ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings

Move the native-mode property inside the display-timings node.

According to
Documentation/devicetree/bindings/display/panel/display-timing.txt.
native-mode is a property of the display-timings node.

If it's located outside of display-timings, the native-mode setting is
ignored and the first display timing is used (which is a problem only if
someone adds another display timing).

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 5606f417e9e807d72f303ba55556e2b4ddc31f33..bf883e45576a64dfe7ac5755534dce246443b436 100644 (file)
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -14,11 +14,11 @@ chosen {
 
        display0: LQ035Q7 {
                model = "Sharp-LQ035Q7";
-               native-mode = <&timing0>;
                bits-per-pixel = <16>;
                fsl,pcr = <0xf00080c0>;
 
                display-timings {
+                       native-mode = <&timing0>;
                        timing0: 240x320 {
                                clock-frequency = <5500000>;
                                hactive = <240>;