dt-bindings: display: tfp410: Add bus-width parameter property

tfp410 can be connect to host processor in 24bit, single-edge (24 lines) or
12bit, dual-edge (12 lines).

Add bus-width to the documentation so it can be used to select between the
two connection scheme.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401124143.17179-2-peter.ujfalusi@ti.com

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
index 3f903af93949ddaa380ba708e3f3406792b6e032..5ff4f64ef8e85a961892da76f06f317650429822 100644 (file)
--- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
@@ -18,7 +18,14 @@ This device has two video ports. Their connections are modeled using the OF
 graph bindings specified in [1]. Each port node shall have a single endpoint.
 
 - Port 0 is the DPI input port. Its endpoint subnode shall contain a
-  pclk-sample property and a remote-endpoint property as specified in [1].
+  pclk-sample and bus-width property and a remote-endpoint property as specified
+  in [1].
+  - If pclk-sample is not defined, pclk-sample = 0 should be assumed for
+    backward compatibility.
+  - If bus-width is not defined then bus-width = 24 should be assumed for
+    backward compatibility.
+    bus-width = 24: 24 data lines are connected and single-edge mode
+    bus-width = 12: 12 data lines are connected and dual-edge mode
 
 - Port 1 is the DVI output port. Its endpoint subnode shall contain a
   remote-endpoint property is specified in [1].
@@ -43,6 +50,7 @@ tfp410: encoder@0 {
 
                        tfp410_in: endpoint@0 {
                                pclk-sample = <1>;
+                               bus-width = <24>;
                                remote-endpoint = <&dpi_out>;
                        };
                };