Fix up all conflicts between the memory.h cleanup and bug fixes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
--- /dev/null
+What: /sys/class/scsi_host/hostX/isci_id
+Date: June 2011
+Contact: Dave Jiang <dave.jiang@intel.com>
+Description:
+ This file contains the enumerated host ID for the Intel
+ SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+ Storage Control Unit embeds up to two 4-port controllers in
+ a single PCI device. The controllers are enumerated in order
+ which usually means the lowest number scsi_host corresponds
+ with the first controller, but this association is not
+ guaranteed. The 'isci_id' attribute unambiguously identifies
+ the controller index: '0' for the first controller,
+ '1' for the second.
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-h264-vui-sar-idc">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC</constant> </entry>
<entry>enum v4l2_mpeg_video_h264_vui_sar_idc</entry>
</row>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-h264-level">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LEVEL</constant> </entry>
<entry>enum v4l2_mpeg_video_h264_level</entry>
</row>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-mpeg4-level">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL</constant> </entry>
<entry>enum v4l2_mpeg_video_mpeg4_level</entry>
</row>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-h264-profile">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_PROFILE</constant> </entry>
- <entry>enum v4l2_mpeg_h264_profile</entry>
+ <entry>enum v4l2_mpeg_video_h264_profile</entry>
</row>
<row><entry spanname="descr">The profile information for H264.
Applicable to the H264 encoder.
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-mpeg4-profile">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE</constant> </entry>
- <entry>enum v4l2_mpeg_mpeg4_profile</entry>
+ <entry>enum v4l2_mpeg_video_mpeg4_profile</entry>
</row>
<row><entry spanname="descr">The profile information for MPEG4.
Applicable to the MPEG4 encoder.
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-multi-slice-mode">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE</constant> </entry>
- <entry>enum v4l2_mpeg_multi_slice_mode</entry>
+ <entry>enum v4l2_mpeg_video_multi_slice_mode</entry>
</row>
<row><entry spanname="descr">Determines how the encoder should handle division of frame into slices.
Applicable to the encoder.
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-h264-loop-filter-mode">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE</constant> </entry>
- <entry>enum v4l2_mpeg_h264_loop_filter_mode</entry>
+ <entry>enum v4l2_mpeg_video_h264_loop_filter_mode</entry>
</row>
<row><entry spanname="descr">Loop filter mode for H264 encoder.
Possible values are:</entry>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-h264-entropy-mode">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE</constant> </entry>
- <entry>enum v4l2_mpeg_h264_symbol_mode</entry>
+ <entry>enum v4l2_mpeg_video_h264_entropy_mode</entry>
</row>
<row><entry spanname="descr">Entropy coding mode for H264 - CABAC/CAVALC.
Applicable to the H264 encoder.
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-video-header-mode">
<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_HEADER_MODE</constant> </entry>
- <entry>enum v4l2_mpeg_header_mode</entry>
+ <entry>enum v4l2_mpeg_video_header_mode</entry>
</row>
<row><entry spanname="descr">Determines whether the header is returned as the first buffer or is
it returned together with the first frame. Applicable to encoders.
Applicable to the H264 encoder.</entry>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-mfc51-video-frame-skip-mode">
<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE</constant> </entry>
- <entry>enum v4l2_mpeg_mfc51_frame_skip_mode</entry>
+ <entry>enum v4l2_mpeg_mfc51_video_frame_skip_mode</entry>
</row>
<row><entry spanname="descr">
Indicates in what conditions the encoder should skip frames. If encoding a frame would cause the encoded stream to be larger then
</entry>
</row>
<row><entry></entry></row>
- <row>
+ <row id="v4l2-mpeg-mfc51-video-force-frame-type">
<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE</constant> </entry>
- <entry>enum v4l2_mpeg_mfc51_force_frame_type</entry>
+ <entry>enum v4l2_mpeg_mfc51_video_force_frame_type</entry>
</row>
<row><entry spanname="descr">Force a frame type for the next queued buffer. Applicable to encoders.
Possible values are:</entry>
5.2 stat file
-5.2.1 memory.stat file includes following statistics
+memory.stat file includes following statistics
# per-memory cgroup local status
cache - # of bytes of page cache memory.
file_mapped is accounted only when the memory cgroup is owner of page
cache.)
-5.2.2 memory.vmscan_stat
-
-memory.vmscan_stat includes statistics information for memory scanning and
-freeing, reclaiming. The statistics shows memory scanning information since
-memory cgroup creation and can be reset to 0 by writing 0 as
-
- #echo 0 > ../memory.vmscan_stat
-
-This file contains following statistics.
-
-[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy]
-[param]_elapsed_ns_by_[reason]_[under_hierarchy]
-
-For example,
-
- scanned_file_pages_by_limit indicates the number of scanned
- file pages at vmscan.
-
-Now, 3 parameters are supported
-
- scanned - the number of pages scanned by vmscan
- rotated - the number of pages activated at vmscan
- freed - the number of pages freed by vmscan
-
-If "rotated" is high against scanned/freed, the memcg seems busy.
-
-Now, 2 reason are supported
-
- limit - the memory cgroup's limit
- system - global memory pressure + softlimit
- (global memory pressure not under softlimit is not handled now)
-
-When under_hierarchy is added in the tail, the number indicates the
-total memcg scan of its children and itself.
-
-elapsed_ns is a elapsed time in nanosecond. This may include sleep time
-and not indicates CPU usage. So, please take this as just showing
-latency.
-
-Here is an example.
-
-# cat /cgroup/memory/A/memory.vmscan_stat
-scanned_pages_by_limit 9471864
-scanned_anon_pages_by_limit 6640629
-scanned_file_pages_by_limit 2831235
-rotated_pages_by_limit 4243974
-rotated_anon_pages_by_limit 3971968
-rotated_file_pages_by_limit 272006
-freed_pages_by_limit 2318492
-freed_anon_pages_by_limit 962052
-freed_file_pages_by_limit 1356440
-elapsed_ns_by_limit 351386416101
-scanned_pages_by_system 0
-scanned_anon_pages_by_system 0
-scanned_file_pages_by_system 0
-rotated_pages_by_system 0
-rotated_anon_pages_by_system 0
-rotated_file_pages_by_system 0
-freed_pages_by_system 0
-freed_anon_pages_by_system 0
-freed_file_pages_by_system 0
-elapsed_ns_by_system 0
-scanned_pages_by_limit_under_hierarchy 9471864
-scanned_anon_pages_by_limit_under_hierarchy 6640629
-scanned_file_pages_by_limit_under_hierarchy 2831235
-rotated_pages_by_limit_under_hierarchy 4243974
-rotated_anon_pages_by_limit_under_hierarchy 3971968
-rotated_file_pages_by_limit_under_hierarchy 272006
-freed_pages_by_limit_under_hierarchy 2318492
-freed_anon_pages_by_limit_under_hierarchy 962052
-freed_file_pages_by_limit_under_hierarchy 1356440
-elapsed_ns_by_limit_under_hierarchy 351386416101
-scanned_pages_by_system_under_hierarchy 0
-scanned_anon_pages_by_system_under_hierarchy 0
-scanned_file_pages_by_system_under_hierarchy 0
-rotated_pages_by_system_under_hierarchy 0
-rotated_anon_pages_by_system_under_hierarchy 0
-rotated_file_pages_by_system_under_hierarchy 0
-freed_pages_by_system_under_hierarchy 0
-freed_anon_pages_by_system_under_hierarchy 0
-freed_file_pages_by_system_under_hierarchy 0
-elapsed_ns_by_system_under_hierarchy 0
-
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
interface that was used by acer-wmi driver. It will replaced by
information log when acer-wmi initial.
Who: Lee, Chun-Yi <jlee@novell.com>
+
+----------------------------
+What: The XFS nodelaylog mount option
+When: 3.3
+Why: The delaylog mode that has been the default since 2.6.39 has proven
+ stable, and the old code is in the way of additional improvements in
+ the log code.
+Who: Christoph Hellwig <hch@lst.de>
All Sysfs entries are named with their core_id (represented here by 'X').
tempX_input - Core temperature (in millidegrees Celsius).
tempX_max - All cooling devices should be turned on (on Core2).
- Initialized with IA32_THERM_INTERRUPT. When the CPU
- temperature reaches this temperature, an interrupt is
- generated and tempX_max_alarm is set.
-tempX_max_hyst - If the CPU temperature falls below than temperature,
- an interrupt is generated and tempX_max_alarm is reset.
-tempX_max_alarm - Set if the temperature reaches or exceeds tempX_max.
- Reset if the temperature drops to or below tempX_max_hyst.
tempX_crit - Maximum junction temperature (in millidegrees Celsius).
tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
Correct CPU operation is no longer guaranteed.
number. For Package temp, this will be "Physical id Y",
where Y is the package number.
-The TjMax temperature is set to 85 degrees C if undocumented model specific
-register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
-(sometimes) documented in processor datasheet.
+On CPU models which support it, TjMax is read from a model-specific register.
+On other models, it is set to an arbitrary value based on weak heuristics.
+If these heuristics don't work for you, you can pass the correct TjMax value
+as a module parameter (tjmax).
Appendix A. Known TjMax lists (TBD):
Some information comes from ark.intel.com
the devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
+WARNING: Do not access chip registers using the i2cdump command, and do not use
+any of the i2ctools commands on a command register (0xa5 to 0xac). The chips
+supported by this driver interpret any access to a command register (including
+read commands) as request to execute the command in question. This may result in
+power loss, board resets, and/or Flash corruption. Worst case, your board may
+turn into a brick.
+
Sysfs entries
-------------
<mailto:thomas@winischhofer.net>
0xF4 00-1F video/mbxfb.h mbxfb
<mailto:raph@8d.com>
+0xF6 all LTTng Linux Trace Toolkit Next Generation
+ <mailto:mathieu.desnoyers@efficios.com>
0xFD all linux/dm-ioctl.h
Override pmtimer IOPort with a hex value.
e.g. pmtmr=0x508
- pnp.debug [PNP]
- Enable PNP debug messages. This depends on the
- CONFIG_PNP_DEBUG_MESSAGES option.
+ pnp.debug=1 [PNP]
+ Enable PNP debug messages (depends on the
+ CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time
+ via /sys/module/pnp/parameters/debug. We always show
+ current resource usage; turning this on also shows
+ possible settings and some assignment information.
pnpacpi= [ACPI]
{ off }
00-INDEX
- this file
+3c359.txt
+ - information on the 3Com TokenLink Velocity XL (3c5359) driver.
3c505.txt
- information on the 3Com EtherLink Plus (3c505) driver.
+3c509.txt
+ - information on the 3Com Etherlink III Series Ethernet cards.
6pack.txt
- info on the 6pack protocol, an alternative to KISS for AX.25
DLINK.txt
- info on the D-Link DE-600/DE-620 parallel port pocket adapters
PLIP.txt
- PLIP: The Parallel Line Internet Protocol device driver
+README.ipw2100
+ - README for the Intel PRO/Wireless 2100 driver.
+README.ipw2200
+ - README for the Intel PRO/Wireless 2915ABG and 2200BG driver.
README.sb1000
- info on General Instrument/NextLevel SURFboard1000 cable modem.
alias.txt
- info on where to get ATM programs and support for Linux.
ax25.txt
- info on using AX.25 and NET/ROM code for Linux
+batman-adv.txt
+ - B.A.T.M.A.N routing protocol on top of layer 2 Ethernet Frames.
baycom.txt
- info on the driver for Baycom style amateur radio modems
+bonding.txt
+ - Linux Ethernet Bonding Driver HOWTO: link aggregation in Linux.
bridge.txt
- where to get user space programs for ethernet bridging with Linux.
can.txt
- Conexant AccessRunner USB ADSL Modem
cxacru-cf.py
- Conexant AccessRunner USB ADSL Modem configuration file parser
+cxgb.txt
+ - Release Notes for the Chelsio N210 Linux device driver.
+dccp.txt
+ - the Datagram Congestion Control Protocol (DCCP) (RFC 4340..42).
de4x5.txt
- the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver
decnet.txt
- info on using the DECnet networking layer in Linux.
depca.txt
- the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver
+dl2k.txt
+ - README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko).
+dm9000.txt
+ - README for the Simtec DM9000 Network driver.
dmfe.txt
- info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
+dns_resolver.txt
+ - The DNS resolver module allows kernel servies to make DNS queries.
+driver.txt
+ - Softnet driver issues.
e100.txt
- info on Intel's EtherExpress PRO/100 line of 10/100 boards
e1000.txt
- info on Intel's E1000 line of gigabit ethernet boards
+e1000e.txt
+ - README for the Intel Gigabit Ethernet Driver (e1000e).
eql.txt
- serial IP load balancing
ewrk3.txt
- the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
+fib_trie.txt
+ - Level Compressed Trie (LC-trie) notes: a structure for routing.
filter.txt
- Linux Socket Filtering
fore200e.txt
- FORE Systems PCA-200E/SBA-200E ATM NIC driver info.
framerelay.txt
- info on using Frame Relay/Data Link Connection Identifier (DLCI).
+gen_stats.txt
+ - Generic networking statistics for netlink users.
+generic_hdlc.txt
+ - The generic High Level Data Link Control (HDLC) layer.
generic_netlink.txt
- info on Generic Netlink
+gianfar.txt
+ - Gianfar Ethernet Driver.
ieee802154.txt
- Linux IEEE 802.15.4 implementation, API and drivers
+ifenslave.c
+ - Configure network interfaces for parallel routing (bonding).
+igb.txt
+ - README for the Intel Gigabit Ethernet Driver (igb).
+igbvf.txt
+ - README for the Intel Gigabit Ethernet Driver (igbvf).
ip-sysctl.txt
- /proc/sys/net/ipv4/* variables
ip_dynaddr.txt
- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
iphase.txt
- Interphase PCI ATM (i)Chip IA Linux driver info.
+ipv6.txt
+ - Options to the ipv6 kernel module.
+ipvs-sysctl.txt
+ - Per-inode explanation of the /proc/sys/net/ipv4/vs interface.
irda.txt
- where to get IrDA (infrared) utilities and info for Linux.
+ixgb.txt
+ - README for the Intel 10 Gigabit Ethernet Driver (ixgb).
+ixgbe.txt
+ - README for the Intel 10 Gigabit Ethernet Driver (ixgbe).
+ixgbevf.txt
+ - README for the Intel Virtual Function (VF) Driver (ixgbevf).
+l2tp.txt
+ - User guide to the L2TP tunnel protocol.
lapb-module.txt
- programming information of the LAPB module.
ltpc.txt
- the Apple or Farallon LocalTalk PC card driver
+mac80211-injection.txt
+ - HOWTO use packet injection with mac80211
multicast.txt
- Behaviour of cards under Multicast
+multiqueue.txt
+ - HOWTO for multiqueue network device support.
+netconsole.txt
+ - The network console module netconsole.ko: configuration and notes.
+netdev-features.txt
+ - Network interface features API description.
netdevices.txt
- info on network device driver functions exported to the kernel.
+netif-msg.txt
+ - Design of the network interface message level setting (NETIF_MSG_*).
+nfc.txt
+ - The Linux Near Field Communication (NFS) subsystem.
olympic.txt
- IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info.
+operstates.txt
+ - Overview of network interface operational states.
+packet_mmap.txt
+ - User guide to memory mapped packet socket rings (PACKET_[RT]X_RING).
+phonet.txt
+ - The Phonet packet protocol used in Nokia cellular modems.
+phy.txt
+ - The PHY abstraction layer.
+pktgen.txt
+ - User guide to the kernel packet generator (pktgen.ko).
policy-routing.txt
- IP policy-based routing
+ppp_generic.txt
+ - Information about the generic PPP driver.
+proc_net_tcp.txt
+ - Per inode overview of the /proc/net/tcp and /proc/net/tcp6 interfaces.
+radiotap-headers.txt
+ - Background on radiotap headers.
ray_cs.txt
- Raylink Wireless LAN card driver info.
+rds.txt
+ - Background on the reliable, ordered datagram delivery method RDS.
+regulatory.txt
+ - Overview of the Linux wireless regulatory infrastructure.
+rxrpc.txt
+ - Guide to the RxRPC protocol.
+s2io.txt
+ - Release notes for Neterion Xframe I/II 10GbE driver.
+scaling.txt
+ - Explanation of network scaling techniques: RSS, RPS, RFS, aRFS, XPS.
+sctp.txt
+ - Notes on the Linux kernel implementation of the SCTP protocol.
+secid.txt
+ - Explanation of the secid member in flow structures.
skfp.txt
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
smc9.txt
- the driver for SMC's 9000 series of Ethernet cards
smctr.txt
- SMC TokenCard TokenRing Linux driver info.
+spider-net.txt
+ - README for the Spidernet Driver (as found in PS3 / Cell BE).
+stmmac.txt
+ - README for the STMicro Synopsys Ethernet driver.
+tc-actions-env-rules.txt
+ - rules for traffic control (tc) actions.
+timestamping.txt
+ - overview of network packet timestamping variants.
tcp.txt
- short blurb on how TCP output takes place.
+tcp-thin.txt
+ - kernel tuning options for low rate 'thin' TCP streams.
tlan.txt
- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
tms380tr.txt
- SysKonnect Token Ring ISA/PCI adapter driver info.
+tproxy.txt
+ - Transparent proxy support user guide.
tuntap.txt
- TUN/TAP device driver, allowing user space Rx/Tx of packets.
+udplite.txt
+ - UDP-Lite protocol (RFC 3828) introduction.
vortex.txt
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
+vxge.txt
+ - README for the Neterion X3100 PCIe Server Adapter.
x25.txt
- general info on X.25 development.
x25-iface.txt
- description of the X.25 Packet Layer to LAPB device interface.
+xfrm_proc.txt
+ - description of the statistics package for XFRM.
+xfrm_sync.txt
+ - sync patches for XFRM enable migration of an SA between hosts.
+xfrm_sysctl.txt
+ - description of the XFRM configuration options.
z8530drv.txt
- info about Linux driver for Z8530 based HDLC cards for AX.25
+Note: This driver doesn't have a maintainer.
+
Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
This program is free software; you can redistribute it and/or
Authors:
Sten Wang <sten_wang@davicom.com.tw > : Original Author
-Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
Contributors:
TRUE: disable IPv4-mapped address feature
FALSE: enable IPv4-mapped address feature
- Default: FALSE (as specified in RFC2553bis)
+ Default: FALSE (as specified in RFC3493)
IPv6 Fragmentation:
The functional behaviour for certain settings is different
depending on whether local forwarding is enabled or not.
-accept_ra - BOOLEAN
+accept_ra - INTEGER
Accept Router Advertisements; autoconfigure using them.
Possible values are:
The amount of Duplicate Address Detection probes to send.
Default: 1
-forwarding - BOOLEAN
+forwarding - INTEGER
Configure interface-specific Host/Router behaviour.
Note: It is recommended to have the same setting on all
configure. In the bnx2x driver, for instance, this parameter is called
num_queues. A typical RSS configuration would be to have one receive queue
for each CPU if the device supports enough queues, or otherwise at least
-one for each cache domain at a particular cache level (L1, L2, etc.).
+one for each memory domain, where a memory domain is a set of CPUs that
+share a particular memory level (L1, L2, NUMA node, etc.).
The indirection table of an RSS device, which resolves a queue by masked
hash, is usually programmed by the driver at initialization. The
interrupt processing forms a bottleneck. Spreading load between CPUs
decreases queue length. For low latency networking, the optimal setting
is to allocate as many queues as there are CPUs in the system (or the
-NIC maximum, if lower). Because the aggregate number of interrupts grows
-with each additional queue, the most efficient high-rate configuration
+NIC maximum, if lower). The most efficient high-rate configuration
is likely the one with the smallest number of receive queues where no
-CPU that processes receive interrupts reaches 100% utilization. Per-cpu
-load can be observed using the mpstat utility.
+receive queue overflows due to a saturated CPU, because in default
+mode with interrupt coalescing enabled, the aggregate number of
+interrupts (and thus work) grows with each additional queue.
+
+Per-cpu load can be observed using the mpstat utility, but note that on
+processors with hyperthreading (HT), each hyperthread is represented as
+a separate CPU. For interrupt handling, HT has shown no benefit in
+initial tests, so limit the number of queues to the number of CPU cores
+in the system.
RPS: Receive Packet Steering
== Suggested Configuration
For a single queue device, a typical RPS configuration would be to set
-the rps_cpus to the CPUs in the same cache domain of the interrupting
+the rps_cpus to the CPUs in the same memory domain of the interrupting
CPU. If NUMA locality is not an issue, this could also be all CPUs in
the system. At high interrupt rate, it might be wise to exclude the
interrupting CPU from the map since that already performs much work.
receive queue is mapped to each CPU, then RPS is probably redundant
and unnecessary. If there are fewer hardware queues than CPUs, then
RPS might be beneficial if the rps_cpus for each queue are the ones that
-share the same cache domain as the interrupting CPU for that queue.
+share the same memory domain as the interrupting CPU for that queue.
RFS: Receive Flow Steering
The number of entries in the per-queue flow table are set through:
- /sys/class/net/<dev>/queues/tx-<n>/rps_flow_cnt
+ /sys/class/net/<dev>/queues/rx-<n>/rps_flow_cnt
== Suggested Configuration
corresponding socket structure for the flow (e.g. a TCP connection).
This transmit queue is used for subsequent packets sent on the flow to
prevent out of order (ooo) packets. The choice also amortizes the cost
-of calling get_xps_queues() over all packets in the connection. To avoid
+of calling get_xps_queues() over all packets in the flow. To avoid
ooo packets, the queue for a flow can subsequently only be changed if
skb->ooo_okay is set for a packet in the flow. This flag indicates that
there are no outstanding packets in the flow, so the transmit queue can
void pm_runtime_irq_safe(struct device *dev);
- set the power.irq_safe flag for the device, causing the runtime-PM
- suspend and resume callbacks (but not the idle callback) to be invoked
- with interrupts disabled
+ callbacks to be invoked with interrupts off
void pm_runtime_mark_last_busy(struct device *dev);
- set the power.last_busy field to the current time
khugepaged runs usually at low frequency so while one may not want to
invoke defrag algorithms synchronously during the page faults, it
should be worth invoking defrag at least in khugepaged. However it's
-also possible to disable defrag in khugepaged:
+also possible to disable defrag in khugepaged by writing 0 or enable
+defrag in khugepaged by writing 1:
-echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
-echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
You can also control how many pages khugepaged should scan at each
pass:
ATLX ETHERNET DRIVERS
M: Jay Cliburn <jcliburn@gmail.com>
M: Chris Snook <chris.snook@gmail.com>
-M: Jie Yang <jie.yang@atheros.com>
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
BROCADE BNA 10 GIGABIT ETHERNET DRIVER
M: Rasesh Mody <rmody@brocade.com>
-M: Debashis Dutt <ddutt@brocade.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/bna/
CISCO VIC ETHERNET NIC DRIVER
M: Christian Benvenuti <benve@cisco.com>
-M: Vasanthy Kolluri <vkolluri@cisco.com>
M: Roopa Prabhu <roprabhu@cisco.com>
M: David Wang <dwang2@cisco.com>
S: Supported
F: drivers/connector/
CONTROL GROUPS (CGROUPS)
-M: Paul Menage <menage@google.com>
+M: Paul Menage <paul@paulmenage.org>
M: Li Zefan <lizf@cn.fujitsu.com>
L: containers@lists.linux-foundation.org
S: Maintained
F: tools/power/cpupower
CPUSETS
-M: Paul Menage <menage@google.com>
+M: Paul Menage <paul@paulmenage.org>
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
S: Supported
F: drivers/net/wan/sdla.c
FRAMEBUFFER LAYER
-M: Paul Mundt <lethal@linux-sh.org>
+M: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
L: linux-fbdev@vger.kernel.org
W: http://linux-fbdev.sourceforge.net/
Q: http://patchwork.kernel.org/project/linux-fbdev/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
+T: git git://github.com/schandinat/linux-2.6.git fbdev-next
S: Maintained
F: Documentation/fb/
F: Documentation/devicetree/bindings/fb/
F: drivers/input/input-mt.c
K: \b(ABS|SYN)_MT_
+INTEL C600 SERIES SAS CONTROLLER DRIVER
+M: Intel SCU Linux support <intel-linux-scu@intel.com>
+M: Dan Williams <dan.j.williams@intel.com>
+M: Dave Jiang <dave.jiang@intel.com>
+M: Ed Nadolski <edmund.nadolski@intel.com>
+L: linux-scsi@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
+S: Maintained
+F: drivers/scsi/isci/
+F: firmware/isci/
+
INTEL IDLE DRIVER
M: Len Brown <lenb@kernel.org>
L: linux-pm@lists.linux-foundation.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
W: http://patchwork.ozlabs.org/project/netdev/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
S: Maintained
F: net/
F: include/net/
OSD LIBRARY and FILESYSTEM
M: Boaz Harrosh <bharrosh@panasas.com>
-M: Benny Halevy <bhalevy@panasas.com>
+M: Benny Halevy <bhalevy@tonian.com>
L: osd-dev@open-osd.org
W: http://open-osd.org
T: git git://git.open-osd.org/open-osd.git
SAMSUNG AUDIO (ASoC) DRIVERS
M: Jassi Brar <jassisinghbrar@gmail.com>
+M: Sangbeom Kim <sbkim73@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/samsung
F: arch/arm/mach-tegra
TEHUTI ETHERNET DRIVER
-M: Alexander Indenbaum <baum@tehutinetworks.net>
M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
S: Supported
F: drivers/mmc/host/vub300.c
W1 DALLAS'S 1-WIRE BUS
-M: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+M: Evgeniy Polyakov <zbr@ioremap.net>
S: Maintained
F: Documentation/w1/
F: drivers/w1/
S: Supported
F: Documentation/hwmon/wm83??
F: drivers/leds/leds-wm83*.c
+F: drivers/input/misc/wm831x-on.c
+F: drivers/input/touchscreen/wm831x-ts.c
+F: drivers/input/touchscreen/wm97*.c
F: drivers/mfd/wm8*.c
F: drivers/power/wm83*.c
F: drivers/rtc/rtc-wm83*.c
F: include/linux/mfd/wm831x/
F: include/linux/mfd/wm8350/
F: include/linux/mfd/wm8400*
+F: include/linux/wm97xx.h
F: include/sound/wm????.h
F: sound/soc/codecs/wm*
VERSION = 3
PATCHLEVEL = 1
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc9
NAME = "Divemaster Edition"
# *DOCUMENTATION*
def_bool y
config GENERIC_GPIO
- def_bool y
+ bool
config ZONE_DMA
bool
#define UAC_NOFIX 2
#define UAC_SIGBUS 4
-
-#ifdef __KERNEL__
-
-/* This is the shift that is applied to the UAC bits as stored in the
- per-thread flags. See thread_info.h. */
-#define UAC_SHIFT 6
-
-#endif
-
#endif /* __ASM_ALPHA_SYSINFO_H */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_POLLING_NRFLAG 8 /* poll_idle is polling NEED_RESCHED */
#define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */
-#define TIF_UAC_NOPRINT 10 /* see sysinfo.h */
-#define TIF_UAC_NOFIX 11
-#define TIF_UAC_SIGBUS 12
+#define TIF_UAC_NOPRINT 10 /* ! Preserve sequence of following */
+#define TIF_UAC_NOFIX 11 /* ! flags as they match */
+#define TIF_UAC_SIGBUS 12 /* ! userspace part of 'osf_sysinfo' */
#define TIF_MEMDIE 13 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */
#define TIF_FREEZE 16 /* is freezing for suspend */
#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \
| _TIF_SYSCALL_TRACE)
-#define ALPHA_UAC_SHIFT 10
+#define ALPHA_UAC_SHIFT TIF_UAC_NOPRINT
#define ALPHA_UAC_MASK (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
1 << TIF_UAC_SIGBUS)
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/sysinfo.h>
+#include <asm/thread_info.h>
#include <asm/hwrpb.h>
#include <asm/processor.h>
case GSI_UACPROC:
if (nbytes < sizeof(unsigned int))
return -EINVAL;
- w = (current_thread_info()->flags >> UAC_SHIFT) & UAC_BITMASK;
- if (put_user(w, (unsigned int __user *)buffer))
- return -EFAULT;
+ w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) &
+ UAC_BITMASK;
+ if (put_user(w, (unsigned int __user *)buffer))
+ return -EFAULT;
return 1;
case GSI_PROC_TYPE:
case SSIN_UACPROC:
again:
old = current_thread_info()->flags;
- new = old & ~(UAC_BITMASK << UAC_SHIFT);
- new = new | (w & UAC_BITMASK) << UAC_SHIFT;
+ new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT);
+ new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT;
if (cmpxchg(¤t_thread_info()->flags,
old, new) != old)
goto again;
.quad sys_newuname
.quad sys_nanosleep /* 340 */
.quad sys_mremap
- .quad sys_nfsservctl
+ .quad sys_ni_syscall /* old nfsservctl */
.quad sys_setresuid
.quad sys_getresuid
.quad sys_pciconfig_read /* 345 */
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_USES_GETTIMEOFFSET
- select NEED_MEMORY_H
+ select NEED_MACH_MEMORY_H
help
This enables support for the Cirrus EP93xx series of CPUs.
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select NEED_MACH_MEMORY_H
help
Support for ST-Ericsson U300 series mobile platforms.
This workaround defines cpu_relax() as smp_mb(), preventing correctly
written polling loops from denying visibility of updates to memory.
+config ARM_ERRATA_364296
+ bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
+ depends on CPU_V6 && !SMP
+ help
+ This options enables the workaround for the 364296 ARM1136
+ r0p2 erratum (possible cache data corruption with
+ hit-under-miss enabled). It sets the undocumented bit 31 in
+ the auxiliary control register and the FI bit in the control
+ register, thus disabling hit-under-miss without putting the
+ processor into full low interrupt latency mode. ARM11MPCore
+ is not affected.
+
+config ARM_ERRATA_764369
+ bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for erratum 764369
+ affecting Cortex-A9 MPCore with two or more processors (all
+ current revisions). Under certain timing circumstances, a data
+ cache line maintenance operation by MVA targeting an Inner
+ Shareable memory region may fail to proceed up to either the
+ Point of Coherency or to the Point of Unification of the
+ system. This workaround adds a DSB instruction before the
+ relevant cache maintenance functions and sets a specific bit
+ in the diagnostic control register of the SCU.
+
endmenu
source "arch/arm/common/Kconfig"
bool
depends on CPU_FREQ && ARCH_PXA && PXA25x
default y
+ select CPU_FREQ_TABLE
select CPU_FREQ_DEFAULT_GOV_USERSPACE
config CPU_FREQ_S3C
/* Disable clock to MMC hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
+ __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3);
mmc_update_progress(MMC_PROGRESS_DONE);
}
goto err;
/* Disable clock to SDHI1 hardware block */
- __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3);
+ __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
mmc_update_progress(MMC_PROGRESS_DONE);
};
sdhci@c8000200 {
- gpios = <&gpio 69 0>, /* cd, gpio PI5 */
- <&gpio 57 0>, /* wp, gpio PH1 */
- <&gpio 155 0>; /* power, gpio PT3 */
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 155 0>; /* gpio PT3 */
};
sdhci@c8000600 {
- gpios = <&gpio 58 0>, /* cd, gpio PH2 */
- <&gpio 59 0>, /* wp, gpio PH3 */
- <&gpio 70 0>; /* power, gpio PI6 */
+ cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ support-8bit;
};
};
};
sdhci@c8000400 {
- gpios = <&gpio 69 0>, /* cd, gpio PI5 */
- <&gpio 57 0>, /* wp, gpio PH1 */
- <&gpio 70 0>; /* power, gpio PI6 */
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ };
+
+ sdhci@c8000600 {
+ support-8bit;
};
};
*/
#include <linux/device.h>
+#include <linux/gpio.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <asm/hardware/scoop.h>
/* PCMCIA to Scoop linkage
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G45=y
+CONFIG_MACH_AT91SAM9M10G45EK=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_CFG80211=y
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_CARL9170=m
+CONFIG_B43=m
+CONFIG_B43_PHY_N=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL8192CU=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_ATMEL=y
+CONFIG_FB_UDL=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_SDIO_UART=m
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_DMADEVICES=y
+CONFIG_AT_HDMAC=y
+CONFIG_DMATEST=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
#ifdef CONFIG_SMP
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \
smp_mb(); \
__asm__ __volatile__( \
- "1: ldrex %1, [%2]\n" \
+ "1: ldrex %1, [%3]\n" \
" " insn "\n" \
- "2: strex %1, %0, [%2]\n" \
- " teq %1, #0\n" \
+ "2: strex %2, %0, [%3]\n" \
+ " teq %2, #0\n" \
" bne 1b\n" \
" mov %0, #0\n" \
- __futex_atomic_ex_table("%4") \
- : "=&r" (ret), "=&r" (oldval) \
+ __futex_atomic_ex_table("%5") \
+ : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
#include <linux/preempt.h>
#include <asm/domain.h>
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \
__asm__ __volatile__( \
- "1: " T(ldr) " %1, [%2]\n" \
+ "1: " T(ldr) " %1, [%3]\n" \
" " insn "\n" \
- "2: " T(str) " %0, [%2]\n" \
+ "2: " T(str) " %0, [%3]\n" \
" mov %0, #0\n" \
- __futex_atomic_ex_table("%4") \
- : "=&r" (ret), "=&r" (oldval) \
+ __futex_atomic_ex_table("%5") \
+ : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
int cmp = (encoded_op >> 24) & 15;
int oparg = (encoded_op << 8) >> 20;
int cmparg = (encoded_op << 20) >> 20;
- int oldval = 0, ret;
+ int oldval = 0, ret, tmp;
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
oparg = 1 << oparg;
switch (op) {
case FUTEX_OP_SET:
- __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_ADD:
- __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_OR:
- __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
- __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg);
+ __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
break;
case FUTEX_OP_XOR:
- __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
default:
ret = -ENOSYS;
/* not all ARM platforms necessarily support this API ... */
#include <mach/gpio.h>
+#ifndef __ARM_GPIOLIB_COMPLEX
+/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
+#include <asm-generic/gpio.h>
+
+/* The trivial gpiolib dispatchers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#endif
+
+/*
+ * Provide a default gpio_to_irq() which should satisfy every case.
+ * However, some platforms want to do this differently, so allow them
+ * to override it.
+ */
+#ifndef gpio_to_irq
+#define gpio_to_irq __gpio_to_irq
+#endif
+
#endif /* _ARCH_ARM_GPIO_H */
#define L2X0_CLEAN_INV_LINE_PA 0x7F0
#define L2X0_CLEAN_INV_LINE_IDX 0x7F8
#define L2X0_CLEAN_INV_WAY 0x7FC
-#define L2X0_LOCKDOWN_WAY_D 0x900
-#define L2X0_LOCKDOWN_WAY_I 0x904
+/*
+ * The lockdown registers repeat 8 times for L310, the L210 has only one
+ * D and one I lockdown register at 0x0900 and 0x0904.
+ */
+#define L2X0_LOCKDOWN_WAY_D_BASE 0x900
+#define L2X0_LOCKDOWN_WAY_I_BASE 0x904
+#define L2X0_LOCKDOWN_STRIDE 0x08
#define L2X0_TEST_OPERATION 0xF00
#define L2X0_LINE_DATA 0xF10
#define L2X0_LINE_TAG 0xF30
#define L2X0_AUX_CTRL_MASK 0xc0000fff
#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16
#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17
-#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17)
+#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17)
#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22
#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26
#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27
#include <mach/hardware.h>
#include <asm-generic/gpio.h>
+#define __ARM_GPIOLIB_COMPLEX
+
#define IOP3XX_N_GPIOS 8
static inline int gpio_get_value(unsigned gpio)
#ifndef __ASM_HARDWARE_IT8152_H
#define __ASM_HARDWARE_IT8152_H
-extern unsigned long it8152_base_address;
+extern void __iomem *it8152_base_address;
#define IT8152_IO_BASE (it8152_base_address + 0x03e00000)
#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000)
* encoded error on failure.
*/
extern struct platform_device *
-reserve_pmu(enum arm_pmu_type device);
+reserve_pmu(enum arm_pmu_type type);
/**
* release_pmu() - Relinquish control of the performance counters
* the actual hardware initialisation.
*/
extern int
-init_pmu(enum arm_pmu_type device);
+init_pmu(enum arm_pmu_type type);
#else /* CONFIG_CPU_HAS_PMU */
#include <linux/err.h>
static inline struct platform_device *
-reserve_pmu(enum arm_pmu_type device)
+reserve_pmu(enum arm_pmu_type type)
{
return ERR_PTR(-ENODEV);
}
static inline int
-release_pmu(struct platform_device *pdev)
+release_pmu(enum arm_pmu_type type)
{
return -ENODEV;
}
static inline int
-init_pmu(enum arm_pmu_type device)
+init_pmu(enum arm_pmu_type type)
{
return -ENODEV;
}
/*
* Unimplemented (or alternatively implemented) syscalls
*/
-#define __IGNORE_fadvise64_64 1
-#define __IGNORE_migrate_pages 1
+#define __IGNORE_fadvise64_64
+#define __IGNORE_migrate_pages
#endif /* __KERNEL__ */
#endif /* __ASM_ARM_UNISTD_H */
CALL(sys_ni_syscall) /* vm86 */
CALL(sys_ni_syscall) /* was sys_query_module */
CALL(sys_poll)
- CALL(sys_nfsservctl)
+ CALL(sys_ni_syscall) /* was nfsservctl */
/* 170 */ CALL(sys_setresgid16)
CALL(sys_getresgid16)
CALL(sys_prctl)
{
if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
pr_warning("received registration request for unknown "
- "device %d\n", type);
+ "PMU device type %d\n", type);
return -EINVAL;
}
device_initcall(register_pmu_driver);
struct platform_device *
-reserve_pmu(enum arm_pmu_type device)
+reserve_pmu(enum arm_pmu_type type)
{
struct platform_device *pdev;
- if (test_and_set_bit_lock(device, &pmu_lock)) {
+ if (test_and_set_bit_lock(type, &pmu_lock)) {
pdev = ERR_PTR(-EBUSY);
- } else if (pmu_devices[device] == NULL) {
- clear_bit_unlock(device, &pmu_lock);
+ } else if (pmu_devices[type] == NULL) {
+ clear_bit_unlock(type, &pmu_lock);
pdev = ERR_PTR(-ENODEV);
} else {
- pdev = pmu_devices[device];
+ pdev = pmu_devices[type];
}
return pdev;
EXPORT_SYMBOL_GPL(reserve_pmu);
int
-release_pmu(enum arm_pmu_type device)
+release_pmu(enum arm_pmu_type type)
{
- if (WARN_ON(!pmu_devices[device]))
+ if (WARN_ON(!pmu_devices[type]))
return -EINVAL;
- clear_bit_unlock(device, &pmu_lock);
+ clear_bit_unlock(type, &pmu_lock);
return 0;
}
EXPORT_SYMBOL_GPL(release_pmu);
}
int
-init_pmu(enum arm_pmu_type device)
+init_pmu(enum arm_pmu_type type)
{
int err = 0;
- switch (device) {
+ switch (type) {
case ARM_PMU_DEVICE_CPU:
err = init_cpu_pmu();
break;
default:
- pr_warning("attempt to initialise unknown device %d\n",
- device);
+ pr_warning("attempt to initialise PMU of unknown "
+ "type %d\n", type);
err = -EINVAL;
}
mov r0,#0
ldr r1,kexec_mach_type
ldr r2,kexec_boot_atags
- mov pc,lr
+ ARM( mov pc, lr )
+ THUMB( bx lr )
.align
if (arch >= CPU_ARCH_ARMv6) {
if ((cachetype & (7 << 29)) == 4 << 29) {
/* ARMv7 register format */
+ arch = CPU_ARCH_ARMv7;
cacheid = CACHEID_VIPT_NONALIASING;
if ((cachetype & (3 << 14)) == 1 << 14)
cacheid |= CACHEID_ASID_TAGGED;
- else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7))
- cacheid |= CACHEID_VIPT_I_ALIASING;
- } else if (cachetype & (1 << 23)) {
- cacheid = CACHEID_VIPT_ALIASING;
} else {
- cacheid = CACHEID_VIPT_NONALIASING;
- if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6))
- cacheid |= CACHEID_VIPT_I_ALIASING;
+ arch = CPU_ARCH_ARMv6;
+ if (cachetype & (1 << 23))
+ cacheid = CACHEID_VIPT_ALIASING;
+ else
+ cacheid = CACHEID_VIPT_NONALIASING;
}
+ if (cpu_has_aliasing_icache(arch))
+ cacheid |= CACHEID_VIPT_I_ALIASING;
} else {
cacheid = CACHEID_VIVT;
}
#include <asm/smp_scu.h>
#include <asm/cacheflush.h>
+#include <asm/cputype.h>
#define SCU_CTRL 0x00
#define SCU_CONFIG 0x04
{
u32 scu_ctrl;
+#ifdef CONFIG_ARM_ERRATA_764369
+ /* Cortex-A9 only */
+ if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
+ scu_ctrl = __raw_readl(scu_base + 0x30);
+ if (!(scu_ctrl & 1))
+ __raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+ }
+#endif
+
scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
/* already enabled? */
if (scu_ctrl & 1)
clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+ clockevents_register_device(clk);
+
/* Make sure our local interrupt controller has this enabled */
gic_enable_ppi(clk->irq);
-
- clockevents_register_device(clk);
}
#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
#define ARM_EXIT_KEEP(x) x
+#define ARM_EXIT_DISCARD(x)
#else
#define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x) x
#endif
OUTPUT_ARCH(arm)
SECTIONS
{
/*
+ * XXX: The linker does not define how output sections are
+ * assigned to input sections when there are multiple statements
+ * matching the same input section name. There is no documented
+ * order of matching.
+ *
* unwind exit sections must be discarded before the rest of the
* unwind sections get included.
*/
*(.ARM.extab.exit.text)
ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+ ARM_EXIT_DISCARD(EXIT_TEXT)
+ ARM_EXIT_DISCARD(EXIT_DATA)
+ EXIT_CALL
#ifndef CONFIG_HOTPLUG
*(.ARM.exidx.devexit.text)
*(.ARM.extab.devexit.text)
#ifndef CONFIG_SMP_ON_UP
*(.alt.smp.init)
#endif
+ *(.discard)
+ *(.discard.*)
}
#ifdef CONFIG_XIP_KERNEL
STABS_DEBUG
.comment 0 : { *(.comment) }
-
- /* Default discards */
- DISCARDS
}
/*
#include <asm/mach/irq.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/gpio.h>
#include <mach/at91cap9.h>
#include <mach/at91cap9_matrix.h>
#include <mach/at91sam9_smc.h>
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9260_matrix.h>
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9261.h>
#include <mach/at91sam9261_matrix.h>
#include <mach/at91sam9_smc.h>
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9263.h>
#include <mach/at91sam9263_matrix.h>
#include <mach/at91sam9_smc.h>
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91sam9_smc.h>
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91sam9_smc.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/map.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91cap9_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91sam9260_matrix.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include <mach/cpu.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include <mach/at91rm9200_mc.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include <mach/cpu.h>
#include <linux/clk.h>
#include <linux/errno.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/debugfs.h>
#include <mach/hardware.h>
#include <mach/at91_pio.h>
-#include <mach/gpio.h>
-
-#include <asm/gpio.h>
#include "generic.h"
*/
#include <asm/errno.h>
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(gpio) (gpio)
#define irq_to_gpio(irq) (irq)
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <mach/board.h>
-#include <mach/gpio.h>
/* ------------------------------------------------------------------------- */
* (at your option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/suspend.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <asm/mach/irq.h>
#include <mach/at91_pmc.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
* published by the Free Software Foundation.
*/
-#include <mach/hardware.h>
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
#include <linux/io.h>
#include <asm/proc-fns.h>
-#include <mach/hardware.h>
static inline void arch_idle(void)
{
*/
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <mach/cns3xxx.h>
#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
return &cns3xxx_pcie[root->domain];
}
-static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev)
+static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev)
{
return sysdata_to_cnspci(dev->sysdata);
}
# Common objects
obj-y := time.o clock.o serial.o io.o psc.o \
- gpio.o dma.o usb.o common.o sram.o aemif.o
+ dma.o usb.o common.o sram.o aemif.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o
obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o
obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
obj-$(CONFIG_AINTC) += irq.o
obj-$(CONFIG_CP_INTC) += cp_intc.o
},
};
+#ifdef CONFIG_MTD
+static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
+{
+ char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+ size_t retlen;
+
+ if (!strcmp(mtd->name, "MAC-Address")) {
+ mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
+ if (retlen == ETH_ALEN)
+ pr_info("Read MAC addr from SPI Flash: %pM\n",
+ mac_addr);
+ }
+}
+
+static struct mtd_notifier da850evm_spi_notifier = {
+ .add = da850_evm_m25p80_notify_add,
+};
+
+static void da850_evm_setup_mac_addr(void)
+{
+ register_mtd_user(&da850evm_spi_notifier);
+}
+#else
+static void da850_evm_setup_mac_addr(void) { }
+#endif
+
static struct mtd_partition da850_evm_norflash_partition[] = {
{
.name = "bootloaders + env",
if (ret)
pr_warning("da850_evm_init: sata registration failed: %d\n",
ret);
+
+ da850_evm_setup_mac_addr();
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <mach/da8xx.h>
#include <mach/cpufreq.h>
#include <mach/pm.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <mach/common.h>
#include <mach/asp.h>
#include <mach/spi.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <asm/mach/map.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
#include <mach/spi.h>
-
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
--- /dev/null
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DAVINCI_DAVINCI_GPIO_H
+#define __DAVINCI_DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+#include <mach/irqs.h>
+#include <mach/common.h>
+
+#define DAVINCI_GPIO_BASE 0x01C67000
+
+enum davinci_gpio_type {
+ GPIO_TYPE_DAVINCI = 0,
+ GPIO_TYPE_TNETV107X,
+};
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX registers to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
+ * and maybe for later updates, code may write GPIO(N). These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
+ * may not support all the GPIOs in that range.
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip. For now, they won't be usable as IRQ sources.
+ */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
+
+struct davinci_gpio_controller {
+ struct gpio_chip chip;
+ int irq_base;
+ spinlock_t lock;
+ void __iomem *regs;
+ void __iomem *set_data;
+ void __iomem *clr_data;
+ void __iomem *in_data;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct davinci_gpio_controller *
+__gpio_to_controller(unsigned gpio)
+{
+ struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
+ int index = gpio / 32;
+
+ if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
+ return NULL;
+
+ return ctlrs + index;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+ return 1 << (gpio % 32);
+}
+
+#endif /* __DAVINCI_DAVINCI_GPIO_H */
#ifndef __DAVINCI_GPIO_H
#define __DAVINCI_GPIO_H
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
#include <asm-generic/gpio.h>
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
- GPIO_TYPE_DAVINCI = 0,
- GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code may write GPIO(N). These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip. For now, they won't be usable as IRQ sources.
- */
-#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
- struct gpio_chip chip;
- int irq_base;
- spinlock_t lock;
- void __iomem *regs;
- void __iomem *set_data;
- void __iomem *clr_data;
- void __iomem *in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
- struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
- int index = gpio / 32;
-
- if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
- return NULL;
-
- return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
- return 1 << (gpio % 32);
-}
+/* The inline versions use the static inlines in the driver header */
+#include "gpio-davinci.h"
/*
* The get/set/clear functions will inline when called with constant
return __gpio_cansleep(gpio);
}
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned irq)
{
/* don't support the reverse mapping */
#define PSC_STATE_DISABLE 2
#define PSC_STATE_ENABLE 3
-#define MDSTAT_STATE_MASK 0x1f
+#define MDSTAT_STATE_MASK 0x3f
#define MDCTL_FORCE BIT(31)
#ifndef __ASSEMBLER__
ENDPROC(davinci_ddr_psc_config)
CACHE_FLUSH:
- .word arm926_flush_kern_cache_all
+#ifdef CONFIG_CPU_V6
+ .word v6_flush_kern_cache_all
+#else
+ .word arm926_flush_kern_cache_all
+#endif
ENTRY(davinci_cpu_suspend_sz)
.word . - davinci_cpu_suspend
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <mach/psc.h>
#include <mach/cp_intc.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/hardware.h>
#include <mach/tnetv107x.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
void __init dove_spi1_init(void)
{
- orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+ orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
}
/*****************************************************************************
#include <mach/fb.h>
#include <mach/ep93xx_keypad.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-/*
- * arch/arm/mach-ep93xx/include/mach/gpio.h
- */
+/* Include file for the EP93XX GPIO controller machine specifics */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
+#ifndef __GPIO_EP93XX_H
+#define __GPIO_EP93XX_H
/* GPIO port A. */
#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
/* maximum value for irq capable line identifiers */
#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
-/* new generic GPIO API - see Documentation/gpio.txt */
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-/*
- * Map GPIO A0..A7 (0..7) to irq 64..71,
- * B0..B7 (7..15) to irq 72..79, and
- * F0..F7 (16..24) to irq 80..87.
- */
-#define gpio_to_irq(gpio) \
- (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
-
-#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
-
-#endif
+#endif /* __GPIO_EP93XX_H */
* TS72xx memory map:
*
* virt phys size
- * febff000 22000000 4K model number register
+ * febff000 22000000 4K model number register (bits 0-2)
* febfe000 22400000 4K options register
* febfd000 22800000 4K options register #2
* febf9000 10800000 4K TS-5620 RTC index register
#define TS72XX_MODEL_TS7200 0x00
#define TS72XX_MODEL_TS7250 0x01
#define TS72XX_MODEL_TS7260 0x02
+#define TS72XX_MODEL_TS7300 0x03
+#define TS72XX_MODEL_TS7400 0x04
+#define TS72XX_MODEL_MASK 0x07
#define TS72XX_OPTIONS_PHYS_BASE 0x22400000
#ifndef __ASSEMBLY__
+static inline int ts72xx_model(void)
+{
+ return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
+}
+
static inline int board_is_ts7200(void)
{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
+ return ts72xx_model() == TS72XX_MODEL_TS7200;
}
static inline int board_is_ts7250(void)
{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
+ return ts72xx_model() == TS72XX_MODEL_TS7250;
}
static inline int board_is_ts7260(void)
{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+ return ts72xx_model() == TS72XX_MODEL_TS7260;
+}
+
+static inline int board_is_ts7300(void)
+{
+ return ts72xx_model() == TS72XX_MODEL_TS7300;
+}
+
+static inline int board_is_ts7400(void)
+{
+ return ts72xx_model() == TS72XX_MODEL_TS7400;
}
static inline int is_max197_installed(void)
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/fb.h>
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.ctrlbit = (1 << 21),
}, {
.name = "ac97",
- .id = -1,
+ .devname = "samsung-ac97",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 27),
}, {
.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "exynos4-fimc.0",
+ .name = "sclk_cam0",
.enable = exynos4_clksrc_mask_cam_ctrl,
.ctrlbit = (1 << 16),
},
.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "exynos4-fimc.1",
+ .name = "sclk_cam1",
.enable = exynos4_clksrc_mask_cam_ctrl,
.ctrlbit = (1 << 20),
},
vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1), pll_4650);
+ __raw_readl(S5P_VPLL_CON1), pll_4650c);
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
#include <plat/exynos4.h>
#include <plat/adc-core.h>
#include <plat/sdhci.h>
-#include <plat/devs.h>
#include <plat/fb-core.h>
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
+#include <plat/reset.h>
#include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
local_irq_enable();
}
+static void exynos4_sw_reset(void)
+{
+ __raw_writel(0x1, S5P_SWRESET);
+}
+
/*
* exynos4_map_io
*
/* set idle function */
pm_idle = exynos4_idle;
+ /* set sw_reset function */
+ s5p_reset_hook = exynos4_sw_reset;
+
return sysdev_register(&exynos4_sysdev);
}
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
/* GPIO bank sizes */
#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
#define IRQ_HSMMC3 IRQ_SPI(76)
#define IRQ_DWMCI IRQ_SPI(77)
-#define IRQ_MIPICSI0 IRQ_SPI(78)
-
-#define IRQ_MIPICSI1 IRQ_SPI(80)
+#define IRQ_MIPI_CSIS0 IRQ_SPI(78)
+#define IRQ_MIPI_CSIS1 IRQ_SPI(80)
#define IRQ_ONENAND_AUDI IRQ_SPI(82)
#define IRQ_ROTATOR IRQ_SPI(83)
#define S5P_USE_STANDBY_WFE1 (1 << 25)
#define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24))
+#define S5P_SWRESET S5P_PMUREG(0x0400)
+
#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
#include <mach/regs-gpio.h>
+#include <asm/mach/irq.h>
+
static DEFINE_SPINLOCK(eint_lock);
static unsigned int eint0_15_data[16];
static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
exynos4_irq_demux_eint(IRQ_EINT(16));
exynos4_irq_demux_eint(IRQ_EINT(24));
+ chained_irq_exit(chip, desc);
}
static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
u32 *irq_data = irq_get_handler_data(irq);
struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
chip->irq_mask(&desc->irq_data);
if (chip->irq_ack)
generic_handle_irq(*irq_data);
chip->irq_unmask(&desc->irq_data);
+ chained_irq_exit(chip, desc);
}
int __init exynos4_init_irq_eint(void)
};
static struct regulator_consumer_supply max8952_consumer =
- REGULATOR_SUPPLY("vddarm", NULL);
+ REGULATOR_SUPPLY("vdd_arm", NULL);
static struct max8952_platform_data universal_max8952_pdata __initdata = {
.gpio_vid0 = EXYNOS4_GPX0(3),
};
static struct regulator_consumer_supply lp3974_buck1_consumer =
- REGULATOR_SUPPLY("vddint", NULL);
+ REGULATOR_SUPPLY("vdd_int", NULL);
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
return ((cycle_t)hi << 32) | lo;
}
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+ exynos4_mct_frc_start(0, 0);
+}
+
struct clocksource mct_frc = {
.name = "mct-frc",
.rating = 400,
.read = exynos4_frc_read,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .resume = exynos4_frc_resume,
};
static void __init exynos4_clocksource_init(void)
}
/* Setup the local clock events for a CPU */
-void __cpuinit local_timer_setup(struct clock_event_device *evt)
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
exynos4_mct_tick_init(evt);
+
+ return 0;
}
int local_timer_ack(void)
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
+
+ set_cpu_online(cpu, true);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
if (rows > 8) {
/* Set all the necessary GPX2 pins: KP_ROW[0~7] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3));
+ s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
+ S3C_GPIO_PULL_UP);
/* Set all the necessary GPX3 pins: KP_ROW[8~] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8),
- S3C_GPIO_SFN(3));
+ s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
} else {
/* Set all the necessary GPX2 pins: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows,
- S3C_GPIO_SFN(3));
+ s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
+ S3C_GPIO_PULL_UP);
}
/* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */
rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK);
writel(rstcon, EXYNOS4_RSTCON);
- udelay(50);
+ udelay(80);
clk_disable(otg_clk);
clk_put(otg_clk);
config ARCH_NETWINDER
bool "NetWinder"
select CLKSRC_I8253
+ select CLKEVT_I8253
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <video/vga.h>
#include <asm/irq.h>
#include <asm/system.h>
#define __MACH_GPIO_H__
#include <mach/irqs.h>
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE)
#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <mach/iomux-mx3.h>
/*
.init = eukrea_cpuimx27_timer_init,
};
-MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
.atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init = eukrea_cpuimx35_timer_init,
};
-MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
+MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
/* Maintainer: Eukrea Electromatique */
.atag_offset = 0x100,
.map_io = mx35_map_io,
.init = eukrea_cpuimx25_timer_init,
};
-MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
+MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
/* Maintainer: Eukrea Electromatique */
.atag_offset = 0x100,
.map_io = mx25_map_io,
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
mx31_3ds_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
-#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
.flash_bbt = 1,
#endif
};
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mtd/physmap.h>
+#include <video/vga.h>
#include <mach/hardware.h>
#include <mach/platform.h>
static void __init ap_map_io(void)
{
iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+ vga_base = PCI_MEMORY_VADDR;
}
#define INTEGRATOR_SC_VALID_INT 0x003fffff
static void integrator_clocksource_init(u32 khz)
{
void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
- u32 ctrl = TIMER_CTRL_ENABLE;
+ u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
if (khz >= 1500) {
khz /= 16;
- ctrl = TIMER_CTRL_DIV16;
+ ctrl |= TIMER_CTRL_DIV16;
}
- writel(ctrl, base + TIMER_CTRL);
writel(0xffff, base + TIMER_LOAD);
+ writel(ctrl, base + TIMER_CTRL);
clocksource_mmio_init(base + TIMER_VALUE, "timer2",
khz * 1000, 200, 16, clocksource_mmio_readl_down);
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <video/vga.h>
#include <mach/hardware.h>
#include <mach/platform.h>
pcibios_min_io = 0x6000;
pcibios_min_mem = 0x00100000;
- vga_base = PCI_MEMORY_VADDR;
/*
* Hook in our fault handler for PCI errors
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
static DEFINE_SPINLOCK(ixp2000_slowport_lock);
static unsigned long ixp2000_slowport_irq_flags;
*
* Copyright (C) 2002 Intel Corporation.
*
- * This program is free software, you can redistribute it and/or modify
+ * This program is free software, you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* IXP2000 GPIO in/out, edge/level detection for IRQs:
* IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.
+ * or both Falling-edge and Rising-edge.
* This must be called *before* the corresponding IRQ is registerd.
* Use this instead of directly setting the GPIO registers.
* GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <asm/mach/flash.h>
#include <asm/mach/arch.h>
-#include <mach/gpio.h>
-
+#include <mach/gpio-ixp2000.h>
/*************************************************************************
* IXDP2x00 IRQ Initialization
* Author: Rod Whitby <rod@whitby.id.au>
* Maintainers: http://www.nslu2-linux.org/
*/
-
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <asm/gpio.h>
#define DSMG600_SDA_PIN 5
#define DSMG600_SCL_PIN 4
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/serial.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/gpio.h>
#define FSG_SDA_PIN 12
#define FSG_SCL_PIN 13
#include <linux/kernel.h>
#include <mach/hardware.h>
+#define __ARM_GPIOLIB_COMPLEX
+
static inline int gpio_request(unsigned gpio, const char *label)
{
return 0;
#include <asm-generic/gpio.h> /* cansleep wrappers */
extern int gpio_to_irq(int gpio);
+#define gpio_to_irq gpio_to_irq
extern int irq_to_gpio(unsigned int irq);
#endif
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/gpio.h>
#define NAS100D_SDA_PIN 5
#define NAS100D_SCL_PIN 6
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/serial.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <asm/gpio.h>
#define NSLU2_SDA_PIN 7
#define NSLU2_SCL_PIN 6
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
-#include <asm/gpio.h>
#include "common.h"
static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include <plat/mpp.h>
#include "common.h"
# Makefile for KS8695 architecture support
#
-obj-y := cpu.o irq.o time.o gpio.o devices.o
+obj-y := cpu.o irq.o time.o devices.o
obj-m :=
obj-n :=
obj- :=
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <asm/mach/irq.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include "generic.h"
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <asm/mach/irq.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include "generic.h"
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include <mach/devices.h>
#include "generic.h"
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_KS8659_GPIO_H
+#define __MACH_KS8659_GPIO_H
+
+#include <linux/kernel.h>
+
+#define KS8695_GPIO_0 0
+#define KS8695_GPIO_1 1
+#define KS8695_GPIO_2 2
+#define KS8695_GPIO_3 3
+#define KS8695_GPIO_4 4
+#define KS8695_GPIO_5 5
+#define KS8695_GPIO_6 6
+#define KS8695_GPIO_7 7
+#define KS8695_GPIO_8 8
+#define KS8695_GPIO_9 9
+#define KS8695_GPIO_10 10
+#define KS8695_GPIO_11 11
+#define KS8695_GPIO_12 12
+#define KS8695_GPIO_13 13
+#define KS8695_GPIO_14 14
+#define KS8695_GPIO_15 15
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/* Register the GPIOs */
+extern void ks8695_register_gpios(void);
+
+#endif /* __MACH_KS8659_GPIO_H */
#ifndef __ASM_ARCH_GPIO_H_
#define __ASM_ARCH_GPIO_H_
-#include <linux/kernel.h>
-
-#define KS8695_GPIO_0 0
-#define KS8695_GPIO_1 1
-#define KS8695_GPIO_2 2
-#define KS8695_GPIO_3 3
-#define KS8695_GPIO_4 4
-#define KS8695_GPIO_5 5
-#define KS8695_GPIO_6 6
-#define KS8695_GPIO_7 7
-#define KS8695_GPIO_8 8
-#define KS8695_GPIO_9 9
-#define KS8695_GPIO_10 10
-#define KS8695_GPIO_11 11
-#define KS8695_GPIO_12 12
-#define KS8695_GPIO_13 13
-#define KS8695_GPIO_14 14
-#define KS8695_GPIO_15 15
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
/*
* Map IRQ number to GPIO line.
*/
extern int irq_to_gpio(unsigned int irq);
-#include <asm-generic/gpio.h>
-
-/* If it turns out that we need to optimise GPIO access for the
- * Micrel's GPIOs, then these can be changed to check their argument
- * directly as static inlines. However for now it's probably not
- * worthwhile.
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_to_irq __gpio_to_irq
-
-/* Register the GPIOs */
-extern void ks8695_register_gpios(void);
-
#endif
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <asm/leds.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
static inline void ks8695_led_on(unsigned int led)
#
obj-y := timer.o irq.o common.o serial.o clock.o
-obj-y += gpiolib.o pm.o suspend.o
+obj-y += pm.o suspend.o
obj-y += phy3250.o
--- /dev/null
+/*
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_GPIO_LPC32XX_H
+#define __MACH_GPIO_LPC32XX_H
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+#endif /* __MACH_GPIO_LPC32XX_H */
-/*
- * arch/arm/mach-lpc32xx/include/mach/gpio.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-/*
- * Note!
- * Muxed GP pins need to be setup to the GP state in the board level
- * code prior to using this driver.
- * GPI pins : 28xP3 group
- * GPO pins : 24xP3 group
- * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
- */
-
-#define LPC32XX_GPIO_P0_MAX 8
-#define LPC32XX_GPIO_P1_MAX 24
-#define LPC32XX_GPIO_P2_MAX 13
-#define LPC32XX_GPIO_P3_MAX 6
-#define LPC32XX_GPI_P3_MAX 28
-#define LPC32XX_GPO_P3_MAX 24
-
-#define LPC32XX_GPIO_P0_GRP 0
-#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
-#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
-#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
-#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
-#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
-
-/*
- * A specific GPIO can be selected with this macro
- * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
- * See the LPC32x0 User's guide for GPIO group numbers
- */
-#define LPC32XX_GPIO(x, y) ((x) + (y))
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
-#endif
#include <mach/hardware.h>
#include <mach/platform.h>
+#include <mach/gpio-lpc32xx.h>
#include "common.h"
/*
Say 'Y' here if you want to support the Marvell PXA168-based
Teton BGA Development Board.
-config MACH_SHEEVAD
+config MACH_GPLUGD
bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
select CPU_PXA168
help
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
-obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o
+obj-$(CONFIG_MACH_GPLUGD) += gplugd.o
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-pxa168.h>
#include <mach/pxa168.h>
-#include <mach/gpio.h>
#include <video/pxa168fb.h>
#include <linux/input.h>
#include <plat/pxa27x_keypad.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/regulator/fixed.h>
#define APBC_CLK(_name, _reg, _fnclksel, _rate) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APBC_##_reg, \
+ .clk_rst = APBC_##_reg, \
.fnclksel = _fnclksel, \
.rate = _rate, \
.ops = &apbc_clk_ops, \
#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APBC_##_reg, \
+ .clk_rst = APBC_##_reg, \
.fnclksel = _fnclksel, \
.rate = _rate, \
.ops = _ops, \
#define APMU_CLK(_name, _reg, _eval, _rate) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APMU_##_reg, \
+ .clk_rst = APMU_##_reg, \
.enable_val = _eval, \
.rate = _rate, \
.ops = &apmu_clk_ops, \
#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APMU_##_reg, \
+ .clk_rst = APMU_##_reg, \
.enable_val = _eval, \
.rate = _rate, \
.ops = _ops, \
static struct map_desc standard_io_desc[] __initdata = {
{
.pfn = __phys_to_pfn(APB_PHYS_BASE),
- .virtual = APB_VIRT_BASE,
+ .virtual = (unsigned long)APB_VIRT_BASE,
.length = APB_PHYS_SIZE,
.type = MT_DEVICE,
}, {
.pfn = __phys_to_pfn(AXI_PHYS_BASE),
- .virtual = AXI_VIRT_BASE,
+ .virtual = (unsigned long)AXI_VIRT_BASE,
.length = AXI_PHYS_SIZE,
.type = MT_DEVICE,
},
*/
#include <linux/init.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/gpio.h>
#include <mach/pxa168.h>
#include <mach/mfp-pxa168.h>
pxa168_add_eth(&gplugd_eth_platform_data);
}
-MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform")
+MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
.map_io = mmp_map_io,
.nr_irqs = IRQ_BOARD_START,
.init_irq = pxa168_init_irq,
#ifndef __ASM_MACH_ADDR_MAP_H
#define __ASM_MACH_ADDR_MAP_H
+#ifndef __ASSEMBLER__
+#define IOMEM(x) ((void __iomem *)(x))
+#else
+#define IOMEM(x) (x)
+#endif
+
/* APB - Application Subsystem Peripheral Bus
*
* NOTE: the DMA controller registers are actually on the AXI fabric #1
* peripherals on APB, let's count it into the ABP mapping area.
*/
#define APB_PHYS_BASE 0xd4000000
-#define APB_VIRT_BASE 0xfe000000
+#define APB_VIRT_BASE IOMEM(0xfe000000)
#define APB_PHYS_SIZE 0x00200000
#define AXI_PHYS_BASE 0xd4200000
-#define AXI_VIRT_BASE 0xfe200000
+#define AXI_VIRT_BASE IOMEM(0xfe200000)
#define AXI_PHYS_SIZE 0x00200000
/* Static Memory Controller - Chip Select 0 and 1 */
--- /dev/null
+#ifndef __ASM_MACH_GPIO_PXA_H
+#define __ASM_MACH_GPIO_PXA_H
+
+#include <mach/addr-map.h>
+#include <mach/irqs.h>
+
+#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
+
+#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+/* NOTE: these macros are defined here to make optimization of
+ * gpio_{get,set}_value() to work when 'gpio' is a constant.
+ * Usage of these macros otherwise is no longer recommended,
+ * use generic GPIO API whenever possible.
+ */
+#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
+
+#include <plat/gpio-pxa.h>
+
+#endif /* __ASM_MACH_GPIO_PXA_H */
#ifndef __ASM_MACH_GPIO_H
#define __ASM_MACH_GPIO_H
-#include <mach/addr-map.h>
-#include <mach/irqs.h>
#include <asm-generic/gpio.h>
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
-
-#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
-
#define __gpio_is_inverted(gpio) (0)
#define __gpio_is_occupied(gpio) (0)
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
#include <plat/gpio.h>
#endif /* __ASM_MACH_GPIO_H */
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/mfd/max8925.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
void mmp2_clear_pmic_int(void)
{
- unsigned long mfpr_pmic, data;
+ void __iomem *mfpr_pmic;
+ unsigned long data;
mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
data = __raw_readl(mfpr_pmic);
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
-#include <mach/gpio.h>
#include "common.h"
* GNU General Public License for more details.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <mach/vreg.h>
#include <mach/mpp.h>
-#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/memory.h>
#include <asm/setup.h>
-#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <mach/board.h>
#include <mach/irqs.h>
#include <mach/sirc.h>
-#include <mach/gpio.h>
#include <mach/vreg.h>
#include <mach/mmc.h>
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
/* linux/arch/arm/mach-msm/board-trout-mmc.c
** Author: Brian Swetland <swetland@google.com>
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/debugfs.h>
-#include <asm/gpio.h>
#include <asm/io.h>
#include <mach/vreg.h>
/* linux/arch/arm/mach-msm/board-trout-mddi.c
** Author: Brian Swetland <swetland@google.com>
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <asm/io.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <mach/msm_fb.h>
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __ASM_ARCH_MSM_GPIO_H
-#define __ASM_ARCH_MSM_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __ASM_ARCH_MSM_GPIO_H */
+/* empty */
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/irq.h>
-#include <asm/gpio.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <plat/mpp.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include "common.h"
#include "mpp.h"
static struct clk *gpc_dvfs_clk;
+static int mx5_suspend_prepare(void)
+{
+ return clk_enable(gpc_dvfs_clk);
+}
+
static int mx5_suspend_enter(suspend_state_t state)
{
- clk_enable(gpc_dvfs_clk);
switch (state) {
case PM_SUSPEND_MEM:
mx5_cpu_lp_set(STOP_POWER_OFF);
__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
- clk_disable(gpc_dvfs_clk);
-
return 0;
}
+static void mx5_suspend_finish(void)
+{
+ clk_disable(gpc_dvfs_clk);
+}
+
static int mx5_pm_valid(suspend_state_t state)
{
return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
static const struct platform_suspend_ops mx5_suspend_ops = {
.valid = mx5_pm_valid,
+ .prepare = mx5_suspend_prepare,
.enter = mx5_suspend_enter,
+ .finish = mx5_suspend_finish,
};
static int __init mx5_pm_init(void)
\
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \
- reg |= frac; \
+ reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC; \
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
} \
\
#ifndef __MACH_MXS_GPIO_H__
#define __MACH_MXS_GPIO_H__
-#include <asm-generic/gpio.h>
-
#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
-/* use gpiolib dispatchers */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
#define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START)
#endif /* __MACH_MXS_GPIO_H__ */
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+#include <plat/gpio-nomadik.h>
#include <plat/mtu.h>
#include <mach/setup.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/map.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
-#include <linux/gpio.h>
#include <linux/platform_device.h>
+#include <plat/gpio-nomadik.h>
/*
* There are two busses in the 8815NHK.
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
-#include <plat/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
#include <plat/io.h>
#include <plat/board-ams-delta.h>
-#include <mach/gpio.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/usb.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/flash.h>
#include <plat/fpga.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include "board-h2.h"
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include "board-h3.h"
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/major.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
* 02110-1301, USA.
*
*/
-
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <plat/mux.h>
#include <plat/flash.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mutex.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/map.h>
#include <plat/led.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/flash.h>
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include <plat/board-sx1.h>
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/dma.h>
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <plat/board-voiceblue.h>
#include <plat/common.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
*/
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
-#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <asm/mach/irq.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
static void fpga_mask_irq(struct irq_data *d)
{
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
#include <plat/cpu.h>
#define IRQ_BANK(irq) ((irq) >> 5)
* The "surfer" expansion board and H2 sample board also have two-color
* green+red LEDs (in parallel), used here for timer and idle indicators.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
#include "leds.h"
*
* LED driver for OSK with optional Mistral QVGA board
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/gpio.h>
-
#include "leds.h"
*
* OMAP LEDs dispatcher
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include "leds.h"
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <plat/board.h>
#include <plat/mux.h>
-#include <mach/gpio.h>
#include <plat/fpga.h>
#include "pm.h"
{
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
- omap2_pmic_init("twl4030", &sdp2430_twldata);
+ omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+ &sdp2430_twldata);
return 0;
}
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
-static struct omap_device_pad keypad_pads[] __initdata = {
+static struct omap_device_pad keypad_pads[] = {
{ .name = "kpd_col1.kpd_col1",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <mach/gpio.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
.name = "gpt12_fck",
.ops = &clkops_null,
.parent = &secure_32k_fck,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
.name = "wdt1_fck",
.ops = &clkops_null,
.parent = &secure_32k_fck,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
} else if (cpu_is_omap446x()) {
cpu_mask = RATE_IN_4460;
cpu_clkflg = CK_446X;
+ } else {
+ return 0;
}
clk_init(&omap2_clk_functions);
- omap2_clk_disable_clkdm_control();
+
+ /*
+ * Must stay commented until all OMAP SoC drivers are
+ * converted to runtime PM, or drivers may start crashing
+ *
+ * omap2_clk_disable_clkdm_control();
+ */
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++)
spin_lock_irqsave(&clkdm->lock, flags);
clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
ret = arch_clkdm->clkdm_wakeup(clkdm);
+ ret |= pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
return ret;
}
spin_lock_irqsave(&clkdm->lock, flags);
clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
arch_clkdm->clkdm_deny_idle(clkdm);
+ pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
}
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mcbsp.h>
-#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
*/
reg = omap4_ctrl_pad_readl(control_pbias_offset);
reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
- OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ OMAP4_MMC1_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
else
reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK;
reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
- OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ OMAP4_MMC1_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
timeout = jiffies + msecs_to_jiffies(5);
if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
pr_err("Pbias Voltage is not same as LDO\n");
/* Caution : On VMODE_ERROR Power Down MMC IO */
- reg &= ~(OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ reg &= ~(OMAP4_MMC1_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
} else {
reg = omap4_ctrl_pad_readl(control_pbias_offset);
reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_MMC1_PBIASLITE_VMODE_MASK |
- OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+ OMAP4_MMC1_PBIASLITE_VMODE_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
}
omap_irq_bank_init_one(bank);
- for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20)
- omap_alloc_gc(bank->base_reg + j, i, 32);
+ for (j = 0; j < bank->nr_irqs; j += 32)
+ omap_alloc_gc(bank->base_reg + j, j, 32);
nr_of_irqs += bank->nr_irqs;
nr_banks++;
.pa_end = OMAP243X_HS_BASE + SZ_4K - 1,
.flags = ADDR_TYPE_RT
},
+ { }
};
/* l4_core ->usbhsotg interface */
} else {
hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
- pwrdm_wait_transition(pwrdm);
sleep_switch = FORCEWAKEUP_SWITCH;
}
}
return ret;
}
- pwrdm_wait_transition(pwrdm);
pwrdm_state_switch(pwrdm);
err:
return ret;
/**
* pwrdm_init - set up the powerdomain layer
- * @pwrdm_list: array of struct powerdomain pointers to register
+ * @pwrdms: array of struct powerdomain pointers to register
* @custom_funcs: func pointers for arch specific implementations
*
- * Loop through the array of powerdomains @pwrdm_list, registering all
- * that are available on the current CPU. If pwrdm_list is supplied
- * and not null, all of the referenced powerdomains will be
- * registered. No return value. XXX pwrdm_list is not really a
- * "list"; it is an array. Rename appropriately.
+ * Loop through the array of powerdomains @pwrdms, registering all
+ * that are available on the current CPU. Also, program all
+ * powerdomain target state as ON; this is to prevent domains from
+ * hitting low power states (if bootloader has target states set to
+ * something other than ON) and potentially even losing context while
+ * PM is not fully initialized. The PM late init code can then program
+ * the desired target state for all the power domains. No return
+ * value.
*/
-void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs)
+void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs)
{
struct powerdomain **p = NULL;
+ struct powerdomain *temp_p;
if (!custom_funcs)
WARN(1, "powerdomain: No custom pwrdm functions registered\n");
else
arch_pwrdm = custom_funcs;
- if (pwrdm_list) {
- for (p = pwrdm_list; *p; p++)
+ if (pwrdms) {
+ for (p = pwrdms; *p; p++)
_pwrdm_register(*p);
}
+
+ list_for_each_entry(temp_p, &pwrdm_list, node)
+ pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON);
}
/**
musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus;
- if (cpu_is_omap44xx())
- omap4430_phy_init(dev);
-
if (cpu_is_omap3517() || cpu_is_omap3505()) {
oh_name = "am35x_otg_hs";
name = "musb-am35x";
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
* License, or (at your option) any later version.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/phy.h>
#include <linux/marvell_phy.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
/*
* Check for devices with hard-wired IRQs.
*/
- irq = orion5x_pci_map_irq(const dev, slot, pin);
+ irq = orion5x_pci_map_irq(dev, slot, pin);
if (irq != -1)
return irq;
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_reg.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
#include "common.h"
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/mbus.h>
+#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/serial_reg.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_reg.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/serial_reg.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pnx4008.h>
/* register definitions */
#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE)
/*
- * arch/arm/mach-pnx4008/include/mach/gpio.h
+ * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
*
* PNX4008 GPIO driver - header file
*
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/io.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pnx4008.h>
#include <mach/clock.h>
#define UART_3 0
static struct of_device_id clkc_ids[] = {
{ .compatible = "sirf,prima2-clkc" },
+ {},
};
void __init sirfsoc_of_clk_init(void)
static struct of_device_id intc_ids[] = {
{ .compatible = "sirf,prima2-intc" },
+ {},
};
void __init sirfsoc_of_irq_init(void)
static struct of_device_id rstc_ids[] = {
{ .compatible = "sirf,prima2-rstc" },
+ {},
};
static int __init sirfsoc_of_rstc_init(void)
static struct of_device_id timer_ids[] = {
{ .compatible = "sirf,prima2-tick" },
+ {},
};
static void __init sirfsoc_of_timer_map(void)
menu "Intel PXA2xx/PXA3xx Implementations"
+config ARCH_PXA_V7
+ bool "ARMv7 (PXA95x) based systems"
+
+if ARCH_PXA_V7
+comment "Marvell Dev Platforms (sorted by hardware release time)"
+config MACH_TAVOREVB3
+ bool "PXA95x Development Platform (aka TavorEVB III)"
+ select CPU_PXA955
+
+config MACH_SAARB
+ bool "PXA955 Handheld Platform (aka SAARB)"
+ select CPU_PXA955
+endif
+
+config PXA_V7_MACH_AUTO
+ def_bool y
+ depends on ARCH_PXA_V7
+ depends on !MACH_SAARB
+ select MACH_TAVOREVB3
+
+if !ARCH_PXA_V7
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config ARCH_LUBBOCK
select PXA3xx
select CPU_PXA930
-config MACH_TAVOREVB3
- bool "PXA95x Development Platform (aka TavorEVB III)"
- select CPU_PXA950
-
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select CPU_PXA930
-config MACH_SAARB
- bool "PXA955 Handheld Platform (aka SAARB)"
- select CPU_PXA955
-
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_PXA_IDP
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
+ select MACH_PALM27X
select PXA27x
select IWMMXT
select PALM_TREO
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
+ select MACH_PALM27X
select PXA27x
select IWMMXT
select PALM_TREO
bool "Raumfeld Controller"
select PXA3xx
select CPU_PXA300
+ select POWER_SUPPLY
select HAVE_PWM
config MACH_RAUMFELD_CONNECTOR
bool "Raumfeld Connector"
+ select POWER_SUPPLY
select PXA3xx
select CPU_PXA300
config MACH_RAUMFELD_SPEAKER
bool "Raumfeld Speaker"
+ select POWER_SUPPLY
select PXA3xx
select CPU_PXA300
bool "Zipit Z2 Handheld"
select PXA27x
select HAVE_PWM
-
+endif
endmenu
config PXA25x
config SHARPSL_PM_MAX1111
bool
select HWMON
+ select SPI
+ select SPI_MASTER
select SENSORS_MAX1111
config PXA_HAVE_ISA_IRQS
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
-obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o
+obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
BALLOON3_NAND_CONTROL_REG);
if (balloon3_ctl_set)
__raw_writel(balloon3_ctl_set,
- BALLOON3_NAND_CONTROL_REG |
+ BALLOON3_NAND_CONTROL_REG +
BALLOON3_FPGA_SETnCLR);
}
__raw_writew(
BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
- BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
+ BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
/* Deassert correct nCE line */
__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
int ret;
__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
- BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR);
+ BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
ver = __raw_readw(BALLOON3_FPGA_VER);
if (ver < 0x4f08)
BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
BALLOON3_NAND_CONTROL_FLWP,
- BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
+ BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
return 0;
err2:
static struct map_desc balloon3_io_desc[] __initdata = {
{ /* CPLD/FPGA */
- .virtual = BALLOON3_FPGA_VIRT,
+ .virtual = (unsigned long)BALLOON3_FPGA_VIRT,
.pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS),
.length = BALLOON3_FPGA_LENGTH,
.type = MT_DEVICE,
#include <linux/platform_device.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand-gpio.h>
#include <asm/hardware/it8152.h>
-unsigned long it8152_base_address;
+void __iomem *it8152_base_address;
static int cmx2xx_it8152_irq_gpio;
static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
#define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40)
/* virtual addresses for statically mapped regions */
-#define CMX2XX_VIRT_BASE (0xe8000000)
+#define CMX2XX_VIRT_BASE (void __iomem *)(0xe8000000)
#define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE)
/* physical address if local-bus attached devices */
/* Map PCI companion statically */
static struct map_desc cmx2xx_io_desc[] __initdata = {
[0] = { /* PCI bridge */
- .virtual = CMX2XX_IT8152_VIRT,
+ .virtual = (unsigned long)CMX2XX_IT8152_VIRT,
.pfn = __phys_to_pfn(PXA_CS4_PHYS),
.length = SZ_64M,
.type = MT_DEVICE
static void __init cm_x300_init_wi2wi(void)
{
- int bt_reset, wlan_en;
int err;
if (system_rev < 130) {
}
udelay(10);
- gpio_set_value(bt_reset, 0);
+ gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
udelay(10);
- gpio_set_value(bt_reset, 1);
+ gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
- gpio_free(wlan_en);
- gpio_free(bt_reset);
+ gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
}
/* MFP */
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/mach-types.h>
#include <mach/reset.h>
-#include <mach/gpio.h>
#include <mach/smemc.h>
#include <mach/pxa3xx-regs.h>
* Peripheral Bus
*/
#define PERIPH_PHYS 0x40000000
-#define PERIPH_VIRT 0xf2000000
+#define PERIPH_VIRT IOMEM(0xf2000000)
#define PERIPH_SIZE 0x02000000
/*
*/
#define PXA2XX_SMEMC_PHYS 0x48000000
#define PXA3XX_SMEMC_PHYS 0x4a000000
-#define SMEMC_VIRT 0xf6000000
+#define SMEMC_VIRT IOMEM(0xf6000000)
#define SMEMC_SIZE 0x00100000
/*
* Dynamic Memory Controller (only on PXA3xx)
*/
#define DMEMC_PHYS 0x48100000
-#define DMEMC_VIRT 0xf6100000
+#define DMEMC_VIRT IOMEM(0xf6100000)
#define DMEMC_SIZE 0x00100000
/*
* Internal Memory Controller (PXA27x and later)
*/
#define IMEMC_PHYS 0x58000000
-#define IMEMC_VIRT 0xfe000000
+#define IMEMC_VIRT IOMEM(0xfe000000)
#define IMEMC_SIZE 0x00100000
#endif /* __ASM_MACH_ADDR_MAP_H */
};
#define BALLOON3_FPGA_PHYS PXA_CS4_PHYS
-#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
+#define BALLOON3_FPGA_VIRT IOMEM(0xf1000000) /* as per balloon2 */
#define BALLOON3_FPGA_LENGTH 0x01000000
#define BALLOON3_FPGA_SETnCLR (0x1000)
--- /dev/null
+/*
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __MACH_PXA_GPIO_PXA_H
+#define __MACH_PXA_GPIO_PXA_H
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+
+#define GPIO_REGS_VIRT io_p2v(0x40E00000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
+
+/* GPIO Pin Level Registers */
+#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L GPIO_REG(0x0054)
+#define GAFR0_U GPIO_REG(0x0058)
+#define GAFR1_L GPIO_REG(0x005C)
+#define GAFR1_U GPIO_REG(0x0060)
+#define GAFR2_L GPIO_REG(0x0064)
+#define GAFR2_U GPIO_REG(0x0068)
+#define GAFR3_L GPIO_REG(0x006C)
+#define GAFR3_U GPIO_REG(0x0070)
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
+
+#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
+{
+ return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+ int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+ int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ return af != 1 || dir == 0;
+ else
+ return af != 0 || dir != 0;
+ } else
+ return GPDR(gpio) & GPIO_bit(gpio);
+}
+
+#include <plat/gpio-pxa.h>
+#endif /* __MACH_PXA_GPIO_PXA_H */
#ifndef __ASM_ARCH_PXA_GPIO_H
#define __ASM_ARCH_PXA_GPIO_H
-#include <mach/irqs.h>
-#include <mach/hardware.h>
#include <asm-generic/gpio.h>
+/* The defines for the driver are needed for the accelerated accessors */
+#include "gpio-pxa.h"
-#define GPIO_REGS_VIRT io_p2v(0x40E00000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-/* GPIO Pin Level Registers */
-#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
-#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
-#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
-#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
-
-/* GPIO Pin Direction Registers */
-#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
-#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
-#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
-#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
-
-/* GPIO Pin Output Set Registers */
-#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
-#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
-#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
-#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
-
-/* GPIO Pin Output Clear Registers */
-#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
-#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
-#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
-#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
-
-/* GPIO Rising Edge Detect Registers */
-#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
-#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
-#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
-#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
-
-/* GPIO Falling Edge Detect Registers */
-#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
-#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
-#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
-#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
-
-/* GPIO Edge Detect Status Registers */
-#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
-#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
-#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
-#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
-
-/* GPIO Alternate Function Select Registers */
-#define GAFR0_L GPIO_REG(0x0054)
-#define GAFR0_U GPIO_REG(0x0058)
-#define GAFR1_L GPIO_REG(0x005C)
-#define GAFR1_U GPIO_REG(0x0060)
-#define GAFR2_L GPIO_REG(0x0064)
-#define GAFR2_U GPIO_REG(0x0068)
-#define GAFR3_L GPIO_REG(0x006C)
-#define GAFR3_U GPIO_REG(0x0070)
-
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
-#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
-#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
-#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
-#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-
-
-#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
static inline int irq_to_gpio(unsigned int irq)
return -1;
}
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static inline int __gpio_is_inverted(unsigned gpio)
-{
- return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
-#endif
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static inline int __gpio_is_occupied(unsigned gpio)
-{
- if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
- int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
- int dir = GPDR(gpio) & GPIO_bit(gpio);
-
- if (__gpio_is_inverted(gpio))
- return af != 1 || dir == 0;
- else
- return af != 0 || dir != 0;
- } else
- return GPDR(gpio) & GPIO_bit(gpio);
-}
-
#include <plat/gpio.h>
#endif
* Note that not all PXA2xx chips implement all those addresses, and the
* kernel only maps the minimum needed range of this mapping.
*/
-#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
#ifndef __ASSEMBLY__
-
-# define __REG(x) (*((volatile u32 *)io_p2v(x)))
+# define IOMEM(x) ((void __iomem *)(x))
+# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x)))
/* With indexed regs we don't want to feed the index through io_p2v()
especially if it is a variable, otherwise horrible code will result. */
# define __REG2(x,y) \
- (*(volatile u32 *)((u32)&__REG(x) + (y)))
+ (*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
# define __PREG(x) (io_v2p((u32)&(x)))
#else
+# define IOMEM(x) x
# define __REG(x) io_p2v(x)
# define __PREG(x) io_v2p(x)
#ifndef __ASM_ARCH_LITTLETON_H
#define __ASM_ARCH_LITTLETON_H
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#define LITTLETON_ETH_PHYS 0x30000000
#define __ASM_ARCH_LPD270_H
#define LPD270_CPLD_PHYS PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT 0xf0000000
+#define LPD270_CPLD_VIRT IOMEM(0xf0000000)
#define LPD270_CPLD_SIZE 0x00100000
#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000)
/* CPLD registers */
-#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x)))
+#define LPD270_CPLD_REG(x) (LPD270_CPLD_VIRT + (x))
#define LPD270_CONTROL LPD270_CPLD_REG(0x00)
#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04)
#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08)
#define __ARCH_PXA_MTD_XIP_H__
#include <mach/regs-ost.h>
-#include <mach/regs-intc.h>
#define xip_irqpending() (ICIP & ICMR)
extern void __init palm27x_lcd_init(int power,
struct pxafb_mode_info *mode);
#else
-static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
+#define palm27x_lcd_init(power, mode) do {} while (0)
#endif
#if defined(CONFIG_USB_GADGET_PXA27X) || \
/* Various addresses */
#define PALMTX_PCMCIA_PHYS 0x28000000
-#define PALMTX_PCMCIA_VIRT 0xf0000000
+#define PALMTX_PCMCIA_VIRT IOMEM(0xf0000000)
#define PALMTX_PCMCIA_SIZE 0x100000
#define PALMTX_PHYS_RAM_START 0xa0000000
#define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24))
#define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25))
-#define PALMTX_NAND_ALE_VIRT 0xff100000
-#define PALMTX_NAND_CLE_VIRT 0xff200000
+#define PALMTX_NAND_ALE_VIRT IOMEM(0xff100000)
+#define PALMTX_NAND_CLE_VIRT IOMEM(0xff200000)
/* TOUCHSCREEN */
#define AC97_LINK_FRAME 21
#ifndef __MACH_PXA27x_H
#define __MACH_PXA27x_H
+#include <linux/suspend.h>
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
extern void __init pxa27x_map_io(void);
extern void __init pxa27x_init_irq(void);
extern int __init pxa27x_set_pwrmode(unsigned int mode);
+extern void pxa27x_cpu_pm_enter(suspend_state_t state);
#define pxa27x_handle_irq ichp_handle_irq
--- /dev/null
+#ifndef __MACH_PXA95X_H
+#define __MACH_PXA95X_H
+
+#include <mach/pxa3xx.h>
+#include <mach/mfp-pxa930.h>
+
+#endif /* __MACH_PXA95X_H */
void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
unsigned long pxafb_get_hsync_time(struct device *dev);
+#ifdef CONFIG_FB_PXA_SMARTPANEL
extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
extern int pxafb_smart_flush(struct fb_info *info);
+#else
+static inline int pxafb_smart_queue(struct fb_info *info,
+ uint16_t *cmds, int n)
+{
+ return 0;
+}
+
+static inline int pxafb_smart_flush(struct fb_info *info)
+{
+ return 0;
+}
+#endif
#define PXA2XX_SMEMC_BASE 0x48000000
#define PXA3XX_SMEMC_BASE 0x4a000000
-#define SMEMC_VIRT 0xf6000000
+#define SMEMC_VIRT IOMEM(0xf6000000)
#define MDCNFG (SMEMC_VIRT + 0x00) /* SDRAM Configuration Register 0 */
#define MDREFR (SMEMC_VIRT + 0x04) /* SDRAM Refresh Control Register */
* Be gentle, and remap that over 32kB...
*/
-#define ZEUS_CPLD (0xf0000000)
+#define ZEUS_CPLD IOMEM(0xf0000000)
#define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000)
#define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000)
#define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000)
/* CPLD register bits */
#define ZEUS_CPLD_CONTROL_CF_RST 0x01
-#define ZEUS_PC104IO (0xf1000000)
+#define ZEUS_PC104IO IOMEM(0xf1000000)
#define ZEUS_SRAM_SIZE (256 * 1024)
extern int lcd_id;
extern int lcd_orientation;
-#ifdef CONFIG_CPU_PXA300
+#ifdef CONFIG_MACH_ZYLONITE300
extern void zylonite_pxa300_init(void);
#else
static inline void zylonite_pxa300_init(void)
}
#endif
-#ifdef CONFIG_CPU_PXA320
+#ifdef CONFIG_MACH_ZYLONITE320
extern void zylonite_pxa320_init(void);
#else
static inline void zylonite_pxa320_init(void)
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include "generic.h"
-#define IRQ_BASE (void __iomem *)io_p2v(0x40d00000)
+#define IRQ_BASE io_p2v(0x40d00000)
#define ICIP (0x000)
#define ICMR (0x004)
0x40d00130,
};
- return (void __iomem *)io_p2v(phys_base[i]);
+ return io_p2v(phys_base[i]);
}
void pxa_mask_irq(struct irq_data *d)
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/gpio.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
static struct map_desc lpd270_io_desc[] __initdata = {
{
- .virtual = LPD270_CPLD_VIRT,
+ .virtual = (unsigned long)LPD270_CPLD_VIRT,
.pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
.length = LPD270_CPLD_SIZE,
.type = MT_DEVICE,
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/hardware/sa1111.h>
#include <mach/pxa25x.h>
-#include <mach/gpio.h>
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/gpio.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/syscore_ops.h>
-#include <mach/gpio.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
+#include <mach/gpio-pxa.h>
#include "generic.h"
palmtreo_leds_init();
}
+#ifdef CONFIG_MACH_TREO680
static void __init treo680_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
GPIO_NR_TREO680_SD_POWER, 0);
}
+#endif
+#ifdef CONFIG_MACH_CENTRO
static void __init centro_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
GPIO_NR_CENTRO_SD_POWER, 1);
}
+#endif
+#ifdef CONFIG_MACH_TREO680
MACHINE_START(TREO680, "Palm Treo 680")
.atag_offset = 0x100,
.map_io = pxa27x_map_io,
.timer = &pxa_timer,
.init_machine = treo680_init,
MACHINE_END
+#endif
+#ifdef CONFIG_MACH_CENTRO
MACHINE_START(CENTRO, "Palm Centro 685")
.atag_offset = 0x100,
.map_io = pxa27x_map_io,
.timer = &pxa_timer,
.init_machine = centro_init,
MACHINE_END
+#endif
unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+ char __iomem *nandaddr = this->IO_ADDR_W;
if (cmd == NAND_CMD_NONE)
return;
******************************************************************************/
static struct map_desc palmtx_io_desc[] __initdata = {
{
- .virtual = PALMTX_PCMCIA_VIRT,
+ .virtual = (unsigned long)PALMTX_PCMCIA_VIRT,
.pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
.length = PALMTX_PCMCIA_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = PALMTX_NAND_ALE_VIRT,
+ .virtual = (unsigned long)PALMTX_NAND_ALE_VIRT,
.pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
- .virtual = PALMTX_NAND_CLE_VIRT,
+ .virtual = (unsigned long)PALMTX_NAND_CLE_VIRT,
.pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
.length = SZ_1M,
.type = MT_DEVICE,
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <media/soc_camera.h>
-#include <asm/gpio.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/pm.h>
static struct map_desc pxa25x_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = SMEMC_VIRT,
+ .virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/suspend.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/pxa27x.h>
#include <mach/reset.h>
#include <mach/ohci.h>
static struct map_desc pxa27x_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = SMEMC_VIRT,
+ .virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
return err;
}
+EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc);
void pxa3xx_u2d_stop_hc(struct usb_bus *host)
{
clk_disable(u2d->clk);
}
+EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
static int pxa3xx_u2d_probe(struct platform_device *pdev)
{
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
static struct map_desc pxa3xx_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = SMEMC_VIRT,
+ .virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/pxa930.h>
#include <mach/reset.h>
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/mfp.h>
#include <mach/mfp-pxa930.h>
-#include <mach/gpio.h>
+#include <mach/pxa95x.h>
#include "generic.h"
*/
PSPR = 0x0;
local_irq_disable();
- pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PHYS_OFFSET - PAGE_OFFSET);
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+ pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
}
#else
#define z2_power_off NULL
static struct map_desc zeus_io_desc[] __initdata = {
{
- .virtual = ZEUS_CPLD_VERSION,
+ .virtual = (unsigned long)ZEUS_CPLD_VERSION,
.pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
- .virtual = ZEUS_CPLD_ISA_IRQ,
+ .virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ,
.pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
- .virtual = ZEUS_CPLD_CONTROL,
+ .virtual = (unsigned long)ZEUS_CPLD_CONTROL,
.pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
- .virtual = ZEUS_PC104IO,
+ .virtual = (unsigned long)ZEUS_PC104IO,
.pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS),
.length = 0x00800000,
.type = MT_DEVICE,
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
*/
if (realview_reset)
realview_reset(mode);
+ dsb();
}
#endif
* published by the Free Software Foundation.
*/
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* some boards require extra gpio capacity to support external
* devices that need GPIO.
*/
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#endif
-#include <asm-generic/gpio.h>
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
#ifndef __ASM_ARCH_H1940_LATCH_H
#define __ASM_ARCH_H1940_LATCH_H
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x))
unsigned long clkcon0;
clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+ clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
__raw_writel(clkcon0, S3C2443_CLKDIV0);
}
* published by the Free Software Foundation.
*/
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S3C64XX_GPIO_A_NR (8)
#define S3C64XX_GPIO_B_NR (7)
#define BOARD_NR_GPIOS 16
#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS)
-
-#include <asm-generic/gpio.h>
.cols = 8,
};
-static int smdk6410_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(S3C64XX_GPF(15), "Backlight");
- if (ret) {
- printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
- return ret;
- }
-
- /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */
- s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
- return 0;
-}
-
-static void smdk6410_backlight_exit(struct device *dev)
-{
- s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT);
- gpio_free(S3C64XX_GPF(15));
-}
-
-static struct platform_pwm_backlight_data smdk6410_backlight_data = {
- .pwm_id = 1,
- .max_brightness = 255,
- .dft_brightness = 255,
- .pwm_period_ns = 78770,
- .init = smdk6410_backlight_init,
- .exit = smdk6410_backlight_exit,
-};
-
-static struct platform_device smdk6410_backlight_device = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &s3c_device_timer[1].dev,
- .platform_data = &smdk6410_backlight_data,
- },
-};
-
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
#include <linux/suspend.h>
#include <linux/serial_core.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <mach/map.h>
#include <mach/irqs.h>
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S5P6440_GPIO_A_NR (6)
#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
}
ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S5PC100_GPIO_A0_NR (8)
#define S5PC100_GPIO_A1_NR (5)
/* define the number of gpios we need to the one after the MP04() range */
#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "s5pv210-fimc.0",
+ .name = "sclk_cam0",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 3),
},
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "s5pv210-fimc.1",
+ .name = "sclk_cam1",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 4),
},
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* Practically, GPIO banks up to MP03 are the configurable gpio banks */
/* GPIO bank sizes */
#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
SAVE_ITEM(S3C2410_TCNTO(0)),
};
-void s5pv210_cpu_suspend(unsigned long arg)
+static int s5pv210_cpu_suspend(unsigned long arg)
{
unsigned long tmp;
#
# Common support
-obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o
+obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
-#include <asm/gpio.h>
#include "generic.h"
#include <asm/irq.h>
#include <asm-generic/gpio.h>
+#define __ARM_GPIOLIB_COMPLEX
+
static inline int gpio_get_value(unsigned gpio)
{
if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
#define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
(IRQ_GPIO11 - 11 + gpio))
-#define irq_to_gpio(irq) ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
- (irq - IRQ_GPIO11 + 11))
#endif
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
};
}
static struct sh_mobile_sdhi_info sh_sdhi1_info = {
- .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
.tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
.tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.set_pwr = ag5evm_sdhi1_set_pwr,
fsi_init_pm_clock();
sh7372_pm_init();
pm_clk_add(&fsi_device.dev, "spu2");
+ pm_clk_add(&lcdc1_device.dev, "hdmi");
}
static void __init ap4evb_timer_init(void)
},
.driver_param = {
.buswait_bwait = 4,
+ .d0_tx_id = SHDMA_SLAVE_USB0_TX,
+ .d1_rx_id = SHDMA_SLAVE_USB0_RX,
},
},
};
.buswait_bwait = 4,
.pipe_type = usbhs1_pipe_cfg,
.pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg),
+ .d0_tx_id = SHDMA_SLAVE_USB1_TX,
+ .d1_rx_id = SHDMA_SLAVE_USB1_RX,
},
},
};
hdmi_init_pm_clock();
sh7372_pm_init();
pm_clk_add(&fsi_device.dev, "spu2");
+ pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
}
static void __init mackerel_timer_init(void)
&sh7372_fsidivb_clk,
};
-enum { MSTP001,
+enum { MSTP001, MSTP000,
MSTP131, MSTP130,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
MSTP118, MSTP117, MSTP116, MSTP113,
MSTP106, MSTP101, MSTP100,
MSTP223,
- MSTP218, MSTP217, MSTP216,
- MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
- MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403,
+ MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207,
+ MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+ MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
+ MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406,
+ MSTP405, MSTP404, MSTP403, MSTP400,
MSTP_NR };
#define MSTP(_parent, _reg, _bit, _flags) \
static struct clk mstp_clks[MSTP_NR] = {
[MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
+ [MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */
[MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */
[MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */
[MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */
+ [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */
+ [MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */
[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+ [MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */
[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
- [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */
[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
[MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */
[MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */
[MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */
+ [MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */
[MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */
+ [MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */
+ [MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */
[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
+ [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */
};
static struct clk_lookup lookups[] = {
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+ CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */
CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */
CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */
+ CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */
+ CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
- CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */
+ CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */
CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */
+ CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */
+ CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+ CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */
+ CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1",
+ &div6_reparent_clks[DIV6_HDMI]),
CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
__raw_writel(0x108, SD2CKCR);
/* detect main clock parent */
- switch ((__raw_readl(CKSCR) >> 24) & 0x03) {
+ switch ((__raw_readl(CKSCR) >> 28) & 0x03) {
case 0:
main_clk.parent = &sh73a0_extal1_clk;
break;
#ifdef CONFIG_GPIOLIB
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned int irq)
{
return -ENOSYS;
}
+#else
+
+#define __ARM_GPIOLIB_COMPLEX
+
#endif /* CONFIG_GPIOLIB */
#endif /* __ASM_ARCH_GPIO_H */
SHDMA_SLAVE_SDHI2_TX,
SHDMA_SLAVE_MMCIF_RX,
SHDMA_SLAVE_MMCIF_TX,
+ SHDMA_SLAVE_USB0_TX,
+ SHDMA_SLAVE_USB0_RX,
+ SHDMA_SLAVE_USB1_TX,
+ SHDMA_SLAVE_USB1_RX,
};
extern struct clk sh7372_extal1_clk;
/* BBIF2 */
VPU,
TSIF1,
- _3DG_SGX530,
+ /* 3DG */
_2DDMAC,
IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
IPMMU_IPMMUR, IPMMU_IPMMUR2,
/* BBIF2 */
INTCS_VECT(VPU, 0x980),
INTCS_VECT(TSIF1, 0x9a0),
- INTCS_VECT(_3DG_SGX530, 0x9e0),
+ /* 3DG */
INTCS_VECT(_2DDMAC, 0xa00),
INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
{ 0, 0, MSIOF, 0,
- _3DG_SGX530, 0, 0, 0 } },
+ 0, 0, 0, 0 } },
{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
{ 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
0, 0, 0, 0 } },
TMU_TUNI2, TSIF1 } },
{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } },
{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } },
- { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } },
{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } },
{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } },
{ 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
};
/* CMT */
-static struct sh_timer_config cmt10_platform_data = {
- .name = "CMT10",
- .channel_offset = 0x10,
- .timer_bit = 0,
+static struct sh_timer_config cmt2_platform_data = {
+ .name = "CMT2",
+ .channel_offset = 0x40,
+ .timer_bit = 5,
.clockevent_rating = 125,
.clocksource_rating = 125,
};
-static struct resource cmt10_resources[] = {
+static struct resource cmt2_resources[] = {
[0] = {
- .name = "CMT10",
- .start = 0xe6138010,
- .end = 0xe613801b,
+ .name = "CMT2",
+ .start = 0xe6130040,
+ .end = 0xe613004b,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = evt2irq(0x0b00), /* CMT1_CMT10 */
+ .start = evt2irq(0x0b80), /* CMT2 */
.flags = IORESOURCE_IRQ,
},
};
-static struct platform_device cmt10_device = {
+static struct platform_device cmt2_device = {
.name = "sh_cmt",
- .id = 10,
+ .id = 2,
.dev = {
- .platform_data = &cmt10_platform_data,
+ .platform_data = &cmt2_platform_data,
},
- .resource = cmt10_resources,
- .num_resources = ARRAY_SIZE(cmt10_resources),
+ .resource = cmt2_resources,
+ .num_resources = ARRAY_SIZE(cmt2_resources),
};
/* TMU */
},
};
+/*
+ * USB-DMAC
+ */
+
+unsigned int usbts_shift[] = {3, 4, 5};
+
+enum {
+ XMIT_SZ_8BYTE = 0,
+ XMIT_SZ_16BYTE = 1,
+ XMIT_SZ_32BYTE = 2,
+};
+
+#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
+
+static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = {
+ {
+ .offset = 0,
+ }, {
+ .offset = 0x20,
+ },
+};
+
+/* USB DMAC0 */
+static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_USB0_TX,
+ .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0_RX,
+ .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ },
+};
+
+static struct sh_dmae_pdata usb_dma0_platform_data = {
+ .slave = sh7372_usb_dmae0_slaves,
+ .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves),
+ .channel = sh7372_usb_dmae_channels,
+ .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels),
+ .ts_low_shift = 6,
+ .ts_low_mask = 0xc0,
+ .ts_high_shift = 0,
+ .ts_high_mask = 0,
+ .ts_shift = usbts_shift,
+ .ts_shift_num = ARRAY_SIZE(usbts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chcr_offset = 0x14,
+ .chcr_ie_bit = 1 << 5,
+ .dmaor_is_32bit = 1,
+ .needs_tend_set = 1,
+ .no_dmars = 1,
+};
+
+static struct resource sh7372_usb_dmae0_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xe68a0020,
+ .end = 0xe68a0064 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* VCR/SWR/DMICR */
+ .start = 0xe68a0000,
+ .end = 0xe68a0014 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* IRQ for channels */
+ .start = evt2irq(0x0a00),
+ .end = evt2irq(0x0a00),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_dma0_device = {
+ .name = "sh-dma-engine",
+ .id = 3,
+ .resource = sh7372_usb_dmae0_resources,
+ .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources),
+ .dev = {
+ .platform_data = &usb_dma0_platform_data,
+ },
+};
+
+/* USB DMAC1 */
+static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_USB1_TX,
+ .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1_RX,
+ .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ },
+};
+
+static struct sh_dmae_pdata usb_dma1_platform_data = {
+ .slave = sh7372_usb_dmae1_slaves,
+ .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves),
+ .channel = sh7372_usb_dmae_channels,
+ .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels),
+ .ts_low_shift = 6,
+ .ts_low_mask = 0xc0,
+ .ts_high_shift = 0,
+ .ts_high_mask = 0,
+ .ts_shift = usbts_shift,
+ .ts_shift_num = ARRAY_SIZE(usbts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chcr_offset = 0x14,
+ .chcr_ie_bit = 1 << 5,
+ .dmaor_is_32bit = 1,
+ .needs_tend_set = 1,
+ .no_dmars = 1,
+};
+
+static struct resource sh7372_usb_dmae1_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xe68c0020,
+ .end = 0xe68c0064 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* VCR/SWR/DMICR */
+ .start = 0xe68c0000,
+ .end = 0xe68c0014 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* IRQ for channels */
+ .start = evt2irq(0x1d00),
+ .end = evt2irq(0x1d00),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_dma1_device = {
+ .name = "sh-dma-engine",
+ .id = 4,
+ .resource = sh7372_usb_dmae1_resources,
+ .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources),
+ .dev = {
+ .platform_data = &usb_dma1_platform_data,
+ },
+};
+
/* VPU */
static struct uio_info vpu_platform_data = {
.name = "VPU5HG",
&scif4_device,
&scif5_device,
&scif6_device,
- &cmt10_device,
+ &cmt2_device,
&tmu00_device,
&tmu01_device,
};
&dma0_device,
&dma1_device,
&dma2_device,
+ &usb_dma0_device,
+ &usb_dma1_device,
&vpu_device,
&veu0_device,
&veu1_device,
#include <mach/pinmux.h>
#include "board.h"
+#include "board-harmony.h"
#ifdef CONFIG_TEGRA_PCI
-/* GPIO 3 of the PMIC */
-#define EN_VDD_1V05_GPIO (TEGRA_NR_GPIOS + 2)
-
static int __init harmony_pcie_init(void)
{
struct regulator *regulator = NULL;
if (!machine_is_harmony())
return 0;
- err = gpio_request(EN_VDD_1V05_GPIO, "EN_VDD_1V05");
+ err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
if (err)
return err;
- gpio_direction_output(EN_VDD_1V05_GPIO, 1);
+ gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1);
regulator = regulator_get(NULL, "pex_clk");
if (IS_ERR_OR_NULL(regulator))
regulator_disable(regulator);
regulator_put(regulator);
err_reg:
- gpio_free(EN_VDD_1V05_GPIO);
+ gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO);
return err;
}
#ifndef _MACH_TEGRA_BOARD_HARMONY_H
#define _MACH_TEGRA_BOARD_HARMONY_H
+#include <mach/gpio-tegra.h>
+
#define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
#define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_))
#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2
#define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0
#define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1
+#define TEGRA_GPIO_EN_VDD_1V05_GPIO HARMONY_GPIO_TPS6586X(2)
void harmony_pinmux_init(void);
int harmony_regulator_init(void);
#ifndef _MACH_TEGRA_BOARD_PAZ00_H
#define _MACH_TEGRA_BOARD_PAZ00_H
+#include <mach/gpio-tegra.h>
+
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
#ifndef _MACH_TEGRA_BOARD_SEABOARD_H
#define _MACH_TEGRA_BOARD_SEABOARD_H
+#include <mach/gpio-tegra.h>
+
#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6
* GNU General Public License for more details.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <mach/pinmux.h>
-#include <mach/gpio.h>
#include "gpio-names.h"
#include "board-trimslice.h"
#ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H
#define _MACH_TEGRA_BOARD_TRIMSLICE_H
+#include <mach/gpio-tegra.h>
+
#define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */
#define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */
--- /dev/null
+/*
+ * arch/arm/mach-tegra/include/mach/gpio.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ * Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_GPIO_TEGRA_H
+#define __MACH_TEGRA_GPIO_TEGRA_H
+
+#include <linux/types.h>
+#include <mach/irqs.h>
+
+#define TEGRA_NR_GPIOS INT_GPIO_NR
+
+#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
+
+struct tegra_gpio_table {
+ int gpio; /* GPIO number */
+ bool enable; /* Enable for GPIO at init? */
+};
+
+void tegra_gpio_config(struct tegra_gpio_table *table, int num);
+void tegra_gpio_enable(int gpio);
+void tegra_gpio_disable(int gpio);
+
+#endif
-/*
- * arch/arm/mach-tegra/include/mach/gpio.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_GPIO_H
-#define __MACH_TEGRA_GPIO_H
-
-#include <linux/init.h>
-#include <mach/irqs.h>
-
-#define TEGRA_NR_GPIOS INT_GPIO_NR
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
-#define TEGRA_IRQ_TO_GPIO(irq) ((irq) - INT_GPIO_BASE)
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
- if (gpio < TEGRA_NR_GPIOS)
- return INT_GPIO_BASE + gpio;
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- if ((irq >= INT_GPIO_BASE) && (irq < INT_GPIO_BASE + INT_GPIO_NR))
- return irq - INT_GPIO_BASE;
- return -EINVAL;
-}
-
-struct tegra_gpio_table {
- int gpio; /* GPIO number */
- bool enable; /* Enable for GPIO at init? */
-};
-
-void tegra_gpio_config(struct tegra_gpio_table *table, int num);
-void tegra_gpio_enable(int gpio);
-void tegra_gpio_disable(int gpio);
-
-#endif
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
+#include <mach/gpio-tegra.h>
#include <mach/usb_phy.h>
#include <mach/iomap.h>
config MACH_U300
bool "U300"
+ select GPIO_U300
comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
#include <mach/hardware.h>
#include <mach/syscon.h>
#include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
#include "clock.h"
#include "mmc.h"
.end = IRQ_U300_GPIO_PORT2,
.flags = IORESOURCE_IRQ,
},
-#ifdef U300_COH901571_3
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
{
.name = "gpio3",
.start = IRQ_U300_GPIO_PORT3,
.end = IRQ_U300_GPIO_PORT4,
.flags = IORESOURCE_IRQ,
},
+#endif
#ifdef CONFIG_MACH_U300_BS335
{
.name = "gpio5",
.flags = IORESOURCE_IRQ,
},
#endif /* CONFIG_MACH_U300_BS335 */
-#endif /* U300_COH901571_3 */
};
static struct resource keypad_resources[] = {
.resource = i2c1_resources,
};
+/*
+ * The different variants have a few different versions of the
+ * GPIO block, with different number of ports.
+ */
+static struct u300_gpio_platform u300_gpio_plat = {
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+ .variant = U300_GPIO_COH901335,
+ .ports = 3,
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+ .variant = U300_GPIO_COH901571_3_BS335,
+ .ports = 7,
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+ .variant = U300_GPIO_COH901571_3_BS365,
+ .ports = 5,
+#endif
+ .gpio_base = 0,
+ .gpio_irq_base = IRQ_U300_GPIO_BASE,
+};
+
static struct platform_device gpio_device = {
.name = "u300-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(gpio_resources),
.resource = gpio_resources,
+ .dev = {
+ .platform_data = &u300_gpio_plat,
+ },
};
static struct platform_device keypad_device = {
BUG_ON(IS_ERR(clk));
clk_enable(clk);
- for (i = 0; i < NR_IRQS; i++)
+ for (i = 0; i < U300_VIC_IRQS_END; i++)
set_bit(i, (unsigned long *) &mask[0]);
vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
--- /dev/null
+/*
+ * Copyright (C) 2007-2011 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_U300_H
+#define __MACH_U300_GPIO_U300_H
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
+#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP 4
+#define U300_GPIO_PIN_CAM_REG_EN 5
+#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
+#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+ defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_UART_CTS 2
+#define U300_GPIO_PIN_UART_RTS 3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
+#endif
+
+#endif
+
+/**
+ * enum u300_gpio_variant - the type of U300 GPIO employed
+ */
+enum u300_gpio_variant {
+ U300_GPIO_COH901335,
+ U300_GPIO_COH901571_3_BS335,
+ U300_GPIO_COH901571_3_BS365,
+};
+
+/**
+ * struct u300_gpio_platform - U300 GPIO platform data
+ * @variant: IP block variant
+ * @ports: number of GPIO block ports
+ * @gpio_base: first GPIO number for this block (use a free range)
+ * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
+ */
+struct u300_gpio_platform {
+ enum u300_gpio_variant variant;
+ u8 ports;
+ int gpio_base;
+ int gpio_irq_base;
+};
+
+#endif /* __MACH_U300_GPIO_U300_H */
-/*
- *
- * arch/arm/mach-u300/include/mach/gpio.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_H
-#define __MACH_U300_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-/* Switch type depending on platform/chip variant */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_COH901335
-#endif
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
-#define U300_COH901571_3
-#endif
-
-/* Get base address for regs here */
-#include "u300-regs.h"
-/* IRQ numbers */
-#include "irqs.h"
-
-/*
- * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
- * used for anything, and often is. The event/enable etc figures are for
- * the lowermost pin (pin 0 on each port), shift this left to match your
- * pin if you're gonna use these values.
- */
-#ifdef U300_COH901335
-#define U300_GPIO_PORTX_SPACING (0x1C)
-/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
-#define U300_GPIO_PXPDIR (0x00)
-#define U300_GPIO_PXPDOR (0x00)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x04)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x08)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x0C)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x10)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x14)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x18)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Control Register 32bit (R/W) */
-#define U300_GPIO_CR (0x54)
-#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
-/* three ports of 8 bits each = GPIO pins 0..23 */
-#define U300_GPIO_NUM_PORTS 3
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-#ifdef U300_COH901571_3
-/*
- * Control Register 32bit (R/W)
- * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
- * gives the number of GPIO pins.
- * bit 8-2 (mask 0x000001FC) contains the core version ID.
- */
-#define U300_GPIO_CR (0x00)
-#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
-#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
-#define U300_GPIO_PORTX_SPACING (0x30)
-/* Port X Pin Data INPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDIR (0x04)
-/* Port X Pin Data OUTPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDOR (0x08)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x0C)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x10)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x14)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x18)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x1C)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x20)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-#ifdef CONFIG_MACH_U300_BS335
-/* seven ports of 8 bits each = GPIO pins 0..55 */
-#define U300_GPIO_NUM_PORTS 7
-#else
-/* five ports of 8 bits each = GPIO pins 0..39 */
-#define U300_GPIO_NUM_PORTS 5
-#endif
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
-#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP 4
-#define U300_GPIO_PIN_CAM_REG_EN 5
-#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
-#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
- defined(CONFIG_MACH_U300_BS335)
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_UART_CTS 2
-#define U300_GPIO_PIN_UART_RTS 3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-
-#ifdef CONFIG_MACH_U300_BS335
-
-#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
-#endif
-
-#endif
-
-/* translates a pin number to a port number */
-#define PIN_TO_PORT(val) (val >> 3)
-
-/* These can be found in arch/arm/mach-u300/gpio.c */
-extern int gpio_is_valid(int number);
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-extern int gpio_register_callback(unsigned gpio,
- int (*func)(void *arg),
- void *);
-extern int gpio_unregister_callback(unsigned gpio);
-extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
-extern void disable_irq_on_gpio_pin(unsigned gpio);
-extern void gpio_pullup(unsigned gpio, int value);
-extern int gpio_get_value(unsigned gpio);
-extern void gpio_set_value(unsigned gpio, int value);
-
-#define gpio_get_value_cansleep gpio_get_value
-#define gpio_set_value_cansleep gpio_set_value
-
-/* wrappers to sleep-enable the previous two functions */
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
- return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
- /*
- * FIXME: This is no 1-1 mapping at all, it points to the
- * whole block of 8 pins.
- */
- return (irq - IRQ_U300_GPIO_PORT0) << 3;
-}
-
-#endif
/* DB3150 and DB3200 have only 45 IRQs */
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_NR_IRQS 45
+#define U300_VIC_IRQS_END 45
#endif
/* The DB3350-specific interrupt lines */
#define IRQ_U300_GPIO_PORT4 53
#define IRQ_U300_GPIO_PORT5 54
#define IRQ_U300_GPIO_PORT6 55
-#define U300_NR_IRQS 56
+#define U300_VIC_IRQS_END 56
#endif
/* The DB3210-specific interrupt lines */
#define IRQ_U300_NFIF 45
#define IRQ_U300_NFIF2 46
#define IRQ_U300_SYSCON_PLL_LOCK 47
-#define U300_NR_IRQS 48
+#define U300_VIC_IRQS_END 48
#endif
-#ifdef CONFIG_AB3550_CORE
-#define IRQ_AB3550_BASE (U300_NR_IRQS)
-#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37)
+/* Maximum 8*7 GPIO lines */
+#ifdef CONFIG_GPIO_U300
+#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END)
+#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56)
+#else
+#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
+#endif
-#define NR_IRQS (IRQ_AB3550_END + 1)
+/* Optional AB3550 mixsig chip */
+#ifdef CONFIG_AB3550_CORE
+#define IRQ_AB3550_BASE (IRQ_U300_GPIO_END)
+#define IRQ_AB3550_END (IRQ_AB3550_BASE + 38)
#else
-#define NR_IRQS U300_NR_IRQS
+#define IRQ_AB3550_END (IRQ_U300_GPIO_END)
#endif
+#define NR_IRQS (IRQ_AB3550_END)
+
#endif
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
#include <linux/dmaengine.h>
#include <linux/amba/mmci.h>
#include <linux/slab.h>
#include <mach/coh901318.h>
#include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
#include "mmc.h"
#include "padmux.h"
select ARM_GIC
select HAS_MTU
select ARM_ERRATA_753970
+ select ARM_ERRATA_754322
menu "Ux500 SoC"
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include "pins-db8500.h"
* Board data for the U8500 UIB, also known as the New UIB
* License terms: GNU General Public License (GPL), version 2
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/mfd/tc3589x.h>
#include <linux/input/matrix_keypad.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
#include "board-mop500.h"
#include <plat/i2c.h>
#include <plat/ste_dma40.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/db5500-regs.h>
#include <plat/ste_dma40.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
-#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <plat/pincfg.h>
#include <plat/i2c.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/devices.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
-#include <plat/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/devices.h>
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
ux500_cache_sync();
}
-static int ux500_l2x0_init(void)
+static int __init ux500_l2x0_unlock(void)
+{
+ int i;
+
+ /*
+ * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
+ * apparently locks both caches before jumping to the kernel. The
+ * l2x0 core will not touch the unlock registers if the l2x0 is
+ * already enabled, so we do it right here instead. The PL310 has
+ * 8 sets of registers, one per possible CPU.
+ */
+ for (i = 0; i < 8; i++) {
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+ return 0;
+}
+
+static int __init ux500_l2x0_init(void)
{
if (cpu_is_u5500())
l2x0_base = __io_address(U5500_L2CC_BASE);
else
ux500_unknown_soc();
+ /* Unlock before init */
+ ux500_l2x0_unlock();
+
/* 64KB way size, 8 way associativity, force WA */
l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
-#include <plat/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
*/
#define ARCH_NR_GPIOS 350
-#include <plat/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
.rate = 1000000,
};
+static struct clk v2m_ref_clk = {
+ .rate = 32768,
+};
+
static struct clk dummy_apb_pclk;
static struct clk_lookup v2m_lookups[] = {
}, { /* CLCD */
.dev_id = "mb:clcd",
.clk = &osc1_clk,
+ }, { /* SP805 WDT */
+ .dev_id = "mb:wdt",
+ .clk = &v2m_ref_clk,
}, { /* SP804 timers */
.dev_id = "sp804",
.con_id = "v2m-timer0",
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
static inline int gpio_to_irq(unsigned gpio)
{
return gpio;
}
+#define gpio_to_irq gpio_to_irq
static inline int irq_to_gpio(unsigned irq)
{
cmp \tmp, # 0x5600 @ Is it ldrsb?
orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes
tst \tmp, #1 << 11 @ L = 0 -> write
- orreq \psr, \psr, #1 << 11 @ yes.
+ orreq \fsr, \fsr, #1 << 11 @ yes.
b do_DataAbort
not_thumb:
.endm
spin_unlock_irqrestore(&l2x0_lock, flags);
}
+static void __init l2x0_unlock(__u32 cache_id)
+{
+ int lockregs;
+ int i;
+
+ if (cache_id == L2X0_CACHE_ID_PART_L310)
+ lockregs = 8;
+ else
+ /* L210 and unknown types */
+ lockregs = 1;
+
+ for (i = 0; i < lockregs; i++) {
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+}
+
void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
{
__u32 aux;
* accessing the below registers will fault.
*/
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+ /* Make sure that I&D is not locked down when starting */
+ l2x0_unlock(cache_id);
/* l2x0 controller is disabled */
writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
dcache_line_size r2, r3
sub r3, r2, #1
bic r12, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification
add r12, r12, r2
add r1, r0, r1
sub r3, r2, #1
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line
add r0, r0, r2
sub r3, r2, #1
tst r0, r3
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line
tst r1, r3
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
mcr p15, 0, r0, c7, c10, 1 @ clean D / U line
add r0, r0, r2
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line
add r0, r0, r2
if (addr)
*handle = pfn_to_dma(dev, page_to_pfn(page));
+ else
+ __dma_free_buffer(page, size);
return addr;
}
#ifdef CONFIG_HAVE_ARCH_PFN_VALID
int pfn_valid(unsigned long pfn)
{
- return memblock_is_memory(pfn << PAGE_SHIFT);
+ return memblock_is_memory(__pfn_to_phys(pfn));
}
EXPORT_SYMBOL(pfn_valid);
#endif
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
-.equ cpu_arm920_suspend_size, 4 * 3
+.equ cpu_arm920_suspend_size, 4 * 4
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm920_do_suspend)
stmfd sp!, {r4 - r7, lr}
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
-.equ cpu_arm926_suspend_size, 4 * 3
+.equ cpu_arm926_suspend_size, 4 * 4
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm926_do_suspend)
stmfd sp!, {r4 - r7, lr}
ENTRY(cpu_sa1100_do_resume)
ldmia r0, {r4 - r7} @ load cp regs
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
- mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
- mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
- mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache
+ mcr p15, 0, ip, c9, c0, 0 @ invalidate RB
+ mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB
mcr p15, 0, r4, c3, c0, 0 @ domain ID
mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
+#ifdef CONFIG_ARM_ERRATA_364296
+ /*
+ * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data
+ * corruption with hit-under-miss enabled). The conditional code below
+ * (setting the undocumented bit 31 in the auxiliary control register
+ * and the FI bit in the control register) disables hit-under-miss
+ * without putting the processor into full low interrupt latency mode.
+ */
+ ldr r6, =0x4107b362 @ id for ARM1136 r0p2
+ mrc p15, 0, r5, c0, c0, 0 @ get processor id
+ teq r5, r6 @ check for the faulty core
+ mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg
+ orreq r5, r5, #(1 << 31) @ set the undocumented bit 31
+ mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg
+ orreq r0, r0, #(1 << 21) @ low interrupt latency configuration
+#endif
mov pc, lr @ return to head.S:__ret
/*
ENTRY(cpu_v7_reset)
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x1 @ ...............m
+ THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions)
mcr p15, 0, r1, c1, c0, 0 @ disable MMU
isb
mov pc, r0
mcr p15, 0, r7, c2, c0, 0 @ TTB 0
mcr p15, 0, r8, c2, c0, 1 @ TTB 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
+ teq r4, r10 @ Is it already set?
+ mcrne p15, 0, r10, c1, c0, 1 @ No, so write it
mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
isb
+ dsb
mov r0, r9 @ control register
mov r2, r7, lsr #14 @ get TTB0 base
mov r2, r2, lsl #14
.align
.globl cpu_xsc3_suspend_size
-.equ cpu_xsc3_suspend_size, 4 * 8
+.equ cpu_xsc3_suspend_size, 4 * 7
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xsc3_do_suspend)
stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
mrc p15, 0, r10, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs
+ stmia r0, {r4 - r10} @ store cp regs
ldmia sp!, {r4 - r10, pc}
ENDPROC(cpu_xsc3_do_suspend)
ENTRY(cpu_xsc3_do_resume)
- ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs
+ ldmia r0, {r4 - r10} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
#include <linux/spinlock.h>
#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
/* There's a off-by-one betweem the gpio bank number and the gpiochip */
/* range e.g. GPIO_1_5 is gpio 5 under linux */
#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
-/* use gpiolib dispatchers */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
#define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio))
#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
#define PAD_CTL_HYS (1 << 8)
#define PAD_CTL_PKE (1 << 7)
-#define PAD_CTL_PUE (1 << 6)
-#define PAD_CTL_PUS_100K_DOWN (0 << 4)
-#define PAD_CTL_PUS_47K_UP (1 << 4)
-#define PAD_CTL_PUS_100K_UP (2 << 4)
-#define PAD_CTL_PUS_22K_UP (3 << 4)
+#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE)
+#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE)
#define PAD_CTL_ODE (1 << 3)
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_PLAT_GPIO_H
-#define __ASM_PLAT_GPIO_H
-#include <asm-generic/gpio.h>
-
-/*
- * These currently cause a function call to happen, they may be optimized
- * if needed by adding cpu-specific defines to identify blocks
- * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+#ifndef __PLAT_NOMADIK_GPIO
+#define __PLAT_NOMADIK_GPIO
/*
* "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
bool supports_sleepmode;
};
-#endif /* __ASM_PLAT_GPIO_H */
+#endif /* __PLAT_NOMADIK_GPIO */
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <plat/board.h>
-#include <mach/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include <plat/menelaus.h>
#include <plat/mcbsp.h>
#include <plat/omap44xx.h>
#include <linux/errno.h>
#include <asm-generic/gpio.h>
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned irq)
{
int tmp;
return pm_generic_resume_noirq(dev);
}
+#else
+#define _od_suspend_noirq NULL
+#define _od_resume_noirq NULL
#endif
static struct dev_pm_domain omap_device_pm_domain = {
SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
_od_runtime_idle)
USE_PLATFORM_PM_SLEEP_OPS
- SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
+ .suspend_noirq = _od_suspend_noirq,
+ .resume_noirq = _od_resume_noirq,
}
};
#define __PLAT_GPIO_H
#include <linux/init.h>
-#include <asm-generic/gpio.h>
-
-/*
- * GENERIC_GPIO primitives.
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+#include <linux/types.h>
/*
* Orion-specific GPIO API extensions.
obj-y := dma.o
-obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
--- /dev/null
+#ifndef __PLAT_PXA_GPIO_H
+#define __PLAT_PXA_GPIO_H
+
+struct irq_data;
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+
+#endif /* __PLAT_PXA_GPIO_H */
#ifndef __PLAT_GPIO_H
#define __PLAT_GPIO_H
-struct irq_data;
+#define __ARM_GPIOLIB_COMPLEX
-/*
- * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
- * one set of registers. The register offsets are organized below:
- *
- * GPLR GPDR GPSR GPCR GRER GFER GEDR
- * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
- * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
- * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
- *
- * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
- * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
- * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
- *
- * NOTE:
- * BANK 3 is only available on PXA27x and later processors.
- * BANK 4 and 5 are only available on PXA935
- */
-
-#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
+/* The individual machine provides register offsets and NR_BUILTIN_GPIO */
+#include <mach/gpio-pxa.h>
static inline int gpio_get_value(unsigned gpio)
{
#define gpio_cansleep __gpio_cansleep
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
-typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
-
-extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
#endif /* __PLAT_GPIO_H */
#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
-void __init mfp_init_base(unsigned long mfpr_base);
+void __init mfp_init_base(void __iomem *mfpr_base);
void __init mfp_init_addr(struct mfp_addr_map *map);
/*
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
-void __init mfp_init_base(unsigned long mfpr_base)
+void __init mfp_init_base(void __iomem *mfpr_base)
{
int i;
for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
mfp_table[i].config = -1;
- mfpr_mmio_base = (void __iomem *)mfpr_base;
+ mfpr_mmio_base = mfpr_base;
}
void __init mfp_init_addr(struct mfp_addr_map *map)
if (IS_ERR(pclk))
return -EINVAL;
- rate = pclk->ops->get_rate(clk);
+ rate = pclk->ops->get_rate(pclk);
clk_put(pclk);
return rate;
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
+#include <asm/mach/irq.h>
+
#define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u)
#define CON_OFFSET 0x700
int group, pend_offset, mask_offset;
unsigned int pend, mask;
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
+
for (group = 0; group < bank->nr_groups; group++) {
struct s3c_gpio_chip *chip = bank->chips[group];
if (!chip)
pend &= ~BIT(offset);
}
}
+ chained_irq_exit(chip, desc);
}
static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
{
static int used_gpioint_groups = 0;
int group = chip->group;
- struct s5p_gpioint_bank *bank = NULL;
+ struct s5p_gpioint_bank *b, *bank = NULL;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
return -ENOMEM;
- list_for_each_entry(bank, &banks, list) {
- if (group >= bank->start &&
- group < bank->start + bank->nr_groups)
+ list_for_each_entry(b, &banks, list) {
+ if (group >= b->start && group < b->start + b->nr_groups) {
+ bank = b;
break;
+ }
}
if (!bank)
return -EINVAL;
*/
DEFINE_SPINLOCK(clocks_lock);
+/* Global watchdog clock used by arch_wtd_reset() callback */
+struct clk *s3c2410_wdtclk;
+static int __init s3c_wdt_reset_init(void)
+{
+ s3c2410_wdtclk = clk_get(NULL, "watchdog");
+ if (IS_ERR(s3c2410_wdtclk))
+ printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+ return 0;
+}
+arch_initcall(s3c_wdt_reset_init);
+
/* enable and disable calls for use with the clk struct */
static int clk_null_enable(struct clk *clk, int enable)
int func;
};
-extern void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
struct platform_pwm_backlight_data *bl_data);
#endif /* __ASM_PLAT_BACKLIGHT_H */
* published by the Free Software Foundation.
*/
+#ifndef __ASM_PLAT_CLOCK_H
+#define __ASM_PLAT_CLOCK_H __FILE__
+
#include <linux/spinlock.h>
#include <linux/clkdev.h>
extern void s3c_pwmclk_init(void);
+/* Global watchdog clock used by arch_wtd_reset() callback */
+
+extern struct clk *s3c2410_wdtclk;
+
+#endif /* __ASM_PLAT_CLOCK_H */
* published by the Free Software Foundation.
*/
+#include <plat/clock.h>
#include <plat/regs-watchdog.h>
#include <mach/map.h>
static inline void arch_wdt_reset(void)
{
- struct clk *wdtclk;
-
printk("arch_reset: attempting watchdog reset\n");
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
- wdtclk = clk_get(NULL, "watchdog");
- if (!IS_ERR(wdtclk)) {
- clk_enable(wdtclk);
- } else
- printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+ if (s3c2410_wdtclk)
+ clk_enable(s3c2410_wdtclk);
/* put initial values into count and data */
__raw_writel(0x80, S3C2410_WTCNT);
#include <plat/irq-vic-timer.h>
#include <plat/regs-timer.h>
+#include <asm/mach/irq.h>
+
static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
{
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
generic_handle_irq((int)desc->irq_data.handler_data);
+ chained_irq_exit(chip, desc);
}
/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-/*
- * arch/arm/plat-spear/include/plat/gpio.h
- *
- * GPIO macros for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_GPIO_H
-#define __PLAT_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __PLAT_GPIO_H */
+/* empty */
nokia_rx51 MACH_NOKIA_RX51 NOKIA_RX51 1955
omap_zoom2 MACH_OMAP_ZOOM2 OMAP_ZOOM2 1967
cpuat9260 MACH_CPUAT9260 CPUAT9260 1973
-eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
+eukrea_cpuimx27 MACH_EUKREA_CPUIMX27 EUKREA_CPUIMX27 1975
acs5k MACH_ACS5K ACS5K 1982
snapper_9260 MACH_SNAPPER_9260 SNAPPER_9260 1987
dsm320 MACH_DSM320 DSM320 1988
omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791
ti8168evm MACH_TI8168EVM TI8168EVM 2800
teton_bga MACH_TETON_BGA TETON_BGA 2816
-eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820
-eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821
+eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25SD EUKREA_CPUIMX25SD 2820
+eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821
eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822
eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823
smdkc210 MACH_SMDKC210 SMDKC210 2838
.long sys_sched_rr_get_interval
.long sys_nanosleep
.long sys_poll
- .long sys_nfsservctl /* 145 */
+ .long sys_ni_syscall /* 145 was nfsservctl */
.long sys_setresgid
.long sys_getresgid
.long sys_prctl
.long _sys_ni_syscall /* for vm86 */
.long _sys_ni_syscall /* old "query_module" */
.long _sys_ni_syscall /* sys_poll */
- .long _sys_nfsservctl
+ .long _sys_ni_syscall /* old nfsservctl */
.long _sys_setresgid /* setresgid16 */ /* 170 */
.long _sys_getresgid /* getresgid16 */
.long _sys_prctl
.long sys_ni_syscall /* sys_vm86 */
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* old nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
.long sys_ni_syscall /* sys_vm86 */
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* Old nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
--- /dev/null
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_SERIAL_H */
.long sys_ni_syscall /* for vm86 */
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* Old nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
.long SYMBOL_NAME(sys_ni_syscall) /* for vm86 */
.long SYMBOL_NAME(sys_ni_syscall) /* sys_query_module */
.long SYMBOL_NAME(sys_poll)
- .long SYMBOL_NAME(sys_nfsservctl)
+ .long SYMBOL_NAME(sys_ni_syscall) /* old nfsservctl */
.long SYMBOL_NAME(sys_setresgid16) /* 170 */
.long SYMBOL_NAME(sys_getresgid16)
.long SYMBOL_NAME(sys_prctl)
data8 sys_sched_get_priority_min
data8 sys_sched_rr_get_interval
data8 sys_nanosleep
- data8 sys_nfsservctl
+ data8 sys_ni_syscall // old nfsservctl
data8 sys_prctl // 1170
data8 sys_getpagesize
data8 sys_mmap2
.long sys_tas /* vm86 syscall holder */
.long sys_ni_syscall /* query_module syscall holder */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* was nfsservctl */
.long sys_setresgid /* 170 */
.long sys_getresgid
.long sys_prctl
pgdat->node_mem_map + (__pfn - pgdat->node_start_pfn); \
})
#define page_to_pfn(_page) ({ \
- struct page *__p = (_page); \
+ const struct page *__p = (_page); \
struct pglist_data *pgdat; \
pgdat = &pg_data_map[page_to_nid(__p)]; \
((__p) - pgdat->node_mem_map) + pgdat->node_start_pfn; \
.long sys_getpagesize
.long sys_ni_syscall /* old "query_module" */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* old nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
.long sys_ni_syscall /* sys_vm86 */
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* old nfsservctl */
.long sys_setresgid /* 170 */
.long sys_getresgid
.long sys_prctl
sys sys_getresuid 3
sys sys_ni_syscall 0 /* was sys_query_module */
sys sys_poll 3
- sys sys_nfsservctl 3
+ sys sys_ni_syscall 0 /* was nfsservctl */
sys sys_setresgid 3 /* 4190 */
sys sys_getresgid 3
sys sys_prctl 5
PTR sys_ni_syscall /* 5170, was get_kernel_syms */
PTR sys_ni_syscall /* was query_module */
PTR sys_quotactl
- PTR sys_nfsservctl
+ PTR sys_ni_syscall /* was nfsservctl */
PTR sys_ni_syscall /* res. for getpmsg */
PTR sys_ni_syscall /* 5175 for putpmsg */
PTR sys_ni_syscall /* res. for afs_syscall */
PTR sys_ni_syscall /* 6170, was get_kernel_syms */
PTR sys_ni_syscall /* was query_module */
PTR sys_quotactl
- PTR compat_sys_nfsservctl
+ PTR sys_ni_syscall /* was nfsservctl */
PTR sys_ni_syscall /* res. for getpmsg */
PTR sys_ni_syscall /* 6175 for putpmsg */
PTR sys_ni_syscall /* res. for afs_syscall */
PTR sys_getresuid
PTR sys_ni_syscall /* was query_module */
PTR sys_poll
- PTR compat_sys_nfsservctl
+ PTR sys_ni_syscall /* was nfsservctl */
PTR sys_setresgid /* 4190 */
PTR sys_getresgid
PTR sys_prctl
.long sys_ni_syscall /* vm86 */
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* was nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
void or1k_unmap_page(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction dir,
struct dma_attrs *attrs);
+int or1k_map_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs);
+void or1k_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs);
void or1k_sync_single_for_cpu(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir);
debug_dma_unmap_page(dev, addr, size, dir, true);
}
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+ int i, ents;
+ struct scatterlist *s;
+
+ for_each_sg(sg, s, nents, i)
+ kmemcheck_mark_initialized(sg_virt(s), s->length);
+ BUG_ON(!valid_dma_direction(dir));
+ ents = or1k_map_sg(dev, sg, nents, dir, NULL);
+ debug_dma_map_sg(dev, sg, nents, ents, dir);
+
+ return ents;
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+ BUG_ON(!valid_dma_direction(dir));
+ debug_dma_unmap_sg(dev, sg, nents, dir);
+ or1k_unmap_sg(dev, sg, nents, dir, NULL);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ size_t offset, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_addr_t addr;
+
+ kmemcheck_mark_initialized(page_address(page) + offset, size);
+ BUG_ON(!valid_dma_direction(dir));
+ addr = or1k_map_page(dev, page, offset, size, dir, NULL);
+ debug_dma_map_page(dev, page, offset, size, dir, addr, false);
+
+ return addr;
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
+ size_t size, enum dma_data_direction dir)
+{
+ BUG_ON(!valid_dma_direction(dir));
+ or1k_unmap_page(dev, addr, size, dir, NULL);
+ debug_dma_unmap_page(dev, addr, size, dir, true);
+}
+
static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
size_t size,
enum dma_data_direction dir)
static inline int dma_supported(struct device *dev, u64 dma_mask)
{
/* Support 32 bit DMA mask exclusively */
- return dma_mask == 0xffffffffULL;
+ return dma_mask == DMA_BIT_MASK(32);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ return 0;
}
static inline int dma_set_mask(struct device *dev, u64 dma_mask)
/* This struct is saved by setup_frame in signal.c, to keep the current
context while a signal handler is executed. It's restored by sys_sigreturn.
-
- To keep things simple, we use pt_regs here even though normally you just
- specify the list of regs to save. Then we can use copy_from_user on the
- entire regs instead of a bunch of get_user's as well...
*/
struct sigcontext {
- struct pt_regs regs; /* needs to be first */
+ struct user_regs_struct regs; /* needs to be first */
unsigned long oldmask;
- unsigned long usp; /* usp before stacking this gunk on it */
};
#endif /* __ASM_OPENRISC_SIGCONTEXT_H */
/* Nothing special to do here... */
}
+int or1k_map_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct scatterlist *s;
+ int i;
+
+ for_each_sg(sg, s, nents, i) {
+ s->dma_address = or1k_map_page(dev, sg_page(s), s->offset,
+ s->length, dir, NULL);
+ }
+
+ return nents;
+}
+
+void or1k_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct scatterlist *s;
+ int i;
+
+ for_each_sg(sg, s, nents, i) {
+ or1k_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, NULL);
+ }
+}
+
void or1k_sync_single_for_cpu(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir)
return 0;
}
-
fs_initcall(dma_init);
static int restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc)
{
unsigned int err = 0;
- unsigned long old_usp;
/* Alwys make any pending restarted system call return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
- /* restore the regs from &sc->regs (same as sc, since regs is first)
+ /*
+ * Restore the regs from &sc->regs.
* (sc is already checked for VERIFY_READ since the sigframe was
* checked in sys_sigreturn previously)
*/
-
- if (__copy_from_user(regs, sc, sizeof(struct pt_regs)))
+ if (__copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long)))
+ goto badframe;
+ if (__copy_from_user(®s->pc, &sc->regs.pc, sizeof(unsigned long)))
+ goto badframe;
+ if (__copy_from_user(®s->sr, &sc->regs.sr, sizeof(unsigned long)))
goto badframe;
/* make sure the SM-bit is cleared so user-mode cannot fool us */
regs->sr &= ~SPR_SR_SM;
- /* restore the old USP as it was before we stacked the sc etc.
- * (we cannot just pop the sigcontext since we aligned the sp and
- * stuff after pushing it)
- */
-
- err |= __get_user(old_usp, &sc->usp);
-
- regs->sp = old_usp;
-
/* TODO: the other ports use regs->orig_XX to disable syscall checks
* after this completes, but we don't use that mechanism. maybe we can
* use it now ?
unsigned long mask)
{
int err = 0;
- unsigned long usp = regs->sp;
- /* copy the regs. they are first in sc so we can use sc directly */
+ /* copy the regs */
- err |= __copy_to_user(sc, regs, sizeof(struct pt_regs));
+ err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long));
+ err |= __copy_to_user(&sc->regs.pc, ®s->pc, sizeof(unsigned long));
+ err |= __copy_to_user(&sc->regs.sr, ®s->sr, sizeof(unsigned long));
/* then some other stuff */
err |= __put_user(mask, &sc->oldmask);
- err |= __put_user(usp, &sc->usp);
-
return err;
}
ENTRY_SAME(ni_syscall) /* query_module */
ENTRY_SAME(poll)
/* structs contain pointers and an in_addr... */
- ENTRY_COMP(nfsservctl)
+ ENTRY_SAME(ni_syscall) /* was nfsservctl */
ENTRY_SAME(setresgid) /* 170 */
ENTRY_SAME(getresgid)
ENTRY_SAME(prctl)
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x02000000>;
- bank-width = <1>;
+ bank-width = <2>;
device-width = <1>;
partition@0 {
label = "ramdisk";
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_VIRQ_DEBUG=y
CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_PPC is not set
# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_PPC is not set
# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
SYSCALL_SPU(getresuid)
SYSCALL(ni_syscall)
SYSCALL_SPU(poll)
-COMPAT_SYS(nfsservctl)
+SYSCALL(ni_syscall)
SYSCALL_SPU(setresgid)
SYSCALL_SPU(getresgid)
COMPAT_SYS_SPU(prctl)
.write = u4_pcie_write_config,
};
+static void __devinit pmac_pci_fixup_u4_of_node(struct pci_dev *dev)
+{
+ /* Apple's device-tree "hides" the root complex virtual P2P bridge
+ * on U4. However, Linux sees it, causing the PCI <-> OF matching
+ * code to fail to properly match devices below it. This works around
+ * it by setting the node of the bridge to point to the PHB node,
+ * which is not entirely correct but fixes the matching code and
+ * doesn't break anything else. It's also the simplest possible fix.
+ */
+ if (dev->dev.of_node == NULL)
+ dev->dev.of_node = pcibios_get_phb_of_node(dev->bus);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, 0x5b, pmac_pci_fixup_u4_of_node);
+
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC32
#define ODSR_CLEAR 0x1c00
#define LTLEECSR_ENABLE_ALL 0xFFC000FC
#define ESCSR_CLEAR 0x07120204
+#define IECSR_CLEAR 0x80000000
#define RIO_PORT1_EDCSR 0x0640
#define RIO_PORT2_EDCSR 0x0680
if (offset == 0) {
out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
- out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
} else {
out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
- out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
}
}
#define SET_PERSONALITY(ex) \
do { \
if (personality(current->personality) != PER_LINUX32) \
- set_personality(PER_LINUX); \
+ set_personality(PER_LINUX | \
+ (current->personality & ~PER_MASK)); \
if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
set_thread_flag(TIF_31BIT); \
else \
* struct gmap_struct - guest address space
* @mm: pointer to the parent mm_struct
* @table: pointer to the page directory
+ * @asce: address space control element for gmap page table
* @crst_list: list of all crst tables used in the guest address space
*/
struct gmap {
struct list_head list;
struct mm_struct *mm;
unsigned long *table;
+ unsigned long asce;
struct list_head crst_list;
};
#include <linux/sched.h>
#include <asm/vdso.h>
#include <asm/sigp.h>
+#include <asm/pgtable.h>
/*
* Make sure that the compiler is new enough. We want a compiler that
DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack));
DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack));
DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack));
+ DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce));
DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock));
DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock));
DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags));
DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp));
+ DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
#endif /* CONFIG_32BIT */
return 0;
}
lgfr %r4,%r4 # long
jg sys_poll # branch to system call
-ENTRY(compat_sys_nfsservctl_wrapper)
- lgfr %r2,%r2 # int
- llgtr %r3,%r3 # struct compat_nfsctl_arg*
- llgtr %r4,%r4 # union compat_nfsctl_res*
- jg compat_sys_nfsservctl # branch to system call
-
ENTRY(sys32_setresgid16_wrapper)
llgfr %r2,%r2 # __kernel_old_gid_emu31_t
llgfr %r3,%r3 # __kernel_old_gid_emu31_t
static __init void rescue_initrd(void)
{
#ifdef CONFIG_BLK_DEV_INITRD
+ unsigned long min_initrd_addr = (unsigned long) _end + (4UL << 20);
/*
- * Move the initrd right behind the bss section in case it starts
- * within the bss section. So we don't overwrite it when the bss
- * section gets cleared.
+ * Just like in case of IPL from VM reader we make sure there is a
+ * gap of 4MB between end of kernel and start of initrd.
+ * That way we can also be sure that saving an NSS will succeed,
+ * which however only requires different segments.
*/
if (!INITRD_START || !INITRD_SIZE)
return;
- if (INITRD_START >= (unsigned long) __bss_stop)
+ if (INITRD_START >= min_initrd_addr)
return;
- memmove(__bss_stop, (void *) INITRD_START, INITRD_SIZE);
- INITRD_START = (unsigned long) __bss_stop;
+ memmove((void *) min_initrd_addr, (void *) INITRD_START, INITRD_SIZE);
+ INITRD_START = min_initrd_addr;
#endif
}
lg %r14,__LC_THREAD_INFO # pointer thread_info struct
tm __TI_flags+7(%r14),_TIF_EXIT_SIE
jnz sie_exit
+ lg %r14,__LC_GMAP # get gmap pointer
+ ltgr %r14,%r14
+ jz sie_gmap
+ lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce
+sie_gmap:
lg %r14,__SF_EMPTY(%r15) # get control block pointer
SPP __SF_EMPTY(%r15) # set guest id
sie 0(%r14)
SPP __LC_CMF_HPP # set host id
lg %r14,__LC_THREAD_INFO # pointer thread_info struct
sie_exit:
+ lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
ni __TI_flags+6(%r14),255-(_TIF_SIE>>8)
lg %r14,__SF_EMPTY+8(%r15) # load guest register save area
stmg %r0,%r13,0(%r14) # save guest gprs 0-13
/* sysfs: create fcp kset for mixing attr group and bin attrs */
reipl_fcp_kset = kset_create_and_add(IPL_FCP_STR, NULL,
&reipl_kset->kobj);
- if (!reipl_kset) {
+ if (!reipl_fcp_kset) {
free_page((unsigned long) reipl_block_fcp);
return -ENOMEM;
}
static void stop_run(struct shutdown_trigger *trigger)
{
- if (strcmp(trigger->name, ON_PANIC_STR) == 0)
+ if (strcmp(trigger->name, ON_PANIC_STR) == 0 ||
+ strcmp(trigger->name, ON_RESTART_STR) == 0)
disabled_wait((unsigned long) __builtin_return_address(0));
while (sigp(smp_processor_id(), sigp_stop) == sigp_busy)
cpu_relax();
/* on restart */
static struct shutdown_trigger on_restart_trigger = {ON_RESTART_STR,
- &reipl_action};
+ &stop_action};
static ssize_t on_restart_show(struct kobject *kobj,
struct kobj_attribute *attr, char *page)
NI_SYSCALL /* for vm86 */
NI_SYSCALL /* old sys_query_module */
SYSCALL(sys_poll,sys_poll,sys32_poll_wrapper)
-SYSCALL(sys_nfsservctl,sys_nfsservctl,compat_sys_nfsservctl_wrapper)
+NI_SYSCALL /* old nfsservctl */
SYSCALL(sys_setresgid16,sys_ni_syscall,sys32_setresgid16_wrapper) /* 170 old setresgid16 syscall */
SYSCALL(sys_getresgid16,sys_ni_syscall,sys32_getresgid16_wrapper) /* old getresgid16 syscall */
SYSCALL(sys_prctl,sys_prctl,sys32_prctl_wrapper)
switch (ext) {
case KVM_CAP_S390_PSW:
+ case KVM_CAP_S390_GMAP:
r = 1;
break;
default:
vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK;
restore_fp_regs(&vcpu->arch.guest_fpregs);
restore_access_regs(vcpu->arch.guest_acrs);
+ gmap_enable(vcpu->arch.gmap);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
+ gmap_disable(vcpu->arch.gmap);
save_fp_regs(&vcpu->arch.guest_fpregs);
save_access_regs(vcpu->arch.guest_acrs);
restore_fp_regs(&vcpu->arch.host_fpregs);
local_irq_disable();
kvm_guest_enter();
local_irq_enable();
- gmap_enable(vcpu->arch.gmap);
VCPU_EVENT(vcpu, 6, "entering sie flags %x",
atomic_read(&vcpu->arch.sie_block->cpuflags));
if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
}
VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
vcpu->arch.sie_block->icptcode);
- gmap_disable(vcpu->arch.gmap);
local_irq_disable();
kvm_guest_exit();
local_irq_enable();
table = (unsigned long *) page_to_phys(page);
crst_table_init(table, _REGION1_ENTRY_EMPTY);
gmap->table = table;
+ gmap->asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
+ _ASCE_USER_BITS | __pa(table);
list_add(&gmap->list, &mm->context.gmap_list);
return gmap;
*/
void gmap_enable(struct gmap *gmap)
{
- /* Load primary space page table origin. */
- S390_lowcore.user_asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
- _ASCE_USER_BITS | __pa(gmap->table);
- asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
S390_lowcore.gmap = (unsigned long) gmap;
}
EXPORT_SYMBOL_GPL(gmap_enable);
*/
void gmap_disable(struct gmap *gmap)
{
- /* Load primary space page table origin. */
- S390_lowcore.user_asce =
- gmap->mm->context.asce_bits | __pa(gmap->mm->pgd);
- asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
S390_lowcore.gmap = 0UL;
}
EXPORT_SYMBOL_GPL(gmap_disable);
/* Walk the guest addr space page table */
table = gmap->table + (((to + off) >> 53) & 0x7ff);
if (*table & _REGION_ENTRY_INV)
- return 0;
+ goto out;
table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
table = table + (((to + off) >> 42) & 0x7ff);
if (*table & _REGION_ENTRY_INV)
- return 0;
+ goto out;
table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
table = table + (((to + off) >> 31) & 0x7ff);
if (*table & _REGION_ENTRY_INV)
- return 0;
+ goto out;
table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
table = table + (((to + off) >> 20) & 0x7ff);
flush |= gmap_unlink_segment(gmap, table);
*table = _SEGMENT_ENTRY_INV;
}
+out:
up_read(&gmap->mm->mmap_sem);
if (flush)
gmap_flush_tlb(gmap);
struct perf_event;
struct perf_sample_data;
-extern void ptrace_triggered(struct perf_event *bp, int nmi,
+extern void ptrace_triggered(struct perf_event *bp,
struct perf_sample_data *data, struct pt_regs *regs);
#define task_pt_regs(task) \
#include <linux/serial_sci.h>
#include <linux/io.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <linux/sh_timer.h>
#include <linux/sh_dma.h>
#include <linux/atomic.h>
#include <asm/smp.h>
-static void (*pm_idle)(void);
+void (*pm_idle)(void);
static int hlt_counter;
.long sys_ni_syscall /* vm86 */
.long sys_ni_syscall /* old "query_module" */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* was nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
.long sys_ni_syscall /* vm86 */
.long sys_ni_syscall /* old "query_module" */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* was nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
break;
}
break;
+
+ case 9: /* mov.w @(disp,PC),Rn */
+ srcu = (unsigned char __user *)regs->pc;
+ srcu += 4;
+ srcu += (instruction & 0x00FF) << 1;
+ dst = (unsigned char *)rn;
+ *(unsigned long *)dst = 0;
+
+#if !defined(__LITTLE_ENDIAN__)
+ dst += 2;
+#endif
+
+ if (ma->from(dst, srcu, 2))
+ goto fetch_fault;
+ sign_extend(2, dst);
+ ret = 0;
+ break;
+
+ case 0xd: /* mov.l @(disp,PC),Rn */
+ srcu = (unsigned char __user *)(regs->pc & ~0x3);
+ srcu += 4;
+ srcu += (instruction & 0x00FF) << 2;
+ dst = (unsigned char *)rn;
+ *(unsigned long *)dst = 0;
+
+ if (ma->from(dst, srcu, 4))
+ goto fetch_fault;
+ ret = 0;
+ break;
}
return ret;
case 0x0500: /* mov.w @(disp,Rm),R0 */
goto simple;
case 0x0B00: /* bf lab - no delayslot*/
+ ret = 0;
break;
case 0x0F00: /* bf/s lab */
ret = handle_delayslot(regs, instruction, ma);
}
break;
case 0x0900: /* bt lab - no delayslot */
+ ret = 0;
break;
case 0x0D00: /* bt/s lab */
ret = handle_delayslot(regs, instruction, ma);
}
break;
+ case 0x9000: /* mov.w @(disp,Rm),Rn */
+ goto simple;
+
case 0xA000: /* bra label */
ret = handle_delayslot(regs, instruction, ma);
if (ret==0)
regs->pc += SH_PC_12BIT_OFFSET(instruction);
}
break;
+
+ case 0xD000: /* mov.l @(disp,Rm),Rn */
+ goto simple;
}
return ret;
int si_mask;
} __siginfo32_t;
+#define __SIGC_MAXWIN 7
+
+typedef struct {
+ unsigned long locals[8];
+ unsigned long ins[8];
+} __siginfo_reg_window;
+
+typedef struct {
+ int wsaved;
+ __siginfo_reg_window reg_window[__SIGC_MAXWIN];
+ unsigned long rwbuf_stkptrs[__SIGC_MAXWIN];
+} __siginfo_rwin_t;
+
#ifdef CONFIG_SPARC64
typedef struct {
unsigned int si_float_regs [64];
unsigned long ss_size;
} sigc_stack;
unsigned long sigc_mask;
+ __siginfo_rwin_t * sigc_rwin_save;
};
#else
#define SUN4V_CHIP_NIAGARA1 0x01
#define SUN4V_CHIP_NIAGARA2 0x02
#define SUN4V_CHIP_NIAGARA3 0x03
+#define SUN4V_CHIP_NIAGARA4 0x04
+#define SUN4V_CHIP_NIAGARA5 0x05
#define SUN4V_CHIP_UNKNOWN 0xff
#ifndef __ASSEMBLY__
((tlb_type == hypervisor && \
(sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
sun4v_chip_type == SUN4V_CHIP_NIAGARA2 || \
- sun4v_chip_type == SUN4V_CHIP_NIAGARA3)) ? \
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA3 || \
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA4 || \
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA5)) ? \
&xor_block_niagara : \
&xor_block_VIS)
obj-y += process_$(BITS).o
obj-y += signal_$(BITS).o
+obj-y += sigutil_$(BITS).o
obj-$(CONFIG_SPARC32) += ioport.o
obj-y += setup_$(BITS).o
obj-y += idprom.o
sparc_pmu_type = "niagara3";
break;
+ case SUN4V_CHIP_NIAGARA4:
+ sparc_cpu_type = "UltraSparc T4 (Niagara4)";
+ sparc_fpu_type = "UltraSparc T4 integrated FPU";
+ sparc_pmu_type = "niagara4";
+ break;
+
+ case SUN4V_CHIP_NIAGARA5:
+ sparc_cpu_type = "UltraSparc T5 (Niagara5)";
+ sparc_fpu_type = "UltraSparc T5 integrated FPU";
+ sparc_pmu_type = "niagara5";
+ break;
+
default:
printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n",
prom_cpu_compatible);
case SUN4V_CHIP_NIAGARA1:
case SUN4V_CHIP_NIAGARA2:
case SUN4V_CHIP_NIAGARA3:
+ case SUN4V_CHIP_NIAGARA4:
+ case SUN4V_CHIP_NIAGARA5:
rover_inc_table = niagara_iterate_method;
break;
default:
prom_niagara_prefix:
.asciz "SUNW,UltraSPARC-T"
prom_sparc_prefix:
- .asciz "SPARC-T"
+ .asciz "SPARC-"
.align 4
prom_root_compatible:
.skip 64
or %g1, %lo(prom_cpu_compatible), %g1
sethi %hi(prom_sparc_prefix), %g7
or %g7, %lo(prom_sparc_prefix), %g7
- mov 7, %g3
+ mov 6, %g3
90: ldub [%g7], %g2
ldub [%g1], %g4
cmp %g2, %g4
sethi %hi(prom_cpu_compatible), %g1
or %g1, %lo(prom_cpu_compatible), %g1
- ldub [%g1 + 7], %g2
+ ldub [%g1 + 6], %g2
+ cmp %g2, 'T'
+ be,pt %xcc, 70f
+ cmp %g2, 'M'
+ bne,pn %xcc, 4f
+ nop
+
+70: ldub [%g1 + 7], %g2
cmp %g2, '3'
be,pt %xcc, 5f
mov SUN4V_CHIP_NIAGARA3, %g4
+ cmp %g2, '4'
+ be,pt %xcc, 5f
+ mov SUN4V_CHIP_NIAGARA4, %g4
+ cmp %g2, '5'
+ be,pt %xcc, 5f
+ mov SUN4V_CHIP_NIAGARA5, %g4
ba,pt %xcc, 4f
nop
be,pt %xcc, niagara2_patch
nop
cmp %g1, SUN4V_CHIP_NIAGARA3
+ be,pt %xcc, niagara2_patch
+ nop
+ cmp %g1, SUN4V_CHIP_NIAGARA4
+ be,pt %xcc, niagara2_patch
+ nop
+ cmp %g1, SUN4V_CHIP_NIAGARA5
be,pt %xcc, niagara2_patch
nop
#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu)
/* All SUN4D IPIs are sent on this IRQ, may be shared with hard IRQs */
-#define SUN4D_IPI_IRQ 14
+#define SUN4D_IPI_IRQ 13
extern void sun4d_ipi_interrupt(void);
#endif
}
- /* Now, this task is no longer a kernel thread. */
- current->thread.current_ds = USER_DS;
+ /* This task is no longer a kernel thread. */
if (current->thread.flags & SPARC_FLAG_KTHREAD) {
current->thread.flags &= ~SPARC_FLAG_KTHREAD;
/* Clear FPU register state. */
t->fpsaved[0] = 0;
-
- if (get_thread_current_ds() != ASI_AIUS)
- set_fs(USER_DS);
}
/* It's a bit more tricky when 64-bit tasks are involved... */
prom_halt();
break;
case 'p':
- /* Just ignore, this behavior is now the default. */
+ prom_early_console.flags &= ~CON_BOOT;
break;
default:
printk("Unknown boot switch (-%c)\n", c);
prom_halt();
break;
case 'p':
- /* Just ignore, this behavior is now the default. */
+ prom_early_console.flags &= ~CON_BOOT;
break;
case 'P':
/* Force UltraSPARC-III P-Cache on. */
else if (tlb_type == hypervisor) {
if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 ||
sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
- sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
cap |= HWCAP_SPARC_BLKINIT;
if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
- sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
cap |= HWCAP_SPARC_N2;
}
cap |= AV_SPARC_VIS;
if (tlb_type == cheetah || tlb_type == cheetah_plus)
cap |= AV_SPARC_VIS | AV_SPARC_VIS2;
- if (tlb_type == cheetah_plus)
- cap |= AV_SPARC_POPC;
+ if (tlb_type == cheetah_plus) {
+ unsigned long impl, ver;
+
+ __asm__ __volatile__("rdpr %%ver, %0" : "=r" (ver));
+ impl = ((ver >> 32) & 0xffff);
+ if (impl == PANTHER_IMPL)
+ cap |= AV_SPARC_POPC;
+ }
if (tlb_type == hypervisor) {
if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1)
cap |= AV_SPARC_ASI_BLK_INIT;
if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
- sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
cap |= (AV_SPARC_VIS | AV_SPARC_VIS2 |
AV_SPARC_ASI_BLK_INIT |
AV_SPARC_POPC);
- if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+ if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
cap |= (AV_SPARC_VIS3 | AV_SPARC_HPC |
AV_SPARC_FMAF);
}
#include <asm/visasm.h>
#include <asm/compat_signal.h>
+#include "sigutil.h"
+
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
/* This magic should be in g_upper[0] for all upper parts
struct signal_frame32 {
struct sparc_stackf32 ss;
__siginfo32_t info;
- /* __siginfo_fpu32_t * */ u32 fpu_save;
+ /* __siginfo_fpu_t * */ u32 fpu_save;
unsigned int insns[2];
unsigned int extramask[_COMPAT_NSIG_WORDS - 1];
unsigned int extra_size; /* Should be sizeof(siginfo_extra_v8plus_t) */
/* Only valid if (info.si_regs.psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS */
siginfo_extra_v8plus_t v8plus;
- __siginfo_fpu_t fpu_state;
-};
+ /* __siginfo_rwin_t * */u32 rwin_save;
+} __attribute__((aligned(8)));
typedef struct compat_siginfo{
int si_signo;
compat_siginfo_t info;
struct pt_regs32 regs;
compat_sigset_t mask;
- /* __siginfo_fpu32_t * */ u32 fpu_save;
+ /* __siginfo_fpu_t * */ u32 fpu_save;
unsigned int insns[2];
stack_t32 stack;
unsigned int extra_size; /* Should be sizeof(siginfo_extra_v8plus_t) */
/* Only valid if (regs.psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS */
siginfo_extra_v8plus_t v8plus;
- __siginfo_fpu_t fpu_state;
-};
-
-/* Align macros */
-#define SF_ALIGNEDSZ (((sizeof(struct signal_frame32) + 15) & (~15)))
-#define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame32) + 15) & (~15)))
+ /* __siginfo_rwin_t * */u32 rwin_save;
+} __attribute__((aligned(8)));
int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
{
return 0;
}
-static int restore_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
-{
- unsigned long *fpregs = current_thread_info()->fpregs;
- unsigned long fprs;
- int err;
-
- err = __get_user(fprs, &fpu->si_fprs);
- fprs_write(0);
- regs->tstate &= ~TSTATE_PEF;
- if (fprs & FPRS_DL)
- err |= copy_from_user(fpregs, &fpu->si_float_regs[0], (sizeof(unsigned int) * 32));
- if (fprs & FPRS_DU)
- err |= copy_from_user(fpregs+16, &fpu->si_float_regs[32], (sizeof(unsigned int) * 32));
- err |= __get_user(current_thread_info()->xfsr[0], &fpu->si_fsr);
- err |= __get_user(current_thread_info()->gsr[0], &fpu->si_gsr);
- current_thread_info()->fpsaved[0] |= fprs;
- return err;
-}
-
void do_sigreturn32(struct pt_regs *regs)
{
struct signal_frame32 __user *sf;
+ compat_uptr_t fpu_save;
+ compat_uptr_t rwin_save;
unsigned int psr;
- unsigned pc, npc, fpu_save;
+ unsigned pc, npc;
sigset_t set;
unsigned seta[_COMPAT_NSIG_WORDS];
int err, i;
pt_regs_clear_syscall(regs);
err |= __get_user(fpu_save, &sf->fpu_save);
- if (fpu_save)
- err |= restore_fpu_state32(regs, &sf->fpu_state);
+ if (!err && fpu_save)
+ err |= restore_fpu_state(regs, compat_ptr(fpu_save));
+ err |= __get_user(rwin_save, &sf->rwin_save);
+ if (!err && rwin_save) {
+ if (restore_rwin_state(compat_ptr(rwin_save)))
+ goto segv;
+ }
err |= __get_user(seta[0], &sf->info.si_mask);
err |= copy_from_user(seta+1, &sf->extramask,
(_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned int));
asmlinkage void do_rt_sigreturn32(struct pt_regs *regs)
{
struct rt_signal_frame32 __user *sf;
- unsigned int psr, pc, npc, fpu_save, u_ss_sp;
+ unsigned int psr, pc, npc, u_ss_sp;
+ compat_uptr_t fpu_save;
+ compat_uptr_t rwin_save;
mm_segment_t old_fs;
sigset_t set;
compat_sigset_t seta;
pt_regs_clear_syscall(regs);
err |= __get_user(fpu_save, &sf->fpu_save);
- if (fpu_save)
- err |= restore_fpu_state32(regs, &sf->fpu_state);
+ if (!err && fpu_save)
+ err |= restore_fpu_state(regs, compat_ptr(fpu_save));
err |= copy_from_user(&seta, &sf->mask, sizeof(compat_sigset_t));
err |= __get_user(u_ss_sp, &sf->stack.ss_sp);
st.ss_sp = compat_ptr(u_ss_sp);
do_sigaltstack((stack_t __user *) &st, NULL, (unsigned long)sf);
set_fs(old_fs);
+ err |= __get_user(rwin_save, &sf->rwin_save);
+ if (!err && rwin_save) {
+ if (restore_rwin_state(compat_ptr(rwin_save)))
+ goto segv;
+ }
+
switch (_NSIG_WORDS) {
case 4: set.sig[3] = seta.sig[6] + (((long)seta.sig[7]) << 32);
case 3: set.sig[2] = seta.sig[4] + (((long)seta.sig[5]) << 32);
return (void __user *) sp;
}
-static int save_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
-{
- unsigned long *fpregs = current_thread_info()->fpregs;
- unsigned long fprs;
- int err = 0;
-
- fprs = current_thread_info()->fpsaved[0];
- if (fprs & FPRS_DL)
- err |= copy_to_user(&fpu->si_float_regs[0], fpregs,
- (sizeof(unsigned int) * 32));
- if (fprs & FPRS_DU)
- err |= copy_to_user(&fpu->si_float_regs[32], fpregs+16,
- (sizeof(unsigned int) * 32));
- err |= __put_user(current_thread_info()->xfsr[0], &fpu->si_fsr);
- err |= __put_user(current_thread_info()->gsr[0], &fpu->si_gsr);
- err |= __put_user(fprs, &fpu->si_fprs);
-
- return err;
-}
-
/* The I-cache flush instruction only works in the primary ASI, which
* right now is the nucleus, aka. kernel space.
*
int signo, sigset_t *oldset)
{
struct signal_frame32 __user *sf;
+ int i, err, wsaved;
+ void __user *tail;
int sigframe_size;
u32 psr;
- int i, err;
unsigned int seta[_COMPAT_NSIG_WORDS];
/* 1. Make sure everything is clean */
synchronize_user_stack();
save_and_clear_fpu();
- sigframe_size = SF_ALIGNEDSZ;
- if (!(current_thread_info()->fpsaved[0] & FPRS_FEF))
- sigframe_size -= sizeof(__siginfo_fpu_t);
+ wsaved = get_thread_wsaved();
+
+ sigframe_size = sizeof(*sf);
+ if (current_thread_info()->fpsaved[0] & FPRS_FEF)
+ sigframe_size += sizeof(__siginfo_fpu_t);
+ if (wsaved)
+ sigframe_size += sizeof(__siginfo_rwin_t);
sf = (struct signal_frame32 __user *)
get_sigframe(&ka->sa, regs, sigframe_size);
if (invalid_frame_pointer(sf, sigframe_size))
goto sigill;
- if (get_thread_wsaved() != 0)
- goto sigill;
+ tail = (sf + 1);
/* 2. Save the current process state */
if (test_thread_flag(TIF_32BIT)) {
&sf->v8plus.asi);
if (psr & PSR_EF) {
- err |= save_fpu_state32(regs, &sf->fpu_state);
- err |= __put_user((u64)&sf->fpu_state, &sf->fpu_save);
+ __siginfo_fpu_t __user *fp = tail;
+ tail += sizeof(*fp);
+ err |= save_fpu_state(regs, fp);
+ err |= __put_user((u64)fp, &sf->fpu_save);
} else {
err |= __put_user(0, &sf->fpu_save);
}
+ if (wsaved) {
+ __siginfo_rwin_t __user *rwp = tail;
+ tail += sizeof(*rwp);
+ err |= save_rwin_state(wsaved, rwp);
+ err |= __put_user((u64)rwp, &sf->rwin_save);
+ set_thread_wsaved(0);
+ } else {
+ err |= __put_user(0, &sf->rwin_save);
+ }
switch (_NSIG_WORDS) {
case 4: seta[7] = (oldset->sig[3] >> 32);
err |= __copy_to_user(sf->extramask, seta + 1,
(_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned int));
- err |= copy_in_user((u32 __user *)sf,
- (u32 __user *)(regs->u_regs[UREG_FP]),
- sizeof(struct reg_window32));
-
+ if (!wsaved) {
+ err |= copy_in_user((u32 __user *)sf,
+ (u32 __user *)(regs->u_regs[UREG_FP]),
+ sizeof(struct reg_window32));
+ } else {
+ struct reg_window *rp;
+
+ rp = ¤t_thread_info()->reg_window[wsaved - 1];
+ for (i = 0; i < 8; i++)
+ err |= __put_user(rp->locals[i], &sf->ss.locals[i]);
+ for (i = 0; i < 6; i++)
+ err |= __put_user(rp->ins[i], &sf->ss.ins[i]);
+ err |= __put_user(rp->ins[6], &sf->ss.fp);
+ err |= __put_user(rp->ins[7], &sf->ss.callers_pc);
+ }
if (err)
goto sigsegv;
err |= __put_user(0x91d02010, &sf->insns[1]); /*t 0x10*/
if (err)
goto sigsegv;
-
flush_signal_insns(address);
}
return 0;
siginfo_t *info)
{
struct rt_signal_frame32 __user *sf;
+ int i, err, wsaved;
+ void __user *tail;
int sigframe_size;
u32 psr;
- int i, err;
compat_sigset_t seta;
/* 1. Make sure everything is clean */
synchronize_user_stack();
save_and_clear_fpu();
- sigframe_size = RT_ALIGNEDSZ;
- if (!(current_thread_info()->fpsaved[0] & FPRS_FEF))
- sigframe_size -= sizeof(__siginfo_fpu_t);
+ wsaved = get_thread_wsaved();
+
+ sigframe_size = sizeof(*sf);
+ if (current_thread_info()->fpsaved[0] & FPRS_FEF)
+ sigframe_size += sizeof(__siginfo_fpu_t);
+ if (wsaved)
+ sigframe_size += sizeof(__siginfo_rwin_t);
sf = (struct rt_signal_frame32 __user *)
get_sigframe(&ka->sa, regs, sigframe_size);
if (invalid_frame_pointer(sf, sigframe_size))
goto sigill;
- if (get_thread_wsaved() != 0)
- goto sigill;
+ tail = (sf + 1);
/* 2. Save the current process state */
if (test_thread_flag(TIF_32BIT)) {
&sf->v8plus.asi);
if (psr & PSR_EF) {
- err |= save_fpu_state32(regs, &sf->fpu_state);
- err |= __put_user((u64)&sf->fpu_state, &sf->fpu_save);
+ __siginfo_fpu_t __user *fp = tail;
+ tail += sizeof(*fp);
+ err |= save_fpu_state(regs, fp);
+ err |= __put_user((u64)fp, &sf->fpu_save);
} else {
err |= __put_user(0, &sf->fpu_save);
}
+ if (wsaved) {
+ __siginfo_rwin_t __user *rwp = tail;
+ tail += sizeof(*rwp);
+ err |= save_rwin_state(wsaved, rwp);
+ err |= __put_user((u64)rwp, &sf->rwin_save);
+ set_thread_wsaved(0);
+ } else {
+ err |= __put_user(0, &sf->rwin_save);
+ }
/* Update the siginfo structure. */
err |= copy_siginfo_to_user32(&sf->info, info);
}
err |= __copy_to_user(&sf->mask, &seta, sizeof(compat_sigset_t));
- err |= copy_in_user((u32 __user *)sf,
- (u32 __user *)(regs->u_regs[UREG_FP]),
- sizeof(struct reg_window32));
+ if (!wsaved) {
+ err |= copy_in_user((u32 __user *)sf,
+ (u32 __user *)(regs->u_regs[UREG_FP]),
+ sizeof(struct reg_window32));
+ } else {
+ struct reg_window *rp;
+
+ rp = ¤t_thread_info()->reg_window[wsaved - 1];
+ for (i = 0; i < 8; i++)
+ err |= __put_user(rp->locals[i], &sf->ss.locals[i]);
+ for (i = 0; i < 6; i++)
+ err |= __put_user(rp->ins[i], &sf->ss.ins[i]);
+ err |= __put_user(rp->ins[6], &sf->ss.fp);
+ err |= __put_user(rp->ins[7], &sf->ss.callers_pc);
+ }
if (err)
goto sigsegv;
#include <asm/pgtable.h>
#include <asm/cacheflush.h> /* flush_sig_insns */
+#include "sigutil.h"
+
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
unsigned long insns[2] __attribute__ ((aligned (8)));
unsigned int extramask[_NSIG_WORDS - 1];
unsigned int extra_size; /* Should be 0 */
- __siginfo_fpu_t fpu_state;
-};
+ __siginfo_rwin_t __user *rwin_save;
+} __attribute__((aligned(8)));
struct rt_signal_frame {
struct sparc_stackf ss;
unsigned int insns[2];
stack_t stack;
unsigned int extra_size; /* Should be 0 */
- __siginfo_fpu_t fpu_state;
-};
+ __siginfo_rwin_t __user *rwin_save;
+} __attribute__((aligned(8)));
/* Align macros */
#define SF_ALIGNEDSZ (((sizeof(struct signal_frame) + 7) & (~7)))
return _sigpause_common(set);
}
-static inline int
-restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
-{
- int err;
-#ifdef CONFIG_SMP
- if (test_tsk_thread_flag(current, TIF_USEDFPU))
- regs->psr &= ~PSR_EF;
-#else
- if (current == last_task_used_math) {
- last_task_used_math = NULL;
- regs->psr &= ~PSR_EF;
- }
-#endif
- set_used_math();
- clear_tsk_thread_flag(current, TIF_USEDFPU);
-
- if (!access_ok(VERIFY_READ, fpu, sizeof(*fpu)))
- return -EFAULT;
-
- err = __copy_from_user(¤t->thread.float_regs[0], &fpu->si_float_regs[0],
- (sizeof(unsigned long) * 32));
- err |= __get_user(current->thread.fsr, &fpu->si_fsr);
- err |= __get_user(current->thread.fpqdepth, &fpu->si_fpqdepth);
- if (current->thread.fpqdepth != 0)
- err |= __copy_from_user(¤t->thread.fpqueue[0],
- &fpu->si_fpqueue[0],
- ((sizeof(unsigned long) +
- (sizeof(unsigned long *)))*16));
- return err;
-}
-
asmlinkage void do_sigreturn(struct pt_regs *regs)
{
struct signal_frame __user *sf;
unsigned long up_psr, pc, npc;
sigset_t set;
__siginfo_fpu_t __user *fpu_save;
+ __siginfo_rwin_t __user *rwin_save;
int err;
/* Always make any pending restarted system calls return -EINTR */
pt_regs_clear_syscall(regs);
err |= __get_user(fpu_save, &sf->fpu_save);
-
if (fpu_save)
err |= restore_fpu_state(regs, fpu_save);
+ err |= __get_user(rwin_save, &sf->rwin_save);
+ if (rwin_save)
+ err |= restore_rwin_state(rwin_save);
/* This is pretty much atomic, no amount locking would prevent
* the races which exist anyways.
struct rt_signal_frame __user *sf;
unsigned int psr, pc, npc;
__siginfo_fpu_t __user *fpu_save;
+ __siginfo_rwin_t __user *rwin_save;
mm_segment_t old_fs;
sigset_t set;
stack_t st;
pt_regs_clear_syscall(regs);
err |= __get_user(fpu_save, &sf->fpu_save);
-
- if (fpu_save)
+ if (!err && fpu_save)
err |= restore_fpu_state(regs, fpu_save);
err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t));
do_sigaltstack((const stack_t __user *) &st, NULL, (unsigned long)sf);
set_fs(old_fs);
+ err |= __get_user(rwin_save, &sf->rwin_save);
+ if (!err && rwin_save) {
+ if (restore_rwin_state(rwin_save))
+ goto segv;
+ }
+
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
current->blocked = set;
return (void __user *) sp;
}
-static inline int
-save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
-{
- int err = 0;
-#ifdef CONFIG_SMP
- if (test_tsk_thread_flag(current, TIF_USEDFPU)) {
- put_psr(get_psr() | PSR_EF);
- fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr,
- ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth);
- regs->psr &= ~(PSR_EF);
- clear_tsk_thread_flag(current, TIF_USEDFPU);
- }
-#else
- if (current == last_task_used_math) {
- put_psr(get_psr() | PSR_EF);
- fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr,
- ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth);
- last_task_used_math = NULL;
- regs->psr &= ~(PSR_EF);
- }
-#endif
- err |= __copy_to_user(&fpu->si_float_regs[0],
- ¤t->thread.float_regs[0],
- (sizeof(unsigned long) * 32));
- err |= __put_user(current->thread.fsr, &fpu->si_fsr);
- err |= __put_user(current->thread.fpqdepth, &fpu->si_fpqdepth);
- if (current->thread.fpqdepth != 0)
- err |= __copy_to_user(&fpu->si_fpqueue[0],
- ¤t->thread.fpqueue[0],
- ((sizeof(unsigned long) +
- (sizeof(unsigned long *)))*16));
- clear_used_math();
- return err;
-}
-
static int setup_frame(struct k_sigaction *ka, struct pt_regs *regs,
int signo, sigset_t *oldset)
{
struct signal_frame __user *sf;
- int sigframe_size, err;
+ int sigframe_size, err, wsaved;
+ void __user *tail;
/* 1. Make sure everything is clean */
synchronize_user_stack();
- sigframe_size = SF_ALIGNEDSZ;
- if (!used_math())
- sigframe_size -= sizeof(__siginfo_fpu_t);
+ wsaved = current_thread_info()->w_saved;
+
+ sigframe_size = sizeof(*sf);
+ if (used_math())
+ sigframe_size += sizeof(__siginfo_fpu_t);
+ if (wsaved)
+ sigframe_size += sizeof(__siginfo_rwin_t);
sf = (struct signal_frame __user *)
get_sigframe(&ka->sa, regs, sigframe_size);
if (invalid_frame_pointer(sf, sigframe_size))
goto sigill_and_return;
- if (current_thread_info()->w_saved != 0)
- goto sigill_and_return;
+ tail = sf + 1;
/* 2. Save the current process state */
err = __copy_to_user(&sf->info.si_regs, regs, sizeof(struct pt_regs));
err |= __put_user(0, &sf->extra_size);
if (used_math()) {
- err |= save_fpu_state(regs, &sf->fpu_state);
- err |= __put_user(&sf->fpu_state, &sf->fpu_save);
+ __siginfo_fpu_t __user *fp = tail;
+ tail += sizeof(*fp);
+ err |= save_fpu_state(regs, fp);
+ err |= __put_user(fp, &sf->fpu_save);
} else {
err |= __put_user(0, &sf->fpu_save);
}
+ if (wsaved) {
+ __siginfo_rwin_t __user *rwp = tail;
+ tail += sizeof(*rwp);
+ err |= save_rwin_state(wsaved, rwp);
+ err |= __put_user(rwp, &sf->rwin_save);
+ } else {
+ err |= __put_user(0, &sf->rwin_save);
+ }
err |= __put_user(oldset->sig[0], &sf->info.si_mask);
err |= __copy_to_user(sf->extramask, &oldset->sig[1],
(_NSIG_WORDS - 1) * sizeof(unsigned int));
- err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP],
- sizeof(struct reg_window32));
+ if (!wsaved) {
+ err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP],
+ sizeof(struct reg_window32));
+ } else {
+ struct reg_window32 *rp;
+
+ rp = ¤t_thread_info()->reg_window[wsaved - 1];
+ err |= __copy_to_user(sf, rp, sizeof(struct reg_window32));
+ }
if (err)
goto sigsegv;
int signo, sigset_t *oldset, siginfo_t *info)
{
struct rt_signal_frame __user *sf;
- int sigframe_size;
+ int sigframe_size, wsaved;
+ void __user *tail;
unsigned int psr;
int err;
synchronize_user_stack();
- sigframe_size = RT_ALIGNEDSZ;
- if (!used_math())
- sigframe_size -= sizeof(__siginfo_fpu_t);
+ wsaved = current_thread_info()->w_saved;
+ sigframe_size = sizeof(*sf);
+ if (used_math())
+ sigframe_size += sizeof(__siginfo_fpu_t);
+ if (wsaved)
+ sigframe_size += sizeof(__siginfo_rwin_t);
sf = (struct rt_signal_frame __user *)
get_sigframe(&ka->sa, regs, sigframe_size);
if (invalid_frame_pointer(sf, sigframe_size))
goto sigill;
- if (current_thread_info()->w_saved != 0)
- goto sigill;
+ tail = sf + 1;
err = __put_user(regs->pc, &sf->regs.pc);
err |= __put_user(regs->npc, &sf->regs.npc);
err |= __put_user(regs->y, &sf->regs.y);
err |= __put_user(0, &sf->extra_size);
if (psr & PSR_EF) {
- err |= save_fpu_state(regs, &sf->fpu_state);
- err |= __put_user(&sf->fpu_state, &sf->fpu_save);
+ __siginfo_fpu_t *fp = tail;
+ tail += sizeof(*fp);
+ err |= save_fpu_state(regs, fp);
+ err |= __put_user(fp, &sf->fpu_save);
} else {
err |= __put_user(0, &sf->fpu_save);
}
+ if (wsaved) {
+ __siginfo_rwin_t *rwp = tail;
+ tail += sizeof(*rwp);
+ err |= save_rwin_state(wsaved, rwp);
+ err |= __put_user(rwp, &sf->rwin_save);
+ } else {
+ err |= __put_user(0, &sf->rwin_save);
+ }
err |= __copy_to_user(&sf->mask, &oldset->sig[0], sizeof(sigset_t));
/* Setup sigaltstack */
err |= __put_user(sas_ss_flags(regs->u_regs[UREG_FP]), &sf->stack.ss_flags);
err |= __put_user(current->sas_ss_size, &sf->stack.ss_size);
- err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP],
- sizeof(struct reg_window32));
+ if (!wsaved) {
+ err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP],
+ sizeof(struct reg_window32));
+ } else {
+ struct reg_window32 *rp;
+
+ rp = ¤t_thread_info()->reg_window[wsaved - 1];
+ err |= __copy_to_user(sf, rp, sizeof(struct reg_window32));
+ }
err |= copy_siginfo_to_user(&sf->info, info);
#include "entry.h"
#include "systbls.h"
+#include "sigutil.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
__siginfo_fpu_t __user *fpu_save;
stack_t stack;
sigset_t mask;
- __siginfo_fpu_t fpu_state;
+ __siginfo_rwin_t *rwin_save;
};
static long _sigpause_common(old_sigset_t set)
return _sigpause_common(set);
}
-static inline int
-restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
-{
- unsigned long *fpregs = current_thread_info()->fpregs;
- unsigned long fprs;
- int err;
-
- err = __get_user(fprs, &fpu->si_fprs);
- fprs_write(0);
- regs->tstate &= ~TSTATE_PEF;
- if (fprs & FPRS_DL)
- err |= copy_from_user(fpregs, &fpu->si_float_regs[0],
- (sizeof(unsigned int) * 32));
- if (fprs & FPRS_DU)
- err |= copy_from_user(fpregs+16, &fpu->si_float_regs[32],
- (sizeof(unsigned int) * 32));
- err |= __get_user(current_thread_info()->xfsr[0], &fpu->si_fsr);
- err |= __get_user(current_thread_info()->gsr[0], &fpu->si_gsr);
- current_thread_info()->fpsaved[0] |= fprs;
- return err;
-}
-
void do_rt_sigreturn(struct pt_regs *regs)
{
struct rt_signal_frame __user *sf;
unsigned long tpc, tnpc, tstate;
__siginfo_fpu_t __user *fpu_save;
+ __siginfo_rwin_t __user *rwin_save;
sigset_t set;
int err;
regs->tstate |= (tstate & (TSTATE_ASI | TSTATE_ICC | TSTATE_XCC));
err |= __get_user(fpu_save, &sf->fpu_save);
- if (fpu_save)
- err |= restore_fpu_state(regs, &sf->fpu_state);
+ if (!err && fpu_save)
+ err |= restore_fpu_state(regs, fpu_save);
err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t));
err |= do_sigaltstack(&sf->stack, NULL, (unsigned long)sf);
if (err)
goto segv;
+ err |= __get_user(rwin_save, &sf->rwin_save);
+ if (!err && rwin_save) {
+ if (restore_rwin_state(rwin_save))
+ goto segv;
+ }
+
regs->tpc = tpc;
regs->tnpc = tnpc;
}
/* Checks if the fp is valid */
-static int invalid_frame_pointer(void __user *fp, int fplen)
+static int invalid_frame_pointer(void __user *fp)
{
if (((unsigned long) fp) & 15)
return 1;
return 0;
}
-static inline int
-save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
-{
- unsigned long *fpregs = current_thread_info()->fpregs;
- unsigned long fprs;
- int err = 0;
-
- fprs = current_thread_info()->fpsaved[0];
- if (fprs & FPRS_DL)
- err |= copy_to_user(&fpu->si_float_regs[0], fpregs,
- (sizeof(unsigned int) * 32));
- if (fprs & FPRS_DU)
- err |= copy_to_user(&fpu->si_float_regs[32], fpregs+16,
- (sizeof(unsigned int) * 32));
- err |= __put_user(current_thread_info()->xfsr[0], &fpu->si_fsr);
- err |= __put_user(current_thread_info()->gsr[0], &fpu->si_gsr);
- err |= __put_user(fprs, &fpu->si_fprs);
-
- return err;
-}
-
static inline void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, unsigned long framesize)
{
unsigned long sp = regs->u_regs[UREG_FP] + STACK_BIAS;
int signo, sigset_t *oldset, siginfo_t *info)
{
struct rt_signal_frame __user *sf;
- int sigframe_size, err;
+ int wsaved, err, sf_size;
+ void __user *tail;
/* 1. Make sure everything is clean */
synchronize_user_stack();
save_and_clear_fpu();
- sigframe_size = sizeof(struct rt_signal_frame);
- if (!(current_thread_info()->fpsaved[0] & FPRS_FEF))
- sigframe_size -= sizeof(__siginfo_fpu_t);
+ wsaved = get_thread_wsaved();
+ sf_size = sizeof(struct rt_signal_frame);
+ if (current_thread_info()->fpsaved[0] & FPRS_FEF)
+ sf_size += sizeof(__siginfo_fpu_t);
+ if (wsaved)
+ sf_size += sizeof(__siginfo_rwin_t);
sf = (struct rt_signal_frame __user *)
- get_sigframe(ka, regs, sigframe_size);
-
- if (invalid_frame_pointer (sf, sigframe_size))
- goto sigill;
+ get_sigframe(ka, regs, sf_size);
- if (get_thread_wsaved() != 0)
+ if (invalid_frame_pointer (sf))
goto sigill;
+ tail = (sf + 1);
+
/* 2. Save the current process state */
err = copy_to_user(&sf->regs, regs, sizeof (*regs));
if (current_thread_info()->fpsaved[0] & FPRS_FEF) {
- err |= save_fpu_state(regs, &sf->fpu_state);
- err |= __put_user((u64)&sf->fpu_state, &sf->fpu_save);
+ __siginfo_fpu_t __user *fpu_save = tail;
+ tail += sizeof(__siginfo_fpu_t);
+ err |= save_fpu_state(regs, fpu_save);
+ err |= __put_user((u64)fpu_save, &sf->fpu_save);
} else {
err |= __put_user(0, &sf->fpu_save);
}
+ if (wsaved) {
+ __siginfo_rwin_t __user *rwin_save = tail;
+ tail += sizeof(__siginfo_rwin_t);
+ err |= save_rwin_state(wsaved, rwin_save);
+ err |= __put_user((u64)rwin_save, &sf->rwin_save);
+ set_thread_wsaved(0);
+ } else {
+ err |= __put_user(0, &sf->rwin_save);
+ }
/* Setup sigaltstack */
err |= __put_user(current->sas_ss_sp, &sf->stack.ss_sp);
err |= copy_to_user(&sf->mask, oldset, sizeof(sigset_t));
- err |= copy_in_user((u64 __user *)sf,
- (u64 __user *)(regs->u_regs[UREG_FP]+STACK_BIAS),
- sizeof(struct reg_window));
+ if (!wsaved) {
+ err |= copy_in_user((u64 __user *)sf,
+ (u64 __user *)(regs->u_regs[UREG_FP] +
+ STACK_BIAS),
+ sizeof(struct reg_window));
+ } else {
+ struct reg_window *rp;
+ rp = ¤t_thread_info()->reg_window[wsaved - 1];
+ err |= copy_to_user(sf, rp, sizeof(struct reg_window));
+ }
if (info)
err |= copy_siginfo_to_user(&sf->info, info);
else {
--- /dev/null
+#ifndef _SIGUTIL_H
+#define _SIGUTIL_H
+
+int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu);
+int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu);
+int save_rwin_state(int wsaved, __siginfo_rwin_t __user *rwin);
+int restore_rwin_state(__siginfo_rwin_t __user *rp);
+
+#endif /* _SIGUTIL_H */
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/thread_info.h>
+#include <linux/uaccess.h>
+#include <linux/sched.h>
+
+#include <asm/sigcontext.h>
+#include <asm/fpumacro.h>
+#include <asm/ptrace.h>
+
+#include "sigutil.h"
+
+int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
+{
+ int err = 0;
+#ifdef CONFIG_SMP
+ if (test_tsk_thread_flag(current, TIF_USEDFPU)) {
+ put_psr(get_psr() | PSR_EF);
+ fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr,
+ ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth);
+ regs->psr &= ~(PSR_EF);
+ clear_tsk_thread_flag(current, TIF_USEDFPU);
+ }
+#else
+ if (current == last_task_used_math) {
+ put_psr(get_psr() | PSR_EF);
+ fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr,
+ ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth);
+ last_task_used_math = NULL;
+ regs->psr &= ~(PSR_EF);
+ }
+#endif
+ err |= __copy_to_user(&fpu->si_float_regs[0],
+ ¤t->thread.float_regs[0],
+ (sizeof(unsigned long) * 32));
+ err |= __put_user(current->thread.fsr, &fpu->si_fsr);
+ err |= __put_user(current->thread.fpqdepth, &fpu->si_fpqdepth);
+ if (current->thread.fpqdepth != 0)
+ err |= __copy_to_user(&fpu->si_fpqueue[0],
+ ¤t->thread.fpqueue[0],
+ ((sizeof(unsigned long) +
+ (sizeof(unsigned long *)))*16));
+ clear_used_math();
+ return err;
+}
+
+int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
+{
+ int err;
+#ifdef CONFIG_SMP
+ if (test_tsk_thread_flag(current, TIF_USEDFPU))
+ regs->psr &= ~PSR_EF;
+#else
+ if (current == last_task_used_math) {
+ last_task_used_math = NULL;
+ regs->psr &= ~PSR_EF;
+ }
+#endif
+ set_used_math();
+ clear_tsk_thread_flag(current, TIF_USEDFPU);
+
+ if (!access_ok(VERIFY_READ, fpu, sizeof(*fpu)))
+ return -EFAULT;
+
+ err = __copy_from_user(¤t->thread.float_regs[0], &fpu->si_float_regs[0],
+ (sizeof(unsigned long) * 32));
+ err |= __get_user(current->thread.fsr, &fpu->si_fsr);
+ err |= __get_user(current->thread.fpqdepth, &fpu->si_fpqdepth);
+ if (current->thread.fpqdepth != 0)
+ err |= __copy_from_user(¤t->thread.fpqueue[0],
+ &fpu->si_fpqueue[0],
+ ((sizeof(unsigned long) +
+ (sizeof(unsigned long *)))*16));
+ return err;
+}
+
+int save_rwin_state(int wsaved, __siginfo_rwin_t __user *rwin)
+{
+ int i, err = __put_user(wsaved, &rwin->wsaved);
+
+ for (i = 0; i < wsaved; i++) {
+ struct reg_window32 *rp;
+ unsigned long fp;
+
+ rp = ¤t_thread_info()->reg_window[i];
+ fp = current_thread_info()->rwbuf_stkptrs[i];
+ err |= copy_to_user(&rwin->reg_window[i], rp,
+ sizeof(struct reg_window32));
+ err |= __put_user(fp, &rwin->rwbuf_stkptrs[i]);
+ }
+ return err;
+}
+
+int restore_rwin_state(__siginfo_rwin_t __user *rp)
+{
+ struct thread_info *t = current_thread_info();
+ int i, wsaved, err;
+
+ __get_user(wsaved, &rp->wsaved);
+ if (wsaved > NSWINS)
+ return -EFAULT;
+
+ err = 0;
+ for (i = 0; i < wsaved; i++) {
+ err |= copy_from_user(&t->reg_window[i],
+ &rp->reg_window[i],
+ sizeof(struct reg_window32));
+ err |= __get_user(t->rwbuf_stkptrs[i],
+ &rp->rwbuf_stkptrs[i]);
+ }
+ if (err)
+ return err;
+
+ t->w_saved = wsaved;
+ synchronize_user_stack();
+ if (t->w_saved)
+ return -EFAULT;
+ return 0;
+
+}
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/thread_info.h>
+#include <linux/uaccess.h>
+
+#include <asm/sigcontext.h>
+#include <asm/fpumacro.h>
+#include <asm/ptrace.h>
+
+#include "sigutil.h"
+
+int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
+{
+ unsigned long *fpregs = current_thread_info()->fpregs;
+ unsigned long fprs;
+ int err = 0;
+
+ fprs = current_thread_info()->fpsaved[0];
+ if (fprs & FPRS_DL)
+ err |= copy_to_user(&fpu->si_float_regs[0], fpregs,
+ (sizeof(unsigned int) * 32));
+ if (fprs & FPRS_DU)
+ err |= copy_to_user(&fpu->si_float_regs[32], fpregs+16,
+ (sizeof(unsigned int) * 32));
+ err |= __put_user(current_thread_info()->xfsr[0], &fpu->si_fsr);
+ err |= __put_user(current_thread_info()->gsr[0], &fpu->si_gsr);
+ err |= __put_user(fprs, &fpu->si_fprs);
+
+ return err;
+}
+
+int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
+{
+ unsigned long *fpregs = current_thread_info()->fpregs;
+ unsigned long fprs;
+ int err;
+
+ err = __get_user(fprs, &fpu->si_fprs);
+ fprs_write(0);
+ regs->tstate &= ~TSTATE_PEF;
+ if (fprs & FPRS_DL)
+ err |= copy_from_user(fpregs, &fpu->si_float_regs[0],
+ (sizeof(unsigned int) * 32));
+ if (fprs & FPRS_DU)
+ err |= copy_from_user(fpregs+16, &fpu->si_float_regs[32],
+ (sizeof(unsigned int) * 32));
+ err |= __get_user(current_thread_info()->xfsr[0], &fpu->si_fsr);
+ err |= __get_user(current_thread_info()->gsr[0], &fpu->si_gsr);
+ current_thread_info()->fpsaved[0] |= fprs;
+ return err;
+}
+
+int save_rwin_state(int wsaved, __siginfo_rwin_t __user *rwin)
+{
+ int i, err = __put_user(wsaved, &rwin->wsaved);
+
+ for (i = 0; i < wsaved; i++) {
+ struct reg_window *rp = ¤t_thread_info()->reg_window[i];
+ unsigned long fp = current_thread_info()->rwbuf_stkptrs[i];
+
+ err |= copy_to_user(&rwin->reg_window[i], rp,
+ sizeof(struct reg_window));
+ err |= __put_user(fp, &rwin->rwbuf_stkptrs[i]);
+ }
+ return err;
+}
+
+int restore_rwin_state(__siginfo_rwin_t __user *rp)
+{
+ struct thread_info *t = current_thread_info();
+ int i, wsaved, err;
+
+ __get_user(wsaved, &rp->wsaved);
+ if (wsaved > NSWINS)
+ return -EFAULT;
+
+ err = 0;
+ for (i = 0; i < wsaved; i++) {
+ err |= copy_from_user(&t->reg_window[i],
+ &rp->reg_window[i],
+ sizeof(struct reg_window));
+ err |= __get_user(t->rwbuf_stkptrs[i],
+ &rp->rwbuf_stkptrs[i]);
+ }
+ if (err)
+ return err;
+
+ set_thread_wsaved(wsaved);
+ synchronize_user_stack();
+ if (get_thread_wsaved())
+ return -EFAULT;
+ return 0;
+}
SIGN2(sys32_fadvise64_64, compat_sys_fadvise64_64, %o0, %o5)
SIGN2(sys32_bdflush, sys_bdflush, %o0, %o1)
SIGN1(sys32_mlockall, sys_mlockall, %o0)
-SIGN1(sys32_nfsservctl, compat_sys_nfsservctl, %o0)
SIGN1(sys32_clock_nanosleep, compat_sys_clock_nanosleep, %o1)
SIGN1(sys32_timer_settime, compat_sys_timer_settime, %o1)
SIGN1(sys32_io_submit, compat_sys_io_submit, %o1)
/*235*/ .long sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
/*240*/ .long sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
/*245*/ .long sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep
-/*250*/ .long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
+/*250*/ .long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_ni_syscall
/*255*/ .long sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep
/*260*/ .long sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun
/*265*/ .long sys_timer_delete, sys_timer_create, sys_nis_syscall, sys_io_setup, sys_io_destroy
.word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall
/*240*/ .word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler
.word sys_sched_yield, sys32_sched_get_priority_max, sys32_sched_get_priority_min, sys32_sched_rr_get_interval, compat_sys_nanosleep
-/*250*/ .word sys_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl
+/*250*/ .word sys_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys_nis_syscall
.word sys32_sync_file_range, compat_sys_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep
/*260*/ .word compat_sys_sched_getaffinity, compat_sys_sched_setaffinity, sys32_timer_settime, compat_sys_timer_gettime, sys_timer_getoverrun
.word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy
.word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
/*240*/ .word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
.word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep
-/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
+/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nis_syscall
.word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep
/*260*/ .word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun
.word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy
for (i = 0; i < prom_trans_ents; i++)
prom_trans[i].data &= ~0x0003fe0000000000UL;
}
+
+ /* Force execute bit on. */
+ for (i = 0; i < prom_trans_ents; i++)
+ prom_trans[i].data |= (tlb_type == hypervisor ?
+ _PAGE_EXEC_4V : _PAGE_EXEC_4U);
}
static void __init hypervisor_tlb_lock(unsigned long vaddr,
bool
default n
+config CMPXCHG_DOUBLE
+ bool
+ default n
+
source "arch/x86/Kconfig.cpu"
endmenu
KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \
$(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \
-Din6addr_loopback=kernel_in6addr_loopback \
- -Din6addr_any=kernel_in6addr_any
+ -Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr
KBUILD_AFLAGS += $(ARCH_INCLUDE)
* is done under a spinlock. Checking whether the device is in use is
* line->tty->count > 1, also under the spinlock.
*
- * tty->count serves to decide whether the device should be enabled or
- * disabled on the host. If it's equal to 1, then we are doing the
+ * line->count serves to decide whether the device should be enabled or
+ * disabled on the host. If it's equal to 0, then we are doing the
* first open or last close. Otherwise, open and close just return.
*/
goto out_unlock;
err = 0;
- if (tty->count > 1)
+ if (line->count++)
goto out_unlock;
- spin_unlock(&line->count_lock);
-
+ BUG_ON(tty->driver_data);
tty->driver_data = line;
line->tty = tty;
+ spin_unlock(&line->count_lock);
err = enable_chan(line);
- if (err)
+ if (err) /* line_close() will be called by our caller */
return err;
INIT_DELAYED_WORK(&line->task, line_timer_cb);
chan_window_size(&line->chan_list, &tty->winsize.ws_row,
&tty->winsize.ws_col);
- return err;
+ return 0;
out_unlock:
spin_unlock(&line->count_lock);
flush_buffer(line);
spin_lock(&line->count_lock);
- if (!line->valid)
- goto out_unlock;
+ BUG_ON(!line->valid);
- if (tty->count > 1)
+ if (--line->count)
goto out_unlock;
- spin_unlock(&line->count_lock);
-
line->tty = NULL;
tty->driver_data = NULL;
+ spin_unlock(&line->count_lock);
+
if (line->sigio) {
unregister_winch(tty);
line->sigio = 0;
spin_lock(&line->count_lock);
- if (line->tty != NULL) {
+ if (line->count) {
*error_out = "Device is already open";
goto out;
}
int pid;
struct tty_struct *tty;
unsigned long stack;
+ struct work_struct work;
};
-static void free_winch(struct winch *winch, int free_irq_ok)
+static void __free_winch(struct work_struct *work)
{
- if (free_irq_ok)
- free_irq(WINCH_IRQ, winch);
-
- list_del(&winch->list);
+ struct winch *winch = container_of(work, struct winch, work);
+ free_irq(WINCH_IRQ, winch);
if (winch->pid != -1)
os_kill_process(winch->pid, 1);
- if (winch->fd != -1)
- os_close_file(winch->fd);
if (winch->stack != 0)
free_stack(winch->stack, 0);
kfree(winch);
}
+static void free_winch(struct winch *winch)
+{
+ int fd = winch->fd;
+ winch->fd = -1;
+ if (fd != -1)
+ os_close_file(fd);
+ list_del(&winch->list);
+ __free_winch(&winch->work);
+}
+
static irqreturn_t winch_interrupt(int irq, void *data)
{
struct winch *winch = data;
struct tty_struct *tty;
struct line *line;
+ int fd = winch->fd;
int err;
char c;
- if (winch->fd != -1) {
- err = generic_read(winch->fd, &c, NULL);
+ if (fd != -1) {
+ err = generic_read(fd, &c, NULL);
if (err < 0) {
if (err != -EAGAIN) {
+ winch->fd = -1;
+ list_del(&winch->list);
+ os_close_file(fd);
printk(KERN_ERR "winch_interrupt : "
"read failed, errno = %d\n", -err);
printk(KERN_ERR "fd %d is losing SIGWINCH "
"support\n", winch->tty_fd);
- free_winch(winch, 0);
+ INIT_WORK(&winch->work, __free_winch);
+ schedule_work(&winch->work);
return IRQ_HANDLED;
}
goto out;
list_for_each_safe(ele, next, &winch_handlers) {
winch = list_entry(ele, struct winch, list);
if (winch->tty == tty) {
- free_winch(winch, 1);
+ free_winch(winch);
break;
}
}
list_for_each_safe(ele, next, &winch_handlers) {
winch = list_entry(ele, struct winch, list);
- free_winch(winch, 1);
+ free_winch(winch);
}
spin_unlock(&winch_handler_lock);
err = -errno;
printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n",
errno);
+ close(fd);
return err;
}
close(fd);
unsigned long addr, unsigned long data);
extern unsigned long getreg(struct task_struct *child, int regno);
extern int putreg(struct task_struct *child, int regno, unsigned long value);
-extern int get_fpregs(struct user_i387_struct __user *buf,
- struct task_struct *child);
-extern int set_fpregs(struct user_i387_struct __user *buf,
- struct task_struct *child);
extern int arch_copy_tls(struct task_struct *new);
extern void clear_flushed_tls(struct task_struct *task);
struct line {
struct tty_struct *tty;
spinlock_t count_lock;
+ unsigned long count;
int valid;
char *init_str;
extern int save_registers(int pid, struct uml_pt_regs *regs);
extern int restore_registers(int pid, struct uml_pt_regs *regs);
extern int init_registers(int pid);
-extern void get_safe_registers(unsigned long *regs);
+extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
extern int get_fp_registers(int pid, unsigned long *regs);
extern int put_fp_registers(int pid, unsigned long *regs);
arch_copy_thread(¤t->thread.arch, &p->thread.arch);
}
else {
- get_safe_registers(p->thread.regs.regs.gp);
+ get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp);
p->thread.request.u.thread = current->thread.request.u.thread;
handler = new_thread_handler;
}
void __user *vp = p;
switch (request) {
- /* read word at location addr. */
- case PTRACE_PEEKTEXT:
- case PTRACE_PEEKDATA:
- ret = generic_ptrace_peekdata(child, addr, data);
- break;
-
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR:
ret = peek_user(child, addr, data);
break;
- /* write the word at location addr. */
- case PTRACE_POKETEXT:
- case PTRACE_POKEDATA:
- ret = generic_ptrace_pokedata(child, addr, data);
- break;
-
/* write the word at location addr in the USER area */
case PTRACE_POKEUSR:
ret = poke_user(child, addr, data);
ret = 0;
break;
}
-#endif
-#ifdef PTRACE_GETFPREGS
- case PTRACE_GETFPREGS: /* Get the child FPU state. */
- ret = get_fpregs(vp, child);
- break;
-#endif
-#ifdef PTRACE_SETFPREGS
- case PTRACE_SETFPREGS: /* Set the child FPU state. */
- ret = set_fpregs(vp, child);
- break;
#endif
case PTRACE_GET_THREAD_AREA:
ret = ptrace_get_thread_area(child, addr, vp);
ret = -EIO;
break;
}
-#endif
-#ifdef PTRACE_ARCH_PRCTL
- case PTRACE_ARCH_PRCTL:
- /* XXX Calls ptrace on the host - needs some SMP thinking */
- ret = arch_prctl(child, data, (void __user *) addr);
- break;
#endif
default:
ret = ptrace_request(child, request, addr, data);
#include <string.h>
#include <sys/ptrace.h>
#include "sysdep/ptrace.h"
+#include "sysdep/ptrace_user.h"
+#include "registers.h"
int save_registers(int pid, struct uml_pt_regs *regs)
{
/* This is set once at boot time and not changed thereafter */
static unsigned long exec_regs[MAX_REG_NR];
+static unsigned long exec_fp_regs[FP_SIZE];
int init_registers(int pid)
{
return -errno;
arch_init_registers(pid);
+ get_fp_registers(pid, exec_fp_regs);
return 0;
}
-void get_safe_registers(unsigned long *regs)
+void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
{
memcpy(regs, exec_regs, sizeof(exec_regs));
+
+ if (fp_regs)
+ memcpy(fp_regs, exec_fp_regs, sizeof(exec_fp_regs));
}
static int __init init_syscall_regs(void)
{
- get_safe_registers(syscall_regs);
+ get_safe_registers(syscall_regs, NULL);
syscall_regs[REGS_IP_INDEX] = STUB_CODE +
((unsigned long) &batch_syscall_stub -
(unsigned long) &__syscall_stub_start);
if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp))
fatal_sigsegv();
+ if (put_fp_registers(pid, regs->fp))
+ fatal_sigsegv();
+
/* Now we set local_using_sysemu to be used for one loop */
local_using_sysemu = get_using_sysemu();
fatal_sigsegv();
}
+ if (get_fp_registers(pid, regs->fp)) {
+ printk(UM_KERN_ERR "userspace - get_fp_registers failed, "
+ "errno = %d\n", errno);
+ fatal_sigsegv();
+ }
+
UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
if (WIFSTOPPED(status)) {
}
static unsigned long thread_regs[MAX_REG_NR];
+static unsigned long thread_fp_regs[FP_SIZE];
static int __init init_thread_regs(void)
{
- get_safe_registers(thread_regs);
+ get_safe_registers(thread_regs, thread_fp_regs);
/* Set parent's instruction pointer to start of clone-stub */
thread_regs[REGS_IP_INDEX] = STUB_CODE +
(unsigned long) stub_clone_handler -
return err;
}
+ err = put_fp_registers(pid, thread_fp_regs);
+ if (err < 0) {
+ printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers "
+ "failed, pid = %d, err = %d\n", pid, err);
+ return err;
+ }
+
/* set a well known return code for detection of child write failure */
child_data->err = 12345678;
*/
struct user_desc;
-extern int get_fpxregs(struct user_fxsr_struct __user *buf,
- struct task_struct *child);
-extern int set_fpxregs(struct user_fxsr_struct __user *buf,
- struct task_struct *tsk);
-
extern int ptrace_get_thread_area(struct task_struct *child, int idx,
struct user_desc __user *user_desc);
return put_user(tmp, (unsigned long __user *) data);
}
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_i387_struct fpregs;
return n;
}
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_i387_struct fpregs;
(unsigned long *) &fpregs);
}
-int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_fxsr_struct fpregs;
return n;
}
-int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_fxsr_struct fpregs;
long subarch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
- return -EIO;
+ int ret = -EIO;
+ void __user *datap = (void __user *) data;
+ switch (request) {
+ case PTRACE_GETFPREGS: /* Get the child FPU state. */
+ ret = get_fpregs(datap, child);
+ break;
+ case PTRACE_SETFPREGS: /* Set the child FPU state. */
+ ret = set_fpregs(datap, child);
+ break;
+ case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+ ret = get_fpxregs(datap, child);
+ break;
+ case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+ ret = set_fpxregs(datap, child);
+ break;
+ default:
+ ret = -EIO;
+ }
+ return ret;
}
struct uml_pt_regs {
unsigned long gp[MAX_REG_NR];
+ unsigned long fp[HOST_FPX_SIZE];
struct faultinfo faultinfo;
long syscall;
int is_user;
return instr == 0x050f;
}
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
long fpregs[HOST_FP_SIZE];
return n;
}
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
long fpregs[HOST_FP_SIZE];
void __user *datap = (void __user *) data;
switch (request) {
- case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+ case PTRACE_GETFPREGS: /* Get the child FPU state. */
ret = get_fpregs(datap, child);
break;
- case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+ case PTRACE_SETFPREGS: /* Set the child FPU state. */
ret = set_fpregs(datap, child);
break;
+ case PTRACE_ARCH_PRCTL:
+ /* XXX Calls ptrace on the host - needs some SMP thinking */
+ ret = arch_prctl(child, data, (void __user *) addr);
+ break;
}
return ret;
struct uml_pt_regs {
unsigned long gp[MAX_REG_NR];
+ unsigned long fp[HOST_FP_SIZE];
struct faultinfo faultinfo;
long syscall;
int is_user;
.quad sys32_vm86_warning /* vm86 */
.quad quiet_ni_syscall /* query_module */
.quad sys_poll
- .quad compat_sys_nfsservctl
+ .quad quiet_ni_syscall /* old nfsservctl */
.quad sys_setresgid16 /* 170 */
.quad sys_getresgid16
.quad sys_prctl
#endif
.macro altinstruction_entry orig alt feature orig_len alt_len
- .align 8
.long \orig - .
.long \alt - .
.word \feature
u16 cpuid; /* cpuid bit set for replacement */
u8 instrlen; /* length of original instruction */
u8 replacementlen; /* length of new instruction, <= instrlen */
-#ifdef CONFIG_X86_64
- u32 pad2;
-#endif
};
extern void alternative_instructions(void);
\
"661:\n\t" oldinstr "\n662:\n" \
".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
" .long 661b - .\n" /* label */ \
" .long 663f - .\n" /* new instruction */ \
" .word " __stringify(feature) "\n" /* feature bit */ \
asm goto("1: jmp %l[t_no]\n"
"2:\n"
".section .altinstructions,\"a\"\n"
- _ASM_ALIGN "\n"
" .long 1b - .\n"
" .long 0\n" /* no replacement */
" .word %P0\n" /* feature bit */
asm volatile("1: movb $0,%0\n"
"2:\n"
".section .altinstructions,\"a\"\n"
- _ASM_ALIGN "\n"
" .long 1b - .\n"
" .long 3f - .\n"
" .word %P1\n" /* feature bit */
: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
#elif defined(__x86_64__)
__asm__ (
- "mul %[mul_frac] ; shrd $32, %[hi], %[lo]"
+ "mulq %[mul_frac] ; shrd $32, %[hi], %[lo]"
: [lo]"=a"(product),
[hi]"=d"(tmp)
: "0"(delta),
__SYSCALL(__NR_quotactl, sys_quotactl)
#define __NR_nfsservctl 180
-__SYSCALL(__NR_nfsservctl, sys_nfsservctl)
+__SYSCALL(__NR_nfsservctl, sys_ni_syscall)
/* reserved for LiS/STREAMS */
#define __NR_getpmsg 181
((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
APIC_DM_INIT;
uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
- mdelay(10);
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
(phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
*/
static int mtrr_rendezvous_handler(void *info)
{
-#ifdef CONFIG_SMP
struct set_mtrr_data *data = info;
/*
} else if (mtrr_aps_delayed_init || !cpu_online(smp_processor_id())) {
mtrr_if->set_all();
}
-#endif
return 0;
}
perf_callchain_store(entry, regs->ip);
+ if (!current->mm)
+ return;
+
if (perf_callchain_user32(regs, entry))
return;
#include <asm/ftrace.h>
#include <asm/irq_vectors.h>
#include <asm/cpufeature.h>
+#include <asm/alternative-asm.h>
/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
#include <linux/elf-em.h>
661: pushl_cfi $do_general_protection
662:
.section .altinstructions,"a"
- .balign 4
- .long 661b
- .long 663f
- .word X86_FEATURE_XMM
- .byte 662b-661b
- .byte 664f-663f
+ altinstruction_entry 661b, 663f, X86_FEATURE_XMM, 662b-661b, 664f-663f
.previous
.section .altinstr_replacement,"ax"
663: pushl $do_simd_coprocessor_error
{
int real_seconds, real_minutes, cmos_minutes;
unsigned char save_control, save_freq_select;
+ unsigned long flags;
int retval = 0;
+ spin_lock_irqsave(&rtc_lock, flags);
+
/* tell the clock it's being set */
save_control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
return retval;
}
unsigned long mach_get_cmos_time(void)
{
unsigned int status, year, mon, day, hour, min, sec, century = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc_lock, flags);
/*
* If UIP is clear, then we have >= 244 microseconds before
status = CMOS_READ(RTC_CONTROL);
WARN_ON_ONCE(RTC_ALWAYS_BCD && (status & RTC_DM_BINARY));
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
if (RTC_ALWAYS_BCD || !(status & RTC_DM_BINARY)) {
sec = bcd2bin(sec);
min = bcd2bin(min);
int update_persistent_clock(struct timespec now)
{
- unsigned long flags;
- int retval;
-
- spin_lock_irqsave(&rtc_lock, flags);
- retval = x86_platform.set_wallclock(now.tv_sec);
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return retval;
+ return x86_platform.set_wallclock(now.tv_sec);
}
/* not static: needed by APM */
void read_persistent_clock(struct timespec *ts)
{
- unsigned long retval, flags;
+ unsigned long retval;
- spin_lock_irqsave(&rtc_lock, flags);
retval = x86_platform.get_wallclock();
- spin_unlock_irqrestore(&rtc_lock, flags);
ts->tv_sec = retval;
ts->tv_nsec = 0;
.long ptregs_vm86
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* Old nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
break;
case Src2CL:
ctxt->src2.bytes = 1;
- ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8;
+ ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
break;
case Src2ImmByte:
rc = decode_imm(ctxt, &ctxt->src2, 1, true);
/* xchg acts as a barrier before the setting of the high bits */
orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low);
- orig.spte_high = ssptep->spte_high = sspte.spte_high;
+ orig.spte_high = ssptep->spte_high;
+ ssptep->spte_high = sspte.spte_high;
count_spte_clear(sptep, spte);
return orig.spte;
*/
if (bus) {
struct pci_bus *child;
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child, child->self->pcie_mpss);
+ list_for_each_entry(child, &bus->children, node) {
+ struct pci_dev *self = child->self;
+ if (!self)
+ continue;
+
+ pcie_bus_configure_settings(child, self->pcie_mpss);
+ }
}
if (!bus)
irq_attr.trigger = 1;
irq_attr.polarity = 1;
io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr);
- }
+ } else
+ pentry->irq = 0; /* No irq */
+
switch (pentry->type) {
case SFI_DEV_TYPE_IPC:
/* ID as IRQ is a hack that will go away */
unsigned long vrtc_get_time(void)
{
u8 sec, min, hour, mday, mon;
+ unsigned long flags;
u32 year;
+ spin_lock_irqsave(&rtc_lock, flags);
+
while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
cpu_relax();
mon = vrtc_cmos_read(RTC_MONTH);
year = vrtc_cmos_read(RTC_YEAR);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
/* vRTC YEAR reg contains the offset to 1960 */
year += 1960;
int vrtc_set_mmss(unsigned long nowtime)
{
int real_sec, real_min;
+ unsigned long flags;
int vrtc_min;
+ spin_lock_irqsave(&rtc_lock, flags);
vrtc_min = vrtc_cmos_read(RTC_MINUTES);
real_sec = nowtime % 60;
vrtc_cmos_write(real_sec, RTC_SECONDS);
vrtc_cmos_write(real_min, RTC_MINUTES);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
return 0;
}
if (inbuf && inlen) {
/* write data to EC */
for (i = 0; i < inlen; i++) {
+ pr_devel("olpc-ec: sending cmd arg 0x%x\n", inbuf[i]);
+ outb(inbuf[i], 0x68);
if (wait_on_ibf(0x6c, 0)) {
printk(KERN_ERR "olpc-ec: timeout waiting for"
" EC accept data!\n");
goto err;
}
- pr_devel("olpc-ec: sending cmd arg 0x%x\n", inbuf[i]);
- outb(inbuf[i], 0x68);
}
}
if (outbuf && outlen) {
.space 7,0x90
/* 14: System call restart point is here! (SYSENTER_RETURN-2) */
- jmp .Lenter_kernel
+ int $0x80
/* 16: System call normal return point is here! */
VDSO32_SYSENTER_RETURN: /* Symbol used by sysenter.c via vdso32-syms.h */
pop %ebp
machine_to_phys_nr = MACH2PHYS_NR_ENTRIES;
}
#ifdef CONFIG_X86_32
- if ((machine_to_phys_mapping + machine_to_phys_nr)
- < machine_to_phys_mapping)
- machine_to_phys_nr = (unsigned long *)NULL
- - machine_to_phys_mapping;
+ WARN_ON((machine_to_phys_mapping + (machine_to_phys_nr - 1))
+ < machine_to_phys_mapping);
#endif
}
PFN_UP(start_pci), PFN_DOWN(last));
return identity;
}
+
+static unsigned long __init xen_get_max_pages(void)
+{
+ unsigned long max_pages = MAX_DOMAIN_PAGES;
+ domid_t domid = DOMID_SELF;
+ int ret;
+
+ ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
+ if (ret > 0)
+ max_pages = ret;
+ return min(max_pages, MAX_DOMAIN_PAGES);
+}
+
/**
* machine_specific_memory_setup - Hook for machine specific memory setup.
**/
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+ extra_limit = xen_get_max_pages();
+ if (max_pfn + extra_pages > extra_limit) {
+ if (extra_limit > max_pfn)
+ extra_pages = extra_limit - max_pfn;
+ else
+ extra_pages = 0;
+ }
+
extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820);
/*
#include <xen/page.h>
#include <xen/events.h>
+#include <xen/hvc-console.h>
#include "xen-ops.h"
#include "mmu.h"
unsigned cpu;
unsigned int i;
+ if (skip_ioapic_setup) {
+ char *m = (max_cpus == 0) ?
+ "The nosmp parameter is incompatible with Xen; " \
+ "use Xen dom0_max_vcpus=1 parameter" :
+ "The noapic parameter is incompatible with Xen";
+
+ xen_raw_printk(m);
+ panic(m);
+ }
xen_init_lock_cpu(0);
smp_store_cpu_info(0);
WARN_ON(xen_smp_intr_init(0));
xen_init_lock_cpu(0);
- xen_init_spinlocks();
}
static int __cpuinit xen_hvm_cpu_up(unsigned int cpu)
struct pvclock_vcpu_time_info *src;
cycle_t ret;
- src = &get_cpu_var(xen_vcpu)->time;
+ preempt_disable_notrace();
+ src = &__get_cpu_var(xen_vcpu)->time;
ret = pvclock_clocksource_read(src);
- put_cpu_var(xen_vcpu);
+ preempt_enable_notrace();
return ret;
}
/*
* If there's something pending, mask events again so we can
- * jump back into xen_hypervisor_callback
+ * jump back into xen_hypervisor_callback. Otherwise do not
+ * touch XEN_vcpu_info_mask.
*/
- sete XEN_vcpu_info_mask(%eax)
+ jne 1f
+ movb $1, XEN_vcpu_info_mask(%eax)
- popl %eax
+1: popl %eax
/*
* From this point on the registers are restored and the stack
#define __NR_quotactl 204
__SYSCALL(204, sys_quotactl, 4)
#define __NR_nfsservctl 205
-__SYSCALL(205, sys_nfsservctl, 3)
+__SYSCALL(205, sys_ni_syscall, 0)
#define __NR__sysctl 206
__SYSCALL(206, sys_sysctl, 1)
#define __NR_bdflush 207
{
char *s[4], *p, *major_s = NULL, *minor_s = NULL;
int ret;
- unsigned long major, minor, temp;
+ unsigned long major, minor;
int i = 0;
dev_t dev;
- u64 bps, iops;
+ u64 temp;
memset(s, 0, sizeof(s));
dev = MKDEV(major, minor);
- ret = blkio_check_dev_num(dev);
+ ret = strict_strtoull(s[1], 10, &temp);
if (ret)
- return ret;
+ return -EINVAL;
- newpn->dev = dev;
+ /* For rule removal, do not check for device presence. */
+ if (temp) {
+ ret = blkio_check_dev_num(dev);
+ if (ret)
+ return ret;
+ }
- if (s[1] == NULL)
- return -EINVAL;
+ newpn->dev = dev;
switch (plid) {
case BLKIO_POLICY_PROP:
- ret = strict_strtoul(s[1], 10, &temp);
- if (ret || (temp < BLKIO_WEIGHT_MIN && temp > 0) ||
- temp > BLKIO_WEIGHT_MAX)
+ if ((temp < BLKIO_WEIGHT_MIN && temp > 0) ||
+ temp > BLKIO_WEIGHT_MAX)
return -EINVAL;
newpn->plid = plid;
switch(fileid) {
case BLKIO_THROTL_read_bps_device:
case BLKIO_THROTL_write_bps_device:
- ret = strict_strtoull(s[1], 10, &bps);
- if (ret)
- return -EINVAL;
-
newpn->plid = plid;
newpn->fileid = fileid;
- newpn->val.bps = bps;
+ newpn->val.bps = temp;
break;
case BLKIO_THROTL_read_iops_device:
case BLKIO_THROTL_write_iops_device:
- ret = strict_strtoull(s[1], 10, &iops);
- if (ret)
- return -EINVAL;
-
- if (iops > THROTL_IOPS_MAX)
+ if (temp > THROTL_IOPS_MAX)
return -EINVAL;
newpn->plid = plid;
newpn->fileid = fileid;
- newpn->val.iops = (unsigned int)iops;
+ newpn->val.iops = (unsigned int)temp;
break;
}
break;
EXPORT_SYMBOL(blk_put_queue);
/*
- * Note: If a driver supplied the queue lock, it should not zap that lock
- * unexpectedly as some queue cleanup components like elevator_exit() and
- * blk_throtl_exit() need queue lock.
+ * Note: If a driver supplied the queue lock, it is disconnected
+ * by this function. The actual state of the lock doesn't matter
+ * here as the request_queue isn't accessible after this point
+ * (QUEUE_FLAG_DEAD is set) and no other requests will be queued.
*/
void blk_cleanup_queue(struct request_queue *q)
{
queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
mutex_unlock(&q->sysfs_lock);
- if (q->elevator)
- elevator_exit(q->elevator);
-
- blk_throtl_exit(q);
+ if (q->queue_lock != &q->__queue_lock)
+ q->queue_lock = &q->__queue_lock;
blk_put_queue(q);
}
* true if merge was successful, otherwise false.
*/
static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
- struct bio *bio)
+ struct bio *bio, unsigned int *request_count)
{
struct blk_plug *plug;
struct request *rq;
plug = tsk->plug;
if (!plug)
goto out;
+ *request_count = 0;
list_for_each_entry_reverse(rq, &plug->list, queuelist) {
int el_ret;
+ (*request_count)++;
+
if (rq->q != q)
continue;
struct blk_plug *plug;
int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT;
struct request *req;
+ unsigned int request_count = 0;
/*
* low level driver can indicate that it wants pages above a
* Check if we can merge with the plugged list before grabbing
* any locks.
*/
- if (attempt_plug_merge(current, q, bio))
+ if (attempt_plug_merge(current, q, bio, &request_count))
goto out;
spin_lock_irq(q->queue_lock);
if (__rq->q != q)
plug->should_sort = 1;
}
+ if (request_count >= BLK_MAX_REQUEST_COUNT)
+ blk_flush_plug_list(plug, false);
list_add_tail(&req->queuelist, &plug->list);
- plug->count++;
drive_stat_acct(req, 1);
- if (plug->count >= BLK_MAX_REQUEST_COUNT)
- blk_flush_plug_list(plug, false);
} else {
spin_lock_irq(q->queue_lock);
add_acct_request(q, req, where);
INIT_LIST_HEAD(&plug->list);
INIT_LIST_HEAD(&plug->cb_list);
plug->should_sort = 0;
- plug->count = 0;
/*
* If this is a nested plug, don't actually assign it. It will be
return;
list_splice_init(&plug->list, &list);
- plug->count = 0;
if (plug->should_sort) {
list_sort(NULL, &list, plug_rq_cmp);
/*
* Select completion CPU
*/
- if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) {
+ if (req->cpu != -1) {
ccpu = req->cpu;
if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) {
ccpu = blk_cpu_to_group(ccpu);
ret = queue_var_store(&val, page, count);
spin_lock_irq(q->queue_lock);
- if (val) {
+ if (val == 2) {
queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
- if (val == 2)
- queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
- } else {
+ queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
+ } else if (val == 1) {
+ queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
+ queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
+ } else if (val == 0) {
queue_flag_clear(QUEUE_FLAG_SAME_COMP, q);
queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
}
blk_sync_queue(q);
+ if (q->elevator)
+ elevator_exit(q->elevator);
+
+ blk_throtl_exit(q);
+
if (rl->rq_pool)
mempool_destroy(rl->rq_pool);
unsigned long slice_end;
long slice_resid;
- /* pending metadata requests */
- int meta_pending;
+ /* pending priority requests */
+ int prio_pending;
/* number of requests that are on the dispatch list or inside driver */
int dispatched;
if (rq_is_sync(rq1) != rq_is_sync(rq2))
return rq_is_sync(rq1) ? rq1 : rq2;
- if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_META)
- return rq1->cmd_flags & REQ_META ? rq1 : rq2;
+ if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_PRIO)
+ return rq1->cmd_flags & REQ_PRIO ? rq1 : rq2;
s1 = blk_rq_pos(rq1);
s2 = blk_rq_pos(rq2);
cfqq->cfqd->rq_queued--;
cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
rq_data_dir(rq), rq_is_sync(rq));
- if (rq->cmd_flags & REQ_META) {
- WARN_ON(!cfqq->meta_pending);
- cfqq->meta_pending--;
+ if (rq->cmd_flags & REQ_PRIO) {
+ WARN_ON(!cfqq->prio_pending);
+ cfqq->prio_pending--;
}
}
* So both queues are sync. Let the new request get disk time if
* it's a metadata request and the current queue is doing regular IO.
*/
- if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending)
+ if ((rq->cmd_flags & REQ_PRIO) && !cfqq->prio_pending)
return true;
/*
struct cfq_io_context *cic = RQ_CIC(rq);
cfqd->rq_queued++;
- if (rq->cmd_flags & REQ_META)
- cfqq->meta_pending++;
+ if (rq->cmd_flags & REQ_PRIO)
+ cfqq->prio_pending++;
cfq_update_io_thinktime(cfqd, cfqq, cic);
cfq_update_io_seektime(cfqd, cfqq, rq);
/* Maximum sleep allowed via Sleep() operator */
-#define ACPI_MAX_SLEEP 20000 /* Two seconds */
+#define ACPI_MAX_SLEEP 2000 /* Two seconds */
/******************************************************************************
*
bool "APEI Generic Hardware Error Source"
depends on ACPI_APEI && X86
select ACPI_HED
+ select IRQ_WORK
select LLIST
select GENERIC_ALLOCATOR
help
};
capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
- capbuf[OSC_SUPPORT_TYPE] = 0;
+ capbuf[OSC_SUPPORT_TYPE] = 1;
capbuf[OSC_CONTROL_TYPE] = 0;
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))
#include <mach/at91sam9_smc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define DRV_NAME "pata_at91"
#define DRV_VERSION "0.3"
static int release_nodes(struct device *dev, struct list_head *first,
struct list_head *end, unsigned long flags)
+ __releases(&dev->devres_lock)
{
LIST_HEAD(todo);
int cnt;
return err;
}
-static __initdata DECLARE_COMPLETION(setup_done);
+static DECLARE_COMPLETION(setup_done);
static int handle(const char *name, mode_t mode, struct device *dev)
{
if (!firmware_p)
return -EINVAL;
- if (WARN_ON(usermodehelper_is_disabled())) {
- dev_err(device, "firmware: %s will not be loaded\n", name);
- return -EBUSY;
- }
-
*firmware_p = firmware = kzalloc(sizeof(*firmware), GFP_KERNEL);
if (!firmware) {
dev_err(device, "%s: kmalloc(struct firmware) failed\n",
return 0;
}
+ if (WARN_ON(usermodehelper_is_disabled())) {
+ dev_err(device, "firmware: %s will not be loaded\n", name);
+ retval = -EBUSY;
+ goto out;
+ }
+
if (uevent)
dev_dbg(device, "firmware: requesting %s\n", name);
/**
* arch_setup_pdev_archdata - Allow manipulation of archdata before its used
- * @dev: platform device
+ * @pdev: platform device
*
* This is called before platform_device_add() such that any pdev_archdata may
* be setup before the platform_notifier is called. So if a user needs to
struct pm_clk_data {
struct list_head clock_list;
- struct mutex lock;
+ spinlock_t lock;
};
enum pce_status {
return dev ? dev->power.subsys_data : NULL;
}
+/**
+ * pm_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @ce: PM clock entry corresponding to the clock.
+ */
+static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
+{
+ ce->clk = clk_get(dev, ce->con_id);
+ if (IS_ERR(ce->clk)) {
+ ce->status = PCE_STATUS_ERROR;
+ } else {
+ ce->status = PCE_STATUS_ACQUIRED;
+ dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+ }
+}
+
/**
* pm_clk_add - Start using a device clock for power management.
* @dev: Device whose clock is going to be used for power management.
}
}
- mutex_lock(&pcd->lock);
+ pm_clk_acquire(dev, ce);
+
+ spin_lock_irq(&pcd->lock);
list_add_tail(&ce->node, &pcd->clock_list);
- mutex_unlock(&pcd->lock);
+ spin_unlock_irq(&pcd->lock);
return 0;
}
/**
* __pm_clk_remove - Destroy PM clock entry.
* @ce: PM clock entry to destroy.
- *
- * This routine must be called under the mutex protecting the PM list of clocks
- * corresponding the the @ce's device.
*/
static void __pm_clk_remove(struct pm_clock_entry *ce)
{
if (!ce)
return;
- list_del(&ce->node);
-
if (ce->status < PCE_STATUS_ERROR) {
if (ce->status == PCE_STATUS_ENABLED)
clk_disable(ce->clk);
if (!pcd)
return;
- mutex_lock(&pcd->lock);
+ spin_lock_irq(&pcd->lock);
list_for_each_entry(ce, &pcd->clock_list, node) {
- if (!con_id && !ce->con_id) {
- __pm_clk_remove(ce);
- break;
- } else if (!con_id || !ce->con_id) {
+ if (!con_id && !ce->con_id)
+ goto remove;
+ else if (!con_id || !ce->con_id)
continue;
- } else if (!strcmp(con_id, ce->con_id)) {
- __pm_clk_remove(ce);
- break;
- }
+ else if (!strcmp(con_id, ce->con_id))
+ goto remove;
}
- mutex_unlock(&pcd->lock);
+ spin_unlock_irq(&pcd->lock);
+ return;
+
+ remove:
+ list_del(&ce->node);
+ spin_unlock_irq(&pcd->lock);
+
+ __pm_clk_remove(ce);
}
/**
}
INIT_LIST_HEAD(&pcd->clock_list);
- mutex_init(&pcd->lock);
+ spin_lock_init(&pcd->lock);
dev->power.subsys_data = pcd;
return 0;
}
{
struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce, *c;
+ struct list_head list;
if (!pcd)
return;
dev->power.subsys_data = NULL;
+ INIT_LIST_HEAD(&list);
- mutex_lock(&pcd->lock);
+ spin_lock_irq(&pcd->lock);
list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node)
- __pm_clk_remove(ce);
+ list_move(&ce->node, &list);
- mutex_unlock(&pcd->lock);
+ spin_unlock_irq(&pcd->lock);
kfree(pcd);
+
+ list_for_each_entry_safe_reverse(ce, c, &list, node) {
+ list_del(&ce->node);
+ __pm_clk_remove(ce);
+ }
}
#endif /* CONFIG_PM */
#ifdef CONFIG_PM_RUNTIME
-/**
- * pm_clk_acquire - Acquire a device clock.
- * @dev: Device whose clock is to be acquired.
- * @con_id: Connection ID of the clock.
- */
-static void pm_clk_acquire(struct device *dev,
- struct pm_clock_entry *ce)
-{
- ce->clk = clk_get(dev, ce->con_id);
- if (IS_ERR(ce->clk)) {
- ce->status = PCE_STATUS_ERROR;
- } else {
- ce->status = PCE_STATUS_ACQUIRED;
- dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
- }
-}
-
/**
* pm_clk_suspend - Disable clocks in a device's PM clock list.
* @dev: Device to disable the clocks for.
{
struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce;
+ unsigned long flags;
dev_dbg(dev, "%s()\n", __func__);
if (!pcd)
return 0;
- mutex_lock(&pcd->lock);
+ spin_lock_irqsave(&pcd->lock, flags);
list_for_each_entry_reverse(ce, &pcd->clock_list, node) {
- if (ce->status == PCE_STATUS_NONE)
- pm_clk_acquire(dev, ce);
-
if (ce->status < PCE_STATUS_ERROR) {
clk_disable(ce->clk);
ce->status = PCE_STATUS_ACQUIRED;
}
}
- mutex_unlock(&pcd->lock);
+ spin_unlock_irqrestore(&pcd->lock, flags);
return 0;
}
{
struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce;
+ unsigned long flags;
dev_dbg(dev, "%s()\n", __func__);
if (!pcd)
return 0;
- mutex_lock(&pcd->lock);
+ spin_lock_irqsave(&pcd->lock, flags);
list_for_each_entry(ce, &pcd->clock_list, node) {
- if (ce->status == PCE_STATUS_NONE)
- pm_clk_acquire(dev, ce);
-
if (ce->status < PCE_STATUS_ERROR) {
clk_enable(ce->clk);
ce->status = PCE_STATUS_ENABLED;
}
}
- mutex_unlock(&pcd->lock);
+ spin_unlock_irqrestore(&pcd->lock, flags);
return 0;
}
{
struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce;
+ unsigned long flags;
dev_dbg(dev, "%s()\n", __func__);
if (!pcd || !dev->driver)
return 0;
- mutex_lock(&pcd->lock);
+ spin_lock_irqsave(&pcd->lock, flags);
list_for_each_entry_reverse(ce, &pcd->clock_list, node)
clk_disable(ce->clk);
- mutex_unlock(&pcd->lock);
+ spin_unlock_irqrestore(&pcd->lock, flags);
return 0;
}
{
struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce;
+ unsigned long flags;
dev_dbg(dev, "%s()\n", __func__);
if (!pcd || !dev->driver)
return 0;
- mutex_lock(&pcd->lock);
+ spin_lock_irqsave(&pcd->lock, flags);
list_for_each_entry(ce, &pcd->clock_list, node)
clk_enable(ce->clk);
- mutex_unlock(&pcd->lock);
+ spin_unlock_irqrestore(&pcd->lock, flags);
return 0;
}
map->work_buf = kmalloc(map->format.buf_size, GFP_KERNEL);
if (map->work_buf == NULL) {
ret = -ENOMEM;
- goto err_bus;
+ goto err_map;
}
return map;
-err_bus:
- module_put(map->bus->owner);
err_map:
kfree(map);
err:
void regmap_exit(struct regmap *map)
{
kfree(map->work_buf);
- module_put(map->bus->owner);
kfree(map);
}
EXPORT_SYMBOL_GPL(regmap_exit);
static int bcma_bus_match(struct device *dev, struct device_driver *drv);
static int bcma_device_probe(struct device *dev);
static int bcma_device_remove(struct device *dev);
+static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env);
static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf)
{
.match = bcma_bus_match,
.probe = bcma_device_probe,
.remove = bcma_device_remove,
+ .uevent = bcma_device_uevent,
.dev_attrs = bcma_device_attrs,
};
return 0;
}
+static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+
+ return add_uevent_var(env,
+ "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X",
+ core->id.manuf, core->id.id,
+ core->id.rev, core->id.class);
+}
+
static int __init bcma_modinit(void)
{
int err;
use_virtual_dma = can_use_virtual_dma & 1;
fdc_state[0].address = FDC1;
if (fdc_state[0].address == -1) {
- del_timer(&fd_timeout);
+ del_timer_sync(&fd_timeout);
err = -ENODEV;
goto out_unreg_region;
}
fdc = 0; /* reset fdc in case of unexpected interrupt */
err = floppy_grab_irq_and_dma();
if (err) {
- del_timer(&fd_timeout);
+ del_timer_sync(&fd_timeout);
err = -EBUSY;
goto out_unreg_region;
}
user_reset_fdc(-1, FD_RESET_ALWAYS, false);
}
fdc = 0;
- del_timer(&fd_timeout);
+ del_timer_sync(&fd_timeout);
current_drive = 0;
initialized = true;
if (have_no_fdc) {
unregister_blkdev(FLOPPY_MAJOR, "fd");
out_put_disk:
while (dr--) {
- del_timer(&motor_off_timer[dr]);
+ del_timer_sync(&motor_off_timer[dr]);
if (disks[dr]->queue)
blk_cleanup_queue(disks[dr]->queue);
put_disk(disks[dr]);
#define DRV_PFX "xen-blkback:"
#define DPRINTK(fmt, args...) \
- pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \
+ pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \
__func__, __LINE__, ##args)
/*
* Enforce precondition before potential leak point.
- * blkif_disconnect() is idempotent.
+ * xen_blkif_disconnect() is idempotent.
*/
xen_blkif_disconnect(be->blkif);
break;
case XenbusStateClosing:
- xen_blkif_disconnect(be->blkif);
xenbus_switch_state(dev, XenbusStateClosing);
break;
case XenbusStateClosed:
+ xen_blkif_disconnect(be->blkif);
xenbus_switch_state(dev, XenbusStateClosed);
if (xenbus_dev_is_online(dev))
break;
/* fall through if not online */
case XenbusStateUnknown:
- /* implies blkif_disconnect() via blkback_remove() */
+ /* implies xen_blkif_disconnect() via xen_blkbk_remove() */
device_unregister(&dev->dev);
break;
/* Atheros AR3011 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3002) },
{ USB_DEVICE(0x13d3, 0x3304) },
+ { USB_DEVICE(0x0930, 0x0215) },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
/* Apple MacBookAir3,1, MacBookAir3,2 */
{ USB_DEVICE(0x05ac, 0x821b) },
+ /* Apple MacBookAir4,1 */
+ { USB_DEVICE(0x05ac, 0x821f) },
+
/* Apple MacBookPro8,2 */
{ USB_DEVICE(0x05ac, 0x821a) },
+ /* Apple MacMini5,1 */
+ { USB_DEVICE(0x05ac, 0x8281) },
+
/* AVM BlueFRITZ! USB v2.0 */
{ USB_DEVICE(0x057c, 0x3800) },
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- if (err != -EPERM)
+ /* -EPERM: urb is being killed;
+ * -ENODEV: device got disconnected */
+ if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- if (err != -EPERM)
+ /* -EPERM: urb is being killed;
+ * -ENODEV: device got disconnected */
+ if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- if (err != -EPERM)
+ /* -EPERM: urb is being killed;
+ * -ENODEV: device got disconnected */
+ if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
/* ------- Interfaces to HCI layer ------ */
/* protocol structure registered with shared transport */
static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = {
+ {
+ .chnl_id = HCI_EVENT_PKT, /* HCI Events */
+ .hdr_len = sizeof(struct hci_event_hdr),
+ .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
+ .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
+ .reserve = 8,
+ },
{
.chnl_id = HCI_ACLDATA_PKT, /* ACL */
.hdr_len = sizeof(struct hci_acl_hdr),
.len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */
.reserve = 8,
},
- {
- .chnl_id = HCI_EVENT_PKT, /* HCI Events */
- .hdr_len = sizeof(struct hci_event_hdr),
- .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
- .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
- .reserve = 8,
- },
};
/* Called from HCI core to initialize the device */
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
return 0;
- for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
+ for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) {
err = st_unregister(&ti_st_proto[i]);
if (err)
BT_ERR("st_unregister(%d) failed with error %d",
for (i = 0; i < NUM_SMD_PKT_PORTS; ++i) {
smd_pkt_devp[i] = kzalloc(sizeof(struct smd_pkt_dev),
GFP_KERNEL);
- if (IS_ERR(smd_pkt_devp[i])) {
- r = PTR_ERR(smd_pkt_devp[i]);
- pr_err("kmalloc() failed %d\n", r);
+ if (!smd_pkt_devp[i]) {
+ pr_err("kmalloc() failed\n");
goto clean_cdevs;
}
config TCG_ATMEL
tristate "Atmel TPM Interface"
+ depends on PPC64 || HAS_IOPORT
---help---
If you have a TPM security chip from Atmel say Yes and it
will be accessible from within Linux. To compile this driver
u32 count, ordinal;
unsigned long stop;
+ if (bufsiz > TPM_BUFSIZE)
+ bufsiz = TPM_BUFSIZE;
+
count = be32_to_cpu(*((__be32 *) (buf + 2)));
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
if (count == 0)
{
struct tpm_chip *chip = file->private_data;
ssize_t ret_size;
+ int rc;
del_singleshot_timer_sync(&chip->user_read_timer);
flush_work_sync(&chip->work);
ret_size = size;
mutex_lock(&chip->buffer_mutex);
- if (copy_to_user(buf, chip->data_buffer, ret_size))
+ rc = copy_to_user(buf, chip->data_buffer, ret_size);
+ memset(chip->data_buffer, 0, ret_size);
+ if (rc)
ret_size = -EFAULT;
+
mutex_unlock(&chip->buffer_mutex);
}
if (pdev) {
tpm_nsc_remove(&pdev->dev);
platform_device_unregister(pdev);
- kfree(pdev);
- pdev = NULL;
}
platform_driver_unregister(&nsc_drv);
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/err.h>
+#include <linux/delay.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/sh_timer.h>
static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
{
- int ret;
+ int k, ret;
/* enable clock */
ret = clk_enable(p->clk);
if (ret) {
dev_err(&p->pdev->dev, "cannot enable clock\n");
- return ret;
+ goto err0;
}
/* make sure channel is disabled */
sh_cmt_write(p, CMCOR, 0xffffffff);
sh_cmt_write(p, CMCNT, 0);
+ /*
+ * According to the sh73a0 user's manual, as CMCNT can be operated
+ * only by the RCLK (Pseudo 32 KHz), there's one restriction on
+ * modifying CMCNT register; two RCLK cycles are necessary before
+ * this register is either read or any modification of the value
+ * it holds is reflected in the LSI's actual operation.
+ *
+ * While at it, we're supposed to clear out the CMCNT as of this
+ * moment, so make sure it's processed properly here. This will
+ * take RCLKx2 at maximum.
+ */
+ for (k = 0; k < 100; k++) {
+ if (!sh_cmt_read(p, CMCNT))
+ break;
+ udelay(1);
+ }
+
+ if (sh_cmt_read(p, CMCNT)) {
+ dev_err(&p->pdev->dev, "cannot clear CMCNT\n");
+ ret = -ETIMEDOUT;
+ goto err1;
+ }
+
/* enable channel */
sh_cmt_start_stop_ch(p, 1);
return 0;
+ err1:
+ /* stop clock */
+ clk_disable(p->clk);
+
+ err0:
+ return ret;
}
static void sh_cmt_disable(struct sh_cmt_priv *p)
pr = per_cpu(processors, cpu);
pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+ if (!pr)
+ return -ENODEV;
+
status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer);
if (ACPI_FAILURE(status))
return -ENODEV;
* @tasklet: Tasklet that gets scheduled from interrupt context to complete a
* transfer and call client callback.
* @client: Cliented owned descriptor list.
+ * @pending_queue: Submitted jobs, to be issued by issue_pending()
* @active: Active descriptor.
* @queue: Queued jobs.
+ * @prepare_queue: Prepared jobs.
* @dma_cfg: The client configuration of this dma channel.
* @configured: whether the dma_cfg configuration is valid
* @base: Pointer to the device instance struct.
struct list_head pending_queue;
struct list_head active;
struct list_head queue;
+ struct list_head prepare_queue;
struct stedma40_chan_cfg dma_cfg;
bool configured;
struct d40_base *base;
list_for_each_entry_safe(d, _d, &d40c->client, node)
if (async_tx_test_ack(&d->txd)) {
- d40_pool_lli_free(d40c, d);
d40_desc_remove(d);
desc = d;
memset(desc, 0, sizeof(*desc));
return d;
}
+/* remove desc from current queue and add it to the pending_queue */
static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc)
{
+ d40_desc_remove(desc);
+ desc->is_in_client_list = false;
list_add_tail(&desc->node, &d40c->pending_queue);
}
static void d40_term_all(struct d40_chan *d40c)
{
struct d40_desc *d40d;
+ struct d40_desc *_d;
/* Release active descriptors */
while ((d40d = d40_first_active_get(d40c))) {
d40_desc_free(d40c, d40d);
}
+ /* Release client owned descriptors */
+ if (!list_empty(&d40c->client))
+ list_for_each_entry_safe(d40d, _d, &d40c->client, node) {
+ d40_desc_remove(d40d);
+ d40_desc_free(d40c, d40d);
+ }
+
+ /* Release descriptors in prepare queue */
+ if (!list_empty(&d40c->prepare_queue))
+ list_for_each_entry_safe(d40d, _d,
+ &d40c->prepare_queue, node) {
+ d40_desc_remove(d40d);
+ d40_desc_free(d40c, d40d);
+ }
+
d40c->pending_tx = 0;
d40c->busy = false;
}
if (!d40d->cyclic) {
if (async_tx_test_ack(&d40d->txd)) {
- d40_pool_lli_free(d40c, d40d);
d40_desc_remove(d40d);
d40_desc_free(d40c, d40d);
} else {
u32 event;
struct d40_phy_res *phy = d40c->phy_chan;
bool is_src;
- struct d40_desc *d;
- struct d40_desc *_d;
-
/* Terminate all queued and active transfers */
d40_term_all(d40c);
- /* Release client owned descriptors */
- if (!list_empty(&d40c->client))
- list_for_each_entry_safe(d, _d, &d40c->client, node) {
- d40_pool_lli_free(d40c, d);
- d40_desc_remove(d);
- d40_desc_free(d40c, d);
- }
-
if (phy == NULL) {
chan_err(d40c, "phy == null\n");
return -EINVAL;
goto err;
}
+ /*
+ * add descriptor to the prepare queue in order to be able
+ * to free them later in terminate_all
+ */
+ list_add_tail(&desc->node, &chan->prepare_queue);
+
spin_unlock_irqrestore(&chan->lock, flags);
return &desc->txd;
INIT_LIST_HEAD(&d40c->queue);
INIT_LIST_HEAD(&d40c->pending_queue);
INIT_LIST_HEAD(&d40c->client);
+ INIT_LIST_HEAD(&d40c->prepare_queue);
tasklet_init(&d40c->tasklet, dma_tasklet,
(unsigned long) d40c);
{PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID,
QUIRK_CYCLE_TIMER},
+ {PCI_VENDOR_ID_O2, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_NO_MSI},
+
{PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
QUIRK_CYCLE_TIMER},
{
struct fw_unit *unit = fw_unit(dev);
struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
+ struct sbp2_logical_unit *lu;
+
+ list_for_each_entry(lu, &tgt->lu_list, link)
+ cancel_delayed_work_sync(&lu->work);
sbp2_target_put(tgt);
return 0;
static efi_status_t gsmi_set_variable(efi_char16_t *name,
efi_guid_t *vendor,
- unsigned long attr,
+ u32 attr,
unsigned long data_size,
void *data)
{
The Intel Tunnel Creek processor has 5 GPIOs powered by the
core power rail and 9 from suspend power supply.
+config GPIO_U300
+ bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+ depends on GPIOLIB && ARCH_U300
+ help
+ Say yes here to support GPIO interface on ST-Ericsson U300.
+ The names of the two IP block variants supported are
+ COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+ ports of 8 GPIO pins each.
+
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
depends on MFD_SUPPORT && PCI
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
+obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
+obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
+obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o
obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o
-
+obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <mach/gpio.h>
-
#include <asm/mach/irq.h>
struct davinci_gpio_regs {
static int gpio_irq_type(struct irq_data *d, unsigned trigger)
{
- struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
#include <linux/basic_mmio_gpio.h>
#include <mach/hardware.h>
+#include <mach/gpio-ep93xx.h>
+
+#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
struct ep93xx_gpio {
void __iomem *mmio_base;
return 0;
}
+/*
+ * Map GPIO A0..A7 (0..7) to irq 64..71,
+ * B0..B7 (7..15) to irq 72..79, and
+ * F0..F7 (16..24) to irq 80..87.
+ */
+static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ if (gpio > EP93XX_GPIO_LINE_MAX_IRQ)
+ return -EINVAL;
+
+ return 64 + gpio;
+}
+
static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
{
bgc->gc.label = bank->label;
bgc->gc.base = bank->base;
- if (bank->has_debounce)
+ if (bank->has_debounce) {
bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
+ bgc->gc.to_irq = ep93xx_gpio_to_irq;
+ }
return gpiochip_add(&bgc->gc);
}
return 0;
}
-int __devexit bgpio_remove(struct bgpio_chip *bgc)
+int bgpio_remove(struct bgpio_chip *bgc)
{
int err = gpiochip_remove(&bgc->gc);
}
EXPORT_SYMBOL_GPL(bgpio_remove);
-int __devinit bgpio_init(struct bgpio_chip *bgc,
- struct device *dev,
- unsigned long sz,
- void __iomem *dat,
- void __iomem *set,
- void __iomem *clr,
- void __iomem *dirout,
- void __iomem *dirin,
- bool big_endian)
+int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
+ unsigned long sz, void __iomem *dat, void __iomem *set,
+ void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
+ bool big_endian)
{
int ret;
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/mach/irq.h>
#include <mach/regs-gpio.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
/*
* Configure a GPIO line for either GPIO function, or its internal
#include <mach/hardware.h>
#include <mach/platform.h>
-#include "common.h"
+#include <mach/gpio-lpc32xx.h>
#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
#include <asm/mach/irq.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
/*
* The GPIO module in the Nomadik family of Systems-on-Chip is an
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <asm/mach/irq.h>
struct gpio_bank {
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/syscore_ops.h>
#include <linux/slab.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
int pxa_last_gpio;
struct gpio_chip *c = &chips[i].chip;
sprintf(chips[i].label, "gpio-%d", i);
- chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+ chips[i].regbase = GPIO_BANK(i);
c->base = gpio;
c->label = chips[i].label;
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
-#include "generic.h"
static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
{
#include <asm/mach/irq.h>
+#include <mach/gpio-tegra.h>
#include <mach/iomap.h>
#include <mach/suspend.h>
return 0;
}
-
+static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ return TEGRA_GPIO_TO_IRQ(offset);
+}
static struct gpio_chip tegra_gpio_chip = {
.label = "tegra-gpio",
.get = tegra_gpio_get,
.direction_output = tegra_gpio_direction_output,
.set = tegra_gpio_set,
+ .to_irq = tegra_gpio_to_irq,
.base = 0,
.ngpio = TEGRA_NR_GPIOS,
};
static int __init tegra_gpio_init(void)
{
struct tegra_gpio_bank *bank;
+ int gpio;
int i;
int j;
gpiochip_add(&tegra_gpio_chip);
- for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
- bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
+ for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
+ int irq = TEGRA_GPIO_TO_IRQ(gpio);
+ /* No validity check; all Tegra GPIOs are valid IRQs */
+
+ bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
- irq_set_lockdep_class(i, &gpio_lock_class);
- irq_set_chip_data(i, bank);
- irq_set_chip_and_handler(i, &tegra_gpio_irq_chip,
+ irq_set_lockdep_class(irq, &gpio_lock_class);
+ irq_set_chip_data(irq, bank);
+ irq_set_chip_and_handler(irq, &tegra_gpio_irq_chip,
handle_simple_irq);
- set_irq_flags(i, IRQF_VALID);
+ set_irq_flags(irq, IRQF_VALID);
}
for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
/*
* U300 GPIO module.
*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2011 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* This can driver either of the two basic GPIO cores
* available in the U300 platforms:
* COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
* COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
- * Notice that you also have inline macros in <asm-arch/gpio.h>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <mach/gpio-u300.h>
-/* Reference to GPIO block clock */
-static struct clk *clk;
+/*
+ * Bias modes for U300 GPIOs
+ *
+ * GPIO_U300_CONFIG_BIAS_UNKNOWN: this bias mode is not known to us
+ * GPIO_U300_CONFIG_BIAS_FLOAT: no specific bias, the GPIO will float or state
+ * is not controlled by software
+ * GPIO_U300_CONFIG_BIAS_PULL_UP: the GPIO will be pulled up (usually with high
+ * impedance to VDD)
+ */
+#define GPIO_U300_CONFIG_BIAS_UNKNOWN 0x1000
+#define GPIO_U300_CONFIG_BIAS_FLOAT 0x1001
+#define GPIO_U300_CONFIG_BIAS_PULL_UP 0x1002
-/* Memory resource */
-static struct resource *memres;
-static void __iomem *virtbase;
-static struct device *gpiodev;
+/*
+ * Drive modes for U300 GPIOs (output)
+ *
+ * GPIO_U300_CONFIG_DRIVE_PUSH_PULL: the GPIO will be driven actively high and
+ * low, this is the most typical case and is typically achieved with two
+ * active transistors on the output
+ * GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain
+ * (open collector) which means it is usually wired with other output
+ * ports which are then pulled up with an external resistor
+ * GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: the GPIO will be driven with open drain
+ * (open emitter) which is the same as open drain mutatis mutandis but
+ * pulled to ground
+ */
+#define GPIO_U300_CONFIG_DRIVE_PUSH_PULL 0x2000
+#define GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN 0x2001
+#define GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE 0x2002
+
+/*
+ * Register definitions for COH 901 335 variant
+ */
+#define U300_335_PORT_STRIDE (0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_335_PXPDIR (0x00)
+#define U300_335_PXPDOR (0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_335_PXPCR (0x04)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_335_PXIEV (0x08)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_335_PXIEN (0x0C)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_335_PXIFR (0x10)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_335_PXICR (0x14)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_335_PXPER (0x18)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_335_CR (0x54)
+#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
+
+/*
+ * Register definitions for COH 901 571 / 3 variant
+ */
+#define U300_571_PORT_STRIDE (0x30)
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2 (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_571_CR (0x00)
+#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL)
+#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
+/*
+ * These registers have the same layout and function as the corresponding
+ * COH 901 335 registers, just at different offset.
+ */
+#define U300_571_PXPDIR (0x04)
+#define U300_571_PXPDOR (0x08)
+#define U300_571_PXPCR (0x0C)
+#define U300_571_PXPER (0x10)
+#define U300_571_PXIEV (0x14)
+#define U300_571_PXIEN (0x18)
+#define U300_571_PXIFR (0x1C)
+#define U300_571_PXICR (0x20)
+
+/* 8 bits per port, no version has more than 7 ports */
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7)
+
+struct u300_gpio {
+ struct gpio_chip chip;
+ struct list_head port_list;
+ struct clk *clk;
+ struct resource *memres;
+ void __iomem *base;
+ struct device *dev;
+ int irq_base;
+ u32 stride;
+ /* Register offsets */
+ u32 pcr;
+ u32 dor;
+ u32 dir;
+ u32 per;
+ u32 icr;
+ u32 ien;
+ u32 iev;
+};
struct u300_gpio_port {
- const char *name;
+ struct list_head node;
+ struct u300_gpio *gpio;
+ char name[8];
int irq;
int number;
+ u8 toggle_edge_mode;
};
+/*
+ * Macro to expand to read a specific register found in the "gpio"
+ * struct. It requires the struct u300_gpio *gpio variable to exist in
+ * its context. It calculates the port offset from the given pin
+ * offset, muliplies by the port stride and adds the register offset
+ * so it provides a pointer to the desired register.
+ */
+#define U300_PIN_REG(pin, reg) \
+ (gpio->base + (pin >> 3) * gpio->stride + gpio->reg)
-static struct u300_gpio_port gpio_ports[] = {
- {
- .name = "gpio0",
- .number = 0,
- },
- {
- .name = "gpio1",
- .number = 1,
- },
- {
- .name = "gpio2",
- .number = 2,
- },
-#ifdef U300_COH901571_3
- {
- .name = "gpio3",
- .number = 3,
- },
- {
- .name = "gpio4",
- .number = 4,
- },
-#ifdef CONFIG_MACH_U300_BS335
- {
- .name = "gpio5",
- .number = 5,
- },
- {
- .name = "gpio6",
- .number = 6,
- },
-#endif
-#endif
+/*
+ * Provides a bitmask for a specific gpio pin inside an 8-bit GPIO
+ * register.
+ */
+#define U300_PIN_BIT(pin) \
+ (1 << (pin & 0x07))
+struct u300_gpio_confdata {
+ u16 bias_mode;
+ bool output;
+ int outval;
};
+/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
+#define BS335_GPIO_NUM_PORTS 7
+/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
+#define BS365_GPIO_NUM_PORTS 5
-#ifdef U300_COH901571_3
+#define U300_FLOATING_INPUT { \
+ .bias_mode = GPIO_U300_CONFIG_BIAS_FLOAT, \
+ .output = false, \
+}
-/* Default input value */
-#define DEFAULT_OUTPUT_LOW 0
-#define DEFAULT_OUTPUT_HIGH 1
+#define U300_PULL_UP_INPUT { \
+ .bias_mode = GPIO_U300_CONFIG_BIAS_PULL_UP, \
+ .output = false, \
+}
-/* GPIO Pull-Up status */
-#define DISABLE_PULL_UP 0
-#define ENABLE_PULL_UP 1
+#define U300_OUTPUT_LOW { \
+ .output = true, \
+ .outval = 0, \
+}
-#define GPIO_NOT_USED 0
-#define GPIO_IN 1
-#define GPIO_OUT 2
+#define U300_OUTPUT_HIGH { \
+ .output = true, \
+ .outval = 1, \
+}
-struct u300_gpio_configuration_data {
- unsigned char pin_usage;
- unsigned char default_output_value;
- unsigned char pull_up;
-};
/* Initial configuration */
-const struct u300_gpio_configuration_data
-u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
-#ifdef CONFIG_MACH_U300_BS335
+static const struct __initdata u300_gpio_confdata
+bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 1, pins 0-7 */
{
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 2, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
},
/* Port 3, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 4, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 5, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 6, pind 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
}
-#endif
+};
-#ifdef CONFIG_MACH_U300_BS365
+static const struct __initdata u300_gpio_confdata
+bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 1, pins 0-7 */
{
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 2, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
},
/* Port 3, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
},
/* Port 4, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
/* These 4 pins doesn't exist on DB3210 */
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
}
-#endif
};
-#endif
-
-/* No users == we can power down GPIO */
-static int gpio_users;
-
-struct gpio_struct {
- int (*callback)(void *);
- void *data;
- int users;
-};
-
-static struct gpio_struct gpio_pin[U300_GPIO_MAX];
-
-/*
- * Let drivers register callback in order to get notified when there is
- * an interrupt on the gpio pin
+/**
+ * to_u300_gpio() - get the pointer to u300_gpio
+ * @chip: the gpio chip member of the structure u300_gpio
*/
-int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+static inline struct u300_gpio *to_u300_gpio(struct gpio_chip *chip)
{
- if (gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "registered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = func;
- gpio_pin[gpio].data = data;
-
- return 0;
+ return container_of(chip, struct u300_gpio, chip);
}
-EXPORT_SYMBOL(gpio_register_callback);
-int gpio_unregister_callback(unsigned gpio)
+static int u300_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- if (!gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "unregistered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = NULL;
- gpio_pin[gpio].data = NULL;
+ struct u300_gpio *gpio = to_u300_gpio(chip);
- return 0;
+ return readl(U300_PIN_REG(offset, dir)) & U300_PIN_BIT(offset);
}
-EXPORT_SYMBOL(gpio_unregister_callback);
-/* Non-zero means valid */
-int gpio_is_valid(int number)
+static void u300_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- if (number >= 0 &&
- number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
- return 1;
- return 0;
-}
-EXPORT_SYMBOL(gpio_is_valid);
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ unsigned long flags;
+ u32 val;
-int gpio_request(unsigned gpio, const char *label)
-{
- if (gpio_pin[gpio].users)
- return -EINVAL;
- else
- gpio_pin[gpio].users++;
+ local_irq_save(flags);
- gpio_users++;
+ val = readl(U300_PIN_REG(offset, dor));
+ if (value)
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
+ else
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
- return 0;
+ local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_request);
-void gpio_free(unsigned gpio)
+static int u300_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- gpio_users--;
- gpio_pin[gpio].users--;
- if (unlikely(gpio_pin[gpio].users < 0)) {
- dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
- gpio);
- gpio_pin[gpio].users = 0;
- }
-
- return;
-}
-EXPORT_SYMBOL(gpio_free);
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ unsigned long flags;
+ u32 val;
-/* This returns zero or nonzero */
-int gpio_get_value(unsigned gpio)
-{
- return readl(virtbase + U300_GPIO_PXPDIR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+ local_irq_save(flags);
+ val = readl(U300_PIN_REG(offset, pcr));
+ /* Mask out this pin, note 2 bits per setting */
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ local_irq_restore(flags);
+ return 0;
}
-EXPORT_SYMBOL(gpio_get_value);
-/*
- * We hope that the compiler will optimize away the unused branch
- * in case "value" is a constant
- */
-void gpio_set_value(unsigned gpio, int value)
+static int u300_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
{
- u32 val;
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
+ u32 oldmode;
+ u32 val;
local_irq_save(flags);
- if (value) {
- /* set */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val | (1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- /* clear */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val & ~(1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(offset, pcr));
+ /*
+ * Drive mode must be set by the special mode set function, set
+ * push/pull mode by default if no mode has been selected.
+ */
+ oldmode = val & (U300_GPIO_PXPCR_PIN_MODE_MASK <<
+ ((offset & 0x07) << 1));
+ /* mode = 0 means input, else some mode is already set */
+ if (oldmode == 0) {
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK <<
+ ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
}
+ u300_gpio_set(chip, offset, value);
local_irq_restore(flags);
+ return 0;
}
-EXPORT_SYMBOL(gpio_set_value);
-int gpio_direction_input(unsigned gpio)
+static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ int retirq = gpio->irq_base + offset;
+
+ dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset,
+ retirq);
+ return retirq;
+}
+
+static int u300_gpio_config(struct gpio_chip *chip, unsigned offset,
+ u16 param, unsigned long *data)
+{
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
u32 val;
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin*/
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
- /* This is not needed since it sets the bits to zero.*/
- /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
+ switch (param) {
+ case GPIO_U300_CONFIG_BIAS_UNKNOWN:
+ case GPIO_U300_CONFIG_BIAS_FLOAT:
+ val = readl(U300_PIN_REG(offset, per));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+ break;
+ case GPIO_U300_CONFIG_BIAS_PULL_UP:
+ val = readl(U300_PIN_REG(offset, per));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_PUSH_PULL:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ default:
+ local_irq_restore(flags);
+ dev_err(gpio->dev, "illegal configuration requested\n");
+ return -EINVAL;
+ }
local_irq_restore(flags);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned gpio, int value)
+static struct gpio_chip u300_gpio_chip = {
+ .label = "u300-gpio-chip",
+ .owner = THIS_MODULE,
+ .get = u300_gpio_get,
+ .set = u300_gpio_set,
+ .direction_input = u300_gpio_direction_input,
+ .direction_output = u300_gpio_direction_output,
+ .to_irq = u300_gpio_to_irq,
+};
+
+static void u300_toggle_trigger(struct u300_gpio *gpio, unsigned offset)
{
- unsigned long flags;
u32 val;
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
- /*
- * FIXME: configure for push/pull, open drain or open source per pin
- * in setup. The current driver will only support push/pull.
- */
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
- << ((gpio & 0x07) << 1));
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- gpio_set_value(gpio, value);
- local_irq_restore(flags);
- return 0;
+ val = readl(U300_PIN_REG(offset, icr));
+ /* Set mode depending on state */
+ if (u300_gpio_get(&gpio->chip, offset)) {
+ /* High now, let's trigger on falling edge next then */
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ dev_dbg(gpio->dev, "next IRQ on falling edge on pin %d\n",
+ offset);
+ } else {
+ /* Low now, let's trigger on rising edge next then */
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ dev_dbg(gpio->dev, "next IRQ on rising edge on pin %d\n",
+ offset);
+ }
}
-EXPORT_SYMBOL(gpio_direction_output);
-/*
- * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
- */
-void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+static int u300_gpio_irq_type(struct irq_data *d, unsigned trigger)
{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
u32 val;
- unsigned long flags;
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val |= (1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- if (edge)
- val |= (1 << (gpio & 0x07));
- else
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+ if ((trigger & IRQF_TRIGGER_RISING) &&
+ (trigger & IRQF_TRIGGER_FALLING)) {
+ /*
+ * The GPIO block can only trigger on falling OR rising edges,
+ * not both. So we need to toggle the mode whenever the pin
+ * goes from one state to the other with a special state flag
+ */
+ dev_dbg(gpio->dev,
+ "trigger on both rising and falling edge on pin %d\n",
+ offset);
+ port->toggle_edge_mode |= U300_PIN_BIT(offset);
+ u300_toggle_trigger(gpio, offset);
+ } else if (trigger & IRQF_TRIGGER_RISING) {
+ dev_dbg(gpio->dev, "trigger on rising edge on pin %d\n",
+ offset);
+ val = readl(U300_PIN_REG(offset, icr));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+ } else if (trigger & IRQF_TRIGGER_FALLING) {
+ dev_dbg(gpio->dev, "trigger on falling edge on pin %d\n",
+ offset);
+ val = readl(U300_PIN_REG(offset, icr));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+ }
+
+ return 0;
}
-EXPORT_SYMBOL(enable_irq_on_gpio_pin);
-void disable_irq_on_gpio_pin(unsigned gpio)
+static void u300_gpio_irq_enable(struct irq_data *d)
{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
u32 val;
unsigned long flags;
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(offset, ien));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
local_irq_restore(flags);
}
-EXPORT_SYMBOL(disable_irq_on_gpio_pin);
-/* Enable (value == 0) or disable (value == 1) internal pullup */
-void gpio_pullup(unsigned gpio, int value)
+static void u300_gpio_irq_disable(struct irq_data *d)
{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
u32 val;
unsigned long flags;
local_irq_save(flags);
- if (value) {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- }
+ val = readl(U300_PIN_REG(offset, ien));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_pullup);
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+static struct irq_chip u300_gpio_irqchip = {
+ .name = "u300-gpio-irqchip",
+ .irq_enable = u300_gpio_irq_enable,
+ .irq_disable = u300_gpio_irq_disable,
+ .irq_set_type = u300_gpio_irq_type,
+
+};
+
+static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct u300_gpio_port *port = dev_id;
- u32 val;
- int pin;
+ struct u300_gpio_port *port = irq_get_handler_data(irq);
+ struct u300_gpio *gpio = port->gpio;
+ int pinoffset = port->number << 3; /* get the right stride */
+ unsigned long val;
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
/* Read event register */
- val = readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Mask with enable register */
- val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(pinoffset, iev));
/* Mask relevant bits */
- val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+ val &= 0xFFU; /* 8 bits per port */
/* ACK IRQ (clear event) */
- writel(val, virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Print message */
- while (val != 0) {
- unsigned gpio;
-
- pin = __ffs(val);
- /* mask off this pin */
- val &= ~(1 << pin);
- gpio = (port->number << 3) + pin;
-
- if (gpio_pin[gpio].callback)
- (void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
- else
- dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
- gpio);
+ writel(val, U300_PIN_REG(pinoffset, iev));
+
+ /* Call IRQ handler */
+ if (val != 0) {
+ int irqoffset;
+
+ for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) {
+ int pin_irq = gpio->irq_base + (port->number << 3)
+ + irqoffset;
+ int offset = pinoffset + irqoffset;
+
+ dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n",
+ pin_irq, offset);
+ generic_handle_irq(pin_irq);
+ /*
+ * Triggering IRQ on both rising and falling edge
+ * needs mockery
+ */
+ if (port->toggle_edge_mode & U300_PIN_BIT(offset))
+ u300_toggle_trigger(gpio, offset);
+ }
}
- return IRQ_HANDLED;
+
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
-static void gpio_set_initial_values(void)
+static void __init u300_gpio_init_pin(struct u300_gpio *gpio,
+ int offset,
+ const struct u300_gpio_confdata *conf)
{
-#ifdef U300_COH901571_3
- int i, j;
- unsigned long flags;
- u32 val;
+ /* Set mode: input or output */
+ if (conf->output) {
+ u300_gpio_direction_output(&gpio->chip, offset, conf->outval);
- /* Write default values to all pins */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+ /* Deactivate bias mode for output */
+ u300_gpio_config(&gpio->chip, offset,
+ GPIO_U300_CONFIG_BIAS_FLOAT,
+ NULL);
+
+ /* Set drive mode for output */
+ u300_gpio_config(&gpio->chip, offset,
+ GPIO_U300_CONFIG_DRIVE_PUSH_PULL, NULL);
+
+ dev_dbg(gpio->dev, "set up pin %d as output, value: %d\n",
+ offset, conf->outval);
+ } else {
+ u300_gpio_direction_input(&gpio->chip, offset);
+
+ /* Always set output low on input pins */
+ u300_gpio_set(&gpio->chip, offset, 0);
+
+ /* Set bias mode for input */
+ u300_gpio_config(&gpio->chip, offset, conf->bias_mode, NULL);
+
+ dev_dbg(gpio->dev, "set up pin %d as input, bias: %04x\n",
+ offset, conf->bias_mode);
}
+}
- /*
- * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
- * to output and 'GPIO_IN' to input for each port. And initialize
- * default value on outputs.
- */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
-
- if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
- writel(val, virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio,
+ struct u300_gpio_platform *plat)
+{
+ int i, j;
+
+ /* Write default config and values to all pins */
+ for (i = 0; i < plat->ports; i++) {
+ for (j = 0; j < 8; j++) {
+ const struct u300_gpio_confdata *conf;
+ int offset = (i*8) + j;
+
+ if (plat->variant == U300_GPIO_COH901571_3_BS335)
+ conf = &bs335_gpio_config[i][j];
+ else if (plat->variant == U300_GPIO_COH901571_3_BS365)
+ conf = &bs365_gpio_config[i][j];
+ else
+ break;
+
+ u300_gpio_init_pin(gpio, offset, conf);
}
}
+}
- /* Enable or disable the internal pull-ups in the GPIO ASIC block */
- for (i = 0; i < U300_GPIO_MAX; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
+{
+ struct u300_gpio_port *port;
+ struct list_head *p, *n;
+
+ list_for_each_safe(p, n, &gpio->port_list) {
+ port = list_entry(p, struct u300_gpio_port, node);
+ list_del(&port->node);
+ free_irq(port->irq, port);
+ kfree(port);
}
-#endif
}
-static int __init gpio_probe(struct platform_device *pdev)
+static int __init u300_gpio_probe(struct platform_device *pdev)
{
- u32 val;
+ struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+ struct u300_gpio *gpio;
int err = 0;
+ int portno;
+ u32 val;
+ u32 ifr;
int i;
- int num_irqs;
- gpiodev = &pdev->dev;
- memset(gpio_pin, 0, sizeof(gpio_pin));
+ gpio = kzalloc(sizeof(struct u300_gpio), GFP_KERNEL);
+ if (gpio == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ gpio->chip = u300_gpio_chip;
+ gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT;
+ gpio->irq_base = plat->gpio_irq_base;
+ gpio->chip.dev = &pdev->dev;
+ gpio->chip.base = plat->gpio_base;
+ gpio->dev = &pdev->dev;
/* Get GPIO clock */
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- err = PTR_ERR(clk);
- dev_err(gpiodev, "could not get GPIO clock\n");
+ gpio->clk = clk_get(gpio->dev, NULL);
+ if (IS_ERR(gpio->clk)) {
+ err = PTR_ERR(gpio->clk);
+ dev_err(gpio->dev, "could not get GPIO clock\n");
goto err_no_clk;
}
- err = clk_enable(clk);
+ err = clk_enable(gpio->clk);
if (err) {
- dev_err(gpiodev, "could not enable GPIO clock\n");
+ dev_err(gpio->dev, "could not enable GPIO clock\n");
goto err_no_clk_enable;
}
- memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!memres)
+ gpio->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!gpio->memres) {
+ dev_err(gpio->dev, "could not get GPIO memory resource\n");
+ err = -ENODEV;
goto err_no_resource;
+ }
- if (!request_mem_region(memres->start, resource_size(memres),
+ if (!request_mem_region(gpio->memres->start,
+ resource_size(gpio->memres),
"GPIO Controller")) {
err = -ENODEV;
goto err_no_ioregion;
}
- virtbase = ioremap(memres->start, resource_size(memres));
- if (!virtbase) {
+ gpio->base = ioremap(gpio->memres->start, resource_size(gpio->memres));
+ if (!gpio->base) {
err = -ENOMEM;
goto err_no_ioremap;
}
- dev_info(gpiodev, "remapped 0x%08x to %p\n",
- memres->start, virtbase);
-
-#ifdef U300_COH901335
- dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
- /* Turn on the GPIO block */
- writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
-#ifdef U300_COH901571_3
- dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
- val = readl(virtbase + U300_GPIO_CR);
- dev_info(gpiodev, "COH901571/3 block version: %d, " \
- "number of cores: %d\n",
- ((val & 0x0000FE00) >> 9),
- ((val & 0x000001FC) >> 2));
- writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
- gpio_set_initial_values();
-
- for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
-
- gpio_ports[num_irqs].irq =
- platform_get_irq_byname(pdev,
- gpio_ports[num_irqs].name);
-
- err = request_irq(gpio_ports[num_irqs].irq,
- gpio_irq_handler, IRQF_DISABLED,
- gpio_ports[num_irqs].name,
- &gpio_ports[num_irqs]);
- if (err) {
- dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
- gpio_ports[num_irqs].name);
- goto err_no_irq;
+
+ if (plat->variant == U300_GPIO_COH901335) {
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 335\n");
+ gpio->stride = U300_335_PORT_STRIDE;
+ gpio->pcr = U300_335_PXPCR;
+ gpio->dor = U300_335_PXPDOR;
+ gpio->dir = U300_335_PXPDIR;
+ gpio->per = U300_335_PXPER;
+ gpio->icr = U300_335_PXICR;
+ gpio->ien = U300_335_PXIEN;
+ gpio->iev = U300_335_PXIEV;
+ ifr = U300_335_PXIFR;
+
+ /* Turn on the GPIO block */
+ writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
+ gpio->base + U300_335_CR);
+ } else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+ plat->variant == U300_GPIO_COH901571_3_BS365) {
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 571/3\n");
+ gpio->stride = U300_571_PORT_STRIDE;
+ gpio->pcr = U300_571_PXPCR;
+ gpio->dor = U300_571_PXPDOR;
+ gpio->dir = U300_571_PXPDIR;
+ gpio->per = U300_571_PXPER;
+ gpio->icr = U300_571_PXICR;
+ gpio->ien = U300_571_PXIEN;
+ gpio->iev = U300_571_PXIEV;
+ ifr = U300_571_PXIFR;
+
+ val = readl(gpio->base + U300_571_CR);
+ dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+ "number of cores: %d totalling %d pins\n",
+ ((val & 0x000001FC) >> 2),
+ ((val & 0x0000FE00) >> 9),
+ ((val & 0x0000FE00) >> 9) * 8);
+ writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
+ gpio->base + U300_571_CR);
+ u300_gpio_init_coh901571(gpio, plat);
+ } else {
+ dev_err(gpio->dev, "unknown block variant\n");
+ err = -ENODEV;
+ goto err_unknown_variant;
+ }
+
+ /* Add each port with its IRQ separately */
+ INIT_LIST_HEAD(&gpio->port_list);
+ for (portno = 0 ; portno < plat->ports; portno++) {
+ struct u300_gpio_port *port =
+ kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL);
+
+ if (!port) {
+ dev_err(gpio->dev, "out of memory\n");
+ err = -ENOMEM;
+ goto err_no_port;
}
- /* Turns off PortX_irq_force */
- writel(0x0, virtbase + U300_GPIO_PXIFR +
- num_irqs * U300_GPIO_PORTX_SPACING);
+
+ snprintf(port->name, 8, "gpio%d", portno);
+ port->number = portno;
+ port->gpio = gpio;
+
+ port->irq = platform_get_irq_byname(pdev,
+ port->name);
+
+ dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq,
+ port->name);
+
+ irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
+ irq_set_handler_data(port->irq, port);
+
+ /* For each GPIO pin set the unique IRQ handler */
+ for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) {
+ int irqno = gpio->irq_base + (portno << 3) + i;
+
+ dev_dbg(gpio->dev, "handler for IRQ %d on %s\n",
+ irqno, port->name);
+ irq_set_chip_and_handler(irqno, &u300_gpio_irqchip,
+ handle_simple_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ irq_set_chip_data(irqno, port);
+ }
+
+ /* Turns off irq force (test register) for this port */
+ writel(0x0, gpio->base + portno * gpio->stride + ifr);
+
+ list_add_tail(&port->node, &gpio->port_list);
}
+ dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno);
+
+ err = gpiochip_add(&gpio->chip);
+ if (err) {
+ dev_err(gpio->dev, "unable to add gpiochip: %d\n", err);
+ goto err_no_chip;
+ }
+
+ platform_set_drvdata(pdev, gpio);
return 0;
- err_no_irq:
- for (i = 0; i < num_irqs; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- err_no_ioremap:
- release_mem_region(memres->start, resource_size(memres));
- err_no_ioregion:
- err_no_resource:
- clk_disable(clk);
- err_no_clk_enable:
- clk_put(clk);
- err_no_clk:
- dev_info(gpiodev, "module ERROR:%d\n", err);
+err_no_chip:
+err_no_port:
+ u300_gpio_free_ports(gpio);
+err_unknown_variant:
+ iounmap(gpio->base);
+err_no_ioremap:
+ release_mem_region(gpio->memres->start, resource_size(gpio->memres));
+err_no_ioregion:
+err_no_resource:
+ clk_disable(gpio->clk);
+err_no_clk_enable:
+ clk_put(gpio->clk);
+err_no_clk:
+ kfree(gpio);
+ dev_info(&pdev->dev, "module ERROR:%d\n", err);
return err;
}
-static int __exit gpio_remove(struct platform_device *pdev)
+static int __exit u300_gpio_remove(struct platform_device *pdev)
{
- int i;
+ struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+ struct u300_gpio *gpio = platform_get_drvdata(pdev);
+ int err;
/* Turn off the GPIO block */
- writel(0x00000000U, virtbase + U300_GPIO_CR);
- for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- release_mem_region(memres->start, resource_size(memres));
- clk_disable(clk);
- clk_put(clk);
+ if (plat->variant == U300_GPIO_COH901335)
+ writel(0x00000000U, gpio->base + U300_335_CR);
+ if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+ plat->variant == U300_GPIO_COH901571_3_BS365)
+ writel(0x00000000U, gpio->base + U300_571_CR);
+
+ err = gpiochip_remove(&gpio->chip);
+ if (err < 0) {
+ dev_err(gpio->dev, "unable to remove gpiochip: %d\n", err);
+ return err;
+ }
+ u300_gpio_free_ports(gpio);
+ iounmap(gpio->base);
+ release_mem_region(gpio->memres->start,
+ resource_size(gpio->memres));
+ clk_disable(gpio->clk);
+ clk_put(gpio->clk);
+ platform_set_drvdata(pdev, NULL);
+ kfree(gpio);
return 0;
}
-static struct platform_driver gpio_driver = {
+static struct platform_driver u300_gpio_driver = {
.driver = {
.name = "u300-gpio",
},
- .remove = __exit_p(gpio_remove),
+ .remove = __exit_p(u300_gpio_remove),
};
static int __init u300_gpio_init(void)
{
- return platform_driver_probe(&gpio_driver, gpio_probe);
+ return platform_driver_probe(&u300_gpio_driver, u300_gpio_probe);
}
static void __exit u300_gpio_exit(void)
{
- platform_driver_unregister(&gpio_driver);
+ platform_driver_unregister(&u300_gpio_driver);
}
arch_initcall(u300_gpio_init);
module_exit(u300_gpio_exit);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-
-#ifdef U300_COH901571_3
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
-#endif
-
-#ifdef U300_COH901335
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
-#endif
-
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335/COH 901 571/3 GPIO driver");
MODULE_LICENSE("GPL");
mutex_lock(&dev->mode_config.mutex);
drm_mode_object_put(dev, &connector->base);
list_del(&connector->head);
+ dev->mode_config.num_connector--;
mutex_unlock(&dev->mode_config.mutex);
}
EXPORT_SYMBOL(drm_connector_cleanup);
mutex_lock(&dev->mode_config.mutex);
drm_mode_object_put(dev, &encoder->base);
list_del(&encoder->head);
+ dev->mode_config.num_encoder--;
mutex_unlock(&dev->mode_config.mutex);
}
EXPORT_SYMBOL(drm_encoder_cleanup);
{
printk(KERN_ERR "panic occurred, switching back to text console\n");
return drm_fb_helper_force_kernel_mode();
- return 0;
}
EXPORT_SYMBOL(drm_fb_helper_panic);
MODULE_PARM_DESC(i915_enable_rc6,
"Enable power-saving render C-state 6 (default: true)");
-unsigned int i915_enable_fbc __read_mostly = 1;
+unsigned int i915_enable_fbc __read_mostly = -1;
module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
MODULE_PARM_DESC(i915_enable_fbc,
"Enable frame buffer compression for power savings "
- "(default: false)");
+ "(default: -1 (use per-chip default))");
unsigned int i915_lvds_downclock __read_mostly = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
int pp_reg, lvds_reg;
u32 val;
enum pipe panel_pipe = PIPE_A;
- bool locked = locked;
+ bool locked = true;
if (HAS_PCH_SPLIT(dev_priv->dev)) {
pp_reg = PCH_PP_CONTROL;
struct drm_framebuffer *fb;
struct intel_framebuffer *intel_fb;
struct drm_i915_gem_object *obj;
+ int enable_fbc;
DRM_DEBUG_KMS("\n");
intel_fb = to_intel_framebuffer(fb);
obj = intel_fb->obj;
- if (!i915_enable_fbc) {
- DRM_DEBUG_KMS("fbc disabled per module param (default off)\n");
+ enable_fbc = i915_enable_fbc;
+ if (enable_fbc < 0) {
+ DRM_DEBUG_KMS("fbc set to per-chip default\n");
+ enable_fbc = 1;
+ if (INTEL_INFO(dev)->gen <= 5)
+ enable_fbc = 0;
+ }
+ if (!enable_fbc) {
+ DRM_DEBUG_KMS("fbc disabled per module param\n");
dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
goto out_disable;
}
bpc = 6; /* min is 18bpp */
break;
case 24:
- bpc = min((unsigned int)8, display_bpc);
+ bpc = 8;
break;
case 30:
- bpc = min((unsigned int)10, display_bpc);
+ bpc = 10;
break;
case 48:
- bpc = min((unsigned int)12, display_bpc);
+ bpc = 12;
break;
default:
DRM_DEBUG("unsupported depth, assuming 24 bits\n");
break;
}
+ display_bpc = min(display_bpc, bpc);
+
DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n",
bpc, display_bpc);
- *pipe_bpp = bpc * 3;
+ *pipe_bpp = display_bpc * 3;
return display_bpc != bpc;
}
intel_encoder_clones(dev, encoder->clone_mask);
}
- intel_panel_setup_backlight(dev);
-
/* disable all the possible outputs/crtcs before entering KMS mode */
drm_helper_disable_unused_functions(dev);
}
struct drm_connector *connector,
struct intel_load_detect_pipe *old);
-extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB);
-extern int intel_sdvo_supports_hotplug(struct drm_connector *connector);
-extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable);
extern void intelfb_restore(void);
extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno);
*/
uint16_t attached_output;
+ /*
+ * Hotplug activation bits for this device
+ */
+ uint8_t hotplug_active[2];
+
/**
* This is used to select the color range of RBG outputs in HDMI mode.
* It is only valid when using TMDS encoding and 8 bit per color mode.
return true;
}
-/* No use! */
-#if 0
-struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB)
-{
- struct drm_connector *connector = NULL;
- struct intel_sdvo *iout = NULL;
- struct intel_sdvo *sdvo;
-
- /* find the sdvo connector */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- iout = to_intel_sdvo(connector);
-
- if (iout->type != INTEL_OUTPUT_SDVO)
- continue;
-
- sdvo = iout->dev_priv;
-
- if (sdvo->sdvo_reg == SDVOB && sdvoB)
- return connector;
-
- if (sdvo->sdvo_reg == SDVOC && !sdvoB)
- return connector;
-
- }
-
- return NULL;
-}
-
-int intel_sdvo_supports_hotplug(struct drm_connector *connector)
+static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo)
{
u8 response[2];
- u8 status;
- struct intel_sdvo *intel_sdvo;
- DRM_DEBUG_KMS("\n");
-
- if (!connector)
- return 0;
-
- intel_sdvo = to_intel_sdvo(connector);
return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
&response, 2) && response[0];
}
-void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
+static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder)
{
- u8 response[2];
- u8 status;
- struct intel_sdvo *intel_sdvo = to_intel_sdvo(connector);
-
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
- intel_sdvo_read_response(intel_sdvo, &response, 2);
-
- if (on) {
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
- status = intel_sdvo_read_response(intel_sdvo, &response, 2);
-
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
- } else {
- response[0] = 0;
- response[1] = 0;
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
- }
+ struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
- intel_sdvo_read_response(intel_sdvo, &response, 2);
+ intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2);
}
-#endif
static bool
intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo)
{
struct drm_encoder *encoder = &intel_sdvo->base.base;
struct drm_connector *connector;
+ struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
struct intel_connector *intel_connector;
struct intel_sdvo_connector *intel_sdvo_connector;
intel_connector = &intel_sdvo_connector->base;
connector = &intel_connector->base;
- connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+ if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) {
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ intel_sdvo->hotplug_active[0] |= 1 << device;
+ /* Some SDVO devices have one-shot hotplug interrupts.
+ * Ensure that they get re-enabled when an interrupt happens.
+ */
+ intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
+ intel_sdvo_enable_hotplug(intel_encoder);
+ }
+ else
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
goto err;
+ /* Set up hotplug command - note paranoia about contents of reply.
+ * We assume that the hardware is in a sane state, and only touch
+ * the bits we think we understand.
+ */
+ intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
+ &intel_sdvo->hotplug_active, 2);
+ intel_sdvo->hotplug_active[0] &= ~0x3;
+
if (intel_sdvo_output_setup(intel_sdvo,
intel_sdvo->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
nouveau_gpuobj_ref(NULL, &obj);
if (ret)
return ret;
- } else {
+ } else
+ if (USE_SEMA(dev)) {
/* map fence bo into channel's vm */
ret = nouveau_bo_vma_add(dev_priv->fence.bo, chan->vm,
&chan->fence.vma);
return -ENOMEM;
nvbe->ttm_alloced = kmalloc(sizeof(bool) * num_pages, GFP_KERNEL);
- if (!nvbe->ttm_alloced)
+ if (!nvbe->ttm_alloced) {
+ kfree(nvbe->pages);
+ nvbe->pages = NULL;
return -ENOMEM;
+ }
nvbe->nr_pages = 0;
while (num_pages--) {
for (j = 0; j < PAGE_SIZE / NV_CTXDMA_PAGE_SIZE; j++, pte++) {
nv_wo32(gpuobj, (pte * 4) + 0, offset_l | 3);
- dma_offset += NV_CTXDMA_PAGE_SIZE;
+ offset_l += NV_CTXDMA_PAGE_SIZE;
}
}
struct drm_device *dev = crtc->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index];
- struct drm_framebuffer *drm_fb = nv_crtc->base.fb;
- struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb);
+ struct drm_framebuffer *drm_fb;
+ struct nouveau_framebuffer *fb;
int arb_burst, arb_lwm;
int ret;
+ NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index);
+
+ /* no fb bound */
+ if (!atomic && !crtc->fb) {
+ NV_DEBUG_KMS(dev, "No FB bound\n");
+ return 0;
+ }
+
+
/* If atomic, we want to switch to the fb we were passed, so
* now we update pointers to do that. (We don't pin; just
* assume we're already pinned and update the base address.)
drm_fb = passed_fb;
fb = nouveau_framebuffer(passed_fb);
} else {
+ drm_fb = crtc->fb;
+ fb = nouveau_framebuffer(crtc->fb);
/* If not atomic, we can go ahead and pin, and unpin the
* old fb we were passed.
*/
struct drm_device *dev = nv_crtc->base.dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_channel *evo = nv50_display(dev)->master;
- struct drm_framebuffer *drm_fb = nv_crtc->base.fb;
- struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb);
+ struct drm_framebuffer *drm_fb;
+ struct nouveau_framebuffer *fb;
int ret;
NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index);
+ /* no fb bound */
+ if (!atomic && !crtc->fb) {
+ NV_DEBUG_KMS(dev, "No FB bound\n");
+ return 0;
+ }
+
/* If atomic, we want to switch to the fb we were passed, so
* now we update pointers to do that. (We don't pin; just
* assume we're already pinned and update the base address.)
drm_fb = passed_fb;
fb = nouveau_framebuffer(passed_fb);
} else {
+ drm_fb = crtc->fb;
+ fb = nouveau_framebuffer(crtc->fb);
/* If not atomic, we can go ahead and pin, and unpin the
* old fb we were passed.
*/
u8 msg[20];
int msg_bytes = send_bytes + 4;
u8 ack;
+ unsigned retry;
if (send_bytes > 16)
return -1;
msg[3] = (msg_bytes << 4) | (send_bytes - 1);
memcpy(&msg[4], send, send_bytes);
- while (1) {
+ for (retry = 0; retry < 4; retry++) {
ret = radeon_process_aux_ch(dig_connector->dp_i2c_bus,
msg, msg_bytes, NULL, 0, delay, &ack);
if (ret < 0)
return ret;
if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
- break;
+ return send_bytes;
else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
udelay(400);
else
return -EIO;
}
- return send_bytes;
+ return -EIO;
}
static int radeon_dp_aux_native_read(struct radeon_connector *radeon_connector,
int msg_bytes = 4;
u8 ack;
int ret;
+ unsigned retry;
msg[0] = address;
msg[1] = address >> 8;
msg[2] = AUX_NATIVE_READ << 4;
msg[3] = (msg_bytes << 4) | (recv_bytes - 1);
- while (1) {
+ for (retry = 0; retry < 4; retry++) {
ret = radeon_process_aux_ch(dig_connector->dp_i2c_bus,
msg, msg_bytes, recv, recv_bytes, delay, &ack);
- if (ret == 0)
- return -EPROTO;
if (ret < 0)
return ret;
if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
return ret;
else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
udelay(400);
+ else if (ret == 0)
+ return -EPROTO;
else
return -EIO;
}
+
+ return -EIO;
}
static void radeon_write_dpcd_reg(struct radeon_connector *radeon_connector,
void evergreen_fini(struct radeon_device *rdev);
static void evergreen_pcie_gen2_enable(struct radeon_device *rdev);
+void evergreen_fix_pci_max_read_req_size(struct radeon_device *rdev)
+{
+ u16 ctl, v;
+ int cap, err;
+
+ cap = pci_pcie_cap(rdev->pdev);
+ if (!cap)
+ return;
+
+ err = pci_read_config_word(rdev->pdev, cap + PCI_EXP_DEVCTL, &ctl);
+ if (err)
+ return;
+
+ v = (ctl & PCI_EXP_DEVCTL_READRQ) >> 12;
+
+ /* if bios or OS sets MAX_READ_REQUEST_SIZE to an invalid value, fix it
+ * to avoid hangs or perfomance issues
+ */
+ if ((v == 0) || (v == 6) || (v == 7)) {
+ ctl &= ~PCI_EXP_DEVCTL_READRQ;
+ ctl |= (2 << 12);
+ pci_write_config_word(rdev->pdev, cap + PCI_EXP_DEVCTL, ctl);
+ }
+}
+
void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc)
{
/* enable the pflip int */
SOFT_RESET_PA |
SOFT_RESET_SH |
SOFT_RESET_VGT |
+ SOFT_RESET_SPI |
SOFT_RESET_SX));
RREG32(GRBM_SOFT_RESET);
mdelay(15);
/* Initialize the ring buffer's read and write pointers */
WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA);
WREG32(CP_RB_RPTR_WR, 0);
- WREG32(CP_RB_WPTR, 0);
+ rdev->cp.wptr = 0;
+ WREG32(CP_RB_WPTR, rdev->cp.wptr);
/* set the wb address wether it's enabled or not */
WREG32(CP_RB_RPTR_ADDR,
WREG32(CP_DEBUG, (1 << 27) | (1 << 28));
rdev->cp.rptr = RREG32(CP_RB_RPTR);
- rdev->cp.wptr = RREG32(CP_RB_WPTR);
evergreen_cp_start(rdev);
rdev->cp.ready = true;
return backend_map;
}
-static void evergreen_program_channel_remap(struct radeon_device *rdev)
-{
- u32 tcp_chan_steer_lo, tcp_chan_steer_hi, mc_shared_chremap, tmp;
-
- tmp = RREG32(MC_SHARED_CHMAP);
- switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
- case 0:
- case 1:
- case 2:
- case 3:
- default:
- /* default mapping */
- mc_shared_chremap = 0x00fac688;
- break;
- }
-
- switch (rdev->family) {
- case CHIP_HEMLOCK:
- case CHIP_CYPRESS:
- case CHIP_BARTS:
- tcp_chan_steer_lo = 0x54763210;
- tcp_chan_steer_hi = 0x0000ba98;
- break;
- case CHIP_JUNIPER:
- case CHIP_REDWOOD:
- case CHIP_CEDAR:
- case CHIP_PALM:
- case CHIP_SUMO:
- case CHIP_SUMO2:
- case CHIP_TURKS:
- case CHIP_CAICOS:
- default:
- tcp_chan_steer_lo = 0x76543210;
- tcp_chan_steer_hi = 0x0000ba98;
- break;
- }
-
- WREG32(TCP_CHAN_STEER_LO, tcp_chan_steer_lo);
- WREG32(TCP_CHAN_STEER_HI, tcp_chan_steer_hi);
- WREG32(MC_SHARED_CHREMAP, mc_shared_chremap);
-}
-
static void evergreen_gpu_init(struct radeon_device *rdev)
{
u32 cc_rb_backend_disable = 0;
WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff));
+ evergreen_fix_pci_max_read_req_size(rdev);
+
cc_gc_shader_pipe_config = RREG32(CC_GC_SHADER_PIPE_CONFIG) & ~2;
cc_gc_shader_pipe_config |=
WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
WREG32(HDP_ADDR_CONFIG, gb_addr_config);
- evergreen_program_channel_remap(rdev);
-
num_shader_engines = ((RREG32(GB_ADDR_CONFIG) & NUM_SHADER_ENGINES(3)) >> 12) + 1;
grbm_gfx_index = INSTANCE_BROADCAST_WRITES;
}
int evergreen_copy_blit(struct radeon_device *rdev,
- uint64_t src_offset, uint64_t dst_offset,
- unsigned num_pages, struct radeon_fence *fence)
+ uint64_t src_offset,
+ uint64_t dst_offset,
+ unsigned num_gpu_pages,
+ struct radeon_fence *fence)
{
int r;
mutex_lock(&rdev->r600_blit.mutex);
rdev->r600_blit.vb_ib = NULL;
- r = evergreen_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+ r = evergreen_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
if (r) {
if (rdev->r600_blit.vb_ib)
radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
mutex_unlock(&rdev->r600_blit.mutex);
return r;
}
- evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE);
+ evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
evergreen_blit_done_copy(rdev, fence);
mutex_unlock(&rdev->r600_blit.mutex);
return 0;
extern void evergreen_mc_program(struct radeon_device *rdev);
extern void evergreen_irq_suspend(struct radeon_device *rdev);
extern int evergreen_mc_init(struct radeon_device *rdev);
+extern void evergreen_fix_pci_max_read_req_size(struct radeon_device *rdev);
#define EVERGREEN_PFP_UCODE_SIZE 1120
#define EVERGREEN_PM4_UCODE_SIZE 1376
return backend_map;
}
-static void cayman_program_channel_remap(struct radeon_device *rdev)
-{
- u32 tcp_chan_steer_lo, tcp_chan_steer_hi, mc_shared_chremap, tmp;
-
- tmp = RREG32(MC_SHARED_CHMAP);
- switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
- case 0:
- case 1:
- case 2:
- case 3:
- default:
- /* default mapping */
- mc_shared_chremap = 0x00fac688;
- break;
- }
-
- switch (rdev->family) {
- case CHIP_CAYMAN:
- default:
- //tcp_chan_steer_lo = 0x54763210
- tcp_chan_steer_lo = 0x76543210;
- tcp_chan_steer_hi = 0x0000ba98;
- break;
- }
-
- WREG32(TCP_CHAN_STEER_LO, tcp_chan_steer_lo);
- WREG32(TCP_CHAN_STEER_HI, tcp_chan_steer_hi);
- WREG32(MC_SHARED_CHREMAP, mc_shared_chremap);
-}
-
static u32 cayman_get_disable_mask_per_asic(struct radeon_device *rdev,
u32 disable_mask_per_se,
u32 max_disable_mask_per_se,
WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff));
+ evergreen_fix_pci_max_read_req_size(rdev);
+
mc_shared_chmap = RREG32(MC_SHARED_CHMAP);
mc_arb_ramcfg = RREG32(MC_ARB_RAMCFG);
WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
WREG32(HDP_ADDR_CONFIG, gb_addr_config);
- cayman_program_channel_remap(rdev);
-
/* primary versions */
WREG32(CC_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(CC_SYS_RB_BACKEND_DISABLE, cc_rb_backend_disable);
SOFT_RESET_PA |
SOFT_RESET_SH |
SOFT_RESET_VGT |
+ SOFT_RESET_SPI |
SOFT_RESET_SX));
RREG32(GRBM_SOFT_RESET);
mdelay(15);
/* Initialize the ring buffer's read and write pointers */
WREG32(CP_RB0_CNTL, tmp | RB_RPTR_WR_ENA);
- WREG32(CP_RB0_WPTR, 0);
+ rdev->cp.wptr = 0;
+ WREG32(CP_RB0_WPTR, rdev->cp.wptr);
/* set the wb address wether it's enabled or not */
WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB0_BASE, rdev->cp.gpu_addr >> 8);
rdev->cp.rptr = RREG32(CP_RB0_RPTR);
- rdev->cp.wptr = RREG32(CP_RB0_WPTR);
/* ring1 - compute only */
/* Set ring buffer size */
/* Initialize the ring buffer's read and write pointers */
WREG32(CP_RB1_CNTL, tmp | RB_RPTR_WR_ENA);
- WREG32(CP_RB1_WPTR, 0);
+ rdev->cp1.wptr = 0;
+ WREG32(CP_RB1_WPTR, rdev->cp1.wptr);
/* set the wb address wether it's enabled or not */
WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB1_BASE, rdev->cp1.gpu_addr >> 8);
rdev->cp1.rptr = RREG32(CP_RB1_RPTR);
- rdev->cp1.wptr = RREG32(CP_RB1_WPTR);
/* ring2 - compute only */
/* Set ring buffer size */
/* Initialize the ring buffer's read and write pointers */
WREG32(CP_RB2_CNTL, tmp | RB_RPTR_WR_ENA);
- WREG32(CP_RB2_WPTR, 0);
+ rdev->cp2.wptr = 0;
+ WREG32(CP_RB2_WPTR, rdev->cp2.wptr);
/* set the wb address wether it's enabled or not */
WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB2_BASE, rdev->cp2.gpu_addr >> 8);
rdev->cp2.rptr = RREG32(CP_RB2_RPTR);
- rdev->cp2.wptr = RREG32(CP_RB2_WPTR);
/* start the rings */
cayman_cp_start(rdev);
int r100_copy_blit(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence)
{
uint32_t cur_pages;
- uint32_t stride_bytes = PAGE_SIZE;
+ uint32_t stride_bytes = RADEON_GPU_PAGE_SIZE;
uint32_t pitch;
uint32_t stride_pixels;
unsigned ndw;
/* radeon pitch is /64 */
pitch = stride_bytes / 64;
stride_pixels = stride_bytes / 4;
- num_loops = DIV_ROUND_UP(num_pages, 8191);
+ num_loops = DIV_ROUND_UP(num_gpu_pages, 8191);
/* Ask for enough room for blit + flush + fence */
ndw = 64 + (10 * num_loops);
DRM_ERROR("radeon: moving bo (%d) asking for %u dw.\n", r, ndw);
return -EINVAL;
}
- while (num_pages > 0) {
- cur_pages = num_pages;
+ while (num_gpu_pages > 0) {
+ cur_pages = num_gpu_pages;
if (cur_pages > 8191) {
cur_pages = 8191;
}
- num_pages -= cur_pages;
+ num_gpu_pages -= cur_pages;
/* pages are in Y direction - height
page width in X direction - width */
radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16));
radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16));
- radeon_ring_write(rdev, num_pages);
- radeon_ring_write(rdev, num_pages);
+ radeon_ring_write(rdev, num_gpu_pages);
+ radeon_ring_write(rdev, num_gpu_pages);
radeon_ring_write(rdev, cur_pages | (stride_pixels << 16));
}
radeon_ring_write(rdev, PACKET0(RADEON_DSTCACHE_CTLSTAT, 0));
/* Force read & write ptr to 0 */
WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA | RADEON_RB_NO_UPDATE);
WREG32(RADEON_CP_RB_RPTR_WR, 0);
- WREG32(RADEON_CP_RB_WPTR, 0);
+ rdev->cp.wptr = 0;
+ WREG32(RADEON_CP_RB_WPTR, rdev->cp.wptr);
/* set the wb address whether it's enabled or not */
WREG32(R_00070C_CP_RB_RPTR_ADDR,
WREG32(RADEON_CP_RB_CNTL, tmp);
udelay(10);
rdev->cp.rptr = RREG32(RADEON_CP_RB_RPTR);
- rdev->cp.wptr = RREG32(RADEON_CP_RB_WPTR);
- /* protect against crazy HW on resume */
- rdev->cp.wptr &= rdev->cp.ptr_mask;
/* Set cp mode to bus mastering & enable cp*/
WREG32(RADEON_CP_CSQ_MODE,
REG_SET(RADEON_INDIRECT2_START, indirect2_start) |
int r200_copy_dma(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence)
{
uint32_t size;
int r = 0;
/* radeon pitch is /64 */
- size = num_pages << PAGE_SHIFT;
+ size = num_gpu_pages << RADEON_GPU_PAGE_SHIFT;
num_loops = DIV_ROUND_UP(size, 0x1FFFFF);
r = radeon_ring_lock(rdev, num_loops * 4 + 64);
if (r) {
/* Initialize the ring buffer's read and write pointers */
WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA);
WREG32(CP_RB_RPTR_WR, 0);
- WREG32(CP_RB_WPTR, 0);
+ rdev->cp.wptr = 0;
+ WREG32(CP_RB_WPTR, rdev->cp.wptr);
/* set the wb address whether it's enabled or not */
WREG32(CP_RB_RPTR_ADDR,
WREG32(CP_DEBUG, (1 << 27) | (1 << 28));
rdev->cp.rptr = RREG32(CP_RB_RPTR);
- rdev->cp.wptr = RREG32(CP_RB_WPTR);
r600_cp_start(rdev);
rdev->cp.ready = true;
}
int r600_copy_blit(struct radeon_device *rdev,
- uint64_t src_offset, uint64_t dst_offset,
- unsigned num_pages, struct radeon_fence *fence)
+ uint64_t src_offset,
+ uint64_t dst_offset,
+ unsigned num_gpu_pages,
+ struct radeon_fence *fence)
{
int r;
mutex_lock(&rdev->r600_blit.mutex);
rdev->r600_blit.vb_ib = NULL;
- r = r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+ r = r600_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
if (r) {
if (rdev->r600_blit.vb_ib)
radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
mutex_unlock(&rdev->r600_blit.mutex);
return r;
}
- r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE);
+ r600_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
r600_blit_done_copy(rdev, fence);
mutex_unlock(&rdev->r600_blit.mutex);
return 0;
#define RADEON_GPU_PAGE_SIZE 4096
#define RADEON_GPU_PAGE_MASK (RADEON_GPU_PAGE_SIZE - 1)
+#define RADEON_GPU_PAGE_SHIFT 12
struct radeon_gart {
dma_addr_t table_addr;
int (*copy_blit)(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence);
int (*copy_dma)(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence);
int (*copy)(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence);
uint32_t (*get_engine_clock)(struct radeon_device *rdev);
void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock);
int r100_copy_blit(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence);
int r100_set_surface_reg(struct radeon_device *rdev, int reg,
uint32_t tiling_flags, uint32_t pitch,
extern int r200_copy_dma(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence);
void r200_set_safe_registers(struct radeon_device *rdev);
int r600_ring_test(struct radeon_device *rdev);
int r600_copy_blit(struct radeon_device *rdev,
uint64_t src_offset, uint64_t dst_offset,
- unsigned num_pages, struct radeon_fence *fence);
+ unsigned num_gpu_pages, struct radeon_fence *fence);
void r600_hpd_init(struct radeon_device *rdev);
void r600_hpd_fini(struct radeon_device *rdev);
bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
void evergreen_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
int evergreen_copy_blit(struct radeon_device *rdev,
uint64_t src_offset, uint64_t dst_offset,
- unsigned num_pages, struct radeon_fence *fence);
+ unsigned num_gpu_pages, struct radeon_fence *fence);
void evergreen_hpd_init(struct radeon_device *rdev);
void evergreen_hpd_fini(struct radeon_device *rdev);
bool evergreen_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
} else {
DRM_INFO("Using generic clock info\n");
+ /* may need to be per card */
+ rdev->clock.max_pixel_clock = 35000;
+
if (rdev->flags & RADEON_IS_IGP) {
p1pll->reference_freq = 1432;
p2pll->reference_freq = 1432;
rdev->pdev->subsystem_device == 0x30a4)
return;
+ /* quirk for rs4xx Compaq Presario V5245EU laptop to make it resume
+ * - it hangs on resume inside the dynclk 1 table.
+ */
+ if (rdev->family == CHIP_RS480 &&
+ rdev->pdev->subsystem_vendor == 0x103c &&
+ rdev->pdev->subsystem_device == 0x30ae)
+ return;
+
/* DYN CLK 1 */
table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
if (table)
if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
int saved_dpms = connector->dpms;
- if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd) &&
- radeon_dp_needs_link_train(radeon_connector))
- drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
- else
+ /* Only turn off the display it it's physically disconnected */
+ if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
+ else if (radeon_dp_needs_link_train(radeon_connector))
+ drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
connector->dpms = saved_dpms;
}
}
(supported_device == ATOM_DEVICE_DFP2_SUPPORT))
return true;
}
+ /* TOSHIBA Satellite L300D with ATI Mobility Radeon x1100
+ * (RS690M) sends data to i2c bus for a HDMI connector that
+ * is not implemented */
+ if ((dev->pdev->device == 0x791f) &&
+ (dev->pdev->subsystem_vendor == 0x1179) &&
+ (dev->pdev->subsystem_device == 0xff68)) {
+ if ((connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
+ (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
+ return true;
+ }
/* Default: no EDID header probe required for DDC probing */
return false;
if (!radeon_dig_connector->edp_on)
atombios_set_edp_panel_power(connector,
ATOM_TRANSMITTER_ACTION_POWER_OFF);
- } else {
- /* need to setup ddc on the bridge */
- if (radeon_connector_encoder_is_dp_bridge(connector)) {
+ } else if (radeon_connector_encoder_is_dp_bridge(connector)) {
+ /* DP bridges are always DP */
+ radeon_dig_connector->dp_sink_type = CONNECTOR_OBJECT_ID_DISPLAYPORT;
+ /* get the DPCD from the bridge */
+ radeon_dp_getdpcd(radeon_connector);
+
+ if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
+ ret = connector_status_connected;
+ else {
+ /* need to setup ddc on the bridge */
if (encoder)
radeon_atom_ext_encoder_setup_ddc(encoder);
+ if (radeon_ddc_probe(radeon_connector,
+ radeon_connector->requires_extended_probe))
+ ret = connector_status_connected;
}
+
+ if ((ret == connector_status_disconnected) &&
+ radeon_connector->dac_load_detect) {
+ struct drm_encoder *encoder = radeon_best_single_encoder(connector);
+ struct drm_encoder_helper_funcs *encoder_funcs;
+ if (encoder) {
+ encoder_funcs = encoder->helper_private;
+ ret = encoder_funcs->detect(encoder, connector);
+ }
+ }
+ } else {
radeon_dig_connector->dp_sink_type = radeon_dp_getsinktype(radeon_connector);
if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
ret = connector_status_connected;
ret = connector_status_connected;
}
}
-
- if ((ret == connector_status_disconnected) &&
- radeon_connector->dac_load_detect) {
- struct drm_encoder *encoder = radeon_best_single_encoder(connector);
- struct drm_encoder_helper_funcs *encoder_funcs;
- if (encoder) {
- encoder_funcs = encoder->helper_private;
- ret = encoder_funcs->detect(encoder, connector);
- }
- }
}
radeon_connector_update_scratch_regs(connector, ret);
int xorigin = 0, yorigin = 0;
int w = radeon_crtc->cursor_width;
- if (x < 0)
- xorigin = -x + 1;
- if (y < 0)
- yorigin = -y + 1;
- if (xorigin >= CURSOR_WIDTH)
- xorigin = CURSOR_WIDTH - 1;
- if (yorigin >= CURSOR_HEIGHT)
- yorigin = CURSOR_HEIGHT - 1;
-
if (ASIC_IS_AVIVO(rdev)) {
- int i = 0;
- struct drm_crtc *crtc_p;
-
/* avivo cursor are offset into the total surface */
x += crtc->x;
y += crtc->y;
- DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);
+ }
+ DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);
+
+ if (x < 0) {
+ xorigin = min(-x, CURSOR_WIDTH - 1);
+ x = 0;
+ }
+ if (y < 0) {
+ yorigin = min(-y, CURSOR_HEIGHT - 1);
+ y = 0;
+ }
+
+ if (ASIC_IS_AVIVO(rdev)) {
+ int i = 0;
+ struct drm_crtc *crtc_p;
/* avivo cursor image can't end on 128 pixel boundary or
* go past the end of the frame if both crtcs are enabled
radeon_lock_cursor(crtc, true);
if (ASIC_IS_DCE4(rdev)) {
- WREG32(EVERGREEN_CUR_POSITION + radeon_crtc->crtc_offset,
- ((xorigin ? 0 : x) << 16) |
- (yorigin ? 0 : y));
+ WREG32(EVERGREEN_CUR_POSITION + radeon_crtc->crtc_offset, (x << 16) | y);
WREG32(EVERGREEN_CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin);
WREG32(EVERGREEN_CUR_SIZE + radeon_crtc->crtc_offset,
((w - 1) << 16) | (radeon_crtc->cursor_height - 1));
} else if (ASIC_IS_AVIVO(rdev)) {
- WREG32(AVIVO_D1CUR_POSITION + radeon_crtc->crtc_offset,
- ((xorigin ? 0 : x) << 16) |
- (yorigin ? 0 : y));
+ WREG32(AVIVO_D1CUR_POSITION + radeon_crtc->crtc_offset, (x << 16) | y);
WREG32(AVIVO_D1CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin);
WREG32(AVIVO_D1CUR_SIZE + radeon_crtc->crtc_offset,
((w - 1) << 16) | (radeon_crtc->cursor_height - 1));
| yorigin));
WREG32(RADEON_CUR_HORZ_VERT_POSN + radeon_crtc->crtc_offset,
(RADEON_CUR_LOCK
- | ((xorigin ? 0 : x) << 16)
- | (yorigin ? 0 : y)));
+ | (x << 16)
+ | y));
/* offset is from DISP(2)_BASE_ADDRESS */
WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (radeon_crtc->legacy_cursor_offset +
(yorigin * 256)));
mc->mc_vram_size = mc->aper_size;
}
mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
+ if (radeon_vram_limit && radeon_vram_limit < mc->real_vram_size)
+ mc->real_vram_size = radeon_vram_limit;
dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n",
mc->mc_vram_size >> 20, mc->vram_start,
mc->vram_end, mc->real_vram_size >> 20);
spin_lock_irqsave(&dev->event_lock, flags);
radeon_crtc->unpin_work = NULL;
unlock_free:
- drm_gem_object_unreference_unlocked(old_radeon_fb->obj);
spin_unlock_irqrestore(&dev->event_lock, flags);
+ drm_gem_object_unreference_unlocked(old_radeon_fb->obj);
radeon_fence_unref(&work->fence);
kfree(work);
radeon_router_select_ddc_port(radeon_connector);
if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
- (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
+ (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP) ||
+ radeon_connector_encoder_is_dp_bridge(&radeon_connector->base)) {
struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
+
if ((dig->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT ||
dig->dp_sink_type == CONNECTOR_OBJECT_ID_eDP) && dig->dp_i2c_bus)
- radeon_connector->edid = drm_get_edid(&radeon_connector->base, &dig->dp_i2c_bus->adapter);
- }
- if (!radeon_connector->ddc_bus)
- return -1;
- if (!radeon_connector->edid) {
- radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter);
+ radeon_connector->edid = drm_get_edid(&radeon_connector->base,
+ &dig->dp_i2c_bus->adapter);
+ else if (radeon_connector->ddc_bus && !radeon_connector->edid)
+ radeon_connector->edid = drm_get_edid(&radeon_connector->base,
+ &radeon_connector->ddc_bus->adapter);
+ } else {
+ if (radeon_connector->ddc_bus && !radeon_connector->edid)
+ radeon_connector->edid = drm_get_edid(&radeon_connector->base,
+ &radeon_connector->ddc_bus->adapter);
}
if (!radeon_connector->edid) {
switch (mode) {
case DRM_MODE_DPMS_ON:
args.ucAction = ATOM_ENABLE;
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ /* workaround for DVOOutputControl on some RS690 systems */
+ if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) {
+ u32 reg = RREG32(RADEON_BIOS_3_SCRATCH);
+ WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE);
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ WREG32(RADEON_BIOS_3_SCRATCH, reg);
+ } else
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
args.ucAction = ATOM_LCD_BLON;
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
size = 1024 * 1024;
/* Number of tests =
- * (Total GTT - IB pool - writeback page - ring buffer) / test size
+ * (Total GTT - IB pool - writeback page - ring buffers) / test size
*/
- n = ((u32)(rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE -
- rdev->cp.ring_size)) / size;
+ n = rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - rdev->cp.ring_size;
+ if (rdev->wb.wb_obj)
+ n -= RADEON_GPU_PAGE_SIZE;
+ if (rdev->ih.ring_obj)
+ n -= rdev->ih.ring_size;
+ n /= size;
gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL);
if (!gtt_obj) {
gtt_start++, vram_start++) {
if (*vram_start != gtt_start) {
DRM_ERROR("Incorrect GTT->VRAM copy %d: Got 0x%p, "
- "expected 0x%p (GTT map 0x%p-0x%p)\n",
- i, *vram_start, gtt_start, gtt_map,
- gtt_end);
+ "expected 0x%p (GTT/VRAM offset "
+ "0x%16llx/0x%16llx)\n",
+ i, *vram_start, gtt_start,
+ (unsigned long long)
+ (gtt_addr - rdev->mc.gtt_start +
+ (void*)gtt_start - gtt_map),
+ (unsigned long long)
+ (vram_addr - rdev->mc.vram_start +
+ (void*)gtt_start - gtt_map));
radeon_bo_kunmap(vram_obj);
goto out_cleanup;
}
gtt_start++, vram_start++) {
if (*gtt_start != vram_start) {
DRM_ERROR("Incorrect VRAM->GTT copy %d: Got 0x%p, "
- "expected 0x%p (VRAM map 0x%p-0x%p)\n",
- i, *gtt_start, vram_start, vram_map,
- vram_end);
+ "expected 0x%p (VRAM/GTT offset "
+ "0x%16llx/0x%16llx)\n",
+ i, *gtt_start, vram_start,
+ (unsigned long long)
+ (vram_addr - rdev->mc.vram_start +
+ (void*)vram_start - vram_map),
+ (unsigned long long)
+ (gtt_addr - rdev->mc.gtt_start +
+ (void*)vram_start - vram_map));
radeon_bo_kunmap(gtt_obj[i]);
goto out_cleanup;
}
DRM_ERROR("Trying to move memory with CP turned off.\n");
return -EINVAL;
}
- r = radeon_copy(rdev, old_start, new_start, new_mem->num_pages, fence);
+
+ BUILD_BUG_ON((PAGE_SIZE % RADEON_GPU_PAGE_SIZE) != 0);
+
+ r = radeon_copy(rdev, old_start, new_start,
+ new_mem->num_pages * (PAGE_SIZE / RADEON_GPU_PAGE_SIZE), /* GPU pages */
+ fence);
/* FIXME: handle copy error */
r = ttm_bo_move_accel_cleanup(bo, (void *)fence, NULL,
evict, no_wait_reserve, no_wait_gpu, new_mem);
return -EINVAL;
mem->bus.base = rdev->mc.aper_base;
mem->bus.is_iomem = true;
+#ifdef __alpha__
+ /*
+ * Alpha: use bus.addr to hold the ioremap() return,
+ * so we can modify bus.base below.
+ */
+ if (mem->placement & TTM_PL_FLAG_WC)
+ mem->bus.addr =
+ ioremap_wc(mem->bus.base + mem->bus.offset,
+ mem->bus.size);
+ else
+ mem->bus.addr =
+ ioremap_nocache(mem->bus.base + mem->bus.offset,
+ mem->bus.size);
+
+ /*
+ * Alpha: Use just the bus offset plus
+ * the hose/domain memory base for bus.base.
+ * It then can be used to build PTEs for VRAM
+ * access, as done in ttm_bo_vm_fault().
+ */
+ mem->bus.base = (mem->bus.base & 0x0ffffffffUL) +
+ rdev->ddev->hose->dense_mem_base;
+#endif
break;
default:
return -EINVAL;
return backend_map;
}
-static void rv770_program_channel_remap(struct radeon_device *rdev)
-{
- u32 tcp_chan_steer, mc_shared_chremap, tmp;
- bool force_no_swizzle;
-
- switch (rdev->family) {
- case CHIP_RV770:
- case CHIP_RV730:
- force_no_swizzle = false;
- break;
- case CHIP_RV710:
- case CHIP_RV740:
- default:
- force_no_swizzle = true;
- break;
- }
-
- tmp = RREG32(MC_SHARED_CHMAP);
- switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
- case 0:
- case 1:
- default:
- /* default mapping */
- mc_shared_chremap = 0x00fac688;
- break;
- case 2:
- case 3:
- if (force_no_swizzle)
- mc_shared_chremap = 0x00fac688;
- else
- mc_shared_chremap = 0x00bbc298;
- break;
- }
-
- if (rdev->family == CHIP_RV740)
- tcp_chan_steer = 0x00ef2a60;
- else
- tcp_chan_steer = 0x00fac688;
-
- /* RV770 CE has special chremap setup */
- if (rdev->pdev->device == 0x944e) {
- tcp_chan_steer = 0x00b08b08;
- mc_shared_chremap = 0x00b08b08;
- }
-
- WREG32(TCP_CHAN_STEER, tcp_chan_steer);
- WREG32(MC_SHARED_CHREMAP, mc_shared_chremap);
-}
-
static void rv770_gpu_init(struct radeon_device *rdev)
{
int i, j, num_qd_pipes;
WREG32(DCP_TILING_CONFIG, (gb_tiling_config & 0xffff));
WREG32(HDP_TILING_CONFIG, (gb_tiling_config & 0xffff));
- rv770_program_channel_remap(rdev);
-
WREG32(CC_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(CC_GC_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
WREG32(GC_USER_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
ret = ttm_tt_set_user(bo->ttm, current,
bo->buffer_start, bo->num_pages);
- if (unlikely(ret != 0))
+ if (unlikely(ret != 0)) {
ttm_tt_destroy(bo->ttm);
+ bo->ttm = NULL;
+ }
break;
default:
printk(KERN_ERR TTM_PFX "Illegal buffer object type\n");
* Create and bind a ttm if required.
*/
- if (!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED) && (bo->ttm == NULL)) {
- ret = ttm_bo_add_ttm(bo, false);
- if (ret)
- goto out_err;
+ if (!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED)) {
+ if (bo->ttm == NULL) {
+ bool zero = !(old_man->flags & TTM_MEMTYPE_FLAG_FIXED);
+ ret = ttm_bo_add_ttm(bo, zero);
+ if (ret)
+ goto out_err;
+ }
ret = ttm_tt_set_placement_caching(bo->ttm, mem->placement);
if (ret)
if (ret)
return ret;
- ttm_bo_free_old_node(bo);
if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) &&
(bo->ttm != NULL)) {
ttm_tt_unbind(bo->ttm);
ttm_tt_destroy(bo->ttm);
bo->ttm = NULL;
}
+ ttm_bo_free_old_node(bo);
} else {
/**
* This should help pipeline ordinary buffer moves.
config HID_WIIMOTE
tristate "Nintendo Wii Remote support"
depends on BT_HIDP
+ depends on LEDS_CLASS
---help---
Support for the Nintendo Wii Remote bluetooth device.
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_JIS),
+ .driver_data = APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
#define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245
#define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246
#define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247
+#define USB_DEVICE_ID_APPLE_ALU_REVB_ANSI 0x024f
+#define USB_DEVICE_ID_APPLE_ALU_REVB_ISO 0x0250
+#define USB_DEVICE_ID_APPLE_ALU_REVB_JIS 0x0251
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
#define USB_DEVICE_ID_PENPOWER 0x00f4
#define USB_VENDOR_ID_GREENASIA 0x0e8f
+#define USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD 0x3013
#define USB_VENDOR_ID_GRETAGMACBETH 0x0971
#define USB_DEVICE_ID_GRETAGMACBETH_HUEY 0x2005
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
#define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600
+#define USB_VENDOR_ID_SIGMA_MICRO 0x1c4f
+#define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD 0x0002
+
#define USB_VENDOR_ID_SKYCABLE 0x1223
#define USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER 0x3F07
#define NO_TOUCHES -1
#define SINGLE_TOUCH_UP -2
+/* Touch surface information. Dimension is in hundredths of a mm, min and max
+ * are in units. */
+#define MOUSE_DIMENSION_X (float)9056
+#define MOUSE_MIN_X -1100
+#define MOUSE_MAX_X 1258
+#define MOUSE_RES_X ((MOUSE_MAX_X - MOUSE_MIN_X) / (MOUSE_DIMENSION_X / 100))
+#define MOUSE_DIMENSION_Y (float)5152
+#define MOUSE_MIN_Y -1589
+#define MOUSE_MAX_Y 2047
+#define MOUSE_RES_Y ((MOUSE_MAX_Y - MOUSE_MIN_Y) / (MOUSE_DIMENSION_Y / 100))
+
+#define TRACKPAD_DIMENSION_X (float)13000
+#define TRACKPAD_MIN_X -2909
+#define TRACKPAD_MAX_X 3167
+#define TRACKPAD_RES_X \
+ ((TRACKPAD_MAX_X - TRACKPAD_MIN_X) / (TRACKPAD_DIMENSION_X / 100))
+#define TRACKPAD_DIMENSION_Y (float)11000
+#define TRACKPAD_MIN_Y -2456
+#define TRACKPAD_MAX_Y 2565
+#define TRACKPAD_RES_Y \
+ ((TRACKPAD_MAX_Y - TRACKPAD_MIN_Y) / (TRACKPAD_DIMENSION_Y / 100))
+
/**
* struct magicmouse_sc - Tracks Magic Mouse-specific data.
* @input: Input device through which we report events.
* inverse of the reported Y.
*/
if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) {
- input_set_abs_params(input, ABS_MT_POSITION_X, -1100,
- 1358, 4, 0);
- input_set_abs_params(input, ABS_MT_POSITION_Y, -1589,
- 2047, 4, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_X,
+ MOUSE_MIN_X, MOUSE_MAX_X, 4, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y,
+ MOUSE_MIN_Y, MOUSE_MAX_Y, 4, 0);
+
+ input_abs_set_res(input, ABS_MT_POSITION_X,
+ MOUSE_RES_X);
+ input_abs_set_res(input, ABS_MT_POSITION_Y,
+ MOUSE_RES_Y);
} else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */
- input_set_abs_params(input, ABS_X, -2909, 3167, 4, 0);
- input_set_abs_params(input, ABS_Y, -2456, 2565, 4, 0);
- input_set_abs_params(input, ABS_MT_POSITION_X, -2909,
- 3167, 4, 0);
- input_set_abs_params(input, ABS_MT_POSITION_Y, -2456,
- 2565, 4, 0);
+ input_set_abs_params(input, ABS_X, TRACKPAD_MIN_X,
+ TRACKPAD_MAX_X, 4, 0);
+ input_set_abs_params(input, ABS_Y, TRACKPAD_MIN_Y,
+ TRACKPAD_MAX_Y, 4, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_X,
+ TRACKPAD_MIN_X, TRACKPAD_MAX_X, 4, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y,
+ TRACKPAD_MIN_Y, TRACKPAD_MAX_Y, 4, 0);
+
+ input_abs_set_res(input, ABS_X, TRACKPAD_RES_X);
+ input_abs_set_res(input, ABS_Y, TRACKPAD_RES_Y);
+ input_abs_set_res(input, ABS_MT_POSITION_X,
+ TRACKPAD_RES_X);
+ input_abs_set_res(input, ABS_MT_POSITION_Y,
+ TRACKPAD_RES_Y);
}
input_set_events_per_packet(input, 60);
}
report->size = 6;
+ /*
+ * Some devices repond with 'invalid report id' when feature
+ * report switching it into multitouch mode is sent to it.
+ *
+ * This results in -EIO from the _raw low-level transport callback,
+ * but there seems to be no other way of switching the mode.
+ * Thus the super-ugly hacky success check below.
+ */
ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature),
HID_FEATURE_REPORT);
- if (ret != sizeof(feature)) {
+ if (ret != -EIO && ret != sizeof(feature)) {
hid_err(hdev, "unable to request touch data (%d)\n", ret);
goto err_stop_hw;
}
if (ret) {
hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n",
ret);
- /*
- * battery attribute is not critical for the tablet, but if it
- * failed then there is no need to create ac attribute
- */
- goto move_on;
+ goto err_battery;
}
wdata->ac.properties = wacom_ac_props;
if (ret) {
hid_warn(hdev,
"can't create ac battery attribute, err: %d\n", ret);
- /*
- * ac attribute is not critical for the tablet, but if it
- * failed then we don't want to battery attribute to exist
- */
- power_supply_unregister(&wdata->battery);
+ goto err_ac;
}
-
-move_on:
#endif
hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
input = hidinput->input;
+ __set_bit(INPUT_PROP_POINTER, input->propbit);
+
/* Basics */
input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
return 0;
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+err_ac:
+ power_supply_unregister(&wdata->battery);
+err_battery:
+ device_remove_file(&hdev->dev, &dev_attr_speed);
+ hid_hw_stop(hdev);
+#endif
err_free:
kfree(wdata);
return ret;
#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
struct wacom_data *wdata = hid_get_drvdata(hdev);
#endif
+ device_remove_file(&hdev->dev, &dev_attr_speed);
hid_hw_stop(hdev);
#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
* any later version.
*/
-#include <linux/atomic.h>
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/input.h>
+#include <linux/leds.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include "hid-ids.h"
};
struct wiimote_data {
- atomic_t ready;
struct hid_device *hdev;
struct input_dev *input;
+ struct led_classdev *leds[4];
spinlock_t qlock;
__u8 head;
#define WIIPROTO_FLAGS_LEDS (WIIPROTO_FLAG_LED1 | WIIPROTO_FLAG_LED2 | \
WIIPROTO_FLAG_LED3 | WIIPROTO_FLAG_LED4)
+/* return flag for led \num */
+#define WIIPROTO_FLAG_LED(num) (WIIPROTO_FLAG_LED1 << (num - 1))
+
enum wiiproto_reqs {
+ WIIPROTO_REQ_NULL = 0x0,
WIIPROTO_REQ_LED = 0x11,
+ WIIPROTO_REQ_DRM = 0x12,
+ WIIPROTO_REQ_STATUS = 0x20,
+ WIIPROTO_REQ_RETURN = 0x22,
WIIPROTO_REQ_DRM_K = 0x30,
};
BTN_MODE, /* WIIPROTO_KEY_HOME */
};
-#define dev_to_wii(pdev) hid_get_drvdata(container_of(pdev, struct hid_device, \
- dev))
-
static ssize_t wiimote_hid_send(struct hid_device *hdev, __u8 *buffer,
size_t count)
{
wiimote_queue(wdata, cmd, sizeof(cmd));
}
-#define wiifs_led_show_set(num) \
-static ssize_t wiifs_led_show_##num(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct wiimote_data *wdata = dev_to_wii(dev); \
- unsigned long flags; \
- int state; \
- \
- if (!atomic_read(&wdata->ready)) \
- return -EBUSY; \
- \
- spin_lock_irqsave(&wdata->state.lock, flags); \
- state = !!(wdata->state.flags & WIIPROTO_FLAG_LED##num); \
- spin_unlock_irqrestore(&wdata->state.lock, flags); \
- \
- return sprintf(buf, "%d\n", state); \
-} \
-static ssize_t wiifs_led_set_##num(struct device *dev, \
- struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- struct wiimote_data *wdata = dev_to_wii(dev); \
- int tmp = simple_strtoul(buf, NULL, 10); \
- unsigned long flags; \
- __u8 state; \
- \
- if (!atomic_read(&wdata->ready)) \
- return -EBUSY; \
- \
- spin_lock_irqsave(&wdata->state.lock, flags); \
- \
- state = wdata->state.flags; \
- \
- if (tmp) \
- wiiproto_req_leds(wdata, state | WIIPROTO_FLAG_LED##num);\
- else \
- wiiproto_req_leds(wdata, state & ~WIIPROTO_FLAG_LED##num);\
- \
- spin_unlock_irqrestore(&wdata->state.lock, flags); \
- \
- return count; \
-} \
-static DEVICE_ATTR(led##num, S_IRUGO | S_IWUSR, wiifs_led_show_##num, \
- wiifs_led_set_##num)
-
-wiifs_led_show_set(1);
-wiifs_led_show_set(2);
-wiifs_led_show_set(3);
-wiifs_led_show_set(4);
+/*
+ * Check what peripherals of the wiimote are currently
+ * active and select a proper DRM that supports all of
+ * the requested data inputs.
+ */
+static __u8 select_drm(struct wiimote_data *wdata)
+{
+ return WIIPROTO_REQ_DRM_K;
+}
+
+static void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm)
+{
+ __u8 cmd[3];
+
+ if (drm == WIIPROTO_REQ_NULL)
+ drm = select_drm(wdata);
+
+ cmd[0] = WIIPROTO_REQ_DRM;
+ cmd[1] = 0;
+ cmd[2] = drm;
+
+ wiimote_queue(wdata, cmd, sizeof(cmd));
+}
+
+static enum led_brightness wiimote_leds_get(struct led_classdev *led_dev)
+{
+ struct wiimote_data *wdata;
+ struct device *dev = led_dev->dev->parent;
+ int i;
+ unsigned long flags;
+ bool value = false;
+
+ wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev));
+
+ for (i = 0; i < 4; ++i) {
+ if (wdata->leds[i] == led_dev) {
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ value = wdata->state.flags & WIIPROTO_FLAG_LED(i + 1);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+ break;
+ }
+ }
+
+ return value ? LED_FULL : LED_OFF;
+}
+
+static void wiimote_leds_set(struct led_classdev *led_dev,
+ enum led_brightness value)
+{
+ struct wiimote_data *wdata;
+ struct device *dev = led_dev->dev->parent;
+ int i;
+ unsigned long flags;
+ __u8 state, flag;
+
+ wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev));
+
+ for (i = 0; i < 4; ++i) {
+ if (wdata->leds[i] == led_dev) {
+ flag = WIIPROTO_FLAG_LED(i + 1);
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ state = wdata->state.flags;
+ if (value == LED_OFF)
+ wiiproto_req_leds(wdata, state & ~flag);
+ else
+ wiiproto_req_leds(wdata, state | flag);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+ break;
+ }
+ }
+}
static int wiimote_input_event(struct input_dev *dev, unsigned int type,
unsigned int code, int value)
+{
+ return 0;
+}
+
+static int wiimote_input_open(struct input_dev *dev)
{
struct wiimote_data *wdata = input_get_drvdata(dev);
- if (!atomic_read(&wdata->ready))
- return -EBUSY;
- /* smp_rmb: Make sure wdata->xy is available when wdata->ready is 1 */
- smp_rmb();
+ return hid_hw_open(wdata->hdev);
+}
- return 0;
+static void wiimote_input_close(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+
+ hid_hw_close(wdata->hdev);
}
static void handler_keys(struct wiimote_data *wdata, const __u8 *payload)
input_sync(wdata->input);
}
+static void handler_status(struct wiimote_data *wdata, const __u8 *payload)
+{
+ handler_keys(wdata, payload);
+
+ /* on status reports the drm is reset so we need to resend the drm */
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+}
+
+static void handler_return(struct wiimote_data *wdata, const __u8 *payload)
+{
+ __u8 err = payload[3];
+ __u8 cmd = payload[2];
+
+ handler_keys(wdata, payload);
+
+ if (err)
+ hid_warn(wdata->hdev, "Remote error %hhu on req %hhu\n", err,
+ cmd);
+}
+
struct wiiproto_handler {
__u8 id;
size_t size;
};
static struct wiiproto_handler handlers[] = {
+ { .id = WIIPROTO_REQ_STATUS, .size = 6, .func = handler_status },
+ { .id = WIIPROTO_REQ_RETURN, .size = 4, .func = handler_return },
{ .id = WIIPROTO_REQ_DRM_K, .size = 2, .func = handler_keys },
{ .id = 0 }
};
int i;
unsigned long flags;
- if (!atomic_read(&wdata->ready))
- return -EBUSY;
- /* smp_rmb: Make sure wdata->xy is available when wdata->ready is 1 */
- smp_rmb();
-
if (size < 1)
return -EINVAL;
return 0;
}
+static void wiimote_leds_destroy(struct wiimote_data *wdata)
+{
+ int i;
+ struct led_classdev *led;
+
+ for (i = 0; i < 4; ++i) {
+ if (wdata->leds[i]) {
+ led = wdata->leds[i];
+ wdata->leds[i] = NULL;
+ led_classdev_unregister(led);
+ kfree(led);
+ }
+ }
+}
+
+static int wiimote_leds_create(struct wiimote_data *wdata)
+{
+ int i, ret;
+ struct device *dev = &wdata->hdev->dev;
+ size_t namesz = strlen(dev_name(dev)) + 9;
+ struct led_classdev *led;
+ char *name;
+
+ for (i = 0; i < 4; ++i) {
+ led = kzalloc(sizeof(struct led_classdev) + namesz, GFP_KERNEL);
+ if (!led) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ name = (void*)&led[1];
+ snprintf(name, namesz, "%s:blue:p%d", dev_name(dev), i);
+ led->name = name;
+ led->brightness = 0;
+ led->max_brightness = 1;
+ led->brightness_get = wiimote_leds_get;
+ led->brightness_set = wiimote_leds_set;
+
+ ret = led_classdev_register(dev, led);
+ if (ret) {
+ kfree(led);
+ goto err;
+ }
+ wdata->leds[i] = led;
+ }
+
+ return 0;
+
+err:
+ wiimote_leds_destroy(wdata);
+ return ret;
+}
+
static struct wiimote_data *wiimote_create(struct hid_device *hdev)
{
struct wiimote_data *wdata;
input_set_drvdata(wdata->input, wdata);
wdata->input->event = wiimote_input_event;
+ wdata->input->open = wiimote_input_open;
+ wdata->input->close = wiimote_input_close;
wdata->input->dev.parent = &wdata->hdev->dev;
wdata->input->id.bustype = wdata->hdev->bus;
wdata->input->id.vendor = wdata->hdev->vendor;
static void wiimote_destroy(struct wiimote_data *wdata)
{
+ wiimote_leds_destroy(wdata);
+
+ input_unregister_device(wdata->input);
+ cancel_work_sync(&wdata->worker);
+ hid_hw_stop(wdata->hdev);
+
kfree(wdata);
}
return -ENOMEM;
}
- ret = device_create_file(&hdev->dev, &dev_attr_led1);
- if (ret)
- goto err;
- ret = device_create_file(&hdev->dev, &dev_attr_led2);
- if (ret)
- goto err;
- ret = device_create_file(&hdev->dev, &dev_attr_led3);
- if (ret)
- goto err;
- ret = device_create_file(&hdev->dev, &dev_attr_led4);
- if (ret)
- goto err;
-
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "HID parse failed\n");
goto err_stop;
}
- /* smp_wmb: Write wdata->xy first before wdata->ready is set to 1 */
- smp_wmb();
- atomic_set(&wdata->ready, 1);
+ ret = wiimote_leds_create(wdata);
+ if (ret)
+ goto err_free;
+
hid_info(hdev, "New device registered\n");
/* by default set led1 after device initialization */
return 0;
+err_free:
+ wiimote_destroy(wdata);
+ return ret;
+
err_stop:
hid_hw_stop(hdev);
err:
input_free_device(wdata->input);
- device_remove_file(&hdev->dev, &dev_attr_led1);
- device_remove_file(&hdev->dev, &dev_attr_led2);
- device_remove_file(&hdev->dev, &dev_attr_led3);
- device_remove_file(&hdev->dev, &dev_attr_led4);
- wiimote_destroy(wdata);
+ kfree(wdata);
return ret;
}
struct wiimote_data *wdata = hid_get_drvdata(hdev);
hid_info(hdev, "Device removed\n");
-
- device_remove_file(&hdev->dev, &dev_attr_led1);
- device_remove_file(&hdev->dev, &dev_attr_led2);
- device_remove_file(&hdev->dev, &dev_attr_led3);
- device_remove_file(&hdev->dev, &dev_attr_led4);
-
- hid_hw_stop(hdev);
- input_unregister_device(wdata->input);
-
- cancel_work_sync(&wdata->worker);
wiimote_destroy(wdata);
}
{ USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL },
{ USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD, HID_QUIRK_NO_INIT_REPORTS },
{ 0, 0 }
};
#include <linux/cpu.h>
#include <linux/pci.h>
#include <linux/smp.h>
+#include <linux/moduleparam.h>
#include <asm/msr.h>
#include <asm/processor.h>
#define DRVNAME "coretemp"
+/*
+ * force_tjmax only matters when TjMax can't be read from the CPU itself.
+ * When set, it replaces the driver's suboptimal heuristic.
+ */
+static int force_tjmax;
+module_param_named(tjmax, force_tjmax, int, 0444);
+MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
+
#define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */
#define NUM_REAL_CORES 16 /* Number of Real cores per cpu */
#define CORETEMP_NAME_LENGTH 17 /* String Length of attrs */
#define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */
-#define MAX_THRESH_ATTRS 3 /* Maximum no of Threshold attrs */
-#define TOTAL_ATTRS (MAX_CORE_ATTRS + MAX_THRESH_ATTRS)
+#define TOTAL_ATTRS (MAX_CORE_ATTRS + 1)
#define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
#ifdef CONFIG_SMP
* This value is passed as "id" field to rdmsr/wrmsr functions.
* @status_reg: One of IA32_THERM_STATUS or IA32_PACKAGE_THERM_STATUS,
* from where the temperature values should be read.
- * @intrpt_reg: One of IA32_THERM_INTERRUPT or IA32_PACKAGE_THERM_INTERRUPT,
- * from where the thresholds are read.
* @attr_size: Total number of pre-core attrs displayed in the sysfs.
* @is_pkg_data: If this is 1, the temp_data holds pkgtemp data.
* Otherwise, temp_data holds coretemp data.
struct temp_data {
int temp;
int ttarget;
- int tmin;
int tjmax;
unsigned long last_updated;
unsigned int cpu;
u32 cpu_core_id;
u32 status_reg;
- u32 intrpt_reg;
int attr_size;
bool is_pkg_data;
bool valid;
return sprintf(buf, "%d\n", (eax >> 5) & 1);
}
-static ssize_t show_max_alarm(struct device *dev,
- struct device_attribute *devattr, char *buf)
-{
- u32 eax, edx;
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct platform_data *pdata = dev_get_drvdata(dev);
- struct temp_data *tdata = pdata->core_data[attr->index];
-
- rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx);
-
- return sprintf(buf, "%d\n", !!(eax & THERM_STATUS_THRESHOLD1));
-}
-
static ssize_t show_tjmax(struct device *dev,
struct device_attribute *devattr, char *buf)
{
return sprintf(buf, "%d\n", pdata->core_data[attr->index]->ttarget);
}
-static ssize_t store_ttarget(struct device *dev,
- struct device_attribute *devattr,
- const char *buf, size_t count)
-{
- struct platform_data *pdata = dev_get_drvdata(dev);
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct temp_data *tdata = pdata->core_data[attr->index];
- u32 eax, edx;
- unsigned long val;
- int diff;
-
- if (strict_strtoul(buf, 10, &val))
- return -EINVAL;
-
- /*
- * THERM_MASK_THRESHOLD1 is 7 bits wide. Values are entered in terms
- * of milli degree celsius. Hence don't accept val > (127 * 1000)
- */
- if (val > tdata->tjmax || val > 127000)
- return -EINVAL;
-
- diff = (tdata->tjmax - val) / 1000;
-
- mutex_lock(&tdata->update_lock);
- rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx);
- eax = (eax & ~THERM_MASK_THRESHOLD1) |
- (diff << THERM_SHIFT_THRESHOLD1);
- wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx);
- tdata->ttarget = val;
- mutex_unlock(&tdata->update_lock);
-
- return count;
-}
-
-static ssize_t show_tmin(struct device *dev,
- struct device_attribute *devattr, char *buf)
-{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct platform_data *pdata = dev_get_drvdata(dev);
-
- return sprintf(buf, "%d\n", pdata->core_data[attr->index]->tmin);
-}
-
-static ssize_t store_tmin(struct device *dev,
- struct device_attribute *devattr,
- const char *buf, size_t count)
-{
- struct platform_data *pdata = dev_get_drvdata(dev);
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct temp_data *tdata = pdata->core_data[attr->index];
- u32 eax, edx;
- unsigned long val;
- int diff;
-
- if (strict_strtoul(buf, 10, &val))
- return -EINVAL;
-
- /*
- * THERM_MASK_THRESHOLD0 is 7 bits wide. Values are entered in terms
- * of milli degree celsius. Hence don't accept val > (127 * 1000)
- */
- if (val > tdata->tjmax || val > 127000)
- return -EINVAL;
-
- diff = (tdata->tjmax - val) / 1000;
-
- mutex_lock(&tdata->update_lock);
- rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx);
- eax = (eax & ~THERM_MASK_THRESHOLD0) |
- (diff << THERM_SHIFT_THRESHOLD0);
- wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx);
- tdata->tmin = val;
- mutex_unlock(&tdata->update_lock);
-
- return count;
-}
-
static ssize_t show_temp(struct device *dev,
struct device_attribute *devattr, char *buf)
{
static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
{
- /* The 100C is default for both mobile and non mobile CPUs */
int err;
u32 eax, edx;
u32 val;
*/
err = rdmsr_safe_on_cpu(id, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
if (err) {
- dev_warn(dev, "Unable to read TjMax from CPU.\n");
+ if (c->x86_model > 0xe && c->x86_model != 0x1c)
+ dev_warn(dev, "Unable to read TjMax from CPU %u\n", id);
} else {
val = (eax >> 16) & 0xff;
/*
* will be used
*/
if (val) {
- dev_info(dev, "TjMax is %d C.\n", val);
+ dev_dbg(dev, "TjMax is %d degrees C\n", val);
return val * 1000;
}
}
+ if (force_tjmax) {
+ dev_notice(dev, "TjMax forced to %d degrees C by user\n",
+ force_tjmax);
+ return force_tjmax * 1000;
+ }
+
/*
* An assumption is made for early CPUs and unreadable MSR.
* NOTE: the calculated value may not be correct.
rdmsr(MSR_IA32_UCODE_REV, eax, *(u32 *)edx);
}
-static int get_pkg_tjmax(unsigned int cpu, struct device *dev)
-{
- int err;
- u32 eax, edx, val;
-
- err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
- if (!err) {
- val = (eax >> 16) & 0xff;
- if (val)
- return val * 1000;
- }
- dev_warn(dev, "Unable to read Pkg-TjMax from CPU:%u\n", cpu);
- return 100000; /* Default TjMax: 100 degree celsius */
-}
-
static int create_name_attr(struct platform_data *pdata, struct device *dev)
{
sysfs_attr_init(&pdata->name_attr.attr);
int attr_no)
{
int err, i;
- static ssize_t (*rd_ptr[TOTAL_ATTRS]) (struct device *dev,
+ static ssize_t (*const rd_ptr[TOTAL_ATTRS]) (struct device *dev,
struct device_attribute *devattr, char *buf) = {
show_label, show_crit_alarm, show_temp, show_tjmax,
- show_max_alarm, show_ttarget, show_tmin };
- static ssize_t (*rw_ptr[TOTAL_ATTRS]) (struct device *dev,
- struct device_attribute *devattr, const char *buf,
- size_t count) = { NULL, NULL, NULL, NULL, NULL,
- store_ttarget, store_tmin };
- static const char *names[TOTAL_ATTRS] = {
+ show_ttarget };
+ static const char *const names[TOTAL_ATTRS] = {
"temp%d_label", "temp%d_crit_alarm",
"temp%d_input", "temp%d_crit",
- "temp%d_max_alarm", "temp%d_max",
- "temp%d_max_hyst" };
+ "temp%d_max" };
for (i = 0; i < tdata->attr_size; i++) {
snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, names[i],
sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr);
tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i];
tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO;
- if (rw_ptr[i]) {
- tdata->sd_attrs[i].dev_attr.attr.mode |= S_IWUSR;
- tdata->sd_attrs[i].dev_attr.store = rw_ptr[i];
- }
tdata->sd_attrs[i].dev_attr.show = rd_ptr[i];
tdata->sd_attrs[i].index = attr_no;
err = device_create_file(dev, &tdata->sd_attrs[i].dev_attr);
}
-static int __devinit chk_ucode_version(struct platform_device *pdev)
+static int __cpuinit chk_ucode_version(unsigned int cpu)
{
- struct cpuinfo_x86 *c = &cpu_data(pdev->id);
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
int err;
u32 edx;
*/
if (c->x86_model == 0xe && c->x86_mask < 0xc) {
/* check for microcode update */
- err = smp_call_function_single(pdev->id, get_ucode_rev_on_cpu,
+ err = smp_call_function_single(cpu, get_ucode_rev_on_cpu,
&edx, 1);
if (err) {
- dev_err(&pdev->dev,
- "Cannot determine microcode revision of "
- "CPU#%u (%d)!\n", pdev->id, err);
+ pr_err("Cannot determine microcode revision of "
+ "CPU#%u (%d)!\n", cpu, err);
return -ENODEV;
} else if (edx < 0x39) {
- dev_err(&pdev->dev,
- "Errata AE18 not fixed, update BIOS or "
- "microcode of the CPU!\n");
+ pr_err("Errata AE18 not fixed, update BIOS or "
+ "microcode of the CPU!\n");
return -ENODEV;
}
}
tdata->status_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_STATUS :
MSR_IA32_THERM_STATUS;
- tdata->intrpt_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_INTERRUPT :
- MSR_IA32_THERM_INTERRUPT;
tdata->is_pkg_data = pkg_flag;
tdata->cpu = cpu;
tdata->cpu_core_id = TO_CORE_ID(cpu);
return tdata;
}
-static int create_core_data(struct platform_data *pdata,
- struct platform_device *pdev,
+static int create_core_data(struct platform_device *pdev,
unsigned int cpu, int pkg_flag)
{
struct temp_data *tdata;
+ struct platform_data *pdata = platform_get_drvdata(pdev);
struct cpuinfo_x86 *c = &cpu_data(cpu);
u32 eax, edx;
int err, attr_no;
goto exit_free;
/* We can access status register. Get Critical Temperature */
- if (pkg_flag)
- tdata->tjmax = get_pkg_tjmax(pdev->id, &pdev->dev);
- else
- tdata->tjmax = get_tjmax(c, cpu, &pdev->dev);
+ tdata->tjmax = get_tjmax(c, cpu, &pdev->dev);
/*
- * Test if we can access the intrpt register. If so, increase the
- * 'size' enough to have ttarget/tmin/max_alarm interfaces.
- * Initialize ttarget with bits 16:22 of MSR_IA32_THERM_INTERRUPT
+ * Read the still undocumented bits 8:15 of IA32_TEMPERATURE_TARGET.
+ * The target temperature is available on older CPUs but not in this
+ * register. Atoms don't have the register at all.
*/
- err = rdmsr_safe_on_cpu(cpu, tdata->intrpt_reg, &eax, &edx);
- if (!err) {
- tdata->attr_size += MAX_THRESH_ATTRS;
- tdata->ttarget = tdata->tjmax - ((eax >> 16) & 0x7f) * 1000;
+ if (c->x86_model > 0xe && c->x86_model != 0x1c) {
+ err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET,
+ &eax, &edx);
+ if (!err) {
+ tdata->ttarget
+ = tdata->tjmax - ((eax >> 8) & 0xff) * 1000;
+ tdata->attr_size++;
+ }
}
pdata->core_data[attr_no] = tdata;
return 0;
exit_free:
+ pdata->core_data[attr_no] = NULL;
kfree(tdata);
return err;
}
static void coretemp_add_core(unsigned int cpu, int pkg_flag)
{
- struct platform_data *pdata;
struct platform_device *pdev = coretemp_get_pdev(cpu);
int err;
if (!pdev)
return;
- pdata = platform_get_drvdata(pdev);
-
- err = create_core_data(pdata, pdev, cpu, pkg_flag);
+ err = create_core_data(pdev, cpu, pkg_flag);
if (err)
dev_err(&pdev->dev, "Adding Core %u failed\n", cpu);
}
struct platform_data *pdata;
int err;
- /* Check the microcode version of the CPU */
- err = chk_ucode_version(pdev);
- if (err)
- return err;
-
/* Initialize the per-package data structures */
pdata = kzalloc(sizeof(struct platform_data), GFP_KERNEL);
if (!pdata)
if (err)
goto exit_free;
- pdata->phys_proc_id = TO_PHYS_ID(pdev->id);
+ pdata->phys_proc_id = pdev->id;
platform_set_drvdata(pdev, pdata);
pdata->hwmon_dev = hwmon_device_register(&pdev->dev);
mutex_lock(&pdev_list_mutex);
- pdev = platform_device_alloc(DRVNAME, cpu);
+ pdev = platform_device_alloc(DRVNAME, TO_PHYS_ID(cpu));
if (!pdev) {
err = -ENOMEM;
pr_err("Device allocation failed\n");
}
pdev_entry->pdev = pdev;
- pdev_entry->phys_proc_id = TO_PHYS_ID(cpu);
+ pdev_entry->phys_proc_id = pdev->id;
list_add_tail(&pdev_entry->list, &pdev_list);
mutex_unlock(&pdev_list_mutex);
return;
if (!pdev) {
+ /* Check the microcode version of the CPU */
+ if (chk_ucode_version(cpu))
+ return;
+
/*
* Alright, we have DTS support.
* We are bringing the _first_ core in this pkg
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
- u16 temp[3]; /* Register values, word */
+ s16 temp[3]; /* Register values, word */
};
/*
void __iomem *amb_mmio;
struct i5k_device_attribute *attrs;
unsigned int num_attrs;
- unsigned long chipset_id;
};
static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
goto out;
}
- data->chipset_id = devid;
-
res = 0;
out:
pci_dev_put(pcidev);
return res;
}
-static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data,
- unsigned long channel)
-{
- switch (data->chipset_id) {
- case PCI_DEVICE_ID_INTEL_5000_ERR:
- return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel;
- case PCI_DEVICE_ID_INTEL_5400_ERR:
- return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel;
- default:
- BUG();
- }
-}
-
-static unsigned long chipset_ids[] = {
- PCI_DEVICE_ID_INTEL_5000_ERR,
- PCI_DEVICE_ID_INTEL_5400_ERR,
- 0
+static struct {
+ unsigned long err;
+ unsigned long fbd0;
+} chipset_ids[] __devinitdata = {
+ { PCI_DEVICE_ID_INTEL_5000_ERR, PCI_DEVICE_ID_INTEL_5000_FBD0 },
+ { PCI_DEVICE_ID_INTEL_5400_ERR, PCI_DEVICE_ID_INTEL_5400_FBD0 },
+ { 0, 0 }
};
#ifdef MODULE
{
struct i5k_amb_data *data;
struct resource *reso;
- int i;
- int res = -ENODEV;
+ int i, res;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
/* Figure out where the AMB registers live */
i = 0;
do {
- res = i5k_find_amb_registers(data, chipset_ids[i]);
+ res = i5k_find_amb_registers(data, chipset_ids[i].err);
+ if (res == 0)
+ break;
i++;
- } while (res && chipset_ids[i]);
+ } while (chipset_ids[i].err);
if (res)
goto err;
/* Copy the DIMM presence map for the first two channels */
- res = i5k_channel_probe(&data->amb_present[0],
- i5k_channel_pci_id(data, 0));
+ res = i5k_channel_probe(&data->amb_present[0], chipset_ids[i].fbd0);
if (res)
goto err;
/* Copy the DIMM presence map for the optional second two channels */
- i5k_channel_probe(&data->amb_present[2],
- i5k_channel_pci_id(data, 1));
+ i5k_channel_probe(&data->amb_present[2], chipset_ids[i].fbd0 + 1);
/* Set up resource regions */
reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME);
static inline int ADC_TO_CURR(int adc, int gain)
{
- return adc * 1400000 / gain * 255;
+ return adc * 1400000 / (gain * 255);
}
/*
if (data->comp[mid].ohm <= ohm) {
*i_low = mid;
*i_high = mid - 1;
- }
- if (data->comp[mid].ohm > ohm) {
+ } else {
*i_low = mid + 1;
*i_high = mid;
}
struct pmbus_limit_attr {
u16 reg; /* Limit register */
bool update; /* True if register needs updates */
+ bool low; /* True if low limit; for limits with compare
+ functions only */
const char *attr; /* Attribute name */
const char *alarm; /* Alarm attribute name */
u32 sbit; /* Alarm attribute status bit */
if (attr->compare) {
pmbus_add_boolean_cmp(data, name,
l->alarm, index,
- cbase, cindex,
+ l->low ? cindex : cbase,
+ l->low ? cbase : cindex,
attr->sbase + page, l->sbit);
} else {
pmbus_add_boolean_reg(data, name,
static const struct pmbus_limit_attr temp_limit_attrs[] = {
{
.reg = PMBUS_UT_WARN_LIMIT,
+ .low = true,
.attr = "min",
.alarm = "min_alarm",
.sbit = PB_TEMP_UT_WARNING,
}, {
.reg = PMBUS_UT_FAULT_LIMIT,
+ .low = true,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_TEMP_UT_FAULT,
static const struct pmbus_limit_attr temp_limit_attrs23[] = {
{
.reg = PMBUS_UT_WARN_LIMIT,
+ .low = true,
.attr = "min",
.alarm = "min_alarm",
.sbit = PB_TEMP_UT_WARNING,
}, {
.reg = PMBUS_UT_FAULT_LIMIT,
+ .low = true,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_TEMP_UT_FAULT,
block_buffer[ret] = '\0';
dev_info(&client->dev, "Device ID %s\n", block_buffer);
- mid = NULL;
- for (i = 0; i < ARRAY_SIZE(ucd9000_id); i++) {
- mid = &ucd9000_id[i];
+ for (mid = ucd9000_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
- if (!mid || !strlen(mid->name)) {
+ if (!mid->name[0]) {
dev_err(&client->dev, "Unsupported device\n");
return -ENODEV;
}
block_buffer[ret] = '\0';
dev_info(&client->dev, "Device ID %s\n", block_buffer);
- mid = NULL;
- for (i = 0; i < ARRAY_SIZE(ucd9200_id); i++) {
- mid = &ucd9200_id[i];
+ for (mid = ucd9200_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
- if (!mid || !strlen(mid->name)) {
+ if (!mid->name[0]) {
dev_err(&client->dev, "Unsupported device\n");
return -ENODEV;
}
struct i2c_board_info *info);
static int w83791d_remove(struct i2c_client *client);
-static int w83791d_read(struct i2c_client *client, u8 register);
-static int w83791d_write(struct i2c_client *client, u8 register, u8 value);
+static int w83791d_read(struct i2c_client *client, u8 reg);
+static int w83791d_write(struct i2c_client *client, u8 reg, u8 value);
static struct w83791d_data *w83791d_update_device(struct device *dev);
#ifdef DEBUG
#include <linux/slab.h>
#include <mach/hardware.h> /* Pick up IXP2000-specific bits */
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
static inline int ixp2000_scl_pin(void *data)
{
* @stop: stop condition
* @xfer_complete: acknowledge completion for a I2C message
* @result: controller propogated result
+ * @regulator: pointer to i2c regulator
* @busy: Busy doing transfer
*/
struct nmk_i2c_dev {
writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
dev->virtbase + I2C_IMSCR);
- timeout = wait_for_completion_interruptible_timeout(
+ timeout = wait_for_completion_timeout(
&dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
dev_err(&dev->pdev->dev,
- "wait_for_completion_interruptible_timeout"
+ "wait_for_completion_timeout"
"returned %d waiting for event\n", timeout);
status = timeout;
}
writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
dev->virtbase + I2C_IMSCR);
- timeout = wait_for_completion_interruptible_timeout(
+ timeout = wait_for_completion_timeout(
&dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
dev_err(&dev->pdev->dev,
- "wait_for_completion_interruptible_timeout"
+ "wait_for_completion_timeout "
"returned %d waiting for event\n", timeout);
status = timeout;
}
return 0;
}
-#ifdef CONFIG_SUSPEND
-static int omap_i2c_suspend(struct device *dev)
-{
- if (!pm_runtime_suspended(dev))
- if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend)
- dev->bus->pm->runtime_suspend(dev);
-
- return 0;
-}
-
-static int omap_i2c_resume(struct device *dev)
-{
- if (!pm_runtime_suspended(dev))
- if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume)
- dev->bus->pm->runtime_resume(dev);
-
- return 0;
-}
-
-static struct dev_pm_ops omap_i2c_pm_ops = {
- .suspend = omap_i2c_suspend,
- .resume = omap_i2c_resume,
-};
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif
-
static struct platform_driver omap_i2c_driver = {
.probe = omap_i2c_probe,
.remove = omap_i2c_remove,
.driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
- .pm = OMAP_I2C_PM_OPS,
},
};
return -EINVAL;
}
sds = kzalloc(sizeof(*sds), GFP_KERNEL);
- if (!sds)
+ if (!sds) {
+ ret = -ENOMEM;
goto err_mem;
+ }
for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) {
sds->pdev[i] = add_i2c_device(dev, i);
if (IS_ERR(sds->pdev[i])) {
+ ret = PTR_ERR(sds->pdev[i]);
while (--i >= 0)
platform_device_unregister(sds->pdev[i]);
goto err_dev_add;
/* Rounds down to not include partial word at the end of buf */
words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
- if (words_to_transfer > tx_fifo_avail)
- words_to_transfer = tx_fifo_avail;
- i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
-
- buf += words_to_transfer * BYTES_PER_FIFO_WORD;
- buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
- tx_fifo_avail -= words_to_transfer;
+ /* It's very common to have < 4 bytes, so optimize that case. */
+ if (words_to_transfer) {
+ if (words_to_transfer > tx_fifo_avail)
+ words_to_transfer = tx_fifo_avail;
+
+ /*
+ * Update state before writing to FIFO. If this casues us
+ * to finish writing all bytes (AKA buf_remaining goes to 0) we
+ * have a potential for an interrupt (PACKET_XFER_COMPLETE is
+ * not maskable). We need to make sure that the isr sees
+ * buf_remaining as 0 and doesn't call us back re-entrantly.
+ */
+ buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
+ tx_fifo_avail -= words_to_transfer;
+ i2c_dev->msg_buf_remaining = buf_remaining;
+ i2c_dev->msg_buf = buf +
+ words_to_transfer * BYTES_PER_FIFO_WORD;
+ barrier();
+
+ i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
+
+ buf += words_to_transfer * BYTES_PER_FIFO_WORD;
+ }
/*
* If there is a partial word at the end of buf, handle it manually to
if (tx_fifo_avail > 0 && buf_remaining > 0) {
BUG_ON(buf_remaining > 3);
memcpy(&val, buf, buf_remaining);
+
+ /* Again update before writing to FIFO to make sure isr sees. */
+ i2c_dev->msg_buf_remaining = 0;
+ i2c_dev->msg_buf = NULL;
+ barrier();
+
i2c_writel(i2c_dev, val, I2C_TX_FIFO);
- buf_remaining = 0;
- tx_fifo_avail--;
}
- BUG_ON(tx_fifo_avail > 0 && buf_remaining > 0);
- i2c_dev->msg_buf_remaining = buf_remaining;
- i2c_dev->msg_buf = buf;
return 0;
}
tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ);
}
- if ((status & I2C_INT_PACKET_XFER_COMPLETE) &&
- !i2c_dev->msg_buf_remaining)
+ if (status & I2C_INT_PACKET_XFER_COMPLETE) {
+ BUG_ON(i2c_dev->msg_buf_remaining);
complete(&i2c_dev->msg_complete);
+ }
i2c_writel(i2c_dev, status, I2C_INT_STATUS);
if (i2c_dev->is_dvc)
static u32 tegra_i2c_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C;
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static const struct i2c_algorithm tegra_i2c_algo = {
}
#endif
+#if defined(CONFIG_OF)
+/* Match table for of_platform binding */
+static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
+ { .compatible = "nvidia,tegra20-i2c", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
+#else
+#define tegra_i2c_of_match NULL
+#endif
+
static struct platform_driver tegra_i2c_driver = {
.probe = tegra_i2c_probe,
.remove = tegra_i2c_remove,
.driver = {
.name = "tegra-i2c",
.owner = THIS_MODULE,
+ .of_match_table = tegra_i2c_of_match,
},
};
#include <linux/platform_device.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/at91sam9_smc.h>
#define DRV_NAME "at91_ide"
if (!(rq->cmd_flags & REQ_FLUSH))
return BLKPREP_OK;
- cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
+ if (rq->special) {
+ cmd = rq->special;
+ memset(cmd, 0, sizeof(*cmd));
+ } else {
+ cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
+ }
/* FIXME: map struct ide_taskfile on rq->cmd[] */
BUG_ON(cmd == NULL);
if (test_bit(RELEASE_RESOURCES, &ep->com.flags)) {
cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid);
dst_release(ep->dst);
- l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+ l2t_release(ep->com.tdev, ep->l2t);
}
kfree(ep);
}
release_tid(ep->com.tdev, GET_TID(rpl), NULL);
cxgb3_free_atid(ep->com.tdev, ep->atid);
dst_release(ep->dst);
- l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+ l2t_release(ep->com.tdev, ep->l2t);
put_ep(&ep->com);
return CPL_RET_BUF_DONE;
}
if (!child_ep) {
printk(KERN_ERR MOD "%s - failed to allocate ep entry!\n",
__func__);
- l2t_release(L2DATA(tdev), l2t);
+ l2t_release(tdev, l2t);
dst_release(dst);
goto reject;
}
if (!err)
goto out;
- l2t_release(L2DATA(h->rdev.t3cdev_p), ep->l2t);
+ l2t_release(h->rdev.t3cdev_p, ep->l2t);
fail4:
dst_release(ep->dst);
fail3:
PDBG("%s ep %p redirect to dst %p l2t %p\n", __func__, ep, new,
l2t);
dst_hold(new);
- l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+ l2t_release(ep->com.tdev, ep->l2t);
ep->l2t = l2t;
dst_release(old);
ep->dst = new;
#include <linux/i8253.h>
#define GET_TIME(x) do { if (cpu_has_tsc) rdtscl(x); else x = get_time_pit(); } while (0)
-#define DELTA(x,y) (cpu_has_tsc ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? CLOCK_TICK_RATE / HZ : 0)))
+#define DELTA(x,y) (cpu_has_tsc ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? PIT_TICK_RATE / HZ : 0)))
#define TIME_NAME (cpu_has_tsc?"TSC":"PIT")
static unsigned int get_time_pit(void)
{
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("ADP5588/87 Keypad driver");
-MODULE_ALIAS("platform:adp5588-keys");
* flag.
*/
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/slab.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/keypad.h>
#include <plat/menelaus.h>
#include <asm/irq.h>
err_free_mem_region:
release_mem_region(res->start, resource_size(res));
err_free_mem:
- input_free_device(kbc->idev);
+ input_free_device(input_dev);
kfree(kbc);
return err;
/*
* AD714X CapTouch Programmable Controller driver (I2C bus)
*
- * Copyright 2009 Analog Devices Inc.
+ * Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume);
-static int ad714x_i2c_write(struct device *dev, unsigned short reg,
- unsigned short data)
+static int ad714x_i2c_write(struct ad714x_chip *chip,
+ unsigned short reg, unsigned short data)
{
- struct i2c_client *client = to_i2c_client(dev);
- int ret = 0;
- u8 *_reg = (u8 *)®
- u8 *_data = (u8 *)&data;
-
- u8 tx[4] = {
- _reg[1],
- _reg[0],
- _data[1],
- _data[0]
- };
-
- ret = i2c_master_send(client, tx, 4);
- if (ret < 0)
- dev_err(&client->dev, "I2C write error\n");
-
- return ret;
+ struct i2c_client *client = to_i2c_client(chip->dev);
+ int error;
+
+ chip->xfer_buf[0] = cpu_to_be16(reg);
+ chip->xfer_buf[1] = cpu_to_be16(data);
+
+ error = i2c_master_send(client, (u8 *)chip->xfer_buf,
+ 2 * sizeof(*chip->xfer_buf));
+ if (unlikely(error < 0)) {
+ dev_err(&client->dev, "I2C write error: %d\n", error);
+ return error;
+ }
+
+ return 0;
}
-static int ad714x_i2c_read(struct device *dev, unsigned short reg,
- unsigned short *data)
+static int ad714x_i2c_read(struct ad714x_chip *chip,
+ unsigned short reg, unsigned short *data, size_t len)
{
- struct i2c_client *client = to_i2c_client(dev);
- int ret = 0;
- u8 *_reg = (u8 *)®
- u8 *_data = (u8 *)data;
-
- u8 tx[2] = {
- _reg[1],
- _reg[0]
- };
- u8 rx[2];
-
- ret = i2c_master_send(client, tx, 2);
- if (ret >= 0)
- ret = i2c_master_recv(client, rx, 2);
-
- if (unlikely(ret < 0)) {
- dev_err(&client->dev, "I2C read error\n");
- } else {
- _data[0] = rx[1];
- _data[1] = rx[0];
+ struct i2c_client *client = to_i2c_client(chip->dev);
+ int i;
+ int error;
+
+ chip->xfer_buf[0] = cpu_to_be16(reg);
+
+ error = i2c_master_send(client, (u8 *)chip->xfer_buf,
+ sizeof(*chip->xfer_buf));
+ if (error >= 0)
+ error = i2c_master_recv(client, (u8 *)chip->xfer_buf,
+ len * sizeof(*chip->xfer_buf));
+
+ if (unlikely(error < 0)) {
+ dev_err(&client->dev, "I2C read error: %d\n", error);
+ return error;
}
- return ret;
+ for (i = 0; i < len; i++)
+ data[i] = be16_to_cpu(chip->xfer_buf[i]);
+
+ return 0;
}
static int __devinit ad714x_i2c_probe(struct i2c_client *client,
/*
* AD714X CapTouch Programmable Controller driver (SPI bus)
*
- * Copyright 2009 Analog Devices Inc.
+ * Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
-#include <linux/input.h> /* BUS_I2C */
+#include <linux/input.h> /* BUS_SPI */
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/pm.h>
static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume);
-static int ad714x_spi_read(struct device *dev, unsigned short reg,
- unsigned short *data)
+static int ad714x_spi_read(struct ad714x_chip *chip,
+ unsigned short reg, unsigned short *data, size_t len)
{
- struct spi_device *spi = to_spi_device(dev);
- unsigned short tx = AD714x_SPI_CMD_PREFIX | AD714x_SPI_READ | reg;
+ struct spi_device *spi = to_spi_device(chip->dev);
+ struct spi_message message;
+ struct spi_transfer xfer[2];
+ int i;
+ int error;
+
+ spi_message_init(&message);
+ memset(xfer, 0, sizeof(xfer));
+
+ chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX |
+ AD714x_SPI_READ | reg);
+ xfer[0].tx_buf = &chip->xfer_buf[0];
+ xfer[0].len = sizeof(chip->xfer_buf[0]);
+ spi_message_add_tail(&xfer[0], &message);
+
+ xfer[1].rx_buf = &chip->xfer_buf[1];
+ xfer[1].len = sizeof(chip->xfer_buf[1]) * len;
+ spi_message_add_tail(&xfer[1], &message);
+
+ error = spi_sync(spi, &message);
+ if (unlikely(error)) {
+ dev_err(chip->dev, "SPI read error: %d\n", error);
+ return error;
+ }
+
+ for (i = 0; i < len; i++)
+ data[i] = be16_to_cpu(chip->xfer_buf[i + 1]);
- return spi_write_then_read(spi, (u8 *)&tx, 2, (u8 *)data, 2);
+ return 0;
}
-static int ad714x_spi_write(struct device *dev, unsigned short reg,
- unsigned short data)
+static int ad714x_spi_write(struct ad714x_chip *chip,
+ unsigned short reg, unsigned short data)
{
- struct spi_device *spi = to_spi_device(dev);
- unsigned short tx[2] = {
- AD714x_SPI_CMD_PREFIX | reg,
- data
- };
+ struct spi_device *spi = to_spi_device(chip->dev);
+ int error;
+
+ chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX | reg);
+ chip->xfer_buf[1] = cpu_to_be16(data);
+
+ error = spi_write(spi, (u8 *)chip->xfer_buf,
+ 2 * sizeof(*chip->xfer_buf));
+ if (unlikely(error)) {
+ dev_err(chip->dev, "SPI write error: %d\n", error);
+ return error;
+ }
- return spi_write(spi, (u8 *)tx, 4);
+ return 0;
}
static int __devinit ad714x_spi_probe(struct spi_device *spi)
{
struct ad714x_chip *chip;
+ int err;
+
+ spi->bits_per_word = 8;
+ err = spi_setup(spi);
+ if (err < 0)
+ return err;
chip = ad714x_probe(&spi->dev, BUS_SPI, spi->irq,
ad714x_spi_read, ad714x_spi_write);
/*
* AD714X CapTouch Programmable Controller driver supporting AD7142/3/7/8/7A
*
- * Copyright 2009 Analog Devices Inc.
+ * Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#define STAGE11_AMBIENT 0x27D
#define PER_STAGE_REG_NUM 36
-#define STAGE_NUM 12
#define STAGE_CFGREG_NUM 8
#define SYS_CFGREG_NUM 8
* information to integrate all things which will be private data
* of spi/i2c device
*/
-struct ad714x_chip {
- unsigned short h_state;
- unsigned short l_state;
- unsigned short c_state;
- unsigned short adc_reg[STAGE_NUM];
- unsigned short amb_reg[STAGE_NUM];
- unsigned short sensor_val[STAGE_NUM];
-
- struct ad714x_platform_data *hw;
- struct ad714x_driver_data *sw;
-
- int irq;
- struct device *dev;
- ad714x_read_t read;
- ad714x_write_t write;
-
- struct mutex mutex;
-
- unsigned product;
- unsigned version;
-};
static void ad714x_use_com_int(struct ad714x_chip *ad714x,
int start_stage, int end_stage)
mask = ((1 << (end_stage + 1)) - 1) - ((1 << start_stage) - 1);
- ad714x->read(ad714x->dev, STG_COM_INT_EN_REG, &data);
+ ad714x->read(ad714x, STG_COM_INT_EN_REG, &data, 1);
data |= 1 << end_stage;
- ad714x->write(ad714x->dev, STG_COM_INT_EN_REG, data);
+ ad714x->write(ad714x, STG_COM_INT_EN_REG, data);
- ad714x->read(ad714x->dev, STG_HIGH_INT_EN_REG, &data);
+ ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data, 1);
data &= ~mask;
- ad714x->write(ad714x->dev, STG_HIGH_INT_EN_REG, data);
+ ad714x->write(ad714x, STG_HIGH_INT_EN_REG, data);
}
static void ad714x_use_thr_int(struct ad714x_chip *ad714x,
mask = ((1 << (end_stage + 1)) - 1) - ((1 << start_stage) - 1);
- ad714x->read(ad714x->dev, STG_COM_INT_EN_REG, &data);
+ ad714x->read(ad714x, STG_COM_INT_EN_REG, &data, 1);
data &= ~(1 << end_stage);
- ad714x->write(ad714x->dev, STG_COM_INT_EN_REG, data);
+ ad714x->write(ad714x, STG_COM_INT_EN_REG, data);
- ad714x->read(ad714x->dev, STG_HIGH_INT_EN_REG, &data);
+ ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data, 1);
data |= mask;
- ad714x->write(ad714x->dev, STG_HIGH_INT_EN_REG, data);
+ ad714x->write(ad714x, STG_HIGH_INT_EN_REG, data);
}
static int ad714x_cal_highest_stage(struct ad714x_chip *ad714x,
struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx];
int i;
+ ad714x->read(ad714x, CDC_RESULT_S0 + hw->start_stage,
+ &ad714x->adc_reg[hw->start_stage],
+ hw->end_stage - hw->start_stage + 1);
+
for (i = hw->start_stage; i <= hw->end_stage; i++) {
- ad714x->read(ad714x->dev, CDC_RESULT_S0 + i,
- &ad714x->adc_reg[i]);
- ad714x->read(ad714x->dev,
- STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
- &ad714x->amb_reg[i]);
-
- ad714x->sensor_val[i] = abs(ad714x->adc_reg[i] -
- ad714x->amb_reg[i]);
+ ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
+ &ad714x->amb_reg[i], 1);
+
+ ad714x->sensor_val[i] =
+ abs(ad714x->adc_reg[i] - ad714x->amb_reg[i]);
}
}
struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx];
int i;
+ ad714x->read(ad714x, CDC_RESULT_S0 + hw->start_stage,
+ &ad714x->adc_reg[hw->start_stage],
+ hw->end_stage - hw->start_stage + 1);
+
for (i = hw->start_stage; i <= hw->end_stage; i++) {
- ad714x->read(ad714x->dev, CDC_RESULT_S0 + i,
- &ad714x->adc_reg[i]);
- ad714x->read(ad714x->dev,
- STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
- &ad714x->amb_reg[i]);
+ ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
+ &ad714x->amb_reg[i], 1);
if (ad714x->adc_reg[i] > ad714x->amb_reg[i])
- ad714x->sensor_val[i] = ad714x->adc_reg[i] -
- ad714x->amb_reg[i];
+ ad714x->sensor_val[i] =
+ ad714x->adc_reg[i] - ad714x->amb_reg[i];
else
ad714x->sensor_val[i] = 0;
}
struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx];
int i;
+ ad714x->read(ad714x, CDC_RESULT_S0 + hw->x_start_stage,
+ &ad714x->adc_reg[hw->x_start_stage],
+ hw->x_end_stage - hw->x_start_stage + 1);
+
for (i = hw->x_start_stage; i <= hw->x_end_stage; i++) {
- ad714x->read(ad714x->dev, CDC_RESULT_S0 + i,
- &ad714x->adc_reg[i]);
- ad714x->read(ad714x->dev,
- STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
- &ad714x->amb_reg[i]);
+ ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
+ &ad714x->amb_reg[i], 1);
if (ad714x->adc_reg[i] > ad714x->amb_reg[i])
- ad714x->sensor_val[i] = ad714x->adc_reg[i] -
- ad714x->amb_reg[i];
+ ad714x->sensor_val[i] =
+ ad714x->adc_reg[i] - ad714x->amb_reg[i];
else
ad714x->sensor_val[i] = 0;
}
{
unsigned short data;
- ad714x->read(ad714x->dev, AD714X_PARTID_REG, &data);
+ ad714x->read(ad714x, AD714X_PARTID_REG, &data, 1);
switch (data & 0xFFF0) {
case AD7142_PARTID:
ad714x->product = 0x7142;
for (i = 0; i < STAGE_NUM; i++) {
reg_base = AD714X_STAGECFG_REG + i * STAGE_CFGREG_NUM;
for (j = 0; j < STAGE_CFGREG_NUM; j++)
- ad714x->write(ad714x->dev, reg_base + j,
+ ad714x->write(ad714x, reg_base + j,
ad714x->hw->stage_cfg_reg[i][j]);
}
for (i = 0; i < SYS_CFGREG_NUM; i++)
- ad714x->write(ad714x->dev, AD714X_SYSCFG_REG + i,
+ ad714x->write(ad714x, AD714X_SYSCFG_REG + i,
ad714x->hw->sys_cfg_reg[i]);
for (i = 0; i < SYS_CFGREG_NUM; i++)
- ad714x->read(ad714x->dev, AD714X_SYSCFG_REG + i,
- &data);
+ ad714x->read(ad714x, AD714X_SYSCFG_REG + i, &data, 1);
- ad714x->write(ad714x->dev, AD714X_STG_CAL_EN_REG, 0xFFF);
+ ad714x->write(ad714x, AD714X_STG_CAL_EN_REG, 0xFFF);
/* clear all interrupts */
- ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &data);
- ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &data);
- ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &data);
+ ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3);
}
static irqreturn_t ad714x_interrupt_thread(int irq, void *data)
mutex_lock(&ad714x->mutex);
- ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &ad714x->l_state);
- ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &ad714x->h_state);
- ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &ad714x->c_state);
+ ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3);
for (i = 0; i < ad714x->hw->button_num; i++)
ad714x_button_state_machine(ad714x, i);
mutex_lock(&ad714x->mutex);
data = ad714x->hw->sys_cfg_reg[AD714X_PWR_CTRL] | 0x3;
- ad714x->write(ad714x->dev, AD714X_PWR_CTRL, data);
+ ad714x->write(ad714x, AD714X_PWR_CTRL, data);
mutex_unlock(&ad714x->mutex);
int ad714x_enable(struct ad714x_chip *ad714x)
{
- unsigned short data;
-
dev_dbg(ad714x->dev, "%s enter\n", __func__);
mutex_lock(&ad714x->mutex);
/* resume to non-shutdown mode */
- ad714x->write(ad714x->dev, AD714X_PWR_CTRL,
+ ad714x->write(ad714x, AD714X_PWR_CTRL,
ad714x->hw->sys_cfg_reg[AD714X_PWR_CTRL]);
/* make sure the interrupt output line is not low level after resume,
* otherwise we will get no chance to enter falling-edge irq again
*/
- ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &data);
- ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &data);
- ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &data);
+ ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3);
mutex_unlock(&ad714x->mutex);
/*
* AD714X CapTouch Programmable Controller driver (bus interfaces)
*
- * Copyright 2009 Analog Devices Inc.
+ * Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/types.h>
+#define STAGE_NUM 12
+
struct device;
+struct ad714x_platform_data;
+struct ad714x_driver_data;
struct ad714x_chip;
-typedef int (*ad714x_read_t)(struct device *, unsigned short, unsigned short *);
-typedef int (*ad714x_write_t)(struct device *, unsigned short, unsigned short);
+typedef int (*ad714x_read_t)(struct ad714x_chip *, unsigned short, unsigned short *, size_t);
+typedef int (*ad714x_write_t)(struct ad714x_chip *, unsigned short, unsigned short);
+
+struct ad714x_chip {
+ unsigned short l_state;
+ unsigned short h_state;
+ unsigned short c_state;
+ unsigned short adc_reg[STAGE_NUM];
+ unsigned short amb_reg[STAGE_NUM];
+ unsigned short sensor_val[STAGE_NUM];
+
+ struct ad714x_platform_data *hw;
+ struct ad714x_driver_data *sw;
+
+ int irq;
+ struct device *dev;
+ ad714x_read_t read;
+ ad714x_write_t write;
+
+ struct mutex mutex;
+
+ unsigned product;
+ unsigned version;
+
+ __be16 xfer_buf[16] ____cacheline_aligned;
+
+};
int ad714x_disable(struct ad714x_chip *ad714x);
int ad714x_enable(struct ad714x_chip *ad714x);
le16_to_cpu(dev->ctl_req->wIndex),
dev->ctl_data,
USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
- if (error && error != EINTR)
+ if (error < 0 && error != -EINTR)
err("%s: usb_control_msg() failed %d", __func__, error);
}
{ .compatible = "fsl,mma8450", },
{ /* sentinel */ }
};
-MODULE_DEVICE_TABLE(i2c, mma8450_dt_ids);
+MODULE_DEVICE_TABLE(of, mma8450_dt_ids);
static struct i2c_driver mma8450_driver = {
.driver = {
err_pm_set_suspended:
pm_runtime_set_suspended(&client->dev);
err_free_mem:
- input_unregister_device(idev);
+ input_free_device(idev);
kfree(sensor);
return error;
}
#define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245
#define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246
#define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247
+/* MacbookAir4,1 (unibody, July 2011) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249
+#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a
+#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b
+/* MacbookAir4,2 (unibody, July 2011) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c
+#define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d
+#define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e
+/* Macbook8,2 (unibody) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
+#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
+#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS),
+ /* MacbookAir4,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS),
+ /* MacbookAir4,2 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_JIS),
+ /* MacbookPro8,2 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
/* Terminating entry */
{}
};
{ DIM_X, DIM_X / SN_COORD, -4415, 5050 },
{ DIM_Y, DIM_Y / SN_COORD, -55, 6680 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING6_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING6_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
+ },
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4750, 5280 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
+ },
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
+ },
{}
};
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
#define WAC_HID_FEATURE_REPORT 0x03
+#define WAC_MSG_RETRIES 5
static int usb_get_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
report,
hid_desc->wDescriptorLength,
5000); /* 5 secs */
- } while (result < 0 && limit++ < 5);
+ } while (result < 0 && limit++ < WAC_MSG_RETRIES);
/* No need to parse the Descriptor. It isn't an error though */
if (result < 0)
get_unaligned_le16(&report[i + 3]);
i += 4;
}
- } else if (usage == WCM_DIGITIZER) {
- /* max pressure isn't reported
- features->pressure_max = (unsigned short)
- (report[i+4] << 8 | report[i + 3]);
- */
- features->pressure_max = 255;
- i += 4;
}
break;
pen = 1;
i++;
break;
-
- case HID_USAGE_UNDEFINED:
- if (usage == WCM_DESKTOP && finger) /* capacity */
- features->pressure_max =
- get_unaligned_le16(&report[i + 3]);
- i += 4;
- break;
}
break;
int limit = 0, report_id = 2;
int error = -ENOMEM;
- rep_data = kmalloc(2, GFP_KERNEL);
+ rep_data = kmalloc(4, GFP_KERNEL);
if (!rep_data)
return error;
- /* ask to report tablet data if it is 2FGT Tablet PC or
+ /* ask to report tablet data if it is MT Tablet PC or
* not a Tablet PC */
if (features->type == TABLETPC2FG) {
do {
rep_data[0] = 3;
rep_data[1] = 4;
+ rep_data[2] = 0;
+ rep_data[3] = 0;
report_id = 3;
error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
- report_id, rep_data, 2);
+ report_id, rep_data, 4);
if (error >= 0)
error = usb_get_report(intf,
WAC_HID_FEATURE_REPORT, report_id,
- rep_data, 3);
- } while ((error < 0 || rep_data[1] != 4) && limit++ < 5);
+ rep_data, 4);
+ } while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES);
} else if (features->type != TABLETPC) {
do {
rep_data[0] = 2;
error = usb_get_report(intf,
WAC_HID_FEATURE_REPORT, report_id,
rep_data, 2);
- } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < WAC_MSG_RETRIES);
}
kfree(rep_data);
int i;
for (i = 0; i < 2; i++) {
- int p = data[9 * i + 2];
- bool touch = p && !wacom->shared->stylus_in_proximity;
+ int offset = (data[1] & 0x80) ? (8 * i) : (9 * i);
+ bool touch = data[offset + 3] & 0x80;
- input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
/*
* Touch events need to be disabled while stylus is
* in proximity because user's hand is resting on touchpad
* and sending unwanted events. User expects tablet buttons
* to continue working though.
*/
+ touch = touch && !wacom->shared->stylus_in_proximity;
+
+ input_mt_slot(input, i);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
- int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff;
- int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff;
+ int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff;
+ int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff;
if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
x <<= 5;
y <<= 5;
}
- input_report_abs(input, ABS_MT_PRESSURE, p);
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
features->x_fuzz, 0);
input_set_abs_params(input_dev, ABS_Y, 0, features->y_max,
features->y_fuzz, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
- features->pressure_fuzz, 0);
if (features->device_type == BTN_TOOL_PEN) {
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
+ features->pressure_fuzz, 0);
+
/* penabled devices have fixed resolution for each model */
input_abs_set_res(input_dev, ABS_X, features->x_resolution);
input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
+
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
case WACOM_21UX2:
}
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
wacom_setup_cintiq(wacom_wac);
break;
/* fall through */
case INTUOS:
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
wacom_setup_intuos(wacom_wac);
break;
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
wacom_setup_intuos(wacom_wac);
+
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
case TABLETPC2FG:
case TABLETPC:
__clear_bit(ABS_MISC, input_dev->absbit);
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
if (features->device_type != BTN_TOOL_PEN)
break; /* no need to process stylus stuff */
/* fall through */
case PL:
- case PTU:
case DTU:
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
+ __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
+
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+ break;
+
+ case PTU:
+ __set_bit(BTN_STYLUS2, input_dev->keybit);
/* fall through */
case PENPARTNER:
+ __set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+ __set_bit(BTN_STYLUS, input_dev->keybit);
+
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
case BAMBOO_PT:
__clear_bit(ABS_MISC, input_dev->absbit);
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
if (features->device_type == BTN_TOOL_DOUBLETAP) {
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
static const struct wacom_features wacom_features_0xD4 =
{ "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xD5 =
+ { "Wacom Bamboo Pen 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023,
+ 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD6 =
{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xD3) },
{ USB_DEVICE_WACOM(0xD4) },
+ { USB_DEVICE_WACOM(0xD5) },
{ USB_DEVICE_WACOM(0xD6) },
{ USB_DEVICE_WACOM(0xD7) },
{ USB_DEVICE_WACOM(0xD8) },
int x;
int y;
int area;
+ int pressure;
};
/* Each client has this additional data */
finger[id].x);
input_report_abs(input_dev, ABS_MT_POSITION_Y,
finger[id].y);
+ input_report_abs(input_dev, ABS_MT_PRESSURE,
+ finger[id].pressure);
} else {
finger[id].status = 0;
}
if (status != MXT_RELEASE) {
input_report_abs(input_dev, ABS_X, finger[single_id].x);
input_report_abs(input_dev, ABS_Y, finger[single_id].y);
+ input_report_abs(input_dev,
+ ABS_PRESSURE, finger[single_id].pressure);
}
input_sync(input_dev);
int x;
int y;
int area;
+ int pressure;
/* Check the touch is present on the screen */
if (!(status & MXT_DETECT)) {
y = y >> 2;
area = message->message[4];
+ pressure = message->message[5];
dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id,
status & MXT_MOVE ? "moved" : "pressed",
finger[id].x = x;
finger[id].y = y;
finger[id].area = area;
+ finger[id].pressure = pressure;
mxt_input_report(data, id);
}
0, data->max_x, 0, 0);
input_set_abs_params(input_dev, ABS_Y,
0, data->max_y, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE,
+ 0, 255, 0, 0);
/* For multi touch */
input_mt_init_slots(input_dev, MXT_MAX_FINGER);
0, data->max_x, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
0, data->max_y, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+ 0, 255, 0, 0);
input_set_drvdata(input_dev, data);
i2c_set_clientdata(client, data);
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*/
/*
* GNU General Public License for more details.
*/
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/errno.h>
dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name));
+ __set_bit(INPUT_PROP_DIRECT, dev->propbit);
+
/* penabled? */
error = w8001_command(w8001, W8001_CMD_QUERY, true);
if (!error) {
* Writes the command to the IOMMUs command buffer and informs the
* hardware about the new command.
*/
-static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
+static int iommu_queue_command_sync(struct amd_iommu *iommu,
+ struct iommu_cmd *cmd,
+ bool sync)
{
u32 left, tail, head, next_tail;
unsigned long flags;
copy_cmd_to_buffer(iommu, cmd, tail);
/* We need to sync now to make sure all commands are processed */
- iommu->need_sync = true;
+ iommu->need_sync = sync;
spin_unlock_irqrestore(&iommu->lock, flags);
return 0;
}
+static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
+{
+ return iommu_queue_command_sync(iommu, cmd, true);
+}
+
/*
* This function queues a completion wait command into the command
* buffer of an IOMMU
build_completion_wait(&cmd, (u64)&sem);
- ret = iommu_queue_command(iommu, &cmd);
+ ret = iommu_queue_command_sync(iommu, &cmd, false);
if (ret)
return ret;
static void domain_flush_devices(struct protection_domain *domain)
{
struct iommu_dev_data *dev_data;
- unsigned long flags;
-
- spin_lock_irqsave(&domain->lock, flags);
list_for_each_entry(dev_data, &domain->dev_list, list)
device_flush_dte(dev_data);
-
- spin_unlock_irqrestore(&domain->lock, flags);
}
/****************************************************************************
return ret;
}
- ret = request_irq(irq, dmar_fault, 0, iommu->name, iommu);
+ ret = request_irq(irq, dmar_fault, IRQF_NO_THREAD, iommu->name, iommu);
if (ret)
printk(KERN_ERR "IOMMU: can't request irq\n");
return ret;
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
static void bd2802_unregister_led_classdev(struct bd2802_led *led)
{
cancel_work_sync(&led->work);
+ led_classdev_unregister(&led->cdev_led2b);
+ led_classdev_unregister(&led->cdev_led2g);
+ led_classdev_unregister(&led->cdev_led2r);
+ led_classdev_unregister(&led->cdev_led1b);
+ led_classdev_unregister(&led->cdev_led1g);
led_classdev_unregister(&led->cdev_led1r);
}
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
if (count == size) {
led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off);
+ led_cdev->blink_delay_on = state;
ret = count;
}
if (count == size) {
led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state);
+ led_cdev->blink_delay_off = state;
ret = count;
}
struct linear_private_data
{
+ struct rcu_head rcu;
sector_t array_sectors;
dev_info_t disks[0];
- struct rcu_head rcu;
};
bio->bi_end_io = super_written;
atomic_inc(&mddev->pending_writes);
- submit_bio(REQ_WRITE | REQ_SYNC | REQ_FLUSH | REQ_FUA, bio);
+ submit_bio(WRITE_FLUSH_FUA, bio);
}
void md_super_wait(mddev_t *mddev)
ret = 0;
}
rdev->sectors = rdev->sb_start;
+ /* Limit to 4TB as metadata cannot record more than that */
+ if (rdev->sectors >= (2ULL << 32))
+ rdev->sectors = (2ULL << 32) - 2;
- if (rdev->sectors < sb->size * 2 && sb->level > 1)
+ if (rdev->sectors < ((sector_t)sb->size) * 2 && sb->level >= 1)
/* "this cannot possibly happen" ... */
ret = -EINVAL;
mddev->clevel[0] = 0;
mddev->layout = sb->layout;
mddev->raid_disks = sb->raid_disks;
- mddev->dev_sectors = sb->size * 2;
+ mddev->dev_sectors = ((sector_t)sb->size) * 2;
mddev->events = ev1;
mddev->bitmap_info.offset = 0;
mddev->bitmap_info.default_offset = MD_SB_BYTES >> 9;
rdev->sb_start = calc_dev_sboffset(rdev);
if (!num_sectors || num_sectors > rdev->sb_start)
num_sectors = rdev->sb_start;
+ /* Limit to 4TB as metadata cannot record more than that.
+ * 4TB == 2^32 KB, or 2*2^32 sectors.
+ */
+ if (num_sectors >= (2ULL << 32))
+ num_sectors = (2ULL << 32) - 2;
md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
rdev->sb_page);
md_super_wait(rdev->mddev);
sb->level = cpu_to_le32(mddev->level);
sb->layout = cpu_to_le32(mddev->layout);
+ if (test_bit(WriteMostly, &rdev->flags))
+ sb->devflags |= WriteMostly1;
+ else
+ sb->devflags &= ~WriteMostly1;
+
if (mddev->bitmap && mddev->bitmap_info.file == NULL) {
sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_info.offset);
sb->feature_map = cpu_to_le32(MD_FEATURE_BITMAP_OFFSET);
int err = -EINVAL;
if (cmd_match(buf, "faulty") && rdev->mddev->pers) {
md_error(rdev->mddev, rdev);
- err = 0;
+ if (test_bit(Faulty, &rdev->flags))
+ err = 0;
+ else
+ err = -EBUSY;
} else if (cmd_match(buf, "remove")) {
if (rdev->raid_disk >= 0)
err = -EBUSY;
err = 0;
} else if (cmd_match(buf, "-blocked")) {
if (!test_bit(Faulty, &rdev->flags) &&
- test_bit(BlockedBadBlocks, &rdev->flags)) {
+ rdev->badblocks.unacked_exist) {
/* metadata handler doesn't understand badblocks,
* so we need to fail the device
*/
return -ENODEV;
md_error(mddev, rdev);
+ if (!test_bit(Faulty, &rdev->flags))
+ return -EBUSY;
return 0;
}
bio_list_add(&conf->pending_bio_list, mbio);
spin_unlock_irqrestore(&conf->device_lock, flags);
}
- r1_bio_write_done(r1_bio);
-
- /* In case raid1d snuck in to freeze_array */
- wake_up(&conf->wait_barrier);
-
+ /* Mustn't call r1_bio_write_done before this next test,
+ * as it could result in the bio being freed.
+ */
if (sectors_handled < (bio->bi_size >> 9)) {
+ r1_bio_write_done(r1_bio);
/* We need another r1_bio. It has already been counted
* in bio->bi_phys_segments
*/
goto retry_write;
}
+ r1_bio_write_done(r1_bio);
+
+ /* In case raid1d snuck in to freeze_array */
+ wake_up(&conf->wait_barrier);
+
if (do_sync || !bitmap || !plugged)
md_wakeup_thread(mddev->thread);
md_write_end(r10_bio->mddev);
}
+static void one_write_done(r10bio_t *r10_bio)
+{
+ if (atomic_dec_and_test(&r10_bio->remaining)) {
+ if (test_bit(R10BIO_WriteError, &r10_bio->state))
+ reschedule_retry(r10_bio);
+ else {
+ close_write(r10_bio);
+ if (test_bit(R10BIO_MadeGood, &r10_bio->state))
+ reschedule_retry(r10_bio);
+ else
+ raid_end_bio_io(r10_bio);
+ }
+ }
+}
+
static void raid10_end_write_request(struct bio *bio, int error)
{
int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
* Let's see if all mirrored write operations have finished
* already.
*/
- if (atomic_dec_and_test(&r10_bio->remaining)) {
- if (test_bit(R10BIO_WriteError, &r10_bio->state))
- reschedule_retry(r10_bio);
- else {
- close_write(r10_bio);
- if (test_bit(R10BIO_MadeGood, &r10_bio->state))
- reschedule_retry(r10_bio);
- else
- raid_end_bio_io(r10_bio);
- }
- }
+ one_write_done(r10_bio);
if (dec_rdev)
rdev_dec_pending(conf->mirrors[dev].rdev, conf->mddev);
}
spin_unlock_irqrestore(&conf->device_lock, flags);
}
- if (atomic_dec_and_test(&r10_bio->remaining)) {
- /* This matches the end of raid10_end_write_request() */
- bitmap_endwrite(r10_bio->mddev->bitmap, r10_bio->sector,
- r10_bio->sectors,
- !test_bit(R10BIO_Degraded, &r10_bio->state),
- 0);
- md_write_end(mddev);
- raid_end_bio_io(r10_bio);
- }
-
- /* In case raid10d snuck in to freeze_array */
- wake_up(&conf->wait_barrier);
+ /* Don't remove the bias on 'remaining' (one_write_done) until
+ * after checking if we need to go around again.
+ */
if (sectors_handled < (bio->bi_size >> 9)) {
+ one_write_done(r10_bio);
/* We need another r10_bio. It has already been counted
* in bio->bi_phys_segments.
*/
r10_bio->state = 0;
goto retry_write;
}
+ one_write_done(r10_bio);
+
+ /* In case raid10d snuck in to freeze_array */
+ wake_up(&conf->wait_barrier);
if (do_sync || !mddev->bitmap || !plugged)
md_wakeup_thread(mddev->thread);
finish:
/* wait for this device to become unblocked */
- if (unlikely(s.blocked_rdev))
+ if (conf->mddev->external && unlikely(s.blocked_rdev))
md_wait_for_blocked_rdev(s.blocked_rdev, conf->mddev);
if (s.handle_bad_blocks)
static int vp7045_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- struct dvb_usb_device *d;
- int ret = dvb_usb_device_init(intf, &vp7045_properties,
- THIS_MODULE, &d, adapter_nr);
- if (ret)
- return ret;
-
- d->priv = kmalloc(20, GFP_KERNEL);
- if (!d->priv) {
- dvb_usb_device_exit(intf);
- return -ENOMEM;
- }
-
- return ret;
-}
-
-static void vp7045_usb_disconnect(struct usb_interface *intf)
-{
- struct dvb_usb_device *d = usb_get_intfdata(intf);
- kfree(d->priv);
- dvb_usb_device_exit(intf);
+ return dvb_usb_device_init(intf, &vp7045_properties,
+ THIS_MODULE, NULL, adapter_nr);
}
static struct usb_device_id vp7045_usb_table [] = {
static struct dvb_usb_device_properties vp7045_properties = {
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-vp7045-01.fw",
- .size_of_priv = sizeof(u8 *),
+ .size_of_priv = 20,
.num_adapters = 1,
.adapter = {
static struct usb_driver vp7045_usb_driver = {
.name = "dvb_usb_vp7045",
.probe = vp7045_usb_probe,
- .disconnect = vp7045_usb_disconnect,
+ .disconnect = dvb_usb_device_exit,
.id_table = vp7045_usb_table,
};
static void nvt_process_rx_ir_data(struct nvt_dev *nvt)
{
DEFINE_IR_RAW_EVENT(rawir);
- unsigned int count;
u32 carrier;
u8 sample;
int i;
if (nvt->carrier_detect_enabled)
carrier = nvt_rx_carrier_detect(nvt);
- count = nvt->pkts;
- nvt_dbg_verbose("Processing buffer of len %d", count);
+ nvt_dbg_verbose("Processing buffer of len %d", nvt->pkts);
init_ir_raw_event(&rawir);
- for (i = 0; i < count; i++) {
- nvt->pkts--;
+ for (i = 0; i < nvt->pkts; i++) {
sample = nvt->buf[i];
rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
rawir.duration = US_TO_NS((sample & BUF_LEN_MASK)
* SAMPLE_PERIOD);
- if ((sample & BUF_LEN_MASK) == BUF_LEN_MASK) {
- if (nvt->rawir.pulse == rawir.pulse)
- nvt->rawir.duration += rawir.duration;
- else {
- nvt->rawir.duration = rawir.duration;
- nvt->rawir.pulse = rawir.pulse;
- }
- continue;
- }
-
- rawir.duration += nvt->rawir.duration;
+ nvt_dbg("Storing %s with duration %d",
+ rawir.pulse ? "pulse" : "space", rawir.duration);
- init_ir_raw_event(&nvt->rawir);
- nvt->rawir.duration = 0;
- nvt->rawir.pulse = rawir.pulse;
-
- if (sample == BUF_PULSE_BIT)
- rawir.pulse = false;
-
- if (rawir.duration) {
- nvt_dbg("Storing %s with duration %d",
- rawir.pulse ? "pulse" : "space",
- rawir.duration);
-
- ir_raw_event_store_with_filter(nvt->rdev, &rawir);
- }
+ ir_raw_event_store_with_filter(nvt->rdev, &rawir);
/*
* BUF_PULSE_BIT indicates end of IR data, BUF_REPEAT_BYTE
* indicates end of IR signal, but new data incoming. In both
* cases, it means we're ready to call ir_raw_event_handle
*/
- if ((sample == BUF_PULSE_BIT) && nvt->pkts) {
+ if ((sample == BUF_PULSE_BIT) && (i + 1 < nvt->pkts)) {
nvt_dbg("Calling ir_raw_event_handle (signal end)\n");
ir_raw_event_handle(nvt->rdev);
}
}
+ nvt->pkts = 0;
+
nvt_dbg("Calling ir_raw_event_handle (buffer empty)\n");
ir_raw_event_handle(nvt->rdev);
- if (nvt->pkts) {
- nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts);
- nvt->pkts = 0;
- }
-
nvt_dbg_verbose("%s done", __func__);
}
spin_lock_init(&nvt->nvt_lock);
spin_lock_init(&nvt->tx.lock);
- init_ir_raw_event(&nvt->rawir);
ret = -EBUSY;
/* now claim resources */
struct nvt_dev {
struct pnp_dev *pdev;
struct rc_dev *rdev;
- struct ir_raw_event rawir;
spinlock_t nvt_lock;
case 0x60:
PDEBUG(D_PROBE, "Sensor is a OV7660");
sd->sensor = SEN_OV7660;
- sd->invert_led = 0;
break;
default:
PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
case BRIDGE_OV519:
cam->cam_mode = ov519_vga_mode;
cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
- sd->invert_led = !sd->invert_led;
break;
case BRIDGE_OVFX2:
cam->cam_mode = ov519_vga_mode;
/* -- module initialisation -- */
static const struct usb_device_id device_table[] = {
{USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF },
- {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x041e, 0x405f),
+ {USB_DEVICE(0x041e, 0x4052),
.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ {USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x041e, 0x4064),
- .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ {USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4067), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x041e, 0x4068),
+ {USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 },
+ {USB_DEVICE(0x045e, 0x028c),
.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
- {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x054c, 0x0155),
- .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ {USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 },
{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
- {USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 },
+ {USB_DEVICE(0x05a9, 0x0519),
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ {USB_DEVICE(0x05a9, 0x0530),
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
{USB_DEVICE(0x05a9, 0x2800), .driver_info = BRIDGE_OVFX2 },
{USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 },
reg_w1(gspca_dev, 0x01, 0x22);
msleep(100);
reg01 = SCL_SEL_OD | S_PDN_INV;
- reg17 &= MCK_SIZE_MASK;
+ reg17 &= ~MCK_SIZE_MASK;
reg17 |= 0x04; /* clock / 4 */
break;
}
if (!mode) { /* if 640x480 */
reg17 &= ~MCK_SIZE_MASK;
reg17 |= 0x04; /* clock / 4 */
+ } else {
+ reg01 &= ~SYS_SEL_48M; /* clk 24Mz */
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x02; /* clock / 2 */
}
break;
case SENSOR_OV7630:
"'%s' Display already enabled\n",
def_display->name);
}
- /* set the update mode */
- if (def_display->caps &
- OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
- if (dssdrv->enable_te)
- dssdrv->enable_te(def_display, 0);
- if (dssdrv->set_update_mode)
- dssdrv->set_update_mode(def_display,
- OMAP_DSS_UPDATE_MANUAL);
- } else {
- if (dssdrv->set_update_mode)
- dssdrv->set_update_mode(def_display,
- OMAP_DSS_UPDATE_AUTO);
- }
}
}
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <media/v4l2-event.h>
#include "isp.h"
if (pdev->restore_factory)
pdev->restore_factory->flags = V4L2_CTRL_FLAG_UPDATE;
- if (!pdev->features & FEATURE_MOTOR_PANTILT)
+ if (!(pdev->features & FEATURE_MOTOR_PANTILT))
return hdl->error;
/* Motor pan / tilt / reset */
list_for_each_entry(stream, &dev->streams, list) {
if (stream->intf == intf)
- return uvc_video_resume(stream);
+ return uvc_video_resume(stream, reset);
}
uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB interface "
if (remote == NULL)
return -EINVAL;
- source = (UVC_ENTITY_TYPE(remote) != UVC_TT_STREAMING)
+ source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING)
? (remote->vdev ? &remote->vdev->entity : NULL)
: &remote->subdev.entity;
if (source == NULL)
* buffers, making sure userspace applications are notified of the problem
* instead of waiting forever.
*/
-int uvc_video_resume(struct uvc_streaming *stream)
+int uvc_video_resume(struct uvc_streaming *stream, int reset)
{
int ret;
+ /* If the bus has been reset on resume, set the alternate setting to 0.
+ * This should be the default value, but some devices crash or otherwise
+ * misbehave if they don't receive a SET_INTERFACE request before any
+ * other video control request.
+ */
+ if (reset)
+ usb_set_interface(stream->dev->udev, stream->intfnum, 0);
+
stream->frozen = 0;
ret = uvc_commit_video(stream, &stream->ctrl);
/* Video */
extern int uvc_video_init(struct uvc_streaming *stream);
extern int uvc_video_suspend(struct uvc_streaming *stream);
-extern int uvc_video_resume(struct uvc_streaming *stream);
+extern int uvc_video_resume(struct uvc_streaming *stream, int reset);
extern int uvc_video_enable(struct uvc_streaming *stream, int enable);
extern int uvc_probe_video(struct uvc_streaming *stream,
struct uvc_streaming_control *probe);
media_device_unregister_entity(&vdev->entity);
#endif
+ /* Do not call v4l2_device_put if there is no release callback set.
+ * Drivers that have no v4l2_device release callback might free the
+ * v4l2_dev instance in the video_device release callback below, so we
+ * must perform this check here.
+ *
+ * TODO: In the long run all drivers that use v4l2_device should use the
+ * v4l2_device release callback. This check will then be unnecessary.
+ */
+ if (v4l2_dev->release == NULL)
+ v4l2_dev = NULL;
+
/* Release video_device and perform other
cleanups as needed. */
vdev->release(vdev);
mutex_init(&v4l2_dev->ioctl_lock);
v4l2_prio_init(&v4l2_dev->prio);
kref_init(&v4l2_dev->ref);
+ get_device(dev);
v4l2_dev->dev = dev;
if (dev == NULL) {
/* If dev == NULL, then name must be filled in by the caller */
if (dev_get_drvdata(v4l2_dev->dev) == v4l2_dev)
dev_set_drvdata(v4l2_dev->dev, NULL);
+ put_device(v4l2_dev->dev);
v4l2_dev->dev = NULL;
}
EXPORT_SYMBOL_GPL(v4l2_device_disconnect);
struct pci_bus *pbus = pci_find_bus(0, 0);
u8 cbyte;
+ if (!pbus)
+ return false;
pci_bus_read_config_byte(pbus, VIACAM_SERIAL_DEVFN,
VIACAM_SERIAL_CREG, &cbyte);
if ((cbyte & VIACAM_SERIAL_BIT) == 0)
ct->regs.ack = JZ_REG_ADC_STATUS;
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_ack = irq_gc_ack;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
irq_setup_generic_chip(gc, IRQ_MSK(5), 0, 0, IRQ_NOPROBE | IRQ_LEVEL);
max8997->dev = &i2c->dev;
max8997->i2c = i2c;
max8997->type = id->driver_data;
+ max8997->irq = i2c->irq;
if (!pdata)
goto err;
+ max8997->irq_base = pdata->irq_base;
+ max8997->ono = pdata->ono;
max8997->wakeup = pdata->wakeup;
mutex_init(&max8997->iolock);
pm_runtime_set_active(max8997->dev);
+ max8997_irq_init(max8997);
+
mfd_add_devices(max8997->dev, -1, max8997_devs,
ARRAY_SIZE(max8997_devs),
NULL, 0);
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/menelaus.h>
#define DRIVER_NAME "menelaus"
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/delay.h>
| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
- reg |= (1 << (i + 1));
} else
continue;
switch (tps65910_chip_id(tps65910)) {
case TPS65910:
tps65910->irq_num = TPS65910_NUM_IRQ;
+ break;
case TPS65911:
tps65910->irq_num = TPS65911_NUM_IRQ;
+ break;
}
/* Register with genirq */
u8 ch_msb, ch_lsb;
int ret;
- if (!req)
+ if (!req || !twl4030_madc)
return -EINVAL;
+
mutex_lock(&twl4030_madc->lock);
if (req->method < TWL4030_MADC_RT || req->method > TWL4030_MADC_SW2) {
ret = -EINVAL;
if (!madc)
return -ENOMEM;
+ madc->dev = &pdev->dev;
+
/*
* Phoenix provides 2 interrupt lines. The first one is connected to
* the OMAP. The other one can be connected to the other processor such
return ret;
}
-static int gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
+static int wm8350_gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
{
if (db == WM8350_GPIO_DEBOUNCE_ON)
return wm8350_set_bits(wm8350, WM8350_GPIO_DEBOUNCE,
goto err;
if (gpio_set_polarity(wm8350, gpio, pol))
goto err;
- if (gpio_set_debounce(wm8350, gpio, debounce))
+ if (wm8350_gpio_set_debounce(wm8350, gpio, debounce))
goto err;
if (gpio_set_dir(wm8350, gpio, dir))
goto err;
config ATMEL_PWM
tristate "Atmel AT32/AT91 PWM support"
- depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
+ depends on HAVE_CLK
help
This option enables device driver support for the PWM channels
on certain Atmel processors. Pulse Width Modulation is used for
config INTEL_MID_PTI
tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
+ depends on PCI
default n
help
The PTI (Parallel Trace Interface) driver directs
module_exit(ab8500_pwm_exit);
MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
-MODULE_ALIAS("AB8500 PWM driver");
+MODULE_ALIAS("platform:ab8500-pwm");
MODULE_LICENSE("GPL v2");
fail2:
if (client->irq)
- free_irq(client->irq, NULL);
+ free_irq(client->irq, usbsw);
fail1:
i2c_set_clientdata(client, NULL);
kfree(usbsw);
{
struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
if (client->irq)
- free_irq(client->irq, NULL);
+ free_irq(client->irq, usbsw);
i2c_set_clientdata(client, NULL);
sysfs_remove_group(&client->dev.kobj, &fsa9480_group);
* both have been read. So the value read will always be correct.
* Set BOOT bit to refresh factory tuning values.
*/
- lis3->read(lis3, CTRL_REG2, ®);
- if (lis3->whoami == WAI_12B)
- reg |= CTRL2_BDU | CTRL2_BOOT;
- else
- reg |= CTRL2_BOOT_8B;
- lis3->write(lis3, CTRL_REG2, reg);
+ if (lis3->pdata) {
+ lis3->read(lis3, CTRL_REG2, ®);
+ if (lis3->whoami == WAI_12B)
+ reg |= CTRL2_BDU | CTRL2_BOOT;
+ else
+ reg |= CTRL2_BOOT_8B;
+ lis3->write(lis3, CTRL_REG2, reg);
+ }
/* LIS3 power on delay is quite long */
msleep(lis3->pwron_delay / lis3lv02d_get_odr());
#include <linux/mutex.h>
#include <linux/miscdevice.h>
#include <linux/pti.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
#define DRIVERNAME "pti"
#define PCINAME "pciPTI"
static void pti_control_frame_built_and_sent(struct pti_masterchannel *mc,
const char *thread_name)
{
+ /*
+ * Since we access the comm member in current's task_struct, we only
+ * need to be as large as what 'comm' in that structure is.
+ */
+ char comm[TASK_COMM_LEN];
struct pti_masterchannel mccontrol = {.master = CONTROL_ID,
.channel = 0};
const char *thread_name_p;
u8 control_frame[CONTROL_FRAME_LEN];
if (!thread_name) {
- /*
- * Since we access the comm member in current's task_struct,
- * we only need to be as large as what 'comm' in that
- * structure is.
- */
- char comm[TASK_COMM_LEN];
-
if (!in_interrupt())
get_task_comm(comm, current);
else
/* Unknow packet? */
default:
type = *ptr;
+ if (st_gdata->list[type] == NULL) {
+ pr_err("chip/interface misbehavior dropping"
+ " frame starting with 0x%02x", type);
+ goto done;
+
+ }
st_gdata->rx_skb = alloc_skb(
st_gdata->list[type]->max_frame_size,
GFP_ATOMIC);
ptr++;
count--;
}
+done:
spin_unlock_irqrestore(&st_gdata->lock, flags);
pr_debug("done %s", __func__);
return;
*/
spin_lock_irqsave(&st_gdata->lock, flags);
for (i = ST_BT; i < ST_MAX_CHANNELS; i++) {
- if (st_gdata->list[i] != NULL)
+ if (st_gdata->is_registered[i] == true)
pr_err("%d not un-registered", i);
st_gdata->list[i] = NULL;
+ st_gdata->is_registered[i] = false;
}
st_gdata->protos_registered = 0;
spin_unlock_irqrestore(&st_gdata->lock, flags);
if (unlikely(skb->data[5] != 0)) {
pr_err("no proper response during fw download");
pr_err("data6 %x", skb->data[5]);
+ kfree_skb(skb);
return; /* keep waiting for the proper response */
}
/* becos of all the script being downloaded */
pr_err(" waiting for ver info- timed out ");
return -ETIMEDOUT;
}
+ INIT_COMPLETION(kim_gdata->kim_rcvd);
version =
MAKEWORD(kim_gdata->resp_buffer[13],
switch (((struct bts_action *)ptr)->type) {
case ACTION_SEND_COMMAND: /* action send */
+ pr_debug("S");
action_ptr = &(((struct bts_action *)ptr)->data[0]);
if (unlikely
(((struct hci_command *)action_ptr)->opcode ==
release_firmware(kim_gdata->fw_entry);
return -ETIMEDOUT;
}
+ /* reinit completion before sending for the
+ * relevant wait
+ */
+ INIT_COMPLETION(kim_gdata->kim_rcvd);
/*
* Free space found in uart buffer, call st_int_write
}
break;
case ACTION_WAIT_EVENT: /* wait */
+ pr_debug("W");
if (!wait_for_completion_timeout
(&kim_gdata->kim_rcvd,
msecs_to_jiffies(CMD_RESP_TIME))) {
{
long err = 0;
long retry = POR_RETRY_COUNT;
+ struct ti_st_plat_data *pdata;
struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
pr_info(" %s", __func__);
+ pdata = kim_gdata->kim_pdev->dev.platform_data;
do {
+ /* platform specific enabling code here */
+ if (pdata->chip_enable)
+ pdata->chip_enable(kim_gdata);
+
/* Configure BT nShutdown to HIGH state */
gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
mdelay(5); /* FIXME: a proper toggle */
pr_info("ldisc_install = 0");
sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
NULL, "install");
+ /* the following wait is never going to be completed,
+ * since the ldisc was never installed, hence serving
+ * as a mdelay of LDISC_TIME msecs */
+ err = wait_for_completion_timeout
+ (&kim_gdata->ldisc_installed,
+ msecs_to_jiffies(LDISC_TIME));
err = -ETIMEDOUT;
continue;
} else {
pr_info("ldisc_install = 0");
sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
NULL, "install");
+ /* this wait might be completed, though in the
+ * tty_close() since the ldisc is already
+ * installed */
+ err = wait_for_completion_timeout
+ (&kim_gdata->ldisc_installed,
+ msecs_to_jiffies(LDISC_TIME));
+ err = -EINVAL;
continue;
} else { /* on success don't retry */
break;
{
long err = 0;
struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
+ struct ti_st_plat_data *pdata =
+ kim_gdata->kim_pdev->dev.platform_data;
INIT_COMPLETION(kim_gdata->ldisc_installed);
gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
mdelay(1);
gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
+
+ /* platform specific disable */
+ if (pdata->chip_disable)
+ pdata->chip_disable(kim_gdata);
return err;
}
#define pr_fmt(fmt) "(stll) :" fmt
#include <linux/skbuff.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/ti_wilink_st.h>
/**********************************************************************/
static void ll_device_want_to_sleep(struct st_data_s *st_data)
{
+ struct kim_data_s *kim_data;
+ struct ti_st_plat_data *pdata;
+
pr_debug("%s", __func__);
/* sanity check */
if (st_data->ll_state != ST_LL_AWAKE)
send_ll_cmd(st_data, LL_SLEEP_ACK);
/* update state */
st_data->ll_state = ST_LL_ASLEEP;
+
+ /* communicate to platform about chip asleep */
+ kim_data = st_data->kim_data;
+ pdata = kim_data->kim_pdev->dev.platform_data;
+ if (pdata->chip_asleep)
+ pdata->chip_asleep(NULL);
}
static void ll_device_want_to_wakeup(struct st_data_s *st_data)
{
+ struct kim_data_s *kim_data;
+ struct ti_st_plat_data *pdata;
+
/* diff actions in diff states */
switch (st_data->ll_state) {
case ST_LL_ASLEEP:
}
/* update state */
st_data->ll_state = ST_LL_AWAKE;
+
+ /* communicate to platform about chip wakeup */
+ kim_data = st_data->kim_data;
+ pdata = kim_data->kim_pdev->dev.platform_data;
+ if (pdata->chip_asleep)
+ pdata->chip_awake(NULL);
}
/**********************************************************************/
/*
* Reliable writes are used to implement Forced Unit Access and
* REQ_META accesses, and are supported only on MMCs.
+ *
+ * XXX: this really needs a good explanation of why REQ_META
+ * is treated special.
*/
bool do_rel_wr = ((req->cmd_flags & REQ_FUA) ||
(req->cmd_flags & REQ_META)) &&
if (mrq->done)
mrq->done(mrq);
- mmc_host_clk_gate(host);
+ mmc_host_clk_release(host);
}
}
mrq->stop->mrq = mrq;
}
}
- mmc_host_clk_ungate(host);
+ mmc_host_clk_hold(host);
led_trigger_event(host->led, LED_FULL);
host->ops->request(host, mrq);
}
*/
void mmc_set_chip_select(struct mmc_host *host, int mode)
{
+ mmc_host_clk_hold(host);
host->ios.chip_select = mode;
mmc_set_ios(host);
+ mmc_host_clk_release(host);
}
/*
* Sets the host clock to the highest possible frequency that
* is below "hz".
*/
-void mmc_set_clock(struct mmc_host *host, unsigned int hz)
+static void __mmc_set_clock(struct mmc_host *host, unsigned int hz)
{
WARN_ON(hz < host->f_min);
mmc_set_ios(host);
}
+void mmc_set_clock(struct mmc_host *host, unsigned int hz)
+{
+ mmc_host_clk_hold(host);
+ __mmc_set_clock(host, hz);
+ mmc_host_clk_release(host);
+}
+
#ifdef CONFIG_MMC_CLKGATE
/*
* This gates the clock by setting it to 0 Hz.
if (host->clk_old) {
BUG_ON(host->ios.clock);
/* This call will also set host->clk_gated to false */
- mmc_set_clock(host, host->clk_old);
+ __mmc_set_clock(host, host->clk_old);
}
}
*/
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
{
+ mmc_host_clk_hold(host);
host->ios.bus_mode = mode;
mmc_set_ios(host);
+ mmc_host_clk_release(host);
}
/*
*/
void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
{
+ mmc_host_clk_hold(host);
host->ios.bus_width = width;
mmc_set_ios(host);
+ mmc_host_clk_release(host);
}
/**
ocr &= 3 << bit;
+ mmc_host_clk_hold(host);
host->ios.vdd = bit;
mmc_set_ios(host);
+ mmc_host_clk_release(host);
} else {
pr_warning("%s: host doesn't support card's voltages\n",
mmc_hostname(host));
*/
void mmc_set_timing(struct mmc_host *host, unsigned int timing)
{
+ mmc_host_clk_hold(host);
host->ios.timing = timing;
mmc_set_ios(host);
+ mmc_host_clk_release(host);
}
/*
*/
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
{
+ mmc_host_clk_hold(host);
host->ios.drv_type = drv_type;
mmc_set_ios(host);
+ mmc_host_clk_release(host);
}
/*
{
int bit;
+ mmc_host_clk_hold(host);
+
/* If ocr is set, we use it */
if (host->ocr)
bit = ffs(host->ocr) - 1;
* time required to reach a stable voltage.
*/
mmc_delay(10);
+
+ mmc_host_clk_release(host);
}
static void mmc_power_off(struct mmc_host *host)
{
+ mmc_host_clk_hold(host);
+
host->ios.clock = 0;
host->ios.vdd = 0;
host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
+
+ mmc_host_clk_release(host);
}
/*
}
/**
- * mmc_host_clk_ungate - ungate hardware MCI clocks
+ * mmc_host_clk_hold - ungate hardware MCI clocks
* @host: host to ungate.
*
* Makes sure the host ios.clock is restored to a non-zero value
* past this call. Increase clock reference count and ungate clock
* if we're the first user.
*/
-void mmc_host_clk_ungate(struct mmc_host *host)
+void mmc_host_clk_hold(struct mmc_host *host)
{
unsigned long flags;
}
/**
- * mmc_host_clk_gate - gate off hardware MCI clocks
+ * mmc_host_clk_release - gate off hardware MCI clocks
* @host: host to gate.
*
* Calls the host driver with ios.clock set to zero as often as possible
* in order to gate off hardware MCI clocks. Decrease clock reference
* count and schedule disabling of clock.
*/
-void mmc_host_clk_gate(struct mmc_host *host)
+void mmc_host_clk_release(struct mmc_host *host)
{
unsigned long flags;
host->clk_requests--;
if (mmc_host_may_gate_card(host->card) &&
!host->clk_requests)
- schedule_work(&host->clk_gate_work);
+ queue_work(system_nrt_wq, &host->clk_gate_work);
spin_unlock_irqrestore(&host->clk_lock, flags);
}
if (cancel_work_sync(&host->clk_gate_work))
mmc_host_clk_gate_delayed(host);
if (host->clk_gated)
- mmc_host_clk_ungate(host);
+ mmc_host_clk_hold(host);
/* There should be only one user now */
WARN_ON(host->clk_requests > 1);
}
void mmc_unregister_host_class(void);
#ifdef CONFIG_MMC_CLKGATE
-void mmc_host_clk_ungate(struct mmc_host *host);
-void mmc_host_clk_gate(struct mmc_host *host);
+void mmc_host_clk_hold(struct mmc_host *host);
+void mmc_host_clk_release(struct mmc_host *host);
unsigned int mmc_host_clk_rate(struct mmc_host *host);
#else
-static inline void mmc_host_clk_ungate(struct mmc_host *host)
+static inline void mmc_host_clk_hold(struct mmc_host *host)
{
}
-static inline void mmc_host_clk_gate(struct mmc_host *host)
+static inline void mmc_host_clk_release(struct mmc_host *host)
{
}
return 0;
}
-static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
+static void sd_update_bus_speed_mode(struct mmc_card *card)
{
- unsigned int bus_speed = 0, timing = 0;
- int err;
-
/*
* If the host doesn't support any of the UHS-I modes, fallback on
* default speed.
*/
if (!(card->host->caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
- MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50)))
- return 0;
+ MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))) {
+ card->sd_bus_speed = 0;
+ return;
+ }
if ((card->host->caps & MMC_CAP_UHS_SDR104) &&
(card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) {
- bus_speed = UHS_SDR104_BUS_SPEED;
- timing = MMC_TIMING_UHS_SDR104;
- card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
+ card->sd_bus_speed = UHS_SDR104_BUS_SPEED;
} else if ((card->host->caps & MMC_CAP_UHS_DDR50) &&
(card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) {
- bus_speed = UHS_DDR50_BUS_SPEED;
- timing = MMC_TIMING_UHS_DDR50;
- card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
+ card->sd_bus_speed = UHS_DDR50_BUS_SPEED;
} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode &
SD_MODE_UHS_SDR50)) {
- bus_speed = UHS_SDR50_BUS_SPEED;
- timing = MMC_TIMING_UHS_SDR50;
- card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
+ card->sd_bus_speed = UHS_SDR50_BUS_SPEED;
} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) &&
(card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) {
- bus_speed = UHS_SDR25_BUS_SPEED;
- timing = MMC_TIMING_UHS_SDR25;
- card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
+ card->sd_bus_speed = UHS_SDR25_BUS_SPEED;
} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 |
MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode &
SD_MODE_UHS_SDR12)) {
- bus_speed = UHS_SDR12_BUS_SPEED;
- timing = MMC_TIMING_UHS_SDR12;
- card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
+ card->sd_bus_speed = UHS_SDR12_BUS_SPEED;
+ }
+}
+
+static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
+{
+ int err;
+ unsigned int timing = 0;
+
+ switch (card->sd_bus_speed) {
+ case UHS_SDR104_BUS_SPEED:
+ timing = MMC_TIMING_UHS_SDR104;
+ card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
+ break;
+ case UHS_DDR50_BUS_SPEED:
+ timing = MMC_TIMING_UHS_DDR50;
+ card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
+ break;
+ case UHS_SDR50_BUS_SPEED:
+ timing = MMC_TIMING_UHS_SDR50;
+ card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
+ break;
+ case UHS_SDR25_BUS_SPEED:
+ timing = MMC_TIMING_UHS_SDR25;
+ card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
+ break;
+ case UHS_SDR12_BUS_SPEED:
+ timing = MMC_TIMING_UHS_SDR12;
+ card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
+ break;
+ default:
+ return 0;
}
- card->sd_bus_speed = bus_speed;
- err = mmc_sd_switch(card, 1, 0, bus_speed, status);
+ err = mmc_sd_switch(card, 1, 0, card->sd_bus_speed, status);
if (err)
return err;
- if ((status[16] & 0xF) != bus_speed)
+ if ((status[16] & 0xF) != card->sd_bus_speed)
printk(KERN_WARNING "%s: Problem setting bus speed mode!\n",
mmc_hostname(card->host));
else {
mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
}
+ /*
+ * Select the bus speed mode depending on host
+ * and card capability.
+ */
+ sd_update_bus_speed_mode(card);
+
/* Set the driver strength for the card */
err = sd_select_driver_type(card, status);
if (err)
goto out;
- /* Set bus speed mode of the card */
- err = sd_set_bus_speed_mode(card, status);
+ /* Set current limit for the card */
+ err = sd_set_current_limit(card, status);
if (err)
goto out;
- /* Set current limit for the card */
- err = sd_set_current_limit(card, status);
+ /* Set bus speed mode of the card */
+ err = sd_set_bus_speed_mode(card, status);
if (err)
goto out;
#include <plat/board.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/dma.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
ctrl &= ~SDHCI_CTRL_8BITBUS;
break;
default:
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
break;
}
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
+
+#include <mach/gpio-tegra.h>
#include <mach/sdhci.h>
#include "sdhci-pltfm.h"
mmc_data->hclk = clk_get_rate(priv->clk);
mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
mmc_data->get_cd = sh_mobile_sdhi_get_cd;
- if (mmc_data->flags & TMIO_MMC_HAS_IDLE_WAIT)
- mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
if (p) {
mmc_data->flags = p->tmio_flags;
+ if (mmc_data->flags & TMIO_MMC_HAS_IDLE_WAIT)
+ mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
mmc_data->ocr_mask = p->tmio_ocr_mask;
mmc_data->capabilities |= p->tmio_caps;
#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/sizes.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/board-ams-delta.h>
/*
#include <asm/mach/flash.h>
#include <plat/gpmc.h>
#include <plat/onenand.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/dma.h>
#define ubi_dbg_msg(fmt, ...) do { \
if (0) \
- pr_debug(fmt "\n", ##__VA_ARGS__); \
+ printk(KERN_DEBUG fmt "\n", ##__VA_ARGS__); \
} while (0)
#define dbg_msg(fmt, ...) ubi_dbg_msg(fmt, ##__VA_ARGS__)
source "drivers/net/stmmac/Kconfig"
config PCH_GBE
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
+ tristate "Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE"
depends on PCI
select MII
---help---
This driver enables Gigabit Ethernet function.
This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7223.
- ML7223 IOH is for MP(Media Phone) use.
- ML7223 is companion chip for Intel Atom E6xx series.
- ML7223 is completely compatible for Intel EG20T PCH.
+ Output Hub), ML7223/ML7831.
+ ML7223 IOH is for MP(Media Phone) use. ML7831 IOH is for general
+ purpose use.
+ ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config FTGMAC100
tristate "Faraday FTGMAC100 Gigabit Ethernet support"
struct net_device *dev = (struct net_device *)data;
struct dev_priv *priv = netdev_priv(dev);
unsigned int lnkstat, carrier;
+ unsigned long flags;
+ spin_lock_irqsave(&priv->chip_lock, flags);
lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST;
+ spin_unlock_irqrestore(&priv->chip_lock, flags);
carrier = netif_carrier_ok(dev);
if (lnkstat && !carrier) {
#include <asm/mach-types.h>
#include <mach/at91rm9200_emac.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/board.h>
#include "at91_ether.h"
u32 raw;
};
+/* dropless fc FW/HW related params */
+#define BRB_SIZE(bp) (CHIP_IS_E3(bp) ? 1024 : 512)
+#define MAX_AGG_QS(bp) (CHIP_IS_E1(bp) ? \
+ ETH_MAX_AGGREGATION_QUEUES_E1 :\
+ ETH_MAX_AGGREGATION_QUEUES_E1H_E2)
+#define FW_DROP_LEVEL(bp) (3 + MAX_SPQ_PENDING + MAX_AGG_QS(bp))
+#define FW_PREFETCH_CNT 16
+#define DROPLESS_FC_HEADROOM 100
/* MC hsi */
#define BCM_PAGE_SHIFT 12
/* SGE ring related macros */
#define NUM_RX_SGE_PAGES 2
#define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
-#define MAX_RX_SGE_CNT (RX_SGE_CNT - 2)
+#define NEXT_PAGE_SGE_DESC_CNT 2
+#define MAX_RX_SGE_CNT (RX_SGE_CNT - NEXT_PAGE_SGE_DESC_CNT)
/* RX_SGE_CNT is promised to be a power of 2 */
#define RX_SGE_MASK (RX_SGE_CNT - 1)
#define NUM_RX_SGE (RX_SGE_CNT * NUM_RX_SGE_PAGES)
#define MAX_RX_SGE (NUM_RX_SGE - 1)
#define NEXT_SGE_IDX(x) ((((x) & RX_SGE_MASK) == \
- (MAX_RX_SGE_CNT - 1)) ? (x) + 3 : (x) + 1)
+ (MAX_RX_SGE_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_SGE_DESC_CNT : \
+ (x) + 1)
#define RX_SGE(x) ((x) & MAX_RX_SGE)
+/*
+ * Number of required SGEs is the sum of two:
+ * 1. Number of possible opened aggregations (next packet for
+ * these aggregations will probably consume SGE immidiatelly)
+ * 2. Rest of BRB blocks divided by 2 (block will consume new SGE only
+ * after placement on BD for new TPA aggregation)
+ *
+ * Takes into account NEXT_PAGE_SGE_DESC_CNT "next" elements on each page
+ */
+#define NUM_SGE_REQ (MAX_AGG_QS(bp) + \
+ (BRB_SIZE(bp) - MAX_AGG_QS(bp)) / 2)
+#define NUM_SGE_PG_REQ ((NUM_SGE_REQ + MAX_RX_SGE_CNT - 1) / \
+ MAX_RX_SGE_CNT)
+#define SGE_TH_LO(bp) (NUM_SGE_REQ + \
+ NUM_SGE_PG_REQ * NEXT_PAGE_SGE_DESC_CNT)
+#define SGE_TH_HI(bp) (SGE_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
/* Manipulate a bit vector defined as an array of u64 */
/* Number of bits in one sge_mask array element */
#define NUM_TX_RINGS 16
#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types))
-#define MAX_TX_DESC_CNT (TX_DESC_CNT - 1)
+#define NEXT_PAGE_TX_DESC_CNT 1
+#define MAX_TX_DESC_CNT (TX_DESC_CNT - NEXT_PAGE_TX_DESC_CNT)
#define NUM_TX_BD (TX_DESC_CNT * NUM_TX_RINGS)
#define MAX_TX_BD (NUM_TX_BD - 1)
#define MAX_TX_AVAIL (MAX_TX_DESC_CNT * NUM_TX_RINGS - 2)
#define NEXT_TX_IDX(x) ((((x) & MAX_TX_DESC_CNT) == \
- (MAX_TX_DESC_CNT - 1)) ? (x) + 2 : (x) + 1)
+ (MAX_TX_DESC_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_TX_DESC_CNT : \
+ (x) + 1)
#define TX_BD(x) ((x) & MAX_TX_BD)
#define TX_BD_POFF(x) ((x) & MAX_TX_DESC_CNT)
/* The RX BD ring is special, each bd is 8 bytes but the last one is 16 */
#define NUM_RX_RINGS 8
#define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_bd))
-#define MAX_RX_DESC_CNT (RX_DESC_CNT - 2)
+#define NEXT_PAGE_RX_DESC_CNT 2
+#define MAX_RX_DESC_CNT (RX_DESC_CNT - NEXT_PAGE_RX_DESC_CNT)
#define RX_DESC_MASK (RX_DESC_CNT - 1)
#define NUM_RX_BD (RX_DESC_CNT * NUM_RX_RINGS)
#define MAX_RX_BD (NUM_RX_BD - 1)
#define MAX_RX_AVAIL (MAX_RX_DESC_CNT * NUM_RX_RINGS - 2)
-#define MIN_RX_AVAIL 128
+
+/* dropless fc calculations for BDs
+ *
+ * Number of BDs should as number of buffers in BRB:
+ * Low threshold takes into account NEXT_PAGE_RX_DESC_CNT
+ * "next" elements on each page
+ */
+#define NUM_BD_REQ BRB_SIZE(bp)
+#define NUM_BD_PG_REQ ((NUM_BD_REQ + MAX_RX_DESC_CNT - 1) / \
+ MAX_RX_DESC_CNT)
+#define BD_TH_LO(bp) (NUM_BD_REQ + \
+ NUM_BD_PG_REQ * NEXT_PAGE_RX_DESC_CNT + \
+ FW_DROP_LEVEL(bp))
+#define BD_TH_HI(bp) (BD_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
+#define MIN_RX_AVAIL ((bp)->dropless_fc ? BD_TH_HI(bp) + 128 : 128)
#define MIN_RX_SIZE_TPA_HW (CHIP_IS_E1(bp) ? \
ETH_MIN_RX_CQES_WITH_TPA_E1 : \
MIN_RX_AVAIL))
#define NEXT_RX_IDX(x) ((((x) & RX_DESC_MASK) == \
- (MAX_RX_DESC_CNT - 1)) ? (x) + 3 : (x) + 1)
+ (MAX_RX_DESC_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_RX_DESC_CNT : \
+ (x) + 1)
#define RX_BD(x) ((x) & MAX_RX_BD)
/*
#define CQE_BD_REL (sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd))
#define NUM_RCQ_RINGS (NUM_RX_RINGS * CQE_BD_REL)
#define RCQ_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_rx_cqe))
-#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - 1)
+#define NEXT_PAGE_RCQ_DESC_CNT 1
+#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - NEXT_PAGE_RCQ_DESC_CNT)
#define NUM_RCQ_BD (RCQ_DESC_CNT * NUM_RCQ_RINGS)
#define MAX_RCQ_BD (NUM_RCQ_BD - 1)
#define MAX_RCQ_AVAIL (MAX_RCQ_DESC_CNT * NUM_RCQ_RINGS - 2)
#define NEXT_RCQ_IDX(x) ((((x) & MAX_RCQ_DESC_CNT) == \
- (MAX_RCQ_DESC_CNT - 1)) ? (x) + 2 : (x) + 1)
+ (MAX_RCQ_DESC_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_RCQ_DESC_CNT : \
+ (x) + 1)
#define RCQ_BD(x) ((x) & MAX_RCQ_BD)
+/* dropless fc calculations for RCQs
+ *
+ * Number of RCQs should be as number of buffers in BRB:
+ * Low threshold takes into account NEXT_PAGE_RCQ_DESC_CNT
+ * "next" elements on each page
+ */
+#define NUM_RCQ_REQ BRB_SIZE(bp)
+#define NUM_RCQ_PG_REQ ((NUM_BD_REQ + MAX_RCQ_DESC_CNT - 1) / \
+ MAX_RCQ_DESC_CNT)
+#define RCQ_TH_LO(bp) (NUM_RCQ_REQ + \
+ NUM_RCQ_PG_REQ * NEXT_PAGE_RCQ_DESC_CNT + \
+ FW_DROP_LEVEL(bp))
+#define RCQ_TH_HI(bp) (RCQ_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
/* This is needed for determining of last_max */
#define SUB_S16(a, b) (s16)((s16)(a) - (s16)(b))
#define FP_CSB_FUNC_OFF \
offsetof(struct cstorm_status_block_c, func)
-#define HC_INDEX_TOE_RX_CQ_CONS 0 /* Formerly Ustorm TOE CQ index */
- /* (HC_INDEX_U_TOE_RX_CQ_CONS) */
-#define HC_INDEX_ETH_RX_CQ_CONS 1 /* Formerly Ustorm ETH CQ index */
- /* (HC_INDEX_U_ETH_RX_CQ_CONS) */
-#define HC_INDEX_ETH_RX_BD_CONS 2 /* Formerly Ustorm ETH BD index */
- /* (HC_INDEX_U_ETH_RX_BD_CONS) */
-
-#define HC_INDEX_TOE_TX_CQ_CONS 4 /* Formerly Cstorm TOE CQ index */
- /* (HC_INDEX_C_TOE_TX_CQ_CONS) */
-#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5 /* Formerly Cstorm ETH CQ index */
- /* (HC_INDEX_C_ETH_TX_CQ_CONS) */
-#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6 /* Formerly Cstorm ETH CQ index */
- /* (HC_INDEX_C_ETH_TX_CQ_CONS) */
-#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7 /* Formerly Cstorm ETH CQ index */
- /* (HC_INDEX_C_ETH_TX_CQ_CONS) */
+#define HC_INDEX_ETH_RX_CQ_CONS 1
-#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0
+#define HC_INDEX_OOO_TX_CQ_CONS 4
+#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5
+
+#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6
+
+#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7
+
+#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0
#define BNX2X_RX_SB_INDEX \
(&fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS])
#define BP_PORT(bp) (bp->pfid & 1)
#define BP_FUNC(bp) (bp->pfid)
#define BP_ABS_FUNC(bp) (bp->pf_num)
-#define BP_E1HVN(bp) (bp->pfid >> 1)
-#define BP_VN(bp) (BP_E1HVN(bp)) /*remove when approved*/
-#define BP_L_ID(bp) (BP_E1HVN(bp) << 2)
-#define BP_FW_MB_IDX(bp) (BP_PORT(bp) +\
- BP_VN(bp) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1))
+#define BP_VN(bp) ((bp)->pfid >> 1)
+#define BP_MAX_VN_NUM(bp) (CHIP_MODE_IS_4_PORT(bp) ? 2 : 4)
+#define BP_L_ID(bp) (BP_VN(bp) << 2)
+#define BP_FW_MB_IDX_VN(bp, vn) (BP_PORT(bp) +\
+ (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1))
+#define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp))
struct net_device *dev;
struct pci_dev *pdev;
#define MAX_DMAE_C_PER_PORT 8
#define INIT_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
- BP_E1HVN(bp))
+ BP_VN(bp))
#define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
E1HVN_MAX)
/* must be used on a CID before placing it on a HW ring */
#define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \
- (BP_E1HVN(bp) << BNX2X_SWCID_SHIFT) | \
+ (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \
(x))
#define SP_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_spe))
void bnx2x_init_rx_rings(struct bnx2x *bp)
{
int func = BP_FUNC(bp);
- int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
- ETH_MAX_AGGREGATION_QUEUES_E1H_E2;
u16 ring_prod;
int i, j;
if (!fp->disable_tpa) {
/* Fill the per-aggregtion pool */
- for (i = 0; i < max_agg_queues; i++) {
+ for (i = 0; i < MAX_AGG_QS(bp); i++) {
struct bnx2x_agg_info *tpa_info =
&fp->tpa_info[i];
struct sw_rx_bd *first_buf =
bnx2x_free_rx_sge_range(bp, fp,
ring_prod);
bnx2x_free_tpa_pool(bp, fp,
- max_agg_queues);
+ MAX_AGG_QS(bp));
fp->disable_tpa = 1;
ring_prod = 0;
break;
bnx2x_free_rx_bds(fp);
if (!fp->disable_tpa)
- bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
- ETH_MAX_AGGREGATION_QUEUES_E1 :
- ETH_MAX_AGGREGATION_QUEUES_E1H_E2);
+ bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp));
}
}
struct bnx2x_fastpath *fp = &bp->fp[index];
int ring_size = 0;
u8 cos;
+ int rx_ring_size = 0;
/* if rx_ring_size specified - use it */
- int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size :
- MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp);
+ if (!bp->rx_ring_size) {
- /* allocate at least number of buffers required by FW */
- rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
- MIN_RX_SIZE_TPA,
- rx_ring_size);
+ rx_ring_size = MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp);
+
+ /* allocate at least number of buffers required by FW */
+ rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
+ MIN_RX_SIZE_TPA, rx_ring_size);
+
+ bp->rx_ring_size = rx_ring_size;
+ } else
+ rx_ring_size = bp->rx_ring_size;
/* Common */
sb = &bnx2x_fp(bp, index, status_blk);
break;
case DCB_CAP_ATTR_DCBX:
*cap = BNX2X_DCBX_CAPS;
+ break;
default:
rval = -EINVAL;
break;
}
/* advertise the requested speed and duplex if supported */
- cmd->advertising &= bp->port.supported[cfg_idx];
+ if (cmd->advertising & ~(bp->port.supported[cfg_idx])) {
+ DP(NETIF_MSG_LINK, "Advertisement parameters "
+ "are not supported\n");
+ return -EINVAL;
+ }
bp->link_params.req_line_speed[cfg_idx] = SPEED_AUTO_NEG;
- bp->link_params.req_duplex[cfg_idx] = DUPLEX_FULL;
- bp->port.advertising[cfg_idx] |= (ADVERTISED_Autoneg |
+ bp->link_params.req_duplex[cfg_idx] = cmd->duplex;
+ bp->port.advertising[cfg_idx] = (ADVERTISED_Autoneg |
cmd->advertising);
+ if (cmd->advertising) {
+
+ bp->link_params.speed_cap_mask[cfg_idx] = 0;
+ if (cmd->advertising & ADVERTISED_10baseT_Half) {
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF;
+ }
+ if (cmd->advertising & ADVERTISED_10baseT_Full)
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL;
+ if (cmd->advertising & ADVERTISED_100baseT_Full)
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL;
+
+ if (cmd->advertising & ADVERTISED_100baseT_Half) {
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF;
+ }
+ if (cmd->advertising & ADVERTISED_1000baseT_Half) {
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G;
+ }
+ if (cmd->advertising & (ADVERTISED_1000baseT_Full |
+ ADVERTISED_1000baseKX_Full))
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G;
+
+ if (cmd->advertising & (ADVERTISED_10000baseT_Full |
+ ADVERTISED_10000baseKX4_Full |
+ ADVERTISED_10000baseKR_Full))
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G;
+ }
} else { /* forced speed */
/* advertise the requested speed and duplex if supported */
switch (speed) {
if (bp->rx_ring_size)
ering->rx_pending = bp->rx_ring_size;
else
- if (bp->state == BNX2X_STATE_OPEN && bp->num_queues)
- ering->rx_pending = MAX_RX_AVAIL/bp->num_queues;
- else
- ering->rx_pending = MAX_RX_AVAIL;
+ ering->rx_pending = MAX_RX_AVAIL;
ering->rx_mini_pending = 0;
ering->rx_jumbo_pending = 0;
{
u32 nig_reg_adress_crd_weight = 0;
u32 pbf_reg_adress_crd_weight = 0;
- /* Calculate and set BW for this COS*/
- const u32 cos_bw_nig = (bw * min_w_val_nig) / total_bw;
- const u32 cos_bw_pbf = (bw * min_w_val_pbf) / total_bw;
+ /* Calculate and set BW for this COS - use 1 instead of 0 for BW */
+ const u32 cos_bw_nig = ((bw ? bw : 1) * min_w_val_nig) / total_bw;
+ const u32 cos_bw_pbf = ((bw ? bw : 1) * min_w_val_pbf) / total_bw;
switch (cos_entry) {
case 0:
/* Calculate total BW requested */
for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) {
if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) {
-
- if (0 == ets_params->cos[cos_idx].params.bw_params.bw) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW"
- "was set to 0\n");
- return -EINVAL;
+ *total_bw +=
+ ets_params->cos[cos_idx].params.bw_params.bw;
}
- *total_bw +=
- ets_params->cos[cos_idx].params.bw_params.bw;
- }
}
- /*Check taotl BW is valid */
+ /* Check total BW is valid */
if ((100 != *total_bw) || (0 == *total_bw)) {
if (0 == *total_bw) {
DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW"
/* Check loopback mode */
if (lb)
- val |= XMAC_CTRL_REG_CORE_LOCAL_LPBK;
+ val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK;
REG_WR(bp, xmac_base + XMAC_REG_CTRL, val);
bnx2x_set_xumac_nig(params,
((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1);
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16);
+ /* Advertised and set FEC (Forward Error Correction) */
+ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+ MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2,
+ (MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY |
+ MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ));
+
/* Enable CL37 BAM */
if (REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region, dev_info.
(tmp | EMAC_LED_OVERRIDE));
/*
* return here without enabling traffic
- * LED blink andsetting rate in ON mode.
+ * LED blink and setting rate in ON mode.
* In oper mode, enabling LED blink
* and setting rate is needed.
*/
* This is a work-around for HW issue found when link
* is up in CL73
*/
- REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
+ if ((!CHIP_IS_E3(bp)) ||
+ (CHIP_IS_E3(bp) &&
+ mode == LED_MODE_ON))
+ REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
+
if (CHIP_IS_E1x(bp) ||
CHIP_IS_E2(bp) ||
(mode == LED_MODE_ON))
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
.addr = 0xff,
.def_md_devad = 0,
- .flags = (FLAGS_HW_LOCK_REQUIRED |
- FLAGS_TX_ERROR_CHECK),
+ .flags = FLAGS_HW_LOCK_REQUIRED,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
.addr = 0xff,
.def_md_devad = 0,
- .flags = (FLAGS_INIT_XGXS_FIRST |
- FLAGS_TX_ERROR_CHECK),
+ .flags = FLAGS_INIT_XGXS_FIRST,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
.addr = 0xff,
.def_md_devad = 0,
.flags = (FLAGS_HW_LOCK_REQUIRED |
- FLAGS_INIT_XGXS_FIRST |
- FLAGS_TX_ERROR_CHECK),
+ FLAGS_INIT_XGXS_FIRST),
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
.addr = 0xff,
.def_md_devad = 0,
- .flags = (FLAGS_FAN_FAILURE_DET_REQ |
- FLAGS_TX_ERROR_CHECK),
+ .flags = FLAGS_FAN_FAILURE_DET_REQ,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET);
opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
- opcode |= ((BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT) |
- (BP_E1HVN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
+ opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) |
+ (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
#ifdef __BIG_ENDIAN
if (!CHIP_IS_E1(bp)) {
/* init leading/trailing edge */
if (IS_MF(bp)) {
- val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
+ val = (0xee0f | (1 << (BP_VN(bp) + 4)));
if (bp->port.pmf)
/* enable nig and gpio3 attention */
val |= 0x1100;
/* init leading/trailing edge */
if (IS_MF(bp)) {
- val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
+ val = (0xee0f | (1 << (BP_VN(bp) + 4)));
if (bp->port.pmf)
/* enable nig and gpio3 attention */
val |= 0x1100;
int vn;
bp->vn_weight_sum = 0;
- for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
u32 vn_cfg = bp->mf_config[vn];
u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
}
+/* returns func by VN for current port */
+static inline int func_by_vn(struct bnx2x *bp, int vn)
+{
+ return 2 * vn + BP_PORT(bp);
+}
+
static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn)
{
struct rate_shaping_vars_per_vn m_rs_vn;
struct fairness_vars_per_vn m_fair_vn;
u32 vn_cfg = bp->mf_config[vn];
- int func = 2*vn + BP_PORT(bp);
+ int func = func_by_vn(bp, vn);
u16 vn_min_rate, vn_max_rate;
int i;
*
* and there are 2 functions per port
*/
- for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp);
if (func >= E1H_FUNC_MAX)
/* calculate and set min-max rate for each vn */
if (bp->port.pmf)
- for (vn = VN_0; vn < E1HVN_MAX; vn++)
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++)
bnx2x_init_vn_minmax(bp, vn);
/* always enable rate shaping and fairness */
static inline void bnx2x_link_sync_notify(struct bnx2x *bp)
{
- int port = BP_PORT(bp);
int func;
int vn;
/* Set the attention towards other drivers on the same port */
- for (vn = VN_0; vn < E1HVN_MAX; vn++) {
- if (vn == BP_E1HVN(bp))
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
+ if (vn == BP_VN(bp))
continue;
- func = ((vn << 1) | port);
+ func = func_by_vn(bp, vn);
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 +
(LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1);
}
bnx2x_dcbx_pmf_update(bp);
/* enable nig attention */
- val = (0xff0f | (1 << (BP_E1HVN(bp) + 4)));
+ val = (0xff0f | (1 << (BP_VN(bp) + 4)));
if (bp->common.int_block == INT_BLOCK_HC) {
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
u16 tpa_agg_size = 0;
if (!fp->disable_tpa) {
- pause->sge_th_hi = 250;
- pause->sge_th_lo = 150;
+ pause->sge_th_lo = SGE_TH_LO(bp);
+ pause->sge_th_hi = SGE_TH_HI(bp);
+
+ /* validate SGE ring has enough to cross high threshold */
+ WARN_ON(bp->dropless_fc &&
+ pause->sge_th_hi + FW_PREFETCH_CNT >
+ MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES);
+
tpa_agg_size = min_t(u32,
(min_t(u32, 8, MAX_SKB_FRAGS) *
SGE_PAGE_SIZE * PAGES_PER_SGE), 0xffff);
/* pause - not for e1 */
if (!CHIP_IS_E1(bp)) {
- pause->bd_th_hi = 350;
- pause->bd_th_lo = 250;
- pause->rcq_th_hi = 350;
- pause->rcq_th_lo = 250;
+ pause->bd_th_lo = BD_TH_LO(bp);
+ pause->bd_th_hi = BD_TH_HI(bp);
+
+ pause->rcq_th_lo = RCQ_TH_LO(bp);
+ pause->rcq_th_hi = RCQ_TH_HI(bp);
+ /*
+ * validate that rings have enough entries to cross
+ * high thresholds
+ */
+ WARN_ON(bp->dropless_fc &&
+ pause->bd_th_hi + FW_PREFETCH_CNT >
+ bp->rx_ring_size);
+ WARN_ON(bp->dropless_fc &&
+ pause->rcq_th_hi + FW_PREFETCH_CNT >
+ NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT);
pause->pri_map = 1;
}
* For PF Clients it should be the maximum avaliable number.
* VF driver(s) may want to define it to a smaller value.
*/
- rxq_init->max_tpa_queues =
- (CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
- ETH_MAX_AGGREGATION_QUEUES_E1H_E2);
+ rxq_init->max_tpa_queues = MAX_AGG_QS(bp);
rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
rxq_init->fw_sb_id = fp->fw_sb_id;
hc_sm->time_to_expire = 0xFFFFFFFF;
}
+
+/* allocates state machine ids. */
+static inline
+void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
+{
+ /* zero out state machine indices */
+ /* rx indices */
+ index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
+
+ /* tx indices */
+ index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
+
+ /* map indices */
+ /* rx indices */
+ index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
+ SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+
+ /* tx indices */
+ index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
+ SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
+ SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
+ SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
+ SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+}
+
static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
u8 vf_valid, int fw_sb_id, int igu_sb_id)
{
hc_sm_p = sb_data_e2.common.state_machine;
sb_data_p = (u32 *)&sb_data_e2;
data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
+ bnx2x_map_sb_state_machines(sb_data_e2.index_data);
} else {
memset(&sb_data_e1x, 0,
sizeof(struct hc_status_block_data_e1x));
hc_sm_p = sb_data_e1x.common.state_machine;
sb_data_p = (u32 *)&sb_data_e1x;
data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
+ bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
}
bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID],
int igu_seg_id;
int port = BP_PORT(bp);
int func = BP_FUNC(bp);
- int reg_offset;
+ int reg_offset, reg_offset_en5;
u64 section;
int index;
struct hc_sp_status_block_data sp_sb_data;
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+ reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
+ MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0);
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
int sindex;
/* take care of sig[0]..sig[4] */
* and not 16 between the different groups
*/
bp->attn_group[index].sig[4] = REG_RD(bp,
- reg_offset + 0x10 + 0x4*index);
+ reg_offset_en5 + 0x4*index);
else
bp->attn_group[index].sig[4] = 0;
}
* take the UNDI lock to protect undi_unload flow from accessing
* registers while we're resetting the chip
*/
- bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
bnx2x_reset_common(bp);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
}
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
- bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
if (CHIP_MODE_IS_4_PORT(bp))
dsb_idx = BP_FUNC(bp);
else
- dsb_idx = BP_E1HVN(bp);
+ dsb_idx = BP_VN(bp);
prod_offset = (CHIP_INT_MODE_IS_BC(bp) ?
IGU_BC_BASE_DSB_PROD + dsb_idx :
IGU_NORM_BASE_DSB_PROD + dsb_idx);
+ /*
+ * igu prods come in chunks of E1HVN_MAX (4) -
+ * does not matters what is the current chip mode
+ */
for (i = 0; i < (num_segs * E1HVN_MAX);
i += E1HVN_MAX) {
addr = IGU_REG_PROD_CONS_MEMORY +
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
u8 *mac_addr = bp->dev->dev_addr;
u32 val;
+ u16 pmc;
+
/* The mac address is written to entries 1-4 to
- preserve entry 0 which is used by the PMF */
- u8 entry = (BP_E1HVN(bp) + 1)*8;
+ * preserve entry 0 which is used by the PMF
+ */
+ u8 entry = (BP_VN(bp) + 1)*8;
val = (mac_addr[0] << 8) | mac_addr[1];
EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
(mac_addr[4] << 8) | mac_addr[5];
EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
+ /* Enable the PME and clear the status */
+ pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmc);
+ pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS;
+ pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, pmc);
+
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
} else
/* Check if there is any driver already loaded */
val = REG_RD(bp, MISC_REG_UNPREPARED);
if (val == 0x1) {
- /* Check if it is the UNDI driver
+
+ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
+ /*
+ * Check if it is the UNDI driver
* UNDI driver initializes CID offset for normal bell to 0x7
*/
- bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
if (val == 0x7) {
u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
bnx2x_fw_command(bp, reset_code, 0);
}
- /* now it's safe to release the lock */
- bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
-
bnx2x_undi_int_disable(bp);
port = BP_PORT(bp);
bp->fw_seq =
(SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
- } else
- bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+ }
+
+ /* now it's safe to release the lock */
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
}
}
static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp)
{
int pfid = BP_FUNC(bp);
- int vn = BP_E1HVN(bp);
int igu_sb_id;
u32 val;
u8 fid, igu_sb_cnt = 0;
bp->igu_base_sb = 0xff;
if (CHIP_INT_MODE_IS_BC(bp)) {
+ int vn = BP_VN(bp);
igu_sb_cnt = bp->igu_sb_cnt;
bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) *
FP_SB_MAX_E1x;
bp->igu_base_sb = 0;
} else {
bp->common.int_block = INT_BLOCK_IGU;
+
+ /* do not allow device reset during IGU info preocessing */
+ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
+
val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
bnx2x_get_igu_cam_info(bp);
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
}
/*
bp->mf_ov = 0;
bp->mf_mode = 0;
- vn = BP_E1HVN(bp);
+ vn = BP_VN(bp);
if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
/* port info */
bnx2x_get_port_hwinfo(bp);
- if (!BP_NOMCP(bp)) {
- bp->fw_seq =
- (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
- DRV_MSG_SEQ_NUMBER_MASK);
- BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
- }
-
/* Get MAC addresses */
bnx2x_get_mac_hwinfo(bp);
if (!BP_NOMCP(bp))
bnx2x_undi_unload(bp);
+ /* init fw_seq after undi_unload! */
+ if (!BP_NOMCP(bp)) {
+ bp->fw_seq =
+ (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
+ DRV_MSG_SEQ_NUMBER_MASK);
+ BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
+ }
+
if (CHIP_REV_IS_FPGA(bp))
dev_err(&bp->pdev->dev, "FPGA detected\n");
/* clean indirect addresses */
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
PCICFG_VENDOR_ID_OFFSET);
- /* Clean the following indirect addresses for all functions since it
+ /*
+ * Clean the following indirect addresses for all functions since it
* is not used by the driver.
*/
REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
+
+ if (CHIP_IS_E1x(bp)) {
+ REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
+ }
/*
* Enable internal target-read (in case we are probed after PF FLR).
Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
#define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
#define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
+/* [RW 32] fifth 32b for enabling the output for function 0 output0. Mapped
+ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved; */
+#define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0 0xa688
+/* [RW 32] Fifth 32b for enabling the output for function 1 output0. Mapped
+ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved; */
+#define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 0xa6b0
/* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
128 bit vector */
#define MISC_REG_AEU_GENERAL_ATTN_0 0xa000
#define XCM_REG_XX_OVFL_EVNT_ID 0x20058
#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS (0x1<<0)
#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS (0x1<<1)
-#define XMAC_CTRL_REG_CORE_LOCAL_LPBK (0x1<<3)
+#define XMAC_CTRL_REG_LINE_LOCAL_LPBK (0x1<<2)
#define XMAC_CTRL_REG_RX_EN (0x1<<1)
#define XMAC_CTRL_REG_SOFT_RESET (0x1<<6)
#define XMAC_CTRL_REG_TX_EN (0x1<<0)
#define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8
#define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9
#define HW_LOCK_RESOURCE_SPIO 2
-#define HW_LOCK_RESOURCE_UNDI 5
+#define HW_LOCK_RESOURCE_RESET 5
#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4)
#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5)
#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18)
#define MDIO_WC_REG_IEEE0BLK_AUTONEGNP 0x7
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0 0x10
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1 0x11
+#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12
+#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000
+#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000
#define MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150 0x96
#define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000
#define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1 0x800e
break;
case MAC_TYPE_NONE: /* unreached */
- BNX2X_ERR("stats updated by DMAE but no MAC active\n");
+ DP(BNX2X_MSG_STATS,
+ "stats updated by DMAE but no MAC active\n");
return -1;
default: /* unreached */
static void bnx2x_func_stats_base_init(struct bnx2x *bp)
{
- int vn, vn_max = IS_MF(bp) ? E1HVN_MAX : E1VN_MAX;
+ int vn, vn_max = IS_MF(bp) ? BP_MAX_VN_NUM(bp) : E1VN_MAX;
u32 func_stx;
/* sanity */
func_stx = bp->func_stx;
for (vn = VN_0; vn < vn_max; vn++) {
- int mb_idx = CHIP_IS_E1x(bp) ? 2*vn + BP_PORT(bp) : vn;
+ int mb_idx = BP_FW_MB_IDX_VN(bp, vn);
bp->func_stx = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_param);
bnx2x_func_stats_init(bp);
}
re_arm:
- queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
+ if (!bond->kill_timers)
+ queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
out:
read_unlock(&bond->lock);
}
}
re_arm:
- queue_delayed_work(bond->wq, &bond->alb_work, alb_delta_in_ticks);
+ if (!bond->kill_timers)
+ queue_delayed_work(bond->wq, &bond->alb_work, alb_delta_in_ticks);
out:
read_unlock(&bond->lock);
}
read_lock(&bond->lock);
+ if (bond->kill_timers)
+ goto out;
+
/* rejoin all groups on bond device */
__bond_resend_igmp_join_requests(bond->dev);
__bond_resend_igmp_join_requests(vlan_dev);
}
- if (--bond->igmp_retrans > 0)
+ if ((--bond->igmp_retrans > 0) && !bond->kill_timers)
queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5);
-
+out:
read_unlock(&bond->lock);
}
}
re_arm:
- if (bond->params.miimon)
+ if (bond->params.miimon && !bond->kill_timers)
queue_delayed_work(bond->wq, &bond->mii_work,
msecs_to_jiffies(bond->params.miimon));
out:
}
re_arm:
- if (bond->params.arp_interval)
+ if (bond->params.arp_interval && !bond->kill_timers)
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
out:
read_unlock(&bond->lock);
bond_ab_arp_probe(bond);
re_arm:
- if (bond->params.arp_interval)
+ if (bond->params.arp_interval && !bond->kill_timers)
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
out:
read_unlock(&bond->lock);
static int bond_open(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
+ struct slave *slave;
+ int i;
bond->kill_timers = 0;
+ /* reset slave->backup and slave->inactive */
+ read_lock(&bond->lock);
+ if (bond->slave_cnt > 0) {
+ read_lock(&bond->curr_slave_lock);
+ bond_for_each_slave(bond, slave, i) {
+ if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP)
+ && (slave != bond->curr_active_slave)) {
+ bond_set_slave_inactive_flags(slave);
+ } else {
+ bond_set_slave_active_flags(slave);
+ }
+ }
+ read_unlock(&bond->curr_slave_lock);
+ }
+ read_unlock(&bond->lock);
+
INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed);
if (bond_is_lb(bond)) {
struct sja1000_priv *priv;
int i = 0;
- for (i = 0; i < card->channels; i++) {
+ for (i = 0; i < PLX_PCI_MAX_CHAN; i++) {
dev = card->net_dev[i];
if (!dev)
continue;
if (err) {
dev_err(&pdev->dev, "Registering device failed "
"(err=%d)\n", err);
- free_sja1000dev(dev);
goto failure_cleanup;
}
dev_err(&pdev->dev, "Channel #%d not detected\n",
i + 1);
free_sja1000dev(dev);
+ card->net_dev[i] = NULL;
}
}
#include <linux/skbuff.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <linux/can/dev.h>
#include <linux/can/error.h>
spin_unlock_irqrestore(&priv->mbx_lock, flags);
/* Prepare mailbox for transmission */
+ data = cf->can_dlc | (get_tx_head_prio(priv) << 8);
if (cf->can_id & CAN_RTR_FLAG) /* Remote transmission request */
data |= HECC_CANMCF_RTR;
- data |= get_tx_head_prio(priv) << 8;
hecc_write_mbx(priv, mbxno, HECC_CANMCF, data);
if (cf->can_id & CAN_EFF_FLAG) /* Extended frame format */
priv->can.do_get_state = ti_hecc_get_state;
priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
+ spin_lock_init(&priv->mbx_lock);
ndev->irq = irq->start;
ndev->flags |= IFF_ECHO;
platform_set_drvdata(pdev, ndev);
struct net_device *dev = dev_id;
struct cas *cp = netdev_priv(dev);
unsigned long flags;
- int ring;
+ int ring = (irq == cp->pci_irq_INTC) ? 2 : 3;
u32 status = readl(cp->regs + REG_PLUS_INTRN_STATUS(ring));
/* check for shared irq */
if (status == 0)
return IRQ_NONE;
- ring = (irq == cp->pci_irq_INTC) ? 2 : 3;
spin_lock_irqsave(&cp->lock, flags);
if (status & INTR_RX_DONE_ALT) { /* handle rx separately */
#ifdef USE_NAPI
if (te && te->ctx && te->client && te->client->redirect) {
update_tcb = te->client->redirect(te->ctx, old, new, e);
if (update_tcb) {
+ rcu_read_lock();
l2t_hold(L2DATA(tdev), e);
+ rcu_read_unlock();
set_l2t_ix(tdev, tid, e);
}
}
}
- l2t_release(L2DATA(tdev), e);
+ l2t_release(tdev, e);
}
/*
goto out_free;
err = -ENOMEM;
- L2DATA(dev) = t3_init_l2t(l2t_capacity);
+ RCU_INIT_POINTER(dev->l2opt, t3_init_l2t(l2t_capacity));
if (!L2DATA(dev))
goto out_free;
out_free_l2t:
t3_free_l2t(L2DATA(dev));
- L2DATA(dev) = NULL;
+ rcu_assign_pointer(dev->l2opt, NULL);
out_free:
kfree(t);
return err;
}
+static void clean_l2_data(struct rcu_head *head)
+{
+ struct l2t_data *d = container_of(head, struct l2t_data, rcu_head);
+ t3_free_l2t(d);
+}
+
+
void cxgb3_offload_deactivate(struct adapter *adapter)
{
struct t3cdev *tdev = &adapter->tdev;
struct t3c_data *t = T3C_DATA(tdev);
+ struct l2t_data *d;
remove_adapter(adapter);
if (list_empty(&adapter_list))
free_tid_maps(&t->tid_maps);
T3C_DATA(tdev) = NULL;
- t3_free_l2t(L2DATA(tdev));
- L2DATA(tdev) = NULL;
+ rcu_read_lock();
+ d = L2DATA(tdev);
+ rcu_read_unlock();
+ rcu_assign_pointer(tdev->l2opt, NULL);
+ call_rcu(&d->rcu_head, clean_l2_data);
if (t->nofail_skb)
kfree_skb(t->nofail_skb);
kfree(t);
struct l2t_entry *t3_l2t_get(struct t3cdev *cdev, struct neighbour *neigh,
struct net_device *dev)
{
- struct l2t_entry *e;
- struct l2t_data *d = L2DATA(cdev);
+ struct l2t_entry *e = NULL;
+ struct l2t_data *d;
+ int hash;
u32 addr = *(u32 *) neigh->primary_key;
int ifidx = neigh->dev->ifindex;
- int hash = arp_hash(addr, ifidx, d);
struct port_info *p = netdev_priv(dev);
int smt_idx = p->port_id;
+ rcu_read_lock();
+ d = L2DATA(cdev);
+ if (!d)
+ goto done_rcu;
+
+ hash = arp_hash(addr, ifidx, d);
+
write_lock_bh(&d->lock);
for (e = d->l2tab[hash].first; e; e = e->next)
if (e->addr == addr && e->ifindex == ifidx &&
}
done:
write_unlock_bh(&d->lock);
+done_rcu:
+ rcu_read_unlock();
return e;
}
atomic_t nfree; /* number of free entries */
rwlock_t lock;
struct l2t_entry l2tab[0];
+ struct rcu_head rcu_head; /* to handle rcu cleanup */
};
typedef void (*arp_failure_handler_func)(struct t3cdev * dev,
/*
* Getting to the L2 data from an offload device.
*/
-#define L2DATA(dev) ((dev)->l2opt)
+#define L2DATA(cdev) (rcu_dereference((cdev)->l2opt))
#define W_TCB_L2T_IX 0
#define S_TCB_L2T_IX 7
return t3_l2t_send_slow(dev, skb, e);
}
-static inline void l2t_release(struct l2t_data *d, struct l2t_entry *e)
+static inline void l2t_release(struct t3cdev *t, struct l2t_entry *e)
{
- if (atomic_dec_and_test(&e->refcnt))
+ struct l2t_data *d;
+
+ rcu_read_lock();
+ d = L2DATA(t);
+
+ if (atomic_dec_and_test(&e->refcnt) && d)
t3_l2e_free(d, e);
+
+ rcu_read_unlock();
}
static inline void l2t_hold(struct l2t_data *d, struct l2t_entry *e)
{
- if (atomic_add_return(1, &e->refcnt) == 1) /* 0 -> 1 transition */
+ if (d && atomic_add_return(1, &e->refcnt) == 1) /* 0 -> 1 transition */
atomic_dec(&d->nfree);
}
setup_debugfs(adapter);
}
+ /* PCIe EEH recovery on powerpc platforms needs fundamental reset */
+ pdev->needs_freset = 1;
+
if (is_offload(adapter))
attach_ulds(adapter);
checksum += eeprom_data;
}
+#ifdef CONFIG_PARISC
+ /* This is a signature and not a checksum on HP c8000 */
+ if ((hw->subsystem_vendor_id == 0x103C) && (eeprom_data == 0x16d6))
+ return E1000_SUCCESS;
+
+#endif
if (checksum == (u16) EEPROM_SUM)
return E1000_SUCCESS;
else {
#define HV_M_STATUS_SPEED_1000 0x0200
#define HV_M_STATUS_LINK_UP 0x0040
+#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */
+#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000
+
/* Time to wait before putting the device into D3 if there's no link (in ms). */
#define LINK_TIMEOUT 100
#define FLAG2_DISABLE_AIM (1 << 8)
#define FLAG2_CHECK_PHY_HANG (1 << 9)
#define FLAG2_NO_DISABLE_RX (1 << 10)
+#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
#define HV_PM_CTRL PHY_REG(770, 17)
/* PHY Low Power Idle Control */
-#define I82579_LPI_CTRL PHY_REG(772, 20)
-#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
+#define I82579_LPI_CTRL PHY_REG(772, 20)
+#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
/* EMI Registers */
#define I82579_EMI_ADDR 0x10
#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
#define HV_KMRN_MDIO_SLOW 0x0400
+/* KMRN FIFO Control and Status */
+#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16)
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12
+
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
bool link;
+ u16 phy_reg;
/*
* We only want to go out to the PHY registers to see if Auto-Neg
mac->get_link_status = false;
- if (hw->phy.type == e1000_phy_82578) {
- ret_val = e1000_link_stall_workaround_hv(hw);
- if (ret_val)
- goto out;
- }
-
- if (hw->mac.type == e1000_pch2lan) {
+ switch (hw->mac.type) {
+ case e1000_pch2lan:
ret_val = e1000_k1_workaround_lv(hw);
if (ret_val)
goto out;
+ /* fall-thru */
+ case e1000_pchlan:
+ if (hw->phy.type == e1000_phy_82578) {
+ ret_val = e1000_link_stall_workaround_hv(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * Workaround for PCHx parts in half-duplex:
+ * Set the number of preambles removed from the packet
+ * when it is passed from the PHY to the MAC to prevent
+ * the MAC from misinterpreting the packet type.
+ */
+ e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg);
+ phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK;
+
+ if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD)
+ phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT);
+
+ e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg);
+ break;
+ default:
+ break;
}
/*
(adapter->hw.phy.type == e1000_phy_igp_3))
adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
+ /* Enable workaround for 82579 w/ ME enabled */
+ if ((adapter->hw.mac.type == e1000_pch2lan) &&
+ (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
+
/* Disable EEE by default until IEEE802.3az spec is finalized */
if (adapter->flags2 & FLAG2_HAS_EEE)
adapter->hw.dev_spec.ich8lan.eee_disable = true;
return ret_val;
/* Preamble tuning for SSC */
- ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204);
+ ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204);
if (ret_val)
return ret_val;
}
s32 ret_val = 0;
u16 status_reg = 0;
u32 mac_reg;
+ u16 phy_reg;
if (hw->mac.type != e1000_pch2lan)
goto out;
mac_reg = er32(FEXTNVM4);
mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
- if (status_reg & HV_M_STATUS_SPEED_1000)
+ ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
+ if (ret_val)
+ goto out;
+
+ if (status_reg & HV_M_STATUS_SPEED_1000) {
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
- else
+ phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
+ } else {
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
-
+ phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
+ }
ew32(FEXTNVM4, mac_reg);
+ ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
}
out:
adapter->hw_csum_good++;
}
+/**
+ * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa()
+ * @hw: pointer to the HW structure
+ * @tail: address of tail descriptor register
+ * @i: value to write to tail descriptor register
+ *
+ * When updating the tail register, the ME could be accessing Host CSR
+ * registers at the same time. Normally, this is handled in h/w by an
+ * arbiter but on some parts there is a bug that acknowledges Host accesses
+ * later than it should which could result in the descriptor register to
+ * have an incorrect value. Workaround this by checking the FWSM register
+ * which has bit 24 set while ME is accessing Host CSR registers, wait
+ * if it is set and try again a number of times.
+ **/
+static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail,
+ unsigned int i)
+{
+ unsigned int j = 0;
+
+ while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) &&
+ (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI))
+ udelay(50);
+
+ writel(i, tail);
+
+ if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail)))
+ return E1000_ERR_SWFW_SYNC;
+
+ return 0;
+}
+
+static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i)
+{
+ u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (e1000e_update_tail_wa(hw, tail, i)) {
+ u32 rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ e_err("ME firmware caused invalid RDT - resetting\n");
+ schedule_work(&adapter->reset_task);
+ }
+}
+
+static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i)
+{
+ u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (e1000e_update_tail_wa(hw, tail, i)) {
+ u32 tctl = er32(TCTL);
+ ew32(TCTL, tctl & ~E1000_TCTL_EN);
+ e_err("ME firmware caused invalid TDT - resetting\n");
+ schedule_work(&adapter->reset_task);
+ }
+}
+
/**
* e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
* @adapter: address of board private structure
* such as IA-64).
*/
wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_rdt_wa(adapter, i);
+ else
+ writel(i, adapter->hw.hw_addr + rx_ring->tail);
}
i++;
if (i == rx_ring->count)
* such as IA-64).
*/
wmb();
- writel(i << 1, adapter->hw.hw_addr + rx_ring->tail);
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_rdt_wa(adapter, i << 1);
+ else
+ writel(i << 1,
+ adapter->hw.hw_addr + rx_ring->tail);
}
i++;
* applicable for weak-ordered memory model archs,
* such as IA-64). */
wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_rdt_wa(adapter, i);
+ else
+ writel(i, adapter->hw.hw_addr + rx_ring->tail);
}
}
wmb();
tx_ring->next_to_use = i;
- writel(i, adapter->hw.hw_addr + tx_ring->tail);
+
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_tdt_wa(adapter, i);
+ else
+ writel(i, adapter->hw.hw_addr + tx_ring->tail);
+
/*
* we need this if more than one processor can write to our tail
* at a time, it synchronizes IO on IA64/Altix systems
goto out_error;
}
- nv_vlan_mode(dev, dev->features);
+ if (id->driver_data & DEV_HAS_VLAN)
+ nv_vlan_mode(dev, dev->features);
netif_carrier_off(dev);
/* Tell the skb what kind of packet this is */
skb->protocol = eth_type_trans(skb, dev);
- /* Set vlan tag */
- if (fcb->flags & RXFCB_VLN)
+ /*
+ * There's need to check for NETIF_F_HW_VLAN_RX here.
+ * Even if vlan rx accel is disabled, on some chips
+ * RXFCB_VLN is pseudo randomly set.
+ */
+ if (dev->features & NETIF_F_HW_VLAN_RX &&
+ fcb->flags & RXFCB_VLN)
__vlan_hwaccel_put_tag(skb, fcb->vlctl);
/* Send the packet up the stack */
{
unsigned int last_rule_idx = priv->cur_filer_idx;
unsigned int cmp_rqfpr;
- unsigned int local_rqfpr[MAX_FILER_IDX + 1];
- unsigned int local_rqfcr[MAX_FILER_IDX + 1];
+ unsigned int *local_rqfpr;
+ unsigned int *local_rqfcr;
int i = 0x0, k = 0x0;
int j = MAX_FILER_IDX, l = 0x0;
+ int ret = 1;
+
+ local_rqfpr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1),
+ GFP_KERNEL);
+ local_rqfcr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1),
+ GFP_KERNEL);
+ if (!local_rqfpr || !local_rqfcr) {
+ pr_err("Out of memory\n");
+ ret = 0;
+ goto err;
+ }
switch (class) {
case TCP_V4_FLOW:
break;
default:
pr_err("Right now this class is not supported\n");
- return 0;
+ ret = 0;
+ goto err;
}
for (i = 0; i < MAX_FILER_IDX + 1; i++) {
if (i == MAX_FILER_IDX + 1) {
pr_err("No parse rule found, can't create hash rules\n");
- return 0;
+ ret = 0;
+ goto err;
}
/* If a match was found, then it begins the starting of a cluster rule
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
- return 1;
+err:
+ kfree(local_rqfcr);
+ kfree(local_rqfpr);
+ return ret;
}
static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd)
u32 i = 0;
list_for_each_entry(comp, &priv->rx_list.list, list) {
- if (i <= cmd->rule_cnt) {
- rule_locs[i] = comp->fs.location;
- i++;
- }
+ if (i == cmd->rule_cnt)
+ return -EMSGSIZE;
+ rule_locs[i] = comp->fs.location;
+ i++;
}
cmd->data = MAX_FILER_IDX;
dma_sync_single_for_device(greth->dev, dma_addr, skb->len, DMA_TO_DEVICE);
status = GRETH_BD_EN | GRETH_BD_IE | (skb->len & GRETH_BD_LEN);
+ greth->tx_bufs_length[greth->tx_next] = skb->len & GRETH_BD_LEN;
/* Wrap around descriptor ring */
if (greth->tx_next == GRETH_TXBD_NUM_MASK) {
if (nr_frags != 0)
status = GRETH_TXBD_MORE;
- status |= GRETH_TXBD_CSALL;
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ status |= GRETH_TXBD_CSALL;
status |= skb_headlen(skb) & GRETH_BD_LEN;
if (greth->tx_next == GRETH_TXBD_NUM_MASK)
status |= GRETH_BD_WR;
greth->tx_skbuff[curr_tx] = NULL;
bdp = greth->tx_bd_base + curr_tx;
- status = GRETH_TXBD_CSALL | GRETH_BD_EN;
+ status = GRETH_BD_EN;
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ status |= GRETH_TXBD_CSALL;
status |= frag->size & GRETH_BD_LEN;
/* Wrap around descriptor ring */
dev->stats.tx_fifo_errors++;
}
dev->stats.tx_packets++;
+ dev->stats.tx_bytes += greth->tx_bufs_length[greth->tx_last];
greth->tx_last = NEXT_TX(greth->tx_last);
greth->tx_free++;
}
greth->tx_skbuff[greth->tx_last] = NULL;
greth_update_tx_stats(dev, stat);
+ dev->stats.tx_bytes += skb->len;
bdp = greth->tx_bd_base + greth->tx_last;
memcpy(skb_put(skb, pkt_len), phys_to_virt(dma_addr), pkt_len);
skb->protocol = eth_type_trans(skb, dev);
+ dev->stats.rx_bytes += pkt_len;
dev->stats.rx_packets++;
netif_receive_skb(skb);
}
skb->protocol = eth_type_trans(skb, dev);
dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
netif_receive_skb(skb);
greth->rx_skbuff[greth->rx_cur] = newskb;
unsigned char *tx_bufs[GRETH_TXBD_NUM];
unsigned char *rx_bufs[GRETH_RXBD_NUM];
+ u16 tx_bufs_length[GRETH_TXBD_NUM];
u16 tx_next;
u16 tx_last;
}
/* recycle the current buffer on the rx queue */
-static void ibmveth_rxq_recycle_buffer(struct ibmveth_adapter *adapter)
+static int ibmveth_rxq_recycle_buffer(struct ibmveth_adapter *adapter)
{
u32 q_index = adapter->rx_queue.index;
u64 correlator = adapter->rx_queue.queue_addr[q_index].correlator;
unsigned int index = correlator & 0xffffffffUL;
union ibmveth_buf_desc desc;
unsigned long lpar_rc;
+ int ret = 1;
BUG_ON(pool >= IBMVETH_NUM_BUFF_POOLS);
BUG_ON(index >= adapter->rx_buff_pool[pool].size);
if (!adapter->rx_buff_pool[pool].active) {
ibmveth_rxq_harvest_buffer(adapter);
ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[pool]);
- return;
+ goto out;
}
desc.fields.flags_len = IBMVETH_BUF_VALID |
netdev_dbg(adapter->netdev, "h_add_logical_lan_buffer failed "
"during recycle rc=%ld", lpar_rc);
ibmveth_remove_buffer_from_pool(adapter, adapter->rx_queue.queue_addr[adapter->rx_queue.index].correlator);
+ ret = 0;
}
if (++adapter->rx_queue.index == adapter->rx_queue.num_slots) {
adapter->rx_queue.index = 0;
adapter->rx_queue.toggle = !adapter->rx_queue.toggle;
}
+
+out:
+ return ret;
}
static void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter)
netdev_err(netdev, "unable to request irq 0x%x, rc %d\n",
netdev->irq, rc);
do {
- rc = h_free_logical_lan(adapter->vdev->unit_address);
- } while (H_IS_LONG_BUSY(rc) || (rc == H_BUSY));
+ lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
+ } while (H_IS_LONG_BUSY(lpar_rc) || (lpar_rc == H_BUSY));
goto err_out;
}
struct ibmveth_adapter *adapter = netdev_priv(dev);
unsigned long set_attr, clr_attr, ret_attr;
unsigned long set_attr6, clr_attr6;
- long ret, ret6;
+ long ret, ret4, ret6;
int rc1 = 0, rc2 = 0;
int restart = 0;
set_attr = 0;
clr_attr = 0;
+ set_attr6 = 0;
+ clr_attr6 = 0;
if (data) {
set_attr = IBMVETH_ILLAN_IPV4_TCP_CSUM;
if (ret == H_SUCCESS && !(ret_attr & IBMVETH_ILLAN_ACTIVE_TRUNK) &&
!(ret_attr & IBMVETH_ILLAN_TRUNK_PRI_MASK) &&
(ret_attr & IBMVETH_ILLAN_PADDED_PKT_CSUM)) {
- ret = h_illan_attributes(adapter->vdev->unit_address, clr_attr,
+ ret4 = h_illan_attributes(adapter->vdev->unit_address, clr_attr,
set_attr, &ret_attr);
- if (ret != H_SUCCESS) {
+ if (ret4 != H_SUCCESS) {
netdev_err(dev, "unable to change IPv4 checksum "
"offload settings. %d rc=%ld\n",
- data, ret);
+ data, ret4);
+
+ h_illan_attributes(adapter->vdev->unit_address,
+ set_attr, clr_attr, &ret_attr);
+
+ if (data == 1)
+ dev->features &= ~NETIF_F_IP_CSUM;
- ret = h_illan_attributes(adapter->vdev->unit_address,
- set_attr, clr_attr, &ret_attr);
} else {
adapter->fw_ipv4_csum_support = data;
}
if (ret6 != H_SUCCESS) {
netdev_err(dev, "unable to change IPv6 checksum "
"offload settings. %d rc=%ld\n",
- data, ret);
+ data, ret6);
+
+ h_illan_attributes(adapter->vdev->unit_address,
+ set_attr6, clr_attr6, &ret_attr);
+
+ if (data == 1)
+ dev->features &= ~NETIF_F_IPV6_CSUM;
- ret = h_illan_attributes(adapter->vdev->unit_address,
- set_attr6, clr_attr6,
- &ret_attr);
} else
adapter->fw_ipv6_csum_support = data;
- if (ret != H_SUCCESS || ret6 != H_SUCCESS)
+ if (ret4 == H_SUCCESS || ret6 == H_SUCCESS)
adapter->rx_csum = data;
else
rc1 = -EIO;
union ibmveth_buf_desc descs[6];
int last, i;
int force_bounce = 0;
+ dma_addr_t dma_addr;
/*
* veth handles a maximum of 6 segments including the header, so
}
/* Map the header */
- descs[0].fields.address = dma_map_single(&adapter->vdev->dev, skb->data,
- skb_headlen(skb),
- DMA_TO_DEVICE);
- if (dma_mapping_error(&adapter->vdev->dev, descs[0].fields.address))
+ dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
+ skb_headlen(skb), DMA_TO_DEVICE);
+ if (dma_mapping_error(&adapter->vdev->dev, dma_addr))
goto map_failed;
descs[0].fields.flags_len = desc_flags | skb_headlen(skb);
+ descs[0].fields.address = dma_addr;
/* Map the frags */
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- unsigned long dma_addr;
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
dma_addr = dma_map_page(&adapter->vdev->dev, frag->page,
netdev->stats.tx_bytes += skb->len;
}
- for (i = 0; i < skb_shinfo(skb)->nr_frags + 1; i++)
+ dma_unmap_single(&adapter->vdev->dev,
+ descs[0].fields.address,
+ descs[0].fields.flags_len & IBMVETH_BUF_LEN_MASK,
+ DMA_TO_DEVICE);
+
+ for (i = 1; i < skb_shinfo(skb)->nr_frags + 1; i++)
dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address,
descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK,
DMA_TO_DEVICE);
if (rx_flush)
ibmveth_flush_buffer(skb->data,
length + offset);
+ if (!ibmveth_rxq_recycle_buffer(adapter))
+ kfree_skb(skb);
skb = new_skb;
- ibmveth_rxq_recycle_buffer(adapter);
} else {
ibmveth_rxq_harvest_buffer(adapter);
skb_reserve(skb, offset);
if (ring_is_rsc_enabled(rx_ring))
pkt_is_rsc = ixgbe_get_rsc_state(rx_desc);
- /* if this is a skb from previous receive DMA will be 0 */
- if (rx_buffer_info->dma) {
+ /* linear means we are building an skb from multiple pages */
+ if (!skb_is_nonlinear(skb)) {
u16 hlen;
if (pkt_is_rsc &&
!(staterr & IXGBE_RXD_STAT_EOP) &&
if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb,
staterr);
- if (!ddp_bytes)
+ if (!ddp_bytes) {
+ dev_kfree_skb_any(skb);
goto next_desc;
+ }
}
#endif /* IXGBE_FCOE */
ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
}
}
-module_init(init_netconsole);
+/*
+ * Use late_initcall to ensure netconsole is
+ * initialized after network device driver if built-in.
+ *
+ * late_initcall() and module_init() are identical if built as module.
+ */
+late_initcall(init_netconsole);
module_exit(cleanup_netconsole);
/* Reset */
#define PCH_GBE_ALL_RST 0x80000000 /* All reset */
-#define PCH_GBE_TX_RST 0x40000000 /* TX MAC, TX FIFO, TX DMA reset */
-#define PCH_GBE_RX_RST 0x04000000 /* RX MAC, RX FIFO, RX DMA reset */
+#define PCH_GBE_TX_RST 0x00008000 /* TX MAC, TX FIFO, TX DMA reset */
+#define PCH_GBE_RX_RST 0x00004000 /* RX MAC, RX FIFO, RX DMA reset */
/* TCP/IP Accelerator Control */
#define PCH_GBE_EX_LIST_EN 0x00000008 /* External List Enable */
#define PCH_GBE_RX_DMA_EN 0x00000002 /* Enables Receive DMA */
#define PCH_GBE_TX_DMA_EN 0x00000001 /* Enables Transmission DMA */
+/* RX DMA STATUS */
+#define PCH_GBE_IDLE_CHECK 0xFFFFFFFE
+
/* Wake On LAN Status */
#define PCH_GBE_WLS_BR 0x00000008 /* Broadcas Address */
#define PCH_GBE_WLS_MLT 0x00000004 /* Multicast Address */
struct pch_gbe_buffer {
struct sk_buff *skb;
dma_addr_t dma;
+ unsigned char *rx_buffer;
unsigned long time_stamp;
u16 length;
bool mapped;
struct pch_gbe_rx_ring {
struct pch_gbe_rx_desc *desc;
dma_addr_t dma;
+ unsigned char *rx_buff_pool;
+ dma_addr_t rx_buff_pool_logic;
+ unsigned int rx_buff_pool_size;
unsigned int size;
unsigned int count;
unsigned int next_to_use;
unsigned long rx_buffer_len;
unsigned long tx_queue_len;
bool have_msi;
+ bool rx_stop_flag;
};
extern const char pch_driver_version[];
#include "pch_gbe.h"
#include "pch_gbe_api.h"
-#include <linux/prefetch.h>
#define DRV_VERSION "1.00"
const char pch_driver_version[] = DRV_VERSION;
#define PCH_GBE_WATCHDOG_PERIOD (1 * HZ) /* watchdog time */
#define PCH_GBE_COPYBREAK_DEFAULT 256
#define PCH_GBE_PCI_BAR 1
+#define PCH_GBE_RESERVE_MEMORY 0x200000 /* 2MB */
/* Macros for ML7223 */
#define PCI_VENDOR_ID_ROHM 0x10db
#define PCI_DEVICE_ID_ROHM_ML7223_GBE 0x8013
+/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7831_GBE 0x8802
+
#define PCH_GBE_TX_WEIGHT 64
#define PCH_GBE_RX_WEIGHT 64
#define PCH_GBE_RX_BUFFER_WRITE 16
)
/* Ethertype field values */
+#define PCH_GBE_MAX_RX_BUFFER_SIZE 0x2880
#define PCH_GBE_MAX_JUMBO_FRAME_SIZE 10318
#define PCH_GBE_FRAME_SIZE_2048 2048
#define PCH_GBE_FRAME_SIZE_4096 4096
#define PCH_GBE_INT_ENABLE_MASK ( \
PCH_GBE_INT_RX_DMA_CMPLT | \
PCH_GBE_INT_RX_DSC_EMP | \
+ PCH_GBE_INT_RX_FIFO_ERR | \
PCH_GBE_INT_WOL_DET | \
PCH_GBE_INT_TX_CMPLT \
)
+#define PCH_GBE_INT_DISABLE_ALL 0
static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT;
if (!tmp)
pr_err("Error: busy bit is not cleared\n");
}
+
+/**
+ * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context
+ * @reg: Pointer of register
+ * @busy: Busy bit
+ */
+static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit)
+{
+ u32 tmp;
+ int ret = -1;
+ /* wait busy */
+ tmp = 20;
+ while ((ioread32(reg) & bit) && --tmp)
+ udelay(5);
+ if (!tmp)
+ pr_err("Error: busy bit is not cleared\n");
+ else
+ ret = 0;
+ return ret;
+}
+
/**
* pch_gbe_mac_mar_set - Set MAC address register
* @hw: Pointer to the HW structure
return;
}
+static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw)
+{
+ /* Read the MAC address. and store to the private data */
+ pch_gbe_mac_read_mac_addr(hw);
+ iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET);
+ pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST);
+ /* Setup the MAC address */
+ pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
+ return;
+}
+
/**
* pch_gbe_mac_init_rx_addrs - Initialize receive address's
* @hw: Pointer to the HW structure
tcpip = ioread32(&hw->reg->TCPIP_ACC);
- if (netdev->features & NETIF_F_RXCSUM) {
- tcpip &= ~PCH_GBE_RX_TCPIPACC_OFF;
- tcpip |= PCH_GBE_RX_TCPIPACC_EN;
- } else {
- tcpip |= PCH_GBE_RX_TCPIPACC_OFF;
- tcpip &= ~PCH_GBE_RX_TCPIPACC_EN;
- }
+ tcpip |= PCH_GBE_RX_TCPIPACC_OFF;
+ tcpip &= ~PCH_GBE_RX_TCPIPACC_EN;
iowrite32(tcpip, &hw->reg->TCPIP_ACC);
return;
}
iowrite32(rdba, &hw->reg->RX_DSC_BASE);
iowrite32(rdlen, &hw->reg->RX_DSC_SIZE);
iowrite32((rdba + rdlen), &hw->reg->RX_DSC_SW_P);
-
- /* Enables Receive DMA */
- rxdma = ioread32(&hw->reg->DMA_CTRL);
- rxdma |= PCH_GBE_RX_DMA_EN;
- iowrite32(rxdma, &hw->reg->DMA_CTRL);
- /* Enables Receive */
- iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN);
}
/**
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
+static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter)
+{
+ struct pch_gbe_hw *hw = &adapter->hw;
+ u32 rxdma;
+ u16 value;
+ int ret;
+
+ /* Disable Receive DMA */
+ rxdma = ioread32(&hw->reg->DMA_CTRL);
+ rxdma &= ~PCH_GBE_RX_DMA_EN;
+ iowrite32(rxdma, &hw->reg->DMA_CTRL);
+ /* Wait Rx DMA BUS is IDLE */
+ ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK);
+ if (ret) {
+ /* Disable Bus master */
+ pci_read_config_word(adapter->pdev, PCI_COMMAND, &value);
+ value &= ~PCI_COMMAND_MASTER;
+ pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
+ /* Stop Receive */
+ pch_gbe_mac_reset_rx(hw);
+ /* Enable Bus master */
+ value |= PCI_COMMAND_MASTER;
+ pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
+ } else {
+ /* Stop Receive */
+ pch_gbe_mac_reset_rx(hw);
+ }
+}
+
+static void pch_gbe_start_receive(struct pch_gbe_hw *hw)
+{
+ u32 rxdma;
+
+ /* Enables Receive DMA */
+ rxdma = ioread32(&hw->reg->DMA_CTRL);
+ rxdma |= PCH_GBE_RX_DMA_EN;
+ iowrite32(rxdma, &hw->reg->DMA_CTRL);
+ /* Enables Receive */
+ iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN);
+ return;
+}
+
/**
* pch_gbe_intr - Interrupt Handler
* @irq: Interrupt number
if (int_st & PCH_GBE_INT_RX_FRAME_ERR)
adapter->stats.intr_rx_frame_err_count++;
if (int_st & PCH_GBE_INT_RX_FIFO_ERR)
- adapter->stats.intr_rx_fifo_err_count++;
+ if (!adapter->rx_stop_flag) {
+ adapter->stats.intr_rx_fifo_err_count++;
+ pr_debug("Rx fifo over run\n");
+ adapter->rx_stop_flag = true;
+ int_en = ioread32(&hw->reg->INT_EN);
+ iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR),
+ &hw->reg->INT_EN);
+ pch_gbe_stop_receive(adapter);
+ int_st |= ioread32(&hw->reg->INT_ST);
+ int_st = int_st & ioread32(&hw->reg->INT_EN);
+ }
if (int_st & PCH_GBE_INT_RX_DMA_ERR)
adapter->stats.intr_rx_dma_err_count++;
if (int_st & PCH_GBE_INT_TX_FIFO_ERR)
/* When Rx descriptor is empty */
if ((int_st & PCH_GBE_INT_RX_DSC_EMP)) {
adapter->stats.intr_rx_dsc_empty_count++;
- pr_err("Rx descriptor is empty\n");
+ pr_debug("Rx descriptor is empty\n");
int_en = ioread32(&hw->reg->INT_EN);
iowrite32((int_en & ~PCH_GBE_INT_RX_DSC_EMP), &hw->reg->INT_EN);
if (hw->mac.tx_fc_enable) {
/* Set Pause packet */
pch_gbe_mac_set_pause_packet(hw);
}
- if ((int_en & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT))
- == 0) {
- return IRQ_HANDLED;
- }
}
/* When request status is Receive interruption */
- if ((int_st & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT))) {
+ if ((int_st & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT)) ||
+ (adapter->rx_stop_flag == true)) {
if (likely(napi_schedule_prep(&adapter->napi))) {
/* Enable only Rx Descriptor empty */
atomic_inc(&adapter->irq_sem);
unsigned int i;
unsigned int bufsz;
- bufsz = adapter->rx_buffer_len + PCH_GBE_DMA_ALIGN;
+ bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
i = rx_ring->next_to_use;
while ((cleaned_count--)) {
buffer_info = &rx_ring->buffer_info[i];
- skb = buffer_info->skb;
- if (skb) {
- skb_trim(skb, 0);
- } else {
- skb = netdev_alloc_skb(netdev, bufsz);
- if (unlikely(!skb)) {
- /* Better luck next round */
- adapter->stats.rx_alloc_buff_failed++;
- break;
- }
- /* 64byte align */
- skb_reserve(skb, PCH_GBE_DMA_ALIGN);
-
- buffer_info->skb = skb;
- buffer_info->length = adapter->rx_buffer_len;
+ skb = netdev_alloc_skb(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->stats.rx_alloc_buff_failed++;
+ break;
}
+ /* align */
+ skb_reserve(skb, NET_IP_ALIGN);
+ buffer_info->skb = skb;
+
buffer_info->dma = dma_map_single(&pdev->dev,
- skb->data,
+ buffer_info->rx_buffer,
buffer_info->length,
DMA_FROM_DEVICE);
if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)) {
return;
}
+static int
+pch_gbe_alloc_rx_buffers_pool(struct pch_gbe_adapter *adapter,
+ struct pch_gbe_rx_ring *rx_ring, int cleaned_count)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct pch_gbe_buffer *buffer_info;
+ unsigned int i;
+ unsigned int bufsz;
+ unsigned int size;
+
+ bufsz = adapter->rx_buffer_len;
+
+ size = rx_ring->count * bufsz + PCH_GBE_RESERVE_MEMORY;
+ rx_ring->rx_buff_pool = dma_alloc_coherent(&pdev->dev, size,
+ &rx_ring->rx_buff_pool_logic,
+ GFP_KERNEL);
+ if (!rx_ring->rx_buff_pool) {
+ pr_err("Unable to allocate memory for the receive poll buffer\n");
+ return -ENOMEM;
+ }
+ memset(rx_ring->rx_buff_pool, 0, size);
+ rx_ring->rx_buff_pool_size = size;
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ buffer_info->rx_buffer = rx_ring->rx_buff_pool + bufsz * i;
+ buffer_info->length = bufsz;
+ }
+ return 0;
+}
+
/**
* pch_gbe_alloc_tx_buffers - Allocate transmit buffers
* @adapter: Board private structure
struct sk_buff *skb;
unsigned int i;
unsigned int cleaned_count = 0;
- bool cleaned = false;
+ bool cleaned = true;
pr_debug("next_to_clean : %d\n", tx_ring->next_to_clean);
while ((tx_desc->gbec_status & DSC_INIT16) == 0x0000) {
pr_debug("gbec_status:0x%04x\n", tx_desc->gbec_status);
- cleaned = true;
buffer_info = &tx_ring->buffer_info[i];
skb = buffer_info->skb;
tx_desc = PCH_GBE_TX_DESC(*tx_ring, i);
/* weight of a sort for tx, to avoid endless transmit cleanup */
- if (cleaned_count++ == PCH_GBE_TX_WEIGHT)
+ if (cleaned_count++ == PCH_GBE_TX_WEIGHT) {
+ cleaned = false;
break;
+ }
}
pr_debug("called pch_gbe_unmap_and_free_tx_resource() %d count\n",
cleaned_count);
unsigned int i;
unsigned int cleaned_count = 0;
bool cleaned = false;
- struct sk_buff *skb, *new_skb;
+ struct sk_buff *skb;
u8 dma_status;
u16 gbec_status;
u32 tcp_ip_status;
rx_desc->gbec_status = DSC_INIT16;
buffer_info = &rx_ring->buffer_info[i];
skb = buffer_info->skb;
+ buffer_info->skb = NULL;
/* unmap dma */
dma_unmap_single(&pdev->dev, buffer_info->dma,
buffer_info->length, DMA_FROM_DEVICE);
buffer_info->mapped = false;
- /* Prefetch the packet */
- prefetch(skb->data);
pr_debug("RxDecNo = 0x%04x Status[DMA:0x%02x GBE:0x%04x "
"TCP:0x%08x] BufInf = 0x%p\n",
pr_err("Receive CRC Error\n");
} else {
/* get receive length */
- /* length convert[-3] */
- length = (rx_desc->rx_words_eob) - 3;
-
- /* Decide the data conversion method */
- if (!(netdev->features & NETIF_F_RXCSUM)) {
- /* [Header:14][payload] */
- if (NET_IP_ALIGN) {
- /* Because alignment differs,
- * the new_skb is newly allocated,
- * and data is copied to new_skb.*/
- new_skb = netdev_alloc_skb(netdev,
- length + NET_IP_ALIGN);
- if (!new_skb) {
- /* dorrop error */
- pr_err("New skb allocation "
- "Error\n");
- goto dorrop;
- }
- skb_reserve(new_skb, NET_IP_ALIGN);
- memcpy(new_skb->data, skb->data,
- length);
- skb = new_skb;
- } else {
- /* DMA buffer is used as SKB as it is.*/
- buffer_info->skb = NULL;
- }
- } else {
- /* [Header:14][padding:2][payload] */
- /* The length includes padding length */
- length = length - PCH_GBE_DMA_PADDING;
- if ((length < copybreak) ||
- (NET_IP_ALIGN != PCH_GBE_DMA_PADDING)) {
- /* Because alignment differs,
- * the new_skb is newly allocated,
- * and data is copied to new_skb.
- * Padding data is deleted
- * at the time of a copy.*/
- new_skb = netdev_alloc_skb(netdev,
- length + NET_IP_ALIGN);
- if (!new_skb) {
- /* dorrop error */
- pr_err("New skb allocation "
- "Error\n");
- goto dorrop;
- }
- skb_reserve(new_skb, NET_IP_ALIGN);
- memcpy(new_skb->data, skb->data,
- ETH_HLEN);
- memcpy(&new_skb->data[ETH_HLEN],
- &skb->data[ETH_HLEN +
- PCH_GBE_DMA_PADDING],
- length - ETH_HLEN);
- skb = new_skb;
- } else {
- /* Padding data is deleted
- * by moving header data.*/
- memmove(&skb->data[PCH_GBE_DMA_PADDING],
- &skb->data[0], ETH_HLEN);
- skb_reserve(skb, NET_IP_ALIGN);
- buffer_info->skb = NULL;
- }
- }
- /* The length includes FCS length */
- length = length - ETH_FCS_LEN;
+ /* length convert[-3], length includes FCS length */
+ length = (rx_desc->rx_words_eob) - 3 - ETH_FCS_LEN;
+ if (rx_desc->rx_words_eob & 0x02)
+ length = length - 4;
+ /*
+ * buffer_info->rx_buffer: [Header:14][payload]
+ * skb->data: [Reserve:2][Header:14][payload]
+ */
+ memcpy(skb->data, buffer_info->rx_buffer, length);
+
/* update status of driver */
adapter->stats.rx_bytes += length;
adapter->stats.rx_packets++;
pr_debug("Receive skb->ip_summed: %d length: %d\n",
skb->ip_summed, length);
}
-dorrop:
/* return some buffers to hardware, one at a time is too slow */
if (unlikely(cleaned_count >= PCH_GBE_RX_BUFFER_WRITE)) {
pch_gbe_alloc_rx_buffers(adapter, rx_ring,
pr_err("Error: can't bring device up\n");
return err;
}
+ err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count);
+ if (err) {
+ pr_err("Error: can't bring device up\n");
+ return err;
+ }
pch_gbe_alloc_tx_buffers(adapter, tx_ring);
pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count);
adapter->tx_queue_len = netdev->tx_queue_len;
+ pch_gbe_start_receive(&adapter->hw);
mod_timer(&adapter->watchdog_timer, jiffies);
void pch_gbe_down(struct pch_gbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
+ struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
/* signal that we're down so the interrupt handler does not
* reschedule our watchdog timer */
pch_gbe_reset(adapter);
pch_gbe_clean_tx_ring(adapter, adapter->tx_ring);
pch_gbe_clean_rx_ring(adapter, adapter->rx_ring);
+
+ pci_free_consistent(adapter->pdev, rx_ring->rx_buff_pool_size,
+ rx_ring->rx_buff_pool, rx_ring->rx_buff_pool_logic);
+ rx_ring->rx_buff_pool_logic = 0;
+ rx_ring->rx_buff_pool_size = 0;
+ rx_ring->rx_buff_pool = NULL;
}
/**
{
struct pch_gbe_adapter *adapter = netdev_priv(netdev);
int max_frame;
+ unsigned long old_rx_buffer_len = adapter->rx_buffer_len;
+ int err;
max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
else if (max_frame <= PCH_GBE_FRAME_SIZE_8192)
adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_8192;
else
- adapter->rx_buffer_len = PCH_GBE_MAX_JUMBO_FRAME_SIZE;
- netdev->mtu = new_mtu;
- adapter->hw.mac.max_frame_size = max_frame;
+ adapter->rx_buffer_len = PCH_GBE_MAX_RX_BUFFER_SIZE;
- if (netif_running(netdev))
- pch_gbe_reinit_locked(adapter);
- else
+ if (netif_running(netdev)) {
+ pch_gbe_down(adapter);
+ err = pch_gbe_up(adapter);
+ if (err) {
+ adapter->rx_buffer_len = old_rx_buffer_len;
+ pch_gbe_up(adapter);
+ return -ENOMEM;
+ } else {
+ netdev->mtu = new_mtu;
+ adapter->hw.mac.max_frame_size = max_frame;
+ }
+ } else {
pch_gbe_reset(adapter);
+ netdev->mtu = new_mtu;
+ adapter->hw.mac.max_frame_size = max_frame;
+ }
pr_debug("max_frame : %d rx_buffer_len : %d mtu : %d max_frame_size : %d\n",
max_frame, (u32) adapter->rx_buffer_len, netdev->mtu,
{
struct pch_gbe_adapter *adapter =
container_of(napi, struct pch_gbe_adapter, napi);
- struct net_device *netdev = adapter->netdev;
int work_done = 0;
bool poll_end_flag = false;
bool cleaned = false;
+ u32 int_en;
pr_debug("budget : %d\n", budget);
- /* Keep link state information with original netdev */
- if (!netif_carrier_ok(netdev)) {
- poll_end_flag = true;
- } else {
- cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring);
- pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget);
+ pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget);
+ cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring);
- if (cleaned)
- work_done = budget;
- /* If no Tx and not enough Rx work done,
- * exit the polling mode
- */
- if ((work_done < budget) || !netif_running(netdev))
- poll_end_flag = true;
- }
+ if (!cleaned)
+ work_done = budget;
+ /* If no Tx and not enough Rx work done,
+ * exit the polling mode
+ */
+ if (work_done < budget)
+ poll_end_flag = true;
if (poll_end_flag) {
napi_complete(napi);
+ if (adapter->rx_stop_flag) {
+ adapter->rx_stop_flag = false;
+ pch_gbe_start_receive(&adapter->hw);
+ }
pch_gbe_irq_enable(adapter);
- }
+ } else
+ if (adapter->rx_stop_flag) {
+ adapter->rx_stop_flag = false;
+ pch_gbe_start_receive(&adapter->hw);
+ int_en = ioread32(&adapter->hw.reg->INT_EN);
+ iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR),
+ &adapter->hw.reg->INT_EN);
+ }
pr_debug("poll_end_flag : %d work_done : %d budget : %d\n",
poll_end_flag, work_done, budget);
.class = (PCI_CLASS_NETWORK_ETHERNET << 8),
.class_mask = (0xFFFF00)
},
+ {.vendor = PCI_VENDOR_ID_ROHM,
+ .device = PCI_DEVICE_ID_ROHM_ML7831_GBE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .class = (PCI_CLASS_NETWORK_ETHERNET << 8),
+ .class_mask = (0xFFFF00)
+ },
/* required last entry */
{0}
};
prune_rx_ts(dp83640);
if (list_empty(&dp83640->rxpool)) {
- pr_warning("dp83640: rx timestamp pool is empty\n");
+ pr_debug("dp83640: rx timestamp pool is empty\n");
goto out;
}
rxts = list_first_entry(&dp83640->rxpool, struct rxts, list);
skb = skb_dequeue(&dp83640->tx_queue);
if (!skb) {
- pr_warning("dp83640: have timestamp but tx_queue empty\n");
+ pr_debug("dp83640: have timestamp but tx_queue empty\n");
return;
}
ns = phy2txts(phy_txts);
/* DP83865 phy identifier values */
#define DP83865_PHY_ID 0x20005c7a
-#define DP83865_INT_MASK_REG 0x15
-#define DP83865_INT_MASK_STATUS 0x14
+#define DP83865_INT_STATUS 0x14
+#define DP83865_INT_MASK 0x15
+#define DP83865_INT_CLEAR 0x17
#define DP83865_INT_REMOTE_FAULT 0x0008
#define DP83865_INT_ANE_COMPLETED 0x0010
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
- err = phy_write(phydev, DP83865_INT_MASK_REG,
+ err = phy_write(phydev, DP83865_INT_MASK,
DP83865_INT_MASK_DEFAULT);
else
- err = phy_write(phydev, DP83865_INT_MASK_REG, 0);
+ err = phy_write(phydev, DP83865_INT_MASK, 0);
return err;
}
static int ns_ack_interrupt(struct phy_device *phydev)
{
- int ret = phy_read(phydev, DP83865_INT_MASK_STATUS);
+ int ret = phy_read(phydev, DP83865_INT_STATUS);
if (ret < 0)
return ret;
- return 0;
+ /* Clear the interrupt status bit by writing a “1”
+ * to the corresponding bit in INT_CLEAR (2:0 are reserved) */
+ ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7);
+
+ return ret;
}
static void ns_giga_speed_fallback(struct phy_device *phydev, int mode)
continue;
}
- mtu = pch->chan->mtu - hdrlen;
+ /*
+ * hdrlen includes the 2-byte PPP protocol field, but the
+ * MTU counts only the payload excluding the protocol field.
+ * (RFC1661 Section 2)
+ */
+ mtu = pch->chan->mtu - (hdrlen - 2);
if (mtu < 4)
mtu = 4;
if (flen > mtu)
#include <linux/clk.h>
#include <linux/phy.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
#include <linux/types.h>
#include <asm/pgtable.h>
#include <asm/system.h>
RxOK = 0x0001,
/* RxStatusDesc */
+ RxBOVF = (1 << 24),
RxFOVF = (1 << 23),
RxRWT = (1 << 22),
RxRES = (1 << 21),
struct mii_if_info mii;
struct rtl8169_counters counters;
u32 saved_wolopts;
+ u32 opts1_mask;
struct rtl_fw {
const struct firmware *fw;
MODULE_FIRMWARE(FIRMWARE_8168D_2);
MODULE_FIRMWARE(FIRMWARE_8168E_1);
MODULE_FIRMWARE(FIRMWARE_8168E_2);
+MODULE_FIRMWARE(FIRMWARE_8168E_3);
MODULE_FIRMWARE(FIRMWARE_8105E_1);
static int rtl8169_open(struct net_device *dev);
netif_err(tp, link, dev, "PHY reset failed\n");
}
+static bool rtl_tbi_enabled(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ return (tp->mac_version == RTL_GIGA_MAC_VER_01) &&
+ (RTL_R8(PHYstatus) & TBI_Enable);
+}
+
static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full : 0));
- if (RTL_R8(PHYstatus) & TBI_Enable)
+ if (rtl_tbi_enabled(tp))
netif_info(tp, link, dev, "TBI auto-negotiating\n");
}
static void r810x_pll_power_down(struct rtl8169_private *tp)
{
+ void __iomem *ioaddr = tp->mmio_addr;
+
if (__rtl8169_get_wol(tp) & WAKE_ANY) {
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, MII_BMCR, 0x0000);
+
+ if (tp->mac_version == RTL_GIGA_MAC_VER_29 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_30)
+ RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
+ AcceptMulticast | AcceptMyPhys);
return;
}
rtl_writephy(tp, MII_BMCR, 0x0000);
if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
- tp->mac_version == RTL_GIGA_MAC_VER_33)
+ tp->mac_version == RTL_GIGA_MAC_VER_33 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_34)
RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
AcceptMulticast | AcceptMyPhys);
return;
tp->features |= rtl_try_msi(pdev, ioaddr, cfg);
RTL_W8(Cfg9346, Cfg9346_Lock);
- if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) &&
- (RTL_R8(PHYstatus) & TBI_Enable)) {
+ if (rtl_tbi_enabled(tp)) {
tp->set_speed = rtl8169_set_speed_tbi;
tp->get_settings = rtl8169_gset_tbi;
tp->phy_reset_enable = rtl8169_tbi_reset_enable;
tp->intr_event = cfg->intr_event;
tp->napi_event = cfg->napi_event;
+ tp->opts1_mask = (tp->mac_version != RTL_GIGA_MAC_VER_01) ?
+ ~(RxBOVF | RxFOVF) : ~0;
+
init_timer(&tp->timer);
tp->timer.data = (unsigned long) dev;
tp->timer.function = rtl8169_phy_timer;
while (RTL_R8(TxPoll) & NPQ)
udelay(20);
} else if (tp->mac_version == RTL_GIGA_MAC_VER_34) {
+ RTL_W8(ChipCmd, RTL_R8(ChipCmd) | StopReq);
while (!(RTL_R32(TxConfig) & TXCFG_EMPTY))
udelay(100);
} else {
u32 status;
rmb();
- status = le32_to_cpu(desc->opts1);
+ status = le32_to_cpu(desc->opts1) & tp->opts1_mask;
if (status & DescOwn)
break;
*/
static struct rio_dev **rionet_active;
-#define is_rionet_capable(pef, src_ops, dst_ops) \
- ((pef & RIO_PEF_INB_MBOX) && \
- (pef & RIO_PEF_INB_DOORBELL) && \
+#define is_rionet_capable(src_ops, dst_ops) \
+ ((src_ops & RIO_SRC_OPS_DATA_MSG) && \
+ (dst_ops & RIO_DST_OPS_DATA_MSG) && \
(src_ops & RIO_SRC_OPS_DOORBELL) && \
(dst_ops & RIO_DST_OPS_DOORBELL))
#define dev_rionet_capable(dev) \
- is_rionet_capable(dev->pef, dev->src_ops, dev->dst_ops)
+ is_rionet_capable(dev->src_ops, dev->dst_ops)
#define RIONET_MAC_MATCH(x) (*(u32 *)x == 0x00010001)
#define RIONET_GET_DESTID(x) (*(u16 *)(x + 4))
{
int i, rc = 0;
struct rionet_peer *peer, *tmp;
- u32 pwdcsr;
struct rionet_private *rnet = netdev_priv(ndev);
if (netif_msg_ifup(rnet))
continue;
}
- /*
- * If device has initialized inbound doorbells,
- * send a join message
- */
- rio_read_config_32(peer->rdev, RIO_WRITE_PORT_CSR, &pwdcsr);
- if (pwdcsr & RIO_DOORBELL_AVAIL)
- rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN);
+ /* Send a join message */
+ rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN);
}
out:
static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id)
{
int rc = -ENODEV;
- u32 lpef, lsrc_ops, ldst_ops;
+ u32 lsrc_ops, ldst_ops;
struct rionet_peer *peer;
struct net_device *ndev = NULL;
* on later probes
*/
if (!rionet_check) {
- rio_local_read_config_32(rdev->net->hport, RIO_PEF_CAR, &lpef);
rio_local_read_config_32(rdev->net->hport, RIO_SRC_OPS_CAR,
&lsrc_ops);
rio_local_read_config_32(rdev->net->hport, RIO_DST_OPS_CAR,
&ldst_ops);
- if (!is_rionet_capable(lpef, lsrc_ops, ldst_ops)) {
+ if (!is_rionet_capable(lsrc_ops, ldst_ops)) {
printk(KERN_ERR
"%s: local device is not network capable\n",
DRV_NAME);
{
struct pci_dev *pci_dev = efx->pci_dev;
dma_addr_t dma_mask = efx->type->max_dma_mask;
- bool use_wc;
int rc;
netif_dbg(efx, probe, efx->net_dev, "initialising I/O\n");
rc = -EIO;
goto fail3;
}
-
- /* bug22643: If SR-IOV is enabled then tx push over a write combined
- * mapping is unsafe. We need to disable write combining in this case.
- * MSI is unsupported when SR-IOV is enabled, and the firmware will
- * have removed the MSI capability. So write combining is safe if
- * there is an MSI capability.
- */
- use_wc = (!EFX_WORKAROUND_22643(efx) ||
- pci_find_capability(pci_dev, PCI_CAP_ID_MSI));
- if (use_wc)
- efx->membase = ioremap_wc(efx->membase_phys,
- efx->type->mem_map_size);
- else
- efx->membase = ioremap_nocache(efx->membase_phys,
- efx->type->mem_map_size);
+ efx->membase = ioremap_nocache(efx->membase_phys,
+ efx->type->mem_map_size);
if (!efx->membase) {
netif_err(efx, probe, efx->net_dev,
"could not map memory BAR at %llx+%x\n",
_efx_writed(efx, value->u32[2], reg + 8);
_efx_writed(efx, value->u32[3], reg + 12);
#endif
- wmb();
mmiowb();
spin_unlock_irqrestore(&efx->biu_lock, flags);
}
__raw_writel((__force u32)value->u32[0], membase + addr);
__raw_writel((__force u32)value->u32[1], membase + addr + 4);
#endif
- wmb();
mmiowb();
spin_unlock_irqrestore(&efx->biu_lock, flags);
}
/* No lock required */
_efx_writed(efx, value->u32[0], reg);
- wmb();
}
/* Read a 128-bit CSR, locking as appropriate. */
spin_lock_irqsave(&efx->biu_lock, flags);
value->u32[0] = _efx_readd(efx, reg + 0);
- rmb();
value->u32[1] = _efx_readd(efx, reg + 4);
value->u32[2] = _efx_readd(efx, reg + 8);
value->u32[3] = _efx_readd(efx, reg + 12);
value->u64[0] = (__force __le64)__raw_readq(membase + addr);
#else
value->u32[0] = (__force __le32)__raw_readl(membase + addr);
- rmb();
value->u32[1] = (__force __le32)__raw_readl(membase + addr + 4);
#endif
spin_unlock_irqrestore(&efx->biu_lock, flags);
_efx_writed(efx, value->u32[2], reg + 8);
_efx_writed(efx, value->u32[3], reg + 12);
#endif
- wmb();
}
#define efx_writeo_page(efx, value, reg, page) \
_efx_writeo_page(efx, value, \
return &nic_data->mcdi;
}
-static inline void
-efx_mcdi_readd(struct efx_nic *efx, efx_dword_t *value, unsigned reg)
-{
- struct siena_nic_data *nic_data = efx->nic_data;
- value->u32[0] = (__force __le32)__raw_readl(nic_data->mcdi_smem + reg);
-}
-
-static inline void
-efx_mcdi_writed(struct efx_nic *efx, const efx_dword_t *value, unsigned reg)
-{
- struct siena_nic_data *nic_data = efx->nic_data;
- __raw_writel((__force u32)value->u32[0], nic_data->mcdi_smem + reg);
-}
-
void efx_mcdi_init(struct efx_nic *efx)
{
struct efx_mcdi_iface *mcdi;
const u8 *inbuf, size_t inlen)
{
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
- unsigned pdu = MCDI_PDU(efx);
- unsigned doorbell = MCDI_DOORBELL(efx);
+ unsigned pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
+ unsigned doorbell = FR_CZ_MC_TREG_SMEM + MCDI_DOORBELL(efx);
unsigned int i;
efx_dword_t hdr;
u32 xflags, seqno;
MCDI_HEADER_SEQ, seqno,
MCDI_HEADER_XFLAGS, xflags);
- efx_mcdi_writed(efx, &hdr, pdu);
+ efx_writed(efx, &hdr, pdu);
for (i = 0; i < inlen; i += 4)
- efx_mcdi_writed(efx, (const efx_dword_t *)(inbuf + i),
- pdu + 4 + i);
+ _efx_writed(efx, *((__le32 *)(inbuf + i)), pdu + 4 + i);
+
+ /* Ensure the payload is written out before the header */
+ wmb();
/* ring the doorbell with a distinctive value */
- EFX_POPULATE_DWORD_1(hdr, EFX_DWORD_0, 0x45789abc);
- efx_mcdi_writed(efx, &hdr, doorbell);
+ _efx_writed(efx, (__force __le32) 0x45789abc, doorbell);
}
static void efx_mcdi_copyout(struct efx_nic *efx, u8 *outbuf, size_t outlen)
{
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
- unsigned int pdu = MCDI_PDU(efx);
+ unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
int i;
BUG_ON(atomic_read(&mcdi->state) == MCDI_STATE_QUIESCENT);
BUG_ON(outlen & 3 || outlen >= 0x100);
for (i = 0; i < outlen; i += 4)
- efx_mcdi_readd(efx, (efx_dword_t *)(outbuf + i), pdu + 4 + i);
+ *((__le32 *)(outbuf + i)) = _efx_readd(efx, pdu + 4 + i);
}
static int efx_mcdi_poll(struct efx_nic *efx)
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
unsigned int time, finish;
unsigned int respseq, respcmd, error;
- unsigned int pdu = MCDI_PDU(efx);
+ unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
unsigned int rc, spins;
efx_dword_t reg;
time = get_seconds();
- efx_mcdi_readd(efx, ®, pdu);
+ rmb();
+ efx_readd(efx, ®, pdu);
/* All 1's indicates that shared memory is in reset (and is
* not a valid header). Wait for it to come out reset before
respseq, mcdi->seqno);
rc = EIO;
} else if (error) {
- efx_mcdi_readd(efx, ®, pdu + 4);
+ efx_readd(efx, ®, pdu + 4);
switch (EFX_DWORD_FIELD(reg, EFX_DWORD_0)) {
#define TRANSLATE_ERROR(name) \
case MC_CMD_ERR_ ## name: \
/* Test and clear MC-rebooted flag for this port/function */
int efx_mcdi_poll_reboot(struct efx_nic *efx)
{
- unsigned int addr = MCDI_REBOOT_FLAG(efx);
+ unsigned int addr = FR_CZ_MC_TREG_SMEM + MCDI_REBOOT_FLAG(efx);
efx_dword_t reg;
uint32_t value;
if (efx_nic_rev(efx) < EFX_REV_SIENA_A0)
return false;
- efx_mcdi_readd(efx, ®, addr);
+ efx_readd(efx, ®, addr);
value = EFX_DWORD_FIELD(reg, EFX_DWORD_0);
if (value == 0)
return 0;
EFX_ZERO_DWORD(reg);
- efx_mcdi_writed(efx, ®, addr);
+ efx_writed(efx, ®, addr);
if (value == MC_STATUS_DWORD_ASSERT)
return -EINTR;
size = min_t(size_t, table->step, 16);
- if (table->offset >= efx->type->mem_map_size) {
- /* No longer mapped; return dummy data */
- memcpy(buf, "\xde\xc0\xad\xde", 4);
- buf += table->rows * size;
- continue;
- }
-
for (i = 0; i < table->rows; i++) {
switch (table->step) {
case 4: /* 32-bit register or SRAM */
/**
* struct siena_nic_data - Siena NIC state
* @mcdi: Management-Controller-to-Driver Interface
- * @mcdi_smem: MCDI shared memory mapping. The mapping is always uncacheable.
* @wol_filter_id: Wake-on-LAN packet filter id
*/
struct siena_nic_data {
struct efx_mcdi_iface mcdi;
- void __iomem *mcdi_smem;
int wol_filter_id;
};
efx_reado(efx, ®, FR_AZ_CS_DEBUG);
efx->net_dev->dev_id = EFX_OWORD_FIELD(reg, FRF_CZ_CS_PORT_NUM) - 1;
- /* Initialise MCDI */
- nic_data->mcdi_smem = ioremap_nocache(efx->membase_phys +
- FR_CZ_MC_TREG_SMEM,
- FR_CZ_MC_TREG_SMEM_STEP *
- FR_CZ_MC_TREG_SMEM_ROWS);
- if (!nic_data->mcdi_smem) {
- netif_err(efx, probe, efx->net_dev,
- "could not map MCDI at %llx+%x\n",
- (unsigned long long)efx->membase_phys +
- FR_CZ_MC_TREG_SMEM,
- FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS);
- rc = -ENOMEM;
- goto fail1;
- }
efx_mcdi_init(efx);
/* Recover from a failed assertion before probing */
rc = efx_mcdi_handle_assertion(efx);
if (rc)
- goto fail2;
+ goto fail1;
/* Let the BMC know that the driver is now in charge of link and
* filter settings. We must do this before we reset the NIC */
fail3:
efx_mcdi_drv_attach(efx, false, NULL);
fail2:
- iounmap(nic_data->mcdi_smem);
fail1:
kfree(efx->nic_data);
return rc;
static void siena_remove_nic(struct efx_nic *efx)
{
- struct siena_nic_data *nic_data = efx->nic_data;
-
efx_nic_free_buffer(efx, &efx->irq_status);
siena_reset_hw(efx, RESET_TYPE_ALL);
efx_mcdi_drv_attach(efx, false, NULL);
/* Tear down the private nic state */
- iounmap(nic_data->mcdi_smem);
- kfree(nic_data);
+ kfree(efx->nic_data);
efx->nic_data = NULL;
}
.default_mac_ops = &efx_mcdi_mac_operations,
.revision = EFX_REV_SIENA_A0,
- .mem_map_size = FR_CZ_MC_TREG_SMEM, /* MC_TREG_SMEM mapped separately */
+ .mem_map_size = (FR_CZ_MC_TREG_SMEM +
+ FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS),
.txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL,
.rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL,
.buf_tbl_base = FR_BZ_BUF_FULL_TBL,
#define EFX_WORKAROUND_15783 EFX_WORKAROUND_ALWAYS
/* Legacy interrupt storm when interrupt fifo fills */
#define EFX_WORKAROUND_17213 EFX_WORKAROUND_SIENA
-/* Write combining and sriov=enabled are incompatible */
-#define EFX_WORKAROUND_22643 EFX_WORKAROUND_SIENA
/* Spurious parity errors in TSORT buffers */
#define EFX_WORKAROUND_5129 EFX_WORKAROUND_FALCON_A
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/phy.h>
#include <linux/cache.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/ethtool.h>
}
}
-#ifdef BCM_KERNEL_SUPPORTS_8021Q
if (vlan_tx_tag_present(skb)) {
base_flags |= TXD_FLAG_VLAN;
vlan = vlan_tx_tag_get(skb);
}
-#endif
if (tg3_flag(tp, USE_JUMBO_BDFLAG) &&
!mss && skb->len > VLAN_ETH_FRAME_LEN)
if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) {
if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) {
- struct usb_cdc_ncm_ndp_input_size ndp_in_sz;
+ struct usb_cdc_ncm_ndp_input_size *ndp_in_sz;
+
+ ndp_in_sz = kzalloc(sizeof(*ndp_in_sz), GFP_KERNEL);
+ if (!ndp_in_sz) {
+ err = -ENOMEM;
+ goto size_err;
+ }
+
err = usb_control_msg(ctx->udev,
usb_sndctrlpipe(ctx->udev, 0),
USB_CDC_SET_NTB_INPUT_SIZE,
USB_TYPE_CLASS | USB_DIR_OUT
| USB_RECIP_INTERFACE,
- 0, iface_no, &ndp_in_sz, 8, 1000);
+ 0, iface_no, ndp_in_sz, 8, 1000);
+ kfree(ndp_in_sz);
} else {
- __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
+ __le32 *dwNtbInMaxSize;
+ dwNtbInMaxSize = kzalloc(sizeof(*dwNtbInMaxSize),
+ GFP_KERNEL);
+ if (!dwNtbInMaxSize) {
+ err = -ENOMEM;
+ goto size_err;
+ }
+ *dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
+
err = usb_control_msg(ctx->udev,
usb_sndctrlpipe(ctx->udev, 0),
USB_CDC_SET_NTB_INPUT_SIZE,
USB_TYPE_CLASS | USB_DIR_OUT
| USB_RECIP_INTERFACE,
- 0, iface_no, &dwNtbInMaxSize, 4, 1000);
+ 0, iface_no, dwNtbInMaxSize, 4, 1000);
+ kfree(dwNtbInMaxSize);
}
-
+size_err:
if (err < 0)
pr_debug("Setting NTB Input Size failed\n");
}
/* set Max Datagram Size (MTU) */
if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) {
- __le16 max_datagram_size;
+ __le16 *max_datagram_size;
u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
+
+ max_datagram_size = kzalloc(sizeof(*max_datagram_size),
+ GFP_KERNEL);
+ if (!max_datagram_size) {
+ err = -ENOMEM;
+ goto max_dgram_err;
+ }
+
err = usb_control_msg(ctx->udev, usb_rcvctrlpipe(ctx->udev, 0),
USB_CDC_GET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_IN
| USB_RECIP_INTERFACE,
- 0, iface_no, &max_datagram_size,
+ 0, iface_no, max_datagram_size,
2, 1000);
if (err < 0) {
pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n",
CDC_NCM_MIN_DATAGRAM_SIZE);
+ kfree(max_datagram_size);
} else {
- ctx->max_datagram_size = le16_to_cpu(max_datagram_size);
+ ctx->max_datagram_size =
+ le16_to_cpu(*max_datagram_size);
/* Check Eth descriptor value */
if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) {
if (ctx->max_datagram_size > eth_max_sz)
USB_TYPE_CLASS | USB_DIR_OUT
| USB_RECIP_INTERFACE,
0,
- iface_no, &max_datagram_size,
+ iface_no, max_datagram_size,
2, 1000);
+ kfree(max_datagram_size);
+max_dgram_err:
if (err < 0)
pr_debug("SET_MAX_DATAGRAM_SIZE failed\n");
}
#define USB_PRODUCT_IPHONE_3G 0x1292
#define USB_PRODUCT_IPHONE_3GS 0x1294
#define USB_PRODUCT_IPHONE_4 0x1297
+#define USB_PRODUCT_IPHONE_4_VZW 0x129c
#define IPHETH_USBINTF_CLASS 255
#define IPHETH_USBINTF_SUBCLASS 253
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
{ }
};
MODULE_DEVICE_TABLE(usb, ipheth_table);
mac_set_cam_mask(regs, vptr->mCAMmask);
/* Enable VCAMs */
-
- if (test_bit(0, vptr->active_vlans))
- WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
-
for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) {
mac_set_vlan_cam(regs, i, (u8 *) &vid);
vptr->vCAMmask[i / 8] |= 0x1 << (i % 8);
vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
{
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
- u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
- unsigned long flags;
- VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
- spin_lock_irqsave(&adapter->cmd_lock, flags);
- VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
- VMXNET3_CMD_UPDATE_VLAN_FILTERS);
- spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+ if (!(netdev->flags & IFF_PROMISC)) {
+ u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+ unsigned long flags;
+
+ VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
+ spin_lock_irqsave(&adapter->cmd_lock, flags);
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+ spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+ }
set_bit(vid, adapter->active_vlans);
}
vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
{
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
- u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
- unsigned long flags;
- VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid);
- spin_lock_irqsave(&adapter->cmd_lock, flags);
- VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
- VMXNET3_CMD_UPDATE_VLAN_FILTERS);
- spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+ if (!(netdev->flags & IFF_PROMISC)) {
+ u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+ unsigned long flags;
+
+ VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid);
+ spin_lock_irqsave(&adapter->cmd_lock, flags);
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+ spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+ }
clear_bit(vid, adapter->active_vlans);
}
case ADC_DC_CAL:
/* Run ADC Gain Cal for non-CCK & non 2GHz-HT20 only */
if (!IS_CHAN_B(chan) &&
- !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan)))
+ !((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) &&
+ IS_CHAN_HT20(chan)))
supported = true;
break;
}
{0x00008258, 0x00000000},
{0x0000825c, 0x40000000},
{0x00008260, 0x00080922},
- {0x00008264, 0x9bc00010},
+ {0x00008264, 0x9d400010},
{0x00008268, 0xffffffff},
{0x0000826c, 0x0000ffff},
{0x00008270, 0x00000000},
static const struct ar9300_eeprom ar9300_default = {
.eepromVersion = 2,
.templateVersion = 2,
- .macAddr = {1, 2, 3, 4, 5, 6},
+ .macAddr = {0, 2, 3, 4, 5, 6},
.custData = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
.baseEepHeader = {
REG_WRITE_ARRAY(&ah->iniModesAdditional,
modesIndex, regWrites);
- if (AR_SREV_9300(ah))
+ if (AR_SREV_9330(ah))
REG_WRITE_ARRAY(&ah->iniModesAdditional, 1, regWrites);
if (AR_SREV_9340(ah) && !ah->is_clk_25mhz)
mutex_lock(&sc->mutex);
ah->coverage_class = coverage_class;
+
+ ath9k_ps_wakeup(sc);
ath9k_hw_init_global_settings(ah);
+ ath9k_ps_restore(sc);
+
mutex_unlock(&sc->mutex);
}
mutex_lock(&sc->mutex);
cancel_delayed_work_sync(&sc->tx_complete_work);
+ if (ah->ah_flags & AH_UNPLUGGED) {
+ ath_dbg(common, ATH_DBG_ANY, "Device has been unplugged!\n");
+ mutex_unlock(&sc->mutex);
+ return;
+ }
+
if (sc->sc_flags & SC_OP_INVALID) {
ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
mutex_unlock(&sc->mutex);
static void ath_rx_edma_cleanup(struct ath_softc *sc)
{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
struct ath_buf *bf;
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP);
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP);
list_for_each_entry(bf, &sc->rx.rxbuf, list) {
- if (bf->bf_mpdu)
+ if (bf->bf_mpdu) {
+ dma_unmap_single(sc->dev, bf->bf_buf_addr,
+ common->rx_bufsize,
+ DMA_BIDIRECTIONAL);
dev_kfree_skb_any(bf->bf_mpdu);
+ bf->bf_buf_addr = 0;
+ bf->bf_mpdu = NULL;
+ }
}
INIT_LIST_HEAD(&sc->rx.rxbuf);
* the high througput speed in 802.11n networks.
*/
- if (!is_main_vif(ar, vif))
+ if (!is_main_vif(ar, vif)) {
+ mutex_lock(&ar->mutex);
goto err_softw;
+ }
/*
* While the hardware supports *catch-all* key, for offloading
u32 cmd, beacon0_valid, beacon1_valid;
if (!b43_is_mode(wl, NL80211_IFTYPE_AP) &&
- !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
+ !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) &&
+ !b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
return;
/* This is the bottom half of the asynchronous beacon update. */
/* Called by register_netdev() */
static int ipw2100_net_init(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = libipw_priv(dev);
+
+ return ipw2100_up(priv, 1);
+}
+
+static int ipw2100_wdev_init(struct net_device *dev)
{
struct ipw2100_priv *priv = libipw_priv(dev);
const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
struct wireless_dev *wdev = &priv->ieee->wdev;
- int ret;
int i;
- ret = ipw2100_up(priv, 1);
- if (ret)
- return ret;
-
memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
/* fill-out priv->ieee->bg_band */
"Error calling register_netdev.\n");
goto fail;
}
+ registered = 1;
+
+ err = ipw2100_wdev_init(dev);
+ if (err)
+ goto fail;
mutex_lock(&priv->action_mutex);
- registered = 1;
IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
fail_unlock:
mutex_unlock(&priv->action_mutex);
-
+ wiphy_unregister(priv->ieee->wdev.wiphy);
+ kfree(priv->ieee->bg_band.channels);
fail:
if (dev) {
if (registered)
/* Called by register_netdev() */
static int ipw_net_init(struct net_device *dev)
+{
+ int rc = 0;
+ struct ipw_priv *priv = libipw_priv(dev);
+
+ mutex_lock(&priv->mutex);
+ if (ipw_up(priv))
+ rc = -EIO;
+ mutex_unlock(&priv->mutex);
+
+ return rc;
+}
+
+static int ipw_wdev_init(struct net_device *dev)
{
int i, rc = 0;
struct ipw_priv *priv = libipw_priv(dev);
const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
struct wireless_dev *wdev = &priv->ieee->wdev;
- mutex_lock(&priv->mutex);
-
- if (ipw_up(priv)) {
- rc = -EIO;
- goto out;
- }
memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
/* With that information in place, we can now register the wiphy... */
- if (wiphy_register(wdev->wiphy)) {
+ if (wiphy_register(wdev->wiphy))
rc = -EIO;
- goto out;
- }
-
out:
- mutex_unlock(&priv->mutex);
return rc;
}
goto out_remove_sysfs;
}
+ err = ipw_wdev_init(net_dev);
+ if (err) {
+ IPW_ERROR("failed to register wireless device\n");
+ goto out_unregister_netdev;
+ }
+
#ifdef CONFIG_IPW2200_PROMISCUOUS
if (rtap_iface) {
err = ipw_prom_alloc(priv);
if (err) {
IPW_ERROR("Failed to register promiscuous network "
"device (error %d).\n", err);
- unregister_netdev(priv->net_dev);
- goto out_remove_sysfs;
+ wiphy_unregister(priv->ieee->wdev.wiphy);
+ kfree(priv->ieee->a_band.channels);
+ kfree(priv->ieee->bg_band.channels);
+ goto out_unregister_netdev;
}
}
#endif
return 0;
+ out_unregister_netdev:
+ unregister_netdev(priv->net_dev);
out_remove_sysfs:
sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group);
out_release_irq:
out:
- rs_sta->last_txrate_idx = index;
- if (sband->band == IEEE80211_BAND_5GHZ)
- info->control.rates[0].idx = rs_sta->last_txrate_idx -
- IWL_FIRST_OFDM_RATE;
- else
+ if (sband->band == IEEE80211_BAND_5GHZ) {
+ if (WARN_ON_ONCE(index < IWL_FIRST_OFDM_RATE))
+ index = IWL_FIRST_OFDM_RATE;
+ rs_sta->last_txrate_idx = index;
+ info->control.rates[0].idx = index - IWL_FIRST_OFDM_RATE;
+ } else {
+ rs_sta->last_txrate_idx = index;
info->control.rates[0].idx = rs_sta->last_txrate_idx;
+ }
IWL_DEBUG_RATE(priv, "leave: %d\n", index);
}
&priv->contexts[IWL_RXON_CTX_BSS]);
#endif
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
/* Keep the restart process from trying to send host
* commands by clearing the INIT status bit */
/* Set the FW error flag -- cleared on iwl_down */
set_bit(STATUS_FW_ERROR, &priv->status);
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
/*
* Keep the restart process from trying to send host
* commands by clearing the INIT status bit
goto out;
}
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+ ret = wait_event_timeout(priv->wait_command_queue,
!test_bit(STATUS_HCMD_ACTIVE, &priv->status),
HOST_COMPLETE_TIMEOUT);
if (!ret) {
cmd = txq->cmd[cmd_index];
meta = &txq->meta[cmd_index];
+ txq->time_stamp = jiffies;
+
pci_unmap_single(priv->pci_dev,
dma_unmap_addr(meta, mapping),
dma_unmap_len(meta, len),
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n",
iwl_legacy_get_cmd_string(cmd->hdr.cmd));
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
/* Mark as unmapped */
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
test_bit(STATUS_RF_KILL_HW, &priv->status));
else
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
/**
iwl3945_reg_txpower_periodic(priv);
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
return;
iwl_legacy_clear_driver_stations(priv);
/* Unblock any waiting calls */
- wake_up_interruptible_all(&priv->wait_command_queue);
+ wake_up_all(&priv->wait_command_queue);
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
/* Wait for START_ALIVE from ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+ ret = wait_event_timeout(priv->wait_command_queue,
test_bit(STATUS_READY, &priv->status),
UCODE_READY_TIMEOUT);
if (!ret) {
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
test_bit(STATUS_RF_KILL_HW, &priv->status));
else
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
/**
handled |= CSR_INT_BIT_FH_TX;
/* Wake up uCode load routine, now that load is complete */
priv->ucode_write_complete = 1;
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
if (inta & ~handled) {
iwl4965_rf_kill_ct_config(priv);
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
iwl_legacy_power_update_mode(priv, true);
IWL_DEBUG_INFO(priv, "Updated power mode\n");
iwl_legacy_clear_driver_stations(priv);
/* Unblock any waiting calls */
- wake_up_interruptible_all(&priv->wait_command_queue);
+ wake_up_all(&priv->wait_command_queue);
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+ ret = wait_event_timeout(priv->wait_command_queue,
test_bit(STATUS_READY, &priv->status),
UCODE_READY_TIMEOUT);
if (!ret) {
memset(&cmd, 0, sizeof(cmd));
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
- memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(offset_calib));
+ memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib));
if (!(cmd.radio_sensor_offset))
cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+ /*
+ * Including the following line will crash some AP's. This
+ * workaround removes the stimulus which causes the crash until
+ * the AP software can be fixed.
hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+ */
hw->flags |= IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
return err;
}
-static void iwl_pci_down(struct iwl_bus *bus)
-{
- struct iwl_pci_bus *pci_bus = (struct iwl_pci_bus *) bus->bus_specific;
-
- pci_disable_msi(pci_bus->pci_dev);
- pci_iounmap(pci_bus->pci_dev, pci_bus->hw_base);
- pci_release_regions(pci_bus->pci_dev);
- pci_disable_device(pci_bus->pci_dev);
- pci_set_drvdata(pci_bus->pci_dev, NULL);
-
- kfree(bus);
-}
-
static void __devexit iwl_pci_remove(struct pci_dev *pdev)
{
struct iwl_priv *priv = pci_get_drvdata(pdev);
- void *bus_specific = priv->bus->bus_specific;
+ struct iwl_bus *bus = priv->bus;
+ struct iwl_pci_bus *pci_bus = IWL_BUS_GET_PCI_BUS(bus);
+ struct pci_dev *pci_dev = IWL_BUS_GET_PCI_DEV(bus);
iwl_remove(priv);
- iwl_pci_down(bus_specific);
+ pci_disable_msi(pci_dev);
+ pci_iounmap(pci_dev, pci_bus->hw_base);
+ pci_release_regions(pci_dev);
+ pci_disable_device(pci_dev);
+ pci_set_drvdata(pci_dev, NULL);
+
+ kfree(bus);
}
#ifdef CONFIG_PM
mutex_lock(&priv->mutex);
- if (test_bit(STATUS_SCANNING, &priv->status) &&
- priv->scan_type != IWL_SCAN_NORMAL) {
- IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
- ret = -EAGAIN;
- goto out_unlock;
- }
-
- /* mac80211 will only ask for one band at a time */
- priv->scan_request = req;
- priv->scan_vif = vif;
-
/*
* If an internal scan is in progress, just set
* up the scan_request as per above.
*/
if (priv->scan_type != IWL_SCAN_NORMAL) {
- IWL_DEBUG_SCAN(priv, "SCAN request during internal scan\n");
+ IWL_DEBUG_SCAN(priv,
+ "SCAN request during internal scan - defer\n");
+ priv->scan_request = req;
+ priv->scan_vif = vif;
ret = 0;
- } else
+ } else {
+ priv->scan_request = req;
+ priv->scan_vif = vif;
+ /*
+ * mac80211 will only ask for one band at a time
+ * so using channels[0] here is ok
+ */
ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL,
req->channels[0]->band);
+ if (ret) {
+ priv->scan_request = NULL;
+ priv->scan_vif = NULL;
+ }
+ }
IWL_DEBUG_MAC80211(priv, "leave\n");
-out_unlock:
mutex_unlock(&priv->mutex);
return ret;
cmd = txq->cmd[cmd_index];
meta = &txq->meta[cmd_index];
+ txq->time_stamp = jiffies;
+
iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], DMA_BIDIRECTIONAL);
/* Input error checking is done when commands are added to queue. */
rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®);
/* Apparently the data is read from end to start */
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3,
- (u32 *)&rt2x00dev->eeprom[i]);
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2,
- (u32 *)&rt2x00dev->eeprom[i + 2]);
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1,
- (u32 *)&rt2x00dev->eeprom[i + 4]);
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0,
- (u32 *)&rt2x00dev->eeprom[i + 6]);
+ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, ®);
+ /* The returned value is in CPU order, but eeprom is le */
+ rt2x00dev->eeprom[i] = cpu_to_le32(reg);
+ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, ®);
+ *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg);
+ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, ®);
+ *(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg);
+ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, ®);
+ *(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg);
mutex_unlock(&rt2x00dev->csr_mutex);
}
return -ENODEV;
}
- if (!rt2x00_rf(rt2x00dev, RF2820) &&
- !rt2x00_rf(rt2x00dev, RF2850) &&
- !rt2x00_rf(rt2x00dev, RF2720) &&
- !rt2x00_rf(rt2x00dev, RF2750) &&
- !rt2x00_rf(rt2x00dev, RF3020) &&
- !rt2x00_rf(rt2x00dev, RF2020) &&
- !rt2x00_rf(rt2x00dev, RF3021) &&
- !rt2x00_rf(rt2x00dev, RF3022) &&
- !rt2x00_rf(rt2x00dev, RF3052) &&
- !rt2x00_rf(rt2x00dev, RF3320) &&
- !rt2x00_rf(rt2x00dev, RF5370) &&
- !rt2x00_rf(rt2x00dev, RF5390)) {
- ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ switch (rt2x00dev->chip.rf) {
+ case RF2820:
+ case RF2850:
+ case RF2720:
+ case RF2750:
+ case RF3020:
+ case RF2020:
+ case RF3021:
+ case RF3022:
+ case RF3052:
+ case RF3320:
+ case RF5370:
+ case RF5390:
+ break;
+ default:
+ ERROR(rt2x00dev, "Invalid RF chipset 0x%x detected.\n",
+ rt2x00dev->chip.rf);
return -ENODEV;
}
int wcid, ack, pid;
int tx_wcid, tx_ack, tx_pid;
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+ !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) {
+ WARNING(entry->queue->rt2x00dev,
+ "Data pending for entry %u in queue %u\n",
+ entry->entry_idx, entry->queue->qid);
+ cond_resched();
+ return false;
+ }
+
wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
if (rt2800usb_txdone_entry_check(entry, reg))
break;
+ entry = NULL;
}
- if (!entry || rt2x00queue_empty(queue))
- break;
-
- rt2800_txdone_entry(entry, reg);
+ if (entry)
+ rt2800_txdone_entry(entry, reg);
}
}
while (!rt2x00queue_empty(queue)) {
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
- if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+ !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
break;
+
if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
else if (rt2x00queue_status_timeout(entry))
struct queue_entry *entry = (struct queue_entry *)urb->context;
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
-
- if (rt2x00dev->ops->lib->tx_dma_done)
- rt2x00dev->ops->lib->tx_dma_done(entry);
-
- /*
- * Report the frame as DMA done
- */
- rt2x00lib_dmadone(entry);
-
/*
* Check if the frame was correctly uploaded
*/
if (urb->status)
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
+ /*
+ * Report the frame as DMA done
+ */
+ rt2x00lib_dmadone(entry);
+ if (rt2x00dev->ops->lib->tx_dma_done)
+ rt2x00dev->ops->lib->tx_dma_done(entry);
/*
* Schedule the delayed work for reading the TX status
* from the device.
{
struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
struct rt2x00_dev *rt2x00dev = hw->priv;
- int retval;
-
- retval = rt2x00lib_suspend(rt2x00dev, state);
- if (retval)
- return retval;
- /*
- * Decrease usbdev refcount.
- */
- usb_put_dev(interface_to_usbdev(usb_intf));
-
- return 0;
+ return rt2x00lib_suspend(rt2x00dev, state);
}
EXPORT_SYMBOL_GPL(rt2x00usb_suspend);
struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
struct rt2x00_dev *rt2x00dev = hw->priv;
- usb_get_dev(interface_to_usbdev(usb_intf));
-
return rt2x00lib_resume(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00usb_resume);
mac->link_state = MAC80211_NOLINK;
memset(mac->bssid, 0, 6);
+
+ /* reset sec info */
+ rtl_cam_reset_sec_info(hw);
+
+ rtl_cam_reset_all_entry(hw);
mac->vendor = PEER_UNKNOWN;
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
*or clear all entry here.
*/
rtl_cam_delete_one_entry(hw, mac_addr, key_idx);
+
+ rtl_cam_reset_sec_info(hw);
+
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
(tcb_desc->rts_use_shortpreamble ? 1 : 0)
: (tcb_desc->rts_use_shortgi ? 1 : 0)));
if (mac->bw_40) {
- if (tcb_desc->packet_bw) {
+ if (rate_flag & IEEE80211_TX_RC_DUP_DATA) {
SET_TX_DESC_DATA_BW(txdesc, 1);
SET_TX_DESC_DATA_SC(txdesc, 3);
+ } else if(rate_flag & IEEE80211_TX_RC_40_MHZ_WIDTH){
+ SET_TX_DESC_DATA_BW(txdesc, 1);
+ SET_TX_DESC_DATA_SC(txdesc, mac->cur_40_prime_sc);
} else {
SET_TX_DESC_DATA_BW(txdesc, 0);
- if (rate_flag & IEEE80211_TX_RC_DUP_DATA)
- SET_TX_DESC_DATA_SC(txdesc,
- mac->cur_40_prime_sc);
- }
+ SET_TX_DESC_DATA_SC(txdesc, 0);
+ }
} else {
SET_TX_DESC_DATA_BW(txdesc, 0);
SET_TX_DESC_DATA_SC(txdesc, 0);
u8 tid = 0;
u16 seq_number = 0;
+ memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
if (ieee80211_is_auth(fc)) {
RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, ("MAC80211_LINKING\n"));
rtl_ips_nic_on(hw);
auth->sleep_auth = sleep_auth;
ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
- if (ret < 0)
- return ret;
out:
kfree(auth);
ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD,
detection, sizeof(*detection));
- if (ret < 0) {
+ if (ret < 0)
wl1271_warning("failed to set cca threshold: %d", ret);
- return ret;
- }
out:
kfree(detection);
wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_AP);
wl->hw->wiphy->max_scan_ssids = 1;
+ wl->hw->wiphy->max_sched_scan_ssids = 1;
/*
* Maximum length of elements in scanning probe request templates
* should be the maximum length possible for a template, without
/* If enabled, tell runtime PM not to power off the card */
if (pm_runtime_enabled(&func->dev)) {
ret = pm_runtime_get_sync(&func->dev);
- if (ret)
+ if (ret < 0)
goto out;
} else {
/* Runtime PM is disabled: power up the card manually */
WL1271_TM_CMD_TEST,
WL1271_TM_CMD_INTERROGATE,
WL1271_TM_CMD_CONFIGURE,
- WL1271_TM_CMD_NVS_PUSH,
WL1271_TM_CMD_SET_PLT_MODE,
WL1271_TM_CMD_RECOVER,
if (ret < 0) {
wl1271_warning("testmode cmd interrogate failed: %d", ret);
+ kfree(cmd);
return ret;
}
skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, sizeof(*cmd));
- if (!skb)
+ if (!skb) {
+ kfree(cmd);
return -ENOMEM;
+ }
NLA_PUT(skb, WL1271_TM_ATTR_DATA, sizeof(*cmd), cmd);
return 0;
}
-static int wl1271_tm_cmd_nvs_push(struct wl1271 *wl, struct nlattr *tb[])
-{
- int ret = 0;
- size_t len;
- void *buf;
-
- wl1271_debug(DEBUG_TESTMODE, "testmode cmd nvs push");
-
- if (!tb[WL1271_TM_ATTR_DATA])
- return -EINVAL;
-
- buf = nla_data(tb[WL1271_TM_ATTR_DATA]);
- len = nla_len(tb[WL1271_TM_ATTR_DATA]);
-
- mutex_lock(&wl->mutex);
-
- kfree(wl->nvs);
-
- if ((wl->chip.id == CHIP_ID_1283_PG20) &&
- (len != sizeof(struct wl128x_nvs_file)))
- return -EINVAL;
- else if (len != sizeof(struct wl1271_nvs_file))
- return -EINVAL;
-
- wl->nvs = kzalloc(len, GFP_KERNEL);
- if (!wl->nvs) {
- wl1271_error("could not allocate memory for the nvs file");
- ret = -ENOMEM;
- goto out;
- }
-
- memcpy(wl->nvs, buf, len);
- wl->nvs_len = len;
-
- wl1271_debug(DEBUG_TESTMODE, "testmode pushed nvs");
-
-out:
- mutex_unlock(&wl->mutex);
-
- return ret;
-}
-
static int wl1271_tm_cmd_set_plt_mode(struct wl1271 *wl, struct nlattr *tb[])
{
u32 val;
return wl1271_tm_cmd_interrogate(wl, tb);
case WL1271_TM_CMD_CONFIGURE:
return wl1271_tm_cmd_configure(wl, tb);
- case WL1271_TM_CMD_NVS_PUSH:
- return wl1271_tm_cmd_nvs_push(wl, tb);
case WL1271_TM_CMD_SET_PLT_MODE:
return wl1271_tm_cmd_set_plt_mode(wl, tb);
case WL1271_TM_CMD_RECOVER:
xenvif_get(vif);
rtnl_lock();
- if (netif_running(vif->dev))
- xenvif_up(vif);
if (!vif->can_sg && vif->dev->mtu > ETH_DATA_LEN)
dev_set_mtu(vif->dev, ETH_DATA_LEN);
netdev_update_features(vif->dev);
netif_carrier_on(vif->dev);
+ if (netif_running(vif->dev))
+ xenvif_up(vif);
rtnl_unlock();
return 0;
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
return;
- pcie_bus_configure_settings(dev->bus, dev->bus->self->pcie_mpss);
+ if (dev->bus && dev->bus->self)
+ pcie_bus_configure_settings(dev->bus,
+ dev->bus->self->pcie_mpss);
memset(&hpp, 0, sizeof(hpp));
ret = pci_get_hp_params(dev, &hpp);
unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE;
unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
-enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PERFORMANCE;
+enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF;
/*
* The default CLS is used if arch didn't set CLS explicitly and not
pci_hotplug_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "hpmemsize=", 10)) {
pci_hotplug_mem_size = memparse(str + 10, &str);
+ } else if (!strncmp(str, "pcie_bus_tune_off", 17)) {
+ pcie_bus_config = PCIE_BUS_TUNE_OFF;
} else if (!strncmp(str, "pcie_bus_safe", 13)) {
pcie_bus_config = PCIE_BUS_SAFE;
} else if (!strncmp(str, "pcie_bus_perf", 13)) {
pcie_bus_config = PCIE_BUS_PERFORMANCE;
+ } else if (!strncmp(str, "pcie_bus_peer2peer", 18)) {
+ pcie_bus_config = PCIE_BUS_PEER2PEER;
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
* will occur as normal.
*/
if (dev->is_hotplug_bridge && (!list_is_singular(&dev->bus->devices) ||
- dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT))
+ (dev->bus->self &&
+ dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT)))
*smpss = 0;
if (*smpss > dev->pcie_mpss)
static void pcie_write_mrrs(struct pci_dev *dev, int mps)
{
- int rc, mrrs;
+ int rc, mrrs, dev_mpss;
- if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
- int dev_mpss = 128 << dev->pcie_mpss;
+ /* In the "safe" case, do not configure the MRRS. There appear to be
+ * issues with setting MRRS to 0 on a number of devices.
+ */
- /* For Max performance, the MRRS must be set to the largest
- * supported value. However, it cannot be configured larger
- * than the MPS the device or the bus can support. This assumes
- * that the largest MRRS available on the device cannot be
- * smaller than the device MPSS.
- */
- mrrs = mps < dev_mpss ? mps : dev_mpss;
- } else
- /* In the "safe" case, configure the MRRS for fairness on the
- * bus by making all devices have the same size
- */
- mrrs = mps;
+ if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
+ return;
+ dev_mpss = 128 << dev->pcie_mpss;
+
+ /* For Max performance, the MRRS must be set to the largest supported
+ * value. However, it cannot be configured larger than the MPS the
+ * device or the bus can support. This assumes that the largest MRRS
+ * available on the device cannot be smaller than the device MPSS.
+ */
+ mrrs = min(mps, dev_mpss);
/* MRRS is a R/W register. Invalid values can be written, but a
- * subsiquent read will verify if the value is acceptable or not.
+ * subsequent read will verify if the value is acceptable or not.
* If the MRRS value provided is not acceptable (e.g., too large),
* shrink the value until it is acceptable to the HW.
*/
while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
+ dev_warn(&dev->dev, "Attempting to modify the PCI-E MRRS value"
+ " to %d. If any issues are encountered, please try "
+ "running with pci=pcie_bus_safe\n", mrrs);
rc = pcie_set_readrq(dev, mrrs);
if (rc)
- dev_err(&dev->dev, "Failed attempting to set the MRRS\n");
+ dev_err(&dev->dev,
+ "Failed attempting to set the MRRS\n");
mrrs /= 2;
}
if (!pci_is_pcie(dev))
return 0;
- dev_info(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
+ dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
pcie_write_mps(dev, mps);
pcie_write_mrrs(dev, mps);
- dev_info(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
+ dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
return 0;
*/
void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss)
{
- u8 smpss = mpss;
+ u8 smpss;
- if (!bus->self)
+ if (!pci_is_pcie(bus->self))
return;
- if (!pci_is_pcie(bus->self))
+ if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
return;
+ /* FIXME - Peer to peer DMA is possible, though the endpoint would need
+ * to be aware to the MPS of the destination. To work around this,
+ * simply force the MPS of the entire system to the smallest possible.
+ */
+ if (pcie_bus_config == PCIE_BUS_PEER2PEER)
+ smpss = 0;
+
if (pcie_bus_config == PCIE_BUS_SAFE) {
+ smpss = mpss;
+
pcie_find_smpss(bus->self, &smpss);
pci_walk_bus(bus, pcie_find_smpss, &smpss);
}
static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
- __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG |
+ __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG +
((state->flags & SS_RESET) ?
BALLOON3_FPGA_SETnCLR : 0));
return 0;
#include <asm/mach-types.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/vpac270.h>
#include "soc_common.h"
*/
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
*/
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/s3c_adc_battery.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <plat/adc.h>
rdev->dev.dma_mask = &rdev->dma_mask;
rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- if ((rdev->pef & RIO_PEF_INB_DOORBELL) &&
- (rdev->dst_ops & RIO_DST_OPS_DOORBELL))
+ if (rdev->dst_ops & RIO_DST_OPS_DOORBELL)
rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
0, 0xffff);
*/
struct ep93xx_rtc {
void __iomem *mmio_base;
+ struct rtc_device *rtc;
};
static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
{
struct ep93xx_rtc *ep93xx_rtc;
struct resource *res;
- struct rtc_device *rtc;
int err;
ep93xx_rtc = devm_kzalloc(&pdev->dev, sizeof(*ep93xx_rtc), GFP_KERNEL);
return -ENXIO;
pdev->dev.platform_data = ep93xx_rtc;
- platform_set_drvdata(pdev, rtc);
+ platform_set_drvdata(pdev, ep93xx_rtc);
- rtc = rtc_device_register(pdev->name,
+ ep93xx_rtc->rtc = rtc_device_register(pdev->name,
&pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- err = PTR_ERR(rtc);
+ if (IS_ERR(ep93xx_rtc->rtc)) {
+ err = PTR_ERR(ep93xx_rtc->rtc);
goto exit;
}
return 0;
fail:
- rtc_device_unregister(rtc);
+ rtc_device_unregister(ep93xx_rtc->rtc);
exit:
platform_set_drvdata(pdev, NULL);
pdev->dev.platform_data = NULL;
static int __exit ep93xx_rtc_remove(struct platform_device *pdev)
{
- struct rtc_device *rtc = platform_get_drvdata(pdev);
+ struct ep93xx_rtc *ep93xx_rtc = platform_get_drvdata(pdev);
sysfs_remove_group(&pdev->dev.kobj, &ep93xx_rtc_sysfs_files);
platform_set_drvdata(pdev, NULL);
- rtc_device_unregister(rtc);
+ rtc_device_unregister(ep93xx_rtc->rtc);
pdev->dev.platform_data = NULL;
return 0;
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
+#include <linux/sched.h>
#include <linux/workqueue.h>
/* DryIce Register Definitions */
time -= tm->tm_hour * 3600;
tm->tm_min = time / 60;
tm->tm_sec = time - tm->tm_min * 60;
+
+ tm->tm_isdst = 0;
}
EXPORT_SYMBOL(rtc_time_to_tm);
static DEFINE_SPINLOCK(s3c_rtc_pie_lock);
+static void s3c_rtc_alarm_clk_enable(bool enable)
+{
+ static DEFINE_SPINLOCK(s3c_rtc_alarm_clk_lock);
+ static bool alarm_clk_enabled;
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&s3c_rtc_alarm_clk_lock, irq_flags);
+ if (enable) {
+ if (!alarm_clk_enabled) {
+ clk_enable(rtc_clk);
+ alarm_clk_enabled = true;
+ }
+ } else {
+ if (alarm_clk_enabled) {
+ clk_disable(rtc_clk);
+ alarm_clk_enabled = false;
+ }
+ }
+ spin_unlock_irqrestore(&s3c_rtc_alarm_clk_lock, irq_flags);
+}
+
/* IRQ Handlers */
static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
writeb(S3C2410_INTP_ALM, s3c_rtc_base + S3C2410_INTP);
clk_disable(rtc_clk);
+
+ s3c_rtc_alarm_clk_enable(false);
+
return IRQ_HANDLED;
}
writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
clk_disable(rtc_clk);
+ s3c_rtc_alarm_clk_enable(enabled);
+
return 0;
}
goto retry_get_time;
}
- pr_debug("read time %04d.%02d.%02d %02d:%02d:%02d\n",
- 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
- rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
-
rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
rtc_tm->tm_year += 100;
+
+ pr_debug("read time %04d.%02d.%02d %02d:%02d:%02d\n",
+ 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
+ rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
+
rtc_tm->tm_mon -= 1;
clk_disable(rtc_clk);
clk_enable(rtc_clk);
pr_debug("s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
alrm->enabled,
- 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+ 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
-
alrm_en = readb(base + S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN;
writeb(0x00, base + S3C2410_RTCALM);
return 0;
}
-static int s3c_rtc_open(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
- int ret;
-
- ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq,
- IRQF_DISABLED, "s3c2410-rtc alarm", rtc_dev);
-
- if (ret) {
- dev_err(dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret);
- return ret;
- }
-
- ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq,
- IRQF_DISABLED, "s3c2410-rtc tick", rtc_dev);
-
- if (ret) {
- dev_err(dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret);
- goto tick_err;
- }
-
- return ret;
-
- tick_err:
- free_irq(s3c_rtc_alarmno, rtc_dev);
- return ret;
-}
-
-static void s3c_rtc_release(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
-
- /* do not clear AIE here, it may be needed for wake */
-
- free_irq(s3c_rtc_alarmno, rtc_dev);
- free_irq(s3c_rtc_tickno, rtc_dev);
-}
-
static const struct rtc_class_ops s3c_rtcops = {
- .open = s3c_rtc_open,
- .release = s3c_rtc_release,
.read_time = s3c_rtc_gettime,
.set_time = s3c_rtc_settime,
.read_alarm = s3c_rtc_getalarm,
{
struct rtc_device *rtc = platform_get_drvdata(dev);
+ free_irq(s3c_rtc_alarmno, rtc);
+ free_irq(s3c_rtc_tickno, rtc);
+
platform_set_drvdata(dev, NULL);
rtc_device_unregister(rtc);
s3c_rtc_setfreq(&pdev->dev, 1);
+ ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq,
+ IRQF_DISABLED, "s3c2410-rtc alarm", rtc);
+ if (ret) {
+ dev_err(&pdev->dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret);
+ goto err_alarm_irq;
+ }
+
+ ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq,
+ IRQF_DISABLED, "s3c2410-rtc tick", rtc);
+ if (ret) {
+ dev_err(&pdev->dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret);
+ free_irq(s3c_rtc_alarmno, rtc);
+ goto err_tick_irq;
+ }
+
clk_disable(rtc_clk);
return 0;
+ err_tick_irq:
+ free_irq(s3c_rtc_alarmno, rtc);
+
+ err_alarm_irq:
+ platform_set_drvdata(pdev, NULL);
+ rtc_device_unregister(rtc);
+
err_nortc:
s3c_rtc_enable(pdev, 0);
clk_disable(rtc_clk);
int res;
u8 rd_reg;
-#ifdef CONFIG_LOCKDEP
- /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
- * we don't want and can't tolerate. Although it might be
- * friendlier not to borrow this thread context...
- */
- local_irq_enable();
-#endif
-
res = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
if (res)
goto out;
static int __devinit twl_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
- int ret = 0;
+ int ret = -EINVAL;
int irq = platform_get_irq(pdev, 0);
u8 rd_reg;
if (irq <= 0)
- return -EINVAL;
-
- rtc = rtc_device_register(pdev->name,
- &pdev->dev, &twl_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- ret = PTR_ERR(rtc);
- dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
- PTR_ERR(rtc));
- goto out0;
-
- }
-
- platform_set_drvdata(pdev, rtc);
+ goto out1;
ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
if (ret < 0)
if (ret < 0)
goto out1;
- ret = request_irq(irq, twl_rtc_interrupt,
- IRQF_TRIGGER_RISING,
- dev_name(&rtc->dev), rtc);
- if (ret < 0) {
- dev_err(&pdev->dev, "IRQ is not free.\n");
- goto out1;
- }
-
if (twl_class_is_6030()) {
twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
REG_INT_MSK_LINE_A);
/* Check RTC module status, Enable if it is off */
ret = twl_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
if (ret < 0)
- goto out2;
+ goto out1;
if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
dev_info(&pdev->dev, "Enabling TWL-RTC.\n");
rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
ret = twl_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
if (ret < 0)
- goto out2;
+ goto out1;
}
/* init cached IRQ enable bits */
ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
if (ret < 0)
+ goto out1;
+
+ rtc = rtc_device_register(pdev->name,
+ &pdev->dev, &twl_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ ret = PTR_ERR(rtc);
+ dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+ PTR_ERR(rtc));
+ goto out1;
+ }
+
+ ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
+ IRQF_TRIGGER_RISING,
+ dev_name(&rtc->dev), rtc);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "IRQ is not free.\n");
goto out2;
+ }
- return ret;
+ platform_set_drvdata(pdev, rtc);
+ return 0;
out2:
- free_irq(irq, rtc);
-out1:
rtc_device_unregister(rtc);
-out0:
+out1:
return ret;
}
static int dasd_ioctl_read_profile(struct dasd_block *block, void __user *argp)
{
struct dasd_profile_info_t *data;
+ int rc = 0;
data = kmalloc(sizeof(*data), GFP_KERNEL);
if (!data)
spin_unlock_bh(&block->profile.lock);
} else {
spin_unlock_bh(&block->profile.lock);
- return -EIO;
+ rc = -EIO;
+ goto out;
}
if (copy_to_user(argp, data, sizeof(*data)))
- return -EFAULT;
- return 0;
+ rc = -EFAULT;
+out:
+ kfree(data);
+ return rc;
}
#else
static int dasd_ioctl_reset_profile(struct dasd_block *block)
switch (sccb->header.response_code) {
case 0x0020:
set_bit(id, sclp_storage_ids);
- for (i = 0; i < sccb->assigned; i++)
- sclp_unassign_storage(sccb->entries[i] >> 16);
+ for (i = 0; i < sccb->assigned; i++) {
+ if (sccb->entries[i])
+ sclp_unassign_storage(sccb->entries[i] >> 16);
+ }
break;
default:
rc = -EIO;
static int console_subchannel_in_use;
/*
- * Use tpi to get a pending interrupt, call the interrupt handler and
- * return a pointer to the subchannel structure.
+ * Use cio_tpi to get a pending interrupt and call the interrupt handler.
+ * Return non-zero if an interrupt was processed, zero otherwise.
*/
static int cio_tpi(void)
{
tpi_info = (struct tpi_info *)&S390_lowcore.subchannel_id;
if (tpi(NULL) != 1)
return 0;
+ if (tpi_info->adapter_IO) {
+ do_adapter_IO(tpi_info->isc);
+ return 1;
+ }
irb = (struct irb *)&S390_lowcore.irb;
/* Store interrupt response block to lowcore. */
if (tsch(tpi_info->schid, irb) != 0)
switch (retval) {
case SCSI_MLQUEUE_HOST_BUSY:
twa_free_request_id(tw_dev, request_id);
+ twa_unmap_scsi_data(tw_dev, request_id);
break;
case 1:
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
+ twa_unmap_scsi_data(tw_dev, request_id);
SCpnt->result = (DID_ERROR << 16);
done(SCpnt);
retval = 0;
# (temporary): known alpha quality driver
depends on EXPERIMENTAL
select SCSI_SAS_LIBSAS
+ select SCSI_SAS_HOST_SMP
---help---
This driver supports the 6Gb/s SAS capabilities of the storage
control unit found in the Intel(R) C600 series chipset.
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/
-obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx/
+obj-$(CONFIG_SCSI_QLA_ISCSI) += libiscsi.o qla4xxx/
obj-$(CONFIG_SCSI_LPFC) += lpfc/
obj-$(CONFIG_SCSI_BFA_FC) += bfa/
obj-$(CONFIG_SCSI_PAS16) += pas16.o
kfree(aac->queues);
aac->queues = NULL;
free_irq(aac->pdev->irq, aac);
+ if (aac->msi)
+ pci_disable_msi(aac->pdev);
kfree(aac->fsa_dev);
aac->fsa_dev = NULL;
quirks = aac_get_driver_ident(index)->quirks;
nopout_wqe->itt = ((u16)task->itt |
(ISCSI_TASK_TYPE_MPATH <<
ISCSI_TMF_REQUEST_TYPE_SHIFT));
- nopout_wqe->ttt = nopout_hdr->ttt;
+ nopout_wqe->ttt = be32_to_cpu(nopout_hdr->ttt);
nopout_wqe->flags = 0;
if (!unsol)
nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
struct t3cdev *t3dev = (struct t3cdev *)csk->cdev->lldev;
if (csk->l2t) {
- l2t_release(L2DATA(t3dev), csk->l2t);
+ l2t_release(t3dev, csk->l2t);
csk->l2t = NULL;
cxgbi_sock_put(csk);
}
u8 flogi_maddr[ETH_ALEN];
const struct net_device_ops *ops;
+ rtnl_lock();
+
/*
* Don't listen for Ethernet packets anymore.
* synchronize_net() ensures that the packet handlers are not running
" specific feature for LLD.\n");
}
+ rtnl_unlock();
+
/* Release the self-reference taken during fcoe_interface_create() */
fcoe_interface_put(fcoe);
}
fcoe_if_destroy(port->lport);
/* Do not tear down the fcoe interface for NPIV port */
- if (!npiv) {
- rtnl_lock();
+ if (!npiv)
fcoe_interface_cleanup(fcoe);
- rtnl_unlock();
- }
mutex_unlock(&fcoe_config_mutex);
}
printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
netdev->name);
rc = -EIO;
+ rtnl_unlock();
fcoe_interface_cleanup(fcoe);
- goto out_nodev;
+ goto out_nortnl;
}
/* Make this the "master" N_Port */
out_nodev:
rtnl_unlock();
+out_nortnl:
mutex_unlock(&fcoe_config_mutex);
return rc;
}
BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
removed[*nremoved] = h->dev[entry];
(*nremoved)++;
+
+ /*
+ * New physical devices won't have target/lun assigned yet
+ * so we need to preserve the values in the slot we are replacing.
+ */
+ if (new_entry->target == -1) {
+ new_entry->target = h->dev[entry]->target;
+ new_entry->lun = h->dev[entry]->lun;
+ }
+
h->dev[entry] = new_entry;
added[*nadded] = new_entry;
(*nadded)++;
}
static int hpsa_update_device_info(struct ctlr_info *h,
- unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device)
+ unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
+ unsigned char *is_OBDR_device)
{
-#define OBDR_TAPE_INQ_SIZE 49
+
+#define OBDR_SIG_OFFSET 43
+#define OBDR_TAPE_SIG "$DR-10"
+#define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1)
+#define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN)
+
unsigned char *inq_buff;
+ unsigned char *obdr_sig;
inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
if (!inq_buff)
else
this_device->raid_level = RAID_UNKNOWN;
+ if (is_OBDR_device) {
+ /* See if this is a One-Button-Disaster-Recovery device
+ * by looking for "$DR-10" at offset 43 in inquiry data.
+ */
+ obdr_sig = &inq_buff[OBDR_SIG_OFFSET];
+ *is_OBDR_device = (this_device->devtype == TYPE_ROM &&
+ strncmp(obdr_sig, OBDR_TAPE_SIG,
+ OBDR_SIG_LEN) == 0);
+ }
+
kfree(inq_buff);
return 0;
return 0;
}
- if (hpsa_update_device_info(h, scsi3addr, this_device))
+ if (hpsa_update_device_info(h, scsi3addr, this_device, NULL))
return 0;
(*nmsa2xxx_enclosures)++;
hpsa_set_bus_target_lun(this_device, bus, target, 0);
*/
struct ReportLUNdata *physdev_list = NULL;
struct ReportLUNdata *logdev_list = NULL;
- unsigned char *inq_buff = NULL;
u32 nphysicals = 0;
u32 nlogicals = 0;
u32 ndev_allocated = 0;
GFP_KERNEL);
physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
- inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
- if (!currentsd || !physdev_list || !logdev_list ||
- !inq_buff || !tmpdevice) {
+ if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) {
dev_err(&h->pdev->dev, "out of memory\n");
goto out;
}
/* adjust our table of devices */
nmsa2xxx_enclosures = 0;
for (i = 0; i < nphysicals + nlogicals + 1; i++) {
- u8 *lunaddrbytes;
+ u8 *lunaddrbytes, is_OBDR = 0;
/* Figure out where the LUN ID info is coming from */
lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
continue;
/* Get device type, vendor, model, device id */
- if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice))
+ if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
+ &is_OBDR))
continue; /* skip it if we can't talk to it. */
figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun,
tmpdevice);
hpsa_set_bus_target_lun(this_device, bus, target, lun);
switch (this_device->devtype) {
- case TYPE_ROM: {
+ case TYPE_ROM:
/* We don't *really* support actual CD-ROM devices,
* just "One Button Disaster Recovery" tape drive
* which temporarily pretends to be a CD-ROM drive.
* device by checking for "$DR-10" in bytes 43-48 of
* the inquiry data.
*/
- char obdr_sig[7];
-#define OBDR_TAPE_SIG "$DR-10"
- strncpy(obdr_sig, &inq_buff[43], 6);
- obdr_sig[6] = '\0';
- if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0)
- /* Not OBDR device, ignore it. */
- break;
- }
- ncurrent++;
+ if (is_OBDR)
+ ncurrent++;
break;
case TYPE_DISK:
if (i < nphysicals)
for (i = 0; i < ndev_allocated; i++)
kfree(currentsd[i]);
kfree(currentsd);
- kfree(inq_buff);
kfree(physdev_list);
kfree(logdev_list);
}
break;
case SCU_COMPLETION_TYPE_EVENT:
+ sci_controller_event_completion(ihost, ent);
+ break;
+
case SCU_COMPLETION_TYPE_NOTIFY: {
event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) <<
(SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT);
struct isci_request *request;
struct isci_request *next_request;
struct sas_task *task;
+ u16 active;
INIT_LIST_HEAD(&completed_request_list);
INIT_LIST_HEAD(&errored_request_list);
}
}
+ /* the coalesence timeout doubles at each encoding step, so
+ * update it based on the ilog2 value of the outstanding requests
+ */
+ active = isci_tci_active(ihost);
+ writel(SMU_ICC_GEN_VAL(NUMBER, active) |
+ SMU_ICC_GEN_VAL(TIMER, ISCI_COALESCE_BASE + ilog2(active)),
+ &ihost->smu_registers->interrupt_coalesce_control);
}
/**
struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
/* set the default interrupt coalescence number and timeout value. */
- sci_controller_set_interrupt_coalescence(ihost, 0x10, 250);
+ sci_controller_set_interrupt_coalescence(ihost, 0, 0);
}
static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm)
#define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1))
#define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1))
+/* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */
+#define ISCI_COALESCE_BASE 9
+
/* expander attached sata devices require 3 rnc slots */
static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
{
#include <linux/firmware.h>
#include <linux/efi.h>
#include <asm/string.h>
+#include <scsi/scsi_host.h>
#include "isci.h"
#include "task.h"
#include "probe_roms.h"
+#define MAJ 1
+#define MIN 0
+#define BUILD 0
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+ __stringify(BUILD)
+
+MODULE_VERSION(DRV_VERSION);
+
static struct scsi_transport_template *isci_transport_template;
static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = {
module_param(max_concurr_spinup, byte, 0);
MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
+static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
+}
+
+static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
+
+struct device_attribute *isci_host_attrs[] = {
+ &dev_attr_isci_id,
+ NULL
+};
+
static struct scsi_host_template isci_sht = {
.module = THIS_MODULE,
.slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
+ .shost_attrs = isci_host_attrs,
};
static struct sas_domain_function_template isci_transport_ops = {
return 0;
}
-static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
- struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
- struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
-}
-
-static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
-
static void isci_unregister(struct isci_host *isci_host)
{
struct Scsi_Host *shost;
return;
shost = isci_host->shost;
- device_remove_file(&shost->shost_dev, &dev_attr_isci_id);
sas_unregister_ha(&isci_host->sas_ha);
if (err)
goto err_shost_remove;
- err = device_create_file(&shost->shost_dev, &dev_attr_isci_id);
- if (err)
- goto err_unregister_ha;
-
return isci_host;
- err_unregister_ha:
- sas_unregister_ha(&(isci_host->sas_ha));
err_shost_remove:
scsi_remove_host(shost);
err_shost:
{
int err;
- pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME);
+ pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n",
+ DRV_NAME, DRV_VERSION);
isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
if (!isci_transport_template)
u32 parity_count = 0;
u32 llctl, link_rate;
u32 clksm_value = 0;
+ u32 sp_timeouts = 0;
iphy->link_layer_registers = reg;
llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
writel(llctl, &iphy->link_layer_registers->link_layer_control);
+ sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts);
+
+ /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
+ sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);
+
+ /* Set RATE_CHANGE timeout value to 0x3B (59us). This ensures SCU can
+ * lock with 3Gb drive when SCU max rate is set to 1.5Gb.
+ */
+ sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);
+
+ writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts);
+
if (is_a2(ihost->pdev)) {
/* Program the max ARB time for the PHY to 700us so we inter-operate with
* the PMC expander which shuts down PHYs if the expander PHY generates too
#define SCU_AFE_XCVRCR_OFFSET 0x00DC
#define SCU_AFE_LUTCR_OFFSET 0x00E0
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_SHIFT (0UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_MASK (0x000000FFUL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_SHIFT (8UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_MASK (0x0000FF00UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_SHIFT (16UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_MASK (0x00FF0000UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_SHIFT (24UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_MASK (0xFF000000UL)
+
+#define SCU_SAS_PHYTOV_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_##name, value)
+
#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0)
#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003)
#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0)
sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
return SCI_SUCCESS;
case SCI_REQ_TASK_WAIT_TC_RESP:
+ /* The task frame was already confirmed to have been
+ * sent by the SCU HW. Since the state machine is
+ * now only waiting for the task response itself,
+ * abort the request and complete it immediately
+ * and don't wait for the task response.
+ */
sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
return SCI_SUCCESS;
case SCI_REQ_ABORTING:
- sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
- return SCI_SUCCESS;
+ /* If a request has a termination requested twice, return
+ * a failure indication, since HW confirmation of the first
+ * abort is still outstanding.
+ */
case SCI_REQ_COMPLETED:
default:
dev_warn(&ireq->owning_controller->pdev->dev,
}
}
-static void isci_request_process_stp_response(struct sas_task *task,
- void *response_buffer)
+static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis)
{
- struct dev_to_host_fis *d2h_reg_fis = response_buffer;
struct task_status_struct *ts = &task->task_status;
struct ata_task_resp *resp = (void *)&ts->buf[0];
- resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6));
- memcpy(&resp->ending_fis[0], response_buffer + 16, 24);
+ resp->frame_len = sizeof(*fis);
+ memcpy(resp->ending_fis, fis, sizeof(*fis));
ts->buf_valid_size = sizeof(*resp);
- /**
- * If the device fault bit is set in the status register, then
+ /* If the device fault bit is set in the status register, then
* set the sense data and return.
*/
- if (d2h_reg_fis->status & ATA_DF)
+ if (fis->status & ATA_DF)
ts->stat = SAS_PROTO_RESPONSE;
else
ts->stat = SAM_STAT_GOOD;
{
struct sas_task *task = isci_request_access_task(request);
struct ssp_response_iu *resp_iu;
- void *resp_buf;
unsigned long task_flags;
struct isci_remote_device *idev = isci_lookup_device(task->dev);
enum service_response response = SAS_TASK_UNDELIVERED;
task);
if (sas_protocol_ata(task->task_proto)) {
- resp_buf = &request->stp.rsp;
- isci_request_process_stp_response(task,
- resp_buf);
+ isci_process_stp_response(task, &request->stp.rsp);
} else if (SAS_PROTOCOL_SSP == task->task_proto) {
/* crack the iu response buffer. */
*/
buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header);
- size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t);
+ size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(uf_control->address_table.array[0]);
/*
* The Unsolicited Frame buffers are set at the start of the UF
* starting address of the UF address table.
* 64-bit pointers are required by the hardware.
*/
- dma_addr_t *array;
+ u64 *array;
/**
* This field specifies the physical address location for the UF
*/
error = lport->tt.frame_send(lport, fp);
+ if (fh->fh_type == FC_TYPE_BLS)
+ return error;
+
/*
* Update the exchange and sequence flags,
* assuming all frames for the sequence have been sent.
}
/**
- * fc_seq_exch_abort() - Abort an exchange and sequence
- * @req_sp: The sequence to be aborted
+ * fc_exch_abort_locked() - Abort an exchange
+ * @ep: The exchange to be aborted
* @timer_msec: The period of time to wait before aborting
*
- * Generally called because of a timeout or an abort from the upper layer.
+ * Locking notes: Called with exch lock held
+ *
+ * Return value: 0 on success else error code
*/
-static int fc_seq_exch_abort(const struct fc_seq *req_sp,
- unsigned int timer_msec)
+static int fc_exch_abort_locked(struct fc_exch *ep,
+ unsigned int timer_msec)
{
struct fc_seq *sp;
- struct fc_exch *ep;
struct fc_frame *fp;
int error;
- ep = fc_seq_exch(req_sp);
-
- spin_lock_bh(&ep->ex_lock);
if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) ||
- ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) {
- spin_unlock_bh(&ep->ex_lock);
+ ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP))
return -ENXIO;
- }
/*
* Send the abort on a new sequence if possible.
*/
sp = fc_seq_start_next_locked(&ep->seq);
- if (!sp) {
- spin_unlock_bh(&ep->ex_lock);
+ if (!sp)
return -ENOMEM;
- }
ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL;
if (timer_msec)
fc_exch_timer_set_locked(ep, timer_msec);
- spin_unlock_bh(&ep->ex_lock);
/*
* If not logged into the fabric, don't send ABTS but leave
return error;
}
+/**
+ * fc_seq_exch_abort() - Abort an exchange and sequence
+ * @req_sp: The sequence to be aborted
+ * @timer_msec: The period of time to wait before aborting
+ *
+ * Generally called because of a timeout or an abort from the upper layer.
+ *
+ * Return value: 0 on success else error code
+ */
+static int fc_seq_exch_abort(const struct fc_seq *req_sp,
+ unsigned int timer_msec)
+{
+ struct fc_exch *ep;
+ int error;
+
+ ep = fc_seq_exch(req_sp);
+ spin_lock_bh(&ep->ex_lock);
+ error = fc_exch_abort_locked(ep, timer_msec);
+ spin_unlock_bh(&ep->ex_lock);
+ return error;
+}
+
/**
* fc_exch_timeout() - Handle exchange timer expiration
* @work: The work_struct identifying the exchange that timed out
int rc = 1;
spin_lock_bh(&ep->ex_lock);
+ fc_exch_abort_locked(ep, 0);
ep->state |= FC_EX_RST_CLEANUP;
if (cancel_delayed_work(&ep->timeout_work))
atomic_dec(&ep->ex_refcnt); /* drop hold for timer */
struct fc_exch *ep;
struct fc_seq *sp = NULL;
struct fc_frame_header *fh;
+ struct fc_fcp_pkt *fsp = NULL;
int rc = 1;
ep = fc_exch_alloc(lport, fp);
fc_exch_setup_hdr(ep, fp, ep->f_ctl);
sp->cnt++;
- if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD)
+ if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) {
+ fsp = fr_fsp(fp);
fc_fcp_ddp_setup(fr_fsp(fp), ep->xid);
+ }
if (unlikely(lport->tt.frame_send(lport, fp)))
goto err;
spin_unlock_bh(&ep->ex_lock);
return sp;
err:
- fc_fcp_ddp_done(fr_fsp(fp));
+ if (fsp)
+ fc_fcp_ddp_done(fsp);
rc = fc_exch_done_locked(ep);
spin_unlock_bh(&ep->ex_lock);
if (!rc)
struct fc_fcp_internal *si;
int rc = FAILED;
unsigned long flags;
+ int rval;
+
+ rval = fc_block_scsi_eh(sc_cmd);
+ if (rval)
+ return rval;
lport = shost_priv(sc_cmd->device->host);
if (lport->state != LPORT_ST_READY)
int rc = FAILED;
int rval;
- rval = fc_remote_port_chkready(rport);
+ rval = fc_block_scsi_eh(sc_cmd);
if (rval)
- goto out;
+ return rval;
lport = shost_priv(sc_cmd->device->host);
FC_SCSI_DBG(lport, "Resetting host\n");
+ fc_block_scsi_eh(sc_cmd);
+
lport->tt.lport_reset(lport);
wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
*/
#include <linux/timer.h>
+#include <linux/delay.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
FCH_EVT_LIPRESET, 0);
fc_vports_linkchange(lport);
fc_lport_reset_locked(lport);
- if (lport->link_up)
+ if (lport->link_up) {
+ /*
+ * Wait upto resource allocation time out before
+ * doing re-login since incomplete FIP exchanged
+ * from last session may collide with exchanges
+ * in new session.
+ */
+ msleep(lport->r_a_tov);
fc_lport_enter_flogi(lport);
+ }
}
/**
list_for_each_entry(ch, &ex->children, siblings) {
if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
res = sas_find_bcast_dev(ch, src_dev);
- if (src_dev)
+ if (*src_dev)
return res;
}
}
fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
}
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4) {
+ int prot = 0;
vha->flags.difdix_supported = 1;
ql_dbg(ql_dbg_user, vha, 0x7082,
"Registered for DIF/DIX type 1 and 3 protection.\n");
+ if (ql2xenabledif == 1)
+ prot = SHOST_DIX_TYPE0_PROTECTION;
scsi_host_set_prot(vha->host,
- SHOST_DIF_TYPE1_PROTECTION
+ prot | SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE2_PROTECTION
| SHOST_DIF_TYPE3_PROTECTION
| SHOST_DIX_TYPE1_PROTECTION
/*
* Table for showing the current message id in use for particular level
* Change this table for addition of log/debug messages.
- * -----------------------------------------------------
- * | Level | Last Value Used |
- * -----------------------------------------------------
- * | Module Init and Probe | 0x0116 |
- * | Mailbox commands | 0x111e |
- * | Device Discovery | 0x2083 |
- * | Queue Command and IO tracing | 0x302e |
- * | DPC Thread | 0x401c |
- * | Async Events | 0x5059 |
- * | Timer Routines | 0x600d |
- * | User Space Interactions | 0x709c |
- * | Task Management | 0x8043 |
- * | AER/EEH | 0x900f |
- * | Virtual Port | 0xa007 |
- * | ISP82XX Specific | 0xb027 |
- * | MultiQ | 0xc00b |
- * | Misc | 0xd00b |
- * -----------------------------------------------------
+ * ----------------------------------------------------------------------
+ * | Level | Last Value Used | Holes |
+ * ----------------------------------------------------------------------
+ * | Module Init and Probe | 0x0116 | |
+ * | Mailbox commands | 0x1126 | |
+ * | Device Discovery | 0x2083 | |
+ * | Queue Command and IO tracing | 0x302e | 0x3008 |
+ * | DPC Thread | 0x401c | |
+ * | Async Events | 0x5059 | |
+ * | Timer Routines | 0x600d | |
+ * | User Space Interactions | 0x709d | |
+ * | Task Management | 0x8041 | |
+ * | AER/EEH | 0x900f | |
+ * | Virtual Port | 0xa007 | |
+ * | ISP82XX Specific | 0xb04f | |
+ * | MultiQ | 0xc00b | |
+ * | Misc | 0xd00b | |
+ * ----------------------------------------------------------------------
*/
#include "qla_def.h"
#define DT_ISP8021 BIT_14
#define DT_ISP_LAST (DT_ISP8021 << 1)
+#define DT_T10_PI BIT_25
#define DT_IIDMA BIT_26
#define DT_FWI2 BIT_27
#define DT_ZIO_SUPPORTED BIT_28
#define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha))
#define IS_ALOGIO_CAPABLE(ha) (IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha))
+#define IS_T10_PI_CAPABLE(ha) ((ha)->device_type & DT_T10_PI)
#define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA)
#define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2)
#define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED)
/*
* If DIF Error is set in comp_status, these additional fields are
* defined:
+ *
+ * !!! NOTE: Firmware sends expected/actual DIF data in big endian
+ * format; but all of the "data" field gets swab32-d in the beginning
+ * of qla2x00_status_entry().
+ *
* &data[10] : uint8_t report_runt_bg[2]; - computed guard
* &data[12] : uint8_t actual_dif[8]; - DIF Data received
* &data[20] : uint8_t expected_dif[8]; - DIF Data computed
req = vha->req;
rsp = req->rsp;
- atomic_set(&vha->loop_state, LOOP_UPDATE);
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
if (vha->flags.online) {
if (!(rval = qla2x00_fw_ready(vha))) {
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
do {
- atomic_set(&vha->loop_state, LOOP_UPDATE);
-
/* Issue a marker after FW becomes ready. */
qla2x00_marker(vha, req, rsp, 0, 0,
MK_SYNC_ALL);
fcport->d_id.b.al_pa);
}
}
+
+static inline int
+qla2x00_hba_err_chk_enabled(srb_t *sp)
+{
+ /*
+ * Uncomment when corresponding SCSI changes are done.
+ *
+ if (!sp->cmd->prot_chk)
+ return 0;
+ *
+ */
+
+ switch (scsi_get_prot_op(sp->cmd)) {
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ if (ql2xenablehba_err_chk >= 1)
+ return 1;
+ break;
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ if (ql2xenablehba_err_chk >= 2)
+ return 1;
+ break;
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ return 1;
+ }
+ return 0;
+}
*
*/
static inline void
-qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
+qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt,
unsigned int protcnt)
{
- struct sd_dif_tuple *spt;
+ struct scsi_cmnd *cmd = sp->cmd;
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
- unsigned char op = scsi_get_prot_op(cmd);
switch (scsi_get_prot_type(cmd)) {
- /* For TYPE 0 protection: no checking */
case SCSI_PROT_DIF_TYPE0:
- pkt->ref_tag_mask[0] = 0x00;
- pkt->ref_tag_mask[1] = 0x00;
- pkt->ref_tag_mask[2] = 0x00;
- pkt->ref_tag_mask[3] = 0x00;
+ /*
+ * No check for ql2xenablehba_err_chk, as it would be an
+ * I/O error if hba tag generation is not done.
+ */
+ pkt->ref_tag = cpu_to_le32((uint32_t)
+ (0xffffffff & scsi_get_lba(cmd)));
+
+ if (!qla2x00_hba_err_chk_enabled(sp))
+ break;
+
+ pkt->ref_tag_mask[0] = 0xff;
+ pkt->ref_tag_mask[1] = 0xff;
+ pkt->ref_tag_mask[2] = 0xff;
+ pkt->ref_tag_mask[3] = 0xff;
break;
/*
* match LBA in CDB + N
*/
case SCSI_PROT_DIF_TYPE2:
- if (!ql2xenablehba_err_chk)
- break;
-
- if (scsi_prot_sg_count(cmd)) {
- spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
- scsi_prot_sglist(cmd)[0].offset;
- pkt->app_tag = swab32(spt->app_tag);
- pkt->app_tag_mask[0] = 0xff;
- pkt->app_tag_mask[1] = 0xff;
- }
+ pkt->app_tag = __constant_cpu_to_le16(0);
+ pkt->app_tag_mask[0] = 0x0;
+ pkt->app_tag_mask[1] = 0x0;
pkt->ref_tag = cpu_to_le32((uint32_t)
(0xffffffff & scsi_get_lba(cmd)));
+ if (!qla2x00_hba_err_chk_enabled(sp))
+ break;
+
/* enable ALL bytes of the ref tag */
pkt->ref_tag_mask[0] = 0xff;
pkt->ref_tag_mask[1] = 0xff;
* 16 bit app tag.
*/
case SCSI_PROT_DIF_TYPE1:
- if (!ql2xenablehba_err_chk)
+ pkt->ref_tag = cpu_to_le32((uint32_t)
+ (0xffffffff & scsi_get_lba(cmd)));
+ pkt->app_tag = __constant_cpu_to_le16(0);
+ pkt->app_tag_mask[0] = 0x0;
+ pkt->app_tag_mask[1] = 0x0;
+
+ if (!qla2x00_hba_err_chk_enabled(sp))
break;
- if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
- op == SCSI_PROT_WRITE_PASS)) {
- spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
- scsi_prot_sglist(cmd)[0].offset;
- ql_dbg(ql_dbg_io, vha, 0x3008,
- "LBA from user %p, lba = 0x%x for cmd=%p.\n",
- spt, (int)spt->ref_tag, cmd);
- pkt->ref_tag = swab32(spt->ref_tag);
- pkt->app_tag_mask[0] = 0x0;
- pkt->app_tag_mask[1] = 0x0;
- } else {
- pkt->ref_tag = cpu_to_le32((uint32_t)
- (0xffffffff & scsi_get_lba(cmd)));
- pkt->app_tag = __constant_cpu_to_le16(0);
- pkt->app_tag_mask[0] = 0x0;
- pkt->app_tag_mask[1] = 0x0;
- }
/* enable ALL bytes of the ref tag */
pkt->ref_tag_mask[0] = 0xff;
pkt->ref_tag_mask[1] = 0xff;
scsi_get_prot_type(cmd), cmd);
}
+struct qla2_sgx {
+ dma_addr_t dma_addr; /* OUT */
+ uint32_t dma_len; /* OUT */
+
+ uint32_t tot_bytes; /* IN */
+ struct scatterlist *cur_sg; /* IN */
+
+ /* for book keeping, bzero on initial invocation */
+ uint32_t bytes_consumed;
+ uint32_t num_bytes;
+ uint32_t tot_partial;
+
+ /* for debugging */
+ uint32_t num_sg;
+ srb_t *sp;
+};
+static int
+qla24xx_get_one_block_sg(uint32_t blk_sz, struct qla2_sgx *sgx,
+ uint32_t *partial)
+{
+ struct scatterlist *sg;
+ uint32_t cumulative_partial, sg_len;
+ dma_addr_t sg_dma_addr;
+
+ if (sgx->num_bytes == sgx->tot_bytes)
+ return 0;
+
+ sg = sgx->cur_sg;
+ cumulative_partial = sgx->tot_partial;
+
+ sg_dma_addr = sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ sgx->dma_addr = sg_dma_addr + sgx->bytes_consumed;
+
+ if ((cumulative_partial + (sg_len - sgx->bytes_consumed)) >= blk_sz) {
+ sgx->dma_len = (blk_sz - cumulative_partial);
+ sgx->tot_partial = 0;
+ sgx->num_bytes += blk_sz;
+ *partial = 0;
+ } else {
+ sgx->dma_len = sg_len - sgx->bytes_consumed;
+ sgx->tot_partial += sgx->dma_len;
+ *partial = 1;
+ }
+
+ sgx->bytes_consumed += sgx->dma_len;
+
+ if (sg_len == sgx->bytes_consumed) {
+ sg = sg_next(sg);
+ sgx->num_sg++;
+ sgx->cur_sg = sg;
+ sgx->bytes_consumed = 0;
+ }
+
+ return 1;
+}
+
+static int
+qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *ha, srb_t *sp,
+ uint32_t *dsd, uint16_t tot_dsds)
+{
+ void *next_dsd;
+ uint8_t avail_dsds = 0;
+ uint32_t dsd_list_len;
+ struct dsd_dma *dsd_ptr;
+ struct scatterlist *sg_prot;
+ uint32_t *cur_dsd = dsd;
+ uint16_t used_dsds = tot_dsds;
+
+ uint32_t prot_int;
+ uint32_t partial;
+ struct qla2_sgx sgx;
+ dma_addr_t sle_dma;
+ uint32_t sle_dma_len, tot_prot_dma_len = 0;
+ struct scsi_cmnd *cmd = sp->cmd;
+
+ prot_int = cmd->device->sector_size;
+
+ memset(&sgx, 0, sizeof(struct qla2_sgx));
+ sgx.tot_bytes = scsi_bufflen(sp->cmd);
+ sgx.cur_sg = scsi_sglist(sp->cmd);
+ sgx.sp = sp;
+
+ sg_prot = scsi_prot_sglist(sp->cmd);
+
+ while (qla24xx_get_one_block_sg(prot_int, &sgx, &partial)) {
+
+ sle_dma = sgx.dma_addr;
+ sle_dma_len = sgx.dma_len;
+alloc_and_fill:
+ /* Allocate additional continuation packets? */
+ if (avail_dsds == 0) {
+ avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ?
+ QLA_DSDS_PER_IOCB : used_dsds;
+ dsd_list_len = (avail_dsds + 1) * 12;
+ used_dsds -= avail_dsds;
+
+ /* allocate tracking DS */
+ dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC);
+ if (!dsd_ptr)
+ return 1;
+
+ /* allocate new list */
+ dsd_ptr->dsd_addr = next_dsd =
+ dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC,
+ &dsd_ptr->dsd_list_dma);
+
+ if (!next_dsd) {
+ /*
+ * Need to cleanup only this dsd_ptr, rest
+ * will be done by sp_free_dma()
+ */
+ kfree(dsd_ptr);
+ return 1;
+ }
+
+ list_add_tail(&dsd_ptr->list,
+ &((struct crc_context *)sp->ctx)->dsd_list);
+
+ sp->flags |= SRB_CRC_CTX_DSD_VALID;
+
+ /* add new list to cmd iocb or last list */
+ *cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
+ *cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
+ *cur_dsd++ = dsd_list_len;
+ cur_dsd = (uint32_t *)next_dsd;
+ }
+ *cur_dsd++ = cpu_to_le32(LSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(MSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(sle_dma_len);
+ avail_dsds--;
+
+ if (partial == 0) {
+ /* Got a full protection interval */
+ sle_dma = sg_dma_address(sg_prot) + tot_prot_dma_len;
+ sle_dma_len = 8;
+
+ tot_prot_dma_len += sle_dma_len;
+ if (tot_prot_dma_len == sg_dma_len(sg_prot)) {
+ tot_prot_dma_len = 0;
+ sg_prot = sg_next(sg_prot);
+ }
+
+ partial = 1; /* So as to not re-enter this block */
+ goto alloc_and_fill;
+ }
+ }
+ /* Null termination */
+ *cur_dsd++ = 0;
+ *cur_dsd++ = 0;
+ *cur_dsd++ = 0;
+ return 0;
+}
static int
qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd,
uint16_t tot_dsds)
struct scsi_cmnd *cmd;
struct scatterlist *cur_seg;
int sgc;
- uint32_t total_bytes;
+ uint32_t total_bytes = 0;
uint32_t data_bytes;
uint32_t dif_bytes;
uint8_t bundling = 1;
__constant_cpu_to_le16(CF_READ_DATA);
}
- tot_prot_dsds = scsi_prot_sg_count(cmd);
- if (!tot_prot_dsds)
+ if ((scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_INSERT) ||
+ (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_STRIP) ||
+ (scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_STRIP) ||
+ (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_INSERT))
bundling = 0;
/* Allocate CRC context from global pool */
INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list);
- qla24xx_set_t10dif_tags(cmd, (struct fw_dif_context *)
+ qla24xx_set_t10dif_tags(sp, (struct fw_dif_context *)
&crc_ctx_pkt->ref_tag, tot_prot_dsds);
cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma));
fcp_cmnd->additional_cdb_len |= 2;
int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
- host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
/* Compute dif len and adjust data len to incude protection */
- total_bytes = data_bytes;
dif_bytes = 0;
blk_size = cmd->device->sector_size;
- if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
- dif_bytes = (data_bytes / blk_size) * 8;
- total_bytes += dif_bytes;
+ dif_bytes = (data_bytes / blk_size) * 8;
+
+ switch (scsi_get_prot_op(sp->cmd)) {
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ total_bytes = data_bytes;
+ data_bytes += dif_bytes;
+ break;
+
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ total_bytes = data_bytes + dif_bytes;
+ break;
+ default:
+ BUG();
}
- if (!ql2xenablehba_err_chk)
+ if (!qla2x00_hba_err_chk_enabled(sp))
fw_prot_opts |= 0x10; /* Disable Guard tag checking */
if (!bundling) {
cmd_pkt->control_flags |=
__constant_cpu_to_le16(CF_DATA_SEG_DESCR_ENABLE);
- if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
+
+ if (!bundling && tot_prot_dsds) {
+ if (qla24xx_walk_and_build_sglist_no_difb(ha, sp,
+ cur_dsd, tot_dsds))
+ goto crc_queuing_error;
+ } else if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
(tot_dsds - tot_prot_dsds)))
goto crc_queuing_error;
goto queuing_error;
else
sp->flags |= SRB_DMA_VALID;
+
+ if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
+ (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
+ struct qla2_sgx sgx;
+ uint32_t partial;
+
+ memset(&sgx, 0, sizeof(struct qla2_sgx));
+ sgx.tot_bytes = scsi_bufflen(cmd);
+ sgx.cur_sg = scsi_sglist(cmd);
+ sgx.sp = sp;
+
+ nseg = 0;
+ while (qla24xx_get_one_block_sg(
+ cmd->device->sector_size, &sgx, &partial))
+ nseg++;
+ }
} else
nseg = 0;
goto queuing_error;
else
sp->flags |= SRB_CRC_PROT_DMA_VALID;
+
+ if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
+ (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
+ nseg = scsi_bufflen(cmd) / cmd->device->sector_size;
+ }
} else {
nseg = 0;
}
/* Build header part of command packet (excluding the OPCODE). */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
+ sp->handle = handle;
sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
vha->flags.rscn_queue_overflow = 1;
}
- atomic_set(&vha->loop_state, LOOP_UPDATE);
atomic_set(&vha->loop_down_timer, 0);
vha->flags.management_server_logged_in = 0;
* ASC/ASCQ fields in the sense buffer with ILLEGAL_REQUEST
* to indicate to the kernel that the HBA detected error.
*/
-static inline void
+static inline int
qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
{
struct scsi_qla_host *vha = sp->fcport->vha;
struct scsi_cmnd *cmd = sp->cmd;
- struct scsi_dif_tuple *ep =
- (struct scsi_dif_tuple *)&sts24->data[20];
- struct scsi_dif_tuple *ap =
- (struct scsi_dif_tuple *)&sts24->data[12];
+ uint8_t *ap = &sts24->data[12];
+ uint8_t *ep = &sts24->data[20];
uint32_t e_ref_tag, a_ref_tag;
uint16_t e_app_tag, a_app_tag;
uint16_t e_guard, a_guard;
- e_ref_tag = be32_to_cpu(ep->ref_tag);
- a_ref_tag = be32_to_cpu(ap->ref_tag);
- e_app_tag = be16_to_cpu(ep->app_tag);
- a_app_tag = be16_to_cpu(ap->app_tag);
- e_guard = be16_to_cpu(ep->guard);
- a_guard = be16_to_cpu(ap->guard);
+ /*
+ * swab32 of the "data" field in the beginning of qla2x00_status_entry()
+ * would make guard field appear at offset 2
+ */
+ a_guard = le16_to_cpu(*(uint16_t *)(ap + 2));
+ a_app_tag = le16_to_cpu(*(uint16_t *)(ap + 0));
+ a_ref_tag = le32_to_cpu(*(uint32_t *)(ap + 4));
+ e_guard = le16_to_cpu(*(uint16_t *)(ep + 2));
+ e_app_tag = le16_to_cpu(*(uint16_t *)(ep + 0));
+ e_ref_tag = le32_to_cpu(*(uint32_t *)(ep + 4));
ql_dbg(ql_dbg_io, vha, 0x3023,
"iocb(s) %p Returned STATUS.\n", sts24);
cmd->cmnd[0], (u64)scsi_get_lba(cmd), a_ref_tag, e_ref_tag,
a_app_tag, e_app_tag, a_guard, e_guard);
+ /*
+ * Ignore sector if:
+ * For type 3: ref & app tag is all 'f's
+ * For type 0,1,2: app tag is all 'f's
+ */
+ if ((a_app_tag == 0xffff) &&
+ ((scsi_get_prot_type(cmd) != SCSI_PROT_DIF_TYPE3) ||
+ (a_ref_tag == 0xffffffff))) {
+ uint32_t blocks_done, resid;
+ sector_t lba_s = scsi_get_lba(cmd);
+
+ /* 2TB boundary case covered automatically with this */
+ blocks_done = e_ref_tag - (uint32_t)lba_s + 1;
+
+ resid = scsi_bufflen(cmd) - (blocks_done *
+ cmd->device->sector_size);
+
+ scsi_set_resid(cmd, resid);
+ cmd->result = DID_OK << 16;
+
+ /* Update protection tag */
+ if (scsi_prot_sg_count(cmd)) {
+ uint32_t i, j = 0, k = 0, num_ent;
+ struct scatterlist *sg;
+ struct sd_dif_tuple *spt;
+
+ /* Patch the corresponding protection tags */
+ scsi_for_each_prot_sg(cmd, sg,
+ scsi_prot_sg_count(cmd), i) {
+ num_ent = sg_dma_len(sg) / 8;
+ if (k + num_ent < blocks_done) {
+ k += num_ent;
+ continue;
+ }
+ j = blocks_done - k - 1;
+ k = blocks_done;
+ break;
+ }
+
+ if (k != blocks_done) {
+ qla_printk(KERN_WARNING, sp->fcport->vha->hw,
+ "unexpected tag values tag:lba=%x:%llx)\n",
+ e_ref_tag, (unsigned long long)lba_s);
+ return 1;
+ }
+
+ spt = page_address(sg_page(sg)) + sg->offset;
+ spt += j;
+
+ spt->app_tag = 0xffff;
+ if (scsi_get_prot_type(cmd) == SCSI_PROT_DIF_TYPE3)
+ spt->ref_tag = 0xffffffff;
+ }
+
+ return 0;
+ }
+
/* check guard */
if (e_guard != a_guard) {
scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
set_driver_byte(cmd, DRIVER_SENSE);
set_host_byte(cmd, DID_ABORT);
cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
- return;
+ return 1;
}
- /* check appl tag */
- if (e_app_tag != a_app_tag) {
+ /* check ref tag */
+ if (e_ref_tag != a_ref_tag) {
scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
- 0x10, 0x2);
+ 0x10, 0x3);
set_driver_byte(cmd, DRIVER_SENSE);
set_host_byte(cmd, DID_ABORT);
cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
- return;
+ return 1;
}
- /* check ref tag */
- if (e_ref_tag != a_ref_tag) {
+ /* check appl tag */
+ if (e_app_tag != a_app_tag) {
scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
- 0x10, 0x3);
+ 0x10, 0x2);
set_driver_byte(cmd, DRIVER_SENSE);
set_host_byte(cmd, DID_ABORT);
cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
- return;
+ return 1;
}
+
+ return 1;
}
/**
break;
case CS_DIF_ERROR:
- qla2x00_handle_dif_error(sp, sts24);
+ logit = qla2x00_handle_dif_error(sp, sts24);
break;
default:
cp->result = DID_ERROR << 16;
goto skip_msi;
}
- if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
- !QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
+ if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX)) {
ql_log(ql_log_warn, vha, 0x0035,
"MSI-X; Unsupported ISP2432 (0x%X, 0x%X).\n",
- ha->pdev->revision, ha->fw_attributes);
+ ha->pdev->revision, QLA_MSIX_CHIP_REV_24XX);
goto skip_msix;
}
host->can_queue = base_vha->req->length + 128;
host->this_id = 255;
host->cmd_per_lun = 3;
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
host->max_cmd_len = 32;
else
host->max_cmd_len = MAX_CMDSZ;
struct qla_hw_data *ha;
struct rsp_que *rsp;
struct device_reg_82xx __iomem *reg;
+ unsigned long flags;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
ha = rsp->hw;
reg = &ha->iobase->isp82;
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
vha = pci_get_drvdata(ha->pdev);
qla24xx_process_response_queue(vha, rsp);
WRT_REG_DWORD(®->host_int, 0);
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
return IRQ_HANDLED;
}
int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
+ /* build FCP_CMND IU */
+ memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
+ int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
+ ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
+
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ ctx->fcp_cmnd->additional_cdb_len |= 1;
+ else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+ ctx->fcp_cmnd->additional_cdb_len |= 2;
+
/*
* Update tagged queuing modifier -- default is TSK_SIMPLE (0).
*/
}
}
- /* build FCP_CMND IU */
- memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
- int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
- ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
-
- if (cmd->sc_data_direction == DMA_TO_DEVICE)
- ctx->fcp_cmnd->additional_cdb_len |= 1;
- else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
- ctx->fcp_cmnd->additional_cdb_len |= 2;
-
memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 +
"Maximum queue depth to report for target devices.");
/* Do not change the value of this after module load */
-int ql2xenabledif = 1;
+int ql2xenabledif = 0;
module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xenabledif,
" Enable T10-CRC-DIF "
- " Default is 0 - No DIF Support. 1 - Enable it");
+ " Default is 0 - No DIF Support. 1 - Enable it"
+ ", 2 - Enable DIF for all types, except Type 0.");
-int ql2xenablehba_err_chk;
+int ql2xenablehba_err_chk = 2;
module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xenablehba_err_chk,
- " Enable T10-CRC-DIF Error isolation by HBA"
- " Default is 0 - Error isolation disabled, 1 - Enable it");
+ " Enable T10-CRC-DIF Error isolation by HBA:\n"
+ " Default is 1.\n"
+ " 0 -- Error isolation disabled\n"
+ " 1 -- Error isolation enabled only for DIX Type 0\n"
+ " 2 -- Error isolation enabled for all Types\n");
int ql2xiidmaenable=1;
module_param(ql2xiidmaenable, int, S_IRUGO);
"Abort command mbx success.\n");
wait = 1;
}
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
qla2x00_sp_compl(ha, sp);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ /* Did the command return during mailbox execution? */
+ if (ret == FAILED && !CMD_SP(cmd))
+ ret = SUCCESS;
/* Wait for the command to be returned. */
if (wait) {
host->this_id = 255;
host->cmd_per_lun = 3;
host->unique_id = host->host_no;
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
host->max_cmd_len = 32;
else
host->max_cmd_len = MAX_CMDSZ;
"Detected hba at address=%p.\n",
ha);
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4) {
+ int prot = 0;
base_vha->flags.difdix_supported = 1;
ql_dbg(ql_dbg_init, base_vha, 0x00f1,
"Registering for DIF/DIX type 1 and 3 protection.\n");
+ if (ql2xenabledif == 1)
+ prot = SHOST_DIX_TYPE0_PROTECTION;
scsi_host_set_prot(host,
- SHOST_DIF_TYPE1_PROTECTION
+ prot | SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE2_PROTECTION
| SHOST_DIF_TYPE3_PROTECTION
| SHOST_DIX_TYPE1_PROTECTION
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.07.03-k"
+#define QLA2XXX_VERSION "8.03.07.07-k"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
config SCSI_QLA_ISCSI
tristate "QLogic ISP4XXX and ISP82XX host adapter family support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && NET
select SCSI_ISCSI_ATTRS
---help---
This driver supports the QLogic 40xx (ISP4XXX) and 8022 (ISP82XX)
!defined(CONFIG_CPU_SUBTYPE_SH7709)
[IRQ_TYPE_LEVEL_HIGH] = VALID(3),
#endif
+#if defined(CONFIG_ARCH_SH7372)
+ [IRQ_TYPE_EDGE_BOTH] = VALID(4),
+#endif
};
static int intc_set_type(struct irq_data *data, unsigned int type)
#include <asm/io.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/cpu.h>
/* SPI register offsets */
{
struct device *dev = mspi->dev;
+ if (!(mspi->flags & SPI_CPM_MODE))
+ return;
+
dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE);
dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE);
cpm_muram_free(cpm_muram_offset(mspi->tx_bd));
int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
if (cs_gpio < 0)
cs_gpio = mxc_platform_info->chipselect[i];
+
+ spi_imx->chipselect[i] = cs_gpio;
if (cs_gpio < 0)
continue;
- spi_imx->chipselect[i] = cs_gpio;
+
ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
if (ret) {
while (i > 0) {
#define PCH_RX_THOLD 7
#define PCH_RX_THOLD_MAX 15
+#define PCH_TX_THOLD 2
+
#define PCH_MAX_BAUDRATE 5000000
#define PCH_MAX_FIFO_DEPTH 16
#define PCH_SLEEP_TIME 10
#define SSN_LOW 0x02U
+#define SSN_HIGH 0x03U
#define SSN_NO_CONTROL 0x00U
#define PCH_MAX_CS 0xFF
#define PCI_DEVICE_ID_GE_SPI 0x8816
/* if transfer complete interrupt */
if (reg_spsr_val & SPSR_FI_BIT) {
- if (tx_index < bpw_len)
+ if ((tx_index == bpw_len) && (rx_index == tx_index)) {
+ /* disable interrupts */
+ pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
+
+ /* transfer is completed;
+ inform pch_spi_process_messages */
+ data->transfer_complete = true;
+ data->transfer_active = false;
+ wake_up(&data->wait);
+ } else {
dev_err(&data->master->dev,
"%s : Transfer is not completed", __func__);
- /* disable interrupts */
- pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
-
- /* transfer is completed;inform pch_spi_process_messages */
- data->transfer_complete = true;
- data->transfer_active = false;
- wake_up(&data->wait);
+ }
}
}
"%s returning due to suspend\n", __func__);
return IRQ_NONE;
}
- if (data->use_dma)
- return IRQ_NONE;
io_remap_addr = data->io_remap_addr;
spsr = io_remap_addr + PCH_SPSR;
reg_spsr_val = ioread32(spsr);
- if (reg_spsr_val & SPSR_ORF_BIT)
- dev_err(&board_dat->pdev->dev, "%s Over run error", __func__);
+ if (reg_spsr_val & SPSR_ORF_BIT) {
+ dev_err(&board_dat->pdev->dev, "%s Over run error\n", __func__);
+ if (data->current_msg->complete != 0) {
+ data->transfer_complete = true;
+ data->current_msg->status = -EIO;
+ data->current_msg->complete(data->current_msg->context);
+ data->bcurrent_msg_processing = false;
+ data->current_msg = NULL;
+ data->cur_trans = NULL;
+ }
+ }
+
+ if (data->use_dma)
+ return IRQ_NONE;
/* Check if the interrupt is for SPI device */
if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) {
wait_event_interruptible(data->wait, data->transfer_complete);
- pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
- dev_dbg(&data->master->dev,
- "%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
-
/* clear all interrupts */
pch_spi_writereg(data->master, PCH_SPSR,
pch_spi_readreg(data->master, PCH_SPSR));
}
}
-static void pch_spi_start_transfer(struct pch_spi_data *data)
+static int pch_spi_start_transfer(struct pch_spi_data *data)
{
struct pch_spi_dma_ctrl *dma;
unsigned long flags;
+ int rtn;
dma = &data->dma;
initiating the transfer. */
dev_dbg(&data->master->dev,
"%s:waiting for transfer to get over\n", __func__);
- wait_event_interruptible(data->wait, data->transfer_complete);
+ rtn = wait_event_interruptible_timeout(data->wait,
+ data->transfer_complete,
+ msecs_to_jiffies(2 * HZ));
dma_sync_sg_for_cpu(&data->master->dev, dma->sg_rx_p, dma->nent,
DMA_FROM_DEVICE);
+
+ dma_sync_sg_for_cpu(&data->master->dev, dma->sg_tx_p, dma->nent,
+ DMA_FROM_DEVICE);
+ memset(data->dma.tx_buf_virt, 0, PAGE_SIZE);
+
async_tx_ack(dma->desc_rx);
async_tx_ack(dma->desc_tx);
kfree(dma->sg_tx_p);
kfree(dma->sg_rx_p);
spin_lock_irqsave(&data->lock, flags);
- pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
- dev_dbg(&data->master->dev,
- "%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
/* clear fifo threshold, disable interrupts, disable SPI transfer */
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
pch_spi_clear_fifo(data->master);
spin_unlock_irqrestore(&data->lock, flags);
+
+ return rtn;
}
static void pch_dma_rx_complete(void *arg)
/* set receive fifo threshold and transmit fifo threshold */
pch_spi_setclr_reg(data->master, PCH_SPCR,
((size - 1) << SPCR_RFIC_FIELD) |
- ((PCH_MAX_FIFO_DEPTH - PCH_DMA_TRANS_SIZE) <<
- SPCR_TFIC_FIELD),
+ (PCH_TX_THOLD << SPCR_TFIC_FIELD),
MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS);
spin_unlock_irqrestore(&data->lock, flags);
/* offset, length setting */
sg = dma->sg_rx_p;
for (i = 0; i < num; i++, sg++) {
- if (i == 0) {
- sg->offset = 0;
+ if (i == (num - 2)) {
+ sg->offset = size * i;
+ sg->offset = sg->offset * (*bpw / 8);
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), rem,
sg->offset);
sg_dma_len(sg) = rem;
+ } else if (i == (num - 1)) {
+ sg->offset = size * (i - 1) + rem;
+ sg->offset = sg->offset * (*bpw / 8);
+ sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
+ sg->offset);
+ sg_dma_len(sg) = size;
} else {
- sg->offset = rem + size * (i - 1);
+ sg->offset = size * i;
sg->offset = sg->offset * (*bpw / 8);
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
sg->offset);
dma->desc_rx = desc_rx;
/* TX */
+ if (data->bpw_len > PCH_DMA_TRANS_SIZE) {
+ num = data->bpw_len / PCH_DMA_TRANS_SIZE;
+ size = PCH_DMA_TRANS_SIZE;
+ rem = 16;
+ } else {
+ num = 1;
+ size = data->bpw_len;
+ rem = data->bpw_len;
+ }
+
dma->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */
/* offset, length setting */
if (data->use_dma)
pch_spi_request_dma(data,
data->current_msg->spi->bits_per_word);
+ pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
do {
/* If we are already processing a message get the next
transfer structure from the message otherwise retrieve
if (data->use_dma) {
pch_spi_handle_dma(data, &bpw);
- pch_spi_start_transfer(data);
+ if (!pch_spi_start_transfer(data))
+ goto out;
pch_spi_copy_rx_data_for_dma(data, bpw);
} else {
pch_spi_set_tx(data, &bpw);
} while (data->cur_trans != NULL);
+out:
+ pch_spi_writereg(data->master, PCH_SSNXCR, SSN_HIGH);
if (data->use_dma)
pch_spi_release_dma(data);
}
#include <linux/io.h>
#include <linux/errno.h>
+#include <linux/string.h>
#include <brcm_hw_ids.h>
#include <chipcommon.h>
#define _BRCM_TYPES_H_
#include <linux/types.h>
+#include <linux/io.h>
/* Bus types */
#define SI_BUS 0 /* SOC Interconnect */
struct comedi_insn *insn,
unsigned int *data);
static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd);
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_ISA_DMA_API
static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd);
+#endif
+#ifdef CONFIG_COMEDI_PCI
static int labpc_find_device(struct comedi_device *dev, int bus, int slot);
#endif
static int labpc_dio_mem_callback(int dir, int port, int data,
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/interrupt.h>
#include <linux/phy.h>
#include <linux/ratelimit.h>
#include <net/dst.h>
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/interrupt.h>
#include <net/dst.h>
#include <asm/octeon/octeon.h>
break;
#ifdef CONFIG_OMAP_MCBSP
case MCBSP_CLK:
- omap_mcbsp_set_io_type(MCBSP_ID(clk_id), OMAP_MCBSP_POLL_IO);
omap_mcbsp_request(MCBSP_ID(clk_id));
omap2_mcbsp_set_clks_src(MCBSP_ID(clk_id), MCBSP_CLKS_PAD_SRC);
break;
struct tmem_obj *obj;
void *pampd;
bool ephemeral = is_ephemeral(pool);
- uint32_t ret = -1;
+ int ret = -1;
struct tmem_hashbucket *hb;
bool free = (get_and_free == 1) || ((get_and_free == 0) && ephemeral);
bool lock_held = false;
size_t clen;
int ret;
unsigned long count;
- struct page *page = virt_to_page(data);
+ struct page *page = (struct page *)(data);
struct zcache_client *cli = pool->client;
uint16_t client_id = get_client_id_from_client(cli);
unsigned long zv_mean_zsize;
int ret = 0;
BUG_ON(is_ephemeral(pool));
- zv_decompress(virt_to_page(data), pampd);
+ zv_decompress((struct page *)(data), pampd);
return ret;
}
int ret = 0;
BUG_ON(!is_ephemeral(pool));
- zbud_decompress(virt_to_page(data), pampd);
+ zbud_decompress((struct page *)(data), pampd);
zbud_free_and_delist((struct zbud_hdr *)pampd);
atomic_dec(&zcache_curr_eph_pampd_count);
return ret;
goto out;
if (!zcache_freeze && zcache_do_preload(pool) == 0) {
/* preload does preempt_disable on success */
- ret = tmem_put(pool, oidp, index, page_address(page),
+ ret = tmem_put(pool, oidp, index, (char *)(page),
PAGE_SIZE, 0, is_ephemeral(pool));
if (ret < 0) {
if (is_ephemeral(pool))
pool = zcache_get_pool_by_id(cli_id, pool_id);
if (likely(pool != NULL)) {
if (atomic_read(&pool->obj_count) > 0)
- ret = tmem_get(pool, oidp, index, page_address(page),
+ ret = tmem_get(pool, oidp, index, (char *)(page),
&size, 0, is_ephemeral(pool));
zcache_put_pool(pool);
}
case 0:
return iscsit_handle_recovery_datain_or_r2t(conn, buf,
hdr->itt, hdr->ttt, hdr->begrun, hdr->runlength);
- return 0;
case ISCSI_FLAG_SNACK_TYPE_STATUS:
return iscsit_handle_status_snack(conn, hdr->itt, hdr->ttt,
hdr->begrun, hdr->runlength);
ISCSI_TCP);
if (IS_ERR(tpg_np)) {
iscsit_put_tpg(tpg);
- return ERR_PTR(PTR_ERR(tpg_np));
+ return ERR_CAST(tpg_np);
}
pr_debug("LIO_Target_ConfigFS: addnptotpg done!\n");
tiqn = iscsit_add_tiqn((unsigned char *)name);
if (IS_ERR(tiqn))
- return ERR_PTR(PTR_ERR(tiqn));
+ return ERR_CAST(tiqn);
/*
* Setup struct iscsi_wwn_stat_grps for se_wwn->fabric_stat_group.
*/
*/
list_for_each_entry(ooo_tmp, &sess->sess_ooo_cmdsn_list,
ooo_list) {
- while (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn)
+ if (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn)
continue;
list_add(&ooo_cmdsn->ooo_list,
ISCSI_LOGIN_STATUS_TARGET_ERROR);
goto new_sess_out;
}
-#if 0
- if (!iscsi_ntop6((const unsigned char *)
- &sock_in6.sin6_addr.in6_u,
- (char *)&conn->ipv6_login_ip[0],
- IPV6_ADDRESS_SPACE)) {
- pr_err("iscsi_ntop6() failed\n");
- iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
- ISCSI_LOGIN_STATUS_TARGET_ERROR);
- goto new_sess_out;
- }
-#else
- pr_debug("Skipping iscsi_ntop6()\n");
-#endif
+ snprintf(conn->login_ip, sizeof(conn->login_ip), "%pI6c",
+ &sock_in6.sin6_addr.in6_u);
+ conn->login_port = ntohs(sock_in6.sin6_port);
} else {
memset(&sock_in, 0, sizeof(struct sockaddr_in));
struct iscsi_param_list *src_param_list,
int leading)
{
- struct iscsi_param *new_param = NULL, *param = NULL;
+ struct iscsi_param *param = NULL;
+ struct iscsi_param *new_param = NULL;
struct iscsi_param_list *param_list = NULL;
param_list = kzalloc(sizeof(struct iscsi_param_list), GFP_KERNEL);
if (!param_list) {
- pr_err("Unable to allocate memory for"
- " struct iscsi_param_list.\n");
+ pr_err("Unable to allocate memory for struct iscsi_param_list.\n");
goto err_out;
}
INIT_LIST_HEAD(¶m_list->param_list);
new_param = kzalloc(sizeof(struct iscsi_param), GFP_KERNEL);
if (!new_param) {
- pr_err("Unable to allocate memory for"
- " struct iscsi_param.\n");
+ pr_err("Unable to allocate memory for struct iscsi_param.\n");
+ goto err_out;
+ }
+
+ new_param->name = kstrdup(param->name, GFP_KERNEL);
+ new_param->value = kstrdup(param->value, GFP_KERNEL);
+ if (!new_param->value || !new_param->name) {
+ kfree(new_param->value);
+ kfree(new_param->name);
+ kfree(new_param);
+ pr_err("Unable to allocate memory for parameter name/value.\n");
goto err_out;
}
new_param->use = param->use;
new_param->type_range = param->type_range;
- new_param->name = kzalloc(strlen(param->name) + 1, GFP_KERNEL);
- if (!new_param->name) {
- pr_err("Unable to allocate memory for"
- " parameter name.\n");
- goto err_out;
- }
-
- new_param->value = kzalloc(strlen(param->value) + 1,
- GFP_KERNEL);
- if (!new_param->value) {
- pr_err("Unable to allocate memory for"
- " parameter value.\n");
- goto err_out;
- }
-
- memcpy(new_param->name, param->name, strlen(param->name));
- new_param->name[strlen(param->name)] = '\0';
- memcpy(new_param->value, param->value, strlen(param->value));
- new_param->value[strlen(param->value)] = '\0';
-
list_add_tail(&new_param->p_list, ¶m_list->param_list);
}
- if (!list_empty(¶m_list->param_list))
+ if (!list_empty(¶m_list->param_list)) {
*dst_param_list = param_list;
- else {
+ } else {
pr_err("No parameters allocated.\n");
goto err_out;
}
u8 DataSequenceInOrder = 0;
u8 ErrorRecoveryLevel = 0, SessionType = 0;
u8 IFMarker = 0, OFMarker = 0;
- u8 IFMarkInt_Reject = 0, OFMarkInt_Reject = 0;
+ u8 IFMarkInt_Reject = 1, OFMarkInt_Reject = 1;
u32 FirstBurstLength = 0, MaxBurstLength = 0;
struct iscsi_param *param = NULL;
if (!cmd->tmr_req) {
pr_err("Unable to allocate memory for"
" Task Management command!\n");
- return NULL;
+ goto out;
}
/*
* TASK_REASSIGN for ERL=2 / connection stays inside of
return cmd;
out:
iscsit_release_cmd(cmd);
- if (se_cmd)
- transport_free_se_cmd(se_cmd);
return NULL;
}
spin_unlock_bh(&sess->session_usage_lock);
}
-/*
- * Used before iscsi_do[rx,tx]_data() to determine iov and [rx,tx]_marker
- * array counts needed for sync and steering.
- */
-static int iscsit_determine_sync_and_steering_counts(
- struct iscsi_conn *conn,
- struct iscsi_data_count *count)
-{
- u32 length = count->data_length;
- u32 marker, markint;
-
- count->sync_and_steering = 1;
-
- marker = (count->type == ISCSI_RX_DATA) ?
- conn->of_marker : conn->if_marker;
- markint = (count->type == ISCSI_RX_DATA) ?
- (conn->conn_ops->OFMarkInt * 4) :
- (conn->conn_ops->IFMarkInt * 4);
- count->ss_iov_count = count->iov_count;
-
- while (length > 0) {
- if (length >= marker) {
- count->ss_iov_count += 3;
- count->ss_marker_count += 2;
-
- length -= marker;
- marker = markint;
- } else
- length = 0;
- }
-
- return 0;
-}
-
/*
* Setup conn->if_marker and conn->of_marker values based upon
* the initial marker-less interval. (see iSCSI v19 A.2)
struct kvec iov;
u32 tx_hdr_size, data_len;
u32 offset = cmd->first_data_sg_off;
- int tx_sent;
+ int tx_sent, iov_off;
send_hdr:
tx_hdr_size = ISCSI_HDR_LEN;
}
data_len = cmd->tx_size - tx_hdr_size - cmd->padding;
- if (conn->conn_ops->DataDigest)
+ /*
+ * Set iov_off used by padding and data digest tx_data() calls below
+ * in order to determine proper offset into cmd->iov_data[]
+ */
+ if (conn->conn_ops->DataDigest) {
data_len -= ISCSI_CRC_LEN;
-
+ if (cmd->padding)
+ iov_off = (cmd->iov_data_count - 2);
+ else
+ iov_off = (cmd->iov_data_count - 1);
+ } else {
+ iov_off = (cmd->iov_data_count - 1);
+ }
/*
* Perform sendpage() for each page in the scatterlist
*/
send_padding:
if (cmd->padding) {
- struct kvec *iov_p =
- &cmd->iov_data[cmd->iov_data_count-1];
+ struct kvec *iov_p = &cmd->iov_data[iov_off++];
tx_sent = tx_data(conn, iov_p, 1, cmd->padding);
if (cmd->padding != tx_sent) {
send_datacrc:
if (conn->conn_ops->DataDigest) {
- struct kvec *iov_d =
- &cmd->iov_data[cmd->iov_data_count];
+ struct kvec *iov_d = &cmd->iov_data[iov_off];
tx_sent = tx_data(conn, iov_d, 1, ISCSI_CRC_LEN);
if (ISCSI_CRC_LEN != tx_sent) {
struct iscsi_data_count *count)
{
int data = count->data_length, rx_loop = 0, total_rx = 0, iov_len;
- u32 rx_marker_val[count->ss_marker_count], rx_marker_iov = 0;
- struct kvec iov[count->ss_iov_count], *iov_p;
+ struct kvec *iov_p;
struct msghdr msg;
if (!conn || !conn->sock || !conn->conn_ops)
memset(&msg, 0, sizeof(struct msghdr));
- if (count->sync_and_steering) {
- int size = 0;
- u32 i, orig_iov_count = 0;
- u32 orig_iov_len = 0, orig_iov_loc = 0;
- u32 iov_count = 0, per_iov_bytes = 0;
- u32 *rx_marker, old_rx_marker = 0;
- struct kvec *iov_record;
-
- memset(&rx_marker_val, 0,
- count->ss_marker_count * sizeof(u32));
- memset(&iov, 0, count->ss_iov_count * sizeof(struct kvec));
-
- iov_record = count->iov;
- orig_iov_count = count->iov_count;
- rx_marker = &conn->of_marker;
-
- i = 0;
- size = data;
- orig_iov_len = iov_record[orig_iov_loc].iov_len;
- while (size > 0) {
- pr_debug("rx_data: #1 orig_iov_len %u,"
- " orig_iov_loc %u\n", orig_iov_len, orig_iov_loc);
- pr_debug("rx_data: #2 rx_marker %u, size"
- " %u\n", *rx_marker, size);
-
- if (orig_iov_len >= *rx_marker) {
- iov[iov_count].iov_len = *rx_marker;
- iov[iov_count++].iov_base =
- (iov_record[orig_iov_loc].iov_base +
- per_iov_bytes);
-
- iov[iov_count].iov_len = (MARKER_SIZE / 2);
- iov[iov_count++].iov_base =
- &rx_marker_val[rx_marker_iov++];
- iov[iov_count].iov_len = (MARKER_SIZE / 2);
- iov[iov_count++].iov_base =
- &rx_marker_val[rx_marker_iov++];
- old_rx_marker = *rx_marker;
-
- /*
- * OFMarkInt is in 32-bit words.
- */
- *rx_marker = (conn->conn_ops->OFMarkInt * 4);
- size -= old_rx_marker;
- orig_iov_len -= old_rx_marker;
- per_iov_bytes += old_rx_marker;
-
- pr_debug("rx_data: #3 new_rx_marker"
- " %u, size %u\n", *rx_marker, size);
- } else {
- iov[iov_count].iov_len = orig_iov_len;
- iov[iov_count++].iov_base =
- (iov_record[orig_iov_loc].iov_base +
- per_iov_bytes);
-
- per_iov_bytes = 0;
- *rx_marker -= orig_iov_len;
- size -= orig_iov_len;
-
- if (size)
- orig_iov_len =
- iov_record[++orig_iov_loc].iov_len;
-
- pr_debug("rx_data: #4 new_rx_marker"
- " %u, size %u\n", *rx_marker, size);
- }
- }
- data += (rx_marker_iov * (MARKER_SIZE / 2));
-
- iov_p = &iov[0];
- iov_len = iov_count;
-
- if (iov_count > count->ss_iov_count) {
- pr_err("iov_count: %d, count->ss_iov_count:"
- " %d\n", iov_count, count->ss_iov_count);
- return -1;
- }
- if (rx_marker_iov > count->ss_marker_count) {
- pr_err("rx_marker_iov: %d, count->ss_marker"
- "_count: %d\n", rx_marker_iov,
- count->ss_marker_count);
- return -1;
- }
- } else {
- iov_p = count->iov;
- iov_len = count->iov_count;
- }
+ iov_p = count->iov;
+ iov_len = count->iov_count;
while (total_rx < data) {
rx_loop = kernel_recvmsg(conn->sock, &msg, iov_p, iov_len,
rx_loop, total_rx, data);
}
- if (count->sync_and_steering) {
- int j;
- for (j = 0; j < rx_marker_iov; j++) {
- pr_debug("rx_data: #5 j: %d, offset: %d\n",
- j, rx_marker_val[j]);
- conn->of_marker_offset = rx_marker_val[j];
- }
- total_rx -= (rx_marker_iov * (MARKER_SIZE / 2));
- }
-
return total_rx;
}
struct iscsi_data_count *count)
{
int data = count->data_length, total_tx = 0, tx_loop = 0, iov_len;
- u32 tx_marker_val[count->ss_marker_count], tx_marker_iov = 0;
- struct kvec iov[count->ss_iov_count], *iov_p;
+ struct kvec *iov_p;
struct msghdr msg;
if (!conn || !conn->sock || !conn->conn_ops)
memset(&msg, 0, sizeof(struct msghdr));
- if (count->sync_and_steering) {
- int size = 0;
- u32 i, orig_iov_count = 0;
- u32 orig_iov_len = 0, orig_iov_loc = 0;
- u32 iov_count = 0, per_iov_bytes = 0;
- u32 *tx_marker, old_tx_marker = 0;
- struct kvec *iov_record;
-
- memset(&tx_marker_val, 0,
- count->ss_marker_count * sizeof(u32));
- memset(&iov, 0, count->ss_iov_count * sizeof(struct kvec));
-
- iov_record = count->iov;
- orig_iov_count = count->iov_count;
- tx_marker = &conn->if_marker;
-
- i = 0;
- size = data;
- orig_iov_len = iov_record[orig_iov_loc].iov_len;
- while (size > 0) {
- pr_debug("tx_data: #1 orig_iov_len %u,"
- " orig_iov_loc %u\n", orig_iov_len, orig_iov_loc);
- pr_debug("tx_data: #2 tx_marker %u, size"
- " %u\n", *tx_marker, size);
-
- if (orig_iov_len >= *tx_marker) {
- iov[iov_count].iov_len = *tx_marker;
- iov[iov_count++].iov_base =
- (iov_record[orig_iov_loc].iov_base +
- per_iov_bytes);
-
- tx_marker_val[tx_marker_iov] =
- (size - *tx_marker);
- iov[iov_count].iov_len = (MARKER_SIZE / 2);
- iov[iov_count++].iov_base =
- &tx_marker_val[tx_marker_iov++];
- iov[iov_count].iov_len = (MARKER_SIZE / 2);
- iov[iov_count++].iov_base =
- &tx_marker_val[tx_marker_iov++];
- old_tx_marker = *tx_marker;
-
- /*
- * IFMarkInt is in 32-bit words.
- */
- *tx_marker = (conn->conn_ops->IFMarkInt * 4);
- size -= old_tx_marker;
- orig_iov_len -= old_tx_marker;
- per_iov_bytes += old_tx_marker;
-
- pr_debug("tx_data: #3 new_tx_marker"
- " %u, size %u\n", *tx_marker, size);
- pr_debug("tx_data: #4 offset %u\n",
- tx_marker_val[tx_marker_iov-1]);
- } else {
- iov[iov_count].iov_len = orig_iov_len;
- iov[iov_count++].iov_base
- = (iov_record[orig_iov_loc].iov_base +
- per_iov_bytes);
-
- per_iov_bytes = 0;
- *tx_marker -= orig_iov_len;
- size -= orig_iov_len;
-
- if (size)
- orig_iov_len =
- iov_record[++orig_iov_loc].iov_len;
-
- pr_debug("tx_data: #5 new_tx_marker"
- " %u, size %u\n", *tx_marker, size);
- }
- }
-
- data += (tx_marker_iov * (MARKER_SIZE / 2));
-
- iov_p = &iov[0];
- iov_len = iov_count;
-
- if (iov_count > count->ss_iov_count) {
- pr_err("iov_count: %d, count->ss_iov_count:"
- " %d\n", iov_count, count->ss_iov_count);
- return -1;
- }
- if (tx_marker_iov > count->ss_marker_count) {
- pr_err("tx_marker_iov: %d, count->ss_marker"
- "_count: %d\n", tx_marker_iov,
- count->ss_marker_count);
- return -1;
- }
- } else {
- iov_p = count->iov;
- iov_len = count->iov_count;
- }
+ iov_p = count->iov;
+ iov_len = count->iov_count;
while (total_tx < data) {
tx_loop = kernel_sendmsg(conn->sock, &msg, iov_p, iov_len,
tx_loop, total_tx, data);
}
- if (count->sync_and_steering)
- total_tx -= (tx_marker_iov * (MARKER_SIZE / 2));
-
return total_tx;
}
c.data_length = data;
c.type = ISCSI_RX_DATA;
- if (conn->conn_ops->OFMarker &&
- (conn->conn_state >= TARG_CONN_STATE_LOGGED_IN)) {
- if (iscsit_determine_sync_and_steering_counts(conn, &c) < 0)
- return -1;
- }
-
return iscsit_do_rx_data(conn, &c);
}
c.data_length = data;
c.type = ISCSI_TX_DATA;
- if (conn->conn_ops->IFMarker &&
- (conn->conn_state >= TARG_CONN_STATE_LOGGED_IN)) {
- if (iscsit_determine_sync_and_steering_counts(conn, &c) < 0)
- return -1;
- }
-
return iscsit_do_tx_data(conn, &c);
}
*/
#include <linux/kernel.h>
+#include <linux/ctype.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
{
struct se_lun *lun = cmd->se_lun;
struct se_device *dev = cmd->se_dev;
+ struct se_portal_group *tpg = lun->lun_sep->sep_tpg;
unsigned char *buf;
/*
buf = transport_kmap_first_data_page(cmd);
- buf[0] = dev->transport->get_device_type(dev);
- if (buf[0] == TYPE_TAPE)
- buf[1] = 0x80;
+ if (dev == tpg->tpg_virt_lun0.lun_se_dev) {
+ buf[0] = 0x3f; /* Not connected */
+ } else {
+ buf[0] = dev->transport->get_device_type(dev);
+ if (buf[0] == TYPE_TAPE)
+ buf[1] = 0x80;
+ }
buf[2] = dev->transport->get_device_rev(dev);
/*
return 0;
}
+static void
+target_parse_naa_6h_vendor_specific(struct se_device *dev, unsigned char *buf_off)
+{
+ unsigned char *p = &dev->se_sub_dev->t10_wwn.unit_serial[0];
+ unsigned char *buf = buf_off;
+ int cnt = 0, next = 1;
+ /*
+ * Generate up to 36 bits of VENDOR SPECIFIC IDENTIFIER starting on
+ * byte 3 bit 3-0 for NAA IEEE Registered Extended DESIGNATOR field
+ * format, followed by 64 bits of VENDOR SPECIFIC IDENTIFIER EXTENSION
+ * to complete the payload. These are based from VPD=0x80 PRODUCT SERIAL
+ * NUMBER set via vpd_unit_serial in target_core_configfs.c to ensure
+ * per device uniqeness.
+ */
+ while (*p != '\0') {
+ if (cnt >= 13)
+ break;
+ if (!isxdigit(*p)) {
+ p++;
+ continue;
+ }
+ if (next != 0) {
+ buf[cnt++] |= hex_to_bin(*p++);
+ next = 0;
+ } else {
+ buf[cnt] = hex_to_bin(*p++) << 4;
+ next = 1;
+ }
+ }
+}
+
/*
* Device identification VPD, for a complete list of
* DESIGNATOR TYPEs see spc4r17 Table 459.
* VENDOR_SPECIFIC_IDENTIFIER and
* VENDOR_SPECIFIC_IDENTIFIER_EXTENTION
*/
- buf[off++] |= hex_to_bin(dev->se_sub_dev->t10_wwn.unit_serial[0]);
- hex2bin(&buf[off], &dev->se_sub_dev->t10_wwn.unit_serial[1], 12);
+ target_parse_naa_6h_vendor_specific(dev, &buf[off]);
len = 20;
off = (len + 4);
length += target_modesense_control(dev, &buf[offset+length]);
break;
default:
- pr_err("Got Unknown Mode Page: 0x%02x\n",
- cdb[2] & 0x3f);
+ pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n",
+ cdb[2] & 0x3f, cdb[3]);
return PYX_TRANSPORT_UNKNOWN_MODE_PAGE;
}
offset += length;
size -= 16;
}
- task->task_scsi_status = GOOD;
- transport_complete_task(task, 1);
err:
transport_kunmap_first_data_page(cmd);
* Note this is not used for TCM/pSCSI passthrough
*/
static int
-target_emulate_write_same(struct se_task *task, int write_same32)
+target_emulate_write_same(struct se_task *task, u32 num_blocks)
{
struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
sector_t range;
sector_t lba = cmd->t_task_lba;
- unsigned int num_blocks;
int ret;
/*
- * Extract num_blocks from the WRITE_SAME_* CDB. Then use the explict
- * range when non zero is supplied, otherwise calculate the remaining
- * range based on ->get_blocks() - starting LBA.
+ * Use the explicit range when non zero is supplied, otherwise calculate
+ * the remaining range based on ->get_blocks() - starting LBA.
*/
- if (write_same32)
- num_blocks = get_unaligned_be32(&cmd->t_task_cdb[28]);
- else
- num_blocks = get_unaligned_be32(&cmd->t_task_cdb[10]);
-
if (num_blocks != 0)
range = num_blocks;
else
return ret;
}
- task->task_scsi_status = GOOD;
- transport_complete_task(task, 1);
return 0;
}
}
ret = target_emulate_unmap(task);
break;
+ case WRITE_SAME:
+ if (!dev->transport->do_discard) {
+ pr_err("WRITE_SAME emulation not supported"
+ " for: %s\n", dev->transport->name);
+ return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
+ }
+ ret = target_emulate_write_same(task,
+ get_unaligned_be16(&cmd->t_task_cdb[7]));
+ break;
case WRITE_SAME_16:
if (!dev->transport->do_discard) {
pr_err("WRITE_SAME_16 emulation not supported"
" for: %s\n", dev->transport->name);
return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
}
- ret = target_emulate_write_same(task, 0);
+ ret = target_emulate_write_same(task,
+ get_unaligned_be32(&cmd->t_task_cdb[10]));
break;
case VARIABLE_LENGTH_CMD:
service_action =
dev->transport->name);
return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
}
- ret = target_emulate_write_same(task, 1);
+ ret = target_emulate_write_same(task,
+ get_unaligned_be32(&cmd->t_task_cdb[28]));
break;
default:
pr_err("Unsupported VARIABLE_LENGTH_CMD SA:"
if (ret < 0)
return ret;
- task->task_scsi_status = GOOD;
- transport_complete_task(task, 1);
+ /*
+ * Handle the successful completion here unless a caller
+ * has explictly requested an asychronous completion.
+ */
+ if (!(cmd->se_cmd_flags & SCF_EMULATE_CDB_ASYNC)) {
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
+ }
return PYX_TRANSPORT_SENT_TO_TRANSPORT;
}
struct se_dev_entry *deve;
u32 i;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
list_for_each_entry(nacl, &tpg->acl_node_list, acl_list) {
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
spin_lock_irq(&nacl->device_list_lock);
for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) {
}
spin_unlock_irq(&nacl->device_list_lock);
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
}
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
}
static struct se_port *core_alloc_port(struct se_device *dev)
return ret;
}
+u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size)
+{
+ u32 tmp, aligned_max_sectors;
+ /*
+ * Limit max_sectors to a PAGE_SIZE aligned value for modern
+ * transport_allocate_data_tasks() operation.
+ */
+ tmp = rounddown((max_sectors * block_size), PAGE_SIZE);
+ aligned_max_sectors = (tmp / block_size);
+ if (max_sectors != aligned_max_sectors) {
+ printk(KERN_INFO "Rounding down aligned max_sectors from %u"
+ " to %u\n", max_sectors, aligned_max_sectors);
+ return aligned_max_sectors;
+ }
+
+ return max_sectors;
+}
+
void se_dev_set_default_attribs(
struct se_device *dev,
struct se_dev_limits *dev_limits)
* max_sectors is based on subsystem plugin dependent requirements.
*/
dev->se_sub_dev->se_dev_attrib.hw_max_sectors = limits->max_hw_sectors;
+ /*
+ * Align max_sectors down to PAGE_SIZE to follow transport_allocate_data_tasks()
+ */
+ limits->max_sectors = se_dev_align_max_sectors(limits->max_sectors,
+ limits->logical_block_size);
dev->se_sub_dev->se_dev_attrib.max_sectors = limits->max_sectors;
/*
* Set optimal_sectors from max_sectors, which can be lowered via
return -EINVAL;
}
}
+ /*
+ * Align max_sectors down to PAGE_SIZE to follow transport_allocate_data_tasks()
+ */
+ max_sectors = se_dev_align_max_sectors(max_sectors,
+ dev->se_sub_dev->se_dev_attrib.block_size);
dev->se_sub_dev->se_dev_attrib.max_sectors = max_sectors;
pr_debug("dev[%p]: SE Device max_sectors changed to %u\n",
*/
if (tpg->se_tpg_tfo->tpg_check_demo_mode(tpg)) {
struct se_node_acl *acl;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
list_for_each_entry(acl, &tpg->acl_node_list, acl_list) {
- if (acl->dynamic_node_acl) {
- spin_unlock_bh(&tpg->acl_node_lock);
+ if (acl->dynamic_node_acl &&
+ (!tpg->se_tpg_tfo->tpg_check_demo_mode_login_only ||
+ !tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg))) {
+ spin_unlock_irq(&tpg->acl_node_lock);
core_tpg_add_node_to_devs(acl, tpg);
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
}
}
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
}
return lun_p;
se_nacl = tf->tf_ops.fabric_make_nodeacl(se_tpg, group, name);
if (IS_ERR(se_nacl))
- return ERR_PTR(PTR_ERR(se_nacl));
+ return ERR_CAST(se_nacl);
nacl_cg = &se_nacl->acl_group;
nacl_cg->default_groups = se_nacl->acl_default_groups;
* from the decoded fabric module specific TransportID
* at *i_str.
*/
- spin_lock_bh(&tmp_tpg->acl_node_lock);
+ spin_lock_irq(&tmp_tpg->acl_node_lock);
dest_node_acl = __core_tpg_get_initiator_node_acl(
tmp_tpg, i_str);
if (dest_node_acl) {
atomic_inc(&dest_node_acl->acl_pr_ref_count);
smp_mb__after_atomic_inc();
}
- spin_unlock_bh(&tmp_tpg->acl_node_lock);
+ spin_unlock_irq(&tmp_tpg->acl_node_lock);
if (!dest_node_acl) {
core_scsi3_tpg_undepend_item(tmp_tpg);
/*
* Locate the destination struct se_node_acl from the received Transport ID
*/
- spin_lock_bh(&dest_se_tpg->acl_node_lock);
+ spin_lock_irq(&dest_se_tpg->acl_node_lock);
dest_node_acl = __core_tpg_get_initiator_node_acl(dest_se_tpg,
initiator_str);
if (dest_node_acl) {
atomic_inc(&dest_node_acl->acl_pr_ref_count);
smp_mb__after_atomic_inc();
}
- spin_unlock_bh(&dest_se_tpg->acl_node_lock);
+ spin_unlock_irq(&dest_se_tpg->acl_node_lock);
if (!dest_node_acl) {
pr_err("Unable to locate %s dest_node_acl for"
length = req->rd_size;
dst = sg_virt(&sg_d[i++]) + dst_offset;
- if (!dst)
- BUG();
+ BUG_ON(!dst);
src = sg_virt(&sg_s[j]) + src_offset;
- if (!src)
- BUG();
+ BUG_ON(!src);
dst_offset = 0;
src_offset = length;
length = req->rd_size;
dst = sg_virt(&sg_d[i]) + dst_offset;
- if (!dst)
- BUG();
+ BUG_ON(!dst);
if (sg_d[i].length == length) {
i++;
dst_offset = length;
src = sg_virt(&sg_s[j++]) + src_offset;
- if (!src)
- BUG();
+ BUG_ON(!src);
src_offset = 0;
page_end = 1;
length = req->rd_size;
src = sg_virt(&sg_s[i++]) + src_offset;
- if (!src)
- BUG();
+ BUG_ON(!src);
dst = sg_virt(&sg_d[j]) + dst_offset;
- if (!dst)
- BUG();
+ BUG_ON(!dst);
src_offset = 0;
dst_offset = length;
length = req->rd_size;
src = sg_virt(&sg_s[i]) + src_offset;
- if (!src)
- BUG();
+ BUG_ON(!src);
if (sg_s[i].length == length) {
i++;
src_offset = length;
dst = sg_virt(&sg_d[j++]) + dst_offset;
- if (!dst)
- BUG();
+ BUG_ON(!dst);
dst_offset = 0;
page_end = 1;
{
struct se_node_acl *acl;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
list_for_each_entry(acl, &tpg->acl_node_list, acl_list) {
if (!strcmp(acl->initiatorname, initiatorname) &&
!acl->dynamic_node_acl) {
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return acl;
}
}
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return NULL;
}
tpg->se_tpg_tfo->tpg_release_fabric_acl(tpg, acl);
return NULL;
}
+ /*
+ * Here we only create demo-mode MappedLUNs from the active
+ * TPG LUNs if the fabric is not explictly asking for
+ * tpg_check_demo_mode_login_only() == 1.
+ */
+ if ((tpg->se_tpg_tfo->tpg_check_demo_mode_login_only != NULL) &&
+ (tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg) == 1))
+ do { ; } while (0);
+ else
+ core_tpg_add_node_to_devs(acl, tpg);
- core_tpg_add_node_to_devs(acl, tpg);
-
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
list_add_tail(&acl->acl_list, &tpg->acl_node_list);
tpg->num_node_acls++;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
pr_debug("%s_TPG[%u] - Added DYNAMIC ACL with TCQ Depth: %d for %s"
" Initiator Node: %s\n", tpg->se_tpg_tfo->get_fabric_name(),
{
struct se_node_acl *acl = NULL;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname);
if (acl) {
if (acl->dynamic_node_acl) {
pr_debug("%s_TPG[%u] - Replacing dynamic ACL"
" for %s\n", tpg->se_tpg_tfo->get_fabric_name(),
tpg->se_tpg_tfo->tpg_get_tag(tpg), initiatorname);
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
/*
* Release the locally allocated struct se_node_acl
* because * core_tpg_add_initiator_node_acl() returned
" Node %s already exists for TPG %u, ignoring"
" request.\n", tpg->se_tpg_tfo->get_fabric_name(),
initiatorname, tpg->se_tpg_tfo->tpg_get_tag(tpg));
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return ERR_PTR(-EEXIST);
}
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
if (!se_nacl) {
pr_err("struct se_node_acl pointer is NULL\n");
return ERR_PTR(-EINVAL);
}
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
list_add_tail(&acl->acl_list, &tpg->acl_node_list);
tpg->num_node_acls++;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
done:
pr_debug("%s_TPG[%hu] - Added ACL with TCQ Depth: %d for %s"
struct se_session *sess, *sess_tmp;
int dynamic_acl = 0;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
if (acl->dynamic_node_acl) {
acl->dynamic_node_acl = 0;
dynamic_acl = 1;
}
list_del(&acl->acl_list);
tpg->num_node_acls--;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
spin_lock_bh(&tpg->session_lock);
list_for_each_entry_safe(sess, sess_tmp,
struct se_node_acl *acl;
int dynamic_acl = 0;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname);
if (!acl) {
pr_err("Access Control List entry for %s Initiator"
" Node %s does not exists for TPG %hu, ignoring"
" request.\n", tpg->se_tpg_tfo->get_fabric_name(),
initiatorname, tpg->se_tpg_tfo->tpg_get_tag(tpg));
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return -ENODEV;
}
if (acl->dynamic_node_acl) {
acl->dynamic_node_acl = 0;
dynamic_acl = 1;
}
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
spin_lock_bh(&tpg->session_lock);
list_for_each_entry(sess, &tpg->tpg_sess_list, sess_list) {
tpg->se_tpg_tfo->get_fabric_name(), initiatorname);
spin_unlock_bh(&tpg->session_lock);
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
if (dynamic_acl)
acl->dynamic_node_acl = 1;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return -EEXIST;
}
/*
if (init_sess)
tpg->se_tpg_tfo->close_session(init_sess);
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
if (dynamic_acl)
acl->dynamic_node_acl = 1;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return -EINVAL;
}
spin_unlock_bh(&tpg->session_lock);
initiatorname, tpg->se_tpg_tfo->get_fabric_name(),
tpg->se_tpg_tfo->tpg_get_tag(tpg));
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
if (dynamic_acl)
acl->dynamic_node_acl = 1;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return 0;
}
* not been released because of TFO->tpg_check_demo_mode_cache() == 1
* in transport_deregister_session().
*/
- spin_lock_bh(&se_tpg->acl_node_lock);
+ spin_lock_irq(&se_tpg->acl_node_lock);
list_for_each_entry_safe(nacl, nacl_tmp, &se_tpg->acl_node_list,
acl_list) {
list_del(&nacl->acl_list);
se_tpg->num_node_acls--;
- spin_unlock_bh(&se_tpg->acl_node_lock);
+ spin_unlock_irq(&se_tpg->acl_node_lock);
core_tpg_wait_for_nacl_pr_ref(nacl);
core_free_device_list_for_node(nacl, se_tpg);
se_tpg->se_tpg_tfo->tpg_release_fabric_acl(se_tpg, nacl);
- spin_lock_bh(&se_tpg->acl_node_lock);
+ spin_lock_irq(&se_tpg->acl_node_lock);
}
- spin_unlock_bh(&se_tpg->acl_node_lock);
+ spin_unlock_irq(&se_tpg->acl_node_lock);
if (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL)
core_tpg_release_virtual_lun0(se_tpg);
{
struct se_portal_group *se_tpg = se_sess->se_tpg;
struct se_node_acl *se_nacl;
+ unsigned long flags;
if (!se_tpg) {
transport_free_session(se_sess);
return;
}
- spin_lock_bh(&se_tpg->session_lock);
+ spin_lock_irqsave(&se_tpg->session_lock, flags);
list_del(&se_sess->sess_list);
se_sess->se_tpg = NULL;
se_sess->fabric_sess_ptr = NULL;
- spin_unlock_bh(&se_tpg->session_lock);
+ spin_unlock_irqrestore(&se_tpg->session_lock, flags);
/*
* Determine if we need to do extra work for this initiator node's
*/
se_nacl = se_sess->se_node_acl;
if (se_nacl) {
- spin_lock_bh(&se_tpg->acl_node_lock);
+ spin_lock_irqsave(&se_tpg->acl_node_lock, flags);
if (se_nacl->dynamic_node_acl) {
if (!se_tpg->se_tpg_tfo->tpg_check_demo_mode_cache(
se_tpg)) {
list_del(&se_nacl->acl_list);
se_tpg->num_node_acls--;
- spin_unlock_bh(&se_tpg->acl_node_lock);
+ spin_unlock_irqrestore(&se_tpg->acl_node_lock, flags);
core_tpg_wait_for_nacl_pr_ref(se_nacl);
core_free_device_list_for_node(se_nacl, se_tpg);
se_tpg->se_tpg_tfo->tpg_release_fabric_acl(se_tpg,
se_nacl);
- spin_lock_bh(&se_tpg->acl_node_lock);
+ spin_lock_irqsave(&se_tpg->acl_node_lock, flags);
}
}
- spin_unlock_bh(&se_tpg->acl_node_lock);
+ spin_unlock_irqrestore(&se_tpg->acl_node_lock, flags);
}
transport_free_session(se_sess);
{
struct se_device *dev = container_of(work, struct se_device,
qf_work_queue);
+ LIST_HEAD(qf_cmd_list);
struct se_cmd *cmd, *cmd_tmp;
spin_lock_irq(&dev->qf_cmd_lock);
- list_for_each_entry_safe(cmd, cmd_tmp, &dev->qf_cmd_list, se_qf_node) {
+ list_splice_init(&dev->qf_cmd_list, &qf_cmd_list);
+ spin_unlock_irq(&dev->qf_cmd_lock);
+ list_for_each_entry_safe(cmd, cmd_tmp, &qf_cmd_list, se_qf_node) {
list_del(&cmd->se_qf_node);
atomic_dec(&dev->dev_qf_count);
smp_mb__after_atomic_dec();
- spin_unlock_irq(&dev->qf_cmd_lock);
pr_debug("Processing %s cmd: %p QUEUE_FULL in work queue"
" context: %s\n", cmd->se_tfo->get_fabric_name(), cmd,
* has been added to head of queue
*/
transport_add_cmd_to_queue(cmd, cmd->t_state);
-
- spin_lock_irq(&dev->qf_cmd_lock);
}
- spin_unlock_irq(&dev->qf_cmd_lock);
}
unsigned char *transport_dump_cmd_direction(struct se_cmd *cmd)
cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
break;
}
-
- if (!sc)
+ /*
+ * If a fabric does not define a cmd->se_tfo->new_cmd_map caller,
+ * make the call to transport_send_check_condition_and_sense()
+ * directly. Otherwise expect the fabric to make the call to
+ * transport_send_check_condition_and_sense() after handling
+ * possible unsoliticied write data payloads.
+ */
+ if (!sc && !cmd->se_tfo->new_cmd_map)
transport_new_cmd_failure(cmd);
else {
ret = transport_send_check_condition_and_sense(cmd,
" transport_dev_end_lba(): %llu\n",
cmd->t_task_lba, sectors,
transport_dev_end_lba(dev));
- pr_err(" We should return CHECK_CONDITION"
- " but we don't yet\n");
- return 0;
+ return -EINVAL;
}
- return sectors;
+ return 0;
+}
+
+static int target_check_write_same_discard(unsigned char *flags, struct se_device *dev)
+{
+ /*
+ * Determine if the received WRITE_SAME is used to for direct
+ * passthrough into Linux/SCSI with struct request via TCM/pSCSI
+ * or we are signaling the use of internal WRITE_SAME + UNMAP=1
+ * emulation for -> Linux/BLOCK disbard with TCM/IBLOCK code.
+ */
+ int passthrough = (dev->transport->transport_type ==
+ TRANSPORT_PLUGIN_PHBA_PDEV);
+
+ if (!passthrough) {
+ if ((flags[0] & 0x04) || (flags[0] & 0x02)) {
+ pr_err("WRITE_SAME PBDATA and LBDATA"
+ " bits not supported for Block Discard"
+ " Emulation\n");
+ return -ENOSYS;
+ }
+ /*
+ * Currently for the emulated case we only accept
+ * tpws with the UNMAP=1 bit set.
+ */
+ if (!(flags[0] & 0x08)) {
+ pr_err("WRITE_SAME w/o UNMAP bit not"
+ " supported for Block Discard Emulation\n");
+ return -ENOSYS;
+ }
+ }
+
+ return 0;
}
/* transport_generic_cmd_sequencer():
goto out_unsupported_cdb;
if (sectors)
- size = transport_get_size(sectors, cdb, cmd);
+ size = transport_get_size(1, cdb, cmd);
else {
pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not"
" supported\n");
cmd->t_task_lba = get_unaligned_be64(&cdb[12]);
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- /*
- * Skip the remaining assignments for TCM/PSCSI passthrough
- */
- if (passthrough)
- break;
-
- if ((cdb[10] & 0x04) || (cdb[10] & 0x02)) {
- pr_err("WRITE_SAME PBDATA and LBDATA"
- " bits not supported for Block Discard"
- " Emulation\n");
+ if (target_check_write_same_discard(&cdb[10], dev) < 0)
goto out_invalid_cdb_field;
- }
- /*
- * Currently for the emulated case we only accept
- * tpws with the UNMAP=1 bit set.
- */
- if (!(cdb[10] & 0x08)) {
- pr_err("WRITE_SAME w/o UNMAP bit not"
- " supported for Block Discard Emulation\n");
- goto out_invalid_cdb_field;
- }
+
break;
default:
pr_err("VARIABLE_LENGTH_CMD service action"
cmd->se_cmd_flags |= SCF_EMULATE_CDB_ASYNC;
/*
* Check to ensure that LBA + Range does not exceed past end of
- * device.
+ * device for IBLOCK and FILEIO ->do_sync_cache() backend calls
*/
- if (!transport_cmd_get_valid_sectors(cmd))
- goto out_invalid_cdb_field;
+ if ((cmd->t_task_lba != 0) || (sectors != 0)) {
+ if (transport_cmd_get_valid_sectors(cmd) < 0)
+ goto out_invalid_cdb_field;
+ }
break;
case UNMAP:
size = get_unaligned_be16(&cdb[7]);
goto out_unsupported_cdb;
if (sectors)
- size = transport_get_size(sectors, cdb, cmd);
+ size = transport_get_size(1, cdb, cmd);
else {
pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n");
goto out_invalid_cdb_field;
}
cmd->t_task_lba = get_unaligned_be64(&cdb[2]);
- passthrough = (dev->transport->transport_type ==
- TRANSPORT_PLUGIN_PHBA_PDEV);
- /*
- * Determine if the received WRITE_SAME_16 is used to for direct
- * passthrough into Linux/SCSI with struct request via TCM/pSCSI
- * or we are signaling the use of internal WRITE_SAME + UNMAP=1
- * emulation for -> Linux/BLOCK disbard with TCM/IBLOCK and
- * TCM/FILEIO subsystem plugin backstores.
- */
- if (!passthrough) {
- if ((cdb[1] & 0x04) || (cdb[1] & 0x02)) {
- pr_err("WRITE_SAME PBDATA and LBDATA"
- " bits not supported for Block Discard"
- " Emulation\n");
- goto out_invalid_cdb_field;
- }
- /*
- * Currently for the emulated case we only accept
- * tpws with the UNMAP=1 bit set.
- */
- if (!(cdb[1] & 0x08)) {
- pr_err("WRITE_SAME w/o UNMAP bit not "
- " supported for Block Discard Emulation\n");
- goto out_invalid_cdb_field;
- }
+ cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+
+ if (target_check_write_same_discard(&cdb[1], dev) < 0)
+ goto out_invalid_cdb_field;
+ break;
+ case WRITE_SAME:
+ sectors = transport_get_sectors_10(cdb, cmd, §or_ret);
+ if (sector_ret)
+ goto out_unsupported_cdb;
+
+ if (sectors)
+ size = transport_get_size(1, cdb, cmd);
+ else {
+ pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n");
+ goto out_invalid_cdb_field;
}
+
+ cmd->t_task_lba = get_unaligned_be32(&cdb[2]);
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ /*
+ * Follow sbcr26 with WRITE_SAME (10) and check for the existence
+ * of byte 1 bit 3 UNMAP instead of original reserved field
+ */
+ if (target_check_write_same_discard(&cdb[1], dev) < 0)
+ goto out_invalid_cdb_field;
break;
case ALLOW_MEDIUM_REMOVAL:
case GPCMD_CLOSE_TRACK:
static int transport_new_cmd_obj(struct se_cmd *cmd)
{
struct se_device *dev = cmd->se_dev;
- u32 task_cdbs;
- u32 rc;
- int set_counts = 1;
+ int set_counts = 1, rc, task_cdbs;
/*
* Setup any BIDI READ tasks and memory from
cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
cmd->scsi_sense_reason =
TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- return PYX_TRANSPORT_LU_COMM_FAILURE;
+ return -EINVAL;
}
atomic_inc(&cmd->t_fe_count);
atomic_inc(&cmd->t_se_count);
cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
cmd->scsi_sense_reason =
TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- return PYX_TRANSPORT_LU_COMM_FAILURE;
+ return -EINVAL;
}
if (set_counts) {
if (!task->task_sg)
continue;
- BUG_ON(!task->task_padded_sg);
-
if (!sg_first) {
sg_first = task->task_sg;
chained_nents = task->task_sg_nents;
sg_chain(sg_prev, sg_prev_nents, task->task_sg);
chained_nents += task->task_sg_nents;
}
+ /*
+ * For the padded tasks, use the extra SGL vector allocated
+ * in transport_allocate_data_tasks() for the sg_prev_nents
+ * offset into sg_chain() above.. The last task of a
+ * multi-task list, or a single task will not have
+ * task->task_sg_padded set..
+ */
+ if (task->task_padded_sg)
+ sg_prev_nents = (task->task_sg_nents + 1);
+ else
+ sg_prev_nents = task->task_sg_nents;
sg_prev = task->task_sg;
- sg_prev_nents = task->task_sg_nents;
}
/*
* Setup the starting pointer and total t_tasks_sg_linked_no including
cmd_sg = sgl;
for (i = 0; i < task_count; i++) {
- unsigned int task_size;
+ unsigned int task_size, task_sg_nents_padded;
int count;
task = transport_generic_get_task(cmd, data_direction);
/* Update new cdb with updated lba/sectors */
cmd->transport_split_cdb(task->task_lba, task->task_sectors, cdb);
-
+ /*
+ * This now assumes that passed sg_ents are in PAGE_SIZE chunks
+ * in order to calculate the number per task SGL entries
+ */
+ task->task_sg_nents = DIV_ROUND_UP(task->task_size, PAGE_SIZE);
/*
* Check if the fabric module driver is requesting that all
* struct se_task->task_sg[] be chained together.. If so,
* then allocate an extra padding SG entry for linking and
- * marking the end of the chained SGL.
- * Possibly over-allocate task sgl size by using cmd sgl size.
- * It's so much easier and only a waste when task_count > 1.
- * That is extremely rare.
+ * marking the end of the chained SGL for every task except
+ * the last one for (task_count > 1) operation, or skipping
+ * the extra padding for the (task_count == 1) case.
*/
- task->task_sg_nents = sgl_nents;
- if (cmd->se_tfo->task_sg_chaining) {
- task->task_sg_nents++;
+ if (cmd->se_tfo->task_sg_chaining && (i < (task_count - 1))) {
+ task_sg_nents_padded = (task->task_sg_nents + 1);
task->task_padded_sg = 1;
- }
+ } else
+ task_sg_nents_padded = task->task_sg_nents;
task->task_sg = kmalloc(sizeof(struct scatterlist) *
- task->task_sg_nents, GFP_KERNEL);
+ task_sg_nents_padded, GFP_KERNEL);
if (!task->task_sg) {
cmd->se_dev->transport->free_task(task);
return -ENOMEM;
}
- sg_init_table(task->task_sg, task->task_sg_nents);
+ sg_init_table(task->task_sg, task_sg_nents_padded);
task_size = task->task_size;
struct scatterlist *sgl,
unsigned int sgl_nents)
{
- if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)
+ if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) {
+ if (transport_cmd_get_valid_sectors(cmd) < 0)
+ return -EINVAL;
+
return transport_allocate_data_tasks(cmd, lba, data_direction,
sgl, sgl_nents);
- else
+ } else
return transport_allocate_control_task(cmd);
}
*/
switch (reason) {
case TCM_NON_EXISTENT_LUN:
+ /* CURRENT ERROR */
+ buffer[offset] = 0x70;
+ /* ILLEGAL REQUEST */
+ buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
+ /* LOGICAL UNIT NOT SUPPORTED */
+ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x25;
+ break;
case TCM_UNSUPPORTED_SCSI_OPCODE:
case TCM_SECTOR_COUNT_TOO_MANY:
/* CURRENT ERROR */
struct list_head list; /* linkage in ft_lport_acl tpg_list */
struct list_head lun_list; /* head of LUNs */
struct se_portal_group se_tpg;
- struct task_struct *thread; /* processing thread */
- struct se_queue_obj qobj; /* queue for processing thread */
+ struct workqueue_struct *workqueue;
};
struct ft_lport_acl {
struct se_wwn fc_lport_wwn;
};
-enum ft_cmd_state {
- FC_CMD_ST_NEW = 0,
- FC_CMD_ST_REJ
-};
-
/*
* Commands
*/
struct ft_cmd {
- enum ft_cmd_state state;
u32 lun; /* LUN from request */
struct ft_sess *sess; /* session held for cmd */
struct fc_seq *seq; /* sequence in exchange mgr */
struct fc_frame *req_frame;
unsigned char *cdb; /* pointer to CDB inside frame */
u32 write_data_len; /* data received on writes */
- struct se_queue_req se_req;
+ struct work_struct work;
/* Local sense buffer */
unsigned char ft_sense_buffer[TRANSPORT_SENSE_BUFFER];
u32 was_ddp_setup:1; /* Set only if ddp is setup */
/*
* other internal functions.
*/
-int ft_thread(void *);
void ft_recv_req(struct ft_sess *, struct fc_frame *);
struct ft_tpg *ft_lport_find_tpg(struct fc_lport *);
struct ft_node_acl *ft_acl_get(struct ft_tpg *, struct fc_rport_priv *);
int count;
se_cmd = &cmd->se_cmd;
- pr_debug("%s: cmd %p state %d sess %p seq %p se_cmd %p\n",
- caller, cmd, cmd->state, cmd->sess, cmd->seq, se_cmd);
+ pr_debug("%s: cmd %p sess %p seq %p se_cmd %p\n",
+ caller, cmd, cmd->sess, cmd->seq, se_cmd);
pr_debug("%s: cmd %p cdb %p\n",
caller, cmd, cmd->cdb);
pr_debug("%s: cmd %p lun %d\n", caller, cmd, cmd->lun);
16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0);
}
-static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd)
-{
- struct ft_tpg *tpg = sess->tport->tpg;
- struct se_queue_obj *qobj = &tpg->qobj;
- unsigned long flags;
-
- qobj = &sess->tport->tpg->qobj;
- spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
- list_add_tail(&cmd->se_req.qr_list, &qobj->qobj_list);
- atomic_inc(&qobj->queue_cnt);
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
-
- wake_up_process(tpg->thread);
-}
-
-static struct ft_cmd *ft_dequeue_cmd(struct se_queue_obj *qobj)
-{
- unsigned long flags;
- struct se_queue_req *qr;
-
- spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
- if (list_empty(&qobj->qobj_list)) {
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
- return NULL;
- }
- qr = list_first_entry(&qobj->qobj_list, struct se_queue_req, qr_list);
- list_del(&qr->qr_list);
- atomic_dec(&qobj->queue_cnt);
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
- return container_of(qr, struct ft_cmd, se_req);
-}
-
static void ft_free_cmd(struct ft_cmd *cmd)
{
struct fc_frame *fp;
int ft_get_cmd_state(struct se_cmd *se_cmd)
{
- struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
-
- return cmd->state;
+ return 0;
}
int ft_is_state_remove(struct se_cmd *se_cmd)
return 0;
}
+static void ft_send_work(struct work_struct *work);
+
/*
* Handle incoming FCP command.
*/
goto busy;
}
cmd->req_frame = fp; /* hold frame during cmd */
- ft_queue_cmd(sess, cmd);
+
+ INIT_WORK(&cmd->work, ft_send_work);
+ queue_work(sess->tport->tpg->workqueue, &cmd->work);
return;
busy:
/*
* Send new command to target.
*/
-static void ft_send_cmd(struct ft_cmd *cmd)
+static void ft_send_work(struct work_struct *work)
{
+ struct ft_cmd *cmd = container_of(work, struct ft_cmd, work);
struct fc_frame_header *fh = fc_frame_header_get(cmd->req_frame);
struct se_cmd *se_cmd;
struct fcp_cmnd *fcp;
- int data_dir;
+ int data_dir = 0;
u32 data_len;
int task_attr;
int ret;
err:
ft_send_resp_code_and_free(cmd, FCP_CMND_FIELDS_INVALID);
}
-
-/*
- * Handle request in the command thread.
- */
-static void ft_exec_req(struct ft_cmd *cmd)
-{
- pr_debug("cmd state %x\n", cmd->state);
- switch (cmd->state) {
- case FC_CMD_ST_NEW:
- ft_send_cmd(cmd);
- break;
- default:
- break;
- }
-}
-
-/*
- * Processing thread.
- * Currently one thread per tpg.
- */
-int ft_thread(void *arg)
-{
- struct ft_tpg *tpg = arg;
- struct se_queue_obj *qobj = &tpg->qobj;
- struct ft_cmd *cmd;
-
- while (!kthread_should_stop()) {
- schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
- if (kthread_should_stop())
- goto out;
-
- cmd = ft_dequeue_cmd(qobj);
- if (cmd)
- ft_exec_req(cmd);
- }
-
-out:
- return 0;
-}
struct se_portal_group *se_tpg = &tpg->se_tpg;
struct se_node_acl *se_acl;
- spin_lock_bh(&se_tpg->acl_node_lock);
+ spin_lock_irq(&se_tpg->acl_node_lock);
list_for_each_entry(se_acl, &se_tpg->acl_node_list, acl_list) {
acl = container_of(se_acl, struct ft_node_acl, se_node_acl);
pr_debug("acl %p port_name %llx\n",
break;
}
}
- spin_unlock_bh(&se_tpg->acl_node_lock);
+ spin_unlock_irq(&se_tpg->acl_node_lock);
return found;
}
tpg->index = index;
tpg->lport_acl = lacl;
INIT_LIST_HEAD(&tpg->lun_list);
- transport_init_queue_obj(&tpg->qobj);
ret = core_tpg_register(&ft_configfs->tf_ops, wwn, &tpg->se_tpg,
tpg, TRANSPORT_TPG_TYPE_NORMAL);
return NULL;
}
- tpg->thread = kthread_run(ft_thread, tpg, "ft_tpg%lu", index);
- if (IS_ERR(tpg->thread)) {
+ tpg->workqueue = alloc_workqueue("tcm_fc", 0, 1);
+ if (!tpg->workqueue) {
kfree(tpg);
return NULL;
}
pr_debug("del tpg %s\n",
config_item_name(&tpg->se_tpg.tpg_group.cg_item));
- kthread_stop(tpg->thread);
+ destroy_workqueue(tpg->workqueue);
/* Wait for sessions to be freed thru RCU, for BUG_ON below */
synchronize_rcu();
synchronize_rcu();
}
-#ifdef MODULE
MODULE_DESCRIPTION("FC TCM fabric driver " FT_VERSION);
MODULE_LICENSE("GPL");
module_init(ft_init);
module_exit(ft_exit);
-#endif /* MODULE */
if (cmd->was_ddp_setup) {
BUG_ON(!ep);
BUG_ON(!lport);
- }
-
- /*
- * Doesn't expect payload if DDP is setup. Payload
- * is expected to be copied directly to user buffers
- * due to DDP (Large Rx offload),
- */
- buf = fc_frame_payload_get(fp, 1);
- if (buf)
- pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, "
+ /*
+ * Since DDP (Large Rx offload) was setup for this request,
+ * payload is expected to be copied directly to user buffers.
+ */
+ buf = fc_frame_payload_get(fp, 1);
+ if (buf)
+ pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, "
"cmd->sg_cnt 0x%x. DDP was setup"
" hence not expected to receive frame with "
- "payload, Frame will be dropped if "
- "'Sequence Initiative' bit in f_ctl is "
+ "payload, Frame will be dropped if"
+ "'Sequence Initiative' bit in f_ctl is"
"not set\n", __func__, ep->xid, f_ctl,
cmd->sg, cmd->sg_cnt);
- /*
- * Invalidate HW DDP context if it was setup for respective
- * command. Invalidation of HW DDP context is requited in both
- * situation (success and error).
- */
- ft_invl_hw_context(cmd);
+ /*
+ * Invalidate HW DDP context if it was setup for respective
+ * command. Invalidation of HW DDP context is requited in both
+ * situation (success and error).
+ */
+ ft_invl_hw_context(cmd);
- /*
- * If "Sequence Initiative (TSI)" bit set in f_ctl, means last
- * write data frame is received successfully where payload is
- * posted directly to user buffer and only the last frame's
- * header is posted in receive queue.
- *
- * If "Sequence Initiative (TSI)" bit is not set, means error
- * condition w.r.t. DDP, hence drop the packet and let explict
- * ABORTS from other end of exchange timer trigger the recovery.
- */
- if (f_ctl & FC_FC_SEQ_INIT)
- goto last_frame;
- else
- goto drop;
+ /*
+ * If "Sequence Initiative (TSI)" bit set in f_ctl, means last
+ * write data frame is received successfully where payload is
+ * posted directly to user buffer and only the last frame's
+ * header is posted in receive queue.
+ *
+ * If "Sequence Initiative (TSI)" bit is not set, means error
+ * condition w.r.t. DDP, hence drop the packet and let explict
+ * ABORTS from other end of exchange timer trigger the recovery.
+ */
+ if (f_ctl & FC_FC_SEQ_INIT)
+ goto last_frame;
+ else
+ goto drop;
+ }
rel_off = ntohl(fh->fh_parm_offset);
frame_len = fr_len(fp);
int pty_limit = NR_UNIX98_PTY_DEFAULT;
static int pty_limit_min;
static int pty_limit_max = NR_UNIX98_PTY_MAX;
+static int tty_count;
static int pty_count;
+static inline void pty_inc_count(void)
+{
+ pty_count = (++tty_count) / 2;
+}
+
+static inline void pty_dec_count(void)
+{
+ pty_count = (--tty_count) / 2;
+}
+
static struct cdev ptmx_cdev;
static struct ctl_table pty_table[] = {
static void pty_unix98_shutdown(struct tty_struct *tty)
{
+ tty_driver_remove_tty(tty->driver, tty);
/* We have our own method as we don't use the tty index */
kfree(tty->termios);
}
*/
tty_driver_kref_get(driver);
tty->count++;
- pty_count++;
+ pty_inc_count(); /* tty */
+ pty_inc_count(); /* tty->link */
return 0;
err_free_mem:
deinitialize_tty_struct(o_tty);
static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
{
- pty_count--;
+ pty_dec_count();
}
static const struct tty_operations ptm_unix98_ops = {
unsigned int iir, ier = 0, lsr;
unsigned long flags;
+ spin_lock_irqsave(&up->port.lock, flags);
+
/*
* Must disable interrupts or else we risk racing with the interrupt
* based handler.
* the "Diva" UART used on the management processor on many HP
* ia64 and parisc boxes.
*/
- spin_lock_irqsave(&up->port.lock, flags);
lsr = serial_in(up, UART_LSR);
up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- spin_unlock_irqrestore(&up->port.lock, flags);
if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
(!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
(lsr & UART_LSR_THRE)) {
}
if (!(iir & UART_IIR_NO_INT))
- serial8250_handle_port(up);
+ transmit_chars(up);
if (is_real_interrupt(up->port.irq))
serial_out(up, UART_IER, ier);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
/* Standard timer interval plus 0.2s to keep the port running */
mod_timer(&up->timer,
jiffies + uart_poll_timeout(&up->port) + HZ / 5);
.device = 0x800D,
.init = pci_eg20t_init,
},
- {
- .vendor = 0x10DB,
- .device = 0x800D,
- .init = pci_eg20t_init,
- },
/*
* Cronyx Omega PCI (PLX-chip based)
*/
0, 0, pbn_NETMOS9900_2s_115200 },
/*
- * Best Connectivity PCI Multi I/O cards
+ * Best Connectivity and Rosewill PCI Multi I/O cards
*/
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+ 0xA000, 0x3002,
+ 0, 0, pbn_b0_bt_2_115200 },
+
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
0xA000, 0x3004,
0, 0, pbn_b0_bt_4_115200 },
/* IBM */
/* IBM Thinkpad 701 Internal Modem Voice */
{ "IBM0033", 0 },
+ /* Intermec */
+ /* Intermec CV60 touchscreen port */
+ { "PNP4972", 0 },
/* Intertex */
/* Intertex 28k8 33k6 Voice EXT PnP */
{ "IXDC801", 0 },
#ifdef CONFIG_ARM
#include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#endif
#define PDC_BUFFER_SIZE 512
static int __init atmel_console_init(void)
{
if (atmel_default_console_device) {
- add_preferred_console(ATMEL_DEVICENAME,
- atmel_default_console_device->id, NULL);
- atmel_init_port(&atmel_ports[atmel_default_console_device->id],
+ struct atmel_uart_data *pdata =
+ atmel_default_console_device->dev.platform_data;
+
+ add_preferred_console(ATMEL_DEVICENAME, pdata->num, NULL);
+ atmel_init_port(&atmel_ports[pdata->num],
atmel_default_console_device);
register_console(&atmel_console);
}
#if defined(CONFIG_ETRAX_RS485)
#if defined(CONFIG_ETRAX_RS485_ON_PA)
- if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit,
+ if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit,
rs485_pa_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
}
#endif
#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
- if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit,
+ if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit,
rs485_port_g_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
MODULE_DESCRIPTION("MAX3107 driver");
MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("aava-max3107-spi");
+MODULE_ALIAS("spi:aava-max3107");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MAX3107 driver");
MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("max3107-spi");
+MODULE_ALIAS("spi:max3107");
MODULE_LICENSE("GPL v2");
module_exit(serial_m3110_exit);
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("max3110-uart");
+MODULE_ALIAS("spi:max3110-uart");
serial_omap_set_mctrl(&up->port, up->port.mctrl);
/* Software Flow Control Configuration */
- if (termios->c_iflag & (IXON | IXOFF))
- serial_omap_configure_xonxoff(up, termios);
+ serial_omap_configure_xonxoff(up, termios);
spin_unlock_irqrestore(&up->port.lock, flags);
dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev
+ dma_dev = pci_get_bus_and_slot(priv->pdev->bus->number,
+ PCI_DEVFN(0xa, 0)); /* Get DMA's dev
information */
/* Set Tx DMA */
param = &priv->param_tx;
.suspend = s3c24xx_serial_suspend,
.resume = s3c24xx_serial_resume,
};
+#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops)
+
#else /* !CONFIG_PM_SLEEP */
-#define s3c24xx_serial_pm_ops NULL
+
+#define SERIAL_SAMSUNG_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
int s3c24xx_serial_init(struct platform_driver *drv,
struct s3c24xx_uart_info *info)
{
dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
- drv->driver.pm = &s3c24xx_serial_pm_ops;
+
+ drv->driver.pm = SERIAL_SAMSUNG_PM_OPS;
return platform_driver_register(drv);
}
clear_bit(TTY_IO_ERROR, &tty->flags);
}
+ /*
+ * This is to allow setserial on this port. People may want to set
+ * port/irq/type and then reconfigure the port properly if it failed
+ * now.
+ */
if (retval && capable(CAP_SYS_ADMIN))
retval = 0;
#include <linux/ctype.h>
#include <linux/err.h>
#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
#endif
struct notifier_block freq_transition;
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+ unsigned short saved_smr;
+ unsigned short saved_fcr;
+ unsigned char saved_brr;
+#endif
};
/* Function prototypes */
/* This routine is used for getting signals of: DTR, DCD, DSR, RI,
and CTS/RTS */
- return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
+ return TIOCM_DTR | TIOCM_RTS | TIOCM_CTS | TIOCM_DSR;
}
#ifdef CONFIG_SERIAL_SH_SCI_DMA
return ((freq + 16 * bps) / (32 * bps) - 1);
}
+static void sci_reset(struct uart_port *port)
+{
+ unsigned int status;
+
+ do {
+ status = sci_in(port, SCxSR);
+ } while (!(status & SCxSR_TEND(port)));
+
+ sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
+
+ if (port->type != PORT_SCI)
+ sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+}
+
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
struct sci_port *s = to_sci_port(port);
- unsigned int status, baud, smr_val, max_baud;
+ unsigned int baud, smr_val, max_baud;
int t = -1;
u16 scfcr = 0;
sci_port_enable(s);
- do {
- status = sci_in(port, SCxSR);
- } while (!(status & SCxSR_TEND(port)));
-
- sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
-
- if (port->type != PORT_SCI)
- sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST);
+ sci_reset(port);
smr_val = sci_in(port, SCSMR) & 3;
port->dev = &dev->dev;
+ pm_runtime_irq_safe(&dev->dev);
pm_runtime_enable(&dev->dev);
}
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
- /* TODO: disable clock */
+ sci_port_disable(sci_port);
+
return uart_set_options(port, co, baud, parity, bits, flow);
}
return 0;
}
+#define uart_console(port) ((port)->cons->index == (port)->line)
+
+static int sci_runtime_suspend(struct device *dev)
+{
+ struct sci_port *sci_port = dev_get_drvdata(dev);
+ struct uart_port *port = &sci_port->port;
+
+ if (uart_console(port)) {
+ sci_port->saved_smr = sci_in(port, SCSMR);
+ sci_port->saved_brr = sci_in(port, SCBRR);
+ sci_port->saved_fcr = sci_in(port, SCFCR);
+ }
+ return 0;
+}
+
+static int sci_runtime_resume(struct device *dev)
+{
+ struct sci_port *sci_port = dev_get_drvdata(dev);
+ struct uart_port *port = &sci_port->port;
+
+ if (uart_console(port)) {
+ sci_reset(port);
+ sci_out(port, SCSMR, sci_port->saved_smr);
+ sci_out(port, SCBRR, sci_port->saved_brr);
+ sci_out(port, SCFCR, sci_port->saved_fcr);
+ sci_out(port, SCSCR, sci_port->cfg->scscr);
+ }
+ return 0;
+}
+
#define SCI_CONSOLE (&serial_console)
#else
}
#define SCI_CONSOLE NULL
+#define sci_runtime_suspend NULL
+#define sci_runtime_resume NULL
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
}
static const struct dev_pm_ops sci_dev_pm_ops = {
+ .runtime_suspend = sci_runtime_suspend,
+ .runtime_resume = sci_runtime_resume,
.suspend = sci_suspend,
.resume = sci_resume,
};
return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);
/* something nasty happened */
- printk(KERN_ERR "%s: addr=%x\n", __func__, addr);
+ printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr);
BUG();
return NULL;
}
*
* Locking: tty_mutex for now
*/
-static void tty_driver_remove_tty(struct tty_driver *driver,
- struct tty_struct *tty)
+void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty)
{
if (driver->ops->remove)
driver->ops->remove(driver, tty);
struct usb_interface *iface = usb_ifnum_to_if(udev,
cur_alt->desc.bInterfaceNumber);
+ if (!iface)
+ return -EINVAL;
if (iface->resetting_device) {
/*
* The USB core just reset the device, so the xHCI host
config_ep_by_speed(gadget, f, fp->out_ep)) {
fp->in_ep->desc = NULL;
fp->out_ep->desc = NULL;
+ spin_unlock(&port->lock);
return -EINVAL;
}
usb_ep_enable(fp->out_ep);
u32 temp;
u32 power_okay;
int i;
- u8 resume_needed = 0;
+ unsigned long resume_needed = 0;
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
if (test_bit(i, &ehci->bus_suspended) &&
(temp & PORT_SUSPEND)) {
temp |= PORT_RESUME;
- resume_needed = 1;
+ set_bit(i, &resume_needed);
}
ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
}
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
- if (test_bit(i, &ehci->bus_suspended) &&
- (temp & PORT_SUSPEND)) {
+ if (test_bit(i, &resume_needed)) {
temp &= ~(PORT_RWC_BITS | PORT_RESUME);
ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
ehci_vdbg (ehci, "resumed port %d\n", i + 1);
goto fail_hcd;
}
+ s5p_ehci->hcd = hcd;
s5p_ehci->clk = clk_get(&pdev->dev, "usbhost");
if (IS_ERR(s5p_ehci->clk)) {
#include <mach/platform.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
&& (temp & PORT_POWER))
status |= USB_PORT_STAT_SUSPEND;
}
- if ((temp & PORT_PLS_MASK) == XDEV_RESUME) {
+ if ((temp & PORT_PLS_MASK) == XDEV_RESUME &&
+ !DEV_SUPERSPEED(temp)) {
if ((temp & PORT_RESET) || !(temp & PORT_PE))
goto error;
- if (!DEV_SUPERSPEED(temp) && time_after_eq(jiffies,
- bus_state->resume_done[wIndex])) {
+ if (time_after_eq(jiffies,
+ bus_state->resume_done[wIndex])) {
xhci_dbg(xhci, "Resume USB2 port %d\n",
wIndex + 1);
bus_state->resume_done[wIndex] = 0;
xhci_ring_device(xhci, slot_id);
bus_state->port_c_suspend |= 1 << wIndex;
bus_state->suspended_ports &= ~(1 << wIndex);
+ } else {
+ /*
+ * The resume has been signaling for less than
+ * 20ms. Report the port status as SUSPEND,
+ * let the usbcore check port status again
+ * and clear resume signaling later.
+ */
+ status |= USB_PORT_STAT_SUSPEND;
}
}
if ((temp & PORT_PLS_MASK) == XDEV_U0
xhci_dbg(xhci, "PORTSC %04x\n", temp);
if (temp & PORT_RESET)
goto error;
- if (temp & XDEV_U3) {
+ if ((temp & PORT_PLS_MASK) == XDEV_U3) {
if ((temp & PORT_PE) == 0)
goto error;
memset(buf, 0, retval);
status = 0;
- mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC;
+ mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
spin_lock_irqsave(&xhci->lock, flags);
/* For each port, did anything change? If so, set that bit in buf. */
(unsigned long long) addr);
}
+/* flip_cycle means flip the cycle bit of all but the first and last TRB.
+ * (The last TRB actually points to the ring enqueue pointer, which is not part
+ * of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
+ */
static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
- struct xhci_td *cur_td)
+ struct xhci_td *cur_td, bool flip_cycle)
{
struct xhci_segment *cur_seg;
union xhci_trb *cur_trb;
* leave the pointers intact.
*/
cur_trb->generic.field[3] &= cpu_to_le32(~TRB_CHAIN);
+ /* Flip the cycle bit (link TRBs can't be the first
+ * or last TRB).
+ */
+ if (flip_cycle)
+ cur_trb->generic.field[3] ^=
+ cpu_to_le32(TRB_CYCLE);
xhci_dbg(xhci, "Cancel (unchain) link TRB\n");
xhci_dbg(xhci, "Address = %p (0x%llx dma); "
"in seg %p (0x%llx dma)\n",
cur_trb->generic.field[2] = 0;
/* Preserve only the cycle bit of this TRB */
cur_trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
+ /* Flip the cycle bit except on the first or last TRB */
+ if (flip_cycle && cur_trb != cur_td->first_trb &&
+ cur_trb != cur_td->last_trb)
+ cur_trb->generic.field[3] ^=
+ cpu_to_le32(TRB_CYCLE);
cur_trb->generic.field[3] |= cpu_to_le32(
TRB_TYPE(TRB_TR_NOOP));
xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) "
cur_td->urb->stream_id,
cur_td, &deq_state);
else
- td_to_noop(xhci, ep_ring, cur_td);
+ td_to_noop(xhci, ep_ring, cur_td, false);
remove_finished_td:
/*
* The event handler won't see a completion for this TD anymore,
* so remove it from the endpoint ring's TD list. Keep it in
* the cancelled TD list for URB completion later.
*/
- list_del(&cur_td->td_list);
+ list_del_init(&cur_td->td_list);
}
last_unlinked_td = cur_td;
xhci_stop_watchdog_timer_in_irq(xhci, ep);
do {
cur_td = list_entry(ep->cancelled_td_list.next,
struct xhci_td, cancelled_td_list);
- list_del(&cur_td->cancelled_td_list);
+ list_del_init(&cur_td->cancelled_td_list);
/* Clean up the cancelled URB */
/* Doesn't matter what we pass for status, since the core will
cur_td = list_first_entry(&ring->td_list,
struct xhci_td,
td_list);
- list_del(&cur_td->td_list);
+ list_del_init(&cur_td->td_list);
if (!list_empty(&cur_td->cancelled_td_list))
- list_del(&cur_td->cancelled_td_list);
+ list_del_init(&cur_td->cancelled_td_list);
xhci_giveback_urb_in_irq(xhci, cur_td,
-ESHUTDOWN, "killed");
}
&temp_ep->cancelled_td_list,
struct xhci_td,
cancelled_td_list);
- list_del(&cur_td->cancelled_td_list);
+ list_del_init(&cur_td->cancelled_td_list);
xhci_giveback_urb_in_irq(xhci, cur_td,
-ESHUTDOWN, "killed");
}
else
*status = 0;
}
- list_del(&td->td_list);
+ list_del_init(&td->td_list);
/* Was this TD slated to be cancelled but completed anyway? */
if (!list_empty(&td->cancelled_td_list))
- list_del(&td->cancelled_td_list);
+ list_del_init(&td->cancelled_td_list);
urb_priv->td_cnt++;
/* Giveback the urb when all the tds are completed */
int status = -EINPROGRESS;
struct urb_priv *urb_priv;
struct xhci_ep_ctx *ep_ctx;
+ struct list_head *tmp;
u32 trb_comp_code;
int ret = 0;
+ int td_num = 0;
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
xdev = xhci->devs[slot_id];
return -ENODEV;
}
+ /* Count current td numbers if ep->skip is set */
+ if (ep->skip) {
+ list_for_each(tmp, &ep_ring->td_list)
+ td_num++;
+ }
+
event_dma = le64_to_cpu(event->buffer);
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
/* Look for common error cases */
goto cleanup;
}
+ /* We've skipped all the TDs on the ep ring when ep->skip set */
+ if (ep->skip && td_num == 0) {
+ ep->skip = false;
+ xhci_dbg(xhci, "All tds on the ep_ring skipped. "
+ "Clear skip flag.\n");
+ ret = 0;
+ goto cleanup;
+ }
+
td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+ if (ep->skip)
+ td_num--;
/* Is this a TRB in the currently executing TD? */
event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
if (td_index == 0) {
ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
- if (unlikely(ret)) {
- xhci_urb_free_priv(xhci, urb_priv);
- urb->hcpriv = NULL;
+ if (unlikely(ret))
return ret;
- }
}
td->urb = urb;
{
int packets_transferred;
+ /* One TRB with a zero-length data packet. */
+ if (running_total == 0 && trb_buff_len == 0)
+ return 0;
+
/* All the TRB queueing functions don't count the current TRB in
* running_total.
*/
struct urb *urb, int i)
{
int num_trbs = 0;
- u64 addr, td_len, running_total;
+ u64 addr, td_len;
addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
td_len = urb->iso_frame_desc[i].length;
- running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
- running_total &= TRB_MAX_BUFF_SIZE - 1;
- if (running_total != 0)
- num_trbs++;
-
- while (running_total < td_len) {
+ num_trbs = DIV_ROUND_UP(td_len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
+ TRB_MAX_BUFF_SIZE);
+ if (num_trbs == 0)
num_trbs++;
- running_total += TRB_MAX_BUFF_SIZE;
- }
return num_trbs;
}
start_trb = &ep_ring->enqueue->generic;
start_cycle = ep_ring->cycle_state;
+ urb_priv = urb->hcpriv;
/* Queue the first TRB, even if it's zero-length */
for (i = 0; i < num_tds; i++) {
unsigned int total_packet_count;
addr = start_addr + urb->iso_frame_desc[i].offset;
td_len = urb->iso_frame_desc[i].length;
td_remain_len = td_len;
- /* FIXME: Ignoring zero-length packets, can those happen? */
total_packet_count = roundup(td_len,
le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+ /* A zero-length transfer still involves at least one packet. */
+ if (total_packet_count == 0)
+ total_packet_count++;
burst_count = xhci_get_burst_count(xhci, urb->dev, urb,
total_packet_count);
residue = xhci_get_last_burst_packet_count(xhci,
ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
urb->stream_id, trbs_per_td, urb, i, mem_flags);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ if (i == 0)
+ return ret;
+ goto cleanup;
+ }
- urb_priv = urb->hcpriv;
td = urb_priv->td[i];
-
for (j = 0; j < trbs_per_td; j++) {
u32 remainder = 0;
field = TRB_TBC(burst_count) | TRB_TLBPC(residue);
giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
start_cycle, start_trb);
return 0;
+cleanup:
+ /* Clean up a partially enqueued isoc transfer. */
+
+ for (i--; i >= 0; i--)
+ list_del_init(&urb_priv->td[i]->td_list);
+
+ /* Use the first TD as a temporary variable to turn the TDs we've queued
+ * into No-ops with a software-owned cycle bit. That way the hardware
+ * won't accidentally start executing bogus TDs when we partially
+ * overwrite them. td->first_trb and td->start_seg are already set.
+ */
+ urb_priv->td[0]->last_trb = ep_ring->enqueue;
+ /* Every TRB except the first & last will have its cycle bit flipped. */
+ td_to_noop(xhci, ep_ring, urb_priv->td[0], true);
+
+ /* Reset the ring enqueue back to the first TRB and its cycle bit. */
+ ep_ring->enqueue = urb_priv->td[0]->first_trb;
+ ep_ring->enq_seg = urb_priv->td[0]->start_seg;
+ ep_ring->cycle_state = start_cycle;
+ usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
+ return ret;
}
/*
if (urb->dev->speed == USB_SPEED_FULL) {
ret = xhci_check_maxpacket(xhci, slot_id,
ep_index, urb);
- if (ret < 0)
+ if (ret < 0) {
+ xhci_urb_free_priv(xhci, urb_priv);
+ urb->hcpriv = NULL;
return ret;
+ }
}
/* We have a spinlock and interrupts disabled, so we must pass
goto dying;
ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
+ if (ret)
+ goto free_priv;
spin_unlock_irqrestore(&xhci->lock, flags);
} else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) {
spin_lock_irqsave(&xhci->lock, flags);
ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
}
+ if (ret)
+ goto free_priv;
spin_unlock_irqrestore(&xhci->lock, flags);
} else if (usb_endpoint_xfer_int(&urb->ep->desc)) {
spin_lock_irqsave(&xhci->lock, flags);
goto dying;
ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
+ if (ret)
+ goto free_priv;
spin_unlock_irqrestore(&xhci->lock, flags);
} else {
spin_lock_irqsave(&xhci->lock, flags);
goto dying;
ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
+ if (ret)
+ goto free_priv;
spin_unlock_irqrestore(&xhci->lock, flags);
}
exit:
return ret;
dying:
- xhci_urb_free_priv(xhci, urb_priv);
- urb->hcpriv = NULL;
xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for "
"non-responsive xHCI host.\n",
urb->ep->desc.bEndpointAddress, urb);
+ ret = -ESHUTDOWN;
+free_priv:
+ xhci_urb_free_priv(xhci, urb_priv);
+ urb->hcpriv = NULL;
spin_unlock_irqrestore(&xhci->lock, flags);
- return -ESHUTDOWN;
+ return ret;
}
/* Get the right ring for the given URB.
if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) {
xhci_dbg(xhci, "HW died, freeing TD.\n");
urb_priv = urb->hcpriv;
+ for (i = urb_priv->td_cnt; i < urb_priv->length; i++) {
+ td = urb_priv->td[i];
+ if (!list_empty(&td->td_list))
+ list_del_init(&td->td_list);
+ if (!list_empty(&td->cancelled_td_list))
+ list_del_init(&td->cancelled_td_list);
+ }
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock_irqrestore(&xhci->lock, flags);
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/prefetch.h>
#include <asm/cacheflush.h>
struct cppi *controller;
void __iomem *tibase;
int i;
+ struct musb *musb;
controller = container_of(c, struct cppi, controller);
+ musb = controller->musb;
tibase = controller->tibase;
/* DISABLE INDIVIDUAL CHANNEL Interrupts */
u8 index;
struct cppi_channel *cppi_ch;
void __iomem *tibase;
+ struct musb *musb;
controller = container_of(c, struct cppi, controller);
tibase = controller->tibase;
+ musb = controller->musb;
/* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */
index = ep->epnum - 1;
c = container_of(channel, struct cppi_channel, channel);
tibase = c->controller->tibase;
if (!c->hw_ep)
- dev_dbg(musb->controller, "releasing idle DMA channel %p\n", c);
+ dev_dbg(c->controller->musb->controller,
+ "releasing idle DMA channel %p\n", c);
else if (!c->transmit)
core_rxirq_enable(tibase, c->index + 1);
musb_ep_select(base, c->index + 1);
- DBG(level, "RX DMA%d%s: %d left, csr %04x, "
- "%08x H%08x S%08x C%08x, "
- "B%08x L%08x %08x .. %08x"
- "\n",
+ dev_dbg(c->controller->musb->controller,
+ "RX DMA%d%s: %d left, csr %04x, "
+ "%08x H%08x S%08x C%08x, "
+ "B%08x L%08x %08x .. %08x"
+ "\n",
c->index, tag,
musb_readl(c->controller->tibase,
DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index),
musb_ep_select(base, c->index + 1);
- DBG(level, "TX DMA%d%s: csr %04x, "
- "H%08x S%08x C%08x %08x, "
- "F%08x L%08x .. %08x"
- "\n",
+ dev_dbg(c->controller->musb->controller,
+ "TX DMA%d%s: csr %04x, "
+ "H%08x S%08x C%08x %08x, "
+ "F%08x L%08x .. %08x"
+ "\n",
c->index, tag,
musb_readw(c->hw_ep->regs, MUSB_TXCSR),
int i;
dma_addr_t safe2ack;
void __iomem *regs = rx->hw_ep->regs;
+ struct musb *musb = cppi->musb;
cppi_dump_rx(6, rx, "/K");
#include <mach/hardware.h>
#include <mach/memory.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/cputype.h>
#include <asm/mach-types.h>
#endif
/* TUSB mapping: "flat" plus ep0 special cases */
-#if defined(CONFIG_USB_MUSB_TUSB6010)
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
#define musb_ep_select(_mbase, _epnum) \
musb_writeb((_mbase), MUSB_INDEX, (_epnum))
#define MUSB_EP_OFFSET MUSB_TUSB_OFFSET
void __iomem *fifo;
void __iomem *regs;
-#ifdef CONFIG_USB_MUSB_TUSB6010
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
void __iomem *conf;
#endif
struct dma_channel *tx_channel;
struct dma_channel *rx_channel;
-#ifdef CONFIG_USB_MUSB_TUSB6010
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
/* TUSB has "asynchronous" and "synchronous" dma modes */
dma_addr_t fifo_async;
dma_addr_t fifo_sync;
void __iomem *ctrl_base;
void __iomem *mregs;
-#ifdef CONFIG_USB_MUSB_TUSB6010
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
dma_addr_t async;
dma_addr_t sync;
void __iomem *sync_va;
return 0;
err:
+ musb->g.dev.parent = NULL;
device_unregister(&musb->g.dev);
return status;
}
void musb_gadget_cleanup(struct musb *musb)
{
usb_del_gadget_udc(&musb->g);
- device_unregister(&musb->g.dev);
+ if (musb->g.dev.parent)
+ device_unregister(&musb->g.dev);
}
/*
#define MUSB_TESTMODE 0x0F /* 8 bit */
/* Get offset for a given FIFO from musb->mregs */
-#ifdef CONFIG_USB_MUSB_TUSB6010
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
#define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20))
#else
#define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4))
#define MUSB_FLAT_OFFSET(_epnum, _offset) \
(0x100 + (0x10*(_epnum)) + (_offset))
-#ifdef CONFIG_USB_MUSB_TUSB6010
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
/* TUSB6010 EP0 configuration register is special */
#define MUSB_TUSB_OFFSET(_epnum, _offset) \
(0x10 + _offset)
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/prefetch.h>
#include <linux/usb.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <plat/mux.h>
#include "musb_core.h"
+#include "tusb6010.h"
#define to_chdat(c) ((struct tusb_omap_dma_ch *)(c)->private_data)
struct musb *musb = hw_ep->musb;
unsigned long flags;
- DBG(4, "DMA tx transfer done on hw_ep=%d\n", hw_ep->epnum);
+ dev_dbg(musb->controller, "DMA tx transfer done on hw_ep=%d\n",
+ hw_ep->epnum);
spin_lock_irqsave(&musb->lock, flags);
ux500_channel->channel.actual_len = ux500_channel->cur_len;
struct musb *musb = hw_ep->musb;
unsigned long flags;
- DBG(4, "DMA rx transfer done on hw_ep=%d\n", hw_ep->epnum);
+ dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n",
+ hw_ep->epnum);
spin_lock_irqsave(&musb->lock, flags);
ux500_channel->channel.actual_len = ux500_channel->cur_len;
enum dma_slave_buswidth addr_width;
dma_addr_t usb_fifo_addr = (MUSB_FIFO_OFFSET(hw_ep->epnum) +
ux500_channel->controller->phy_base);
+ struct musb *musb = ux500_channel->controller->private_data;
- DBG(4, "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n",
- packet_sz, mode, dma_addr, len, ux500_channel->is_tx);
+ dev_dbg(musb->controller,
+ "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n",
+ packet_sz, mode, dma_addr, len, ux500_channel->is_tx);
ux500_channel->cur_len = len;
DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_conf.direction = direction;
- if (direction == DMA_FROM_DEVICE) {
- slave_conf.src_addr = usb_fifo_addr;
- slave_conf.src_addr_width = addr_width;
- slave_conf.src_maxburst = 16;
- } else {
- slave_conf.dst_addr = usb_fifo_addr;
- slave_conf.dst_addr_width = addr_width;
- slave_conf.dst_maxburst = 16;
- }
+ slave_conf.src_addr = usb_fifo_addr;
+ slave_conf.src_addr_width = addr_width;
+ slave_conf.src_maxburst = 16;
+ slave_conf.dst_addr = usb_fifo_addr;
+ slave_conf.dst_addr_width = addr_width;
+ slave_conf.dst_maxburst = 16;
+
dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG,
(unsigned long) &slave_conf);
struct ux500_dma_controller *controller = container_of(c,
struct ux500_dma_controller, controller);
struct ux500_dma_channel *ux500_channel = NULL;
+ struct musb *musb = controller->private_data;
u8 ch_num = hw_ep->epnum - 1;
u32 max_ch;
ux500_channel->hw_ep = hw_ep;
ux500_channel->is_allocated = 1;
- DBG(7, "hw_ep=%d, is_tx=0x%x, channel=%d\n",
+ dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n",
hw_ep->epnum, is_tx, ch_num);
return &(ux500_channel->channel);
static void ux500_dma_channel_release(struct dma_channel *channel)
{
struct ux500_dma_channel *ux500_channel = channel->private_data;
+ struct musb *musb = ux500_channel->controller->private_data;
- DBG(7, "channel=%d\n", ux500_channel->ch_num);
+ dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num);
if (ux500_channel->is_allocated) {
ux500_channel->is_allocated = 0;
void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs;
u16 csr;
- DBG(4, "channel=%d, is_tx=%d\n", ux500_channel->ch_num,
- ux500_channel->is_tx);
+ dev_dbg(musb->controller, "channel=%d, is_tx=%d\n",
+ ux500_channel->ch_num, ux500_channel->is_tx);
if (channel->status == MUSB_DMA_STATUS_BUSY) {
if (ux500_channel->is_tx) {
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
static int ftdi_NDI_device_setup(struct usb_serial *serial);
static int ftdi_stmclite_probe(struct usb_serial *serial);
+static int ftdi_8u2232c_probe(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
.probe = ftdi_stmclite_probe,
};
+static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
+ .probe = ftdi_8u2232c_probe,
+};
+
/*
* The 8U232AM has the same API as the sio except for:
* - it can support MUCH higher baudrates; up to:
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
- { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) ,
+ .driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
return 0;
}
+static int ftdi_8u2232c_probe(struct usb_serial *serial)
+{
+ struct usb_device *udev = serial->dev;
+
+ dbg("%s", __func__);
+
+ if (strcmp(udev->manufacturer, "CALAO Systems") == 0)
+ return ftdi_jtag_probe(serial);
+
+ return 0;
+}
+
/*
* First and second port on STMCLiteadaptors is reserved for JTAG interface
* and the forth port for pio
#define HUAWEI_PRODUCT_K4505 0x1464
#define HUAWEI_PRODUCT_K3765 0x1465
#define HUAWEI_PRODUCT_E14AC 0x14AC
+#define HUAWEI_PRODUCT_K3806 0x14AE
+#define HUAWEI_PRODUCT_K4605 0x14C6
#define HUAWEI_PRODUCT_K3770 0x14C9
#define HUAWEI_PRODUCT_K3771 0x14CA
#define HUAWEI_PRODUCT_K4510 0x14CB
#define SAMSUNG_VENDOR_ID 0x04e8
#define SAMSUNG_PRODUCT_GT_B3730 0x6889
+/* YUGA products www.yuga-info.com*/
+#define YUGA_VENDOR_ID 0x257A
+#define YUGA_PRODUCT_CEM600 0x1601
+#define YUGA_PRODUCT_CEM610 0x1602
+#define YUGA_PRODUCT_CEM500 0x1603
+#define YUGA_PRODUCT_CEM510 0x1604
+#define YUGA_PRODUCT_CEM800 0x1605
+#define YUGA_PRODUCT_CEM900 0x1606
+
+#define YUGA_PRODUCT_CEU818 0x1607
+#define YUGA_PRODUCT_CEU816 0x1608
+#define YUGA_PRODUCT_CEU828 0x1609
+#define YUGA_PRODUCT_CEU826 0x160A
+#define YUGA_PRODUCT_CEU518 0x160B
+#define YUGA_PRODUCT_CEU516 0x160C
+#define YUGA_PRODUCT_CEU528 0x160D
+#define YUGA_PRODUCT_CEU526 0x160F
+
+#define YUGA_PRODUCT_CWM600 0x2601
+#define YUGA_PRODUCT_CWM610 0x2602
+#define YUGA_PRODUCT_CWM500 0x2603
+#define YUGA_PRODUCT_CWM510 0x2604
+#define YUGA_PRODUCT_CWM800 0x2605
+#define YUGA_PRODUCT_CWM900 0x2606
+
+#define YUGA_PRODUCT_CWU718 0x2607
+#define YUGA_PRODUCT_CWU716 0x2608
+#define YUGA_PRODUCT_CWU728 0x2609
+#define YUGA_PRODUCT_CWU726 0x260A
+#define YUGA_PRODUCT_CWU518 0x260B
+#define YUGA_PRODUCT_CWU516 0x260C
+#define YUGA_PRODUCT_CWU528 0x260D
+#define YUGA_PRODUCT_CWU526 0x260F
+
+#define YUGA_PRODUCT_CLM600 0x2601
+#define YUGA_PRODUCT_CLM610 0x2602
+#define YUGA_PRODUCT_CLM500 0x2603
+#define YUGA_PRODUCT_CLM510 0x2604
+#define YUGA_PRODUCT_CLM800 0x2605
+#define YUGA_PRODUCT_CLM900 0x2606
+
+#define YUGA_PRODUCT_CLU718 0x2607
+#define YUGA_PRODUCT_CLU716 0x2608
+#define YUGA_PRODUCT_CLU728 0x2609
+#define YUGA_PRODUCT_CLU726 0x260A
+#define YUGA_PRODUCT_CLU518 0x260B
+#define YUGA_PRODUCT_CLU516 0x260C
+#define YUGA_PRODUCT_CLU528 0x260D
+#define YUGA_PRODUCT_CLU526 0x260F
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM500) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM510) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM800) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM900) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU818) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU816) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU828) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU826) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU518) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU516) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU528) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU526) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM600) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM610) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM500) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM510) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM800) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM900) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU718) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU716) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU728) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU726) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU518) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU516) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU528) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU526) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM600) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM610) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM500) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM510) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM800) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM900) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU718) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU716) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU728) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU726) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU518) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
return -ENODEV;
- /* Don't bind network interfaces on Huawei K3765 & K4505 */
+ /* Don't bind network interfaces on Huawei K3765, K4505 & K4605 */
if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID &&
(serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 ||
- serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) &&
- serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
+ serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505 ||
+ serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4605) &&
+ (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1 ||
+ serial->interface->cur_altsetting->desc.bInterfaceNumber == 2))
return -ENODEV;
/* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */
#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <video/atmel_lcdc.h>
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("ADP8870 Backlight driver");
-MODULE_ALIAS("platform:adp8870-backlight");
+MODULE_ALIAS("i2c:adp8870-backlight");
#include <asm/backlight.h>
#endif
-static const char const *backlight_types[] = {
+static const char *const backlight_types[] = {
[BACKLIGHT_RAW] = "raw",
[BACKLIGHT_PLATFORM] = "platform",
[BACKLIGHT_FIRMWARE] = "firmware",
* BRIGHT, on the Cirrus EP9307, EP9312, and EP9315 processors.
*/
-
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/fb.h>
unsigned int lth_brightness;
int (*notify)(struct device *,
int brightness);
+ void (*notify_after)(struct device *,
+ int brightness);
int (*check_fb)(struct device *, struct fb_info *);
};
pwm_config(pb->pwm, brightness, pb->period);
pwm_enable(pb->pwm);
}
+
+ if (pb->notify_after)
+ pb->notify_after(pb->dev, brightness);
+
return 0;
}
pb->period = data->pwm_period_ns;
pb->notify = data->notify;
+ pb->notify_after = data->notify_after;
pb->check_fb = data->check_fb;
pb->lth_brightness = data->lth_brightness *
(data->pwm_period_ns / data->max_brightness);
pb->notify(pb->dev, 0);
pwm_config(pb->pwm, 0, pb->period);
pwm_disable(pb->pwm);
+ if (pb->notify_after)
+ pb->notify_after(pb->dev, 0);
return 0;
}
#include "regs.h"
#include "reg_bits.h"
-static unsigned long virt_base_2700;
+static void __iomem *virt_base_2700;
#define write_reg(val, reg) do { writel((val), (reg)); } while(0)
{
/* make frame buffer memory enter self-refresh mode */
write_reg_dly(LMPWR_MC_PWR_SRM, LMPWR);
- while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM)
+ while (readl(LMPWRSTAT) != LMPWRSTAT_MC_PWR_SRM)
; /* empty statement */
/* reset the device, since it's initial state is 'mostly sleeping' */
ret = -EINVAL;
goto err3;
}
- virt_base_2700 = (unsigned long)mfbi->reg_virt_addr;
+ virt_base_2700 = mfbi->reg_virt_addr;
mfbi->fb_virt_addr = ioremap_nocache(mfbi->fb_phys_addr,
res_size(mfbi->fb_req));
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
#include <linux/delay.h>
#include <linux/i2c/twl.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/mux.h>
#include "omapfb.h"
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
static int palmtt_panel_init(struct lcd_panel *panel,
#include <linux/clk.h>
#include <linux/gfp.h>
#include <asm/uaccess.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "sdum.h"
#include "fbcommon.h"
return 0;
}
#else
-int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int n_cmds)
-{
- return 0;
-}
-
-int pxafb_smart_flush(struct fb_info *info)
-{
- return 0;
-}
-
static inline int pxafb_smart_init(struct pxafb_info *fbi) { return 0; }
#endif /* CONFIG_FB_PXA_SMARTPANEL */
/*
* dscore.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
module_exit(ds_fini);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)");
/*
* matrox_w1.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
#include "../w1_log.h"
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire prtocol) over VGA DDC(matrox gpio).");
static struct pci_device_id matrox_w1_tbl[] = {
static void w1_f29_remove_slave(struct w1_slave *sl)
{
int i;
- for (i = NB_SYSFS_BIN_FILES; i <= 0; --i)
+ for (i = NB_SYSFS_BIN_FILES - 1; i >= 0; --i)
sysfs_remove_bin_file(&sl->dev.kobj,
&(w1_f29_sysfs_bin_files[i]));
}
/*
* w1_smem.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
#include "../w1_family.h"
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, 64bit memory family.");
static struct w1_family w1_smem_family_01 = {
/*
* w1_therm.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
#include "../w1_family.h"
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature family.");
/* Allow the strong pullup to be disabled, but default to enabled.
/*
* w1.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
#include "w1_netlink.h"
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol.");
static int w1_timeout = 10;
/*
* w1.h
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
/*
* w1_family.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
/*
* w1_family.h
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
/*
* w1_int.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
/*
* w1_int.h
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
/*
* w1_io.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
/*
* w1_log.h
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
/*
* w1_netlink.c
*
- * Copyright (c) 2003 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2003 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
/*
* w1_netlink.h
*
- * Copyright (c) 2003 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2003 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
asminline_call(&cmn_regs, cru_rom_addr);
die_nmi_called = 1;
spin_unlock_irqrestore(&rom_lock, rom_pl);
+
+ if (allow_kdump)
+ hpwdt_stop();
+
if (!is_icru) {
if (cmn_regs.u1.ral == 0) {
- printk(KERN_WARNING "hpwdt: An NMI occurred, "
+ panic("An NMI occurred, "
"but unable to determine source.\n");
}
}
-
- if (allow_kdump)
- hpwdt_stop();
panic("An NMI occurred, please see the Integrated "
"Management Log for details.\n");
static void
ltq_wdt_enable(void)
{
- ltq_wdt_timeout = ltq_wdt_timeout *
+ unsigned long int timeout = ltq_wdt_timeout *
(ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000;
- if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT)
- ltq_wdt_timeout = LTQ_MAX_TIMEOUT;
+ if (timeout > LTQ_MAX_TIMEOUT)
+ timeout = LTQ_MAX_TIMEOUT;
/* write the first password magic */
ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
/* write the second magic plus the configuration and new timeout */
ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV |
- LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR);
+ LTQ_WDT_PW2 | timeout, ltq_wdt_membase + LTQ_WDT_CR);
}
static void
.notifier_call = epx_c3_notify_sys,
};
-static const char banner[] __initdata = KERN_INFO PFX
+static const char banner[] __initconst = KERN_INFO PFX
"Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n";
static int __init watchdog_init(void)
static int watchdog_ping(struct watchdog_device *wddev)
{
- if (test_bit(WDOG_ACTIVE, &wdd->status)) {
+ if (test_bit(WDOG_ACTIVE, &wddev->status)) {
if (wddev->ops->ping)
return wddev->ops->ping(wddev); /* ping the watchdog */
else
{
int err;
- if (!test_bit(WDOG_ACTIVE, &wdd->status)) {
+ if (!test_bit(WDOG_ACTIVE, &wddev->status)) {
err = wddev->ops->start(wddev);
if (err < 0)
return err;
- set_bit(WDOG_ACTIVE, &wdd->status);
+ set_bit(WDOG_ACTIVE, &wddev->status);
}
return 0;
}
{
int err = -EBUSY;
- if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) {
+ if (test_bit(WDOG_NO_WAY_OUT, &wddev->status)) {
pr_info("%s: nowayout prevents watchdog to be stopped!\n",
- wdd->info->identity);
+ wddev->info->identity);
return err;
}
- if (test_bit(WDOG_ACTIVE, &wdd->status)) {
+ if (test_bit(WDOG_ACTIVE, &wddev->status)) {
err = wddev->ops->stop(wddev);
if (err < 0)
return err;
- clear_bit(WDOG_ACTIVE, &wdd->status);
+ clear_bit(WDOG_ACTIVE, &wddev->status);
}
return 0;
}
* This lock protects updates to the following mapping and reference-count
* arrays. The lock does not need to be acquired to read the mapping tables.
*/
-static DEFINE_SPINLOCK(irq_mapping_update_lock);
+static DEFINE_MUTEX(irq_mapping_update_lock);
static LIST_HEAD(xen_irq_list_head);
int irq = -1;
struct physdev_irq irq_op;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
irq = find_irq_by_gsi(gsi);
if (irq != -1) {
handle_edge_irq, name);
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
}
{
int irq, ret;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
irq = xen_allocate_irq_dynamic();
if (irq == -1)
if (ret < 0)
goto error_irq;
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
error_irq:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
xen_free_irq(irq);
return -1;
}
struct irq_info *info = info_for_irq(irq);
int rc = -ENOENT;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
desc = irq_to_desc(irq);
if (!desc)
xen_free_irq(irq);
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return rc;
}
struct irq_info *info;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
list_for_each_entry(info, &xen_irq_list_head, list) {
if (info == NULL || info->type != IRQT_PIRQ)
}
irq = -1;
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
}
{
int irq;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
irq = evtchn_to_irq[evtchn];
}
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
}
struct evtchn_bind_ipi bind_ipi;
int evtchn, irq;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
irq = per_cpu(ipi_to_irq, cpu)[ipi];
}
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
}
struct evtchn_bind_virq bind_virq;
int evtchn, irq;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
irq = per_cpu(virq_to_irq, cpu)[virq];
}
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
}
struct evtchn_close close;
int evtchn = evtchn_from_irq(irq);
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
if (VALID_EVTCHN(evtchn)) {
close.port = evtchn;
xen_free_irq(irq);
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
}
int bind_evtchn_to_irqhandler(unsigned int evtchn,
will also be masked. */
disable_irq(irq);
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
/* After resume the irq<->evtchn mappings are all cleared out */
BUG_ON(evtchn_to_irq[evtchn] != -1);
xen_irq_info_evtchn_init(irq, evtchn);
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
/* new event channels are always bound to cpu 0 */
irq_set_affinity(irq, cpumask_of(0));
}
platform_set_drvdata(pdev, bus);
- /* Register all devices */
pr_info("Zorro: Probing AutoConfig expansion devices: %u device%s\n",
zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
+ /* First identify all devices ... */
for (i = 0; i < zorro_num_autocon; i++) {
z = &zorro_autocon[i];
z->id = (z->rom.er_Manufacturer<<16) | (z->rom.er_Product<<8);
dev_set_name(&z->dev, "%02x", i);
z->dev.parent = &bus->dev;
z->dev.bus = &zorro_bus_type;
+ }
+
+ /* ... then register them */
+ for (i = 0; i < zorro_num_autocon; i++) {
+ z = &zorro_autocon[i];
error = device_register(&z->dev);
if (error) {
dev_err(&bus->dev, "Error registering device %s\n",
struct inode *v9fs_alloc_inode(struct super_block *sb);
void v9fs_destroy_inode(struct inode *inode);
-struct inode *v9fs_get_inode(struct super_block *sb, int mode);
+struct inode *v9fs_get_inode(struct super_block *sb, int mode, dev_t);
int v9fs_init_inode(struct v9fs_session_info *v9ses,
- struct inode *inode, int mode);
+ struct inode *inode, int mode, dev_t);
void v9fs_evict_inode(struct inode *inode);
ino_t v9fs_qid2ino(struct p9_qid *qid);
void v9fs_stat2inode(struct p9_wstat *, struct inode *, struct super_block *);
v9inode->cache_validity |= V9FS_INO_INVALID_ATTR;
return;
}
+
+int v9fs_open_to_dotl_flags(int flags);
#endif
v9inode = V9FS_I(inode);
v9ses = v9fs_inode2v9ses(inode);
if (v9fs_proto_dotl(v9ses))
- omode = file->f_flags;
+ omode = v9fs_open_to_dotl_flags(file->f_flags);
else
omode = v9fs_uflags2omode(file->f_flags,
v9fs_proto_dotu(v9ses));
/* convert posix lock to p9 tlock args */
memset(&flock, 0, sizeof(flock));
- flock.type = fl->fl_type;
+ /* map the lock type */
+ switch (fl->fl_type) {
+ case F_RDLCK:
+ flock.type = P9_LOCK_TYPE_RDLCK;
+ break;
+ case F_WRLCK:
+ flock.type = P9_LOCK_TYPE_WRLCK;
+ break;
+ case F_UNLCK:
+ flock.type = P9_LOCK_TYPE_UNLCK;
+ break;
+ }
flock.start = fl->fl_start;
if (fl->fl_end == OFFSET_MAX)
flock.length = 0;
/* convert posix lock to p9 tgetlock args */
memset(&glock, 0, sizeof(glock));
- glock.type = fl->fl_type;
+ glock.type = P9_LOCK_TYPE_UNLCK;
glock.start = fl->fl_start;
if (fl->fl_end == OFFSET_MAX)
glock.length = 0;
res = p9_client_getlock_dotl(fid, &glock);
if (res < 0)
return res;
- if (glock.type != F_UNLCK) {
- fl->fl_type = glock.type;
+ /* map 9p lock type to os lock type */
+ switch (glock.type) {
+ case P9_LOCK_TYPE_RDLCK:
+ fl->fl_type = F_RDLCK;
+ break;
+ case P9_LOCK_TYPE_WRLCK:
+ fl->fl_type = F_WRLCK;
+ break;
+ case P9_LOCK_TYPE_UNLCK:
+ fl->fl_type = F_UNLCK;
+ break;
+ }
+ if (glock.type != P9_LOCK_TYPE_UNLCK) {
fl->fl_start = glock.start;
if (glock.length == 0)
fl->fl_end = OFFSET_MAX;
else
fl->fl_end = glock.start + glock.length - 1;
fl->fl_pid = glock.proc_id;
- } else
- fl->fl_type = F_UNLCK;
-
+ }
return res;
}
/**
* p9mode2unixmode- convert plan9 mode bits to unix mode bits
* @v9ses: v9fs session information
- * @mode: mode to convert
+ * @stat: p9_wstat from which mode need to be derived
+ * @rdev: major number, minor number in case of device files.
*
*/
-
-static int p9mode2unixmode(struct v9fs_session_info *v9ses, int mode)
+static int p9mode2unixmode(struct v9fs_session_info *v9ses,
+ struct p9_wstat *stat, dev_t *rdev)
{
int res;
+ int mode = stat->mode;
- res = mode & 0777;
+ res = mode & S_IALLUGO;
+ *rdev = 0;
if ((mode & P9_DMDIR) == P9_DMDIR)
res |= S_IFDIR;
&& (v9ses->nodev == 0))
res |= S_IFIFO;
else if ((mode & P9_DMDEVICE) && (v9fs_proto_dotu(v9ses))
- && (v9ses->nodev == 0))
- res |= S_IFBLK;
- else
+ && (v9ses->nodev == 0)) {
+ char type = 0, ext[32];
+ int major = -1, minor = -1;
+
+ strncpy(ext, stat->extension, sizeof(ext));
+ sscanf(ext, "%c %u %u", &type, &major, &minor);
+ switch (type) {
+ case 'c':
+ res |= S_IFCHR;
+ break;
+ case 'b':
+ res |= S_IFBLK;
+ break;
+ default:
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "Unknown special type %c %s\n", type,
+ stat->extension);
+ };
+ *rdev = MKDEV(major, minor);
+ } else
res |= S_IFREG;
if (v9fs_proto_dotu(v9ses)) {
if ((mode & P9_DMSETVTX) == P9_DMSETVTX)
res |= S_ISVTX;
}
-
return res;
}
}
int v9fs_init_inode(struct v9fs_session_info *v9ses,
- struct inode *inode, int mode)
+ struct inode *inode, int mode, dev_t rdev)
{
int err = 0;
inode_init_owner(inode, NULL, mode);
inode->i_blocks = 0;
- inode->i_rdev = 0;
+ inode->i_rdev = rdev;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
inode->i_mapping->a_ops = &v9fs_addr_operations;
*
*/
-struct inode *v9fs_get_inode(struct super_block *sb, int mode)
+struct inode *v9fs_get_inode(struct super_block *sb, int mode, dev_t rdev)
{
int err;
struct inode *inode;
P9_EPRINTK(KERN_WARNING, "Problem allocating inode\n");
return ERR_PTR(-ENOMEM);
}
- err = v9fs_init_inode(v9ses, inode, mode);
+ err = v9fs_init_inode(v9ses, inode, mode, rdev);
if (err) {
iput(inode);
return ERR_PTR(err);
static int v9fs_test_inode(struct inode *inode, void *data)
{
int umode;
+ dev_t rdev;
struct v9fs_inode *v9inode = V9FS_I(inode);
struct p9_wstat *st = (struct p9_wstat *)data;
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode);
- umode = p9mode2unixmode(v9ses, st->mode);
+ umode = p9mode2unixmode(v9ses, st, &rdev);
/* don't match inode of different type */
if ((inode->i_mode & S_IFMT) != (umode & S_IFMT))
return 0;
struct p9_wstat *st,
int new)
{
+ dev_t rdev;
int retval, umode;
unsigned long i_ino;
struct inode *inode;
* later.
*/
inode->i_ino = i_ino;
- umode = p9mode2unixmode(v9ses, st->mode);
- retval = v9fs_init_inode(v9ses, inode, umode);
+ umode = p9mode2unixmode(v9ses, st, &rdev);
+ retval = v9fs_init_inode(v9ses, inode, umode, rdev);
if (retval)
goto error;
return inode;
}
+/**
+ * v9fs_at_to_dotl_flags- convert Linux specific AT flags to
+ * plan 9 AT flag.
+ * @flags: flags to convert
+ */
+static int v9fs_at_to_dotl_flags(int flags)
+{
+ int rflags = 0;
+ if (flags & AT_REMOVEDIR)
+ rflags |= P9_DOTL_AT_REMOVEDIR;
+ return rflags;
+}
+
/**
* v9fs_remove - helper function to remove files and directories
* @dir: directory inode that is being deleted
return retval;
}
if (v9fs_proto_dotl(v9ses))
- retval = p9_client_unlinkat(dfid, dentry->d_name.name, flags);
+ retval = p9_client_unlinkat(dfid, dentry->d_name.name,
+ v9fs_at_to_dotl_flags(flags));
if (retval == -EOPNOTSUPP) {
/* Try the one based on path */
v9fid = v9fs_fid_clone(dentry);
P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n", err);
goto error;
}
- d_instantiate(dentry, inode);
err = v9fs_fid_add(dentry, fid);
if (err < 0)
goto error;
-
+ d_instantiate(dentry, inode);
return ofid;
-
error:
if (ofid)
p9_client_clunk(ofid);
struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry,
struct nameidata *nameidata)
{
+ struct dentry *res;
struct super_block *sb;
struct v9fs_session_info *v9ses;
struct p9_fid *dfid, *fid;
return ERR_PTR(result);
}
-
- inode = v9fs_get_inode_from_fid(v9ses, fid, dir->i_sb);
+ /*
+ * Make sure we don't use a wrong inode due to parallel
+ * unlink. For cached mode create calls request for new
+ * inode. But with cache disabled, lookup should do this.
+ */
+ if (v9ses->cache)
+ inode = v9fs_get_inode_from_fid(v9ses, fid, dir->i_sb);
+ else
+ inode = v9fs_get_new_inode_from_fid(v9ses, fid, dir->i_sb);
if (IS_ERR(inode)) {
result = PTR_ERR(inode);
inode = NULL;
goto error;
}
-
result = v9fs_fid_add(dentry, fid);
if (result < 0)
goto error_iput;
-
inst_out:
- d_add(dentry, inode);
- return NULL;
-
+ /*
+ * If we had a rename on the server and a parallel lookup
+ * for the new name, then make sure we instantiate with
+ * the new name. ie look up for a/b, while on server somebody
+ * moved b under k and client parallely did a lookup for
+ * k/b.
+ */
+ res = d_materialise_unique(dentry, inode);
+ if (!IS_ERR(res))
+ return res;
+ result = PTR_ERR(res);
error_iput:
iput(inode);
error:
return PTR_ERR(st);
v9fs_stat2inode(st, dentry->d_inode, dentry->d_inode->i_sb);
- generic_fillattr(dentry->d_inode, stat);
+ generic_fillattr(dentry->d_inode, stat);
p9stat_free(st);
kfree(st);
v9fs_stat2inode(struct p9_wstat *stat, struct inode *inode,
struct super_block *sb)
{
+ mode_t mode;
char ext[32];
char tag_name[14];
unsigned int i_nlink;
inode->i_nlink = i_nlink;
}
}
- inode->i_mode = p9mode2unixmode(v9ses, stat->mode);
- if ((S_ISBLK(inode->i_mode)) || (S_ISCHR(inode->i_mode))) {
- char type = 0;
- int major = -1;
- int minor = -1;
-
- strncpy(ext, stat->extension, sizeof(ext));
- sscanf(ext, "%c %u %u", &type, &major, &minor);
- switch (type) {
- case 'c':
- inode->i_mode &= ~S_IFBLK;
- inode->i_mode |= S_IFCHR;
- break;
- case 'b':
- break;
- default:
- P9_DPRINTK(P9_DEBUG_ERROR,
- "Unknown special type %c %s\n", type,
- stat->extension);
- };
- inode->i_rdev = MKDEV(major, minor);
- init_special_inode(inode, inode->i_mode, inode->i_rdev);
- } else
- inode->i_rdev = 0;
-
+ mode = stat->mode & S_IALLUGO;
+ mode |= inode->i_mode & ~S_IALLUGO;
+ inode->i_mode = mode;
i_size_write(inode, stat->length);
/* not real number of blocks, but 512 byte ones ... */
int v9fs_refresh_inode(struct p9_fid *fid, struct inode *inode)
{
+ int umode;
+ dev_t rdev;
loff_t i_size;
struct p9_wstat *st;
struct v9fs_session_info *v9ses;
st = p9_client_stat(fid);
if (IS_ERR(st))
return PTR_ERR(st);
+ /*
+ * Don't update inode if the file type is different
+ */
+ umode = p9mode2unixmode(v9ses, st, &rdev);
+ if ((inode->i_mode & S_IFMT) != (umode & S_IFMT))
+ goto out;
spin_lock(&inode->i_lock);
/*
if (v9ses->cache)
inode->i_size = i_size;
spin_unlock(&inode->i_lock);
+out:
p9stat_free(st);
kfree(st);
return 0;
* later.
*/
inode->i_ino = i_ino;
- retval = v9fs_init_inode(v9ses, inode, st->st_mode);
+ retval = v9fs_init_inode(v9ses, inode,
+ st->st_mode, new_decode_dev(st->st_rdev));
if (retval)
goto error;
return inode;
}
+struct dotl_openflag_map {
+ int open_flag;
+ int dotl_flag;
+};
+
+static int v9fs_mapped_dotl_flags(int flags)
+{
+ int i;
+ int rflags = 0;
+ struct dotl_openflag_map dotl_oflag_map[] = {
+ { O_CREAT, P9_DOTL_CREATE },
+ { O_EXCL, P9_DOTL_EXCL },
+ { O_NOCTTY, P9_DOTL_NOCTTY },
+ { O_TRUNC, P9_DOTL_TRUNC },
+ { O_APPEND, P9_DOTL_APPEND },
+ { O_NONBLOCK, P9_DOTL_NONBLOCK },
+ { O_DSYNC, P9_DOTL_DSYNC },
+ { FASYNC, P9_DOTL_FASYNC },
+ { O_DIRECT, P9_DOTL_DIRECT },
+ { O_LARGEFILE, P9_DOTL_LARGEFILE },
+ { O_DIRECTORY, P9_DOTL_DIRECTORY },
+ { O_NOFOLLOW, P9_DOTL_NOFOLLOW },
+ { O_NOATIME, P9_DOTL_NOATIME },
+ { O_CLOEXEC, P9_DOTL_CLOEXEC },
+ { O_SYNC, P9_DOTL_SYNC},
+ };
+ for (i = 0; i < ARRAY_SIZE(dotl_oflag_map); i++) {
+ if (flags & dotl_oflag_map[i].open_flag)
+ rflags |= dotl_oflag_map[i].dotl_flag;
+ }
+ return rflags;
+}
+
+/**
+ * v9fs_open_to_dotl_flags- convert Linux specific open flags to
+ * plan 9 open flag.
+ * @flags: flags to convert
+ */
+int v9fs_open_to_dotl_flags(int flags)
+{
+ int rflags = 0;
+
+ /*
+ * We have same bits for P9_DOTL_READONLY, P9_DOTL_WRONLY
+ * and P9_DOTL_NOACCESS
+ */
+ rflags |= flags & O_ACCMODE;
+ rflags |= v9fs_mapped_dotl_flags(flags);
+
+ return rflags;
+}
+
/**
* v9fs_vfs_create_dotl - VFS hook to create files for 9P2000.L protocol.
* @dir: directory inode that is being created
"Failed to get acl values in creat %d\n", err);
goto error;
}
- err = p9_client_create_dotl(ofid, name, flags, mode, gid, &qid);
+ err = p9_client_create_dotl(ofid, name, v9fs_open_to_dotl_flags(flags),
+ mode, gid, &qid);
if (err < 0) {
P9_DPRINTK(P9_DEBUG_VFS,
"p9_client_open_dotl failed in creat %d\n",
P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n", err);
goto error;
}
- d_instantiate(dentry, inode);
err = v9fs_fid_add(dentry, fid);
if (err < 0)
goto error;
+ d_instantiate(dentry, inode);
/* Now set the ACL based on the default value */
v9fs_set_create_acl(dentry, &dacl, &pacl);
err);
goto error;
}
- d_instantiate(dentry, inode);
err = v9fs_fid_add(dentry, fid);
if (err < 0)
goto error;
+ d_instantiate(dentry, inode);
fid = NULL;
} else {
/*
* inode with stat. We need to get an inode
* so that we can set the acl with dentry
*/
- inode = v9fs_get_inode(dir->i_sb, mode);
+ inode = v9fs_get_inode(dir->i_sb, mode, 0);
if (IS_ERR(inode)) {
err = PTR_ERR(inode);
goto error;
void
v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode)
{
+ mode_t mode;
struct v9fs_inode *v9inode = V9FS_I(inode);
if ((stat->st_result_mask & P9_STATS_BASIC) == P9_STATS_BASIC) {
inode->i_uid = stat->st_uid;
inode->i_gid = stat->st_gid;
inode->i_nlink = stat->st_nlink;
- inode->i_mode = stat->st_mode;
- inode->i_rdev = new_decode_dev(stat->st_rdev);
- if ((S_ISBLK(inode->i_mode)) || (S_ISCHR(inode->i_mode)))
- init_special_inode(inode, inode->i_mode, inode->i_rdev);
+ mode = stat->st_mode & S_IALLUGO;
+ mode |= inode->i_mode & ~S_IALLUGO;
+ inode->i_mode = mode;
i_size_write(inode, stat->st_size);
inode->i_blocks = stat->st_blocks;
err);
goto error;
}
- d_instantiate(dentry, inode);
err = v9fs_fid_add(dentry, fid);
if (err < 0)
goto error;
+ d_instantiate(dentry, inode);
fid = NULL;
} else {
/* Not in cached mode. No need to populate inode with stat */
- inode = v9fs_get_inode(dir->i_sb, S_IFLNK);
+ inode = v9fs_get_inode(dir->i_sb, S_IFLNK, 0);
if (IS_ERR(inode)) {
err = PTR_ERR(inode);
goto error;
err);
goto error;
}
- d_instantiate(dentry, inode);
err = v9fs_fid_add(dentry, fid);
if (err < 0)
goto error;
+ d_instantiate(dentry, inode);
fid = NULL;
} else {
/*
* Not in cached mode. No need to populate inode with stat.
* socket syscall returns a fd, so we need instantiate
*/
- inode = v9fs_get_inode(dir->i_sb, mode);
+ inode = v9fs_get_inode(dir->i_sb, mode, rdev);
if (IS_ERR(inode)) {
err = PTR_ERR(inode);
goto error;
st = p9_client_getattr_dotl(fid, P9_STATS_ALL);
if (IS_ERR(st))
return PTR_ERR(st);
+ /*
+ * Don't update inode if the file type is different
+ */
+ if ((inode->i_mode & S_IFMT) != (st->st_mode & S_IFMT))
+ goto out;
spin_lock(&inode->i_lock);
/*
if (v9ses->cache)
inode->i_size = i_size;
spin_unlock(&inode->i_lock);
+out:
kfree(st);
return 0;
}
else
sb->s_d_op = &v9fs_dentry_operations;
- inode = v9fs_get_inode(sb, S_IFDIR | mode);
+ inode = v9fs_get_inode(sb, S_IFDIR | mode, 0);
if (IS_ERR(inode)) {
retval = PTR_ERR(inode);
goto release_sb;
WARN_ON_ONCE(bdev->bd_holders);
sync_blockdev(bdev);
kill_bdev(bdev);
+ /* ->release can cause the old bdi to disappear,
+ * so must switch it out first
+ */
+ bdev_inode_switch_bdi(bdev->bd_inode,
+ &default_backing_dev_info);
}
if (bdev->bd_contains == bdev) {
if (disk->fops->release)
disk_put_part(bdev->bd_part);
bdev->bd_part = NULL;
bdev->bd_disk = NULL;
- bdev_inode_switch_bdi(bdev->bd_inode,
- &default_backing_dev_info);
if (bdev != bdev->bd_contains)
victim = bdev->bd_contains;
bdev->bd_contains = NULL;
{
u64 ino = BTRFS_I(inode)->location.objectid;
- if (ino <= BTRFS_FIRST_FREE_OBJECTID)
+ /*
+ * !ino: btree_inode
+ * type == BTRFS_ROOT_ITEM_KEY: subvol dir
+ */
+ if (!ino || BTRFS_I(inode)->location.type == BTRFS_ROOT_ITEM_KEY)
ino = inode->i_ino;
return ino;
}
* read from the commit root and sidestep a nasty deadlock
* between reading the free space cache and updating the csum tree.
*/
- if (btrfs_is_free_space_inode(root, inode))
+ if (btrfs_is_free_space_inode(root, inode)) {
path->search_commit_root = 1;
+ path->skip_locking = 1;
+ }
disk_bytenr = (u64)bio->bi_sector << 9;
if (dio)
* on error we return an unlocked page and the error value
* on success we return a locked page and 0
*/
-static int prepare_uptodate_page(struct page *page, u64 pos)
+static int prepare_uptodate_page(struct page *page, u64 pos,
+ bool force_uptodate)
{
int ret = 0;
- if ((pos & (PAGE_CACHE_SIZE - 1)) && !PageUptodate(page)) {
+ if (((pos & (PAGE_CACHE_SIZE - 1)) || force_uptodate) &&
+ !PageUptodate(page)) {
ret = btrfs_readpage(NULL, page);
if (ret)
return ret;
static noinline int prepare_pages(struct btrfs_root *root, struct file *file,
struct page **pages, size_t num_pages,
loff_t pos, unsigned long first_index,
- size_t write_bytes)
+ size_t write_bytes, bool force_uptodate)
{
struct extent_state *cached_state = NULL;
int i;
start_pos = pos & ~((u64)root->sectorsize - 1);
last_pos = ((u64)index + num_pages) << PAGE_CACHE_SHIFT;
- if (start_pos > inode->i_size) {
- err = btrfs_cont_expand(inode, i_size_read(inode), start_pos);
- if (err)
- return err;
- }
-
again:
for (i = 0; i < num_pages; i++) {
pages[i] = find_or_create_page(inode->i_mapping, index + i,
}
if (i == 0)
- err = prepare_uptodate_page(pages[i], pos);
+ err = prepare_uptodate_page(pages[i], pos,
+ force_uptodate);
if (i == num_pages - 1)
err = prepare_uptodate_page(pages[i],
- pos + write_bytes);
+ pos + write_bytes, false);
if (err) {
page_cache_release(pages[i]);
faili = i - 1;
size_t num_written = 0;
int nrptrs;
int ret = 0;
+ bool force_page_uptodate = false;
nrptrs = min((iov_iter_count(i) + PAGE_CACHE_SIZE - 1) /
PAGE_CACHE_SIZE, PAGE_CACHE_SIZE /
* contents of pages from loop to loop
*/
ret = prepare_pages(root, file, pages, num_pages,
- pos, first_index, write_bytes);
+ pos, first_index, write_bytes,
+ force_page_uptodate);
if (ret) {
btrfs_delalloc_release_space(inode,
num_pages << PAGE_CACHE_SHIFT);
if (copied < write_bytes)
nrptrs = 1;
- if (copied == 0)
+ if (copied == 0) {
+ force_page_uptodate = true;
dirty_pages = 0;
- else
+ } else {
+ force_page_uptodate = false;
dirty_pages = (copied + offset +
PAGE_CACHE_SIZE - 1) >>
PAGE_CACHE_SHIFT;
+ }
/*
* If we had a short copy we need to release the excess delaloc
struct inode *inode = fdentry(file)->d_inode;
struct btrfs_root *root = BTRFS_I(inode)->root;
loff_t *ppos = &iocb->ki_pos;
+ u64 start_pos;
ssize_t num_written = 0;
ssize_t err = 0;
size_t count, ocount;
file_update_time(file);
BTRFS_I(inode)->sequence++;
+ start_pos = round_down(pos, root->sectorsize);
+ if (start_pos > i_size_read(inode)) {
+ err = btrfs_cont_expand(inode, i_size_read(inode), start_pos);
+ if (err) {
+ mutex_unlock(&inode->i_mutex);
+ goto out;
+ }
+ }
+
if (unlikely(file->f_flags & O_DIRECT)) {
num_written = __btrfs_direct_write(iocb, iov, nr_segs,
pos, ppos, count, ocount);
goto out;
case SEEK_DATA:
case SEEK_HOLE:
+ if (offset >= i_size_read(inode)) {
+ mutex_unlock(&inode->i_mutex);
+ return -ENXIO;
+ }
+
ret = find_desired_extent(inode, &offset, origin);
if (ret) {
mutex_unlock(&inode->i_mutex);
}
if (offset < 0 && !(file->f_mode & FMODE_UNSIGNED_OFFSET)) {
- ret = -EINVAL;
+ offset = -EINVAL;
goto out;
}
if (offset > inode->i_sb->s_maxbytes) {
- ret = -EINVAL;
+ offset = -EINVAL;
goto out;
}
struct btrfs_path *path,
struct inode *inode)
{
+ struct btrfs_block_rsv *rsv;
loff_t oldsize;
int ret = 0;
+ rsv = trans->block_rsv;
trans->block_rsv = root->orphan_block_rsv;
ret = btrfs_block_rsv_check(trans, root,
root->orphan_block_rsv,
*/
ret = btrfs_truncate_inode_items(trans, root, inode,
0, BTRFS_EXTENT_DATA_KEY);
+
+ trans->block_rsv = rsv;
if (ret) {
WARN_ON(1);
return ret;
&ordered_extent->list);
ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent);
- if (!ret) {
+ if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) {
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
}
err = btrfs_drop_extents(trans, inode, cur_offset,
cur_offset + hole_size,
&hint_byte, 1);
- if (err)
+ if (err) {
+ btrfs_end_transaction(trans, root);
break;
+ }
err = btrfs_insert_file_extent(trans, root,
btrfs_ino(inode), cur_offset, 0,
0, hole_size, 0, hole_size,
0, 0, 0);
- if (err)
+ if (err) {
+ btrfs_end_transaction(trans, root);
break;
+ }
btrfs_drop_extent_cache(inode, hole_start,
last_byte - 1, 0);
struct btrfs_root *root, int *new)
{
struct inode *inode;
- int bad_inode = 0;
inode = btrfs_iget_locked(s, location->objectid, root);
if (!inode)
if (new)
*new = 1;
} else {
- bad_inode = 1;
+ unlock_new_inode(inode);
+ iput(inode);
+ inode = ERR_PTR(-ESTALE);
}
}
- if (bad_inode) {
- iput(inode);
- inode = ERR_PTR(-ESTALE);
- }
-
return inode;
}
memcpy(&location, dentry->d_fsdata, sizeof(struct btrfs_key));
kfree(dentry->d_fsdata);
dentry->d_fsdata = NULL;
- d_clear_need_lookup(dentry);
+ /* This thing is hashed, drop it for now */
+ d_drop(dentry);
} else {
ret = btrfs_inode_by_name(dir, dentry, &location);
}
static struct dentry *btrfs_lookup(struct inode *dir, struct dentry *dentry,
struct nameidata *nd)
{
- return d_splice_alias(btrfs_lookup_dentry(dir, dentry), dentry);
+ struct dentry *ret;
+
+ ret = d_splice_alias(btrfs_lookup_dentry(dir, dentry), dentry);
+ if (unlikely(d_need_lookup(dentry))) {
+ spin_lock(&dentry->d_lock);
+ dentry->d_flags &= ~DCACHE_NEED_LOOKUP;
+ spin_unlock(&dentry->d_lock);
+ }
+ return ret;
}
unsigned char btrfs_filetype_table[] = {
/* special case for "." */
if (filp->f_pos == 0) {
- over = filldir(dirent, ".", 1, 1, btrfs_ino(inode), DT_DIR);
+ over = filldir(dirent, ".", 1,
+ filp->f_pos, btrfs_ino(inode), DT_DIR);
if (over)
return 0;
filp->f_pos = 1;
if (filp->f_pos == 1) {
u64 pino = parent_ino(filp->f_path.dentry);
over = filldir(dirent, "..", 2,
- 2, pino, DT_DIR);
+ filp->f_pos, pino, DT_DIR);
if (over)
return 0;
filp->f_pos = 2;
add_pending_csums(trans, inode, ordered->file_offset, &ordered->list);
ret = btrfs_ordered_update_i_size(inode, 0, ordered);
- if (!ret)
+ if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags))
btrfs_update_inode(trans, root, inode);
ret = 0;
out_unlock:
if (!(src_file->f_mode & FMODE_READ))
goto out_fput;
+ /* don't make the dst file partly checksummed */
+ if ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) !=
+ (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM))
+ goto out_fput;
+
ret = -EISDIR;
if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode))
goto out_fput;
!IS_ALIGNED(destoff, bs))
goto out_unlock;
+ if (destoff > inode->i_size) {
+ ret = btrfs_cont_expand(inode, inode->i_size, destoff);
+ if (ret)
+ goto out_unlock;
+ }
+
+ /* truncate page cache pages from target inode range */
+ truncate_inode_pages_range(&inode->i_data, destoff,
+ PAGE_CACHE_ALIGN(destoff + len) - 1);
+
/* do any pending delalloc/csum calc on src, one way or
another, and lock file content */
while (1) {
btrfs_wait_ordered_range(src, off, len);
}
- /* truncate page cache pages from target inode range */
- truncate_inode_pages_range(&inode->i_data, off,
- ALIGN(off + len, PAGE_CACHE_SIZE) - 1);
-
/* clone data */
key.objectid = btrfs_ino(src);
key.type = BTRFS_EXTENT_DATA_KEY;
else
new_key.offset = destoff;
- trans = btrfs_start_transaction(root, 1);
+ /*
+ * 1 - adjusting old extent (we may have to split it)
+ * 1 - add new extent
+ * 1 - inode update
+ */
+ trans = btrfs_start_transaction(root, 3);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
goto out;
if (type == BTRFS_FILE_EXTENT_REG ||
type == BTRFS_FILE_EXTENT_PREALLOC) {
+ /*
+ * a | --- range to clone ---| b
+ * | ------------- extent ------------- |
+ */
+
+ /* substract range b */
+ if (key.offset + datal > off + len)
+ datal = off + len - key.offset;
+
+ /* substract range a */
if (off > key.offset) {
datao += off - key.offset;
datal -= off - key.offset;
}
- if (key.offset + datal > off + len)
- datal = off + len - key.offset;
-
ret = btrfs_drop_extents(trans, inode,
new_key.offset,
new_key.offset + datal,
if (endoff > inode->i_size)
btrfs_i_size_write(inode, endoff);
- BTRFS_I(inode)->flags = BTRFS_I(src)->flags;
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
btrfs_end_transaction(trans, root);
struct btrfs_root *tree_root = fs_info->tree_root;
struct btrfs_root *root = pending->root;
struct btrfs_root *parent_root;
+ struct btrfs_block_rsv *rsv;
struct inode *parent_inode;
struct dentry *parent;
struct dentry *dentry;
u64 objectid;
u64 root_flags;
+ rsv = trans->block_rsv;
+
new_root_item = kmalloc(sizeof(*new_root_item), GFP_NOFS);
if (!new_root_item) {
pending->error = -ENOMEM;
btrfs_orphan_post_snapshot(trans, pending);
fail:
kfree(new_root_item);
+ trans->block_rsv = rsv;
btrfs_block_rsv_release(root, &pending->block_rsv, (u64)-1);
return 0;
}
if (ret)
goto out;
btrfs_release_path(path);
+
+ /*
+ * remove the attribute
+ */
+ if (!value)
+ goto out;
}
again:
return ret;
}
+/*
+ * @value: "" makes the attribute to empty, NULL removes it
+ */
int __btrfs_setxattr(struct btrfs_trans_handle *trans,
struct inode *inode, const char *name,
const void *value, size_t size, int flags)
r = build_dentry_path(rdentry, ppath, pathlen, ino, freepath);
dout(" dentry %p %llx/%.*s\n", rdentry, *ino, *pathlen,
*ppath);
- } else if (rpath) {
+ } else if (rpath || rino) {
*ino = rino;
*ppath = rpath;
*pathlen = strlen(rpath);
fsc = create_fs_client(fsopt, opt);
if (IS_ERR(fsc)) {
res = ERR_CAST(fsc);
- kfree(fsopt);
- kfree(opt);
+ destroy_mount_options(fsopt);
+ ceph_destroy_options(opt);
goto out_final;
}
build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp)
{
unsigned int dlen;
- unsigned int wlen;
- unsigned int size = 6 * sizeof(struct ntlmssp2_name);
- __le64 curtime;
+ unsigned int size = 2 * sizeof(struct ntlmssp2_name);
char *defdmname = "WORKGROUP";
unsigned char *blobptr;
struct ntlmssp2_name *attrptr;
}
dlen = strlen(ses->domainName);
- wlen = strlen(ses->server->hostname);
- /* The length of this blob is a size which is
- * six times the size of a structure which holds name/size +
- * two times the unicode length of a domain name +
- * two times the unicode length of a server name +
- * size of a timestamp (which is 8 bytes).
+ /*
+ * The length of this blob is two times the size of a
+ * structure (av pair) which holds name/size
+ * ( for NTLMSSP_AV_NB_DOMAIN_NAME followed by NTLMSSP_AV_EOL ) +
+ * unicode length of a netbios domain name
*/
- ses->auth_key.len = size + 2 * (2 * dlen) + 2 * (2 * wlen) + 8;
+ ses->auth_key.len = size + 2 * dlen;
ses->auth_key.response = kzalloc(ses->auth_key.len, GFP_KERNEL);
if (!ses->auth_key.response) {
ses->auth_key.len = 0;
blobptr = ses->auth_key.response;
attrptr = (struct ntlmssp2_name *) blobptr;
+ /*
+ * As defined in MS-NTLM 3.3.2, just this av pair field
+ * is sufficient as part of the temp
+ */
attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_DOMAIN_NAME);
attrptr->length = cpu_to_le16(2 * dlen);
blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp);
- blobptr += 2 * dlen;
- attrptr = (struct ntlmssp2_name *) blobptr;
-
- attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_COMPUTER_NAME);
- attrptr->length = cpu_to_le16(2 * wlen);
- blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
- cifs_strtoUCS((__le16 *)blobptr, ses->server->hostname, wlen, nls_cp);
-
- blobptr += 2 * wlen;
- attrptr = (struct ntlmssp2_name *) blobptr;
-
- attrptr->type = cpu_to_le16(NTLMSSP_AV_DNS_DOMAIN_NAME);
- attrptr->length = cpu_to_le16(2 * dlen);
- blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
- cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp);
-
- blobptr += 2 * dlen;
- attrptr = (struct ntlmssp2_name *) blobptr;
-
- attrptr->type = cpu_to_le16(NTLMSSP_AV_DNS_COMPUTER_NAME);
- attrptr->length = cpu_to_le16(2 * wlen);
- blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
- cifs_strtoUCS((__le16 *)blobptr, ses->server->hostname, wlen, nls_cp);
-
- blobptr += 2 * wlen;
- attrptr = (struct ntlmssp2_name *) blobptr;
-
- attrptr->type = cpu_to_le16(NTLMSSP_AV_TIMESTAMP);
- attrptr->length = cpu_to_le16(sizeof(__le64));
- blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
- curtime = cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- memcpy(blobptr, &curtime, sizeof(__le64));
-
return 0;
}
struct inode *dir = dentry->d_inode;
struct dentry *child;
+ if (!dir) {
+ dput(dentry);
+ dentry = ERR_PTR(-ENOENT);
+ break;
+ }
+
/* skip separators */
while (*s == sep)
s++;
mutex_unlock(&dir->i_mutex);
dput(dentry);
dentry = child;
- if (!dentry->d_inode) {
- dput(dentry);
- dentry = ERR_PTR(-ENOENT);
- }
} while (!IS_ERR(dentry));
_FreeXid(xid);
kfree(full_path);
T2_FNEXT_RSP_PARMS *parms;
char *response_data;
int rc = 0;
- int bytes_returned, name_len;
+ int bytes_returned;
+ unsigned int name_len;
__u16 params, byte_count;
cFYI(1, "In FindNext");
/* ignore */
} else if (strnicmp(data, "guest", 5) == 0) {
/* ignore */
- } else if (strnicmp(data, "rw", 2) == 0) {
+ } else if (strnicmp(data, "rw", 2) == 0 && strlen(data) == 2) {
/* ignore */
} else if (strnicmp(data, "ro", 2) == 0) {
/* ignore */
vol->server_ino = 1;
} else if (strnicmp(data, "noserverino", 9) == 0) {
vol->server_ino = 0;
- } else if (strnicmp(data, "rwpidforward", 4) == 0) {
+ } else if (strnicmp(data, "rwpidforward", 12) == 0) {
vol->rwpidforward = 1;
} else if (strnicmp(data, "cifsacl", 7) == 0) {
vol->cifs_acl = 1;
}
#endif /* HAVE_SET_RESTORE_SIGMASK */
-long asmlinkage compat_sys_nfsservctl(int cmd, void *notused, void *notused2)
-{
- return sys_ni_syscall();
-}
-
#ifdef CONFIG_EPOLL
#ifdef HAVE_SET_RESTORE_SIGMASK
return bh;
if (buffer_uptodate(bh))
return bh;
- ll_rw_block(READ_META, 1, &bh);
+ ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh);
wait_on_buffer(bh);
if (buffer_uptodate(bh))
return bh;
trace_ext3_load_inode(inode);
get_bh(bh);
bh->b_end_io = end_buffer_read_sync;
- submit_bh(READ_META, bh);
+ submit_bh(READ | REQ_META | REQ_PRIO, bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
ext3_error(inode->i_sb, "ext3_get_inode_loc",
bh = ext3_getblk(NULL, dir, b++, 0, &err);
bh_use[ra_max] = bh;
if (bh)
- ll_rw_block(READ_META, 1, &bh);
+ ll_rw_block(READ | REQ_META | REQ_PRIO,
+ 1, &bh);
}
}
if ((bh = bh_use[ra_ptr++]) == NULL)
*/
#define EXT4_IO_END_UNWRITTEN 0x0001
#define EXT4_IO_END_ERROR 0x0002
+#define EXT4_IO_END_QUEUED 0x0004
struct ext4_io_page {
struct page *p_page;
trace_ext4_evict_inode(inode);
- mutex_lock(&inode->i_mutex);
- ext4_flush_completed_IO(inode);
- mutex_unlock(&inode->i_mutex);
ext4_ioend_wait(inode);
if (inode->i_nlink) {
return bh;
if (buffer_uptodate(bh))
return bh;
- ll_rw_block(READ_META, 1, &bh);
+ ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh);
wait_on_buffer(bh);
if (buffer_uptodate(bh))
return bh;
trace_ext4_load_inode(inode);
get_bh(bh);
bh->b_end_io = end_buffer_read_sync;
- submit_bh(READ_META, bh);
+ submit_bh(READ | REQ_META | REQ_PRIO, bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
EXT4_ERROR_INODE_BLOCK(inode, block,
bh = ext4_getblk(NULL, dir, b++, 0, &err);
bh_use[ra_max] = bh;
if (bh)
- ll_rw_block(READ_META, 1, &bh);
+ ll_rw_block(READ | REQ_META | REQ_PRIO,
+ 1, &bh);
}
}
if ((bh = bh_use[ra_ptr++]) == NULL)
unsigned long flags;
int ret;
- mutex_lock(&inode->i_mutex);
+ if (!mutex_trylock(&inode->i_mutex)) {
+ /*
+ * Requeue the work instead of waiting so that the work
+ * items queued after this can be processed.
+ */
+ queue_work(EXT4_SB(inode->i_sb)->dio_unwritten_wq, &io->work);
+ /*
+ * To prevent the ext4-dio-unwritten thread from keeping
+ * requeueing end_io requests and occupying cpu for too long,
+ * yield the cpu if it sees an end_io request that has already
+ * been requeued.
+ */
+ if (io->flag & EXT4_IO_END_QUEUED)
+ yield();
+ io->flag |= EXT4_IO_END_QUEUED;
+ return;
+ }
ret = ext4_end_io_nolock(io);
if (ret < 0) {
mutex_unlock(&inode->i_mutex);
forget->forget_one.nlookup = nlookup;
spin_lock(&fc->lock);
- fc->forget_list_tail->next = forget;
- fc->forget_list_tail = forget;
- wake_up(&fc->waitq);
- kill_fasync(&fc->fasync, SIGIO, POLL_IN);
+ if (fc->connected) {
+ fc->forget_list_tail->next = forget;
+ fc->forget_list_tail = forget;
+ wake_up(&fc->waitq);
+ kill_fasync(&fc->fasync, SIGIO, POLL_IN);
+ } else {
+ kfree(forget);
+ }
spin_unlock(&fc->lock);
}
if (outarg.namelen > FUSE_NAME_MAX)
goto err;
+ err = -EINVAL;
+ if (size != sizeof(outarg) + outarg.namelen + 1)
+ goto err;
+
name.name = buf;
name.len = outarg.namelen;
err = fuse_copy_one(cs, buf, outarg.namelen + 1);
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/compat.h>
+#include <linux/swap.h>
static const struct file_operations fuse_direct_io_file_operations;
req = ff->reserved_req;
fuse_prepare_release(ff, file->f_flags, opcode);
+ if (ff->flock) {
+ struct fuse_release_in *inarg = &req->misc.release.in;
+ inarg->release_flags |= FUSE_RELEASE_FLOCK_UNLOCK;
+ inarg->lock_owner = fuse_lock_owner_id(ff->fc,
+ (fl_owner_t) file);
+ }
/* Hold vfsmount and dentry until release is finished */
path_get(&file->f_path);
req->misc.release.path = file->f_path;
return req->misc.write.out.size;
}
-static int fuse_write_begin(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned flags,
- struct page **pagep, void **fsdata)
-{
- pgoff_t index = pos >> PAGE_CACHE_SHIFT;
-
- *pagep = grab_cache_page_write_begin(mapping, index, flags);
- if (!*pagep)
- return -ENOMEM;
- return 0;
-}
-
void fuse_write_update_size(struct inode *inode, loff_t pos)
{
struct fuse_conn *fc = get_fuse_conn(inode);
spin_unlock(&fc->lock);
}
-static int fuse_buffered_write(struct file *file, struct inode *inode,
- loff_t pos, unsigned count, struct page *page)
-{
- int err;
- size_t nres;
- struct fuse_conn *fc = get_fuse_conn(inode);
- unsigned offset = pos & (PAGE_CACHE_SIZE - 1);
- struct fuse_req *req;
-
- if (is_bad_inode(inode))
- return -EIO;
-
- /*
- * Make sure writepages on the same page are not mixed up with
- * plain writes.
- */
- fuse_wait_on_page_writeback(inode, page->index);
-
- req = fuse_get_req(fc);
- if (IS_ERR(req))
- return PTR_ERR(req);
-
- req->in.argpages = 1;
- req->num_pages = 1;
- req->pages[0] = page;
- req->page_offset = offset;
- nres = fuse_send_write(req, file, pos, count, NULL);
- err = req->out.h.error;
- fuse_put_request(fc, req);
- if (!err && !nres)
- err = -EIO;
- if (!err) {
- pos += nres;
- fuse_write_update_size(inode, pos);
- if (count == PAGE_CACHE_SIZE)
- SetPageUptodate(page);
- }
- fuse_invalidate_attr(inode);
- return err ? err : nres;
-}
-
-static int fuse_write_end(struct file *file, struct address_space *mapping,
- loff_t pos, unsigned len, unsigned copied,
- struct page *page, void *fsdata)
-{
- struct inode *inode = mapping->host;
- int res = 0;
-
- if (copied)
- res = fuse_buffered_write(file, inode, pos, copied, page);
-
- unlock_page(page);
- page_cache_release(page);
- return res;
-}
-
static size_t fuse_send_write_pages(struct fuse_req *req, struct file *file,
struct inode *inode, loff_t pos,
size_t count)
pagefault_enable();
flush_dcache_page(page);
+ mark_page_accessed(page);
+
if (!tmp) {
unlock_page(page);
page_cache_release(page);
struct fuse_conn *fc = get_fuse_conn(inode);
int err;
- if (fc->no_lock) {
+ if (fc->no_flock) {
err = flock_lock_file_wait(file, fl);
} else {
+ struct fuse_file *ff = file->private_data;
+
/* emulate flock with POSIX locks */
fl->fl_owner = (fl_owner_t) file;
+ ff->flock = true;
err = fuse_setlk(file, fl, 1);
}
.readpage = fuse_readpage,
.writepage = fuse_writepage,
.launder_page = fuse_launder_page,
- .write_begin = fuse_write_begin,
- .write_end = fuse_write_end,
.readpages = fuse_readpages,
.set_page_dirty = __set_page_dirty_nobuffers,
.bmap = fuse_bmap,
/** Wait queue head for poll */
wait_queue_head_t poll_wait;
+
+ /** Has flock been performed on this file? */
+ bool flock:1;
};
/** One input argument of a request */
/** Is removexattr not implemented by fs? */
unsigned no_removexattr:1;
- /** Are file locking primitives not implemented by fs? */
+ /** Are posix file locking primitives not implemented by fs? */
unsigned no_lock:1;
/** Is access not implemented by fs? */
/** Don't apply umask to creation modes */
unsigned dont_mask:1;
+ /** Are BSD file locking primitives not implemented by fs? */
+ unsigned no_flock:1;
+
/** The number of requests waiting for completion */
atomic_t num_waiting;
unsigned blksize;
};
-struct fuse_forget_link *fuse_alloc_forget()
+struct fuse_forget_link *fuse_alloc_forget(void)
{
return kzalloc(sizeof(struct fuse_forget_link), GFP_KERNEL);
}
fc->async_read = 1;
if (!(arg->flags & FUSE_POSIX_LOCKS))
fc->no_lock = 1;
+ if (arg->minor >= 17) {
+ if (!(arg->flags & FUSE_FLOCK_LOCKS))
+ fc->no_flock = 1;
+ } else {
+ if (!(arg->flags & FUSE_POSIX_LOCKS))
+ fc->no_flock = 1;
+ }
if (arg->flags & FUSE_ATOMIC_O_TRUNC)
fc->atomic_o_trunc = 1;
if (arg->minor >= 9) {
} else {
ra_pages = fc->max_read / PAGE_CACHE_SIZE;
fc->no_lock = 1;
+ fc->no_flock = 1;
}
fc->bdi.ra_pages = min(fc->bdi.ra_pages, ra_pages);
arg->minor = FUSE_KERNEL_MINOR_VERSION;
arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE;
arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC |
- FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK;
+ FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK |
+ FUSE_FLOCK_LOCKS;
req->in.h.opcode = FUSE_INIT;
req->in.numargs = 1;
req->in.args[0].size = sizeof(*arg);
bh->b_end_io = end_buffer_write_sync;
get_bh(bh);
if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags))
- submit_bh(WRITE_SYNC | REQ_META, bh);
+ submit_bh(WRITE_SYNC | REQ_META | REQ_PRIO, bh);
else
- submit_bh(WRITE_FLUSH_FUA | REQ_META, bh);
+ submit_bh(WRITE_FLUSH_FUA | REQ_META | REQ_PRIO, bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh))
{
struct buffer_head *bh, *head;
int nr_underway = 0;
- int write_op = REQ_META |
+ int write_op = REQ_META | REQ_PRIO |
(wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE);
BUG_ON(!PageLocked(page));
}
bh->b_end_io = end_buffer_read_sync;
get_bh(bh);
- submit_bh(READ_SYNC | REQ_META, bh);
+ submit_bh(READ_SYNC | REQ_META | REQ_PRIO, bh);
if (!(flags & DIO_WAIT))
return 0;
if (buffer_uptodate(first_bh))
goto out;
if (!buffer_locked(first_bh))
- ll_rw_block(READ_SYNC | REQ_META, 1, &first_bh);
+ ll_rw_block(READ_SYNC | REQ_META | REQ_PRIO, 1, &first_bh);
dblock++;
extlen--;
bio->bi_end_io = end_bio_io_page;
bio->bi_private = page;
- submit_bio(READ_SYNC | REQ_META, bio);
+ submit_bio(READ_SYNC | REQ_META | REQ_PRIO, bio);
wait_on_page_locked(page);
bio_put(bio);
if (!PageUptodate(page)) {
set_buffer_uptodate(bh);
if (!buffer_uptodate(bh)) {
- ll_rw_block(READ_META, 1, &bh);
+ ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh))
goto unlock_out;
struct inode *root, *inode;
struct qstr str;
struct nls_table *nls = NULL;
+ u64 last_fs_block, last_fs_page;
int err;
err = -EINVAL;
if (!sbi->rsrc_clump_blocks)
sbi->rsrc_clump_blocks = 1;
- err = generic_check_addressable(sbi->alloc_blksz_shift,
- sbi->total_blocks);
- if (err) {
+ err = -EFBIG;
+ last_fs_block = sbi->total_blocks - 1;
+ last_fs_page = (last_fs_block << sbi->alloc_blksz_shift) >>
+ PAGE_CACHE_SHIFT;
+
+ if ((last_fs_block > (sector_t)(~0ULL) >> (sbi->alloc_blksz_shift - 9)) ||
+ (last_fs_page > (pgoff_t)(~0ULL))) {
printk(KERN_ERR "hfs: filesystem size too large.\n");
goto out_free_vhdr;
}
out_close_ext_tree:
hfs_btree_close(sbi->ext_tree);
out_free_vhdr:
- kfree(sbi->s_vhdr);
- kfree(sbi->s_backup_vhdr);
+ kfree(sbi->s_vhdr_buf);
+ kfree(sbi->s_backup_vhdr_buf);
out_unload_nls:
unload_nls(sbi->nls);
unload_nls(nls);
return 0;
out_free_backup_vhdr:
- kfree(sbi->s_backup_vhdr);
+ kfree(sbi->s_backup_vhdr_buf);
out_free_vhdr:
- kfree(sbi->s_vhdr);
+ kfree(sbi->s_vhdr_buf);
out:
return error;
}
inode->i_op = &page_symlink_inode_operations;
break;
}
+ lockdep_annotate_inode_mutex_key(inode);
}
return inode;
}
}
EXPORT_SYMBOL(new_inode);
-/**
- * unlock_new_inode - clear the I_NEW state and wake up any waiters
- * @inode: new inode to unlock
- *
- * Called when the inode is fully initialised to clear the new state of the
- * inode and wake up anyone waiting for the inode to finish initialisation.
- */
-void unlock_new_inode(struct inode *inode)
-{
#ifdef CONFIG_DEBUG_LOCK_ALLOC
+void lockdep_annotate_inode_mutex_key(struct inode *inode)
+{
if (S_ISDIR(inode->i_mode)) {
struct file_system_type *type = inode->i_sb->s_type;
&type->i_mutex_dir_key);
}
}
+}
+EXPORT_SYMBOL(lockdep_annotate_inode_mutex_key);
#endif
+
+/**
+ * unlock_new_inode - clear the I_NEW state and wake up any waiters
+ * @inode: new inode to unlock
+ *
+ * Called when the inode is fully initialised to clear the new state of the
+ * inode and wake up anyone waiting for the inode to finish initialisation.
+ */
+void unlock_new_inode(struct inode *inode)
+{
+ lockdep_annotate_inode_mutex_key(inode);
spin_lock(&inode->i_lock);
WARN_ON(!(inode->i_state & I_NEW));
inode->i_state &= ~I_NEW;
if (!path->dentry->d_op || !path->dentry->d_op->d_automount)
return -EREMOTE;
- /* We don't want to mount if someone supplied AT_NO_AUTOMOUNT
- * and this is the terminal part of the path.
+ /* We don't want to mount if someone's just doing a stat -
+ * unless they're stat'ing a directory and appended a '/' to
+ * the name.
+ *
+ * We do, however, want to mount if someone wants to open or
+ * create a file of any type under the mountpoint, wants to
+ * traverse through the mountpoint or wants to open the
+ * mounted directory. Also, autofs may mark negative dentries
+ * as being automount points. These will need the attentions
+ * of the daemon to instantiate them before they can be used.
*/
- if ((flags & LOOKUP_NO_AUTOMOUNT) && !(flags & LOOKUP_PARENT))
- return -EISDIR; /* we actually want to stop here */
+ if (!(flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY |
+ LOOKUP_OPEN | LOOKUP_CREATE | LOOKUP_AUTOMOUNT)) &&
+ path->dentry->d_inode)
+ return -EISDIR;
- /*
- * We don't want to mount if someone's just doing a stat and they've
- * set AT_SYMLINK_NOFOLLOW - unless they're stat'ing a directory and
- * appended a '/' to the name.
- */
- if (!(flags & LOOKUP_FOLLOW)) {
- /* We do, however, want to mount if someone wants to open or
- * create a file of any type under the mountpoint, wants to
- * traverse through the mountpoint or wants to open the mounted
- * directory.
- * Also, autofs may mark negative dentries as being automount
- * points. These will need the attentions of the daemon to
- * instantiate them before they can be used.
- */
- if (!(flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY |
- LOOKUP_OPEN | LOOKUP_CREATE)) &&
- path->dentry->d_inode)
- return -EISDIR;
- }
current->total_link_count++;
if (current->total_link_count >= 40)
return -ELOOP;
if (!dir->i_op->rmdir)
return -EPERM;
+ dget(dentry);
mutex_lock(&dentry->d_inode->i_mutex);
error = -EBUSY;
out:
mutex_unlock(&dentry->d_inode->i_mutex);
+ dput(dentry);
if (!error)
d_delete(dentry);
return error;
if (error)
return error;
+ dget(new_dentry);
if (target)
mutex_lock(&target->i_mutex);
out:
if (target)
mutex_unlock(&target->i_mutex);
+ dput(new_dentry);
if (!error)
if (!(old_dir->i_sb->s_type->fs_flags & FS_RENAME_DOES_D_MOVE))
d_move(old_dentry,new_dentry);
return err;
if (!old_name || !*old_name)
return -EINVAL;
- err = kern_path(old_name, LOOKUP_FOLLOW, &old_path);
+ err = kern_path(old_name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &old_path);
if (err)
return err;
NFS4_SESSION_DRAINING,
};
+#define NFS4_RENEW_TIMEOUT 0x01
+#define NFS4_RENEW_DELEGATION_CB 0x02
+
struct nfs4_minor_version_ops {
u32 minor_version;
};
struct nfs4_state_maintenance_ops {
- int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *);
+ int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *, unsigned);
struct rpc_cred * (*get_state_renewal_cred_locked)(struct nfs_client *);
int (*renew_lease)(struct nfs_client *, struct rpc_cred *);
};
extern int nfs4_proc_setclientid(struct nfs_client *, u32, unsigned short, struct rpc_cred *, struct nfs4_setclientid_res *);
extern int nfs4_proc_setclientid_confirm(struct nfs_client *, struct nfs4_setclientid_res *arg, struct rpc_cred *);
extern int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred);
-extern int nfs4_proc_async_renew(struct nfs_client *, struct rpc_cred *);
-extern int nfs4_proc_renew(struct nfs_client *, struct rpc_cred *);
extern int nfs4_init_clientid(struct nfs_client *, struct rpc_cred *);
extern int nfs41_init_clientid(struct nfs_client *, struct rpc_cred *);
extern int nfs4_do_close(struct nfs4_state *state, gfp_t gfp_mask, int wait, bool roc);
extern void nfs4_state_set_mode_locked(struct nfs4_state *, fmode_t);
extern void nfs4_schedule_lease_recovery(struct nfs_client *);
extern void nfs4_schedule_state_manager(struct nfs_client *);
+extern void nfs4_schedule_path_down_recovery(struct nfs_client *clp);
extern void nfs4_schedule_stateid_recovery(const struct nfs_server *, struct nfs4_state *);
extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags);
extern void nfs41_handle_recall_slot(struct nfs_client *clp);
if (task->tk_status < 0) {
/* Unless we're shutting down, schedule state recovery! */
- if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) != 0)
+ if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) == 0)
+ return;
+ if (task->tk_status != NFS4ERR_CB_PATH_DOWN) {
nfs4_schedule_lease_recovery(clp);
- return;
+ return;
+ }
+ nfs4_schedule_path_down_recovery(clp);
}
do_renew_lease(clp, timestamp);
}
.rpc_release = nfs4_renew_release,
};
-int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred)
+static int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred, unsigned renew_flags)
{
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RENEW],
};
struct nfs4_renewdata *data;
+ if (renew_flags == 0)
+ return 0;
if (!atomic_inc_not_zero(&clp->cl_count))
return -EIO;
- data = kmalloc(sizeof(*data), GFP_KERNEL);
+ data = kmalloc(sizeof(*data), GFP_NOFS);
if (data == NULL)
return -ENOMEM;
data->client = clp;
&nfs4_renew_ops, data);
}
-int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred)
+static int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred)
{
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RENEW],
return rpc_run_task(&task_setup_data);
}
-static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred)
+static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred, unsigned renew_flags)
{
struct rpc_task *task;
int ret = 0;
+ if ((renew_flags & NFS4_RENEW_TIMEOUT) == 0)
+ return 0;
task = _nfs41_proc_sequence(clp, cred);
if (IS_ERR(task))
ret = PTR_ERR(task);
struct rpc_cred *cred;
long lease;
unsigned long last, now;
+ unsigned renew_flags = 0;
ops = clp->cl_mvops->state_renewal_ops;
dprintk("%s: start\n", __func__);
last = clp->cl_last_renewal;
now = jiffies;
/* Are we close to a lease timeout? */
- if (time_after(now, last + lease/3)) {
+ if (time_after(now, last + lease/3))
+ renew_flags |= NFS4_RENEW_TIMEOUT;
+ if (nfs_delegations_present(clp))
+ renew_flags |= NFS4_RENEW_DELEGATION_CB;
+
+ if (renew_flags != 0) {
cred = ops->get_state_renewal_cred_locked(clp);
spin_unlock(&clp->cl_lock);
if (cred == NULL) {
- if (!nfs_delegations_present(clp)) {
+ if (!(renew_flags & NFS4_RENEW_DELEGATION_CB)) {
set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
goto out;
}
nfs_expire_all_delegations(clp);
} else {
/* Queue an asynchronous RENEW. */
- ops->sched_state_renewal(clp, cred);
+ ops->sched_state_renewal(clp, cred, renew_flags);
put_rpccred(cred);
goto out_exp;
}
nfs4_schedule_state_manager(clp);
}
+void nfs4_schedule_path_down_recovery(struct nfs_client *clp)
+{
+ nfs_handle_cb_pathdown(clp);
+ nfs4_schedule_state_manager(clp);
+}
+
static int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state)
{
sb->s_blocksize = nfs_block_bits(server->wsize,
&sb->s_blocksize_bits);
- if (server->flags & NFS_MOUNT_NOAC)
- sb->s_flags |= MS_SYNCHRONOUS;
-
sb->s_bdi = &server->backing_dev_info;
nfs_super_set_maxbytes(sb, server->maxfilesize);
if (server->flags & NFS_MOUNT_UNSHARED)
compare_super = NULL;
+ /* -o noac implies -o sync */
+ if (server->flags & NFS_MOUNT_NOAC)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(fs_type, compare_super, nfs_set_super, &sb_mntdata);
if (IS_ERR(s)) {
if (server->flags & NFS_MOUNT_UNSHARED)
compare_super = NULL;
+ /* -o noac implies -o sync */
+ if (server->flags & NFS_MOUNT_NOAC)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(&nfs_fs_type, compare_super, nfs_set_super, &sb_mntdata);
if (IS_ERR(s)) {
if (server->flags & NFS4_MOUNT_UNSHARED)
compare_super = NULL;
+ /* -o noac implies -o sync */
+ if (server->flags & NFS_MOUNT_NOAC)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata);
if (IS_ERR(s)) {
goto out_put_mnt_ns;
ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt,
- export_path, LOOKUP_FOLLOW, &path);
+ export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
nfs_referral_loop_unprotect();
put_mnt_ns(ns_private);
if (server->flags & NFS4_MOUNT_UNSHARED)
compare_super = NULL;
+ /* -o noac implies -o sync */
+ if (server->flags & NFS_MOUNT_NOAC)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata);
if (IS_ERR(s)) {
if (server->flags & NFS4_MOUNT_UNSHARED)
compare_super = NULL;
+ /* -o noac implies -o sync */
+ if (server->flags & NFS_MOUNT_NOAC)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata);
if (IS_ERR(s)) {
if (!data)
goto out_bad;
data->pagevec[0] = page;
- nfs_write_rpcsetup(req, data, wsize, offset, desc->pg_ioflags);
+ nfs_write_rpcsetup(req, data, len, offset, desc->pg_ioflags);
list_add(&data->list, res);
requests++;
nbytes -= len;
struct numa_maps md;
};
-static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty)
+static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty,
+ unsigned long nr_pages)
{
int count = page_mapcount(page);
- md->pages++;
+ md->pages += nr_pages;
if (pte_dirty || PageDirty(page))
- md->dirty++;
+ md->dirty += nr_pages;
if (PageSwapCache(page))
- md->swapcache++;
+ md->swapcache += nr_pages;
if (PageActive(page) || PageUnevictable(page))
- md->active++;
+ md->active += nr_pages;
if (PageWriteback(page))
- md->writeback++;
+ md->writeback += nr_pages;
if (PageAnon(page))
- md->anon++;
+ md->anon += nr_pages;
if (count > md->mapcount_max)
md->mapcount_max = count;
- md->node[page_to_nid(page)]++;
+ md->node[page_to_nid(page)] += nr_pages;
+}
+
+static struct page *can_gather_numa_stats(pte_t pte, struct vm_area_struct *vma,
+ unsigned long addr)
+{
+ struct page *page;
+ int nid;
+
+ if (!pte_present(pte))
+ return NULL;
+
+ page = vm_normal_page(vma, addr, pte);
+ if (!page)
+ return NULL;
+
+ if (PageReserved(page))
+ return NULL;
+
+ nid = page_to_nid(page);
+ if (!node_isset(nid, node_states[N_HIGH_MEMORY]))
+ return NULL;
+
+ return page;
}
static int gather_pte_stats(pmd_t *pmd, unsigned long addr,
pte_t *pte;
md = walk->private;
- orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
- do {
- struct page *page;
- int nid;
+ spin_lock(&walk->mm->page_table_lock);
+ if (pmd_trans_huge(*pmd)) {
+ if (pmd_trans_splitting(*pmd)) {
+ spin_unlock(&walk->mm->page_table_lock);
+ wait_split_huge_page(md->vma->anon_vma, pmd);
+ } else {
+ pte_t huge_pte = *(pte_t *)pmd;
+ struct page *page;
- if (!pte_present(*pte))
- continue;
+ page = can_gather_numa_stats(huge_pte, md->vma, addr);
+ if (page)
+ gather_stats(page, md, pte_dirty(huge_pte),
+ HPAGE_PMD_SIZE/PAGE_SIZE);
+ spin_unlock(&walk->mm->page_table_lock);
+ return 0;
+ }
+ } else {
+ spin_unlock(&walk->mm->page_table_lock);
+ }
- page = vm_normal_page(md->vma, addr, *pte);
+ orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
+ do {
+ struct page *page = can_gather_numa_stats(*pte, md->vma, addr);
if (!page)
continue;
-
- if (PageReserved(page))
- continue;
-
- nid = page_to_nid(page);
- if (!node_isset(nid, node_states[N_HIGH_MEMORY]))
- continue;
-
- gather_stats(page, md, pte_dirty(*pte));
+ gather_stats(page, md, pte_dirty(*pte), 1);
} while (pte++, addr += PAGE_SIZE, addr != end);
pte_unmap_unlock(orig_pte, ptl);
return 0;
md = walk->private;
- gather_stats(page, md, pte_dirty(*pte));
+ gather_stats(page, md, pte_dirty(*pte), 1);
return 0;
}
* resolution (think about autofs) and thus deadlocks could arise.
*/
if (cmds == Q_QUOTAON) {
- ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW, &path);
+ ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
if (ret)
pathp = ERR_PTR(ret);
else
if (!(flag & AT_SYMLINK_NOFOLLOW))
lookup_flags |= LOOKUP_FOLLOW;
- if (flag & AT_NO_AUTOMOUNT)
- lookup_flags |= LOOKUP_NO_AUTOMOUNT;
if (flag & AT_EMPTY_PATH)
lookup_flags |= LOOKUP_EMPTY;
#define DBGKEY(key) ((char *)(key))
#define DBGKEY1(key) ((char *)(key))
-#define ubifs_dbg_msg(fmt, ...) do { \
- if (0) \
- pr_debug(fmt "\n", ##__VA_ARGS__); \
+#define ubifs_dbg_msg(fmt, ...) do { \
+ if (0) \
+ printk(KERN_DEBUG fmt "\n", ##__VA_ARGS__); \
} while (0)
#define dbg_dump_stack()
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
-ccflags-y := -I$(src) -I$(src)/linux-2.6
-ccflags-$(CONFIG_XFS_DEBUG) += -g
+ccflags-y += -I$(src) # needed for trace events
-XFS_LINUX := linux-2.6
+ccflags-$(CONFIG_XFS_DEBUG) += -g
obj-$(CONFIG_XFS_FS) += xfs.o
-xfs-y += linux-2.6/xfs_trace.o
-
-xfs-$(CONFIG_XFS_QUOTA) += $(addprefix quota/, \
- xfs_dquot.o \
- xfs_dquot_item.o \
- xfs_trans_dquot.o \
- xfs_qm_syscalls.o \
- xfs_qm_bhv.o \
- xfs_qm.o)
-xfs-$(CONFIG_XFS_QUOTA) += linux-2.6/xfs_quotaops.o
-
-ifeq ($(CONFIG_XFS_QUOTA),y)
-xfs-$(CONFIG_PROC_FS) += quota/xfs_qm_stats.o
-endif
-
-xfs-$(CONFIG_XFS_RT) += xfs_rtalloc.o
-xfs-$(CONFIG_XFS_POSIX_ACL) += $(XFS_LINUX)/xfs_acl.o
-xfs-$(CONFIG_PROC_FS) += $(XFS_LINUX)/xfs_stats.o
-xfs-$(CONFIG_SYSCTL) += $(XFS_LINUX)/xfs_sysctl.o
-xfs-$(CONFIG_COMPAT) += $(XFS_LINUX)/xfs_ioctl32.o
+# this one should be compiled first, as the tracing macros can easily blow up
+xfs-y += xfs_trace.o
+# highlevel code
+xfs-y += xfs_aops.o \
+ xfs_bit.o \
+ xfs_buf.o \
+ xfs_dfrag.o \
+ xfs_discard.o \
+ xfs_error.o \
+ xfs_export.o \
+ xfs_file.o \
+ xfs_filestream.o \
+ xfs_fsops.o \
+ xfs_fs_subr.o \
+ xfs_globals.o \
+ xfs_iget.o \
+ xfs_ioctl.o \
+ xfs_iomap.o \
+ xfs_iops.o \
+ xfs_itable.o \
+ xfs_message.o \
+ xfs_mru_cache.o \
+ xfs_super.o \
+ xfs_sync.o \
+ xfs_xattr.o \
+ xfs_rename.o \
+ xfs_rw.o \
+ xfs_utils.o \
+ xfs_vnodeops.o \
+ kmem.o \
+ uuid.o
+# code shared with libxfs
xfs-y += xfs_alloc.o \
xfs_alloc_btree.o \
xfs_attr.o \
xfs_attr_leaf.o \
- xfs_bit.o \
xfs_bmap.o \
xfs_bmap_btree.o \
xfs_btree.o \
- xfs_buf_item.o \
xfs_da_btree.o \
xfs_dir2.o \
xfs_dir2_block.o \
xfs_dir2_leaf.o \
xfs_dir2_node.o \
xfs_dir2_sf.o \
- xfs_error.o \
- xfs_extfree_item.o \
- xfs_filestream.o \
- xfs_fsops.o \
xfs_ialloc.o \
xfs_ialloc_btree.o \
- xfs_iget.o \
xfs_inode.o \
- xfs_inode_item.o \
- xfs_iomap.o \
- xfs_itable.o \
- xfs_dfrag.o \
- xfs_log.o \
- xfs_log_cil.o \
xfs_log_recover.o \
xfs_mount.o \
- xfs_mru_cache.o \
- xfs_rename.o \
- xfs_trans.o \
+ xfs_trans.o
+
+# low-level transaction/log code
+xfs-y += xfs_log.o \
+ xfs_log_cil.o \
+ xfs_buf_item.o \
+ xfs_extfree_item.o \
+ xfs_inode_item.o \
xfs_trans_ail.o \
xfs_trans_buf.o \
xfs_trans_extfree.o \
xfs_trans_inode.o \
- xfs_utils.o \
- xfs_vnodeops.o \
- xfs_rw.o
-
-# Objects in linux/
-xfs-y += $(addprefix $(XFS_LINUX)/, \
- kmem.o \
- xfs_aops.o \
- xfs_buf.o \
- xfs_discard.o \
- xfs_export.o \
- xfs_file.o \
- xfs_fs_subr.o \
- xfs_globals.o \
- xfs_ioctl.o \
- xfs_iops.o \
- xfs_message.o \
- xfs_super.o \
- xfs_sync.o \
- xfs_xattr.o)
-# Objects in support/
-xfs-y += support/uuid.o
+# optional features
+xfs-$(CONFIG_XFS_QUOTA) += xfs_dquot.o \
+ xfs_dquot_item.o \
+ xfs_trans_dquot.o \
+ xfs_qm_syscalls.o \
+ xfs_qm_bhv.o \
+ xfs_qm.o \
+ xfs_quotaops.o
+ifeq ($(CONFIG_XFS_QUOTA),y)
+xfs-$(CONFIG_PROC_FS) += xfs_qm_stats.o
+endif
+xfs-$(CONFIG_XFS_RT) += xfs_rtalloc.o
+xfs-$(CONFIG_XFS_POSIX_ACL) += xfs_acl.o
+xfs-$(CONFIG_PROC_FS) += xfs_stats.o
+xfs-$(CONFIG_SYSCTL) += xfs_sysctl.o
+xfs-$(CONFIG_COMPAT) += xfs_ioctl32.o
#define XFS_BUF_LOCK_TRACKING 1
#endif
-#include <linux-2.6/xfs_linux.h>
+#include "xfs_linux.h"
+
#endif /* __XFS_H__ */
bool is_async)
{
struct xfs_ioend *ioend = iocb->private;
+ struct inode *inode = ioend->io_inode;
/*
* blockdev_direct_IO can return an error even after the I/O
}
/* XXX: probably should move into the real I/O completion handler */
- inode_dio_done(ioend->io_inode);
+ inode_dio_done(inode);
}
STATIC ssize_t
}
/*
- * If the linux inode is valid, mark it dirty.
- * Used when committing a dirty inode into a transaction so that
- * the inode will get written back by the linux code
+ * If the linux inode is valid, mark it dirty, else mark the dirty state
+ * in the XFS inode to make sure we pick it up when reclaiming the inode.
*/
void
xfs_mark_inode_dirty_sync(
if (!(inode->i_state & (I_WILL_FREE|I_FREEING)))
mark_inode_dirty_sync(inode);
+ else {
+ barrier();
+ ip->i_update_core = 1;
+ }
}
void
if (!(inode->i_state & (I_WILL_FREE|I_FREEING)))
mark_inode_dirty(inode);
+ else {
+ barrier();
+ ip->i_update_core = 1;
+ }
+
}
/*
# define XFS_BIG_INUMS 0
#endif
-#include <xfs_types.h>
+#include "xfs_types.h"
-#include <kmem.h>
-#include <mrlock.h>
-#include <time.h>
-
-#include <support/uuid.h>
+#include "kmem.h"
+#include "mrlock.h"
+#include "time.h"
+#include "uuid.h"
#include <linux/semaphore.h>
#include <linux/mm.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
-#include <xfs_vnode.h>
-#include <xfs_stats.h>
-#include <xfs_sysctl.h>
-#include <xfs_iops.h>
-#include <xfs_aops.h>
-#include <xfs_super.h>
-#include <xfs_buf.h>
-#include <xfs_message.h>
+#include "xfs_vnode.h"
+#include "xfs_stats.h"
+#include "xfs_sysctl.h"
+#include "xfs_iops.h"
+#include "xfs_aops.h"
+#include "xfs_super.h"
+#include "xfs_buf.h"
+#include "xfs_message.h"
#ifdef __BIG_ENDIAN
#define XFS_NATIVE_HOST 1
#include "xfs_trans.h"
#include "xfs_bmap_btree.h"
#include "xfs_inode.h"
-#include "quota/xfs_qm.h"
+#include "xfs_qm.h"
#include <linux/quota.h>
mp->m_flags |= XFS_MOUNT_DELAYLOG;
} else if (!strcmp(this_char, MNTOPT_NODELAYLOG)) {
mp->m_flags &= ~XFS_MOUNT_DELAYLOG;
+ xfs_warn(mp,
+ "nodelaylog is deprecated and will be removed in Linux 3.3");
} else if (!strcmp(this_char, MNTOPT_DISCARD)) {
mp->m_flags |= XFS_MOUNT_DISCARD;
} else if (!strcmp(this_char, MNTOPT_NODISCARD)) {
struct xfs_trans *tp;
int error;
- xfs_iunlock(ip, XFS_ILOCK_SHARED);
tp = xfs_trans_alloc(mp, XFS_TRANS_FSYNC_TS);
error = xfs_trans_reserve(tp, 0, XFS_FSYNC_TS_LOG_RES(mp), 0, 0, 0);
-
if (error) {
xfs_trans_cancel(tp, 0);
- /* we need to return with the lock hold shared */
- xfs_ilock(ip, XFS_ILOCK_SHARED);
return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
-
- /*
- * Note - it's possible that we might have pushed ourselves out of the
- * way during trans_reserve which would flush the inode. But there's
- * no guarantee that the inode buffer has actually gone out yet (it's
- * delwri). Plus the buffer could be pinned anyway if it's part of
- * an inode in another recent transaction. So we play it safe and
- * fire off the transaction anyway.
- */
- xfs_trans_ijoin(tp, ip);
+ xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- error = xfs_trans_commit(tp, 0);
- xfs_ilock_demote(ip, XFS_ILOCK_EXCL);
-
- return error;
+ return xfs_trans_commit(tp, 0);
}
STATIC int
trace_xfs_write_inode(ip);
if (XFS_FORCED_SHUTDOWN(mp))
- return XFS_ERROR(EIO);
+ return -XFS_ERROR(EIO);
+ if (!ip->i_update_core)
+ return 0;
if (wbc->sync_mode == WB_SYNC_ALL) {
/*
* of synchronous log foces dramatically.
*/
xfs_ioend_wait(ip);
- xfs_ilock(ip, XFS_ILOCK_SHARED);
- if (ip->i_update_core) {
- error = xfs_log_inode(ip);
- if (error)
- goto out_unlock;
- }
+ error = xfs_log_inode(ip);
+ if (error)
+ goto out;
+ return 0;
} else {
/*
* We make this non-blocking if the inode is contended, return
#include "xfs_quota.h"
#include "xfs_iomap.h"
#include "xfs_aops.h"
-#include "quota/xfs_dquot_item.h"
-#include "quota/xfs_dquot.h"
+#include "xfs_dquot_item.h"
+#include "xfs_dquot.h"
#include "xfs_log_recover.h"
#include "xfs_inode_item.h"
/* fs/nfsctl.c */
#define __NR_nfsservctl 42
-__SC_COMP(__NR_nfsservctl, sys_nfsservctl, compat_sys_nfsservctl)
+__SYSCALL(__NR_nfsservctl, sys_ni_syscall)
/* fs/open.c */
#define __NR3264_statfs 43
return container_of(gc, struct bgpio_chip, gc);
}
-int __devexit bgpio_remove(struct bgpio_chip *bgc);
-int __devinit bgpio_init(struct bgpio_chip *bgc,
- struct device *dev,
- unsigned long sz,
- void __iomem *dat,
- void __iomem *set,
- void __iomem *clr,
- void __iomem *dirout,
- void __iomem *dirin,
- bool big_endian);
+int bgpio_remove(struct bgpio_chip *bgc);
+int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
+ unsigned long sz, void __iomem *dat, void __iomem *set,
+ void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
+ bool big_endian);
#endif /* __BASIC_MMIO_GPIO_H */
__REQ_SYNC, /* request is sync (sync write or read) */
__REQ_META, /* metadata io request */
+ __REQ_PRIO, /* boost priority in cfq */
__REQ_DISCARD, /* request to discard sectors */
__REQ_SECURE, /* secure discard (used with __REQ_DISCARD) */
#define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER)
#define REQ_SYNC (1 << __REQ_SYNC)
#define REQ_META (1 << __REQ_META)
+#define REQ_PRIO (1 << __REQ_PRIO)
#define REQ_DISCARD (1 << __REQ_DISCARD)
#define REQ_NOIDLE (1 << __REQ_NOIDLE)
#define REQ_FAILFAST_MASK \
(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
#define REQ_COMMON_MASK \
- (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \
- REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE)
+ (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_PRIO | \
+ REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE)
#define REQ_CLONE_MASK REQ_COMMON_MASK
#define REQ_RAHEAD (1 << __REQ_RAHEAD)
struct list_head list;
struct list_head cb_list;
unsigned int should_sort;
- unsigned int count;
};
#define BLK_MAX_REQUEST_COUNT 16
struct compat_timespec __user *tsp,
const compat_sigset_t __user *sigmask,
compat_size_t sigsetsize);
-asmlinkage long compat_sys_nfsservctl(int cmd, void *notused, void *notused2);
asmlinkage long compat_sys_signalfd4(int ufd,
const compat_sigset_t __user *sigmask,
compat_size_t sigsetsize, int flags);
/*
* connector.h
*
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004-2005 Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
#define READA RWA_MASK
#define READ_SYNC (READ | REQ_SYNC)
-#define READ_META (READ | REQ_META)
#define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE)
#define WRITE_ODIRECT (WRITE | REQ_SYNC)
-#define WRITE_META (WRITE | REQ_META)
#define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
#define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
#define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
extern struct inode * iget_locked(struct super_block *, unsigned long);
extern int insert_inode_locked4(struct inode *, unsigned long, int (*test)(struct inode *, void *), void *);
extern int insert_inode_locked(struct inode *);
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+extern void lockdep_annotate_inode_mutex_key(struct inode *inode);
+#else
+static inline void lockdep_annotate_inode_mutex_key(struct inode *inode) { };
+#endif
extern void unlock_new_inode(struct inode *);
extern unsigned int get_next_ino(void);
* - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct
* fuse_ioctl_iovec' instead of ambiguous 'struct iovec'
* - add FUSE_IOCTL_32BIT flag
+ *
+ * 7.17
+ * - add FUSE_FLOCK_LOCKS and FUSE_RELEASE_FLOCK_UNLOCK
*/
#ifndef _LINUX_FUSE_H
#define FUSE_KERNEL_VERSION 7
/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 16
+#define FUSE_KERNEL_MINOR_VERSION 17
/** The node ID of the root inode */
#define FUSE_ROOT_ID 1
/**
* INIT request/reply flags
*
+ * FUSE_POSIX_LOCKS: remote locking for POSIX file locks
* FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
* FUSE_DONT_MASK: don't apply umask to file mode on create operations
+ * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks
*/
#define FUSE_ASYNC_READ (1 << 0)
#define FUSE_POSIX_LOCKS (1 << 1)
#define FUSE_EXPORT_SUPPORT (1 << 4)
#define FUSE_BIG_WRITES (1 << 5)
#define FUSE_DONT_MASK (1 << 6)
+#define FUSE_FLOCK_LOCKS (1 << 10)
/**
* CUSE INIT request/reply flags
* Release flags
*/
#define FUSE_RELEASE_FLUSH (1 << 0)
+#define FUSE_RELEASE_FLOCK_UNLOCK (1 << 1)
/**
* Getattr flags
#endif /* CONFIG_IRQ_DOMAIN */
#if defined(CONFIG_IRQ_DOMAIN) && defined(CONFIG_OF_IRQ)
+extern struct irq_domain_ops irq_domain_simple_ops;
extern void irq_domain_add_simple(struct device_node *controller, int irq_base);
extern void irq_domain_generate_simple(const struct of_device_id *match,
u64 phys_base, unsigned int irq_start);
#define KVM_CAP_SPAPR_TCE 63
#define KVM_CAP_PPC_SMT 64
#define KVM_CAP_PPC_RMA 65
+#define KVM_CAP_S390_GMAP 71
#ifdef KVM_CAP_IRQ_ROUTING
struct mem_cgroup *mem_cont,
int active, int file);
-struct memcg_scanrecord {
- struct mem_cgroup *mem; /* scanend memory cgroup */
- struct mem_cgroup *root; /* scan target hierarchy root */
- int context; /* scanning context (see memcontrol.c) */
- unsigned long nr_scanned[2]; /* the number of scanned pages */
- unsigned long nr_rotated[2]; /* the number of rotated pages */
- unsigned long nr_freed[2]; /* the number of freed pages */
- unsigned long elapsed; /* nsec of time elapsed while scanning */
-};
-
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
/*
* All "charge" functions with gfp_mask should use GFP_KERNEL or
extern void mem_cgroup_print_oom_info(struct mem_cgroup *memcg,
struct task_struct *p);
-extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
- gfp_t gfp_mask, bool noswap,
- struct memcg_scanrecord *rec);
-extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
- gfp_t gfp_mask, bool noswap,
- struct zone *zone,
- struct memcg_scanrecord *rec,
- unsigned long *nr_scanned);
-
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
extern int do_swap_account;
#endif
struct regulator_init_data *init_data;
};
-#define WM8994_CONFIGURE_GPIO 0x8000
+#define WM8994_CONFIGURE_GPIO 0x10000
#define WM8994_DRC_REGS 5
#define WM8994_EQ_REGS 20
*/
#define LOOKUP_FOLLOW 0x0001
#define LOOKUP_DIRECTORY 0x0002
+#define LOOKUP_AUTOMOUNT 0x0004
#define LOOKUP_PARENT 0x0010
#define LOOKUP_REVAL 0x0020
#define LOOKUP_RCU 0x0040
-#define LOOKUP_NO_AUTOMOUNT 0x0080
+
/*
* Intent data
*/
extern void pcie_bus_configure_settings(struct pci_bus *bus, u8 smpss);
enum pcie_bus_config_types {
- PCIE_BUS_PERFORMANCE,
+ PCIE_BUS_TUNE_OFF,
PCIE_BUS_SAFE,
+ PCIE_BUS_PERFORMANCE,
PCIE_BUS_PEER2PEER,
};
extern int perf_num_counters(void);
extern const char *perf_pmu_name(void);
-extern void __perf_event_task_sched_in(struct task_struct *task);
-extern void __perf_event_task_sched_out(struct task_struct *task, struct task_struct *next);
+extern void __perf_event_task_sched_in(struct task_struct *prev,
+ struct task_struct *task);
+extern void __perf_event_task_sched_out(struct task_struct *prev,
+ struct task_struct *next);
extern int perf_event_init_task(struct task_struct *child);
extern void perf_event_exit_task(struct task_struct *child);
extern void perf_event_free_task(struct task_struct *task);
extern struct jump_label_key perf_sched_events;
-static inline void perf_event_task_sched_in(struct task_struct *task)
+static inline void perf_event_task_sched_in(struct task_struct *prev,
+ struct task_struct *task)
{
if (static_branch(&perf_sched_events))
- __perf_event_task_sched_in(task);
+ __perf_event_task_sched_in(prev, task);
}
-static inline void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
+static inline void perf_event_task_sched_out(struct task_struct *prev,
+ struct task_struct *next)
{
perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, NULL, 0);
- __perf_event_task_sched_out(task, next);
+ if (static_branch(&perf_sched_events))
+ __perf_event_task_sched_out(prev, next);
}
extern void perf_event_mmap(struct vm_area_struct *vma);
extern void perf_event_task_tick(void);
#else
static inline void
-perf_event_task_sched_in(struct task_struct *task) { }
+perf_event_task_sched_in(struct task_struct *prev,
+ struct task_struct *task) { }
static inline void
-perf_event_task_sched_out(struct task_struct *task,
- struct task_struct *next) { }
+perf_event_task_sched_out(struct task_struct *prev,
+ struct task_struct *next) { }
static inline int perf_event_init_task(struct task_struct *child) { return 0; }
static inline void perf_event_exit_task(struct task_struct *child) { }
static inline void perf_event_free_task(struct task_struct *task) { }
* These occupy the top three bytes.
*/
enum {
+ UNAME26 = 0x0020000,
ADDR_NO_RANDOMIZE = 0x0040000, /* disable randomization of VA space */
FDPIC_FUNCPTRS = 0x0080000, /* userspace function ptrs point to descriptors
* (signal handling)
#define PTP_CLASS_V2_VLAN (PTP_CLASS_V2 | PTP_CLASS_VLAN)
#define PTP_EV_PORT 319
+#define PTP_GEN_BIT 0x08 /* indicates general message, if set in message type */
#define OFF_ETYPE 12
#define OFF_IHL 14
{OP_OR, 0, 0, PTP_CLASS_IPV6 }, /* */ \
{OP_RETA, 0, 0, 0 }, /* */ \
/*L3x*/ {OP_RETK, 0, 0, PTP_CLASS_NONE }, /* */ \
-/*L40*/ {OP_JEQ, 0, 6, ETH_P_8021Q }, /* f goto L50 */ \
+/*L40*/ {OP_JEQ, 0, 9, ETH_P_8021Q }, /* f goto L50 */ \
{OP_LDH, 0, 0, OFF_ETYPE + 4 }, /* */ \
- {OP_JEQ, 0, 9, ETH_P_1588 }, /* f goto L60 */ \
+ {OP_JEQ, 0, 15, ETH_P_1588 }, /* f goto L60 */ \
+ {OP_LDB, 0, 0, ETH_HLEN + VLAN_HLEN }, /* */ \
+ {OP_AND, 0, 0, PTP_GEN_BIT }, /* */ \
+ {OP_JEQ, 0, 12, 0 }, /* f goto L6x */ \
{OP_LDH, 0, 0, ETH_HLEN + VLAN_HLEN }, /* */ \
{OP_AND, 0, 0, PTP_CLASS_VMASK }, /* */ \
{OP_OR, 0, 0, PTP_CLASS_VLAN }, /* */ \
{OP_RETA, 0, 0, 0 }, /* */ \
-/*L50*/ {OP_JEQ, 0, 4, ETH_P_1588 }, /* f goto L61 */ \
+/*L50*/ {OP_JEQ, 0, 7, ETH_P_1588 }, /* f goto L61 */ \
+ {OP_LDB, 0, 0, ETH_HLEN }, /* */ \
+ {OP_AND, 0, 0, PTP_GEN_BIT }, /* */ \
+ {OP_JEQ, 0, 4, 0 }, /* f goto L6x */ \
{OP_LDH, 0, 0, ETH_HLEN }, /* */ \
{OP_AND, 0, 0, PTP_CLASS_VMASK }, /* */ \
{OP_OR, 0, 0, PTP_CLASS_L2 }, /* */ \
unsigned int pwm_period_ns;
int (*init)(struct device *dev);
int (*notify)(struct device *dev, int brightness);
+ void (*notify_after)(struct device *dev, int brightness);
void (*exit)(struct device *dev);
int (*check_fb)(struct device *dev, struct fb_info *info);
};
const char *supply;
struct regulator *consumer;
- /* Internal use */
+ /* private: Internal use */
int ret;
};
#define RIO_PEF_PROCESSOR 0x20000000 /* [I] Processor */
#define RIO_PEF_SWITCH 0x10000000 /* [I] Switch */
#define RIO_PEF_MULTIPORT 0x08000000 /* [VI, 2.1] Multiport */
-#define RIO_PEF_INB_MBOX 0x00f00000 /* [II] Mailboxes */
-#define RIO_PEF_INB_MBOX0 0x00800000 /* [II] Mailbox 0 */
-#define RIO_PEF_INB_MBOX1 0x00400000 /* [II] Mailbox 1 */
-#define RIO_PEF_INB_MBOX2 0x00200000 /* [II] Mailbox 2 */
-#define RIO_PEF_INB_MBOX3 0x00100000 /* [II] Mailbox 3 */
-#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II] Doorbells */
+#define RIO_PEF_INB_MBOX 0x00f00000 /* [II, <= 1.2] Mailboxes */
+#define RIO_PEF_INB_MBOX0 0x00800000 /* [II, <= 1.2] Mailbox 0 */
+#define RIO_PEF_INB_MBOX1 0x00400000 /* [II, <= 1.2] Mailbox 1 */
+#define RIO_PEF_INB_MBOX2 0x00200000 /* [II, <= 1.2] Mailbox 2 */
+#define RIO_PEF_INB_MBOX3 0x00100000 /* [II, <= 1.2] Mailbox 3 */
+#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II, <= 1.2] Doorbells */
#define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */
#define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */
#define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */
#define RIO_SWITCH_RT_LIMIT 0x34 /* [III, 1.3] Switch Route Table Destination ID Limit CAR */
#define RIO_RT_MAX_DESTID 0x0000ffff
-#define RIO_MBOX_CSR 0x40 /* [II] Mailbox CSR */
+#define RIO_MBOX_CSR 0x40 /* [II, <= 1.2] Mailbox CSR */
#define RIO_MBOX0_AVAIL 0x80000000 /* [II] Mbox 0 avail */
#define RIO_MBOX0_FULL 0x40000000 /* [II] Mbox 0 full */
#define RIO_MBOX0_EMPTY 0x20000000 /* [II] Mbox 0 empty */
#define RIO_MBOX3_FAIL 0x00000008 /* [II] Mbox 3 fail */
#define RIO_MBOX3_ERROR 0x00000004 /* [II] Mbox 3 error */
-#define RIO_WRITE_PORT_CSR 0x44 /* [I] Write Port CSR */
-#define RIO_DOORBELL_CSR 0x44 /* [II] Doorbell CSR */
+#define RIO_WRITE_PORT_CSR 0x44 /* [I, <= 1.2] Write Port CSR */
+#define RIO_DOORBELL_CSR 0x44 /* [II, <= 1.2] Doorbell CSR */
#define RIO_DOORBELL_AVAIL 0x80000000 /* [II] Doorbell avail */
#define RIO_DOORBELL_FULL 0x40000000 /* [II] Doorbell full */
#define RIO_DOORBELL_EMPTY 0x20000000 /* [II] Doorbell empty */
extern unsigned long long
task_sched_runtime(struct task_struct *task);
-extern unsigned long long thread_group_sched_runtime(struct task_struct *task);
/* sched_exec is called by processes performing an exec */
#ifdef CONFIG_SMP
extern bool skb_recycle_check(struct sk_buff *skb, int skb_size);
extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src);
+extern int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask);
extern struct sk_buff *skb_clone(struct sk_buff *skb,
gfp_t priority);
extern struct sk_buff *skb_copy(const struct sk_buff *skb,
LINUX_MIB_TCPDEFERACCEPTDROP,
LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */
+ LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */
+ LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */
__LINUX_MIB_MAX
};
extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
gfp_t gfp_mask, nodemask_t *mask);
extern int __isolate_lru_page(struct page *page, int mode, int file);
+extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
+ gfp_t gfp_mask, bool noswap);
+extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
+ gfp_t gfp_mask, bool noswap,
+ struct zone *zone,
+ unsigned long *nr_scanned);
extern unsigned long shrink_all_memory(unsigned long nr_pages);
extern int vm_swappiness;
extern int remove_mapping(struct address_space *mapping, struct page *page);
asmlinkage long sys_sysinfo(struct sysinfo __user *info);
asmlinkage long sys_sysfs(int option,
unsigned long arg1, unsigned long arg2);
-asmlinkage long sys_nfsservctl(int cmd,
- struct nfsctl_arg __user *arg,
- void __user *res);
asmlinkage long sys_syslog(int type, char __user *buf, int len);
asmlinkage long sys_uselib(const char __user *library);
asmlinkage long sys_ni_syscall(void);
u16 plen;
} __attribute__ ((packed));
-/* platform data */
+/**
+ * struct ti_st_plat_data - platform data shared between ST driver and
+ * platform specific board file which adds the ST device.
+ * @nshutdown_gpio: Host's GPIO line to which chip's BT_EN is connected.
+ * @dev_name: The UART/TTY name to which chip is interfaced. (eg: /dev/ttyS1)
+ * @flow_cntrl: Should always be 1, since UART's CTS/RTS is used for PM
+ * purposes.
+ * @baud_rate: The baud rate supported by the Host UART controller, this will
+ * be shared across with the chip via a HCI VS command from User-Space Init
+ * Mgr application.
+ * @suspend:
+ * @resume: legacy PM routines hooked to platform specific board file, so as
+ * to take chip-host interface specific action.
+ * @chip_enable:
+ * @chip_disable: Platform/Interface specific mux mode setting, GPIO
+ * configuring, Host side PM disabling etc.. can be done here.
+ * @chip_asleep:
+ * @chip_awake: Chip specific deep sleep states is communicated to Host
+ * specific board-xx.c to take actions such as cut UART clocks when chip
+ * asleep or run host faster when chip awake etc..
+ *
+ */
struct ti_st_plat_data {
long nshutdown_gpio;
unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */
unsigned long baud_rate;
int (*suspend)(struct platform_device *, pm_message_t);
int (*resume)(struct platform_device *);
+ int (*chip_enable) (struct kim_data_s *);
+ int (*chip_disable) (struct kim_data_s *);
+ int (*chip_asleep) (struct kim_data_s *);
+ int (*chip_awake) (struct kim_data_s *);
};
#endif /* TI_WILINK_ST_H */
extern void tty_throttle(struct tty_struct *tty);
extern void tty_unthrottle(struct tty_struct *tty);
extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
+extern void tty_driver_remove_tty(struct tty_driver *driver,
+ struct tty_struct *tty);
extern void tty_shutdown(struct tty_struct *tty);
extern void tty_free_termios(struct tty_struct *tty);
extern int is_current_pgrp_orphaned(void);
*
* This routine is called synchronously when a particular tty device
* is closed for the last time freeing up the resources.
+ * Note that tty_shutdown() is not called if ops->shutdown is defined.
+ * This means one is responsible to take care of calling ops->remove (e.g.
+ * via tty_driver_remove_tty) and releasing tty->termios.
*
*
* void (*cleanup)(struct tty_struct * tty);
*
* (thresh - thresh/DIRTY_FULL_SCOPE, thresh)
*
- * The 1/16 region above the global dirty limit will be put to maximum pauses:
- *
- * (limit, limit + limit/DIRTY_MAXPAUSE_AREA)
- *
- * The 1/16 region above the max-pause region, dirty exceeded bdi's will be put
- * to loops:
- *
- * (limit + limit/DIRTY_MAXPAUSE_AREA, limit + limit/DIRTY_PASSGOOD_AREA)
- *
* Further beyond, all dirtier tasks will enter a loop waiting (possibly long
* time) for the dirty pages to drop, unless written enough pages.
*
*/
#define DIRTY_SCOPE 8
#define DIRTY_FULL_SCOPE (DIRTY_SCOPE / 2)
-#define DIRTY_MAXPAUSE_AREA 16
-#define DIRTY_PASSGOOD_AREA 8
/*
* 4MB minimal write chunk size
P9_DMSETVTX = 0x00010000,
};
+/* 9p2000.L open flags */
+#define P9_DOTL_RDONLY 00000000
+#define P9_DOTL_WRONLY 00000001
+#define P9_DOTL_RDWR 00000002
+#define P9_DOTL_NOACCESS 00000003
+#define P9_DOTL_CREATE 00000100
+#define P9_DOTL_EXCL 00000200
+#define P9_DOTL_NOCTTY 00000400
+#define P9_DOTL_TRUNC 00001000
+#define P9_DOTL_APPEND 00002000
+#define P9_DOTL_NONBLOCK 00004000
+#define P9_DOTL_DSYNC 00010000
+#define P9_DOTL_FASYNC 00020000
+#define P9_DOTL_DIRECT 00040000
+#define P9_DOTL_LARGEFILE 00100000
+#define P9_DOTL_DIRECTORY 00200000
+#define P9_DOTL_NOFOLLOW 00400000
+#define P9_DOTL_NOATIME 01000000
+#define P9_DOTL_CLOEXEC 02000000
+#define P9_DOTL_SYNC 04000000
+
+/* 9p2000.L at flags */
+#define P9_DOTL_AT_REMOVEDIR 0x200
+
+/* 9p2000.L lock type */
+#define P9_LOCK_TYPE_RDLCK 0
+#define P9_LOCK_TYPE_WRLCK 1
+#define P9_LOCK_TYPE_UNLCK 2
+
/**
* enum p9_qid_t - QID types
* @P9_QTDIR: directory
* by default for perm_addr. In this case, the mask should be set to
* all-zeroes. In this case it is assumed that the device can handle
* the same number of arbitrary MAC addresses.
+ * @registered: protects ->resume and ->suspend sysfs callbacks against
+ * unregister hardware
* @debugfsdir: debugfs directory used for this wiphy, will be renamed
* automatically on wiphy renames
* @dev: (virtual) struct device for this wiphy
* you need use set_wiphy_dev() (see below) */
struct device dev;
+ /* protects ->resume, ->suspend sysfs callbacks against unregister hw */
+ bool registered;
+
/* dir in debugfs: ieee80211/<wiphyname> */
struct dentry *debugfsdir;
#ifndef _NET_FLOW_H
#define _NET_FLOW_H
+#include <linux/socket.h>
#include <linux/in6.h>
#include <linux/atomic.h>
#define fl4_ipsec_spi uli.spi
#define fl4_mh_type uli.mht.type
#define fl4_gre_key uli.gre_key
-};
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
static inline void flowi4_init_output(struct flowi4 *fl4, int oif,
__u32 mark, __u8 tos, __u8 scope,
#define fl6_ipsec_spi uli.spi
#define fl6_mh_type uli.mht.type
#define fl6_gre_key uli.gre_key
-};
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
struct flowidn {
struct flowi_common __fl_common;
union flowi_uli uli;
#define fld_sport uli.ports.sport
#define fld_dport uli.ports.dport
-};
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
struct flowi {
union {
return container_of(fldn, struct flowi, u.dn);
}
+typedef unsigned long flow_compare_t;
+
+static inline size_t flow_key_size(u16 family)
+{
+ switch (family) {
+ case AF_INET:
+ BUILD_BUG_ON(sizeof(struct flowi4) % sizeof(flow_compare_t));
+ return sizeof(struct flowi4) / sizeof(flow_compare_t);
+ case AF_INET6:
+ BUILD_BUG_ON(sizeof(struct flowi6) % sizeof(flow_compare_t));
+ return sizeof(struct flowi6) / sizeof(flow_compare_t);
+ case AF_DECnet:
+ BUILD_BUG_ON(sizeof(struct flowidn) % sizeof(flow_compare_t));
+ return sizeof(struct flowidn) / sizeof(flow_compare_t);
+ }
+ return 0;
+}
+
#define FLOW_DIR_IN 0
#define FLOW_DIR_OUT 1
#define FLOW_DIR_FWD 2
*/
struct listen_sock {
u8 max_qlen_log;
- /* 3 bytes hole, try to use */
+ u8 synflood_warned;
+ /* 2 bytes hole, try to use */
int qlen;
int qlen_young;
int clock_hand;
SCTP_CMD_SEND_MSG, /* Send the whole use message */
SCTP_CMD_SEND_NEXT_ASCONF, /* Send the next ASCONF after ACK */
SCTP_CMD_PURGE_ASCONF_QUEUE, /* Purge all asconf queues.*/
+ SCTP_CMD_SET_ASOC, /* Restore association context */
SCTP_CMD_LAST
} sctp_verb_t;
extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS];
extern struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
struct ip_options *opt);
+#ifdef CONFIG_SYN_COOKIES
extern __u32 cookie_v4_init_sequence(struct sock *sk, struct sk_buff *skb,
__u16 *mss);
+#else
+static inline __u32 cookie_v4_init_sequence(struct sock *sk,
+ struct sk_buff *skb,
+ __u16 *mss)
+{
+ return 0;
+}
+#endif
extern __u32 cookie_init_timestamp(struct request_sock *req);
extern bool cookie_check_timestamp(struct tcp_options_received *opt, bool *);
/* From net/ipv6/syncookies.c */
extern struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb);
+#ifdef CONFIG_SYN_COOKIES
extern __u32 cookie_v6_init_sequence(struct sock *sk, struct sk_buff *skb,
__u16 *mss);
-
+#else
+static inline __u32 cookie_v6_init_sequence(struct sock *sk,
+ struct sk_buff *skb,
+ __u16 *mss)
+{
+ return 0;
+}
+#endif
/* tcp_output.c */
extern void __tcp_push_pending_frames(struct sock *sk, unsigned int cur_mss,
extern void tcp_send_fin(struct sock *sk);
extern void tcp_send_active_reset(struct sock *sk, gfp_t priority);
extern int tcp_send_synack(struct sock *);
+extern int tcp_syn_flood_action(struct sock *sk,
+ const struct sk_buff *skb,
+ const char *proto);
extern void tcp_push_one(struct sock *, unsigned int mss_now);
extern void tcp_send_ack(struct sock *sk);
extern void tcp_send_delayed_ack(struct sock *sk);
struct sk_buff *skb);
extern int datagram_send_ctl(struct net *net,
+ struct sock *sk,
struct msghdr *msg,
struct flowi6 *fl6,
struct ipv6_txoptions *opt,
int (*tpg_check_demo_mode_cache)(struct se_portal_group *);
int (*tpg_check_demo_mode_write_protect)(struct se_portal_group *);
int (*tpg_check_prod_mode_write_protect)(struct se_portal_group *);
+ /*
+ * Optionally used by fabrics to allow demo-mode login, but not
+ * expose any TPG LUNs, and return 'not connected' in standard
+ * inquiry response
+ */
+ int (*tpg_check_demo_mode_login_only)(struct se_portal_group *);
struct se_node_acl *(*tpg_alloc_fabric_acl)(
struct se_portal_group *);
void (*tpg_release_fabric_acl)(struct se_portal_group *,
__array(char, name, 32)
__field(unsigned long, ino)
__field(unsigned long, state)
- __field(unsigned long, age)
+ __field(unsigned long, dirtied_when)
__field(unsigned long, writeback_index)
__field(long, nr_to_write)
__field(unsigned long, wrote)
dev_name(inode->i_mapping->backing_dev_info->dev), 32);
__entry->ino = inode->i_ino;
__entry->state = inode->i_state;
- __entry->age = (jiffies - inode->dirtied_when) *
- 1000 / HZ;
+ __entry->dirtied_when = inode->dirtied_when;
__entry->writeback_index = inode->i_mapping->writeback_index;
__entry->nr_to_write = nr_to_write;
__entry->wrote = nr_to_write - wbc->nr_to_write;
),
- TP_printk("bdi %s: ino=%lu state=%s age=%lu "
+ TP_printk("bdi %s: ino=%lu state=%s dirtied_when=%lu age=%lu "
"index=%lu to_write=%ld wrote=%lu",
__entry->name,
__entry->ino,
show_inode_state(__entry->state),
- __entry->age,
+ __entry->dirtied_when,
+ (jiffies - __entry->dirtied_when) / HZ,
__entry->writeback_index,
__entry->nr_to_write,
__entry->wrote
static int __init loglevel(char *str)
{
- get_option(&str, &console_loglevel);
- return 0;
+ int newlevel;
+
+ /*
+ * Only update loglevel value when a correct setting was passed,
+ * to prevent blind crashes (when loglevel being set to 0) that
+ * are quite hard to debug
+ */
+ if (get_option(&str, &newlevel)) {
+ console_loglevel = newlevel;
+ return 0;
+ }
+
+ return -EINVAL;
}
early_param("loglevel", loglevel);
preempt_enable_no_resched();
schedule();
- /* At this point, we can enable user mode helper functionality */
- usermodehelper_enable();
-
/* Call into cpu_idle with preempt disabled */
preempt_disable();
cpu_idle();
driver_init();
init_irq_proc();
do_ctors();
+ usermodehelper_enable();
do_initcalls();
}
local_irq_restore(flags);
}
-static inline void perf_cgroup_sched_out(struct task_struct *task)
+static inline void perf_cgroup_sched_out(struct task_struct *task,
+ struct task_struct *next)
{
- perf_cgroup_switch(task, PERF_CGROUP_SWOUT);
+ struct perf_cgroup *cgrp1;
+ struct perf_cgroup *cgrp2 = NULL;
+
+ /*
+ * we come here when we know perf_cgroup_events > 0
+ */
+ cgrp1 = perf_cgroup_from_task(task);
+
+ /*
+ * next is NULL when called from perf_event_enable_on_exec()
+ * that will systematically cause a cgroup_switch()
+ */
+ if (next)
+ cgrp2 = perf_cgroup_from_task(next);
+
+ /*
+ * only schedule out current cgroup events if we know
+ * that we are switching to a different cgroup. Otherwise,
+ * do no touch the cgroup events.
+ */
+ if (cgrp1 != cgrp2)
+ perf_cgroup_switch(task, PERF_CGROUP_SWOUT);
}
-static inline void perf_cgroup_sched_in(struct task_struct *task)
+static inline void perf_cgroup_sched_in(struct task_struct *prev,
+ struct task_struct *task)
{
- perf_cgroup_switch(task, PERF_CGROUP_SWIN);
+ struct perf_cgroup *cgrp1;
+ struct perf_cgroup *cgrp2 = NULL;
+
+ /*
+ * we come here when we know perf_cgroup_events > 0
+ */
+ cgrp1 = perf_cgroup_from_task(task);
+
+ /* prev can never be NULL */
+ cgrp2 = perf_cgroup_from_task(prev);
+
+ /*
+ * only need to schedule in cgroup events if we are changing
+ * cgroup during ctxsw. Cgroup events were not scheduled
+ * out of ctxsw out if that was not the case.
+ */
+ if (cgrp1 != cgrp2)
+ perf_cgroup_switch(task, PERF_CGROUP_SWIN);
}
static inline int perf_cgroup_connect(int fd, struct perf_event *event,
{
}
-static inline void perf_cgroup_sched_out(struct task_struct *task)
+static inline void perf_cgroup_sched_out(struct task_struct *task,
+ struct task_struct *next)
{
}
-static inline void perf_cgroup_sched_in(struct task_struct *task)
+static inline void perf_cgroup_sched_in(struct task_struct *prev,
+ struct task_struct *task)
{
}
* cgroup event are system-wide mode only
*/
if (atomic_read(&__get_cpu_var(perf_cgroup_events)))
- perf_cgroup_sched_out(task);
+ perf_cgroup_sched_out(task, next);
}
static void task_ctx_sched_out(struct perf_event_context *ctx)
* accessing the event control register. If a NMI hits, then it will
* keep the event running.
*/
-void __perf_event_task_sched_in(struct task_struct *task)
+void __perf_event_task_sched_in(struct task_struct *prev,
+ struct task_struct *task)
{
struct perf_event_context *ctx;
int ctxn;
* cgroup event are system-wide mode only
*/
if (atomic_read(&__get_cpu_var(perf_cgroup_events)))
- perf_cgroup_sched_in(task);
+ perf_cgroup_sched_in(prev, task);
}
static u64 perf_calculate_period(struct perf_event *event, u64 nsec, u64 count)
* ctxswin cgroup events which are already scheduled
* in.
*/
- perf_cgroup_sched_out(current);
+ perf_cgroup_sched_out(current, NULL);
raw_spin_lock(&ctx->lock);
task_ctx_sched_out(ctx);
}
static void calc_timer_values(struct perf_event *event,
- u64 *running,
- u64 *enabled)
+ u64 *enabled,
+ u64 *running)
{
u64 now, ctx_time;
desc->depth = 1;
if (desc->irq_data.chip->irq_shutdown)
desc->irq_data.chip->irq_shutdown(&desc->irq_data);
- if (desc->irq_data.chip->irq_disable)
+ else if (desc->irq_data.chip->irq_disable)
desc->irq_data.chip->irq_disable(&desc->irq_data);
else
desc->irq_data.chip->irq_mask(&desc->irq_data);
*/
for (hwirq = 0; hwirq < domain->nr_irq; hwirq++) {
d = irq_get_irq_data(irq_domain_to_irq(domain, hwirq));
- if (d || d->domain) {
+ if (!d) {
+ WARN(1, "error: assigning domain to non existant irq_desc");
+ return;
+ }
+ if (d->domain) {
/* things are broken; just report, don't clean up */
WARN(1, "error: irq_desc already assigned to a domain");
return;
if (!thread_fn)
return -EINVAL;
handler = irq_default_primary_handler;
- irqflags |= IRQF_ONESHOT;
}
action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
do {
times->utime = cputime_add(times->utime, t->utime);
times->stime = cputime_add(times->stime, t->stime);
- times->sum_exec_runtime += t->se.sum_exec_runtime;
+ times->sum_exec_runtime += task_sched_runtime(t);
} while_each_thread(tsk, t);
out:
rcu_read_unlock();
cpu->cpu = cputime.utime;
break;
case CPUCLOCK_SCHED:
- cpu->sched = thread_group_sched_runtime(p);
+ thread_group_cputime(p, &cputime);
+ cpu->sched = cputime.sum_exec_runtime;
break;
}
return 0;
struct console *con;
for_each_console(con) {
- if (con->flags & CON_BOOT) {
+ if (!keep_bootcon && con->flags & CON_BOOT) {
printk(KERN_INFO "turn off boot console %s%d\n",
con->name, con->index);
unregister_console(con);
break;
si = child->last_siginfo;
- if (unlikely(!si || si->si_code >> 8 != PTRACE_EVENT_STOP))
- break;
-
- child->jobctl |= JOBCTL_LISTENING;
-
- /*
- * If NOTIFY is set, it means event happened between start
- * of this trap and now. Trigger re-trap immediately.
- */
- if (child->jobctl & JOBCTL_TRAP_NOTIFY)
- signal_wake_up(child, true);
-
+ if (likely(si && (si->si_code >> 8) == PTRACE_EVENT_STOP)) {
+ child->jobctl |= JOBCTL_LISTENING;
+ /*
+ * If NOTIFY is set, it means event happened between
+ * start of this trap and now. Trigger re-trap.
+ */
+ if (child->jobctl & JOBCTL_TRAP_NOTIFY)
+ signal_wake_up(child, true);
+ ret = 0;
+ }
unlock_task_sighand(child, &flags);
- ret = 0;
break;
case PTRACE_DETACH: /* detach a process that was attached. */
else
tmp.end = root->end;
+ if (tmp.end < tmp.start)
+ goto next;
+
resource_clip(&tmp, constraint->min, constraint->max);
arch_remove_reservations(&tmp);
return 0;
}
}
- if (!this)
+
+next: if (!this || this->end == root->end)
break;
+
if (this != old)
tmp.start = this->end + 1;
this = this->sibling;
#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
local_irq_disable();
#endif /* __ARCH_WANT_INTERRUPTS_ON_CTXSW */
- perf_event_task_sched_in(current);
+ perf_event_task_sched_in(prev, current);
#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
local_irq_enable();
#endif /* __ARCH_WANT_INTERRUPTS_ON_CTXSW */
return ns;
}
-/*
- * Return sum_exec_runtime for the thread group.
- * In case the task is currently running, return the sum plus current's
- * pending runtime that have not been accounted yet.
- *
- * Note that the thread group might have other running tasks as well,
- * so the return value not includes other pending runtime that other
- * running tasks might have.
- */
-unsigned long long thread_group_sched_runtime(struct task_struct *p)
-{
- struct task_cputime totals;
- unsigned long flags;
- struct rq *rq;
- u64 ns;
-
- rq = task_rq_lock(p, &flags);
- thread_group_cputime(p, &totals);
- ns = totals.sum_exec_runtime + do_task_delta_exec(p, rq);
- task_rq_unlock(rq, p, &flags);
-
- return ns;
-}
-
/*
* Account user cpu time to a process.
* @p: the process that the cpu time gets accounted to
}
/*
- * schedule() is the main scheduler function.
+ * __schedule() is the main scheduler function.
*/
-asmlinkage void __sched schedule(void)
+static void __sched __schedule(void)
{
struct task_struct *prev, *next;
unsigned long *switch_count;
if (to_wakeup)
try_to_wake_up_local(to_wakeup);
}
-
- /*
- * If we are going to sleep and we have plugged IO
- * queued, make sure to submit it to avoid deadlocks.
- */
- if (blk_needs_flush_plug(prev)) {
- raw_spin_unlock(&rq->lock);
- blk_schedule_flush_plug(prev);
- raw_spin_lock(&rq->lock);
- }
}
switch_count = &prev->nvcsw;
}
if (need_resched())
goto need_resched;
}
+
+static inline void sched_submit_work(struct task_struct *tsk)
+{
+ if (!tsk->state)
+ return;
+ /*
+ * If we are going to sleep and we have plugged IO queued,
+ * make sure to submit it to avoid deadlocks.
+ */
+ if (blk_needs_flush_plug(tsk))
+ blk_schedule_flush_plug(tsk);
+}
+
+asmlinkage void __sched schedule(void)
+{
+ struct task_struct *tsk = current;
+
+ sched_submit_work(tsk);
+ __schedule();
+}
EXPORT_SYMBOL(schedule);
#ifdef CONFIG_MUTEX_SPIN_ON_OWNER
do {
add_preempt_count_notrace(PREEMPT_ACTIVE);
- schedule();
+ __schedule();
sub_preempt_count_notrace(PREEMPT_ACTIVE);
/*
do {
add_preempt_count(PREEMPT_ACTIVE);
local_irq_enable();
- schedule();
+ __schedule();
local_irq_disable();
sub_preempt_count(PREEMPT_ACTIVE);
static void __cond_resched(void)
{
add_preempt_count(PREEMPT_ACTIVE);
- schedule();
+ __schedule();
sub_preempt_count(PREEMPT_ACTIVE);
}
struct sched_domain *sd = *per_cpu_ptr(sdd->sd, j);
if (sd && (sd->flags & SD_OVERLAP))
free_sched_groups(sd->groups, 0);
+ kfree(*per_cpu_ptr(sdd->sd, j));
kfree(*per_cpu_ptr(sdd->sg, j));
kfree(*per_cpu_ptr(sdd->sgp, j));
}
*/
if (curr && unlikely(rt_task(curr)) &&
(curr->rt.nr_cpus_allowed < 2 ||
- curr->prio < p->prio) &&
+ curr->prio <= p->prio) &&
(p->rt.nr_cpus_allowed > 1)) {
int target = find_lowest_rq(p);
p->rt.nr_cpus_allowed > 1 &&
rt_task(rq->curr) &&
(rq->curr->rt.nr_cpus_allowed < 2 ||
- rq->curr->prio < p->prio))
+ rq->curr->prio <= p->prio))
push_rt_tasks(rq);
}
#include <linux/fs_struct.h>
#include <linux/gfp.h>
#include <linux/syscore_ops.h>
+#include <linux/version.h>
+#include <linux/ctype.h>
#include <linux/compat.h>
#include <linux/syscalls.h>
#include <linux/user_namespace.h>
#include <linux/kmsg_dump.h>
+/* Move somewhere else to avoid recompiling? */
+#include <generated/utsrelease.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#define override_architecture(name) 0
#endif
+/*
+ * Work around broken programs that cannot handle "Linux 3.0".
+ * Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40
+ */
+static int override_release(char __user *release, int len)
+{
+ int ret = 0;
+ char buf[len];
+
+ if (current->personality & UNAME26) {
+ char *rest = UTS_RELEASE;
+ int ndots = 0;
+ unsigned v;
+
+ while (*rest) {
+ if (*rest == '.' && ++ndots >= 3)
+ break;
+ if (!isdigit(*rest) && *rest != '.')
+ break;
+ rest++;
+ }
+ v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40;
+ snprintf(buf, len, "2.6.%u%s", v, rest);
+ ret = copy_to_user(release, buf, len);
+ }
+ return ret;
+}
+
SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
{
int errno = 0;
errno = -EFAULT;
up_read(&uts_sem);
+ if (!errno && override_release(name->release, sizeof(name->release)))
+ errno = -EFAULT;
if (!errno && override_architecture(name))
errno = -EFAULT;
return errno;
error = -EFAULT;
up_read(&uts_sem);
+ if (!error && override_release(name->release, sizeof(name->release)))
+ error = -EFAULT;
if (!error && override_architecture(name))
error = -EFAULT;
return error;
if (!error && override_architecture(name))
error = -EFAULT;
+ if (!error && override_release(name->release, sizeof(name->release)))
+ error = -EFAULT;
return error ? -EFAULT : 0;
}
#endif
return -ENOSYS;
}
-cond_syscall(sys_nfsservctl);
cond_syscall(sys_quotactl);
cond_syscall(sys32_quotactl);
cond_syscall(sys_acct);
#include <linux/stat.h>
#include <linux/sysctl.h>
-#include "../fs/xfs/linux-2.6/xfs_sysctl.h"
+#include "../fs/xfs/xfs_sysctl.h"
#include <linux/sunrpc/debug.h>
#include <linux/string.h>
#include <net/ip_vs.h>
#include <linux/stat.h>
#include <linux/sysctl.h>
-#include "../fs/xfs/linux-2.6/xfs_sysctl.h"
+#include "../fs/xfs/xfs_sysctl.h"
#include <linux/sunrpc/debug.h>
#include <linux/string.h>
#include <net/ip_vs.h>
.cmd = TASKSTATS_CMD_GET,
.doit = taskstats_user_cmd,
.policy = taskstats_cmd_get_policy,
+ .flags = GENL_ADMIN_PERM,
};
static struct genl_ops cgroupstats_ops = {
static void alarm_timer_get(struct k_itimer *timr,
struct itimerspec *cur_setting)
{
+ memset(cur_setting, 0, sizeof(struct itimerspec));
+
cur_setting->it_interval =
ktime_to_timespec(timr->it.alarmtimer.period);
cur_setting->it_value =
if (!rtcdev)
return -ENOTSUPP;
- /* Save old values */
- old_setting->it_interval =
- ktime_to_timespec(timr->it.alarmtimer.period);
- old_setting->it_value =
- ktime_to_timespec(timr->it.alarmtimer.node.expires);
+ /*
+ * XXX HACK! Currently we can DOS a system if the interval
+ * period on alarmtimers is too small. Cap the interval here
+ * to 100us and solve this properly in a future patch! -jstultz
+ */
+ if ((new_setting->it_interval.tv_sec == 0) &&
+ (new_setting->it_interval.tv_nsec < 100000))
+ new_setting->it_interval.tv_nsec = 100000;
+
+ if (old_setting)
+ alarm_timer_get(timr, old_setting);
/* If the timer was already set, cancel it */
alarm_cancel(&timr->it.alarmtimer);
#define KB 1024
#define MB (1024*KB)
+#define KB_MASK (~(KB-1))
/*
* fill in extended accounting fields
*/
stats->hiwater_vm = get_mm_hiwater_vm(mm) * PAGE_SIZE / KB;
mmput(mm);
}
- stats->read_char = p->ioac.rchar;
- stats->write_char = p->ioac.wchar;
- stats->read_syscalls = p->ioac.syscr;
- stats->write_syscalls = p->ioac.syscw;
+ stats->read_char = p->ioac.rchar & KB_MASK;
+ stats->write_char = p->ioac.wchar & KB_MASK;
+ stats->read_syscalls = p->ioac.syscr & KB_MASK;
+ stats->write_syscalls = p->ioac.syscw & KB_MASK;
#ifdef CONFIG_TASK_IO_ACCOUNTING
- stats->read_bytes = p->ioac.read_bytes;
- stats->write_bytes = p->ioac.write_bytes;
- stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes;
+ stats->read_bytes = p->ioac.read_bytes & KB_MASK;
+ stats->write_bytes = p->ioac.write_bytes & KB_MASK;
+ stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes & KB_MASK;
#else
stats->read_bytes = 0;
stats->write_bytes = 0;
for_each_cwq_cpu(cpu, wq) {
struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+ bool drained;
- if (!cwq->nr_active && list_empty(&cwq->delayed_works))
+ spin_lock_irq(&cwq->gcwq->lock);
+ drained = !cwq->nr_active && list_empty(&cwq->delayed_works);
+ spin_unlock_irq(&cwq->gcwq->lock);
+
+ if (drained)
continue;
if (++flush_cnt == 10 ||
idr.o int_sqrt.o extable.o prio_tree.o \
sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \
proportions.o prio_heap.o ratelimit.o show_mem.o \
- is_single_threaded.o plist.o decompress.o find_next_bit.o
+ is_single_threaded.o plist.o decompress.o
lib-$(CONFIG_MMU) += ioremap.o
lib-$(CONFIG_SMP) += cpumask.o
obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
string_helpers.o gcd.o lcm.o list_sort.o uuid.o flex_array.o \
- bsearch.o find_last_bit.o
+ bsearch.o find_last_bit.o find_next_bit.o
obj-y += kstrtox.o
obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/bitops.h>
+#include <linux/cryptohash.h>
#include <asm/unaligned.h>
/*
* next filter in the chain. Apply the BCJ filter on the new data
* in the output buffer. If everything cannot be filtered, copy it
* to temp and rewind the output buffer position accordingly.
+ *
+ * This needs to be always run when temp.size == 0 to handle a special
+ * case where the output buffer is full and the next filter has no
+ * more output coming but hasn't returned XZ_STREAM_END yet.
*/
- if (s->temp.size < b->out_size - b->out_pos) {
+ if (s->temp.size < b->out_size - b->out_pos || s->temp.size == 0) {
out_start = b->out_pos;
memcpy(b->out + b->out_pos, s->temp.buf, s->temp.size);
b->out_pos += s->temp.size;
s->temp.size = b->out_pos - out_start;
b->out_pos -= s->temp.size;
memcpy(s->temp.buf, b->out + b->out_pos, s->temp.size);
+
+ /*
+ * If there wasn't enough input to the next filter to fill
+ * the output buffer with unfiltered data, there's no point
+ * to try decoding more data to temp.
+ */
+ if (b->out_pos + s->temp.size < b->out_size)
+ return XZ_OK;
}
/*
- * If we have unfiltered data in temp, try to fill by decoding more
- * data from the next filter. Apply the BCJ filter on temp. Then we
- * hopefully can fill the actual output buffer by copying filtered
- * data from temp. A mix of filtered and unfiltered data may be left
- * in temp; it will be taken care on the next call to this function.
+ * We have unfiltered data in temp. If the output buffer isn't full
+ * yet, try to fill the temp buffer by decoding more data from the
+ * next filter. Apply the BCJ filter on temp. Then we hopefully can
+ * fill the actual output buffer by copying filtered data from temp.
+ * A mix of filtered and unfiltered data may be left in temp; it will
+ * be taken care on the next call to this function.
*/
- if (s->temp.size > 0) {
+ if (b->out_pos < b->out_size) {
/* Make b->out{,_pos,_size} temporarily point to s->temp. */
s->out = b->out;
s->out_pos = b->out_pos;
return max(5UL * 60 * HZ, interval);
}
+/*
+ * Clear pending bit and wakeup anybody waiting for flusher thread creation or
+ * shutdown
+ */
+static void bdi_clear_pending(struct backing_dev_info *bdi)
+{
+ clear_bit(BDI_pending, &bdi->state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&bdi->state, BDI_pending);
+}
+
static int bdi_forker_thread(void *ptr)
{
struct bdi_writeback *me = ptr;
}
spin_lock_bh(&bdi_lock);
+ /*
+ * In the following loop we are going to check whether we have
+ * some work to do without any synchronization with tasks
+ * waking us up to do work for them. So we have to set task
+ * state already here so that we don't miss wakeups coming
+ * after we verify some condition.
+ */
set_current_state(TASK_INTERRUPTIBLE);
list_for_each_entry(bdi, &bdi_list, bdi_list) {
spin_unlock_bh(&bdi->wb_lock);
wake_up_process(task);
}
+ bdi_clear_pending(bdi);
break;
case KILL_THREAD:
__set_current_state(TASK_RUNNING);
kthread_stop(task);
+ bdi_clear_pending(bdi);
break;
case NO_ACTION:
else
schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
try_to_freeze();
- /* Back to the main loop */
- continue;
+ break;
}
-
- /*
- * Clear pending bit and wakeup anybody waiting to tear us down.
- */
- clear_bit(BDI_pending, &bdi->state);
- smp_mb__after_clear_bit();
- wake_up_bit(&bdi->state, BDI_pending);
}
return 0;
{
unsigned int i;
unsigned int ret;
- unsigned int nr_found;
+ unsigned int nr_found, nr_skip;
rcu_read_lock();
restart:
nr_found = radix_tree_gang_lookup_slot(&mapping->page_tree,
(void ***)pages, NULL, start, nr_pages);
ret = 0;
+ nr_skip = 0;
for (i = 0; i < nr_found; i++) {
struct page *page;
repeat:
* here as an exceptional entry: so skip over it -
* we only reach this from invalidate_mapping_pages().
*/
+ nr_skip++;
continue;
}
* If all entries were removed before we could secure them,
* try again, because callers stop trying once 0 is returned.
*/
- if (unlikely(!ret && nr_found))
+ if (unlikely(!ret && nr_found > nr_skip))
goto restart;
rcu_read_unlock();
return ret;
static void mem_cgroup_threshold(struct mem_cgroup *mem);
static void mem_cgroup_oom_notify(struct mem_cgroup *mem);
-enum {
- SCAN_BY_LIMIT,
- SCAN_BY_SYSTEM,
- NR_SCAN_CONTEXT,
- SCAN_BY_SHRINK, /* not recorded now */
-};
-
-enum {
- SCAN,
- SCAN_ANON,
- SCAN_FILE,
- ROTATE,
- ROTATE_ANON,
- ROTATE_FILE,
- FREED,
- FREED_ANON,
- FREED_FILE,
- ELAPSED,
- NR_SCANSTATS,
-};
-
-struct scanstat {
- spinlock_t lock;
- unsigned long stats[NR_SCAN_CONTEXT][NR_SCANSTATS];
- unsigned long rootstats[NR_SCAN_CONTEXT][NR_SCANSTATS];
-};
-
-const char *scanstat_string[NR_SCANSTATS] = {
- "scanned_pages",
- "scanned_anon_pages",
- "scanned_file_pages",
- "rotated_pages",
- "rotated_anon_pages",
- "rotated_file_pages",
- "freed_pages",
- "freed_anon_pages",
- "freed_file_pages",
- "elapsed_ns",
-};
-#define SCANSTAT_WORD_LIMIT "_by_limit"
-#define SCANSTAT_WORD_SYSTEM "_by_system"
-#define SCANSTAT_WORD_HIERARCHY "_under_hierarchy"
-
-
/*
* The memory controller data structure. The memory controller controls both
* page cache and RSS per cgroup. We would eventually like to provide
/* For oom notifier event fd */
struct list_head oom_notify;
- /* For recording LRU-scan statistics */
- struct scanstat scanstat;
+
/*
* Should we move charges of a task when a task is moved into this
* mem_cgroup ? And what type of charges should we move ?
}
#endif
-static void __mem_cgroup_record_scanstat(unsigned long *stats,
- struct memcg_scanrecord *rec)
-{
-
- stats[SCAN] += rec->nr_scanned[0] + rec->nr_scanned[1];
- stats[SCAN_ANON] += rec->nr_scanned[0];
- stats[SCAN_FILE] += rec->nr_scanned[1];
-
- stats[ROTATE] += rec->nr_rotated[0] + rec->nr_rotated[1];
- stats[ROTATE_ANON] += rec->nr_rotated[0];
- stats[ROTATE_FILE] += rec->nr_rotated[1];
-
- stats[FREED] += rec->nr_freed[0] + rec->nr_freed[1];
- stats[FREED_ANON] += rec->nr_freed[0];
- stats[FREED_FILE] += rec->nr_freed[1];
-
- stats[ELAPSED] += rec->elapsed;
-}
-
-static void mem_cgroup_record_scanstat(struct memcg_scanrecord *rec)
-{
- struct mem_cgroup *mem;
- int context = rec->context;
-
- if (context >= NR_SCAN_CONTEXT)
- return;
-
- mem = rec->mem;
- spin_lock(&mem->scanstat.lock);
- __mem_cgroup_record_scanstat(mem->scanstat.stats[context], rec);
- spin_unlock(&mem->scanstat.lock);
-
- mem = rec->root;
- spin_lock(&mem->scanstat.lock);
- __mem_cgroup_record_scanstat(mem->scanstat.rootstats[context], rec);
- spin_unlock(&mem->scanstat.lock);
-}
-
/*
* Scan the hierarchy if needed to reclaim memory. We remember the last child
* we reclaimed from, so that we don't end up penalizing one child extensively
bool noswap = reclaim_options & MEM_CGROUP_RECLAIM_NOSWAP;
bool shrink = reclaim_options & MEM_CGROUP_RECLAIM_SHRINK;
bool check_soft = reclaim_options & MEM_CGROUP_RECLAIM_SOFT;
- struct memcg_scanrecord rec;
unsigned long excess;
- unsigned long scanned;
+ unsigned long nr_scanned;
excess = res_counter_soft_limit_excess(&root_mem->res) >> PAGE_SHIFT;
if (!check_soft && !shrink && root_mem->memsw_is_minimum)
noswap = true;
- if (shrink)
- rec.context = SCAN_BY_SHRINK;
- else if (check_soft)
- rec.context = SCAN_BY_SYSTEM;
- else
- rec.context = SCAN_BY_LIMIT;
-
- rec.root = root_mem;
-
while (1) {
victim = mem_cgroup_select_victim(root_mem);
if (victim == root_mem) {
css_put(&victim->css);
continue;
}
- rec.mem = victim;
- rec.nr_scanned[0] = 0;
- rec.nr_scanned[1] = 0;
- rec.nr_rotated[0] = 0;
- rec.nr_rotated[1] = 0;
- rec.nr_freed[0] = 0;
- rec.nr_freed[1] = 0;
- rec.elapsed = 0;
/* we use swappiness of local cgroup */
if (check_soft) {
ret = mem_cgroup_shrink_node_zone(victim, gfp_mask,
- noswap, zone, &rec, &scanned);
- *total_scanned += scanned;
+ noswap, zone, &nr_scanned);
+ *total_scanned += nr_scanned;
} else
ret = try_to_free_mem_cgroup_pages(victim, gfp_mask,
- noswap, &rec);
- mem_cgroup_record_scanstat(&rec);
+ noswap);
css_put(&victim->css);
/*
* At shrinking usage, we can't check we should stop here or
*/
static bool mem_cgroup_oom_lock(struct mem_cgroup *mem)
{
- int lock_count = -1;
struct mem_cgroup *iter, *failed = NULL;
bool cond = true;
for_each_mem_cgroup_tree_cond(iter, mem, cond) {
- bool locked = iter->oom_lock;
-
- iter->oom_lock = true;
- if (lock_count == -1)
- lock_count = iter->oom_lock;
- else if (lock_count != locked) {
+ if (iter->oom_lock) {
/*
* this subtree of our hierarchy is already locked
* so we cannot give a lock.
*/
- lock_count = 0;
failed = iter;
cond = false;
- }
+ } else
+ iter->oom_lock = true;
}
if (!failed)
- goto done;
+ return true;
/*
* OK, we failed to lock the whole subtree so we have to clean up
}
iter->oom_lock = false;
}
-done:
- return lock_count;
+ return false;
}
/*
/* Notify other cpus that system-wide "drain" is running */
get_online_cpus();
- /*
- * Get a hint for avoiding draining charges on the current cpu,
- * which must be exhausted by our charging. It is not required that
- * this be a precise check, so we use raw_smp_processor_id() instead of
- * getcpu()/putcpu().
- */
- curcpu = raw_smp_processor_id();
+ curcpu = get_cpu();
for_each_online_cpu(cpu) {
struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu);
struct mem_cgroup *mem;
schedule_work_on(cpu, &stock->work);
}
}
+ put_cpu();
if (!sync)
goto out;
/* try to free all pages in this cgroup */
shrink = 1;
while (nr_retries && mem->res.usage > 0) {
- struct memcg_scanrecord rec;
int progress;
if (signal_pending(current)) {
ret = -EINTR;
goto out;
}
- rec.context = SCAN_BY_SHRINK;
- rec.mem = mem;
- rec.root = mem;
progress = try_to_free_mem_cgroup_pages(mem, GFP_KERNEL,
- false, &rec);
+ false);
if (!progress) {
nr_retries--;
/* maybe some writeback is necessary */
}
#endif /* CONFIG_NUMA */
-static int mem_cgroup_vmscan_stat_read(struct cgroup *cgrp,
- struct cftype *cft,
- struct cgroup_map_cb *cb)
-{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
- char string[64];
- int i;
-
- for (i = 0; i < NR_SCANSTATS; i++) {
- strcpy(string, scanstat_string[i]);
- strcat(string, SCANSTAT_WORD_LIMIT);
- cb->fill(cb, string, mem->scanstat.stats[SCAN_BY_LIMIT][i]);
- }
-
- for (i = 0; i < NR_SCANSTATS; i++) {
- strcpy(string, scanstat_string[i]);
- strcat(string, SCANSTAT_WORD_SYSTEM);
- cb->fill(cb, string, mem->scanstat.stats[SCAN_BY_SYSTEM][i]);
- }
-
- for (i = 0; i < NR_SCANSTATS; i++) {
- strcpy(string, scanstat_string[i]);
- strcat(string, SCANSTAT_WORD_LIMIT);
- strcat(string, SCANSTAT_WORD_HIERARCHY);
- cb->fill(cb, string, mem->scanstat.rootstats[SCAN_BY_LIMIT][i]);
- }
- for (i = 0; i < NR_SCANSTATS; i++) {
- strcpy(string, scanstat_string[i]);
- strcat(string, SCANSTAT_WORD_SYSTEM);
- strcat(string, SCANSTAT_WORD_HIERARCHY);
- cb->fill(cb, string, mem->scanstat.rootstats[SCAN_BY_SYSTEM][i]);
- }
- return 0;
-}
-
-static int mem_cgroup_reset_vmscan_stat(struct cgroup *cgrp,
- unsigned int event)
-{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
-
- spin_lock(&mem->scanstat.lock);
- memset(&mem->scanstat.stats, 0, sizeof(mem->scanstat.stats));
- memset(&mem->scanstat.rootstats, 0, sizeof(mem->scanstat.rootstats));
- spin_unlock(&mem->scanstat.lock);
- return 0;
-}
-
-
static struct cftype mem_cgroup_files[] = {
{
.name = "usage_in_bytes",
.mode = S_IRUGO,
},
#endif
- {
- .name = "vmscan_stat",
- .read_map = mem_cgroup_vmscan_stat_read,
- .trigger = mem_cgroup_reset_vmscan_stat,
- },
};
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
atomic_set(&mem->refcnt, 1);
mem->move_charge_at_immigrate = 0;
mutex_init(&mem->thresholds_lock);
- spin_lock_init(&mem->scanstat.lock);
return &mem->css;
free_out:
__mem_cgroup_free(mem);
struct vm_area_struct *prev;
struct vm_area_struct *vma;
int err = 0;
- pgoff_t pgoff;
unsigned long vmstart;
unsigned long vmend;
vmstart = max(start, vma->vm_start);
vmend = min(end, vma->vm_end);
- pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT);
prev = vma_merge(mm, prev, vmstart, vmend, vma->vm_flags,
- vma->anon_vma, vma->vm_file, pgoff, new_pol);
+ vma->anon_vma, vma->vm_file, vma->vm_pgoff,
+ new_pol);
if (prev) {
vma = prev;
next = vma->vm_next;
err = sys_get_mempolicy(policy, nm, nr_bits+1, addr, flags);
if (!err && nmask) {
- err = copy_from_user(bm, nm, alloc_size);
+ unsigned long copy_size;
+ copy_size = min_t(unsigned long, sizeof(bm), alloc_size);
+ err = copy_from_user(bm, nm, copy_size);
/* ensure entire bitmap is zeroed */
err |= clear_user(nmask, ALIGN(maxnode-1, 8) / 8);
err |= compat_put_bitmap(nmask, bm, nr_bits);
* 200ms is typically more than enough to curb heavy dirtiers;
* (b) the pause time limit makes the dirtiers more responsive.
*/
- if (nr_dirty < dirty_thresh +
- dirty_thresh / DIRTY_MAXPAUSE_AREA &&
+ if (nr_dirty < dirty_thresh &&
+ bdi_dirty < (task_bdi_thresh + bdi_thresh) / 2 &&
time_after(jiffies, start_time + MAX_PAUSE))
break;
- /*
- * pass-good area. When some bdi gets blocked (eg. NFS server
- * not responding), or write bandwidth dropped dramatically due
- * to concurrent reads, or dirty threshold suddenly dropped and
- * the dirty pages cannot be brought down anytime soon (eg. on
- * slow USB stick), at least let go of the good bdi's.
- */
- if (nr_dirty < dirty_thresh +
- dirty_thresh / DIRTY_PASSGOOD_AREA &&
- bdi_dirty < bdi_thresh)
- break;
/*
* Increase the delay for each loop, up to our previous
*/
if (unlikely(!prior)) {
remove_full(s, page);
- add_partial(n, page, 0);
+ add_partial(n, page, 1);
stat(s, FREE_ADD_PARTIAL);
}
}
return NULL;
}
+ /*
+ * If the allocated address space is passed to a hypercall
+ * before being used then we cannot rely on a page fault to
+ * trigger an update of the page tables. So sync all the page
+ * tables here.
+ */
+ vmalloc_sync_all();
+
return area;
}
EXPORT_SYMBOL_GPL(alloc_vm_area);
/* Which cgroup do we reclaim from */
struct mem_cgroup *mem_cgroup;
- struct memcg_scanrecord *memcg_record;
/*
* Nodemask of nodes allowed by the caller. If NULL, all nodes
int file = is_file_lru(lru);
int numpages = hpage_nr_pages(page);
reclaim_stat->recent_rotated[file] += numpages;
- if (!scanning_global_lru(sc))
- sc->memcg_record->nr_rotated[file] += numpages;
}
if (!pagevec_add(&pvec, page)) {
spin_unlock_irq(&zone->lru_lock);
reclaim_stat->recent_scanned[0] += *nr_anon;
reclaim_stat->recent_scanned[1] += *nr_file;
- if (!scanning_global_lru(sc)) {
- sc->memcg_record->nr_scanned[0] += *nr_anon;
- sc->memcg_record->nr_scanned[1] += *nr_file;
- }
}
/*
nr_reclaimed += shrink_page_list(&page_list, zone, sc);
}
- if (!scanning_global_lru(sc))
- sc->memcg_record->nr_freed[file] += nr_reclaimed;
-
local_irq_disable();
if (current_is_kswapd())
__count_vm_events(KSWAPD_STEAL, nr_reclaimed);
}
reclaim_stat->recent_scanned[file] += nr_taken;
- if (!scanning_global_lru(sc))
- sc->memcg_record->nr_scanned[file] += nr_taken;
__count_zone_vm_events(PGREFILL, zone, pgscanned);
if (file)
* get_scan_ratio.
*/
reclaim_stat->recent_rotated[file] += nr_rotated;
- if (!scanning_global_lru(sc))
- sc->memcg_record->nr_rotated[file] += nr_rotated;
move_active_pages_to_lru(zone, &l_active,
LRU_ACTIVE + file * LRU_FILE);
u64 fraction[2], denominator;
enum lru_list l;
int noswap = 0;
- int force_scan = 0;
+ bool force_scan = false;
unsigned long nr_force_scan[2];
-
- anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) +
- zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON);
- file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) +
- zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE);
-
- if (((anon + file) >> priority) < SWAP_CLUSTER_MAX) {
- /* kswapd does zone balancing and need to scan this zone */
- if (scanning_global_lru(sc) && current_is_kswapd())
- force_scan = 1;
- /* memcg may have small limit and need to avoid priority drop */
- if (!scanning_global_lru(sc))
- force_scan = 1;
- }
+ /* kswapd does zone balancing and needs to scan this zone */
+ if (scanning_global_lru(sc) && current_is_kswapd())
+ force_scan = true;
+ /* memcg may have small limit and need to avoid priority drop */
+ if (!scanning_global_lru(sc))
+ force_scan = true;
/* If we have no swap space, do not bother scanning anon pages. */
if (!sc->may_swap || (nr_swap_pages <= 0)) {
goto out;
}
+ anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) +
+ zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON);
+ file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) +
+ zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE);
+
if (scanning_global_lru(sc)) {
free = zone_page_state(zone, NR_FREE_PAGES);
/* If we have very few page cache pages,
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
- gfp_t gfp_mask, bool noswap,
- struct zone *zone,
- struct memcg_scanrecord *rec,
- unsigned long *scanned)
+ gfp_t gfp_mask, bool noswap,
+ struct zone *zone,
+ unsigned long *nr_scanned)
{
struct scan_control sc = {
.nr_scanned = 0,
.may_swap = !noswap,
.order = 0,
.mem_cgroup = mem,
- .memcg_record = rec,
};
- unsigned long start, end;
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
sc.may_writepage,
sc.gfp_mask);
- start = sched_clock();
/*
* NOTE: Although we can get the priority field, using it
* here is not a good idea, since it limits the pages we can scan.
* the priority and make it zero.
*/
shrink_zone(0, zone, &sc);
- end = sched_clock();
-
- if (rec)
- rec->elapsed += end - start;
- *scanned = sc.nr_scanned;
trace_mm_vmscan_memcg_softlimit_reclaim_end(sc.nr_reclaimed);
+ *nr_scanned = sc.nr_scanned;
return sc.nr_reclaimed;
}
unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
gfp_t gfp_mask,
- bool noswap,
- struct memcg_scanrecord *rec)
+ bool noswap)
{
struct zonelist *zonelist;
unsigned long nr_reclaimed;
- unsigned long start, end;
int nid;
struct scan_control sc = {
.may_writepage = !laptop_mode,
.nr_to_reclaim = SWAP_CLUSTER_MAX,
.order = 0,
.mem_cgroup = mem_cont,
- .memcg_record = rec,
.nodemask = NULL, /* we don't care the placement */
.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK),
.gfp_mask = sc.gfp_mask,
};
- start = sched_clock();
/*
* Unlike direct reclaim via alloc_pages(), memcg's reclaim doesn't
* take care of from where we get pages. So the node where we start the
sc.gfp_mask);
nr_reclaimed = do_try_to_free_pages(zonelist, &sc, &shrink);
- end = sched_clock();
- if (rec)
- rec->elapsed += end - start;
trace_mm_vmscan_memcg_reclaim_end(nr_reclaimed);
high_wmark_pages(zone), 0, 0)) {
end_zone = i;
break;
+ } else {
+ /* If balanced, clear the congested flag */
+ zone_clear_flag(zone, ZONE_CONGESTED);
}
}
if (i < 0)
}
#endif
-#if defined(CONFIG_PROC_FS) || defined(CONFIG_SYSFS)
+#if defined(CONFIG_PROC_FS) || defined(CONFIG_SYSFS) || defined(CONFIG_NUMA)
#ifdef CONFIG_ZONE_DMA
#define TEXT_FOR_DMA(xx) xx "_dma",
#else
#endif /* CONFIG_VM_EVENTS_COUNTERS */
};
-#endif /* CONFIG_PROC_FS || CONFIG_SYSFS */
+#endif /* CONFIG_PROC_FS || CONFIG_SYSFS || CONFIG_NUMA */
#ifdef CONFIG_PROC_FS
if (unlikely(!skb))
goto err_free;
+ skb_reset_network_header(skb);
+ skb_reset_transport_header(skb);
return skb;
err_free:
{
int in, out, inp, outp;
struct virtio_chan *chan = client->trans;
- char *rdata = (char *)req->rc+sizeof(struct p9_fcall);
unsigned long flags;
size_t pdata_off = 0;
struct trans_rpage_info *rpinfo = NULL;
* Arrange in such a way that server places header in the
* alloced memory and payload onto the user buffer.
*/
- inp = pack_sg_list(chan->sg, out, VIRTQUEUE_NUM, rdata, 11);
+ inp = pack_sg_list(chan->sg, out,
+ VIRTQUEUE_NUM, req->rc->sdata, 11);
/*
* Running executables in the filesystem may result in
* a read request with kernel buffer as opposed to user buffer.
}
in += inp;
} else {
- in = pack_sg_list(chan->sg, out, VIRTQUEUE_NUM, rdata,
- req->rc->capacity);
+ in = pack_sg_list(chan->sg, out, VIRTQUEUE_NUM,
+ req->rc->sdata, req->rc->capacity);
}
err = virtqueue_add_buf(chan->vq, chan->sg, out, in, req->tc);
.close = p9_virtio_close,
.request = p9_virtio_request,
.cancel = p9_virtio_cancel,
- .maxsize = PAGE_SIZE*VIRTQUEUE_NUM,
+
+ /*
+ * We leave one entry for input and one entry for response
+ * headers. We also skip one more entry to accomodate, address
+ * that are not at page boundary, that can result in an extra
+ * page in zero copy.
+ */
+ .maxsize = PAGE_SIZE * (VIRTQUEUE_NUM - 3),
.pref = P9_TRANS_PREF_PAYLOAD_SEP,
.def = 0,
.owner = THIS_MODULE,
spin_unlock_irqrestore(&rq->lock, flags);
skb_queue_walk_safe(&queue, skb, tmp) {
- struct net_device *dev = skb->dev;
+ struct net_device *dev;
+
+ br2684_push(atmvcc, skb);
+ dev = skb->dev;
dev->stats.rx_bytes -= skb->len;
dev->stats.rx_packets--;
-
- br2684_push(atmvcc, skb);
}
/* initialize netdev carrier state */
struct orig_node *orig_node = NULL;
int data_len = skb->len, ret;
short vid = -1;
- bool do_bcast = false;
+ bool do_bcast;
if (atomic_read(&bat_priv->mesh_state) != MESH_ACTIVE)
goto dropped;
tt_local_add(soft_iface, ethhdr->h_source);
orig_node = transtable_search(bat_priv, ethhdr->h_dest);
- if (is_multicast_ether_addr(ethhdr->h_dest) ||
- (orig_node && orig_node->gw_flags)) {
+ do_bcast = is_multicast_ether_addr(ethhdr->h_dest);
+ if (do_bcast || (orig_node && orig_node->gw_flags)) {
ret = gw_is_target(bat_priv, skb, orig_node);
if (ret < 0)
goto dropped;
- if (ret == 0)
- do_bcast = true;
+ if (ret)
+ do_bcast = false;
}
/* ethernet packet should be broadcasted */
BT_DBG("sk %p", sk);
add_wait_queue(sk_sleep(sk), &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
while (sk->sk_state != state) {
- set_current_state(TASK_INTERRUPTIBLE);
-
if (!timeo) {
err = -EINPROGRESS;
break;
release_sock(sk);
timeo = schedule_timeout(timeo);
lock_sock(sk);
+ set_current_state(TASK_INTERRUPTIBLE);
err = sock_error(sk);
if (err)
break;
}
- set_current_state(TASK_RUNNING);
+ __set_current_state(TASK_RUNNING);
remove_wait_queue(sk_sleep(sk), &wait);
return err;
}
unsigned int role;
unsigned long state;
unsigned long flags;
+ atomic_t terminate;
struct task_struct *task;
struct ethhdr eh;
init_waitqueue_entry(&wait, current);
add_wait_queue(sk_sleep(sk), &wait);
- while (!kthread_should_stop()) {
+ while (1) {
set_current_state(TASK_INTERRUPTIBLE);
+ if (atomic_read(&s->terminate))
+ break;
/* RX */
while ((skb = skb_dequeue(&sk->sk_receive_queue))) {
skb_orphan(skb);
schedule();
}
- set_current_state(TASK_RUNNING);
+ __set_current_state(TASK_RUNNING);
remove_wait_queue(sk_sleep(sk), &wait);
/* Cleanup session */
down_read(&bnep_session_sem);
s = __bnep_get_session(req->dst);
- if (s)
- kthread_stop(s->task);
- else
+ if (s) {
+ atomic_inc(&s->terminate);
+ wake_up_process(s->task);
+ } else
err = -ENOENT;
up_read(&bnep_session_sem);
capi_ctr_down(ctrl);
- kthread_stop(session->task);
+ atomic_inc(&session->terminate);
+ wake_up_process(session->task);
}
static void cmtp_register_appl(struct capi_ctr *ctrl, __u16 appl, capi_register_params *rp)
char name[BTNAMSIZ];
+ atomic_t terminate;
struct task_struct *task;
wait_queue_head_t wait;
init_waitqueue_entry(&wait, current);
add_wait_queue(sk_sleep(sk), &wait);
- while (!kthread_should_stop()) {
+ while (1) {
set_current_state(TASK_INTERRUPTIBLE);
+ if (atomic_read(&session->terminate))
+ break;
if (sk->sk_state != BT_CONNECTED)
break;
schedule();
}
- set_current_state(TASK_RUNNING);
+ __set_current_state(TASK_RUNNING);
remove_wait_queue(sk_sleep(sk), &wait);
down_write(&cmtp_session_sem);
if (!(session->flags & (1 << CMTP_LOOPBACK))) {
err = cmtp_attach_device(session);
- if (err < 0)
- goto detach;
+ if (err < 0) {
+ atomic_inc(&session->terminate);
+ wake_up_process(session->task);
+ up_write(&cmtp_session_sem);
+ return err;
+ }
}
up_write(&cmtp_session_sem);
return 0;
-detach:
- cmtp_detach_device(session);
-
unlink:
__cmtp_unlink_session(session);
skb_queue_purge(&session->transmit);
/* Stop session thread */
- kthread_stop(session->task);
+ atomic_inc(&session->terminate);
+ wake_up_process(session->task);
} else
err = -ENOENT;
BT_ERR("%s command tx timeout", hdev->name);
atomic_set(&hdev->cmd_cnt, 1);
- clear_bit(HCI_RESET, &hdev->flags);
tasklet_schedule(&hdev->cmd_task);
}
entry = kzalloc(sizeof(struct bdaddr_list), GFP_KERNEL);
if (!entry) {
- return -ENOMEM;
+ err = -ENOMEM;
goto err;
}
if (hdev->sent_cmd) {
atomic_dec(&hdev->cmd_cnt);
hci_send_frame(skb);
- mod_timer(&hdev->cmd_timer,
+ if (test_bit(HCI_RESET, &hdev->flags))
+ del_timer(&hdev->cmd_timer);
+ else
+ mod_timer(&hdev->cmd_timer,
jiffies + msecs_to_jiffies(HCI_CMD_TIMEOUT));
} else {
skb_queue_head(&hdev->cmd_q, skb);
if (status)
return;
- if (test_bit(HCI_MGMT, &hdev->flags) &&
- test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+ if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) &&
+ test_bit(HCI_MGMT, &hdev->flags))
mgmt_discovering(hdev->id, 0);
hci_req_complete(hdev, HCI_OP_INQUIRY_CANCEL, status);
if (status)
return;
- if (test_bit(HCI_MGMT, &hdev->flags) &&
- test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+ if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) &&
+ test_bit(HCI_MGMT, &hdev->flags))
mgmt_discovering(hdev->id, 0);
hci_conn_check_pending(hdev);
return;
}
- if (test_bit(HCI_MGMT, &hdev->flags) &&
- !test_and_set_bit(HCI_INQUIRY,
- &hdev->flags))
+ if (!test_and_set_bit(HCI_INQUIRY, &hdev->flags) &&
+ test_bit(HCI_MGMT, &hdev->flags))
mgmt_discovering(hdev->id, 1);
}
BT_DBG("%s status %d", hdev->name, status);
- if (test_bit(HCI_MGMT, &hdev->flags) &&
- test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+ if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) &&
+ test_bit(HCI_MGMT, &hdev->flags))
mgmt_discovering(hdev->id, 0);
hci_req_complete(hdev, HCI_OP_INQUIRY, status);
up_write(&hidp_session_sem);
+ kfree(session->rd_data);
kfree(session);
return 0;
}
err = input_register_device(input);
if (err < 0) {
- hci_conn_put_device(session->conn);
+ input_free_device(input);
+ session->input = NULL;
return err;
}
}
err = hid_add_device(session->hid);
- if (err < 0)
- goto err_add_device;
+ if (err < 0) {
+ atomic_inc(&session->terminate);
+ wake_up_process(session->task);
+ up_write(&hidp_session_sem);
+ return err;
+ }
if (session->input) {
hidp_send_ctrl_message(session,
up_write(&hidp_session_sem);
return 0;
-err_add_device:
- hid_destroy_device(session->hid);
- session->hid = NULL;
- atomic_inc(&session->terminate);
- wake_up_process(session->task);
-
unlink:
hidp_del_timer(session);
failed:
up_write(&hidp_session_sem);
- input_free_device(session->input);
kfree(session);
return err;
}
int timeo = HZ/5;
add_wait_queue(sk_sleep(sk), &wait);
- while ((chan->unacked_frames > 0 && chan->conn)) {
- set_current_state(TASK_INTERRUPTIBLE);
-
+ set_current_state(TASK_INTERRUPTIBLE);
+ while (chan->unacked_frames > 0 && chan->conn) {
if (!timeo)
timeo = HZ/5;
release_sock(sk);
timeo = schedule_timeout(timeo);
lock_sock(sk);
+ set_current_state(TASK_INTERRUPTIBLE);
err = sock_error(sk);
if (err)
lock_sock_nested(sk, SINGLE_DEPTH_NESTING);
- if (sk->sk_state != BT_LISTEN) {
- err = -EBADFD;
- goto done;
- }
-
timeo = sock_rcvtimeo(sk, flags & O_NONBLOCK);
BT_DBG("sk %p timeo %ld", sk, timeo);
/* Wait for an incoming connection. (wake-one). */
add_wait_queue_exclusive(sk_sleep(sk), &wait);
- while (!(nsk = bt_accept_dequeue(sk, newsock))) {
+ while (1) {
set_current_state(TASK_INTERRUPTIBLE);
- if (!timeo) {
- err = -EAGAIN;
+
+ if (sk->sk_state != BT_LISTEN) {
+ err = -EBADFD;
break;
}
- release_sock(sk);
- timeo = schedule_timeout(timeo);
- lock_sock_nested(sk, SINGLE_DEPTH_NESTING);
+ nsk = bt_accept_dequeue(sk, newsock);
+ if (nsk)
+ break;
- if (sk->sk_state != BT_LISTEN) {
- err = -EBADFD;
+ if (!timeo) {
+ err = -EAGAIN;
break;
}
err = sock_intr_errno(timeo);
break;
}
+
+ release_sock(sk);
+ timeo = schedule_timeout(timeo);
+ lock_sock_nested(sk, SINGLE_DEPTH_NESTING);
}
- set_current_state(TASK_RUNNING);
+ __set_current_state(TASK_RUNNING);
remove_wait_queue(sk_sleep(sk), &wait);
if (err)
INIT_LIST_HEAD(&bt_sk(sk)->accept_q);
sk->sk_destruct = l2cap_sock_destruct;
- sk->sk_sndtimeo = msecs_to_jiffies(L2CAP_CONN_TIMEOUT);
+ sk->sk_sndtimeo = L2CAP_CONN_TIMEOUT;
sock_reset_flag(sk, SOCK_ZAPPED);
#define rfcomm_lock() mutex_lock(&rfcomm_mutex)
#define rfcomm_unlock() mutex_unlock(&rfcomm_mutex)
-static unsigned long rfcomm_event;
static LIST_HEAD(session_list);
{
if (!rfcomm_thread)
return;
- set_bit(RFCOMM_SCHED_WAKEUP, &rfcomm_event);
wake_up_process(rfcomm_thread);
}
rfcomm_add_listener(BDADDR_ANY);
- while (!kthread_should_stop()) {
+ while (1) {
set_current_state(TASK_INTERRUPTIBLE);
- if (!test_bit(RFCOMM_SCHED_WAKEUP, &rfcomm_event)) {
- /* No pending events. Let's sleep.
- * Incoming connections and data will wake us up. */
- schedule();
- }
- set_current_state(TASK_RUNNING);
+
+ if (kthread_should_stop())
+ break;
/* Process stuff */
- clear_bit(RFCOMM_SCHED_WAKEUP, &rfcomm_event);
rfcomm_process_sessions();
+
+ schedule();
}
+ __set_current_state(TASK_RUNNING);
rfcomm_kill_listener();
lock_sock(sk);
- if (sk->sk_state != BT_LISTEN) {
- err = -EBADFD;
- goto done;
- }
-
if (sk->sk_type != SOCK_STREAM) {
err = -EINVAL;
goto done;
/* Wait for an incoming connection. (wake-one). */
add_wait_queue_exclusive(sk_sleep(sk), &wait);
- while (!(nsk = bt_accept_dequeue(sk, newsock))) {
+ while (1) {
set_current_state(TASK_INTERRUPTIBLE);
- if (!timeo) {
- err = -EAGAIN;
+
+ if (sk->sk_state != BT_LISTEN) {
+ err = -EBADFD;
break;
}
- release_sock(sk);
- timeo = schedule_timeout(timeo);
- lock_sock(sk);
+ nsk = bt_accept_dequeue(sk, newsock);
+ if (nsk)
+ break;
- if (sk->sk_state != BT_LISTEN) {
- err = -EBADFD;
+ if (!timeo) {
+ err = -EAGAIN;
break;
}
err = sock_intr_errno(timeo);
break;
}
+
+ release_sock(sk);
+ timeo = schedule_timeout(timeo);
+ lock_sock(sk);
}
- set_current_state(TASK_RUNNING);
+ __set_current_state(TASK_RUNNING);
remove_wait_queue(sk_sleep(sk), &wait);
if (err)
lock_sock(sk);
- if (sk->sk_state != BT_LISTEN) {
- err = -EBADFD;
- goto done;
- }
-
timeo = sock_rcvtimeo(sk, flags & O_NONBLOCK);
BT_DBG("sk %p timeo %ld", sk, timeo);
/* Wait for an incoming connection. (wake-one). */
add_wait_queue_exclusive(sk_sleep(sk), &wait);
- while (!(ch = bt_accept_dequeue(sk, newsock))) {
+ while (1) {
set_current_state(TASK_INTERRUPTIBLE);
- if (!timeo) {
- err = -EAGAIN;
+
+ if (sk->sk_state != BT_LISTEN) {
+ err = -EBADFD;
break;
}
- release_sock(sk);
- timeo = schedule_timeout(timeo);
- lock_sock(sk);
+ ch = bt_accept_dequeue(sk, newsock);
+ if (ch)
+ break;
- if (sk->sk_state != BT_LISTEN) {
- err = -EBADFD;
+ if (!timeo) {
+ err = -EAGAIN;
break;
}
err = sock_intr_errno(timeo);
break;
}
+
+ release_sock(sk);
+ timeo = schedule_timeout(timeo);
+ lock_sock(sk);
}
- set_current_state(TASK_RUNNING);
+ __set_current_state(TASK_RUNNING);
remove_wait_queue(sk_sleep(sk), &wait);
if (err)
int br_add_bridge(struct net *net, const char *name)
{
struct net_device *dev;
+ int res;
dev = alloc_netdev(sizeof(struct net_bridge), name,
br_dev_setup);
dev_net_set(dev, net);
- return register_netdev(dev);
+ res = register_netdev(dev);
+ if (res)
+ free_netdev(dev);
+ return res;
}
int br_del_bridge(struct net *net, const char *name)
{
struct sk_buff *skb2;
const struct ipv6hdr *ip6h;
- struct icmp6hdr *icmp6h;
+ u8 icmp6_type;
u8 nexthdr;
unsigned len;
int offset;
__skb_pull(skb2, offset);
skb_reset_transport_header(skb2);
- icmp6h = icmp6_hdr(skb2);
+ icmp6_type = icmp6_hdr(skb2)->icmp6_type;
- switch (icmp6h->icmp6_type) {
+ switch (icmp6_type) {
case ICMPV6_MGM_QUERY:
case ICMPV6_MGM_REPORT:
case ICMPV6_MGM_REDUCTION:
err = pskb_trim_rcsum(skb2, len);
if (err)
goto out;
+ err = -EINVAL;
}
+ ip6h = ipv6_hdr(skb2);
+
switch (skb2->ip_summed) {
case CHECKSUM_COMPLETE:
- if (!csum_fold(skb2->csum))
+ if (!csum_ipv6_magic(&ip6h->saddr, &ip6h->daddr, skb2->len,
+ IPPROTO_ICMPV6, skb2->csum))
break;
/*FALLTHROUGH*/
case CHECKSUM_NONE:
- skb2->csum = 0;
- if (skb_checksum_complete(skb2))
+ skb2->csum = ~csum_unfold(csum_ipv6_magic(&ip6h->saddr,
+ &ip6h->daddr,
+ skb2->len,
+ IPPROTO_ICMPV6, 0));
+ if (__skb_checksum_complete(skb2))
goto out;
}
BR_INPUT_SKB_CB(skb)->igmp = 1;
- switch (icmp6h->icmp6_type) {
+ switch (icmp6_type) {
case ICMPV6_MGM_REPORT:
{
struct mld_msg *mld;
menuconfig BRIDGE_NF_EBTABLES
tristate "Ethernet Bridge tables (ebtables) support"
- depends on BRIDGE && BRIDGE_NETFILTER
+ depends on BRIDGE && NETFILTER
select NETFILTER_XTABLES
help
ebtables is a general, extensible frame/packet identification
caifdevs = caif_device_list(dev_net(dev));
BUG_ON(!caifdevs);
- caifd = kzalloc(sizeof(*caifd), GFP_ATOMIC);
+ caifd = kzalloc(sizeof(*caifd), GFP_KERNEL);
if (!caifd)
return NULL;
caifd->pcpu_refcnt = alloc_percpu(int);
+ if (!caifd->pcpu_refcnt) {
+ kfree(caifd);
+ return NULL;
+ }
caifd->netdev = dev;
dev_hold(dev);
return caifd;
struct net_device *dev;
if (stats_timer)
- del_timer(&can_stattimer);
+ del_timer_sync(&can_stattimer);
can_remove_proc();
}
}
+static void bcm_tx_start_timer(struct bcm_op *op)
+{
+ if (op->kt_ival1.tv64 && op->count)
+ hrtimer_start(&op->timer,
+ ktime_add(ktime_get(), op->kt_ival1),
+ HRTIMER_MODE_ABS);
+ else if (op->kt_ival2.tv64)
+ hrtimer_start(&op->timer,
+ ktime_add(ktime_get(), op->kt_ival2),
+ HRTIMER_MODE_ABS);
+}
+
static void bcm_tx_timeout_tsklet(unsigned long data)
{
struct bcm_op *op = (struct bcm_op *)data;
bcm_send_to_user(op, &msg_head, NULL, 0);
}
- }
-
- if (op->kt_ival1.tv64 && (op->count > 0)) {
-
- /* send (next) frame */
bcm_can_tx(op);
- hrtimer_start(&op->timer,
- ktime_add(ktime_get(), op->kt_ival1),
- HRTIMER_MODE_ABS);
- } else {
- if (op->kt_ival2.tv64) {
+ } else if (op->kt_ival2.tv64)
+ bcm_can_tx(op);
- /* send (next) frame */
- bcm_can_tx(op);
- hrtimer_start(&op->timer,
- ktime_add(ktime_get(), op->kt_ival2),
- HRTIMER_MODE_ABS);
- }
- }
+ bcm_tx_start_timer(op);
}
/*
hrtimer_cancel(&op->timer);
}
- if ((op->flags & STARTTIMER) &&
- ((op->kt_ival1.tv64 && op->count) || op->kt_ival2.tv64)) {
-
+ if (op->flags & STARTTIMER) {
+ hrtimer_cancel(&op->timer);
/* spec: send can_frame when starting timer */
op->flags |= TX_ANNOUNCE;
-
- if (op->kt_ival1.tv64 && (op->count > 0)) {
- /* op->count-- is done in bcm_tx_timeout_handler */
- hrtimer_start(&op->timer, op->kt_ival1,
- HRTIMER_MODE_REL);
- } else
- hrtimer_start(&op->timer, op->kt_ival2,
- HRTIMER_MODE_REL);
}
- if (op->flags & TX_ANNOUNCE)
+ if (op->flags & TX_ANNOUNCE) {
bcm_can_tx(op);
+ if (op->count)
+ op->count--;
+ }
+
+ if (op->flags & STARTTIMER)
+ bcm_tx_start_timer(op);
return msg_head->nframes * CFSIZ + MHSIZ;
}
ceph_crypto_key_destroy(opt->key);
kfree(opt->key);
}
+ kfree(opt->mon_addr);
kfree(opt);
}
EXPORT_SYMBOL(ceph_destroy_options);
m->front_max = front_len;
m->front_is_vmalloc = false;
m->more_to_follow = false;
+ m->ack_stamp = 0;
m->pool = NULL;
/* middle */
#include <linux/ceph/msgpool.h>
-static void *alloc_fn(gfp_t gfp_mask, void *arg)
+static void *msgpool_alloc(gfp_t gfp_mask, void *arg)
{
struct ceph_msgpool *pool = arg;
- void *p;
+ struct ceph_msg *msg;
- p = ceph_msg_new(0, pool->front_len, gfp_mask);
- if (!p)
- pr_err("msgpool %s alloc failed\n", pool->name);
- return p;
+ msg = ceph_msg_new(0, pool->front_len, gfp_mask);
+ if (!msg) {
+ dout("msgpool_alloc %s failed\n", pool->name);
+ } else {
+ dout("msgpool_alloc %s %p\n", pool->name, msg);
+ msg->pool = pool;
+ }
+ return msg;
}
-static void free_fn(void *element, void *arg)
+static void msgpool_free(void *element, void *arg)
{
- ceph_msg_put(element);
+ struct ceph_msgpool *pool = arg;
+ struct ceph_msg *msg = element;
+
+ dout("msgpool_release %s %p\n", pool->name, msg);
+ msg->pool = NULL;
+ ceph_msg_put(msg);
}
int ceph_msgpool_init(struct ceph_msgpool *pool,
int front_len, int size, bool blocking, const char *name)
{
+ dout("msgpool %s init\n", name);
pool->front_len = front_len;
- pool->pool = mempool_create(size, alloc_fn, free_fn, pool);
+ pool->pool = mempool_create(size, msgpool_alloc, msgpool_free, pool);
if (!pool->pool)
return -ENOMEM;
pool->name = name;
void ceph_msgpool_destroy(struct ceph_msgpool *pool)
{
+ dout("msgpool %s destroy\n", pool->name);
mempool_destroy(pool->pool);
}
struct ceph_msg *ceph_msgpool_get(struct ceph_msgpool *pool,
int front_len)
{
+ struct ceph_msg *msg;
+
if (front_len > pool->front_len) {
- pr_err("msgpool_get pool %s need front %d, pool size is %d\n",
+ dout("msgpool_get %s need front %d, pool size is %d\n",
pool->name, front_len, pool->front_len);
WARN_ON(1);
return ceph_msg_new(0, front_len, GFP_NOFS);
}
- return mempool_alloc(pool->pool, GFP_NOFS);
+ msg = mempool_alloc(pool->pool, GFP_NOFS);
+ dout("msgpool_get %s %p\n", pool->name, msg);
+ return msg;
}
void ceph_msgpool_put(struct ceph_msgpool *pool, struct ceph_msg *msg)
{
+ dout("msgpool_put %s %p\n", pool->name, msg);
+
/* reset msg front_len; user may have changed it */
msg->front.iov_len = pool->front_len;
msg->hdr.front_len = cpu_to_le32(pool->front_len);
kref_init(&msg->kref); /* retake single ref */
+ mempool_free(msg, pool->pool);
}
INIT_LIST_HEAD(&req->r_unsafe_item);
INIT_LIST_HEAD(&req->r_linger_item);
INIT_LIST_HEAD(&req->r_linger_osd);
+ INIT_LIST_HEAD(&req->r_req_lru_item);
req->r_flags = flags;
WARN_ON((flags & (CEPH_OSD_FLAG_READ|CEPH_OSD_FLAG_WRITE)) == 0);
put_osd(osd);
}
+static void remove_all_osds(struct ceph_osd_client *osdc)
+{
+ dout("__remove_old_osds %p\n", osdc);
+ mutex_lock(&osdc->request_mutex);
+ while (!RB_EMPTY_ROOT(&osdc->osds)) {
+ struct ceph_osd *osd = rb_entry(rb_first(&osdc->osds),
+ struct ceph_osd, o_node);
+ __remove_osd(osdc, osd);
+ }
+ mutex_unlock(&osdc->request_mutex);
+}
+
static void __move_osd_to_lru(struct ceph_osd_client *osdc,
struct ceph_osd *osd)
{
list_del_init(&osd->o_osd_lru);
}
-static void remove_old_osds(struct ceph_osd_client *osdc, int remove_all)
+static void remove_old_osds(struct ceph_osd_client *osdc)
{
struct ceph_osd *osd, *nosd;
dout("__remove_old_osds %p\n", osdc);
mutex_lock(&osdc->request_mutex);
list_for_each_entry_safe(osd, nosd, &osdc->osd_lru, o_osd_lru) {
- if (!remove_all && time_before(jiffies, osd->lru_ttl))
+ if (time_before(jiffies, osd->lru_ttl))
break;
__remove_osd(osdc, osd);
}
struct rb_node *parent = NULL;
struct ceph_osd *osd = NULL;
+ dout("__insert_osd %p osd%d\n", new, new->o_osd);
while (*p) {
parent = *p;
osd = rb_entry(parent, struct ceph_osd, o_node);
{
req->r_tid = ++osdc->last_tid;
req->r_request->hdr.tid = cpu_to_le64(req->r_tid);
- INIT_LIST_HEAD(&req->r_req_lru_item);
-
dout("__register_request %p tid %lld\n", req, req->r_tid);
__insert_request(osdc, req);
ceph_osdc_get_request(req);
osdc->num_requests++;
-
if (osdc->num_requests == 1) {
dout(" first request, scheduling timeout\n");
__schedule_osd_timeout(osdc);
dout("osds timeout\n");
down_read(&osdc->map_sem);
- remove_old_osds(osdc, 0);
+ remove_old_osds(osdc);
up_read(&osdc->map_sem);
schedule_delayed_work(&osdc->osds_timeout_work,
ceph_osdmap_destroy(osdc->osdmap);
osdc->osdmap = NULL;
}
- remove_old_osds(osdc, 1);
- WARN_ON(!RB_EMPTY_ROOT(&osdc->osds));
+ remove_all_osds(osdc);
mempool_destroy(osdc->req_mempool);
ceph_msgpool_destroy(&osdc->msgpool_op);
ceph_msgpool_destroy(&osdc->msgpool_op_reply);
struct ceph_pg_mapping *pg = NULL;
int c;
+ dout("__insert_pg_mapping %llx %p\n", *(u64 *)&new->pgid, new);
while (*p) {
parent = *p;
pg = rb_entry(parent, struct ceph_pg_mapping, node);
while (n) {
pg = rb_entry(n, struct ceph_pg_mapping, node);
c = pgid_cmp(pgid, pg->pgid);
- if (c < 0)
+ if (c < 0) {
n = n->rb_left;
- else if (c > 0)
+ } else if (c > 0) {
n = n->rb_right;
- else
+ } else {
+ dout("__lookup_pg_mapping %llx got %p\n",
+ *(u64 *)&pgid, pg);
return pg;
+ }
}
return NULL;
}
+static int __remove_pg_mapping(struct rb_root *root, struct ceph_pg pgid)
+{
+ struct ceph_pg_mapping *pg = __lookup_pg_mapping(root, pgid);
+
+ if (pg) {
+ dout("__remove_pg_mapping %llx %p\n", *(u64 *)&pgid, pg);
+ rb_erase(&pg->node, root);
+ kfree(pg);
+ return 0;
+ }
+ dout("__remove_pg_mapping %llx dne\n", *(u64 *)&pgid);
+ return -ENOENT;
+}
+
/*
* rbtree of pg pool info
*/
void *start = *p;
int err = -EINVAL;
u16 version;
- struct rb_node *rbp;
ceph_decode_16_safe(p, end, version, bad);
if (version > CEPH_OSDMAP_INC_VERSION) {
}
/* new_pg_temp */
- rbp = rb_first(&map->pg_temp);
ceph_decode_32_safe(p, end, len, bad);
while (len--) {
struct ceph_pg_mapping *pg;
ceph_decode_copy(p, &pgid, sizeof(pgid));
pglen = ceph_decode_32(p);
- /* remove any? */
- while (rbp && pgid_cmp(rb_entry(rbp, struct ceph_pg_mapping,
- node)->pgid, pgid) <= 0) {
- struct ceph_pg_mapping *cur =
- rb_entry(rbp, struct ceph_pg_mapping, node);
-
- rbp = rb_next(rbp);
- dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
- rb_erase(&cur->node, &map->pg_temp);
- kfree(cur);
- }
-
if (pglen) {
/* insert */
ceph_decode_need(p, end, pglen*sizeof(u32), bad);
}
dout(" added pg_temp %llx len %d\n", *(u64 *)&pgid,
pglen);
+ } else {
+ /* remove */
+ __remove_pg_mapping(&map->pg_temp, pgid);
}
}
- while (rbp) {
- struct ceph_pg_mapping *cur =
- rb_entry(rbp, struct ceph_pg_mapping, node);
-
- rbp = rb_next(rbp);
- dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
- rb_erase(&cur->node, &map->pg_temp);
- kfree(cur);
- }
/* ignore the rest */
*p = end;
struct ceph_pg_mapping *pg;
struct ceph_pg_pool_info *pool;
int ruleno;
- unsigned poolid, ps, pps;
+ unsigned poolid, ps, pps, t;
int preferred;
+ poolid = le32_to_cpu(pgid.pool);
+ ps = le16_to_cpu(pgid.ps);
+ preferred = (s16)le16_to_cpu(pgid.preferred);
+
+ pool = __lookup_pg_pool(&osdmap->pg_pools, poolid);
+ if (!pool)
+ return NULL;
+
/* pg_temp? */
+ if (preferred >= 0)
+ t = ceph_stable_mod(ps, le32_to_cpu(pool->v.lpg_num),
+ pool->lpgp_num_mask);
+ else
+ t = ceph_stable_mod(ps, le32_to_cpu(pool->v.pg_num),
+ pool->pgp_num_mask);
+ pgid.ps = cpu_to_le16(t);
pg = __lookup_pg_mapping(&osdmap->pg_temp, pgid);
if (pg) {
*num = pg->len;
}
/* crush */
- poolid = le32_to_cpu(pgid.pool);
- ps = le16_to_cpu(pgid.ps);
- preferred = (s16)le16_to_cpu(pgid.preferred);
-
- /* don't forcefeed bad device ids to crush */
- if (preferred >= osdmap->max_osd ||
- preferred >= osdmap->crush->max_devices)
- preferred = -1;
-
- pool = __lookup_pg_pool(&osdmap->pg_pools, poolid);
- if (!pool)
- return NULL;
ruleno = crush_find_rule(osdmap->crush, pool->v.crush_ruleset,
pool->v.type, pool->v.size);
if (ruleno < 0) {
return NULL;
}
+ /* don't forcefeed bad device ids to crush */
+ if (preferred >= osdmap->max_osd ||
+ preferred >= osdmap->crush->max_devices)
+ preferred = -1;
+
if (preferred >= 0)
pps = ceph_stable_mod(ps,
le32_to_cpu(pool->v.lpgp_num),
*/
int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
{
+ if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) {
+ if (skb_copy_ubufs(skb, GFP_ATOMIC)) {
+ atomic_long_inc(&dev->rx_dropped);
+ kfree_skb(skb);
+ return NET_RX_DROP;
+ }
+ }
+
skb_orphan(skb);
nf_reset(skb);
*/
list_for_each_entry(r, &ops->rules_list, list) {
if (r->action == FR_ACT_GOTO &&
- r->target == rule->pref) {
- BUG_ON(rtnl_dereference(r->ctarget) != NULL);
+ r->target == rule->pref &&
+ rtnl_dereference(r->ctarget) == NULL) {
rcu_assign_pointer(r->ctarget, rule);
if (--ops->unresolved_rules == 0)
break;
struct hlist_node hlist;
struct list_head gc_list;
} u;
+ struct net *net;
u16 family;
u8 dir;
u32 genid;
static u32 flow_hash_code(struct flow_cache *fc,
struct flow_cache_percpu *fcp,
- const struct flowi *key)
+ const struct flowi *key,
+ size_t keysize)
{
const u32 *k = (const u32 *) key;
+ const u32 length = keysize * sizeof(flow_compare_t) / sizeof(u32);
- return jhash2(k, (sizeof(*key) / sizeof(u32)), fcp->hash_rnd)
+ return jhash2(k, length, fcp->hash_rnd)
& (flow_cache_hash_size(fc) - 1);
}
-typedef unsigned long flow_compare_t;
-
/* I hear what you're saying, use memcmp. But memcmp cannot make
- * important assumptions that we can here, such as alignment and
- * constant size.
+ * important assumptions that we can here, such as alignment.
*/
-static int flow_key_compare(const struct flowi *key1, const struct flowi *key2)
+static int flow_key_compare(const struct flowi *key1, const struct flowi *key2,
+ size_t keysize)
{
const flow_compare_t *k1, *k1_lim, *k2;
- const int n_elem = sizeof(struct flowi) / sizeof(flow_compare_t);
-
- BUILD_BUG_ON(sizeof(struct flowi) % sizeof(flow_compare_t));
k1 = (const flow_compare_t *) key1;
- k1_lim = k1 + n_elem;
+ k1_lim = k1 + keysize;
k2 = (const flow_compare_t *) key2;
struct flow_cache_entry *fle, *tfle;
struct hlist_node *entry;
struct flow_cache_object *flo;
+ size_t keysize;
unsigned int hash;
local_bh_disable();
fle = NULL;
flo = NULL;
+
+ keysize = flow_key_size(family);
+ if (!keysize)
+ goto nocache;
+
/* Packet really early in init? Making flow_cache_init a
* pre-smp initcall would solve this. --RR */
if (!fcp->hash_table)
if (fcp->hash_rnd_recalc)
flow_new_hash_rnd(fc, fcp);
- hash = flow_hash_code(fc, fcp, key);
+ hash = flow_hash_code(fc, fcp, key, keysize);
hlist_for_each_entry(tfle, entry, &fcp->hash_table[hash], u.hlist) {
- if (tfle->family == family &&
+ if (tfle->net == net &&
+ tfle->family == family &&
tfle->dir == dir &&
- flow_key_compare(key, &tfle->key) == 0) {
+ flow_key_compare(key, &tfle->key, keysize) == 0) {
fle = tfle;
break;
}
fle = kmem_cache_alloc(flow_cachep, GFP_ATOMIC);
if (fle) {
+ fle->net = net;
fle->family = family;
fle->dir = dir;
- memcpy(&fle->key, key, sizeof(*key));
+ memcpy(&fle->key, key, keysize * sizeof(flow_compare_t));
fle->object = NULL;
hlist_add_head(&fle->u.hlist, &fcp->hash_table[hash]);
fcp->hash_count++;
if (tdif <= 0) {
struct net_device *dev = skb->dev;
+
__skb_unlink(skb, &tbl->proxy_queue);
- if (tbl->proxy_redo && netif_running(dev))
+ if (tbl->proxy_redo && netif_running(dev)) {
+ rcu_read_lock();
tbl->proxy_redo(skb);
- else
+ rcu_read_unlock();
+ } else {
kfree_skb(skb);
+ }
dev_put(dev);
} else if (!sched_next || tdif < sched_next)
if (skb_shared(skb))
goto out;
- iph = (struct iphdr *)skb->data;
if (!pskb_may_pull(skb, sizeof(struct iphdr)))
goto out;
+ iph = (struct iphdr *)skb->data;
if (iph->ihl < 5 || iph->version != 4)
goto out;
if (!pskb_may_pull(skb, iph->ihl*4))
goto out;
+ iph = (struct iphdr *)skb->data;
if (ip_fast_csum((u8 *)iph, iph->ihl) != 0)
goto out;
if (pskb_trim_rcsum(skb, len))
goto out;
+ iph = (struct iphdr *)skb->data;
if (iph->protocol != IPPROTO_UDP)
goto out;
}
EXPORT_SYMBOL_GPL(skb_morph);
-/* skb frags copy userspace buffers to kernel */
-static int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask)
+/* skb_copy_ubufs - copy userspace skb frags buffers to kernel
+ * @skb: the skb to modify
+ * @gfp_mask: allocation priority
+ *
+ * This must be called on SKBTX_DEV_ZEROCOPY skb.
+ * It will copy all frags into kernel and drop the reference
+ * to userspace pages.
+ *
+ * If this function is called from an interrupt gfp_mask() must be
+ * %GFP_ATOMIC.
+ *
+ * Returns 0 on success or a negative error code on failure
+ * to allocate kernel memory to copy to.
+ */
+int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask)
{
int i;
int num_frags = skb_shinfo(skb)->nr_frags;
skb_shinfo(skb)->frags[i - 1].page = head;
head = (struct page *)head->private;
}
+
+ skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
return 0;
}
if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) {
if (skb_copy_ubufs(skb, gfp_mask))
return NULL;
- skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
}
n = skb + 1;
n = NULL;
goto out;
}
- skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
}
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
skb_shinfo(n)->frags[i] = skb_shinfo(skb)->frags[i];
if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) {
if (skb_copy_ubufs(skb, gfp_mask))
goto nofrags;
- skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
}
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
get_page(skb_shinfo(skb)->frags[i].page);
dev->addr_len = ETH_ALEN;
dev->tx_queue_len = 1000; /* Ethernet wants good queues */
dev->flags = IFF_BROADCAST|IFF_MULTICAST;
- dev->priv_flags = IFF_TX_SKB_SHARING;
+ dev->priv_flags |= IFF_TX_SKB_SHARING;
memset(dev->broadcast, 0xFF, ETH_ALEN);
goto out;
if (addr->sin_family != AF_INET) {
+ /* Compatibility games : accept AF_UNSPEC (mapped to AF_INET)
+ * only if s_addr is INADDR_ANY.
+ */
err = -EAFNOSUPPORT;
- goto out;
+ if (addr->sin_family != AF_UNSPEC ||
+ addr->sin_addr.s_addr != htonl(INADDR_ANY))
+ goto out;
}
chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr);
};
/* Release a nexthop info record */
+static void free_fib_info_rcu(struct rcu_head *head)
+{
+ struct fib_info *fi = container_of(head, struct fib_info, rcu);
+
+ if (fi->fib_metrics != (u32 *) dst_default_metrics)
+ kfree(fi->fib_metrics);
+ kfree(fi);
+}
void free_fib_info(struct fib_info *fi)
{
} endfor_nexthops(fi);
fib_info_cnt--;
release_net(fi->fib_net);
- kfree_rcu(fi, rcu);
+ call_rcu(&fi->rcu, free_fib_info_rcu);
}
void fib_release_info(struct fib_info *fi)
break;
for (i=0; i<nsrcs; i++) {
/* skip inactive filters */
- if (pmc->sfcount[MCAST_INCLUDE] ||
+ if (psf->sf_count[MCAST_INCLUDE] ||
pmc->sfcount[MCAST_EXCLUDE] !=
psf->sf_count[MCAST_EXCLUDE])
continue;
return skb;
nlmsg_failure:
+ kfree_skb(skb);
*errp = -EINVAL;
printk(KERN_ERR "ip_queue: error creating packet message\n");
return NULL;
{
struct nf_queue_entry *entry;
- if (vmsg->value > NF_MAX_VERDICT)
+ if (vmsg->value > NF_MAX_VERDICT || vmsg->value == NF_STOLEN)
return -EINVAL;
entry = ipq_find_dequeue_entry(vmsg->id);
break;
case IPQM_VERDICT:
- if (pmsg->msg.verdict.value > NF_MAX_VERDICT)
- status = -EINVAL;
- else
- status = ipq_set_verdict(&pmsg->msg.verdict,
- len - sizeof(*pmsg));
- break;
+ status = ipq_set_verdict(&pmsg->msg.verdict,
+ len - sizeof(*pmsg));
+ break;
default:
status = -EINVAL;
}
SNMP_MIB_ITEM("TCPDeferAcceptDrop", LINUX_MIB_TCPDEFERACCEPTDROP),
SNMP_MIB_ITEM("IPReversePathFilter", LINUX_MIB_IPRPFILTER),
SNMP_MIB_ITEM("TCPTimeWaitOverflow", LINUX_MIB_TCPTIMEWAITOVERFLOW),
+ SNMP_MIB_ITEM("TCPReqQFullDoCookies", LINUX_MIB_TCPREQQFULLDOCOOKIES),
+ SNMP_MIB_ITEM("TCPReqQFullDrop", LINUX_MIB_TCPREQQFULLDROP),
SNMP_MIB_SENTINEL
};
return 0;
/* ...Then it's D-SACK, and must reside below snd_una completely */
- if (!after(end_seq, tp->snd_una))
+ if (after(end_seq, tp->snd_una))
return 0;
if (!before(start_seq, tp->undo_marker))
kfree(inet_rsk(req)->opt);
}
-static void syn_flood_warning(const struct sk_buff *skb)
+/*
+ * Return 1 if a syncookie should be sent
+ */
+int tcp_syn_flood_action(struct sock *sk,
+ const struct sk_buff *skb,
+ const char *proto)
{
- const char *msg;
+ const char *msg = "Dropping request";
+ int want_cookie = 0;
+ struct listen_sock *lopt;
+
+
#ifdef CONFIG_SYN_COOKIES
- if (sysctl_tcp_syncookies)
+ if (sysctl_tcp_syncookies) {
msg = "Sending cookies";
- else
+ want_cookie = 1;
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPREQQFULLDOCOOKIES);
+ } else
#endif
- msg = "Dropping request";
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPREQQFULLDROP);
- pr_info("TCP: Possible SYN flooding on port %d. %s.\n",
- ntohs(tcp_hdr(skb)->dest), msg);
+ lopt = inet_csk(sk)->icsk_accept_queue.listen_opt;
+ if (!lopt->synflood_warned) {
+ lopt->synflood_warned = 1;
+ pr_info("%s: Possible SYN flooding on port %d. %s. "
+ " Check SNMP counters.\n",
+ proto, ntohs(tcp_hdr(skb)->dest), msg);
+ }
+ return want_cookie;
}
+EXPORT_SYMBOL(tcp_syn_flood_action);
/*
* Save and compile IPv4 options into the request_sock if needed.
__be32 saddr = ip_hdr(skb)->saddr;
__be32 daddr = ip_hdr(skb)->daddr;
__u32 isn = TCP_SKB_CB(skb)->when;
-#ifdef CONFIG_SYN_COOKIES
int want_cookie = 0;
-#else
-#define want_cookie 0 /* Argh, why doesn't gcc optimize this :( */
-#endif
/* Never answer to SYNs send to broadcast or multicast */
if (skb_rtable(skb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
* evidently real one.
*/
if (inet_csk_reqsk_queue_is_full(sk) && !isn) {
- if (net_ratelimit())
- syn_flood_warning(skb);
-#ifdef CONFIG_SYN_COOKIES
- if (sysctl_tcp_syncookies) {
- want_cookie = 1;
- } else
-#endif
- goto drop;
+ want_cookie = tcp_syn_flood_action(sk, skb, "TCP");
+ if (!want_cookie)
+ goto drop;
}
/* Accept backlog is full. If we have already queued enough
while (l-- > 0)
*c++ ^= *hash_location++;
-#ifdef CONFIG_SYN_COOKIES
want_cookie = 0; /* not our kind of cookie */
-#endif
tmp_ext.cookie_out_never = 0; /* false */
tmp_ext.cookie_plus = tmp_opt.cookie_plus;
} else if (!tp->rx_opt.cookie_in_always) {
"%s(): cannot allocate memory for statistics; dev=%s.\n",
__func__, dev->name));
neigh_parms_release(&nd_tbl, ndev->nd_parms);
- ndev->dead = 1;
- in6_dev_finish_destroy(ndev);
+ dev_put(dev);
+ kfree(ndev);
return NULL;
}
return 0;
}
-int datagram_send_ctl(struct net *net,
+int datagram_send_ctl(struct net *net, struct sock *sk,
struct msghdr *msg, struct flowi6 *fl6,
struct ipv6_txoptions *opt,
int *hlimit, int *tclass, int *dontfrag)
if (addr_type != IPV6_ADDR_ANY) {
int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
- if (!ipv6_chk_addr(net, &src_info->ipi6_addr,
+ if (!inet_sk(sk)->transparent &&
+ !ipv6_chk_addr(net, &src_info->ipi6_addr,
strict ? dev : NULL, 0))
err = -EINVAL;
else
}
static struct ip6_flowlabel *
-fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval,
- int optlen, int *err_p)
+fl_create(struct net *net, struct sock *sk, struct in6_flowlabel_req *freq,
+ char __user *optval, int optlen, int *err_p)
{
struct ip6_flowlabel *fl = NULL;
int olen;
msg.msg_control = (void*)(fl->opt+1);
memset(&flowi6, 0, sizeof(flowi6));
- err = datagram_send_ctl(net, &msg, &flowi6, fl->opt, &junk,
+ err = datagram_send_ctl(net, sk, &msg, &flowi6, fl->opt, &junk,
&junk, &junk);
if (err)
goto done;
if (freq.flr_label & ~IPV6_FLOWLABEL_MASK)
return -EINVAL;
- fl = fl_create(net, &freq, optval, optlen, &err);
+ fl = fl_create(net, sk, &freq, optval, optlen, &err);
if (fl == NULL)
return err;
sfl1 = kmalloc(sizeof(*sfl1), GFP_KERNEL);
int err;
err = ip6mr_fib_lookup(net, &fl6, &mrt);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(skb);
return err;
+ }
read_lock(&mrt_lock);
dev->stats.tx_bytes += skb->len;
int err;
err = ip6mr_fib_lookup(net, &fl6, &mrt);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(skb);
return err;
+ }
read_lock(&mrt_lock);
cache = ip6mr_cache_find(mrt,
msg.msg_controllen = optlen;
msg.msg_control = (void*)(opt+1);
- retv = datagram_send_ctl(net, &msg, &fl6, opt, &junk, &junk,
+ retv = datagram_send_ctl(net, sk, &msg, &fl6, opt, &junk, &junk,
&junk);
if (retv)
goto done;
}
static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int __user *optlen)
+ char __user *optval, int __user *optlen, unsigned flags)
{
struct ipv6_pinfo *np = inet6_sk(sk);
int len;
msg.msg_control = optval;
msg.msg_controllen = len;
- msg.msg_flags = 0;
+ msg.msg_flags = flags;
lock_sock(sk);
skb = np->pktoptions;
if(level != SOL_IPV6)
return -ENOPROTOOPT;
- err = do_ipv6_getsockopt(sk, level, optname, optval, optlen);
+ err = do_ipv6_getsockopt(sk, level, optname, optval, optlen, 0);
#ifdef CONFIG_NETFILTER
/* we need to exclude all possible ENOPROTOOPTs except default case */
if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) {
return compat_mc_getsockopt(sk, level, optname, optval, optlen,
ipv6_getsockopt);
- err = do_ipv6_getsockopt(sk, level, optname, optval, optlen);
+ err = do_ipv6_getsockopt(sk, level, optname, optval, optlen,
+ MSG_CMSG_COMPAT);
#ifdef CONFIG_NETFILTER
/* we need to exclude all possible ENOPROTOOPTs except default case */
if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) {
break;
for (i=0; i<nsrcs; i++) {
/* skip inactive filters */
- if (pmc->mca_sfcount[MCAST_INCLUDE] ||
+ if (psf->sf_count[MCAST_INCLUDE] ||
pmc->mca_sfcount[MCAST_EXCLUDE] !=
psf->sf_count[MCAST_EXCLUDE])
continue;
return skb;
nlmsg_failure:
+ kfree_skb(skb);
*errp = -EINVAL;
printk(KERN_ERR "ip6_queue: error creating packet message\n");
return NULL;
{
struct nf_queue_entry *entry;
- if (vmsg->value > NF_MAX_VERDICT)
+ if (vmsg->value > NF_MAX_VERDICT || vmsg->value == NF_STOLEN)
return -EINVAL;
entry = ipq_find_dequeue_entry(vmsg->id);
break;
case IPQM_VERDICT:
- if (pmsg->msg.verdict.value > NF_MAX_VERDICT)
- status = -EINVAL;
- else
- status = ipq_set_verdict(&pmsg->msg.verdict,
- len - sizeof(*pmsg));
- break;
+ status = ipq_set_verdict(&pmsg->msg.verdict,
+ len - sizeof(*pmsg));
+ break;
default:
status = -EINVAL;
}
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(struct ipv6_txoptions);
- err = datagram_send_ctl(sock_net(sk), msg, &fl6, opt, &hlimit,
- &tclass, &dontfrag);
+ err = datagram_send_ctl(sock_net(sk), sk, msg, &fl6, opt,
+ &hlimit, &tclass, &dontfrag);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
struct inet_peer *peer;
u32 *p = NULL;
+ if (!(rt->dst.flags & DST_HOST))
+ return NULL;
+
if (!rt->rt6i_peer)
rt6_bind_peer(rt, 1);
{
struct rt6_info *rt = dst_alloc(ops, dev, 0, 0, flags);
- memset(&rt->rt6i_table, 0, sizeof(*rt) - sizeof(struct dst_entry));
+ if (rt != NULL)
+ memset(&rt->rt6i_table, 0,
+ sizeof(*rt) - sizeof(struct dst_entry));
return rt;
}
struct inet6_dev *idev = rt->rt6i_idev;
struct inet_peer *peer = rt->rt6i_peer;
+ if (!(rt->dst.flags & DST_HOST))
+ dst_destroy_metrics_generic(dst);
+
if (idev != NULL) {
rt->rt6i_idev = NULL;
in6_dev_put(idev);
ipv6_addr_copy(&rt->rt6i_gateway, daddr);
}
- rt->rt6i_dst.plen = 128;
rt->rt6i_flags |= RTF_CACHE;
- rt->dst.flags |= DST_HOST;
#ifdef CONFIG_IPV6_SUBTREES
if (rt->rt6i_src.plen && saddr) {
struct rt6_info *rt = ip6_rt_copy(ort, daddr);
if (rt) {
- rt->rt6i_dst.plen = 128;
rt->rt6i_flags |= RTF_CACHE;
- rt->dst.flags |= DST_HOST;
dst_set_neighbour(&rt->dst, neigh_clone(dst_get_neighbour_raw(&ort->dst)));
}
return rt;
neigh = NULL;
}
- rt->rt6i_idev = idev;
+ rt->dst.flags |= DST_HOST;
+ rt->dst.output = ip6_output;
dst_set_neighbour(&rt->dst, neigh);
atomic_set(&rt->dst.__refcnt, 1);
- ipv6_addr_copy(&rt->rt6i_dst.addr, addr);
dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);
- rt->dst.output = ip6_output;
+
+ ipv6_addr_copy(&rt->rt6i_dst.addr, addr);
+ rt->rt6i_dst.plen = 128;
+ rt->rt6i_idev = idev;
spin_lock_bh(&icmp6_dst_lock);
rt->dst.next = icmp6_dst_gc_list;
if (rt->rt6i_dst.plen == 128)
rt->dst.flags |= DST_HOST;
+ if (!(rt->dst.flags & DST_HOST) && cfg->fc_mx) {
+ u32 *metrics = kzalloc(sizeof(u32) * RTAX_MAX, GFP_KERNEL);
+ if (!metrics) {
+ err = -ENOMEM;
+ goto out;
+ }
+ dst_init_metrics(&rt->dst, metrics, 0);
+ }
#ifdef CONFIG_IPV6_SUBTREES
ipv6_addr_prefix(&rt->rt6i_src.addr, &cfg->fc_src, cfg->fc_src_len);
rt->rt6i_src.plen = cfg->fc_src_len;
if (on_link)
nrt->rt6i_flags &= ~RTF_GATEWAY;
- nrt->rt6i_dst.plen = 128;
- nrt->dst.flags |= DST_HOST;
-
ipv6_addr_copy(&nrt->rt6i_gateway, (struct in6_addr*)neigh->primary_key);
dst_set_neighbour(&nrt->dst, neigh_clone(neigh));
if (rt) {
rt->dst.input = ort->dst.input;
rt->dst.output = ort->dst.output;
+ rt->dst.flags |= DST_HOST;
ipv6_addr_copy(&rt->rt6i_dst.addr, dest);
- rt->rt6i_dst.plen = ort->rt6i_dst.plen;
+ rt->rt6i_dst.plen = 128;
dst_copy_metrics(&rt->dst, &ort->dst);
rt->dst.error = ort->dst.error;
rt->rt6i_idev = ort->rt6i_idev;
if (skb->protocol != htons(ETH_P_IPV6))
goto tx_error;
+ if (tos == 1)
+ tos = ipv6_get_dsfield(iph6);
+
/* ISATAP (RFC4214) - must come before 6to4 */
if (dev->priv_flags & IFF_ISATAP) {
struct neighbour *neigh = NULL;
return tcp_v6_send_synack(sk, req, rvp);
}
-static inline void syn_flood_warning(struct sk_buff *skb)
-{
-#ifdef CONFIG_SYN_COOKIES
- if (sysctl_tcp_syncookies)
- printk(KERN_INFO
- "TCPv6: Possible SYN flooding on port %d. "
- "Sending cookies.\n", ntohs(tcp_hdr(skb)->dest));
- else
-#endif
- printk(KERN_INFO
- "TCPv6: Possible SYN flooding on port %d. "
- "Dropping request.\n", ntohs(tcp_hdr(skb)->dest));
-}
-
static void tcp_v6_reqsk_destructor(struct request_sock *req)
{
kfree_skb(inet6_rsk(req)->pktopts);
struct tcp_sock *tp = tcp_sk(sk);
__u32 isn = TCP_SKB_CB(skb)->when;
struct dst_entry *dst = NULL;
-#ifdef CONFIG_SYN_COOKIES
int want_cookie = 0;
-#else
-#define want_cookie 0
-#endif
if (skb->protocol == htons(ETH_P_IP))
return tcp_v4_conn_request(sk, skb);
goto drop;
if (inet_csk_reqsk_queue_is_full(sk) && !isn) {
- if (net_ratelimit())
- syn_flood_warning(skb);
-#ifdef CONFIG_SYN_COOKIES
- if (sysctl_tcp_syncookies)
- want_cookie = 1;
- else
-#endif
- goto drop;
+ want_cookie = tcp_syn_flood_action(sk, skb, "TCPv6");
+ if (!want_cookie)
+ goto drop;
}
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
while (l-- > 0)
*c++ ^= *hash_location++;
-#ifdef CONFIG_SYN_COOKIES
want_cookie = 0; /* not our kind of cookie */
-#endif
tmp_ext.cookie_out_never = 0; /* false */
tmp_ext.cookie_plus = tmp_opt.cookie_plus;
} else if (!tp->rx_opt.cookie_in_always) {
newtp->af_specific = &tcp_sock_ipv6_mapped_specific;
#endif
+ newnp->ipv6_ac_list = NULL;
+ newnp->ipv6_fl_list = NULL;
newnp->pktoptions = NULL;
newnp->opt = NULL;
newnp->mcast_oif = inet6_iif(skb);
First: no IPv4 options.
*/
newinet->inet_opt = NULL;
+ newnp->ipv6_ac_list = NULL;
newnp->ipv6_fl_list = NULL;
/* Clone RX bits */
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(*opt);
- err = datagram_send_ctl(sock_net(sk), msg, &fl6, opt, &hlimit,
- &tclass, &dontfrag);
+ err = datagram_send_ctl(sock_net(sk), sk, msg, &fl6, opt,
+ &hlimit, &tclass, &dontfrag);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
extern int sysctl_fast_poll_increase;
extern char sysctl_devname[];
extern int sysctl_max_baud_rate;
-extern int sysctl_min_tx_turn_time;
-extern int sysctl_max_tx_data_size;
-extern int sysctl_max_tx_window;
+extern unsigned int sysctl_min_tx_turn_time;
+extern unsigned int sysctl_max_tx_data_size;
+extern unsigned int sysctl_max_tx_window;
extern int sysctl_max_noreply_time;
extern int sysctl_warn_noreply_time;
extern int sysctl_lap_keepalive_time;
* Default is 10us which means using the unmodified value given by the
* peer except if it's 0 (0 is likely a bug in the other stack).
*/
-unsigned sysctl_min_tx_turn_time = 10;
+unsigned int sysctl_min_tx_turn_time = 10;
/*
* Maximum data size to be used in transmission in payload of LAP frame.
* There is a bit of confusion in the IrDA spec :
* bytes frames or all negotiated frame sizes, but you can use the sysctl
* to play with this value anyway.
* Jean II */
-unsigned sysctl_max_tx_data_size = 2042;
+unsigned int sysctl_max_tx_data_size = 2042;
/*
* Maximum transmit window, i.e. number of LAP frames between turn-around.
* This allow to override what the peer told us. Some peers are buggy and
* don't always support what they tell us.
* Jean II */
-unsigned sysctl_max_tx_window = 7;
+unsigned int sysctl_max_tx_window = 7;
static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get);
static int irlap_param_link_disconnect(void *instance, irda_param_t *parm,
cancel_work_sync(&local->reconfig_filter);
ieee80211_clear_tx_pending(local);
- sta_info_stop(local);
rate_control_deinitialize(local);
if (skb_queue_len(&local->skb_queue) ||
destroy_workqueue(local->workqueue);
wiphy_unregister(local->hw.wiphy);
+ sta_info_stop(local);
ieee80211_wep_free(local);
ieee80211_led_exit(local);
kfree(local->int_scan_req);
BUG_ON(!sdata->bss);
atomic_dec(&sdata->bss->num_sta_ps);
- __sta_info_clear_tim_bit(sdata->bss, sta);
+ sta_info_clear_tim_bit(sta);
}
local->num_sta--;
break;
case PPTP_WAN_ERROR_NOTIFY:
+ case PPTP_SET_LINK_INFO:
case PPTP_ECHO_REQUEST:
case PPTP_ECHO_REPLY:
/* I don't have to explain these ;) */
if (opsize < 2) /* "silly options" */
return;
if (opsize > length)
- break; /* don't parse partial options */
+ return; /* don't parse partial options */
if (opcode == TCPOPT_SACK_PERM
&& opsize == TCPOLEN_SACK_PERM)
BUG_ON(ptr == NULL);
/* Fast path for timestamp-only option */
- if (length == TCPOLEN_TSTAMP_ALIGNED*4
+ if (length == TCPOLEN_TSTAMP_ALIGNED
&& *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
| (TCPOPT_NOP << 16)
| (TCPOPT_TIMESTAMP << 8)
if (opsize < 2) /* "silly options" */
return;
if (opsize > length)
- break; /* don't parse partial options */
+ return; /* don't parse partial options */
if (opcode == TCPOPT_SACK
&& opsize >= (TCPOLEN_SACK_BASE
return NULL;
vhdr = nla_data(nfqa[NFQA_VERDICT_HDR]);
- verdict = ntohl(vhdr->verdict);
- if ((verdict & NF_VERDICT_MASK) > NF_MAX_VERDICT)
+ verdict = ntohl(vhdr->verdict) & NF_VERDICT_MASK;
+ if (verdict > NF_MAX_VERDICT || verdict == NF_STOLEN)
return NULL;
return vhdr;
}
{
struct xt_rateest_match_info *info = par->matchinfo;
struct xt_rateest *est1, *est2;
- int ret = false;
+ int ret = -EINVAL;
if (hweight32(info->flags & (XT_RATEEST_MATCH_ABS |
XT_RATEEST_MATCH_REL)) != 1)
if (!est1)
goto err1;
+ est2 = NULL;
if (info->flags & XT_RATEEST_MATCH_REL) {
est2 = xt_rateest_lookup(info->name2);
if (!est2)
goto err2;
- } else
- est2 = NULL;
-
+ }
info->est1 = est1;
info->est2 = est2;
err2:
xt_rateest_put(est1);
err1:
- return -EINVAL;
+ return ret;
}
static void xt_rateest_mt_destroy(const struct xt_mtdtor_param *par)
return 0;
drop_n_acct:
- po->stats.tp_drops = atomic_inc_return(&sk->sk_drops);
+ spin_lock(&sk->sk_receive_queue.lock);
+ po->stats.tp_drops++;
+ atomic_inc(&sk->sk_drops);
+ spin_unlock(&sk->sk_receive_queue.lock);
drop_n_restore:
if (skb_head != skb->data && skb_shared(skb)) {
static void rds_iw_free_fastreg(struct rds_iw_mr_pool *pool, struct rds_iw_mr *ibmr);
static unsigned int rds_iw_unmap_fastreg_list(struct rds_iw_mr_pool *pool,
struct list_head *unmap_list,
- struct list_head *kill_list);
+ struct list_head *kill_list,
+ int *unpinned);
static void rds_iw_destroy_fastreg(struct rds_iw_mr_pool *pool, struct rds_iw_mr *ibmr);
static int rds_iw_get_device(struct rds_sock *rs, struct rds_iw_device **rds_iwdev, struct rdma_cm_id **cm_id)
LIST_HEAD(unmap_list);
LIST_HEAD(kill_list);
unsigned long flags;
- unsigned int nfreed = 0, ncleaned = 0, free_goal;
+ unsigned int nfreed = 0, ncleaned = 0, unpinned = 0, free_goal;
int ret = 0;
rds_iw_stats_inc(s_iw_rdma_mr_pool_flush);
* will be destroyed by the unmap function.
*/
if (!list_empty(&unmap_list)) {
- ncleaned = rds_iw_unmap_fastreg_list(pool, &unmap_list, &kill_list);
+ ncleaned = rds_iw_unmap_fastreg_list(pool, &unmap_list,
+ &kill_list, &unpinned);
/* If we've been asked to destroy all MRs, move those
* that were simply cleaned to the kill list */
if (free_all)
spin_unlock_irqrestore(&pool->list_lock, flags);
}
+ atomic_sub(unpinned, &pool->free_pinned);
atomic_sub(ncleaned, &pool->dirty_count);
atomic_sub(nfreed, &pool->item_count);
static unsigned int rds_iw_unmap_fastreg_list(struct rds_iw_mr_pool *pool,
struct list_head *unmap_list,
- struct list_head *kill_list)
+ struct list_head *kill_list,
+ int *unpinned)
{
struct rds_iw_mapping *mapping, *next;
unsigned int ncleaned = 0;
spin_lock_irqsave(&pool->list_lock, flags);
list_for_each_entry_safe(mapping, next, unmap_list, m_list) {
+ *unpinned += mapping->m_sg.len;
list_move(&mapping->m_list, &laundered);
ncleaned++;
}
skb2->skb_iif = skb->dev->ifindex;
skb2->dev = dev;
- dev_queue_xmit(skb2);
- err = 0;
+ err = dev_queue_xmit(skb2);
out:
if (err) {
struct rsvp_filter *f, **fp;
struct rsvp_session *s, **sp;
struct tc_rsvp_pinfo *pinfo = NULL;
- struct nlattr *opt = tca[TCA_OPTIONS-1];
+ struct nlattr *opt = tca[TCA_OPTIONS];
struct nlattr *tb[TCA_RSVP_MAX + 1];
struct tcf_exts e;
unsigned int h1, h2;
if (err < 0)
return err;
- err = tcf_exts_validate(tp, tb, tca[TCA_RATE-1], &e, &rsvp_ext_map);
+ err = tcf_exts_validate(tp, tb, tca[TCA_RATE], &e, &rsvp_ext_map);
if (err < 0)
return err;
if (f->handle != handle && handle)
goto errout2;
- if (tb[TCA_RSVP_CLASSID-1]) {
- f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID-1]);
+ if (tb[TCA_RSVP_CLASSID]) {
+ f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID]);
tcf_bind_filter(tp, &f->res, base);
}
err = -EINVAL;
if (handle)
goto errout2;
- if (tb[TCA_RSVP_DST-1] == NULL)
+ if (tb[TCA_RSVP_DST] == NULL)
goto errout2;
err = -ENOBUFS;
goto errout2;
h2 = 16;
- if (tb[TCA_RSVP_SRC-1]) {
- memcpy(f->src, nla_data(tb[TCA_RSVP_SRC-1]), sizeof(f->src));
+ if (tb[TCA_RSVP_SRC]) {
+ memcpy(f->src, nla_data(tb[TCA_RSVP_SRC]), sizeof(f->src));
h2 = hash_src(f->src);
}
- if (tb[TCA_RSVP_PINFO-1]) {
- pinfo = nla_data(tb[TCA_RSVP_PINFO-1]);
+ if (tb[TCA_RSVP_PINFO]) {
+ pinfo = nla_data(tb[TCA_RSVP_PINFO]);
f->spi = pinfo->spi;
f->tunnelhdr = pinfo->tunnelhdr;
}
- if (tb[TCA_RSVP_CLASSID-1])
- f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID-1]);
+ if (tb[TCA_RSVP_CLASSID])
+ f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID]);
- dst = nla_data(tb[TCA_RSVP_DST-1]);
+ dst = nla_data(tb[TCA_RSVP_DST]);
h1 = hash_dst(dst, pinfo ? pinfo->protocol : 0, pinfo ? pinfo->tunnelid : 0);
err = -ENOMEM;
return -1;
}
-static struct tcf_proto_ops RSVP_OPS = {
- .next = NULL,
+static struct tcf_proto_ops RSVP_OPS __read_mostly = {
.kind = RSVP_ID,
.classify = rsvp_classify,
.init = rsvp_init,
case SCTP_CMD_PURGE_ASCONF_QUEUE:
sctp_asconf_queue_teardown(asoc);
break;
+
+ case SCTP_CMD_SET_ASOC:
+ asoc = cmd->obj.asoc;
+ break;
+
default:
pr_warn("Impossible command: %u, %p\n",
cmd->verb, cmd->obj.ptr);
sctp_add_cmd_sf(commands, SCTP_CMD_NEW_ASOC, SCTP_ASOC(new_asoc));
sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
+ /* Restore association pointer to provide SCTP command interpeter
+ * with a valid context in case it needs to manipulate
+ * the queues */
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_ASOC,
+ SCTP_ASOC((struct sctp_association *)asoc));
+
return retval;
nomem:
* used_address->name_len is initialized to UINT_MAX so that the first
* destination address never matches.
*/
- if (used_address && used_address->name_len == msg_sys->msg_namelen &&
- !memcmp(&used_address->name, msg->msg_name,
+ if (used_address && msg_sys->msg_name &&
+ used_address->name_len == msg_sys->msg_namelen &&
+ !memcmp(&used_address->name, msg_sys->msg_name,
used_address->name_len)) {
err = sock_sendmsg_nosec(sock, msg_sys, total_len);
goto out_freectl;
*/
if (used_address && err >= 0) {
used_address->name_len = msg_sys->msg_namelen;
- memcpy(&used_address->name, msg->msg_name,
- used_address->name_len);
+ if (msg_sys->msg_name)
+ memcpy(&used_address->name, msg_sys->msg_name,
+ used_address->name_len);
}
out_freectl:
if (res)
goto out_rm_dev;
+ rtnl_lock();
+ rdev->wiphy.registered = true;
+ rtnl_unlock();
return 0;
out_rm_dev:
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+ rtnl_lock();
+ rdev->wiphy.registered = false;
+ rtnl_unlock();
+
rfkill_unregister(rdev->rfkill);
/* protect the device list */
if (len % sizeof(u32))
return -EINVAL;
+ if (settings->n_akm_suites > NL80211_MAX_NR_AKM_SUITES)
+ return -EINVAL;
+
memcpy(settings->akm_suites, data, len);
- for (i = 0; i < settings->n_ciphers_pairwise; i++)
+ for (i = 0; i < settings->n_akm_suites; i++)
if (!nl80211_valid_akm_suite(settings->akm_suites[i]))
return -EINVAL;
}
return;
}
+ chan->beacon_found = false;
chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags);
chan->max_antenna_gain = min(chan->orig_mag,
(int) MBI_TO_DBI(power_rule->max_antenna_gain));
i++, j++)
request->channels[i] =
&wdev->wiphy->bands[band]->channels[j];
+ request->rates[band] =
+ (1 << wdev->wiphy->bands[band]->n_bitrates) - 1;
}
}
request->n_channels = n_channels;
if (rdev->ops->suspend) {
rtnl_lock();
- ret = rdev->ops->suspend(&rdev->wiphy, rdev->wowlan);
+ if (rdev->wiphy.registered)
+ ret = rdev->ops->suspend(&rdev->wiphy, rdev->wowlan);
rtnl_unlock();
}
if (rdev->ops->resume) {
rtnl_lock();
- ret = rdev->ops->resume(&rdev->wiphy);
+ if (rdev->wiphy.registered)
+ ret = rdev->ops->resume(&rdev->wiphy);
rtnl_unlock();
}
/* only the first xfrm gets the encap type */
encap_type = 0;
+ if (async && x->repl->check(x, skb, seq)) {
+ XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR);
+ goto drop_unlock;
+ }
+
x->repl->advance(x, seq);
x->curlft.bytes += skb->len;
BUG();
}
xdst = dst_alloc(dst_ops, NULL, 0, 0, 0);
- memset(&xdst->u.rt6.rt6i_table, 0, sizeof(*xdst) - sizeof(struct dst_entry));
- xfrm_policy_put_afinfo(afinfo);
- if (likely(xdst))
+ if (likely(xdst)) {
+ memset(&xdst->u.rt6.rt6i_table, 0,
+ sizeof(*xdst) - sizeof(struct dst_entry));
xdst->flo.ops = &xfrm_bundle_fc_ops;
- else
+ } else
xdst = ERR_PTR(-ENOBUFS);
+ xfrm_policy_put_afinfo(afinfo);
+
return xdst;
}
} else {
$cast = $cast2;
}
- WARN("$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . $herecurr);
+ WARN("MINMAX",
+ "$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . $herecurr);
}
}
warn("$P: No supported VCS found. Add --nogit to options?\n");
warn("Using a git repository produces better results.\n");
warn("Try Linus Torvalds' latest git repository using:\n");
- warn("git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git\n");
+ warn("git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git\n");
$printed_novcs = 1;
}
return 0;
snd_pcm_uframes_t avail = 0;
long wait_time, tout;
+ init_waitqueue_entry(&wait, current);
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&runtime->tsleep, &wait);
+
if (runtime->no_period_wakeup)
wait_time = MAX_SCHEDULE_TIMEOUT;
else {
}
wait_time = msecs_to_jiffies(wait_time * 1000);
}
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&runtime->tsleep, &wait);
+
for (;;) {
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
}
+
+ /*
+ * We need to check if space became available already
+ * (and thus the wakeup happened already) first to close
+ * the race of space already having become available.
+ * This check must happen after been added to the waitqueue
+ * and having current state be INTERRUPTIBLE.
+ */
+ if (is_playback)
+ avail = snd_pcm_playback_avail(runtime);
+ else
+ avail = snd_pcm_capture_avail(runtime);
+ if (avail >= runtime->twake)
+ break;
snd_pcm_stream_unlock_irq(substream);
- tout = schedule_timeout_interruptible(wait_time);
+
+ tout = schedule_timeout(wait_time);
+
snd_pcm_stream_lock_irq(substream);
+ set_current_state(TASK_INTERRUPTIBLE);
switch (runtime->status->state) {
case SNDRV_PCM_STATE_SUSPENDED:
err = -ESTRPIPE;
err = -EIO;
break;
}
- if (is_playback)
- avail = snd_pcm_playback_avail(runtime);
- else
- avail = snd_pcm_capture_avail(runtime);
- if (avail >= runtime->twake)
- break;
}
_endloop:
+ set_current_state(TASK_RUNNING);
remove_wait_queue(&runtime->tsleep, &wait);
*availp = avail;
return err;
module_param_array(tea575x_tuner, int, NULL, 0444);
MODULE_PARM_DESC(tea575x_tuner, "TEA575x tuner access method (0 = auto, 1 = SF256-PCS, 2=SF256-PCP, 3=SF64-PCR, 8=disable, +16=tuner-only).");
+#define TUNER_DISABLED (1<<3)
#define TUNER_ONLY (1<<4)
#define TUNER_TYPE_MASK (~TUNER_ONLY & 0xFFFF)
__end_hw:
#ifdef CONFIG_SND_FM801_TEA575X_BOOL
- snd_tea575x_exit(&chip->tea);
+ if (!(chip->tea575x_tuner & TUNER_DISABLED))
+ snd_tea575x_exit(&chip->tea);
#endif
if (chip->irq >= 0)
free_irq(chip->irq, chip);
(tea575x_tuner & TUNER_TYPE_MASK) < 4) {
if (snd_tea575x_init(&chip->tea)) {
snd_printk(KERN_ERR "TEA575x radio not found\n");
- snd_fm801_free(chip);
return -ENODEV;
}
} else if ((tea575x_tuner & TUNER_TYPE_MASK) == 0) {
}
if (tea575x_tuner == 4) {
snd_printk(KERN_ERR "TEA575x radio not found\n");
- snd_fm801_free(chip);
- return -ENODEV;
+ chip->tea575x_tuner = TUNER_DISABLED;
}
}
- strlcpy(chip->tea.card, snd_fm801_tea575x_gpios[(tea575x_tuner & TUNER_TYPE_MASK) - 1].name, sizeof(chip->tea.card));
+ if (!(chip->tea575x_tuner & TUNER_DISABLED)) {
+ strlcpy(chip->tea.card,
+ snd_fm801_tea575x_gpios[(tea575x_tuner &
+ TUNER_TYPE_MASK) - 1].name,
+ sizeof(chip->tea.card));
+ }
#endif
*rchip = chip;
return -1;
}
recursive++;
- for (i = 0; i < nums; i++)
+ for (i = 0; i < nums; i++) {
+ unsigned int type = get_wcaps_type(get_wcaps(codec, conn[i]));
+ if (type == AC_WID_PIN || type == AC_WID_AUD_OUT)
+ continue;
if (snd_hda_get_conn_index(codec, conn[i], nid, recursive) >= 0)
return i;
+ }
return -1;
}
EXPORT_SYMBOL_HDA(snd_hda_get_conn_index);
}
static unsigned int azx_get_position(struct azx *chip,
- struct azx_dev *azx_dev)
+ struct azx_dev *azx_dev,
+ bool with_check)
{
unsigned int pos;
int stream = azx_dev->substream->stream;
default:
/* use the position buffer */
pos = le32_to_cpu(*azx_dev->posbuf);
- if (chip->position_fix[stream] == POS_FIX_AUTO) {
+ if (with_check && chip->position_fix[stream] == POS_FIX_AUTO) {
if (!pos || pos == (u32)-1) {
printk(KERN_WARNING
"hda-intel: Invalid position buffer, "
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev = get_azx_dev(substream);
return bytes_to_frames(substream->runtime,
- azx_get_position(chip, azx_dev));
+ azx_get_position(chip, azx_dev, false));
}
/*
return -1; /* bogus (too early) interrupt */
stream = azx_dev->substream->stream;
- pos = azx_get_position(chip, azx_dev);
+ pos = azx_get_position(chip, azx_dev, true);
if (WARN_ONCE(!azx_dev->period_bytes,
"hda-intel: zero azx_dev->period_bytes"))
int index, unsigned int pval, int dir,
struct snd_kcontrol **kctlp)
{
- char tmp[32];
+ char tmp[44];
struct snd_kcontrol_new knew =
HDA_CODEC_VOLUME_IDX(tmp, index, 0, 0, HDA_OUTPUT);
knew.private_value = pval;
#define MAX_AUTO_DACS 5
+#define DAC_SLAVE_FLAG 0x8000 /* filled dac is a slave */
+
/* fill analog DAC list from the widget tree */
static int fill_cx_auto_dacs(struct hda_codec *codec, hda_nid_t *dacs)
{
/* fill pin_dac_pair list from the pin and dac list */
static int fill_dacs_for_pins(struct hda_codec *codec, hda_nid_t *pins,
int num_pins, hda_nid_t *dacs, int *rest,
- struct pin_dac_pair *filled, int type)
+ struct pin_dac_pair *filled, int nums,
+ int type)
{
- int i, nums;
+ int i, start = nums;
- nums = 0;
- for (i = 0; i < num_pins; i++) {
+ for (i = 0; i < num_pins; i++, nums++) {
filled[nums].pin = pins[i];
filled[nums].type = type;
filled[nums].dac = get_unassigned_dac(codec, pins[i], dacs, rest);
- nums++;
+ if (filled[nums].dac)
+ continue;
+ if (filled[start].dac && get_connection_index(codec, pins[i], filled[start].dac) >= 0) {
+ filled[nums].dac = filled[start].dac | DAC_SLAVE_FLAG;
+ continue;
+ }
+ if (filled[0].dac && get_connection_index(codec, pins[i], filled[0].dac) >= 0) {
+ filled[nums].dac = filled[0].dac | DAC_SLAVE_FLAG;
+ continue;
+ }
+ snd_printdd("Failed to find a DAC for pin 0x%x", pins[i]);
}
return nums;
}
rest = fill_cx_auto_dacs(codec, dacs);
/* parse all analog output pins */
nums = fill_dacs_for_pins(codec, cfg->line_out_pins, cfg->line_outs,
- dacs, &rest, spec->dac_info,
- AUTO_PIN_LINE_OUT);
- nums += fill_dacs_for_pins(codec, cfg->hp_pins, cfg->hp_outs,
- dacs, &rest, spec->dac_info + nums,
- AUTO_PIN_HP_OUT);
- nums += fill_dacs_for_pins(codec, cfg->speaker_pins, cfg->speaker_outs,
- dacs, &rest, spec->dac_info + nums,
- AUTO_PIN_SPEAKER_OUT);
+ dacs, &rest, spec->dac_info, 0,
+ AUTO_PIN_LINE_OUT);
+ nums = fill_dacs_for_pins(codec, cfg->hp_pins, cfg->hp_outs,
+ dacs, &rest, spec->dac_info, nums,
+ AUTO_PIN_HP_OUT);
+ nums = fill_dacs_for_pins(codec, cfg->speaker_pins, cfg->speaker_outs,
+ dacs, &rest, spec->dac_info, nums,
+ AUTO_PIN_SPEAKER_OUT);
spec->dac_info_filled = nums;
/* fill multiout struct */
for (i = 0; i < nums; i++) {
hda_nid_t dac = spec->dac_info[i].dac;
- if (!dac)
+ if (!dac || (dac & DAC_SLAVE_FLAG))
continue;
switch (spec->dac_info[i].type) {
case AUTO_PIN_LINE_OUT:
}
if (imux->num_items >= 2 && cfg->num_inputs == imux->num_items)
cx_auto_check_auto_mic(codec);
- if (imux->num_items > 1 && !spec->auto_mic) {
+ if (imux->num_items > 1) {
for (i = 1; i < imux->num_items; i++) {
if (spec->imux_info[i].adc != spec->imux_info[0].adc) {
spec->adc_switching = 1;
nid = spec->dac_info[i].dac;
if (!nid)
nid = spec->multiout.dac_nids[0];
+ else if (nid & DAC_SLAVE_FLAG)
+ nid &= ~DAC_SLAVE_FLAG;
select_connection(codec, spec->dac_info[i].pin, nid);
}
if (spec->auto_mute) {
hda_nid_t pin, const char *name, int idx)
{
unsigned int caps;
- caps = query_amp_caps(codec, dac, HDA_OUTPUT);
- if (caps & AC_AMPCAP_NUM_STEPS)
- return cx_auto_add_pb_volume(codec, dac, name, idx);
+ if (dac && !(dac & DAC_SLAVE_FLAG)) {
+ caps = query_amp_caps(codec, dac, HDA_OUTPUT);
+ if (caps & AC_AMPCAP_NUM_STEPS)
+ return cx_auto_add_pb_volume(codec, dac, name, idx);
+ }
caps = query_amp_caps(codec, pin, HDA_OUTPUT);
if (caps & AC_AMPCAP_NUM_STEPS)
return cx_auto_add_pb_volume(codec, pin, name, idx);
for (i = 0; i < spec->dac_info_filled; i++) {
const char *label;
int idx, type;
- if (!spec->dac_info[i].dac)
- continue;
+ hda_nid_t dac = spec->dac_info[i].dac;
type = spec->dac_info[i].type;
if (type == AUTO_PIN_LINE_OUT)
type = spec->autocfg.line_out_type;
idx = num_spk++;
break;
}
- err = try_add_pb_volume(codec, spec->dac_info[i].dac,
+ err = try_add_pb_volume(codec, dac,
spec->dac_info[i].pin,
label, idx);
if (err < 0)
unsigned int auto_mic_valid_imux:1; /* valid imux for auto-mic */
unsigned int automute:1; /* HP automute enabled */
unsigned int detect_line:1; /* Line-out detection enabled */
- unsigned int automute_lines:1; /* automute line-out as well */
+ unsigned int automute_lines:1; /* automute line-out as well; NOP when automute_hp_lo isn't set */
unsigned int automute_hp_lo:1; /* both HP and LO available */
/* other flags */
if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0] ||
spec->autocfg.line_out_pins[0] == spec->autocfg.speaker_pins[0])
return;
- if (!spec->automute_lines || !spec->automute)
+ if (!spec->automute || (spec->automute_hp_lo && !spec->automute_lines))
on = 0;
else
on = spec->jack_present;
{
struct alc_spec *spec = codec->spec;
- if (!spec->automute)
- return;
spec->jack_present =
detect_jacks(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
spec->autocfg.hp_pins);
+ if (!spec->automute)
+ return;
update_speakers(codec);
}
{
struct alc_spec *spec = codec->spec;
- if (!spec->automute || !spec->detect_line)
+ /* check LO jack only when it's different from HP */
+ if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0])
return;
+
spec->line_jack_present =
detect_jacks(codec, ARRAY_SIZE(spec->autocfg.line_out_pins),
spec->autocfg.line_out_pins);
+ if (!spec->automute || !spec->detect_line)
+ return;
update_speakers(codec);
}
unsigned int val;
if (!spec->automute)
val = 0;
- else if (!spec->automute_lines)
+ else if (!spec->automute_hp_lo || !spec->automute_lines)
val = 1;
else
val = 2;
spec->automute = 0;
break;
case 1:
- if (spec->automute && !spec->automute_lines)
+ if (spec->automute &&
+ (!spec->automute_hp_lo || !spec->automute_lines))
return 0;
spec->automute = 1;
spec->automute_lines = 0;
* 15 : 1 --> enable the function "Mute internal speaker
* when the external headphone out jack is plugged"
*/
- if (!spec->autocfg.hp_pins[0]) {
+ if (!spec->autocfg.hp_pins[0] &&
+ !(spec->autocfg.line_out_pins[0] &&
+ spec->autocfg.line_out_type == AUTO_PIN_HP_OUT)) {
hda_nid_t nid;
tmp = (ass >> 11) & 0x3; /* HP to chassis */
if (tmp == 0)
static void alc_auto_init_extra_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- hda_nid_t pin;
+ hda_nid_t pin, dac;
pin = spec->autocfg.hp_pins[0];
- if (pin)
- alc_auto_set_output_and_unmute(codec, pin, PIN_HP,
- spec->multiout.hp_nid);
+ if (pin) {
+ dac = spec->multiout.hp_nid;
+ if (!dac)
+ dac = spec->multiout.dac_nids[0];
+ alc_auto_set_output_and_unmute(codec, pin, PIN_HP, dac);
+ }
pin = spec->autocfg.speaker_pins[0];
- if (pin)
- alc_auto_set_output_and_unmute(codec, pin, PIN_OUT,
- spec->multiout.extra_out_nid[0]);
+ if (pin) {
+ dac = spec->multiout.extra_out_nid[0];
+ if (!dac)
+ dac = spec->multiout.dac_nids[0];
+ alc_auto_set_output_and_unmute(codec, pin, PIN_OUT, dac);
+ }
}
/*
switch (codec->vendor_id) {
case 0x111d76d1:
case 0x111d76d9:
+ case 0x111d76df:
case 0x111d76e5:
case 0x111d7666:
case 0x111d7667:
{ .id = 0x111d76cc, .name = "92HD89F3", .patch = patch_stac92hd73xx },
{ .id = 0x111d76cd, .name = "92HD89F2", .patch = patch_stac92hd73xx },
{ .id = 0x111d76ce, .name = "92HD89F1", .patch = patch_stac92hd73xx },
+ { .id = 0x111d76df, .name = "92HD93BXX", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76e0, .name = "92HD91BXX", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76e3, .name = "92HD98BXX", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76e5, .name = "92HD99BXX", .patch = patch_stac92hd83xxx},
switch (params_rate(params)) {
case 48000:
- clk = 12288000;
+ clk = 24576000;
break;
}
.cpu_dai_name = "bfin-tdm.0",
.codec_dai_name ="ad193x-hifi",
.platform_name = "bfin-tdm-pcm-audio",
- .codec_name = "ad193x.5",
+ .codec_name = "spi0.5",
.ops = &bf5xx_ad193x_ops,
},
{
.cpu_dai_name = "bfin-tdm.1",
.codec_dai_name ="ad193x-hifi",
.platform_name = "bfin-tdm-pcm-audio",
- .codec_name = "ad193x.5",
+ .codec_name = "spi0.5",
.ops = &bf5xx_ad193x_ops,
},
};
return 0;
}
-static int bf5xx_probe(struct platform_device *pdev)
+static int bf5xx_probe(struct snd_soc_card *card)
{
int err;
if (gpio_request(GPIO_SE, "AD73311_SE")) {
int sysclk;
};
-/* ad193x register cache & default register settings */
-static const u8 ad193x_reg[AD193X_NUM_REGS] = {
- 0, 0, 0, 0, 0, 0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0, 0, 0,
-};
-
/*
* AD193X volume/mute/de-emphasis etc. controls
*/
snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, reg);
reg = snd_soc_read(codec, AD193X_DAC_CTRL2);
- reg = (reg & (~AD193X_DAC_WORD_LEN_MASK)) | word_len;
+ reg = (reg & (~AD193X_DAC_WORD_LEN_MASK))
+ | (word_len << AD193X_DAC_WORD_LEN_SHFT);
snd_soc_write(codec, AD193X_DAC_CTRL2, reg);
reg = snd_soc_read(codec, AD193X_ADC_CTRL1);
static struct snd_soc_codec_driver soc_codec_dev_ad193x = {
.probe = ad193x_probe,
- .reg_cache_default = ad193x_reg,
- .reg_cache_size = AD193X_NUM_REGS,
- .reg_word_size = sizeof(u16),
};
#if defined(CONFIG_SPI_MASTER)
#define AD193X_DAC_LEFT_HIGH (1 << 3)
#define AD193X_DAC_BCLK_INV (1 << 7)
#define AD193X_DAC_CTRL2 0x804
-#define AD193X_DAC_WORD_LEN_MASK 0xC
+#define AD193X_DAC_WORD_LEN_SHFT 3
+#define AD193X_DAC_WORD_LEN_MASK 0x18
#define AD193X_DAC_MASTER_MUTE 1
#define AD193X_DAC_CHNL_MUTE 0x805
#define AD193X_DACL1_MUTE 0
#define AD193X_ADC_CTRL1 0x80f
#define AD193X_ADC_SERFMT_MASK 0x60
#define AD193X_ADC_SERFMT_STEREO (0 << 5)
-#define AD193X_ADC_SERFMT_TDM (1 << 2)
+#define AD193X_ADC_SERFMT_TDM (1 << 5)
#define AD193X_ADC_SERFMT_AUX (2 << 5)
#define AD193X_ADC_WORD_LEN_MASK 0x3
#define AD193X_ADC_CTRL2 0x810
static int ssm2602_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 reg = snd_soc_read(codec, SSM2602_PWR) & 0xff7f;
+ u16 reg = snd_soc_read(codec, SSM2602_PWR);
+ reg &= ~(PWR_POWER_OFF | PWR_OSC_PDN);
switch (level) {
case SND_SOC_BIAS_ON:
ret = snd_soc_register_codec(&i2c->dev, &sta32x_codec, &sta32x_dai, 1);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to register codec (%d)\n", ret);
+ kfree(sta32x);
return ret;
}
/* set the update bits */
snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
- snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
- snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_LADC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_RADC, 0x0100, 0x0100);
snd_soc_update_bits(codec, WM8753_LOUT1V, 0x0100, 0x0100);
snd_soc_update_bits(codec, WM8753_ROUT1V, 0x0100, 0x0100);
snd_soc_update_bits(codec, WM8753_LOUT2V, 0x0100, 0x0100);
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
if (fll) {
+ try_wait_for_completion(&wm8962->fll_lock);
+
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
WM8962_FLL_ENA, WM8962_FLL_ENA);
if (wm8962->irq) {
WM8962_BIAS_ENA | 0x180);
msleep(5);
-
- snd_soc_update_bits(codec, WM8962_CLOCKING2,
- WM8962_CLKREG_OVD,
- WM8962_CLKREG_OVD);
}
/* VMID 2*250k */
snd_soc_write(codec, WM8962_FLL_CONTROL_7, fll_div.lambda);
snd_soc_write(codec, WM8962_FLL_CONTROL_8, fll_div.n);
+ try_wait_for_completion(&wm8962->fll_lock);
+
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
WM8962_FLL_FRAC | WM8962_FLL_REFCLK_SRC_MASK |
WM8962_FLL_ENA, fll1);
}
EXPORT_SYMBOL_GPL(wm8962_mic_detect);
-#ifdef CONFIG_PM
-static int wm8962_resume(struct snd_soc_codec *codec)
-{
- u16 *reg_cache = codec->reg_cache;
- int i;
-
- /* Restore the registers */
- for (i = 1; i < codec->driver->reg_cache_size; i++) {
- switch (i) {
- case WM8962_SOFTWARE_RESET:
- continue;
- default:
- break;
- }
-
- if (reg_cache[i] != wm8962_reg[i])
- snd_soc_write(codec, i, reg_cache[i]);
- }
-
- return 0;
-}
-#else
-#define wm8962_resume NULL
-#endif
-
#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
static int beep_rates[] = {
500, 1000, 2000, 4000,
*/
snd_soc_update_bits(codec, WM8962_CLOCKING2, WM8962_SYSCLK_ENA, 0);
+ /* Ensure we have soft control over all registers */
+ snd_soc_update_bits(codec, WM8962_CLOCKING2,
+ WM8962_CLKREG_OVD, WM8962_CLKREG_OVD);
+
regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
if (pdata) {
static struct snd_soc_codec_driver soc_codec_dev_wm8962 = {
.probe = wm8962_probe,
.remove = wm8962_remove,
- .resume = wm8962_resume,
.set_bias_level = wm8962_set_bias_level,
.reg_cache_size = WM8962_MAX_REGISTER + 1,
.reg_word_size = sizeof(u16),
};
static const struct soc_enum sidetone_hpf =
- SOC_ENUM_SINGLE(WM8996_SIDETONE, 7, 6, sidetone_hpf_text);
+ SOC_ENUM_SINGLE(WM8996_SIDETONE, 7, 7, sidetone_hpf_text);
static const char *hpf_mode_text[] = {
"HiFi", "Custom", "Voice"
SND_SOC_DAPM_PGA("IN1L PGA", WM8996_POWER_MANAGEMENT_2, 5, 0, NULL, 0),
SND_SOC_DAPM_PGA("IN1R PGA", WM8996_POWER_MANAGEMENT_2, 4, 0, NULL, 0),
-SND_SOC_DAPM_MUX("IN1L Mux", SND_SOC_NOPM, 0, 0, &in1_mux),
-SND_SOC_DAPM_MUX("IN1R Mux", SND_SOC_NOPM, 0, 0, &in1_mux),
-SND_SOC_DAPM_MUX("IN2L Mux", SND_SOC_NOPM, 0, 0, &in2_mux),
-SND_SOC_DAPM_MUX("IN2R Mux", SND_SOC_NOPM, 0, 0, &in2_mux),
-
-SND_SOC_DAPM_PGA("IN1L", WM8996_POWER_MANAGEMENT_7, 2, 0, NULL, 0),
-SND_SOC_DAPM_PGA("IN1R", WM8996_POWER_MANAGEMENT_7, 3, 0, NULL, 0),
-SND_SOC_DAPM_PGA("IN2L", WM8996_POWER_MANAGEMENT_7, 6, 0, NULL, 0),
-SND_SOC_DAPM_PGA("IN2R", WM8996_POWER_MANAGEMENT_7, 7, 0, NULL, 0),
+SND_SOC_DAPM_MUX("IN1L Mux", WM8996_POWER_MANAGEMENT_7, 2, 0, &in1_mux),
+SND_SOC_DAPM_MUX("IN1R Mux", WM8996_POWER_MANAGEMENT_7, 3, 0, &in1_mux),
+SND_SOC_DAPM_MUX("IN2L Mux", WM8996_POWER_MANAGEMENT_7, 6, 0, &in2_mux),
+SND_SOC_DAPM_MUX("IN2R Mux", WM8996_POWER_MANAGEMENT_7, 7, 0, &in2_mux),
SND_SOC_DAPM_SUPPLY("DMIC2", WM8996_POWER_MANAGEMENT_7, 9, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("DMIC1", WM8996_POWER_MANAGEMENT_7, 8, 0, NULL, 0),
{ "AIF2RX0", NULL, "AIFCLK" },
{ "AIF2RX1", NULL, "AIFCLK" },
+ { "AIF1TX0", NULL, "AIFCLK" },
+ { "AIF1TX1", NULL, "AIFCLK" },
+ { "AIF1TX2", NULL, "AIFCLK" },
+ { "AIF1TX3", NULL, "AIFCLK" },
+ { "AIF1TX4", NULL, "AIFCLK" },
+ { "AIF1TX5", NULL, "AIFCLK" },
+
+ { "AIF2TX0", NULL, "AIFCLK" },
+ { "AIF2TX1", NULL, "AIFCLK" },
+
{ "DSP1RXL", NULL, "SYSDSPCLK" },
{ "DSP1RXR", NULL, "SYSDSPCLK" },
{ "DSP2RXL", NULL, "SYSDSPCLK" },
snd_soc_write(codec, WM8996_FLL_EFS_1, fll_div.lambda);
+ /* Clear any pending completions (eg, from failed startups) */
+ try_wait_for_completion(&wm8996->fll_lock);
+
snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1,
WM8996_FLL_ENA, WM8996_FLL_ENA);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
err = -ENODEV;
- goto fail;
+ goto fail_free_info;
}
info->mem = request_mem_region(res->start, resource_size(res),
pdev->name);
if (!info->mem) {
err = -EBUSY;
- goto fail;
+ goto fail_free_info;
}
info->regs = ioremap(info->mem->start, resource_size(info->mem));
iounmap(info->regs);
fail_release_mem:
release_mem_region(info->mem->start, resource_size(info->mem));
+fail_free_info:
kfree(info);
fail:
return err;
* assume that device_node pointers are a valid comparison.
*/
np = of_parse_phandle(ssi_np, "fsl,playback-dma", 0);
+ of_node_put(np);
if (np == dma_channel_np)
return ssi_np;
np = of_parse_phandle(ssi_np, "fsl,capture-dma", 0);
+ of_node_put(np);
if (np == dma_channel_np)
return ssi_np;
}
.pcm_free = &psc_dma_free,
};
-static int mpc5200_hpcd_probe(struct of_device *op)
+static int mpc5200_hpcd_probe(struct platform_device *op)
{
phys_addr_t fifo;
struct psc_dma *psc_dma;
return ret;
}
-static int mpc5200_hpcd_remove(struct of_device *op)
+static int mpc5200_hpcd_remove(struct platform_device *op)
{
struct psc_dma *psc_dma = dev_get_drvdata(&op->dev);
static struct platform_driver mpc5200_hpcd_of_driver = {
.probe = mpc5200_hpcd_probe,
.remove = mpc5200_hpcd_remove,
- .dev = {
+ .driver = {
.owner = THIS_MODULE,
.name = "mpc5200-pcm-audio",
.of_match_table = mpc5200_hpcd_match,
}
machine_data = kzalloc(sizeof(struct mpc8610_hpcd_data), GFP_KERNEL);
- if (!machine_data)
- return -ENOMEM;
+ if (!machine_data) {
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
machine_data->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev);
machine_data->dai[0].ops = &mpc8610_hpcd_ops;
ret = platform_device_add(sound_device);
if (ret) {
dev_err(&pdev->dev, "platform device add failed\n");
- goto error;
+ goto error_sound;
}
dev_set_drvdata(&pdev->dev, sound_device);
return 0;
+error_sound:
+ platform_device_unregister(sound_device);
error:
- of_node_put(codec_np);
-
- if (sound_device)
- platform_device_unregister(sound_device);
-
kfree(machine_data);
-
+error_alloc:
+ of_node_put(codec_np);
return ret;
}
* dai->platform name should already point to an allocated buffer.
*/
ret = of_address_to_resource(dma_channel_np, 0, &res);
- if (ret)
+ if (ret) {
+ of_node_put(dma_channel_np);
return ret;
+ }
snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s",
(unsigned long long) res.start, dma_channel_np->name);
static int imx_pcm_fiq_new(struct snd_soc_pcm_runtime *rtd)
{
- struct snd_card *card = rtd->card->snd_card;
struct snd_soc_dai *dai = rtd->cpu_dai;
struct snd_pcm *pcm = rtd->pcm;
int ret;
if (!priv->mem) {
dev_err(&pdev->dev, "request_mem_region failed\n");
err = -EBUSY;
- goto error;
+ goto err_alloc;
}
priv->io = ioremap(priv->mem->start, SZ_16K);
}
/* Set codec bias level */
- ams_delta_set_bias_level(card, SND_SOC_BIAS_STANDBY);
+ ams_delta_set_bias_level(card, dapm, SND_SOC_BIAS_STANDBY);
/* Add hook switch - can be used to control the codec from userspace
* even if line discipline fails */
ams_delta_hook_switch_gpios);
/* Keep modem power on */
- ams_delta_set_bias_level(&ams_delta_audio_card, SND_SOC_BIAS_STANDBY);
+ ams_delta_set_bias_level(&ams_delta_audio_card,
+ &ams_delta_audio_card.rtd[0].codec->dapm,
+ SND_SOC_BIAS_STANDBY);
platform_device_unregister(cx20442_platform_device);
platform_device_unregister(ams_delta_audio_platform_device);
return ret;
}
-int __devexit omap_mcpdm_remove(struct platform_device *pdev)
+int omap_mcpdm_remove(struct platform_device *pdev)
{
struct omap_mcpdm *mcpdm_ptr = platform_get_drvdata(pdev);
extern void omap_mcpdm_free(void);
extern int omap_mcpdm_set_offset(int offset1, int offset2);
int __devinit omap_mcpdm_probe(struct platform_device *pdev);
-int __devexit omap_mcpdm_remove(struct platform_device *pdev);
+int omap_mcpdm_remove(struct platform_device *pdev);
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
int err = 0;
+ if (mcbsp_data->active)
+ if (freq == mcbsp_data->in_freq)
+ return 0;
+ else
+ return -EBUSY;
+
/* The McBSP signal muxing functions are only available on McBSP1 */
if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR ||
clk_id == OMAP_MCBSP_CLKR_SRC_CLKX ||
if (clk_pout) {
pout = clk_get(NULL, "CLK_POUT");
if (IS_ERR(pout)) {
- dev_err(&pdev->dev, "Unable to obtain CLK_POUT: %ld\n",
+ dev_err(card->dev, "Unable to obtain CLK_POUT: %ld\n",
PTR_ERR(pout));
return PTR_ERR(pout);
}
ret = clk_enable(pout);
if (ret != 0) {
- dev_err(&pdev->dev, "Unable to enable CLK_POUT: %d\n",
+ dev_err(card->dev, "Unable to enable CLK_POUT: %d\n",
ret);
clk_put(pout);
return ret;
}
- dev_dbg(&pdev->dev, "MCLK enabled at %luHz\n",
+ dev_dbg(card->dev, "MCLK enabled at %luHz\n",
clk_get_rate(pout));
}
if (clk_pout) {
ret = clk_enable(pout);
if (ret != 0)
- dev_err(&pdev->dev, "Unable to enable CLK_POUT: %d\n",
+ dev_err(card->dev, "Unable to enable CLK_POUT: %d\n",
ret);
}
select SND_SAMSUNG_I2S
select SND_SOC_WM8996
select SND_SOC_WM9081
+ select SND_SOC_WM1250_EV1
config SND_SOC_SPEYSIDE_WM8962
tristate "Audio support for Wolfson Speyside with WM8962"
*
*/
+#include <linux/types.h>
#include <linux/gpio.h>
#include <sound/soc.h>
*
*/
+#include <linux/types.h>
#include <linux/gpio.h>
#include <sound/soc.h>
struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
int ret;
+ if (dapm->dev != codec_dai->dev)
+ return 0;
+
switch (level) {
case SND_SOC_BIAS_PREPARE:
if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
int ret;
+ if (dapm->dev != codec_dai->dev)
+ return 0;
+
switch (level) {
case SND_SOC_BIAS_STANDBY:
ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK,
rbnode = rb_entry(node, struct snd_soc_rbtree_node, node);
for (i = 0; i < rbnode->blklen; ++i) {
regtmp = rbnode->base_reg + i;
- WARN_ON(codec->writable_register &&
- codec->writable_register(codec, regtmp));
val = snd_soc_rbtree_get_register(rbnode, i);
def = snd_soc_get_cache_val(codec->reg_def_copy, i,
rbnode->word_size);
if (val == def)
continue;
+ WARN_ON(!snd_soc_codec_writable_register(codec, regtmp));
+
codec->cache_bypass = 1;
ret = snd_soc_write(codec, regtmp, val);
codec->cache_bypass = 0;
lzo_blocks = codec->reg_cache;
for_each_set_bit(i, lzo_blocks[0]->sync_bmp, lzo_blocks[0]->sync_bmp_nbits) {
- WARN_ON(codec->writable_register &&
- codec->writable_register(codec, i));
+ WARN_ON(!snd_soc_codec_writable_register(codec, i));
ret = snd_soc_cache_read(codec, i, &val);
if (ret)
return ret;
codec_drv = codec->driver;
for (i = 0; i < codec_drv->reg_cache_size; ++i) {
- WARN_ON(codec->writable_register &&
- codec->writable_register(codec, i));
ret = snd_soc_cache_read(codec, i, &val);
if (ret)
return ret;
if (snd_soc_get_cache_val(codec->reg_def_copy,
i, codec_drv->reg_word_size) == val)
continue;
+
+ WARN_ON(!snd_soc_codec_writable_register(codec, i));
+
ret = snd_soc_write(codec, i, val);
if (ret)
return ret;
#include <linux/bitops.h>
#include <linux/debugfs.h>
#include <linux/platform_device.h>
+#include <linux/ctype.h>
#include <linux/slab.h>
#include <sound/ac97_codec.h>
#include <sound/core.h>
"%s", card->name);
snprintf(card->snd_card->longname, sizeof(card->snd_card->longname),
"%s", card->long_name ? card->long_name : card->name);
- if (card->driver_name)
- strlcpy(card->snd_card->driver, card->driver_name,
- sizeof(card->snd_card->driver));
+ snprintf(card->snd_card->driver, sizeof(card->snd_card->driver),
+ "%s", card->driver_name ? card->driver_name : card->name);
+ for (i = 0; i < ARRAY_SIZE(card->snd_card->driver); i++) {
+ switch (card->snd_card->driver[i]) {
+ case '_':
+ case '-':
+ case '\0':
+ break;
+ default:
+ if (!isalnum(card->snd_card->driver[i]))
+ card->snd_card->driver[i] = '_';
+ break;
+ }
+ }
if (card->late_probe) {
ret = card->late_probe(card);
if (codec->readable_register)
return codec->readable_register(codec, reg);
else
- return 0;
+ return 1;
}
EXPORT_SYMBOL_GPL(snd_soc_codec_readable_register);
if (codec->writable_register)
return codec->writable_register(codec, reg);
else
- return 0;
+ return 1;
}
EXPORT_SYMBOL_GPL(snd_soc_codec_writable_register);
if (prefix) {
name_len = strlen(long_name) + strlen(prefix) + 2;
- name = kmalloc(name_len, GFP_ATOMIC);
+ name = kmalloc(name_len, GFP_KERNEL);
if (!name)
return NULL;
/**
* snd_soc_dapm_free - free dapm resources
- * @card: SoC device
+ * @dapm: DAPM context
*
* Free all dapm widgets and resources.
*/
#define snd_soc_16_8_read_i2c NULL
#endif
+#if defined(CONFIG_SPI_MASTER)
+static unsigned int snd_soc_16_8_read_spi(struct snd_soc_codec *codec,
+ unsigned int r)
+{
+ struct spi_device *spi = codec->control_data;
+
+ const u16 reg = cpu_to_be16(r | 0x100);
+ u8 data;
+ int ret;
+
+ ret = spi_write_then_read(spi, ®, 2, &data, 1);
+ if (ret < 0)
+ return 0;
+ return data;
+}
+#else
+#define snd_soc_16_8_read_spi NULL
+#endif
+
static int snd_soc_16_8_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
int (*write)(struct snd_soc_codec *codec, unsigned int, unsigned int);
unsigned int (*read)(struct snd_soc_codec *, unsigned int);
unsigned int (*i2c_read)(struct snd_soc_codec *, unsigned int);
+ unsigned int (*spi_read)(struct snd_soc_codec *, unsigned int);
} io_types[] = {
{
.addr_bits = 4, .data_bits = 12,
.addr_bits = 16, .data_bits = 8,
.write = snd_soc_16_8_write,
.i2c_read = snd_soc_16_8_read_i2c,
+ .spi_read = snd_soc_16_8_read_spi,
},
{
.addr_bits = 16, .data_bits = 16,
#ifdef CONFIG_SPI_MASTER
codec->hw_write = do_spi_write;
#endif
+ if (io_types[i].spi_read)
+ codec->hw_read = io_types[i].spi_read;
codec->control_data = container_of(codec->dev,
struct spi_device,
snd_soc_dapm_sync(dapm);
- snd_jack_report(jack->jack, status);
+ snd_jack_report(jack->jack, jack->status);
out:
mutex_unlock(&codec->mutex);
IRQF_TRIGGER_FALLING,
gpios[i].name,
&gpios[i]);
- if (ret)
+ if (ret < 0)
goto err;
if (gpios[i].wake) {
codec_dai->active--;
codec->active--;
+ if (!cpu_dai->active && !codec_dai->active)
+ rtd->rate = 0;
+
/* Muting the DAC suppresses artifacts caused during digital
* shutdown, for example from stopping clocks.
*/
snd_soc_dapm_force_enable_pin(dapm, "Mic Bias");
/* FIXME: Calculate automatically based on DAPM routes? */
- if (!machine_is_harmony() && !machine_is_ventana())
+ if (!machine_is_harmony())
snd_soc_dapm_nc_pin(dapm, "IN1L");
if (!machine_is_seaboard() && !machine_is_aebl())
snd_soc_dapm_nc_pin(dapm, "IN1R");
platform_set_drvdata(pdev, card);
snd_soc_card_set_drvdata(card, machine);
- if (machine_is_harmony() || machine_is_ventana()) {
+ if (machine_is_harmony()) {
card->dapm_routes = harmony_audio_map;
card->num_dapm_routes = ARRAY_SIZE(harmony_audio_map);
} else if (machine_is_seaboard()) {
return chip;
__error:
- if (chip && !chip->num_interfaces)
- snd_card_free(chip->card);
+ if (chip) {
+ if (!chip->num_interfaces)
+ snd_card_free(chip->card);
+ chip->probing = 0;
+ }
mutex_unlock(®ister_mutex);
__err_val:
return NULL;
# Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
#
# Define NO_DWARF if you do not want debug-info analysis feature at all.
+#
+# Define WERROR=0 to disable treating any warnings as errors.
$(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
@$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
endif
endif
+# Treat warnings as errors unless directed not to
+ifneq ($(WERROR),0)
+ CFLAGS_WERROR := -Werror
+endif
+
#
# Include saner warnings here, which can catch bugs:
#
CFLAGS_OPTIMIZE = -O6
endif
-CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
+CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 $(CFLAGS_WERROR) $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
EXTLIBS = -lpthread -lrt -lelf -lm
ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
ALL_LDFLAGS = $(LDFLAGS)
* published by the Free Software Foundation.
*/
+#include <stdlib.h>
+#ifndef __UCLIBC__
#include <libio.h>
+#endif
#include <dwarf-regs.h>
struct pt_regs_dwarfnum {
struct perf_event_attr *attr = &evsel->attr;
int track = !evsel->idx; /* only the first counter needs these */
+ attr->disabled = 1;
attr->inherit = !no_inherit;
attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
PERF_FORMAT_TOTAL_TIME_RUNNING |
}
}
+ perf_evlist__enable(evsel_list);
+
/*
* Let the child rip
*/
}
err = perf_event__parse_sample(event, attr.sample_type, sample_size,
- false, &sample);
+ false, &sample, false);
if (err) {
pr_err("Can't parse sample, err = %d\n", err);
goto out_munmap;
symbol__annotate_zero_histograms(sym);
}
-static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip)
+static void record_precise_ip(struct sym_entry *syme, struct map *map,
+ int counter, u64 ip)
{
struct annotation *notes;
struct symbol *sym;
if (pthread_mutex_trylock(¬es->lock))
return;
- ip = syme->map->map_ip(syme->map, ip);
- symbol__inc_addr_samples(sym, syme->map, counter, ip);
+ ip = map->map_ip(map, ip);
+ symbol__inc_addr_samples(sym, map, counter, ip);
pthread_mutex_unlock(¬es->lock);
}
evsel = perf_evlist__id2evsel(top.evlist, sample->id);
assert(evsel != NULL);
syme->count[evsel->idx]++;
- record_precise_ip(syme, evsel->idx, ip);
+ record_precise_ip(syme, al.map, evsel->idx, ip);
pthread_mutex_lock(&top.active_symbols_lock);
if (list_empty(&syme->node) || !syme->node.next) {
static bool first = true;
continue;
pbf += n + 3;
if (*pbf == 'x') { /* vm_exec */
+ char anonstr[] = "//anon\n";
char *execname = strchr(bf, '/');
/* Catch VDSO */
if (execname == NULL)
execname = strstr(bf, "[vdso]");
+ /* Catch anonymous mmaps */
+ if ((execname == NULL) && !strstr(bf, "["))
+ execname = anonstr;
+
if (execname == NULL)
continue;
int perf_event__parse_sample(const union perf_event *event, u64 type,
int sample_size, bool sample_id_all,
- struct perf_sample *sample);
+ struct perf_sample *sample, bool swapped);
#endif /* __PERF_RECORD_H */
}
}
+void perf_evlist__enable(struct perf_evlist *evlist)
+{
+ int cpu, thread;
+ struct perf_evsel *pos;
+
+ for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
+ list_for_each_entry(pos, &evlist->entries, node) {
+ for (thread = 0; thread < evlist->threads->nr; thread++)
+ ioctl(FD(pos, cpu, thread), PERF_EVENT_IOC_ENABLE);
+ }
+ }
+}
+
int perf_evlist__alloc_pollfd(struct perf_evlist *evlist)
{
int nfds = evlist->cpus->nr * evlist->threads->nr * evlist->nr_entries;
void perf_evlist__munmap(struct perf_evlist *evlist);
void perf_evlist__disable(struct perf_evlist *evlist);
+void perf_evlist__enable(struct perf_evlist *evlist);
static inline void perf_evlist__set_maps(struct perf_evlist *evlist,
struct cpu_map *cpus,
* Released under the GPL v2. (and only v2, not any later version)
*/
+#include <byteswap.h>
+#include "asm/bug.h"
#include "evsel.h"
#include "evlist.h"
#include "util.h"
int perf_event__parse_sample(const union perf_event *event, u64 type,
int sample_size, bool sample_id_all,
- struct perf_sample *data)
+ struct perf_sample *data, bool swapped)
{
const u64 *array;
+ /*
+ * used for cross-endian analysis. See git commit 65014ab3
+ * for why this goofiness is needed.
+ */
+ union {
+ u64 val64;
+ u32 val32[2];
+ } u;
+
+
data->cpu = data->pid = data->tid = -1;
data->stream_id = data->id = data->time = -1ULL;
}
if (type & PERF_SAMPLE_TID) {
- u32 *p = (u32 *)array;
- data->pid = p[0];
- data->tid = p[1];
+ u.val64 = *array;
+ if (swapped) {
+ /* undo swap of u64, then swap on individual u32s */
+ u.val64 = bswap_64(u.val64);
+ u.val32[0] = bswap_32(u.val32[0]);
+ u.val32[1] = bswap_32(u.val32[1]);
+ }
+
+ data->pid = u.val32[0];
+ data->tid = u.val32[1];
array++;
}
}
if (type & PERF_SAMPLE_CPU) {
- u32 *p = (u32 *)array;
- data->cpu = *p;
+
+ u.val64 = *array;
+ if (swapped) {
+ /* undo swap of u64, then swap on individual u32s */
+ u.val64 = bswap_64(u.val64);
+ u.val32[0] = bswap_32(u.val32[0]);
+ }
+
+ data->cpu = u.val32[0];
array++;
}
}
if (type & PERF_SAMPLE_RAW) {
- u32 *p = (u32 *)array;
+ const u64 *pdata;
+
+ u.val64 = *array;
+ if (WARN_ONCE(swapped,
+ "Endianness of raw data not corrected!\n")) {
+ /* undo swap of u64, then swap on individual u32s */
+ u.val64 = bswap_64(u.val64);
+ u.val32[0] = bswap_32(u.val32[0]);
+ u.val32[1] = bswap_32(u.val32[1]);
+ }
if (sample_overlap(event, array, sizeof(u32)))
return -EFAULT;
- data->raw_size = *p;
- p++;
+ data->raw_size = u.val32[0];
+ pdata = (void *) array + sizeof(u32);
- if (sample_overlap(event, p, data->raw_size))
+ if (sample_overlap(event, pdata, data->raw_size))
return -EFAULT;
- data->raw_data = p;
+ data->raw_data = (void *) pdata;
}
return 0;
if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, 0, &vr_die))
ret = -ENOENT;
}
- if (ret == 0)
+ if (ret >= 0)
ret = convert_variable(&vr_die, pf);
if (ret < 0)
first = list_entry(evlist->entries.next, struct perf_evsel, node);
err = perf_event__parse_sample(event, first->attr.sample_type,
perf_evsel__sample_size(first),
- sample_id_all, &pevent->sample);
+ sample_id_all, &pevent->sample, false);
if (err)
return PyErr_Format(PyExc_OSError,
"perf: can't parse sample, err=%d", err);
{
return perf_event__parse_sample(event, session->sample_type,
session->sample_size,
- session->sample_id_all, sample);
+ session->sample_id_all, sample,
+ session->header.needs_swap);
}
struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
{
u64 ip_l, ip_r;
+ if (!left->ms.sym && !right->ms.sym)
+ return right->level - left->level;
+
+ if (!left->ms.sym || !right->ms.sym)
+ return cmp_null(left->ms.sym, right->ms.sym);
+
if (left->ms.sym == right->ms.sym)
return 0;
- ip_l = left->ms.sym ? left->ms.sym->start : left->ip;
- ip_r = right->ms.sym ? right->ms.sym->start : right->ip;
+ ip_l = left->ms.sym->start;
+ ip_r = right->ms.sym->start;
return (int64_t)(ip_r - ip_l);
}
bool symbol_type__is_a(char symbol_type, enum map_type map_type)
{
+ symbol_type = toupper(symbol_type);
+
switch (map_type) {
case MAP__FUNCTION:
return symbol_type == 'T' || symbol_type == 'W';
case MAP__VARIABLE:
- return symbol_type == 'D' || symbol_type == 'd';
+ return symbol_type == 'D';
default:
return false;
}
}
+static int prefix_underscores_count(const char *str)
+{
+ const char *tail = str;
+
+ while (*tail == '_')
+ tail++;
+
+ return tail - str;
+}
+
+#define SYMBOL_A 0
+#define SYMBOL_B 1
+
+static int choose_best_symbol(struct symbol *syma, struct symbol *symb)
+{
+ s64 a;
+ s64 b;
+
+ /* Prefer a symbol with non zero length */
+ a = syma->end - syma->start;
+ b = symb->end - symb->start;
+ if ((b == 0) && (a > 0))
+ return SYMBOL_A;
+ else if ((a == 0) && (b > 0))
+ return SYMBOL_B;
+
+ /* Prefer a non weak symbol over a weak one */
+ a = syma->binding == STB_WEAK;
+ b = symb->binding == STB_WEAK;
+ if (b && !a)
+ return SYMBOL_A;
+ if (a && !b)
+ return SYMBOL_B;
+
+ /* Prefer a global symbol over a non global one */
+ a = syma->binding == STB_GLOBAL;
+ b = symb->binding == STB_GLOBAL;
+ if (a && !b)
+ return SYMBOL_A;
+ if (b && !a)
+ return SYMBOL_B;
+
+ /* Prefer a symbol with less underscores */
+ a = prefix_underscores_count(syma->name);
+ b = prefix_underscores_count(symb->name);
+ if (b > a)
+ return SYMBOL_A;
+ else if (a > b)
+ return SYMBOL_B;
+
+ /* If all else fails, choose the symbol with the longest name */
+ if (strlen(syma->name) >= strlen(symb->name))
+ return SYMBOL_A;
+ else
+ return SYMBOL_B;
+}
+
+static void symbols__fixup_duplicate(struct rb_root *symbols)
+{
+ struct rb_node *nd;
+ struct symbol *curr, *next;
+
+ nd = rb_first(symbols);
+
+ while (nd) {
+ curr = rb_entry(nd, struct symbol, rb_node);
+again:
+ nd = rb_next(&curr->rb_node);
+ next = rb_entry(nd, struct symbol, rb_node);
+
+ if (!nd)
+ break;
+
+ if (curr->start != next->start)
+ continue;
+
+ if (choose_best_symbol(curr, next) == SYMBOL_A) {
+ rb_erase(&next->rb_node, symbols);
+ goto again;
+ } else {
+ nd = rb_next(&curr->rb_node);
+ rb_erase(&curr->rb_node, symbols);
+ }
+ }
+}
+
static void symbols__fixup_end(struct rb_root *symbols)
{
struct rb_node *nd, *prevnd = rb_first(symbols);
char *line = NULL;
size_t n;
int err = -1;
- u64 prev_start = 0;
- char prev_symbol_type = 0;
- char *prev_symbol_name;
FILE *file = fopen(filename, "r");
if (file == NULL)
goto out_failure;
- prev_symbol_name = malloc(KSYM_NAME_LEN);
- if (prev_symbol_name == NULL)
- goto out_close;
-
err = 0;
while (!feof(file)) {
if (len + 2 >= line_len)
continue;
- symbol_type = toupper(line[len]);
+ symbol_type = line[len];
len += 2;
symbol_name = line + len;
len = line_len - len;
break;
}
- if (prev_symbol_type) {
- u64 end = start;
- if (end != prev_start)
- --end;
- err = process_symbol(arg, prev_symbol_name,
- prev_symbol_type, prev_start, end);
- if (err)
- break;
- }
-
- memcpy(prev_symbol_name, symbol_name, len + 1);
- prev_symbol_type = symbol_type;
- prev_start = start;
+ /*
+ * module symbols are not sorted so we add all
+ * symbols with zero length and rely on
+ * symbols__fixup_end() to fix it up.
+ */
+ err = process_symbol(arg, symbol_name,
+ symbol_type, start, start);
+ if (err)
+ break;
}
- free(prev_symbol_name);
free(line);
-out_close:
fclose(file);
return err;
if (dso__load_all_kallsyms(dso, filename, map) < 0)
return -1;
+ symbols__fixup_duplicate(&dso->symbols[map->type]);
+ symbols__fixup_end(&dso->symbols[map->type]);
+
if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
dso->symtab_type = SYMTAB__GUEST_KALLSYMS;
else
if (dso->has_build_id) {
u8 build_id[BUILD_ID_SIZE];
- if (elf_read_build_id(elf, build_id,
- BUILD_ID_SIZE) != BUILD_ID_SIZE)
+ if (elf_read_build_id(elf, build_id, BUILD_ID_SIZE) < 0)
goto out_elf_end;
if (!dso__build_id_equal(dso, build_id))
}
opdsec = elf_section_by_name(elf, &ehdr, &opdshdr, ".opd", &opdidx);
+ if (opdshdr.sh_type != SHT_PROGBITS)
+ opdsec = NULL;
if (opdsec)
opddata = elf_rawdata(opdsec, NULL);
* For misannotated, zeroed, ASM function sizes.
*/
if (nr > 0) {
+ symbols__fixup_duplicate(&dso->symbols[map->type]);
symbols__fixup_end(&dso->symbols[map->type]);
if (kmap) {
/*
ptr = data->d_buf;
while (ptr < (data->d_buf + data->d_size)) {
GElf_Nhdr *nhdr = ptr;
- int namesz = NOTE_ALIGN(nhdr->n_namesz),
- descsz = NOTE_ALIGN(nhdr->n_descsz);
+ size_t namesz = NOTE_ALIGN(nhdr->n_namesz),
+ descsz = NOTE_ALIGN(nhdr->n_descsz);
const char *name;
ptr += sizeof(*nhdr);
if (nhdr->n_type == NT_GNU_BUILD_ID &&
nhdr->n_namesz == sizeof("GNU")) {
if (memcmp(name, "GNU", sizeof("GNU")) == 0) {
- memcpy(bf, ptr, BUILD_ID_SIZE);
- err = BUILD_ID_SIZE;
+ size_t sz = min(size, descsz);
+ memcpy(bf, ptr, sz);
+ memset(bf + sz, 0, size - sz);
+ err = descsz;
break;
}
}
while (1) {
char bf[BUFSIZ];
GElf_Nhdr nhdr;
- int namesz, descsz;
+ size_t namesz, descsz;
if (read(fd, &nhdr, sizeof(nhdr)) != sizeof(nhdr))
break;
descsz = NOTE_ALIGN(nhdr.n_descsz);
if (nhdr.n_type == NT_GNU_BUILD_ID &&
nhdr.n_namesz == sizeof("GNU")) {
- if (read(fd, bf, namesz) != namesz)
+ if (read(fd, bf, namesz) != (ssize_t)namesz)
break;
if (memcmp(bf, "GNU", sizeof("GNU")) == 0) {
- if (read(fd, build_id,
- BUILD_ID_SIZE) == BUILD_ID_SIZE) {
+ size_t sz = min(descsz, size);
+ if (read(fd, build_id, sz) == (ssize_t)sz) {
+ memset(build_id + sz, 0, size - sz);
err = 0;
break;
}
- } else if (read(fd, bf, descsz) != descsz)
+ } else if (read(fd, bf, descsz) != (ssize_t)descsz)
break;
} else {
int n = namesz + descsz;
# Set the following to `true' to make a unstripped, unoptimized
# binary. Leave this set to `false' for production use.
-DEBUG ?= false
+DEBUG ?= true
# make the build silent. Set this to something else to make it noisy again.
V ?= false
# Set the following to 'true' to build/install the
# cpufreq-bench benchmarking tool
-CPUFRQ_BENCH ?= true
+CPUFREQ_BENCH ?= true
# Prefix to the directories we're installing to
DESTDIR ?=
ifeq ($(strip $(NLS)),true)
INSTALL_NLS += install-gmo
COMPILE_NLS += create-gmo
+ CFLAGS += -DNLS
endif
-ifeq ($(strip $(CPUFRQ_BENCH)),true)
+ifeq ($(strip $(CPUFREQ_BENCH)),true)
INSTALL_BENCH += install-bench
COMPILE_BENCH += compile-bench
endif
default: all
-centrino-decode: centrino-decode.c
- $(CC) $(CFLAGS) -o centrino-decode centrino-decode.c
+centrino-decode: ../i386/centrino-decode.c
+ $(CC) $(CFLAGS) -o $@ $<
-powernow-k8-decode: powernow-k8-decode.c
- $(CC) $(CFLAGS) -o powernow-k8-decode powernow-k8-decode.c
+powernow-k8-decode: ../i386/powernow-k8-decode.c
+ $(CC) $(CFLAGS) -o $@ $<
all: centrino-decode powernow-k8-decode
+++ /dev/null
-../i386/centrino-decode.c
\ No newline at end of file
+++ /dev/null
-../i386/powernow-k8-decode.c
\ No newline at end of file
-.TH "cpufreq-info" "1" "0.1" "Mattia Dongili" ""
+.TH "cpupower-frequency-info" "1" "0.1" "Mattia Dongili" ""
.SH "NAME"
.LP
-cpufreq\-info \- Utility to retrieve cpufreq kernel information
+cpupower frequency\-info \- Utility to retrieve cpufreq kernel information
.SH "SYNTAX"
.LP
-cpufreq\-info [\fIoptions\fP]
+cpupower [ \-c cpulist ] frequency\-info [\fIoptions\fP]
.SH "DESCRIPTION"
.LP
A small tool which prints out cpufreq information helpful to developers and interested users.
-.TH "cpufreq-set" "1" "0.1" "Mattia Dongili" ""
+.TH "cpupower-freqency-set" "1" "0.1" "Mattia Dongili" ""
.SH "NAME"
.LP
-cpufreq\-set \- A small tool which allows to modify cpufreq settings.
+cpupower frequency\-set \- A small tool which allows to modify cpufreq settings.
.SH "SYNTAX"
.LP
-cpufreq\-set [\fIoptions\fP]
+cpupower [ \-c cpu ] frequency\-set [\fIoptions\fP]
.SH "DESCRIPTION"
.LP
-cpufreq\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time.
+cpupower frequency\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time.
.SH "OPTIONS"
.LP
.TP
cpupower \- Shows and sets processor power related values
.SH SYNOPSIS
.ft B
-.B cpupower [ \-c cpulist ] subcommand [ARGS]
+.B cpupower [ \-c cpulist ] <command> [ARGS]
.B cpupower \-v|\-\-version
\fBcpupower \fP is a collection of tools to examine and tune power saving
related features of your processor.
-The manpages of the subcommands (cpupower\-<subcommand>(1)) provide detailed
+The manpages of the commands (cpupower\-<command>(1)) provide detailed
descriptions of supported features. Run \fBcpupower help\fP to get an overview
-of supported subcommands.
+of supported commands.
.SH Options
.PP
\-\-help, \-h
.RS 4
-Shows supported subcommands and general usage.
+Shows supported commands and general usage.
.RE
.PP
\-\-cpu cpulist, \-c cpulist
.RS 4
Only show or set values for specific cores.
-This option is not supported by all subcommands, details can be found in the
-manpages of the subcommands.
+This option is not supported by all commands, details can be found in the
+manpages of the commands.
-Some subcommands access all cores (typically the *\-set commands), some only
+Some commands access all cores (typically the *\-set commands), some only
the first core (typically the *\-info commands) by default.
The syntax for <cpulist> is based on how the kernel exports CPU bitmasks via
extern int cmd_idle_info(int argc, const char **argv);
extern int cmd_monitor(int argc, const char **argv);
-extern void set_help(void);
-extern void info_help(void);
-extern void freq_set_help(void);
-extern void freq_info_help(void);
-extern void idle_info_help(void);
-extern void monitor_help(void);
-
#endif
return 0;
}
-void freq_info_help(void)
-{
- printf(_("Usage: cpupower freqinfo [options]\n"));
- printf(_("Options:\n"));
- printf(_(" -e, --debug Prints out debug information [default]\n"));
- printf(_(" -f, --freq Get frequency the CPU currently runs at, according\n"
- " to the cpufreq core *\n"));
- printf(_(" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n"
- " it from hardware (only available to root) *\n"));
- printf(_(" -l, --hwlimits Determine the minimum and maximum CPU frequency allowed *\n"));
- printf(_(" -d, --driver Determines the used cpufreq kernel driver *\n"));
- printf(_(" -p, --policy Gets the currently used cpufreq policy *\n"));
- printf(_(" -g, --governors Determines available cpufreq governors *\n"));
- printf(_(" -r, --related-cpus Determines which CPUs run at the same hardware frequency *\n"));
- printf(_(" -a, --affected-cpus Determines which CPUs need to have their frequency\n"
- " coordinated by software *\n"));
- printf(_(" -s, --stats Shows cpufreq statistics if available\n"));
- printf(_(" -y, --latency Determines the maximum latency on CPU frequency changes *\n"));
- printf(_(" -b, --boost Checks for turbo or boost modes *\n"));
- printf(_(" -o, --proc Prints out information like provided by the /proc/cpufreq\n"
- " interface in 2.4. and early 2.6. kernels\n"));
- printf(_(" -m, --human human-readable output for the -f, -w, -s and -y parameters\n"));
- printf(_(" -h, --help Prints out this screen\n"));
-
- printf("\n");
- printf(_("If no argument is given, full output about\n"
- "cpufreq is printed which is useful e.g. for reporting bugs.\n\n"));
- printf(_("By default info of CPU 0 is shown which can be overridden\n"
- "with the cpupower --cpu main command option.\n"));
-}
-
static struct option info_opts[] = {
{ .name = "debug", .has_arg = no_argument, .flag = NULL, .val = 'e'},
{ .name = "boost", .has_arg = no_argument, .flag = NULL, .val = 'b'},
{ .name = "latency", .has_arg = no_argument, .flag = NULL, .val = 'y'},
{ .name = "proc", .has_arg = no_argument, .flag = NULL, .val = 'o'},
{ .name = "human", .has_arg = no_argument, .flag = NULL, .val = 'm'},
- { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'},
{ },
};
int output_param = 0;
do {
- ret = getopt_long(argc, argv, "hoefwldpgrasmyb", info_opts, NULL);
+ ret = getopt_long(argc, argv, "oefwldpgrasmyb", info_opts, NULL);
switch (ret) {
case '?':
output_param = '?';
cont = 0;
break;
- case 'h':
- output_param = 'h';
- cont = 0;
- break;
case -1:
cont = 0;
break;
return -EINVAL;
case '?':
printf(_("invalid or unknown argument\n"));
- freq_info_help();
return -EINVAL;
- case 'h':
- freq_info_help();
- return EXIT_SUCCESS;
case 'o':
proc_cpufreq_output();
return EXIT_SUCCESS;
#define NORM_FREQ_LEN 32
-void freq_set_help(void)
-{
- printf(_("Usage: cpupower frequency-set [options]\n"));
- printf(_("Options:\n"));
- printf(_(" -d FREQ, --min FREQ new minimum CPU frequency the governor may select\n"));
- printf(_(" -u FREQ, --max FREQ new maximum CPU frequency the governor may select\n"));
- printf(_(" -g GOV, --governor GOV new cpufreq governor\n"));
- printf(_(" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n"
- " governor to be available and loaded\n"));
- printf(_(" -r, --related Switches all hardware-related CPUs\n"));
- printf(_(" -h, --help Prints out this screen\n"));
- printf("\n");
- printf(_("Notes:\n"
- "1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"));
- printf(_("2. The -f FREQ, --freq FREQ parameter cannot be combined with any other parameter\n"
- " except the -c CPU, --cpu CPU parameter\n"
- "3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
- " by postfixing the value with the wanted unit name, without any space\n"
- " (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"));
-
-}
-
static struct option set_opts[] = {
{ .name = "min", .has_arg = required_argument, .flag = NULL, .val = 'd'},
{ .name = "max", .has_arg = required_argument, .flag = NULL, .val = 'u'},
{ .name = "governor", .has_arg = required_argument, .flag = NULL, .val = 'g'},
{ .name = "freq", .has_arg = required_argument, .flag = NULL, .val = 'f'},
- { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'},
{ .name = "related", .has_arg = no_argument, .flag = NULL, .val='r'},
{ },
};
static void print_unknown_arg(void)
{
printf(_("invalid or unknown argument\n"));
- freq_set_help();
}
static unsigned long string_to_frequency(const char *str)
/* parameter parsing */
do {
- ret = getopt_long(argc, argv, "d:u:g:f:hr", set_opts, NULL);
+ ret = getopt_long(argc, argv, "d:u:g:f:r", set_opts, NULL);
switch (ret) {
case '?':
print_unknown_arg();
return -EINVAL;
- case 'h':
- freq_set_help();
- return 0;
case -1:
cont = 0;
break;
}
}
-/* --freq / -f */
-
-void idle_info_help(void)
-{
- printf(_ ("Usage: cpupower idleinfo [options]\n"));
- printf(_ ("Options:\n"));
- printf(_ (" -s, --silent Only show general C-state information\n"));
- printf(_ (" -o, --proc Prints out information like provided by the /proc/acpi/processor/*/power\n"
- " interface in older kernels\n"));
- printf(_ (" -h, --help Prints out this screen\n"));
-
- printf("\n");
-}
-
static struct option info_opts[] = {
{ .name = "silent", .has_arg = no_argument, .flag = NULL, .val = 's'},
{ .name = "proc", .has_arg = no_argument, .flag = NULL, .val = 'o'},
- { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'},
{ },
};
static inline void cpuidle_exit(int fail)
{
- idle_info_help();
exit(EXIT_FAILURE);
}
unsigned int cpu = 0;
do {
- ret = getopt_long(argc, argv, "hos", info_opts, NULL);
+ ret = getopt_long(argc, argv, "os", info_opts, NULL);
if (ret == -1)
break;
switch (ret) {
output_param = '?';
cont = 0;
break;
- case 'h':
- output_param = 'h';
- cont = 0;
- break;
case 's':
verbose = 0;
break;
case '?':
printf(_("invalid or unknown argument\n"));
cpuidle_exit(EXIT_FAILURE);
- case 'h':
- cpuidle_exit(EXIT_SUCCESS);
}
/* Default is: show output of CPU 0 only */
#include "helpers/helpers.h"
#include "helpers/sysfs.h"
-void info_help(void)
-{
- printf(_("Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"));
- printf(_("Options:\n"));
- printf(_(" -b, --perf-bias Gets CPU's power vs performance policy on some\n"
- " Intel models [0-15], see manpage for details\n"));
- printf(_(" -m, --sched-mc Gets the kernel's multi core scheduler policy.\n"));
- printf(_(" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n"));
- printf(_(" -h, --help Prints out this screen\n"));
- printf(_("\nPassing no option will show all info, by default only on core 0\n"));
- printf("\n");
-}
-
static struct option set_opts[] = {
{ .name = "perf-bias", .has_arg = optional_argument, .flag = NULL, .val = 'b'},
{ .name = "sched-mc", .has_arg = optional_argument, .flag = NULL, .val = 'm'},
{ .name = "sched-smt", .has_arg = optional_argument, .flag = NULL, .val = 's'},
- { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'},
{ },
};
static void print_wrong_arg_exit(void)
{
printf(_("invalid or unknown argument\n"));
- info_help();
exit(EXIT_FAILURE);
}
textdomain(PACKAGE);
/* parameter parsing */
- while ((ret = getopt_long(argc, argv, "msbh", set_opts, NULL)) != -1) {
+ while ((ret = getopt_long(argc, argv, "msb", set_opts, NULL)) != -1) {
switch (ret) {
- case 'h':
- info_help();
- return 0;
case 'b':
if (params.perf_bias)
print_wrong_arg_exit();
#include "helpers/sysfs.h"
#include "helpers/bitmask.h"
-void set_help(void)
-{
- printf(_("Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"));
- printf(_("Options:\n"));
- printf(_(" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n"
- " Intel models [0-15], see manpage for details\n"));
- printf(_(" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n"));
- printf(_(" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler policy.\n"));
- printf(_(" -h, --help Prints out this screen\n"));
- printf("\n");
-}
-
static struct option set_opts[] = {
{ .name = "perf-bias", .has_arg = optional_argument, .flag = NULL, .val = 'b'},
{ .name = "sched-mc", .has_arg = optional_argument, .flag = NULL, .val = 'm'},
{ .name = "sched-smt", .has_arg = optional_argument, .flag = NULL, .val = 's'},
- { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'},
{ },
};
static void print_wrong_arg_exit(void)
{
printf(_("invalid or unknown argument\n"));
- set_help();
exit(EXIT_FAILURE);
}
params.params = 0;
/* parameter parsing */
- while ((ret = getopt_long(argc, argv, "m:s:b:h",
+ while ((ret = getopt_long(argc, argv, "m:s:b:",
set_opts, NULL)) != -1) {
switch (ret) {
- case 'h':
- set_help();
- return 0;
case 'b':
if (params.perf_bias)
print_wrong_arg_exit();
}
};
- if (!params.params) {
- set_help();
- return -EINVAL;
- }
+ if (!params.params)
+ print_wrong_arg_exit();
if (params.sched_mc) {
ret = sysfs_set_sched("mc", sched_mc);
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
+#include <errno.h>
#include "builtin.h"
#include "helpers/helpers.h"
struct cmd_struct {
const char *cmd;
int (*main)(int, const char **);
- void (*usage)(void);
int needs_root;
};
#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
-int cmd_help(int argc, const char **argv);
+static int cmd_help(int argc, const char **argv);
/* Global cpu_info object available for all binaries
* Info only retrieved from CPU 0
static void print_help(void);
static struct cmd_struct commands[] = {
- { "frequency-info", cmd_freq_info, freq_info_help, 0 },
- { "frequency-set", cmd_freq_set, freq_set_help, 1 },
- { "idle-info", cmd_idle_info, idle_info_help, 0 },
- { "set", cmd_set, set_help, 1 },
- { "info", cmd_info, info_help, 0 },
- { "monitor", cmd_monitor, monitor_help, 0 },
- { "help", cmd_help, print_help, 0 },
- /* { "bench", cmd_bench, NULL, 1 }, */
+ { "frequency-info", cmd_freq_info, 0 },
+ { "frequency-set", cmd_freq_set, 1 },
+ { "idle-info", cmd_idle_info, 0 },
+ { "set", cmd_set, 1 },
+ { "info", cmd_info, 0 },
+ { "monitor", cmd_monitor, 0 },
+ { "help", cmd_help, 0 },
+ /* { "bench", cmd_bench, 1 }, */
};
-int cmd_help(int argc, const char **argv)
-{
- unsigned int i;
-
- if (argc > 1) {
- for (i = 0; i < ARRAY_SIZE(commands); i++) {
- struct cmd_struct *p = commands + i;
- if (strcmp(p->cmd, argv[1]))
- continue;
- if (p->usage) {
- p->usage();
- return EXIT_SUCCESS;
- }
- }
- }
- print_help();
- if (argc == 1)
- return EXIT_SUCCESS; /* cpupower help */
- return EXIT_FAILURE;
-}
-
static void print_help(void)
{
unsigned int i;
#ifdef DEBUG
- printf(_("cpupower [ -d ][ -c cpulist ] subcommand [ARGS]\n"));
- printf(_(" -d, --debug May increase output (stderr) on some subcommands\n"));
+ printf(_("Usage:\tcpupower [-d|--debug] [-c|--cpu cpulist ] <command> [<args>]\n"));
#else
- printf(_("cpupower [ -c cpulist ] subcommand [ARGS]\n"));
+ printf(_("Usage:\tcpupower [-c|--cpu cpulist ] <command> [<args>]\n"));
#endif
- printf(_("cpupower --version\n"));
- printf(_("Supported subcommands are:\n"));
+ printf(_("Supported commands are:\n"));
for (i = 0; i < ARRAY_SIZE(commands); i++)
printf("\t%s\n", commands[i].cmd);
- printf(_("\nSome subcommands can make use of the -c cpulist option.\n"));
- printf(_("Look at the general cpupower manpage how to use it\n"));
- printf(_("and read up the subcommand's manpage whether it is supported.\n"));
- printf(_("\nUse cpupower help subcommand for getting help for above subcommands.\n"));
+ printf(_("\nNot all commands can make use of the -c cpulist option.\n"));
+ printf(_("\nUse 'cpupower help <command>' for getting help for above commands.\n"));
+}
+
+static int print_man_page(const char *subpage)
+{
+ int len;
+ char *page;
+
+ len = 10; /* enough for "cpupower-" */
+ if (subpage != NULL)
+ len += strlen(subpage);
+
+ page = malloc(len);
+ if (!page)
+ return -ENOMEM;
+
+ sprintf(page, "cpupower");
+ if ((subpage != NULL) && strcmp(subpage, "help")) {
+ strcat(page, "-");
+ strcat(page, subpage);
+ }
+
+ execlp("man", "man", page, NULL);
+
+ /* should not be reached */
+ return -EINVAL;
+}
+
+static int cmd_help(int argc, const char **argv)
+{
+ if (argc > 1) {
+ print_man_page(argv[1]); /* exits within execlp() */
+ return EXIT_FAILURE;
+ }
+
+ print_help();
+ return EXIT_SUCCESS;
}
static void print_version(void)
#include "helpers/bitmask.h"
/* Internationalization ****************************/
+#ifdef NLS
+
#define _(String) gettext(String)
#ifndef gettext_noop
#define gettext_noop(String) String
#endif
#define N_(String) gettext_noop(String)
+
+#else /* !NLS */
+
+#define _(String) String
+#define N_(String) String
+
+#endif
/* Internationalization ****************************/
extern int run_as_root;
int pkg;
int core;
int cpu;
+
+ /* flags */
+ unsigned int is_online:1;
} *core_info;
};
return (unsigned int) numwrite;
}
+/*
+ * Detect whether a CPU is online
+ *
+ * Returns:
+ * 1 -> if CPU is online
+ * 0 -> if CPU is offline
+ * negative errno values in error case
+ */
+int sysfs_is_cpu_online(unsigned int cpu)
+{
+ char path[SYSFS_PATH_MAX];
+ int fd;
+ ssize_t numread;
+ unsigned long long value;
+ char linebuf[MAX_LINE_LEN];
+ char *endp;
+ struct stat statbuf;
+
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u", cpu);
+
+ if (stat(path, &statbuf) != 0)
+ return 0;
+
+ /*
+ * kernel without CONFIG_HOTPLUG_CPU
+ * -> cpuX directory exists, but not cpuX/online file
+ */
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/online", cpu);
+ if (stat(path, &statbuf) != 0)
+ return 1;
+
+ fd = open(path, O_RDONLY);
+ if (fd == -1)
+ return -errno;
+
+ numread = read(fd, linebuf, MAX_LINE_LEN - 1);
+ if (numread < 1) {
+ close(fd);
+ return -EIO;
+ }
+ linebuf[numread] = '\0';
+ close(fd);
+
+ value = strtoull(linebuf, &endp, 0);
+ if (value > 1 || value < 0)
+ return -EINVAL;
+
+ return value;
+}
+
/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */
/*
extern unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen);
+extern int sysfs_is_cpu_online(unsigned int cpu);
+
extern unsigned long sysfs_get_idlestate_latency(unsigned int cpu,
unsigned int idlestate);
extern unsigned long sysfs_get_idlestate_usage(unsigned int cpu,
unsigned int pkg;
unsigned int thread;
unsigned int cpu;
+ /* flags */
+ unsigned int is_online:1;
};
static int __compare(const void *t1, const void *t2)
return -ENOMEM;
cpu_top->pkgs = cpu_top->cores = 0;
for (cpu = 0; cpu < cpus; cpu++) {
+ cpu_top->core_info[cpu].cpu = cpu;
+ cpu_top->core_info[cpu].is_online = sysfs_is_cpu_online(cpu);
cpu_top->core_info[cpu].pkg =
sysfs_topology_read_file(cpu, "physical_package_id");
if ((int)cpu_top->core_info[cpu].pkg != -1 &&
cpu_top->pkgs = cpu_top->core_info[cpu].pkg;
cpu_top->core_info[cpu].core =
sysfs_topology_read_file(cpu, "core_id");
- cpu_top->core_info[cpu].cpu = cpu;
}
cpu_top->pkgs++;
/* Assume idle state count is the same for all CPUs */
cpuidle_sysfs_monitor.hw_states_num = sysfs_get_idlestate_count(0);
- if (cpuidle_sysfs_monitor.hw_states_num == 0)
+ if (cpuidle_sysfs_monitor.hw_states_num <= 0)
return NULL;
for (num = 0; num < cpuidle_sysfs_monitor.hw_states_num; num++) {
/* ToDo: Document this in the manpage */
static char range_abbr[RANGE_MAX] = { 'T', 'C', 'P', 'M', };
+static void print_wrong_arg_exit(void)
+{
+ printf(_("invalid or unknown argument\n"));
+ exit(EXIT_FAILURE);
+}
+
long long timespec_diff_us(struct timespec start, struct timespec end)
{
struct timespec temp;
return (temp.tv_sec * 1000000) + (temp.tv_nsec / 1000);
}
-void monitor_help(void)
-{
- printf(_("cpupower monitor: [-m <mon1>,[<mon2>],.. ] command\n"));
- printf(_("cpupower monitor: [-m <mon1>,[<mon2>],.. ] [ -i interval_sec ]\n"));
- printf(_("cpupower monitor: -l\n"));
- printf(_("\t command: pass an arbitrary command to measure specific workload\n"));
- printf(_("\t -i: time intervall to measure for in seconds (default 1)\n"));
- printf(_("\t -l: list available CPU sleep monitors (for use with -m)\n"));
- printf(_("\t -m: show specific CPU sleep monitors only (in same order)\n"));
- printf(_("\t -h: print this help\n"));
- printf("\n");
- printf(_("only one of: -l, -m are allowed\nIf none of them is passed,"));
- printf(_(" all supported monitors are shown\n"));
-}
-
void print_n_spaces(int n)
{
int x;
unsigned long long result;
cstate_t s;
+ /* Be careful CPUs may got resorted for pkg value do not just use cpu */
+ if (!bitmask_isbitset(cpus_chosen, cpu_top.core_info[cpu].cpu))
+ return;
+
if (topology_depth > 2)
printf("%4d|", cpu_top.core_info[cpu].pkg);
if (topology_depth > 1)
}
}
}
- /* cpu offline */
- if (cpu_top.core_info[cpu].pkg == -1 ||
- cpu_top.core_info[cpu].core == -1) {
+ /*
+ * The monitor could still provide useful data, for example
+ * AMD HW counters partly sit in PCI config space.
+ * It's up to the monitor plug-in to check .is_online, this one
+ * is just for additional info.
+ */
+ if (!cpu_top.core_info[cpu].is_online) {
printf(_(" *is offline\n"));
return;
} else
if (hits == 0) {
printf(_("No matching monitor found in %s, "
"try -l option\n"), param);
- monitor_help();
exit(EXIT_FAILURE);
}
/* Override detected/registerd monitors array with requested one */
int opt;
progname = basename(argv[0]);
- while ((opt = getopt(argc, argv, "+hli:m:")) != -1) {
+ while ((opt = getopt(argc, argv, "+li:m:")) != -1) {
switch (opt) {
- case 'h':
- monitor_help();
- exit(EXIT_SUCCESS);
case 'l':
- if (mode) {
- monitor_help();
- exit(EXIT_FAILURE);
- }
+ if (mode)
+ print_wrong_arg_exit();
mode = list;
break;
case 'i':
/* only allow -i with -m or no option */
- if (mode && mode != show) {
- monitor_help();
- exit(EXIT_FAILURE);
- }
+ if (mode && mode != show)
+ print_wrong_arg_exit();
interval = atoi(optarg);
break;
case 'm':
- if (mode) {
- monitor_help();
- exit(EXIT_FAILURE);
- }
+ if (mode)
+ print_wrong_arg_exit();
mode = show;
show_monitors_param = optarg;
break;
default:
- monitor_help();
- exit(EXIT_FAILURE);
+ print_wrong_arg_exit();
}
}
if (!mode)
return EXIT_FAILURE;
}
+ /* Default is: monitor all CPUs */
+ if (bitmask_isallclear(cpus_chosen))
+ bitmask_setall(cpus_chosen);
+
dprint("System has up to %d CPU cores\n", cpu_count);
for (num = 0; all_monitors[num]; num++) {
#define MSR_TSC 0x10
+#define MSR_AMD_HWCR 0xc0010015
+
enum mperf_id { C0 = 0, Cx, AVG_FREQ, MPERF_CSTATE_COUNT };
static int mperf_get_count_percent(unsigned int self_id, double *percent,
unsigned int cpu);
static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
unsigned int cpu);
+static struct timespec time_start, time_end;
static cstate_t mperf_cstates[MPERF_CSTATE_COUNT] = {
{
},
};
+enum MAX_FREQ_MODE { MAX_FREQ_SYSFS, MAX_FREQ_TSC_REF };
+static int max_freq_mode;
+/*
+ * The max frequency mperf is ticking at (in C0), either retrieved via:
+ * 1) calculated after measurements if we know TSC ticks at mperf/P0 frequency
+ * 2) cpufreq /sys/devices/.../cpu0/cpufreq/cpuinfo_max_freq at init time
+ * 1. Is preferred as it also works without cpufreq subsystem (e.g. on Xen)
+ */
+static unsigned long max_frequency;
+
static unsigned long long tsc_at_measure_start;
static unsigned long long tsc_at_measure_end;
-static unsigned long max_frequency;
static unsigned long long *mperf_previous_count;
static unsigned long long *aperf_previous_count;
static unsigned long long *mperf_current_count;
static unsigned long long *aperf_current_count;
+
/* valid flag for all CPUs. If a MSR read failed it will be zero */
static int *is_valid;
static int mperf_get_tsc(unsigned long long *tsc)
{
- return read_msr(0, MSR_TSC, tsc);
+ int ret;
+ ret = read_msr(0, MSR_TSC, tsc);
+ if (ret)
+ dprint("Reading TSC MSR failed, returning %llu\n", *tsc);
+ return ret;
}
static int mperf_init_stats(unsigned int cpu)
return 0;
}
-/*
- * get_average_perf()
- *
- * Returns the average performance (also considers boosted frequencies)
- *
- * Input:
- * aperf_diff: Difference of the aperf register over a time period
- * mperf_diff: Difference of the mperf register over the same time period
- * max_freq: Maximum frequency (P0)
- *
- * Returns:
- * Average performance over the time period
- */
-static unsigned long get_average_perf(unsigned long long aperf_diff,
- unsigned long long mperf_diff)
-{
- unsigned int perf_percent = 0;
- if (((unsigned long)(-1) / 100) < aperf_diff) {
- int shift_count = 7;
- aperf_diff >>= shift_count;
- mperf_diff >>= shift_count;
- }
- perf_percent = (aperf_diff * 100) / mperf_diff;
- return (max_frequency * perf_percent) / 100;
-}
-
static int mperf_get_count_percent(unsigned int id, double *percent,
unsigned int cpu)
{
unsigned long long aperf_diff, mperf_diff, tsc_diff;
+ unsigned long long timediff;
if (!is_valid[cpu])
return -1;
mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu];
aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
- tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
- *percent = 100.0 * mperf_diff / tsc_diff;
- dprint("%s: mperf_diff: %llu, tsc_diff: %llu\n",
- mperf_cstates[id].name, mperf_diff, tsc_diff);
+ if (max_freq_mode == MAX_FREQ_TSC_REF) {
+ tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
+ *percent = 100.0 * mperf_diff / tsc_diff;
+ dprint("%s: TSC Ref - mperf_diff: %llu, tsc_diff: %llu\n",
+ mperf_cstates[id].name, mperf_diff, tsc_diff);
+ } else if (max_freq_mode == MAX_FREQ_SYSFS) {
+ timediff = timespec_diff_us(time_start, time_end);
+ *percent = 100.0 * mperf_diff / timediff;
+ dprint("%s: MAXFREQ - mperf_diff: %llu, time_diff: %llu\n",
+ mperf_cstates[id].name, mperf_diff, timediff);
+ } else
+ return -1;
if (id == Cx)
*percent = 100.0 - *percent;
static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
unsigned int cpu)
{
- unsigned long long aperf_diff, mperf_diff;
+ unsigned long long aperf_diff, mperf_diff, time_diff, tsc_diff;
if (id != AVG_FREQ)
return 1;
mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu];
aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
- /* Return MHz for now, might want to return KHz if column width is more
- generic */
- *count = get_average_perf(aperf_diff, mperf_diff) / 1000;
- dprint("%s: %llu\n", mperf_cstates[id].name, *count);
+ if (max_freq_mode == MAX_FREQ_TSC_REF) {
+ /* Calculate max_freq from TSC count */
+ tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
+ time_diff = timespec_diff_us(time_start, time_end);
+ max_frequency = tsc_diff / time_diff;
+ }
+ *count = max_frequency * ((double)aperf_diff / mperf_diff);
+ dprint("%s: Average freq based on %s maximum frequency:\n",
+ mperf_cstates[id].name,
+ (max_freq_mode == MAX_FREQ_TSC_REF) ? "TSC calculated" : "sysfs read");
+ dprint("%max_frequency: %lu", max_frequency);
+ dprint("aperf_diff: %llu\n", aperf_diff);
+ dprint("mperf_diff: %llu\n", mperf_diff);
+ dprint("avg freq: %llu\n", *count);
return 0;
}
int cpu;
unsigned long long dbg;
+ clock_gettime(CLOCK_REALTIME, &time_start);
mperf_get_tsc(&tsc_at_measure_start);
for (cpu = 0; cpu < cpu_count; cpu++)
unsigned long long dbg;
int cpu;
- mperf_get_tsc(&tsc_at_measure_end);
-
for (cpu = 0; cpu < cpu_count; cpu++)
mperf_measure_stats(cpu);
+ mperf_get_tsc(&tsc_at_measure_end);
+ clock_gettime(CLOCK_REALTIME, &time_end);
+
mperf_get_tsc(&dbg);
dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end);
return 0;
}
-struct cpuidle_monitor mperf_monitor;
-
-struct cpuidle_monitor *mperf_register(void)
+/*
+ * Mperf register is defined to tick at P0 (maximum) frequency
+ *
+ * Instead of reading out P0 which can be tricky to read out from HW,
+ * we use TSC counter if it reliably ticks at P0/mperf frequency.
+ *
+ * Still try to fall back to:
+ * /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
+ * on older Intel HW without invariant TSC feature.
+ * Or on AMD machines where TSC does not tick at P0 (do not exist yet, but
+ * it's still double checked (MSR_AMD_HWCR)).
+ *
+ * On these machines the user would still get useful mperf
+ * stats when acpi-cpufreq driver is loaded.
+ */
+static int init_maxfreq_mode(void)
{
+ int ret;
+ unsigned long long hwcr;
unsigned long min;
- if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF))
- return NULL;
-
- /* Assume min/max all the same on all cores */
+ if (!cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC)
+ goto use_sysfs;
+
+ if (cpupower_cpu_info.vendor == X86_VENDOR_AMD) {
+ /* MSR_AMD_HWCR tells us whether TSC runs at P0/mperf
+ * freq.
+ * A test whether hwcr is accessable/available would be:
+ * (cpupower_cpu_info.family > 0x10 ||
+ * cpupower_cpu_info.family == 0x10 &&
+ * cpupower_cpu_info.model >= 0x2))
+ * This should be the case for all aperf/mperf
+ * capable AMD machines and is therefore safe to test here.
+ * Compare with Linus kernel git commit: acf01734b1747b1ec4
+ */
+ ret = read_msr(0, MSR_AMD_HWCR, &hwcr);
+ /*
+ * If the MSR read failed, assume a Xen system that did
+ * not explicitly provide access to it and assume TSC works
+ */
+ if (ret != 0) {
+ dprint("TSC read 0x%x failed - assume TSC working\n",
+ MSR_AMD_HWCR);
+ return 0;
+ } else if (1 & (hwcr >> 24)) {
+ max_freq_mode = MAX_FREQ_TSC_REF;
+ return 0;
+ } else { /* Use sysfs max frequency if available */ }
+ } else if (cpupower_cpu_info.vendor == X86_VENDOR_INTEL) {
+ /*
+ * On Intel we assume mperf (in C0) is ticking at same
+ * rate than TSC
+ */
+ max_freq_mode = MAX_FREQ_TSC_REF;
+ return 0;
+ }
+use_sysfs:
if (cpufreq_get_hardware_limits(0, &min, &max_frequency)) {
dprint("Cannot retrieve max freq from cpufreq kernel "
"subsystem\n");
- return NULL;
+ return -1;
}
+ max_freq_mode = MAX_FREQ_SYSFS;
+ return 0;
+}
+
+/*
+ * This monitor provides:
+ *
+ * 1) Average frequency a CPU resided in
+ * This always works if the CPU has aperf/mperf capabilities
+ *
+ * 2) C0 and Cx (any sleep state) time a CPU resided in
+ * Works if mperf timer stops ticking in sleep states which
+ * seem to be the case on all current HW.
+ * Both is directly retrieved from HW registers and is independent
+ * from kernel statistics.
+ */
+struct cpuidle_monitor mperf_monitor;
+struct cpuidle_monitor *mperf_register(void)
+{
+ if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF))
+ return NULL;
+
+ if (init_maxfreq_mode())
+ return NULL;
/* Free this at program termination */
is_valid = calloc(cpu_count, sizeof(int));
projects / linux.git / commitdiff