drop_fpu() and fpu_reset_state() are similar in functionality
and in scope, yet this is not apparent from their names.
drop_fpu() deactivates FPU contents (both the fpregs and the fpstate),
but leaves register contents intact in the eager-FPU case, mostly as an
optimization. It disables fpregs in the lazy FPU case. The drop_fpu()
method can be used to destroy FPU state in an optimized way, when we
know that a new state will be loaded before user-space might see
any remains of the old FPU state:
- such as in sys_exit()'s exit_thread() where we know this task
won't execute any user-space instructions anymore and the
next context switch cleans up the FPU. The old FPU state
might still be around in the eagerfpu case but won't be
saved.
- in __restore_xstate_sig(), where we use drop_fpu() before
copying a new state into the fpstate and activating that one.
No user-pace instructions can execute between those steps.
- in sys_execve()'s fpu__clear(): there we use drop_fpu() in
the !eagerfpu case, where it's equivalent to a full reinit.
fpu_reset_state() is a stronger version of drop_fpu(): both in
the eagerfpu and the lazy-FPU case it guarantees that fpregs
are reinitialized to init state. This method is used in cases
where we need a full reset:
- handle_signal() uses fpu_reset_state() to reset the FPU state
to init before executing a user-space signal handler. While we
have already saved the original FPU state at this point, and
always restore the original state, the signal handling code
still has to do this reinit, because signals may interrupt
any user-space instruction, and the FPU might be in various
intermediate states (such as an unbalanced x87 stack) that is
not immediately usable for general C signal handler code.
- __restore_xstate_sig() uses fpu_reset_state() when the signal
frame has no FP context. Since the signal handler may have
modified the FPU state, it gets reset back to init state.
- in another branch __restore_xstate_sig() uses fpu_reset_state()
to handle a restoration error: when restore_user_xstate() fails
to restore FPU state and we might have inconsistent FPU data,
fpu_reset_state() is used to reset it back to a known good
state.
- __kernel_fpu_end() uses fpu_reset_state() in an error branch.
This is in a 'must not trigger' error branch, so on bug-free
kernels this never triggers.
- fpu__restore() uses fpu_reset_state() in an error path
as well: if the fpstate was set up with invalid FPU state
(via ptrace or via a signal handler), then it's reset back
to init state.
- likewise, the scheduler's switch_fpu_finish() uses it in a
restoration error path too.
Move both drop_fpu() and fpu_reset_state() to the fpu__*() namespace
and harmonize their naming with their function:
fpu__drop()
fpu__reset()
This clearly shows that both methods operate on the full state of the
FPU, just like fpu__restore().
Also add comments to explain what each function does.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__fpregs_deactivate_hw();
}
-static inline void drop_fpu(struct fpu *fpu)
+/*
+ * Drops current FPU state: deactivates the fpregs and
+ * the fpstate. NOTE: it still leaves previous contents
+ * in the fpregs in the eager-FPU case.
+ *
+ * This function can be used in cases where we know that
+ * a state-restore is coming: either an explicit one,
+ * or a reschedule.
+ */
+static inline void fpu__drop(struct fpu *fpu)
{
- /*
- * Forget coprocessor state..
- */
preempt_disable();
fpu->counter = 0;
}
/*
- * Reset the FPU state in the eager case and drop it in the lazy case (later use
- * will reinit it).
+ * Reset the FPU state back to init state.
*/
-static inline void fpu_reset_state(struct fpu *fpu)
+static inline void fpu__reset(struct fpu *fpu)
{
if (!use_eager_fpu())
- drop_fpu(fpu);
+ fpu__drop(fpu);
else
restore_init_xstate();
}
{
if (fpu_switch.preload) {
if (unlikely(restore_fpu_checking(new_fpu)))
- fpu_reset_state(new_fpu);
+ fpu__reset(new_fpu);
}
}
if (fpu->fpregs_active) {
if (WARN_ON(restore_fpu_checking(fpu)))
- fpu_reset_state(fpu);
+ fpu__reset(fpu);
} else {
__fpregs_deactivate_hw();
}
kernel_fpu_disable();
fpregs_activate(fpu);
if (unlikely(restore_fpu_checking(fpu))) {
- fpu_reset_state(fpu);
+ fpu__reset(fpu);
force_sig_info(SIGSEGV, SEND_SIG_PRIV, tsk);
} else {
tsk->thread.fpu.counter++;
if (!use_eager_fpu()) {
/* FPU state will be reallocated lazily at the first use. */
- drop_fpu(fpu);
+ fpu__drop(fpu);
} else {
if (!fpu->fpstate_active) {
fpu__activate_curr(fpu);
config_enabled(CONFIG_IA32_EMULATION));
if (!buf) {
- fpu_reset_state(fpu);
+ fpu__reset(fpu);
return 0;
}
* We will be ready to restore/save the state only after
* fpu->fpstate_active is again set.
*/
- drop_fpu(fpu);
+ fpu__drop(fpu);
if (__copy_from_user(&fpu->state.xsave, buf_fx, state_size) ||
__copy_from_user(&env, buf, sizeof(env))) {
*/
user_fpu_begin();
if (restore_user_xstate(buf_fx, xfeatures, fx_only)) {
- fpu_reset_state(fpu);
+ fpu__reset(fpu);
return -1;
}
}
kfree(bp);
}
- drop_fpu(fpu);
+ fpu__drop(fpu);
}
void flush_thread(void)
* Ensure the signal handler starts with the new fpu state.
*/
if (fpu->fpstate_active)
- fpu_reset_state(fpu);
+ fpu__reset(fpu);
}
signal_setup_done(failed, ksig, stepping);
}
projects / linux.git / commitdiff