0x1400
DataTLBError:
- mtspr SPRN_SPRG_SCRATCH0, r10
- mtspr SPRN_SPRG_SCRATCH1, r11
- mfcr r10
-
+ EXCEPTION_PROLOG_0 handle_dar_dsisr=1
mfspr r11, SPRN_DAR
- cmpwi cr0, r11, RPN_PATTERN
- beq- FixupDAR /* must be a buggy dcbX, icbi insn. */
+ cmpwi cr1, r11, RPN_PATTERN
+ beq- cr1, FixupDAR /* must be a buggy dcbX, icbi insn. */
DARFixed:/* Return from dcbx instruction bug workaround */
+#ifdef CONFIG_VMAP_STACK
+ li r11, RPN_PATTERN
+ mtspr SPRN_DAR, r11 /* Tag DAR, to be used in DTLB Error */
+#endif
EXCEPTION_PROLOG_1
- EXCEPTION_PROLOG_2
- mfspr r5,SPRN_DSISR
- stw r5,_DSISR(r11)
- mfspr r4,SPRN_DAR
+ EXCEPTION_PROLOG_2 handle_dar_dsisr=1
+ get_and_save_dar_dsisr_on_stack r4, r5, r11
andis. r10,r5,DSISR_NOHPTE@h
beq+ .Ldtlbie
tlbie r4
.Ldtlbie:
+#ifndef CONFIG_VMAP_STACK
li r10,RPN_PATTERN
mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */
+#endif
/* 0x300 is DataAccess exception, needed by bad_page_fault() */
EXC_XFER_LITE(0x300, handle_page_fault)
- EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_STD)
- EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_STD)
- EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_STD)
- EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_STD)
- EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_STD)
- EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_STD)
- EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_STD)
+/* Called from DataStoreTLBMiss when perf TLB misses events are activated */
+#ifdef CONFIG_PERF_EVENTS
+ patch_site 0f, patch__dtlbmiss_perf
+0: lwz r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
+ addi r10, r10, 1
+ stw r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
+ mfspr r10, SPRN_DAR
+ mtspr SPRN_DAR, r11 /* Tag DAR */
+ mfspr r11, SPRN_M_TW
+ rfi
+#endif
+
+stack_overflow:
+ vmap_stack_overflow_exception
/* On the MPC8xx, these next four traps are used for development
* support of breakpoints and such. Someday I will get around to
* using them.
*/
- . = 0x1c00
-DataBreakpoint:
- mtspr SPRN_SPRG_SCRATCH0, r10
- mtspr SPRN_SPRG_SCRATCH1, r11
- mfcr r10
- mfspr r11, SPRN_SRR0
- cmplwi cr0, r11, (.Ldtlbie - PAGE_OFFSET)@l
- cmplwi cr7, r11, (.Litlbie - PAGE_OFFSET)@l
- beq- cr0, 11f
- beq- cr7, 11f
+do_databreakpoint:
EXCEPTION_PROLOG_1
- EXCEPTION_PROLOG_2
+ EXCEPTION_PROLOG_2 handle_dar_dsisr=1
addi r3,r1,STACK_FRAME_OVERHEAD
mfspr r4,SPRN_BAR
stw r4,_DAR(r11)
+#ifdef CONFIG_VMAP_STACK
+ lwz r5,_DSISR(r11)
+#else
mfspr r5,SPRN_DSISR
+#endif
EXC_XFER_STD(0x1c00, do_break)
-11:
+
+ . = 0x1c00
+DataBreakpoint:
+ EXCEPTION_PROLOG_0 handle_dar_dsisr=1
+ mfspr r11, SPRN_SRR0
+ cmplwi cr1, r11, (.Ldtlbie - PAGE_OFFSET)@l
+ cmplwi cr7, r11, (.Litlbie - PAGE_OFFSET)@l
+ cror 4*cr1+eq, 4*cr1+eq, 4*cr7+eq
+ bne cr1, do_databreakpoint
mtcr r10
mfspr r10, SPRN_SPRG_SCRATCH0
mfspr r11, SPRN_SPRG_SCRATCH1
mfspr r10, SPRN_SRR0
mtspr SPRN_MD_EPN, r10
rlwinm r11, r10, 16, 0xfff8
- cmpli cr0, r11, PAGE_OFFSET@h
+ cmpli cr1, r11, PAGE_OFFSET@h
mfspr r11, SPRN_M_TWB /* Get level 1 table */
- blt+ 3f
+ blt+ cr1, 3f
rlwinm r11, r10, 16, 0xfff8
0: cmpli cr7, r11, (PAGE_OFFSET + 0x1800000)@h
3:
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */
mtspr SPRN_MD_TWC, r11
- mtcr r11
+ mtcrf 0x01, r11
mfspr r11, SPRN_MD_TWC
lwz r11, 0(r11) /* Get the pte */
bt 28,200f /* bit 28 = Large page (8M) */
* no need to include them here */
xoris r10, r11, 0x7c00 /* check if major OP code is 31 */
rlwinm r10, r10, 0, 21, 5
- cmpwi cr0, r10, 2028 /* Is dcbz? */
- beq+ 142f
- cmpwi cr0, r10, 940 /* Is dcbi? */
- beq+ 142f
- cmpwi cr0, r10, 108 /* Is dcbst? */
- beq+ 144f /* Fix up store bit! */
- cmpwi cr0, r10, 172 /* Is dcbf? */
- beq+ 142f
- cmpwi cr0, r10, 1964 /* Is icbi? */
- beq+ 142f
+ cmpwi cr1, r10, 2028 /* Is dcbz? */
+ beq+ cr1, 142f
+ cmpwi cr1, r10, 940 /* Is dcbi? */
+ beq+ cr1, 142f
+ cmpwi cr1, r10, 108 /* Is dcbst? */
+ beq+ cr1, 144f /* Fix up store bit! */
+ cmpwi cr1, r10, 172 /* Is dcbf? */
+ beq+ cr1, 142f
+ cmpwi cr1, r10, 1964 /* Is icbi? */
+ beq+ cr1, 142f
141: mfspr r10,SPRN_M_TW
b DARFixed /* Nope, go back to normal TLB processing */
add r10, r10, r30 ;b 151f
add r10, r10, r31
151:
- rlwinm. r11,r11,19,24,28 /* offset into jump table for reg RA */
- beq 152f /* if reg RA is zero, don't add it */
+ rlwinm r11,r11,19,24,28 /* offset into jump table for reg RA */
+ cmpwi cr1, r11, 0
+ beq cr1, 152f /* if reg RA is zero, don't add it */
addi r11, r11, 150b@l /* add start of table */
mtctr r11 /* load ctr with jump address */
rlwinm r11,r11,0,16,10 /* make sure we don't execute this more than once */
152:
mfdar r11
mtctr r11 /* restore ctr reg from DAR */
+#ifdef CONFIG_VMAP_STACK
+ mfspr r11, SPRN_SPRG_THREAD
+ stw r10, DAR(r11)
+ mfspr r10, SPRN_DSISR
+ stw r10, DSISR(r11)
+#else
mtdar r10 /* save fault EA to DAR */
+#endif
mfspr r10,SPRN_M_TW
b DARFixed /* Go back to normal TLB handling */
mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
stw r5,_ESR(r11); \
mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \
+ stw r4, _DEAR(r11); \
EXC_XFER_LITE(0x0300, handle_page_fault)
#define INSTRUCTION_STORAGE_EXCEPTION \
mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
stw r5,_ESR(r11); \
mr r4,r12; /* Pass SRR0 as arg2 */ \
+ stw r4, _DEAR(r11); \
li r5,0; /* Pass zero as arg3 */ \
EXC_XFER_LITE(0x0400, handle_page_fault)
mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
andis. r10,r5,(ESR_ILK|ESR_DLK)@h
bne 1f
+ stw r4, _DEAR(r11)
EXC_XFER_LITE(0x0300, handle_page_fault)
1:
addi r3,r1,STACK_FRAME_OVERHEAD
/* DAWR region can't cross 512 bytes boundary */
if ((start_addr >> 9) != (end_addr >> 9))
return -EINVAL;
+ } else if (IS_ENABLED(CONFIG_PPC_8xx)) {
+ /* 8xx can setup a range without limitation */
+ max_len = U16_MAX;
}
if (hw_len > max_len)
}
info->type &= ~HW_BRK_TYPE_EXTRANEOUS_IRQ;
- if (IS_ENABLED(CONFIG_PPC_8xx)) {
- if (!dar_within_range(regs->dar, info))
- info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
- } else {
- if (!stepping_handler(regs, bp, info))
- goto out;
- }
+ if (!dar_within_range(regs->dar, info))
+ info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
+
+ if (!IS_ENABLED(CONFIG_PPC_8xx) && !stepping_handler(regs, bp, info))
+ goto out;
/*
* As a policy, the callback is invoked in a 'trigger-after-execute'
int powersave_nap;
+#ifdef CONFIG_PPC_970_NAP
+void power4_idle(void)
+{
+ if (!cpu_has_feature(CPU_FTR_CAN_NAP))
+ return;
+
+ if (!powersave_nap)
+ return;
+
+ if (!prep_irq_for_idle())
+ return;
+
+ if (cpu_has_feature(CPU_FTR_ALTIVEC))
+ asm volatile("DSSALL ; sync" ::: "memory");
+
+ power4_idle_nap();
+
+ /*
+ * power4_idle_nap returns with interrupts enabled (soft and hard).
+ * to our caller with interrupts enabled (soft and hard). Our caller
+ * can cope with either interrupts disabled or enabled upon return.
+ */
+}
+#endif
+
#ifdef CONFIG_SYSCTL
/*
* Register the sysctl to set/clear powersave_nap.
#include <asm/asm-offsets.h>
#include <asm/ppc-opcode.h>
#include <asm/cpuidle.h>
+#include <asm/thread_info.h> /* TLF_NAPPING */
+#ifdef CONFIG_PPC_P7_NAP
/*
* Desired PSSCR in r3
*
bne 2f
IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP)
2: IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE)
+#endif
+#ifdef CONFIG_PPC_970_NAP
+_GLOBAL(power4_idle_nap)
+ LOAD_REG_IMMEDIATE(r7, MSR_KERNEL|MSR_EE|MSR_POW)
+ ld r9,PACA_THREAD_INFO(r13)
+ ld r8,TI_LOCAL_FLAGS(r9)
+ ori r8,r8,_TLF_NAPPING
+ std r8,TI_LOCAL_FLAGS(r9)
+ /*
+ * NAPPING bit is set, from this point onward power4_fixup_nap
+ * will cause exceptions to return to power4_idle_nap_return.
+ */
+1: sync
+ isync
+ mtmsrd r7
+ isync
+ b 1b
+#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * This file contains the power_save function for 970-family CPUs.
- */
-
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/irqflags.h>
-#include <asm/hw_irq.h>
-#include <asm/feature-fixups.h>
-
-#undef DEBUG
-
- .text
-
-_GLOBAL(power4_idle)
-BEGIN_FTR_SECTION
- blr
-END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
- /* Now check if user or arch enabled NAP mode */
- LOAD_REG_ADDRBASE(r3,powersave_nap)
- lwz r4,ADDROFF(powersave_nap)(r3)
- cmpwi 0,r4,0
- beqlr
-
- /* This sequence is similar to prep_irq_for_idle() */
-
- /* Hard disable interrupts */
- mfmsr r7
- rldicl r0,r7,48,1
- rotldi r0,r0,16
- mtmsrd r0,1
-
- /* Check if something happened while soft-disabled */
- lbz r0,PACAIRQHAPPENED(r13)
- cmpwi cr0,r0,0
- bne- 2f
-
- /*
- * Soft-enable interrupts. This will make power4_fixup_nap return
- * to our caller with interrupts enabled (soft and hard). The caller
- * can cope with either interrupts disabled or enabled upon return.
- */
-#ifdef CONFIG_TRACE_IRQFLAGS
- /* Tell the tracer interrupts are on, because idle responds to them. */
- mflr r0
- std r0,16(r1)
- stdu r1,-128(r1)
- bl trace_hardirqs_on
- addi r1,r1,128
- ld r0,16(r1)
- mtlr r0
- mfmsr r7
-#endif /* CONFIG_TRACE_IRQFLAGS */
-
- li r0,IRQS_ENABLED
- stb r0,PACAIRQSOFTMASK(r13) /* we'll hard-enable shortly */
-BEGIN_FTR_SECTION
- DSSALL
- sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- ld r9, PACA_THREAD_INFO(r13)
- ld r8,TI_LOCAL_FLAGS(r9) /* set napping bit */
- ori r8,r8,_TLF_NAPPING /* so when we take an exception */
- std r8,TI_LOCAL_FLAGS(r9) /* it will return to our caller */
- ori r7,r7,MSR_EE
- oris r7,r7,MSR_POW@h
-1: sync
- isync
- mtmsrd r7
- isync
- b 1b
-
-2: /* Return if an interrupt had happened while soft disabled */
- /* Set the HARD_DIS flag because interrupts are now hard disabled */
- ori r0,r0,PACA_IRQ_HARD_DIS
- stb r0,PACAIRQHAPPENED(r13)
- blr
#include <linux/debugfs.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/vmalloc.h>
#include <linux/uaccess.h>
#include <asm/io.h>
set_irq_regs(old_regs);
}
+static void *__init alloc_vm_stack(void)
+{
+ return __vmalloc_node_range(THREAD_SIZE, THREAD_ALIGN, VMALLOC_START,
+ VMALLOC_END, THREADINFO_GFP, PAGE_KERNEL,
+ 0, NUMA_NO_NODE, (void*)_RET_IP_);
+}
+
+static void __init vmap_irqstack_init(void)
+{
+ int i;
+
+ for_each_possible_cpu(i) {
+ softirq_ctx[i] = alloc_vm_stack();
+ hardirq_ctx[i] = alloc_vm_stack();
+ }
+}
+
+
void __init init_IRQ(void)
{
+ if (IS_ENABLED(CONFIG_VMAP_STACK))
+ vmap_irqstack_init();
+
if (ppc_md.init_IRQ)
ppc_md.init_IRQ();
}
#endif /* CONFIG_PCI_IOV */
-void pcibios_bus_add_device(struct pci_dev *pdev)
-{
- if (ppc_md.pcibios_bus_add_device)
- ppc_md.pcibios_bus_add_device(pdev);
-}
-
static resource_size_t pcibios_io_size(const struct pci_controller *hose)
{
#ifdef CONFIG_PPC64
phb->controller_ops.dma_bus_setup(bus);
}
-static void pcibios_setup_device(struct pci_dev *dev)
+void pcibios_bus_add_device(struct pci_dev *dev)
{
struct pci_controller *phb;
/* Fixup NUMA node as it may not be setup yet by the generic
pci_read_irq_line(dev);
if (ppc_md.pci_irq_fixup)
ppc_md.pci_irq_fixup(dev);
+
+ if (ppc_md.pcibios_bus_add_device)
+ ppc_md.pcibios_bus_add_device(dev);
}
int pcibios_add_device(struct pci_dev *dev)
{
- /*
- * We can only call pcibios_setup_device() after bus setup is complete,
- * since some of the platform specific DMA setup code depends on it.
- */
- if (dev->bus->is_added)
- pcibios_setup_device(dev);
-
#ifdef CONFIG_PCI_IOV
if (ppc_md.pcibios_fixup_sriov)
ppc_md.pcibios_fixup_sriov(dev);
return 0;
}
-void pcibios_setup_bus_devices(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- pr_debug("PCI: Fixup bus devices %d (%s)\n",
- bus->number, bus->self ? pci_name(bus->self) : "PHB");
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- /* Cardbus can call us to add new devices to a bus, so ignore
- * those who are already fully discovered
- */
- if (pci_dev_is_added(dev))
- continue;
-
- pcibios_setup_device(dev);
- }
-}
-
void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
/* Now fixup the bus bus */
pcibios_setup_bus_self(bus);
-
- /* Now fixup devices on that bus */
- pcibios_setup_bus_devices(bus);
}
EXPORT_SYMBOL(pcibios_fixup_bus);
-void pci_fixup_cardbus(struct pci_bus *bus)
-{
- /* Now fixup devices on that bus */
- pcibios_setup_bus_devices(bus);
-}
-
-
static int skip_isa_ioresource_align(struct pci_dev *dev)
{
if (pci_has_flag(PCI_CAN_SKIP_ISA_ALIGN) &&
*/
slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
- pcibios_setup_bus_devices(bus);
max = bus->busn_res.start;
/*
* Scan bridges that are already configured. We don't touch
}
#ifdef CONFIG_PCI_IOV
-static struct pci_dn *add_one_dev_pci_data(struct pci_dn *parent,
+static struct pci_dn *add_one_sriov_vf_pdn(struct pci_dn *parent,
int vf_index,
int busno, int devfn)
{
return pdn;
}
-#endif
-struct pci_dn *add_dev_pci_data(struct pci_dev *pdev)
+struct pci_dn *add_sriov_vf_pdns(struct pci_dev *pdev)
{
-#ifdef CONFIG_PCI_IOV
struct pci_dn *parent, *pdn;
int i;
/* Only support IOV for now */
- if (!pdev->is_physfn)
- return pci_get_pdn(pdev);
+ if (WARN_ON(!pdev->is_physfn))
+ return NULL;
/* Check if VFs have been populated */
pdn = pci_get_pdn(pdev);
for (i = 0; i < pci_sriov_get_totalvfs(pdev); i++) {
struct eeh_dev *edev __maybe_unused;
- pdn = add_one_dev_pci_data(parent, i,
+ pdn = add_one_sriov_vf_pdn(parent, i,
pci_iov_virtfn_bus(pdev, i),
pci_iov_virtfn_devfn(pdev, i));
if (!pdn) {
edev->physfn = pdev;
#endif /* CONFIG_EEH */
}
-#endif /* CONFIG_PCI_IOV */
-
return pci_get_pdn(pdev);
}
-void remove_dev_pci_data(struct pci_dev *pdev)
+void remove_sriov_vf_pdns(struct pci_dev *pdev)
{
-#ifdef CONFIG_PCI_IOV
struct pci_dn *parent;
struct pci_dn *pdn, *tmp;
int i;
- /*
- * VF and VF PE are created/released dynamically, so we need to
- * bind/unbind them. Otherwise the VF and VF PE would be mismatched
- * when re-enabling SR-IOV.
- */
- if (pdev->is_virtfn) {
- pdn = pci_get_pdn(pdev);
- pdn->pe_number = IODA_INVALID_PE;
- return;
- }
-
/* Only support IOV PF for now */
- if (!pdev->is_physfn)
+ if (WARN_ON(!pdev->is_physfn))
return;
/* Check if VFs have been populated */
continue;
#ifdef CONFIG_EEH
- /* Release EEH device for the VF */
+ /*
+ * Release EEH state for this VF. The PCI core
+ * has already torn down the pci_dev for this VF, but
+ * we're responsible to removing the eeh_dev since it
+ * has the same lifetime as the pci_dn that spawned it.
+ */
edev = pdn_to_eeh_dev(pdn);
if (edev) {
+ /*
+ * We allocate pci_dn's for the totalvfs count,
+ * but only only the vfs that were activated
+ * have a configured PE.
+ */
+ if (edev->pe)
+ eeh_rmv_from_parent_pe(edev);
+
pdn->edev = NULL;
kfree(edev);
}
kfree(pdn);
}
}
-#endif /* CONFIG_PCI_IOV */
}
+#endif /* CONFIG_PCI_IOV */
struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
struct device_node *dn)
*/
if (!rescan_existing)
pcibios_setup_bus_self(bus);
- pcibios_setup_bus_devices(bus);
/* Now scan child busses */
for_each_pci_bridge(dev, bus)
mtspr(SPRN_DABRX, dabrx);
return 0;
}
-#elif defined(CONFIG_PPC_8xx)
-static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
-{
- unsigned long addr = dabr & ~HW_BRK_TYPE_DABR;
- unsigned long lctrl1 = 0x90000000; /* compare type: equal on E & F */
- unsigned long lctrl2 = 0x8e000002; /* watchpoint 1 on cmp E | F */
-
- if ((dabr & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_READ)
- lctrl1 |= 0xa0000;
- else if ((dabr & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_WRITE)
- lctrl1 |= 0xf0000;
- else if ((dabr & HW_BRK_TYPE_RDWR) == 0)
- lctrl2 = 0;
-
- mtspr(SPRN_LCTRL2, 0);
- mtspr(SPRN_CMPE, addr);
- mtspr(SPRN_CMPF, addr + 4);
- mtspr(SPRN_LCTRL1, lctrl1);
- mtspr(SPRN_LCTRL2, lctrl2);
-
- return 0;
-}
#else
static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
{
return __set_dabr(dabr, dabrx);
}
+static inline int set_breakpoint_8xx(struct arch_hw_breakpoint *brk)
+{
+ unsigned long lctrl1 = LCTRL1_CTE_GT | LCTRL1_CTF_LT | LCTRL1_CRWE_RW |
+ LCTRL1_CRWF_RW;
+ unsigned long lctrl2 = LCTRL2_LW0EN | LCTRL2_LW0LADC | LCTRL2_SLW0EN;
+ unsigned long start_addr = brk->address & ~HW_BREAKPOINT_ALIGN;
+ unsigned long end_addr = (brk->address + brk->len - 1) | HW_BREAKPOINT_ALIGN;
+
+ if (start_addr == 0)
+ lctrl2 |= LCTRL2_LW0LA_F;
+ else if (end_addr == ~0U)
+ lctrl2 |= LCTRL2_LW0LA_E;
+ else
+ lctrl2 |= LCTRL2_LW0LA_EandF;
+
+ mtspr(SPRN_LCTRL2, 0);
+
+ if ((brk->type & HW_BRK_TYPE_RDWR) == 0)
+ return 0;
+
+ if ((brk->type & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_READ)
+ lctrl1 |= LCTRL1_CRWE_RO | LCTRL1_CRWF_RO;
+ if ((brk->type & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_WRITE)
+ lctrl1 |= LCTRL1_CRWE_WO | LCTRL1_CRWF_WO;
+
+ mtspr(SPRN_CMPE, start_addr - 1);
+ mtspr(SPRN_CMPF, end_addr + 1);
+ mtspr(SPRN_LCTRL1, lctrl1);
+ mtspr(SPRN_LCTRL2, lctrl2);
+
+ return 0;
+}
+
void __set_breakpoint(struct arch_hw_breakpoint *brk)
{
memcpy(this_cpu_ptr(¤t_brk), brk, sizeof(*brk));
if (dawr_enabled())
// Power8 or later
set_dawr(brk);
+ else if (IS_ENABLED(CONFIG_PPC_8xx))
+ set_breakpoint_8xx(brk);
else if (!cpu_has_feature(CPU_FTR_ARCH_207S))
// Power7 or earlier
set_dabr(brk);
pc = regs->nip - (NR_INSN_TO_PRINT * 3 / 4 * sizeof(int));
- /*
- * Make sure the NIP points at userspace, not kernel text/data or
- * elsewhere.
- */
- if (!__access_ok(pc, NR_INSN_TO_PRINT * sizeof(int), USER_DS)) {
- pr_info("%s[%d]: Bad NIP, not dumping instructions.\n",
- current->comm, current->pid);
- return;
- }
-
seq_buf_init(&s, buf, sizeof(buf));
while (n) {
for (i = 0; i < 8 && n; i++, n--, pc += sizeof(int)) {
int instr;
- if (probe_kernel_address((const void *)pc, instr)) {
+ if (probe_user_read(&instr, (void __user *)pc, sizeof(instr))) {
seq_buf_printf(&s, "XXXXXXXX ");
continue;
}
static inline void exc_lvl_early_init(void) { };
#endif
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64) || defined(CONFIG_VMAP_STACK)
void emergency_stack_init(void);
#else
static inline void emergency_stack_init(void) { };
static void *__init alloc_stack(void)
{
- void *ptr = memblock_alloc(THREAD_SIZE, THREAD_SIZE);
+ void *ptr = memblock_alloc(THREAD_SIZE, THREAD_ALIGN);
if (!ptr)
panic("cannot allocate %d bytes for stack at %pS\n",
{
unsigned int i;
+ if (IS_ENABLED(CONFIG_VMAP_STACK))
+ return;
+
/* interrupt stacks must be in lowmem, we get that for free on ppc32
* as the memblock is limited to lowmem by default */
for_each_possible_cpu(i) {
}
}
+#ifdef CONFIG_VMAP_STACK
+void *emergency_ctx[NR_CPUS] __ro_after_init;
+
+void __init emergency_stack_init(void)
+{
+ unsigned int i;
+
+ for_each_possible_cpu(i)
+ emergency_ctx[i] = alloc_stack();
+}
+#endif
+
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
void __init exc_lvl_early_init(void)
{
BUILD_BUG_ON(STACK_INT_FRAME_SIZE % 16);
- ptr = memblock_alloc_try_nid(THREAD_SIZE, THREAD_SIZE,
+ ptr = memblock_alloc_try_nid(THREAD_SIZE, THREAD_ALIGN,
MEMBLOCK_LOW_LIMIT, limit,
early_cpu_to_node(cpu));
if (!ptr)
panic("kernel stack overflow");
}
+void stack_overflow_exception(struct pt_regs *regs)
+{
+ enum ctx_state prev_state = exception_enter();
+
+ die("Kernel stack overflow", regs, SIGSEGV);
+
+ exception_exit(prev_state);
+}
+
void kernel_fp_unavailable_exception(struct pt_regs *regs)
{
enum ctx_state prev_state = exception_enter();
*/
vdso64_pages = (&vdso64_end - &vdso64_start) >> PAGE_SHIFT;
DBG("vdso64_kbase: %p, 0x%x pages\n", vdso64_kbase, vdso64_pages);
-#else
- vdso_data->dcache_block_size = L1_CACHE_BYTES;
- vdso_data->dcache_log_block_size = L1_CACHE_SHIFT;
- vdso_data->icache_block_size = L1_CACHE_BYTES;
- vdso_data->icache_log_block_size = L1_CACHE_SHIFT;
#endif /* CONFIG_PPC64 */
# List of files in the vdso, has to be asm only for now
-obj-vdso32-$(CONFIG_PPC64) = getcpu.o
-obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o \
- $(obj-vdso32-y)
+obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o getcpu.o
# Build rules
#include <asm/processor.h>
#include <asm/ppc_asm.h>
#include <asm/vdso.h>
+#include <asm/vdso_datapage.h>
#include <asm/asm-offsets.h>
+#include <asm/cache.h>
.text
*/
V_FUNCTION_BEGIN(__kernel_sync_dicache)
.cfi_startproc
+#ifdef CONFIG_PPC64
mflr r12
.cfi_register lr,r12
- mr r11,r3
- bl __get_datapage@local
+ get_datapage r10, r0
mtlr r12
- mr r10,r3
+#endif
+#ifdef CONFIG_PPC64
lwz r7,CFG_DCACHE_BLOCKSZ(r10)
addi r5,r7,-1
- andc r6,r11,r5 /* round low to line bdy */
+#else
+ li r5, L1_CACHE_BYTES - 1
+#endif
+ andc r6,r3,r5 /* round low to line bdy */
subf r8,r6,r4 /* compute length */
add r8,r8,r5 /* ensure we get enough */
+#ifdef CONFIG_PPC64
lwz r9,CFG_DCACHE_LOGBLOCKSZ(r10)
srw. r8,r8,r9 /* compute line count */
+#else
+ srwi. r8, r8, L1_CACHE_SHIFT
+ mr r7, r6
+#endif
crclr cr0*4+so
beqlr /* nothing to do? */
mtctr r8
1: dcbst 0,r6
+#ifdef CONFIG_PPC64
add r6,r6,r7
+#else
+ addi r6, r6, L1_CACHE_BYTES
+#endif
bdnz 1b
sync
/* Now invalidate the instruction cache */
+#ifdef CONFIG_PPC64
lwz r7,CFG_ICACHE_BLOCKSZ(r10)
addi r5,r7,-1
- andc r6,r11,r5 /* round low to line bdy */
+ andc r6,r3,r5 /* round low to line bdy */
subf r8,r6,r4 /* compute length */
add r8,r8,r5
lwz r9,CFG_ICACHE_LOGBLOCKSZ(r10)
srw. r8,r8,r9 /* compute line count */
crclr cr0*4+so
beqlr /* nothing to do? */
+#endif
mtctr r8
+#ifdef CONFIG_PPC64
2: icbi 0,r6
add r6,r6,r7
+#else
+2: icbi 0, r7
+ addi r7, r7, L1_CACHE_BYTES
+#endif
bdnz 2b
isync
li r3,0
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
#include <asm/vdso.h>
+#include <asm/vdso_datapage.h>
.text
.global __kernel_datapage_offset;
__kernel_datapage_offset:
.long 0
-V_FUNCTION_BEGIN(__get_datapage)
- .cfi_startproc
- /* We don't want that exposed or overridable as we want other objects
- * to be able to bl directly to here
- */
- .protected __get_datapage
- .hidden __get_datapage
-
- mflr r0
- .cfi_register lr,r0
-
- bcl 20,31,data_page_branch
-data_page_branch:
- mflr r3
- mtlr r0
- addi r3, r3, __kernel_datapage_offset-data_page_branch
- lwz r0,0(r3)
- .cfi_restore lr
- add r3,r0,r3
- blr
- .cfi_endproc
-V_FUNCTION_END(__get_datapage)
-
/*
* void *__kernel_get_syscall_map(unsigned int *syscall_count) ;
*
.cfi_startproc
mflr r12
.cfi_register lr,r12
- mr r4,r3
- bl __get_datapage@local
+ mr. r4,r3
+ get_datapage r3, r0
mtlr r12
addi r3,r3,CFG_SYSCALL_MAP32
- cmpli cr0,r4,0
beqlr
li r0,NR_syscalls
stw r0,0(r4)
.cfi_startproc
mflr r12
.cfi_register lr,r12
- bl __get_datapage@local
+ get_datapage r3, r0
lwz r4,(CFG_TB_TICKS_PER_SEC + 4)(r3)
lwz r3,CFG_TB_TICKS_PER_SEC(r3)
mtlr r12
* int __kernel_getcpu(unsigned *cpu, unsigned *node);
*
*/
+#if defined(CONFIG_PPC64)
V_FUNCTION_BEGIN(__kernel_getcpu)
.cfi_startproc
mfspr r5,SPRN_SPRG_VDSO_READ
rlwinm r7,r5,16,31-15,31-0
beq cr0,1f
stw r6,0(r3)
-1: beq cr1,2f
- stw r7,0(r4)
-2: crclr cr0*4+so
+1: crclr cr0*4+so
li r3,0 /* always success */
+ beqlr cr1
+ stw r7,0(r4)
+ blr
+ .cfi_endproc
+V_FUNCTION_END(__kernel_getcpu)
+#elif !defined(CONFIG_SMP)
+V_FUNCTION_BEGIN(__kernel_getcpu)
+ .cfi_startproc
+ cmpwi cr0, r3, 0
+ cmpwi cr1, r4, 0
+ li r5, 0
+ beq cr0, 1f
+ stw r5, 0(r3)
+1: li r3, 0 /* always success */
+ crclr cr0*4+so
+ beqlr cr1
+ stw r5, 0(r4)
blr
.cfi_endproc
V_FUNCTION_END(__kernel_getcpu)
+#endif
#include <asm/processor.h>
#include <asm/ppc_asm.h>
#include <asm/vdso.h>
+#include <asm/vdso_datapage.h>
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
mflr r12
.cfi_register lr,r12
- mr r10,r3 /* r10 saves tv */
+ mr. r10,r3 /* r10 saves tv */
mr r11,r4 /* r11 saves tz */
- bl __get_datapage@local /* get data page */
- mr r9, r3 /* datapage ptr in r9 */
- cmplwi r10,0 /* check if tv is NULL */
+ get_datapage r9, r0
beq 3f
- lis r7,1000000@ha /* load up USEC_PER_SEC */
- addi r7,r7,1000000@l /* so we get microseconds in r4 */
+ LOAD_REG_IMMEDIATE(r7, 1000000) /* load up USEC_PER_SEC */
bl __do_get_tspec@local /* get sec/usec from tb & kernel */
stw r3,TVAL32_TV_SEC(r10)
stw r4,TVAL32_TV_USEC(r10)
3: cmplwi r11,0 /* check if tz is NULL */
- beq 1f
+ mtlr r12
+ crclr cr0*4+so
+ li r3,0
+ beqlr
+
lwz r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */
lwz r5,CFG_TZ_DSTTIME(r9)
stw r4,TZONE_TZ_MINWEST(r11)
stw r5,TZONE_TZ_DSTTIME(r11)
-1: mtlr r12
- crclr cr0*4+so
- li r3,0
blr
.cfi_endproc
V_FUNCTION_END(__kernel_gettimeofday)
cmpli cr0,r3,CLOCK_REALTIME
cmpli cr1,r3,CLOCK_MONOTONIC
cror cr0*4+eq,cr0*4+eq,cr1*4+eq
- bne cr0,99f
+
+ cmpli cr5,r3,CLOCK_REALTIME_COARSE
+ cmpli cr6,r3,CLOCK_MONOTONIC_COARSE
+ cror cr5*4+eq,cr5*4+eq,cr6*4+eq
+
+ cror cr0*4+eq,cr0*4+eq,cr5*4+eq
+ bne cr0, .Lgettime_fallback
mflr r12 /* r12 saves lr */
.cfi_register lr,r12
mr r11,r4 /* r11 saves tp */
- bl __get_datapage@local /* get data page */
- mr r9,r3 /* datapage ptr in r9 */
- lis r7,NSEC_PER_SEC@h /* want nanoseconds */
- ori r7,r7,NSEC_PER_SEC@l
-50: bl __do_get_tspec@local /* get sec/nsec from tb & kernel */
- bne cr1,80f /* not monotonic -> all done */
+ get_datapage r9, r0
+ LOAD_REG_IMMEDIATE(r7, NSEC_PER_SEC) /* load up NSEC_PER_SEC */
+ beq cr5, .Lcoarse_clocks
+.Lprecise_clocks:
+ bl __do_get_tspec@local /* get sec/nsec from tb & kernel */
+ bne cr1, .Lfinish /* not monotonic -> all done */
/*
* CLOCK_MONOTONIC
add r9,r9,r0
lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
cmpl cr0,r8,r0 /* check if updated */
- bne- 50b
+ bne- .Lprecise_clocks
+ b .Lfinish_monotonic
+
+ /*
+ * For coarse clocks we get data directly from the vdso data page, so
+ * we don't need to call __do_get_tspec, but we still need to do the
+ * counter trick.
+ */
+.Lcoarse_clocks:
+ lwz r8,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
+ andi. r0,r8,1 /* pending update ? loop */
+ bne- .Lcoarse_clocks
+ add r9,r9,r0 /* r0 is already 0 */
+
+ /*
+ * CLOCK_REALTIME_COARSE, below values are needed for MONOTONIC_COARSE
+ * too
+ */
+ lwz r3,STAMP_XTIME_SEC+LOPART(r9)
+ lwz r4,STAMP_XTIME_NSEC+LOPART(r9)
+ bne cr6,1f
+
+ /* CLOCK_MONOTONIC_COARSE */
+ lwz r5,(WTOM_CLOCK_SEC+LOPART)(r9)
+ lwz r6,WTOM_CLOCK_NSEC(r9)
+
+ /* check if counter has updated */
+ or r0,r6,r5
+1: or r0,r0,r3
+ or r0,r0,r4
+ xor r0,r0,r0
+ add r3,r3,r0
+ lwz r0,CFG_TB_UPDATE_COUNT+LOPART(r9)
+ cmpl cr0,r0,r8 /* check if updated */
+ bne- .Lcoarse_clocks
+
+ /* Counter has not updated, so continue calculating proper values for
+ * sec and nsec if monotonic coarse, or just return with the proper
+ * values for realtime.
+ */
+ bne cr6, .Lfinish
/* Calculate and store result. Note that this mimics the C code,
* which may cause funny results if nsec goes negative... is that
* possible at all ?
*/
+.Lfinish_monotonic:
add r3,r3,r5
add r4,r4,r6
cmpw cr0,r4,r7
blt 1f
subf r4,r7,r4
addi r3,r3,1
-1: bge cr1,80f
+1: bge cr1, .Lfinish
addi r3,r3,-1
add r4,r4,r7
-80: stw r3,TSPC32_TV_SEC(r11)
+.Lfinish:
+ stw r3,TSPC32_TV_SEC(r11)
stw r4,TSPC32_TV_NSEC(r11)
mtlr r12
/*
* syscall fallback
*/
-99:
+.Lgettime_fallback:
li r0,__NR_clock_gettime
.cfi_restore lr
sc
V_FUNCTION_BEGIN(__kernel_clock_getres)
.cfi_startproc
/* Check for supported clock IDs */
- cmpwi cr0,r3,CLOCK_REALTIME
- cmpwi cr1,r3,CLOCK_MONOTONIC
- cror cr0*4+eq,cr0*4+eq,cr1*4+eq
- bne cr0,99f
+ cmplwi cr0, r3, CLOCK_MAX
+ cmpwi cr1, r3, CLOCK_REALTIME_COARSE
+ cmpwi cr7, r3, CLOCK_MONOTONIC_COARSE
+ bgt cr0, 99f
+ LOAD_REG_IMMEDIATE(r5, KTIME_LOW_RES)
+ beq cr1, 1f
+ beq cr7, 1f
mflr r12
.cfi_register lr,r12
- bl __get_datapage@local /* get data page */
+ get_datapage r3, r0
lwz r5, CLOCK_HRTIMER_RES(r3)
mtlr r12
- li r3,0
+1: li r3,0
cmpli cr0,r4,0
crclr cr0*4+so
beqlr
blr
/*
- * syscall fallback
+ * invalid clock
*/
99:
- li r0,__NR_clock_getres
- sc
+ li r3, EINVAL
+ crset so
blr
.cfi_endproc
V_FUNCTION_END(__kernel_clock_getres)
.cfi_register lr,r12
mr r11,r3 /* r11 holds t */
- bl __get_datapage@local
- mr r9, r3 /* datapage ptr in r9 */
+ get_datapage r9, r0
lwz r3,STAMP_XTIME_SEC+LOPART(r9)
cmplwi r11,0 /* check if t is NULL */
- beq 2f
- stw r3,0(r11) /* store result at *t */
-2: mtlr r12
+ mtlr r12
crclr cr0*4+so
+ beqlr
+ stw r3,0(r11) /* store result at *t */
blr
.cfi_endproc
V_FUNCTION_END(__kernel_time)
__kernel_sync_dicache_p5;
__kernel_sigtramp32;
__kernel_sigtramp_rt32;
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64) || !defined(CONFIG_SMP)
__kernel_getcpu;
#endif
#ifdef CONFIG_PPC32
mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
oris r9,r9,MSR_VEC@h
+#ifdef CONFIG_VMAP_STACK
+ tovirt(r5, r5)
+#endif
#else
ld r4,PACACURRENT(r13)
addi r5,r4,THREAD /* Get THREAD */
#endif
/* The initial task and kernel stack */
- INIT_TASK_DATA_SECTION(THREAD_SIZE)
+ INIT_TASK_DATA_SECTION(THREAD_ALIGN)
.data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
PAGE_ALIGNED_DATA(PAGE_SIZE)
}
isync();
- pagefault_disable();
if (is_load)
- ret = raw_copy_from_user(to, from, n);
+ ret = probe_user_read(to, (const void __user *)from, n);
else
- ret = raw_copy_to_user(to, from, n);
- pagefault_enable();
+ ret = probe_user_write((void __user *)to, from, n);
/* switch the pid first to avoid running host with unallocated pid */
if (quadrant == 1 && pid != old_pid)
tlbsync
ptesync
+BEGIN_FTR_SECTION
/* Radix: Handle the case where the guest used an illegal PID */
LOAD_REG_ADDR(r4, mmu_base_pid)
lwz r3, VCPU_GUEST_PID(r9)
addi r7,r7,0x1000
bdnz 1b
ptesync
+END_FTR_SECTION_IFSET(CPU_FTR_P9_RADIX_PREFETCH_BUG)
2:
#endif /* CONFIG_PPC_RADIX_MMU */
kvmppc_xive_select_irq(state, &hw_num, &xd);
/*
- * See command in xive_lock_and_mask() concerning masking
+ * See comment in xive_lock_and_mask() concerning masking
* via firmware.
*/
if (xd->flags & OPAL_XIVE_IRQ_MASK_VIA_FW) {
#include <asm/feature-fixups.h>
#include <asm/code-patching-asm.h>
+#ifdef CONFIG_VMAP_STACK
+#define ADDR_OFFSET 0
+#else
+#define ADDR_OFFSET PAGE_OFFSET
+#endif
+
#ifdef CONFIG_SMP
.section .bss
.align 2
.text
_GLOBAL(hash_page)
#ifdef CONFIG_SMP
- lis r8, (mmu_hash_lock - PAGE_OFFSET)@h
- ori r8, r8, (mmu_hash_lock - PAGE_OFFSET)@l
+ lis r8, (mmu_hash_lock - ADDR_OFFSET)@h
+ ori r8, r8, (mmu_hash_lock - ADDR_OFFSET)@l
lis r0,0x0fff
b 10f
11: lwz r6,0(r8)
cmplw 0,r4,r0
ori r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
mfspr r5, SPRN_SPRG_PGDIR /* phys page-table root */
+#ifdef CONFIG_VMAP_STACK
+ tovirt(r5, r5)
+#endif
blt+ 112f /* assume user more likely */
- lis r5, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
- addi r5 ,r5 ,(swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */
+ lis r5, (swapper_pg_dir - ADDR_OFFSET)@ha /* if kernel address, use */
+ addi r5 ,r5 ,(swapper_pg_dir - ADDR_OFFSET)@l /* kernel page table */
rlwimi r3,r9,32-12,29,29 /* MSR_PR -> _PAGE_USER */
112:
#ifndef CONFIG_PTE_64BIT
lwzx r8,r8,r5 /* Get L1 entry */
rlwinm. r8,r8,0,0,20 /* extract pt base address */
#endif
+#ifdef CONFIG_VMAP_STACK
+ tovirt(r8, r8)
+#endif
#ifdef CONFIG_SMP
beq- hash_page_out /* return if no mapping */
#else
#ifdef CONFIG_SMP
eieio
- lis r8, (mmu_hash_lock - PAGE_OFFSET)@ha
+ lis r8, (mmu_hash_lock - ADDR_OFFSET)@ha
li r0,0
- stw r0, (mmu_hash_lock - PAGE_OFFSET)@l(r8)
+ stw r0, (mmu_hash_lock - ADDR_OFFSET)@l(r8)
#endif
/* Return from the exception */
#ifdef CONFIG_SMP
hash_page_out:
eieio
- lis r8, (mmu_hash_lock - PAGE_OFFSET)@ha
+ lis r8, (mmu_hash_lock - ADDR_OFFSET)@ha
li r0,0
- stw r0, (mmu_hash_lock - PAGE_OFFSET)@l(r8)
+ stw r0, (mmu_hash_lock - ADDR_OFFSET)@l(r8)
blr
#endif /* CONFIG_SMP */
patch_site 1f, patch__hash_page_A1
patch_site 2f, patch__hash_page_A2
/* Get the address of the primary PTE group in the hash table (r3) */
-0: lis r0, (Hash_base - PAGE_OFFSET)@h /* base address of hash table */
+0: lis r0, (Hash_base - ADDR_OFFSET)@h /* base address of hash table */
1: rlwimi r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* VSID -> hash */
2: rlwinm r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
xor r3,r3,r0 /* make primary hash */
beq+ 10f /* no PTE: go look for an empty slot */
tlbie r4
- lis r4, (htab_hash_searches - PAGE_OFFSET)@ha
- lwz r6, (htab_hash_searches - PAGE_OFFSET)@l(r4)
+ lis r4, (htab_hash_searches - ADDR_OFFSET)@ha
+ lwz r6, (htab_hash_searches - ADDR_OFFSET)@l(r4)
addi r6,r6,1 /* count how many searches we do */
- stw r6, (htab_hash_searches - PAGE_OFFSET)@l(r4)
+ stw r6, (htab_hash_searches - ADDR_OFFSET)@l(r4)
/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
mtctr r0
beq+ found_empty
/* update counter of times that the primary PTEG is full */
- lis r4, (primary_pteg_full - PAGE_OFFSET)@ha
- lwz r6, (primary_pteg_full - PAGE_OFFSET)@l(r4)
+ lis r4, (primary_pteg_full - ADDR_OFFSET)@ha
+ lwz r6, (primary_pteg_full - ADDR_OFFSET)@l(r4)
addi r6,r6,1
- stw r6, (primary_pteg_full - PAGE_OFFSET)@l(r4)
+ stw r6, (primary_pteg_full - ADDR_OFFSET)@l(r4)
patch_site 0f, patch__hash_page_C
/* Search the secondary PTEG for an empty slot */
* lockup here but that shouldn't happen
*/
-1: lis r4, (next_slot - PAGE_OFFSET)@ha /* get next evict slot */
- lwz r6, (next_slot - PAGE_OFFSET)@l(r4)
+1: lis r4, (next_slot - ADDR_OFFSET)@ha /* get next evict slot */
+ lwz r6, (next_slot - ADDR_OFFSET)@l(r4)
addi r6,r6,HPTE_SIZE /* search for candidate */
andi. r6,r6,7*HPTE_SIZE
stw r6,next_slot@l(r4)
void __init MMU_init_hw_patch(void)
{
unsigned int hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
+ unsigned int hash;
if (ppc_md.progress)
ppc_md.progress("hash:patch", 0x345);
/*
* Patch up the instructions in hashtable.S:create_hpte
*/
- modify_instruction_site(&patch__hash_page_A0, 0xffff,
- ((unsigned int)Hash - PAGE_OFFSET) >> 16);
+ if (IS_ENABLED(CONFIG_VMAP_STACK))
+ hash = (unsigned int)Hash;
+ else
+ hash = (unsigned int)Hash - PAGE_OFFSET;
+
+ modify_instruction_site(&patch__hash_page_A0, 0xffff, hash >> 16);
modify_instruction_site(&patch__hash_page_A1, 0x7c0, hash_mb << 6);
modify_instruction_site(&patch__hash_page_A2, 0x7c0, hash_mb2 << 6);
modify_instruction_site(&patch__hash_page_B, 0xffff, hmask);
static void __init htab_init_page_sizes(void)
{
+ bool aligned = true;
init_hpte_page_sizes();
if (!debug_pagealloc_enabled()) {
* Pick a size for the linear mapping. Currently, we only
* support 16M, 1M and 4K which is the default
*/
- if (mmu_psize_defs[MMU_PAGE_16M].shift)
+ if (IS_ENABLED(STRICT_KERNEL_RWX) &&
+ (unsigned long)_stext % 0x1000000) {
+ if (mmu_psize_defs[MMU_PAGE_16M].shift)
+ pr_warn("Kernel not 16M aligned, "
+ "disabling 16M linear map alignment");
+ aligned = false;
+ }
+
+ if (mmu_psize_defs[MMU_PAGE_16M].shift && aligned)
mmu_linear_psize = MMU_PAGE_16M;
else if (mmu_psize_defs[MMU_PAGE_1M].shift)
mmu_linear_psize = MMU_PAGE_1M;
}
/* Find out how many PID bits are supported */
- if (cpu_has_feature(CPU_FTR_HVMODE)) {
+ if (!cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG)) {
+ if (!mmu_pid_bits)
+ mmu_pid_bits = 20;
+ mmu_base_pid = 1;
+ } else if (cpu_has_feature(CPU_FTR_HVMODE)) {
if (!mmu_pid_bits)
mmu_pid_bits = 20;
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
if (unlikely(pid == MMU_NO_CONTEXT))
return;
+ if (!cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG))
+ return;
+
/*
* If this context hasn't run on that CPU before and KVM is
* around, there's a slim chance that the guest on another
if ((flags & FAULT_FLAG_WRITE) && (flags & FAULT_FLAG_USER) &&
access_ok(nip, sizeof(*nip))) {
unsigned int inst;
- int res;
- pagefault_disable();
- res = __get_user_inatomic(inst, nip);
- pagefault_enable();
- if (!res)
+ if (!probe_user_read(&inst, nip, sizeof(inst)))
return !store_updates_sp(inst);
*must_retry = true;
}
* Userspace trying to access kernel address, we get PROTFAULT for that.
*/
if (is_user && address >= TASK_SIZE) {
+ if ((long)address == -1)
+ return;
+
pr_crit_ratelimited("%s[%d]: User access of kernel address (%lx) - exploit attempt? (uid: %d)\n",
current->comm, current->pid, address,
from_kuid(&init_user_ns, current_uid()));
#include <asm/code-patching.h>
#include <mm/mmu_decl.h>
-static pgprot_t kasan_prot_ro(void)
+static pgprot_t __init kasan_prot_ro(void)
{
if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE))
return PAGE_READONLY;
return PAGE_KERNEL_RO;
}
-static void kasan_populate_pte(pte_t *ptep, pgprot_t prot)
+static void __init kasan_populate_pte(pte_t *ptep, pgprot_t prot)
{
unsigned long va = (unsigned long)kasan_early_shadow_page;
phys_addr_t pa = __pa(kasan_early_shadow_page);
__set_pte_at(&init_mm, va, ptep, pfn_pte(PHYS_PFN(pa), prot), 0);
}
-static int __ref kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end)
+static int __init kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end)
{
pmd_t *pmd;
unsigned long k_cur, k_next;
- pgprot_t prot = slab_is_available() ? kasan_prot_ro() : PAGE_KERNEL;
+ pte_t *new = NULL;
pmd = pmd_offset(pud_offset(pgd_offset_k(k_start), k_start), k_start);
for (k_cur = k_start; k_cur != k_end; k_cur = k_next, pmd++) {
- pte_t *new;
-
k_next = pgd_addr_end(k_cur, k_end);
if ((void *)pmd_page_vaddr(*pmd) != kasan_early_shadow_pte)
continue;
- if (slab_is_available())
- new = pte_alloc_one_kernel(&init_mm);
- else
+ if (!new)
new = memblock_alloc(PTE_FRAG_SIZE, PTE_FRAG_SIZE);
if (!new)
return -ENOMEM;
- kasan_populate_pte(new, prot);
+ kasan_populate_pte(new, PAGE_KERNEL);
smp_wmb(); /* See comment in __pte_alloc */
new = NULL;
}
spin_unlock(&init_mm.page_table_lock);
-
- if (new && slab_is_available())
- pte_free_kernel(&init_mm, new);
}
return 0;
}
-static void __ref *kasan_get_one_page(void)
-{
- if (slab_is_available())
- return (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
-
- return memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-}
-
-static int __ref kasan_init_region(void *start, size_t size)
+static int __init kasan_init_region(void *start, size_t size)
{
unsigned long k_start = (unsigned long)kasan_mem_to_shadow(start);
unsigned long k_end = (unsigned long)kasan_mem_to_shadow(start + size);
unsigned long k_cur;
int ret;
- void *block = NULL;
+ void *block;
ret = kasan_init_shadow_page_tables(k_start, k_end);
if (ret)
return ret;
- if (!slab_is_available())
- block = memblock_alloc(k_end - k_start, PAGE_SIZE);
+ block = memblock_alloc(k_end - k_start, PAGE_SIZE);
for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(k_cur), k_cur), k_cur);
- void *va = block ? block + k_cur - k_start : kasan_get_one_page();
+ void *va = block + k_cur - k_start;
pte_t pte = pfn_pte(PHYS_PFN(__pa(va)), PAGE_KERNEL);
if (!va)
flush_tlb_kernel_range(KASAN_SHADOW_START, KASAN_SHADOW_END);
}
+static void __init kasan_unmap_early_shadow_vmalloc(void)
+{
+ unsigned long k_start = (unsigned long)kasan_mem_to_shadow((void *)VMALLOC_START);
+ unsigned long k_end = (unsigned long)kasan_mem_to_shadow((void *)VMALLOC_END);
+ unsigned long k_cur;
+ phys_addr_t pa = __pa(kasan_early_shadow_page);
+
+ if (!early_mmu_has_feature(MMU_FTR_HPTE_TABLE)) {
+ int ret = kasan_init_shadow_page_tables(k_start, k_end);
+
+ if (ret)
+ panic("kasan: kasan_init_shadow_page_tables() failed");
+ }
+ for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
+ pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(k_cur), k_cur), k_cur);
+ pte_t *ptep = pte_offset_kernel(pmd, k_cur);
+
+ if ((pte_val(*ptep) & PTE_RPN_MASK) != pa)
+ continue;
+
+ __set_pte_at(&init_mm, k_cur, ptep, __pte(0), 0);
+ }
+ flush_tlb_kernel_range(k_start, k_end);
+}
+
void __init kasan_mmu_init(void)
{
int ret;
pr_info("KASAN init done\n");
}
-#ifdef CONFIG_MODULES
-void *module_alloc(unsigned long size)
+void __init kasan_late_init(void)
{
- void *base;
-
- base = __vmalloc_node_range(size, MODULE_ALIGN, VMALLOC_START, VMALLOC_END,
- GFP_KERNEL, PAGE_KERNEL_EXEC, VM_FLUSH_RESET_PERMS,
- NUMA_NO_NODE, __builtin_return_address(0));
-
- if (!base)
- return NULL;
-
- if (!kasan_init_region(base, size))
- return base;
-
- vfree(base);
-
- return NULL;
+ if (IS_ENABLED(CONFIG_KASAN_VMALLOC))
+ kasan_unmap_early_shadow_vmalloc();
}
-#endif
#ifdef CONFIG_PPC_BOOK3S_32
u8 __initdata early_hash[256 << 10] __aligned(256 << 10) = {0};
static void __init kasan_early_hash_table(void)
{
- modify_instruction_site(&patch__hash_page_A0, 0xffff, __pa(early_hash) >> 16);
- modify_instruction_site(&patch__flush_hash_A0, 0xffff, __pa(early_hash) >> 16);
+ unsigned int hash = IS_ENABLED(CONFIG_VMAP_STACK) ? (unsigned int)early_hash :
+ __pa(early_hash);
+
+ modify_instruction_site(&patch__hash_page_A0, 0xffff, hash >> 16);
+ modify_instruction_site(&patch__flush_hash_A0, 0xffff, hash >> 16);
Hash = (struct hash_pte *)early_hash;
}
#include <asm/fixmap.h>
#include <asm/swiotlb.h>
#include <asm/rtas.h>
+#include <asm/kasan.h>
#include <mm/mmu_decl.h>
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
set_max_mapnr(max_pfn);
+
+ kasan_late_init();
+
memblock_free_all();
#ifdef CONFIG_HIGHMEM
static inline void mmu_mark_initmem_nx(void) { }
static inline void mmu_mark_rodata_ro(void) { }
#endif
+
+#ifdef CONFIG_PPC_DEBUG_WX
+void ptdump_check_wx(void);
+#else
+static inline void ptdump_check_wx(void) { }
+#endif
static unsigned long block_mapped_ram;
/*
- * Return PA for this VA if it is in an area mapped with LTLBs.
+ * Return PA for this VA if it is in an area mapped with LTLBs or fixmap.
* Otherwise, returns 0
*/
phys_addr_t v_block_mapped(unsigned long va)
{
unsigned long p = PHYS_IMMR_BASE;
- if (__map_without_ltlbs)
- return 0;
if (va >= VIRT_IMMR_BASE && va < VIRT_IMMR_BASE + IMMR_SIZE)
return p + va - VIRT_IMMR_BASE;
+ if (__map_without_ltlbs)
+ return 0;
if (va >= PAGE_OFFSET && va < PAGE_OFFSET + block_mapped_ram)
return __pa(va);
return 0;
}
/*
- * Return VA for a given PA mapped with LTLBs or 0 if not mapped
+ * Return VA for a given PA mapped with LTLBs or fixmap
+ * Return 0 if not mapped
*/
unsigned long p_block_mapped(phys_addr_t pa)
{
unsigned long p = PHYS_IMMR_BASE;
- if (__map_without_ltlbs)
- return 0;
if (pa >= p && pa < p + IMMR_SIZE)
return VIRT_IMMR_BASE + pa - p;
+ if (__map_without_ltlbs)
+ return 0;
if (pa < block_mapped_ram)
return (unsigned long)__va(pa);
return 0;
if (v_block_mapped((unsigned long)_sinittext)) {
mmu_mark_rodata_ro();
+ ptdump_check_wx();
return;
}
#include <asm/page.h>
#include <asm/pgalloc.h>
+#include <mm/mmu_decl.h>
+
#include "ptdump.h"
/*
static void note_prot_wx(struct pg_state *st, unsigned long addr)
{
+ pte_t pte = __pte(st->current_flags);
+
if (!IS_ENABLED(CONFIG_PPC_DEBUG_WX) || !st->check_wx)
return;
- if (!((st->current_flags & pgprot_val(PAGE_KERNEL_X)) == pgprot_val(PAGE_KERNEL_X)))
+ if (!pte_write(pte) || !pte_exec(pte))
return;
WARN_ONCE(1, "powerpc/mm: Found insecure W+X mapping at address %p/%pS\n",
unsigned int stack_frame[2];
void __user *p = compat_ptr(sp);
- if (!access_ok(p, sizeof(stack_frame)))
- return 0;
-
/*
* The most likely reason for this is that we returned -EFAULT,
* which means that we've done all that we can do from
* interrupt context.
*/
- if (__copy_from_user_inatomic(stack_frame, p, sizeof(stack_frame)))
+ if (probe_user_read(stack_frame, (void __user *)p, sizeof(stack_frame)))
return 0;
if (!is_first)
{
unsigned long stack_frame[3];
- if (!access_ok((void __user *)sp, sizeof(stack_frame)))
- return 0;
-
- if (__copy_from_user_inatomic(stack_frame, (void __user *)sp,
- sizeof(stack_frame)))
+ if (probe_user_read(stack_frame, (void __user *)sp, sizeof(stack_frame)))
return 0;
if (!is_first)
first_frame = 0;
}
} else {
- pagefault_disable();
#ifdef CONFIG_PPC64
if (!is_32bit_task()) {
while (depth--) {
break;
first_frame = 0;
}
- pagefault_enable();
return;
}
#endif
break;
first_frame = 0;
}
- pagefault_enable();
}
}
static void mpc8xx_pmu_del(struct perf_event *event, int flags)
{
- /* mfspr r10, SPRN_SPRG_SCRATCH0 */
- unsigned int insn = PPC_INST_MFSPR | __PPC_RS(R10) |
- __PPC_SPR(SPRN_SPRG_SCRATCH0);
-
mpc8xx_pmu_read(event);
/* If it was the last user, stop counting to avoid useles overhead */
break;
case PERF_8xx_ID_ITLB_LOAD_MISS:
if (atomic_dec_return(&itlb_miss_ref) == 0) {
+ /* mfspr r10, SPRN_SPRG_SCRATCH0 */
+ unsigned int insn = PPC_INST_MFSPR | __PPC_RS(R10) |
+ __PPC_SPR(SPRN_SPRG_SCRATCH0);
+
patch_instruction_site(&patch__itlbmiss_exit_1, insn);
#ifndef CONFIG_PIN_TLB_TEXT
patch_instruction_site(&patch__itlbmiss_exit_2, insn);
break;
case PERF_8xx_ID_DTLB_LOAD_MISS:
if (atomic_dec_return(&dtlb_miss_ref) == 0) {
+ /* mfspr r10, SPRN_DAR */
+ unsigned int insn = PPC_INST_MFSPR | __PPC_RS(R10) |
+ __PPC_SPR(SPRN_DAR);
+
patch_instruction_site(&patch__dtlbmiss_exit_1, insn);
patch_instruction_site(&patch__dtlbmiss_exit_2, insn);
patch_instruction_site(&patch__dtlbmiss_exit_3, insn);
((unsigned long)ptr & 7))
return -EFAULT;
- pagefault_disable();
- if (!__get_user_inatomic(*ret, ptr)) {
- pagefault_enable();
+ if (!probe_user_read(ret, ptr, sizeof(*ret)))
return 0;
- }
- pagefault_enable();
return read_user_stack_slow(ptr, ret, 8);
}
((unsigned long)ptr & 3))
return -EFAULT;
- pagefault_disable();
- if (!__get_user_inatomic(*ret, ptr)) {
- pagefault_enable();
+ if (!probe_user_read(ret, ptr, sizeof(*ret)))
return 0;
- }
- pagefault_enable();
return read_user_stack_slow(ptr, ret, 4);
}
*/
static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
{
- int rc;
-
if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
((unsigned long)ptr & 3))
return -EFAULT;
- pagefault_disable();
- rc = __get_user_inatomic(*ret, ptr);
- pagefault_enable();
-
- return rc;
+ return probe_user_read(ret, ptr, sizeof(*ret));
}
static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,
static __u64 power_pmu_bhrb_to(u64 addr)
{
unsigned int instr;
- int ret;
__u64 target;
if (is_kernel_addr(addr)) {
}
/* Userspace: need copy instruction here then translate it */
- pagefault_disable();
- ret = __get_user_inatomic(instr, (unsigned int __user *)addr);
- if (ret) {
- pagefault_enable();
+ if (probe_user_read(&instr, (unsigned int __user *)addr, sizeof(instr)))
return 0;
- }
- pagefault_enable();
target = branch_target(&instr);
if ((!target) || (instr & BRANCH_ABSOLUTE))
memset(&lpbfifo, 0, sizeof(struct lpbfifo_data));
spin_lock_init(&lpbfifo.lock);
- lpbfifo.chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
- if (lpbfifo.chan == NULL)
- return -EPROBE_DEFER;
+ lpbfifo.chan = dma_request_chan(&pdev->dev, "rx-tx");
+ if (IS_ERR(lpbfifo.chan))
+ return PTR_ERR(lpbfifo.chan);
if (of_address_to_resource(pdev->dev.of_node, 0, &r) != 0) {
dev_err(&pdev->dev, "bad 'reg' in 'sclpc' device tree node\n");
return;
}
- base = ioremap(res.start, res.end - res.start + 1);
+ base = ioremap(res.start, resource_size(&res));
/*
* set output delay adjustments to default values according
out_be64((u64 *)(&spin_table->addr_h),
__pa(ppc_function_entry(generic_secondary_smp_init)));
#else
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+ /*
+ * We need also to write addr_h to spin table for systems
+ * in which their physical memory start address was configured
+ * to above 4G, otherwise the secondary core can not get
+ * correct entry to start from.
+ */
+ out_be32(&spin_table->addr_h, __pa(__early_start) >> 32);
+#endif
out_be32(&spin_table->addr_l, __pa(__early_start));
#endif
flush_spin_table(spin_table);
*/
static void __init twr_p1025_setup_arch(void)
{
-#ifdef CONFIG_QUICC_ENGINE
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("twr_p1025_setup_arch()", 0);
#if IS_ENABLED(CONFIG_UCC_GETH) || IS_ENABLED(CONFIG_SERIAL_QE)
if (machine_is(twr_p1025)) {
struct ccsr_guts __iomem *guts;
+ struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts");
if (np) {
config PPC_P7_NAP
bool
+config PPC_BOOK3S_IDLE
+ def_bool y
+ depends on (PPC_970_NAP || PPC_P7_NAP)
+
config PPC_INDIRECT_PIO
bool
select GENERIC_IOMAP
# SPDX-License-Identifier: GPL-2.0
+config PPC32
+ bool
+ default y if !PPC64
+ select KASAN_VMALLOC if KASAN && MODULES
+
config PPC64
bool "64-bit kernel"
select ZLIB_DEFLATE
select PPC_HAVE_PMU_SUPPORT
select PPC_HAVE_KUEP
select PPC_HAVE_KUAP
+ select HAVE_ARCH_VMAP_STACK
config PPC_BOOK3S_601
bool "PowerPC 601"
select PPC_BOOK3S_32
select PPC_FPU
select PPC_HAVE_KUAP
+ select HAVE_ARCH_VMAP_STACK
config PPC_85xx
bool "Freescale 85xx"
select PPC_HAVE_KUEP
select PPC_HAVE_KUAP
select PPC_MM_SLICES if HUGETLB_PAGE
+ select HAVE_ARCH_VMAP_STACK
config 40x
bool "AMCC 40x"
root = of_find_node_by_path("/");
naddr = of_n_addr_cells(root);
opprop = of_get_property(root, "platform-open-pic", &opplen);
- if (opprop != 0) {
+ if (opprop) {
openpic_addr = of_read_number(opprop, naddr);
has_isus = (opplen > naddr);
printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
return 0;
}
-static ssize_t symbol_map_read(struct file *fp, struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buf, loff_t off, size_t count)
+static ssize_t export_attr_read(struct file *fp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t off, size_t count)
{
return memory_read_from_buffer(buf, count, &off, bin_attr->private,
bin_attr->size);
}
-static struct bin_attribute symbol_map_attr = {
- .attr = {.name = "symbol_map", .mode = 0400},
- .read = symbol_map_read
-};
-
-static void opal_export_symmap(void)
+static int opal_add_one_export(struct kobject *parent, const char *export_name,
+ struct device_node *np, const char *prop_name)
{
- const __be64 *syms;
- unsigned int size;
- struct device_node *fw;
+ struct bin_attribute *attr = NULL;
+ const char *name = NULL;
+ u64 vals[2];
int rc;
- fw = of_find_node_by_path("/ibm,opal/firmware");
- if (!fw)
- return;
- syms = of_get_property(fw, "symbol-map", &size);
- if (!syms || size != 2 * sizeof(__be64))
- return;
+ rc = of_property_read_u64_array(np, prop_name, &vals[0], 2);
+ if (rc)
+ goto out;
- /* Setup attributes */
- symbol_map_attr.private = __va(be64_to_cpu(syms[0]));
- symbol_map_attr.size = be64_to_cpu(syms[1]);
+ attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+ name = kstrdup(export_name, GFP_KERNEL);
+ if (!name) {
+ rc = -ENOMEM;
+ goto out;
+ }
- rc = sysfs_create_bin_file(opal_kobj, &symbol_map_attr);
- if (rc)
- pr_warn("Error %d creating OPAL symbols file\n", rc);
+ sysfs_bin_attr_init(attr);
+ attr->attr.name = name;
+ attr->attr.mode = 0400;
+ attr->read = export_attr_read;
+ attr->private = __va(vals[0]);
+ attr->size = vals[1];
+
+ rc = sysfs_create_bin_file(parent, attr);
+out:
+ if (rc) {
+ kfree(name);
+ kfree(attr);
+ }
+
+ return rc;
}
-static ssize_t export_attr_read(struct file *fp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf,
- loff_t off, size_t count)
+static void opal_add_exported_attrs(struct device_node *np,
+ struct kobject *kobj)
{
- return memory_read_from_buffer(buf, count, &off, bin_attr->private,
- bin_attr->size);
+ struct device_node *child;
+ struct property *prop;
+
+ for_each_property_of_node(np, prop) {
+ int rc;
+
+ if (!strcmp(prop->name, "name") ||
+ !strcmp(prop->name, "phandle"))
+ continue;
+
+ rc = opal_add_one_export(kobj, prop->name, np, prop->name);
+ if (rc) {
+ pr_warn("Unable to add export %pOF/%s, rc = %d!\n",
+ np, prop->name, rc);
+ }
+ }
+
+ for_each_child_of_node(np, child) {
+ struct kobject *child_kobj;
+
+ child_kobj = kobject_create_and_add(child->name, kobj);
+ if (!child_kobj) {
+ pr_err("Unable to create export dir for %pOF\n", child);
+ continue;
+ }
+
+ opal_add_exported_attrs(child, child_kobj);
+ }
}
/*
*/
static void opal_export_attrs(void)
{
- struct bin_attribute *attr;
struct device_node *np;
- struct property *prop;
struct kobject *kobj;
- u64 vals[2];
int rc;
np = of_find_node_by_path("/ibm,opal/firmware/exports");
return;
}
- for_each_property_of_node(np, prop) {
- if (!strcmp(prop->name, "name") || !strcmp(prop->name, "phandle"))
- continue;
-
- if (of_property_read_u64_array(np, prop->name, &vals[0], 2))
- continue;
-
- attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+ opal_add_exported_attrs(np, kobj);
- if (attr == NULL) {
- pr_warn("Failed kmalloc for bin_attribute!");
- continue;
- }
-
- sysfs_bin_attr_init(attr);
- attr->attr.name = kstrdup(prop->name, GFP_KERNEL);
- attr->attr.mode = 0400;
- attr->read = export_attr_read;
- attr->private = __va(vals[0]);
- attr->size = vals[1];
-
- if (attr->attr.name == NULL) {
- pr_warn("Failed kstrdup for bin_attribute attr.name");
- kfree(attr);
- continue;
- }
-
- rc = sysfs_create_bin_file(kobj, attr);
- if (rc) {
- pr_warn("Error %d creating OPAL sysfs exports/%s file\n",
- rc, prop->name);
- kfree(attr->attr.name);
- kfree(attr);
- }
- }
+ /*
+ * NB: symbol_map existed before the generic export interface so it
+ * lives under the top level opal_kobj.
+ */
+ rc = opal_add_one_export(opal_kobj, "symbol_map",
+ np->parent, "symbol-map");
+ if (rc)
+ pr_warn("Error %d creating OPAL symbols file\n", rc);
of_node_put(np);
}
/* Create "opal" kobject under /sys/firmware */
rc = opal_sysfs_init();
if (rc == 0) {
- /* Export symbol map to userspace */
- opal_export_symmap();
/* Setup dump region interface */
opal_dump_region_init();
/* Setup error log interface */
opal_sys_param_init();
/* Setup message log sysfs interface. */
opal_msglog_sysfs_init();
+ /* Add all export properties*/
+ opal_export_attrs();
}
- /* Export all properties */
- opal_export_attrs();
-
/* Initialize platform devices: IPMI backend, PRD & flash interface */
opal_pdev_init("ibm,opal-ipmi");
opal_pdev_init("ibm,opal-flash");
unsigned int pe_num = pe->pe_number;
WARN_ON(pe->pdev);
- WARN_ON(pe->npucomp); /* NPUs are not supposed to be freed */
+ WARN_ON(pe->npucomp); /* NPUs for nvlink are not supposed to be freed */
kfree(pe->npucomp);
memset(pe, 0, sizeof(struct pnv_ioda_pe));
clear_bit(pe_num, phb->ioda.pe_alloc);
return 0;
}
+static void pnv_ioda_unset_peltv(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe,
+ struct pci_dev *parent)
+{
+ int64_t rc;
+
+ while (parent) {
+ struct pci_dn *pdn = pci_get_pdn(parent);
+
+ if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+ rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+ pe->pe_number,
+ OPAL_REMOVE_PE_FROM_DOMAIN);
+ /* XXX What to do in case of error ? */
+ }
+ parent = parent->bus->self;
+ }
+
+ opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+ /* Disassociate PE in PELT */
+ rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
+ pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+ if (rc)
+ pe_warn(pe, "OPAL error %lld remove self from PELTV\n", rc);
+}
+
static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
{
struct pci_dev *parent;
fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
parent = pe->pbus->self;
if (pe->flags & PNV_IODA_PE_BUS_ALL)
- count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+ count = resource_size(&pe->pbus->busn_res);
else
count = 1;
for (rid = pe->rid; rid < rid_end; rid++)
phb->ioda.pe_rmap[rid] = IODA_INVALID_PE;
- /* Release from all parents PELT-V */
- while (parent) {
- struct pci_dn *pdn = pci_get_pdn(parent);
- if (pdn && pdn->pe_number != IODA_INVALID_PE) {
- rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
- pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
- /* XXX What to do in case of error ? */
- }
- parent = parent->bus->self;
- }
-
- opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
- OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+ /*
+ * Release from all parents PELT-V. NPUs don't have a PELTV
+ * table
+ */
+ if (phb->type != PNV_PHB_NPU_NVLINK && phb->type != PNV_PHB_NPU_OCAPI)
+ pnv_ioda_unset_peltv(phb, pe, parent);
- /* Disassociate PE in PELT */
- rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
- pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
- if (rc)
- pe_warn(pe, "OPAL error %lld remove self from PELTV\n", rc);
rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
bcomp, dcomp, fcomp, OPAL_UNMAP_PE);
if (rc)
fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
parent = pe->pbus->self;
if (pe->flags & PNV_IODA_PE_BUS_ALL)
- count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+ count = resource_size(&pe->pbus->busn_res);
else
count = 1;
return NULL;
}
- /* NOTE: We get only one ref to the pci_dev for the pdn, not for the
- * pointer in the PE data structure, both should be destroyed at the
- * same time. However, this needs to be looked at more closely again
- * once we actually start removing things (Hotplug, SR-IOV, ...)
+ /* NOTE: We don't get a reference for the pointer in the PE
+ * data structure, both the device and PE structures should be
+ * destroyed at the same time. However, removing nvlink
+ * devices will need some work.
*
* At some point we want to remove the PDN completely anyways
*/
- pci_dev_get(dev);
pdn->pe_number = pe->pe_number;
pe->flags = PNV_IODA_PE_DEV;
pe->pdev = dev;
pe->pbus = NULL;
pe->mve_number = -1;
pe->rid = dev->bus->number << 8 | pdn->devfn;
+ pe->device_count++;
pe_info(pe, "Associated device to PE\n");
pnv_ioda_free_pe(pe);
pdn->pe_number = IODA_INVALID_PE;
pe->pdev = NULL;
- pci_dev_put(dev);
return NULL;
}
/* Put PE to the list */
+ mutex_lock(&phb->ioda.pe_list_mutex);
list_add_tail(&pe->list, &phb->ioda.pe_list);
-
+ mutex_unlock(&phb->ioda.pe_list_mutex);
return pe;
}
struct pci_controller *hose = pci_bus_to_host(npu_pdev->bus);
struct pnv_phb *phb = hose->private_data;
+ /*
+ * Intentionally leak a reference on the npu device (for
+ * nvlink only; this is not an opencapi path) to make sure it
+ * never goes away, as it's been the case all along and some
+ * work is needed otherwise.
+ */
+ pci_dev_get(npu_pdev);
+
/*
* Due to a hardware errata PE#0 on the NPU is reserved for
* error handling. This means we only have three PEs remaining
*/
dev_info(&npu_pdev->dev,
"Associating to existing PE %x\n", pe_num);
- pci_dev_get(npu_pdev);
npu_pdn = pci_get_pdn(npu_pdev);
rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
npu_pdn->pe_number = pe_num;
phb->ioda.pe_rmap[rid] = pe->pe_number;
+ pe->device_count++;
/* Map the PE to this link */
rc = opal_pci_set_pe(phb->opal_id, pe_num, rid,
{
struct pci_controller *hose;
struct pnv_phb *phb;
- struct pci_bus *bus;
- struct pci_dev *pdev;
struct pnv_ioda_pe *pe;
list_for_each_entry(hose, &hose_list, list_node) {
if (phb->model == PNV_PHB_MODEL_NPU2)
WARN_ON_ONCE(pnv_npu2_init(hose));
}
- if (phb->type == PNV_PHB_NPU_OCAPI) {
- bus = hose->bus;
- list_for_each_entry(pdev, &bus->devices, bus_list)
- pnv_ioda_setup_dev_PE(pdev);
- }
}
list_for_each_entry(hose, &hose_list, list_node) {
phb = hose->private_data;
/* Reserve PE for each VF */
for (vf_index = 0; vf_index < num_vfs; vf_index++) {
+ int vf_devfn = pci_iov_virtfn_devfn(pdev, vf_index);
+ int vf_bus = pci_iov_virtfn_bus(pdev, vf_index);
+ struct pci_dn *vf_pdn;
+
if (pdn->m64_single_mode)
pe_num = pdn->pe_num_map[vf_index];
else
pe->pbus = NULL;
pe->parent_dev = pdev;
pe->mve_number = -1;
- pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) |
- pci_iov_virtfn_devfn(pdev, vf_index);
+ pe->rid = (vf_bus << 8) | vf_devfn;
pe_info(pe, "VF %04d:%02d:%02d.%d associated with PE#%x\n",
hose->global_number, pdev->bus->number,
- PCI_SLOT(pci_iov_virtfn_devfn(pdev, vf_index)),
- PCI_FUNC(pci_iov_virtfn_devfn(pdev, vf_index)), pe_num);
+ PCI_SLOT(vf_devfn), PCI_FUNC(vf_devfn), pe_num);
if (pnv_ioda_configure_pe(phb, pe)) {
/* XXX What do we do here ? */
list_add_tail(&pe->list, &phb->ioda.pe_list);
mutex_unlock(&phb->ioda.pe_list_mutex);
+ /* associate this pe to it's pdn */
+ list_for_each_entry(vf_pdn, &pdn->parent->child_list, list) {
+ if (vf_pdn->busno == vf_bus &&
+ vf_pdn->devfn == vf_devfn) {
+ vf_pdn->pe_number = pe_num;
+ break;
+ }
+ }
+
pnv_pci_ioda2_setup_dma_pe(phb, pe);
#ifdef CONFIG_IOMMU_API
iommu_register_group(&pe->table_group,
pnv_pci_sriov_disable(pdev);
/* Release PCI data */
- remove_dev_pci_data(pdev);
+ remove_sriov_vf_pdns(pdev);
return 0;
}
int pnv_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
{
/* Allocate PCI data */
- add_dev_pci_data(pdev);
+ add_sriov_vf_pdns(pdev);
return pnv_pci_sriov_enable(pdev, num_vfs);
}
#endif /* CONFIG_PCI_IOV */
-static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev)
+static void pnv_pci_ioda_dma_dev_setup(struct pci_dev *pdev)
{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct pnv_phb *phb = hose->private_data;
struct pci_dn *pdn = pci_get_pdn(pdev);
struct pnv_ioda_pe *pe;
struct pci_dn *pdn;
int mul, total_vfs;
- if (!pdev->is_physfn || pci_dev_is_added(pdev))
- return;
-
pdn = pci_get_pdn(pdev);
pdn->vfs_expanded = 0;
pdn->m64_single_mode = false;
res->end = res->start - 1;
}
}
+
+static void pnv_pci_ioda_fixup_iov(struct pci_dev *pdev)
+{
+ if (WARN_ON(pci_dev_is_added(pdev)))
+ return;
+
+ if (pdev->is_virtfn) {
+ struct pnv_ioda_pe *pe = pnv_ioda_get_pe(pdev);
+
+ /*
+ * VF PEs are single-device PEs so their pdev pointer needs to
+ * be set. The pdev doesn't exist when the PE is allocated (in
+ * (pcibios_sriov_enable()) so we fix it up here.
+ */
+ pe->pdev = pdev;
+ WARN_ON(!(pe->flags & PNV_IODA_PE_VF));
+ } else if (pdev->is_physfn) {
+ /*
+ * For PFs adjust their allocated IOV resources to match what
+ * the PHB can support using it's M64 BAR table.
+ */
+ pnv_pci_ioda_fixup_iov_resources(pdev);
+ }
+}
#endif /* CONFIG_PCI_IOV */
static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe,
#ifdef CONFIG_DEBUG_FS
static int pnv_pci_diag_data_set(void *data, u64 val)
{
- struct pci_controller *hose;
- struct pnv_phb *phb;
+ struct pnv_phb *phb = data;
s64 ret;
- if (val != 1ULL)
- return -EINVAL;
-
- hose = (struct pci_controller *)data;
- if (!hose || !hose->private_data)
- return -ENODEV;
-
- phb = hose->private_data;
-
/* Retrieve the diag data from firmware */
ret = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag_data,
phb->diag_data_size);
DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_diag_data_fops, NULL, pnv_pci_diag_data_set,
"%llu\n");
+static int pnv_pci_ioda_pe_dump(void *data, u64 val)
+{
+ struct pnv_phb *phb = data;
+ int pe_num;
+
+ for (pe_num = 0; pe_num < phb->ioda.total_pe_num; pe_num++) {
+ struct pnv_ioda_pe *pe = &phb->ioda.pe_array[pe_num];
+
+ if (!test_bit(pe_num, phb->ioda.pe_alloc))
+ continue;
+
+ pe_warn(pe, "rid: %04x dev count: %2d flags: %s%s%s%s%s%s\n",
+ pe->rid, pe->device_count,
+ (pe->flags & PNV_IODA_PE_DEV) ? "dev " : "",
+ (pe->flags & PNV_IODA_PE_BUS) ? "bus " : "",
+ (pe->flags & PNV_IODA_PE_BUS_ALL) ? "all " : "",
+ (pe->flags & PNV_IODA_PE_MASTER) ? "master " : "",
+ (pe->flags & PNV_IODA_PE_SLAVE) ? "slave " : "",
+ (pe->flags & PNV_IODA_PE_VF) ? "vf " : "");
+ }
+
+ return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_ioda_pe_dump_fops, NULL,
+ pnv_pci_ioda_pe_dump, "%llu\n");
+
#endif /* CONFIG_DEBUG_FS */
static void pnv_pci_ioda_create_dbgfs(void)
}
debugfs_create_file_unsafe("dump_diag_regs", 0200, phb->dbgfs,
- hose, &pnv_pci_diag_data_fops);
+ phb, &pnv_pci_diag_data_fops);
+ debugfs_create_file_unsafe("dump_ioda_pe_state", 0200, phb->dbgfs,
+ phb, &pnv_pci_ioda_pe_dump_fops);
}
#endif /* CONFIG_DEBUG_FS */
}
return true;
}
+static bool pnv_ocapi_enable_device_hook(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pci_dn *pdn;
+ struct pnv_ioda_pe *pe;
+
+ if (!phb->initialized)
+ return true;
+
+ pdn = pci_get_pdn(dev);
+ if (!pdn)
+ return false;
+
+ if (pdn->pe_number == IODA_INVALID_PE) {
+ pe = pnv_ioda_setup_dev_PE(dev);
+ if (!pe)
+ return false;
+ }
+ return true;
+}
+
static long pnv_pci_ioda1_unset_window(struct iommu_table_group *table_group,
int num)
{
struct pnv_phb *phb = pe->phb;
struct pnv_ioda_pe *slave, *tmp;
+ mutex_lock(&phb->ioda.pe_list_mutex);
list_del(&pe->list);
+ mutex_unlock(&phb->ioda.pe_list_mutex);
+
switch (phb->type) {
case PNV_PHB_IODA1:
pnv_pci_ioda1_release_pe_dma(pe);
case PNV_PHB_IODA2:
pnv_pci_ioda2_release_pe_dma(pe);
break;
+ case PNV_PHB_NPU_OCAPI:
+ break;
default:
WARN_ON(1);
}
OPAL_ASSERT_RESET);
}
+static void pnv_pci_ioda_dma_bus_setup(struct pci_bus *bus)
+{
+ struct pci_controller *hose = bus->sysdata;
+ struct pnv_phb *phb = hose->private_data;
+ struct pnv_ioda_pe *pe;
+
+ list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+ if (!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)))
+ continue;
+
+ if (!pe->pbus)
+ continue;
+
+ if (bus->number == ((pe->rid >> 8) & 0xFF)) {
+ pe->pbus = bus;
+ break;
+ }
+ }
+}
+
static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
- .dma_dev_setup = pnv_pci_dma_dev_setup,
- .dma_bus_setup = pnv_pci_dma_bus_setup,
+ .dma_dev_setup = pnv_pci_ioda_dma_dev_setup,
+ .dma_bus_setup = pnv_pci_ioda_dma_bus_setup,
.iommu_bypass_supported = pnv_pci_ioda_iommu_bypass_supported,
.setup_msi_irqs = pnv_setup_msi_irqs,
.teardown_msi_irqs = pnv_teardown_msi_irqs,
};
static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
- .dma_dev_setup = pnv_pci_dma_dev_setup,
.setup_msi_irqs = pnv_setup_msi_irqs,
.teardown_msi_irqs = pnv_teardown_msi_irqs,
.enable_device_hook = pnv_pci_enable_device_hook,
};
static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
- .enable_device_hook = pnv_pci_enable_device_hook,
+ .enable_device_hook = pnv_ocapi_enable_device_hook,
+ .release_device = pnv_pci_release_device,
.window_alignment = pnv_pci_window_alignment,
.reset_secondary_bus = pnv_pci_reset_secondary_bus,
.shutdown = pnv_pci_ioda_shutdown,
hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops;
break;
default:
- phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
hose->controller_ops = pnv_pci_ioda_controller_ops;
}
ppc_md.pcibios_default_alignment = pnv_pci_default_alignment;
#ifdef CONFIG_PCI_IOV
- ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;
+ ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov;
ppc_md.pcibios_iov_resource_alignment = pnv_pci_iov_resource_alignment;
ppc_md.pcibios_sriov_enable = pnv_pcibios_sriov_enable;
ppc_md.pcibios_sriov_disable = pnv_pcibios_sriov_disable;
int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id)
{
- struct device_node *parent = np;
+ struct device_node *node = np;
u32 bdfn;
u64 phbid;
int ret;
return -ENXIO;
bdfn = ((bdfn & 0x00ffff00) >> 8);
- while ((parent = of_get_parent(parent))) {
- if (!PCI_DN(parent)) {
- of_node_put(parent);
+ for (node = np; node; node = of_get_parent(node)) {
+ if (!PCI_DN(node)) {
+ of_node_put(node);
break;
}
- if (!of_device_is_compatible(parent, "ibm,ioda2-phb") &&
- !of_device_is_compatible(parent, "ibm,ioda3-phb")) {
- of_node_put(parent);
+ if (!of_device_is_compatible(node, "ibm,ioda2-phb") &&
+ !of_device_is_compatible(node, "ibm,ioda3-phb") &&
+ !of_device_is_compatible(node, "ibm,ioda2-npu2-opencapi-phb")) {
+ of_node_put(node);
continue;
}
- ret = of_property_read_u64(parent, "ibm,opal-phbid", &phbid);
+ ret = of_property_read_u64(node, "ibm,opal-phbid", &phbid);
if (ret) {
- of_node_put(parent);
+ of_node_put(node);
return -ENXIO;
}
- *id = PCI_SLOT_ID(phbid, bdfn);
+ if (of_device_is_compatible(node, "ibm,ioda2-npu2-opencapi-phb"))
+ *id = PCI_PHB_SLOT_ID(phbid);
+ else
+ *id = PCI_SLOT_ID(phbid, bdfn);
return 0;
}
return tbl;
}
-void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
-{
- struct pci_controller *hose = pci_bus_to_host(pdev->bus);
- struct pnv_phb *phb = hose->private_data;
-#ifdef CONFIG_PCI_IOV
- struct pnv_ioda_pe *pe;
- struct pci_dn *pdn;
-
- /* Fix the VF pdn PE number */
- if (pdev->is_virtfn) {
- pdn = pci_get_pdn(pdev);
- WARN_ON(pdn->pe_number != IODA_INVALID_PE);
- list_for_each_entry(pe, &phb->ioda.pe_list, list) {
- if (pe->rid == ((pdev->bus->number << 8) |
- (pdev->devfn & 0xff))) {
- pdn->pe_number = pe->pe_number;
- pe->pdev = pdev;
- break;
- }
- }
- }
-#endif /* CONFIG_PCI_IOV */
-
- if (phb && phb->dma_dev_setup)
- phb->dma_dev_setup(phb, pdev);
-}
-
-void pnv_pci_dma_bus_setup(struct pci_bus *bus)
-{
- struct pci_controller *hose = bus->sysdata;
- struct pnv_phb *phb = hose->private_data;
- struct pnv_ioda_pe *pe;
-
- list_for_each_entry(pe, &phb->ioda.pe_list, list) {
- if (!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)))
- continue;
-
- if (!pe->pbus)
- continue;
-
- if (bus->number == ((pe->rid >> 8) & 0xFF)) {
- pe->pbus = bus;
- break;
- }
- }
-}
-
struct device_node *pnv_pci_get_phb_node(struct pci_dev *dev)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
int (*msi_setup)(struct pnv_phb *phb, struct pci_dev *dev,
unsigned int hwirq, unsigned int virq,
unsigned int is_64, struct msi_msg *msg);
- void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev);
int (*init_m64)(struct pnv_phb *phb);
int (*get_pe_state)(struct pnv_phb *phb, int pe_no);
void (*freeze_pe)(struct pnv_phb *phb, int pe_no);
extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option);
-extern void pnv_pci_dma_dev_setup(struct pci_dev *pdev);
-extern void pnv_pci_dma_bus_setup(struct pci_bus *bus);
extern int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type);
extern void pnv_teardown_msi_irqs(struct pci_dev *pdev);
extern struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev);
rc = opal_cec_reboot();
else if (strcmp(cmd, "full") == 0)
rc = opal_cec_reboot2(OPAL_REBOOT_FULL_IPL, NULL);
+ else if (strcmp(cmd, "mpipl") == 0)
+ rc = opal_cec_reboot2(OPAL_REBOOT_MPIPL, NULL);
+ else if (strcmp(cmd, "error") == 0)
+ rc = opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR, NULL);
else
rc = OPAL_UNSUPPORTED;
select PPC_DOORBELL
select HOTPLUG_CPU
select ARCH_RANDOM
- select PPC_DOORBELL
select FORCE_SMP
select SWIOTLB
default y
#include <asm/firmware.h>
#include <asm/prom.h>
#include <asm/udbg.h>
+#include <asm/svm.h>
#include "pseries.h"
{FW_FEATURE_LLAN, "hcall-lLAN"},
{FW_FEATURE_BULK_REMOVE, "hcall-bulk"},
{FW_FEATURE_XDABR, "hcall-xdabr"},
- {FW_FEATURE_MULTITCE, "hcall-multi-tce"},
+ {FW_FEATURE_PUT_TCE_IND | FW_FEATURE_STUFF_TCE,
+ "hcall-multi-tce"},
{FW_FEATURE_SPLPAR, "hcall-splpar"},
{FW_FEATURE_VPHN, "hcall-vphn"},
{FW_FEATURE_SET_MODE, "hcall-set-mode"},
}
}
+ if (is_secure_guest() &&
+ (powerpc_firmware_features & FW_FEATURE_PUT_TCE_IND)) {
+ powerpc_firmware_features &= ~FW_FEATURE_PUT_TCE_IND;
+ pr_debug("SVM: disabling PUT_TCE_IND firmware feature\n");
+ }
+
pr_debug(" <- fw_hypertas_feature_init()\n");
}
for (i = 0; i < scns_per_block; i++) {
pfn = PFN_DOWN(phys_addr);
- if (!pfn_present(pfn))
+ if (!pfn_present(pfn)) {
+ phys_addr += MIN_MEMORY_BLOCK_SIZE;
continue;
+ }
rc = rc && is_mem_section_removable(pfn, PAGES_PER_SECTION);
phys_addr += MIN_MEMORY_BLOCK_SIZE;
#include <asm/udbg.h>
#include <asm/mmzone.h>
#include <asm/plpar_wrappers.h>
-#include <asm/svm.h>
#include "pseries.h"
return be64_to_cpu(*tcep);
}
-static void tce_free_pSeriesLP(struct iommu_table*, long, long);
+static void tce_free_pSeriesLP(unsigned long liobn, long, long);
static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
-static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static int tce_build_pSeriesLP(unsigned long liobn, long tcenum, long tceshift,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
unsigned long attrs)
int ret = 0;
long tcenum_start = tcenum, npages_start = npages;
- rpn = __pa(uaddr) >> TCE_SHIFT;
+ rpn = __pa(uaddr) >> tceshift;
proto_tce = TCE_PCI_READ;
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
while (npages--) {
- tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
- rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
+ tce = proto_tce | (rpn & TCE_RPN_MASK) << tceshift;
+ rc = plpar_tce_put((u64)liobn, (u64)tcenum << tceshift, tce);
if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
ret = (int)rc;
- tce_free_pSeriesLP(tbl, tcenum_start,
+ tce_free_pSeriesLP(liobn, tcenum_start,
(npages_start - (npages + 1)));
break;
}
if (rc && printk_ratelimit()) {
printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
- printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
+ printk("\tindex = 0x%llx\n", (u64)liobn);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
printk("\ttce val = 0x%llx\n", tce );
dump_stack();
int ret = 0;
unsigned long flags;
- if ((npages == 1) || !firmware_has_feature(FW_FEATURE_MULTITCE)) {
- return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+ if ((npages == 1) || !firmware_has_feature(FW_FEATURE_PUT_TCE_IND)) {
+ return tce_build_pSeriesLP(tbl->it_index, tcenum,
+ tbl->it_page_shift, npages, uaddr,
direction, attrs);
}
/* If allocation fails, fall back to the loop implementation */
if (!tcep) {
local_irq_restore(flags);
- return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
- direction, attrs);
+ return tce_build_pSeriesLP(tbl->it_index, tcenum,
+ tbl->it_page_shift,
+ npages, uaddr, direction, attrs);
}
__this_cpu_write(tce_page, tcep);
}
return ret;
}
-static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
+static void tce_free_pSeriesLP(unsigned long liobn, long tcenum, long npages)
{
u64 rc;
while (npages--) {
- rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0);
+ rc = plpar_tce_put((u64)liobn, (u64)tcenum << 12, 0);
if (rc && printk_ratelimit()) {
printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
- printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
+ printk("\tindex = 0x%llx\n", (u64)liobn);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
dump_stack();
}
{
u64 rc;
- if (!firmware_has_feature(FW_FEATURE_MULTITCE))
- return tce_free_pSeriesLP(tbl, tcenum, npages);
+ if (!firmware_has_feature(FW_FEATURE_STUFF_TCE))
+ return tce_free_pSeriesLP(tbl->it_index, tcenum, npages);
rc = plpar_tce_stuff((u64)tbl->it_index, (u64)tcenum << 12, 0, npages);
u64 rc = 0;
long l, limit;
+ if (!firmware_has_feature(FW_FEATURE_PUT_TCE_IND)) {
+ unsigned long tceshift = be32_to_cpu(maprange->tce_shift);
+ unsigned long dmastart = (start_pfn << PAGE_SHIFT) +
+ be64_to_cpu(maprange->dma_base);
+ unsigned long tcenum = dmastart >> tceshift;
+ unsigned long npages = num_pfn << PAGE_SHIFT >> tceshift;
+ void *uaddr = __va(start_pfn << PAGE_SHIFT);
+
+ return tce_build_pSeriesLP(be32_to_cpu(maprange->liobn),
+ tcenum, tceshift, npages, (unsigned long) uaddr,
+ DMA_BIDIRECTIONAL, 0);
+ }
+
local_irq_disable(); /* to protect tcep and the page behind it */
tcep = __this_cpu_read(tce_page);
of_reconfig_notifier_register(&iommu_reconfig_nb);
register_memory_notifier(&iommu_mem_nb);
- /*
- * Secure guest memory is inacessible to devices so regular DMA isn't
- * possible.
- *
- * In that case keep devices' dma_map_ops as NULL so that the generic
- * DMA code path will use SWIOTLB to bounce buffers for DMA.
- */
- if (!is_secure_guest())
- set_pci_dma_ops(&dma_iommu_ops);
+ set_pci_dma_ops(&dma_iommu_ops);
}
static int __init disable_multitce(char *str)
{
if (strcmp(str, "off") == 0 &&
firmware_has_feature(FW_FEATURE_LPAR) &&
- firmware_has_feature(FW_FEATURE_MULTITCE)) {
+ (firmware_has_feature(FW_FEATURE_PUT_TCE_IND) ||
+ firmware_has_feature(FW_FEATURE_STUFF_TCE))) {
printk(KERN_INFO "Disabling MULTITCE firmware feature\n");
- powerpc_firmware_features &= ~FW_FEATURE_MULTITCE;
+ powerpc_firmware_features &=
+ ~(FW_FEATURE_PUT_TCE_IND | FW_FEATURE_STUFF_TCE);
}
return 1;
}
{
unsigned long maxmem = 0;
- maxmem += drmem_info->n_lmbs * drmem_info->lmb_size;
+ maxmem += (unsigned long)drmem_info->n_lmbs * drmem_info->lmb_size;
maxmem += hugetlb_total_pages() * PAGE_SIZE;
- seq_printf(m, "MaxMem=%ld\n", maxmem);
+ seq_printf(m, "MaxMem=%lu\n", maxmem);
}
static int pseries_lparcfg_data(struct seq_file *m, void *v)
return rc;
p->bound_addr = saved;
- dev_dbg(&p->pdev->dev, "bound drc 0x%x to %pR\n", p->drc_index, &p->res);
+ dev_dbg(&p->pdev->dev, "bound drc 0x%x to 0x%lx\n",
+ p->drc_index, (unsigned long)saved);
return rc;
}
goto err_out;
p->bound_addr = start_addr;
- dev_dbg(&p->pdev->dev, "bound drc 0x%x to %pR\n", p->drc_index, &p->res);
+ dev_dbg(&p->pdev->dev, "bound drc 0x%x to 0x%lx\n", p->drc_index, start_addr);
return rc;
err_out:
p->bus = nvdimm_bus_register(NULL, &p->bus_desc);
if (!p->bus) {
dev_err(dev, "Error creating nvdimm bus %pOF\n", p->dn);
+ kfree(p->bus_desc.provider_name);
return -ENXIO;
}
ndr_desc.mapping = &mapping;
ndr_desc.num_mappings = 1;
ndr_desc.nd_set = &p->nd_set;
- set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
if (p->is_volatile)
p->region = nvdimm_volatile_region_create(p->bus, &ndr_desc);
nvdimm_bus_unregister(p->bus);
drc_pmem_unbind(p);
+ kfree(p->bus_desc.provider_name);
kfree(p);
return 0;
int pseries_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
{
/* Allocate PCI data */
- add_dev_pci_data(pdev);
+ add_sriov_vf_pdns(pdev);
return pseries_pci_sriov_enable(pdev, num_vfs);
}
/* Releasing pe_num_map */
kfree(pdn->pe_num_map);
/* Release PCI data */
- remove_dev_pci_data(pdev);
+ remove_sriov_vf_pdns(pdev);
pci_vf_drivers_autoprobe(pdev, true);
return 0;
}
if (tbl == NULL)
return NULL;
+ kref_init(&tbl->it_kref);
+
of_parse_dma_window(dev->dev.of_node, dma_window,
&tbl->it_index, &offset, &size);
addr += mfspr(SPRN_MCAR);
if (is_in_pci_mem_space(addr)) {
- if (user_mode(regs)) {
- pagefault_disable();
- ret = get_user(inst, (__u32 __user *)regs->nip);
- pagefault_enable();
- } else {
+ if (user_mode(regs))
+ ret = probe_user_read(&inst, (void __user *)regs->nip,
+ sizeof(inst));
+ else
ret = probe_kernel_address((void *)regs->nip, inst);
- }
if (!ret && mcheck_handle_load(regs, inst)) {
regs->nip += 4;
};
#ifdef CONFIG_SMP
-static struct irq_chip mpic_ipi_chip = {
+static const struct irq_chip mpic_ipi_chip = {
.irq_mask = mpic_mask_ipi,
.irq_unmask = mpic_unmask_ipi,
.irq_eoi = mpic_end_ipi,
};
#ifdef CONFIG_MPIC_U3_HT_IRQS
-static struct irq_chip mpic_irq_ht_chip = {
+static const struct irq_chip mpic_irq_ht_chip = {
.irq_startup = mpic_startup_ht_irq,
.irq_shutdown = mpic_shutdown_ht_irq,
.irq_mask = mpic_mask_irq,
# based on relocs_check.pl
# Copyright © 2009 IBM Corporation
-if [ $# -lt 2 ]; then
- echo "$0 [path to objdump] [path to vmlinux]" 1>&2
+if [ $# -lt 3 ]; then
+ echo "$0 [path to objdump] [path to nm] [path to vmlinux]" 1>&2
exit 1
fi
-# Have Kbuild supply the path to objdump so we handle cross compilation.
+# Have Kbuild supply the path to objdump and nm so we handle cross compilation.
objdump="$1"
-vmlinux="$2"
+nm="$2"
+vmlinux="$3"
+
+# Remove from the bad relocations those that match an undefined weak symbol
+# which will result in an absolute relocation to 0.
+# Weak unresolved symbols are of that form in nm output:
+# " w _binary__btf_vmlinux_bin_end"
+undef_weak_symbols=$($nm "$vmlinux" | awk '$1 ~ /w/ { print $2 }')
bad_relocs=$(
$objdump -R "$vmlinux" |
# These relocations are okay
# On PPC64:
# R_PPC64_RELATIVE, R_PPC64_NONE
- # R_PPC64_ADDR64 mach_<name>
- # R_PPC64_ADDR64 __crc_<name>
# On PPC:
# R_PPC_RELATIVE, R_PPC_ADDR16_HI,
# R_PPC_ADDR16_HA,R_PPC_ADDR16_LO,
R_PPC_ADDR16_HA
R_PPC_RELATIVE
R_PPC_NONE' |
- grep -E -v '\<R_PPC64_ADDR64[[:space:]]+mach_' |
- grep -E -v '\<R_PPC64_ADDR64[[:space:]]+__crc_'
+ ([ "$undef_weak_symbols" ] && grep -F -w -v "$undef_weak_symbols" || cat)
)
if [ -z "$bad_relocs" ]; then
#else
static inline int print_insn_powerpc(unsigned long insn, unsigned long memaddr)
{
- printf("%.8x", insn);
+ printf("%.8lx", insn);
return 0;
}
static inline int print_insn_spu(unsigned long insn, unsigned long memaddr)
{
- printf("%.8x", insn);
+ printf("%.8lx", insn);
return 0;
}
#endif
static void bootcmds(void)
{
+ char tmp[64];
int cmd;
cmd = inchar();
- if (cmd == 'r')
- ppc_md.restart(NULL);
- else if (cmd == 'h')
+ if (cmd == 'r') {
+ getstring(tmp, 64);
+ ppc_md.restart(tmp);
+ } else if (cmd == 'h') {
ppc_md.halt();
- else if (cmd == 'p')
+ } else if (cmd == 'p') {
if (pm_power_off)
pm_power_off();
+ }
}
static int cpu_cmd(void)
printf("pidr = %.16lx tidr = %.16lx\n",
mfspr(SPRN_PID), mfspr(SPRN_TIDR));
- printf("asdr = %.16lx psscr = %.16lx\n",
- mfspr(SPRN_ASDR), hv ? mfspr(SPRN_PSSCR)
- : mfspr(SPRN_PSSCR_PR));
+ printf("psscr = %.16lx\n",
+ hv ? mfspr(SPRN_PSSCR) : mfspr(SPRN_PSSCR_PR));
if (!hv)
return;
- printf("ptcr = %.16lx\n",
- mfspr(SPRN_PTCR));
+ printf("ptcr = %.16lx asdr = %.16lx\n",
+ mfspr(SPRN_PTCR), mfspr(SPRN_ASDR));
#endif
}
depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the
- iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
+ iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
better fan behaviour by default, and some manual control.
config WINDFARM
select I2C_POWERMAC
help
This driver provides thermal control for the PowerMac9,1
- which is the recent (SMU based) single CPU desktop G5
+ which is the recent (SMU based) single CPU desktop G5
config WINDFARM_PM112
tristate "Support for thermal management on PowerMac11,2"
depends on PPC_PMAC
help
This driver provides some support to control the front panel
- blue LEDs "vu-meter" of the XServer macs.
+ blue LEDs "vu-meter" of the XServer macs.
config SENSORS_AMS
tristate "Apple Motion Sensor driver"
void cxl_context_mm_count_get(struct cxl_context *ctx)
{
if (ctx->mm)
- atomic_inc(&ctx->mm->mm_count);
+ mmgrab(ctx->mm);
}
void cxl_context_mm_count_put(struct cxl_context *ctx)
tristate "OpenCAPI coherent accelerator support"
depends on PPC_POWERNV && PCI && EEH
select OCXL_BASE
+ select HOTPLUG_PCI_POWERNV
default m
help
Select this option to enable the ocxl driver for Open
#define DRIVER_AUTHOR "Gavin Shan, IBM Corporation"
#define DRIVER_DESC "PowerPC PowerNV PCI Hotplug Driver"
+#define SLOT_WARN(sl, x...) \
+ ((sl)->pdev ? pci_warn((sl)->pdev, x) : dev_warn(&(sl)->bus->dev, x))
+
struct pnv_php_event {
bool added;
struct pnv_php_slot *php_slot;
static void pnv_php_detach_device_nodes(struct device_node *parent)
{
struct device_node *dn;
- int refcount;
for_each_child_of_node(parent, dn) {
pnv_php_detach_device_nodes(dn);
of_node_put(dn);
- refcount = kref_read(&dn->kobj.kref);
- if (refcount != 1)
- pr_warn("Invalid refcount %d on <%pOF>\n",
- refcount, dn);
-
of_detach_node(dn);
}
}
ret = pnv_pci_get_device_tree(php_slot->dn->phandle, fdt1, 0x10000);
if (ret) {
- pci_warn(php_slot->pdev, "Error %d getting FDT blob\n", ret);
+ SLOT_WARN(php_slot, "Error %d getting FDT blob\n", ret);
goto free_fdt1;
}
dt = of_fdt_unflatten_tree(fdt, php_slot->dn, NULL);
if (!dt) {
ret = -EINVAL;
- pci_warn(php_slot->pdev, "Cannot unflatten FDT\n");
+ SLOT_WARN(php_slot, "Cannot unflatten FDT\n");
goto free_fdt;
}
ret = pnv_php_populate_changeset(&php_slot->ocs, php_slot->dn);
if (ret) {
pnv_php_reverse_nodes(php_slot->dn);
- pci_warn(php_slot->pdev, "Error %d populating changeset\n",
- ret);
+ SLOT_WARN(php_slot, "Error %d populating changeset\n",
+ ret);
goto free_dt;
}
php_slot->dn->child = NULL;
ret = of_changeset_apply(&php_slot->ocs);
if (ret) {
- pci_warn(php_slot->pdev, "Error %d applying changeset\n", ret);
+ SLOT_WARN(php_slot, "Error %d applying changeset\n", ret);
goto destroy_changeset;
}
ret = pnv_pci_set_power_state(php_slot->id, state, &msg);
if (ret > 0) {
if (be64_to_cpu(msg.params[1]) != php_slot->dn->phandle ||
- be64_to_cpu(msg.params[2]) != state ||
- be64_to_cpu(msg.params[3]) != OPAL_SUCCESS) {
- pci_warn(php_slot->pdev, "Wrong msg (%lld, %lld, %lld)\n",
- be64_to_cpu(msg.params[1]),
- be64_to_cpu(msg.params[2]),
- be64_to_cpu(msg.params[3]));
+ be64_to_cpu(msg.params[2]) != state) {
+ SLOT_WARN(php_slot, "Wrong msg (%lld, %lld, %lld)\n",
+ be64_to_cpu(msg.params[1]),
+ be64_to_cpu(msg.params[2]),
+ be64_to_cpu(msg.params[3]));
return -ENOMSG;
}
+ if (be64_to_cpu(msg.params[3]) != OPAL_SUCCESS) {
+ ret = -ENODEV;
+ goto error;
+ }
} else if (ret < 0) {
- pci_warn(php_slot->pdev, "Error %d powering %s\n",
- ret, (state == OPAL_PCI_SLOT_POWER_ON) ? "on" : "off");
- return ret;
+ goto error;
}
if (state == OPAL_PCI_SLOT_POWER_OFF || state == OPAL_PCI_SLOT_OFFLINE)
ret = pnv_php_add_devtree(php_slot);
return ret;
+
+error:
+ SLOT_WARN(php_slot, "Error %d powering %s\n",
+ ret, (state == OPAL_PCI_SLOT_POWER_ON) ? "on" : "off");
+ return ret;
}
EXPORT_SYMBOL_GPL(pnv_php_set_slot_power_state);
*/
ret = pnv_pci_get_power_state(php_slot->id, &power_state);
if (ret) {
- pci_warn(php_slot->pdev, "Error %d getting power status\n",
- ret);
+ SLOT_WARN(php_slot, "Error %d getting power status\n",
+ ret);
} else {
*state = power_state;
}
*state = presence;
ret = 0;
} else {
- pci_warn(php_slot->pdev, "Error %d getting presence\n", ret);
+ SLOT_WARN(php_slot, "Error %d getting presence\n", ret);
}
return ret;
struct pnv_php_slot *php_slot = to_pnv_php_slot(slot);
int ret;
- if (php_slot->state != PNV_PHP_STATE_POPULATED)
+ /*
+ * Allow to disable a slot already in the registered state to
+ * cover cases where the slot couldn't be enabled and never
+ * reached the populated state
+ */
+ if (php_slot->state != PNV_PHP_STATE_POPULATED &&
+ php_slot->state != PNV_PHP_STATE_REGISTERED)
return 0;
/* Remove all devices behind the slot */
ret = pci_hp_register(&php_slot->slot, php_slot->bus,
php_slot->slot_no, php_slot->name);
if (ret) {
- pci_warn(php_slot->pdev, "Error %d registering slot\n", ret);
+ SLOT_WARN(php_slot, "Error %d registering slot\n", ret);
return ret;
}
/* Enable MSIx */
ret = pci_enable_msix_exact(pdev, &entry, 1);
if (ret) {
- pci_warn(pdev, "Error %d enabling MSIx\n", ret);
+ SLOT_WARN(php_slot, "Error %d enabling MSIx\n", ret);
return ret;
}
(sts & PCI_EXP_SLTSTA_PDC)) {
ret = pnv_pci_get_presence_state(php_slot->id, &presence);
if (ret) {
- pci_warn(pdev, "PCI slot [%s] error %d getting presence (0x%04x), to retry the operation.\n",
- php_slot->name, ret, sts);
+ SLOT_WARN(php_slot,
+ "PCI slot [%s] error %d getting presence (0x%04x), to retry the operation.\n",
+ php_slot->name, ret, sts);
return IRQ_HANDLED;
}
*/
event = kzalloc(sizeof(*event), GFP_ATOMIC);
if (!event) {
- pci_warn(pdev, "PCI slot [%s] missed hotplug event 0x%04x\n",
- php_slot->name, sts);
+ SLOT_WARN(php_slot,
+ "PCI slot [%s] missed hotplug event 0x%04x\n",
+ php_slot->name, sts);
return IRQ_HANDLED;
}
/* Allocate workqueue */
php_slot->wq = alloc_workqueue("pciehp-%s", 0, 0, php_slot->name);
if (!php_slot->wq) {
- pci_warn(pdev, "Cannot alloc workqueue\n");
+ SLOT_WARN(php_slot, "Cannot alloc workqueue\n");
pnv_php_disable_irq(php_slot, true);
return;
}
php_slot->name, php_slot);
if (ret) {
pnv_php_disable_irq(php_slot, true);
- pci_warn(pdev, "Error %d enabling IRQ %d\n", ret, irq);
+ SLOT_WARN(php_slot, "Error %d enabling IRQ %d\n", ret, irq);
return;
}
ret = pci_enable_device(pdev);
if (ret) {
- pci_warn(pdev, "Error %d enabling device\n", ret);
+ SLOT_WARN(php_slot, "Error %d enabling device\n", ret);
return;
}
for_each_compatible_node(dn, NULL, "ibm,ioda3-phb")
pnv_php_register(dn);
+ for_each_compatible_node(dn, NULL, "ibm,ioda2-npu2-opencapi-phb")
+ pnv_php_register_one(dn); /* slot directly under the PHB */
return 0;
}
for_each_compatible_node(dn, NULL, "ibm,ioda3-phb")
pnv_php_unregister(dn);
+
+ for_each_compatible_node(dn, NULL, "ibm,ioda2-npu2-opencapi-phb")
+ pnv_php_unregister_one(dn); /* slot directly under the PHB */
}
module_init(pnv_php_init);
# is a no-op.
echo $dev >/sys/kernel/debug/powerpc/eeh_dev_check
- # Enforce a 30s timeout for recovery. Even the IPR, which is infamously
- # slow to reset, should recover within 30s.
- max_wait=30
+ # Default to a 60s timeout when waiting for a device to recover. This
+ # is an arbitrary default which can be overridden by setting the
+ # EEH_MAX_WAIT environmental variable when required.
+
+ # The current record holder for longest recovery time is:
+ # "Adaptec Series 8 12G SAS/PCIe 3" at 39 seconds
+ max_wait=${EEH_MAX_WAIT:=60}
for i in `seq 0 ${max_wait}` ; do
if pe_ok $dev ; then
segv_errors
wild_bctr
large_vm_fork_separation
+bad_accesses
$(MAKE) -C ../
TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot prot_sao segv_errors wild_bctr \
- large_vm_fork_separation
+ large_vm_fork_separation bad_accesses
TEST_GEN_PROGS_EXTENDED := tlbie_test
TEST_GEN_FILES := tempfile
$(OUTPUT)/wild_bctr: CFLAGS += -m64
$(OUTPUT)/large_vm_fork_separation: CFLAGS += -m64
+$(OUTPUT)/bad_accesses: CFLAGS += -m64
$(OUTPUT)/tempfile:
dd if=/dev/zero of=$@ bs=64k count=1
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2019, Michael Ellerman, IBM Corp.
+//
+// Test that out-of-bounds reads/writes behave as expected.
+
+#include <setjmp.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "utils.h"
+
+// Old distros (Ubuntu 16.04 at least) don't define this
+#ifndef SEGV_BNDERR
+#define SEGV_BNDERR 3
+#endif
+
+// 64-bit kernel is always here
+#define PAGE_OFFSET (0xcul << 60)
+
+static unsigned long kernel_virt_end;
+
+static volatile int fault_code;
+static volatile unsigned long fault_addr;
+static jmp_buf setjmp_env;
+
+static void segv_handler(int n, siginfo_t *info, void *ctxt_v)
+{
+ fault_code = info->si_code;
+ fault_addr = (unsigned long)info->si_addr;
+ siglongjmp(setjmp_env, 1);
+}
+
+int bad_access(char *p, bool write)
+{
+ char x;
+
+ fault_code = 0;
+ fault_addr = 0;
+
+ if (sigsetjmp(setjmp_env, 1) == 0) {
+ if (write)
+ *p = 1;
+ else
+ x = *p;
+
+ printf("Bad - no SEGV! (%c)\n", x);
+ return 1;
+ }
+
+ // If we see MAPERR that means we took a page fault rather than an SLB
+ // miss. We only expect to take page faults for addresses within the
+ // valid kernel range.
+ FAIL_IF(fault_code == SEGV_MAPERR && \
+ (fault_addr < PAGE_OFFSET || fault_addr >= kernel_virt_end));
+
+ FAIL_IF(fault_code != SEGV_MAPERR && fault_code != SEGV_BNDERR);
+
+ return 0;
+}
+
+static int using_hash_mmu(bool *using_hash)
+{
+ char line[128];
+ FILE *f;
+ int rc;
+
+ f = fopen("/proc/cpuinfo", "r");
+ FAIL_IF(!f);
+
+ rc = 0;
+ while (fgets(line, sizeof(line), f) != NULL) {
+ if (strcmp(line, "MMU : Hash\n") == 0) {
+ *using_hash = true;
+ goto out;
+ }
+
+ if (strcmp(line, "MMU : Radix\n") == 0) {
+ *using_hash = false;
+ goto out;
+ }
+ }
+
+ rc = -1;
+out:
+ fclose(f);
+ return rc;
+}
+
+static int test(void)
+{
+ unsigned long i, j, addr, region_shift, page_shift, page_size;
+ struct sigaction sig;
+ bool hash_mmu;
+
+ sig = (struct sigaction) {
+ .sa_sigaction = segv_handler,
+ .sa_flags = SA_SIGINFO,
+ };
+
+ FAIL_IF(sigaction(SIGSEGV, &sig, NULL) != 0);
+
+ FAIL_IF(using_hash_mmu(&hash_mmu));
+
+ page_size = sysconf(_SC_PAGESIZE);
+ if (page_size == (64 * 1024))
+ page_shift = 16;
+ else
+ page_shift = 12;
+
+ if (page_size == (64 * 1024) || !hash_mmu) {
+ region_shift = 52;
+
+ // We have 7 512T regions (4 kernel linear, vmalloc, io, vmemmap)
+ kernel_virt_end = PAGE_OFFSET + (7 * (512ul << 40));
+ } else if (page_size == (4 * 1024) && hash_mmu) {
+ region_shift = 46;
+
+ // We have 7 64T regions (4 kernel linear, vmalloc, io, vmemmap)
+ kernel_virt_end = PAGE_OFFSET + (7 * (64ul << 40));
+ } else
+ FAIL_IF(true);
+
+ printf("Using %s MMU, PAGE_SIZE = %dKB start address 0x%016lx\n",
+ hash_mmu ? "hash" : "radix",
+ (1 << page_shift) >> 10,
+ 1ul << region_shift);
+
+ // This generates access patterns like:
+ // 0x0010000000000000
+ // 0x0010000000010000
+ // 0x0010000000020000
+ // ...
+ // 0x0014000000000000
+ // 0x0018000000000000
+ // 0x0020000000000000
+ // 0x0020000000010000
+ // 0x0020000000020000
+ // ...
+ // 0xf400000000000000
+ // 0xf800000000000000
+
+ for (i = 1; i <= ((0xful << 60) >> region_shift); i++) {
+ for (j = page_shift - 1; j < 60; j++) {
+ unsigned long base, delta;
+
+ base = i << region_shift;
+ delta = 1ul << j;
+
+ if (delta >= base)
+ break;
+
+ addr = (base | delta) & ~((1 << page_shift) - 1);
+
+ FAIL_IF(bad_access((char *)addr, false));
+ FAIL_IF(bad_access((char *)addr, true));
+ }
+ }
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(test, "bad_accesses");
+}
if (dbginfo->features & PPC_DEBUG_FEATURE_DATA_BP_RANGE) {
test_sethwdebug_exact(child_pid);
- if (!is_8xx)
- test_sethwdebug_range_aligned(child_pid);
- if (dawr && !is_8xx) {
+ test_sethwdebug_range_aligned(child_pid);
+ if (dawr || is_8xx) {
test_sethwdebug_range_unaligned(child_pid);
test_sethwdebug_range_unaligned_dar(child_pid);
test_sethwdebug_dawr_max_range(child_pid);
projects / linux.git / commitdiff