Pull "Samsung DeviceTree update for v4.11, third round" from Krzysztof Kozlowski
1. Add descriptive user-friendly label names for power domains. This
makes debugging easier.
* tag 'samsung-dt-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add labels to all existing power domains
kernel-api.xml filesystems.xml lsm.xml kgdb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
- 80211.xml sh.xml regulator.xml w1.xml \
+ sh.xml regulator.xml w1.xml \
writing_musb_glue_layer.xml iio.xml
ifeq ($(DOCBOOKS),)
use by PCI
Format: <irq>,<irq>...
+ acpi_mask_gpe= [HW,ACPI]
+ Due to the existence of _Lxx/_Exx, some GPEs triggered
+ by unsupported hardware/firmware features can result in
+ GPE floodings that cannot be automatically disabled by
+ the GPE dispatcher.
+ This facility can be used to prevent such uncontrolled
+ GPE floodings.
+ Format: <int>
+ Support masking of GPEs numbered from 0x00 to 0x7f.
+
acpi_no_auto_serialize [HW,ACPI]
Disable auto-serialization of AML methods
AML control methods that contain the opcodes to create
it if 0 is given (See Documentation/cgroup-v1/memory.txt)
swiotlb= [ARM,IA-64,PPC,MIPS,X86]
- Format: { <int> | force }
+ Format: { <int> | force | noforce }
<int> -- Number of I/O TLB slabs
force -- force using of bounce buffers even if they
wouldn't be automatically used by the kernel
+ noforce -- Never use bounce buffers (for debugging)
switches= [HW,M68k]
io_poll (RW)
------------
-When read, this file shows the total number of block IO polls and how
-many returned success. Writing '0' to this file will disable polling
-for this device. Writing any non-zero value will enable this feature.
+When read, this file shows whether polling is enabled (1) or disabled
+(0). Writing '0' to this file will disable polling for this device.
+Writing any non-zero value will enable this feature.
io_poll_delay (RW)
------------------
--- /dev/null
+Device tree bindings for Axentia ARM devices
+============================================
+
+Linea CPU module
+----------------
+
+Required root node properties:
+compatible = "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+and following the rules from atmel-at91.txt for a sama5d31 SoC.
+
+
+TSE-850 v3 board
+----------------
+
+Required root node properties:
+compatible = "axentia,tse850v3", "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+and following the rules from above for the axentia,linea CPU module.
Required root node properties:
- compatible = "enbw,cmc", "ti,da850;
+LEGO MINDSTORMS EV3 (AM1808 based)
+Required root node properties:
+ - compatible = "lego,ev3", "ti,da850";
+
Generic DaVinci Boards
----------------------
--- /dev/null
+Marvell 98DX3236, 98DX3336 and 98DX4251 Platforms Device Tree Bindings
+----------------------------------------------------------------------
+
+Boards with a SoC of the Marvell 98DX3236, 98DX3336 and 98DX4251 families
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp-98dx3236"
+
+In addition, boards using the Marvell 98DX3336 SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp-98dx3336"
+
+In addition, boards using the Marvell 98DX4251 SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp-98dx4251"
property, containing a phandle to the clock device node, an index selecting
between gated clocks and other clocks and an index specifying the clock to
use.
+- clocks: External oscillator clock phandle
+ - high speed external clock signal (HSE)
+ - external I2S clock (I2S_CKIN)
Example:
#clock-cells = <2>
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
reg = <0x40023800 0x400>;
+ clocks = <&clk_hse>, <&clk_i2s_ckin>;
};
Specifying gated clocks
0 SYSTICK
1 FCLK
+ 2 CLK_LSI (low-power clock source)
+ 3 CLK_LSE (generated from a 32.768 kHz low-speed external
+ crystal or ceramic resonator)
+ 4 CLK_HSE_RTC (HSE division factor for RTC clock)
+ 5 CLK_RTC (real-time clock)
+ 6 PLL_VCO_I2S (vco frequency of I2S pll)
+ 7 PLL_VCO_SAI (vco frequency of SAI pll)
+ 8 CLK_LCD (LCD-TFT)
+ 9 CLK_I2S (I2S clocks)
+ 10 CLK_SAI1 (audio clocks)
+ 11 CLK_SAI2
+ 12 CLK_I2SQ_PDIV (post divisor of pll i2s q divisor)
+ 13 CLK_SAIQ_PDIV (post divisor of pll sai q divisor)
Example:
"catalyst,24c32"
+ "microchip,24c128"
+
"ramtron,24c64"
"renesas,r1ex24002"
Required properties:
- compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"
-Required properties for TPS65218:
+Required properties:
- interrupts: should be one of the following
+ - <2>: For controllers compatible with tps65217
- <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
Examples:
&tps {
tps65217-pwrbutton {
compatible = "ti,tps65217-pwrbutton";
+ interrupts = <2>;
};
};
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x2c001000 0x1000>,
- <0x2c002000 0x1000>,
+ <0x2c002000 0x2000>,
<0x2c004000 0x2000>,
<0x2c006000 0x2000>;
interrupts = <1 9 0xf04>;
--- /dev/null
+Marvell Prestera Switch Chip bindings
+-------------------------------------
+
+Required properties:
+- compatible: one of the following
+ "marvell,prestera-98dx3236",
+ "marvell,prestera-98dx3336",
+ "marvell,prestera-98dx4251",
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device
+
+Optional properties:
+- dfx: phandle reference to the "DFX Server" node
+
+Example:
+
+switch {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
+
+ packet-processor@0 {
+ compatible = "marvell,prestera-98dx3236";
+ reg = <0 0x4000000>;
+ interrupts = <33>, <34>, <35>;
+ dfx = <&dfx>;
+ };
+};
+
+DFX Server bindings
+-------------------
+
+Required properties:
+- compatible: must be "marvell,dfx-server"
+- reg: address and length of the register set for the device.
+
+Example:
+
+dfx-registers {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+ dfx: dfx@0 {
+ compatible = "marvell,dfx-server";
+ reg = <0 0x100000>;
+ };
+};
Required Properties:
-compatible: "ti,tps65217-charger"
+-interrupts: TPS65217 interrupt numbers for the AC and USB charger input change.
+ Should be <0> for the USB charger and <1> for the AC adapter.
+-interrupt-names: Should be "USB" and "AC"
This node is a subnode of the tps65217 PMIC.
Example:
tps65217-charger {
- compatible = "ti,tps65090-charger";
+ compatible = "ti,tps65217-charger";
+ interrupts = <0>, <1>;
+ interrupt-names = "USB", "AC";
};
kyo Kyocera Corporation
lacie LaCie
lantiq Lantiq Semiconductor
+lego LEGO Systems A/S
lenovo Lenovo Group Ltd.
lg LG Corporation
linux Linux-specific binding
lltc Linear Technology Corporation
lsi LSI Corp. (LSI Logic)
+lwn Liebherr-Werk Nenzing GmbH
macnica Macnica Americas
marvell Marvell Technology Group Ltd.
maxim Maxim Integrated Products
pixcir PIXCIR MICROELECTRONICS Co., Ltd
plathome Plat'Home Co., Ltd.
plda PLDA
+poslab Poslab Technology Co., Ltd.
powervr PowerVR (deprecated, use img)
pulsedlight PulsedLight, Inc
qca Qualcomm Atheros, Inc.
.. kernel-doc:: drivers/base/dma-mapping.c
:export:
-Device Drivers Power Management
--------------------------------
-
-.. kernel-doc:: drivers/base/power/main.c
- :export:
-
-Device Drivers ACPI Support
----------------------------
-
-.. kernel-doc:: drivers/acpi/scan.c
- :export:
-
-.. kernel-doc:: drivers/acpi/scan.c
- :internal:
-
Device drivers PnP support
--------------------------
possible to configure forwarding for label values equal to or
greater than the number of platform labels.
- A dense utliziation of the entries in the platform label table
- is possible and expected aas the platform labels are locally
+ A dense utilization of the entries in the platform label table
+ is possible and expected as the platform labels are locally
allocated.
If the number of platform label table entries is set to 0 no
#else
const u16 *a = (const u16 *)addr1;
const u16 *b = (const u16 *)addr2;
- return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0;
+ return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) == 0;
#endif
}
Physical Device Driver Interface
--------------------------------
-The physical device driver interface provides the parent_ops[3] structure to
-define the APIs to manage work in the mediated core driver that is related to
-the physical device.
+The physical device driver interface provides the mdev_parent_ops[3] structure
+to define the APIs to manage work in the mediated core driver that is related
+to the physical device.
-The structures in the parent_ops structure are as follows:
+The structures in the mdev_parent_ops structure are as follows:
* dev_attr_groups: attributes of the parent device
* mdev_attr_groups: attributes of the mediated device
* supported_config: attributes to define supported configurations
-The functions in the parent_ops structure are as follows:
+The functions in the mdev_parent_ops structure are as follows:
* create: allocate basic resources in a driver for a mediated device
* remove: free resources in a driver when a mediated device is destroyed
-The callbacks in the parent_ops structure are as follows:
+The callbacks in the mdev_parent_ops structure are as follows:
* open: open callback of mediated device
* close: close callback of mediated device
* write: write emulation callback
* mmap: mmap emulation callback
-A driver should use the parent_ops structure in the function call to register
-itself with the mdev core driver:
+A driver should use the mdev_parent_ops structure in the function call to
+register itself with the mdev core driver:
extern int mdev_register_device(struct device *dev,
- const struct parent_ops *ops);
+ const struct mdev_parent_ops *ops);
-However, the parent_ops structure is not required in the function call that a
-driver should use to unregister itself with the mdev core driver:
+However, the mdev_parent_ops structure is not required in the function call
+that a driver should use to unregister itself with the mdev core driver:
extern void mdev_unregister_device(struct device *dev);
sprintf(buf, "%s-%s", dev_driver_string(parent->dev), group->name);
+ (or using mdev_parent_dev(mdev) to arrive at the parent device outside
+ of the core mdev code)
+
* device_api
This attribute should show which device API is being created, for example,
[1] See Documentation/vfio.txt for more information on VFIO.
[2] struct mdev_driver in include/linux/mdev.h
-[3] struct parent_ops in include/linux/mdev.h
+[3] struct mdev_parent_ops in include/linux/mdev.h
[4] struct vfio_iommu_driver_ops in include/linux/vfio.h
F: Documentation/devicetree/bindings/sound/axentia,*
F: sound/soc/atmel/tse850-pcm5142.c
+AXENTIA ARM DEVICES
+M: Peter Rosin <peda@axentia.se>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/arm/axentia.txt
+F: arch/arm/boot/dts/at91-linea.dtsi
+F: arch/arm/boot/dts/at91-tse850-3.dts
+
AZ6007 DVB DRIVER
M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
DEVICE FREQUENCY (DEVFREQ)
M: MyungJoo Ham <myungjoo.ham@samsung.com>
M: Kyungmin Park <kyungmin.park@samsung.com>
+R: Chanwoo Choi <cw00.choi@samsung.com>
L: linux-pm@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq.git
S: Maintained
F: drivers/net/wan/sdla.c
FRAMEBUFFER LAYER
+M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-fbdev@vger.kernel.org
+T: git git://github.com/bzolnier/linux.git
Q: http://patchwork.kernel.org/project/linux-fbdev/list/
-S: Orphan
+S: Maintained
F: Documentation/fb/
F: drivers/video/
F: include/video/
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S: Maintained
F: drivers/staging/greybus/
+L: greybus-dev@lists.linaro.org
GREYBUS AUDIO PROTOCOLS DRIVERS
M: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Hyper-V CORE AND DRIVERS
M: "K. Y. Srinivasan" <kys@microsoft.com>
M: Haiyang Zhang <haiyangz@microsoft.com>
+M: Stephen Hemminger <sthemmin@microsoft.com>
L: devel@linuxdriverproject.org
S: Maintained
F: arch/x86/include/asm/mshyperv.h
NVM EXPRESS DRIVER
M: Keith Busch <keith.busch@intel.com>
M: Jens Axboe <axboe@fb.com>
+M: Christoph Hellwig <hch@lst.de>
+M: Sagi Grimberg <sagi@grimberg.me>
L: linux-nvme@lists.infradead.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
-W: https://kernel.googlesource.com/pub/scm/linux/kernel/git/axboe/linux-block/
+T: git://git.infradead.org/nvme.git
+W: http://git.infradead.org/nvme.git
S: Supported
F: drivers/nvme/host/
F: include/linux/nvme.h
+F: include/uapi/linux/nvme_ioctl.h
NVM EXPRESS TARGET DRIVER
M: Christoph Hellwig <hch@lst.de>
M: Sagi Grimberg <sagi@grimberg.me>
L: linux-nvme@lists.infradead.org
+T: git://git.infradead.org/nvme.git
+W: http://git.infradead.org/nvme.git
S: Supported
F: drivers/nvme/target/
M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
L: linux-arm-kernel@lists.infradead.org
S: Maintained
-F: drivers/firmware/psci.c
+F: drivers/firmware/psci*.c
F: include/linux/psci.h
F: include/uapi/linux/psci.h
F: drivers/xen/*swiotlb*
XFS FILESYSTEM
-M: Dave Chinner <david@fromorbit.com>
+M: Darrick J. Wong <darrick.wong@oracle.com>
M: linux-xfs@vger.kernel.org
L: linux-xfs@vger.kernel.org
W: http://xfs.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs.git
+T: git git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git
S: Supported
F: Documentation/filesystems/xfs.txt
F: fs/xfs/
VERSION = 4
PATCHLEVEL = 10
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Roaring Lionus
# *DOCUMENTATION*
config HZ_FIXED
int
- default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
- ARCH_S5PV210 || ARCH_EXYNOS4
+ default 200 if ARCH_EBSA110
default 128 if SOC_AT91RM9200
default 0
at91-kizbox2.dtb \
at91-sama5d2_xplained.dtb \
at91-sama5d3_xplained.dtb \
+ at91-tse850-3.dtb \
sama5d31ek.dtb \
sama5d33ek.dtb \
sama5d34ek.dtb \
sama5d35ek.dtb \
sama5d36ek.dtb \
+ sama5d36ek_cmp.dtb \
at91-sama5d4_ma5d4evk.dtb \
at91-sama5d4_xplained.dtb \
at91-sama5d4ek.dtb \
bcm47081-asus-rt-n18u.dtb \
bcm47081-buffalo-wzr-600dhp2.dtb \
bcm47081-buffalo-wzr-900dhp.dtb \
+ bcm47081-luxul-xap-1410.dtb \
+ bcm47081-luxul-xwr-1200.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
dtb-$(CONFIG_ARCH_DAVINCI) += \
da850-lcdk.dtb \
da850-enbw-cmc.dtb \
- da850-evm.dtb
+ da850-evm.dtb \
+ da850-lego-ev3.dtb
dtb-$(CONFIG_ARCH_DIGICOLOR) += \
cx92755_equinox.dtb
dtb-$(CONFIG_ARCH_EFM32) += \
imx6dl-gw553x.dtb \
imx6dl-hummingboard.dtb \
imx6dl-icore.dtb \
+ imx6dl-icore-rqs.dtb \
imx6dl-nit6xlite.dtb \
imx6dl-nitrogen6x.dtb \
imx6dl-phytec-pbab01.dtb \
imx6dl-sabreauto.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
+ imx6dl-savageboard.dtb \
imx6dl-ts4900.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6s-8034.dtb \
imx6q-icore.dtb \
imx6q-icore-rqs.dtb \
imx6q-marsboard.dtb \
+ imx6q-mccmon6.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
imx6q-nitrogen6_som2.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
+ imx6q-savageboard.dtb \
imx6q-sbc6x.dtb \
imx6q-tbs2910.dtb \
imx6q-ts4900.dtb \
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb \
imx6ul-geam-kit.dtb \
+ imx6ul-isiot-emmc.dtb \
+ imx6ul-isiot-nand.dtb \
imx6ul-liteboard.dtb \
+ imx6ul-opos6uldev.dtb \
imx6ul-pico-hobbit.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
vf610-cosmic.dtb \
vf610m4-cosmic.dtb \
vf610-twr.dtb \
- vf610-zii-dev-rev-b.dtb
+ vf610-zii-dev-rev-b.dtb \
+ vf610-zii-dev-rev-c.dtb
dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
imx23-olinuxino.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
logicpd-torpedo-37xx-devkit.dtb \
+ logicpd-som-lv-37xx-devkit.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-beagle-xm.dtb \
am335x-base0033.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
+ am335x-boneblack-wireless.dtb \
am335x-bonegreen.dtb \
+ am335x-bonegreen-wireless.dtb \
am335x-chiliboard.dtb \
am335x-cm-t335.dtb \
am335x-evm.dtb \
sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
+ socfpga_arria10_socdk_nand.dtb \
socfpga_arria10_socdk_qspi.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
socfpga_cyclone5_mcvevk.dtb \
armada-385-linksys-cobra.dtb \
armada-385-turris-omnia.dtb \
armada-388-clearfog.dtb \
+ armada-388-clearfog-base.dtb \
+ armada-388-clearfog-pro.dtb \
armada-388-db.dtb \
armada-388-gp.dtb \
armada-388-rd.dtb
dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
+ armada-xp-db-dxbc2.dtb \
+ armada-xp-db-xc3-24g4xg.dtb \
armada-xp-gp.dtb \
armada-xp-lenovo-ix4-300d.dtb \
armada-xp-linksys-mamba.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
+ aspeed-bmc-opp-romulus.dtb \
aspeed-ast2500-evb.dtb
endif
interrupt-controller;
reg = <0x0 0xfb001000 0x0 0x1000>,
<0x0 0xfb002000 0x0 0x2000>,
- <0x0 0xfb004000 0x0 0x1000>,
+ <0x0 0xfb004000 0x0 0x2000>,
<0x0 0xfb006000 0x0 0x2000>;
interrupts =
<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
* published by the Free Software Foundation.
*/
-#include <dt-bindings/mfd/tps65217.h>
-
/ {
cpus {
cpu@0 {
&usb0 {
status = "okay";
dr_mode = "peripheral";
+ interrupts-extended = <&intc 18 &tps 0>;
+ interrupt-names = "mc", "vbus";
};
&usb1 {
ti,pmic-shutdown-controller;
charger {
- interrupts = <TPS65217_IRQ_AC>, <TPS65217_IRQ_USB>;
- interrupts-names = "AC", "USB";
+ interrupts = <0>, <1>;
+ interrupt-names = "USB", "AC";
status = "okay";
};
pwrbutton {
- interrupts = <TPS65217_IRQ_PB>;
+ interrupts = <2>;
status = "okay";
};
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/display/tda998x.h>
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ >;
+ };
+
+ nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
+ >;
+ };
+
+ mcasp0_pins: mcasp0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+ AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+ AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+ AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+ AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+ >;
+ };
+};
+
+&lcdc {
+ status = "okay";
+
+ /* If you want to get 24 bit RGB and 16 BGR mode instead of
+ * current 16 bit RGB and 24 BGR modes, set the propety
+ * below to "crossed" and uncomment the video-ports -property
+ * in tda19988 node.
+ */
+ blue-and-red-wiring = "straight";
+
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <&hdmi_0>;
+ };
+ };
+};
+
+&i2c0 {
+ tda19988: tda19988 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+
+ pinctrl-names = "default", "off";
+ pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+ pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+ /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+ /* video-ports = <0x234501>; */
+
+ #sound-dai-cells = <0>;
+ audio-ports = < TDA998x_I2S 0x03>;
+
+ ports {
+ port@0 {
+ hdmi_0: endpoint@0 {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
+ };
+ };
+};
+
+&rtc {
+ system-power-controller;
+};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+ status = "okay";
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+/ {
+ clk_mcasp0_fixed: clk_mcasp0_fixed {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24576000>;
+ };
+
+ clk_mcasp0: clk_mcasp0 {
+ #clock-cells = <0>;
+ compatible = "gpio-gate-clock";
+ clocks = <&clk_mcasp0_fixed>;
+ enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "TI BeagleBone Black";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+
+ dailink0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ clocks = <&clk_mcasp0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tda19988>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM335x BeagleBone Black Wireless";
+ compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+ wlan_en_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us= <70000>;
+
+ /* WL_EN */
+ gpio = <&gpio3 9 0>;
+ enable-active-high;
+ };
+};
+
+&am33xx_pinmux {
+ bt_pins: pinmux_bt_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */
+ >;
+ };
+
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */
+ AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */
+ AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */
+ >;
+ };
+
+ wl18xx_pins: pinmux_wl18xx_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */
+ AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */
+ >;
+ };
+};
+
+&mac {
+ status = "disabled";
+};
+
+&mmc3 {
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ ti,needs-special-hs-handling;
+ keep-power-in-suspend;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins &bt_pins>;
+ status = "okay";
+};
+
+&gpio3 {
+ ls_buf_en {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LS_BUF_EN";
+ };
+};
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
-#include <dt-bindings/display/tda998x.h>
+#include "am335x-boneblack-common.dtsi"
/ {
model = "TI AM335x BeagleBone Black";
compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
};
-
-&ldo3_reg {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
-};
-
-&mmc1 {
- vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
- vmmc-supply = <&vmmcsd_fixed>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_pins>;
- bus-width = <8>;
- status = "okay";
-};
-
-&am33xx_pinmux {
- nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
- AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
- >;
- };
- nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
- >;
- };
-
- mcasp0_pins: mcasp0_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
- AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
- AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
- AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
- AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */
- >;
- };
-};
-
-&lcdc {
- status = "okay";
-
- /* If you want to get 24 bit RGB and 16 BGR mode instead of
- * current 16 bit RGB and 24 BGR modes, set the propety
- * below to "crossed" and uncomment the video-ports -property
- * in tda19988 node.
- */
- blue-and-red-wiring = "straight";
-
- port {
- lcdc_0: endpoint@0 {
- remote-endpoint = <&hdmi_0>;
- };
- };
-};
-
-&i2c0 {
- tda19988: tda19988 {
- compatible = "nxp,tda998x";
- reg = <0x70>;
-
- pinctrl-names = "default", "off";
- pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
- pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-
- /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
- /* video-ports = <0x234501>; */
-
- #sound-dai-cells = <0>;
- audio-ports = < TDA998x_I2S 0x03>;
-
- ports {
- port@0 {
- hdmi_0: endpoint@0 {
- remote-endpoint = <&lcdc_0>;
- };
- };
- };
- };
-};
-
-&rtc {
- system-power-controller;
-};
-
-&mcasp0 {
- #sound-dai-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&mcasp0_pins>;
- status = "okay";
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 0 0 1 0
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
-};
-
-/ {
- clk_mcasp0_fixed: clk_mcasp0_fixed {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24576000>;
- };
-
- clk_mcasp0: clk_mcasp0 {
- #clock-cells = <0>;
- compatible = "gpio-gate-clock";
- clocks = <&clk_mcasp0_fixed>;
- enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "TI BeagleBone Black";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&dailink0_master>;
- simple-audio-card,frame-master = <&dailink0_master>;
-
- dailink0_master: simple-audio-card,cpu {
- sound-dai = <&mcasp0>;
- clocks = <&clk_mcasp0>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&tda19988>;
- };
- };
-};
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ uart2_pins: uart2_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&rtc {
+ system-power-controller;
+};
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM335x BeagleBone Green Wireless";
+ compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+ wlan_en_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us= <70000>;
+
+ /* WL_EN */
+ gpio = <&gpio0 26 0>;
+ enable-active-high;
+ };
+};
+
+&am33xx_pinmux {
+ bt_pins: pinmux_bt_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */
+ >;
+ };
+
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */
+ AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */
+ AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */
+ AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */
+ >;
+ };
+
+ wl18xx_pins: pinmux_wl18xx_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x828, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */
+ AM33XX_IOPAD(0x82C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */
+ AM33XX_IOPAD(0x87C, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */
+ >;
+ };
+};
+
+&mac {
+ status = "disabled";
+};
+
+&mmc3 {
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ ti,needs-special-hs-handling;
+ keep-power-in-suspend;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins &bt_pins>;
+ status = "okay";
+};
+
+&gpio1 {
+ ls_buf_en {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LS_BUF_EN";
+ };
+};
+
+/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/
+/* in case it isn't, wilink8 ends up in one of the test modes that */
+/* intruces various issues (elp wkaeup timeouts etc.) */
+/* On the BBGW this pin is routed through the level shifter (U21) that */
+/* introduces a pullup on the line and wilink8 ends up in a bad state. */
+/* use a gpio hog to force this pin low. An alternative may be adding */
+/* an external pulldown on U21 pin 4. */
+
+&gpio3 {
+ bt_aud_in {
+ gpio-hog;
+ gpios = <16 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "MCASP0_AHCLKR";
+ };
+};
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
/ {
model = "TI AM335x BeagleBone Green";
compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
};
-
-&ldo3_reg {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
-};
-
-&mmc1 {
- vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
- vmmc-supply = <&vmmcsd_fixed>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_pins>;
- bus-width = <8>;
- status = "okay";
-};
-
-&am33xx_pinmux {
- uart2_pins: uart2_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
- AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
- >;
- };
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
- status = "okay";
-};
-
-&rtc {
- system-power-controller;
-};
&rtc {
system-power-controller;
+
+ pinctrl-0 = <&ext_wakeup>;
+ pinctrl-names = "default";
+
+ ext_wakeup: ext-wakeup {
+ pins = "ext_wakeup0";
+ input-enable;
+ };
};
/* NAND Flash */
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ chosen {
+ stdout-path = &uart0;
+ };
+
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ chosen {
+ stdout-path = &uart0;
+ };
+
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ chosen {
+ stdout-path = &uart3;
+ };
+
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
#address-cells = <2>;
#size-cells = <1>;
- ranges = <0 0 0x08000000 0x08000000>; /* CS0: NOR 128M */
+ ranges = <0 0 0x08000000 0x08000000>, /* CS0: NOR 128M */
+ <1 0 0x1c000000 0x01000000>; /* CS1: FRAM 16M */
nor@0,0 {
reg = <0 0x00000000 0x08000000>;
reg = <0x04000000 0x04000000>; /* 64MB */
};
};
+
+ fram@1,0 {
+ reg = <1 0x00000000 0x01000000>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data = <2>;
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <160>;
+ gpmc,cs-wr-off-ns = <160>;
+ gpmc,adv-on-ns = <10>;
+ gpmc,adv-rd-off-ns = <20>;
+ gpmc,adv-wr-off-ns = <20>;
+ gpmc,oe-on-ns = <30>;
+ gpmc,oe-off-ns = <150>;
+ gpmc,we-on-ns = <30>;
+ gpmc,we-off-ns = <150>;
+ gpmc,rd-cycle-ns = <160>;
+ gpmc,wr-cycle-ns = <160>;
+ gpmc,access-ns = <130>;
+ gpmc,page-burst-access-ns = <10>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ gpmc,cycle2cycle-delay-ns = <10>;
+ gpmc,wr-data-mux-bus-ns = <30>;
+ gpmc,wr-access-ns = <0>;
+ };
};
&mac {
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&phy0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
};
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&mac {
reg = <0x2d>;
};
+ i2c_tmp102: temp@4b {
+ compatible = "ti,tmp102";
+ reg = <0x4b>;
+ status = "disabled";
+ };
+
i2c_eeprom: eeprom@52 {
compatible = "atmel,24c32";
pagesize = <32>;
#address-cells = <1>;
#size-cells = <1>;
-
- partition@0 {
- label = "xload";
- reg = <0x0 0x20000>;
- };
- partition@1 {
- label = "xload_backup1";
- reg = <0x20000 0x20000>;
- };
- partition@2 {
- label = "xload_backup2";
- reg = <0x40000 0x20000>;
- };
- partition@3 {
- label = "xload_backup3";
- reg = <0x60000 0x20000>;
- };
- partition@4 {
- label = "barebox";
- reg = <0x80000 0x80000>;
- };
- partition@5 {
- label = "bareboxenv";
- reg = <0x100000 0x40000>;
- };
- partition@6 {
- label = "oftree";
- reg = <0x140000 0x40000>;
- };
- partition@7 {
- label = "kernel";
- reg = <0x180000 0x800000>;
- };
- partition@8 {
- label = "root";
- reg = <0x980000 0x0>;
- };
};
};
status = "okay";
serial_flash: m25p80@0 {
- compatible = "m25p80";
+ compatible = "jedec,spi-nor";
spi-max-frequency = <48000000>;
reg = <0x0>;
m25p,fast-read;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
-
- partition@0 {
- label = "xload";
- reg = <0x0 0x20000>;
- };
- partition@1 {
- label = "barebox";
- reg = <0x20000 0x80000>;
- };
- partition@2 {
- label = "bareboxenv";
- reg = <0xa0000 0x20000>;
- };
- partition@3 {
- label = "oftree";
- reg = <0xc0000 0x20000>;
- };
- partition@4 {
- label = "kernel";
- reg = <0xe0000 0x0>;
- };
};
};
>;
};
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ >;
+ };
+
uart4_pins: pinmux_uart4_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */
>;
};
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rxd.i2c1_sda */
- AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_txdi2c1_scl */
- >;
- };
-
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
>;
};
+ spi0_pins: pinmux_spi0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MOSI - spi0_d0.spi0_d0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MISO - spi0_d1.spi0_d1 */
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CLK - spi0_clk.spi0_clk */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */
+ AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */
+ >;
+ };
+
lwb_pins: pinmux_lwb_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */
reg = <0x24>;
};
+ bq32000: rtc@68 {
+ compatible = "ti,bq32000";
+ trickle-resistor-ohms = <1120>;
+ reg = <0x68>;
+ };
+
eeprom: eeprom@50 {
compatible = "at,24c256";
reg = <0x50>;
};
-};
-&i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
+ gpio_exp: mcp23017@20 {
+ compatible = "microchip,mcp23017";
+ reg = <0x20>;
+ };
+
};
&i2c2 {
DRVDD-supply = <&ldo4_reg>;
DVDD-supply = <&ldo3_reg>;
};
+
+ /* Ambient Light Sensor */
+ als: isl29023@44 {
+ compatible = "isil,isl29023";
+ reg = <0x44>;
+ };
+};
+
+&rtc {
+ status = "disabled";
};
&usb {
pinctrl-0 = <&uart0_pins>;
};
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
&uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
};
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+
+ flash: n25q032@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q032";
+ reg = <1>;
+ spi-max-frequency = <5000000>;
+ };
+};
+
#include "tps65217.dtsi"
&tps {
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
dual_emac_res_vlan = <2>;
};
+&davinci_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mac {
slaves = <2>;
pinctrl-names = "default";
};
&usb0 {
- dr_mode = "peripheral";
status = "okay";
};
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
i2c0 = &i2c0;
interrupt-parent = <&wakeupgen>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
memory@0 {
device_type = "memory";
display0 = &lcd0;
};
+ chosen {
+ stdout-path = &uart0;
+ };
+
evm_v3_3d: fixedregulator-v3_3d {
compatible = "regulator-fixed";
regulator-name = "evm_v3_3d";
model = "TI AM437x Industrial Development Kit";
compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43";
+ chosen {
+ stdout-path = &uart0;
+ };
+
v24_0d: fixed-regulator-v24_0d {
compatible = "regulator-fixed";
regulator-name = "V24_0D";
display0 = &lcd0;
};
+ chosen {
+ stdout-path = &uart0;
+ };
+
/* fixed 32k external oscillator clock */
clk_32k_rtc: clk_32k_rtc {
#clock-cells = <0>;
display0 = &lcd0;
};
+ chosen {
+ stdout-path = &uart0;
+ };
+
vmmcsd_fixed: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
linux,default-trigger = "mmc0";
};
};
-
- extcon_usb2: extcon_usb2 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
- };
};
&mmc1 {
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
+
+&extcon_usb2 {
+ id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};
reg = <0x0 0x80000000 0x0 0x80000000>;
};
- extcon_usb2: extcon_usb2 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- };
-
status-leds {
compatible = "gpio-leds";
cpu0-led {
extcon = <&extcon_usb2>;
};
+&extcon_usb2 {
+ id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
&mmc1 {
status = "okay";
vmmc-supply = <&v3_3d>;
&sn65hvs882 {
load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
};
+
+&pcie1 {
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
display0 = &hdmi0;
};
+ chosen {
+ stdout-path = &uart3;
+ };
+
memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
<&dra7_pmx_core 0x3f8>;
};
+&davinci_mdio {
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@2 {
+ reg = <2>;
+ };
+};
+
&mac {
status = "okay";
dual_emac;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&phy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
vmmc-supply = <&vdd_3v3>;
vmmc-aux-supply = <&ldo1_reg>;
};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+ max-speed = <100>;
+};
&mmc1 {
vmmc-supply = <&ldo1_reg>;
};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+ max-speed = <100>;
+};
rtc1 = &rtc;
};
+ chosen {
+ stdout-path = &uart3;
+ };
+
vmain: fixedregulator-vmain {
compatible = "regulator-fixed";
regulator-name = "VMAIN";
gpio-controller;
#gpio-cells = <2>;
};
+
+ extcon_usb2: tps659038_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ /* ID & VBUS GPIOs provided in board dts */
+ };
};
};
};
&usb2 {
- dr_mode = "otg";
+ dr_mode = "peripheral";
};
&mmc2 {
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
dsa {
+ status = "disabled";
+
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
};
+
+ switch: switch@10 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð1>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
};
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
};
- mdio {
+ mdio@72004 {
status = "okay";
+
+ switch@0 {
+ compatible = "marvell,mv88e6095";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
};
sata@a8000 {
};
dsa@0 {
+ status = "disabled";
+
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&ge0_rgmii_pins>;
status = "okay";
- phy-mode = "rgmii-id";
+ phy-mode = "rgmii";
fixed-link {
speed = <1000>;
pinctrl-names = "default";
pinctrl-0 = <&ge1_rgmii_pins>;
status = "okay";
- phy-mode = "rgmii-id";
+ phy-mode = "rgmii";
fixed-link {
speed = <1000>;
/* irq is connected to &pcawan pin 7 */
};
- /* Switch MV88E7176 at address 0x10 */
+ /* Switch MV88E6176 at address 0x10 */
+ switch@10 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dsa,member = <0 0>;
+
+ reg = <0x10>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ ports@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ ports@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ ports@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ ports@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ ports@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð1>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ /* port 6 is connected to eth0 */
+ };
+ };
};
&pinctrl {
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
--- /dev/null
+/*
+ * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board. Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388-clearfog.dtsi"
+
+/ {
+ model = "SolidRun Clearfog Base A1";
+ compatible = "solidrun,clearfog-base-a1",
+ "solidrun,clearfog-a1", "marvell,armada388",
+ "marvell,armada385", "marvell,armada380";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&rear_button_pins>;
+ pinctrl-names = "default";
+
+ button_0 {
+ /* The rear SW3 button */
+ label = "Rear Button";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+ð1 {
+ phy = <&phy1>;
+};
+
+&gpio0 {
+ phy1_reset {
+ gpio-hog;
+ gpios = <19 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "phy1-reset";
+ };
+};
+
+&mdio {
+ pinctrl-0 = <&mdio_pins µsom_phy_clk_pins &clearfog_phy_pins>;
+ phy1: ethernet-phy@1 {
+ /*
+ * Annoyingly, the marvell phy driver configures the LED
+ * register, rather than preserving reset-loaded setting.
+ * We undo that rubbish here.
+ */
+ marvell,reg-init = <3 16 0 0x101e>;
+ reg = <1>;
+ };
+};
+
+&pinctrl {
+ /* phy1 reset */
+ clearfog_phy_pins: clearfog-phy-pins {
+ marvell,pins = "mpp19";
+ marvell,function = "gpio";
+ };
+ rear_button_pins: rear-button-pins {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board. Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "armada-388-clearfog.dts"
+
+/ {
+ model = "SolidRun Clearfog Pro A1";
+ compatible = "solidrun,clearfog-pro-a1",
+ "solidrun,clearfog-a1", "marvell,armada388",
+ "marvell,armada385", "marvell,armada380";
+};
/*
- * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
*
* Copyright (C) 2015 Russell King
*
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
-#include "armada-388.dtsi"
-#include "armada-38x-solidrun-microsom.dtsi"
+#include "armada-388-clearfog.dtsi"
/ {
model = "SolidRun Clearfog A1";
compatible = "solidrun,clearfog-a1", "marvell,armada388",
"marvell,armada385", "marvell,armada380";
- aliases {
- /* So that mvebu u-boot can update the MAC addresses */
- ethernet1 = ð0;
- ethernet2 = ð1;
- ethernet3 = ð2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
soc {
internal-regs {
- ethernet@30000 {
- phy-mode = "sgmii";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
- bm,pool-short = <1>;
- status = "okay";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- ethernet@34000 {
- phy-mode = "sgmii";
- buffer-manager = <&bm>;
- bm,pool-long = <3>;
- bm,pool-short = <1>;
- status = "okay";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- i2c@11000 {
- /* Is there anything on this? */
- clock-frequency = <100000>;
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- /*
- * PCA9655 GPIO expander, up to 1MHz clock.
- * 0-CON3 CLKREQ#
- * 1-CON3 PERST#
- * 2-CON2 PERST#
- * 3-CON3 W_DISABLE
- * 4-CON2 CLKREQ#
- * 5-USB3 overcurrent
- * 6-USB3 power
- * 7-CON2 W_DISABLE
- * 8-JP4 P1
- * 9-JP4 P4
- * 10-JP4 P5
- * 11-m.2 DEVSLP
- * 12-SFP_LOS
- * 13-SFP_TX_FAULT
- * 14-SFP_TX_DISABLE
- * 15-SFP_MOD_DEF0
- */
- expander0: gpio-expander@20 {
- /*
- * This is how it should be:
- * compatible = "onnn,pca9655",
- * "nxp,pca9555";
- * but you can't do this because of
- * the way I2C works.
- */
- compatible = "nxp,pca9555";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x20>;
-
- pcie1_0_clkreq {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_LOW>;
- input;
- line-name = "pcie1.0-clkreq";
- };
- pcie1_0_w_disable {
- gpio-hog;
- gpios = <3 GPIO_ACTIVE_LOW>;
- output-low;
- line-name = "pcie1.0-w-disable";
- };
- pcie2_0_clkreq {
- gpio-hog;
- gpios = <4 GPIO_ACTIVE_LOW>;
- input;
- line-name = "pcie2.0-clkreq";
- };
- pcie2_0_w_disable {
- gpio-hog;
- gpios = <7 GPIO_ACTIVE_LOW>;
- output-low;
- line-name = "pcie2.0-w-disable";
- };
- usb3_ilimit {
- gpio-hog;
- gpios = <5 GPIO_ACTIVE_LOW>;
- input;
- line-name = "usb3-current-limit";
- };
- usb3_power {
- gpio-hog;
- gpios = <6 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "usb3-power";
- };
- m2_devslp {
- gpio-hog;
- gpios = <11 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "m.2 devslp";
- };
- sfp_los {
- /* SFP loss of signal */
- gpio-hog;
- gpios = <12 GPIO_ACTIVE_HIGH>;
- input;
- line-name = "sfp-los";
- };
- sfp_tx_fault {
- /* SFP laser fault */
- gpio-hog;
- gpios = <13 GPIO_ACTIVE_HIGH>;
- input;
- line-name = "sfp-tx-fault";
- };
- sfp_tx_disable {
- /* SFP transmit disable */
- gpio-hog;
- gpios = <14 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "sfp-tx-disable";
- };
- sfp_mod_def0 {
- /* SFP module present */
- gpio-hog;
- gpios = <15 GPIO_ACTIVE_LOW>;
- input;
- line-name = "sfp-mod-def0";
- };
- };
-
- /* The MCP3021 is 100kHz clock only */
- mikrobus_adc: mcp3021@4c {
- compatible = "microchip,mcp3021";
- reg = <0x4c>;
- };
-
- /* Also something at 0x64 */
- };
-
- i2c@11100 {
- /*
- * Routed to SFP, mikrobus, and PCIe.
- * SFP limits this to 100kHz, and requires
- * an AT24C01A/02/04 with address pins tied
- * low, which takes addresses 0x50 and 0x51.
- * Mikrobus doesn't specify beyond an I2C
- * bus being present.
- * PCIe uses ARP to assign addresses, or
- * 0x63-0x64.
- */
- clock-frequency = <100000>;
- pinctrl-0 = <&clearfog_i2c1_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- pinctrl@18000 {
- clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
- marvell,pins = "mpp46";
- marvell,function = "ref";
- };
- clearfog_dsa0_pins: clearfog-dsa0-pins {
- marvell,pins = "mpp23", "mpp41";
- marvell,function = "gpio";
- };
- clearfog_i2c1_pins: i2c1-pins {
- /* SFP, PCIe, mSATA, mikrobus */
- marvell,pins = "mpp26", "mpp27";
- marvell,function = "i2c1";
- };
- clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
- marvell,pins = "mpp20";
- marvell,function = "gpio";
- };
- clearfog_sdhci_pins: clearfog-sdhci-pins {
- marvell,pins = "mpp21", "mpp28",
- "mpp37", "mpp38",
- "mpp39", "mpp40";
- marvell,function = "sd0";
- };
- clearfog_spi1_cs_pins: spi1-cs-pins {
- marvell,pins = "mpp55";
- marvell,function = "spi1";
- };
- mikro_pins: mikro-pins {
- /* int: mpp22 rst: mpp29 */
- marvell,pins = "mpp22", "mpp29";
- marvell,function = "gpio";
- };
- mikro_spi_pins: mikro-spi-pins {
- marvell,pins = "mpp43";
- marvell,function = "spi1";
- };
- mikro_uart_pins: mikro-uart-pins {
- marvell,pins = "mpp24", "mpp25";
- marvell,function = "ua1";
- };
- rear_button_pins: rear-button-pins {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
- };
-
- sata@a8000 {
- /* pinctrl? */
- status = "okay";
- };
-
- sata@e0000 {
- /* pinctrl? */
- status = "okay";
- };
-
- sdhci@d8000 {
- bus-width = <4>;
- cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- pinctrl-0 = <&clearfog_sdhci_pins
- &clearfog_sdhci_cd_pins>;
- pinctrl-names = "default";
- status = "okay";
- vmmc = <®_3p3v>;
- wp-inverted;
- };
-
- serial@12100 {
- /* mikrobus uart */
- pinctrl-0 = <&mikro_uart_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- usb@58000 {
- /* CON3, nearest power. */
- status = "okay";
- };
-
usb3@f0000 {
/* CON2, nearest CPU, USB2 only. */
status = "okay";
};
-
- usb3@f8000 {
- /* CON7 */
- status = "okay";
- };
};
pcie-controller {
- status = "okay";
- /*
- * The two PCIe units are accessible through
- * the mini-PCIe connectors on the board.
- */
- pcie@2,0 {
- /* Port 1, Lane 0. CON3, nearest power. */
- reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
- status = "okay";
- };
pcie@3,0 {
/* Port 2, Lane 0. CON2, nearest CPU. */
reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
};
dsa@0 {
+ status = "disabled";
+
compatible = "marvell,dsa";
dsa,ethernet = <ð1>;
dsa,mii-bus = <&mdio>;
};
};
-&spi1 {
+ð1 {
+ /* ethernet@30000 */
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&expander0 {
/*
- * We don't seem to have the W25Q32 on the
- * A1 Rev 2.0 boards, so disable SPI.
- * CS0: W25Q32 (doesn't appear to be present)
- * CS1:
- * CS2: mikrobus
+ * PCA9655 GPIO expander:
+ * 0-CON3 CLKREQ#
+ * 1-CON3 PERST#
+ * 2-CON2 PERST#
+ * 3-CON3 W_DISABLE
+ * 4-CON2 CLKREQ#
+ * 5-USB3 overcurrent
+ * 6-USB3 power
+ * 7-CON2 W_DISABLE
+ * 8-JP4 P1
+ * 9-JP4 P4
+ * 10-JP4 P5
+ * 11-m.2 DEVSLP
+ * 12-SFP_LOS
+ * 13-SFP_TX_FAULT
+ * 14-SFP_TX_DISABLE
+ * 15-SFP_MOD_DEF0
*/
- pinctrl-0 = <&spi1_pins
- &clearfog_spi1_cs_pins
- &mikro_spi_pins>;
- pinctrl-names = "default";
+ pcie2_0_clkreq {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "pcie2.0-clkreq";
+ };
+ pcie2_0_w_disable {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "pcie2.0-w-disable";
+ };
+};
+
+&pinctrl {
+ clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+ marvell,pins = "mpp46";
+ marvell,function = "ref";
+ };
+ clearfog_dsa0_pins: clearfog-dsa0-pins {
+ marvell,pins = "mpp23", "mpp41";
+ marvell,function = "gpio";
+ };
+ clearfog_spi1_cs_pins: spi1-cs-pins {
+ marvell,pins = "mpp55";
+ marvell,function = "spi1";
+ };
+ rear_button_pins: rear-button-pins {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+};
+
+&mdio {
status = "okay";
- spi-flash@0 {
+ switch@4 {
+ compatible = "marvell,mv88e6085";
#address-cells = <1>;
#size-cells = <0>;
- compatible = "w25q32", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <3000000>;
- status = "disabled";
+ reg = <4>;
+ pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+ pinctrl-names = "default";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan5";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð1>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@6 {
+ /* 88E1512 external phy */
+ reg = <6>;
+ label = "lan6";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
};
};
+
+&spi1 {
+ /*
+ * Add SPI CS pins for clearfog:
+ * CS0: W25Q32 (not populated on uSOM)
+ * CS1:
+ * CS2: mikrobus
+ */
+ pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
+};
--- /dev/null
+/*
+ * Device Tree include file for SolidRun Clearfog 88F6828 based boards
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board. Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+ aliases {
+ /* So that mvebu u-boot can update the MAC addresses */
+ ethernet1 = ð0;
+ ethernet2 = ð1;
+ ethernet3 = ð2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ soc {
+ internal-regs {
+ sata@a8000 {
+ /* pinctrl? */
+ status = "okay";
+ };
+
+ sata@e0000 {
+ /* pinctrl? */
+ status = "okay";
+ };
+
+ sdhci@d8000 {
+ bus-width = <4>;
+ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ pinctrl-0 = <µsom_sdhci_pins
+ &clearfog_sdhci_cd_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ vmmc = <®_3p3v>;
+ wp-inverted;
+ };
+
+ usb@58000 {
+ /* CON3, nearest power. */
+ status = "okay";
+ };
+
+ usb3@f8000 {
+ /* CON7 */
+ status = "okay";
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * the mini-PCIe connectors on the board.
+ */
+ pcie@2,0 {
+ /* Port 1, Lane 0. CON3, nearest power. */
+ reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+ };
+ };
+};
+
+ð1 {
+ /* ethernet@30000 */
+ bm,pool-long = <2>;
+ bm,pool-short = <1>;
+ buffer-manager = <&bm>;
+ phy-mode = "sgmii";
+ status = "okay";
+};
+
+ð2 {
+ /* ethernet@34000 */
+ bm,pool-long = <3>;
+ bm,pool-short = <1>;
+ buffer-manager = <&bm>;
+ phy-mode = "sgmii";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&i2c0 {
+ /* Is there anything on this? */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /*
+ * PCA9655 GPIO expander, up to 1MHz clock.
+ * 0-CON3 CLKREQ#
+ * 1-CON3 PERST#
+ * 2-
+ * 3-CON3 W_DISABLE
+ * 4-
+ * 5-USB3 overcurrent
+ * 6-USB3 power
+ * 7-
+ * 8-JP4 P1
+ * 9-JP4 P4
+ * 10-JP4 P5
+ * 11-m.2 DEVSLP
+ * 12-SFP_LOS
+ * 13-SFP_TX_FAULT
+ * 14-SFP_TX_DISABLE
+ * 15-SFP_MOD_DEF0
+ */
+ expander0: gpio-expander@20 {
+ /*
+ * This is how it should be:
+ * compatible = "onnn,pca9655", "nxp,pca9555";
+ * but you can't do this because of the way I2C works.
+ */
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+
+ pcie1_0_clkreq {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "pcie1.0-clkreq";
+ };
+ pcie1_0_w_disable {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "pcie1.0-w-disable";
+ };
+ usb3_ilimit {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "usb3-current-limit";
+ };
+ usb3_power {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb3-power";
+ };
+ m2_devslp {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "m.2 devslp";
+ };
+ sfp_los {
+ /* SFP loss of signal */
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "sfp-los";
+ };
+ sfp_tx_fault {
+ /* SFP laser fault */
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "sfp-tx-fault";
+ };
+ sfp_tx_disable {
+ /* SFP transmit disable */
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "sfp-tx-disable";
+ };
+ sfp_mod_def0 {
+ /* SFP module present */
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "sfp-mod-def0";
+ };
+ };
+
+ /* The MCP3021 is 100kHz clock only */
+ mikrobus_adc: mcp3021@4c {
+ compatible = "microchip,mcp3021";
+ reg = <0x4c>;
+ };
+
+ /* Also something at 0x64 */
+};
+
+&i2c1 {
+ /*
+ * Routed to SFP, mikrobus, and PCIe.
+ * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
+ * address pins tied low, which takes addresses 0x50 and 0x51.
+ * Mikrobus doesn't specify beyond an I2C bus being present.
+ * PCIe uses ARP to assign addresses, or 0x63-0x64.
+ */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&clearfog_i2c1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pinctrl {
+ clearfog_i2c1_pins: i2c1-pins {
+ /* SFP, PCIe, mSATA, mikrobus */
+ marvell,pins = "mpp26", "mpp27";
+ marvell,function = "i2c1";
+ };
+ clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+ mikro_pins: mikro-pins {
+ /* int: mpp22 rst: mpp29 */
+ marvell,pins = "mpp22", "mpp29";
+ marvell,function = "gpio";
+ };
+ mikro_spi_pins: mikro-spi-pins {
+ marvell,pins = "mpp43";
+ marvell,function = "spi1";
+ };
+ mikro_uart_pins: mikro-uart-pins {
+ marvell,pins = "mpp24", "mpp25";
+ marvell,function = "ua1";
+ };
+};
+
+&spi1 {
+ /*
+ * Add SPI CS pins for clearfog:
+ * CS0: W25Q32 (not populated on uSOM)
+ * CS1: PIC microcontroller (Pro models)
+ * CS2: mikrobus
+ */
+ pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart1 {
+ /* mikrobus uart */
+ pinctrl-0 = <&mikro_uart_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
- ethernet@70000 {
- pinctrl-0 = <&ge0_rgmii_pins>;
- pinctrl-names = "default";
- phy = <&phy_dedicated>;
- phy-mode = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <0>;
- bm,pool-short = <1>;
- status = "okay";
- };
-
- mdio@72004 {
- /*
- * Add the phy clock here, so the phy can be
- * accessed to read its IDs prior to binding
- * with the driver.
- */
- pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>;
- pinctrl-names = "default";
-
- phy_dedicated: ethernet-phy@0 {
- /*
- * Annoyingly, the marvell phy driver
- * configures the LED register, rather
- * than preserving reset-loaded setting.
- * We undo that rubbish here.
- */
- marvell,reg-init = <3 16 0 0x101e>;
- reg = <0>;
- };
- };
-
- pinctrl@18000 {
- microsom_phy_clk_pins: microsom-phy-clk-pins {
- marvell,pins = "mpp45";
- marvell,function = "ref";
- };
- };
-
rtc@a3800 {
/*
* If the rtc doesn't work, run "date reset"
*/
status = "okay";
};
+ };
+ };
+};
- serial@12000 {
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
+&bm {
+ status = "okay";
+};
- bm@c8000 {
- status = "okay";
- };
- };
+&bm_bppi {
+ status = "okay";
+};
- bm-bppi {
- status = "okay";
- };
+ð0 {
+ /* ethernet@70000 */
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
+ phy = <&phy_dedicated>;
+ phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
+ status = "okay";
+};
+
+&mdio {
+ /*
+ * Add the phy clock here, so the phy can be accessed to read its
+ * IDs prior to binding with the driver.
+ */
+ pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>;
+ pinctrl-names = "default";
+
+ phy_dedicated: ethernet-phy@0 {
+ /*
+ * Annoyingly, the marvell phy driver configures the LED
+ * register, rather than preserving reset-loaded setting.
+ * We undo that rubbish here.
+ */
+ marvell,reg-init = <3 16 0 0x101e>;
+ reg = <0>;
+ };
+};
+
+&pinctrl {
+ microsom_phy_clk_pins: microsom-phy-clk-pins {
+ marvell,pins = "mpp45";
+ marvell,function = "ref";
+ };
+ /* Optional eMMC */
+ microsom_sdhci_pins: microsom-sdhci-pins {
+ marvell,pins = "mpp21", "mpp28", "mpp37",
+ "mpp38", "mpp39", "mpp40";
+ marvell,function = "sd0";
+ };
+};
+
+&spi1 {
+ /* The microsom has an optional W25Q32 on board, connected to CS0 */
+ pinctrl-0 = <&spi1_pins>;
+ w25q32: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q32", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <3000000>;
+ status = "disabled";
};
};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
--- /dev/null
+/*
+ * Device Tree Include file for Marvell 98dx3236 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+ model = "Marvell 98DX3236 SoC";
+ compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "marvell,98dx3236-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-v7";
+ reg = <0>;
+ clocks = <&cpuclk 0>;
+ clock-latency = <1000000>;
+ };
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+ /*
+ * 98DX3236 has 1 x1 PCIe unit Gen2.0
+ */
+ pciec: pcie-controller@82000000 {
+ compatible = "marvell,armada-xp-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ msi-parent = <&mpic>;
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
+
+ pcie1: pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+ };
+
+ internal-regs {
+ coreclk: mvebu-sar@18230 {
+ compatible = "marvell,mv98dx3236-core-clock";
+ };
+
+ cpuclk: clock-complex@18700 {
+ compatible = "marvell,mv98dx3236-cpu-clock";
+ };
+
+ corediv-clock@18740 {
+ status = "disabled";
+ };
+
+ xor@60900 {
+ status = "disabled";
+ };
+
+ crypto@90000 {
+ status = "disabled";
+ };
+
+ xor@f0900 {
+ status = "disabled";
+ };
+
+ xor@f0800 {
+ compatible = "marvell,orion-xor";
+ reg = <0xf0800 0x100
+ 0xf0a00 0x100>;
+ clocks = <&gateclk 22>;
+ status = "okay";
+
+ xor10 {
+ interrupts = <51>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor11 {
+ interrupts = <52>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ gpio0: gpio@18100 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18100 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <82>, <83>, <84>, <85>;
+ };
+
+ /* does not exist */
+ gpio1: gpio@18140 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18140 0x40>;
+ status = "disabled";
+ };
+
+ gpio2: gpio@18180 { /* rework some properties */
+ compatible = "marvell,orion-gpio";
+ reg = <0x18180 0x40>;
+ ngpios = <1>; /* only gpio #32 */
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <87>;
+ };
+
+ nand: nand@d0000 {
+ clocks = <&dfx_coredivclk 0>;
+ };
+ };
+
+ dfxr: dfx-registers@ac000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+ dfx_coredivclk: corediv-clock@f8268 {
+ compatible = "marvell,mv98dx3236-corediv-clock";
+ reg = <0xf8268 0xc>;
+ #clock-cells = <1>;
+ clocks = <&mainpll>;
+ clock-output-names = "nand";
+ };
+
+ dfx: dfx@0 {
+ compatible = "marvell,dfx-server";
+ reg = <0 0x100000>;
+ };
+ };
+
+ switch: switch@a8000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
+
+ pp0: packet-processor@0 {
+ compatible = "marvell,prestera-98dx3236";
+ reg = <0 0x4000000>;
+ interrupts = <33>, <34>, <35>;
+ dfx = <&dfx>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ compatible = "marvell,98dx3236-pinctrl";
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp0", "mpp1",
+ "mpp2", "mpp3";
+ marvell,function = "spi0";
+ };
+};
+
+&sdio {
+ status = "disabled";
+};
+
+&crypto_sram0 {
+ status = "disabled";
+};
+
+&crypto_sram1 {
+ status = "disabled";
+};
--- /dev/null
+/*
+ * Device Tree Include file for Marvell 98dx3336 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+ model = "Marvell 98DX3336 SoC";
+ compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ cpus {
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-v7";
+ reg = <1>;
+ clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
+ };
+ };
+
+ soc {
+ internal-regs {
+ resume@20980 {
+ compatible = "marvell,98dx3336-resume-ctrl";
+ reg = <0x20980 0x10>;
+ };
+ };
+ };
+};
+
+&pp0 {
+ compatible = "marvell,prestera-98dx3336";
+};
--- /dev/null
+/*
+ * Device Tree Include file for Marvell 98dx4521 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the 98dx4521 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+ model = "Marvell 98DX4251 SoC";
+ compatible = "marvell,armadaxp-98dx4521", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ cpus {
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-v7";
+ reg = <1>;
+ clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
+ };
+ };
+
+ soc {
+ internal-regs {
+ resume@20980 {
+ compatible = "marvell,98dx3336-resume-ctrl";
+ reg = <0x20980 0x10>;
+ };
+ };
+ };
+};
+
+&sdio {
+ status = "okay";
+};
+
+&pinctrl {
+ compatible = "marvell,98dx4251-pinctrl";
+
+ sdio_pins: sdio-pins {
+ marvell,pins = "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10";
+ marvell,function = "sd0";
+ };
+};
+
+&pp0 {
+ compatible = "marvell,prestera-98dx4251";
+};
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
--- /dev/null
+/*
+ * Device Tree file for DB-DXBC2 board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx4251.dtsi"
+
+/ {
+ model = "Marvell Bobcat2 Evaluation Board";
+ compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+ };
+
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <16>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+};
+
+&sdio {
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ /* No CD or WP GPIOs */
+ broken-cd;
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p64";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+
+ partition@u-boot {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ };
+ partition@u-boot-env {
+ reg = <0x00100000 0x00040000>;
+ label = "u-boot-env";
+ };
+ partition@unused {
+ reg = <0x00140000 0x00ec0000>;
+ label = "unused";
+ };
+
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for DB-XC3-24G4XG board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3336.dtsi"
+
+/ {
+ model = "DB-XC3-24G4XG";
+ compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <16>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p64";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+
+ partition@u-boot {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ };
+ partition@u-boot-env {
+ reg = <0x00100000 0x00040000>;
+ label = "u-boot-env";
+ };
+ partition@unused {
+ reg = <0x00140000 0x00ec0000>;
+ label = "unused";
+ };
+
+ };
+};
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
dsa {
+ status = "disabled";
+
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
spi-max-frequency = <40000000>;
};
};
+
+&mdio {
+ status = "okay";
+
+ switch@0 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "internet";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
&uart5 {
status = "okay";
};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,38400 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlyprintk";
};
memory {
- reg = <0x40000000 0x10000000>;
+ reg = <0x40000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@5f000000 {
+ no-map;
+ reg = <0x5f000000 0x01000000>; /* 16M */
+ };
};
};
&uart5 {
status = "okay";
};
+
+&mac0 {
+ status = "okay";
+
+ use-ncsi;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+ model = "Romulus BMC";
+ compatible = "ibm,romulus-bmc", "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@bf000000 {
+ no-map;
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ };
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ use-ncsi;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+};
reg = <0x1e6c0080 0x80>;
};
+ mac0: ethernet@1e660000 {
+ compatible = "faraday,ftgmac100";
+ reg = <0x1e660000 0x180>;
+ interrupts = <2>;
+ no-hw-checksum;
+ status = "disabled";
+ };
+
+ mac1: ethernet@1e680000 {
+ compatible = "faraday,ftgmac100";
+ reg = <0x1e680000 0x180>;
+ interrupts = <3>;
+ no-hw-checksum;
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
clocks = <&clk_clkin>;
};
+ syscon: syscon@1e6e2000 {
+ compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g4-pinctrl";
+
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
+
+ pinctrl_adc0_default: adc0_default {
+ function = "ADC0";
+ groups = "ADC0";
+ };
+
+ pinctrl_adc1_default: adc1_default {
+ function = "ADC1";
+ groups = "ADC1";
+ };
+
+ pinctrl_adc10_default: adc10_default {
+ function = "ADC10";
+ groups = "ADC10";
+ };
+
+ pinctrl_adc11_default: adc11_default {
+ function = "ADC11";
+ groups = "ADC11";
+ };
+
+ pinctrl_adc12_default: adc12_default {
+ function = "ADC12";
+ groups = "ADC12";
+ };
+
+ pinctrl_adc13_default: adc13_default {
+ function = "ADC13";
+ groups = "ADC13";
+ };
+
+ pinctrl_adc14_default: adc14_default {
+ function = "ADC14";
+ groups = "ADC14";
+ };
+
+ pinctrl_adc15_default: adc15_default {
+ function = "ADC15";
+ groups = "ADC15";
+ };
+
+ pinctrl_adc2_default: adc2_default {
+ function = "ADC2";
+ groups = "ADC2";
+ };
+
+ pinctrl_adc3_default: adc3_default {
+ function = "ADC3";
+ groups = "ADC3";
+ };
+
+ pinctrl_adc4_default: adc4_default {
+ function = "ADC4";
+ groups = "ADC4";
+ };
+
+ pinctrl_adc5_default: adc5_default {
+ function = "ADC5";
+ groups = "ADC5";
+ };
+
+ pinctrl_adc6_default: adc6_default {
+ function = "ADC6";
+ groups = "ADC6";
+ };
+
+ pinctrl_adc7_default: adc7_default {
+ function = "ADC7";
+ groups = "ADC7";
+ };
+
+ pinctrl_adc8_default: adc8_default {
+ function = "ADC8";
+ groups = "ADC8";
+ };
+
+ pinctrl_adc9_default: adc9_default {
+ function = "ADC9";
+ groups = "ADC9";
+ };
+
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
+
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
+
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
+
+ pinctrl_extrst_default: extrst_default {
+ function = "EXTRST";
+ groups = "EXTRST";
+ };
+
+ pinctrl_flack_default: flack_default {
+ function = "FLACK";
+ groups = "FLACK";
+ };
+
+ pinctrl_flbusy_default: flbusy_default {
+ function = "FLBUSY";
+ groups = "FLBUSY";
+ };
+
+ pinctrl_flwp_default: flwp_default {
+ function = "FLWP";
+ groups = "FLWP";
+ };
+
+ pinctrl_gpid_default: gpid_default {
+ function = "GPID";
+ groups = "GPID";
+ };
+
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
+
+ pinctrl_gpid2_default: gpid2_default {
+ function = "GPID2";
+ groups = "GPID2";
+ };
+
+ pinctrl_gpid4_default: gpid4_default {
+ function = "GPID4";
+ groups = "GPID4";
+ };
+
+ pinctrl_gpid6_default: gpid6_default {
+ function = "GPID6";
+ groups = "GPID6";
+ };
+
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
+
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
+
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
+
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
+
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
+
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
+
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
+
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
+
+ pinctrl_i2c14_default: i2c14_default {
+ function = "I2C14";
+ groups = "I2C14";
+ };
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
+
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
+
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
+
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
+
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
+
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
+
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
+
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
+
+ pinctrl_lpcrst_default: lpcrst_default {
+ function = "LPCRST";
+ groups = "LPCRST";
+ };
+
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
+
+ pinctrl_mac1link_default: mac1link_default {
+ function = "MAC1LINK";
+ groups = "MAC1LINK";
+ };
+
+ pinctrl_mac2link_default: mac2link_default {
+ function = "MAC2LINK";
+ groups = "MAC2LINK";
+ };
+
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
+
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
+
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
+
+ pinctrl_ncts2_default: ncts2_default {
+ function = "NCTS2";
+ groups = "NCTS2";
+ };
+
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
+
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
+
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
+
+ pinctrl_ndcd2_default: ndcd2_default {
+ function = "NDCD2";
+ groups = "NDCD2";
+ };
+
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
+
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
+
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
+
+ pinctrl_ndsr2_default: ndsr2_default {
+ function = "NDSR2";
+ groups = "NDSR2";
+ };
+
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
+
+ pinctrl_ndsr4_default: ndsr4_default {
+ function = "NDSR4";
+ groups = "NDSR4";
+ };
+
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
+
+ pinctrl_ndtr2_default: ndtr2_default {
+ function = "NDTR2";
+ groups = "NDTR2";
+ };
+
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
+
+ pinctrl_ndtr4_default: ndtr4_default {
+ function = "NDTR4";
+ groups = "NDTR4";
+ };
+
+ pinctrl_ndts4_default: ndts4_default {
+ function = "NDTS4";
+ groups = "NDTS4";
+ };
+
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
+
+ pinctrl_nri2_default: nri2_default {
+ function = "NRI2";
+ groups = "NRI2";
+ };
+
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
+
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
+
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
+
+ pinctrl_nrts2_default: nrts2_default {
+ function = "NRTS2";
+ groups = "NRTS2";
+ };
+
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
+
+ pinctrl_oscclk_default: oscclk_default {
+ function = "OSCCLK";
+ groups = "OSCCLK";
+ };
+
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
+
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
+
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
+
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
+
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
+
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
+
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
+
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
+
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
+
+ pinctrl_rgmii2_default: rgmii2_default {
+ function = "RGMII2";
+ groups = "RGMII2";
+ };
+
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
+
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
+
+ pinctrl_rom16_default: rom16_default {
+ function = "ROM16";
+ groups = "ROM16";
+ };
+
+ pinctrl_rom8_default: rom8_default {
+ function = "ROM8";
+ groups = "ROM8";
+ };
+
+ pinctrl_romcs1_default: romcs1_default {
+ function = "ROMCS1";
+ groups = "ROMCS1";
+ };
+
+ pinctrl_romcs2_default: romcs2_default {
+ function = "ROMCS2";
+ groups = "ROMCS2";
+ };
+
+ pinctrl_romcs3_default: romcs3_default {
+ function = "ROMCS3";
+ groups = "ROMCS3";
+ };
+
+ pinctrl_romcs4_default: romcs4_default {
+ function = "ROMCS4";
+ groups = "ROMCS4";
+ };
+
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
+
+ pinctrl_rxd2_default: rxd2_default {
+ function = "RXD2";
+ groups = "RXD2";
+ };
+
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
+
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
+
+ pinctrl_salt1_default: salt1_default {
+ function = "SALT1";
+ groups = "SALT1";
+ };
+
+ pinctrl_salt2_default: salt2_default {
+ function = "SALT2";
+ groups = "SALT2";
+ };
+
+ pinctrl_salt3_default: salt3_default {
+ function = "SALT3";
+ groups = "SALT3";
+ };
+
+ pinctrl_salt4_default: salt4_default {
+ function = "SALT4";
+ groups = "SALT4";
+ };
+
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
+
+ pinctrl_sd2_default: sd2_default {
+ function = "SD2";
+ groups = "SD2";
+ };
+
+ pinctrl_sgpmck_default: sgpmck_default {
+ function = "SGPMCK";
+ groups = "SGPMCK";
+ };
+
+ pinctrl_sgpmi_default: sgpmi_default {
+ function = "SGPMI";
+ groups = "SGPMI";
+ };
+
+ pinctrl_sgpmld_default: sgpmld_default {
+ function = "SGPMLD";
+ groups = "SGPMLD";
+ };
+
+ pinctrl_sgpmo_default: sgpmo_default {
+ function = "SGPMO";
+ groups = "SGPMO";
+ };
+
+ pinctrl_sgpsck_default: sgpsck_default {
+ function = "SGPSCK";
+ groups = "SGPSCK";
+ };
+
+ pinctrl_sgpsi0_default: sgpsi0_default {
+ function = "SGPSI0";
+ groups = "SGPSI0";
+ };
+
+ pinctrl_sgpsi1_default: sgpsi1_default {
+ function = "SGPSI1";
+ groups = "SGPSI1";
+ };
+
+ pinctrl_sgpsld_default: sgpsld_default {
+ function = "SGPSLD";
+ groups = "SGPSLD";
+ };
+
+ pinctrl_sioonctrl_default: sioonctrl_default {
+ function = "SIOONCTRL";
+ groups = "SIOONCTRL";
+ };
+
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
+
+ pinctrl_siopwreq_default: siopwreq_default {
+ function = "SIOPWREQ";
+ groups = "SIOPWREQ";
+ };
+
+ pinctrl_siopwrgd_default: siopwrgd_default {
+ function = "SIOPWRGD";
+ groups = "SIOPWRGD";
+ };
+
+ pinctrl_sios3_default: sios3_default {
+ function = "SIOS3";
+ groups = "SIOS3";
+ };
+
+ pinctrl_sios5_default: sios5_default {
+ function = "SIOS5";
+ groups = "SIOS5";
+ };
+
+ pinctrl_siosci_default: siosci_default {
+ function = "SIOSCI";
+ groups = "SIOSCI";
+ };
+
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
+
+ pinctrl_spi1debug_default: spi1debug_default {
+ function = "SPI1DEBUG";
+ groups = "SPI1DEBUG";
+ };
+
+ pinctrl_spi1passthru_default: spi1passthru_default {
+ function = "SPI1PASSTHRU";
+ groups = "SPI1PASSTHRU";
+ };
+
+ pinctrl_spics1_default: spics1_default {
+ function = "SPICS1";
+ groups = "SPICS1";
+ };
+
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
+
+ pinctrl_timer4_default: timer4_default {
+ function = "TIMER4";
+ groups = "TIMER4";
+ };
+
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd2_default: txd2_default {
+ function = "TXD2";
+ groups = "TXD2";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_usbcki_default: usbcki_default {
+ function = "USBCKI";
+ groups = "USBCKI";
+ };
+
+ pinctrl_vgabios_rom_default: vgabios_rom_default {
+ function = "VGABIOS_ROM";
+ groups = "VGABIOS_ROM";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi18_default: vpi18_default {
+ function = "VPI18";
+ groups = "VPI18";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpi30_default: vpi30_default {
+ function = "VPI30";
+ groups = "VPI30";
+ };
+
+ pinctrl_vpo12_default: vpo12_default {
+ function = "VPO12";
+ groups = "VPO12";
+ };
+
+ pinctrl_vpo24_default: vpo24_default {
+ function = "VPO24";
+ groups = "VPO24";
+ };
+
+ pinctrl_wdtrst1_default: wdtrst1_default {
+ function = "WDTRST1";
+ groups = "WDTRST1";
+ };
+
+ pinctrl_wdtrst2_default: wdtrst2_default {
+ function = "WDTRST2";
+ groups = "WDTRST2";
+ };
+
+ };
+ };
+
clk_apb: clk_apb@1e6e2008 {
#clock-cells = <0>;
compatible = "aspeed,g4-apb-clock";
reg = <0x1e720000 0x8000>; // 32K
};
+ gpio: gpio@1e780000 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2400-gpio";
+ reg = <0x1e780000 0x1000>;
+ interrupts = <20>;
+ gpio-ranges = <&pinctrl 0 0 220>;
+ interrupt-controller;
+ };
+
timer: timer@1e782000 {
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
reg = <0x1e6c0080 0x80>;
};
+ mac0: ethernet@1e660000 {
+ compatible = "faraday,ftgmac100";
+ reg = <0x1e660000 0x180>;
+ interrupts = <2>;
+ no-hw-checksum;
+ status = "disabled";
+ };
+
+ mac1: ethernet@1e680000 {
+ compatible = "faraday,ftgmac100";
+ reg = <0x1e680000 0x180>;
+ interrupts = <3>;
+ no-hw-checksum;
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
reg = <0x1e6e2070 0x04>;
};
+ syscon: syscon@1e6e2000 {
+ compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g5-pinctrl";
+ aspeed,external-nodes = <&gfx &lhc>;
+
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
+
+ pinctrl_adc0_default: adc0_default {
+ function = "ADC0";
+ groups = "ADC0";
+ };
+
+ pinctrl_adc1_default: adc1_default {
+ function = "ADC1";
+ groups = "ADC1";
+ };
+
+ pinctrl_adc10_default: adc10_default {
+ function = "ADC10";
+ groups = "ADC10";
+ };
+
+ pinctrl_adc11_default: adc11_default {
+ function = "ADC11";
+ groups = "ADC11";
+ };
+
+ pinctrl_adc12_default: adc12_default {
+ function = "ADC12";
+ groups = "ADC12";
+ };
+
+ pinctrl_adc13_default: adc13_default {
+ function = "ADC13";
+ groups = "ADC13";
+ };
+
+ pinctrl_adc14_default: adc14_default {
+ function = "ADC14";
+ groups = "ADC14";
+ };
+
+ pinctrl_adc15_default: adc15_default {
+ function = "ADC15";
+ groups = "ADC15";
+ };
+
+ pinctrl_adc2_default: adc2_default {
+ function = "ADC2";
+ groups = "ADC2";
+ };
+
+ pinctrl_adc3_default: adc3_default {
+ function = "ADC3";
+ groups = "ADC3";
+ };
+
+ pinctrl_adc4_default: adc4_default {
+ function = "ADC4";
+ groups = "ADC4";
+ };
+
+ pinctrl_adc5_default: adc5_default {
+ function = "ADC5";
+ groups = "ADC5";
+ };
+
+ pinctrl_adc6_default: adc6_default {
+ function = "ADC6";
+ groups = "ADC6";
+ };
+
+ pinctrl_adc7_default: adc7_default {
+ function = "ADC7";
+ groups = "ADC7";
+ };
+
+ pinctrl_adc8_default: adc8_default {
+ function = "ADC8";
+ groups = "ADC8";
+ };
+
+ pinctrl_adc9_default: adc9_default {
+ function = "ADC9";
+ groups = "ADC9";
+ };
+
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
+
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
+
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
+
+ pinctrl_espi_default: espi_default {
+ function = "ESPI";
+ groups = "ESPI";
+ };
+
+ pinctrl_fwspics1_default: fwspics1_default {
+ function = "FWSPICS1";
+ groups = "FWSPICS1";
+ };
+
+ pinctrl_fwspics2_default: fwspics2_default {
+ function = "FWSPICS2";
+ groups = "FWSPICS2";
+ };
+
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
+
+ pinctrl_gpid2_default: gpid2_default {
+ function = "GPID2";
+ groups = "GPID2";
+ };
+
+ pinctrl_gpid4_default: gpid4_default {
+ function = "GPID4";
+ groups = "GPID4";
+ };
+
+ pinctrl_gpid6_default: gpid6_default {
+ function = "GPID6";
+ groups = "GPID6";
+ };
+
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
+
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
+
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
+
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
+
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
+
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
+
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
+
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
+
+ pinctrl_i2c14_default: i2c14_default {
+ function = "I2C14";
+ groups = "I2C14";
+ };
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
+
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
+
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
+
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
+
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
+
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
+
+ pinctrl_lad0_default: lad0_default {
+ function = "LAD0";
+ groups = "LAD0";
+ };
+
+ pinctrl_lad1_default: lad1_default {
+ function = "LAD1";
+ groups = "LAD1";
+ };
+
+ pinctrl_lad2_default: lad2_default {
+ function = "LAD2";
+ groups = "LAD2";
+ };
+
+ pinctrl_lad3_default: lad3_default {
+ function = "LAD3";
+ groups = "LAD3";
+ };
+
+ pinctrl_lclk_default: lclk_default {
+ function = "LCLK";
+ groups = "LCLK";
+ };
+
+ pinctrl_lframe_default: lframe_default {
+ function = "LFRAME";
+ groups = "LFRAME";
+ };
+
+ pinctrl_lpchc_default: lpchc_default {
+ function = "LPCHC";
+ groups = "LPCHC";
+ };
+
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
+
+ pinctrl_lpcplus_default: lpcplus_default {
+ function = "LPCPLUS";
+ groups = "LPCPLUS";
+ };
+
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
+
+ pinctrl_lpcrst_default: lpcrst_default {
+ function = "LPCRST";
+ groups = "LPCRST";
+ };
+
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
+
+ pinctrl_lsirq_default: lsirq_default {
+ function = "LSIRQ";
+ groups = "LSIRQ";
+ };
+
+ pinctrl_mac1link_default: mac1link_default {
+ function = "MAC1LINK";
+ groups = "MAC1LINK";
+ };
+
+ pinctrl_mac2link_default: mac2link_default {
+ function = "MAC2LINK";
+ groups = "MAC2LINK";
+ };
+
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
+
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
+
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
+
+ pinctrl_ncts2_default: ncts2_default {
+ function = "NCTS2";
+ groups = "NCTS2";
+ };
+
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
+
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
+
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
+
+ pinctrl_ndcd2_default: ndcd2_default {
+ function = "NDCD2";
+ groups = "NDCD2";
+ };
+
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
+
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
+
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
+
+ pinctrl_ndsr2_default: ndsr2_default {
+ function = "NDSR2";
+ groups = "NDSR2";
+ };
+
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
+
+ pinctrl_ndsr4_default: ndsr4_default {
+ function = "NDSR4";
+ groups = "NDSR4";
+ };
+
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
+
+ pinctrl_ndtr2_default: ndtr2_default {
+ function = "NDTR2";
+ groups = "NDTR2";
+ };
+
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
+
+ pinctrl_ndtr4_default: ndtr4_default {
+ function = "NDTR4";
+ groups = "NDTR4";
+ };
+
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
+
+ pinctrl_nri2_default: nri2_default {
+ function = "NRI2";
+ groups = "NRI2";
+ };
+
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
+
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
+
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
+
+ pinctrl_nrts2_default: nrts2_default {
+ function = "NRTS2";
+ groups = "NRTS2";
+ };
+
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
+
+ pinctrl_nrts4_default: nrts4_default {
+ function = "NRTS4";
+ groups = "NRTS4";
+ };
+
+ pinctrl_oscclk_default: oscclk_default {
+ function = "OSCCLK";
+ groups = "OSCCLK";
+ };
+
+ pinctrl_pewake_default: pewake_default {
+ function = "PEWAKE";
+ groups = "PEWAKE";
+ };
+
+ pinctrl_pnor_default: pnor_default {
+ function = "PNOR";
+ groups = "PNOR";
+ };
+
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
+
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
+
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
+
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
+
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
+
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
+
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
+
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
+
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
+
+ pinctrl_rgmii2_default: rgmii2_default {
+ function = "RGMII2";
+ groups = "RGMII2";
+ };
+
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
+
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
+
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
+
+ pinctrl_rxd2_default: rxd2_default {
+ function = "RXD2";
+ groups = "RXD2";
+ };
+
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
+
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
+
+ pinctrl_salt1_default: salt1_default {
+ function = "SALT1";
+ groups = "SALT1";
+ };
+
+ pinctrl_salt10_default: salt10_default {
+ function = "SALT10";
+ groups = "SALT10";
+ };
+
+ pinctrl_salt11_default: salt11_default {
+ function = "SALT11";
+ groups = "SALT11";
+ };
+
+ pinctrl_salt12_default: salt12_default {
+ function = "SALT12";
+ groups = "SALT12";
+ };
+
+ pinctrl_salt13_default: salt13_default {
+ function = "SALT13";
+ groups = "SALT13";
+ };
+
+ pinctrl_salt14_default: salt14_default {
+ function = "SALT14";
+ groups = "SALT14";
+ };
+
+ pinctrl_salt2_default: salt2_default {
+ function = "SALT2";
+ groups = "SALT2";
+ };
+
+ pinctrl_salt3_default: salt3_default {
+ function = "SALT3";
+ groups = "SALT3";
+ };
+
+ pinctrl_salt4_default: salt4_default {
+ function = "SALT4";
+ groups = "SALT4";
+ };
+
+ pinctrl_salt5_default: salt5_default {
+ function = "SALT5";
+ groups = "SALT5";
+ };
+
+ pinctrl_salt6_default: salt6_default {
+ function = "SALT6";
+ groups = "SALT6";
+ };
+
+ pinctrl_salt7_default: salt7_default {
+ function = "SALT7";
+ groups = "SALT7";
+ };
+
+ pinctrl_salt8_default: salt8_default {
+ function = "SALT8";
+ groups = "SALT8";
+ };
+
+ pinctrl_salt9_default: salt9_default {
+ function = "SALT9";
+ groups = "SALT9";
+ };
+
+ pinctrl_scl1_default: scl1_default {
+ function = "SCL1";
+ groups = "SCL1";
+ };
+
+ pinctrl_scl2_default: scl2_default {
+ function = "SCL2";
+ groups = "SCL2";
+ };
+
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
+
+ pinctrl_sd2_default: sd2_default {
+ function = "SD2";
+ groups = "SD2";
+ };
+
+ pinctrl_sda1_default: sda1_default {
+ function = "SDA1";
+ groups = "SDA1";
+ };
+
+ pinctrl_sda2_default: sda2_default {
+ function = "SDA2";
+ groups = "SDA2";
+ };
+
+ pinctrl_sgps1_default: sgps1_default {
+ function = "SGPS1";
+ groups = "SGPS1";
+ };
+
+ pinctrl_sgps2_default: sgps2_default {
+ function = "SGPS2";
+ groups = "SGPS2";
+ };
+
+ pinctrl_sioonctrl_default: sioonctrl_default {
+ function = "SIOONCTRL";
+ groups = "SIOONCTRL";
+ };
+
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
+
+ pinctrl_siopwreq_default: siopwreq_default {
+ function = "SIOPWREQ";
+ groups = "SIOPWREQ";
+ };
+
+ pinctrl_siopwrgd_default: siopwrgd_default {
+ function = "SIOPWRGD";
+ groups = "SIOPWRGD";
+ };
+
+ pinctrl_sios3_default: sios3_default {
+ function = "SIOS3";
+ groups = "SIOS3";
+ };
+
+ pinctrl_sios5_default: sios5_default {
+ function = "SIOS5";
+ groups = "SIOS5";
+ };
+
+ pinctrl_siosci_default: siosci_default {
+ function = "SIOSCI";
+ groups = "SIOSCI";
+ };
+
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
+
+ pinctrl_spi1cs1_default: spi1cs1_default {
+ function = "SPI1CS1";
+ groups = "SPI1CS1";
+ };
+
+ pinctrl_spi1debug_default: spi1debug_default {
+ function = "SPI1DEBUG";
+ groups = "SPI1DEBUG";
+ };
+
+ pinctrl_spi1passthru_default: spi1passthru_default {
+ function = "SPI1PASSTHRU";
+ groups = "SPI1PASSTHRU";
+ };
+
+ pinctrl_spi2ck_default: spi2ck_default {
+ function = "SPI2CK";
+ groups = "SPI2CK";
+ };
+
+ pinctrl_spi2cs0_default: spi2cs0_default {
+ function = "SPI2CS0";
+ groups = "SPI2CS0";
+ };
+
+ pinctrl_spi2cs1_default: spi2cs1_default {
+ function = "SPI2CS1";
+ groups = "SPI2CS1";
+ };
+
+ pinctrl_spi2miso_default: spi2miso_default {
+ function = "SPI2MISO";
+ groups = "SPI2MISO";
+ };
+
+ pinctrl_spi2mosi_default: spi2mosi_default {
+ function = "SPI2MOSI";
+ groups = "SPI2MOSI";
+ };
+
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
+
+ pinctrl_timer4_default: timer4_default {
+ function = "TIMER4";
+ groups = "TIMER4";
+ };
+
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd2_default: txd2_default {
+ function = "TXD2";
+ groups = "TXD2";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_usbcki_default: usbcki_default {
+ function = "USBCKI";
+ groups = "USBCKI";
+ };
+
+ pinctrl_vgabiosrom_default: vgabiosrom_default {
+ function = "VGABIOSROM";
+ groups = "VGABIOSROM";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpo_default: vpo_default {
+ function = "VPO";
+ groups = "VPO";
+ };
+
+ pinctrl_wdtrst1_default: wdtrst1_default {
+ function = "WDTRST1";
+ groups = "WDTRST1";
+ };
+
+ pinctrl_wdtrst2_default: wdtrst2_default {
+ function = "WDTRST2";
+ groups = "WDTRST2";
+ };
+
+ };
+ };
+
clk_hpll: clk_hpll@1e6e2024 {
#clock-cells = <0>;
compatible = "aspeed,g5-hpll-clock";
reg = <0x1e6e202c 0x4>;
};
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ };
+
sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x9000>; // 36K
};
+ gpio: gpio@1e780000 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2500-gpio";
+ reg = <0x1e780000 0x1000>;
+ interrupts = <20>;
+ gpio-ranges = <&pinctrl 0 0 220>;
+ interrupt-controller;
+ };
+
timer: timer@1e782000 {
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
clocks = <&clk_apb>;
};
+
wdt1: wdt@1e785000 {
compatible = "aspeed,wdt";
reg = <0x1e785000 0x1c>;
status = "disabled";
};
+ lpc: lpc@1e789000 {
+ compatible = "aspeed,ast2500-lpc", "simple-mfd";
+ reg = <0x1e789000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e789000 0x1000>;
+
+ lpc_bmc: lpc-bmc@0 {
+ compatible = "aspeed,ast2500-lpc-bmc";
+ reg = <0x0 0x80>;
+ };
+
+ lpc_host: lpc-host@80 {
+ compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
+ reg = <0x80 0x1e0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80 0x1e0>;
+
+ reg-io-width = <4>;
+
+ lhc: lhc@20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
+ };
+ };
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x1000>;
--- /dev/null
+/*
+ * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module.
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+ compatible = "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+};
+
+&slow_xtal {
+ clock-frequency = <32768>;
+};
+
+&main_xtal {
+ clock-frequency = <12000000>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "st,24c64";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&nand0 {
+ status = "okay";
+
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+};
uart1: serial@f8020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
status = "okay";
};
};
uart3: serial@fc008000 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_default>;
status = "okay";
ahb {
apb {
+ uart0: serial@f8004000 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+ };
+
spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
};
usart3: serial@fc00c000 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
status = "okay";
};
--- /dev/null
+/*
+ * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "at91-linea.dtsi"
+
+/ {
+ model = "Axentia TSE-850 3.0";
+ compatible = "axentia,tse850v3", "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ tse850 {
+ pinctrl_usba_vbus: usba-vbus {
+ atmel,pins =
+ <AT91_PIOC 31
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+ };
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+ };
+
+ sck: oscillator {
+ compatible = "fixed-clock";
+
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ clock-output-names = "sck";
+ };
+
+ reg_3v3: regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "3v3-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ana: reg-ana {
+ compatible = "pwm-regulator";
+
+ regulator-name = "ANA";
+
+ pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
+ pwm-dutycycle-unit = <1000>;
+ pwm-dutycycle-range = <100 1000>;
+
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <20000000>;
+ regulator-ramp-delay = <1000>;
+ };
+
+ sound {
+ compatible = "axentia,tse850-pcm5142";
+
+ axentia,cpu-dai = <&ssc0>;
+ axentia,audio-codec = <&pcm5142>;
+
+ axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+ axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+ axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+
+ axentia,ana-supply = <&ana>;
+ };
+
+ dac: dpot-dac {
+ compatible = "dpot-dac";
+ vref-supply = <®_3v3>;
+ io-channels = <&dpot 0>;
+ io-channel-names = "dpot";
+ #io-channel-cells = <1>;
+ };
+
+ envelope-detector {
+ compatible = "axentia,tse850-envelope-detector";
+ io-channels = <&dac 0>;
+ io-channel-names = "dac";
+
+ interrupt-parent = <&pioA>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "comp";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ch1-red {
+ label = "ch-1:red";
+ gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+ };
+ ch1-green {
+ label = "ch-1:green";
+ gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+ };
+ ch2-red {
+ label = "ch-2:red";
+ gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
+ };
+ ch2-green {
+ label = "ch-2:green";
+ gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
+ };
+ data-red {
+ label = "data:red";
+ gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
+ };
+ data-green {
+ label = "data:green";
+ gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
+ };
+ alarm-red {
+ label = "alarm:red";
+ gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
+ };
+ alarm-green {
+ label = "alarm:green";
+ gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&nand0 {
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ barebox@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x60000>;
+ };
+
+ bareboxenv@c0000 {
+ label = "bareboxenv";
+ reg = <0xc0000 0x40000>;
+ };
+
+ bareboxenv2@100000 {
+ label = "bareboxenv2";
+ reg = <0x100000 0x40000>;
+ };
+
+ oftree@180000 {
+ label = "oftree";
+ reg = <0x180000 0x20000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+
+ ovlfs@10000000 {
+ label = "ovlfs";
+ reg = <0x10000000 0x10000000>;
+ };
+};
+
+&ssc0 {
+ #sound-dai-cells = <0>;
+
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ jc42@18 {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x18>;
+ };
+
+ dpot: mcp4651-104@28 {
+ compatible = "microchip,mcp4651-104";
+ reg = <0x28>;
+ #io-channel-cells = <1>;
+ };
+
+ pcm5142: pcm5142@4c {
+ compatible = "ti,pcm5142";
+
+ reg = <0x4c>;
+
+ AVDD-supply = <®_3v3>;
+ DVDD-supply = <®_3v3>;
+ CPVDD-supply = <®_3v3>;
+
+ clocks = <&sck>;
+
+ pll-in = <3>;
+ pll-out = <6>;
+ };
+
+ eeprom@50 {
+ compatible = "nxp,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&usart0 {
+ status = "okay";
+
+ atmel,use-dma-rx;
+};
+
+&pwm0 {
+ status = "okay";
+
+ pinctrl-0 = <&pinctrl_pwm0_pwml2_1>;
+ pinctrl-names = "default";
+};
+
+&macb1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@3 {
+ reg = <3>;
+
+ interrupt-parent = <&pioE>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&usb0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+ status = "okay";
+
+ num-ports = <1>;
+ atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+ atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>;
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&dbgu {
+ status = "okay";
+
+ dmas = <0>, <0>; /* Do not use DMA for dbgu */
+};
#address-cells = <0>;
interrupt-controller;
reg = <0x20 0x01001000 0 0x1000>,
- <0x20 0x01002000 0 0x1000>,
+ <0x20 0x01002000 0 0x2000>,
<0x20 0x01004000 0 0x2000>,
<0x20 0x01006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
#dma-cells = <1>;
};
+ sdio: sdhci@21000 {
+ compatible = "brcm,sdhci-iproc-cygnus";
+ reg = <0x21000 0x100>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ sdhci,auto-cmd12;
+ clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
+ status = "disabled";
+ };
+
amac0: ethernet@22000 {
compatible = "brcm,nsp-amac";
reg = <0x022000 0x1000>,
status = "disabled";
};
+ amac2: ethernet@24000 {
+ compatible = "brcm,nsp-amac";
+ reg = <0x024000 0x1000>,
+ <0x112000 0x1000>;
+ reg-names = "amac_base", "idm_base";
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
nand: nand@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x026000 0x600>,
brcm,nand-has-wp;
};
- gpiob: gpio@30000 {
- compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
- reg = <0x30000 0x50>;
- #gpio-cells = <2>;
- gpio-controller;
- ngpios = <4>;
- interrupt-controller;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pwm: pwm@31000 {
- compatible = "brcm,iproc-pwm";
- reg = <0x31000 0x28>;
- clocks = <&osc>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- rng: rng@33000 {
- compatible = "brcm,bcm-nsp-rng";
- reg = <0x33000 0x14>;
- };
-
qspi: qspi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
reg = <0x027200 0x184>,
#size-cells = <0>;
};
+ gpiob: gpio@30000 {
+ compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
+ reg = <0x30000 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ ngpios = <4>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pwm: pwm@31000 {
+ compatible = "brcm,iproc-pwm";
+ reg = <0x31000 0x28>;
+ clocks = <&osc>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ rng: rng@33000 {
+ compatible = "brcm,bcm-nsp-rng";
+ reg = <0x33000 0x14>;
+ };
+
ccbtimer0: timer@34000 {
compatible = "arm,sp804";
reg = <0x34000 0x1000>;
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
status = "okay";
};
+
+&vec {
+ power-domains = <&power RPI_POWER_DOMAIN_VEC>;
+ status = "okay";
+};
status = "disabled";
};
+ vec: vec@7e806000 {
+ compatible = "brcm,bcm2835-vec";
+ reg = <0x7e806000 0x1000>;
+ clocks = <&clocks BCM2835_CLOCK_VEC>;
+ interrupts = <2 27>;
+ status = "disabled";
+ };
+
pixelvalve@7e807000 {
compatible = "brcm,bcm2835-pixelvalve2";
reg = <0x7e807000 0x100>;
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
};
spi {
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
};
};
+
+&uart0 {
+ status = "okay";
+};
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
spi {
};
};
};
-
-&uart0 {
- status = "okay";
-};
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
gpio-keys {
--- /dev/null
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+ compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Luxul XAP-1410 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Luxul XWR-1200 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ lan3 {
+ label = "bcm53xx:green:lan3";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ lan4 {
+ label = "bcm53xx:green:lan4";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ wan {
+ label = "bcm53xx:green:wan";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ lan2 {
+ label = "bcm53xx:green:lan2";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ usb {
+ label = "bcm53xx:green:usb";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ lan1 {
+ label = "bcm53xx:green:lan1";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
};
};
};
+
+&uart0 {
+ status = "okay";
+};
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
};
leds {
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
};
};
-&uart0 {
- status = "okay";
+&usb2 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
};
};
-&uart0 {
- status = "okay";
+&pcie0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5735000 5835000>;
+ };
+ };
+};
+
+&pcie1 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@1,0,0 {
+ reg = <0x0000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@1,1,0 {
+ reg = <0x0000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@1,2,2 {
+ reg = <0x1000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@1,4,0 {
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5170000 5730000>;
+ };
+ };
+ };
+ };
};
&usb2 {
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
&uart0 {
clock-frequency = <125000000>;
+ status = "okay";
};
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
nand: nand@18028000 {
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
};
lan3 {
- label = "bcm53xx:green:lan1";
+ label = "bcm53xx:green:lan3";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
lan4 {
- label = "bcm53xx:green:lan0";
+ label = "bcm53xx:green:lan4";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
};
lan1 {
- label = "bcm53xx:green:lan3";
+ label = "bcm53xx:green:lan1";
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
};
leds {
};
};
};
-
-&uart0 {
- status = "okay";
-};
&uart0 {
clock-frequency = <125000000>;
+ status = "okay";
};
#gpio-cells = <2>;
};
+ pcie0: pcie@12000 {
+ reg = <0x00012000 0x1000>;
+ };
+
+ pcie1: pcie@13000 {
+ reg = <0x00013000 0x1000>;
+ };
+
usb2: usb2@21000 {
reg = <0x00021000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges;
+
+ interrupt-parent = <&gic>;
+
+ ehci: ehci@21000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ehci";
+ reg = <0x00021000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb2_phy>;
+ };
+
+ ohci: ohci@22000 {
+ #usb-cells = <0>;
- phys = <&usb2_phy>;
+ compatible = "generic-ohci";
+ reg = <0x00022000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
usb3: usb3@23000 {
#address-cells = <1>;
#size-cells = <1>;
+ ranges;
+
+ interrupt-parent = <&gic>;
+
+ xhci: xhci@23000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-xhci";
+ reg = <0x00023000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy>;
+ phy-names = "usb";
+ };
};
spi@29000 {
reg = <0x4000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ehci_port1: port@1 {
+ reg = <1>;
+ };
+
+ ehci_port2: port@2 {
+ reg = <2>;
+ };
};
ohci: ohci@d000 {
reg = <0xd000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ohci_port1: port@1 {
+ reg = <1>;
+ };
+
+ ohci_port2: port@2 {
+ reg = <2>;
+ };
};
};
reg = <0x00000000 0x08000000>;
};
};
-
-&uart0 {
- status = "okay";
-};
reg = <0x00000000 0x08000000>;
};
};
-
-&uart0 {
- status = "okay";
-};
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
&uart0 {
clock-frequency = <62499840>;
- status = "okay";
};
&uart1 {
status = "okay";
};
-
&amac1 {
status = "okay";
};
};
};
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
status = "okay";
};
-
&amac1 {
status = "okay";
};
};
};
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
+
&sata_phy0 {
status = "okay";
};
};
};
+/* XHCI support needed to be complete */
+
+&amac0 {
+ status = "okay";
+};
+
&i2c0 {
temperature-sensor@4c {
compatible = "adi,adt7461a";
};
};
-/* XHCI, MMC, and Ethernet support needed to be complete */
-
-&uart0 {
- status = "okay";
-};
-
&pcie0 {
status = "okay";
};
status = "okay";
};
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_sel>;
+ nand_sel: nand_sel {
+ function = "nand";
+ groups = "nand_grp";
+ };
+};
+
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
+
&sata_phy0 {
status = "okay";
};
status = "okay";
};
-&pinctrl {
- pinctrl-names = "default";
- pinctrl-0 = <&nand_sel>;
- nand_sel: nand_sel {
- function = "nand";
- groups = "nand_grp";
- };
+&sdio {
+ status = "ok";
+};
+
+&uart0 {
+ status = "okay";
};
status = "okay";
};
+&amac1 {
+ status = "okay";
+};
+
+&amac2 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
};
};
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
+
&srab {
compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
status = "okay";
status = "okay";
};
+&amac1 {
+ status = "okay";
+};
+
+&amac2 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
};
};
+&sata_phy0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
+
&srab {
compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
status = "okay";
};
};
-&sata_phy0 {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
&uart0 {
status = "okay";
};
/*
* BSD LICENSE
*
- * Copyright (c) 2016 Broadcom. All rights reserved.
+ * Copyright(c) 2016 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
};
};
+&amac0 {
+ status = "okay";
+};
+
+&amac1 {
+ status = "okay";
+};
+
+&amac2 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
};
};
-&uart0 {
- status = "okay";
-};
-
&pcie0 {
status = "okay";
};
};
};
-&amac0 {
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
+
+&sata_phy0 {
+ status = "okay";
+};
+
+&sata_phy1 {
+ status = "okay";
+};
+
+&sata {
status = "okay";
};
};
};
-&sata_phy0 {
- status = "okay";
-};
-
-&sata_phy1 {
- status = "okay";
-};
-
-&sata {
+&uart0 {
status = "okay";
};
};
};
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
&amac0 {
status = "okay";
};
status = "okay";
};
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
-};
-
-&pcie2 {
- status = "okay";
-};
-
-&sata_phy0 {
- status = "okay";
-};
-
-&sata_phy1 {
- status = "okay";
-};
-
-&sata {
+&amac2 {
status = "okay";
};
reg = <0x00000000 0x00200000>;
read-only;
};
- partition@1 {
+ partition@200000 {
label = "nenv";
reg = <0x00200000 0x00400000>;
};
- partition@2 {
+ partition@600000 {
label = "nsystem";
reg = <0x00600000 0x00a00000>;
};
- partition@3 {
+ partition@1000000 {
label = "nrootfs";
reg = <0x01000000 0x03000000>;
};
- partition@4 {
+ partition@4000000 {
label = "ncustfs";
reg = <0x04000000 0x3c000000>;
};
};
};
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
+
&pinctrl {
pinctrl-names = "default";
- pinctrl-0 = <&nand_sel>;
+ pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>;
+
nand_sel: nand_sel {
function = "nand";
groups = "nand_grp";
};
+
+ gpiobs: gpiobs {
+ function = "gpio_b";
+ groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp",
+ "gpio_b_3_grp";
+ };
+
+ pwmc: pwmc {
+ function = "pwm";
+ groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp";
+ };
+
+ emmc_sel: emmc_sel {
+ function = "emmc";
+ groups = "emmc_grp";
+ };
+};
+
+&pwm {
+ status = "okay";
};
&qspi {
};
};
};
+
+&sata_phy0 {
+ status = "okay";
+};
+
+&sata_phy1 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+/*
+ * By default the sd slot is functional. For emmc to work add "<&emmc_sel>"
+ * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the
+ * bus-width property here and disable the nand node with status = "disabled";.
+ *
+ * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>;
+ */
+&sdio {
+ bus-width = <4>;
+ no-1-8-v;
+ status = "ok";
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ label = "port0";
+ reg = <0>;
+ };
+
+ port@1 {
+ label = "port1";
+ reg = <1>;
+ };
+
+ port@2 {
+ label = "port2";
+ reg = <2>;
+ };
+
+ port@3 {
+ label = "port3";
+ reg = <3>;
+ };
+
+ port@4 {
+ label = "port4";
+ reg = <4>;
+ };
+
+ port@5 {
+ ethernet = <&amac0>;
+ label = "cpu";
+ reg = <5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
status = "okay";
};
+&amac1 {
+ status = "okay";
+};
+
+&amac2 {
+ status = "okay";
+};
+
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
};
};
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@a0000 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
+};
+
&sata_phy0 {
status = "okay";
};
};
};
};
+
+&vpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vpif_capture_pins>;
+ status = "okay";
+
+ /* VPIF capture port */
+ port {
+ vpif_ch0: endpoint@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+
+ vpif_ch1: endpoint@1 {
+ reg = <1>;
+ bus-width = <8>;
+ data-shift = <8>;
+ };
+ };
+};
/dts-v1/;
#include "da850.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "DA850/AM1808/OMAP-L138 LCDK";
system-clock-frequency = <24576000>;
};
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ user1 {
+ label = "GPIO Key USER1";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+ };
+
+ user2 {
+ label = "GPIO Key USER2";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ vga-bridge {
+ compatible = "ti,ths8135";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ vga_bridge_in: endpoint {
+ remote-endpoint = <&lcdc_out_vga>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ vga_bridge_out: endpoint {
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ ddc-i2c-bus = <&i2c0>;
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_bridge_out>;
+ };
+ };
+ };
};
&pmx_core {
status = "okay";
};
+&usb1 {
+ status = "okay";
+};
+
&aemif {
pinctrl-names = "default";
pinctrl-0 = <&nand_pins>;
&memctrl {
status = "okay";
};
+
+&lcdc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ port {
+ lcdc_out_vga: endpoint {
+ remote-endpoint = <&vga_bridge_in>;
+ };
+ };
+};
+
+&vpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vpif_capture_pins>;
+ status = "okay";
+
+ /* VPIF capture port */
+ port {
+ vpif_ch0: endpoint {
+ bus-width = <8>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device tree for LEGO MINDSTORMS EV3
+ *
+ * Copyright (C) 2017 David Lechner <david@lechnology.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, version 2.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "da850.dtsi"
+
+/ {
+ compatible = "lego,ev3", "ti,da850";
+ model = "LEGO MINDSTORMS EV3";
+
+ aliases {
+ serial1 = &serial1;
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x04000000>;
+ };
+
+ /*
+ * The buttons on the EV3 are mapped to keyboard keys.
+ */
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ label = "EV3 Brick Buttons";
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>, <&button_bias>;
+
+ center {
+ label = "Center";
+ linux,code = <KEY_ENTER>;
+ gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ left {
+ label = "Left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpio 102 GPIO_ACTIVE_HIGH>;
+ };
+
+ back {
+ label = "Back";
+ linux,code = <KEY_BACKSPACE>;
+ gpios = <&gpio 106 GPIO_ACTIVE_HIGH>;
+ };
+
+ right {
+ label = "Right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpio 124 GPIO_ACTIVE_HIGH>;
+ };
+
+ down {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpio 126 GPIO_ACTIVE_HIGH>;
+ };
+
+ up {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ gpios = <&gpio 127 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ /*
+ * The EV3 has two built-in bi-color LEDs behind the buttons.
+ */
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ left_green {
+ label = "led0:green:brick-status";
+ /* GP6[13] */
+ gpios = <&gpio 103 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ right_red {
+ label = "led1:red:brick-status";
+ /* GP6[7] */
+ gpios = <&gpio 108 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ left_red {
+ label = "led0:red:brick-status";
+ /* GP6[12] */
+ gpios = <&gpio 109 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ right_green {
+ label = "led1:green:brick-status";
+ /* GP6[14] */
+ gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ /*
+ * The EV3 is powered down by turning off the main 5V supply.
+ */
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 107 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&system_power_pin>;
+ };
+
+ /*
+ * This is a 5V current limiting regulator that is shared by USB,
+ * the sensor (input) ports, the motor (output) ports and the A/DC.
+ */
+ vcc5v: regulator1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 101 0>;
+ over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&pmx_core {
+ status = "okay";
+
+ spi0_cs3_pin: pinmux_spi0_cs3_pin {
+ pinctrl-single,bits = <
+ /* CS3 */
+ 0xc 0x01000000 0x0f000000
+ >;
+ };
+
+ mmc0_cd_pin: pinmux_mmc0_cd {
+ pinctrl-single,bits = <
+ /* GP5[14] */
+ 0x2C 0x00000080 0x000000f0
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,bits = <
+ /* GP1[13] */
+ 0x8 0x00000800 0x00000f00
+ /* GP6[10] */
+ 0x34 0x00800000 0x00f00000
+ /* GP6[6] */
+ 0x38 0x00000080 0x000000f0
+ /* GP7[12], GP7[14], GP7[15] */
+ 0x40 0x00808800 0x00f0ff00
+ >;
+ };
+
+ led_pins: pinmux_led_pins {
+ pinctrl-single,bits = <
+ /* GP6[12], GP6[13], GP6[14] */
+ 0x34 0x00008880 0x0000fff0
+ /* GP6[7] */
+ 0x38 0x00000008 0x0000000f
+ >;
+ };
+
+ system_power_pin: pinmux_system_power {
+ pinctrl-single,bits = <
+ /* GP6[11] */
+ 0x34 0x00080000 0x000f0000
+ >;
+ };
+
+ vcc5v_pins: pinmux_vcc5v {
+ pinctrl-single,bits = <
+ /* GP6[5] */
+ 0x40 0x00000080 0x000000f0
+ /* GP6[3] */
+ 0x4c 0x00008000 0x0000f000
+ >;
+ };
+};
+
+&pinconf {
+ status = "okay";
+
+ /* Buttons have external pulldown resistors */
+ button_bias: button-bias-groups {
+ disable {
+ groups = "cp5", "cp24", "cp25", "cp28";
+ bias-disable;
+ };
+ };
+};
+
+/* Input port 1 */
+&serial1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial1_rxtx_pins>;
+};
+
+&rtc0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ /*
+ * EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC.
+ */
+ eeprom@50 {
+ compatible = "microchip,24c128";
+ pagesize = <64>;
+ read-only;
+ reg = <0x50>;
+ };
+};
+
+&wdt {
+ status = "okay";
+};
+
+&mmc0 {
+ status = "okay";
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin>;
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>, <&spi0_cs3_pin>;
+
+ flash@0 {
+ compatible = "n25q128a13", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ ti,spi-wdelay = <8>;
+
+ /* Partitions are based on the official firmware from LEGO */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x40000>;
+ };
+
+ partition@40000 {
+ label = "U-Boot Env";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "Kernel";
+ reg = <0x50000 0x200000>;
+ };
+
+ partition@250000 {
+ label = "Filesystem";
+ reg = <0x250000 0xa50000>;
+ };
+
+ partition@cb0000 {
+ label = "Storage";
+ reg = <0xcb0000 0x2f0000>;
+ };
+ };
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&vcc5v>;
+};
0x4c 0x02000022 0x0f0000ff
>;
};
-
+ vpif_capture_pins: vpif_capture_pins {
+ pinctrl-single,bits = <
+ /* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
+ 0x38 0x11111111 0xffffffff
+ /* VP_DIN[10..15,0..1] */
+ 0x3c 0x11111111 0xffffffff
+ /* VP_DIN[8..9] */
+ 0x40 0x00000011 0x000000ff
+ /* VP_CLKIN3, VP_CLKIN2 */
+ 0x4c 0x00010100 0x000f0f00
+ >;
+ };
};
prictrl: priority-controller@14110 {
compatible = "ti,da850-mstpri";
interrupt-names = "edm3_tcerrint";
};
serial0: serial@42000 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
reg = <0x42000 0x100>;
+ reg-io-width = <4>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
};
serial1: serial@10c000 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
reg = <0x10c000 0x100>;
+ reg-io-width = <4>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
};
serial2: serial@10d000 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
reg = <0x10d000 0x100>;
+ reg-io-width = <4>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
dma-names = "rx", "tx";
status = "disabled";
};
+ vpif: video@217000 {
+ compatible = "ti,da850-vpif";
+ reg = <0x217000 0x1000>;
+ interrupts = <92>;
+ status = "disabled";
+
+ /* VPIF capture port */
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
mmc1: mmc@21b000 {
compatible = "ti,da830-mmc";
reg = <0x21b000 0x1000>;
>;
status = "disabled";
};
+ usb1: usb@225000 {
+ compatible = "ti,da830-ohci";
+ reg = <0x225000 0x1000>;
+ interrupts = <59>;
+ phys = <&usb_phy 1>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ };
gpio: gpio@226000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
dma-names = "tx", "rx";
};
- display: display@213000 {
+ lcdc: display@213000 {
compatible = "ti,da850-tilcdc";
reg = <0x213000 0x1000>;
interrupts = <52>;
+ max-pixelclock = <37500>;
status = "disabled";
};
};
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
i2c0 = &i2c1;
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
i2c0 = &i2c1;
* published by the Free Software Foundation; version 2 of the
* License.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; version 2 of the
* License.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
};
+ chosen {
+ stdout-path = &uart1;
+ };
+
evm_3v3_sd: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "evm_3v3_sd";
};
&dra7_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <&vtt_pin>;
-
- vtt_pin: pinmux_vtt_pin {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
- >;
- };
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
- DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
- >;
- };
-
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
- DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
- >;
- };
-
- i2c3_pins: pinmux_i2c3_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
- DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
- >;
- };
-
- mcspi1_pins: pinmux_mcspi1_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
- DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
- DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
- DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
- DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
- DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
- >;
- };
-
- mcspi2_pins: pinmux_mcspi2_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
- DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
- DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
- DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
- >;
- };
-
- uart1_pins: pinmux_uart1_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
- DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
- DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
- DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
- >;
- };
-
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
- DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
- DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
- DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
- DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
- >;
- };
-
- usb1_pins: pinmux_usb1_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
- >;
- };
-
- usb2_pins: pinmux_usb2_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
- >;
- };
-
- nand_flash_x16: nand_flash_x16 {
- /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
- * So NAND flash requires following switch settings:
- * SW5.1 (NAND_BOOTn) = ON (LOW)
- * SW5.9 (GPMC_WPN) = OFF (HIGH)
- */
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
- DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
- DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
- DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
- DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
- DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
- DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
- DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
- DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
- DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
- DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
- DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
- DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
- DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
- DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
- DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
- DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
- DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
- DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
- DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
- DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
- DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
- >;
- };
-
- cpsw_default: cpsw_default {
- pinctrl-single,pins = <
- /* Slave 1 */
- DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
- DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
- DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
- DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
- DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
- DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
- DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
- DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
- DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
- DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
- DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
- DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
-
- /* Slave 2 */
- DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
- DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
- DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
- DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
- DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
- DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
- DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
- DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
- DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
- DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
- DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
- DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
- >;
-
- };
-
- cpsw_sleep: cpsw_sleep {
- pinctrl-single,pins = <
- /* Slave 1 */
- DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
-
- /* Slave 2 */
- DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
- >;
- };
-
- davinci_mdio_default: davinci_mdio_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
- DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
- >;
- };
-
- davinci_mdio_sleep: davinci_mdio_sleep {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
- >;
- };
-
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
>;
};
- atl_pins: pinmux_atl_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
- DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
- >;
- };
-
- mcasp3_pins: pinmux_mcasp3_pins {
+ mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
- DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
- DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
- DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
- mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+ mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
- DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
};
&i2c1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
tps659038: tps659038@58 {
&i2c2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
pcf_hdmi: gpio@26 {
&i2c3 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
};
&mcspi1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi1_pins>;
};
&mcspi2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi2_pins>;
};
&uart1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x3e0>;
};
&uart2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
};
&uart3 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
};
&mmc1 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&evm_3v3_sd>;
vmmc_aux-supply = <&ldo1_reg>;
bus-width = <4>;
&mmc2 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&evm_3v3_sw>;
bus-width = <8>;
};
&usb1 {
dr_mode = "peripheral";
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_pins>;
};
&usb2 {
dr_mode = "host";
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_pins>;
};
&elm {
};
&gpmc {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&nand_flash_x16>;
+ /*
+ * For the existing IOdelay configuration via U-Boot we don't
+ * support NAND on dra7-evm. Keep it disabled. Enabling it
+ * requires a different configuration by U-Boot.
+ */
+ status = "disabled";
ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
compatible = "ti,omap2-nand";
&mac {
status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cpsw_default>;
- pinctrl-1 = <&cpsw_sleep>;
dual_emac;
};
dual_emac_res_vlan = <2>;
};
-&davinci_mdio {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&davinci_mdio_default>;
- pinctrl-1 = <&davinci_mdio_sleep>;
-};
-
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep", "active";
};
&atl {
- pinctrl-names = "default";
- pinctrl-0 = <&atl_pins>;
-
assigned-clocks = <&abe_dpll_sys_clk_mux>,
<&atl_gfclk_mux>,
<&dpll_abe_ck>,
&mcasp3 {
#sound-dai-cells = <0>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mcasp3_pins>;
- pinctrl-1 = <&mcasp3_sleep_pins>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&atl_clkin2_ck>;
compatible = "ti,dra7xx";
interrupt-parent = <&crossbar_mpu>;
+ chosen { };
aliases {
i2c0 = &i2c1;
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0 0x48211000 0x0 0x1000>,
- <0x0 0x48212000 0x0 0x1000>,
+ <0x0 0x48212000 0x0 0x2000>,
<0x0 0x48214000 0x0 0x2000>,
<0x0 0x48216000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
};
+&pcf_lcd {
+ interrupt-parent = <&gpio7>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
&pcf_gpio_21 {
interrupt-parent = <&gpio7>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
display0 = &hdmi0;
};
+ chosen {
+ stdout-path = &uart1;
+ };
+
evm_12v0: fixedregulator-evm12v0 {
/* main supply */
compatible = "regulator-fixed";
status = "okay";
clock-frequency = <400000>;
+ pcf_lcd: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
pcf_gpio_21: gpio@21 {
compatible = "ti,pcf8575", "nxp,pcf8575";
reg = <0x21>;
};
&gpmc {
- status = "okay";
+ /*
+ * For the existing IOdelay configuration via U-Boot we don't
+ * support NAND on dra72-evm. Keep it disabled. Enabling it
+ * requires a different configuration by U-Boot.
+ */
+ status = "disabled";
ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
/* To use NAND, DIP switch SW5 must be set like so:
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,min-output-impedance;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
};
dp83867_1: ethernet-phy@3 {
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
- ti,min-output-imepdance;
+ ti,min-output-impedance;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
};
};
ti,palmas-long-press-seconds = <6>;
};
};
+
+&usb2_phy1 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&dss {
+ vdda_video-supply = <&ldo5_reg>;
+};
+
+&mmc1 {
+ vmmc_aux-supply = <&ldo1_reg>;
+};
interrupt-controller;
interrupts = <1 9 0xf04>;
reg = <0xfff11000 0x1000>,
- <0xfff12000 0x1000>,
+ <0xfff12000 0x2000>,
<0xfff14000 0x2000>,
<0xfff16000 0x2000>;
};
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x10481000 0x1000>,
- <0x10482000 0x1000>,
+ <0x10482000 0x2000>,
<0x10484000 0x2000>,
<0x10486000 0x2000>;
interrupts = <GIC_PPI 9
};
gic: interrupt-controller@10481000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ compatible = "arm,gic-400", "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x10481000 0x1000>,
- <0x10482000 0x1000>,
+ <0x10482000 0x2000>,
<0x10484000 0x2000>,
<0x10486000 0x2000>;
interrupts = <GIC_PPI 9
#size-cells = <0>;
interrupt-controller;
reg = <0x10481000 0x1000>,
- <0x10482000 0x1000>,
+ <0x10482000 0x2000>,
<0x10484000 0x2000>,
<0x10486000 0x2000>;
interrupts = <GIC_PPI 9
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x2E1000 0x1000>,
- <0x2E2000 0x1000>,
+ <0x2E2000 0x2000>,
<0x2E4000 0x2000>,
<0x2E6000 0x2000>;
interrupts = <GIC_PPI 9
&cspi1 {
pinctrl-0 = <&pinctrl_cspi1>;
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
status = "okay";
};
#size-cells = <0>;
#address-cells = <1>;
- cpu: cpu@0 {
+ cpu@0 {
device_type = "cpu";
+ reg = <0>;
compatible = "arm,arm920t";
operating-points = <200000 1900000>;
clock-latency = <62500>;
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
reg = <0x53ffc000 0x4000>;
clocks = <&clks 81>;
clock-names = "ipg";
- interrupts = <25>;
+ interrupts = <25 56>;
};
};
};
&cspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
};
&cspi2 {
- fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
<&gpio4 27 GPIO_ACTIVE_LOW>,
<&gpio2 17 GPIO_ACTIVE_LOW>;
&cspi1 {
pinctrl-0 = <&pinctrl_cspi1>;
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
status = "okay";
&cspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cspi2>;
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&cspi1 {
- fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
<&gpio4 27 GPIO_ACTIVE_HIGH>;
status = "okay";
&cspi1 {
pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
- fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
<&gpio4 27 GPIO_ACTIVE_LOW>;
};
&cspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cspi1>;
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
status = "okay";
cpu: cpu@0 {
device_type = "cpu";
+ reg = <0>;
compatible = "arm,arm926ej-s";
operating-points = <
/* kHz uV */
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0>;
};
};
};
saif0: saif@80042000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,imx28-saif";
reg = <0x80042000 0x2000>;
interrupts = <59>;
};
saif1: saif@80046000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,imx28-saif";
reg = <0x80046000 0x2000>;
interrupts = <58>;
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm1136jf-s";
device_type = "cpu";
+ reg = <0>;
};
};
- avic: avic-interrupt-controller@60000000 {
+ avic: interrupt-controller@68000000 {
compatible = "fsl,imx31-avic", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
- reg = <0x60000000 0x100000>;
+ reg = <0x68000000 0x100000>;
};
soc {
};
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm1136jf-s";
device_type = "cpu";
+ reg = <0>;
};
};
&cspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cspi>;
- fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
status = "okay";
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
<&gpio4 25 GPIO_ACTIVE_HIGH>;
status = "okay";
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
<&gpio3 27 GPIO_ACTIVE_LOW>;
status = "okay";
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
<&gpio4 25 GPIO_ACTIVE_LOW>;
status = "okay";
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
status = "okay";
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
status = "okay";
pinctrl_fec: fecgrp {
fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ MX53_PAD_FEC_MDC__FEC_MDC 0x4
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
>;
};
ldo7_reg: ldo7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
- regulator-always-on;
};
ldo8_reg: ldo8 {
};
};
};
+
+&tve {
+ dac-supply = <&ldo7_reg>;
+};
regulator-name = "VDAC";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2775000>;
- regulator-boot-on;
- regulator-always-on;
};
vgen1_reg: vgen1 {
};
};
};
+
+&tve {
+ dac-supply = <&vdac_reg>;
+};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <4>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
<&gpio3 24 0>, <&gpio3 25 0>;
status = "disabled";
&cspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cspi>;
- fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
<&gpio1 21 0>;
status = "disabled";
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <2>;
status = "okay";
cs-gpios = <
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <4>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
status = "okay";
};
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi2 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
--- /dev/null
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
+ compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
+};
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
--- /dev/null
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+ model = "Poslab SavageBoard Dual";
+ compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl";
+};
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi5 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-out;
+ spdif-in;
+ };
};
&cpu0 {
};
&ecspi1 {
- fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
>;
};
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
+ MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+ >;
+ };
+
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
status = "okay";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif>;
+ status = "okay";
+};
+
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
&ecspi5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5>;
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio1 12 0>;
status = "okay";
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
};
&ecspi3 {
- fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
<&gpio4 25 GPIO_ACTIVE_LOW>,
<&gpio4 26 GPIO_ACTIVE_LOW>;
};
&ecspi5 {
- fsl,spi-num-chipselects = <4>;
cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
<&gpio1 13 GPIO_ACTIVE_LOW>,
<&gpio1 12 GPIO_ACTIVE_LOW>,
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
#include "imx6qdl-icore-rqs.dtsi"
/ {
- model = "Engicam i.CoreM6 Quad SOM";
+ model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
sound {
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
- fsl,spi-num-chipselects = <1>;
status = "okay";
m25p80@0 {
--- /dev/null
+/*
+ * Copyright 2016-2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Liebherr (LWN) monitor6 i.MX6 Quad Board";
+ compatible = "lwn,mccmon6", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ backlight_lvds: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100 101 102 103 104 105 106 107 108 109
+ 110 111 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127 128 129
+ 130 131 132 133 134 135 136 137 138 139
+ 140 141 142 143 144 145 146 147 148 149
+ 150 151 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167 168 169
+ 170 171 172 173 174 175 176 177 178 179
+ 180 181 182 183 184 185 186 187 188 189
+ 190 191 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207 208 209
+ 210 211 212 213 214 215 216 217 218 219
+ 220 221 222 223 224 225 226 227 228 229
+ 230 231 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247 248 249
+ 250 251 252 253 254 255>;
+ default-brightness-level = <50>;
+ enable-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_lvds: regulator-lvds {
+ compatible = "regulator-fixed";
+ regulator-name = "lvds_ppen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lvds>;
+ gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ panel-lvds0 {
+ compatible = "innolux,g121x1-l03";
+ backlight = <&backlight_lvds>;
+ power-supply = <®_lvds>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&ecspi3 {
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+ status = "okay";
+
+ s25sl032p: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pfuze100: pmic@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+ };
+};
+
+&pwm2 {
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&weim {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+ ranges = <0 0 0x08000000 0x08000000>;
+ status = "okay";
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ use-advanced-sector-protection;
+ fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+ 0x0000c000 0x1404a38e 0x00000000>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_backlight: dispgrp {
+ fsl,pins = <
+ /* BLEN_OUT */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi3_cs: ecspi3csgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000
+ >;
+ };
+
+ pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_reg_lvds: reqlvdsgrp {
+ fsl,pins = <
+ /* LVDS_PPEN_OUT */
+ MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059
+ >;
+ };
+
+ pinctrl_weim_cs0: weimcs0grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+ >;
+ };
+
+ pinctrl_weim_nor: weimnorgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+ MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
+ MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+ MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+ MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+ MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+ MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+ MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+ MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+ MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+ MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+ MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+ MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+ MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+ MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+ MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+ MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+ MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+ MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+ MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+ MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+ MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+ MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+ MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+ MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+ MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+ MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+ MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+ MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+ MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+ MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+ MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+ MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+ MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+ MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+ MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+ MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+ MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+ MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+ MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+ MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+ MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+ MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+ >;
+ };
+};
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3_novena>;
- fsl,spi-num-chipselects = <3>;
status = "okay";
};
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
--- /dev/null
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+ model = "Poslab SavageBoard Quad";
+ compatible = "poslab,imx6q-savageboard", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
rtc1 = &snvs_rtc;
};
+ encoder {
+ compatible = "ti,tfp410";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <¶llel_display_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
};
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+
+ type = "a";
+ ddc-i2c-bus = <&i2c_dvi_ddc>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
i2cmux {
compatible = "i2c-mux-gpio";
pinctrl-names = "default";
#size-cells = <0>;
};
};
+
+ parallel-display {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1>;
+
+ interface-pix-fmt = "rgb24";
+
+ port@0 {
+ reg = <0>;
+
+ parallel_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ parallel_display_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ };
+ };
+ };
};
+/*
+ * A single IPU is not able to drive both display interfaces available on the
+ * Utilite Pro at high resolution due to its bandwidth limitation. Since the
+ * tfp410 encoder is wired up to IPU1, sever the link between IPU1 and the
+ * SoC-internal Designware HDMI encoder forcing the latter to be connected to
+ * IPU2 instead of IPU1.
+ */
+/delete-node/&ipu1_di0_hdmi;
+/delete-node/&hdmi_mux_0;
+/delete-node/&ipu1_di1_hdmi;
+/delete-node/&hdmi_mux_1;
+
&hdmi {
ddc-i2c-bus = <&i2c2>;
status = "okay";
>;
};
+ pinctrl_ipu1: ipu1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <¶llel_display_in>;
+};
+
&pcie {
pcie@0,0 {
reg = <0x000000 0 0 0 0>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
/* Apalis SPI1 */
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
/* Apalis SPI2 */
&ecspi2 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
<&gpio4 10 GPIO_ACTIVE_LOW>,
<&gpio4 11 GPIO_ACTIVE_LOW>;
};
&ecspi4 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 20 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi1 {
- fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
&gpio4 10 GPIO_ACTIVE_HIGH
&gpio4 11 GPIO_ACTIVE_HIGH>;
};
&ecspi2 {
- fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
};
&ecspi4 {
- fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
/* Colibri SSP */
&ecspi4 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi3 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 24 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- reg_5p0v: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "5P0V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_5p0v: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- reg_usb_otg_vbus: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ /* VDD_SOC (1+R1/R2 = 1.635) */
+ reg_vdd_soc: sw1 {
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+ reg_1p8v: sw2 {
+ regulator-name = "vdd1p8";
+ regulator-min-microvolt = <1033310>;
+ regulator-max-microvolt = <2004000>;
+ lltc,fb-voltage-divider = <301000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_ARM (1+R1/R2 = 1.635) */
+ reg_vdd_arm: sw3 {
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_DDR (1+R1/R2 = 2.105) */
+ reg_vdd_ddr: sw4 {
+ regulator-name = "vddddr";
+ regulator-min-microvolt = <868310>;
+ regulator-max-microvolt = <1684000>;
+ lltc,fb-voltage-divider = <221000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+ reg_2p5v: ldo2 {
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2490375>;
+ regulator-max-microvolt = <2490375>;
+ lltc,fb-voltage-divider = <487000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_HIGH (1+R1/R2 = 4.17) */
+ reg_3p0v: ldo4 {
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <3023250>;
+ regulator-max-microvolt = <3023250>;
+ lltc,fb-voltage-divider = <634000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&i2c3 {
>;
};
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
+
pinctrl_pps: ppsgrp {
fsl,pins = <
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
status = "okay";
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_1p0v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "1P0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- /* remove this fixed regulator once ltc3676__sw2 driver available */
- reg_1p8v: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "1P8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ reg_1p0v: regulator-1p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- reg_3p3v: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- reg_5p0v: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "5P0V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_5p0v: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- reg_usb_otg_vbus: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
sound {
};
&ecspi3 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ /* VDD_SOC (1+R1/R2 = 1.635) */
+ reg_vdd_soc: sw1 {
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+ reg_1p8v: sw2 {
+ regulator-name = "vdd1p8";
+ regulator-min-microvolt = <1033310>;
+ regulator-max-microvolt = <2004000>;
+ lltc,fb-voltage-divider = <301000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_ARM (1+R1/R2 = 1.635) */
+ reg_vdd_arm: sw3 {
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_DDR (1+R1/R2 = 2.105) */
+ reg_vdd_ddr: sw4 {
+ regulator-name = "vddddr";
+ regulator-min-microvolt = <868310>;
+ regulator-max-microvolt = <1684000>;
+ lltc,fb-voltage-divider = <221000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+ reg_2p5v: ldo2 {
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2490375>;
+ regulator-max-microvolt = <2490375>;
+ lltc,fb-voltage-divider = <487000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_AUD_1P8: Audio codec */
+ reg_aud_1p8v: ldo3 {
+ regulator-name = "vdd1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ /* VDD_HIGH (1+R1/R2 = 4.17) */
+ reg_3p0v: ldo4 {
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <3023250>;
+ regulator-max-microvolt = <3023250>;
+ lltc,fb-voltage-divider = <634000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&i2c3 {
>;
};
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
+
pinctrl_pps: ppsgrp {
fsl,pins = <
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
status = "okay";
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_1p0v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "1P0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- /* remove when pmic 1p8 regulator available */
- reg_1p8v: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "1P8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ reg_1p0v: regulator-1p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- reg_3p3v: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- reg_usb_h1_vbus: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- reg_usb_otg_vbus: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
sound {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ reg = <0x3c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ /* VDD_SOC (1+R1/R2 = 1.635) */
+ reg_vdd_soc: sw1 {
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+ reg_1p8v: sw2 {
+ regulator-name = "vdd1p8";
+ regulator-min-microvolt = <1033310>;
+ regulator-max-microvolt = <2004000>;
+ lltc,fb-voltage-divider = <301000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_ARM (1+R1/R2 = 1.635) */
+ reg_vdd_arm: sw3 {
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_DDR (1+R1/R2 = 2.105) */
+ reg_vdd_ddr: sw4 {
+ regulator-name = "vddddr";
+ regulator-min-microvolt = <868310>;
+ regulator-max-microvolt = <1684000>;
+ lltc,fb-voltage-divider = <221000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+ reg_2p5v: ldo2 {
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2490375>;
+ regulator-max-microvolt = <2490375>;
+ lltc,fb-voltage-divider = <487000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_AUD_1P8: Audio codec */
+ reg_aud_1p8v: ldo3 {
+ regulator-name = "vdd1p8a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ /* VDD_HIGH (1+R1/R2 = 4.17) */
+ reg_3p0v: ldo4 {
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <3023250>;
+ regulator-max-microvolt = <3023250>;
+ lltc,fb-voltage-divider = <634000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&i2c3 {
>;
};
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
+
pinctrl_pps: ppsgrp {
fsl,pins = <
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
};
+&ecspi2 {
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
>;
};
+ pinctrl_ecspi2: escpi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1
+ >;
+ };
+
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
reg = <0x10000000 0x20000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_5p0v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "5P0V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
+ reg_5p0v: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
- reg_usb_h1_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
- reg_usb_otg_vbus: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ /* VDD_SOC (1+R1/R2 = 1.635) */
+ reg_vdd_soc: sw1 {
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_DDR (1+R1/R2 = 2.105) */
+ reg_vdd_ddr: sw2 {
+ regulator-name = "vddddr";
+ regulator-min-microvolt = <868310>;
+ regulator-max-microvolt = <1684000>;
+ lltc,fb-voltage-divider = <221000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_ARM (1+R1/R2 = 1.635) */
+ reg_vdd_arm: sw3 {
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_3P3 (1+R1/R2 = 1.281) */
+ reg_3p3: sw4 {
+ regulator-name = "vdd3p3";
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <3647000>;
+ lltc,fb-voltage-divider = <200000 56200>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
+ reg_1p8a: ldo2 {
+ regulator-name = "vdd1p8a";
+ regulator-min-microvolt = <1816125>;
+ regulator-max-microvolt = <1816125>;
+ lltc,fb-voltage-divider = <301000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8b: HDMI In analog */
+ reg_1p8b: ldo3 {
+ regulator-name = "vdd1p8b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ /* VDD_HIGH (1+R1/R2 = 4.17) */
+ reg_3p0: ldo4 {
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <3023250>;
+ regulator-max-microvolt = <3023250>;
+ lltc,fb-voltage-divider = <634000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&i2c3 {
>;
};
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
+
pinctrl_pwm2: pwm2grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
reg = <0x10000000 0x20000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_1p0v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "1P0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
+ reg_1p0v: regulator-1p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- reg_3p3v: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- reg_5p0v: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "5P0V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_5p0v: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
};
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ /* VDD_SOC (1+R1/R2 = 1.635) */
+ reg_vdd_soc: sw1 {
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
+ reg_1p8v: sw2 {
+ regulator-name = "vdd1p8";
+ regulator-min-microvolt = <1033310>;
+ regulator-max-microvolt = <2004000>;
+ lltc,fb-voltage-divider = <301000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_ARM (1+R1/R2 = 1.635) */
+ reg_vdd_arm: sw3 {
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_DDR (1+R1/R2 = 2.105) */
+ reg_vdd_ddr: sw4 {
+ regulator-name = "vddddr";
+ regulator-min-microvolt = <868310>;
+ regulator-max-microvolt = <1684000>;
+ lltc,fb-voltage-divider = <221000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+ reg_2p5v: ldo2 {
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2490375>;
+ regulator-max-microvolt = <2490375>;
+ lltc,fb-voltage-divider = <487000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_HIGH (1+R1/R2 = 4.17) */
+ reg_3p0v: ldo4 {
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <3023250>;
+ regulator-max-microvolt = <3023250>;
+ lltc,fb-voltage-divider = <634000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&i2c3 {
>;
};
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
+
pinctrl_pwm2: pwm2grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
status = "okay";
};
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P0V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
reg_5p0v: regulator-5p0v {
compatible = "regulator-fixed";
regulator-name = "5P0V";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ /* VDD_SOC (1+R1/R2 = 1.635) */
+ reg_vdd_soc: sw1 {
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_DDR (1+R1/R2 = 2.105) */
+ reg_vdd_ddr: sw2 {
+ regulator-name = "vddddr";
+ regulator-min-microvolt = <868310>;
+ regulator-max-microvolt = <1684000>;
+ lltc,fb-voltage-divider = <221000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_ARM (1+R1/R2 = 1.635) */
+ reg_vdd_arm: sw3 {
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_3P3 (1+R1/R2 = 1.281) */
+ reg_3p3v: sw4 {
+ regulator-name = "vdd3p3";
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <3647000>;
+ lltc,fb-voltage-divider = <200000 56200>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */
+ reg_1p8a: ldo2 {
+ regulator-name = "vdd1p8a";
+ regulator-min-microvolt = <1816125>;
+ regulator-max-microvolt = <1816125>;
+ lltc,fb-voltage-divider = <301000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8b: microSD VDD_1P8 */
+ reg_1p8b: ldo3 {
+ regulator-name = "vdd1p8b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ /* VDD_HIGH (1+R1/R2 = 4.17) */
+ reg_3p0v: ldo4 {
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <3023250>;
+ regulator-max-microvolt = <3023250>;
+ lltc,fb-voltage-divider = <634000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&i2c3 {
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
- vmmc-supply = <®_3p3v>;
status = "okay";
};
>;
};
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
+ >;
+ };
+
pinctrl_pps: ppsgrp {
fsl,pins = <
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
vmcc-supply = <®_sd3_vmmc>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- bus-witdh=<4>;
+ bus-witdh = <4>;
no-1-8-v;
status = "okay";
};
pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
vmcc-supply = <®_sd4_vmmc>;
- bus-witdh=<8>;
+ bus-witdh = <8>;
no-1-8-v;
non-removable;
status = "okay";
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
status = "okay";
port@4 {
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
status = "okay";
port@4 {
};
lvds-channel@1 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
status = "okay";
port@4 {
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
status = "okay";
port@4 {
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
>;
};
status = "okay";
lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
status = "okay";
port@4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 24 0>;
flash@0 {
};
&ecspi2 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
};
&ecspi3 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
status = "okay";
port@4 {
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 9 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
--- /dev/null
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ panel {
+ compatible = "avic,tm097tdh02", "hannstar,hsd100pxn1";
+ backlight = <&panel_bl>;
+ power-supply = <®_3p3v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ panel_bl: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <4>;
+ power-supply = <®_3p3v>;
+ pwms = <&pwm1 0 10000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ reg = <0>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+/* SD card */
+&usdhc3 {
+ bus-width = <4>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc4 {
+ bus-width = <8>;
+ keep-power-in-suspend;
+ no-1-8-v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_emmc: emmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ /* PHY reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_sd: sdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ /* CD pin */
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+};
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
};
&ecspi2 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- fsl,spi-num-chipselects = <2>;
cs-gpios = <
&gpio2 30 GPIO_ACTIVE_HIGH
&gpio3 19 GPIO_ACTIVE_HIGH
regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1375000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
regulator-always-on;
anatop-reg-offset = <0x110>;
anatop-vol-bit-shift = <8>;
regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
- regulator-min-microvolt = <2000000>;
+ regulator-min-microvolt = <2250000>;
regulator-max-microvolt = <2750000>;
regulator-always-on;
anatop-reg-offset = <0x130>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
- anatop-min-voltage = <2000000>;
- anatop-max-voltage = <2750000>;
+ anatop-min-voltage = <2100000>;
+ anatop-max-voltage = <2875000>;
};
reg_arm: regulator-vddcore {
reg = <0x020e0000 0x4000>;
};
- ldb: ldb@020e0008 {
+ ldb: ldb {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
};
ocotp: ocotp@021bc000 {
};
};
+&fec {
+ /delete-property/interrupts-extended;
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+ <0 119 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&ldb {
clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
<&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 11 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
reg = <0x021b8000 0x4000>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
};
ocotp: ocotp@021bc000 {
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
&ecspi1 {
- fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
+
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_otg1_reg>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_otg2_reg>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan: regulator-wlan {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ reg_bt: regulator-bt {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt_reg>;
+ enable-active-high;
+ gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ regulator-name = "bt_reg";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
};
&cpu0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
+ phy-reset-duration = <10>;
phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
};
&iomuxc {
+ pinctrl_bt_reg: btreggrp {
+ fsl,pins =
+ <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>;
+ };
+
pinctrl_enet1: enet1grp {
fsl,pins =
<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>,
<MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>;
};
+ pinctrl_uart3: uart3grp {
+ fsl,pins =
+ <MX6SX_PAD_SD3_DATA4__UART3_RX 0x13059>,
+ <MX6SX_PAD_SD3_DATA5__UART3_TX 0x13059>,
+ <MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x13059>,
+ <MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x13059>;
+ };
+
pinctrl_uart5: uart5grp {
fsl,pins =
<MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>,
<MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>;
};
+ pinctrl_otg1_reg: otg1grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>;
+ };
+
+
+ pinctrl_otg2_reg: otg2grp {
+ fsl,pins =
+ <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>,
+ <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>;
+ };
+
+ pinctrl_usb_otg2: usbot2ggrp {
+ fsl,pins =
+ <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins =
<MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>,
<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>,
<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */
};
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins =
+ <MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x15059>,
+ <MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x13059>,
+ <MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17069>,
+ <MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17069>,
+ <MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17069>,
+ <MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17069>,
+ <MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17069>,
+ <MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10069>,
+ <MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x10059>;
+ };
};
&uart1 {
status = "disabled";
};
+&uart3 { /* Bluetooth */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
/* Arduino serial */
&uart5 {
pinctrl-names = "default";
status = "disabled";
};
+&usbotg1 { /* J2 micro USB port */
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ status = "okay";
+};
+
+&usbotg2 { /* J3 host USB port */
+ vbus-supply = <®_usb_otg2_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg2>;
+ dr_mode = "host";
+ status = "okay";
+};
+
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
wakeup-source;
status = "okay";
};
+
+&usdhc3 { /* Wi-Fi */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ non-removable;
+ vmmc-supply = <®_wlan>;
+ cap-power-off-card;
+ wakeup-source;
+ keep-power-in-suspend;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1831";
+ reg = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+ ref-clock-frequency = <38400000>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
};
ocotp: ocotp@021bc000 {
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
--- /dev/null
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-isiot.dtsi"
+
+/ {
+ model = "Engicam Is.IoT MX6UL eMMC Starter kit";
+ compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ bus-width = <8>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
+ MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
+ >;
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-isiot.dtsi"
+
+/ {
+ model = "Engicam Is.IoT MX6UL NAND Starter kit";
+ compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_gpmi_nand: gpmi-nand {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
+ >;
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+};
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
--- /dev/null
+/*
+ * Copyright 2017 Armadeus Systems <support@armadeus.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul.dtsi"
+
+/ {
+ memory {
+ reg = <0x80000000 0>; /* will be filled by U-Boot */
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ usdhc3_pwrseq: usdhc3-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-reset-duration = <1>;
+ phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ phy-handle = <ðphy1>;
+ phy-supply = <®_3v3>;
+ status = "okay";
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
+ };
+ };
+};
+
+/* Bluetooth */
+&uart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ status = "okay";
+};
+
+/* WiFi */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcmf: bcrmf@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ /* INT# */
+ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
+ /* RST# */
+ MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_uart8: uart8grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
+ /* BT_REG_ON */
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
+ MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
+ MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
+ MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
+ MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
+ MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
+ MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
+ MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
+ MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
+ /* WL_REG_ON */
+ MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
+ /* WL_IRQ */
+ MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
+ >;
+ };
+};
--- /dev/null
+/*
+ * Copyright 2017 Armadeus Systems <support@armadeus.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul-opos6ul.dtsi"
+
+/ {
+ model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
+ compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 191000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_5v>;
+ status = "okay";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ user-button {
+ label = "User button";
+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user-led {
+ label = "User";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+ gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ onewire {
+ compatible = "w1-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_w1>;
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbotg1_vbus: regulator-usbotg1vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbotg1vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usbotg2_vbus: regulator-usbotg2vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbotg2vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2_vbus>;
+ gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&adc1 {
+ vref-supply = <®_3v3>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_5v>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_5v>;
+ status = "okay";
+};
+
+&ecspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ spidev0: spi@0 {
+ compatible = "spidev";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ };
+
+ spidev1: spi@1 {
+ compatible = "spidev";
+ reg = <1>;
+ spi-max-frequency = <5000000>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock_frequency = <400000>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock_frequency = <400000>;
+ status = "okay";
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ display = <&display0>;
+ lcd-supply = <®_3v3>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <32>;
+ bus-width = <18>;
+
+ display-timings {
+ timing0: timing0 {
+ clock-frequency = <33000033>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <96>;
+ hfront-porch = <96>;
+ vback-porch = <20>;
+ vfront-porch = <21>;
+ hsync-len = <64>;
+ vsync-len = <4>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "disabled";
+};
+
+&tsc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ measure-delay-time = <0xffff>;
+ pre-charge-time = <0xffff>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_id>;
+ vbus-supply = <®_usbotg1_vbus>;
+ dr_mode = "otg";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usbotg2_vbus>;
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpios>;
+
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
+ MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
+ MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
+ MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
+ MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
+ >;
+ };
+
+ pinctrl_gpios: gpiosgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
+ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
+ MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
+ MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
+ MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
+ MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+ >;
+ };
+
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_tsc: tscgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1_id: usbotg1idgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg1_vbus: usbotg1vbusgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg2_vbus: usbotg2vbusgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_w1: w1grp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0
+ >;
+ };
+};
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- fsl,spi-num-chipselects = <2>;
cs-gpios = <
&gpio1 29 GPIO_ACTIVE_HIGH
&gpio1 10 GPIO_ACTIVE_HIGH
};
intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a7-gic";
+ compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
- <0x00a02000 0x1000>,
+ <0x00a02000 0x2000>,
<0x00a04000 0x2000>,
<0x00a06000 0x2000>;
};
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
- anatop-enable-bit = <0>;
};
reg_arm: regulator-vddcore {
reg = <0x021b0000 0x4000>;
};
+ ocotp: ocotp-ctrl@021bc000 {
+ compatible = "fsl,imx6ul-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6UL_CLK_OCOTP>;
+ };
+
lcdif: lcdif@021c8000 {
compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
reg = <0x021c8000 0x4000>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
pinctrl_gpio_lpsr: gpio1-grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x59
- MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x59
- MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x59
+ MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x59
+ MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59
+ MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59
>;
};
pinctrl_i2c1: i2c1-grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f
- MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f
+ MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f
+ MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x4000007f
>;
};
pinctrl_cd_usdhc1: usdhc1-cd-grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */
+ MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */
>;
};
pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */
- MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */
+ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */
+ MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */
>;
};
};
>;
};
- pinctrl_usbotg1: usbotg1grp {
- fsl,pins = <
- MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */
- >;
- };
-
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
>;
};
};
+
+&iomuxc_lpsr {
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */
+ >;
+ };
+};
\ No newline at end of file
pinctrl_hog_2: hoggrp-2 {
fsl,pins = <
- MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x7d
- MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d
+ MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x7d
+ MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d
>;
};
pinctrl_backlight_j9: backlightj9grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x7d
+ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x7d
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x7d
+ MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x7d
>;
};
pinctrl_usbotg1: usbotg1grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x7d
- MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14
+ MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x7d
+ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14
>;
};
pinctrl_wdog1: wdog1grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x75
+ MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x75
>;
};
};
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
-#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0
-#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0
-#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0
-#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0
-#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3
-#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0
-#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3
-#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3
-#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0
-#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3
-#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1
-#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1
-#define MX7D_PAD_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4
-#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2
-#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1
-#define MX7D_PAD_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5
-#define MX7D_PAD_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2
-#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0
-#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1
-#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1
-#define MX7D_PAD_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4
-#define MX7D_PAD_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2
-#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0
-#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1
-#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0
-#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0
-#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1
-#define MX7D_PAD_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0
-#define MX7D_PAD_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5
-#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2
-#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0
-#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4
+#define MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5
+#define MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1
#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x0014 0x026C 0x0000 0x0 0x0
#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x0014 0x026C 0x0000 0x1 0x0
#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0014 0x026C 0x0000 0x2 0x0
};
&ecspi3 {
- fsl,spi-num-chipselects = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
>;
};
- pinctrl_pwm1: pwm1grp {
- fsl,pins = <
- MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x110b0
- >;
- };
-
pinctrl_tsc2046_pendown: tsc2046_pendown {
fsl,pins = <
MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
>;
};
+ };
+};
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74
- >;
- };
+&iomuxc_lpsr {
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0
+ >;
};
};
MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1b
>;
};
+};
+&iomuxc_lpsr {
pinctrl_wdog: wdoggrp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74
+ MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74
>;
};
};
anatop-min-bit-val = <8>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1200000>;
- anatop-enable-bit = <31>;
};
};
/* NetCP address range */
ranges = <0 0x24000000 0x1000000>;
- clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+ clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
+ clock-names = "pa_clk", "ethss_clk", "cpts";
dma-coherent;
ti,navigator-dmas = <&dma_gbe 0>,
* published by the Free Software Foundation.
*/
+#include <dt-bindings/reset/ti-syscon.h>
+
/ {
compatible = "ti,k2e", "ti,keystone";
model = "Texas Instruments Keystone 2 Edison SoC";
};
};
+ msm_ram: msmram@0c000000 {
+ compatible = "mmio-sram";
+ reg = <0x0c000000 0x200000>;
+ ranges = <0x0 0x0c000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sram-bm@1f0000 {
+ reg = <0x001f0000 0x8000>;
+ };
+ };
+
+ psc: power-sleep-controller@02350000 {
+ pscrst: reset-controller {
+ compatible = "ti,k2e-pscrst", "ti,syscon-reset";
+ #reset-cells = <1>;
+
+ ti,reset-bits = <
+ 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+ >;
+ };
+ };
+
dspgpio0: keystone_dsp_gpio@02620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
};
gic: interrupt-controller@02561000 {
- compatible = "arm,cortex-a15-gic";
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x02561000 0x0 0x1000>,
<0x0 0x02562000 0x0 0x2000>,
- <0x0 0x02564000 0x0 0x1000>,
+ <0x0 0x02564000 0x0 0x2000>,
<0x0 0x02566000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
ranges = <0x0 0x0 0x0 0xc0000000>;
dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
+ msm_ram: msmram@0c000000 {
+ compatible = "mmio-sram";
+ reg = <0x0c000000 0x100000>;
+ ranges = <0x0 0x0c000000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sram-bm@f7000 {
+ reg = <0x000f7000 0x8000>;
+ };
+ };
+
k2g_pinctrl: pinmux@02621000 {
compatible = "pinctrl-single";
reg = <0x02621000 0x410>;
};
uart0: serial@02530c00 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
/* NetCP address range */
ranges = <0 0x2000000 0x100000>;
- clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+ clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
+ clock-names = "pa_clk", "ethss_clk", "cpts";
dma-coherent;
ti,navigator-dmas = <&dma_gbe 22>,
* published by the Free Software Foundation.
*/
+#include <dt-bindings/reset/ti-syscon.h>
+
/ {
compatible = "ti,k2hk", "ti,keystone";
model = "Texas Instruments Keystone 2 Kepler/Hawking SoC";
soc {
/include/ "keystone-k2hk-clocks.dtsi"
+ msm_ram: msmram@0c000000 {
+ compatible = "mmio-sram";
+ reg = <0x0c000000 0x600000>;
+ ranges = <0x0 0x0c000000 0x600000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sram-bm@5f0000 {
+ reg = <0x5f0000 0x8000>;
+ };
+ };
+
+ psc: power-sleep-controller@02350000 {
+ pscrst: reset-controller {
+ compatible = "ti,k2hk-pscrst", "ti,syscon-reset";
+ #reset-cells = <1>;
+
+ ti,reset-bits = <
+ 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+ 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
+ 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
+ 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
+ 0xa4c 8 0xa4c 8 0x84c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 4: dsp4 */
+ 0xa50 8 0xa50 8 0x850 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 5: dsp5 */
+ 0xa54 8 0xa54 8 0x854 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 6: dsp6 */
+ 0xa58 8 0xa58 8 0x858 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 7: dsp7 */
+ >;
+ };
+ };
+
dspgpio0: keystone_dsp_gpio@02620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
/* NetCP address range */
ranges = <0 0x26000000 0x1000000>;
- clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+ clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>;
+ clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk";
dma-coherent;
ti,navigator-dmas = <&dma_gbe 0>,
* published by the Free Software Foundation.
*/
+#include <dt-bindings/reset/ti-syscon.h>
+
/ {
compatible = "ti,k2l", "ti,keystone";
model = "Texas Instruments Keystone 2 Lamarr SoC";
/include/ "keystone-k2l-clocks.dtsi"
uart2: serial@02348400 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart3: serial@02348800 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
};
+ msm_ram: msmram@0c000000 {
+ compatible = "mmio-sram";
+ reg = <0x0c000000 0x200000>;
+ ranges = <0x0 0x0c000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sram-bm@1f8000 {
+ reg = <0x001f8000 0x8000>;
+ };
+ };
+
+ psc: power-sleep-controller@02350000 {
+ pscrst: reset-controller {
+ compatible = "ti,k2l-pscrst", "ti,syscon-reset";
+ #reset-cells = <1>;
+
+ ti,reset-bits = <
+ 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+ 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
+ 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
+ 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
+ >;
+ };
+ };
+
dspgpio0: keystone_dsp_gpio@02620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
};
gic: interrupt-controller {
- compatible = "arm,cortex-a15-gic";
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x02561000 0x0 0x1000>,
<0x0 0x02562000 0x0 0x2000>,
- <0x0 0x02564000 0x0 0x1000>,
+ <0x0 0x02564000 0x0 0x2000>,
<0x0 0x02566000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
reg = <0x02310000 0x200>;
};
+ psc: power-sleep-controller@02350000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x02350000 0x1000>;
+ };
+
devctrl: device-state-control@02620000 {
compatible = "ti,keystone-devctrl", "syscon";
reg = <0x02620000 0x1000>;
/include/ "keystone-clocks.dtsi"
uart0: serial@02530c00 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart1: serial@02531000 {
- compatible = "ns16550a";
+ compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
dsa {
+ status = "disabled";
+
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
&mdio {
status = "okay";
+
+ switch@0 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <ð0port>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
};
/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
};
dsa {
+ status = "disabled";
+
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
&mdio {
status = "okay";
+
+ switch@10 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <16>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "ethernet1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "ethernet2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "ethernet3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "ethernet4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "internet";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð0port>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
};
&uart0 {
};
dsa {
+ status = "disabled";
+
compatible = "marvell,dsa";
#address-cells = <1>;
#size-cells = <0>;
&mdio {
status = "okay";
+
+ switch@0 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð0port>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
};
ð0 {
model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
- dsa {
- switch@0 {
- reg = <10 0>; /* MDIO address 10, switch 0 in tree */
- };
- };
};
&mdio {
};
};
+&switch {
+ reg = <10>;
+};
+
ð1 {
status = "okay";
ð1 {
status = "disabled";
};
+
+&switch {
+ reg = <0>;
+
+ ports {
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+ };
+};
};
dsa {
+ status = "disabled";
+
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
&mdio {
status = "okay";
+
+ switch: switch@0 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð0port>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ };
+ };
};
ð0 {
ranges;
gic: interrupt-controller@1400000 {
- compatible = "arm,cortex-a7-gic";
+ compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x1401000 0x0 0x1000>,
- <0x0 0x1402000 0x0 0x1000>,
+ <0x0 0x1402000 0x0 0x2000>,
<0x0 0x1404000 0x0 0x2000>,
<0x0 0x1406000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
};
+&auxadc {
+ status = "okay";
+};
+
+&pio {
+ spi_pins_a: spi0@0 {
+ pins_spi {
+ pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
+ <MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK>,
+ <MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI>,
+ <MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO>;
+ bias-disable;
+ };
+ };
+
+ spi_pins_b: spi1@0 {
+ pins_spi {
+ pinmux = <MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS>,
+ <MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI>,
+ <MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO>,
+ <MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK>;
+ bias-disable;
+ };
+ };
+
+ spi_pins_c: spi2@0 {
+ pins_spi {
+ pinmux = <MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS>,
+ <MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI>,
+ <MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO>,
+ <MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK>;
+ bias-disable;
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_a>;
+ status = "disabled";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_b>;
+ status = "disabled";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_c>;
+ status = "disabled";
+};
+
&uart0 {
status = "okay";
};
*/
#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/mt2701-resets.h>
clock-output-names = "rtc32k";
};
+ thermal-zones {
+ cpu_thermal: cpu_thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+
+ thermal-sensors = <&thermal 0>;
+ sustainable-power = <1000>;
+
+ trips {
+ threshold: trip-point@0 {
+ temperature = <68000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ target: trip-point@1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit@0 {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- pio: pinctrl@10005000 {
- compatible = "mediatek,mt2701-pinctrl";
- reg = <0 0x1000b000 0 0x1000>;
- mediatek,pctl-regmap = <&syscfg_pctl_a>;
- pins-are-numbered;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- syscfg_pctl_a: syscfg@10005000 {
- compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
- reg = <0 0x10005000 0 0x1000>;
- };
-
topckgen: syscon@10000000 {
compatible = "mediatek,mt2701-topckgen", "syscon";
reg = <0 0x10000000 0 0x1000>;
#reset-cells = <1>;
};
+ syscfg_pctl_a: syscfg@10005000 {
+ compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
+ };
+
+ scpsys: scpsys@10006000 {
+ compatible = "mediatek,mt2701-scpsys", "syscon";
+ #power-domain-cells = <1>;
+ reg = <0 0x10006000 0 0x1000>;
+ infracfg = <&infracfg>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_MFG_SEL>,
+ <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "mm", "mfg", "ethif";
+ };
+
watchdog: watchdog@10007000 {
compatible = "mediatek,mt2701-wdt",
"mediatek,mt6589-wdt";
clock-names = "system-clk", "rtc-clk";
};
+ pio: pinctrl@1000b000 {
+ compatible = "mediatek,mt2701-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ smi_common: smi@1000c000 {
+ compatible = "mediatek,mt2701-smi-common";
+ reg = <0 0x1000c000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_SMI>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&infracfg CLK_INFRA_SMI>;
+ clock-names = "apb", "smi", "async";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
sysirq: interrupt-controller@10200100 {
compatible = "mediatek,mt2701-sysirq",
"mediatek,mt6577-sysirq";
reg = <0 0x10200100 0 0x1c>;
};
+ iommu: mmsys_iommu@10205000 {
+ compatible = "mediatek,mt2701-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb0 &larb1 &larb2>;
+ #iommu-cells = <1>;
+ };
+
apmixedsys: syscon@10209000 {
compatible = "mediatek,mt2701-apmixedsys", "syscon";
reg = <0 0x10209000 0 0x1000>;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
- <0 0x10212000 0 0x1000>,
+ <0 0x10212000 0 0x2000>,
<0 0x10214000 0 0x2000>,
<0 0x10216000 0 0x2000>;
};
+ auxadc: adc@11001000 {
+ compatible = "mediatek,mt2701-auxadc";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&pericfg CLK_PERI_AUXADC>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
uart0: serial@11002000 {
compatible = "mediatek,mt2701-uart",
"mediatek,mt6577-uart";
clock-names = "baud", "bus";
status = "disabled";
};
+
+ spi0: spi@1100a000 {
+ compatible = "mediatek,mt2701-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI0_SEL>,
+ <&pericfg CLK_PERI_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ thermal: thermal@1100b000 {
+ #thermal-sensor-cells = <0>;
+ compatible = "mediatek,mt2701-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+ clock-names = "therm", "auxadc";
+ resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
+ reset-names = "therm";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ };
+
+ nandc: nfi@1100d000 {
+ compatible = "mediatek,mt2701-nfc";
+ reg = <0 0x1100d000 0 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI>,
+ <&pericfg CLK_PERI_NFI_PAD>;
+ clock-names = "nfi_clk", "pad_clk";
+ status = "disabled";
+ ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ bch: ecc@1100e000 {
+ compatible = "mediatek,mt2701-ecc";
+ reg = <0 0x1100e000 0 0x1000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI_ECC>;
+ clock-names = "nfiecc_clk";
+ status = "disabled";
+ };
+
+ spi1: spi@11016000 {
+ compatible = "mediatek,mt2701-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11016000 0 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI1_SEL>,
+ <&pericfg CLK_PERI_SPI1>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi2: spi@11017000 {
+ compatible = "mediatek,mt2701-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11017000 0 0x1000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI2_SEL>,
+ <&pericfg CLK_PERI_SPI2>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt2701-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb0: larb@14010000 {
+ compatible = "mediatek,mt2701-smi-larb";
+ reg = <0 0x14010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ imgsys: syscon@15000000 {
+ compatible = "mediatek,mt2701-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb2: larb@15001000 {
+ compatible = "mediatek,mt2701-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&imgsys CLK_IMG_SMI_COMM>,
+ <&imgsys CLK_IMG_SMI_COMM>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ };
+
+ vdecsys: syscon@16000000 {
+ compatible = "mediatek,mt2701-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt2701-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&vdecsys CLK_VDEC_CKGEN>,
+ <&vdecsys CLK_VDEC_LARB>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+ };
+
+ hifsys: syscon@1a000000 {
+ compatible = "mediatek,mt2701-hifsys", "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ethsys: syscon@1b000000 {
+ compatible = "mediatek,mt2701-ethsys", "syscon";
+ reg = <0 0x1b000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ bdpsys: syscon@1c000000 {
+ compatible = "mediatek,mt2701-bdpsys", "syscon";
+ reg = <0 0x1c000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0x10211000 0x1000>,
- <0x10212000 0x1000>,
+ <0x10212000 0x2000>,
<0x10214000 0x2000>,
<0x10216000 0x2000>;
};
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0x10211000 0x1000>,
- <0x10212000 0x1000>,
+ <0x10212000 0x2000>,
<0x10214000 0x2000>,
<0x10216000 0x2000>;
};
/*
* Copyright (c) 2016 MediaTek Inc.
- * Author: John Crispin <blogic@openwrt.org>
+ * Author: John Crispin <john@phrozen.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
/*
* Copyright (c) 2016 MediaTek Inc.
- * Author: John Crispin <blogic@openwrt.org>
+ * Author: John Crispin <john@phrozen.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
- <0 0x10212000 0 0x1000>,
+ <0 0x10212000 0 0x2000>,
<0 0x10214000 0 0x2000>,
<0 0x10216000 0 0x2000>;
};
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
- <0 0x10212000 0 0x1000>,
+ <0 0x10212000 0 0x2000>,
<0 0x10214000 0 0x2000>,
<0 0x10216000 0 0x2000>;
};
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
- <0 0x10212000 0 0x1000>,
+ <0 0x10212000 0 0x2000>,
<0 0x10214000 0 0x2000>,
<0 0x10216000 0 0x2000>;
};
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
serial0 = &uart1;
aliases {
display0 = &dvi0;
display1 = &tv0;
+ ethernet = ðernet;
};
leds {
&usbhsehci {
phys = <0 &hsusb2_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub@2 {
+ compatible = "usb424,9514";
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: usbether@1 {
+ compatible = "usb424,ec00";
+ reg = <1>;
+ };
+ };
};
&vaux2 {
#address-cells = <1>;
#size-cells = <1>;
-
- partition@0 {
- label = "SPL";
- reg = <0 0x100000>;
- };
- partition@80000 {
- label = "U-Boot";
- reg = <0x100000 0x180000>;
- };
- partition@1c0000 {
- label = "Environment";
- reg = <0x280000 0x100000>;
- };
- partition@280000 {
- label = "Kernel";
- reg = <0x380000 0x300000>;
- };
- partition@780000 {
- label = "Filesystem";
- reg = <0x680000 0x1f980000>;
- };
};
};
compatible = "gpio-leds";
heartbeat {
label = "debug::sleep";
- gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */
+ gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */
linux,default-trigger = "default-on";
pinctrl-names = "default";
pinctrl-0 = <&debug_leds>;
reg = <0x55>;
};
+ /* Stereo headphone amplifier */
tpa6130a2: tpa6130a2@60 {
compatible = "ti,tpa6130a2";
reg = <0x60>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
non-removable;
+ no-sdio;
+ no-sd;
};
&mmc3 {
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
i2c0 = &i2c1;
aliases {
display0 = &dvi0;
display1 = &hdmi0;
+ ethernet = ðernet;
};
leds: leds {
&usbhsehci {
phys = <&hsusb1_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub@1 {
+ compatible = "usb424,9514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: usbether@1 {
+ compatible = "usb424,ec00";
+ reg = <1>;
+ };
+ };
};
&dss {
interrupt-parent = <&wakeupgen>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
i2c0 = &i2c1;
reg = <0x0 0x80000000 0 0x7f000000>; /* 2032 MB */
};
+ aliases {
+ ethernet = ðernet;
+ };
+
gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&power_button_pin>;
OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
>;
};
+
+&usbhsehci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub@2 {
+ compatible = "usb424,3503";
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: usbether@3 {
+ compatible = "usb424,7500";
+ reg = <3>;
+ };
+ };
+};
reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
};
+ aliases {
+ ethernet = ðernet;
+ };
+
leds {
compatible = "gpio-leds";
led1 {
>;
};
+&usbhsehci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub@2 {
+ compatible = "usb424,3503";
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ethernet: usbether@3 {
+ compatible = "usb424,9730";
+ reg = <3>;
+ };
+};
+
&wlcore {
compatible = "ti,wl1837";
};
compatible = "ti,omap5";
interrupt-parent = <&wakeupgen>;
+ chosen { };
aliases {
i2c0 = &i2c1;
interrupt-controller;
#interrupt-cells = <3>;
reg = <0 0x48211000 0 0x1000>,
- <0 0x48212000 0 0x1000>,
+ <0 0x48212000 0 0x2000>,
<0 0x48214000 0 0x2000>,
<0 0x48216000 0 0x2000>;
interrupt-parent = <&gic>;
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/oxsemi,ox810se.h>
+#include <dt-bindings/reset/oxsemi,ox810se.h>
/ {
compatible = "oxsemi,ox810se";
current-speed = <115200>;
no-loopback-test;
status = "disabled";
- resets = <&reset 17>;
+ resets = <&reset RESET_UART1>;
};
uart1: serial@300000 {
current-speed = <115200>;
no-loopback-test;
status = "disabled";
- resets = <&reset 18>;
+ resets = <&reset RESET_UART2>;
};
uart2: serial@900000 {
current-speed = <115200>;
no-loopback-test;
status = "disabled";
- resets = <&reset 22>;
+ resets = <&reset RESET_UART3>;
};
uart3: serial@a00000 {
current-speed = <115200>;
no-loopback-test;
status = "disabled";
- resets = <&reset 23>;
+ resets = <&reset RESET_UART4>;
};
};
/include/ "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/oxsemi,ox820.h>
+#include <dt-bindings/reset/oxsemi,ox820.h>
/ {
compatible = "oxsemi,ox820";
nandc: nand-controller@41000000 {
compatible = "oxsemi,ox820-nand";
reg = <0x41000000 0x100000>;
- clocks = <&stdclk 11>;
- resets = <&reset 15>;
+ clocks = <&stdclk CLK_820_NAND>;
+ resets = <&reset RESET_NAND>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
mac-address = [000000000000]; /* Filled in by U-Boot */
phy-mode = "rgmii";
- clocks = <&stdclk 9>, <&gmacclk>;
+ clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
clock-names = "gmac", "stmmaceth";
- resets = <&reset 6>;
+ resets = <&reset RESET_MAC>;
/* Regmap for sys registers */
oxsemi,sys-ctrl = <&sys>;
no-loopback-test;
status = "disabled";
clocks = <&sysclk>;
- resets = <&reset 17>;
+ resets = <&reset RESET_UART1>;
};
uart1: serial@300000 {
no-loopback-test;
status = "disabled";
clocks = <&sysclk>;
- resets = <&reset 18>;
+ resets = <&reset RESET_UART2>;
};
rps@400000 {
function = "ebi2";
};
};
+
+ /* Interrupt line for the KXSD9 accelerometer */
+ dragon_kxsd9_gpios: kxsd9 {
+ irq {
+ pins = "gpio57"; /* IRQ line */
+ bias-pull-up;
+ };
+ };
};
qcom,ssbi@500000 {
power-source = <PM8058_GPIO_S3>;
};
};
+ dragon_mpu3050_gpios: mpu3050-gpios {
+ pinconf {
+ pins = "gpio17";
+ function = "normal";
+ input-enable;
+ bias-disable;
+ power-source = <PM8058_GPIO_S3>;
+ };
+ };
dragon_sdcc3_gpios: sdcc3-gpios {
pinconf {
pins = "gpio22";
ak8975@0c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
- /* GPIO33 has interrupt 224 on the PM8058 */
- interrupt-parent = <&pm8058_gpio>;
+ /* FIXME: GPIO33 has interrupt 224 on the PM8058 */
+ interrupt-parent = <&pm8058>;
interrupts = <224 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&dragon_ak8975_gpios>;
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
- /* GPIO16 has interrupt 207 on the PM8058 */
- interrupt-parent = <&pm8058_gpio>;
+ /* FIXME: GPIO16 has interrupt 207 on the PM8058 */
+ interrupt-parent = <&pm8058>;
interrupts = <207 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
vddd-supply = <&pm8058_lvs0>; // 1.8V
vdda-supply = <&pm8058_l14>; // 2.85V
};
+ mpu3050@68 {
+ compatible = "invensense,mpu3050";
+ reg = <0x68>;
+ /*
+ * GPIO17 has interrupt 208 on the
+ * PM8058, it is pulled high by a 10k
+ * resistor to VLOGIC so needs to be
+ * active low/falling edge.
+ */
+ interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_mpu3050_gpios>;
+ vlogic-supply = <&pm8058_lvs0>; // 1.8V
+ vdd-supply = <&pm8058_l14>; // 2.85V
+
+ /*
+ * The MPU-3050 acts as a hub for the
+ * accelerometer.
+ */
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ kxsd9@18 {
+ compatible = "kionix,kxsd9";
+ reg = <0x18>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_kxsd9_gpios>;
+ iovdd-supply = <&pm8058_lvs0>; // 1.8V
+ vdd-supply = <&pm8058_l14>; // 2.85V
+ };
+ };
+ };
};
};
* The second interrupt is the PME interrupt
* for network wakeup, connected to the TLMM.
*/
- interrupts-extended = <&pmicintc 198 IRQ_TYPE_EDGE_FALLING>,
+ interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>,
<&tlmm 29 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
vdd33a-supply = <&dragon_veth>;
};
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
soc {
rpm@108000 {
regulators {
bias-pull-down;
};
+ s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ regulator-always-on;
+ };
+
s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
bias-pull-down;
};
+ /**
+ * 1.8v required on LS expansion
+ * for mezzanine boards
+ */
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
};
};
+
+ riva-pil@3204000 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+ };
+
+ hdmi-tx@4a00000 {
+ status = "okay";
+ core-vdda-supply = <&pm8921_hdmi_switch>;
+ hdmi-mux-supply = <&vcc3v3>;
+
+ hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+
+ hdmi-phy@4a00400 {
+ status = "okay";
+ core-vdda-supply = <&pm8921_hdmi_switch>;
+ };
+
+ mdp@5100000 {
+ status = "okay";
+
+ ports {
+ port@3 {
+ endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
};
};
bias-disable;
};
};
-
- hdmi_pinctrl: hdmi-pinctrl {
- mux {
- pins = "gpio70", "gpio71", "gpio72";
- function = "hdmi";
- };
-
- pinconf_ddc {
- pins = "gpio70", "gpio71";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf_hpd {
- pins = "gpio72";
- bias-pull-down;
- drive-strength = <16>;
- };
- };
};
rpm@108000 {
hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_pinctrl>;
-
ports {
port@0 {
endpoint {
bias-disable = <0>;
};
};
+
+ riva_fm_pin_a: riva-fm-active {
+ pins = "gpio14", "gpio15";
+ function = "riva_fm";
+ };
+
+ riva_bt_pin_a: riva-bt-active {
+ pins = "gpio16", "gpio17";
+ function = "riva_bt";
+ };
+
+ riva_wlan_pin_a: riva-wlan-active {
+ pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+ function = "riva_wlan";
+
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ hdmi_pinctrl: hdmi-pinctrl {
+ mux {
+ pins = "gpio70", "gpio71", "gpio72";
+ function = "hdmi";
+ };
+
+ pinconf_ddc {
+ pins = "gpio70", "gpio71";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf_hpd {
+ pins = "gpio72";
+ bias-pull-down;
+ drive-strength = <16>;
+ };
+ };
};
pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
};
};
+
+ riva-pil@3204000 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+ };
};
};
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
reg = <0x80000000 0x200000>;
no-map;
};
+
+ wcnss_mem: wcnss@8f000000 {
+ reg = <0x8f000000 0x700000>;
+ no-map;
+ };
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ CPU0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
cpu-idle-states = <&CPU_SPC>;
};
- cpu@1 {
+ CPU1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
cpu-idle-states = <&CPU_SPC>;
};
- cpu@2 {
+ CPU2: cpu@2 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
cpu-idle-states = <&CPU_SPC>;
};
- cpu@3 {
+ CPU3: cpu@3 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
};
clocks {
- cxo_board {
+ cxo_board: cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
firmware {
scm {
compatible = "qcom,scm-apq8064";
+
+ clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
+ clock-names = "core";
};
};
clock-names = "core";
};
+ ssbi@c00000 {
+ compatible = "qcom,ssbi";
+ reg = <0x00c00000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+
+ pm8821: pmic@1 {
+ compatible = "qcom,pm8821";
+ interrupt-parent = <&tlmm_pinmux>;
+ interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8821_mpps: mpps@50 {
+ compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
+ interrupts = <24 IRQ_TYPE_NONE>,
+ <25 IRQ_TYPE_NONE>,
+ <26 IRQ_TYPE_NONE>,
+ <27 IRQ_TYPE_NONE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
hdmi: hdmi-tx@4a00000 {
compatible = "qcom,hdmi-tx-8960";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pinctrl>;
reg = <0x04a00000 0x2f0>;
reg-names = "core_physical";
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
+
+ riva: riva-pil@3204000 {
+ compatible = "qcom,riva-pil";
+
+ reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal";
+
+ memory-region = <&wcnss_mem>;
+
+ vddcx-supply = <&pm8921_s3>;
+ vddmx-supply = <&pm8921_l24>;
+ vddpx-supply = <&pm8921_s4>;
+
+ status = "disabled";
+
+ iris {
+ compatible = "qcom,wcn3660";
+
+ clocks = <&cxo_board>;
+ clock-names = "xo";
+
+ vddxo-supply = <&pm8921_l4>;
+ vddrfa-supply = <&pm8921_s2>;
+ vddpa-supply = <&pm8921_l10>;
+ vdddig-supply = <&pm8921_lvs2>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&l2cc 8 25>;
+ qcom,smd-edge = <6>;
+
+ label = "riva";
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ qcom,mmio = <&riva>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
+
+ etb@1a01000 {
+ compatible = "coresight-etb10", "arm,primecell";
+ reg = <0x1a01000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etb_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
+
+ tpiu@1a03000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x1a03000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ tpiu_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-replicator";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ port@2 {
+ reg = <0>;
+ replicator_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out>;
+ };
+ };
+ };
+ };
+
+ funnel@1a04000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x1a04000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 2 - connected to STM component
+ * 3 - not-connected
+ * 6 - not-connected
+ * 7 - not-connected
+ */
+ port@0 {
+ reg = <0>;
+ funnel_in0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ funnel_in1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@4 {
+ reg = <4>;
+ funnel_in4: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@5 {
+ reg = <5>;
+ funnel_in5: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ port@8 {
+ reg = <0>;
+ funnel_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etm@1a1c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
+ };
+ };
+
+ etm@1a1d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
+ };
+ };
+
+ etm@1a1e000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
+ };
+ };
+
+ etm@1a1f000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
+ };
+ };
};
};
#include "qcom-apq8064-pins.dtsi"
cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <19200000>;
+ clock-frequency = <25000000>;
};
pxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <27000000>;
+ clock-frequency = <25000000>;
};
sleep_clk: sleep_clk {
};
};
-&pmicintc {
+&pm8058 {
keypad@148 {
linux,keymap = <
MATRIX_KEY(0, 0, KEY_FN_F1)
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pmicintc: pmic@0 {
+ pm8058: pmic@0 {
compatible = "qcom,pm8058";
interrupt-parent = <&tlmm>;
interrupts = <88 8>;
compatible = "qcom,pm8058-gpio",
"qcom,ssbi-gpio";
reg = <0x150>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8058>;
interrupts = <192 IRQ_TYPE_NONE>,
<193 IRQ_TYPE_NONE>,
<194 IRQ_TYPE_NONE>,
reg = <0x50>;
gpio-controller;
#gpio-cells = <2>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8058>;
interrupts =
<128 IRQ_TYPE_NONE>,
<129 IRQ_TYPE_NONE>,
pwrkey@1c {
compatible = "qcom,pm8058-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8058>;
interrupts = <50 1>, <51 1>;
debounce = <15625>;
pull-up;
keypad@148 {
compatible = "qcom,pm8058-keypad";
reg = <0x148>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8058>;
interrupts = <74 1>, <75 1>;
debounce = <15>;
scan-delay = <32>;
rtc@1e8 {
compatible = "qcom,pm8058-rtc";
reg = <0x1e8>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8058>;
interrupts = <39 1>;
allow-set-time;
};
dma-controller@f9944000 {
qcom,controlled-remotely;
};
+
+ usb-phy@f9a55000 {
+ status = "ok";
+ };
+
+ usb@f9a55000 {
+ status = "ok";
+ };
};
&spmi_bus {
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
#include "skeleton.dtsi"
/ {
no-map;
};
- adsp@0dc00000 {
+ adsp_region: adsp@0dc00000 {
reg = <0x0dc00000 0x1900000>;
no-map;
};
reg = <0x0fd80000 0x180000>;
no-map;
};
-
- unused@0ff00000 {
- reg = <0x0ff00000 0x10100000>;
- no-map;
- };
};
cpus {
clock-frequency = <19200000>;
};
+ adsp-pil {
+ compatible = "qcom,msm8974-adsp-pil";
+
+ interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ cx-supply = <&pm8841_s2>;
+
+ memory-region = <&adsp_region>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+ };
+
smem {
compatible = "qcom,smem";
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
smp2p-modem {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
#dma-cells = <1>;
qcom,ee = <0>;
};
+
+ usb1_phy: usb-phy@f9a55000 {
+ compatible = "qcom,usb-otg-snps";
+
+ reg = <0xf9a55000 0x400>;
+ interrupts-extended = <&intc 0 134 0>, <&intc 0 140 0>,
+ <&spmi_bus 0 0x9 0 0>;
+ interrupt-names = "core_irq", "async_irq", "pmic_id_irq";
+
+ vddcx-supply = <&pm8841_s2>;
+ v3p3-supply = <&pm8941_l24>;
+ v1p8-supply = <&pm8941_l6>;
+
+ dr_mode = "otg";
+ qcom,phy-init-sequence = <0x63 0x81 0xfffffff>;
+ qcom,otg-control = <1>;
+ qcom,phy-num = <0>;
+
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>;
+ reset-names = "phy", "link";
+
+ clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
+ <&gcc GCC_USB_HS_AHB_CLK>;
+ clock-names = "phy", "core", "iface";
+
+ status = "disabled";
+ };
+
+ usb@f9a55000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0xf9a55000 0x400>;
+ dr_mode = "otg";
+ interrupts = <0 134 0>, <0 140 0>;
+ interrupt-names = "core_irq", "async_irq";
+ usb-phy = <&usb1_phy>;
+
+ status = "disabled";
+ };
};
smd {
compatible = "qcom,smd";
+ adsp {
+ interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 8>;
+ qcom,smd-edge = <1>;
+ };
+
modem {
interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
status = "okay";
};
+&ostm0 {
+ status = "okay";
+};
+
+&ostm1 {
+ status = "okay";
+};
+
&scif2 {
status = "okay";
};
clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
};
+ mstp5_clks: mstp5_clks@fcfe0428 {
+ #clock-cells = <1>;
+ compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xfcfe0428 4>;
+ clocks = <&p0_clk>, <&p0_clk>;
+ clock-indices = <R7S72100_CLK_OSTM0 R7S72100_CLK_OSTM1>;
+ clock-output-names = "ostm0", "ostm1";
+ };
+
mstp7_clks: mstp7_clks@fcfe0430 {
#clock-cells = <1>;
compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
+ power-domains = <&cpg_clocks>;
reg-io-width = <4>;
bus-width = <8>;
status = "disabled";
cap-sdio-irq;
status = "disabled";
};
+
+ ostm0: timer@fcfec000 {
+ compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+ reg = <0xfcfec000 0x30>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ ostm1: timer@fcfec400 {
+ compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+ reg = <0xfcfec400 0x30>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&mstp5_clks R7S72100_CLK_OSTM1>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
};
};
mmcif0: mmc@ee200000 {
- compatible = "renesas,sh-mmcif";
+ compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>;
};
mmcif1: mmc@ee220000 {
- compatible = "renesas,sh-mmcif";
+ compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
- <0 0xf1002000 0 0x1000>,
+ <0 0xf1002000 0 0x2000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
- <0 0xf1002000 0 0x1000>,
+ <0 0xf1002000 0 0x2000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
};
irqc: interrupt-controller@e61c0000 {
#power-domain-cells = <0>;
};
- sysc: system-controller@e6180000 {
- compatible = "renesas,r8a7743-sysc";
- reg = <0 0xe6180000 0 0x200>;
- #power-domain-cells = <1>;
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
};
rst: reset-controller@e6160000 {
reg = <0 0xe6160000 0 0x100>;
};
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7743-sysc";
+ reg = <0 0xe6180000 0 0x200>;
+ #power-domain-cells = <1>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7743",
"renesas,rcar-dmac";
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
- <0 0xf1002000 0 0x1000>,
+ <0 0xf1002000 0 0x2000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
};
irqc: interrupt-controller@e61c0000 {
#power-domain-cells = <0>;
};
- sysc: system-controller@e6180000 {
- compatible = "renesas,r8a7745-sysc";
- reg = <0 0xe6180000 0 0x200>;
- #power-domain-cells = <1>;
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
};
rst: reset-controller@e6160000 {
reg = <0 0xe6160000 0 0x100>;
};
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7745-sysc";
+ reg = <0 0xe6180000 0 0x200>;
+ #power-domain-cells = <1>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7745",
"renesas,rcar-dmac";
i2c0: i2c@ffc70000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7778";
+ compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
reg = <0xffc70000 0x1000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C0>;
i2c1: i2c@ffc71000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7778";
+ compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
reg = <0xffc71000 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
i2c2: i2c@ffc72000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7778";
+ compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
reg = <0xffc72000 0x1000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
i2c3: i2c@ffc73000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7778";
+ compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
reg = <0xffc73000 0x1000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
};
mmcif: mmc@ffe4e000 {
- compatible = "renesas,sh-mmcif";
+ compatible = "renesas,mmcif-r8a7778", "renesas,sh-mmcif";
reg = <0xffe4e000 0x100>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_MMC>;
};
};
+&sata {
+ status = "okay";
+};
+
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
i2c0: i2c@ffc70000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7779";
+ compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
reg = <0xffc70000 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
i2c1: i2c@ffc71000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7779";
+ compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
reg = <0xffc71000 0x1000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
i2c2: i2c@ffc72000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7779";
+ compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
reg = <0xffc72000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
i2c3: i2c@ffc73000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7779";
+ compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
reg = <0xffc73000 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+ status = "disabled";
};
sdhi0: sd@ffe4c000 {
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
- <0 0xf1002000 0 0x1000>,
+ <0 0xf1002000 0 0x2000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7790";
+ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
i2c1: i2c@e6518000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7790";
+ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
i2c2: i2c@e6530000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7790";
+ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
i2c3: i2c@e6540000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7790";
+ compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
iic0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
iic1: i2c@e6510000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
iic2: i2c@e6520000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x425>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
iic3: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
};
usbphy: usb-phy@e6590100 {
- compatible = "renesas,usb-phy-r8a7790";
+ compatible = "renesas,usb-phy-r8a7790",
+ "renesas,rcar-gen2-usb-phy";
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
};
msiof0: spi@e6e20000 {
- compatible = "renesas,msiof-r8a7790";
+ compatible = "renesas,msiof-r8a7790",
+ "renesas,rcar-gen2-msiof";
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
};
msiof1: spi@e6e10000 {
- compatible = "renesas,msiof-r8a7790";
+ compatible = "renesas,msiof-r8a7790",
+ "renesas,rcar-gen2-msiof";
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
};
msiof2: spi@e6e00000 {
- compatible = "renesas,msiof-r8a7790";
+ compatible = "renesas,msiof-r8a7790",
+ "renesas,rcar-gen2-msiof";
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
};
msiof3: spi@e6c90000 {
- compatible = "renesas,msiof-r8a7790";
+ compatible = "renesas,msiof-r8a7790",
+ "renesas,rcar-gen2-msiof";
reg = <0 0xe6c90000 0 0x0064>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
- <0 0xf1002000 0 0x1000>,
+ <0 0xf1002000 0 0x2000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7791";
+ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
i2c1: i2c@e6518000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7791";
+ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
i2c2: i2c@e6530000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7791";
+ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
i2c3: i2c@e6540000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7791";
+ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
i2c4: i2c@e6520000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7791";
+ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
/* doesn't need pinmux */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7791";
+ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
/* doesn't need pinmux */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
i2c7: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
i2c8: i2c@e6510000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
};
usbphy: usb-phy@e6590100 {
- compatible = "renesas,usb-phy-r8a7791";
+ compatible = "renesas,usb-phy-r8a7791",
+ "renesas,rcar-gen2-usb-phy";
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
};
msiof0: spi@e6e20000 {
- compatible = "renesas,msiof-r8a7791";
+ compatible = "renesas,msiof-r8a7791",
+ "renesas,rcar-gen2-msiof";
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
};
msiof1: spi@e6e10000 {
- compatible = "renesas,msiof-r8a7791";
+ compatible = "renesas,msiof-r8a7791",
+ "renesas,rcar-gen2-msiof";
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
};
msiof2: spi@e6e00000 {
- compatible = "renesas,msiof-r8a7791";
+ compatible = "renesas,msiof-r8a7791",
+ "renesas,rcar-gen2-msiof";
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
- <0 0xf1002000 0 0x1000>,
+ <0 0xf1002000 0 0x2000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
/* I2C doesn't need pinmux */
i2c0: i2c@e6508000 {
- compatible = "renesas,i2c-r8a7792";
+ compatible = "renesas,i2c-r8a7792",
+ "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7792_CLK_I2C0>;
};
i2c1: i2c@e6518000 {
- compatible = "renesas,i2c-r8a7792";
+ compatible = "renesas,i2c-r8a7792",
+ "renesas,rcar-gen2-i2c";
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7792_CLK_I2C1>;
};
i2c2: i2c@e6530000 {
- compatible = "renesas,i2c-r8a7792";
+ compatible = "renesas,i2c-r8a7792",
+ "renesas,rcar-gen2-i2c";
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7792_CLK_I2C2>;
};
i2c3: i2c@e6540000 {
- compatible = "renesas,i2c-r8a7792";
+ compatible = "renesas,i2c-r8a7792",
+ "renesas,rcar-gen2-i2c";
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7792_CLK_I2C3>;
};
i2c4: i2c@e6520000 {
- compatible = "renesas,i2c-r8a7792";
+ compatible = "renesas,i2c-r8a7792",
+ "renesas,rcar-gen2-i2c";
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7792_CLK_I2C4>;
};
i2c5: i2c@e6528000 {
- compatible = "renesas,i2c-r8a7792";
+ compatible = "renesas,i2c-r8a7792",
+ "renesas,rcar-gen2-i2c";
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7792_CLK_I2C5>;
};
msiof0: spi@e6e20000 {
- compatible = "renesas,msiof-r8a7792";
+ compatible = "renesas,msiof-r8a7792",
+ "renesas,rcar-gen2-msiof";
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>;
};
msiof1: spi@e6e10000 {
- compatible = "renesas,msiof-r8a7792";
+ compatible = "renesas,msiof-r8a7792",
+ "renesas,rcar-gen2-msiof";
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>;
};
};
+&i2c6 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
- <0 0xf1002000 0 0x1000>,
+ <0 0xf1002000 0 0x2000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7793";
+ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
i2c1: i2c@e6518000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7793";
+ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
i2c2: i2c@e6530000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7793";
+ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
i2c3: i2c@e6540000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7793";
+ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
i2c4: i2c@e6520000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7793";
+ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
/* doesn't need pinmux */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r8a7793";
+ compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c";
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
/* doesn't need pinmux */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
i2c7: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
i2c8: i2c@e6510000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
- <0 0xf1002000 0 0x1000>,
+ <0 0xf1002000 0 0x2000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
- compatible = "renesas,i2c-r8a7794";
+ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
};
i2c1: i2c@e6518000 {
- compatible = "renesas,i2c-r8a7794";
+ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6518000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
};
i2c2: i2c@e6530000 {
- compatible = "renesas,i2c-r8a7794";
+ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6530000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
};
i2c3: i2c@e6540000 {
- compatible = "renesas,i2c-r8a7794";
+ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6540000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
};
i2c4: i2c@e6520000 {
- compatible = "renesas,i2c-r8a7794";
+ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6520000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
};
i2c5: i2c@e6528000 {
- compatible = "renesas,i2c-r8a7794";
+ compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c";
reg = <0 0xe6528000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
};
i2c6: i2c@e6500000 {
- compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7794", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_IIC0>;
};
i2c7: i2c@e6510000 {
- compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7794", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_IIC1>;
};
usbphy: usb-phy@e6590100 {
- compatible = "renesas,usb-phy-r8a7794";
+ compatible = "renesas,usb-phy-r8a7794",
+ "renesas,rcar-gen2-usb-phy";
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
#address-cells = <0>;
reg = <0x32011000 0x1000>,
- <0x32012000 0x1000>,
+ <0x32012000 0x2000>,
<0x32014000 0x2000>,
<0x32016000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
phy = <&phy0>;
- phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+ phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
phy-reset-duration = <10>; /* millisecond */
status = "okay";
compatible = "gpio-leds";
work {
- gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
label = "kylin:red:led";
pinctrl-names = "default";
pinctrl-0 = <&led_ctl>;
* - SDIO_RESET_L_WL_RST
* - SDIO_RESET_L_BT_EN
*/
- reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
- <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
- <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */
+ reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+ <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */
+ <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */
};
sound {
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
phy = <&phy0>;
- phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+ phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
phy-reset-duration = <10>; /* millisecond */
status = "okay";
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio2>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;
#address-cells = <0>;
reg = <0x10139000 0x1000>,
- <0x1013a000 0x1000>,
+ <0x1013a000 0x2000>,
<0x1013c000 0x2000>,
<0x1013e000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
autorepeat;
power {
- gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+ gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
debounce-interval = <100>;
};
volume-down {
- gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+ gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
linux,code = <KEY_VOLUMEDOWN>;
label = "GPIO Key Vol-";
linux,input-type = <1>;
reg = <0x2d>;
interrupt-parent = <&gpio6>;
- interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
vcc5-supply = <&vcc_io>;
vcc6-supply = <&vcc_io>;
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
reg = <0x2d>;
interrupt-parent = <&gpio6>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
vcc1-supply = <&vsys>;
vcc2-supply = <&vsys>;
phy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&gpio1>;
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
};
};
blue {
label = "mk808:blue:power";
- gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "default-on";
};
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&host_drv>;
pinctrl-names = "default";
regulator-always-on;
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&otg_drv>;
pinctrl-names = "default";
regulator-always-on;
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sdmmc_pwr>;
pinctrl-names = "default";
regulator-name = "vcc_sd";
vcc_wifi: sdio-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&wifi_pwr>;
pinctrl-names = "default";
regulator-name = "vcc_wifi";
ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
power {
wakeup-source;
- gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
vcc_sata: sata-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sata_pwr>;
regulator-name = "usb_5v";
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_drv>;
regulator-name = "host-pwr";
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_drv>;
regulator-name = "vcc_otg";
compatible = "asahi-kasei,ak8975";
reg = <0x0d>;
interrupt-parent = <&gpio4>;
- interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&comp_int>;
};
compatible = "fsl,mma8452";
reg = <0x1d>;
interrupt-parent = <&gpio4>;
- interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&gsensor_int>;
};
tps: tps@2d {
reg = <0x2d>;
interrupt-parent = <&gpio6>;
- interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>, <&pwr_hold>;
};
&uart0 {
+ compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac1_s 0>, <&dmac1_s 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
};
&uart1 {
+ compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac1_s 2>, <&dmac1_s 3>;
dma-names = "tx", "rx";
pinctrl-names = "default";
};
&uart2 {
+ compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac2 6>, <&dmac2 7>;
dma-names = "tx", "rx";
pinctrl-names = "default";
};
&uart3 {
+ compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac2 8>, <&dmac2 9>;
dma-names = "tx", "rx";
pinctrl-names = "default";
autorepeat;
power {
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
compatible = "bosch,bma250";
reg = <0x18>;
interrupt-parent = <&gpio0>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
};
};
compatible = "rockchip,rk818";
reg = <0x1c>;
interrupt-parent = <&gpio0>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
compatible = "silead,gsl1680";
reg = <0x40>;
interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
- power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
silead,max-fingers = <5>;
autorepeat;
power {
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
green {
label = "rock:green:user1";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
blue {
label = "rock:blue:user2";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
sleep {
label = "rock:red:power";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
ir_recv: gpio-ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio0 10 1>;
+ gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_recv_pin>;
};
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "otg-vbus";
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "host-pwr";
phy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&gpio3>;
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
};
};
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
- interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
#clock-cells = <0>;
};
&uart0 {
+ compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
};
&uart1 {
+ compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
};
&uart2 {
+ compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
};
&uart3 {
+ compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
pinctrl-names = "default";
pinctrl-0 = <&uart3_xfer>;
};
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
tx_delay = <0x30>;
#address-cells = <0>;
reg = <0x32011000 0x1000>,
- <0x32012000 0x1000>,
+ <0x32012000 0x2000>,
<0x32014000 0x2000>,
<0x32016000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
vcc_lcd: vcc-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
regulator-name = "vcc_lcd";
vcc_wl: vcc-wl {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwr>;
regulator-name = "vcc_wl";
reg = <0x51>;
interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <128>;
- enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
panel: panel {
compatible ="lg,lp079qx1-sp0v", "simple-panel";
backlight = <&backlight>;
- enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&lcd_cs>;
ports {
pinctrl-0 = <&pwrbtn>;
power {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <ð_phy_pwr>;
regulator-name = "vcc_phy";
*/
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
phy-supply = <&vcc_phy>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "okay";
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&host_drv>;
- vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
&ir {
- gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
};
&pinctrl {
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";
power {
wakeup-source;
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
};
leds {
compatible = "gpio-leds";
power {
- gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:blue:power";
pinctrl-names = "default";
pinctrl-0 = <&power_led>;
};
work {
- gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user";
linux,default-trigger = "rc-feedback";
pinctrl-names = "default";
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable>;
- reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
sound {
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
dovdd_1v8: dovdd-1v8-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "dovdd_1v8";
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
af_28: af_28-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "af_28";
dvdd_1v2: af_28-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cif_pwr>;
regulator-name = "dvdd_1v2";
clock-frequency = <32768>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio7>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
};
};
&ir {
- gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
};
&pinctrl {
power {
wakeup-source;
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
compatible = "gpio-leds";
work {
- gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user";
linux,default-trigger = "rc-feedback";
pinctrl-names = "default";
};
power {
- gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:green:power";
linux,default-trigger = "default-on";
pinctrl-names = "default";
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";
clock-frequency = <32768>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio7>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
};
compatible = "gpio-leds";
work {
- gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>;
label = "miqi:green:user";
linux,default-trigger = "default-on";
pinctrl-names = "default";
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio4 RK_PB0 0>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;
compatible = "asahi-kasei,ak8975";
reg = <0x0d>;
interrupt-parent = <&gpio8>;
- interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&comp_int>;
vdd-supply = <&vcc_io>;
compatible = "fsl,mma8452";
reg = <0x1d>;
interrupt-parent = <&gpio8>;
- interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&gsensor_int>;
};
pinctrl-0 = <&pwrbtn>;
power {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
vcc_otg: vcc-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg";
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
#clock-cells = <0>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
};
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
- reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
};
ext_gmac: external-gmac-clock {
phy-supply = <&vccio_pmu>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins &phy_rst>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>;
rx_delay = <0x10>;
compatible = "gpio-leds";
heartbeat {
- gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>;
label = "rock2:green:state1";
linux,default-trigger = "heartbeat";
};
mmc {
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
label = "rock2:blue:state2";
linux,default-trigger = "mmc0";
};
ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable>;
- reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
vcc_usb_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
/* Always on as the rockchip usb phy doesn't have a vbus-supply
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
clock-frequency = <32768>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
rockchip,model = "VEYRON-I2S";
rockchip,i2s-controller = <&i2s>;
rockchip,audio-codec = <&max98090>;
- rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
- rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>;
+ rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>;
rockchip,headset-codec = <&headsetcodec>;
};
};
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpio6>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>;
clock-names = "mclk";
clocks = <&cru SCLK_I2S0_OUT>;
pinctrl-names = "default";
compatible = "ti,ts3a227e";
reg = <0x3b>;
interrupt-parent = <&gpio0>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ts3a227e_int_l>;
ti,micbias = <7>; /* MICBIAS = 2.8V */
vcc5_host2: vcc5-host2-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb2_pwr_en>;
regulator-name = "vcc5_host2";
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
- dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
- <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ dvs-gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>,
+ <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
/delete-property/ vcc6-supply;
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <128>;
- enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
backlight-boot-off;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
gpio-charger {
compatible = "gpio-charger";
charger-type = "mains";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&ac_present_ap>;
};
vcc5_host1: vcc5-host1-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host1_pwr_en>;
regulator-name = "vcc5_host1";
vcc5v_otg: vcc5v-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usbotg_pwren_h>;
regulator-name = "vcc5_host2";
pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
lid {
label = "Lid";
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <0>; /* SW_LID */
linux,input-type = <5>; /* EV_SW */
reg = <0>;
google,cros-ec-spi-pre-delay = <30>;
interrupt-parent = <&gpio7>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ec_int>;
spi-max-frequency = <3000000>;
compatible = "elan,ekth3000";
reg = <0x15>;
interrupt-parent = <&gpio7>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&trackpad_int>;
vcc-supply = <&vcc33_io>;
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
- dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
- <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+ <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
regulators {
mic_vcc: LDO_REG2 {
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
trackpad@2c {
compatible = "hid-over-i2c";
interrupt-parent = <&gpio7>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
reg = <0x2c>;
hid-descr-addr = <0x0020>;
vcc-supply = <&vcc33_io>;
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
- dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
- <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+ <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
/delete-property/ vcc6-supply;
/delete-property/ vcc12-supply;
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&power_hdmi_on>;
};
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
volum_down {
label = "Volum_down";
- gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
};
volum_up {
label = "Volum_up";
- gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <100>;
};
compatible = "elan,ekth3500";
reg = <0x10>;
interrupt-parent = <&gpio2>;
- interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&touch_int &touch_rst>;
- reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
vcc33-supply = <&vcc33_touch>;
vccio-supply = <&vcc33_touch>;
};
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
power {
- gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
&sdmmc_wp_gpio &sdmmc_bus4>;
- wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
};
&tsadc {
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
- cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
rockchip,default-sample-phase = <90>;
num-slots = <1>;
sd-uhs-sdr12;
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
pinctrl-0 = <&pwr_key_l>;
power {
label = "Power";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
debounce-interval = <100>;
wakeup-source;
gpio-restart {
compatible = "gpio-restart";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&ap_warm_reset_h>;
priority = <200>;
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
- reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
};
sdio_pwrseq: sdio-pwrseq {
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
*/
- reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
vcc_5v: vcc-5v {
reg = <0x1b>;
clock-output-names = "xin32k", "wifibt_32kin";
interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
<&cru SCLK_ISP_JPE>,
<&cru SCLK_ISP>,
<&cru SCLK_RGA>;
+ pm_qos = <&qos_vio0_iep>,
+ <&qos_vio1_vop>,
+ <&qos_vio1_isp_w0>,
+ <&qos_vio1_isp_w1>,
+ <&qos_vio0_vop>,
+ <&qos_vio0_vip>,
+ <&qos_vio2_rga_r>,
+ <&qos_vio2_rga_w>,
+ <&qos_vio1_isp_r>;
};
/*
clocks = <&cru ACLK_HEVC>,
<&cru SCLK_HEVC_CABAC>,
<&cru SCLK_HEVC_CORE>;
+ pm_qos = <&qos_hevc_r>,
+ <&qos_hevc_w>;
};
/*
reg = <RK3288_PD_VIDEO>;
clocks = <&cru ACLK_VCODEC>,
<&cru HCLK_VCODEC>;
+ pm_qos = <&qos_video>;
};
/*
pd_gpu@RK3288_PD_GPU {
reg = <RK3288_PD_GPU>;
clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu_r>,
+ <&qos_gpu_w>;
};
};
};
};
+ qos_gpu_r: qos@ffaa0000 {
+ compatible = "syscon";
+ reg = <0xffaa0000 0x20>;
+ };
+
+ qos_gpu_w: qos@ffaa0080 {
+ compatible = "syscon";
+ reg = <0xffaa0080 0x20>;
+ };
+
+ qos_vio1_vop: qos@ffad0000 {
+ compatible = "syscon";
+ reg = <0xffad0000 0x20>;
+ };
+
+ qos_vio1_isp_w0: qos@ffad0100 {
+ compatible = "syscon";
+ reg = <0xffad0100 0x20>;
+ };
+
+ qos_vio1_isp_w1: qos@ffad0180 {
+ compatible = "syscon";
+ reg = <0xffad0180 0x20>;
+ };
+
+ qos_vio0_vop: qos@ffad0400 {
+ compatible = "syscon";
+ reg = <0xffad0400 0x20>;
+ };
+
+ qos_vio0_vip: qos@ffad0480 {
+ compatible = "syscon";
+ reg = <0xffad0480 0x20>;
+ };
+
+ qos_vio0_iep: qos@ffad0500 {
+ compatible = "syscon";
+ reg = <0xffad0500 0x20>;
+ };
+
+ qos_vio2_rga_r: qos@ffad0800 {
+ compatible = "syscon";
+ reg = <0xffad0800 0x20>;
+ };
+
+ qos_vio2_rga_w: qos@ffad0880 {
+ compatible = "syscon";
+ reg = <0xffad0880 0x20>;
+ };
+
+ qos_vio1_isp_r: qos@ffad0900 {
+ compatible = "syscon";
+ reg = <0xffad0900 0x20>;
+ };
+
+ qos_video: qos@ffae0000 {
+ compatible = "syscon";
+ reg = <0xffae0000 0x20>;
+ };
+
+ qos_hevc_r: qos@ffaf0000 {
+ compatible = "syscon";
+ reg = <0xffaf0000 0x20>;
+ };
+
+ qos_hevc_w: qos@ffaf0080 {
+ compatible = "syscon";
+ reg = <0xffaf0080 0x20>;
+ };
+
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
#address-cells = <0>;
reg = <0xffc01000 0x1000>,
- <0xffc02000 0x1000>,
+ <0xffc02000 0x2000>,
<0xffc04000 0x2000>,
<0xffc06000 0x2000>;
interrupts = <GIC_PPI 9 0xf04>;
clock-names = "dma_clk";
};
+ /* Place dma1 here despite its address */
+ dma1: dma-controller@f0004000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xf0004000 0x1000>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ clocks = <&dma1_clk>;
+ clock-names = "dma_clk";
+ };
+
pmc: pmc@f0014000 {
compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
status = "disabled";
};
+ ssc0: ssc@f8004000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf8004000 0x4000>;
+ interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(21))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(22))>;
+ dma-names = "tx", "rx";
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
macb0: ethernet@f8008000 {
compatible = "atmel,sama5d2-gem";
reg = <0xf8008000 0x1000>;
compatible = "atmel,at91sam9260-usart";
reg = <0xfc008000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
- dmas = <&dma0
+ dmas = <&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(41))>,
- <&dma0
+ <&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(42))>;
dma-names = "tx", "rx";
--- /dev/null
+/*
+ * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board
+ *
+ * Copyright (C) 2016 Atmel,
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb_cmp.dtsi"
+
+/ {
+ model = "Atmel SAMA5D36EK-CMP";
+ compatible = "atmel,sama5d36ek-cmp", "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@f0008000 {
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ sound {
+ status = "okay";
+ };
+};
uart0: serial@f0024000 {
compatible = "atmel,at91sam9260-usart";
- reg = <0xf0024000 0x200>;
+ reg = <0xf0024000 0x100>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
uart1: serial@f8028000 {
compatible = "atmel,at91sam9260-usart";
- reg = <0xf8028000 0x200>;
+ reg = <0xf8028000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
--- /dev/null
+/*
+ * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
+ *
+ * Copyright (C) 2016 Atmel,
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ compatible = "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x20000000 0x20000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+ };
+
+ macb0: ethernet@f0028000 {
+ phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
+
+ ethernet-phy@7 {
+ reg = <0x7>;
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
+ };
+
+ i2c1: i2c@f0018000 {
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ status = "disabled";
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddana_reg: LDO_REG1 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddfuse_reg: LDO_REG2 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ };
+ };
+ };
+ };
+
+ nand0: nand@60000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d2 {
+ label = "d2";
+ gpios = <&pioE 25 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
--- /dev/null
+/*
+ * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
+ *
+ * Copyright (C) 2016 Atmel,
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sama5d3xcm_cmp.dtsi"
+
+/ {
+ compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ mmc0: mmc@f0000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ spi0: spi@f0004000 {
+ dmas = <0>, <0>; /* Do not use DMA for spi0 */
+
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
+
+ ssc0: ssc@f0008000 {
+ atmel,clk-from-rk-pin;
+ };
+
+ /*
+ * i2c0 conflicts with ISI:
+ * disable it to allow the use of ISI
+ * can not enable audio when i2c0 disabled
+ */
+ i2c0: i2c@f0014000 {
+ wm8904: wm8904@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&pck0>;
+ clock-names = "mclk";
+ };
+ };
+
+ i2c1: i2c@f0018000 {
+ ov2640: camera@0x30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+ resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+ pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+ /* use pck1 for the master clock of ov2640 */
+ clocks = <&pck1>;
+ clock-names = "xvclk";
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <25000000>;
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&isi_0>;
+ bus-width = <8>;
+ };
+ };
+ };
+ };
+
+ usart1: serial@f0020000 {
+ dmas = <0>, <0>; /* Do not use DMA for usart1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+ status = "okay";
+ };
+
+ isi: isi@f0034000 {
+ port {
+ isi_0: endpoint {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
+ };
+ };
+ };
+
+ mmc1: mmc@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ adc0: adc@f8018000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ >;
+ pinctrl-1 = <
+ &pinctrl_adc0_adtrg_sleep
+ &pinctrl_adc0_ad0_sleep
+ &pinctrl_adc0_ad1_sleep
+ &pinctrl_adc0_ad2_sleep
+ &pinctrl_adc0_ad3_sleep
+ &pinctrl_adc0_ad4_sleep
+ >;
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ phy-mode = "rmii";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@1 {
+ /*interrupt-parent = <&pioE>;*/
+ /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+ reg = <1>;
+ };
+ };
+
+ pinctrl@fffff200 {
+ adc0 {
+ pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 {
+ atmel,pins =
+ <AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ pinctrl_adc0_ad0_sleep: adc0_ad0_1 {
+ atmel,pins =
+ <AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ pinctrl_adc0_ad1_sleep: adc0_ad1_1 {
+ atmel,pins =
+ <AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ pinctrl_adc0_ad2_sleep: adc0_ad2_1 {
+ atmel,pins =
+ <AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ pinctrl_adc0_ad3_sleep: adc0_ad3_1 {
+ atmel,pins =
+ <AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ pinctrl_adc0_ad4_sleep: adc0_ad4_1 {
+ atmel,pins =
+ <AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ };
+
+ board {
+ pinctrl_gpio_keys: gpio_keys {
+ atmel,pins =
+ <AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins =
+ <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_mmc1_cd: mmc1_cd {
+ atmel,pins =
+ <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+ atmel,pins =
+ <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+ atmel,pins =
+ <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_sensor_reset: sensor_reset-0 {
+ atmel,pins =
+ <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_sensor_power: sensor_power-0 {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+ };
+ };
+ };
+
+ dbgu: serial@ffffee00 {
+ dmas = <0>, <0>; /* Do not use DMA for dbgu */
+ status = "okay";
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+
+ usb0: gadget@00500000 {
+ atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+ };
+
+ sound {
+ compatible = "atmel,asoc-wm8904";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+ atmel,model = "wm8904 @ SAMA5D3EK";
+ atmel,audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "Mic", "MICBIAS",
+ "IN1L", "Mic";
+
+ atmel,ssc-controller = <&ssc0>;
+ atmel,audio-codec = <&wm8904>;
+
+ status = "disabled";
+ };
+
+ /* Conflict with LCD pins */
+ gpio_keys {
+ compatible = "gpio-keys";
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ pb_user1 {
+ label = "pb_user1";
+ gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x100>;
+ wakeup-source;
+ };
+ };
+};
compatible = "atmel,at91sam9260-usart";
reg = <0xf8004000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
- dmas = <&dma1
+ dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(22))>,
- <&dma1
+ <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(23))>;
dma-names = "tx", "rx";
compatible = "atmel,sama5d4-i2c";
reg = <0xf8018000 0x4000>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma1
+ dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(4))>,
- <&dma1
+ <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(5))>;
dma-names = "tx", "rx";
compatible = "atmel,at91sam9260-usart";
reg = <0xfc004000 0x100>;
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
- dmas = <&dma1
+ dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(24))>,
- <&dma1
+ <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(25))>;
dma-names = "tx", "rx";
compatible = "atmel,at91rm9200-spi";
reg = <0xfc01c000 0x100>;
interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
- dmas = <&dma1
+ dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(14))>,
- <&dma1
+ <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(15))>;
dma-names = "tx", "rx";
};
mmcif: mmc@e6bd0000 {
- compatible = "renesas,sh-mmcif";
+ compatible = "renesas,mmcif-sh73a0", "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
};
+ base_fpga_region {
+ compatible = "fpga-region";
+ fpga-mgr = <&fpgamgr0>;
+
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ };
+
can0: can@ffc00000 {
compatible = "bosch,d_can";
reg = <0xffc00000 0x1000>;
};
};
+ fpga_bridge0: fpga_bridge@ff400000 {
+ compatible = "altr,socfpga-lwhps2fpga-bridge";
+ reg = <0xff400000 0x100000>;
+ resets = <&rst LWHPS2FPGA_RESET>;
+ clocks = <&l4_main_clk>;
+ };
+
+ fpga_bridge1: fpga_bridge@ff500000 {
+ compatible = "altr,socfpga-hps2fpga-bridge";
+ reg = <0xff500000 0x10000>;
+ resets = <&rst HPS2FPGA_RESET>;
+ clocks = <&l4_main_clk>;
+ };
+
fpgamgr0: fpgamgr@ff706000 {
compatible = "altr,socfpga-fpga-mgr";
reg = <0xff706000 0x1000
- 0xffb90000 0x1000>;
+ 0xffb90000 0x4>;
interrupts = <0 175 4>;
};
arm,prefetch-offset = <7>;
};
+ l3regs@0xff800000 {
+ compatible = "altr,l3regs", "syscon";
+ reg = <0xff800000 0x1000>;
+ };
+
mmc: dwmmc0@ff704000 {
compatible = "altr,socfpga-dw-mshc";
reg = <0xff704000 0x1000>;
};
sdr: sdr@ffc25000 {
- compatible = "syscon";
+ compatible = "altr,sdr-ctl", "syscon";
reg = <0xffc25000 0x1000>;
};
};
};
+ base_fpga_region {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+
+ compatible = "fpga-region";
+ fpga-mgr = <&fpga_mgr>;
+ };
+
clkmgr@ffd04000 {
compatible = "altr,clk-mgr";
reg = <0xffd04000 0x1000>;
};
};
+ fpga_mgr: fpga-mgr@ffd03000 {
+ compatible = "altr,socfpga-a10-fpga-mgr";
+ reg = <0xffd03000 0x100
+ 0xffcfe400 0x20>;
+ clocks = <&l4_mp_clk>;
+ resets = <&rst FPGAMGR_RESET>;
+ reset-names = "fpgamgr";
+ };
+
i2c0: i2c@ffc02200 {
#address-cells = <1>;
#size-cells = <0>;
};
sdr: sdr@ffc25000 {
- compatible = "syscon";
+ compatible = "altr,sdr-ctl", "syscon";
reg = <0xffcfb100 0x80>;
};
status = "disabled";
};
+ nand: nand@ffb90000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand";
+ reg = <0xffb90000 0x72000>,
+ <0xffb80000 0x10000>;
+ reg-names = "nand_data", "denali_reg";
+ interrupts = <0 99 4>;
+ dma-mask = <0xffffffff>;
+ clocks = <&nand_clk>;
+ status = "disabled";
+ };
+
ocram: sram@ffe00000 {
compatible = "mmio-sram";
reg = <0xffe00000 0x40000>;
compatible = "dallas,ds1339";
reg = <0x68>;
};
+
+ ltc@5c {
+ compatible = "ltc2977";
+ reg = <0x5c>;
+ };
};
&uart1 {
&usb0 {
status = "okay";
};
+
+&watchdog0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (C) 2015 Altera Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&nand {
+ status = "okay";
+
+ partition@nand-boot {
+ label = "Boot and fpga data";
+ reg = <0x0 0x1C00000>;
+ };
+ partition@nand-rootfs {
+ label = "Root Filesystem - JFFS2";
+ reg = <0x1C00000 0x6400000>;
+ };
+};
};
};
};
+
+&watchdog0 {
+ status = "okay";
+};
ethernet0 = &gmac1;
};
+ leds {
+ compatible = "gpio-leds";
+ hps0 {
+ label = "hps_led0";
+ gpios = <&porta 0 1>;
+ };
+
+ hps1 {
+ label = "hps_led1";
+ gpios = <&portb 11 1>;
+ };
+
+ hps2 {
+ label = "hps_led2";
+ gpios = <&porta 17 1>;
+ };
+
+ hps3 {
+ label = "hps_led3";
+ gpios = <&porta 18 1>;
+ };
+ };
+
regulator_3_3v: 3-3-v-regulator {
compatible = "regulator-fixed";
regulator-name = "3.3V";
rxc-skew-ps = <2000>;
};
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
+ clock-frequency = <100000>;
+
+ /*
+ * adjust the falling times to decrease the i2c frequency to 50Khz
+ * because the LCD module does not work at the standard 100Khz
+ */
+ i2c-sda-falling-time-ns = <5000>;
+ i2c-scl-falling-time-ns = <5000>;
eeprom@51 {
compatible = "atmel,24c32";
ethernet0 = &gmac1;
};
+ leds {
+ compatible = "gpio-leds";
+ hps0 {
+ label = "hps_led0";
+ gpios = <&portb 15 1>;
+ };
+
+ hps1 {
+ label = "hps_led1";
+ gpios = <&portb 14 1>;
+ };
+
+ hps2 {
+ label = "hps_led2";
+ gpios = <&portb 13 1>;
+ };
+
+ hps3 {
+ label = "hps_led3";
+ gpios = <&portb 12 1>;
+ };
+ };
+
regulator_3_3v: 3-3-v-regulator {
compatible = "regulator-fixed";
regulator-name = "3.3V";
};
};
+&can0 {
+ status = "okay";
+};
+
&gmac1 {
status = "okay";
phy-mode = "rgmii";
rxc-skew-ps = <2000>;
};
+&gpio0 {
+ status = "okay";
+};
+
&gpio1 {
status = "okay";
};
+&gpio2 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
+ clock-frequency = <100000>;
+
+ /*
+ * adjust the falling times to decrease the i2c frequency to 50Khz
+ * because the LCD module does not work at the standard 100Khz
+ */
+ i2c-sda-falling-time-ns = <5000>;
+ i2c-scl-falling-time-ns = <5000>;
eeprom@51 {
compatible = "atmel,24c32";
};
};
+&spi0 {
+ status = "okay";
+
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
&usb1 {
status = "okay";
};
vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
v-ape-supply = <&db8500_vape_reg>;
musb_1v8-supply = <&db8500_vsmps2_reg>;
+ clocks = <&prcmu_clk PRCMU_SYSCLK>;
+ clock-names = "sysclk";
};
ab8500-ponkey {
};
soc {
- usb_per5@a03e0000 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&musb_default_mode>;
- pinctrl-1 = <&musb_sleep_mode>;
- };
-
uart@80120000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart0_default_mode>;
pinctrl-1 = <&i2c3_sleep_mode>;
};
+ /* ST6G3244ME level translator for 1.8/2.9 V */
vmmci: regulator-gpio {
compatible = "regulator-gpio";
regulator-type = "voltage";
startup-delay-us = <100>;
- enable-active-high;
states = <1800000 0x1
2900000 0x0>;
stericsson,cpu-dai = <&msp1 &msp3>;
stericsson,audio-codec = <&codec>;
+ clocks = <&prcmu_clk PRCMU_SYSCLK>;
+ clock-names = "sysclk";
};
msp0: msp@80123000 {
ab8500-gpio {
};
+ ab8500_usb {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&musb_default_mode>;
+ pinctrl-1 = <&musb_sleep_mode>;
+ };
+
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
vmmci: regulator-gpio {
gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
pinctrl {
vmmci: regulator-gpio {
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
pinctrl {
"", "", "", "", "", "", "", "";
};
- usb_per5@a03e0000 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&musb_default_mode>;
- pinctrl-1 = <&musb_sleep_mode>;
- };
-
sound {
compatible = "stericsson,snd-soc-mop500";
stericsson,cpu-dai = <&msp1 &msp3>;
stericsson,audio-codec = <&codec>;
+ clocks = <&prcmu_clk PRCMU_SYSCLK>;
+ clock-names = "sysclk";
};
msp0: msp@80123000 {
};
};
+ /* ST6G3244ME level translator for 1.8/2.9 V */
vmmci: regulator-gpio {
compatible = "regulator-gpio";
+ /* GPIO228 SD_SEL */
gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ /* GPIO217 MMC_EN */
enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-type = "voltage";
startup-delay-us = <100>;
- enable-active-high;
states = <1800000 0x1
2900000 0x0>;
"PM_GPIO42"; /* AB8500 GPIO42 */
};
+ ab8500_usb {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&musb_default_mode>;
+ pinctrl-1 = <&musb_sleep_mode>;
+ };
+
ext_regulators: ab8500-ext-regulators {
ab8500_ext1_reg: ab8500_ext1 {
regulator-name = "ab8500-ext-supply1";
sdi0_default_mode: sdi0_default {
snowball_mux {
function = "mc0";
+ /* Add the DAT31 pin even if it is not really used */
groups = "mc0dat31dir_a_1";
};
snowball_cfg1 {
#size-cells = <1>;
ranges;
- gp0_reserved: rproc@40000000 {
+ gp0_reserved: rproc@45000000 {
compatible = "shared-dma-pool";
- reg = <0x40000000 0x01000000>;
+ reg = <0x45000000 0x00400000>;
no-map;
- status = "disabled";
};
- gp1_reserved: rproc@41000000 {
+ delta_reserved: rproc@44000000 {
compatible = "shared-dma-pool";
- reg = <0x41000000 0x01000000>;
- no-map;
- status = "disabled";
- };
-
- audio_reserved: rproc@42000000 {
- compatible = "shared-dma-pool";
- reg = <0x42000000 0x01000000>;
- no-map;
- status = "disabled";
- };
-
- dmu_reserved: rproc@43000000 {
- compatible = "shared-dma-pool";
- reg = <0x43000000 0x01000000>;
+ reg = <0x44000000 0x01000000>;
no-map;
};
};
compatible = "st,sti-pwm";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1_chan0_default
&pinctrl_pwm1_chan1_default
clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
clock-frequency = <600000000>;
st,syscfg = <&syscfg_core 0x22c>;
+ #mbox-cells = <1>;
+ mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+ mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
};
-
- st231_gp1: remote-processor {
+ st231_delta: remote-processor {
compatible = "st,st231-rproc";
- memory-region = <&gp1_reserved>;
- resets = <&softreset STIH407_ST231_GP1_SOFTRESET>;
- reset-names = "sw_reset";
- clocks = <&clk_s_c0_flexgen CLK_ST231_GP_1>;
- clock-frequency = <600000000>;
- st,syscfg = <&syscfg_core 0x220>;
- };
-
- st231_audio: remote-processor {
- compatible = "st,st231-rproc";
- memory-region = <&audio_reserved>;
- resets = <&softreset STIH407_ST231_AUD_SOFTRESET>;
- reset-names = "sw_reset";
- clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
- clock-frequency = <600000000>;
- st,syscfg = <&syscfg_core 0x228>;
- };
-
- st231_dmu: remote-processor {
- compatible = "st,st231-rproc";
- memory-region = <&dmu_reserved>;
+ memory-region = <&delta_reserved>;
resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
reset-names = "sw_reset";
clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
clock-frequency = <600000000>;
st,syscfg = <&syscfg_core 0x224>;
+ #mbox-cells = <1>;
+ mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+ mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
};
/* fdma audio */
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
dma-channels = <16>;
#dma-cells = <3>;
+
+ status = "disabled";
};
/* fdma free running */
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ status = "disabled";
};
sti_sasg_codec: sti-sasg-codec {
ehci1: usb@9a83e00 {
status = "okay";
};
+
+ sti-display-subsystem {
+ sti-hda@8d02000 {
+ status = "okay";
+ };
+ };
};
};
<&clk_s_d2_quadfs 0>;
assigned-clock-rates = <297000000>,
- <108000000>,
+ <297000000>,
<0>,
<400000000>,
<400000000>;
sti-hda@8d02000 {
compatible = "st,stih407-hda";
+ status = "disabled";
reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
reg-names = "hda-reg", "video-dacs-ctrl";
clock-names = "pix",
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
};
+
+ sti-hqvdp@9c000000 {
+ compatible = "st,stih407-hqvdp";
+ reg = <0x9C00000 0x100000>;
+ clock-names = "hqvdp", "pix_main";
+ clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+ reset-names = "hqvdp";
+ resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
+ st,vtg = <&vtg_main>;
+ };
};
bdisp0:bdisp@9f10000 {
clocks = <&clk_sysin>;
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
};
+
+ delta0 {
+ compatible = "st,st-delta";
+ clock-names = "delta",
+ "delta-st231",
+ "delta-flash-promip";
+ clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+ <&clk_s_c0_flexgen CLK_ST231_DMU>,
+ <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+ };
};
};
dma-ranges = <0xc0000000 0x0 0x10000000>;
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_vref: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vref";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
green {
usbotg_hs_phy: usbphy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
- clocks = <&rcc 0 30>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
clock-names = "main_clk";
};
};
+&adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc3_in8_pin>;
+ vref-supply = <®_vref>;
+ status = "okay";
+ adc3: adc@200 {
+ st,adc-channels = <8>;
+ status = "okay";
+ };
+};
+
&clk_hse {
clock-frequency = <25000000>;
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&mac {
status = "okay";
pinctrl-0 = <ðernet_mii>;
};
};
+&rtc {
+ status = "okay";
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
clock-frequency = <8000000>;
};
+&rtc {
+ assigned-clocks = <&rcc 1 CLK_RTC>;
+ assigned-clock-parents = <&rcc 1 CLK_LSI>;
+ status = "okay";
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/clock/stm32fx-clock.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
/ {
clocks {
compatible = "fixed-clock";
clock-frequency = <32000>;
};
+
+ clk_i2s_ckin: i2s-ckin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
};
soc {
compatible = "st,stm32-timer";
reg = <0x40000000 0x400>;
interrupts = <28>;
- clocks = <&rcc 0 128>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
+ status = "disabled";
+ };
+
+ timers2: timers@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
+ clock-names = "int";
status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
};
timer3: timer@40000400 {
compatible = "st,stm32-timer";
reg = <0x40000400 0x400>;
interrupts = <29>;
- clocks = <&rcc 0 129>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
+ status = "disabled";
+ };
+
+ timers3: timers@40000400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000400 0x400>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
+ clock-names = "int";
status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
};
timer4: timer@40000800 {
compatible = "st,stm32-timer";
reg = <0x40000800 0x400>;
interrupts = <30>;
- clocks = <&rcc 0 130>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
+ status = "disabled";
+ };
+
+ timers4: timers@40000800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000800 0x400>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
+ clock-names = "int";
status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
};
timer5: timer@40000c00 {
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
interrupts = <50>;
- clocks = <&rcc 0 131>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
+ };
+
+ timers5: timers@40000c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000C00 0x400>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
};
timer6: timer@40001000 {
compatible = "st,stm32-timer";
reg = <0x40001000 0x400>;
interrupts = <54>;
- clocks = <&rcc 0 132>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
status = "disabled";
};
+ timers6: timers@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
timer7: timer@40001400 {
compatible = "st,stm32-timer";
reg = <0x40001400 0x400>;
interrupts = <55>;
- clocks = <&rcc 0 133>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
+ status = "disabled";
+ };
+
+ timers7: timers@40001400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001400 0x400>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timers@40001800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001800 0x400>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM12)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timers@40001c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001C00 0x400>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers14: timers@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ rtc: rtc@40002800 {
+ compatible = "st,stm32-rtc";
+ reg = <0x40002800 0x400>;
+ clocks = <&rcc 1 CLK_RTC>;
+ clock-names = "ck_rtc";
+ assigned-clocks = <&rcc 1 CLK_RTC>;
+ assigned-clock-parents = <&rcc 1 CLK_LSE>;
+ interrupt-parent = <&exti>;
+ interrupts = <17 1>;
+ interrupt-names = "alarm";
+ st,syscfg = <&pwrcfg>;
status = "disabled";
};
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
- clocks = <&rcc 0 145>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>;
status = "disabled";
};
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
- clocks = <&rcc 0 146>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>;
status = "disabled";
dmas = <&dma1 1 4 0x400 0x0>,
<&dma1 3 4 0x400 0x0>;
compatible = "st,stm32-uart";
reg = <0x40004c00 0x400>;
interrupts = <52>;
- clocks = <&rcc 0 147>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>;
status = "disabled";
};
compatible = "st,stm32-uart";
reg = <0x40005000 0x400>;
interrupts = <53>;
- clocks = <&rcc 0 148>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@40005400 {
+ compatible = "st,stm32f4-i2c";
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32F4_APB1_RESET(I2C1)>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
- clocks = <&rcc 0 158>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>;
status = "disabled";
};
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
- clocks = <&rcc 0 159>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>;
+ status = "disabled";
+ };
+
+ timers1: timers@40010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM1)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timers@40010400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010400 0x400>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM8)>;
+ clock-names = "int";
status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
};
usart1: serial@40011000 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
- clocks = <&rcc 0 164>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>;
status = "disabled";
dmas = <&dma2 2 4 0x400 0x0>,
<&dma2 7 4 0x400 0x0>;
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
- clocks = <&rcc 0 165>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>;
status = "disabled";
};
+ adc: adc@40012000 {
+ compatible = "st,stm32f4-adc-core";
+ reg = <0x40012000 0x400>;
+ interrupts = <18>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
+ clock-names = "adc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ adc1: adc@0 {
+ compatible = "st,stm32f4-adc";
+ #io-channel-cells = <1>;
+ reg = <0x0>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
+ interrupt-parent = <&adc>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ adc2: adc@100 {
+ compatible = "st,stm32f4-adc";
+ #io-channel-cells = <1>;
+ reg = <0x100>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>;
+ interrupt-parent = <&adc>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ adc3: adc@200 {
+ compatible = "st,stm32f4-adc";
+ #io-channel-cells = <1>;
+ reg = <0x200>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>;
+ interrupt-parent = <&adc>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+ };
+
syscfg: system-config@40013800 {
compatible = "syscon";
reg = <0x40013800 0x400>;
interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
};
+ timers9: timers@40014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014000 0x400>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM9)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@8 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <8>;
+ status = "disabled";
+ };
+ };
+
+ timers10: timers@40014400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014400 0x400>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers11: timers@40014800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014800 0x400>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
pwrcfg: power-config@40007000 {
compatible = "syscon";
reg = <0x40007000 0x400>;
gpio-controller;
#gpio-cells = <2>;
reg = <0x0 0x400>;
- clocks = <&rcc 0 0>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
};
gpio-controller;
#gpio-cells = <2>;
reg = <0x400 0x400>;
- clocks = <&rcc 0 1>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
};
gpio-controller;
#gpio-cells = <2>;
reg = <0x800 0x400>;
- clocks = <&rcc 0 2>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
};
gpio-controller;
#gpio-cells = <2>;
reg = <0xc00 0x400>;
- clocks = <&rcc 0 3>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
};
gpio-controller;
#gpio-cells = <2>;
reg = <0x1000 0x400>;
- clocks = <&rcc 0 4>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
};
gpio-controller;
#gpio-cells = <2>;
reg = <0x1400 0x400>;
- clocks = <&rcc 0 5>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
};
gpio-controller;
#gpio-cells = <2>;
reg = <0x1800 0x400>;
- clocks = <&rcc 0 6>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
};
gpio-controller;
#gpio-cells = <2>;
reg = <0x1c00 0x400>;
- clocks = <&rcc 0 7>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
};
gpio-controller;
#gpio-cells = <2>;
reg = <0x2000 0x400>;
- clocks = <&rcc 0 8>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
};
gpio-controller;
#gpio-cells = <2>;
reg = <0x2400 0x400>;
- clocks = <&rcc 0 9>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
};
gpio-controller;
#gpio-cells = <2>;
reg = <0x2800 0x400>;
- clocks = <&rcc 0 10>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
};
};
};
+ usart3_pins_a: usart3@0 {
+ pins1 {
+ pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
+ bias-disable;
+ };
+ };
+
usbotg_hs_pins_a: usbotg_hs@0 {
pins {
pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
slew-rate = <2>;
};
};
+
+ adc3_in8_pin: adc@200 {
+ pins {
+ pinmux = <STM32F429_PF10_FUNC_ANALOG>;
+ };
+ };
+
+ pwm1_pins: pwm@1 {
+ pins {
+ pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
+ <STM32F429_PB13_FUNC_TIM1_CH1N>,
+ <STM32F429_PB12_FUNC_TIM1_BKIN>;
+ };
+ };
+
+ pwm3_pins: pwm@3 {
+ pins {
+ pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
+ <STM32F429_PB5_FUNC_TIM3_CH2>;
+ };
+ };
+
+ i2c1_pins: i2c1@0 {
+ pins {
+ pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
+ <STM32F429_PB6_FUNC_I2C1_SCL>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <3>;
+ };
+ };
};
rcc: rcc@40023810 {
#clock-cells = <2>;
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
reg = <0x40023800 0x400>;
- clocks = <&clk_hse>;
+ clocks = <&clk_hse>, <&clk_i2s_ckin>;
st,syscfg = <&pwrcfg>;
+ assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
+ assigned-clock-rates = <1000000>;
};
dma1: dma-controller@40026000 {
<16>,
<17>,
<47>;
- clocks = <&rcc 0 21>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>;
#dma-cells = <4>;
};
<68>,
<69>,
<70>;
- clocks = <&rcc 0 22>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>;
#dma-cells = <4>;
st,mem2mem;
};
interrupts = <61>;
interrupt-names = "macirq";
clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
- clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>,
+ <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>,
+ <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>;
st,syscon = <&syscfg 0x4>;
snps,pbl = <8>;
snps,mixed-burst;
compatible = "snps,dwc2";
reg = <0x40040000 0x40000>;
interrupts = <77>;
- clocks = <&rcc 0 29>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>;
clock-names = "otg";
status = "disabled";
};
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
interrupts = <80>;
- clocks = <&rcc 0 38>;
+ clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>;
+
};
};
};
&systick {
- clocks = <&rcc 1 0>;
+ clocks = <&rcc 1 SYSTICK>;
status = "okay";
};
};
memory {
- reg = <0x00000000 0x800000>;
+ reg = <0x00000000 0x1000000>;
};
aliases {
clock-frequency = <8000000>;
};
+&rtc {
+ status = "okay";
+};
+
+&timers1 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer@0 {
+ status = "okay";
+ };
+};
+
+&timers3 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer@2 {
+ status = "okay";
+ };
+};
+
&usart3 {
+ pinctrl-0 = <&usart3_pins_a>;
+ pinctrl-names = "default";
status = "okay";
};
&pio {
emac_power_pin_a1000: emac_power_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15";
+ function = "gpio_out";
};
led_pins_a1000: led_pins@0 {
- allwinner,pins = "PH10", "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH10", "PH20";
+ function = "gpio_out";
};
};
&pio {
usb2_vbus_pin_a: usb2_vbus_pin@0 {
- allwinner,pins = "PH12";
+ pins = "PH12";
};
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
&pio {
led_pins_cubieboard: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH20", "PH21";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&pio {
bl_en_pin_dsrv9703c: bl_en_pin@0 {
- allwinner,pins = "PH7";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH7";
+ function = "gpio_out";
};
codec_pa_pin: codec_pa_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15";
+ function = "gpio_out";
};
motor_pins: motor_pins@0 {
- allwinner,pins = "PB3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB3";
+ function = "gpio_out";
};
touchscreen_pins: touchscreen_pins@0 {
- allwinner,pins = "PB13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB13";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
&pio {
codec_pa_pin: codec_pa_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15";
+ function = "gpio_out";
};
};
pinctrl-0 = <&hackberry_hogs>;
hackberry_hogs: hogs@0 {
- allwinner,pins = "PH19";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH19";
+ function = "gpio_out";
};
usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH12";
+ function = "gpio_out";
};
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
};
&usb2_vbus_pin_a {
- allwinner,pins = "PH6";
+ pins = "PH6";
};
&usb_otg {
&pio {
bl_en_pin_inet: bl_en_pin@0 {
- allwinner,pins = "PH7";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH7";
+ function = "gpio_out";
};
touchscreen_wake_pin: touchscreen_wake_pin@0 {
- allwinner,pins = "PB13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB13";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
&pio {
key_pins_inet9f: key_pins@0 {
- allwinner,pins = "PA0", "PA1", "PA3", "PA4",
- "PA5", "PA6", "PA8", "PA9",
- "PA11", "PA12", "PA13",
- "PA14", "PA15", "PA16", "PA17",
- "PH22", "PH23", "PH24", "PH25", "PH26";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA0", "PA1", "PA3", "PA4",
+ "PA5", "PA6", "PA8", "PA9",
+ "PA11", "PA12", "PA13",
+ "PA14", "PA15", "PA16", "PA17",
+ "PH22", "PH23", "PH24", "PH25", "PH26";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
&pio {
emac_power_pin_q5: emac_power_pin@0 {
- allwinner,pins = "PH19";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH19";
+ function = "gpio_out";
};
led_pins_q5: led_pins@0 {
- allwinner,pins = "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH20";
+ function = "gpio_out";
};
};
&pio {
led_pins_marsboard: led_pins@0 {
- allwinner,pins = "PB5", "PB6", "PB7", "PB8";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB5", "PB6", "PB7", "PB8";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&ir0_rx_pins_a {
/* The ir receiver is not always populated */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&mmc0 {
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH4";
+ function = "gpio_in";
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH5";
+ function = "gpio_in";
};
usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH12";
+ function = "gpio_out";
};
};
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC3";
+ function = "gpio_out";
};
led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
&pio {
led_pins_pcduino: led_pins@0 {
- allwinner,pins = "PH15", "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15", "PH16";
+ function = "gpio_out";
};
key_pins_pcduino: key_pins@0 {
- allwinner,pins = "PH17", "PH18", "PH19";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH17", "PH18", "PH19";
+ function = "gpio_in";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&pio {
usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
- allwinner,pins = "PD2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PD2";
+ function = "gpio_out";
};
};
&pio {
bl_en_pin_protab: bl_en_pin@0 {
- allwinner,pins = "PH7";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH7";
+ function = "gpio_out";
};
codec_pa_pin: codec_pa_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15";
+ function = "gpio_out";
};
touchscreen_pins: touchscreen_pins@0 {
- allwinner,pins = "PA5", "PB13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA5", "PB13";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
#gpio-cells = <3>;
emac_pins_a: emac0@0 {
- allwinner,pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA9", "PA10",
- "PA11", "PA12", "PA13", "PA14",
- "PA15", "PA16";
- allwinner,function = "emac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ function = "emac";
};
i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PB0", "PB1";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB0", "PB1";
+ function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PB18", "PB19";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB18", "PB19";
+ function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PB20", "PB21";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB20", "PB21";
+ function = "i2c2";
};
ir0_rx_pins_a: ir0@0 {
- allwinner,pins = "PB4";
- allwinner,function = "ir0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB4";
+ function = "ir0";
};
ir0_tx_pins_a: ir0@1 {
- allwinner,pins = "PB3";
- allwinner,function = "ir0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB3";
+ function = "ir0";
};
ir1_rx_pins_a: ir1@0 {
- allwinner,pins = "PB23";
- allwinner,function = "ir1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB23";
+ function = "ir1";
};
ir1_tx_pins_a: ir1@1 {
- allwinner,pins = "PB22";
- allwinner,function = "ir1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB22";
+ function = "ir1";
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2",
- "PF3", "PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
};
mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
- allwinner,pins = "PH1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH1";
+ function = "gpio_in";
+ bias-pull-up;
};
ps20_pins_a: ps20@0 {
- allwinner,pins = "PI20", "PI21";
- allwinner,function = "ps2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI20", "PI21";
+ function = "ps2";
};
ps21_pins_a: ps21@0 {
- allwinner,pins = "PH12", "PH13";
- allwinner,function = "ps2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH12", "PH13";
+ function = "ps2";
};
pwm0_pins_a: pwm0@0 {
- allwinner,pins = "PB2";
- allwinner,function = "pwm";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "pwm";
};
pwm1_pins_a: pwm1@0 {
- allwinner,pins = "PI3";
- allwinner,function = "pwm";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI3";
+ function = "pwm";
};
spdif_tx_pins_a: spdif@0 {
- allwinner,pins = "PB13";
- allwinner,function = "spdif";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PB13";
+ function = "spdif";
+ bias-pull-up;
};
spi0_pins_a: spi0@0 {
- allwinner,pins = "PI11", "PI12", "PI13";
- allwinner,function = "spi0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI11", "PI12", "PI13";
+ function = "spi0";
};
spi0_cs0_pins_a: spi0_cs0@0 {
- allwinner,pins = "PI10";
- allwinner,function = "spi0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI10";
+ function = "spi0";
};
spi1_pins_a: spi1@0 {
- allwinner,pins = "PI17", "PI18", "PI19";
- allwinner,function = "spi1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI17", "PI18", "PI19";
+ function = "spi1";
};
spi1_cs0_pins_a: spi1_cs0@0 {
- allwinner,pins = "PI16";
- allwinner,function = "spi1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI16";
+ function = "spi1";
};
spi2_pins_a: spi2@0 {
- allwinner,pins = "PC20", "PC21", "PC22";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC20", "PC21", "PC22";
+ function = "spi2";
};
spi2_pins_b: spi2@1 {
- allwinner,pins = "PB15", "PB16", "PB17";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB15", "PB16", "PB17";
+ function = "spi2";
};
spi2_cs0_pins_a: spi2_cs0@0 {
- allwinner,pins = "PC19";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC19";
+ function = "spi2";
};
spi2_cs0_pins_b: spi2_cs0@1 {
- allwinner,pins = "PB14";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB14";
+ function = "spi2";
};
uart0_pins_a: uart0@0 {
- allwinner,pins = "PB22", "PB23";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB22", "PB23";
+ function = "uart0";
};
uart0_pins_b: uart0@1 {
- allwinner,pins = "PF2", "PF4";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PF2", "PF4";
+ function = "uart0";
};
uart1_pins_a: uart1@0 {
- allwinner,pins = "PA10", "PA11";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA10", "PA11";
+ function = "uart1";
};
};
&pio {
mmc0_cd_pin_t003: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG1";
+ function = "gpio_in";
+ bias-pull-up;
};
led_pins_t003: led_pins@0 {
- allwinner,pins = "PB2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
};
};
&usb0_vbus_pin_a {
- allwinner,pins = "PG13";
+ pins = "PG13";
};
&usb1_vbus_pin_a {
- allwinner,pins = "PB10";
+ pins = "PB10";
};
&usb_otg {
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PG12";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG12";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_t004: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG1";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
- allwinner,pins = "PB18";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB18";
+ function = "gpio_out";
};
led_pins_t004: led_pins@0 {
- allwinner,pins = "PB2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
};
};
&usb1_vbus_pin_a {
- allwinner,pins = "PG13";
+ pins = "PG13";
};
&usbphy {
&pio {
led_pins_mk802: led_pins@0 {
- allwinner,pins = "PB2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "gpio_out";
};
mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG1";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
- allwinner,pins = "PB10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB10";
+ function = "gpio_out";
};
};
&pio {
mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG1";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
- allwinner,pins = "PG13";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG13";
+ function = "gpio_in";
+ bias-pull-up;
};
led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PE3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PE3";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
- allwinner,pins = "PB10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB10";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PG12";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG12";
+ function = "gpio_in";
+ bias-pull-up;
};
};
};
&usb0_vbus_pin_a {
- allwinner,pins = "PG11";
+ pins = "PG11";
};
&usbphy {
&pio {
mmc0_cd_pin_r7: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG1";
+ function = "gpio_in";
+ bias-pull-up;
};
led_pins_r7: led_pins@0 {
- allwinner,pins = "PB2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb1_vbus_pin_r7: usb1_vbus_pin@0 {
- allwinner,pins = "PG13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG13";
+ function = "gpio_out";
};
};
&pio {
led_pins_wobo_i5: led_pins@0 {
- allwinner,pins = "PB2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "gpio_out";
};
mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
- allwinner,pins = "PB3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PB3";
+ function = "gpio_in";
+ bias-pull-up;
};
emac_power_pin_wobo: emac_power_pin@0 {
- allwinner,pins = "PA02";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA02";
+ function = "gpio_out";
};
};
};
&usb1_vbus_pin_a {
- allwinner,pins = "PG12";
+ pins = "PG12";
};
&usbphy {
compatible = "allwinner,sun5i-a10s-pinctrl";
uart0_pins_a: uart0@0 {
- allwinner,pins = "PB19", "PB20";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB19", "PB20";
+ function = "uart0";
};
uart2_pins_a: uart2@0 {
- allwinner,pins = "PC18", "PC19";
- allwinner,function = "uart2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC18", "PC19";
+ function = "uart2";
};
emac_pins_a: emac0@0 {
- allwinner,pins = "PA0", "PA1", "PA2",
+ pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
- allwinner,function = "emac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "emac";
};
emac_pins_b: emac0@1 {
- allwinner,pins = "PD6", "PD7", "PD10",
+ pins = "PD6", "PD7", "PD10",
"PD11", "PD12", "PD13", "PD14",
"PD15", "PD18", "PD19", "PD20",
"PD21", "PD22", "PD23", "PD24",
"PD25", "PD26", "PD27";
- allwinner,function = "emac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "emac";
};
mmc1_pins_a: mmc1@0 {
- allwinner,pins = "PG3", "PG4", "PG5",
+ pins = "PG3", "PG4", "PG5",
"PG6", "PG7", "PG8";
- allwinner,function = "mmc1";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc1";
+ drive-strength = <30>;
};
spi2_pins_b: spi2@1 {
- allwinner,pins = "PB12", "PB13", "PB14";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB12", "PB13", "PB14";
+ function = "spi2";
};
spi2_cs0_pins_b: spi2_cs0@1 {
- allwinner,pins = "PB11";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB11";
+ function = "spi2";
};
};
&pio {
mmc0_cd_pin_d709: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG0";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PG1";
+ function = "gpio_in";
+ bias-pull-down;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PG2";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG2";
+ function = "gpio_in";
+ bias-pull-up;
};
};
};
&usb0_vbus_pin_a {
- allwinner,pins = "PG12";
+ pins = "PG12";
};
&usbphy {
&pio {
mmc0_cd_pin_h702: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG0";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PG2";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG2";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG1";
+ function = "gpio_in";
};
};
};
&usb0_vbus_pin_a {
- allwinner,pins = "PG12";
+ pins = "PG12";
};
&usbphy {
&pio {
mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG0";
+ function = "gpio_in";
+ bias-pull-up;
};
led_pins_olinuxinom: led_pins@0 {
- allwinner,pins = "PG9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG9";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PG2";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG2";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PG1";
+ function = "gpio_in";
+ bias-pull-down;
};
usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 {
- allwinner,pins = "PG12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG12";
+ function = "gpio_out";
};
usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
- allwinner,pins = "PG11";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG11";
+ function = "gpio_out";
};
};
&pio {
mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG0";
+ function = "gpio_in";
+ bias-pull-up;
};
led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PG9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG9";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PG2";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG2";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PG1";
+ function = "gpio_in";
+ bias-pull-down;
};
usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
- allwinner,pins = "PG11";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG11";
+ function = "gpio_out";
};
};
};
&usb0_vbus_pin_a {
- allwinner,pins = "PG12";
+ pins = "PG12";
};
&usbphy {
};
&codec_pa_pin {
- allwinner,pins = "PG3";
+ pins = "PG3";
};
&mmc2 {
&pio {
i2c_lcd_pins: i2c_lcd_pin@0 {
- allwinner,pins = "PG10", "PG12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG10", "PG12";
+ function = "gpio_out";
+ bias-pull-up;
};
};
};
&usb0_vbus_pin_a {
- allwinner,pins = "PB4";
+ pins = "PB4";
};
compatible = "allwinner,sun5i-a13-pinctrl";
lcd_rgb666_pins: lcd_rgb666@0 {
- allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
- "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
- "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
- "PD24", "PD25", "PD26", "PD27";
- allwinner,function = "lcd0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+ "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+ "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+ "PD24", "PD25", "PD26", "PD27";
+ function = "lcd0";
};
uart1_pins_a: uart1@0 {
- allwinner,pins = "PE10", "PE11";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PE10", "PE11";
+ function = "uart1";
};
uart1_pins_b: uart1@1 {
- allwinner,pins = "PG3", "PG4";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG3", "PG4";
+ function = "uart1";
};
};
&pio {
usb0_id_pin_chip_pro: usb0-id-pin@0 {
- allwinner,pins = "PG2";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG2";
+ function = "gpio_in";
};
wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 {
- allwinner,pins = "PB10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB10";
+ function = "gpio_out";
};
};
&pio {
mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG0";
+ function = "gpio_in";
};
usb0_id_pin_gr8_evb: usb0-id-pin@0 {
- allwinner,pins = "PG2";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG2";
+ function = "gpio_in";
};
usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG1";
+ function = "gpio_in";
};
usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 {
- allwinner,pins = "PG13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG13";
+ function = "gpio_out";
};
};
#gpio-cells = <3>;
i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PB0", "PB1";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB0", "PB1";
+ function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PB15", "PB16";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB15", "PB16";
+ function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PB17", "PB18";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB17", "PB18";
+ function = "i2c2";
};
i2s0_data_pins_a: i2s0-data@0 {
- allwinner,pins = "PB6", "PB7", "PB8", "PB9";
- allwinner,function = "i2s0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB6", "PB7", "PB8", "PB9";
+ function = "i2s0";
};
i2s0_mclk_pins_a: i2s0-mclk@0 {
- allwinner,pins = "PB5";
- allwinner,function = "i2s0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB5";
+ function = "i2s0";
};
ir0_rx_pins_a: ir0@0 {
- allwinner,pins = "PB4";
- allwinner,function = "ir0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB4";
+ function = "ir0";
};
lcd_rgb666_pins: lcd-rgb666@0 {
- allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+ pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
"PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
"PD24", "PD25", "PD26", "PD27";
- allwinner,function = "lcd0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "lcd0";
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+ pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc0";
+ drive-strength = <30>;
};
nand_pins_a: nand-base0@0 {
- allwinner,pins = "PC0", "PC1", "PC2",
+ pins = "PC0", "PC1", "PC2",
"PC5", "PC8", "PC9", "PC10",
"PC11", "PC12", "PC13", "PC14",
"PC15";
- allwinner,function = "nand0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "nand0";
};
nand_cs0_pins_a: nand-cs@0 {
- allwinner,pins = "PC4";
- allwinner,function = "nand0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC4";
+ function = "nand0";
};
nand_rb0_pins_a: nand-rb@0 {
- allwinner,pins = "PC6";
- allwinner,function = "nand0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC6";
+ function = "nand0";
};
pwm0_pins_a: pwm0@0 {
- allwinner,pins = "PB2";
- allwinner,function = "pwm0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "pwm0";
};
pwm1_pins: pwm1 {
- allwinner,pins = "PG13";
- allwinner,function = "pwm1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG13";
+ function = "pwm1";
};
spdif_tx_pins_a: spdif@0 {
- allwinner,pins = "PB10";
- allwinner,function = "spdif";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PB10";
+ function = "spdif";
+ bias-pull-up;
};
uart1_pins_a: uart1@1 {
- allwinner,pins = "PG3", "PG4";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG3", "PG4";
+ function = "uart1";
};
uart1_cts_rts_pins_a: uart1-cts-rts@0 {
- allwinner,pins = "PG5", "PG6";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG5", "PG6";
+ function = "uart1";
};
uart2_pins_a: uart2@1 {
- allwinner,pins = "PD2", "PD3";
- allwinner,function = "uart2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PD2", "PD3";
+ function = "uart2";
};
uart2_cts_rts_pins_a: uart2-cts-rts@0 {
- allwinner,pins = "PD4", "PD5";
- allwinner,function = "uart2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PD4", "PD5";
+ function = "uart2";
};
uart3_pins_a: uart3@1 {
- allwinner,pins = "PG9", "PG10";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG9", "PG10";
+ function = "uart3";
};
uart3_cts_rts_pins_a: uart3-cts-rts@0 {
- allwinner,pins = "PG11", "PG12";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG11", "PG12";
+ function = "uart3";
};
};
};
&mmc0_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&mmc0 {
&pio {
chip_vbus_pin: chip_vbus_pin@0 {
- allwinner,pins = "PB10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB10";
+ function = "gpio_out";
};
chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
- allwinner,pins = "PC19";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC19";
+ function = "gpio_out";
};
chip_id_det_pin: chip_id_det_pin@0 {
- allwinner,pins = "PG2";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG2";
+ function = "gpio_in";
};
chip_w1_pin: chip_w1_pin@0 {
- allwinner,pins = "PD2";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PD2";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&pio {
codec_pa_pin: codec_pa_pin@0 {
- allwinner,pins = "PG10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG10";
+ function = "gpio_out";
};
mmc0_cd_pin: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG0";
+ function = "gpio_in";
+ bias-pull-up;
};
ts_power_pin: ts_power_pin {
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PG1";
+ function = "gpio_in";
+ bias-pull-down;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PG2";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG2";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_pin_a: usb0_vbus_pin@0 {
- allwinner,pins = "PG12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG12";
+ function = "gpio_out";
};
};
#gpio-cells = <3>;
i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PB0", "PB1";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB0", "PB1";
+ function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PB15", "PB16";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB15", "PB16";
+ function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PB17", "PB18";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB17", "PB18";
+ function = "i2c2";
};
lcd_rgb565_pins: lcd_rgb565@0 {
- allwinner,pins = "PD3", "PD4", "PD5", "PD6", "PD7",
+ pins = "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
"PD19", "PD20", "PD21", "PD22", "PD23",
"PD24", "PD25", "PD26", "PD27";
- allwinner,function = "lcd0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "lcd0";
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2", "PF3",
- "PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
};
mmc2_pins_a: mmc2@0 {
- allwinner,pins = "PC6", "PC7", "PC8", "PC9",
- "PC10", "PC11", "PC12", "PC13",
- "PC14", "PC15";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12", "PC13",
+ "PC14", "PC15";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
};
spi2_pins_a: spi2@0 {
- allwinner,pins = "PE1", "PE2", "PE3";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PE1", "PE2", "PE3";
+ function = "spi2";
};
spi2_cs0_pins_a: spi2-cs0@0 {
- allwinner,pins = "PE0";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PE0";
+ function = "spi2";
};
uart3_pins_a: uart3@0 {
- allwinner,pins = "PG9", "PG10";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG9", "PG10";
+ function = "uart3";
};
uart3_pins_cts_rts_a: uart3-cts-rts@0 {
- allwinner,pins = "PG11", "PG12";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG11", "PG12";
+ function = "uart3";
};
pwm0_pins: pwm0 {
- allwinner,pins = "PB2";
- allwinner,function = "pwm";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "pwm";
};
};
&pio {
usb1_vbus_pin_a: usb1_vbus_pin@0 {
- allwinner,pins = "PH27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH27";
+ function = "gpio_out";
};
};
};
&mmc0_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&pio {
mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24";
+ function = "gpio_out";
};
i2c_lcd_pins: i2c_lcd_pin@0 {
- allwinner,pins = "PA23", "PA24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA23", "PA24";
+ function = "gpio_out";
+ bias-pull-up;
};
};
&mmc0_pins_a {
/* external pull-ups missing for some pins */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&mmc1 {
&pio {
gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
- allwinner,pins = "PA21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA21";
+ function = "gpio_out";
};
mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
- allwinner,pins = "PG10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG10";
+ function = "gpio_out";
};
};
&usb1_vbus_pin_a {
/* different pin from sunxi-common-regulators */
- allwinner,pins = "PH24";
+ pins = "PH24";
};
&usbphy {
&pio {
led_pins_i7: led_pins@0 {
- allwinner,pins = "PH13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH13";
+ function = "gpio_out";
};
mmc0_cd_pin_i7: mmc0_cd_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH22";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_i7: usb1_vbus_pin@0 {
- allwinner,pins = "PC27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC27";
+ function = "gpio_out";
};
};
&pio {
led_pins_m9: led_pins@0 {
- allwinner,pins = "PH13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH13";
+ function = "gpio_out";
};
mmc0_cd_pin_m9: mmc0_cd_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH22";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_m9: usb1_vbus_pin@0 {
- allwinner,pins = "PC27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC27";
+ function = "gpio_out";
};
};
&pio {
led_pins_m9: led_pins@0 {
- allwinner,pins = "PH13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH13";
+ function = "gpio_out";
};
mmc0_cd_pin_m9: mmc0_cd_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH22";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_m9: usb1_vbus_pin@0 {
- allwinner,pins = "PC27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC27";
+ function = "gpio_out";
};
};
#gpio-cells = <3>;
gmac_pins_gmii_a: gmac_gmii@0 {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
"PA8", "PA9", "PA10", "PA11",
"PA12", "PA13", "PA14", "PA15",
"PA16", "PA17", "PA18", "PA19",
"PA20", "PA21", "PA22", "PA23",
"PA24", "PA25", "PA26", "PA27";
- allwinner,function = "gmac";
+ function = "gmac";
/*
* data lines in GMII mode run at 125MHz and
* might need a higher signal drive strength
*/
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ drive-strength = <30>;
};
gmac_pins_mii_a: gmac_mii@0 {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
"PA12", "PA13", "PA14", "PA19",
"PA20", "PA21", "PA22", "PA23",
"PA24", "PA26", "PA27";
- allwinner,function = "gmac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "gmac";
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ pins = "PA0", "PA1", "PA2", "PA3",
"PA9", "PA10", "PA11",
"PA12", "PA13", "PA14", "PA19",
"PA20", "PA25", "PA26", "PA27";
- allwinner,function = "gmac";
+ function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ drive-strength = <40>;
};
i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PH14", "PH15";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH14", "PH15";
+ function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PH16", "PH17";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH16", "PH17";
+ function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PH18", "PH19";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH18", "PH19";
+ function = "i2c2";
};
lcd0_rgb888_pins: lcd0_rgb888 {
- allwinner,pins = "PD0", "PD1", "PD2", "PD3",
+ pins = "PD0", "PD1", "PD2", "PD3",
"PD4", "PD5", "PD6", "PD7",
"PD8", "PD9", "PD10", "PD11",
"PD12", "PD13", "PD14", "PD15",
"PD16", "PD17", "PD18", "PD19",
"PD20", "PD21", "PD22", "PD23",
"PD24", "PD25", "PD26", "PD27";
- allwinner,function = "lcd0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "lcd0";
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2",
+ pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc0";
+ drive-strength = <30>;
};
mmc1_pins_a: mmc1@0 {
- allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+ pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
- allwinner,function = "mmc1";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc1";
+ drive-strength = <30>;
};
mmc2_pins_a: mmc2@0 {
- allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
};
mmc2_8bit_emmc_pins: mmc2@1 {
- allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
"PC24";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc2";
+ drive-strength = <30>;
};
mmc3_8bit_emmc_pins: mmc3@1 {
- allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
"PC24";
- allwinner,function = "mmc3";
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc3";
+ drive-strength = <40>;
};
uart0_pins_a: uart0@0 {
- allwinner,pins = "PH20", "PH21";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH20", "PH21";
+ function = "uart0";
};
};
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#gpio-cells = <3>;
ir_pins_a: ir@0 {
- allwinner,pins = "PL4";
- allwinner,function = "s_ir";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL4";
+ function = "s_ir";
};
p2wi_pins: p2wi {
- allwinner,pins = "PL0", "PL1";
- allwinner,function = "s_p2wi";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL0", "PL1";
+ function = "s_p2wi";
};
};
&pio {
gt911_int_primo81: gt911_int_pin@0 {
- allwinner,pins = "PA3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA3";
+ function = "gpio_in";
};
mma8452_int_primo81: mma8452_int_pin@0 {
- allwinner,pins = "PA9";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA9";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&pio {
led_pin_sina31s: led_pin@0 {
- allwinner,pins = "PH13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH13";
+ function = "gpio_out";
};
mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
- allwinner,pins = "PA4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
};
&mmc0_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&mmc2 {
};
&mmc2_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&ohci0 {
&pio {
gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
- allwinner,pins = "PA21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA21";
+ function = "gpio_out";
};
led_pins_bpi_m2: led_pins@0 {
- allwinner,pins = "PG5", "PG10", "PG11";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG5", "PG10", "PG11";
+ function = "gpio_out";
};
mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
- allwinner,pins = "PA4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&r_pio {
mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
- allwinner,pins = "PL8";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL8";
+ function = "gpio_out";
};
};
&pio {
mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
};
};
&mmc0_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&p2wi {
&pio {
mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PA15";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA15";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&mmc3_pins_a {
/* AP6210 requires pull-up */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&ohci0 {
&pio {
gmac_power_pin_bpi_m1p: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_bpi_m1p: led_pins@0 {
- allwinner,pins = "PH24", "PH25";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24", "PH25";
+ function = "gpio_out";
};
mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH22";
+ function = "gpio_out";
};
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
gmac_power_pin_bananapi: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_bananapi: led_pins@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24";
+ function = "gpio_out";
};
};
&pio {
gmac_power_pin_bananapro: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_bananapro: led_pins@0 {
- allwinner,pins = "PH24", "PG2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24", "PG2";
+ function = "gpio_out";
};
mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
- allwinner,pins = "PH0";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH0";
+ function = "gpio_out";
};
usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
- allwinner,pins = "PH1";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH1";
+ function = "gpio_out";
};
vmmc3_pin_bananapro: vmmc3_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH22";
+ function = "gpio_out";
};
};
&pio {
led_pins_cubieboard2: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH20", "PH21";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&mmc3_pins_a {
/* AP6210 requires pull-up */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&ohci0 {
&pio {
ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH12";
+ function = "gpio_out";
};
led_pins_cubietruck: led_pins@0 {
- allwinner,pins = "PH7", "PH11", "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH7", "PH11", "PH20", "PH21";
+ function = "gpio_out";
};
mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH9";
+ function = "gpio_out";
};
usb0_vbus_pin_a: usb0_vbus_pin@0 {
- allwinner,pins = "PH17";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH17";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH19";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH19";
+ function = "gpio_in";
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH22";
+ function = "gpio_in";
};
};
&pio {
ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15";
+ function = "gpio_out";
};
usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
};
mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH9";
+ function = "gpio_out";
};
gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
- allwinner,pins = "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH16";
+ function = "gpio_out";
};
};
&mmc3_pins_a {
/* AP6210 / AP6330 requires pull-up */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&ohci0 {
&pio {
vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
};
vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH12";
+ function = "gpio_out";
};
gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
- allwinner,pins = "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH21";
+ function = "gpio_out";
};
led_pins_i12_tvbox: led_pins@0 {
- allwinner,pins = "PH9", "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH9", "PH20";
+ function = "gpio_out";
};
};
&pio {
led_pins_itead_core: led_pins@0 {
- allwinner,pins = "PH20","PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH20","PH21";
+ function = "gpio_out";
+ drive-strength = <20>;
};
};
};
&ahci_pwr_pin_a {
- allwinner,pins = "PB3";
+ pins = "PB3";
};
&ahci {
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_lamobo_r1: led_pins@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24";
+ function = "gpio_out";
};
};
};
&usb2_vbus_pin_a {
- allwinner,pins = "PH12";
+ pins = "PH12";
};
&usbphy {
&pio {
led_pins_m3: led_pins@0 {
- allwinner,pins = "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH20";
+ function = "gpio_out";
};
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH4";
+ function = "gpio_in";
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH5";
+ function = "gpio_in";
};
};
&pio {
ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC3";
+ function = "gpio_out";
};
led_pins_olimex_som_evb: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
- allwinner,pins = "PH0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH0";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH4";
+ function = "gpio_in";
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH5";
+ function = "gpio_in";
};
};
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC3";
+ function = "gpio_out";
};
led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
&pio {
mmc2_pins_nrst: mmc2@0 {
- allwinner,pins = "PC16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC16";
+ function = "gpio_out";
};
};
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC3";
+ function = "gpio_out";
};
led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
- allwinner,pins = "PC17";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC17";
+ function = "gpio_out";
};
};
&pio {
mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
- allwinner,pins = "PH11";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH11";
+ function = "gpio_in";
+ bias-pull-up;
};
led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
- allwinner,pins = "PH11";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH11";
+ function = "gpio_in";
+ bias-pull-up;
};
usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH22";
+ function = "gpio_out";
};
gmac_power_pin_orangepi: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_orangepi: led_pins@0 {
- allwinner,pins = "PH24", "PH25";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24", "PH25";
+ function = "gpio_out";
};
usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
- allwinner,pins = "PH26";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH26";
+ function = "gpio_out";
};
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH22";
+ function = "gpio_out";
};
gmac_power_pin_orangepi: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_orangepi: led_pins@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24";
+ function = "gpio_out";
};
usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
- allwinner,pins = "PH26";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH26";
+ function = "gpio_out";
};
};
&pio {
ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
};
led_pins_pcduino3_nano: led_pins@0 {
- allwinner,pins = "PH16", "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH16", "PH15";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
- allwinner,pins = "PD2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PD2";
+ function = "gpio_out";
};
};
};
&ahci_pwr_pin_a {
- allwinner,pins = "PH2";
+ pins = "PH2";
};
&codec {
&pio {
led_pins_pcduino3: led_pins@0 {
- allwinner,pins = "PH15", "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15", "PH16";
+ function = "gpio_out";
};
key_pins_pcduino3: key_pins@0 {
- allwinner,pins = "PH17", "PH18", "PH19";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH17", "PH18", "PH19";
+ function = "gpio_in";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&pio {
bl_enable_pin: bl_enable_pin@0 {
- allwinner,pins = "PH7";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH7";
+ function = "gpio_out";
};
codec_pa_pin: codec_pa_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15";
+ function = "gpio_out";
};
ts_reset_pin: ts_reset_pin@0 {
- allwinner,pins = "PB13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB13";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&pio {
vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH9";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
#gpio-cells = <3>;
clk_out_a_pins_a: clk_out_a@0 {
- allwinner,pins = "PI12";
- allwinner,function = "clk_out_a";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI12";
+ function = "clk_out_a";
};
clk_out_b_pins_a: clk_out_b@0 {
- allwinner,pins = "PI13";
- allwinner,function = "clk_out_b";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI13";
+ function = "clk_out_b";
};
emac_pins_a: emac0@0 {
- allwinner,pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA9", "PA10",
- "PA11", "PA12", "PA13", "PA14",
- "PA15", "PA16";
- allwinner,function = "emac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ function = "emac";
};
gmac_pins_mii_a: gmac_mii@0 {
- allwinner,pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA9", "PA10",
- "PA11", "PA12", "PA13", "PA14",
- "PA15", "PA16";
- allwinner,function = "gmac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ function = "gmac";
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
- allwinner,pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA10",
- "PA11", "PA12", "PA13",
- "PA15", "PA16";
- allwinner,function = "gmac";
+ pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA10",
+ "PA11", "PA12", "PA13",
+ "PA15", "PA16";
+ function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ drive-strength = <40>;
};
i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PB0", "PB1";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB0", "PB1";
+ function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PB18", "PB19";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB18", "PB19";
+ function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PB20", "PB21";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB20", "PB21";
+ function = "i2c2";
};
i2c3_pins_a: i2c3@0 {
- allwinner,pins = "PI0", "PI1";
- allwinner,function = "i2c3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI0", "PI1";
+ function = "i2c3";
};
ir0_rx_pins_a: ir0@0 {
- allwinner,pins = "PB4";
- allwinner,function = "ir0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB4";
+ function = "ir0";
};
ir0_tx_pins_a: ir0@1 {
- allwinner,pins = "PB3";
- allwinner,function = "ir0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB3";
+ function = "ir0";
};
ir1_rx_pins_a: ir1@0 {
- allwinner,pins = "PB23";
- allwinner,function = "ir1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB23";
+ function = "ir1";
};
ir1_tx_pins_a: ir1@1 {
- allwinner,pins = "PB22";
- allwinner,function = "ir1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB22";
+ function = "ir1";
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2",
- "PF3", "PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
};
mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
- allwinner,pins = "PH1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH1";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc2_pins_a: mmc2@0 {
- allwinner,pins = "PC6", "PC7", "PC8",
- "PC9", "PC10", "PC11";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PC6", "PC7", "PC8",
+ "PC9", "PC10", "PC11";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
};
mmc3_pins_a: mmc3@0 {
- allwinner,pins = "PI4", "PI5", "PI6",
- "PI7", "PI8", "PI9";
- allwinner,function = "mmc3";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI4", "PI5", "PI6",
+ "PI7", "PI8", "PI9";
+ function = "mmc3";
+ drive-strength = <30>;
};
ps20_pins_a: ps20@0 {
- allwinner,pins = "PI20", "PI21";
- allwinner,function = "ps2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI20", "PI21";
+ function = "ps2";
};
ps21_pins_a: ps21@0 {
- allwinner,pins = "PH12", "PH13";
- allwinner,function = "ps2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH12", "PH13";
+ function = "ps2";
};
pwm0_pins_a: pwm0@0 {
- allwinner,pins = "PB2";
- allwinner,function = "pwm";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "pwm";
};
pwm1_pins_a: pwm1@0 {
- allwinner,pins = "PI3";
- allwinner,function = "pwm";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI3";
+ function = "pwm";
};
spdif_tx_pins_a: spdif@0 {
- allwinner,pins = "PB13";
- allwinner,function = "spdif";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PB13";
+ function = "spdif";
+ bias-pull-up;
};
spi0_pins_a: spi0@0 {
- allwinner,pins = "PI11", "PI12", "PI13";
- allwinner,function = "spi0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI11", "PI12", "PI13";
+ function = "spi0";
};
spi0_cs0_pins_a: spi0_cs0@0 {
- allwinner,pins = "PI10";
- allwinner,function = "spi0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI10";
+ function = "spi0";
};
spi0_cs1_pins_a: spi0_cs1@0 {
- allwinner,pins = "PI14";
- allwinner,function = "spi0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI14";
+ function = "spi0";
};
spi1_pins_a: spi1@0 {
- allwinner,pins = "PI17", "PI18", "PI19";
- allwinner,function = "spi1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI17", "PI18", "PI19";
+ function = "spi1";
};
spi1_cs0_pins_a: spi1_cs0@0 {
- allwinner,pins = "PI16";
- allwinner,function = "spi1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI16";
+ function = "spi1";
};
spi2_pins_a: spi2@0 {
- allwinner,pins = "PC20", "PC21", "PC22";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC20", "PC21", "PC22";
+ function = "spi2";
};
spi2_pins_b: spi2@1 {
- allwinner,pins = "PB15", "PB16", "PB17";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB15", "PB16", "PB17";
+ function = "spi2";
};
spi2_cs0_pins_a: spi2_cs0@0 {
- allwinner,pins = "PC19";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC19";
+ function = "spi2";
};
spi2_cs0_pins_b: spi2_cs0@1 {
- allwinner,pins = "PB14";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB14";
+ function = "spi2";
};
uart0_pins_a: uart0@0 {
- allwinner,pins = "PB22", "PB23";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB22", "PB23";
+ function = "uart0";
};
uart2_pins_a: uart2@0 {
- allwinner,pins = "PI16", "PI17", "PI18", "PI19";
- allwinner,function = "uart2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI16", "PI17", "PI18", "PI19";
+ function = "uart2";
};
uart3_pins_a: uart3@0 {
- allwinner,pins = "PG6", "PG7", "PG8", "PG9";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG6", "PG7", "PG8", "PG9";
+ function = "uart3";
};
uart3_pins_b: uart3@1 {
- allwinner,pins = "PH0", "PH1";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH0", "PH1";
+ function = "uart3";
};
uart4_pins_a: uart4@0 {
- allwinner,pins = "PG10", "PG11";
- allwinner,function = "uart4";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG10", "PG11";
+ function = "uart4";
};
uart4_pins_b: uart4@1 {
- allwinner,pins = "PH4", "PH5";
- allwinner,function = "uart4";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH4", "PH5";
+ function = "uart4";
};
uart5_pins_a: uart5@0 {
- allwinner,pins = "PI10", "PI11";
- allwinner,function = "uart5";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI10", "PI11";
+ function = "uart5";
};
uart6_pins_a: uart6@0 {
- allwinner,pins = "PI12", "PI13";
- allwinner,function = "uart6";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI12", "PI13";
+ function = "uart6";
};
uart7_pins_a: uart7@0 {
- allwinner,pins = "PI20", "PI21";
- allwinner,function = "uart7";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI20", "PI21";
+ function = "uart7";
};
};
};
gic: interrupt-controller@01c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#gpio-cells = <3>;
uart0_pins_a: uart0@0 {
- allwinner,pins = "PF2", "PF4";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PF2", "PF4";
+ function = "uart0";
};
uart1_pins_a: uart1@0 {
- allwinner,pins = "PG6", "PG7";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG6", "PG7";
+ function = "uart1";
};
uart1_pins_cts_rts_a: uart1-cts-rts@0 {
- allwinner,pins = "PG8", "PG9";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG8", "PG9";
+ function = "uart1";
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2",
- "PF3", "PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
};
mmc1_pins_a: mmc1@0 {
- allwinner,pins = "PG0", "PG1", "PG2",
- "PG3", "PG4", "PG5";
- allwinner,function = "mmc1";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG0", "PG1", "PG2",
+ "PG3", "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
};
mmc2_8bit_pins: mmc2_8bit {
- allwinner,pins = "PC5", "PC6", "PC8",
- "PC9", "PC10", "PC11",
- "PC12", "PC13", "PC14",
- "PC15", "PC16";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC5", "PC6", "PC8",
+ "PC9", "PC10", "PC11",
+ "PC12", "PC13", "PC14",
+ "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
};
pwm0_pins: pwm0 {
- allwinner,pins = "PH0";
- allwinner,function = "pwm0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH0";
+ function = "pwm0";
};
i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PH2", "PH3";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2", "PH3";
+ function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PH4", "PH5";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH4", "PH5";
+ function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PE12", "PE13";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PE12", "PE13";
+ function = "i2c2";
};
lcd_rgb666_pins: lcd-rgb666@0 {
- allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
- "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
- "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
- "PD24", "PD25", "PD26", "PD27";
- allwinner,function = "lcd0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+ "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+ "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+ "PD24", "PD25", "PD26", "PD27";
+ function = "lcd0";
};
};
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#gpio-cells = <3>;
r_rsb_pins: r_rsb {
- allwinner,pins = "PL0", "PL1";
- allwinner,function = "s_rsb";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PL0", "PL1";
+ function = "s_rsb";
+ drive-strength = <20>;
+ bias-pull-up;
};
r_uart_pins_a: r_uart@0 {
- allwinner,pins = "PL2", "PL3";
- allwinner,function = "s_uart";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL2", "PL3";
+ function = "s_uart";
};
};
&pio {
mmc0_cd_pin_evb: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PB4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
};
&mmc1_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&r_pio {
wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
- allwinner,pins = "PL6";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL6";
+ function = "gpio_out";
};
};
};
&mmc1_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&r_pio {
wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
- allwinner,pins = "PL6";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL6";
+ function = "gpio_out";
};
};
};
&mmc1_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&mmc1 {
&r_pio {
led_pin_d978: led_pin_d978@0 {
- allwinner,pins = "PL5";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL5";
+ function = "gpio_out";
+ drive-strength = <20>;
};
};
&pio {
led_pin_olinuxino: led_pins@0 {
- allwinner,pins = "PB7";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB7";
+ function = "gpio_out";
};
mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB4";
+ function = "gpio_in";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PB3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB3";
+ function = "gpio_in";
};
};
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ drive-strength = <40>;
/* eMMC is missing pull-ups */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&ohci0 {
&pio {
mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PB4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
uart0_pins_b: uart0@1 {
- allwinner,pins = "PB0", "PB1";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB0", "PB1";
+ function = "uart0";
};
};
#gpio-cells = <3>;
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2",
- "PF3", "PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
};
uart0_pins_a: uart0@0 {
- allwinner,pins = "PF2", "PF4";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PF2", "PF4";
+ function = "uart0";
};
uart0_pins_b: uart0@1 {
- allwinner,pins = "PB9", "PB10";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB9", "PB10";
+ function = "uart0";
};
};
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
&r_pio {
pwr_led_bpi_m2p: led_pins@0 {
- allwinner,pins = "PL10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL10";
+ function = "gpio_out";
};
sw_r_bpi_m2p: key_pins@0 {
- allwinner,pins = "PL3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL3";
+ function = "gpio_in";
};
wifi_en_bpi_m2p: wifi_en_pin {
- allwinner,pins = "PL7";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL7";
+ function = "gpio_out";
};
};
&pio {
leds_npi: led_pins@0 {
- allwinner,pins = "PA10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA10";
+ function = "gpio_out";
};
};
&r_pio {
leds_r_npi: led_pins@0 {
- allwinner,pins = "PL10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL10";
+ function = "gpio_out";
};
sw_r_npi: key_pins@0 {
- allwinner,pins = "PL3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL3";
+ function = "gpio_in";
};
};
&pio {
leds_opc: led_pins@0 {
- allwinner,pins = "PA15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA15";
+ function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
- allwinner,pins = "PL10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL10";
+ function = "gpio_out";
};
sw_r_opc: key_pins@0 {
- allwinner,pins = "PL3", "PL4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL3", "PL4";
+ function = "gpio_in";
};
wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 {
- allwinner,pins = "PL7";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL7";
+ function = "gpio_out";
};
};
};
&usb1_vbus_pin_a {
- allwinner,pins = "PG13";
+ pins = "PG13";
};
&usbphy {
&pio {
leds_opc: led_pins@0 {
- allwinner,pins = "PA15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA15";
+ function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
- allwinner,pins = "PL10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL10";
+ function = "gpio_out";
};
sw_r_opc: key_pins@0 {
- allwinner,pins = "PL3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL3";
+ function = "gpio_in";
};
};
&pio {
leds_opc: led_pins@0 {
- allwinner,pins = "PA15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA15";
+ function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
- allwinner,pins = "PL10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL10";
+ function = "gpio_out";
};
sw_r_opc: key_pins@0 {
- allwinner,pins = "PL3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL3";
+ function = "gpio_in";
};
};
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ drive-strength = <40>;
/* eMMC is missing pull-ups */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&pio {
leds_opc: led_pins@0 {
- allwinner,pins = "PA15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA15";
+ function = "gpio_out";
};
};
&r_pio {
leds_r_opc: led_pins@0 {
- allwinner,pins = "PL10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL10";
+ function = "gpio_out";
};
sw_r_opc: key_pins@0 {
- allwinner,pins = "PL3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL3";
+ function = "gpio_in";
};
};
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ drive-strength = <40>;
/* eMMC is missing pull-ups */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&pio {
usb3_vbus_pin_a: usb3_vbus_pin@0 {
- allwinner,pins = "PG11";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG11";
+ function = "gpio_out";
};
};
#interrupt-cells = <3>;
i2c0_pins: i2c0 {
- allwinner,pins = "PA11", "PA12";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA11", "PA12";
+ function = "i2c0";
};
i2c1_pins: i2c1 {
- allwinner,pins = "PA18", "PA19";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA18", "PA19";
+ function = "i2c1";
};
i2c2_pins: i2c2 {
- allwinner,pins = "PE12", "PE13";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PE12", "PE13";
+ function = "i2c2";
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2", "PF3",
- "PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
};
mmc0_cd_pin: mmc0_cd_pin@0 {
- allwinner,pins = "PF6";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PF6";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc1_pins_a: mmc1@0 {
- allwinner,pins = "PG0", "PG1", "PG2", "PG3",
- "PG4", "PG5";
- allwinner,function = "mmc1";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
};
mmc2_8bit_pins: mmc2_8bit {
- allwinner,pins = "PC5", "PC6", "PC8",
- "PC9", "PC10", "PC11",
- "PC12", "PC13", "PC14",
- "PC15", "PC16";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC5", "PC6", "PC8",
+ "PC9", "PC10", "PC11",
+ "PC12", "PC13", "PC14",
+ "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
};
spi0_pins: spi0 {
- allwinner,pins = "PC0", "PC1", "PC2", "PC3";
- allwinner,function = "spi0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC0", "PC1", "PC2", "PC3";
+ function = "spi0";
};
spi1_pins: spi1 {
- allwinner,pins = "PA15", "PA16", "PA14", "PA13";
- allwinner,function = "spi1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA15", "PA16", "PA14", "PA13";
+ function = "spi1";
};
uart0_pins_a: uart0@0 {
- allwinner,pins = "PA4", "PA5";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA4", "PA5";
+ function = "uart0";
};
uart1_pins: uart1 {
- allwinner,pins = "PG6", "PG7";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG6", "PG7";
+ function = "uart1";
};
uart1_rts_cts_pins: uart1_rts_cts {
- allwinner,pins = "PG8", "PG9";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG8", "PG9";
+ function = "uart1";
};
uart2_pins: uart2 {
- allwinner,pins = "PA0", "PA1";
- allwinner,function = "uart2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA0", "PA1";
+ function = "uart2";
};
uart3_pins: uart3 {
- allwinner,pins = "PA13", "PA14";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA13", "PA14";
+ function = "uart3";
};
};
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
ir_pins_a: ir@0 {
- allwinner,pins = "PL11";
- allwinner,function = "s_cir_rx";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL11";
+ function = "s_cir_rx";
};
};
};
};
&mmc1_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&r_pio {
wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 {
- allwinner,pins = "PL6", "PL7", "PL11";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PL6", "PL7", "PL11";
+ function = "gpio_in";
+ bias-pull-up;
};
};
};
&mmc2_8bit_pins {
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ drive-strength = <40>;
+ bias-pull-up;
};
&ohci0 {
&pio {
mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
- allwinner,pins = "PD14";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PD14";
+ function = "gpio_in";
+ bias-pull-up;
};
led_pins_parrot: led_pins@0 {
- allwinner,pins = "PE16", "PE17";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PE16", "PE17";
+ function = "gpio_out";
};
usb0_id_det: usb0_id_detect_pin@0 {
- allwinner,pins = "PD10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PD10";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
- allwinner,pins = "PD12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PD12";
+ function = "gpio_out";
};
};
&r_pio {
wifi_reset_pin_parrot: wifi_reset_pin@0 {
- allwinner,pins = "PL6";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL6";
+ function = "gpio_out";
};
};
&pio {
bl_en_pin: bl_en_pin@0 {
- allwinner,pins = "PH6";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH6";
+ function = "gpio_in";
};
mmc0_cd_pin: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PB4";
+ function = "gpio_in";
+ bias-pull-up;
};
ts_power_pin: ts_power_pin@0 {
- allwinner,pins = "PH1";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH1";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH8";
+ function = "gpio_in";
+ bias-pull-up;
};
};
};
&mmc1_pins {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&mmc2 {
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ drive-strength = <40>;
};
&osc32k {
&pio {
led_pins_cubieboard4: led-pins@0 {
- allwinner,pins = "PH6", "PH17";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH6", "PH17";
+ function = "gpio_out";
};
mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
- allwinner,pins = "PH18";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH18";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&r_pio {
wifi_en_pin_cubieboard4: wifi_en_pin@0 {
- allwinner,pins = "PL2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL2";
+ function = "gpio_out";
};
};
};
&mmc1_pins {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&mmc2 {
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ drive-strength = <40>;
};
&ohci0 {
&pio {
led_pins_optimus: led-pins@0 {
- allwinner,pins = "PH0", "PH1";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH0", "PH1";
+ function = "gpio_out";
};
mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
- allwinner,pins = "PH18";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH18";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH4";
+ function = "gpio_out";
};
usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH5";
+ function = "gpio_out";
};
};
&r_pio {
led_r_pins_optimus: led-pins@1 {
- allwinner,pins = "PM15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PM15";
+ function = "gpio_out";
};
wifi_en_pin_optimus: wifi_en_pin@0 {
- allwinner,pins = "PL2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL2";
+ function = "gpio_out";
};
};
gic: interrupt-controller@01c41000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c41000 0x1000>,
- <0x01c42000 0x1000>,
+ <0x01c42000 0x2000>,
<0x01c44000 0x2000>,
<0x01c46000 0x2000>;
interrupt-controller;
#gpio-cells = <3>;
i2c3_pins_a: i2c3@0 {
- allwinner,pins = "PG10", "PG11";
- allwinner,function = "i2c3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG10", "PG11";
+ function = "i2c3";
};
mmc0_pins: mmc0 {
- allwinner,pins = "PF0", "PF1" ,"PF2", "PF3",
- "PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PF0", "PF1" ,"PF2", "PF3",
+ "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
};
mmc1_pins: mmc1 {
- allwinner,pins = "PG0", "PG1" ,"PG2", "PG3",
+ pins = "PG0", "PG1" ,"PG2", "PG3",
"PG4", "PG5";
- allwinner,function = "mmc1";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc1";
+ drive-strength = <30>;
};
mmc2_8bit_pins: mmc2_8bit {
- allwinner,pins = "PC6", "PC7", "PC8", "PC9",
- "PC10", "PC11", "PC12",
- "PC13", "PC14", "PC15",
- "PC16";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12",
+ "PC13", "PC14", "PC15",
+ "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
};
uart0_pins_a: uart0@0 {
- allwinner,pins = "PH12", "PH13";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH12", "PH13";
+ function = "uart0";
};
uart4_pins_a: uart4@0 {
- allwinner,pins = "PG12", "PG13", "PG14", "PG15";
- allwinner,function = "uart4";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG12", "PG13", "PG14", "PG15";
+ function = "uart4";
};
};
#gpio-cells = <3>;
r_ir_pins: r_ir {
- allwinner,pins = "PL6";
- allwinner,function = "s_cir_rx";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL6";
+ function = "s_cir_rx";
};
r_rsb_pins: r_rsb {
- allwinner,pins = "PN0", "PN1";
- allwinner,function = "s_rsb";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PN0", "PN1";
+ function = "s_rsb";
+ drive-strength = <20>;
+ bias-pull-up;
};
};
&pio {
ahci_pwr_pin_a: ahci_pwr_pin@0 {
- allwinner,pins = "PB8";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB8";
+ function = "gpio_out";
};
usb0_vbus_pin_a: usb0_vbus_pin@0 {
- allwinner,pins = "PB9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB9";
+ function = "gpio_out";
};
usb1_vbus_pin_a: usb1_vbus_pin@0 {
- allwinner,pins = "PH6";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH6";
+ function = "gpio_out";
};
usb2_vbus_pin_a: usb2_vbus_pin@0 {
- allwinner,pins = "PH3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH3";
+ function = "gpio_out";
};
};
clocks = <&xtal>;
};
+ mmc0: mmc@21000 {
+ compatible = "arasan,sdhci-8.9a";
+ reg = <0x21000 0x200>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>;
+ interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mmc1: mmc@21200 {
+ compatible = "arasan,sdhci-8.9a";
+ reg = <0x21200 0x200>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usb0: usb@21400 {
+ compatible = "chipidea,usb2";
+ reg = <0x21400 0x200>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb0_phy>;
+ phy-names = "usb-phy";
+ };
+
+ usb0_phy: phy@21700 {
+ compatible = "sigma,smp8642-usb-phy";
+ reg = <0x21700 0x100>;
+ #phy-cells = <0>;
+ clocks = <&clkgen USB_CLK>;
+ };
+
+ usb1: usb@25400 {
+ compatible = "chipidea,usb2";
+ reg = <0x25400 0x200>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb1_phy>;
+ phy-names = "usb-phy";
+ };
+
+ usb1_phy: phy@25700 {
+ compatible = "sigma,smp8642-usb-phy";
+ reg = <0x25700 0x100>;
+ #phy-cells = <0>;
+ clocks = <&clkgen USB_CLK>;
+ };
+
eth0: ethernet@26000 {
compatible = "sigma,smp8734-ethernet";
reg = <0x26000 0x800>;
aliases {
serial = &uart;
+ eth0 = ð0;
};
memory@80000000 {
reg = <4>;
};
};
+
+&mmc1 {
+ non-removable; /* eMMC */
+};
/* Apalis SD1 */
sdhci@700b0400 {
status = "okay";
- /*
- * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
- * features some magic properties even though the external
- * loopback is disabled and the internal loopback used as per
- * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being
- * set to 0xfffd according to the TRM!
- * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
- */
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
/*
* Toradex Apalis TK1 Module Device Tree
- * Compatible for Revisions 2GB: V1.0A
+ * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A
*/
/ {
model = "Toradex Apalis TK1";
};
dp_hpd_pff0 {
nvidia,pins = "dp_hpd_pff0";
- nvidia,function = "rsvd2";
+ nvidia,function = "dp";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- /*
- * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it
- * features some magic properties even though the
- * external loopback is disabled and the internal
- * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
- * register's SDMMC_SPARE1 bits being set to 0xfffd
- * according to the TRM!
- */
sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
- nvidia,function = "sdmmc3";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- /*
- * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
- * features some magic properties even though the
- * external loopback is disabled and the internal
- * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
- * register's SDMMC_SPARE1 bits being set to 0xfffd
- * according to the TRM!
- */
- sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */
- nvidia,pins = "sdmmc3_clk_lb_out_pee4";
- nvidia,function = "rsvd2";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ sdmmc3_cd_n_pv2 { /* CD# GPIO */
+ nvidia,pins = "sdmmc3_cd_n_pv2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* Apalis SPDIF */
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* GPIO_PI6 aka TEMP_ALERT_L */
+ /* GPIO_PI6 aka TMP451 ALERT#/THERM2# */
pi6 {
nvidia,pins = "pi6";
nvidia,function = "rsvd1";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- sdmmc3_cd_n_pv2 { /* NC */
- nvidia,pins = "sdmmc3_cd_n_pv2";
- nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- };
gpio_x1_aud_px1 { /* NC */
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd2";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
+ /*
+ * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output
+ * driver enabled aka not tristated and input driver
+ * enabled as well as it features some magic properties
+ * even though the external loopback is disabled and the
+ * internal loopback used as per
+ * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
+ * bits being set to 0xfffd according to the TRM!
+ */
+ sdmmc3_clk_lb_out_pee4 { /* NC */
+ nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
};
};
/ {
model = "Acer Chromebook 13 CB5-311";
- compatible = "google,nyan-big", "nvidia,tegra124";
+ compatible = "google,nyan-big-rev7", "google,nyan-big-rev6",
+ "google,nyan-big-rev5", "google,nyan-big-rev4",
+ "google,nyan-big-rev3", "google,nyan-big-rev2",
+ "google,nyan-big-rev1", "google,nyan-big-rev0",
+ "google,nyan-big", "google,nyan", "nvidia,tegra124";
panel: panel {
compatible = "auo,b133xtn01";
};
cam_i2c_scl_pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1";
- nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
cam_i2c_sda_pbb2 {
nvidia,pins = "cam_i2c_sda_pbb2";
- nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
pbb3 {
nvidia,pins = "pbb3";
/ {
model = "HP Chromebook 14";
- compatible = "google,nyan-blaze", "google,nyan", "nvidia,tegra124";
+ compatible = "google,nyan-blaze-rev10", "google,nyan-blaze-rev9",
+ "google,nyan-blaze-rev8", "google,nyan-blaze-rev7",
+ "google,nyan-blaze-rev6", "google,nyan-blaze-rev5",
+ "google,nyan-blaze-rev4", "google,nyan-blaze-rev3",
+ "google,nyan-blaze-rev2", "google,nyan-blaze-rev1",
+ "google,nyan-blaze-rev0", "google,nyan-blaze",
+ "google,nyan", "nvidia,tegra124";
panel: panel {
compatible = "samsung,ltn140at29-301";
};
cam_i2c_scl_pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1";
- nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
cam_i2c_sda_pbb2 {
nvidia,pins = "cam_i2c_sda_pbb2";
- nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
pbb3 {
nvidia,pins = "pbb3";
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
};
temperature-sensor@4c {
reg = <0x9>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(J, 0)
- GPIO_ACTIVE_HIGH>;
+ IRQ_TYPE_EDGE_BOTH>;
ti,ac-detect-gpios = <&gpio
TEGRA_GPIO(J, 0)
GPIO_ACTIVE_HIGH>;
+ ti,external-control;
};
battery: sbs-battery@b {
regulator-name = "+3VS,vdd_pnl";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sdhci@c8000000 {
status = "okay";
+ broken-cd;
bus-width = <4>;
};
/*
* Device Tree Source for UniPhier SoCs default pinctrl settings
*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2017 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
*/
&pinctrl {
+ pinctrl_emmc: emmc_grp {
+ groups = "emmc";
+ function = "emmc";
+ };
+
pinctrl_i2c0: i2c0_grp {
groups = "i2c0";
function = "i2c0";
function = "nand";
};
+ pinctrl_sd: sd_grp {
+ groups = "sd";
+ function = "sd";
+ };
+
+ pinctrl_sd1: sd1_grp {
+ groups = "sd1";
+ function = "sd1";
+ };
+
pinctrl_system_bus: system_bus_grp {
groups = "system_bus", "system_bus_cs1";
function = "system_bus";
#address-cells = <0>;
interrupt-controller;
reg = <0 0x2c001000 0 0x1000>,
- <0 0x2c002000 0 0x1000>,
+ <0 0x2c002000 0 0x2000>,
<0 0x2c004000 0 0x2000>,
<0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0x2c001000 0 0x1000>,
- <0 0x2c002000 0 0x1000>,
+ <0 0x2c002000 0 0x2000>,
<0 0x2c004000 0 0x2000>,
<0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
-#include "vf610.dtsi"
+#include "vf610-zii-dev.dtsi"
/ {
model = "ZII VF610 Development Board, Rev B";
compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610";
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- reg = <0x80000000 0x20000000>;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pinctrl_leds_debug>;
- pinctrl-names = "default";
-
- debug {
- label = "zii:green:debug1";
- gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
mdio-mux {
compatible = "mdio-mux-gpio";
pinctrl-0 = <&pinctrl_mdio_mux>;
#address-cells = <1>;
#size-cells = <0>;
- switch0: switch0@0 {
+ switch0: switch@0 {
compatible = "marvell,mv88e6085";
pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default";
ports {
#address-cells = <1>;
#size-cells = <0>;
+
port@0 {
reg = <0>;
label = "lan0";
reg = <6>;
label = "cpu";
ethernet = <&fec1>;
+
fixed-link {
speed = <100>;
full-duplex;
switch0phy1: switch1phy0@1 {
reg = <1>;
interrupt-parent = <&switch0>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; };
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
switch0phy2: switch1phy0@2 {
reg = <2>;
interrupt-parent = <&switch0>;
#address-cells = <1>;
#size-cells = <0>;
- switch1: switch1@0 {
+ switch1: switch@0 {
compatible = "marvell,mv88e6085";
pinctrl-0 = <&pinctrl_gpio_switch1>;
pinctrl-names = "default";
ports {
#address-cells = <1>;
#size-cells = <0>;
+
port@0 {
reg = <0>;
label = "lan3";
label = "dsa";
link = <&switch2port9>;
phy-mode = "rgmii-txid";
+
fixed-link {
speed = <1000>;
full-duplex;
mdio {
#address-cells = <1>;
#size-cells = <0>;
+
switch1phy0: switch1phy0@0 {
reg = <0>;
interrupt-parent = <&switch1>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
+
switch1phy1: switch1phy0@1 {
reg = <1>;
interrupt-parent = <&switch1>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
+
switch1phy2: switch1phy0@2 {
reg = <2>;
interrupt-parent = <&switch1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
+
port@0 {
reg = <0>;
label = "lan6";
port@3 {
reg = <3>;
label = "optical3";
+
fixed-link {
speed = <1000>;
full-duplex;
port@4 {
reg = <4>;
label = "optical4";
+
fixed-link {
speed = <1000>;
full-duplex;
phy-mode = "rgmii-txid";
link = <&switch1port5
&switch0port5>;
+
fixed-link {
speed = <1000>;
full-duplex;
};
};
- reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_mcu";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- usb0_vbus: regulator-usb0-vbus {
- compatible = "regulator-fixed";
- pinctrl-0 = <&pinctrl_usb_vbus>;
- regulator-name = "usb_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 6 0>;
- };
-
spi0 {
compatible = "spi-gpio";
pinctrl-0 = <&pinctrl_gpio_spi0>;
};
};
-&adc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_adc0_ad5>;
- vref-supply = <®_vcc_3v3_mcu>;
- status = "okay";
-};
-
-&edma0 {
- status = "okay";
-};
-
-&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1>;
- bus-width = <4>;
- status = "okay";
-};
-
-&fec0 {
- phy-mode = "rmii";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec0>;
- status = "okay";
-};
-
-&fec1 {
- phy-mode = "rmii";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- status = "okay";
-
- fixed-link {
- speed = <100>;
- full-duplex;
- };
-
- mdio1: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
- };
-};
-
&i2c0 {
clock-frequency = <100000>;
pinctrl-names = "default";
interrupt-parent = <&gpio2>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
};
-
- lm75@48 {
- compatible = "national,lm75";
- reg = <0x48>;
- };
-
- at24c04@50 {
- compatible = "atmel,24c04";
- reg = <0x50>;
- };
-
- at24c04@52 {
- compatible = "atmel,24c04";
- reg = <0x52>;
- };
-
- ds1682@6b {
- compatible = "dallas,ds1682";
- reg = <0x6b>;
- };
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
};
&i2c2 {
};
};
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usbdev0 {
- disable-over-current;
- vbus-supply = <&usb0_vbus>;
- dr_mode = "host";
- status = "okay";
-};
-
-&usbh1 {
- disable-over-current;
- status = "okay";
-};
-
-&usbmisc0 {
- status = "okay";
-};
-
-&usbmisc1 {
- status = "okay";
-};
-
-&usbphy0 {
- status = "okay";
-};
-
-&usbphy1 {
- status = "okay";
-};
&iomuxc {
- pinctrl_adc0_ad5: adc0ad5grp {
- fsl,pins = <
- VF610_PAD_PTC30__ADC0_SE5 0x00a1
- >;
- };
-
- pinctrl_dspi0: dspi0grp {
- fsl,pins = <
- VF610_PAD_PTB18__DSPI0_CS1 0x1182
- VF610_PAD_PTB19__DSPI0_CS0 0x1182
- VF610_PAD_PTB20__DSPI0_SIN 0x1181
- VF610_PAD_PTB21__DSPI0_SOUT 0x1182
- VF610_PAD_PTB22__DSPI0_SCK 0x1182
- >;
- };
-
- pinctrl_dspi2: dspi2grp {
- fsl,pins = <
- VF610_PAD_PTD31__DSPI2_CS1 0x1182
- VF610_PAD_PTD30__DSPI2_CS0 0x1182
- VF610_PAD_PTD29__DSPI2_SIN 0x1181
- VF610_PAD_PTD28__DSPI2_SOUT 0x1182
- VF610_PAD_PTD27__DSPI2_SCK 0x1182
- >;
- };
-
- pinctrl_esdhc1: esdhc1grp {
- fsl,pins = <
- VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
- VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
- VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
- VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
- VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
- VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
- VF610_PAD_PTA7__GPIO_134 0x219d
- >;
- };
-
- pinctrl_fec0: fec0grp {
- fsl,pins = <
- VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2
- VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3
- VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
- VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
- VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
- VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
- VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
- VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
- VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
- >;
- };
-
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- VF610_PAD_PTA6__RMII_CLKIN 0x30d1
- VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
- VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
- VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
- VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
- VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
- VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
- VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
- VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
- >;
- };
-
pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
fsl,pins = <
VF610_PAD_PTE27__GPIO_132 0x33e2
>;
};
- pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
- fsl,pins = <
- VF610_PAD_PTE14__GPIO_119 0x31c2
- >;
- };
-
- pinctrl_i2c0: i2c0grp {
- fsl,pins = <
- VF610_PAD_PTB14__I2C0_SCL 0x37ff
- VF610_PAD_PTB15__I2C0_SDA 0x37ff
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- VF610_PAD_PTB16__I2C1_SCL 0x37ff
- VF610_PAD_PTB17__I2C1_SDA 0x37ff
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- VF610_PAD_PTA22__I2C2_SCL 0x37ff
- VF610_PAD_PTA23__I2C2_SDA 0x37ff
- >;
- };
-
- pinctrl_leds_debug: pinctrl-leds-debug {
- fsl,pins = <
- VF610_PAD_PTD20__GPIO_74 0x31c2
- >;
- };
-
pinctrl_mdio_mux: pinctrl-mdio-mux {
fsl,pins = <
VF610_PAD_PTA18__GPIO_8 0x31c2
VF610_PAD_PTB28__GPIO_98 0x219d
>;
};
-
- pinctrl_pwm0: pwm0grp {
- fsl,pins = <
- VF610_PAD_PTB0__FTM0_CH0 0x1582
- VF610_PAD_PTB1__FTM0_CH1 0x1582
- VF610_PAD_PTB2__FTM0_CH2 0x1582
- VF610_PAD_PTB3__FTM0_CH3 0x1582
- >;
- };
-
- pinctrl_qspi0: qspi0grp {
- fsl,pins = <
- VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
- VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
- VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
- VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
- VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
- VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
- >;
- };
-
- pinctrl_uart0: uart0grp {
- fsl,pins = <
- VF610_PAD_PTB10__UART0_TX 0x21a2
- VF610_PAD_PTB11__UART0_RX 0x21a1
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- VF610_PAD_PTB23__UART1_TX 0x21a2
- VF610_PAD_PTB24__UART1_RX 0x21a1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- VF610_PAD_PTD0__UART2_TX 0x21a2
- VF610_PAD_PTD1__UART2_RX 0x21a1
- >;
- };
-
- pinctrl_usb_vbus: pinctrl-usb-vbus {
- fsl,pins = <
- VF610_PAD_PTA16__GPIO_6 0x31c2
- >;
- };
-
- pinctrl_usb0_host: usb0-host-grp {
- fsl,pins = <
- VF610_PAD_PTD6__GPIO_85 0x0062
- >;
- };
};
--- /dev/null
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610-zii-dev.dtsi"
+
+/ {
+ model = "ZII VF610 Development Board, Rev C";
+ compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610";
+
+ mdio-mux {
+ compatible = "mdio-mux-gpio";
+ pinctrl-0 = <&pinctrl_mdio_mux>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH
+ &gpio0 9 GPIO_ACTIVE_HIGH
+ &gpio0 25 GPIO_ACTIVE_HIGH>;
+ mdio-parent-bus = <&mdio1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio_mux_1: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0: switch@0 {
+ compatible = "marvell,mv88e6190";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ dsa,member = <0 0>;
+ eeprom-length = <512>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ switch0port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "xgmii";
+ link = <&switch1port10>;
+ };
+ };
+ };
+ };
+
+ mdio_mux_2: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1: switch@0 {
+ compatible = "marvell,mv88e6190";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ dsa,member = <0 1>;
+ eeprom-length = <512>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "lan5";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan6";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan7";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan8";
+ };
+
+
+ switch1port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "xgmii";
+ link = <&switch0port10>;
+ };
+ };
+ };
+ };
+
+ mdio_mux_4: mdio@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&dspi0 {
+ bus-num = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi0>;
+ status = "okay";
+ spi-num-chipselects = <2>;
+
+ m25p128@0 {
+ compatible = "m25p128", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+
+ atzb-rf-233@1 {
+ compatible = "atmel,at86rf233";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctr_atzb_rf_233>;
+
+ spi-max-frequency = <7500000>;
+ reg = <1>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpio3>;
+ xtal-trim = /bits/ 8 <0x06>;
+
+ sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+
+ fsl,spi-cs-sck-delay = <180>;
+ fsl,spi-sck-cs-delay = <250>;
+ };
+};
+
+&i2c0 {
+ /*
+ * U712
+ *
+ * Exposed signals:
+ * P1 - WE2_CMD
+ * P2 - WE2_CLK
+ */
+ gpio5: pca9557@18 {
+ compatible = "nxp,pca9557";
+ reg = <0x18>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /*
+ * U121
+ *
+ * Exposed signals:
+ * I/O0 - ENET_SWR_EN
+ * I/O1 - ESW1_RESETn
+ * I/O2 - ARINC_RESET
+ * I/O3 - DD1_IO_RESET
+ * I/O4 - ESW2_RESETn
+ * I/O5 - ESW3_RESETn
+ * I/O6 - ESW4_RESETn
+ * I/O8 - TP909
+ * I/O9 - FEM_SEL
+ * I/O10 - WIFI_RESETn
+ * I/O11 - PHY_RSTn
+ * I/O12 - OPT1_SD
+ * I/O13 - OPT2_SD
+ * I/O14 - OPT1_TX_DIS
+ * I/O15 - OPT2_TX_DIS
+ */
+ gpio6: sx1503@20 {
+ compatible = "semtech,sx1503q";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sx1503_20>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ interrupt-controller;
+
+ enet_swr_en {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "enet-swr-en";
+ };
+ };
+
+ /*
+ * U715
+ *
+ * Exposed signals:
+ * IO0 - WE1_CLK
+ * IO1 - WE1_CMD
+ */
+ gpio7: pca9554@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ };
+};
+
+&i2c1 {
+ at24mac602@00 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ read-only;
+ };
+};
+
+&i2c2 {
+ tca9548@70 {
+ compatible = "nxp,pca9548";
+ pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ sfp2: at24c04@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ sfp3: at24c04@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&gpio0 {
+ eth0_intrp {
+ gpio-hog;
+ gpios = <23 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "sx1503-irq";
+ };
+};
+
+&gpio3 {
+ eth0_intrp {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "eth0-intrp";
+ };
+};
+
+&fec0 {
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec0_phy_int>;
+
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0>;
+ };
+ };
+};
+
+&iomuxc {
+ pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
+ fsl,pins = <
+ VF610_PAD_PTB2__GPIO_24 0x31c2
+ VF610_PAD_PTE27__GPIO_132 0x33e2
+ >;
+ };
+
+
+ pinctrl_sx1503_20: pinctrl-sx1503-20 {
+ fsl,pins = <
+ VF610_PAD_PTB1__GPIO_23 0x219d
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA20__UART3_TX 0x21a2
+ VF610_PAD_PTA21__UART3_RX 0x21a1
+ >;
+ };
+
+ pinctrl_mdio_mux: pinctrl-mdio-mux {
+ fsl,pins = <
+ VF610_PAD_PTA18__GPIO_8 0x31c2
+ VF610_PAD_PTA19__GPIO_9 0x31c2
+ VF610_PAD_PTB3__GPIO_25 0x31c2
+ >;
+ };
+
+ pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
+ fsl,pins = <
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "vf610.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ usb0_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-0 = <&pinctrl_usb_vbus>;
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 6 0>;
+ };
+};
+
+&adc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_ad5>;
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec0 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec0>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ lm75@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ at24c04@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ };
+
+ at24c04@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+
+ ds1682@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbdev0 {
+ disable-over-current;
+ vbus-supply = <&usb0_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbmisc0 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_adc0_ad5: adc0ad5grp {
+ fsl,pins = <
+ VF610_PAD_PTC30__ADC0_SE5 0x00a1
+ >;
+ };
+
+ pinctrl_dspi0: dspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTB18__DSPI0_CS1 0x1182
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
+
+ pinctrl_dspi2: dspi2grp {
+ fsl,pins = <
+ VF610_PAD_PTD31__DSPI2_CS1 0x1182
+ VF610_PAD_PTD30__DSPI2_CS0 0x1182
+ VF610_PAD_PTD29__DSPI2_SIN 0x1181
+ VF610_PAD_PTD28__DSPI2_SOUT 0x1182
+ VF610_PAD_PTD27__DSPI2_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTA7__GPIO_134 0x219d
+ >;
+ };
+
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+ fsl,pins = <
+ VF610_PAD_PTB22__GPIO_44 0x33e2
+ VF610_PAD_PTB21__GPIO_43 0x33e2
+ VF610_PAD_PTB20__GPIO_42 0x33e1
+ VF610_PAD_PTB19__GPIO_41 0x33e2
+ VF610_PAD_PTB18__GPIO_40 0x33e2
+ >;
+ };
+
+ pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+ fsl,pins = <
+ VF610_PAD_PTE14__GPIO_119 0x31c2
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c0_gpio: i2c0grp-gpio {
+ fsl,pins = <
+ VF610_PAD_PTB14__GPIO_36 0x31c2
+ VF610_PAD_PTB15__GPIO_37 0x31c2
+ >;
+ };
+
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ VF610_PAD_PTA22__I2C2_SCL 0x37ff
+ VF610_PAD_PTA23__I2C2_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD20__GPIO_74 0x31c2
+ >;
+ };
+
+ pinctrl_qspi0: qspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB23__UART1_TX 0x21a2
+ VF610_PAD_PTB24__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ >;
+ };
+
+ pinctrl_usb_vbus: pinctrl-usb-vbus {
+ fsl,pins = <
+ VF610_PAD_PTA16__GPIO_6 0x31c2
+ >;
+ };
+
+ pinctrl_usb0_host: usb0-host-grp {
+ fsl,pins = <
+ VF610_PAD_PTD6__GPIO_85 0x0062
+ >;
+ };
+};
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
- * This file is distributed in the hope that it will be useful
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Or, alternatively
+ * Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
+ * restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
-static void __clk_enable(struct clk *clk)
+void davinci_clk_enable(struct clk *clk)
{
if (clk->parent)
- __clk_enable(clk->parent);
+ davinci_clk_enable(clk->parent);
if (clk->usecount++ == 0) {
if (clk->flags & CLK_PSC)
davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
}
}
-static void __clk_disable(struct clk *clk)
+void davinci_clk_disable(struct clk *clk)
{
if (WARN_ON(clk->usecount == 0))
return;
clk->clk_disable(clk);
}
if (clk->parent)
- __clk_disable(clk->parent);
+ davinci_clk_disable(clk->parent);
}
int davinci_clk_reset(struct clk *clk, bool reset)
return -EINVAL;
spin_lock_irqsave(&clockfw_lock, flags);
- __clk_enable(clk);
+ davinci_clk_enable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
return 0;
return;
spin_lock_irqsave(&clockfw_lock, flags);
- __clk_disable(clk);
+ davinci_clk_disable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
int davinci_set_refclk_rate(unsigned long rate);
int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
int davinci_clk_reset(struct clk *clk, bool reset);
+void davinci_clk_enable(struct clk *clk);
+void davinci_clk_disable(struct clk *clk);
extern struct platform_device davinci_wdt_device;
extern void davinci_watchdog_reset(struct platform_device *);
.gpsc = 1,
};
+/*
+ * In order to avoid adding the emac_clk to the clock lookup table twice (and
+ * screwing up the linked list in the process) create a separate clock for
+ * mdio inheriting the rate from emac_clk.
+ */
+static struct clk mdio_clk = {
+ .name = "mdio",
+ .parent = &emac_clk,
+};
+
static struct clk mcasp_clk = {
.name = "mcasp",
.parent = &async3_clk,
.flags = ALWAYS_ENABLED,
};
+/*
+ * In order to avoid adding the aemif_clk to the clock lookup table twice (and
+ * screwing up the linked list in the process) create a separate clock for
+ * nand inheriting the rate from aemif_clk.
+ */
+static struct clk aemif_nand_clk = {
+ .name = "nand",
+ .parent = &aemif_clk,
+};
+
static struct clk usb11_clk = {
.name = "usb11",
.parent = &pll0_sysclk4,
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "rmii", &rmii_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
- CLK("davinci_mdio.0", "fck", &emac_clk),
+ CLK("davinci_mdio.0", "fck", &mdio_clk),
CLK("davinci-mcasp.0", NULL, &mcasp_clk),
CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk),
CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK("ti-aemif", NULL, &aemif_clk),
- CLK(NULL, "aemif", &aemif_clk),
+ /*
+ * The only user of this clock is davinci_nand and it get's it through
+ * con_id. The nand node itself is created from within the aemif
+ * driver to guarantee that it's probed after the aemif timing
+ * parameters are configured. of_dev_auxdata is not accessible from
+ * the aemif driver and can't be passed to of_platform_populate(). For
+ * that reason we're leaving the dev_id here as NULL.
+ */
+ CLK(NULL, "aemif", &aemif_nand_clk),
CLK("ohci-da8xx", "usb11", &usb11_clk),
CLK("musb-da8xx", "usb20", &usb20_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
#define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000
+static struct clk *usb20_clk;
+
static struct platform_device da8xx_usb_phy = {
.name = "da8xx-usb-phy",
.id = -1,
static void usb20_phy_clk_enable(struct clk *clk)
{
- struct clk *usb20_clk;
- int err;
u32 val;
u32 timeout = 500000; /* 500 msec */
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
- usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
- if (IS_ERR(usb20_clk)) {
- pr_err("could not get usb20 clk: %ld\n", PTR_ERR(usb20_clk));
- return;
- }
-
/* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */
- err = clk_prepare_enable(usb20_clk);
- if (err) {
- pr_err("failed to enable usb20 clk: %d\n", err);
- clk_put(usb20_clk);
- return;
- }
+ davinci_clk_enable(usb20_clk);
/*
* Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
pr_err("Timeout waiting for USB 2.0 PHY clock good\n");
done:
- clk_disable_unprepare(usb20_clk);
- clk_put(usb20_clk);
+ davinci_clk_disable(usb20_clk);
}
static void usb20_phy_clk_disable(struct clk *clk)
int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin)
{
struct clk *parent;
- int ret = 0;
+ int ret;
+
+ usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
+ ret = PTR_ERR_OR_ZERO(usb20_clk);
+ if (ret)
+ return ret;
parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux");
- if (IS_ERR(parent))
- return PTR_ERR(parent);
+ ret = PTR_ERR_OR_ZERO(parent);
+ if (ret) {
+ clk_put(usb20_clk);
+ return ret;
+ }
usb20_phy_clk.parent = parent;
ret = clk_register(&usb20_phy_clk);
return pen_release != -1 ? ret : 0;
}
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-
-static void __init exynos_smp_init_cpus(void)
-{
- void __iomem *scu_base = scu_base_addr();
- unsigned int i, ncores;
-
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
- ncores = scu_base ? scu_get_core_count(scu_base) : 1;
- else
- /*
- * CPU Nodes are passed thru DT and set_cpu_possible
- * is set by "arm_dt_init_cpu_maps".
- */
- return;
-
- /* sanity check */
- if (ncores > nr_cpu_ids) {
- pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
- ncores, nr_cpu_ids);
- ncores = nr_cpu_ids;
- }
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
-}
-
static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
#endif /* CONFIG_HOTPLUG_CPU */
const struct smp_operations exynos_smp_ops __initconst = {
- .smp_init_cpus = exynos_smp_init_cpus,
.smp_prepare_cpus = exynos_smp_prepare_cpus,
.smp_secondary_init = exynos_secondary_init,
.smp_boot_secondary = exynos_boot_secondary,
};
DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
- .map_io = debug_ll_io_init,
.init_early = imx1_init_early,
.init_irq = imx1_init_irq,
.dt_compat = imx1_dt_board_compat,
# Common support
obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \
- common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+ common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o omap-headsmp.o sram.o drm.o
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
.init_late = am43xx_init_late,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
- .init_time = omap4_local_timer_init,
+ .init_time = omap3_gptimer_timer_init,
.dt_compat = am43_boards_compat,
.restart = omap44xx_restart,
MACHINE_END
+++ /dev/null
-/*
- * OMAP2+ specific gpio initialization
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author:
- * Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/of.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-#include "omap-pm.h"
-
-#include "powerdomain.h"
-
-static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
-{
- struct platform_device *pdev;
- struct omap_gpio_platform_data *pdata;
- struct omap_gpio_dev_attr *dev_attr;
- char *name = "omap_gpio";
- int id;
- struct powerdomain *pwrdm;
-
- /*
- * extract the device id from name field available in the
- * hwmod database and use the same for constructing ids for
- * gpio devices.
- * CAUTION: Make sure the name in the hwmod database does
- * not change. If changed, make corresponding change here
- * or make use of static variable mechanism to handle this.
- */
- sscanf(oh->name, "gpio%d", &id);
-
- pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL);
- if (!pdata) {
- pr_err("gpio%d: Memory allocation failed\n", id);
- return -ENOMEM;
- }
-
- dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
- pdata->bank_width = dev_attr->bank_width;
- pdata->dbck_flag = dev_attr->dbck_flag;
- pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
- pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
- if (!pdata->regs) {
- pr_err("gpio%d: Memory allocation failed\n", id);
- kfree(pdata);
- return -ENOMEM;
- }
-
- switch (oh->class->rev) {
- case 0:
- if (id == 1)
- /* non-wakeup GPIO pins for OMAP2 Bank1 */
- pdata->non_wakeup_gpios = 0xe203ffc0;
- else if (id == 2)
- /* non-wakeup GPIO pins for OMAP2 Bank2 */
- pdata->non_wakeup_gpios = 0x08700040;
- /* fall through */
-
- case 1:
- pdata->regs->revision = OMAP24XX_GPIO_REVISION;
- pdata->regs->direction = OMAP24XX_GPIO_OE;
- pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
- pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
- pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
- pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
- pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
- pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
- pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
- pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2;
- pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
- pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
- pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
- pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
- pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
- pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN;
- pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
- pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
- pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
- pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
- break;
- case 2:
- pdata->regs->revision = OMAP4_GPIO_REVISION;
- pdata->regs->direction = OMAP4_GPIO_OE;
- pdata->regs->datain = OMAP4_GPIO_DATAIN;
- pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
- pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
- pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
- pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0;
- pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1;
- pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
- pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
- pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
- pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1;
- pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
- pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
- pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
- pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
- pdata->regs->ctrl = OMAP4_GPIO_CTRL;
- pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0;
- pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
- pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
- pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
- pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
- break;
- default:
- WARN(1, "Invalid gpio bank_type\n");
- kfree(pdata->regs);
- kfree(pdata);
- return -EINVAL;
- }
-
- pwrdm = omap_hwmod_get_pwrdm(oh);
- pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
-
- pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata));
- kfree(pdata);
-
- if (IS_ERR(pdev)) {
- WARN(1, "Can't build omap_device for %s:%s.\n",
- name, oh->name);
- return PTR_ERR(pdev);
- }
-
- return 0;
-}
-
-/*
- * gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence gpio_init is a omap_postcore_initcall.
- */
-static int __init omap2_gpio_init(void)
-{
- /* If dtb is there, the devices will be created dynamically */
- if (of_have_populated_dt())
- return -ENODEV;
-
- return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL);
-}
-omap_postcore_initcall(omap2_gpio_init);
int ret = 0;
char name[MOD_CLK_MAX_NAME_LEN];
struct clk *clk;
+ static const char modck[] = "_mod_ck";
- /* +7 magic comes from '_mod_ck' suffix */
- if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN)
+ if (strlen(oh->name) >= MOD_CLK_MAX_NAME_LEN - strlen(modck))
pr_warn("%s: warning: cropping name for %s\n", __func__,
oh->name);
- strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7);
- strcat(name, "_mod_ck");
+ strlcpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - strlen(modck));
+ strlcat(name, modck, MOD_CLK_MAX_NAME_LEN);
clk = clk_get(NULL, name);
if (!IS_ERR(clk)) {
extern struct omap_hwmod_irq_info omap2_dispc_irqs[];
extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio1_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio2_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio3_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio4_irqs[];
extern struct omap_hwmod_irq_info omap2_dma_system_irqs[];
extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[];
GFP_KERNEL);
if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
- !prcm_irq_setup->priority_mask) {
- pr_err("PRCM: kzalloc failed\n");
+ !prcm_irq_setup->priority_mask)
goto err;
- }
memset(mask, 0, sizeof(mask));
}
#endif /* CONFIG_ARCH_OMAP3 */
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
+ defined(CONFIG_SOC_AM43XX)
void __init omap3_gptimer_timer_init(void)
{
__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
1, "timer_sys_ck", "ti,timer-alwon", true);
-
- clocksource_probe();
+ if (of_have_populated_dt())
+ clocksource_probe();
}
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
- defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
+ defined(CONFIG_SOC_DRA7XX)
static void __init omap4_sync32k_timer_init(void)
{
__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
};
+static const struct dma_slave_map s3c2410_dma_slave_map[] = {
+ { "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI },
+ { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX },
+ { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX },
+ { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX },
+ { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX },
+ /*
+ * The DMA request source[1] (DMACH_UARTx_SRC2) are
+ * not used in the UART driver.
+ */
+ { "s3c2410-uart.0", "rx", (void *)DMACH_UART0 },
+ { "s3c2410-uart.0", "tx", (void *)DMACH_UART0 },
+ { "s3c2410-uart.1", "rx", (void *)DMACH_UART1 },
+ { "s3c2410-uart.1", "tx", (void *)DMACH_UART1 },
+ { "s3c2410-uart.2", "rx", (void *)DMACH_UART2 },
+ { "s3c2410-uart.2", "tx", (void *)DMACH_UART2 },
+ { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+ { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+ { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+ { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2410_dma_channels,
.num_channels = DMACH_MAX,
+ .slave_map = s3c2410_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map),
};
struct platform_device s3c2410_device_dma = {
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
};
+static const struct dma_slave_map s3c2412_dma_slave_map[] = {
+ { "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI },
+ { "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX },
+ { "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX },
+ { "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX },
+ { "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX },
+ { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+ { "s3c2412-iis", "rx", (void *)DMACH_I2S_IN },
+ { "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT },
+ { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+ { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2412_dma_channels,
.num_channels = DMACH_MAX,
+ .slave_map = s3c2412_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map),
};
struct platform_device s3c2412_device_dma = {
[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
};
+static const struct dma_slave_map s3c2443_dma_slave_map[] = {
+ { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
+ { "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX },
+ { "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX },
+ { "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX },
+ { "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX },
+ { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
+ { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
+ { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+ { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+};
+
static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
.num_phy_channels = 6,
.channels = s3c2443_dma_channels,
.num_channels = DMACH_MAX,
+ .slave_map = s3c2443_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map),
};
struct platform_device s3c2443_device_dma = {
status = "disabled";
};
};
+
+ vpu: vpu@d0100000 {
+ compatible = "amlogic,meson-gx-vpu";
+ reg = <0x0 0xd0100000 0x0 0x100000>,
+ <0x0 0xc883c000 0x0 0x1000>,
+ <0x0 0xc8838000 0x0 0x1000>;
+ reg-names = "vpu", "hhi", "dmc";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* CVBS VDAC output port */
+ cvbs_vdac_port: port@0 {
+ reg = <0>;
+ };
+ };
};
};
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
&uart_AO {
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
+
+&vpu {
+ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+};
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
&uart_AO {
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
#include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h>
-#include <dt-bindings/gpio/meson-gxbb-gpio.h>
+#include <dt-bindings/gpio/meson-gxl-gpio.h>
/ {
compatible = "amlogic,meson-gxl";
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
+
+&vpu {
+ compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+};
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
max-speed = <1000>;
};
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
};
};
};
+
+&vpu {
+ compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
+};
#address-cells = <0>;
interrupt-controller;
reg = <0x0 0x2c001000 0 0x1000>,
- <0x0 0x2c002000 0 0x1000>,
+ <0x0 0x2c002000 0 0x2000>,
<0x0 0x2c004000 0 0x2000>,
<0x0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;
reg = <0x0 0x86000000 0x0 0x200000>;
no-map;
};
+
+ memory@85800000 {
+ reg = <0x0 0x85800000 0x0 0x800000>;
+ no-map;
+ };
+
+ memory@86200000 {
+ reg = <0x0 0x86200000 0x0 0x2600000>;
+ no-map;
+ };
};
cpus {
power-source = <3300>;
};
- sdhi0_pins_uhs: sd0 {
+ sdhi0_pins_uhs: sd0_uhs {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_HISI_KIRIN=m
+CONFIG_DRM_MESON=m
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_BACKLIGHT_GENERIC=m
--- /dev/null
+#ifndef __ASM_ASM_UACCESS_H
+#define __ASM_ASM_UACCESS_H
+
+#include <asm/alternative.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/sysreg.h>
+#include <asm/assembler.h>
+
+/*
+ * User access enabling/disabling macros.
+ */
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+ .macro __uaccess_ttbr0_disable, tmp1
+ mrs \tmp1, ttbr1_el1 // swapper_pg_dir
+ add \tmp1, \tmp1, #SWAPPER_DIR_SIZE // reserved_ttbr0 at the end of swapper_pg_dir
+ msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1
+ isb
+ .endm
+
+ .macro __uaccess_ttbr0_enable, tmp1
+ get_thread_info \tmp1
+ ldr \tmp1, [\tmp1, #TSK_TI_TTBR0] // load saved TTBR0_EL1
+ msr ttbr0_el1, \tmp1 // set the non-PAN TTBR0_EL1
+ isb
+ .endm
+
+ .macro uaccess_ttbr0_disable, tmp1
+alternative_if_not ARM64_HAS_PAN
+ __uaccess_ttbr0_disable \tmp1
+alternative_else_nop_endif
+ .endm
+
+ .macro uaccess_ttbr0_enable, tmp1, tmp2
+alternative_if_not ARM64_HAS_PAN
+ save_and_disable_irq \tmp2 // avoid preemption
+ __uaccess_ttbr0_enable \tmp1
+ restore_irq \tmp2
+alternative_else_nop_endif
+ .endm
+#else
+ .macro uaccess_ttbr0_disable, tmp1
+ .endm
+
+ .macro uaccess_ttbr0_enable, tmp1, tmp2
+ .endm
+#endif
+
+/*
+ * These macros are no-ops when UAO is present.
+ */
+ .macro uaccess_disable_not_uao, tmp1
+ uaccess_ttbr0_disable \tmp1
+alternative_if ARM64_ALT_PAN_NOT_UAO
+ SET_PSTATE_PAN(1)
+alternative_else_nop_endif
+ .endm
+
+ .macro uaccess_enable_not_uao, tmp1, tmp2
+ uaccess_ttbr0_enable \tmp1, \tmp2
+alternative_if ARM64_ALT_PAN_NOT_UAO
+ SET_PSTATE_PAN(0)
+alternative_else_nop_endif
+ .endm
+
+#endif
struct task_struct;
+/*
+ * We don't use read_sysreg() as we want the compiler to cache the value where
+ * possible.
+ */
static __always_inline struct task_struct *get_current(void)
{
- return (struct task_struct *)read_sysreg(sp_el0);
+ unsigned long sp_el0;
+
+ asm ("mrs %0, sp_el0" : "=r" (sp_el0));
+
+ return (struct task_struct *)sp_el0;
}
#define current get_current()
#include <asm/kernel-pgtable.h>
#include <asm/sysreg.h>
-#ifndef __ASSEMBLY__
-
/*
* User space memory access functions
*/
extern __must_check long strlen_user(const char __user *str);
extern __must_check long strnlen_user(const char __user *str, long n);
-#else /* __ASSEMBLY__ */
-
-#include <asm/assembler.h>
-
-/*
- * User access enabling/disabling macros.
- */
-#ifdef CONFIG_ARM64_SW_TTBR0_PAN
- .macro __uaccess_ttbr0_disable, tmp1
- mrs \tmp1, ttbr1_el1 // swapper_pg_dir
- add \tmp1, \tmp1, #SWAPPER_DIR_SIZE // reserved_ttbr0 at the end of swapper_pg_dir
- msr ttbr0_el1, \tmp1 // set reserved TTBR0_EL1
- isb
- .endm
-
- .macro __uaccess_ttbr0_enable, tmp1
- get_thread_info \tmp1
- ldr \tmp1, [\tmp1, #TSK_TI_TTBR0] // load saved TTBR0_EL1
- msr ttbr0_el1, \tmp1 // set the non-PAN TTBR0_EL1
- isb
- .endm
-
- .macro uaccess_ttbr0_disable, tmp1
-alternative_if_not ARM64_HAS_PAN
- __uaccess_ttbr0_disable \tmp1
-alternative_else_nop_endif
- .endm
-
- .macro uaccess_ttbr0_enable, tmp1, tmp2
-alternative_if_not ARM64_HAS_PAN
- save_and_disable_irq \tmp2 // avoid preemption
- __uaccess_ttbr0_enable \tmp1
- restore_irq \tmp2
-alternative_else_nop_endif
- .endm
-#else
- .macro uaccess_ttbr0_disable, tmp1
- .endm
-
- .macro uaccess_ttbr0_enable, tmp1, tmp2
- .endm
-#endif
-
-/*
- * These macros are no-ops when UAO is present.
- */
- .macro uaccess_disable_not_uao, tmp1
- uaccess_ttbr0_disable \tmp1
-alternative_if ARM64_ALT_PAN_NOT_UAO
- SET_PSTATE_PAN(1)
-alternative_else_nop_endif
- .endm
-
- .macro uaccess_enable_not_uao, tmp1, tmp2
- uaccess_ttbr0_enable \tmp1, \tmp2
-alternative_if ARM64_ALT_PAN_NOT_UAO
- SET_PSTATE_PAN(0)
-alternative_else_nop_endif
- .endm
-
-#endif /* __ASSEMBLY__ */
-
#endif /* __ASM_UACCESS_H */
#include <asm/memory.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
#include <asm/unistd.h>
/*
*/
#include <linux/linkage.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
.text
#include <linux/linkage.h>
#include <asm/cache.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
/*
* Copy from user space to a kernel buffer (alignment handled by the hardware)
#include <linux/linkage.h>
#include <asm/cache.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
/*
* Copy from user space to user space (alignment handled by the hardware)
#include <linux/linkage.h>
#include <asm/cache.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
/*
* Copy to user space from a kernel buffer (alignment handled by the hardware)
#include <asm/assembler.h>
#include <asm/cpufeature.h>
#include <asm/alternative.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
/*
* flush_icache_range(start,end)
static int __init arm64_dma_init(void)
{
- if (swiotlb_force || max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
+ if (swiotlb_force == SWIOTLB_FORCE ||
+ max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
swiotlb = 1;
return atomic_pool_init();
break;
pud = pud_offset(pgd, addr);
- printk(", *pud=%016llx", pud_val(*pud));
+ pr_cont(", *pud=%016llx", pud_val(*pud));
if (pud_none(*pud) || pud_bad(*pud))
break;
pmd = pmd_offset(pud, addr);
- printk(", *pmd=%016llx", pmd_val(*pmd));
+ pr_cont(", *pmd=%016llx", pmd_val(*pmd));
if (pmd_none(*pmd) || pmd_bad(*pmd))
break;
pte = pte_offset_map(pmd, addr);
- printk(", *pte=%016llx", pte_val(*pte));
+ pr_cont(", *pte=%016llx", pte_val(*pte));
pte_unmap(pte);
} while(0);
- printk("\n");
+ pr_cont("\n");
}
#ifdef CONFIG_ARM64_HW_AFDBM
*/
void __init mem_init(void)
{
- if (swiotlb_force || max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
+ if (swiotlb_force == SWIOTLB_FORCE ||
+ max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT))
swiotlb_init(1);
set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <linux/uaccess.h>
+#include <asm/asm-uaccess.h>
#include <xen/interface/xen.h>
uasm_i_and(&p, V0, V0, AT);
uasm_i_lui(&p, AT, ST0_CU0 >> 16);
uasm_i_or(&p, V0, V0, AT);
+#ifdef CONFIG_64BIT
+ uasm_i_ori(&p, V0, V0, ST0_SX | ST0_UX);
+#endif
uasm_i_mtc0(&p, V0, C0_STATUS);
uasm_i_ehb(&p);
/* Setup status register for running guest in UM */
uasm_i_ori(&p, V1, V1, ST0_EXL | KSU_USER | ST0_IE);
- UASM_i_LA(&p, AT, ~(ST0_CU0 | ST0_MX));
+ UASM_i_LA(&p, AT, ~(ST0_CU0 | ST0_MX | ST0_SX | ST0_UX));
uasm_i_and(&p, V1, V1, AT);
uasm_i_mtc0(&p, V1, C0_STATUS);
uasm_i_ehb(&p);
dump_handler("kvm_exit", gebase + 0x2000, vcpu->arch.vcpu_run);
/* Invalidate the icache for these ranges */
- local_flush_icache_range((unsigned long)gebase,
- (unsigned long)gebase + ALIGN(size, PAGE_SIZE));
+ flush_icache_range((unsigned long)gebase,
+ (unsigned long)gebase + ALIGN(size, PAGE_SIZE));
/*
* Allocate comm page for guest kernel, a TLB will be reserved for
/* Read-only sections, merged into text segment: */
. = LOAD_BASE ;
+ _text = .;
+
/* _s_kernel_ro must be page aligned */
. = ALIGN(PAGE_SIZE);
_s_kernel_ro = .;
#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_32BIT 4 /* 32 bit binary */
#define TIF_MEMDIE 5 /* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */
#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */
#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
#define TIF_SINGLESTEP 9 /* single stepping? */
cr16_hz = 100 * PAGE0->mem_10msec; /* Hz */
- /* register at clocksource framework */
- clocksource_register_hz(&clocksource_cr16, cr16_hz);
-
/* register as sched_clock source */
sched_clock_register(read_cr16_sched_clock, BITS_PER_LONG, cr16_hz);
}
+
+static int __init init_cr16_clocksource(void)
+{
+ /*
+ * The cr16 interval timers are not syncronized across CPUs, so mark
+ * them unstable and lower rating on SMP systems.
+ */
+ if (num_online_cpus() > 1) {
+ clocksource_cr16.flags = CLOCK_SOURCE_UNSTABLE;
+ clocksource_cr16.rating = 0;
+ }
+
+ /* register at clocksource framework */
+ clocksource_register_hz(&clocksource_cr16,
+ 100 * PAGE0->mem_10msec);
+
+ return 0;
+}
+
+device_initcall(init_cr16_clocksource);
tsk->comm, code, address);
print_vma_addr(KERN_CONT " in ", regs->iaoq[0]);
- pr_cont(" trap #%lu: %s%c", code, trap_name(code),
+ pr_cont("\ntrap #%lu: %s%c", code, trap_name(code),
vma ? ',':'\n');
if (vma)
--- /dev/null
+#ifndef _ASM_S390_PROTOTYPES_H
+
+#include <linux/kvm_host.h>
+#include <linux/ftrace.h>
+#include <asm/fpu/api.h>
+#include <asm-generic/asm-prototypes.h>
+
+#endif /* _ASM_S390_PROTOTYPES_H */
* Update process times based on virtual cpu times stored by entry.S
* to the lowcore fields user_timer, system_timer & steal_clock.
*/
-static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
+static int do_account_vtime(struct task_struct *tsk)
{
u64 timer, clock, user, system, steal;
u64 user_scaled, system_scaled;
}
account_user_time(tsk, user);
tsk->utimescaled += user_scaled;
- account_system_time(tsk, hardirq_offset, system);
+ account_system_time(tsk, 0, system);
tsk->stimescaled += system_scaled;
steal = S390_lowcore.steal_timer;
void vtime_task_switch(struct task_struct *prev)
{
- do_account_vtime(prev, 0);
+ do_account_vtime(prev);
prev->thread.user_timer = S390_lowcore.user_timer;
prev->thread.system_timer = S390_lowcore.system_timer;
S390_lowcore.user_timer = current->thread.user_timer;
*/
void vtime_account_user(struct task_struct *tsk)
{
- if (do_account_vtime(tsk, HARDIRQ_OFFSET))
+ if (do_account_vtime(tsk))
virt_timer_expire();
}
asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
}
+static __always_inline bool clear_bit_unlock_is_negative_byte(long nr, volatile unsigned long *addr)
+{
+ bool negative;
+ asm volatile(LOCK_PREFIX "andb %2,%1\n\t"
+ CC_SET(s)
+ : CC_OUT(s) (negative), ADDR
+ : "ir" ((char) ~(1 << nr)) : "memory");
+ return negative;
+}
+
+// Let everybody know we have it
+#define clear_bit_unlock_is_negative_byte clear_bit_unlock_is_negative_byte
+
/*
* __clear_bit_unlock - Clears a bit in memory
* @nr: Bit to clear
const char *name = get_name(bank, NULL);
int err = 0;
+ if (!dev)
+ return -ENODEV;
+
if (is_shared_bank(bank)) {
nb = node_to_amd_nb(amd_get_nb_id(cpu));
*/
int __init pci_swiotlb_detect_override(void)
{
- int use_swiotlb = swiotlb | swiotlb_force;
-
- if (swiotlb_force)
+ if (swiotlb_force == SWIOTLB_FORCE)
swiotlb = 1;
- return use_swiotlb;
+ return swiotlb;
}
IOMMU_INIT_FINISH(pci_swiotlb_detect_override,
pci_xen_swiotlb_detect,
#define VMX_MISC_EMULATED_PREEMPTION_TIMER_RATE 5
-#define VMX_VPID_EXTENT_SUPPORTED_MASK \
- (VMX_VPID_EXTENT_INDIVIDUAL_ADDR_BIT | \
- VMX_VPID_EXTENT_SINGLE_CONTEXT_BIT | \
- VMX_VPID_EXTENT_GLOBAL_CONTEXT_BIT | \
- VMX_VPID_EXTENT_SINGLE_NON_GLOBAL_BIT)
-
/*
* Hyper-V requires all of these, so mark them as supported even though
* they are just treated the same as all-context.
!nested_guest_cr4_valid(vcpu, vmcs12->guest_cr4)) {
nested_vmx_entry_failure(vcpu, vmcs12,
EXIT_REASON_INVALID_STATE, ENTRY_FAIL_DEFAULT);
- goto out;
+ return 1;
}
if (vmcs12->vmcs_link_pointer != -1ull) {
nested_vmx_entry_failure(vcpu, vmcs12,
EXIT_REASON_INVALID_STATE, ENTRY_FAIL_VMCS_LINK_PTR);
- goto out;
+ return 1;
}
/*
ia32e != !!(vmcs12->guest_ia32_efer & EFER_LME))) {
nested_vmx_entry_failure(vcpu, vmcs12,
EXIT_REASON_INVALID_STATE, ENTRY_FAIL_DEFAULT);
- goto out;
+ return 1;
}
}
ia32e != !!(vmcs12->host_ia32_efer & EFER_LME)) {
nested_vmx_entry_failure(vcpu, vmcs12,
EXIT_REASON_INVALID_STATE, ENTRY_FAIL_DEFAULT);
- goto out;
+ return 1;
}
}
memset(&events->reserved, 0, sizeof(events->reserved));
}
+static void kvm_set_hflags(struct kvm_vcpu *vcpu, unsigned emul_flags);
+
static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
struct kvm_vcpu_events *events)
{
vcpu->arch.apic->sipi_vector = events->sipi_vector;
if (events->flags & KVM_VCPUEVENT_VALID_SMM) {
+ u32 hflags = vcpu->arch.hflags;
if (events->smi.smm)
- vcpu->arch.hflags |= HF_SMM_MASK;
+ hflags |= HF_SMM_MASK;
else
- vcpu->arch.hflags &= ~HF_SMM_MASK;
+ hflags &= ~HF_SMM_MASK;
+ kvm_set_hflags(vcpu, hflags);
+
vcpu->arch.smi_pending = events->smi.pending;
if (events->smi.smm_inside_nmi)
vcpu->arch.hflags |= HF_SMM_INSIDE_NMI_MASK;
* activate this IOMMU. If running as PV privileged, activate it
* irregardless.
*/
- if ((xen_initial_domain() || swiotlb || swiotlb_force))
+ if (xen_initial_domain() || swiotlb || swiotlb_force == SWIOTLB_FORCE)
xen_swiotlb = 1;
/* If we are running under Xen, we MUST disable the native SWIOTLB.
size = PFN_PHYS(xen_start_info->nr_p2m_frames);
}
- if (!xen_is_e820_reserved(start, size)) {
- memblock_reserve(start, size);
+ memblock_reserve(start, size);
+ if (!xen_is_e820_reserved(start, size))
return;
- }
#ifdef CONFIG_X86_32
/*
BUG();
#else
xen_relocate_p2m();
+ memblock_free(start, size);
#endif
}
* the timer to kick off queuing again.
*/
static void __wbt_wait(struct rq_wb *rwb, unsigned long rw, spinlock_t *lock)
+ __releases(lock)
+ __acquires(lock)
{
struct rq_wait *rqw = get_rq_wait(rwb, current_is_kswapd());
DEFINE_WAIT(wait);
if (may_queue(rwb, rqw, &wait, rw))
break;
- if (lock)
+ if (lock) {
spin_unlock_irq(lock);
-
- io_schedule();
-
- if (lock)
+ io_schedule();
spin_lock_irq(lock);
+ } else
+ io_schedule();
} while (1);
finish_wait(&rqw->wait, &wait);
* in an irq held spinlock, if it holds one when calling this function.
* If we do sleep, we'll release and re-grab it.
*/
-unsigned int wbt_wait(struct rq_wb *rwb, struct bio *bio, spinlock_t *lock)
+enum wbt_flags wbt_wait(struct rq_wb *rwb, struct bio *bio, spinlock_t *lock)
{
unsigned int ret = 0;
for (i = 0; i < ctcount; i++) {
unsigned int dlen = COMP_BUF_SIZE;
int ilen = ctemplate[i].inlen;
+ void *input_vec;
+ input_vec = kmalloc(ilen, GFP_KERNEL);
+ if (!input_vec) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(input_vec, ctemplate[i].input, ilen);
memset(output, 0, dlen);
init_completion(&result.completion);
- sg_init_one(&src, ctemplate[i].input, ilen);
+ sg_init_one(&src, input_vec, ilen);
sg_init_one(&dst, output, dlen);
req = acomp_request_alloc(tfm);
if (!req) {
pr_err("alg: acomp: request alloc failed for %s\n",
algo);
+ kfree(input_vec);
ret = -ENOMEM;
goto out;
}
if (ret) {
pr_err("alg: acomp: compression failed on test %d for %s: ret=%d\n",
i + 1, algo, -ret);
+ kfree(input_vec);
acomp_request_free(req);
goto out;
}
pr_err("alg: acomp: Compression test %d failed for %s: output len = %d\n",
i + 1, algo, req->dlen);
ret = -EINVAL;
+ kfree(input_vec);
acomp_request_free(req);
goto out;
}
i + 1, algo);
hexdump(output, req->dlen);
ret = -EINVAL;
+ kfree(input_vec);
acomp_request_free(req);
goto out;
}
+ kfree(input_vec);
acomp_request_free(req);
}
for (i = 0; i < dtcount; i++) {
unsigned int dlen = COMP_BUF_SIZE;
int ilen = dtemplate[i].inlen;
+ void *input_vec;
+
+ input_vec = kmalloc(ilen, GFP_KERNEL);
+ if (!input_vec) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ memcpy(input_vec, dtemplate[i].input, ilen);
memset(output, 0, dlen);
init_completion(&result.completion);
- sg_init_one(&src, dtemplate[i].input, ilen);
+ sg_init_one(&src, input_vec, ilen);
sg_init_one(&dst, output, dlen);
req = acomp_request_alloc(tfm);
if (!req) {
pr_err("alg: acomp: request alloc failed for %s\n",
algo);
+ kfree(input_vec);
ret = -ENOMEM;
goto out;
}
if (ret) {
pr_err("alg: acomp: decompression failed on test %d for %s: ret=%d\n",
i + 1, algo, -ret);
+ kfree(input_vec);
acomp_request_free(req);
goto out;
}
pr_err("alg: acomp: Decompression test %d failed for %s: output len = %d\n",
i + 1, algo, req->dlen);
ret = -EINVAL;
+ kfree(input_vec);
acomp_request_free(req);
goto out;
}
i + 1, algo);
hexdump(output, req->dlen);
ret = -EINVAL;
+ kfree(input_vec);
acomp_request_free(req);
goto out;
}
+ kfree(input_vec);
acomp_request_free(req);
}
pdev = platform_device_register_simple("wdat_wdt", PLATFORM_DEVID_NONE,
resources, nresources);
if (IS_ERR(pdev))
- pr_err("Failed to create platform device\n");
+ pr_err("Device creation failed: %ld\n", PTR_ERR(pdev));
kfree(resources);
if (check_children && list_empty(&adev->children))
return -ENODEV;
- return sta_present ? FIND_CHILD_MAX_SCORE : FIND_CHILD_MIN_SCORE;
+ /*
+ * If the device has a _HID (or _CID) returning a valid ACPI/PNP
+ * device ID, it is better to make it look less attractive here, so that
+ * the other device with the same _ADR value (that may not have a valid
+ * device ID) can be matched going forward. [This means a second spec
+ * violation in a row, so whatever we do here is best effort anyway.]
+ */
+ return sta_present && list_empty(&adev->pnp.ids) ?
+ FIND_CHILD_MAX_SCORE : FIND_CHILD_MIN_SCORE;
}
struct acpi_device *acpi_find_child_device(struct acpi_device *parent,
return 0;
err:
- acpi_dma_deconfigure(dev);
ACPI_COMPANION_SET(dev, NULL);
put_device(dev);
put_device(&acpi_dev->dev);
static inline void acpi_amba_init(void) {}
#endif
int acpi_sysfs_init(void);
+void acpi_gpe_apply_masked_gpes(void);
void acpi_container_init(void);
void acpi_memory_hotplug_init(void);
#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
}
}
+ acpi_gpe_apply_masked_gpes();
acpi_update_all_gpes();
acpi_ec_ecdt_start();
return result ? result : size;
}
+/*
+ * A Quirk Mechanism for GPE Flooding Prevention:
+ *
+ * Quirks may be needed to prevent GPE flooding on a specific GPE. The
+ * flooding typically cannot be detected and automatically prevented by
+ * ACPI_GPE_DISPATCH_NONE check because there is a _Lxx/_Exx prepared in
+ * the AML tables. This normally indicates a feature gap in Linux, thus
+ * instead of providing endless quirk tables, we provide a boot parameter
+ * for those who want this quirk. For example, if the users want to prevent
+ * the GPE flooding for GPE 00, they need to specify the following boot
+ * parameter:
+ * acpi_mask_gpe=0x00
+ * The masking status can be modified by the following runtime controlling
+ * interface:
+ * echo unmask > /sys/firmware/acpi/interrupts/gpe00
+ */
+
+/*
+ * Currently, the GPE flooding prevention only supports to mask the GPEs
+ * numbered from 00 to 7f.
+ */
+#define ACPI_MASKABLE_GPE_MAX 0x80
+
+static u64 __initdata acpi_masked_gpes;
+
+static int __init acpi_gpe_set_masked_gpes(char *val)
+{
+ u8 gpe;
+
+ if (kstrtou8(val, 0, &gpe) || gpe > ACPI_MASKABLE_GPE_MAX)
+ return -EINVAL;
+ acpi_masked_gpes |= ((u64)1<<gpe);
+
+ return 1;
+}
+__setup("acpi_mask_gpe=", acpi_gpe_set_masked_gpes);
+
+void __init acpi_gpe_apply_masked_gpes(void)
+{
+ acpi_handle handle;
+ acpi_status status;
+ u8 gpe;
+
+ for (gpe = 0;
+ gpe < min_t(u8, ACPI_MASKABLE_GPE_MAX, acpi_current_gpe_count);
+ gpe++) {
+ if (acpi_masked_gpes & ((u64)1<<gpe)) {
+ status = acpi_get_gpe_device(gpe, &handle);
+ if (ACPI_SUCCESS(status)) {
+ pr_info("Masking GPE 0x%x.\n", gpe);
+ (void)acpi_mask_gpe(handle, gpe, TRUE);
+ }
+ }
+ }
+}
+
void acpi_irq_stats_init(void)
{
acpi_status status;
out:
/* Measure resume latency. */
+ time_start = 0;
if (timed && runtime_pm)
time_start = ktime_get();
kfree(clks);
iounmap(base);
}
-CLK_OF_DECLARE(stm32f42xx_rcc, "st,stm32f42xx-rcc", stm32f4_rcc_init);
-CLK_OF_DECLARE(stm32f46xx_rcc, "st,stm32f469-rcc", stm32f4_rcc_init);
+CLK_OF_DECLARE_DRIVER(stm32f42xx_rcc, "st,stm32f42xx-rcc", stm32f4_rcc_init);
+CLK_OF_DECLARE_DRIVER(stm32f46xx_rcc, "st,stm32f469-rcc", stm32f4_rcc_init);
* @smstpcr: module stop control register
* @mstpsr: module stop status register (optional)
* @lock: protects writes to SMSTPCR
+ * @width_8bit: registers are 8-bit, not 32-bit
*/
struct mstp_clock_group {
struct clk_onecell_data data;
void __iomem *smstpcr;
void __iomem *mstpsr;
spinlock_t lock;
+ bool width_8bit;
};
/**
#define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw)
+static inline u32 cpg_mstp_read(struct mstp_clock_group *group,
+ u32 __iomem *reg)
+{
+ return group->width_8bit ? readb(reg) : clk_readl(reg);
+}
+
+static inline void cpg_mstp_write(struct mstp_clock_group *group, u32 val,
+ u32 __iomem *reg)
+{
+ group->width_8bit ? writeb(val, reg) : clk_writel(val, reg);
+}
+
static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
{
struct mstp_clock *clock = to_mstp_clock(hw);
spin_lock_irqsave(&group->lock, flags);
- value = clk_readl(group->smstpcr);
+ value = cpg_mstp_read(group, group->smstpcr);
if (enable)
value &= ~bitmask;
else
value |= bitmask;
- clk_writel(value, group->smstpcr);
+ cpg_mstp_write(group, value, group->smstpcr);
spin_unlock_irqrestore(&group->lock, flags);
return 0;
for (i = 1000; i > 0; --i) {
- if (!(clk_readl(group->mstpsr) & bitmask))
+ if (!(cpg_mstp_read(group, group->mstpsr) & bitmask))
break;
cpu_relax();
}
u32 value;
if (group->mstpsr)
- value = clk_readl(group->mstpsr);
+ value = cpg_mstp_read(group, group->mstpsr);
else
- value = clk_readl(group->smstpcr);
+ value = cpg_mstp_read(group, group->smstpcr);
return !(value & BIT(clock->bit_index));
}
return;
}
+ if (of_device_is_compatible(np, "renesas,r7s72100-mstp-clocks"))
+ group->width_8bit = true;
+
for (i = 0; i < MSTP_MAX_CLOCKS; ++i)
clks[i] = ERR_PTR(-ENOENT);
{ .compatible = "allwinner,sun8i-a83t", },
{ .compatible = "allwinner,sun8i-h3", },
+ { .compatible = "apm,xgene-shadowcat", },
+
{ .compatible = "arm,integrator-ap", },
{ .compatible = "arm,integrator-cp", },
NULL,
};
-static void intel_pstate_hwp_set(const struct cpumask *cpumask)
+static void intel_pstate_hwp_set(struct cpufreq_policy *policy)
{
int min, hw_min, max, hw_max, cpu, range, adj_range;
struct perf_limits *perf_limits = limits;
u64 value, cap;
- for_each_cpu(cpu, cpumask) {
+ for_each_cpu(cpu, policy->cpus) {
int max_perf_pct, min_perf_pct;
struct cpudata *cpu_data = all_cpu_data[cpu];
s16 epp;
static int intel_pstate_hwp_set_policy(struct cpufreq_policy *policy)
{
if (hwp_active)
- intel_pstate_hwp_set(policy->cpus);
+ intel_pstate_hwp_set(policy);
return 0;
}
static int intel_pstate_resume(struct cpufreq_policy *policy)
{
+ int ret;
+
if (!hwp_active)
return 0;
+ mutex_lock(&intel_pstate_limits_lock);
+
all_cpu_data[policy->cpu]->epp_policy = 0;
- return intel_pstate_hwp_set_policy(policy);
+ ret = intel_pstate_hwp_set_policy(policy);
+
+ mutex_unlock(&intel_pstate_limits_lock);
+
+ return ret;
}
-static void intel_pstate_hwp_set_online_cpus(void)
+static void intel_pstate_update_policies(void)
{
- get_online_cpus();
- intel_pstate_hwp_set(cpu_online_mask);
- put_online_cpus();
+ int cpu;
+
+ for_each_possible_cpu(cpu)
+ cpufreq_update_policy(cpu);
}
/************************** debugfs begin ************************/
struct dentry *debugfs_parent;
int i = 0;
- if (hwp_active ||
- pstate_funcs.get_target_pstate == get_target_pstate_use_cpu_load)
- return;
-
debugfs_parent = debugfs_create_dir("pstate_snb", NULL);
if (IS_ERR_OR_NULL(debugfs_parent))
return;
limits->no_turbo = clamp_t(int, input, 0, 1);
- if (hwp_active)
- intel_pstate_hwp_set_online_cpus();
-
mutex_unlock(&intel_pstate_limits_lock);
+ intel_pstate_update_policies();
+
return count;
}
limits->max_perf_pct);
limits->max_perf = div_ext_fp(limits->max_perf_pct, 100);
- if (hwp_active)
- intel_pstate_hwp_set_online_cpus();
-
mutex_unlock(&intel_pstate_limits_lock);
+ intel_pstate_update_policies();
+
return count;
}
limits->min_perf_pct);
limits->min_perf = div_ext_fp(limits->min_perf_pct, 100);
- if (hwp_active)
- intel_pstate_hwp_set_online_cpus();
-
mutex_unlock(&intel_pstate_limits_lock);
+ intel_pstate_update_policies();
+
return count;
}
if (per_cpu_limits)
perf_limits = cpu->perf_limits;
+ mutex_lock(&intel_pstate_limits_lock);
+
intel_pstate_update_perf_limits(policy, perf_limits);
+ mutex_unlock(&intel_pstate_limits_lock);
+
return 0;
}
if (rc)
goto out;
- intel_pstate_debug_expose_params();
+ if (intel_pstate_driver == &intel_pstate && !hwp_active &&
+ pstate_funcs.get_target_pstate != get_target_pstate_use_cpu_load)
+ intel_pstate_debug_expose_params();
+
intel_pstate_sysfs_expose_params();
if (hwp_active)
#define CESA_TDMA_SRC_IN_SRAM BIT(30)
#define CESA_TDMA_END_OF_REQ BIT(29)
#define CESA_TDMA_BREAK_CHAIN BIT(28)
-#define CESA_TDMA_TYPE_MSK GENMASK(27, 0)
+#define CESA_TDMA_SET_STATE BIT(27)
+#define CESA_TDMA_TYPE_MSK GENMASK(26, 0)
#define CESA_TDMA_DUMMY 0
#define CESA_TDMA_DATA 1
#define CESA_TDMA_OP 2
sreq->offset = 0;
}
+static void mv_cesa_ahash_dma_step(struct ahash_request *req)
+{
+ struct mv_cesa_ahash_req *creq = ahash_request_ctx(req);
+ struct mv_cesa_req *base = &creq->base;
+
+ /* We must explicitly set the digest state. */
+ if (base->chain.first->flags & CESA_TDMA_SET_STATE) {
+ struct mv_cesa_engine *engine = base->engine;
+ int i;
+
+ /* Set the hash state in the IVDIG regs. */
+ for (i = 0; i < ARRAY_SIZE(creq->state); i++)
+ writel_relaxed(creq->state[i], engine->regs +
+ CESA_IVDIG(i));
+ }
+
+ mv_cesa_dma_step(base);
+}
+
static void mv_cesa_ahash_step(struct crypto_async_request *req)
{
struct ahash_request *ahashreq = ahash_request_cast(req);
struct mv_cesa_ahash_req *creq = ahash_request_ctx(ahashreq);
if (mv_cesa_req_get_type(&creq->base) == CESA_DMA_REQ)
- mv_cesa_dma_step(&creq->base);
+ mv_cesa_ahash_dma_step(ahashreq);
else
mv_cesa_ahash_std_step(ahashreq);
}
struct mv_cesa_ahash_dma_iter iter;
struct mv_cesa_op_ctx *op = NULL;
unsigned int frag_len;
+ bool set_state = false;
int ret;
u32 type;
basereq->chain.first = NULL;
basereq->chain.last = NULL;
+ if (!mv_cesa_mac_op_is_first_frag(&creq->op_tmpl))
+ set_state = true;
+
if (creq->src_nents) {
ret = dma_map_sg(cesa_dev->dev, req->src, creq->src_nents,
DMA_TO_DEVICE);
if (type != CESA_TDMA_RESULT)
basereq->chain.last->flags |= CESA_TDMA_BREAK_CHAIN;
+ if (set_state) {
+ /*
+ * Put the CESA_TDMA_SET_STATE flag on the first tdma desc to
+ * let the step logic know that the IVDIG registers should be
+ * explicitly set before launching a TDMA chain.
+ */
+ basereq->chain.first->flags |= CESA_TDMA_SET_STATE;
+ }
+
return 0;
err_free_tdma:
last->next = dreq->chain.first;
engine->chain.last = dreq->chain.last;
- if (!(last->flags & CESA_TDMA_BREAK_CHAIN))
+ /*
+ * Break the DMA chain if the CESA_TDMA_BREAK_CHAIN is set on
+ * the last element of the current chain, or if the request
+ * being queued needs the IV regs to be set before lauching
+ * the request.
+ */
+ if (!(last->flags & CESA_TDMA_BREAK_CHAIN) &&
+ !(dreq->chain.first->flags & CESA_TDMA_SET_STATE))
last->next_dma = dreq->chain.first->cur_dma;
}
}
list_add(&devfreq->node, &devfreq_list);
governor = find_devfreq_governor(devfreq->governor_name);
- if (!IS_ERR(governor))
- devfreq->governor = governor;
- if (devfreq->governor)
- err = devfreq->governor->event_handler(devfreq,
- DEVFREQ_GOV_START, NULL);
+ if (IS_ERR(governor)) {
+ dev_err(dev, "%s: Unable to find governor for the device\n",
+ __func__);
+ err = PTR_ERR(governor);
+ goto err_init;
+ }
+
+ devfreq->governor = governor;
+ err = devfreq->governor->event_handler(devfreq, DEVFREQ_GOV_START,
+ NULL);
if (err) {
dev_err(dev, "%s: Unable to start governor for the device\n",
__func__);
if (IS_ERR(bus->devfreq)) {
dev_err(dev,
"failed to add devfreq dev with passive governor\n");
- ret = -EPROBE_DEFER;
+ ret = PTR_ERR(bus->devfreq);
goto err;
}
ret = scpi_send_message(CMD_SENSOR_VALUE, &id, sizeof(id),
&buf, sizeof(buf));
- if (!ret)
+ if (ret)
+ return ret;
+
+ if (scpi_info->is_legacy)
+ /* only 32-bits supported, hi_val can be junk */
+ *val = le32_to_cpu(buf.lo_val);
+ else
*val = (u64)le32_to_cpu(buf.hi_val) << 32 |
le32_to_cpu(buf.lo_val);
- return ret;
+ return 0;
}
static int scpi_device_get_power_state(u16 dev_id)
struct cpuidle_device *dev;
struct cpuidle_driver *drv;
/* No need for an actual callback, we just want to wake up the CPU. */
- struct timer_list wakeup_timer =
- TIMER_INITIALIZER(dummy_callback, 0, 0);
+ struct timer_list wakeup_timer;
/* Wait for the main thread to give the start signal. */
wait_for_completion(&suspend_threads_started);
pr_info("CPU %d entering suspend cycles, states 1 through %d\n",
cpu, drv->state_count - 1);
+ setup_timer_on_stack(&wakeup_timer, dummy_callback, 0);
for (i = 0; i < NUM_SUSPEND_CYCLE; ++i) {
int index;
/*
u8 changed = old ^ new;
int ret;
+ memcpy(vgpu_cfg_space(vgpu) + offset, p_data, bytes);
if (!(changed & PCI_COMMAND_MEMORY))
return 0;
return ret;
}
- memcpy(vgpu_cfg_space(vgpu) + offset, p_data, bytes);
return 0;
}
if (WARN_ON(bytes > 4))
return -EINVAL;
- if (WARN_ON(offset + bytes >= INTEL_GVT_MAX_CFG_SPACE_SZ))
+ if (WARN_ON(offset + bytes > INTEL_GVT_MAX_CFG_SPACE_SZ))
return -EINVAL;
/* First check if it's PCI_COMMAND */
INIT_LIST_HEAD(>t->oos_page_list_head);
INIT_LIST_HEAD(>t->post_shadow_list_head);
+ intel_vgpu_reset_ggtt(vgpu);
+
ggtt_mm = intel_vgpu_create_mm(vgpu, INTEL_GVT_MM_GGTT,
NULL, 1, 0);
if (IS_ERR(ggtt_mm)) {
int intel_gvt_init_gtt(struct intel_gvt *gvt)
{
int ret;
+ void *page_addr;
gvt_dbg_core("init gtt\n");
return -ENODEV;
}
+ gvt->gtt.scratch_ggtt_page =
+ alloc_page(GFP_KERNEL | GFP_ATOMIC | __GFP_ZERO);
+ if (!gvt->gtt.scratch_ggtt_page) {
+ gvt_err("fail to allocate scratch ggtt page\n");
+ return -ENOMEM;
+ }
+
+ page_addr = page_address(gvt->gtt.scratch_ggtt_page);
+
+ gvt->gtt.scratch_ggtt_mfn =
+ intel_gvt_hypervisor_virt_to_mfn(page_addr);
+ if (gvt->gtt.scratch_ggtt_mfn == INTEL_GVT_INVALID_ADDR) {
+ gvt_err("fail to translate scratch ggtt page\n");
+ __free_page(gvt->gtt.scratch_ggtt_page);
+ return -EFAULT;
+ }
+
if (enable_out_of_sync) {
ret = setup_spt_oos(gvt);
if (ret) {
*/
void intel_gvt_clean_gtt(struct intel_gvt *gvt)
{
+ __free_page(gvt->gtt.scratch_ggtt_page);
+
if (enable_out_of_sync)
clean_spt_oos(gvt);
}
+
+/**
+ * intel_vgpu_reset_ggtt - reset the GGTT entry
+ * @vgpu: a vGPU
+ *
+ * This function is called at the vGPU create stage
+ * to reset all the GGTT entries.
+ *
+ */
+void intel_vgpu_reset_ggtt(struct intel_vgpu *vgpu)
+{
+ struct intel_gvt *gvt = vgpu->gvt;
+ struct intel_gvt_gtt_pte_ops *ops = vgpu->gvt->gtt.pte_ops;
+ u32 index;
+ u32 offset;
+ u32 num_entries;
+ struct intel_gvt_gtt_entry e;
+
+ memset(&e, 0, sizeof(struct intel_gvt_gtt_entry));
+ e.type = GTT_TYPE_GGTT_PTE;
+ ops->set_pfn(&e, gvt->gtt.scratch_ggtt_mfn);
+ e.val64 |= _PAGE_PRESENT;
+
+ index = vgpu_aperture_gmadr_base(vgpu) >> PAGE_SHIFT;
+ num_entries = vgpu_aperture_sz(vgpu) >> PAGE_SHIFT;
+ for (offset = 0; offset < num_entries; offset++)
+ ops->set_entry(NULL, &e, index + offset, false, 0, vgpu);
+
+ index = vgpu_hidden_gmadr_base(vgpu) >> PAGE_SHIFT;
+ num_entries = vgpu_hidden_sz(vgpu) >> PAGE_SHIFT;
+ for (offset = 0; offset < num_entries; offset++)
+ ops->set_entry(NULL, &e, index + offset, false, 0, vgpu);
+}
struct list_head oos_page_use_list_head;
struct list_head oos_page_free_list_head;
struct list_head mm_lru_list_head;
+
+ struct page *scratch_ggtt_page;
+ unsigned long scratch_ggtt_mfn;
};
enum {
extern int intel_vgpu_init_gtt(struct intel_vgpu *vgpu);
extern void intel_vgpu_clean_gtt(struct intel_vgpu *vgpu);
+void intel_vgpu_reset_ggtt(struct intel_vgpu *vgpu);
extern int intel_gvt_init_gtt(struct intel_gvt *gvt);
extern void intel_gvt_clean_gtt(struct intel_gvt *gvt);
struct notifier_block group_notifier;
struct kvm *kvm;
struct work_struct release_work;
+ atomic_t released;
} vdev;
#endif
};
static kvm_pfn_t gvt_cache_find(struct intel_vgpu *vgpu, gfn_t gfn)
{
struct gvt_dma *entry;
+ kvm_pfn_t pfn;
mutex_lock(&vgpu->vdev.cache_lock);
+
entry = __gvt_cache_find(vgpu, gfn);
- mutex_unlock(&vgpu->vdev.cache_lock);
+ pfn = (entry == NULL) ? 0 : entry->pfn;
- return entry == NULL ? 0 : entry->pfn;
+ mutex_unlock(&vgpu->vdev.cache_lock);
+ return pfn;
}
static void gvt_cache_add(struct intel_vgpu *vgpu, gfn_t gfn, kvm_pfn_t pfn)
static void gvt_cache_remove(struct intel_vgpu *vgpu, gfn_t gfn)
{
- struct device *dev = &vgpu->vdev.mdev->dev;
+ struct device *dev = mdev_dev(vgpu->vdev.mdev);
struct gvt_dma *this;
unsigned long g1;
int rc;
{
struct gvt_dma *dma;
struct rb_node *node = NULL;
- struct device *dev = &vgpu->vdev.mdev->dev;
+ struct device *dev = mdev_dev(vgpu->vdev.mdev);
unsigned long gfn;
mutex_lock(&vgpu->vdev.cache_lock);
struct device *pdev;
void *gvt;
- pdev = mdev->parent->dev;
+ pdev = mdev_parent_dev(mdev);
gvt = kdev_to_i915(pdev)->gvt;
type = intel_gvt_find_vgpu_type(gvt, kobject_name(kobj));
mdev_set_drvdata(mdev, vgpu);
gvt_dbg_core("intel_vgpu_create succeeded for mdev: %s\n",
- dev_name(&mdev->dev));
+ dev_name(mdev_dev(mdev)));
return 0;
}
vgpu->vdev.group_notifier.notifier_call = intel_vgpu_group_notifier;
events = VFIO_IOMMU_NOTIFY_DMA_UNMAP;
- ret = vfio_register_notifier(&mdev->dev, VFIO_IOMMU_NOTIFY, &events,
+ ret = vfio_register_notifier(mdev_dev(mdev), VFIO_IOMMU_NOTIFY, &events,
&vgpu->vdev.iommu_notifier);
if (ret != 0) {
gvt_err("vfio_register_notifier for iommu failed: %d\n", ret);
}
events = VFIO_GROUP_NOTIFY_SET_KVM;
- ret = vfio_register_notifier(&mdev->dev, VFIO_GROUP_NOTIFY, &events,
+ ret = vfio_register_notifier(mdev_dev(mdev), VFIO_GROUP_NOTIFY, &events,
&vgpu->vdev.group_notifier);
if (ret != 0) {
gvt_err("vfio_register_notifier for group failed: %d\n", ret);
goto undo_iommu;
}
- return kvmgt_guest_init(mdev);
+ ret = kvmgt_guest_init(mdev);
+ if (ret)
+ goto undo_group;
+
+ atomic_set(&vgpu->vdev.released, 0);
+ return ret;
+
+undo_group:
+ vfio_unregister_notifier(mdev_dev(mdev), VFIO_GROUP_NOTIFY,
+ &vgpu->vdev.group_notifier);
undo_iommu:
- vfio_unregister_notifier(&mdev->dev, VFIO_IOMMU_NOTIFY,
+ vfio_unregister_notifier(mdev_dev(mdev), VFIO_IOMMU_NOTIFY,
&vgpu->vdev.iommu_notifier);
out:
return ret;
static void __intel_vgpu_release(struct intel_vgpu *vgpu)
{
struct kvmgt_guest_info *info;
+ int ret;
if (!handle_valid(vgpu->handle))
return;
- vfio_unregister_notifier(&vgpu->vdev.mdev->dev, VFIO_IOMMU_NOTIFY,
+ if (atomic_cmpxchg(&vgpu->vdev.released, 0, 1))
+ return;
+
+ ret = vfio_unregister_notifier(mdev_dev(vgpu->vdev.mdev), VFIO_IOMMU_NOTIFY,
&vgpu->vdev.iommu_notifier);
- vfio_unregister_notifier(&vgpu->vdev.mdev->dev, VFIO_GROUP_NOTIFY,
+ WARN(ret, "vfio_unregister_notifier for iommu failed: %d\n", ret);
+
+ ret = vfio_unregister_notifier(mdev_dev(vgpu->vdev.mdev), VFIO_GROUP_NOTIFY,
&vgpu->vdev.group_notifier);
+ WARN(ret, "vfio_unregister_notifier for group failed: %d\n", ret);
info = (struct kvmgt_guest_info *)vgpu->handle;
kvmgt_guest_exit(info);
+
+ vgpu->vdev.kvm = NULL;
vgpu->handle = 0;
}
{
struct intel_vgpu *vgpu = container_of(work, struct intel_vgpu,
vdev.release_work);
+
__intel_vgpu_release(vgpu);
}
return 0;
}
-static const struct parent_ops intel_vgpu_ops = {
+static const struct mdev_parent_ops intel_vgpu_ops = {
.supported_type_groups = intel_vgpu_type_groups,
.create = intel_vgpu_create,
.remove = intel_vgpu_remove,
idx = srcu_read_lock(&kvm->srcu);
slot = gfn_to_memslot(kvm, gfn);
+ if (!slot) {
+ srcu_read_unlock(&kvm->srcu, idx);
+ return -EINVAL;
+ }
spin_lock(&kvm->mmu_lock);
idx = srcu_read_lock(&kvm->srcu);
slot = gfn_to_memslot(kvm, gfn);
+ if (!slot) {
+ srcu_read_unlock(&kvm->srcu, idx);
+ return -EINVAL;
+ }
spin_lock(&kvm->mmu_lock);
static bool kvmgt_guest_exit(struct kvmgt_guest_info *info)
{
- struct intel_vgpu *vgpu;
-
if (!info) {
gvt_err("kvmgt_guest_info invalid\n");
return false;
}
- vgpu = info->vgpu;
-
kvm_page_track_unregister_notifier(info->kvm, &info->track_node);
kvmgt_protect_table_destroy(info);
- gvt_cache_destroy(vgpu);
+ gvt_cache_destroy(info->vgpu);
vfree(info);
return true;
return pfn;
pfn = INTEL_GVT_INVALID_ADDR;
- dev = &info->vgpu->vdev.mdev->dev;
+ dev = mdev_dev(info->vgpu->vdev.mdev);
rc = vfio_pin_pages(dev, &gfn, 1, IOMMU_READ | IOMMU_WRITE, &pfn);
if (rc != 1) {
gvt_err("vfio_pin_pages failed for gfn 0x%lx: %d\n", gfn, rc);
int i, ret;
for (i = 0; i < INTEL_GVT_OPREGION_PAGES; i++) {
- mfn = intel_gvt_hypervisor_virt_to_mfn(vgpu_opregion(vgpu)
+ mfn = intel_gvt_hypervisor_virt_to_mfn(vgpu_opregion(vgpu)->va
+ i * PAGE_SIZE);
if (mfn == INTEL_GVT_INVALID_ADDR) {
gvt_err("fail to get MFN from VA\n");
static void
__i915_gem_object_release_shmem(struct drm_i915_gem_object *obj,
- struct sg_table *pages)
+ struct sg_table *pages,
+ bool needs_clflush)
{
GEM_BUG_ON(obj->mm.madv == __I915_MADV_PURGED);
if (obj->mm.madv == I915_MADV_DONTNEED)
obj->mm.dirty = false;
- if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0 &&
+ if (needs_clflush &&
+ (obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0 &&
!cpu_cache_is_coherent(obj->base.dev, obj->cache_level))
drm_clflush_sg(pages);
i915_gem_object_put_pages_phys(struct drm_i915_gem_object *obj,
struct sg_table *pages)
{
- __i915_gem_object_release_shmem(obj, pages);
+ __i915_gem_object_release_shmem(obj, pages, false);
if (obj->mm.dirty) {
struct address_space *mapping = obj->base.filp->f_mapping;
struct sgt_iter sgt_iter;
struct page *page;
- __i915_gem_object_release_shmem(obj, pages);
+ __i915_gem_object_release_shmem(obj, pages, true);
i915_gem_gtt_finish_pages(obj, pages);
mutex_unlock(&obj->mm.lock);
}
-static unsigned int swiotlb_max_size(void)
-{
-#if IS_ENABLED(CONFIG_SWIOTLB)
- return rounddown(swiotlb_nr_tbl() << IO_TLB_SHIFT, PAGE_SIZE);
-#else
- return 0;
-#endif
-}
-
static void i915_sg_trim(struct sg_table *orig_st)
{
struct sg_table new_st;
if (orig_st->nents == orig_st->orig_nents)
return;
- if (sg_alloc_table(&new_st, orig_st->nents, GFP_KERNEL))
+ if (sg_alloc_table(&new_st, orig_st->nents, GFP_KERNEL | __GFP_NOWARN))
return;
new_sg = new_st.sgl;
GEM_BUG_ON(obj->base.read_domains & I915_GEM_GPU_DOMAINS);
GEM_BUG_ON(obj->base.write_domain & I915_GEM_GPU_DOMAINS);
- max_segment = swiotlb_max_size();
+ max_segment = swiotlb_max_segment();
if (!max_segment)
max_segment = rounddown(UINT_MAX, PAGE_SIZE);
struct drm_i915_gem_request *request;
struct i915_gem_context *incomplete_ctx;
struct intel_timeline *timeline;
+ unsigned long flags;
bool ring_hung;
if (engine->irq_seqno_barrier)
if (i915_gem_context_is_default(incomplete_ctx))
return;
+ timeline = i915_gem_context_lookup_timeline(incomplete_ctx, engine);
+
+ spin_lock_irqsave(&engine->timeline->lock, flags);
+ spin_lock(&timeline->lock);
+
list_for_each_entry_continue(request, &engine->timeline->requests, link)
if (request->ctx == incomplete_ctx)
reset_request(request);
- timeline = i915_gem_context_lookup_timeline(incomplete_ctx, engine);
list_for_each_entry(request, &timeline->requests, link)
reset_request(request);
+
+ spin_unlock(&timeline->lock);
+ spin_unlock_irqrestore(&engine->timeline->lock, flags);
}
void i915_gem_reset(struct drm_i915_private *dev_priv)
rcu_assign_pointer(active->request, request);
}
+/**
+ * i915_gem_active_set_retire_fn - updates the retirement callback
+ * @active - the active tracker
+ * @fn - the routine called when the request is retired
+ * @mutex - struct_mutex used to guard retirements
+ *
+ * i915_gem_active_set_retire_fn() updates the function pointer that
+ * is called when the final request associated with the @active tracker
+ * is retired.
+ */
+static inline void
+i915_gem_active_set_retire_fn(struct i915_gem_active *active,
+ i915_gem_retire_fn fn,
+ struct mutex *mutex)
+{
+ lockdep_assert_held(mutex);
+ active->retire = fn ?: i915_gem_retire_noop;
+}
+
static inline struct drm_i915_gem_request *
__i915_gem_active_peek(const struct i915_gem_active *active)
{
for_each_intel_crtc(dev, crtc) {
struct intel_crtc_state *crtc_state = crtc->config;
- int pixclk = 0;
__drm_atomic_helper_crtc_destroy_state(&crtc_state->base);
memset(crtc_state, 0, sizeof(*crtc_state));
crtc->base.enabled = crtc_state->base.enable;
crtc->active = crtc_state->base.active;
- if (crtc_state->base.active) {
+ if (crtc_state->base.active)
dev_priv->active_crtcs |= 1 << crtc->pipe;
- if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
- pixclk = ilk_pipe_pixel_rate(crtc_state);
- else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
- pixclk = crtc_state->base.adjusted_mode.crtc_clock;
- else
- WARN_ON(dev_priv->display.modeset_calc_cdclk);
-
- /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
- if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled)
- pixclk = DIV_ROUND_UP(pixclk * 100, 95);
- }
-
- dev_priv->min_pixclk[crtc->pipe] = pixclk;
-
readout_plane_state(crtc);
DRM_DEBUG_KMS("[CRTC:%d:%s] hw state readout: %s\n",
}
for_each_intel_crtc(dev, crtc) {
+ int pixclk = 0;
+
crtc->base.hwmode = crtc->config->base.adjusted_mode;
memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
*/
crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
+ if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
+ pixclk = ilk_pipe_pixel_rate(crtc->config);
+ else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+ pixclk = crtc->config->base.adjusted_mode.crtc_clock;
+ else
+ WARN_ON(dev_priv->display.modeset_calc_cdclk);
+
+ /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+ if (IS_BROADWELL(dev_priv) && crtc->config->ips_enabled)
+ pixclk = DIV_ROUND_UP(pixclk * 100, 95);
+
drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
update_scanline_offset(crtc);
}
+ dev_priv->min_pixclk[crtc->pipe] = pixclk;
+
intel_pipe_config_sanity_check(dev_priv, crtc->config);
}
}
struct intel_dp *intel_dp);
static void
intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
- struct intel_dp *intel_dp);
+ struct intel_dp *intel_dp,
+ bool force_disable_vdd);
static void
intel_dp_pps_init(struct drm_device *dev, struct intel_dp *intel_dp);
/* init power sequencer on this pipe and port */
intel_dp_init_panel_power_sequencer(dev, intel_dp);
- intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
+ intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, true);
/*
* Even vdd force doesn't work until we've made
* Only the HW needs to be reprogrammed, the SW state is fixed and
* has been setup during connector init.
*/
- intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
+ intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, false);
return 0;
}
port_name(port), pipe_name(intel_dp->pps_pipe));
intel_dp_init_panel_power_sequencer(dev, intel_dp);
- intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
+ intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, false);
}
void intel_power_sequencer_reset(struct drm_i915_private *dev_priv)
/* init power sequencer on this pipe and port */
intel_dp_init_panel_power_sequencer(dev, intel_dp);
- intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
+ intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, true);
}
static void vlv_pre_enable_dp(struct intel_encoder *encoder,
static void
intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
- struct intel_dp *intel_dp)
+ struct intel_dp *intel_dp,
+ bool force_disable_vdd)
{
struct drm_i915_private *dev_priv = to_i915(dev);
u32 pp_on, pp_off, pp_div, port_sel = 0;
intel_pps_get_registers(dev_priv, intel_dp, ®s);
+ /*
+ * On some VLV machines the BIOS can leave the VDD
+ * enabled even on power seqeuencers which aren't
+ * hooked up to any port. This would mess up the
+ * power domain tracking the first time we pick
+ * one of these power sequencers for use since
+ * edp_panel_vdd_on() would notice that the VDD was
+ * already on and therefore wouldn't grab the power
+ * domain reference. Disable VDD first to avoid this.
+ * This also avoids spuriously turning the VDD on as
+ * soon as the new power seqeuencer gets initialized.
+ */
+ if (force_disable_vdd) {
+ u32 pp = ironlake_get_pp_control(intel_dp);
+
+ WARN(pp & PANEL_POWER_ON, "Panel power already on\n");
+
+ if (pp & EDP_FORCE_VDD)
+ DRM_DEBUG_KMS("VDD already on, disabling first\n");
+
+ pp &= ~EDP_FORCE_VDD;
+
+ I915_WRITE(regs.pp_ctrl, pp);
+ }
+
pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
(seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT);
pp_off = (seq->t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) |
vlv_initial_power_sequencer_setup(intel_dp);
} else {
intel_dp_init_panel_power_sequencer(dev, intel_dp);
- intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
+ intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, false);
}
}
{
GEM_BUG_ON(i915_gem_active_peek(&overlay->last_flip,
&overlay->i915->drm.struct_mutex));
- overlay->last_flip.retire = retire;
+ i915_gem_active_set_retire_fn(&overlay->last_flip, retire,
+ &overlay->i915->drm.struct_mutex);
i915_gem_active_set(&overlay->last_flip, req);
i915_add_request(req);
}
if (ret)
goto out_unpin;
- i915_gem_track_fb(overlay->vma->obj, new_bo,
- INTEL_FRONTBUFFER_OVERLAY(pipe));
+ i915_gem_track_fb(overlay->vma ? overlay->vma->obj : NULL,
+ vma->obj, INTEL_FRONTBUFFER_OVERLAY(pipe));
overlay->old_vma = overlay->vma;
overlay->vma = vma;
overlay->contrast = 75;
overlay->saturation = 146;
+ init_request_active(&overlay->last_flip, NULL);
+
regs = intel_overlay_map_regs(overlay);
if (!regs)
goto out_unpin_bo;
#define QUIRK_SKIP_INPUT_MAPPING BIT(2)
#define QUIRK_IS_MULTITOUCH BIT(3)
-#define NOTEBOOK_QUIRKS QUIRK_FIX_NOTEBOOK_REPORT
+#define KEYBOARD_QUIRKS (QUIRK_FIX_NOTEBOOK_REPORT | \
+ QUIRK_NO_INIT_REPORTS)
#define TOUCHPAD_QUIRKS (QUIRK_NO_INIT_REPORTS | \
QUIRK_SKIP_INPUT_MAPPING | \
QUIRK_IS_MULTITOUCH)
static int asus_input_configured(struct hid_device *hdev, struct hid_input *hi)
{
+ struct input_dev *input = hi->input;
struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
if (drvdata->quirks & QUIRK_IS_MULTITOUCH) {
int ret;
- struct input_dev *input = hi->input;
input_set_abs_params(input, ABS_MT_POSITION_X, 0, MAX_X, 0, 0);
input_set_abs_params(input, ABS_MT_POSITION_Y, 0, MAX_Y, 0, 0);
hid_err(hdev, "Asus input mt init slots failed: %d\n", ret);
return ret;
}
-
- drvdata->input = input;
}
+ drvdata->input = input;
+
return 0;
}
goto err_stop_hw;
}
- drvdata->input->name = "Asus TouchPad";
+ if (drvdata->quirks & QUIRK_IS_MULTITOUCH) {
+ drvdata->input->name = "Asus TouchPad";
+ } else {
+ drvdata->input->name = "Asus Keyboard";
+ }
if (drvdata->quirks & QUIRK_IS_MULTITOUCH) {
ret = asus_start_multitouch(hdev);
static const struct hid_device_id asus_devices[] = {
{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
- USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD), NOTEBOOK_QUIRKS},
+ USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD), KEYBOARD_QUIRKS},
{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
USB_DEVICE_ID_ASUSTEK_TOUCHPAD), TOUCHPAD_QUIRKS },
{ }
#define USB_VENDOR_ID_DRAGONRISE 0x0079
#define USB_DEVICE_ID_DRAGONRISE_WIIU 0x1800
#define USB_DEVICE_ID_DRAGONRISE_PS3 0x1801
+#define USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR 0x1803
#define USB_DEVICE_ID_DRAGONRISE_GAMECUBE 0x1843
#define USB_VENDOR_ID_DWAV 0x0eef
#define USB_VENDOR_ID_FLATFROG 0x25b5
#define USB_DEVICE_ID_MULTITOUCH_3200 0x0002
+#define USB_VENDOR_ID_FUTABA 0x0547
+#define USB_DEVICE_ID_LED_DISPLAY 0x7000
+
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
__s32 value;
int ret = 0;
- memset(buffer, 0, buffer_size);
mutex_lock(&data->mutex);
report = sensor_hub_report(report_id, hsdev->hdev, HID_FEATURE_REPORT);
if (!report || (field_index >= report->maxfield)) {
int buffer_index = 0;
int i;
+ memset(buffer, 0, buffer_size);
+
mutex_lock(&data->mutex);
report = sensor_hub_report(report_id, hsdev->hdev, HID_FEATURE_REPORT);
if (!report || (field_index >= report->maxfield) ||
u8 led_delay_on[MAX_LEDS];
u8 led_delay_off[MAX_LEDS];
u8 led_count;
+ bool ds4_dongle_connected;
};
+static void sony_set_leds(struct sony_sc *sc);
+
static inline void sony_schedule_work(struct sony_sc *sc)
{
if (!sc->defer_initialization)
return -EILSEQ;
}
}
+
+ /*
+ * In the case of a DS4 USB dongle, bit[2] of byte 31 indicates
+ * if a DS4 is actually connected (indicated by '0').
+ * For non-dongle, this bit is always 0 (connected).
+ */
+ if (sc->hdev->vendor == USB_VENDOR_ID_SONY &&
+ sc->hdev->product == USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE) {
+ bool connected = (rd[31] & 0x04) ? false : true;
+
+ if (!sc->ds4_dongle_connected && connected) {
+ hid_info(sc->hdev, "DualShock 4 USB dongle: controller connected\n");
+ sony_set_leds(sc);
+ sc->ds4_dongle_connected = true;
+ } else if (sc->ds4_dongle_connected && !connected) {
+ hid_info(sc->hdev, "DualShock 4 USB dongle: controller disconnected\n");
+ sc->ds4_dongle_connected = false;
+ /* Return 0, so hidraw can get the report. */
+ return 0;
+ } else if (!sc->ds4_dongle_connected) {
+ /* Return 0, so hidraw can get the report. */
+ return 0;
+ }
+ }
+
dualshock4_parse_report(sc, rd, size);
}
}
memcpy(sc->mac_address, &buf[1], sizeof(sc->mac_address));
+
+ snprintf(sc->hdev->uniq, sizeof(sc->hdev->uniq),
+ "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ sc->mac_address[5], sc->mac_address[4],
+ sc->mac_address[3], sc->mac_address[2],
+ sc->mac_address[1], sc->mac_address[0]);
} else if ((sc->quirks & SIXAXIS_CONTROLLER_USB) ||
(sc->quirks & NAVIGATION_CONTROLLER_USB)) {
buf = kmalloc(SIXAXIS_REPORT_0xF2_SIZE, GFP_KERNEL);
hid_err(sc->hdev,
"Unable to initialize multi-touch slots: %d\n",
ret);
- return ret;
+ goto err_stop;
}
sony_init_output_report(sc, dualshock4_send_output_report);
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_ELAN, HID_ANY_ID, HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_FUTABA, USB_DEVICE_ID_LED_DISPLAY, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0A4A, HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A, HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE, HID_QUIRK_ALWAYS_POLL },
};
static const u8 lm90_min_alarm_bits[3] = { 5, 3, 11 };
-static const u8 lm90_max_alarm_bits[3] = { 0, 4, 12 };
+static const u8 lm90_max_alarm_bits[3] = { 6, 4, 12 };
static const u8 lm90_crit_alarm_bits[3] = { 0, 1, 9 };
static const u8 lm90_emergency_alarm_bits[3] = { 15, 13, 14 };
static const u8 lm90_fault_bits[3] = { 0, 2, 10 };
[0] = {
.num = ST_ACCEL_FS_AVL_2G,
.value = 0x00,
- .gain = IIO_G_TO_M_S_2(1024),
+ .gain = IIO_G_TO_M_S_2(1000),
},
[1] = {
.num = ST_ACCEL_FS_AVL_6G,
.value = 0x01,
- .gain = IIO_G_TO_M_S_2(340),
+ .gain = IIO_G_TO_M_S_2(3000),
},
},
},
.addr = 0x21,
.mask = 0x40,
},
+ /*
+ * Data Alignment Setting - needs to be set to get
+ * left-justified data like all other sensors.
+ */
+ .das = {
+ .addr = 0x21,
+ .mask = 0x01,
+ },
.drdy_irq = {
.addr = 0x21,
.mask_int1 = 0x04,
config TI_AM335X_ADC
tristate "TI's AM335X ADC driver"
- depends on MFD_TI_AM335X_TSCADC
+ depends on MFD_TI_AM335X_TSCADC && HAS_DMA
select IIO_BUFFER
select IIO_KFIFO_BUF
help
for_each_set_bit(i, indio_dev->active_scan_mask, num_data_channels) {
const struct iio_chan_spec *channel = &indio_dev->channels[i];
- unsigned int bytes_to_read = channel->scan_type.realbits >> 3;
+ unsigned int bytes_to_read =
+ DIV_ROUND_UP(channel->scan_type.realbits +
+ channel->scan_type.shift, 8);
unsigned int storage_bytes =
channel->scan_type.storagebits >> 3;
return err;
}
+ /* set DAS */
+ if (sdata->sensor_settings->das.addr) {
+ err = st_sensors_write_data_with_mask(indio_dev,
+ sdata->sensor_settings->das.addr,
+ sdata->sensor_settings->das.mask, 1);
+ if (err < 0)
+ return err;
+ }
+
if (sdata->int_pin_open_drain) {
dev_info(&indio_dev->dev,
"set interrupt line to open drain mode\n");
int err;
u8 *outdata;
struct st_sensor_data *sdata = iio_priv(indio_dev);
- unsigned int byte_for_channel = ch->scan_type.realbits >> 3;
+ unsigned int byte_for_channel;
+ byte_for_channel = DIV_ROUND_UP(ch->scan_type.realbits +
+ ch->scan_type.shift, 8);
outdata = kmalloc(byte_for_channel, GFP_KERNEL);
if (!outdata)
return -ENOMEM;
ior_cfg = val | priv->preset_enable[chan->channel] << 1;
/* Load I/O control configuration */
- outb(0x40 | ior_cfg, base_offset);
+ outb(0x40 | ior_cfg, base_offset + 1);
return 0;
case IIO_CHAN_INFO_SCALE:
const struct quad8_iio *const priv = iio_priv(indio_dev);
return snprintf(buf, PAGE_SIZE, "%u\n",
- priv->preset_enable[chan->channel]);
+ !priv->preset_enable[chan->channel]);
}
static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
size_t len)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const int base_offset = priv->base + 2 * chan->channel;
+ const int base_offset = priv->base + 2 * chan->channel + 1;
bool preset_enable;
int ret;
unsigned int ior_cfg;
if (ret)
return ret;
+ /* Preset enable is active low in Input/Output Control register */
+ preset_enable = !preset_enable;
+
priv->preset_enable[chan->channel] = preset_enable;
ior_cfg = priv->ab_enable[chan->channel] |
priv->synchronous_mode[chan->channel] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
- outb(0x40 | idr_cfg, base_offset);
+ outb(0x60 | idr_cfg, base_offset);
return 0;
}
priv->index_polarity[chan->channel] = index_polarity;
/* Load Index Control configuration to Index Control Register */
- outb(0x40 | idr_cfg, base_offset);
+ outb(0x60 | idr_cfg, base_offset);
return 0;
}
#define BMI160_REG_DUMMY 0x7F
-#define BMI160_ACCEL_PMU_MIN_USLEEP 3200
-#define BMI160_ACCEL_PMU_MAX_USLEEP 3800
-#define BMI160_GYRO_PMU_MIN_USLEEP 55000
-#define BMI160_GYRO_PMU_MAX_USLEEP 80000
+#define BMI160_ACCEL_PMU_MIN_USLEEP 3800
+#define BMI160_GYRO_PMU_MIN_USLEEP 80000
#define BMI160_SOFTRESET_USLEEP 1000
#define BMI160_CHANNEL(_type, _axis, _index) { \
},
};
-struct bmi160_pmu_time {
- unsigned long min;
- unsigned long max;
-};
-
-static struct bmi160_pmu_time bmi160_pmu_time[] = {
- [BMI160_ACCEL] = {
- .min = BMI160_ACCEL_PMU_MIN_USLEEP,
- .max = BMI160_ACCEL_PMU_MAX_USLEEP
- },
- [BMI160_GYRO] = {
- .min = BMI160_GYRO_PMU_MIN_USLEEP,
- .max = BMI160_GYRO_PMU_MIN_USLEEP,
- },
+static unsigned long bmi160_pmu_time[] = {
+ [BMI160_ACCEL] = BMI160_ACCEL_PMU_MIN_USLEEP,
+ [BMI160_GYRO] = BMI160_GYRO_PMU_MIN_USLEEP,
};
struct bmi160_scale {
if (ret < 0)
return ret;
- usleep_range(bmi160_pmu_time[t].min, bmi160_pmu_time[t].max);
+ usleep_range(bmi160_pmu_time[t], bmi160_pmu_time[t] + 1000);
return 0;
}
"0.100 "
"0.025 "
"0.00625 "
- "0.001625";
+ "0.0015625";
/* Available scales (internal to ulux) with pretty manual alignment: */
static const int max44000_scale_avail_ulux_array[] = {
size += ret;
}
+ if (mlx4_is_master(mdev->dev) && flow_type == MLX4_FS_REGULAR &&
+ flow_attr->num_of_specs == 1) {
+ struct _rule_hw *rule_header = (struct _rule_hw *)(ctrl + 1);
+ enum ib_flow_spec_type header_spec =
+ ((union ib_flow_spec *)(flow_attr + 1))->type;
+
+ if (header_spec == IB_FLOW_SPEC_ETH)
+ mlx4_handle_eth_header_mcast_prio(ctrl, rule_header);
+ }
+
ret = mlx4_cmd_imm(mdev->dev, mailbox->dma, reg_id, size >> 2, 0,
MLX4_QP_FLOW_STEERING_ATTACH, MLX4_CMD_TIME_CLASS_A,
- MLX4_CMD_WRAPPED);
+ MLX4_CMD_NATIVE);
if (ret == -ENOMEM)
pr_err("mcg table is full. Fail to register network rule.\n");
else if (ret == -ENXIO)
int err;
err = mlx4_cmd(dev, reg_id, 0, 0,
MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A,
- MLX4_CMD_WRAPPED);
+ MLX4_CMD_NATIVE);
if (err)
pr_err("Fail to detach network rule. registration id = 0x%llx\n",
reg_id);
next_tail = (tail + sizeof(*cmd)) % CMD_BUFFER_SIZE;
left = (head - next_tail) % CMD_BUFFER_SIZE;
- if (left <= 2) {
+ if (left <= 0x20) {
struct iommu_cmd sync_cmd;
int ret;
x86_init.iommu.iommu_init = intel_iommu_init;
#endif
- acpi_put_table(dmar_tbl);
- dmar_tbl = NULL;
+ if (dmar_tbl) {
+ acpi_put_table(dmar_tbl);
+ dmar_tbl = NULL;
+ }
up_write(&dmar_global_lock);
return ret ? 1 : -ENODEV;
if (context_present(context))
goto out_unlock;
+ /*
+ * For kdump cases, old valid entries may be cached due to the
+ * in-flight DMA and copied pgtable, but there is no unmapping
+ * behaviour for them, thus we need an explicit cache flush for
+ * the newly-mapped device. For kdump, at this point, the device
+ * is supposed to finish reset at its driver probe stage, so no
+ * in-flight DMA will exist, and we don't need to worry anymore
+ * hereafter.
+ */
+ if (context_copied(context)) {
+ u16 did_old = context_domain_id(context);
+
+ if (did_old >= 0 && did_old < cap_ndoms(iommu->cap))
+ iommu->flush.flush_context(iommu, did_old,
+ (((u16)bus) << 8) | devfn,
+ DMA_CCMD_MASK_NOBIT,
+ DMA_CCMD_DEVICE_INVL);
+ }
+
pgd = domain->pgd;
context_clear_entry(context);
}
#ifdef CONFIG_INTEL_IOMMU_SVM
+#define MAX_NR_PASID_BITS (20)
+static inline unsigned long intel_iommu_get_pts(struct intel_iommu *iommu)
+{
+ /*
+ * Convert ecap_pss to extend context entry pts encoding, also
+ * respect the soft pasid_max value set by the iommu.
+ * - number of PASID bits = ecap_pss + 1
+ * - number of PASID table entries = 2^(pts + 5)
+ * Therefore, pts = ecap_pss - 4
+ * e.g. KBL ecap_pss = 0x13, PASID has 20 bits, pts = 15
+ */
+ if (ecap_pss(iommu->ecap) < 5)
+ return 0;
+
+ /* pasid_max is encoded as actual number of entries not the bits */
+ return find_first_bit((unsigned long *)&iommu->pasid_max,
+ MAX_NR_PASID_BITS) - 5;
+}
+
int intel_iommu_enable_pasid(struct intel_iommu *iommu, struct intel_svm_dev *sdev)
{
struct device_domain_info *info;
if (!(ctx_lo & CONTEXT_PASIDE)) {
context[1].hi = (u64)virt_to_phys(iommu->pasid_state_table);
- context[1].lo = (u64)virt_to_phys(iommu->pasid_table) | ecap_pss(iommu->ecap);
+ context[1].lo = (u64)virt_to_phys(iommu->pasid_table) |
+ intel_iommu_get_pts(iommu);
+
wmb();
/* CONTEXT_TT_MULTI_LEVEL and CONTEXT_TT_DEV_IOTLB are both
* extended to permit requests-with-PASID if the PASIDE bit
EXPORT_SYMBOL_GPL(mei_cldev_enabled);
/**
- * mei_cldev_enable_device - enable me client device
+ * mei_cldev_enable - enable me client device
* create connection with me client
*
* @cldev: me client device
rets = first_chunk ? mei_cl_tx_flow_ctrl_creds(cl) : 1;
if (rets < 0)
- return rets;
+ goto err;
if (rets == 0) {
cl_dbg(dev, cl, "No flow control credentials: not sending.\n");
cb->buf.size, cb->buf_idx);
rets = mei_write_message(dev, &mei_hdr, buf->data + cb->buf_idx);
- if (rets) {
- cl->status = rets;
- list_move_tail(&cb->list, &cmpl_list->list);
- return rets;
- }
+ if (rets)
+ goto err;
cl->status = 0;
cl->writing_state = MEI_WRITING;
cb->completed = mei_hdr.msg_complete == 1;
if (first_chunk) {
- if (mei_cl_tx_flow_ctrl_creds_reduce(cl))
- return -EIO;
+ if (mei_cl_tx_flow_ctrl_creds_reduce(cl)) {
+ rets = -EIO;
+ goto err;
+ }
}
if (mei_hdr.msg_complete)
list_move_tail(&cb->list, &dev->write_waiting_list.list);
return 0;
+
+err:
+ cl->status = rets;
+ list_move_tail(&cb->list, &cmpl_list->list);
+ return rets;
}
/**
goto out;
}
- /* Insert TSB and checksum infos */
- if (priv->tsb_en) {
- skb = bcm_sysport_insert_tsb(skb, dev);
- if (!skb) {
- ret = NETDEV_TX_OK;
- goto out;
- }
- }
-
/* The Ethernet switch we are interfaced with needs packets to be at
* least 64 bytes (including FCS) otherwise they will be discarded when
* they enter the switch port logic. When Broadcom tags are enabled, we
* (including FCS and tag) because the length verification is done after
* the Broadcom tag is stripped off the ingress packet.
*/
- if (skb_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
+ if (skb_put_padto(skb, ETH_ZLEN + ENET_BRCM_TAG_LEN)) {
ret = NETDEV_TX_OK;
goto out;
}
- skb_len = skb->len < ETH_ZLEN + ENET_BRCM_TAG_LEN ?
- ETH_ZLEN + ENET_BRCM_TAG_LEN : skb->len;
+ /* Insert TSB and checksum infos */
+ if (priv->tsb_en) {
+ skb = bcm_sysport_insert_tsb(skb, dev);
+ if (!skb) {
+ ret = NETDEV_TX_OK;
+ goto out;
+ }
+ }
+
+ skb_len = skb->len;
mapping = dma_map_single(kdev, skb->data, skb_len, DMA_TO_DEVICE);
if (dma_mapping_error(kdev, mapping)) {
/**
- * macb_pci.c - Cadence GEM PCI wrapper.
+ * Cadence GEM PCI wrapper.
*
* Copyright (C) 2016 Cadence Design Systems - http://www.cadence.com
*
struct macb_platform_data plat_data;
struct resource res[2];
- /* sanity check */
- if (!id)
- return -EINVAL;
-
/* enable pci device */
- err = pci_enable_device(pdev);
+ err = pcim_enable_device(pdev);
if (err < 0) {
- dev_err(&pdev->dev, "Enabling PCI device has failed: 0x%04X",
- err);
- return -EACCES;
+ dev_err(&pdev->dev, "Enabling PCI device has failed: %d", err);
+ return err;
}
pci_set_master(pdev);
/* set up resources */
memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
- res[0].start = pdev->resource[0].start;
- res[0].end = pdev->resource[0].end;
+ res[0].start = pci_resource_start(pdev, 0);
+ res[0].end = pci_resource_end(pdev, 0);
res[0].name = PCI_DRIVER_NAME;
res[0].flags = IORESOURCE_MEM;
- res[1].start = pdev->irq;
+ res[1].start = pci_irq_vector(pdev, 0);
res[1].name = PCI_DRIVER_NAME;
res[1].flags = IORESOURCE_IRQ;
- dev_info(&pdev->dev, "EMAC physical base addr = 0x%p\n",
- (void *)(uintptr_t)pci_resource_start(pdev, 0));
+ dev_info(&pdev->dev, "EMAC physical base addr: %pa\n",
+ &res[0].start);
/* set up macb platform data */
memset(&plat_data, 0, sizeof(plat_data));
plat_info.num_res = ARRAY_SIZE(res);
plat_info.data = &plat_data;
plat_info.size_data = sizeof(plat_data);
- plat_info.dma_mask = DMA_BIT_MASK(32);
+ plat_info.dma_mask = pdev->dma_mask;
/* register platform device */
plat_dev = platform_device_register_full(&plat_info);
clk_unregister(plat_data.pclk);
err_pclk_register:
- pci_disable_device(pdev);
return err;
}
struct macb_platform_data *plat_data = dev_get_platdata(&plat_dev->dev);
platform_device_unregister(plat_dev);
- pci_disable_device(pdev);
clk_unregister(plat_data->pclk);
clk_unregister(plat_data->hclk);
}
config LIQUIDIO_VF
tristate "Cavium LiquidIO VF support"
depends on 64BIT && PCI_MSI
- select PTP_1588_CLOCK
+ imply PTP_1588_CLOCK
---help---
This driver supports Cavium LiquidIO Intelligent Server Adapter
based on CN23XX chips.
if (ipv6_addr_type(&fl6.daddr) & IPV6_ADDR_LINKLOCAL)
fl6.flowi6_oif = sin6_scope_id;
dst = ip6_route_output(&init_net, NULL, &fl6);
- if (!dst)
- goto out;
- if (!cxgb_our_interface(lldi, get_real_dev,
- ip6_dst_idev(dst)->dev) &&
- !(ip6_dst_idev(dst)->dev->flags & IFF_LOOPBACK)) {
+ if (dst->error ||
+ (!cxgb_our_interface(lldi, get_real_dev,
+ ip6_dst_idev(dst)->dev) &&
+ !(ip6_dst_idev(dst)->dev->flags & IFF_LOOPBACK))) {
dst_release(dst);
- dst = NULL;
+ return NULL;
}
}
-out:
return dst;
}
EXPORT_SYMBOL(cxgb_find_route6);
skb->inner_protocol_type != ENCAP_TYPE_ETHER ||
skb->inner_protocol != htons(ETH_P_TEB) ||
skb_inner_mac_header(skb) - skb_transport_header(skb) !=
- sizeof(struct udphdr) + sizeof(struct vxlanhdr))
+ sizeof(struct udphdr) + sizeof(struct vxlanhdr) ||
+ !adapter->vxlan_port ||
+ udp_hdr(skb)->dest != adapter->vxlan_port)
return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
return features;
priv->cgr_data.cgr.cb = dpaa_eth_cgscn;
/* Enable Congestion State Change Notifications and CS taildrop */
+ memset(&initcgr, 0, sizeof(initcgr));
initcgr.we_mask = cpu_to_be16(QM_CGR_WE_CSCN_EN | QM_CGR_WE_CS_THRES);
initcgr.cgr.cscn_en = QM_CGR_EN;
net_dev->phydev = mac_dev->init_phy(net_dev, priv->mac_dev);
if (!net_dev->phydev) {
netif_err(priv, ifup, net_dev, "init_phy() failed\n");
- return -ENODEV;
+ err = -ENODEV;
+ goto phy_init_failed;
}
for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) {
for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++)
fman_port_disable(mac_dev->port[i]);
+phy_init_failed:
dpaa_eth_napi_disable(priv);
return err;
}
/* Enable CS TD, but disable Congestion State Change Notifications. */
+ memset(&initcgr, 0, sizeof(initcgr));
initcgr.we_mask = cpu_to_be16(QM_CGR_WE_CS_THRES);
initcgr.cgr.cscn_en = QM_CGR_EN;
cs_th = DPAA_INGRESS_CS_THRESHOLD;
DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR,
&lp->rx_dma_regs->dmasm);
- korina_free_ring(dev);
-
napi_disable(&lp->napi);
+ korina_free_ring(dev);
+
if (korina_init(dev) < 0) {
printk(KERN_ERR "%s: cannot restart device\n", dev->name);
return;
tmp = tmp | DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR;
writel(tmp, &lp->rx_dma_regs->dmasm);
- korina_free_ring(dev);
-
napi_disable(&lp->napi);
cancel_work_sync(&lp->restart_task);
+ korina_free_ring(dev);
+
free_irq(lp->rx_irq, dev);
free_irq(lp->tx_irq, dev);
free_irq(lp->ovr_irq, dev);
{
u32 freq_khz = freq * 1000;
u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC;
- u64 tmp_rounded =
- roundup_pow_of_two(max_val_cycles) > max_val_cycles ?
- roundup_pow_of_two(max_val_cycles) - 1 : UINT_MAX;
- u64 max_val_cycles_rounded = is_power_of_2(max_val_cycles + 1) ?
- max_val_cycles : tmp_rounded;
+ u64 max_val_cycles_rounded = 1ULL << fls64(max_val_cycles - 1);
/* calculate max possible multiplier in order to fit in 64bit */
- u64 max_mul = div_u64(0xffffffffffffffffULL, max_val_cycles_rounded);
+ u64 max_mul = div64_u64(ULLONG_MAX, max_val_cycles_rounded);
/* This comes from the reverse of clocksource_khz2mult */
return ilog2(div_u64(max_mul * freq_khz, 1000000));
/* Configure tx cq's and rings */
for (t = 0 ; t < MLX4_EN_NUM_TX_TYPES; t++) {
- u8 num_tx_rings_p_up = t == TX ? priv->num_tx_rings_p_up : 1;
+ u8 num_tx_rings_p_up = t == TX ?
+ priv->num_tx_rings_p_up : priv->tx_ring_num[t];
for (i = 0; i < priv->tx_ring_num[t]; i++) {
/* Configure cq */
ring->cqn = priv->rx_cq[ring_ind]->mcq.cqn;
ring->stride = stride;
- if (ring->stride <= TXBB_SIZE)
+ if (ring->stride <= TXBB_SIZE) {
+ /* Stamp first unused send wqe */
+ __be32 *ptr = (__be32 *)ring->buf;
+ __be32 stamp = cpu_to_be32(1 << STAMP_SHIFT);
+ *ptr = stamp;
+ /* Move pointer to start of rx section */
ring->buf += TXBB_SIZE;
+ }
ring->log_stride = ffs(ring->stride) - 1;
ring->buf_size = ring->size * ring->stride;
if (!buf)
return -ENOMEM;
+ if (offset_in_page(buf)) {
+ dma_free_coherent(dev, PAGE_SIZE << order,
+ buf, sg_dma_address(mem));
+ return -ENOMEM;
+ }
+
sg_set_buf(mem, buf, PAGE_SIZE << order);
- BUG_ON(mem->offset);
sg_dma_len(mem) = PAGE_SIZE << order;
return 0;
}
#include <linux/io-mapping.h>
#include <linux/delay.h>
#include <linux/kmod.h>
+#include <linux/etherdevice.h>
#include <net/devlink.h>
#include <linux/mlx4/device.h>
}
EXPORT_SYMBOL(mlx4_is_slave_active);
+void mlx4_handle_eth_header_mcast_prio(struct mlx4_net_trans_rule_hw_ctrl *ctrl,
+ struct _rule_hw *eth_header)
+{
+ if (is_multicast_ether_addr(eth_header->eth.dst_mac) ||
+ is_broadcast_ether_addr(eth_header->eth.dst_mac)) {
+ struct mlx4_net_trans_rule_hw_eth *eth =
+ (struct mlx4_net_trans_rule_hw_eth *)eth_header;
+ struct _rule_hw *next_rule = (struct _rule_hw *)(eth + 1);
+ bool last_rule = next_rule->size == 0 && next_rule->id == 0 &&
+ next_rule->rsvd == 0;
+
+ if (last_rule)
+ ctrl->prio = cpu_to_be16(MLX4_DOMAIN_NIC);
+ }
+}
+EXPORT_SYMBOL(mlx4_handle_eth_header_mcast_prio);
+
static void slave_adjust_steering_mode(struct mlx4_dev *dev,
struct mlx4_dev_cap *dev_cap,
struct mlx4_init_hca_param *hca_param)
return 0;
}
-static void handle_eth_header_mcast_prio(struct mlx4_net_trans_rule_hw_ctrl *ctrl,
- struct _rule_hw *eth_header)
-{
- if (is_multicast_ether_addr(eth_header->eth.dst_mac) ||
- is_broadcast_ether_addr(eth_header->eth.dst_mac)) {
- struct mlx4_net_trans_rule_hw_eth *eth =
- (struct mlx4_net_trans_rule_hw_eth *)eth_header;
- struct _rule_hw *next_rule = (struct _rule_hw *)(eth + 1);
- bool last_rule = next_rule->size == 0 && next_rule->id == 0 &&
- next_rule->rsvd == 0;
-
- if (last_rule)
- ctrl->prio = cpu_to_be16(MLX4_DOMAIN_NIC);
- }
-}
-
/*
* In case of missing eth header, append eth header with a MAC address
* assigned to the VF.
header_id = map_hw_to_sw_id(be16_to_cpu(rule_header->id));
if (header_id == MLX4_NET_TRANS_RULE_ID_ETH)
- handle_eth_header_mcast_prio(ctrl, rule_header);
-
- if (slave == dev->caps.function)
- goto execute;
+ mlx4_handle_eth_header_mcast_prio(ctrl, rule_header);
switch (header_id) {
case MLX4_NET_TRANS_RULE_ID_ETH:
goto err_put_qp;
}
-execute:
err = mlx4_cmd_imm(dev, inbox->dma, &vhcr->out_param,
vhcr->in_modifier, 0,
MLX4_QP_FLOW_STEERING_ATTACH, MLX4_CMD_TIME_CLASS_A,
struct res_qp *rqp;
struct res_fs_rule *rrule;
u64 mirr_reg_id;
+ int qpn;
if (dev->caps.steering_mode !=
MLX4_STEERING_MODE_DEVICE_MANAGED)
}
mirr_reg_id = rrule->mirr_rule_id;
kfree(rrule->mirr_mbox);
+ qpn = rrule->qpn;
/* Release the rule form busy state before removal */
put_res(dev, slave, vhcr->in_param, RES_FS_RULE);
- err = get_res(dev, slave, rrule->qpn, RES_QP, &rqp);
+ err = get_res(dev, slave, qpn, RES_QP, &rqp);
if (err)
return err;
if (!err)
atomic_dec(&rqp->ref_count);
out:
- put_res(dev, slave, rrule->qpn, RES_QP);
+ put_res(dev, slave, qpn, RES_QP);
return err;
}
int i;
struct ieee_ets ets;
+ if (!MLX5_CAP_GEN(priv->mdev, ets))
+ return;
+
memset(&ets, 0, sizeof(ets));
ets.ets_cap = mlx5_max_tc(priv->mdev) + 1;
for (i = 0; i < ets.ets_cap; i++) {
return NUM_SW_COUNTERS +
MLX5E_NUM_Q_CNTRS(priv) +
NUM_VPORT_COUNTERS + NUM_PPORT_COUNTERS +
- NUM_PCIE_COUNTERS +
MLX5E_NUM_RQ_STATS(priv) +
MLX5E_NUM_SQ_STATS(priv) +
MLX5E_NUM_PFC_COUNTERS(priv) +
strcpy(data + (idx++) * ETH_GSTRING_LEN,
pport_2819_stats_desc[i].format);
- for (i = 0; i < NUM_PCIE_PERF_COUNTERS; i++)
- strcpy(data + (idx++) * ETH_GSTRING_LEN,
- pcie_perf_stats_desc[i].format);
-
- for (i = 0; i < NUM_PCIE_TAS_COUNTERS; i++)
- strcpy(data + (idx++) * ETH_GSTRING_LEN,
- pcie_tas_stats_desc[i].format);
-
for (prio = 0; prio < NUM_PPORT_PRIO; prio++) {
for (i = 0; i < NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS; i++)
sprintf(data + (idx++) * ETH_GSTRING_LEN,
data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pport.RFC_2819_counters,
pport_2819_stats_desc, i);
- for (i = 0; i < NUM_PCIE_PERF_COUNTERS; i++)
- data[idx++] = MLX5E_READ_CTR32_BE(&priv->stats.pcie.pcie_perf_counters,
- pcie_perf_stats_desc, i);
-
- for (i = 0; i < NUM_PCIE_TAS_COUNTERS; i++)
- data[idx++] = MLX5E_READ_CTR32_BE(&priv->stats.pcie.pcie_tas_counters,
- pcie_tas_stats_desc, i);
-
for (prio = 0; prio < NUM_PPORT_PRIO; prio++) {
for (i = 0; i < NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS; i++)
data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pport.per_prio_counters[prio],
}
if (fs->flow_type & FLOW_MAC_EXT &&
!is_zero_ether_addr(fs->m_ext.h_dest)) {
+ mask_spec(fs->m_ext.h_dest, fs->h_ext.h_dest, ETH_ALEN);
ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4,
outer_headers_c, dmac_47_16),
fs->m_ext.h_dest);
&qcnt->rx_out_of_buffer);
}
-static void mlx5e_update_pcie_counters(struct mlx5e_priv *priv)
-{
- struct mlx5e_pcie_stats *pcie_stats = &priv->stats.pcie;
- struct mlx5_core_dev *mdev = priv->mdev;
- int sz = MLX5_ST_SZ_BYTES(mpcnt_reg);
- void *out;
- u32 *in;
-
- in = mlx5_vzalloc(sz);
- if (!in)
- return;
-
- out = pcie_stats->pcie_perf_counters;
- MLX5_SET(mpcnt_reg, in, grp, MLX5_PCIE_PERFORMANCE_COUNTERS_GROUP);
- mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_MPCNT, 0, 0);
-
- out = pcie_stats->pcie_tas_counters;
- MLX5_SET(mpcnt_reg, in, grp, MLX5_PCIE_TIMERS_AND_STATES_COUNTERS_GROUP);
- mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_MPCNT, 0, 0);
-
- kvfree(in);
-}
-
void mlx5e_update_stats(struct mlx5e_priv *priv)
{
mlx5e_update_q_counter(priv);
mlx5e_update_vport_counters(priv);
mlx5e_update_pport_counters(priv);
mlx5e_update_sw_counters(priv);
- mlx5e_update_pcie_counters(priv);
}
void mlx5e_update_stats_work(struct work_struct *work)
mlx5_lag_add(mdev, netdev);
- if (mlx5e_vxlan_allowed(mdev)) {
- rtnl_lock();
- udp_tunnel_get_rx_info(netdev);
- rtnl_unlock();
- }
-
mlx5e_enable_async_events(priv);
- queue_work(priv->wq, &priv->set_rx_mode_work);
if (MLX5_CAP_GEN(mdev, vport_group_manager)) {
mlx5_query_nic_vport_mac_address(mdev, 0, rep.hw_id);
rep.netdev = netdev;
mlx5_eswitch_register_vport_rep(esw, 0, &rep);
}
+
+ if (netdev->reg_state != NETREG_REGISTERED)
+ return;
+
+ /* Device already registered: sync netdev system state */
+ if (mlx5e_vxlan_allowed(mdev)) {
+ rtnl_lock();
+ udp_tunnel_get_rx_info(netdev);
+ rtnl_unlock();
+ }
+
+ queue_work(priv->wq, &priv->set_rx_mode_work);
}
static void mlx5e_nic_disable(struct mlx5e_priv *priv)
const struct mlx5e_profile *profile = priv->profile;
set_bit(MLX5E_STATE_DESTROYING, &priv->state);
- if (profile->disable)
- profile->disable(priv);
-
- flush_workqueue(priv->wq);
rtnl_lock();
if (netif_running(netdev))
netif_device_detach(netdev);
rtnl_unlock();
+ if (profile->disable)
+ profile->disable(priv);
+ flush_workqueue(priv->wq);
+
mlx5e_destroy_q_counter(priv);
profile->cleanup_rx(priv);
mlx5e_close_drop_rq(priv);
#define MLX5E_READ_CTR32_CPU(ptr, dsc, i) \
(*(u32 *)((char *)ptr + dsc[i].offset))
#define MLX5E_READ_CTR32_BE(ptr, dsc, i) \
- be32_to_cpu(*(__be32 *)((char *)ptr + dsc[i].offset))
+ be64_to_cpu(*(__be32 *)((char *)ptr + dsc[i].offset))
#define MLX5E_DECLARE_STAT(type, fld) #fld, offsetof(type, fld)
#define MLX5E_DECLARE_RX_STAT(type, fld) "rx%d_"#fld, offsetof(type, fld)
{ "rx_%s_pause_transition", PPORT_PER_PRIO_OFF(rx_pause_transition) },
};
-#define PCIE_PERF_OFF(c) \
- MLX5_BYTE_OFF(mpcnt_reg, counter_set.pcie_perf_cntrs_grp_data_layout.c)
-#define PCIE_PERF_GET(pcie_stats, c) \
- MLX5_GET(mpcnt_reg, pcie_stats->pcie_perf_counters, \
- counter_set.pcie_perf_cntrs_grp_data_layout.c)
-#define PCIE_TAS_OFF(c) \
- MLX5_BYTE_OFF(mpcnt_reg, counter_set.pcie_tas_cntrs_grp_data_layout.c)
-#define PCIE_TAS_GET(pcie_stats, c) \
- MLX5_GET(mpcnt_reg, pcie_stats->pcie_tas_counters, \
- counter_set.pcie_tas_cntrs_grp_data_layout.c)
-
-struct mlx5e_pcie_stats {
- __be64 pcie_perf_counters[MLX5_ST_SZ_QW(mpcnt_reg)];
- __be64 pcie_tas_counters[MLX5_ST_SZ_QW(mpcnt_reg)];
-};
-
-static const struct counter_desc pcie_perf_stats_desc[] = {
- { "rx_pci_signal_integrity", PCIE_PERF_OFF(rx_errors) },
- { "tx_pci_signal_integrity", PCIE_PERF_OFF(tx_errors) },
-};
-
-static const struct counter_desc pcie_tas_stats_desc[] = {
- { "tx_pci_transport_nonfatal_msg", PCIE_TAS_OFF(non_fatal_err_msg_sent) },
- { "tx_pci_transport_fatal_msg", PCIE_TAS_OFF(fatal_err_msg_sent) },
-};
-
struct mlx5e_rq_stats {
u64 packets;
u64 bytes;
#define NUM_PPORT_802_3_COUNTERS ARRAY_SIZE(pport_802_3_stats_desc)
#define NUM_PPORT_2863_COUNTERS ARRAY_SIZE(pport_2863_stats_desc)
#define NUM_PPORT_2819_COUNTERS ARRAY_SIZE(pport_2819_stats_desc)
-#define NUM_PCIE_PERF_COUNTERS ARRAY_SIZE(pcie_perf_stats_desc)
-#define NUM_PCIE_TAS_COUNTERS ARRAY_SIZE(pcie_tas_stats_desc)
#define NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS \
ARRAY_SIZE(pport_per_prio_traffic_stats_desc)
#define NUM_PPORT_PER_PRIO_PFC_COUNTERS \
NUM_PPORT_2819_COUNTERS + \
NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS * \
NUM_PPORT_PRIO)
-#define NUM_PCIE_COUNTERS (NUM_PCIE_PERF_COUNTERS + NUM_PCIE_TAS_COUNTERS)
#define NUM_RQ_STATS ARRAY_SIZE(rq_stats_desc)
#define NUM_SQ_STATS ARRAY_SIZE(sq_stats_desc)
struct mlx5e_qcounter_stats qcnt;
struct mlx5e_vport_stats vport;
struct mlx5e_pport_stats pport;
- struct mlx5e_pcie_stats pcie;
struct rtnl_link_stats64 vf_vport;
};
if (!ESW_ALLOWED(esw))
return -EPERM;
- if (!LEGAL_VPORT(esw, vport))
+ if (!LEGAL_VPORT(esw, vport) || is_multicast_ether_addr(mac))
return -EINVAL;
mutex_lock(&esw->state_lock);
if (err)
goto err_reps;
}
+
+ /* disable PF RoCE so missed packets don't go through RoCE steering */
+ mlx5_dev_list_lock();
+ mlx5_remove_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+ mlx5_dev_list_unlock();
+
return 0;
err_reps:
{
int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs;
+ /* enable back PF RoCE */
+ mlx5_dev_list_lock();
+ mlx5_add_dev_by_protocol(esw->dev, MLX5_INTERFACE_PROTOCOL_IB);
+ mlx5_dev_list_unlock();
+
mlx5_eswitch_disable_sriov(esw);
err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY);
if (err) {
nested_lock_ref_node(&fte->node, FS_MUTEX_CHILD);
handle = add_rule_fte(fte, fg, dest, dest_num, false);
if (IS_ERR(handle)) {
+ unlock_ref_node(&fte->node);
kfree(fte);
goto unlock_fg;
}
MLX5_SET(cmd_hca_cap, set_hca_cap, pkey_table_size,
to_fw_pkey_sz(dev, 128));
+ /* Check log_max_qp from HCA caps to set in current profile */
+ if (MLX5_CAP_GEN_MAX(dev, log_max_qp) < profile[prof_sel].log_max_qp) {
+ mlx5_core_warn(dev, "log_max_qp value in current profile is %d, changing it to HCA capability limit (%d)\n",
+ profile[prof_sel].log_max_qp,
+ MLX5_CAP_GEN_MAX(dev, log_max_qp));
+ profile[prof_sel].log_max_qp = MLX5_CAP_GEN_MAX(dev, log_max_qp);
+ }
if (prof->mask & MLX5_PROF_MASK_QP_SIZE)
MLX5_SET(cmd_hca_cap, set_hca_cap, log_max_qp,
prof->log_max_qp);
struct mlx5_priv *priv = &mdev->priv;
struct msix_entry *msix = priv->msix_arr;
int irq = msix[i + MLX5_EQ_VEC_COMP_BASE].vector;
- int numa_node = priv->numa_node;
int err;
if (!zalloc_cpumask_var(&priv->irq_info[i].mask, GFP_KERNEL)) {
return -ENOMEM;
}
- cpumask_set_cpu(cpumask_local_spread(i, numa_node),
+ cpumask_set_cpu(cpumask_local_spread(i, priv->numa_node),
priv->irq_info[i].mask);
err = irq_set_affinity_hint(irq, priv->irq_info[i].mask);
{
int err = 0;
+ mlx5_drain_health_wq(dev);
+
mutex_lock(&dev->intf_state_mutex);
if (test_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state)) {
dev_warn(&dev->pdev->dev, "%s: interface is down, NOP\n",
mlx5_enter_error_state(dev);
mlx5_unload_one(dev, priv, false);
- /* In case of kernel call save the pci state and drain health wq */
+ /* In case of kernel call save the pci state */
if (state) {
pci_save_state(pdev);
- mlx5_drain_health_wq(dev);
mlx5_pci_disable_device(dev);
}
static const struct pci_device_id rtl8169_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8129), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8136), 0, 0, RTL_CFG_2 },
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8161), 0, 0, RTL_CFG_1 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168), 0, 0, RTL_CFG_1 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), 0, 0, RTL_CFG_0 },
.tsu = 1,
.hw_crc = 1,
.select_mii = 1,
+ .shift_rd0 = 1,
};
/* SH7763 */
else
goto out;
- if (!likely(mdp->irq_enabled)) {
+ if (unlikely(!mdp->irq_enabled)) {
sh_eth_write(ndev, 0, EESIPR);
goto out;
}
}
/* don't fail init if RSS setup doesn't work */
- efx->type->rx_push_rss_config(efx, false, efx->rx_indir_table);
+ rc = efx->type->rx_push_rss_config(efx, false, efx->rx_indir_table);
+ efx->rss_active = (rc == 0);
return 0;
}
case ETHTOOL_GRXFH: {
info->data = 0;
+ if (!efx->rss_active) /* No RSS */
+ return 0;
switch (info->flow_type) {
case UDP_V4_FLOW:
if (efx->rx_hash_udp_4tuple)
* @rx_hash_key: Toeplitz hash key for RSS
* @rx_indir_table: Indirection table for RSS
* @rx_scatter: Scatter mode enabled for receives
+ * @rss_active: RSS enabled on hardware
* @rx_hash_udp_4tuple: UDP 4-tuple hashing enabled
* @int_error_count: Number of internal errors seen recently
* @int_error_expire: Time at which error count will be expired
u8 rx_hash_key[40];
u32 rx_indir_table[128];
bool rx_scatter;
+ bool rss_active;
bool rx_hash_udp_4tuple;
unsigned int_error_count;
efx_writeo(efx, &temp, FR_AZ_RX_CFG);
siena_rx_push_rss_config(efx, false, efx->rx_indir_table);
+ efx->rss_active = true;
/* Enable event logging */
rc = efx_mcdi_log_ctrl(efx, true, false, 0);
struct regmap *regmap;
};
-static int oxnas_dwmac_init(struct oxnas_dwmac *dwmac)
+static int oxnas_dwmac_init(struct platform_device *pdev, void *priv)
{
+ struct oxnas_dwmac *dwmac = priv;
unsigned int value;
int ret;
return 0;
}
+static void oxnas_dwmac_exit(struct platform_device *pdev, void *priv)
+{
+ struct oxnas_dwmac *dwmac = priv;
+
+ clk_disable_unprepare(dwmac->clk);
+}
+
static int oxnas_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
- struct device_node *sysctrl;
struct oxnas_dwmac *dwmac;
int ret;
- sysctrl = of_parse_phandle(pdev->dev.of_node, "oxsemi,sys-ctrl", 0);
- if (!sysctrl) {
- dev_err(&pdev->dev, "failed to get sys-ctrl node\n");
- return -EINVAL;
- }
-
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
return PTR_ERR(plat_dat);
dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
- if (!dwmac)
- return -ENOMEM;
+ if (!dwmac) {
+ ret = -ENOMEM;
+ goto err_remove_config_dt;
+ }
dwmac->dev = &pdev->dev;
plat_dat->bsp_priv = dwmac;
+ plat_dat->init = oxnas_dwmac_init;
+ plat_dat->exit = oxnas_dwmac_exit;
- dwmac->regmap = syscon_node_to_regmap(sysctrl);
+ dwmac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "oxsemi,sys-ctrl");
if (IS_ERR(dwmac->regmap)) {
dev_err(&pdev->dev, "failed to have sysctrl regmap\n");
- return PTR_ERR(dwmac->regmap);
+ ret = PTR_ERR(dwmac->regmap);
+ goto err_remove_config_dt;
}
dwmac->clk = devm_clk_get(&pdev->dev, "gmac");
- if (IS_ERR(dwmac->clk))
- return PTR_ERR(dwmac->clk);
+ if (IS_ERR(dwmac->clk)) {
+ ret = PTR_ERR(dwmac->clk);
+ goto err_remove_config_dt;
+ }
- ret = oxnas_dwmac_init(dwmac);
+ ret = oxnas_dwmac_init(pdev, plat_dat->bsp_priv);
if (ret)
- return ret;
+ goto err_remove_config_dt;
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
if (ret)
- clk_disable_unprepare(dwmac->clk);
+ goto err_dwmac_exit;
- return ret;
-}
-static int oxnas_dwmac_remove(struct platform_device *pdev)
-{
- struct oxnas_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);
- int ret = stmmac_dvr_remove(&pdev->dev);
-
- clk_disable_unprepare(dwmac->clk);
-
- return ret;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int oxnas_dwmac_suspend(struct device *dev)
-{
- struct oxnas_dwmac *dwmac = get_stmmac_bsp_priv(dev);
- int ret;
-
- ret = stmmac_suspend(dev);
- clk_disable_unprepare(dwmac->clk);
-
- return ret;
-}
-
-static int oxnas_dwmac_resume(struct device *dev)
-{
- struct oxnas_dwmac *dwmac = get_stmmac_bsp_priv(dev);
- int ret;
-
- ret = oxnas_dwmac_init(dwmac);
- if (ret)
- return ret;
+ return 0;
- ret = stmmac_resume(dev);
+err_dwmac_exit:
+ oxnas_dwmac_exit(pdev, plat_dat->bsp_priv);
+err_remove_config_dt:
+ stmmac_remove_config_dt(pdev, plat_dat);
return ret;
}
-#endif /* CONFIG_PM_SLEEP */
-
-static SIMPLE_DEV_PM_OPS(oxnas_dwmac_pm_ops,
- oxnas_dwmac_suspend, oxnas_dwmac_resume);
static const struct of_device_id oxnas_dwmac_match[] = {
{ .compatible = "oxsemi,ox820-dwmac" },
static struct platform_driver oxnas_dwmac_driver = {
.probe = oxnas_dwmac_probe,
- .remove = oxnas_dwmac_remove,
+ .remove = stmmac_pltfr_remove,
.driver = {
.name = "oxnas-dwmac",
- .pm = &oxnas_dwmac_pm_ops,
+ .pm = &stmmac_pltfr_pm_ops,
.of_match_table = oxnas_dwmac_match,
},
};
spin_lock_init(&priv->lock);
- ret = register_netdev(ndev);
- if (ret) {
- netdev_err(priv->dev, "%s: ERROR %i registering the device\n",
- __func__, ret);
- goto error_netdev_register;
- }
-
/* If a specific clk_csr value is passed from the platform
* this means that the CSR Clock Range selection cannot be
* changed at run-time and it is fixed. Viceversa the driver'll try to
}
}
- return 0;
+ ret = register_netdev(ndev);
+ if (ret) {
+ netdev_err(priv->dev, "%s: ERROR %i registering the device\n",
+ __func__, ret);
+ goto error_netdev_register;
+ }
+
+ return ret;
-error_mdio_register:
- unregister_netdev(ndev);
error_netdev_register:
+ if (priv->hw->pcs != STMMAC_PCS_RGMII &&
+ priv->hw->pcs != STMMAC_PCS_TBI &&
+ priv->hw->pcs != STMMAC_PCS_RTBI)
+ stmmac_mdio_unregister(ndev);
+error_mdio_register:
netif_napi_del(&priv->napi);
error_hw_init:
clk_disable_unprepare(priv->pclk);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
- u32 value = MII_WRITE | MII_BUSY;
+ u32 value = MII_BUSY;
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
& priv->hw->mii.clk_csr_mask;
if (priv->plat->has_gmac4)
value |= MII_GMAC4_WRITE;
+ else
+ value |= MII_WRITE;
/* Wait until any existing MII operation is complete */
if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
int count;
};
+struct ipvl_skb_cb {
+ bool tx_pkt;
+};
+#define IPVL_SKB_CB(_skb) ((struct ipvl_skb_cb *)&((_skb)->cb[0]))
+
static inline struct ipvl_port *ipvlan_port_get_rcu(const struct net_device *d)
{
return rcu_dereference(d->rx_handler_data);
unsigned int mac_hash;
int ret;
u8 pkt_type;
- bool hlocal, dlocal;
+ bool tx_pkt;
__skb_queue_head_init(&list);
spin_unlock_bh(&port->backlog.lock);
while ((skb = __skb_dequeue(&list)) != NULL) {
+ struct net_device *dev = skb->dev;
+ bool consumed = false;
+
ethh = eth_hdr(skb);
- hlocal = ether_addr_equal(ethh->h_source, port->dev->dev_addr);
+ tx_pkt = IPVL_SKB_CB(skb)->tx_pkt;
mac_hash = ipvlan_mac_hash(ethh->h_dest);
if (ether_addr_equal(ethh->h_dest, port->dev->broadcast))
else
pkt_type = PACKET_MULTICAST;
- dlocal = false;
rcu_read_lock();
list_for_each_entry_rcu(ipvlan, &port->ipvlans, pnode) {
- if (hlocal && (ipvlan->dev == skb->dev)) {
- dlocal = true;
+ if (tx_pkt && (ipvlan->dev == skb->dev))
continue;
- }
if (!test_bit(mac_hash, ipvlan->mac_filters))
continue;
-
+ if (!(ipvlan->dev->flags & IFF_UP))
+ continue;
ret = NET_RX_DROP;
len = skb->len + ETH_HLEN;
nskb = skb_clone(skb, GFP_ATOMIC);
- if (!nskb)
- goto acct;
-
- nskb->pkt_type = pkt_type;
- nskb->dev = ipvlan->dev;
- if (hlocal)
- ret = dev_forward_skb(ipvlan->dev, nskb);
- else
- ret = netif_rx(nskb);
-acct:
+ local_bh_disable();
+ if (nskb) {
+ consumed = true;
+ nskb->pkt_type = pkt_type;
+ nskb->dev = ipvlan->dev;
+ if (tx_pkt)
+ ret = dev_forward_skb(ipvlan->dev, nskb);
+ else
+ ret = netif_rx(nskb);
+ }
ipvlan_count_rx(ipvlan, len, ret == NET_RX_SUCCESS, true);
+ local_bh_enable();
}
rcu_read_unlock();
- if (dlocal) {
+ if (tx_pkt) {
/* If the packet originated here, send it out. */
skb->dev = port->dev;
skb->pkt_type = pkt_type;
dev_queue_xmit(skb);
} else {
- kfree_skb(skb);
+ if (consumed)
+ consume_skb(skb);
+ else
+ kfree_skb(skb);
}
+ if (dev)
+ dev_put(dev);
}
}
}
static void ipvlan_multicast_enqueue(struct ipvl_port *port,
- struct sk_buff *skb)
+ struct sk_buff *skb, bool tx_pkt)
{
if (skb->protocol == htons(ETH_P_PAUSE)) {
kfree_skb(skb);
return;
}
+ /* Record that the deferred packet is from TX or RX path. By
+ * looking at mac-addresses on packet will lead to erronus decisions.
+ * (This would be true for a loopback-mode on master device or a
+ * hair-pin mode of the switch.)
+ */
+ IPVL_SKB_CB(skb)->tx_pkt = tx_pkt;
+
spin_lock(&port->backlog.lock);
if (skb_queue_len(&port->backlog) < IPVLAN_QBACKLOG_LIMIT) {
+ if (skb->dev)
+ dev_hold(skb->dev);
__skb_queue_tail(&port->backlog, skb);
spin_unlock(&port->backlog.lock);
schedule_work(&port->wq);
} else if (is_multicast_ether_addr(eth->h_dest)) {
ipvlan_skb_crossing_ns(skb, NULL);
- ipvlan_multicast_enqueue(ipvlan->port, skb);
+ ipvlan_multicast_enqueue(ipvlan->port, skb, true);
return NET_XMIT_SUCCESS;
}
*/
if (nskb) {
ipvlan_skb_crossing_ns(nskb, NULL);
- ipvlan_multicast_enqueue(port, nskb);
+ ipvlan_multicast_enqueue(port, nskb, false);
}
}
} else {
static void ipvlan_port_destroy(struct net_device *dev)
{
struct ipvl_port *port = ipvlan_port_get_rtnl(dev);
+ struct sk_buff *skb;
dev->priv_flags &= ~IFF_IPVLAN_MASTER;
if (port->mode == IPVLAN_MODE_L3S) {
}
netdev_rx_handler_unregister(dev);
cancel_work_sync(&port->wq);
- __skb_queue_purge(&port->backlog);
+ while ((skb = __skb_dequeue(&port->backlog)) != NULL) {
+ if (skb->dev)
+ dev_put(skb->dev);
+ kfree_skb(skb);
+ }
kfree(port);
}
.probe = usbnet_probe,
.suspend = asix_suspend,
.resume = asix_resume,
+ .reset_resume = asix_resume,
.disconnect = usbnet_disconnect,
.supports_autosuspend = 1,
.disable_hub_initiated_lpm = 1,
*/
need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
if (!ipv6_ndisc_frame(skb) && !need_strict) {
+ vrf_rx_stats(vrf_dev, skb->len);
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
goto out;
}
+ vrf_rx_stats(vrf_dev, skb->len);
+
skb_push(skb, skb->mac_len);
dev_queue_xmit_nit(skb, vrf_dev);
skb_pull(skb, skb->mac_len);
ret = slic_ds26522_init_configure(spi);
if (ret == 0)
- pr_info("DS26522 cs%d configurated\n", spi->chip_select);
+ pr_info("DS26522 cs%d configured\n", spi->chip_select);
return ret;
}
blk_queue_max_hw_sectors(q, ctrl->max_hw_sectors);
blk_queue_max_segments(q, min_t(u32, max_segments, USHRT_MAX));
}
- if (ctrl->stripe_size)
- blk_queue_chunk_sectors(q, ctrl->stripe_size >> 9);
+ if (ctrl->quirks & NVME_QUIRK_STRIPE_SIZE)
+ blk_queue_chunk_sectors(q, ctrl->max_hw_sectors);
blk_queue_virt_boundary(q, ctrl->page_size - 1);
if (ctrl->vwc & NVME_CTRL_VWC_PRESENT)
vwc = true;
ctrl->max_hw_sectors =
min_not_zero(ctrl->max_hw_sectors, max_hw_sectors);
- if ((ctrl->quirks & NVME_QUIRK_STRIPE_SIZE) && id->vs[3]) {
- unsigned int max_hw_sectors;
-
- ctrl->stripe_size = 1 << (id->vs[3] + page_shift);
- max_hw_sectors = ctrl->stripe_size >> (page_shift - 9);
- if (ctrl->max_hw_sectors) {
- ctrl->max_hw_sectors = min(max_hw_sectors,
- ctrl->max_hw_sectors);
- } else {
- ctrl->max_hw_sectors = max_hw_sectors;
- }
- }
-
nvme_set_queue_limits(ctrl, ctrl->admin_q);
ctrl->sgls = le32_to_cpu(id->sgls);
ctrl->kas = le16_to_cpu(id->kas);
nvme_fc_create_hw_io_queues(struct nvme_fc_ctrl *ctrl, u16 qsize)
{
struct nvme_fc_queue *queue = &ctrl->queues[1];
- int i, j, ret;
+ int i, ret;
for (i = 1; i < ctrl->queue_count; i++, queue++) {
ret = __nvme_fc_create_hw_queue(ctrl, queue, i, qsize);
- if (ret) {
- for (j = i-1; j >= 0; j--)
- __nvme_fc_delete_hw_queue(ctrl,
- &ctrl->queues[j], j);
- return ret;
- }
+ if (ret)
+ goto delete_queues;
}
return 0;
+
+delete_queues:
+ for (; i >= 0; i--)
+ __nvme_fc_delete_hw_queue(ctrl, &ctrl->queues[i], i);
+ return ret;
}
static int
WARN_ON_ONCE(!changed);
dev_info(ctrl->ctrl.device,
- "NVME-FC{%d}: new ctrl: NQN \"%s\" (%p)\n",
- ctrl->cnum, ctrl->ctrl.opts->subsysnqn, &ctrl);
+ "NVME-FC{%d}: new ctrl: NQN \"%s\"\n",
+ ctrl->cnum, ctrl->ctrl.opts->subsysnqn);
kref_get(&ctrl->ctrl.kref);
u32 page_size;
u32 max_hw_sectors;
- u32 stripe_size;
u16 oncs;
u16 vid;
atomic_t abort_limit;
req = blk_mq_tag_to_rq(*nvmeq->tags, cqe.command_id);
nvme_req(req)->result = cqe.result;
blk_mq_complete_request(req, le16_to_cpu(cqe.status) >> 1);
-
}
- /* If the controller ignores the cq head doorbell and continuously
- * writes to the queue, it is theoretically possible to wrap around
- * the queue twice and mistakenly return IRQ_NONE. Linux only
- * requires that 0.1% of your interrupts are handled, so this isn't
- * a big problem.
- */
if (head == nvmeq->cq_head && phase == nvmeq->cq_phase)
return;
if (!dev->bar)
goto release;
- return 0;
+ return 0;
release:
- pci_release_mem_regions(pdev);
- return -ENODEV;
+ pci_release_mem_regions(pdev);
+ return -ENODEV;
}
static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return nvme_trans_status_code(hdr, nvme_sc);
}
-static int nvme_trans_start_stop(struct nvme_ns *ns, struct sg_io_hdr *hdr,
- u8 *cmd)
-{
- u8 immed, no_flush;
-
- immed = cmd[1] & 0x01;
- no_flush = cmd[4] & 0x04;
-
- if (immed != 0) {
- return nvme_trans_completion(hdr, SAM_STAT_CHECK_CONDITION,
- ILLEGAL_REQUEST, SCSI_ASC_INVALID_CDB,
- SCSI_ASCQ_CAUSE_NOT_REPORTABLE);
- } else {
- if (no_flush == 0) {
- /* Issue NVME FLUSH command prior to START STOP UNIT */
- int res = nvme_trans_synchronize_cache(ns, hdr);
- if (res)
- return res;
- }
-
- return 0;
- }
-}
-
static int nvme_trans_format_unit(struct nvme_ns *ns, struct sg_io_hdr *hdr,
u8 *cmd)
{
case SECURITY_PROTOCOL_OUT:
retcode = nvme_trans_security_protocol(ns, hdr, cmd);
break;
- case START_STOP:
- retcode = nvme_trans_start_stop(ns, hdr, cmd);
- break;
case SYNCHRONIZE_CACHE:
retcode = nvme_trans_synchronize_cache(ns, hdr);
break;
{
struct nvmet_subsys *subsys = req->sq->ctrl->subsys;
u32 cdw10 = le32_to_cpu(req->cmd->common.cdw10[0]);
- u64 val;
u32 val32;
u16 status = 0;
(subsys->max_qid - 1) | ((subsys->max_qid - 1) << 16));
break;
case NVME_FEAT_KATO:
- val = le64_to_cpu(req->cmd->prop_set.value);
- val32 = val & 0xffff;
+ val32 = le32_to_cpu(req->cmd->common.cdw10[1]);
req->sq->ctrl->kato = DIV_ROUND_UP(val32, 1000);
nvmet_set_result(req, req->sq->ctrl->kato);
break;
rport->lport = nport->lport;
nport->rport = rport;
- return ret ? ret : count;
+ return count;
}
tport->lport = nport->lport;
nport->tport = tport;
- return ret ? ret : count;
+ return count;
}
* @cell: nvmem cell to be read.
* @len: pointer to length of cell which will be populated on successful read.
*
- * Return: ERR_PTR() on error or a valid pointer to a char * buffer on success.
- * The buffer should be freed by the consumer with a kfree().
+ * Return: ERR_PTR() on error or a valid pointer to a buffer on success. The
+ * buffer should be freed by the consumer with a kfree().
*/
void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
{
static const struct of_device_id imx_ocotp_dt_ids[] = {
{ .compatible = "fsl,imx6q-ocotp", (void *)128 },
- { .compatible = "fsl,imx6sl-ocotp", (void *)32 },
+ { .compatible = "fsl,imx6sl-ocotp", (void *)64 },
{ .compatible = "fsl,imx6sx-ocotp", (void *)128 },
{ },
};
unsigned int reg, void *_val, size_t bytes)
{
void __iomem *base = context;
- u32 *val = _val;
- int i = 0, words = bytes / 4;
+ u8 *val = _val;
+ int i = 0, words = bytes;
while (words--)
- *val++ = readl(base + reg + (i++ * 4));
+ *val++ = readb(base + reg + i++);
return 0;
}
unsigned int reg, void *_val, size_t bytes)
{
void __iomem *base = context;
- u32 *val = _val;
- int i = 0, words = bytes / 4;
+ u8 *val = _val;
+ int i = 0, words = bytes;
while (words--)
- writel(*val++, base + reg + (i++ * 4));
+ writeb(*val++, base + reg + i++);
return 0;
}
static struct nvmem_config econfig = {
.name = "qfprom",
.owner = THIS_MODULE,
- .stride = 4,
+ .stride = 1,
.word_size = 1,
.reg_read = qfprom_reg_read,
.reg_write = qfprom_reg_write,
{
struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
- meson_pmx_disable_other_groups(pc, range->pin_base + offset, -1);
+ meson_pmx_disable_other_groups(pc, offset, -1);
return 0;
}
{
int ret = 0;
u32 pin_reg;
- unsigned long flags;
- bool level_trig;
- u32 active_level;
+ unsigned long flags, irq_flags;
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
- /*
- * When level_trig is set EDGE and active_level is set HIGH in BIOS
- * default settings, ignore incoming settings from client and use
- * BIOS settings to configure GPIO register.
+ /* Ignore the settings coming from the client and
+ * read the values from the ACPI tables
+ * while setting the trigger type
*/
- level_trig = !(pin_reg & (LEVEL_TRIGGER << LEVEL_TRIG_OFF));
- active_level = pin_reg & (ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
- if(level_trig &&
- ((active_level >> ACTIVE_LEVEL_OFF) == ACTIVE_HIGH))
- type = IRQ_TYPE_EDGE_FALLING;
+ irq_flags = irq_get_trigger_type(d->irq);
+ if (irq_flags != IRQ_TYPE_NONE)
+ type = irq_flags;
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_RISING:
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
};
+/* Exynos5433 has the 4bit widths for PINCFG_TYPE_DRV bitfields. */
+static const struct samsung_pin_bank_type exynos5433_bank_type_off = {
+ .fld_width = { 4, 1, 2, 4, 2, 2, },
+ .reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
+};
+
+static const struct samsung_pin_bank_type exynos5433_bank_type_alive = {
+ .fld_width = { 4, 1, 2, 4, },
+ .reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
+};
+
static void exynos_irq_mask(struct irq_data *irqd)
{
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
/* pin banks of exynos5433 pin-controller - ALIVE */
static const struct samsung_pin_bank_data exynos5433_pin_banks0[] = {
- EXYNOS_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
- EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
- EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
- EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
- EXYNOS_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
- EXYNOS_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
- EXYNOS_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
- EXYNOS_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
- EXYNOS_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
+ EXYNOS5433_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
+ EXYNOS5433_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
+ EXYNOS5433_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
+ EXYNOS5433_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
+ EXYNOS5433_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
+ EXYNOS5433_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
+ EXYNOS5433_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
+ EXYNOS5433_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
+ EXYNOS5433_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
};
/* pin banks of exynos5433 pin-controller - AUD */
static const struct samsung_pin_bank_data exynos5433_pin_banks1[] = {
- EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
- EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
+ EXYNOS5433_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
+ EXYNOS5433_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
};
/* pin banks of exynos5433 pin-controller - CPIF */
static const struct samsung_pin_bank_data exynos5433_pin_banks2[] = {
- EXYNOS_PIN_BANK_EINTG(2, 0x000, "gpv6", 0x00),
+ EXYNOS5433_PIN_BANK_EINTG(2, 0x000, "gpv6", 0x00),
};
/* pin banks of exynos5433 pin-controller - eSE */
static const struct samsung_pin_bank_data exynos5433_pin_banks3[] = {
- EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj2", 0x00),
+ EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj2", 0x00),
};
/* pin banks of exynos5433 pin-controller - FINGER */
static const struct samsung_pin_bank_data exynos5433_pin_banks4[] = {
- EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpd5", 0x00),
+ EXYNOS5433_PIN_BANK_EINTG(4, 0x000, "gpd5", 0x00),
};
/* pin banks of exynos5433 pin-controller - FSYS */
static const struct samsung_pin_bank_data exynos5433_pin_banks5[] = {
- EXYNOS_PIN_BANK_EINTG(6, 0x000, "gph1", 0x00),
- EXYNOS_PIN_BANK_EINTG(7, 0x020, "gpr4", 0x04),
- EXYNOS_PIN_BANK_EINTG(5, 0x040, "gpr0", 0x08),
- EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr1", 0x0c),
- EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpr2", 0x10),
- EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpr3", 0x14),
+ EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gph1", 0x00),
+ EXYNOS5433_PIN_BANK_EINTG(7, 0x020, "gpr4", 0x04),
+ EXYNOS5433_PIN_BANK_EINTG(5, 0x040, "gpr0", 0x08),
+ EXYNOS5433_PIN_BANK_EINTG(8, 0x060, "gpr1", 0x0c),
+ EXYNOS5433_PIN_BANK_EINTG(2, 0x080, "gpr2", 0x10),
+ EXYNOS5433_PIN_BANK_EINTG(8, 0x0a0, "gpr3", 0x14),
};
/* pin banks of exynos5433 pin-controller - IMEM */
static const struct samsung_pin_bank_data exynos5433_pin_banks6[] = {
- EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpf0", 0x00),
+ EXYNOS5433_PIN_BANK_EINTG(8, 0x000, "gpf0", 0x00),
};
/* pin banks of exynos5433 pin-controller - NFC */
static const struct samsung_pin_bank_data exynos5433_pin_banks7[] = {
- EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
+ EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
};
/* pin banks of exynos5433 pin-controller - PERIC */
static const struct samsung_pin_bank_data exynos5433_pin_banks8[] = {
- EXYNOS_PIN_BANK_EINTG(6, 0x000, "gpv7", 0x00),
- EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpb0", 0x04),
- EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpc0", 0x08),
- EXYNOS_PIN_BANK_EINTG(2, 0x060, "gpc1", 0x0c),
- EXYNOS_PIN_BANK_EINTG(6, 0x080, "gpc2", 0x10),
- EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpc3", 0x14),
- EXYNOS_PIN_BANK_EINTG(2, 0x0c0, "gpg0", 0x18),
- EXYNOS_PIN_BANK_EINTG(4, 0x0e0, "gpd0", 0x1c),
- EXYNOS_PIN_BANK_EINTG(6, 0x100, "gpd1", 0x20),
- EXYNOS_PIN_BANK_EINTG(8, 0x120, "gpd2", 0x24),
- EXYNOS_PIN_BANK_EINTG(5, 0x140, "gpd4", 0x28),
- EXYNOS_PIN_BANK_EINTG(2, 0x160, "gpd8", 0x2c),
- EXYNOS_PIN_BANK_EINTG(7, 0x180, "gpd6", 0x30),
- EXYNOS_PIN_BANK_EINTG(3, 0x1a0, "gpd7", 0x34),
- EXYNOS_PIN_BANK_EINTG(5, 0x1c0, "gpg1", 0x38),
- EXYNOS_PIN_BANK_EINTG(2, 0x1e0, "gpg2", 0x3c),
- EXYNOS_PIN_BANK_EINTG(8, 0x200, "gpg3", 0x40),
+ EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gpv7", 0x00),
+ EXYNOS5433_PIN_BANK_EINTG(5, 0x020, "gpb0", 0x04),
+ EXYNOS5433_PIN_BANK_EINTG(8, 0x040, "gpc0", 0x08),
+ EXYNOS5433_PIN_BANK_EINTG(2, 0x060, "gpc1", 0x0c),
+ EXYNOS5433_PIN_BANK_EINTG(6, 0x080, "gpc2", 0x10),
+ EXYNOS5433_PIN_BANK_EINTG(8, 0x0a0, "gpc3", 0x14),
+ EXYNOS5433_PIN_BANK_EINTG(2, 0x0c0, "gpg0", 0x18),
+ EXYNOS5433_PIN_BANK_EINTG(4, 0x0e0, "gpd0", 0x1c),
+ EXYNOS5433_PIN_BANK_EINTG(6, 0x100, "gpd1", 0x20),
+ EXYNOS5433_PIN_BANK_EINTG(8, 0x120, "gpd2", 0x24),
+ EXYNOS5433_PIN_BANK_EINTG(5, 0x140, "gpd4", 0x28),
+ EXYNOS5433_PIN_BANK_EINTG(2, 0x160, "gpd8", 0x2c),
+ EXYNOS5433_PIN_BANK_EINTG(7, 0x180, "gpd6", 0x30),
+ EXYNOS5433_PIN_BANK_EINTG(3, 0x1a0, "gpd7", 0x34),
+ EXYNOS5433_PIN_BANK_EINTG(5, 0x1c0, "gpg1", 0x38),
+ EXYNOS5433_PIN_BANK_EINTG(2, 0x1e0, "gpg2", 0x3c),
+ EXYNOS5433_PIN_BANK_EINTG(8, 0x200, "gpg3", 0x40),
};
/* pin banks of exynos5433 pin-controller - TOUCH */
static const struct samsung_pin_bank_data exynos5433_pin_banks9[] = {
- EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
+ EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
};
/*
.pctl_res_idx = pctl_idx, \
} \
+#define EXYNOS5433_PIN_BANK_EINTG(pins, reg, id, offs) \
+ { \
+ .type = &exynos5433_bank_type_off, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_GPIO, \
+ .eint_offset = offs, \
+ .name = id \
+ }
+
+#define EXYNOS5433_PIN_BANK_EINTW(pins, reg, id, offs) \
+ { \
+ .type = &exynos5433_bank_type_alive, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_WKUP, \
+ .eint_offset = offs, \
+ .name = id \
+ }
+
+#define EXYNOS5433_PIN_BANK_EINTW_EXT(pins, reg, id, offs, pctl_idx) \
+ { \
+ .type = &exynos5433_bank_type_alive, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_WKUP, \
+ .eint_offset = offs, \
+ .name = id, \
+ .pctl_res_idx = pctl_idx, \
+ } \
+
/**
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* generated by the external wakeup interrupt controller.
config SURFACE_3_BUTTON
tristate "Power/home/volume buttons driver for Microsoft Surface 3 tablet"
- depends on ACPI && KEYBOARD_GPIO
+ depends on ACPI && KEYBOARD_GPIO && I2C
---help---
This driver handles the power/home/volume buttons on the Microsoft Surface 3 tablet.
#if IS_ENABLED(CONFIG_LEDS_CLASS)
static enum led_brightness logolamp_get(struct led_classdev *cdev);
-static void logolamp_set(struct led_classdev *cdev,
+static int logolamp_set(struct led_classdev *cdev,
enum led_brightness brightness);
static struct led_classdev logolamp_led = {
.name = "fujitsu::logolamp",
.brightness_get = logolamp_get,
- .brightness_set = logolamp_set
+ .brightness_set_blocking = logolamp_set
};
static enum led_brightness kblamps_get(struct led_classdev *cdev);
-static void kblamps_set(struct led_classdev *cdev,
+static int kblamps_set(struct led_classdev *cdev,
enum led_brightness brightness);
static struct led_classdev kblamps_led = {
.name = "fujitsu::kblamps",
.brightness_get = kblamps_get,
- .brightness_set = kblamps_set
+ .brightness_set_blocking = kblamps_set
};
static enum led_brightness radio_led_get(struct led_classdev *cdev);
-static void radio_led_set(struct led_classdev *cdev,
+static int radio_led_set(struct led_classdev *cdev,
enum led_brightness brightness);
static struct led_classdev radio_led = {
.name = "fujitsu::radio_led",
.brightness_get = radio_led_get,
- .brightness_set = radio_led_set
+ .brightness_set_blocking = radio_led_set
};
static enum led_brightness eco_led_get(struct led_classdev *cdev);
-static void eco_led_set(struct led_classdev *cdev,
+static int eco_led_set(struct led_classdev *cdev,
enum led_brightness brightness);
static struct led_classdev eco_led = {
.name = "fujitsu::eco_led",
.brightness_get = eco_led_get,
- .brightness_set = eco_led_set
+ .brightness_set_blocking = eco_led_set
};
#endif
#if IS_ENABLED(CONFIG_LEDS_CLASS)
/* LED class callbacks */
-static void logolamp_set(struct led_classdev *cdev,
+static int logolamp_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
if (brightness >= LED_FULL) {
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_ON);
- call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_ON);
+ return call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_ON);
} else if (brightness >= LED_HALF) {
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_ON);
- call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_OFF);
+ return call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_OFF);
} else {
- call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_OFF);
+ return call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_OFF);
}
}
-static void kblamps_set(struct led_classdev *cdev,
+static int kblamps_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
if (brightness >= LED_FULL)
- call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_ON);
+ return call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_ON);
else
- call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_OFF);
+ return call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_OFF);
}
-static void radio_led_set(struct led_classdev *cdev,
+static int radio_led_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
if (brightness >= LED_FULL)
- call_fext_func(FUNC_RFKILL, 0x5, RADIO_LED_ON, RADIO_LED_ON);
+ return call_fext_func(FUNC_RFKILL, 0x5, RADIO_LED_ON, RADIO_LED_ON);
else
- call_fext_func(FUNC_RFKILL, 0x5, RADIO_LED_ON, 0x0);
+ return call_fext_func(FUNC_RFKILL, 0x5, RADIO_LED_ON, 0x0);
}
-static void eco_led_set(struct led_classdev *cdev,
+static int eco_led_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
int curr;
curr = call_fext_func(FUNC_LEDS, 0x2, ECO_LED, 0x0);
if (brightness >= LED_FULL)
- call_fext_func(FUNC_LEDS, 0x1, ECO_LED, curr | ECO_LED_ON);
+ return call_fext_func(FUNC_LEDS, 0x1, ECO_LED, curr | ECO_LED_ON);
else
- call_fext_func(FUNC_LEDS, 0x1, ECO_LED, curr & ~ECO_LED_ON);
+ return call_fext_func(FUNC_LEDS, 0x1, ECO_LED, curr & ~ECO_LED_ON);
}
static enum led_brightness logolamp_get(struct led_classdev *cdev)
/* Initialize the device private structure. */
struct octeon_ethernet *priv = netdev_priv(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
dev->netdev_ops = &cvm_oct_pow_netdev_ops;
priv->imode = CVMX_HELPER_INTERFACE_MODE_DISABLED;
priv->port = CVMX_PIP_NUM_INPUT_PORTS;
}
/* Initialize the device private structure. */
+ SET_NETDEV_DEV(dev, &pdev->dev);
priv = netdev_priv(dev);
priv->netdev = dev;
priv->of_node = cvm_oct_node_for_port(pip, interface,
if (ifp->desc.bNumEndpoints >= num_ep)
goto skip_to_next_endpoint_or_interface_descriptor;
+ /* Check for duplicate endpoint addresses */
+ for (i = 0; i < ifp->desc.bNumEndpoints; ++i) {
+ if (ifp->endpoint[i].desc.bEndpointAddress ==
+ d->bEndpointAddress) {
+ dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
+ goto skip_to_next_endpoint_or_interface_descriptor;
+ }
+ }
+
endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
++ifp->desc.bNumEndpoints;
static void hub_release(struct kref *kref);
static int usb_reset_and_verify_device(struct usb_device *udev);
-static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
- struct usb_port *port_dev);
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
static inline char *portspeed(struct usb_hub *hub, int portstatus)
{
USB_PORT_FEAT_LINK_STATE);
}
-/*
- * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
- * a connection with a plugged-in cable but will signal the host when the cable
- * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
- */
-static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
-{
- struct usb_port *port_dev = hub->ports[port1 - 1];
- struct usb_device *hdev = hub->hdev;
- int ret = 0;
-
- if (!hub->error) {
- if (hub_is_superspeed(hub->hdev)) {
- hub_usb3_port_prepare_disable(hub, port_dev);
- ret = hub_set_port_link_state(hub, port_dev->portnum,
- USB_SS_PORT_LS_U3);
- } else {
- ret = usb_clear_port_feature(hdev, port1,
- USB_PORT_FEAT_ENABLE);
- }
- }
- if (port_dev->child && set_state)
- usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
- if (ret && ret != -ENODEV)
- dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
- return ret;
-}
-
/*
* Disable a port and mark a logical connect-change event, so that some
* time later hub_wq will disconnect() any existing usb_device on the port
#endif /* CONFIG_PM */
+/*
+ * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
+ * a connection with a plugged-in cable but will signal the host when the cable
+ * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
+ */
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *hdev = hub->hdev;
+ int ret = 0;
+
+ if (!hub->error) {
+ if (hub_is_superspeed(hub->hdev)) {
+ hub_usb3_port_prepare_disable(hub, port_dev);
+ ret = hub_set_port_link_state(hub, port_dev->portnum,
+ USB_SS_PORT_LS_U3);
+ } else {
+ ret = usb_clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_ENABLE);
+ }
+ }
+ if (port_dev->child && set_state)
+ usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
+ if (ret && ret != -ENODEV)
+ dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
+ return ret;
+}
+
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
hs_ep->desc_list = dma_alloc_coherent(hsotg->dev,
MAX_DMA_DESC_NUM_GENERIC *
sizeof(struct dwc2_dma_desc),
- &hs_ep->desc_list_dma, GFP_KERNEL);
+ &hs_ep->desc_list_dma, GFP_ATOMIC);
if (!hs_ep->desc_list) {
ret = -ENOMEM;
goto error2;
static void dwc2_get_device_property(struct dwc2_hsotg *hsotg,
char *property, u8 size, u64 *value)
{
- u8 val8;
- u16 val16;
u32 val32;
switch (size) {
*value = device_property_read_bool(hsotg->dev, property);
break;
case 1:
- if (device_property_read_u8(hsotg->dev, property, &val8))
- return;
-
- *value = val8;
- break;
case 2:
- if (device_property_read_u16(hsotg->dev, property, &val16))
- return;
-
- *value = val16;
- break;
case 4:
if (device_property_read_u32(hsotg->dev, property, &val32))
return;
/* Buffer DMA */
dwc2_set_param_bool(hsotg, &p->g_dma,
false, "gadget-dma",
- true, false,
+ dma_capable, false,
dma_capable);
/* DMA Descriptor */
dwc2_set_param_bool(hsotg, &p->g_dma_desc, false,
"gadget-dma-desc",
- p->g_dma, false,
+ !!hw->dma_desc_enable, false,
!!hw->dma_desc_enable);
}
dwc2_set_param_bool(hsotg, &p->host_dma,
false, "host-dma",
- true, false,
+ dma_capable, false,
dma_capable);
+ dwc2_set_param_host_rx_fifo_size(hsotg,
+ params->host_rx_fifo_size);
+ dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
+ params->host_nperio_tx_fifo_size);
+ dwc2_set_param_host_perio_tx_fifo_size(hsotg,
+ params->host_perio_tx_fifo_size);
}
dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable);
dwc2_set_param_dma_desc_fs_enable(hsotg, params->dma_desc_fs_enable);
params->host_support_fs_ls_low_power);
dwc2_set_param_enable_dynamic_fifo(hsotg,
params->enable_dynamic_fifo);
- dwc2_set_param_host_rx_fifo_size(hsotg,
- params->host_rx_fifo_size);
- dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
- params->host_nperio_tx_fifo_size);
- dwc2_set_param_host_perio_tx_fifo_size(hsotg,
- params->host_perio_tx_fifo_size);
dwc2_set_param_max_transfer_size(hsotg,
params->max_transfer_size);
dwc2_set_param_max_packet_count(hsotg,
#define DWC3_XHCI_RESOURCES_NUM 2
#define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */
-#define DWC3_EVENT_SIZE 4 /* bytes */
-#define DWC3_EVENT_MAX_NUM 64 /* 2 events/endpoint */
-#define DWC3_EVENT_BUFFERS_SIZE (DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
+#define DWC3_EVENT_BUFFERS_SIZE 4096
#define DWC3_EVENT_TYPE_MASK 0xfe
#define DWC3_EVENT_TYPE_DEV 0
#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DCFG_SUPERSPEED (4 << 0)
#define DWC3_DCFG_HIGHSPEED (0 << 0)
-#define DWC3_DCFG_FULLSPEED2 (1 << 0)
+#define DWC3_DCFG_FULLSPEED (1 << 0)
#define DWC3_DCFG_LOWSPEED (2 << 0)
-#define DWC3_DCFG_FULLSPEED1 (3 << 0)
#define DWC3_DCFG_NUMP_SHIFT 17
#define DWC3_DCFG_NUMP(n) (((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DSTS_SUPERSPEED (4 << 0)
#define DWC3_DSTS_HIGHSPEED (0 << 0)
-#define DWC3_DSTS_FULLSPEED2 (1 << 0)
+#define DWC3_DSTS_FULLSPEED (1 << 0)
#define DWC3_DSTS_LOWSPEED (2 << 0)
-#define DWC3_DSTS_FULLSPEED1 (3 << 0)
/* Device Generic Command Register */
#define DWC3_DGCMD_SET_LMP 0x01
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dwc3-omap.h>
/* check the DMA Status */
reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
-
+ irq_set_status_flags(omap->irq, IRQ_NOAUTOEN);
ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
dwc3_omap_interrupt_thread, IRQF_SHARED,
"dwc3-omap", omap);
}
dwc3_omap_enable_irqs(omap);
-
+ enable_irq(omap->irq);
return 0;
err2:
extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
dwc3_omap_disable_irqs(omap);
+ disable_irq(omap->irq);
of_platform_depopulate(omap->dev);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
#define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0
+#define PCI_DEVICE_ID_INTEL_GLK 0x31aa
#define PCI_INTEL_BXT_DSM_UUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
{
struct platform_device *dwc3 = dwc->dwc3;
struct pci_dev *pdev = dwc->pci;
- int ret;
-
- struct property_entry sysdev_property[] = {
- PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
- { },
- };
-
- ret = platform_device_add_properties(dwc3, sysdev_property);
- if (ret)
- return ret;
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{ },
};
int ret;
struct property_entry properties[] = {
- PROPERTY_ENTRY_STRING("dr-mode", "peripheral"),
+ PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{ }
};
PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{ },
};
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
struct dwc3_ep *dep, struct dwc3_request *req);
-static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
- u32 len, u32 type, bool chain)
+static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum,
+ dma_addr_t buf_dma, u32 len, u32 type, bool chain)
{
- struct dwc3_gadget_ep_cmd_params params;
struct dwc3_trb *trb;
struct dwc3_ep *dep;
- int ret;
-
dep = dwc->eps[epnum];
- if (dep->flags & DWC3_EP_BUSY)
- return 0;
trb = &dwc->ep0_trb[dep->trb_enqueue];
trb->ctrl |= (DWC3_TRB_CTRL_IOC
| DWC3_TRB_CTRL_LST);
- if (chain)
+ trace_dwc3_prepare_trb(dep, trb);
+}
+
+static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum)
+{
+ struct dwc3_gadget_ep_cmd_params params;
+ struct dwc3_ep *dep;
+ int ret;
+
+ dep = dwc->eps[epnum];
+ if (dep->flags & DWC3_EP_BUSY)
return 0;
memset(¶ms, 0, sizeof(params));
params.param0 = upper_32_bits(dwc->ep0_trb_addr);
params.param1 = lower_32_bits(dwc->ep0_trb_addr);
- trace_dwc3_prepare_trb(dep, trb);
-
ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, ¶ms);
if (ret < 0)
return ret;
complete(&dwc->ep0_in_setup);
- ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
+ dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8,
DWC3_TRBCTL_CONTROL_SETUP, false);
+ ret = dwc3_ep0_start_trans(dwc, 0);
WARN_ON(ret < 0);
}
dwc->ep0_next_event = DWC3_EP0_COMPLETE;
- ret = dwc3_ep0_start_trans(dwc, epnum,
- dwc->ctrl_req_addr, 0,
- DWC3_TRBCTL_CONTROL_DATA, false);
+ dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr,
+ 0, DWC3_TRBCTL_CONTROL_DATA, false);
+ ret = dwc3_ep0_start_trans(dwc, epnum);
WARN_ON(ret < 0);
}
}
req->direction = !!dep->number;
if (req->request.length == 0) {
- ret = dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
dwc->ctrl_req_addr, 0,
DWC3_TRBCTL_CONTROL_DATA, false);
+ ret = dwc3_ep0_start_trans(dwc, dep->number);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
&& (dep->number == 0)) {
u32 transfer_size = 0;
if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
transfer_size = ALIGN(req->request.length - maxpacket,
maxpacket);
- ret = dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
req->request.dma,
transfer_size,
DWC3_TRBCTL_CONTROL_DATA,
dwc->ep0_bounced = true;
- ret = dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
dwc->ep0_bounce_addr, transfer_size,
DWC3_TRBCTL_CONTROL_DATA, false);
+ ret = dwc3_ep0_start_trans(dwc, dep->number);
} else {
ret = usb_gadget_map_request_by_dev(dwc->sysdev,
&req->request, dep->number);
if (ret)
return;
- ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma,
req->request.length, DWC3_TRBCTL_CONTROL_DATA,
false);
+ ret = dwc3_ep0_start_trans(dwc, dep->number);
}
WARN_ON(ret < 0);
type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
: DWC3_TRBCTL_CONTROL_STATUS2;
- return dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
dwc->ctrl_req_addr, 0, type, false);
+ return dwc3_ep0_start_trans(dwc, dep->number);
}
static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
if (req->request.status == -EINPROGRESS)
req->request.status = status;
- if (dwc->ep0_bounced && dep->number == 0)
+ if (dwc->ep0_bounced && dep->number <= 1)
dwc->ep0_bounced = false;
- else
- usb_gadget_unmap_request_by_dev(dwc->sysdev,
- &req->request, req->direction);
+
+ usb_gadget_unmap_request_by_dev(dwc->sysdev,
+ &req->request, req->direction);
trace_dwc3_gadget_giveback(req);
reg |= DWC3_DCFG_LOWSPEED;
break;
case USB_SPEED_FULL:
- reg |= DWC3_DCFG_FULLSPEED1;
+ reg |= DWC3_DCFG_FULLSPEED;
break;
case USB_SPEED_HIGH:
reg |= DWC3_DCFG_HIGHSPEED;
dep = dwc->eps[epnum];
- if (!(dep->flags & DWC3_EP_ENABLED) &&
- !(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
- return;
+ if (!(dep->flags & DWC3_EP_ENABLED)) {
+ if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+ return;
+
+ /* Handle only EPCMDCMPLT when EP disabled */
+ if (event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT)
+ return;
+ }
if (epnum == 0 || epnum == 1) {
dwc3_ep0_interrupt(dwc, event);
dwc->gadget.ep0->maxpacket = 64;
dwc->gadget.speed = USB_SPEED_HIGH;
break;
- case DWC3_DSTS_FULLSPEED2:
- case DWC3_DSTS_FULLSPEED1:
+ case DWC3_DSTS_FULLSPEED:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
dwc->gadget.ep0->maxpacket = 64;
dwc->gadget.speed = USB_SPEED_FULL;
value = min(w_length, (u16) 1);
break;
- /* function drivers must handle get/set altsetting; if there's
- * no get() method, we know only altsetting zero works.
- */
+ /* function drivers must handle get/set altsetting */
case USB_REQ_SET_INTERFACE:
if (ctrl->bRequestType != USB_RECIP_INTERFACE)
goto unknown;
f = cdev->config->interface[intf];
if (!f)
break;
- if (w_value && !f->set_alt)
+
+ /*
+ * If there's no get_alt() method, we know only altsetting zero
+ * works. There is no need to check if set_alt() is not NULL
+ * as we check this in usb_add_function().
+ */
+ if (w_value && !f->get_alt)
break;
value = f->set_alt(f, w_index, w_value);
if (value == USB_GADGET_DELAYED_STATUS) {
case FFS_STRING:
/*
- * Strings are indexed from 1 (0 is magic ;) reserved
- * for languages list or some such)
+ * Strings are indexed from 1 (0 is reserved
+ * for languages list)
*/
if (*valuep > helper->ffs->strings_count)
helper->ffs->strings_count = *valuep;
if (len < sizeof(*d) ||
d->bFirstInterfaceNumber >= ffs->interfaces_count ||
- !d->Reserved1)
+ d->Reserved1)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i)
if (d->Reserved2[i])
{
struct ffs_dev *ffs_obj;
struct f_fs_opts *opts;
+ struct config_item *ci;
ENTER();
ffs_dev_lock();
|| !atomic_read(&opts->func_inst.group.cg_item.ci_kref.refcount))
goto done;
- unregister_gadget_item(ffs_obj->opts->
- func_inst.group.cg_item.ci_parent->ci_parent);
+ ci = opts->func_inst.group.cg_item.ci_parent->ci_parent;
+ ffs_dev_unlock();
+
+ unregister_gadget_item(ci);
+ return;
done:
ffs_dev_unlock();
}
}
status = usb_ep_enable(hidg->out_ep);
if (status < 0) {
- ERROR(cdev, "Enable IN endpoint FAILED!\n");
+ ERROR(cdev, "Enable OUT endpoint FAILED!\n");
goto fail;
}
hidg->out_ep->driver_data = hidg;
/* data and/or status stage for control request */
} else if (dev->state == STATE_DEV_SETUP) {
- /* IN DATA+STATUS caller makes len <= wLength */
+ len = min_t(size_t, len, dev->setup_wLength);
if (dev->setup_in) {
retval = setup_req (dev->gadget->ep0, dev->req, len);
if (retval == 0) {
* such as configuration notifications.
*/
-static int is_valid_config (struct usb_config_descriptor *config)
+static int is_valid_config(struct usb_config_descriptor *config,
+ unsigned int total)
{
return config->bDescriptorType == USB_DT_CONFIG
&& config->bLength == USB_DT_CONFIG_SIZE
+ && total >= USB_DT_CONFIG_SIZE
&& config->bConfigurationValue != 0
&& (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0
&& (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0;
}
spin_unlock_irq(&dev->lock);
- if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4))
+ if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) ||
+ (len > PAGE_SIZE * 4))
return -EINVAL;
/* we might need to change message format someday */
/* full or low speed config */
dev->config = (void *) kbuf;
total = le16_to_cpu(dev->config->wTotalLength);
- if (!is_valid_config (dev->config) || total >= length)
+ if (!is_valid_config(dev->config, total) ||
+ total > length - USB_DT_DEVICE_SIZE)
goto fail;
kbuf += total;
length -= total;
if (kbuf [1] == USB_DT_CONFIG) {
dev->hs_config = (void *) kbuf;
total = le16_to_cpu(dev->hs_config->wTotalLength);
- if (!is_valid_config (dev->hs_config) || total >= length)
+ if (!is_valid_config(dev->hs_config, total) ||
+ total > length - USB_DT_DEVICE_SIZE)
goto fail;
kbuf += total;
length -= total;
+ } else {
+ dev->hs_config = NULL;
}
/* could support multiple configs, using another encoding! */
|| dev->dev->bDescriptorType != USB_DT_DEVICE
|| dev->dev->bNumConfigurations != 1)
goto fail;
- dev->dev->bNumConfigurations = 1;
dev->dev->bcdUSB = cpu_to_le16 (0x0200);
/* triggers gadgetfs_bind(); then we can enumerate. */
if (!ret)
break;
}
- if (!ret && !udc->driver)
+ if (ret)
+ ret = -ENODEV;
+ else if (udc->driver)
+ ret = -EBUSY;
+ else
goto found;
} else {
list_for_each_entry(udc, &udc_list, list) {
/* caller must hold lock */
static void stop_activity(struct dummy *dum)
{
- struct dummy_ep *ep;
+ int i;
/* prevent any more requests */
dum->address = 0;
/* The timer is left running so that outstanding URBs can fail */
/* nuke any pending requests first, so driver i/o is quiesced */
- list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list)
- nuke(dum, ep);
+ for (i = 0; i < DUMMY_ENDPOINTS; ++i)
+ nuke(dum, &dum->ep[i]);
/* driver now does any non-usb quiescing necessary */
}
struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
u8 ports; /* number of ports on root hub */
u8 overcurrent_supported;
- u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
u8 overcurrent_status[AT91_MAX_USBH_PORTS];
u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
};
if (!valid_port(port))
return;
- gpiod_set_value(pdata->vbus_pin[port],
- pdata->vbus_pin_active_low[port] ^ enable);
+ gpiod_set_value(pdata->vbus_pin[port], enable);
}
static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
if (!valid_port(port))
return -EINVAL;
- return gpiod_get_value(pdata->vbus_pin[port]) ^
- pdata->vbus_pin_active_low[port];
+ return gpiod_get_value(pdata->vbus_pin[port]);
}
/*
pdata->ports = ports;
at91_for_each_port(i) {
- pdata->vbus_pin[i] = devm_gpiod_get_optional(&pdev->dev,
- "atmel,vbus-gpio",
- GPIOD_IN);
+ if (i >= pdata->ports)
+ break;
+
+ pdata->vbus_pin[i] =
+ devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
+ i, GPIOD_OUT_HIGH);
if (IS_ERR(pdata->vbus_pin[i])) {
err = PTR_ERR(pdata->vbus_pin[i]);
dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
continue;
}
-
- pdata->vbus_pin_active_low[i] = gpiod_get_value(pdata->vbus_pin[i]);
-
- ohci_at91_usb_set_power(pdata, i, 1);
}
at91_for_each_port(i) {
break;
pdata->overcurrent_pin[i] =
- devm_gpiod_get_optional(&pdev->dev,
- "atmel,oc-gpio", GPIOD_IN);
+ devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
+ i, GPIOD_IN);
if (IS_ERR(pdata->overcurrent_pin[i])) {
err = PTR_ERR(pdata->overcurrent_pin[i]);
dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
xhci->devs[slot_id] = NULL;
}
+/*
+ * Free a virt_device structure.
+ * If the virt_device added a tt_info (a hub) and has children pointing to
+ * that tt_info, then free the child first. Recursive.
+ * We can't rely on udev at this point to find child-parent relationships.
+ */
+void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id)
+{
+ struct xhci_virt_device *vdev;
+ struct list_head *tt_list_head;
+ struct xhci_tt_bw_info *tt_info, *next;
+ int i;
+
+ vdev = xhci->devs[slot_id];
+ if (!vdev)
+ return;
+
+ tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts);
+ list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+ /* is this a hub device that added a tt_info to the tts list */
+ if (tt_info->slot_id == slot_id) {
+ /* are any devices using this tt_info? */
+ for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
+ vdev = xhci->devs[i];
+ if (vdev && (vdev->tt_info == tt_info))
+ xhci_free_virt_devices_depth_first(
+ xhci, i);
+ }
+ }
+ }
+ /* we are now at a leaf device */
+ xhci_free_virt_device(xhci, slot_id);
+}
+
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
struct usb_device *udev, gfp_t flags)
{
int size;
int i, j, num_ports;
- del_timer_sync(&xhci->cmd_timer);
+ cancel_delayed_work_sync(&xhci->cmd_timer);
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
}
}
- for (i = 1; i < MAX_HC_SLOTS; ++i)
- xhci_free_virt_device(xhci, i);
+ for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--)
+ xhci_free_virt_devices_depth_first(xhci, i);
dma_pool_destroy(xhci->segment_pool);
xhci->segment_pool = NULL;
INIT_LIST_HEAD(&xhci->cmd_list);
- /* init command timeout timer */
- setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
- (unsigned long)xhci);
+ /* init command timeout work */
+ INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout);
+ init_completion(&xhci->cmd_ring_stop_completion);
page_size = readl(&xhci->op_regs->page_size);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
goto disable_ldos;
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ if (irq < 0) {
+ ret = irq;
goto disable_clk;
+ }
/* Initialize dma_mask and coherent_dma_mask to 32-bits */
ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) {
+ pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) {
xhci->quirks |= XHCI_PME_STUCK_QUIRK;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
readl(&xhci->dba->doorbell[0]);
}
-static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
+static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay)
+{
+ return mod_delayed_work(system_wq, &xhci->cmd_timer, delay);
+}
+
+static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
+{
+ return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command,
+ cmd_list);
+}
+
+/*
+ * Turn all commands on command ring with status set to "aborted" to no-op trbs.
+ * If there are other commands waiting then restart the ring and kick the timer.
+ * This must be called with command ring stopped and xhci->lock held.
+ */
+static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
+ struct xhci_command *cur_cmd)
+{
+ struct xhci_command *i_cmd;
+ u32 cycle_state;
+
+ /* Turn all aborted commands in list to no-ops, then restart */
+ list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) {
+
+ if (i_cmd->status != COMP_CMD_ABORT)
+ continue;
+
+ i_cmd->status = COMP_CMD_STOP;
+
+ xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
+ i_cmd->command_trb);
+ /* get cycle state from the original cmd trb */
+ cycle_state = le32_to_cpu(
+ i_cmd->command_trb->generic.field[3]) & TRB_CYCLE;
+ /* modify the command trb to no-op command */
+ i_cmd->command_trb->generic.field[0] = 0;
+ i_cmd->command_trb->generic.field[1] = 0;
+ i_cmd->command_trb->generic.field[2] = 0;
+ i_cmd->command_trb->generic.field[3] = cpu_to_le32(
+ TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
+
+ /*
+ * caller waiting for completion is called when command
+ * completion event is received for these no-op commands
+ */
+ }
+
+ xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+ /* ring command ring doorbell to restart the command ring */
+ if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
+ !(xhci->xhc_state & XHCI_STATE_DYING)) {
+ xhci->current_cmd = cur_cmd;
+ xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_ring_cmd_db(xhci);
+ }
+}
+
+/* Must be called with xhci->lock held, releases and aquires lock back */
+static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
{
u64 temp_64;
int ret;
xhci_dbg(xhci, "Abort command ring\n");
- temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
- xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
+ reinit_completion(&xhci->cmd_ring_stop_completion);
- /*
- * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
- * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
- * but the completion event in never sent. Use the cmd timeout timer to
- * handle those cases. Use twice the time to cover the bit polling retry
- */
- mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT));
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
&xhci->op_regs->cmd_ring);
udelay(1000);
ret = xhci_handshake(&xhci->op_regs->cmd_ring,
CMD_RING_RUNNING, 0, 3 * 1000 * 1000);
- if (ret == 0)
- return 0;
-
- xhci_err(xhci, "Stopped the command ring failed, "
- "maybe the host is dead\n");
- del_timer(&xhci->cmd_timer);
- xhci->xhc_state |= XHCI_STATE_DYING;
- xhci_halt(xhci);
- return -ESHUTDOWN;
+ if (ret < 0) {
+ xhci_err(xhci, "Stopped the command ring failed, "
+ "maybe the host is dead\n");
+ xhci->xhc_state |= XHCI_STATE_DYING;
+ xhci_halt(xhci);
+ return -ESHUTDOWN;
+ }
+ }
+ /*
+ * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
+ * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
+ * but the completion event in never sent. Wait 2 secs (arbitrary
+ * number) to handle those cases after negation of CMD_RING_RUNNING.
+ */
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion,
+ msecs_to_jiffies(2000));
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!ret) {
+ xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");
+ xhci_cleanup_command_queue(xhci);
+ } else {
+ xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci));
}
-
return 0;
}
xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT);
}
-/*
- * Turn all commands on command ring with status set to "aborted" to no-op trbs.
- * If there are other commands waiting then restart the ring and kick the timer.
- * This must be called with command ring stopped and xhci->lock held.
- */
-static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
- struct xhci_command *cur_cmd)
-{
- struct xhci_command *i_cmd, *tmp_cmd;
- u32 cycle_state;
-
- /* Turn all aborted commands in list to no-ops, then restart */
- list_for_each_entry_safe(i_cmd, tmp_cmd, &xhci->cmd_list,
- cmd_list) {
-
- if (i_cmd->status != COMP_CMD_ABORT)
- continue;
-
- i_cmd->status = COMP_CMD_STOP;
-
- xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
- i_cmd->command_trb);
- /* get cycle state from the original cmd trb */
- cycle_state = le32_to_cpu(
- i_cmd->command_trb->generic.field[3]) & TRB_CYCLE;
- /* modify the command trb to no-op command */
- i_cmd->command_trb->generic.field[0] = 0;
- i_cmd->command_trb->generic.field[1] = 0;
- i_cmd->command_trb->generic.field[2] = 0;
- i_cmd->command_trb->generic.field[3] = cpu_to_le32(
- TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
-
- /*
- * caller waiting for completion is called when command
- * completion event is received for these no-op commands
- */
- }
-
- xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-
- /* ring command ring doorbell to restart the command ring */
- if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
- !(xhci->xhc_state & XHCI_STATE_DYING)) {
- xhci->current_cmd = cur_cmd;
- mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
- xhci_ring_cmd_db(xhci);
- }
- return;
-}
-
-
-void xhci_handle_command_timeout(unsigned long data)
+void xhci_handle_command_timeout(struct work_struct *work)
{
struct xhci_hcd *xhci;
int ret;
unsigned long flags;
u64 hw_ring_state;
- bool second_timeout = false;
- xhci = (struct xhci_hcd *) data;
- /* mark this command to be cancelled */
+ xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer);
+
spin_lock_irqsave(&xhci->lock, flags);
- if (xhci->current_cmd) {
- if (xhci->current_cmd->status == COMP_CMD_ABORT)
- second_timeout = true;
- xhci->current_cmd->status = COMP_CMD_ABORT;
+
+ /*
+ * If timeout work is pending, or current_cmd is NULL, it means we
+ * raced with command completion. Command is handled so just return.
+ */
+ if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
}
+ /* mark this command to be cancelled */
+ xhci->current_cmd->status = COMP_CMD_ABORT;
/* Make sure command ring is running before aborting it */
hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
(hw_ring_state & CMD_RING_RUNNING)) {
- spin_unlock_irqrestore(&xhci->lock, flags);
+ /* Prevent new doorbell, and start command abort */
+ xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
xhci_dbg(xhci, "Command timeout\n");
- ret = xhci_abort_cmd_ring(xhci);
+ ret = xhci_abort_cmd_ring(xhci, flags);
if (unlikely(ret == -ESHUTDOWN)) {
xhci_err(xhci, "Abort command ring failed\n");
xhci_cleanup_command_queue(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
xhci_dbg(xhci, "xHCI host controller is dead.\n");
+
+ return;
}
- return;
+
+ goto time_out_completed;
}
- /* command ring failed to restart, or host removed. Bail out */
- if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) {
- spin_unlock_irqrestore(&xhci->lock, flags);
- xhci_dbg(xhci, "command timed out twice, ring start fail?\n");
+ /* host removed. Bail out */
+ if (xhci->xhc_state & XHCI_STATE_REMOVING) {
+ xhci_dbg(xhci, "host removed, ring start fail?\n");
xhci_cleanup_command_queue(xhci);
- return;
+
+ goto time_out_completed;
}
/* command timeout on stopped ring, ring can't be aborted */
xhci_dbg(xhci, "Command timeout on stopped ring\n");
xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
+
+time_out_completed:
spin_unlock_irqrestore(&xhci->lock, flags);
return;
}
cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list);
- del_timer(&xhci->cmd_timer);
+ cancel_delayed_work(&xhci->cmd_timer);
trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event);
/* If CMD ring stopped we own the trbs between enqueue and dequeue */
if (cmd_comp_code == COMP_CMD_STOP) {
- xhci_handle_stopped_cmd_ring(xhci, cmd);
+ complete_all(&xhci->cmd_ring_stop_completion);
return;
}
*/
if (cmd_comp_code == COMP_CMD_ABORT) {
xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
- if (cmd->status == COMP_CMD_ABORT)
+ if (cmd->status == COMP_CMD_ABORT) {
+ if (xhci->current_cmd == cmd)
+ xhci->current_cmd = NULL;
goto event_handled;
+ }
}
cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
if (cmd->cmd_list.next != &xhci->cmd_list) {
xhci->current_cmd = list_entry(cmd->cmd_list.next,
struct xhci_command, cmd_list);
- mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+ } else if (xhci->current_cmd == cmd) {
+ xhci->current_cmd = NULL;
}
event_handled:
struct xhci_ep_ctx *ep_ctx;
u32 trb_comp_code;
u32 remaining, requested;
- bool on_data_stage;
+ u32 trb_type;
+ trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(ep_trb->generic.field[3]));
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
xdev = xhci->devs[slot_id];
ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
requested = td->urb->transfer_buffer_length;
remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
- /* not setup (dequeue), or status stage means we are at data stage */
- on_data_stage = (ep_trb != ep_ring->dequeue && ep_trb != td->last_trb);
-
switch (trb_comp_code) {
case COMP_SUCCESS:
- if (ep_trb != td->last_trb) {
+ if (trb_type != TRB_STATUS) {
xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
- on_data_stage ? "data" : "setup");
+ (trb_type == TRB_DATA) ? "data" : "setup");
*status = -ESHUTDOWN;
break;
}
*status = 0;
break;
case COMP_STOP_SHORT:
- if (on_data_stage)
+ if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
td->urb->actual_length = remaining;
else
xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n");
goto finish_td;
case COMP_STOP:
- if (on_data_stage)
+ switch (trb_type) {
+ case TRB_SETUP:
+ td->urb->actual_length = 0;
+ goto finish_td;
+ case TRB_DATA:
+ case TRB_NORMAL:
td->urb->actual_length = requested - remaining;
- goto finish_td;
+ goto finish_td;
+ default:
+ xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
+ trb_type);
+ goto finish_td;
+ }
case COMP_STOP_INVAL:
goto finish_td;
default:
/* else fall through */
case COMP_STALL:
/* Did we transfer part of the data (middle) phase? */
- if (on_data_stage)
+ if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
td->urb->actual_length = requested - remaining;
else if (!td->urb_length_set)
td->urb->actual_length = 0;
}
/* stopped at setup stage, no data transferred */
- if (ep_trb == ep_ring->dequeue)
+ if (trb_type == TRB_SETUP)
goto finish_td;
/*
* if on data stage then update the actual_length of the URB and flag it
* as set, so it won't be overwritten in the event for the last TRB.
*/
- if (on_data_stage) {
+ if (trb_type == TRB_DATA ||
+ trb_type == TRB_NORMAL) {
td->urb_length_set = true;
td->urb->actual_length = requested - remaining;
xhci_dbg(xhci, "Waiting for status stage event\n");
/* if there are no other commands queued we start the timeout timer */
if (xhci->cmd_list.next == &cmd->cmd_list &&
- !timer_pending(&xhci->cmd_timer)) {
+ !delayed_work_pending(&xhci->cmd_timer)) {
xhci->current_cmd = cmd;
- mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
}
queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
mutex_lock(&xhci->mutex);
- if (xhci->xhc_state) /* dying, removing or halted */
+ if (xhci->xhc_state) { /* dying, removing or halted */
+ ret = -ESHUTDOWN;
goto out;
+ }
if (!udev->slot_id) {
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
#define CMD_RING_STATE_STOPPED (1 << 2)
struct list_head cmd_list;
unsigned int cmd_ring_reserved_trbs;
- struct timer_list cmd_timer;
+ struct delayed_work cmd_timer;
+ struct completion cmd_ring_stop_completion;
struct xhci_command *current_cmd;
struct xhci_ring *event_ring;
struct xhci_erst erst;
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state);
void xhci_stop_endpoint_command_watchdog(unsigned long arg);
-void xhci_handle_command_timeout(unsigned long data);
+void xhci_handle_command_timeout(struct work_struct *work);
void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
unsigned int ep_index, unsigned int stream_id);
.init = bfin_musb_init,
.exit = bfin_musb_exit,
+ .fifo_offset = bfin_fifo_offset,
.readb = bfin_readb,
.writeb = bfin_writeb,
.readw = bfin_readw,
struct list_head node;
};
+#ifdef CONFIG_PM
/*
* Called from musb_runtime_resume(), musb_resume(), and
* musb_queue_resume_work(). Callers must take musb->lock.
return error;
}
+#endif
/*
* Called to run work if device is active or else queue the work to happen
void (*pre_root_reset_end)(struct musb *musb);
void (*post_root_reset_end)(struct musb *musb);
int (*phy_callback)(enum musb_vbus_id_status status);
+ void (*clear_ep_rxintr)(struct musb *musb, int epnum);
};
/*
musb->ops->post_root_reset_end(musb);
}
+static inline void musb_platform_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+ if (musb->ops->clear_ep_rxintr)
+ musb->ops->clear_ep_rxintr(musb, epnum);
+}
+
/*
* gets the "dr_mode" property from DT and converts it into musb_mode
* if the property is not found or not recognized returns MUSB_OTG
pm_runtime_put_autosuspend(dev);
}
+void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+ u32 epintr;
+ struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+ const struct dsps_musb_wrapper *wrp = glue->wrp;
+
+ /* musb->lock might already been held */
+ epintr = (1 << epnum) << wrp->rxep_shift;
+ musb_writel(musb->ctrl_base, wrp->epintr_status, epintr);
+}
+
static irqreturn_t dsps_interrupt(int irq, void *hci)
{
struct musb *musb = hci;
.set_mode = dsps_musb_set_mode,
.recover = dsps_musb_recover,
+ .clear_ep_rxintr = dsps_musb_clear_ep_rxintr,
};
static u64 musb_dmamask = DMA_BIT_MASK(32);
int is_in = usb_pipein(urb->pipe);
int status = 0;
u16 csr;
+ struct dma_channel *dma = NULL;
musb_ep_select(regs, hw_end);
if (is_dma_capable()) {
- struct dma_channel *dma;
-
dma = is_in ? ep->rx_channel : ep->tx_channel;
if (dma) {
status = ep->musb->dma_controller->channel_abort(dma);
/* giveback saves bulk toggle */
csr = musb_h_flush_rxfifo(ep, 0);
- /* REVISIT we still get an irq; should likely clear the
- * endpoint's irq status here to avoid bogus irqs.
- * clearing that status is platform-specific...
- */
+ /* clear the endpoint's irq status here to avoid bogus irqs */
+ if (is_dma_capable() && dma)
+ musb_platform_clear_ep_rxintr(musb, ep->epnum);
} else if (ep->epnum) {
musb_h_tx_flush_fifo(ep);
csr = musb_readw(epio, MUSB_TXCSR);
void __iomem *base;
u8 channel_count;
u8 used_channels;
- u8 irq;
+ int irq;
};
#define CYBERJACK_PRODUCT_ID 0x0100
/* Function prototypes */
+static int cyberjack_attach(struct usb_serial *serial);
static int cyberjack_port_probe(struct usb_serial_port *port);
static int cyberjack_port_remove(struct usb_serial_port *port);
static int cyberjack_open(struct tty_struct *tty,
.description = "Reiner SCT Cyberjack USB card reader",
.id_table = id_table,
.num_ports = 1,
+ .attach = cyberjack_attach,
.port_probe = cyberjack_port_probe,
.port_remove = cyberjack_port_remove,
.open = cyberjack_open,
short wrsent; /* Data already sent */
};
+static int cyberjack_attach(struct usb_serial *serial)
+{
+ if (serial->num_bulk_out < serial->num_ports)
+ return -ENODEV;
+
+ return 0;
+}
+
static int cyberjack_port_probe(struct usb_serial_port *port)
{
struct cyberjack_private *priv;
static int f81534_port_probe(struct usb_serial_port *port)
{
struct f81534_port_private *port_priv;
+ int ret;
port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
if (!port_priv)
mutex_init(&port_priv->mcr_mutex);
/* Assign logic-to-phy mapping */
- port_priv->phy_num = f81534_logic_to_phy_port(port->serial, port);
- if (port_priv->phy_num < 0 || port_priv->phy_num >= F81534_NUM_PORT)
- return -ENODEV;
+ ret = f81534_logic_to_phy_port(port->serial, port);
+ if (ret < 0)
+ return ret;
+ port_priv->phy_num = ret;
usb_set_serial_port_data(port, port_priv);
dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__,
port->port_number, port_priv->phy_num);
"%s - usb_submit_urb(write bulk) failed with status = %d\n",
__func__, status);
count = status;
+ kfree(buffer);
}
/* we are done with this urb, so let the host driver
EDGE_COMPATIBILITY_MASK1,
EDGE_COMPATIBILITY_MASK2 };
+ if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
dev = serial->dev;
/* create our private serial structure */
dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
- /* return an error on purpose */
- return -ENODEV;
+ return 1;
}
stayinbootmode:
dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
serial->product_info.TiMode = TI_MODE_BOOT;
- return 0;
+ return 1;
}
static int ti_do_config(struct edgeport_port *port, int feature, int on)
int status;
u16 product_id;
+ /* Make sure we have the required endpoints when in download mode. */
+ if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports)
+ return -ENODEV;
+ }
+
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
if (!edge_serial)
mutex_init(&edge_serial->es_lock);
edge_serial->serial = serial;
+ INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
usb_set_serial_data(serial, edge_serial);
status = download_fw(edge_serial);
- if (status) {
+ if (status < 0) {
kfree(edge_serial);
return status;
}
+ if (status > 0)
+ return 1; /* bind but do not register any ports */
+
product_id = le16_to_cpu(
edge_serial->serial->dev->descriptor.idProduct);
}
}
- INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
edge_heartbeat_schedule(edge_serial);
return 0;
static void edge_disconnect(struct usb_serial *serial)
{
+ struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+ cancel_delayed_work_sync(&edge_serial->heartbeat_work);
}
static void edge_release(struct usb_serial *serial)
u32 clk;
};
+static int iuu_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports)
+ return -ENODEV;
+
+ return 0;
+}
+
static int iuu_port_probe(struct usb_serial_port *port)
{
struct iuu_private *priv;
.tiocmset = iuu_tiocmset,
.set_termios = iuu_set_termios,
.init_termios = iuu_init_termios,
+ .attach = iuu_attach,
.port_probe = iuu_port_probe,
.port_remove = iuu_port_remove,
};
MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
#endif
+static int keyspan_pda_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_out < num_ports ||
+ serial->num_interrupt_in < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int keyspan_pda_port_probe(struct usb_serial_port *port)
{
.break_ctl = keyspan_pda_break_ctl,
.tiocmget = keyspan_pda_tiocmget,
.tiocmset = keyspan_pda_tiocmset,
+ .attach = keyspan_pda_attach,
.port_probe = keyspan_pda_port_probe,
.port_remove = keyspan_pda_port_remove,
};
/* Function prototypes */
+static int kobil_attach(struct usb_serial *serial);
static int kobil_port_probe(struct usb_serial_port *probe);
static int kobil_port_remove(struct usb_serial_port *probe);
static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
.description = "KOBIL USB smart card terminal",
.id_table = id_table,
.num_ports = 1,
+ .attach = kobil_attach,
.port_probe = kobil_port_probe,
.port_remove = kobil_port_remove,
.ioctl = kobil_ioctl,
};
+static int kobil_attach(struct usb_serial *serial)
+{
+ if (serial->num_interrupt_out < serial->num_ports) {
+ dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int kobil_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct urb *write_urb_pool[NUM_URBS];
};
-static struct usb_serial_driver moschip7720_2port_driver;
-
#define USB_VENDOR_ID_MOSCHIP 0x9710
#define MOSCHIP_DEVICE_ID_7720 0x7720
#define MOSCHIP_DEVICE_ID_7715 0x7715
tty_port_tty_wakeup(&mos7720_port->port->port);
}
-/*
- * mos77xx_probe
- * this function installs the appropriate read interrupt endpoint callback
- * depending on whether the device is a 7720 or 7715, thus avoiding costly
- * run-time checks in the high-frequency callback routine itself.
- */
-static int mos77xx_probe(struct usb_serial *serial,
- const struct usb_device_id *id)
-{
- if (id->idProduct == MOSCHIP_DEVICE_ID_7715)
- moschip7720_2port_driver.read_int_callback =
- mos7715_interrupt_callback;
- else
- moschip7720_2port_driver.read_int_callback =
- mos7720_interrupt_callback;
-
- return 0;
-}
-
static int mos77xx_calc_num_ports(struct usb_serial *serial)
{
u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
u16 product;
int ret_val;
+ if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) {
+ dev_err(&serial->interface->dev, "missing bulk endpoints\n");
+ return -ENODEV;
+ }
+
product = le16_to_cpu(serial->dev->descriptor.idProduct);
dev = serial->dev;
tmp->interrupt_in_endpointAddress;
serial->port[1]->interrupt_in_urb = NULL;
serial->port[1]->interrupt_in_buffer = NULL;
+
+ if (serial->port[0]->interrupt_in_urb) {
+ struct urb *urb = serial->port[0]->interrupt_in_urb;
+
+ urb->complete = mos7715_interrupt_callback;
+ }
}
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
- /* start the interrupt urb */
- ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
- if (ret_val)
- dev_err(&dev->dev,
- "%s - Error %d submitting control urb\n",
- __func__, ret_val);
-
#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
if (product == MOSCHIP_DEVICE_ID_7715) {
ret_val = mos7715_parport_init(serial);
return ret_val;
}
#endif
+ /* start the interrupt urb */
+ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
+ if (ret_val) {
+ dev_err(&dev->dev, "failed to submit interrupt urb: %d\n",
+ ret_val);
+ }
+
/* LSR For Port 1 */
read_mos_reg(serial, 0, MOS7720_LSR, &data);
dev_dbg(&dev->dev, "LSR:%x\n", data);
static void mos7720_release(struct usb_serial *serial)
{
+ usb_kill_urb(serial->port[0]->interrupt_in_urb);
+
#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
/* close the parallel port */
if (!mos7720_port)
return -ENOMEM;
- /* Initialize all port interrupt end point to port 0 int endpoint.
- * Our device has only one interrupt endpoint common to all ports.
- */
- port->interrupt_in_endpointAddress =
- port->serial->port[0]->interrupt_in_endpointAddress;
mos7720_port->port = port;
usb_set_serial_port_data(port, mos7720_port);
.close = mos7720_close,
.throttle = mos7720_throttle,
.unthrottle = mos7720_unthrottle,
- .probe = mos77xx_probe,
.attach = mos7720_startup,
.release = mos7720_release,
.port_probe = mos7720_port_probe,
.chars_in_buffer = mos7720_chars_in_buffer,
.break_ctl = mos7720_break,
.read_bulk_callback = mos7720_bulk_in_callback,
- .read_int_callback = NULL /* dynamically assigned in probe() */
+ .read_int_callback = mos7720_interrupt_callback,
};
static struct usb_serial_driver * const serial_drivers[] = {
struct moschip_port {
int port_num; /*Actual port number in the device(1,2,etc) */
- struct urb *write_urb; /* write URB for this port */
struct urb *read_urb; /* read URB for this port */
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
serial,
serial->port[0]->interrupt_in_urb->interval);
- /* start interrupt read for mos7840 *
- * will continue as long as mos7840 is connected */
-
+ /* start interrupt read for mos7840 */
response =
usb_submit_urb(serial->port[0]->interrupt_in_urb,
GFP_KERNEL);
}
}
- usb_kill_urb(mos7840_port->write_urb);
usb_kill_urb(mos7840_port->read_urb);
mos7840_port->read_urb_busy = false;
}
}
- if (mos7840_port->write_urb) {
- /* if this urb had a transfer buffer already (old tx) free it */
- kfree(mos7840_port->write_urb->transfer_buffer);
- usb_free_urb(mos7840_port->write_urb);
- }
-
Data = 0x0;
mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
return mos7840_num_ports;
}
+static int mos7840_attach(struct usb_serial *serial)
+{
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int mos7840_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
.tiocmset = mos7840_tiocmset,
.tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
+ .attach = mos7840_attach,
.port_probe = mos7840_port_probe,
.port_remove = mos7840_port_remove,
.read_bulk_callback = mos7840_bulk_in_callback,
const unsigned char *buf, int count);
static int omninet_write_room(struct tty_struct *tty);
static void omninet_disconnect(struct usb_serial *serial);
+static int omninet_attach(struct usb_serial *serial);
static int omninet_port_probe(struct usb_serial_port *port);
static int omninet_port_remove(struct usb_serial_port *port);
.description = "ZyXEL - omni.net lcd plus usb",
.id_table = id_table,
.num_ports = 1,
+ .attach = omninet_attach,
.port_probe = omninet_port_probe,
.port_remove = omninet_port_remove,
.open = omninet_open,
__u8 od_outseq; /* Sequence number for bulk_out URBs */
};
+static int omninet_attach(struct usb_serial *serial)
+{
+ /* The second bulk-out endpoint is used for writing. */
+ if (serial->num_bulk_out < 2) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int omninet_port_probe(struct usb_serial_port *port)
{
struct omninet_data *od;
static int oti6858_tiocmget(struct tty_struct *tty);
static int oti6858_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
+static int oti6858_attach(struct usb_serial *serial);
static int oti6858_port_probe(struct usb_serial_port *port);
static int oti6858_port_remove(struct usb_serial_port *port);
.write_bulk_callback = oti6858_write_bulk_callback,
.write_room = oti6858_write_room,
.chars_in_buffer = oti6858_chars_in_buffer,
+ .attach = oti6858_attach,
.port_probe = oti6858_port_probe,
.port_remove = oti6858_port_remove,
};
usb_serial_port_softint(port);
}
+static int oti6858_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_in < num_ports ||
+ serial->num_bulk_out < num_ports ||
+ serial->num_interrupt_in < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int oti6858_port_probe(struct usb_serial_port *port)
{
struct oti6858_private *priv;
static int pl2303_startup(struct usb_serial *serial)
{
struct pl2303_serial_private *spriv;
+ unsigned char num_ports = serial->num_ports;
enum pl2303_type type = TYPE_01;
unsigned char *buf;
+ if (serial->num_bulk_in < num_ports ||
+ serial->num_bulk_out < num_ports ||
+ serial->num_interrupt_in < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
if (!spriv)
return -ENOMEM;
{
struct usb_serial *serial;
struct qt2_port_private *port_priv;
- unsigned long flags;
int i;
serial = port->serial;
port_priv = usb_get_serial_port_data(port);
- spin_lock_irqsave(&port_priv->urb_lock, flags);
usb_kill_urb(port_priv->write_urb);
- port_priv->urb_in_use = false;
- spin_unlock_irqrestore(&port_priv->urb_lock, flags);
/* flush the port transmit buffer */
i = usb_control_msg(serial->dev,
return 0;
}
+static int spcp8x5_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_in < num_ports ||
+ serial->num_bulk_out < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int spcp8x5_port_probe(struct usb_serial_port *port)
{
const struct usb_device_id *id = usb_get_serial_data(port->serial);
.tiocmget = spcp8x5_tiocmget,
.tiocmset = spcp8x5_tiocmset,
.probe = spcp8x5_probe,
+ .attach = spcp8x5_attach,
.port_probe = spcp8x5_port_probe,
.port_remove = spcp8x5_port_remove,
};
goto free_tdev;
}
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ status = -ENODEV;
+ goto free_tdev;
+ }
+
return 0;
free_tdev:
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BROKEN_FUA ),
+/* Reported-by George Cherian <george.cherian@cavium.com> */
+UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999,
+ "JMicron",
+ "JMS56x",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_OPCODES),
+
/*
* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
* and Mac USB Dock USB-SCSI */
static DEFINE_MUTEX(parent_list_lock);
static struct class_compat *mdev_bus_compat_class;
+static LIST_HEAD(mdev_list);
+static DEFINE_MUTEX(mdev_list_lock);
+
+struct device *mdev_parent_dev(struct mdev_device *mdev)
+{
+ return mdev->parent->dev;
+}
+EXPORT_SYMBOL(mdev_parent_dev);
+
+void *mdev_get_drvdata(struct mdev_device *mdev)
+{
+ return mdev->driver_data;
+}
+EXPORT_SYMBOL(mdev_get_drvdata);
+
+void mdev_set_drvdata(struct mdev_device *mdev, void *data)
+{
+ mdev->driver_data = data;
+}
+EXPORT_SYMBOL(mdev_set_drvdata);
+
+struct device *mdev_dev(struct mdev_device *mdev)
+{
+ return &mdev->dev;
+}
+EXPORT_SYMBOL(mdev_dev);
+
+struct mdev_device *mdev_from_dev(struct device *dev)
+{
+ return dev_is_mdev(dev) ? to_mdev_device(dev) : NULL;
+}
+EXPORT_SYMBOL(mdev_from_dev);
+
+uuid_le mdev_uuid(struct mdev_device *mdev)
+{
+ return mdev->uuid;
+}
+EXPORT_SYMBOL(mdev_uuid);
+
static int _find_mdev_device(struct device *dev, void *data)
{
struct mdev_device *mdev;
return 0;
}
-static bool mdev_device_exist(struct parent_device *parent, uuid_le uuid)
+static bool mdev_device_exist(struct mdev_parent *parent, uuid_le uuid)
{
struct device *dev;
}
/* Should be called holding parent_list_lock */
-static struct parent_device *__find_parent_device(struct device *dev)
+static struct mdev_parent *__find_parent_device(struct device *dev)
{
- struct parent_device *parent;
+ struct mdev_parent *parent;
list_for_each_entry(parent, &parent_list, next) {
if (parent->dev == dev)
static void mdev_release_parent(struct kref *kref)
{
- struct parent_device *parent = container_of(kref, struct parent_device,
- ref);
+ struct mdev_parent *parent = container_of(kref, struct mdev_parent,
+ ref);
struct device *dev = parent->dev;
kfree(parent);
}
static
-inline struct parent_device *mdev_get_parent(struct parent_device *parent)
+inline struct mdev_parent *mdev_get_parent(struct mdev_parent *parent)
{
if (parent)
kref_get(&parent->ref);
return parent;
}
-static inline void mdev_put_parent(struct parent_device *parent)
+static inline void mdev_put_parent(struct mdev_parent *parent)
{
if (parent)
kref_put(&parent->ref, mdev_release_parent);
static int mdev_device_create_ops(struct kobject *kobj,
struct mdev_device *mdev)
{
- struct parent_device *parent = mdev->parent;
+ struct mdev_parent *parent = mdev->parent;
int ret;
ret = parent->ops->create(kobj, mdev);
*/
static int mdev_device_remove_ops(struct mdev_device *mdev, bool force_remove)
{
- struct parent_device *parent = mdev->parent;
+ struct mdev_parent *parent = mdev->parent;
int ret;
/*
* Add device to list of registered parent devices.
* Returns a negative value on error, otherwise 0.
*/
-int mdev_register_device(struct device *dev, const struct parent_ops *ops)
+int mdev_register_device(struct device *dev, const struct mdev_parent_ops *ops)
{
int ret;
- struct parent_device *parent;
+ struct mdev_parent *parent;
/* check for mandatory ops */
if (!ops || !ops->create || !ops->remove || !ops->supported_type_groups)
void mdev_unregister_device(struct device *dev)
{
- struct parent_device *parent;
+ struct mdev_parent *parent;
bool force_remove = true;
mutex_lock(&parent_list_lock);
{
int ret;
struct mdev_device *mdev;
- struct parent_device *parent;
+ struct mdev_parent *parent;
struct mdev_type *type = to_mdev_type(kobj);
parent = mdev_get_parent(type->parent);
dev_dbg(&mdev->dev, "MDEV: created\n");
mutex_unlock(&parent->lock);
+
+ mutex_lock(&mdev_list_lock);
+ list_add(&mdev->next, &mdev_list);
+ mutex_unlock(&mdev_list_lock);
+
return ret;
create_failed:
int mdev_device_remove(struct device *dev, bool force_remove)
{
- struct mdev_device *mdev;
- struct parent_device *parent;
+ struct mdev_device *mdev, *tmp;
+ struct mdev_parent *parent;
struct mdev_type *type;
int ret;
+ bool found = false;
mdev = to_mdev_device(dev);
+
+ mutex_lock(&mdev_list_lock);
+ list_for_each_entry(tmp, &mdev_list, next) {
+ if (tmp == mdev) {
+ found = true;
+ break;
+ }
+ }
+
+ if (found)
+ list_del(&mdev->next);
+
+ mutex_unlock(&mdev_list_lock);
+
+ if (!found)
+ return -ENODEV;
+
type = to_mdev_type(mdev->type_kobj);
parent = mdev->parent;
mutex_lock(&parent->lock);
ret = mdev_device_remove_ops(mdev, force_remove);
if (ret) {
mutex_unlock(&parent->lock);
+
+ mutex_lock(&mdev_list_lock);
+ list_add(&mdev->next, &mdev_list);
+ mutex_unlock(&mdev_list_lock);
+
return ret;
}
device_unregister(dev);
mutex_unlock(&parent->lock);
mdev_put_parent(parent);
- return ret;
+
+ return 0;
}
static int __init mdev_init(void)
int mdev_bus_register(void);
void mdev_bus_unregister(void);
+struct mdev_parent {
+ struct device *dev;
+ const struct mdev_parent_ops *ops;
+ struct kref ref;
+ struct mutex lock;
+ struct list_head next;
+ struct kset *mdev_types_kset;
+ struct list_head type_list;
+};
+
+struct mdev_device {
+ struct device dev;
+ struct mdev_parent *parent;
+ uuid_le uuid;
+ void *driver_data;
+ struct kref ref;
+ struct list_head next;
+ struct kobject *type_kobj;
+};
+
+#define to_mdev_device(dev) container_of(dev, struct mdev_device, dev)
+#define dev_is_mdev(d) ((d)->bus == &mdev_bus_type)
+
struct mdev_type {
struct kobject kobj;
struct kobject *devices_kobj;
- struct parent_device *parent;
+ struct mdev_parent *parent;
struct list_head next;
struct attribute_group *group;
};
#define to_mdev_type(_kobj) \
container_of(_kobj, struct mdev_type, kobj)
-int parent_create_sysfs_files(struct parent_device *parent);
-void parent_remove_sysfs_files(struct parent_device *parent);
+int parent_create_sysfs_files(struct mdev_parent *parent);
+void parent_remove_sysfs_files(struct mdev_parent *parent);
int mdev_create_sysfs_files(struct device *dev, struct mdev_type *type);
void mdev_remove_sysfs_files(struct device *dev, struct mdev_type *type);
.release = mdev_type_release,
};
-struct mdev_type *add_mdev_supported_type(struct parent_device *parent,
+struct mdev_type *add_mdev_supported_type(struct mdev_parent *parent,
struct attribute_group *group)
{
struct mdev_type *type;
kobject_put(&type->kobj);
}
-static int add_mdev_supported_type_groups(struct parent_device *parent)
+static int add_mdev_supported_type_groups(struct mdev_parent *parent)
{
int i;
}
/* mdev sysfs functions */
-void parent_remove_sysfs_files(struct parent_device *parent)
+void parent_remove_sysfs_files(struct mdev_parent *parent)
{
struct mdev_type *type, *tmp;
kset_unregister(parent->mdev_types_kset);
}
-int parent_create_sysfs_files(struct parent_device *parent)
+int parent_create_sysfs_files(struct mdev_parent *parent)
{
int ret;
static int vfio_mdev_open(void *device_data)
{
struct mdev_device *mdev = device_data;
- struct parent_device *parent = mdev->parent;
+ struct mdev_parent *parent = mdev->parent;
int ret;
if (unlikely(!parent->ops->open))
static void vfio_mdev_release(void *device_data)
{
struct mdev_device *mdev = device_data;
- struct parent_device *parent = mdev->parent;
+ struct mdev_parent *parent = mdev->parent;
if (likely(parent->ops->release))
parent->ops->release(mdev);
unsigned int cmd, unsigned long arg)
{
struct mdev_device *mdev = device_data;
- struct parent_device *parent = mdev->parent;
+ struct mdev_parent *parent = mdev->parent;
if (unlikely(!parent->ops->ioctl))
return -EINVAL;
size_t count, loff_t *ppos)
{
struct mdev_device *mdev = device_data;
- struct parent_device *parent = mdev->parent;
+ struct mdev_parent *parent = mdev->parent;
if (unlikely(!parent->ops->read))
return -EINVAL;
size_t count, loff_t *ppos)
{
struct mdev_device *mdev = device_data;
- struct parent_device *parent = mdev->parent;
+ struct mdev_parent *parent = mdev->parent;
if (unlikely(!parent->ops->write))
return -EINVAL;
static int vfio_mdev_mmap(void *device_data, struct vm_area_struct *vma)
{
struct mdev_device *mdev = device_data;
- struct parent_device *parent = mdev->parent;
+ struct mdev_parent *parent = mdev->parent;
if (unlikely(!parent->ops->mmap))
return -EINVAL;
return ret;
vdev->barmap[index] = pci_iomap(pdev, index, 0);
+ if (!vdev->barmap[index]) {
+ pci_release_selected_regions(pdev, 1 << index);
+ return -ENOMEM;
+ }
}
vma->vm_private_data = vdev;
if (!vdev->has_vga)
return -EINVAL;
- switch (pos) {
+ if (pos > 0xbfffful)
+ return -EINVAL;
+
+ switch ((u32)pos) {
case 0xa0000 ... 0xbffff:
count = min(count, (size_t)(0xc0000 - pos));
iomem = ioremap_nocache(0xa0000, 0xbffff - 0xa0000 + 1);
{
struct vwork *vwork;
struct mm_struct *mm;
+ bool is_current;
if (!npage)
return;
- mm = get_task_mm(task);
+ is_current = (task->mm == current->mm);
+
+ mm = is_current ? task->mm : get_task_mm(task);
if (!mm)
- return; /* process exited or nothing to do */
+ return; /* process exited */
if (down_write_trylock(&mm->mmap_sem)) {
mm->locked_vm += npage;
up_write(&mm->mmap_sem);
- mmput(mm);
+ if (!is_current)
+ mmput(mm);
return;
}
+ if (is_current) {
+ mm = get_task_mm(task);
+ if (!mm)
+ return;
+ }
+
/*
* Couldn't get mmap_sem lock, so must setup to update
* mm->locked_vm later. If locked_vm were atomic, we
* wouldn't need this silliness
*/
vwork = kmalloc(sizeof(struct vwork), GFP_KERNEL);
- if (!vwork) {
+ if (WARN_ON(!vwork)) {
mmput(mm);
return;
}
static long vfio_pin_pages_remote(struct vfio_dma *dma, unsigned long vaddr,
long npage, unsigned long *pfn_base)
{
- unsigned long limit;
- bool lock_cap = ns_capable(task_active_pid_ns(dma->task)->user_ns,
- CAP_IPC_LOCK);
- struct mm_struct *mm;
- long ret, i = 0, lock_acct = 0;
+ unsigned long limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
+ bool lock_cap = capable(CAP_IPC_LOCK);
+ long ret, pinned = 0, lock_acct = 0;
bool rsvd;
dma_addr_t iova = vaddr - dma->vaddr + dma->iova;
- mm = get_task_mm(dma->task);
- if (!mm)
+ /* This code path is only user initiated */
+ if (!current->mm)
return -ENODEV;
- ret = vaddr_get_pfn(mm, vaddr, dma->prot, pfn_base);
+ ret = vaddr_get_pfn(current->mm, vaddr, dma->prot, pfn_base);
if (ret)
- goto pin_pg_remote_exit;
+ return ret;
+ pinned++;
rsvd = is_invalid_reserved_pfn(*pfn_base);
- limit = task_rlimit(dma->task, RLIMIT_MEMLOCK) >> PAGE_SHIFT;
/*
* Reserved pages aren't counted against the user, externally pinned
* pages are already counted against the user.
*/
if (!rsvd && !vfio_find_vpfn(dma, iova)) {
- if (!lock_cap && mm->locked_vm + 1 > limit) {
+ if (!lock_cap && current->mm->locked_vm + 1 > limit) {
put_pfn(*pfn_base, dma->prot);
pr_warn("%s: RLIMIT_MEMLOCK (%ld) exceeded\n", __func__,
limit << PAGE_SHIFT);
- ret = -ENOMEM;
- goto pin_pg_remote_exit;
+ return -ENOMEM;
}
lock_acct++;
}
- i++;
- if (likely(!disable_hugepages)) {
- /* Lock all the consecutive pages from pfn_base */
- for (vaddr += PAGE_SIZE, iova += PAGE_SIZE; i < npage;
- i++, vaddr += PAGE_SIZE, iova += PAGE_SIZE) {
- unsigned long pfn = 0;
+ if (unlikely(disable_hugepages))
+ goto out;
- ret = vaddr_get_pfn(mm, vaddr, dma->prot, &pfn);
- if (ret)
- break;
+ /* Lock all the consecutive pages from pfn_base */
+ for (vaddr += PAGE_SIZE, iova += PAGE_SIZE; pinned < npage;
+ pinned++, vaddr += PAGE_SIZE, iova += PAGE_SIZE) {
+ unsigned long pfn = 0;
- if (pfn != *pfn_base + i ||
- rsvd != is_invalid_reserved_pfn(pfn)) {
+ ret = vaddr_get_pfn(current->mm, vaddr, dma->prot, &pfn);
+ if (ret)
+ break;
+
+ if (pfn != *pfn_base + pinned ||
+ rsvd != is_invalid_reserved_pfn(pfn)) {
+ put_pfn(pfn, dma->prot);
+ break;
+ }
+
+ if (!rsvd && !vfio_find_vpfn(dma, iova)) {
+ if (!lock_cap &&
+ current->mm->locked_vm + lock_acct + 1 > limit) {
put_pfn(pfn, dma->prot);
+ pr_warn("%s: RLIMIT_MEMLOCK (%ld) exceeded\n",
+ __func__, limit << PAGE_SHIFT);
break;
}
-
- if (!rsvd && !vfio_find_vpfn(dma, iova)) {
- if (!lock_cap &&
- mm->locked_vm + lock_acct + 1 > limit) {
- put_pfn(pfn, dma->prot);
- pr_warn("%s: RLIMIT_MEMLOCK (%ld) "
- "exceeded\n", __func__,
- limit << PAGE_SHIFT);
- break;
- }
- lock_acct++;
- }
+ lock_acct++;
}
}
- vfio_lock_acct(dma->task, lock_acct);
- ret = i;
+out:
+ vfio_lock_acct(current, lock_acct);
-pin_pg_remote_exit:
- mmput(mm);
- return ret;
+ return pinned;
}
static long vfio_unpin_pages_remote(struct vfio_dma *dma, dma_addr_t iova,
long unlocked = 0, locked = 0;
long i;
- for (i = 0; i < npage; i++) {
+ for (i = 0; i < npage; i++, iova += PAGE_SIZE) {
if (put_pfn(pfn++, dma->prot)) {
unlocked++;
- if (vfio_find_vpfn(dma, iova + (i << PAGE_SHIFT)))
+ if (vfio_find_vpfn(dma, iova))
locked++;
}
}
info->screen_size = resource_size(res);
info->screen_base = devm_ioremap(&dev->dev, res->start,
info->screen_size);
+ if (!info->screen_base) {
+ framebuffer_release(info);
+ return -ENOMEM;
+ }
+
info->fbops = &cobalt_lcd_fbops;
info->fix = cobalt_lcdfb_fix;
info->fix.smem_start = res->start;
xen_pfn_t *gpfns;
xen_ulong_t *idxs;
int *errs;
- struct xen_add_to_physmap_range xatp;
for (i = 0; i < count; i++) {
+ struct xen_add_to_physmap_range xatp = {
+ .domid = DOMID_SELF,
+ .space = XENMAPSPACE_dev_mmio
+ };
+
r = &resources[i];
nr = DIV_ROUND_UP(resource_size(r), XEN_PAGE_SIZE);
if ((resource_type(r) != IORESOURCE_MEM) || (nr == 0))
idxs[j] = XEN_PFN_DOWN(r->start) + j;
}
- xatp.domid = DOMID_SELF;
xatp.size = nr;
- xatp.space = XENMAPSPACE_dev_mmio;
set_xen_guest_handle(xatp.gpfns, gpfns);
set_xen_guest_handle(xatp.idxs, idxs);
}
ret = init_control_block(cpu, control_block);
- if (ret < 0)
- BUG();
+ BUG_ON(ret < 0);
}
/*
while (*new) {
struct user_evtchn *this;
- this = container_of(*new, struct user_evtchn, node);
+ this = rb_entry(*new, struct user_evtchn, node);
parent = *new;
if (this->port < evtchn->port)
while (node) {
struct user_evtchn *evtchn;
- evtchn = container_of(node, struct user_evtchn, node);
+ evtchn = rb_entry(node, struct user_evtchn, node);
if (evtchn->port < port)
node = node->rb_left;
rc = 0;
} else
rc = swiotlb_late_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs);
+
+ if (!rc)
+ swiotlb_set_max_segment(PAGE_SIZE);
+
return rc;
error:
if (repeat--) {
if (dma_capable(dev, dev_addr, size) &&
!range_straddles_page_boundary(phys, size) &&
!xen_arch_need_swiotlb(dev, phys, dev_addr) &&
- !swiotlb_force) {
+ (swiotlb_force != SWIOTLB_FORCE)) {
/* we are not interested in the dma_addr returned by
* xen_dma_map_page, only in the potential cache flushes executed
* by the function. */
phys_addr_t paddr = sg_phys(sg);
dma_addr_t dev_addr = xen_phys_to_bus(paddr);
- if (swiotlb_force ||
+ if (swiotlb_force == SWIOTLB_FORCE ||
xen_arch_need_swiotlb(hwdev, paddr, dev_addr) ||
!dma_capable(hwdev, dev_addr, sg->length) ||
range_straddles_page_boundary(paddr, sg->length)) {
int xb_read(void *data, unsigned len);
int xb_data_to_read(void);
int xb_wait_for_data_to_read(void);
-int xs_input_avail(void);
extern struct xenstore_domain_interface *xen_store_interface;
extern int xen_store_evtchn;
extern enum xenstore_init xen_store_domain_type;
mutex_unlock(&adap->dev_data->reply_mutex);
}
+static int xenbus_command_reply(struct xenbus_file_priv *u,
+ unsigned int msg_type, const char *reply)
+{
+ struct {
+ struct xsd_sockmsg hdr;
+ const char body[16];
+ } msg;
+ int rc;
+
+ msg.hdr = u->u.msg;
+ msg.hdr.type = msg_type;
+ msg.hdr.len = strlen(reply) + 1;
+ if (msg.hdr.len > sizeof(msg.body))
+ return -E2BIG;
+
+ mutex_lock(&u->reply_mutex);
+ rc = queue_reply(&u->read_buffers, &msg, sizeof(msg.hdr) + msg.hdr.len);
+ wake_up(&u->read_waitq);
+ mutex_unlock(&u->reply_mutex);
+
+ return rc;
+}
+
static int xenbus_write_transaction(unsigned msg_type,
struct xenbus_file_priv *u)
{
rc = -ENOMEM;
goto out;
}
- } else if (msg_type == XS_TRANSACTION_END) {
+ } else if (u->u.msg.tx_id != 0) {
list_for_each_entry(trans, &u->transactions, list)
if (trans->handle.id == u->u.msg.tx_id)
break;
if (&trans->list == &u->transactions)
- return -ESRCH;
+ return xenbus_command_reply(u, XS_ERROR, "ENOENT");
}
reply = xenbus_dev_request_and_reply(&u->u.msg);
path = u->u.buffer + sizeof(u->u.msg);
token = memchr(path, 0, u->u.msg.len);
if (token == NULL) {
- rc = -EILSEQ;
+ rc = xenbus_command_reply(u, XS_ERROR, "EINVAL");
goto out;
}
token++;
if (memchr(token, 0, u->u.msg.len - (token - path)) == NULL) {
- rc = -EILSEQ;
+ rc = xenbus_command_reply(u, XS_ERROR, "EINVAL");
goto out;
}
}
/* Success. Synthesize a reply to say all is OK. */
- {
- struct {
- struct xsd_sockmsg hdr;
- char body[3];
- } __packed reply = {
- {
- .type = msg_type,
- .len = sizeof(reply.body)
- },
- "OK"
- };
-
- mutex_lock(&u->reply_mutex);
- rc = queue_reply(&u->read_buffers, &reply, sizeof(reply));
- wake_up(&u->read_waitq);
- mutex_unlock(&u->reply_mutex);
- }
+ rc = xenbus_command_reply(u, msg_type, "OK");
out:
return rc;
struct file *file = iocb->ki_filp;
struct inode *inode = bdev_file_inode(file);
struct block_device *bdev = I_BDEV(inode);
+ struct blk_plug plug;
struct blkdev_dio *dio;
struct bio *bio;
bool is_read = (iov_iter_rw(iter) == READ);
dio->multi_bio = false;
dio->should_dirty = is_read && (iter->type == ITER_IOVEC);
+ blk_start_plug(&plug);
for (;;) {
bio->bi_bdev = bdev;
bio->bi_iter.bi_sector = pos >> 9;
submit_bio(bio);
bio = bio_alloc(GFP_KERNEL, nr_pages);
}
+ blk_finish_plug(&plug);
if (!dio->is_sync)
return -EIOCBQUEUED;
head = page_buffers(page);
bh = head;
do {
- if (!buffer_mapped(bh))
+ if (!buffer_mapped(bh) || (bh->b_blocknr < block))
goto next;
if (bh->b_blocknr >= block + len)
break;
goto out;
if (fscrypt_dummy_context_enabled(inode)) {
- memset(raw_key, 0x42, FS_AES_256_XTS_KEY_SIZE);
+ memset(raw_key, 0x42, keysize/2);
+ memset(raw_key+keysize/2, 0x24, keysize - (keysize/2));
goto got_key;
}
BUG_ON(1);
}
+ /* No restrictions on file types which are never encrypted */
+ if (!S_ISREG(child->i_mode) && !S_ISDIR(child->i_mode) &&
+ !S_ISLNK(child->i_mode))
+ return 1;
+
/* no restrictions if the parent directory is not encrypted */
if (!parent->i_sb->s_cop->is_encrypted(parent))
return 1;
__wake_up(wq, TASK_NORMAL, wake_all ? 0 : 1, &key);
}
+static int __dax_invalidate_mapping_entry(struct address_space *mapping,
+ pgoff_t index, bool trunc)
+{
+ int ret = 0;
+ void *entry;
+ struct radix_tree_root *page_tree = &mapping->page_tree;
+
+ spin_lock_irq(&mapping->tree_lock);
+ entry = get_unlocked_mapping_entry(mapping, index, NULL);
+ if (!entry || !radix_tree_exceptional_entry(entry))
+ goto out;
+ if (!trunc &&
+ (radix_tree_tag_get(page_tree, index, PAGECACHE_TAG_DIRTY) ||
+ radix_tree_tag_get(page_tree, index, PAGECACHE_TAG_TOWRITE)))
+ goto out;
+ radix_tree_delete(page_tree, index);
+ mapping->nrexceptional--;
+ ret = 1;
+out:
+ put_unlocked_mapping_entry(mapping, index, entry);
+ spin_unlock_irq(&mapping->tree_lock);
+ return ret;
+}
/*
* Delete exceptional DAX entry at @index from @mapping. Wait for radix tree
* entry to get unlocked before deleting it.
*/
int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index)
{
- void *entry;
+ int ret = __dax_invalidate_mapping_entry(mapping, index, true);
- spin_lock_irq(&mapping->tree_lock);
- entry = get_unlocked_mapping_entry(mapping, index, NULL);
/*
* This gets called from truncate / punch_hole path. As such, the caller
* must hold locks protecting against concurrent modifications of the
* caller has seen exceptional entry for this index, we better find it
* at that index as well...
*/
- if (WARN_ON_ONCE(!entry || !radix_tree_exceptional_entry(entry))) {
- spin_unlock_irq(&mapping->tree_lock);
- return 0;
- }
- radix_tree_delete(&mapping->page_tree, index);
+ WARN_ON_ONCE(!ret);
+ return ret;
+}
+
+/*
+ * Invalidate exceptional DAX entry if easily possible. This handles DAX
+ * entries for invalidate_inode_pages() so we evict the entry only if we can
+ * do so without blocking.
+ */
+int dax_invalidate_mapping_entry(struct address_space *mapping, pgoff_t index)
+{
+ int ret = 0;
+ void *entry, **slot;
+ struct radix_tree_root *page_tree = &mapping->page_tree;
+
+ spin_lock_irq(&mapping->tree_lock);
+ entry = __radix_tree_lookup(page_tree, index, NULL, &slot);
+ if (!entry || !radix_tree_exceptional_entry(entry) ||
+ slot_locked(mapping, slot))
+ goto out;
+ if (radix_tree_tag_get(page_tree, index, PAGECACHE_TAG_DIRTY) ||
+ radix_tree_tag_get(page_tree, index, PAGECACHE_TAG_TOWRITE))
+ goto out;
+ radix_tree_delete(page_tree, index);
mapping->nrexceptional--;
+ ret = 1;
+out:
spin_unlock_irq(&mapping->tree_lock);
- dax_wake_mapping_entry_waiter(mapping, index, entry, true);
+ if (ret)
+ dax_wake_mapping_entry_waiter(mapping, index, entry, true);
+ return ret;
+}
- return 1;
+/*
+ * Invalidate exceptional DAX entry if it is clean.
+ */
+int dax_invalidate_mapping_entry_sync(struct address_space *mapping,
+ pgoff_t index)
+{
+ return __dax_invalidate_mapping_entry(mapping, index, false);
}
/*
* otherwise it will simply fall out of the page cache under memory
* pressure without ever having been dirtied.
*/
-static int dax_load_hole(struct address_space *mapping, void *entry,
+static int dax_load_hole(struct address_space *mapping, void **entry,
struct vm_fault *vmf)
{
struct page *page;
+ int ret;
/* Hole page already exists? Return it... */
- if (!radix_tree_exceptional_entry(entry)) {
- vmf->page = entry;
- return VM_FAULT_LOCKED;
+ if (!radix_tree_exceptional_entry(*entry)) {
+ page = *entry;
+ goto out;
}
/* This will replace locked radix tree entry with a hole page */
vmf->gfp_mask | __GFP_ZERO);
if (!page)
return VM_FAULT_OOM;
+ out:
vmf->page = page;
- return VM_FAULT_LOCKED;
+ ret = finish_fault(vmf);
+ vmf->page = NULL;
+ *entry = page;
+ if (!ret) {
+ /* Grab reference for PTE that is now referencing the page */
+ get_page(page);
+ return VM_FAULT_NOPAGE;
+ }
+ return ret;
}
static int copy_user_dax(struct block_device *bdev, sector_t sector, size_t size,
if (WARN_ON_ONCE(iomap->type != IOMAP_MAPPED))
return -EIO;
+ /*
+ * Write can allocate block for an area which has a hole page mapped
+ * into page tables. We have to tear down these mappings so that data
+ * written by write(2) is visible in mmap.
+ */
+ if ((iomap->flags & IOMAP_F_NEW) && inode->i_mapping->nrpages) {
+ invalidate_inode_pages2_range(inode->i_mapping,
+ pos >> PAGE_SHIFT,
+ (end - 1) >> PAGE_SHIFT);
+ }
+
while (pos < end) {
unsigned offset = pos & (PAGE_SIZE - 1);
struct blk_dax_ctl dax = { 0 };
if (iov_iter_rw(iter) == WRITE)
flags |= IOMAP_WRITE;
- /*
- * Yes, even DAX files can have page cache attached to them: A zeroed
- * page is inserted into the pagecache when we have to serve a write
- * fault on a hole. It should never be dirtied and can simply be
- * dropped from the pagecache once we get real data for the page.
- *
- * XXX: This is racy against mmap, and there's nothing we can do about
- * it. We'll eventually need to shift this down even further so that
- * we can check if we allocated blocks over a hole first.
- */
- if (mapping->nrpages) {
- ret = invalidate_inode_pages2_range(mapping,
- pos >> PAGE_SHIFT,
- (pos + iov_iter_count(iter) - 1) >> PAGE_SHIFT);
- WARN_ON_ONCE(ret);
- }
-
while (iov_iter_count(iter)) {
ret = iomap_apply(inode, pos, iov_iter_count(iter), flags, ops,
iter, dax_iomap_actor);
}
EXPORT_SYMBOL_GPL(dax_iomap_rw);
+static int dax_fault_return(int error)
+{
+ if (error == 0)
+ return VM_FAULT_NOPAGE;
+ if (error == -ENOMEM)
+ return VM_FAULT_OOM;
+ return VM_FAULT_SIGBUS;
+}
+
/**
* dax_iomap_fault - handle a page fault on a DAX file
* @vma: The virtual memory area where the fault occurred
if (pos >= i_size_read(inode))
return VM_FAULT_SIGBUS;
- entry = grab_mapping_entry(mapping, vmf->pgoff, 0);
- if (IS_ERR(entry)) {
- error = PTR_ERR(entry);
- goto out;
- }
-
if ((vmf->flags & FAULT_FLAG_WRITE) && !vmf->cow_page)
flags |= IOMAP_WRITE;
*/
error = ops->iomap_begin(inode, pos, PAGE_SIZE, flags, &iomap);
if (error)
- goto unlock_entry;
+ return dax_fault_return(error);
if (WARN_ON_ONCE(iomap.offset + iomap.length < pos + PAGE_SIZE)) {
- error = -EIO; /* fs corruption? */
+ vmf_ret = dax_fault_return(-EIO); /* fs corruption? */
+ goto finish_iomap;
+ }
+
+ entry = grab_mapping_entry(mapping, vmf->pgoff, 0);
+ if (IS_ERR(entry)) {
+ vmf_ret = dax_fault_return(PTR_ERR(entry));
goto finish_iomap;
}
}
if (error)
- goto finish_iomap;
+ goto error_unlock_entry;
__SetPageUptodate(vmf->cow_page);
vmf_ret = finish_fault(vmf);
if (!vmf_ret)
vmf_ret = VM_FAULT_DONE_COW;
- goto finish_iomap;
+ goto unlock_entry;
}
switch (iomap.type) {
}
error = dax_insert_mapping(mapping, iomap.bdev, sector,
PAGE_SIZE, &entry, vma, vmf);
+ /* -EBUSY is fine, somebody else faulted on the same PTE */
+ if (error == -EBUSY)
+ error = 0;
break;
case IOMAP_UNWRITTEN:
case IOMAP_HOLE:
if (!(vmf->flags & FAULT_FLAG_WRITE)) {
- vmf_ret = dax_load_hole(mapping, entry, vmf);
- break;
+ vmf_ret = dax_load_hole(mapping, &entry, vmf);
+ goto unlock_entry;
}
/*FALLTHRU*/
default:
break;
}
+ error_unlock_entry:
+ vmf_ret = dax_fault_return(error) | major;
+ unlock_entry:
+ put_locked_mapping_entry(mapping, vmf->pgoff, entry);
finish_iomap:
if (ops->iomap_end) {
- if (error || (vmf_ret & VM_FAULT_ERROR)) {
- /* keep previous error */
- ops->iomap_end(inode, pos, PAGE_SIZE, 0, flags,
- &iomap);
- } else {
- error = ops->iomap_end(inode, pos, PAGE_SIZE,
- PAGE_SIZE, flags, &iomap);
- }
- }
- unlock_entry:
- if (vmf_ret != VM_FAULT_LOCKED || error)
- put_locked_mapping_entry(mapping, vmf->pgoff, entry);
- out:
- if (error == -ENOMEM)
- return VM_FAULT_OOM | major;
- /* -EBUSY is fine, somebody else faulted on the same PTE */
- if (error < 0 && error != -EBUSY)
- return VM_FAULT_SIGBUS | major;
- if (vmf_ret) {
- WARN_ON_ONCE(error); /* -EBUSY from ops->iomap_end? */
- return vmf_ret;
+ int copied = PAGE_SIZE;
+
+ if (vmf_ret & VM_FAULT_ERROR)
+ copied = 0;
+ /*
+ * The fault is done by now and there's no way back (other
+ * thread may be already happily using PTE we have installed).
+ * Just ignore error from ->iomap_end since we cannot do much
+ * with it.
+ */
+ ops->iomap_end(inode, pos, PAGE_SIZE, copied, flags, &iomap);
}
- return VM_FAULT_NOPAGE | major;
+ return vmf_ret;
}
EXPORT_SYMBOL_GPL(dax_iomap_fault);
if ((pgoff | PG_PMD_COLOUR) > max_pgoff)
goto fallback;
- /*
- * grab_mapping_entry() will make sure we get a 2M empty entry, a DAX
- * PMD or a HZP entry. If it can't (because a 4k page is already in
- * the tree, for instance), it will return -EEXIST and we just fall
- * back to 4k entries.
- */
- entry = grab_mapping_entry(mapping, pgoff, RADIX_DAX_PMD);
- if (IS_ERR(entry))
- goto fallback;
-
/*
* Note that we don't use iomap_apply here. We aren't doing I/O, only
* setting up a mapping, so really we're using iomap_begin() as a way
pos = (loff_t)pgoff << PAGE_SHIFT;
error = ops->iomap_begin(inode, pos, PMD_SIZE, iomap_flags, &iomap);
if (error)
- goto unlock_entry;
+ goto fallback;
+
if (iomap.offset + iomap.length < pos + PMD_SIZE)
goto finish_iomap;
+ /*
+ * grab_mapping_entry() will make sure we get a 2M empty entry, a DAX
+ * PMD or a HZP entry. If it can't (because a 4k page is already in
+ * the tree, for instance), it will return -EEXIST and we just fall
+ * back to 4k entries.
+ */
+ entry = grab_mapping_entry(mapping, pgoff, RADIX_DAX_PMD);
+ if (IS_ERR(entry))
+ goto finish_iomap;
+
vmf.pgoff = pgoff;
vmf.flags = flags;
vmf.gfp_mask = mapping_gfp_mask(mapping) | __GFP_IO;
case IOMAP_UNWRITTEN:
case IOMAP_HOLE:
if (WARN_ON_ONCE(write))
- goto finish_iomap;
+ goto unlock_entry;
result = dax_pmd_load_hole(vma, pmd, &vmf, address, &iomap,
&entry);
break;
break;
}
+ unlock_entry:
+ put_locked_mapping_entry(mapping, pgoff, entry);
finish_iomap:
if (ops->iomap_end) {
- if (result == VM_FAULT_FALLBACK) {
- ops->iomap_end(inode, pos, PMD_SIZE, 0, iomap_flags,
- &iomap);
- } else {
- error = ops->iomap_end(inode, pos, PMD_SIZE, PMD_SIZE,
- iomap_flags, &iomap);
- if (error)
- result = VM_FAULT_FALLBACK;
- }
+ int copied = PMD_SIZE;
+
+ if (result == VM_FAULT_FALLBACK)
+ copied = 0;
+ /*
+ * The fault is done by now and there's no way back (other
+ * thread may be already happily using PMD we have installed).
+ * Just ignore error from ->iomap_end since we cannot do much
+ * with it.
+ */
+ ops->iomap_end(inode, pos, PMD_SIZE, copied, iomap_flags,
+ &iomap);
}
- unlock_entry:
- put_locked_mapping_entry(mapping, pgoff, entry);
fallback:
if (result == VM_FAULT_FALLBACK) {
split_huge_pmd(vma, pmd, address);
mutex_unlock(&ei->truncate_mutex);
goto cleanup;
}
- } else {
- *new = true;
}
+ *new = true;
ext2_splice_branch(inode, iblock, partial, indirect_blks, count);
mutex_unlock(&ei->truncate_mutex);
static int ext4_dax_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
int result;
- handle_t *handle = NULL;
struct inode *inode = file_inode(vma->vm_file);
struct super_block *sb = inode->i_sb;
bool write = vmf->flags & FAULT_FLAG_WRITE;
if (write) {
sb_start_pagefault(sb);
file_update_time(vma->vm_file);
- down_read(&EXT4_I(inode)->i_mmap_sem);
- handle = ext4_journal_start_sb(sb, EXT4_HT_WRITE_PAGE,
- EXT4_DATA_TRANS_BLOCKS(sb));
- } else
- down_read(&EXT4_I(inode)->i_mmap_sem);
-
- if (IS_ERR(handle))
- result = VM_FAULT_SIGBUS;
- else
- result = dax_iomap_fault(vma, vmf, &ext4_iomap_ops);
-
- if (write) {
- if (!IS_ERR(handle))
- ext4_journal_stop(handle);
- up_read(&EXT4_I(inode)->i_mmap_sem);
+ }
+ down_read(&EXT4_I(inode)->i_mmap_sem);
+ result = dax_iomap_fault(vma, vmf, &ext4_iomap_ops);
+ up_read(&EXT4_I(inode)->i_mmap_sem);
+ if (write)
sb_end_pagefault(sb);
- } else
- up_read(&EXT4_I(inode)->i_mmap_sem);
return result;
}
pmd_t *pmd, unsigned int flags)
{
int result;
- handle_t *handle = NULL;
struct inode *inode = file_inode(vma->vm_file);
struct super_block *sb = inode->i_sb;
bool write = flags & FAULT_FLAG_WRITE;
if (write) {
sb_start_pagefault(sb);
file_update_time(vma->vm_file);
- down_read(&EXT4_I(inode)->i_mmap_sem);
- handle = ext4_journal_start_sb(sb, EXT4_HT_WRITE_PAGE,
- ext4_chunk_trans_blocks(inode,
- PMD_SIZE / PAGE_SIZE));
- } else
- down_read(&EXT4_I(inode)->i_mmap_sem);
-
- if (IS_ERR(handle))
- result = VM_FAULT_SIGBUS;
- else {
- result = dax_iomap_pmd_fault(vma, addr, pmd, flags,
- &ext4_iomap_ops);
}
-
- if (write) {
- if (!IS_ERR(handle))
- ext4_journal_stop(handle);
- up_read(&EXT4_I(inode)->i_mmap_sem);
+ down_read(&EXT4_I(inode)->i_mmap_sem);
+ result = dax_iomap_pmd_fault(vma, addr, pmd, flags,
+ &ext4_iomap_ops);
+ up_read(&EXT4_I(inode)->i_mmap_sem);
+ if (write)
sb_end_pagefault(sb);
- } else
- up_read(&EXT4_I(inode)->i_mmap_sem);
return result;
}
}
}
-void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old)
-{
- assert_spin_locked(&old->lock);
- new->inode = old->inode;
- new->mnt = old->mnt;
- if (old->group)
- fsnotify_get_group(old->group);
- new->group = old->group;
- new->mask = old->mask;
- new->free_mark = old->free_mark;
-}
-
/*
* Nothing fancy, just initialize lists and locks and counters.
*/
goto out;
}
+ ASSERT(xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved +
+ xfs_perag_resv(pag, XFS_AG_RESV_AGFL)->ar_reserved <=
+ pag->pagf_freeblks + pag->pagf_flcount);
out:
return error;
}
*/
xfs_extlen_t
xfs_refcountbt_max_size(
- struct xfs_mount *mp)
+ struct xfs_mount *mp,
+ xfs_agblock_t agblocks)
{
/* Bail out if we're uninitialized, which can happen in mkfs. */
if (mp->m_refc_mxr[0] == 0)
return 0;
- return xfs_refcountbt_calc_size(mp, mp->m_sb.sb_agblocks);
+ return xfs_refcountbt_calc_size(mp, agblocks);
}
/*
{
struct xfs_buf *agbp;
struct xfs_agf *agf;
+ xfs_agblock_t agblocks;
xfs_extlen_t tree_len;
int error;
if (!xfs_sb_version_hasreflink(&mp->m_sb))
return 0;
- *ask += xfs_refcountbt_max_size(mp);
error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
if (error)
return error;
agf = XFS_BUF_TO_AGF(agbp);
+ agblocks = be32_to_cpu(agf->agf_length);
tree_len = be32_to_cpu(agf->agf_refcount_blocks);
xfs_buf_relse(agbp);
+ *ask += xfs_refcountbt_max_size(mp, agblocks);
*used += tree_len;
return error;
extern xfs_extlen_t xfs_refcountbt_calc_size(struct xfs_mount *mp,
unsigned long long len);
-extern xfs_extlen_t xfs_refcountbt_max_size(struct xfs_mount *mp);
+extern xfs_extlen_t xfs_refcountbt_max_size(struct xfs_mount *mp,
+ xfs_agblock_t agblocks);
extern int xfs_refcountbt_calc_reserves(struct xfs_mount *mp,
xfs_agnumber_t agno, xfs_extlen_t *ask, xfs_extlen_t *used);
*/
xfs_extlen_t
xfs_rmapbt_max_size(
- struct xfs_mount *mp)
+ struct xfs_mount *mp,
+ xfs_agblock_t agblocks)
{
/* Bail out if we're uninitialized, which can happen in mkfs. */
if (mp->m_rmap_mxr[0] == 0)
return 0;
- return xfs_rmapbt_calc_size(mp, mp->m_sb.sb_agblocks);
+ return xfs_rmapbt_calc_size(mp, agblocks);
}
/*
{
struct xfs_buf *agbp;
struct xfs_agf *agf;
- xfs_extlen_t pool_len;
+ xfs_agblock_t agblocks;
xfs_extlen_t tree_len;
int error;
if (!xfs_sb_version_hasrmapbt(&mp->m_sb))
return 0;
- /* Reserve 1% of the AG or enough for 1 block per record. */
- pool_len = max(mp->m_sb.sb_agblocks / 100, xfs_rmapbt_max_size(mp));
- *ask += pool_len;
-
error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
if (error)
return error;
agf = XFS_BUF_TO_AGF(agbp);
+ agblocks = be32_to_cpu(agf->agf_length);
tree_len = be32_to_cpu(agf->agf_rmap_blocks);
xfs_buf_relse(agbp);
+ /* Reserve 1% of the AG or enough for 1 block per record. */
+ *ask += max(agblocks / 100, xfs_rmapbt_max_size(mp, agblocks));
*used += tree_len;
return error;
extern xfs_extlen_t xfs_rmapbt_calc_size(struct xfs_mount *mp,
unsigned long long len);
-extern xfs_extlen_t xfs_rmapbt_max_size(struct xfs_mount *mp);
+extern xfs_extlen_t xfs_rmapbt_max_size(struct xfs_mount *mp,
+ xfs_agblock_t agblocks);
extern int xfs_rmapbt_calc_reserves(struct xfs_mount *mp,
xfs_agnumber_t agno, xfs_extlen_t *ask, xfs_extlen_t *used);
xfs_set_low_space_thresholds(mp);
mp->m_alloc_set_aside = xfs_alloc_set_aside(mp);
+ /*
+ * If we expanded the last AG, free the per-AG reservation
+ * so we can reinitialize it with the new size.
+ */
+ if (new) {
+ struct xfs_perag *pag;
+
+ pag = xfs_perag_get(mp, agno);
+ error = xfs_ag_resv_free(pag);
+ xfs_perag_put(pag);
+ if (error)
+ goto out;
+ }
+
/* Reserve AG metadata blocks. */
error = xfs_fs_reserve_ag_blocks(mp);
if (error && error != -ENOSPC)
* If the mapping is dirty or under writeback we cannot touch the
* CoW fork. Leave it alone if we're in the midst of a directio.
*/
- if (mapping_tagged(VFS_I(ip)->i_mapping, PAGECACHE_TAG_DIRTY) ||
+ if ((VFS_I(ip)->i_state & I_DIRTY_PAGES) ||
+ mapping_tagged(VFS_I(ip)->i_mapping, PAGECACHE_TAG_DIRTY) ||
mapping_tagged(VFS_I(ip)->i_mapping, PAGECACHE_TAG_WRITEBACK) ||
atomic_read(&VFS_I(ip)->i_dio_count))
return 0;
xfs_refcount_finish_one_cleanup(tp, rcur, error);
error = xfs_defer_finish(&tp, &dfops, NULL);
if (error)
- goto abort_error;
+ goto abort_defer;
set_bit(XFS_CUI_RECOVERED, &cuip->cui_flags);
error = xfs_trans_commit(tp);
return error;
abort_error:
xfs_refcount_finish_one_cleanup(tp, rcur, error);
+abort_defer:
xfs_defer_cancel(&dfops);
xfs_trans_cancel(tp);
return error;
int retries;
struct xfs_error_cfg *cfg = to_error_cfg(kobject);
- if (cfg->retry_timeout == XFS_ERR_RETRY_FOREVER)
+ if (cfg->max_retries == XFS_ERR_RETRY_FOREVER)
retries = -1;
else
retries = cfg->max_retries;
return -EINVAL;
if (val == -1)
- cfg->retry_timeout = XFS_ERR_RETRY_FOREVER;
+ cfg->max_retries = XFS_ERR_RETRY_FOREVER;
else
cfg->max_retries = val;
return count;
#include <linux/bitops.h>
+#undef __memset
extern void *__memset(void *, int, __kernel_size_t);
+#undef __memcpy
extern void *__memcpy(void *, const void *, __kernel_size_t);
+#undef __memmove
extern void *__memmove(void *, const void *, __kernel_size_t);
+#undef memset
extern void *memset(void *, int, __kernel_size_t);
+#undef memcpy
extern void *memcpy(void *, const void *, __kernel_size_t);
+#undef memmove
extern void *memmove(void *, const void *, __kernel_size_t);
#define R7S72100_CLK_SCIF6 1
#define R7S72100_CLK_SCIF7 0
+/* MSTP5 */
+#define R7S72100_CLK_OSTM0 1
+#define R7S72100_CLK_OSTM1 0
+
/* MSTP7 */
#define R7S72100_CLK_ETHER 4
--- /dev/null
+/*
+ * stm32fx-clock.h
+ *
+ * Copyright (C) 2016 STMicroelectronics
+ * Author: Gabriel Fernandez for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+/*
+ * List of clocks wich are not derived from system clock (SYSCLOCK)
+ *
+ * The index of these clocks is the secondary index of DT bindings
+ * (see Documentatoin/devicetree/bindings/clock/st,stm32-rcc.txt)
+ *
+ * e.g:
+ <assigned-clocks = <&rcc 1 CLK_LSE>;
+*/
+
+#ifndef _DT_BINDINGS_CLK_STMFX_H
+#define _DT_BINDINGS_CLK_STMFX_H
+
+#define SYSTICK 0
+#define FCLK 1
+#define CLK_LSI 2
+#define CLK_LSE 3
+#define CLK_HSE_RTC 4
+#define CLK_RTC 5
+#define PLL_VCO_I2S 6
+#define PLL_VCO_SAI 7
+#define CLK_LCD 8
+#define CLK_I2S 9
+#define CLK_SAI1 10
+#define CLK_SAI2 11
+#define CLK_I2SQ_PDIV 12
+#define CLK_SAIQ_PDIV 13
+
+#define END_PRIMARY_CLK 14
+
+#endif
#define STM32F4_RCC_AHB1_GPIOJ 9
#define STM32F4_RCC_AHB1_GPIOK 10
#define STM32F4_RCC_AHB1_CRC 12
+#define STM32F4_RCC_AHB1_BKPSRAM 18
+#define STM32F4_RCC_AHB1_CCMDATARAM 20
#define STM32F4_RCC_AHB1_DMA1 21
#define STM32F4_RCC_AHB1_DMA2 22
#define STM32F4_RCC_AHB1_DMA2D 23
#define STM32F4_RCC_AHB1_ETHMAC 25
-#define STM32F4_RCC_AHB1_OTGHS 29
+#define STM32F4_RCC_AHB1_ETHMACTX 26
+#define STM32F4_RCC_AHB1_ETHMACRX 27
+#define STM32F4_RCC_AHB1_ETHMACPTP 28
+#define STM32F4_RCC_AHB1_OTGHS 29
+#define STM32F4_RCC_AHB1_OTGHSULPI 30
#define STM32F4_AHB1_RESET(bit) (STM32F4_RCC_AHB1_##bit + (0x10 * 8))
-#define STM32F4_AHB1_CLOCK(bit) (STM32F4_RCC_AHB1_##bit + (0x30 * 8))
+#define STM32F4_AHB1_CLOCK(bit) (STM32F4_RCC_AHB1_##bit)
/* AHB2 */
#define STM32F4_RCC_AHB2_OTGFS 7
#define STM32F4_AHB2_RESET(bit) (STM32F4_RCC_AHB2_##bit + (0x14 * 8))
-#define STM32F4_AHB2_CLOCK(bit) (STM32F4_RCC_AHB2_##bit + (0x34 * 8))
+#define STM32F4_AHB2_CLOCK(bit) (STM32F4_RCC_AHB2_##bit + 0x20)
/* AHB3 */
#define STM32F4_RCC_AHB3_FMC 0
+#define STM32F4_RCC_AHB3_QSPI 1
#define STM32F4_AHB3_RESET(bit) (STM32F4_RCC_AHB3_##bit + (0x18 * 8))
-#define STM32F4_AHB3_CLOCK(bit) (STM32F4_RCC_AHB3_##bit + (0x38 * 8))
+#define STM32F4_AHB3_CLOCK(bit) (STM32F4_RCC_AHB3_##bit + 0x40)
/* APB1 */
#define STM32F4_RCC_APB1_TIM2 0
#define STM32F4_RCC_APB1_UART8 31
#define STM32F4_APB1_RESET(bit) (STM32F4_RCC_APB1_##bit + (0x20 * 8))
-#define STM32F4_APB1_CLOCK(bit) (STM32F4_RCC_APB1_##bit + (0x40 * 8))
+#define STM32F4_APB1_CLOCK(bit) (STM32F4_RCC_APB1_##bit + 0x80)
/* APB2 */
#define STM32F4_RCC_APB2_TIM1 0
#define STM32F4_RCC_APB2_TIM8 1
#define STM32F4_RCC_APB2_USART1 4
#define STM32F4_RCC_APB2_USART6 5
-#define STM32F4_RCC_APB2_ADC 8
+#define STM32F4_RCC_APB2_ADC1 8
+#define STM32F4_RCC_APB2_ADC2 9
+#define STM32F4_RCC_APB2_ADC3 10
#define STM32F4_RCC_APB2_SDIO 11
#define STM32F4_RCC_APB2_SPI1 12
#define STM32F4_RCC_APB2_SPI4 13
#define STM32F4_RCC_APB2_SPI6 21
#define STM32F4_RCC_APB2_SAI1 22
#define STM32F4_RCC_APB2_LTDC 26
+#define STM32F4_RCC_APB2_DSI 27
#define STM32F4_APB2_RESET(bit) (STM32F4_RCC_APB2_##bit + (0x24 * 8))
-#define STM32F4_APB2_CLOCK(bit) (STM32F4_RCC_APB2_##bit + (0x44 * 8))
+#define STM32F4_APB2_CLOCK(bit) (STM32F4_RCC_APB2_##bit + 0xA0)
#endif /* _DT_BINDINGS_MFD_STM32F4_RCC_H */
+++ /dev/null
-/*
- * This header provides macros for TI TPS65217 DT bindings.
- *
- * Copyright (C) 2016 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __DT_BINDINGS_TPS65217_H__
-#define __DT_BINDINGS_TPS65217_H__
-
-#define TPS65217_IRQ_USB 0
-#define TPS65217_IRQ_AC 1
-#define TPS65217_IRQ_PB 2
-
-#endif
int dax_iomap_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
struct iomap_ops *ops);
int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index);
+int dax_invalidate_mapping_entry(struct address_space *mapping, pgoff_t index);
+int dax_invalidate_mapping_entry_sync(struct address_space *mapping,
+ pgoff_t index);
void dax_wake_mapping_entry_waiter(struct address_space *mapping,
pgoff_t index, void *entry, bool wake_all);
struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off,
const struct bpf_insn *patch, u32 len);
void bpf_warn_invalid_xdp_action(u32 act);
-void bpf_warn_invalid_xdp_buffer(void);
#ifdef CONFIG_BPF_JIT
extern int bpf_jit_enable;
extern struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *group, struct inode *inode);
/* find (and take a reference) to a mark associated with group and vfsmount */
extern struct fsnotify_mark *fsnotify_find_vfsmount_mark(struct fsnotify_group *group, struct vfsmount *mnt);
-/* copy the values from old into new */
-extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
/* set the ignored_mask of a mark */
extern void fsnotify_set_mark_ignored_mask_locked(struct fsnotify_mark *mark, __u32 mask);
/* set the mask of a mark (might pin the object into memory */
DISK_EVENT_EJECT_REQUEST = 1 << 1, /* eject requested */
};
-#define BLK_SCSI_MAX_CMDS (256)
-#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
-
-struct blk_scsi_cmd_filter {
- unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
- unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
- struct kobject kobj;
-};
-
struct disk_part_tbl {
struct rcu_head rcu_head;
int len;
u8 mask;
};
+/**
+ * struct st_sensor_das - ST sensor device data alignment selection
+ * @addr: address of the register.
+ * @mask: mask to write the das flag for left alignment.
+ */
+struct st_sensor_das {
+ u8 addr;
+ u8 mask;
+};
+
/**
* struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt
* @addr: address of the register.
* @enable_axis: Enable one or more axis of the sensor.
* @fs: Full scale register and full scale list available.
* @bdu: Block data update register.
+ * @das: Data Alignment Selection register.
* @drdy_irq: Data ready register of the sensor.
* @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read.
* @bootime: samples to discard when sensor passing from power-down to power-up.
struct st_sensor_axis enable_axis;
struct st_sensor_fullscale fs;
struct st_sensor_bdu bdu;
+ struct st_sensor_das das;
struct st_sensor_data_ready_irq drdy_irq;
bool multi_read_bit;
unsigned int bootime;
#ifndef MDEV_H
#define MDEV_H
-/* Parent device */
-struct parent_device {
- struct device *dev;
- const struct parent_ops *ops;
-
- /* internal */
- struct kref ref;
- struct mutex lock;
- struct list_head next;
- struct kset *mdev_types_kset;
- struct list_head type_list;
-};
-
-/* Mediated device */
-struct mdev_device {
- struct device dev;
- struct parent_device *parent;
- uuid_le uuid;
- void *driver_data;
-
- /* internal */
- struct kref ref;
- struct list_head next;
- struct kobject *type_kobj;
-};
+struct mdev_device;
/**
- * struct parent_ops - Structure to be registered for each parent device to
+ * struct mdev_parent_ops - Structure to be registered for each parent device to
* register the device to mdev module.
*
* @owner: The module owner.
* @mdev: mediated device structure
* @vma: vma structure
* Parent device that support mediated device should be registered with mdev
- * module with parent_ops structure.
+ * module with mdev_parent_ops structure.
**/
-
-struct parent_ops {
+struct mdev_parent_ops {
struct module *owner;
const struct attribute_group **dev_attr_groups;
const struct attribute_group **mdev_attr_groups;
size_t count, loff_t *ppos);
ssize_t (*write)(struct mdev_device *mdev, const char __user *buf,
size_t count, loff_t *ppos);
- ssize_t (*ioctl)(struct mdev_device *mdev, unsigned int cmd,
+ long (*ioctl)(struct mdev_device *mdev, unsigned int cmd,
unsigned long arg);
int (*mmap)(struct mdev_device *mdev, struct vm_area_struct *vma);
};
};
#define to_mdev_driver(drv) container_of(drv, struct mdev_driver, driver)
-#define to_mdev_device(dev) container_of(dev, struct mdev_device, dev)
-
-static inline void *mdev_get_drvdata(struct mdev_device *mdev)
-{
- return mdev->driver_data;
-}
-static inline void mdev_set_drvdata(struct mdev_device *mdev, void *data)
-{
- mdev->driver_data = data;
-}
+extern void *mdev_get_drvdata(struct mdev_device *mdev);
+extern void mdev_set_drvdata(struct mdev_device *mdev, void *data);
+extern uuid_le mdev_uuid(struct mdev_device *mdev);
extern struct bus_type mdev_bus_type;
-#define dev_is_mdev(d) ((d)->bus == &mdev_bus_type)
-
extern int mdev_register_device(struct device *dev,
- const struct parent_ops *ops);
+ const struct mdev_parent_ops *ops);
extern void mdev_unregister_device(struct device *dev);
extern int mdev_register_driver(struct mdev_driver *drv, struct module *owner);
extern void mdev_unregister_driver(struct mdev_driver *drv);
+extern struct device *mdev_parent_dev(struct mdev_device *mdev);
+extern struct device *mdev_dev(struct mdev_device *mdev);
+extern struct mdev_device *mdev_from_dev(struct device *dev);
+
#endif /* MDEV_H */
int get_phv_bit(struct mlx4_dev *dev, u8 port, int *phv);
int mlx4_get_is_vlan_offload_disabled(struct mlx4_dev *dev, u8 port,
bool *vlan_offload_disabled);
+void mlx4_handle_eth_header_mcast_prio(struct mlx4_net_trans_rule_hw_ctrl *ctrl,
+ struct _rule_hw *eth_header);
int mlx4_find_cached_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *idx);
int mlx4_find_cached_vlan(struct mlx4_dev *dev, u8 port, u16 vid, int *idx);
int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index);
MLX5_INFINIBAND_PORT_COUNTERS_GROUP = 0x20,
};
-enum {
- MLX5_PCIE_PERFORMANCE_COUNTERS_GROUP = 0x0,
- MLX5_PCIE_TIMERS_AND_STATES_COUNTERS_GROUP = 0x2,
-};
-
static inline u16 mlx5_to_sw_pkey_sz(int pkey_sz)
{
if (pkey_sz > MLX5_MAX_LOG_PKEY_TABLE)
MLX5_REG_HOST_ENDIANNESS = 0x7004,
MLX5_REG_MCIA = 0x9014,
MLX5_REG_MLCR = 0x902b,
- MLX5_REG_MPCNT = 0x9051,
};
enum mlx5_dcbx_oper_mode {
u8 reserved_at_4c0[0x300];
};
-struct mlx5_ifc_pcie_perf_cntrs_grp_data_layout_bits {
- u8 life_time_counter_high[0x20];
-
- u8 life_time_counter_low[0x20];
-
- u8 rx_errors[0x20];
-
- u8 tx_errors[0x20];
-
- u8 l0_to_recovery_eieos[0x20];
-
- u8 l0_to_recovery_ts[0x20];
-
- u8 l0_to_recovery_framing[0x20];
-
- u8 l0_to_recovery_retrain[0x20];
-
- u8 crc_error_dllp[0x20];
-
- u8 crc_error_tlp[0x20];
-
- u8 reserved_at_140[0x680];
-};
-
-struct mlx5_ifc_pcie_tas_cntrs_grp_data_layout_bits {
- u8 life_time_counter_high[0x20];
-
- u8 life_time_counter_low[0x20];
-
- u8 time_to_boot_image_start[0x20];
-
- u8 time_to_link_image[0x20];
-
- u8 calibration_time[0x20];
-
- u8 time_to_first_perst[0x20];
-
- u8 time_to_detect_state[0x20];
-
- u8 time_to_l0[0x20];
-
- u8 time_to_crs_en[0x20];
-
- u8 time_to_plastic_image_start[0x20];
-
- u8 time_to_iron_image_start[0x20];
-
- u8 perst_handler[0x20];
-
- u8 times_in_l1[0x20];
-
- u8 times_in_l23[0x20];
-
- u8 dl_down[0x20];
-
- u8 config_cycle1usec[0x20];
-
- u8 config_cycle2to7usec[0x20];
-
- u8 config_cycle_8to15usec[0x20];
-
- u8 config_cycle_16_to_63usec[0x20];
-
- u8 config_cycle_64usec[0x20];
-
- u8 correctable_err_msg_sent[0x20];
-
- u8 non_fatal_err_msg_sent[0x20];
-
- u8 fatal_err_msg_sent[0x20];
-
- u8 reserved_at_2e0[0x4e0];
-};
-
struct mlx5_ifc_cmd_inter_comp_event_bits {
u8 command_completion_vector[0x20];
u8 reserved_at_0[0x7c0];
};
-union mlx5_ifc_pcie_cntrs_grp_data_layout_auto_bits {
- struct mlx5_ifc_pcie_perf_cntrs_grp_data_layout_bits pcie_perf_cntrs_grp_data_layout;
- struct mlx5_ifc_pcie_tas_cntrs_grp_data_layout_bits pcie_tas_cntrs_grp_data_layout;
- u8 reserved_at_0[0x7c0];
-};
-
union mlx5_ifc_event_auto_bits {
struct mlx5_ifc_comp_event_bits comp_event;
struct mlx5_ifc_dct_events_bits dct_events;
union mlx5_ifc_eth_cntrs_grp_data_layout_auto_bits counter_set;
};
-struct mlx5_ifc_mpcnt_reg_bits {
- u8 reserved_at_0[0x8];
- u8 pcie_index[0x8];
- u8 reserved_at_10[0xa];
- u8 grp[0x6];
-
- u8 clr[0x1];
- u8 reserved_at_21[0x1f];
-
- union mlx5_ifc_pcie_cntrs_grp_data_layout_auto_bits counter_set;
-};
-
struct mlx5_ifc_ppad_reg_bits {
u8 reserved_at_0[0x3];
u8 single_mac[0x1];
struct mlx5_ifc_pmtu_reg_bits pmtu_reg;
struct mlx5_ifc_ppad_reg_bits ppad_reg;
struct mlx5_ifc_ppcnt_reg_bits ppcnt_reg;
- struct mlx5_ifc_mpcnt_reg_bits mpcnt_reg;
struct mlx5_ifc_pplm_reg_bits pplm_reg;
struct mlx5_ifc_pplr_reg_bits pplr_reg;
struct mlx5_ifc_ppsc_reg_bits ppsc_reg;
*/
enum pageflags {
PG_locked, /* Page is locked. Don't touch. */
- PG_waiters, /* Page has waiters, check its waitqueue */
PG_error,
PG_referenced,
PG_uptodate,
PG_dirty,
PG_lru,
PG_active,
+ PG_waiters, /* Page has waiters, check its waitqueue. Must be bit #7 and in the same byte as "PG_locked" */
PG_slab,
PG_owner_priv_1, /* Owner use. If pagecache, fs may use*/
PG_arch_1,
void radix_tree_replace_slot(struct radix_tree_root *root,
void **slot, void *item);
void __radix_tree_delete_node(struct radix_tree_root *root,
- struct radix_tree_node *node);
+ struct radix_tree_node *node,
+ radix_tree_update_node_t update_node,
+ void *private);
void *radix_tree_delete_item(struct radix_tree_root *, unsigned long, void *);
void *radix_tree_delete(struct radix_tree_root *, unsigned long);
void radix_tree_clear_tags(struct radix_tree_root *root,
struct page;
struct scatterlist;
-extern int swiotlb_force;
+enum swiotlb_force {
+ SWIOTLB_NORMAL, /* Default - depending on HW DMA mask etc. */
+ SWIOTLB_FORCE, /* swiotlb=force */
+ SWIOTLB_NO_FORCE, /* swiotlb=noforce */
+};
+
+extern enum swiotlb_force swiotlb_force;
/*
* Maximum allowable number of contiguous slabs to map,
#ifdef CONFIG_SWIOTLB
extern void __init swiotlb_free(void);
+unsigned int swiotlb_max_segment(void);
#else
static inline void swiotlb_free(void) { }
+static inline unsigned int swiotlb_max_segment(void) { return 0; }
#endif
extern void swiotlb_print_info(void);
extern int is_swiotlb_buffer(phys_addr_t paddr);
+extern void swiotlb_set_max_segment(unsigned int);
#endif /* __LINUX_SWIOTLB_H */
int sysctl_tcp_orphan_retries;
int sysctl_tcp_fin_timeout;
unsigned int sysctl_tcp_notsent_lowat;
+ int sysctl_tcp_tw_reuse;
int sysctl_igmp_max_memberships;
int sysctl_igmp_max_msf;
extern int sysctl_tcp_rmem[3];
extern int sysctl_tcp_app_win;
extern int sysctl_tcp_adv_win_scale;
-extern int sysctl_tcp_tw_reuse;
extern int sysctl_tcp_frto;
extern int sysctl_tcp_low_latency;
extern int sysctl_tcp_nometrics_save;
TP_PROTO(struct device *dev,
dma_addr_t dev_addr,
size_t size,
- int swiotlb_force),
+ enum swiotlb_force swiotlb_force),
TP_ARGS(dev, dev_addr, size, swiotlb_force),
TP_STRUCT__entry(
- __string( dev_name, dev_name(dev) )
- __field( u64, dma_mask )
- __field( dma_addr_t, dev_addr )
- __field( size_t, size )
- __field( int, swiotlb_force )
+ __string( dev_name, dev_name(dev) )
+ __field( u64, dma_mask )
+ __field( dma_addr_t, dev_addr )
+ __field( size_t, size )
+ __field( enum swiotlb_force, swiotlb_force )
),
TP_fast_assign(
__entry->dma_mask,
(unsigned long long)__entry->dev_addr,
__entry->size,
- __entry->swiotlb_force ? "swiotlb_force" : "" )
+ __print_symbolic(__entry->swiotlb_force,
+ { SWIOTLB_NORMAL, "NORMAL" },
+ { SWIOTLB_FORCE, "FORCE" },
+ { SWIOTLB_NO_FORCE, "NO_FORCE" }))
);
#endif /* _TRACE_SWIOTLB_H */
* | 0 | magic | LE32 | FUNCTIONFS_DESCRIPTORS_MAGIC_V2 |
* | 4 | length | LE32 | length of the whole data chunk |
* | 8 | flags | LE32 | combination of functionfs_flags |
+ * | | eventfd | LE32 | eventfd file descriptor |
* | | fs_count | LE32 | number of full-speed descriptors |
* | | hs_count | LE32 | number of high-speed descriptors |
* | | ss_count | LE32 | number of super-speed descriptors |
if (size)
new = alloc_chunk(size);
+ mutex_lock(&entry->group->mark_mutex);
spin_lock(&entry->lock);
if (chunk->dead || !entry->inode) {
spin_unlock(&entry->lock);
+ mutex_unlock(&entry->group->mark_mutex);
if (new)
free_chunk(new);
goto out;
list_del_rcu(&chunk->hash);
spin_unlock(&hash_lock);
spin_unlock(&entry->lock);
+ mutex_unlock(&entry->group->mark_mutex);
fsnotify_destroy_mark(entry, audit_tree_group);
goto out;
}
if (!new)
goto Fallback;
- fsnotify_duplicate_mark(&new->mark, entry);
- if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.inode, NULL, 1)) {
+ if (fsnotify_add_mark_locked(&new->mark, entry->group, entry->inode,
+ NULL, 1)) {
fsnotify_put_mark(&new->mark);
goto Fallback;
}
owner->root = new;
spin_unlock(&hash_lock);
spin_unlock(&entry->lock);
+ mutex_unlock(&entry->group->mark_mutex);
fsnotify_destroy_mark(entry, audit_tree_group);
fsnotify_put_mark(&new->mark); /* drop initial reference */
goto out;
put_tree(owner);
spin_unlock(&hash_lock);
spin_unlock(&entry->lock);
+ mutex_unlock(&entry->group->mark_mutex);
out:
fsnotify_put_mark(entry);
spin_lock(&hash_lock);
chunk_entry = &chunk->mark;
+ mutex_lock(&old_entry->group->mark_mutex);
spin_lock(&old_entry->lock);
if (!old_entry->inode) {
/* old_entry is being shot, lets just lie */
spin_unlock(&old_entry->lock);
+ mutex_unlock(&old_entry->group->mark_mutex);
fsnotify_put_mark(old_entry);
free_chunk(chunk);
return -ENOENT;
}
- fsnotify_duplicate_mark(chunk_entry, old_entry);
- if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->inode, NULL, 1)) {
+ if (fsnotify_add_mark_locked(chunk_entry, old_entry->group,
+ old_entry->inode, NULL, 1)) {
spin_unlock(&old_entry->lock);
+ mutex_unlock(&old_entry->group->mark_mutex);
fsnotify_put_mark(chunk_entry);
fsnotify_put_mark(old_entry);
return -ENOSPC;
chunk->dead = 1;
spin_unlock(&chunk_entry->lock);
spin_unlock(&old_entry->lock);
+ mutex_unlock(&old_entry->group->mark_mutex);
fsnotify_destroy_mark(chunk_entry, audit_tree_group);
spin_unlock(&hash_lock);
spin_unlock(&chunk_entry->lock);
spin_unlock(&old_entry->lock);
+ mutex_unlock(&old_entry->group->mark_mutex);
fsnotify_destroy_mark(old_entry, audit_tree_group);
fsnotify_put_mark(chunk_entry); /* drop initial reference */
fsnotify_put_mark(old_entry); /* pair to fsnotify_find mark_entry */
bool multi_instance)
{
int cpu, ret = 0;
+ bool dynstate;
if (cpuhp_cb_check(state) || !name)
return -EINVAL;
ret = cpuhp_store_callbacks(state, name, startup, teardown,
multi_instance);
+ dynstate = state == CPUHP_AP_ONLINE_DYN;
+ if (ret > 0 && dynstate) {
+ state = ret;
+ ret = 0;
+ }
+
if (ret || !invoke || !startup)
goto out;
* If the requested state is CPUHP_AP_ONLINE_DYN, return the
* dynamically allocated state in case of success.
*/
- if (!ret && state == CPUHP_AP_ONLINE_DYN)
+ if (!ret && dynstate)
return state;
return ret;
}
update_node(node, private);
}
+ WARN_ON_ONCE(!list_empty(&node->private_list));
radix_tree_node_free(node);
}
}
root->rnode = NULL;
}
+ WARN_ON_ONCE(!list_empty(&node->private_list));
radix_tree_node_free(node);
node = parent;
struct radix_tree_node *old = child;
offset = child->offset + 1;
child = child->parent;
+ WARN_ON_ONCE(!list_empty(&node->private_list));
radix_tree_node_free(old);
if (old == entry_to_node(node))
return;
* __radix_tree_delete_node - try to free node after clearing a slot
* @root: radix tree root
* @node: node containing @index
+ * @update_node: callback for changing leaf nodes
+ * @private: private data to pass to @update_node
*
* After clearing the slot at @index in @node from radix tree
* rooted at @root, call this function to attempt freeing the
* node and shrinking the tree.
*/
void __radix_tree_delete_node(struct radix_tree_root *root,
- struct radix_tree_node *node)
+ struct radix_tree_node *node,
+ radix_tree_update_node_t update_node,
+ void *private)
{
- delete_node(root, node, NULL, NULL);
+ delete_node(root, node, update_node, private);
}
/**
*/
#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
-int swiotlb_force;
+enum swiotlb_force swiotlb_force;
/*
* Used to do a quick range check in swiotlb_tbl_unmap_single and
static unsigned int *io_tlb_list;
static unsigned int io_tlb_index;
+/*
+ * Max segment that we can provide which (if pages are contingous) will
+ * not be bounced (unless SWIOTLB_FORCE is set).
+ */
+unsigned int max_segment;
+
/*
* We need to save away the original address corresponding to a mapped entry
* for the sync operations.
}
if (*str == ',')
++str;
- if (!strcmp(str, "force"))
- swiotlb_force = 1;
+ if (!strcmp(str, "force")) {
+ swiotlb_force = SWIOTLB_FORCE;
+ } else if (!strcmp(str, "noforce")) {
+ swiotlb_force = SWIOTLB_NO_FORCE;
+ io_tlb_nslabs = 1;
+ }
return 0;
}
}
EXPORT_SYMBOL_GPL(swiotlb_nr_tbl);
+unsigned int swiotlb_max_segment(void)
+{
+ return max_segment;
+}
+EXPORT_SYMBOL_GPL(swiotlb_max_segment);
+
+void swiotlb_set_max_segment(unsigned int val)
+{
+ if (swiotlb_force == SWIOTLB_FORCE)
+ max_segment = 1;
+ else
+ max_segment = rounddown(val, PAGE_SIZE);
+}
+
/* default to 64MB */
#define IO_TLB_DEFAULT_SIZE (64UL<<20)
unsigned long swiotlb_size_or_default(void)
if (verbose)
swiotlb_print_info();
+ swiotlb_set_max_segment(io_tlb_nslabs << IO_TLB_SHIFT);
return 0;
}
rc = swiotlb_late_init_with_tbl(vstart, io_tlb_nslabs);
if (rc)
free_pages((unsigned long)vstart, order);
+
return rc;
}
late_alloc = 1;
+ swiotlb_set_max_segment(io_tlb_nslabs << IO_TLB_SHIFT);
+
return 0;
cleanup4:
io_tlb_end = 0;
io_tlb_start = 0;
io_tlb_nslabs = 0;
+ max_segment = 0;
return -ENOMEM;
}
PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT));
}
io_tlb_nslabs = 0;
+ max_segment = 0;
}
int is_swiotlb_buffer(phys_addr_t paddr)
map_single(struct device *hwdev, phys_addr_t phys, size_t size,
enum dma_data_direction dir, unsigned long attrs)
{
- dma_addr_t start_dma_addr = phys_to_dma(hwdev, io_tlb_start);
+ dma_addr_t start_dma_addr;
+ if (swiotlb_force == SWIOTLB_NO_FORCE) {
+ dev_warn_ratelimited(hwdev, "Cannot do DMA to address %pa\n",
+ &phys);
+ return SWIOTLB_MAP_ERROR;
+ }
+
+ start_dma_addr = phys_to_dma(hwdev, io_tlb_start);
return swiotlb_tbl_map_single(hwdev, start_dma_addr, phys, size,
dir, attrs);
}
swiotlb_full(struct device *dev, size_t size, enum dma_data_direction dir,
int do_panic)
{
+ if (swiotlb_force == SWIOTLB_NO_FORCE)
+ return;
+
/*
* Ran out of IOMMU space for this operation. This is very bad.
* Unfortunately the drivers cannot handle this operation properly.
* we can safely return the device addr and not worry about bounce
* buffering it.
*/
- if (dma_capable(dev, dev_addr, size) && !swiotlb_force)
+ if (dma_capable(dev, dev_addr, size) && swiotlb_force != SWIOTLB_FORCE)
return dev_addr;
trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
phys_addr_t paddr = sg_phys(sg);
dma_addr_t dev_addr = phys_to_dma(hwdev, paddr);
- if (swiotlb_force ||
+ if (swiotlb_force == SWIOTLB_FORCE ||
!dma_capable(hwdev, dev_addr, sg->length)) {
phys_addr_t map = map_single(hwdev, sg_phys(sg),
sg->length, dir, attrs);
}
EXPORT_SYMBOL_GPL(add_page_wait_queue);
+#ifndef clear_bit_unlock_is_negative_byte
+
+/*
+ * PG_waiters is the high bit in the same byte as PG_lock.
+ *
+ * On x86 (and on many other architectures), we can clear PG_lock and
+ * test the sign bit at the same time. But if the architecture does
+ * not support that special operation, we just do this all by hand
+ * instead.
+ *
+ * The read of PG_waiters has to be after (or concurrently with) PG_locked
+ * being cleared, but a memory barrier should be unneccssary since it is
+ * in the same byte as PG_locked.
+ */
+static inline bool clear_bit_unlock_is_negative_byte(long nr, volatile void *mem)
+{
+ clear_bit_unlock(nr, mem);
+ /* smp_mb__after_atomic(); */
+ return test_bit(PG_waiters, mem);
+}
+
+#endif
+
/**
* unlock_page - unlock a locked page
* @page: the page
* mechanism between PageLocked pages and PageWriteback pages is shared.
* But that's OK - sleepers in wait_on_page_writeback() just go back to sleep.
*
- * The mb is necessary to enforce ordering between the clear_bit and the read
- * of the waitqueue (to avoid SMP races with a parallel wait_on_page_locked()).
+ * Note that this depends on PG_waiters being the sign bit in the byte
+ * that contains PG_locked - thus the BUILD_BUG_ON(). That allows us to
+ * clear the PG_locked bit and test PG_waiters at the same time fairly
+ * portably (architectures that do LL/SC can test any bit, while x86 can
+ * test the sign bit).
*/
void unlock_page(struct page *page)
{
+ BUILD_BUG_ON(PG_waiters != 7);
page = compound_head(page);
VM_BUG_ON_PAGE(!PageLocked(page), page);
- clear_bit_unlock(PG_locked, &page->flags);
- smp_mb__after_atomic();
- wake_up_page(page, PG_locked);
+ if (clear_bit_unlock_is_negative_byte(PG_locked, &page->flags))
+ wake_up_page_bit(page, PG_locked);
}
EXPORT_SYMBOL(unlock_page);
ret = 0;
count_vm_event(THP_FILE_MAPPED);
out:
- /*
- * If we are going to fallback to pte mapping, do a
- * withdraw with pmd lock held.
- */
- if (arch_needs_pgtable_deposit() && ret == VM_FAULT_FALLBACK)
- vmf->prealloc_pte = pgtable_trans_huge_withdraw(vma->vm_mm,
- vmf->pmd);
spin_unlock(vmf->ptl);
return ret;
}
ret = do_set_pmd(vmf, page);
if (ret != VM_FAULT_FALLBACK)
- goto fault_handled;
+ return ret;
}
if (!vmf->pte) {
ret = pte_alloc_one_map(vmf);
if (ret)
- goto fault_handled;
+ return ret;
}
/* Re-check under ptl */
- if (unlikely(!pte_none(*vmf->pte))) {
- ret = VM_FAULT_NOPAGE;
- goto fault_handled;
- }
+ if (unlikely(!pte_none(*vmf->pte)))
+ return VM_FAULT_NOPAGE;
flush_icache_page(vma, page);
entry = mk_pte(page, vma->vm_page_prot);
/* no need to invalidate: a not-present page won't be cached */
update_mmu_cache(vma, vmf->address, vmf->pte);
- ret = 0;
-fault_handled:
- /* preallocated pagetable is unused: free it */
- if (vmf->prealloc_pte) {
- pte_free(vmf->vma->vm_mm, vmf->prealloc_pte);
- vmf->prealloc_pte = 0;
- }
- return ret;
+ return 0;
}
static int do_fault(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
+ int ret;
/* The VMA was not fully populated on mmap() or missing VM_DONTEXPAND */
if (!vma->vm_ops->fault)
- return VM_FAULT_SIGBUS;
- if (!(vmf->flags & FAULT_FLAG_WRITE))
- return do_read_fault(vmf);
- if (!(vma->vm_flags & VM_SHARED))
- return do_cow_fault(vmf);
- return do_shared_fault(vmf);
+ ret = VM_FAULT_SIGBUS;
+ else if (!(vmf->flags & FAULT_FLAG_WRITE))
+ ret = do_read_fault(vmf);
+ else if (!(vma->vm_flags & VM_SHARED))
+ ret = do_cow_fault(vmf);
+ else
+ ret = do_shared_fault(vmf);
+
+ /* preallocated pagetable is unused: free it */
+ if (vmf->prealloc_pte) {
+ pte_free(vma->vm_mm, vmf->prealloc_pte);
+ vmf->prealloc_pte = 0;
+ }
+ return ret;
}
static int numa_migrate_prep(struct page *page, struct vm_area_struct *vma,
#include <linux/rmap.h>
#include "internal.h"
-static void clear_exceptional_entry(struct address_space *mapping,
- pgoff_t index, void *entry)
+static void clear_shadow_entry(struct address_space *mapping, pgoff_t index,
+ void *entry)
{
struct radix_tree_node *node;
void **slot;
- /* Handled by shmem itself */
- if (shmem_mapping(mapping))
- return;
-
- if (dax_mapping(mapping)) {
- dax_delete_mapping_entry(mapping, index);
- return;
- }
spin_lock_irq(&mapping->tree_lock);
/*
* Regular page slots are stabilized by the page lock even
spin_unlock_irq(&mapping->tree_lock);
}
+/*
+ * Unconditionally remove exceptional entry. Usually called from truncate path.
+ */
+static void truncate_exceptional_entry(struct address_space *mapping,
+ pgoff_t index, void *entry)
+{
+ /* Handled by shmem itself */
+ if (shmem_mapping(mapping))
+ return;
+
+ if (dax_mapping(mapping)) {
+ dax_delete_mapping_entry(mapping, index);
+ return;
+ }
+ clear_shadow_entry(mapping, index, entry);
+}
+
+/*
+ * Invalidate exceptional entry if easily possible. This handles exceptional
+ * entries for invalidate_inode_pages() so for DAX it evicts only unlocked and
+ * clean entries.
+ */
+static int invalidate_exceptional_entry(struct address_space *mapping,
+ pgoff_t index, void *entry)
+{
+ /* Handled by shmem itself */
+ if (shmem_mapping(mapping))
+ return 1;
+ if (dax_mapping(mapping))
+ return dax_invalidate_mapping_entry(mapping, index);
+ clear_shadow_entry(mapping, index, entry);
+ return 1;
+}
+
+/*
+ * Invalidate exceptional entry if clean. This handles exceptional entries for
+ * invalidate_inode_pages2() so for DAX it evicts only clean entries.
+ */
+static int invalidate_exceptional_entry2(struct address_space *mapping,
+ pgoff_t index, void *entry)
+{
+ /* Handled by shmem itself */
+ if (shmem_mapping(mapping))
+ return 1;
+ if (dax_mapping(mapping))
+ return dax_invalidate_mapping_entry_sync(mapping, index);
+ clear_shadow_entry(mapping, index, entry);
+ return 1;
+}
+
/**
* do_invalidatepage - invalidate part or all of a page
* @page: the page which is affected
break;
if (radix_tree_exceptional_entry(page)) {
- clear_exceptional_entry(mapping, index, page);
+ truncate_exceptional_entry(mapping, index,
+ page);
continue;
}
}
if (radix_tree_exceptional_entry(page)) {
- clear_exceptional_entry(mapping, index, page);
+ truncate_exceptional_entry(mapping, index,
+ page);
continue;
}
break;
if (radix_tree_exceptional_entry(page)) {
- clear_exceptional_entry(mapping, index, page);
+ invalidate_exceptional_entry(mapping, index,
+ page);
continue;
}
break;
if (radix_tree_exceptional_entry(page)) {
- clear_exceptional_entry(mapping, index, page);
+ if (!invalidate_exceptional_entry2(mapping,
+ index, page))
+ ret = -EBUSY;
continue;
}
if (WARN_ON_ONCE(node->exceptional))
goto out_invalid;
inc_node_state(page_pgdat(virt_to_page(node)), WORKINGSET_NODERECLAIM);
- __radix_tree_delete_node(&mapping->page_tree, node);
+ __radix_tree_delete_node(&mapping->page_tree, node,
+ workingset_update_node, mapping);
out_invalid:
spin_unlock(&mapping->tree_lock);
{
int i;
+#ifdef CONFIG_PROC_FS
remove_proc_entry("lec", atm_proc_root);
+#endif
deregister_atm_ioctl(&lane_ioctl_ops);
struct nlattr *nla;
struct sk_buff *skb;
unsigned long flags;
+ void *msg_header;
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
skb = genlmsg_new(al, GFP_KERNEL);
- if (skb) {
- genlmsg_put(skb, 0, 0, &net_drop_monitor_family,
- 0, NET_DM_CMD_ALERT);
- nla = nla_reserve(skb, NLA_UNSPEC,
- sizeof(struct net_dm_alert_msg));
- msg = nla_data(nla);
- memset(msg, 0, al);
- } else {
- mod_timer(&data->send_timer, jiffies + HZ / 10);
+ if (!skb)
+ goto err;
+
+ msg_header = genlmsg_put(skb, 0, 0, &net_drop_monitor_family,
+ 0, NET_DM_CMD_ALERT);
+ if (!msg_header) {
+ nlmsg_free(skb);
+ skb = NULL;
+ goto err;
+ }
+ nla = nla_reserve(skb, NLA_UNSPEC,
+ sizeof(struct net_dm_alert_msg));
+ if (!nla) {
+ nlmsg_free(skb);
+ skb = NULL;
+ goto err;
}
+ msg = nla_data(nla);
+ memset(msg, 0, al);
+ goto out;
+err:
+ mod_timer(&data->send_timer, jiffies + HZ / 10);
+out:
spin_lock_irqsave(&data->lock, flags);
swap(data->skb, skb);
spin_unlock_irqrestore(&data->lock, flags);
+ if (skb) {
+ struct nlmsghdr *nlh = (struct nlmsghdr *)skb->data;
+ struct genlmsghdr *gnlh = (struct genlmsghdr *)nlmsg_data(nlh);
+
+ genlmsg_end(skb, genlmsg_data(gnlh));
+ }
+
return skb;
}
}
EXPORT_SYMBOL_GPL(bpf_warn_invalid_xdp_action);
-void bpf_warn_invalid_xdp_buffer(void)
-{
- WARN_ONCE(1, "Illegal XDP buffer encountered, expect throughput degradation\n");
-}
-EXPORT_SYMBOL_GPL(bpf_warn_invalid_xdp_buffer);
-
static u32 sk_filter_convert_ctx_access(enum bpf_access_type type, int dst_reg,
int src_reg, int ctx_off,
struct bpf_insn *insn_buf,
if (hdr->flags & GRE_ACK)
offset += sizeof(((struct pptp_gre_header *)0)->ack);
- ppp_hdr = skb_header_pointer(skb, nhoff + offset,
- sizeof(_ppp_hdr), _ppp_hdr);
+ ppp_hdr = __skb_header_pointer(skb, nhoff + offset,
+ sizeof(_ppp_hdr),
+ data, hlen, _ppp_hdr);
if (!ppp_hdr)
goto out_bad;
u32 filter_mask;
int err;
+ if (nlmsg_len(nlh) < sizeof(*ifsm))
+ return -EINVAL;
+
ifsm = nlmsg_data(nlh);
if (ifsm->ifindex > 0)
dev = __dev_get_by_index(net, ifsm->ifindex);
cb->seq = net->dev_base_seq;
+ if (nlmsg_len(cb->nlh) < sizeof(*ifsm))
+ return -EINVAL;
+
ifsm = nlmsg_data(cb->nlh);
filter_mask = ifsm->filter_mask;
if (!filter_mask)
if (tb)
return tb;
- if (id == RT_TABLE_LOCAL)
+ if (id == RT_TABLE_LOCAL && !net->ipv4.fib_has_custom_rules)
alias = fib_new_table(net, RT_TABLE_MAIN);
tb = fib_trie_table(id, alias);
static void igmp_gq_start_timer(struct in_device *in_dev)
{
int tv = prandom_u32() % in_dev->mr_maxdelay;
+ unsigned long exp = jiffies + tv + 2;
+
+ if (in_dev->mr_gq_running &&
+ time_after_eq(exp, (in_dev->mr_gq_timer).expires))
+ return;
in_dev->mr_gq_running = 1;
- if (!mod_timer(&in_dev->mr_gq_timer, jiffies+tv+2))
+ if (!mod_timer(&in_dev->mr_gq_timer, exp))
in_dev_hold(in_dev);
}
* which has interface index (iif) as the first member of the
* underlying inet{6}_skb_parm struct. This code then overlays
* PKTINFO_SKB_CB and in_pktinfo also has iif as the first
- * element so the iif is picked up from the prior IPCB
+ * element so the iif is picked up from the prior IPCB. If iif
+ * is the loopback interface, then return the sending interface
+ * (e.g., process binds socket to eth0 for Tx which is
+ * redirected to loopback in the rtable/dst).
*/
+ if (pktinfo->ipi_ifindex == LOOPBACK_IFINDEX)
+ pktinfo->ipi_ifindex = inet_iif(skb);
+
pktinfo->ipi_spec_dst.s_addr = fib_compute_spec_dst(skb);
} else {
pktinfo->ipi_ifindex = 0;
}
}
- rth = rt_dst_alloc(net->loopback_dev, flags | RTCF_LOCAL, res.type,
+ rth = rt_dst_alloc(l3mdev_master_dev_rcu(dev) ? : net->loopback_dev,
+ flags | RTCF_LOCAL, res.type,
IN_DEV_CONF_GET(in_dev, NOPOLICY), false, do_cache);
if (!rth)
goto e_nobufs;
.extra1 = &tcp_adv_win_scale_min,
.extra2 = &tcp_adv_win_scale_max,
},
- {
- .procname = "tcp_tw_reuse",
- .data = &sysctl_tcp_tw_reuse,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec
- },
{
.procname = "tcp_frto",
.data = &sysctl_tcp_frto,
.mode = 0644,
.proc_handler = proc_dointvec,
},
+ {
+ .procname = "tcp_tw_reuse",
+ .data = &init_net.ipv4.sysctl_tcp_tw_reuse,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec
+ },
#ifdef CONFIG_IP_ROUTE_MULTIPATH
{
.procname = "fib_multipath_use_neigh",
#include <crypto/hash.h>
#include <linux/scatterlist.h>
-int sysctl_tcp_tw_reuse __read_mostly;
int sysctl_tcp_low_latency __read_mostly;
#ifdef CONFIG_TCP_MD5SIG
and use initial timestamp retrieved from peer table.
*/
if (tcptw->tw_ts_recent_stamp &&
- (!twp || (sysctl_tcp_tw_reuse &&
+ (!twp || (sock_net(sk)->ipv4.sysctl_tcp_tw_reuse &&
get_seconds() - tcptw->tw_ts_recent_stamp > 1))) {
tp->write_seq = tcptw->tw_snd_nxt + 65535 + 2;
if (tp->write_seq == 0)
net->ipv4.sysctl_tcp_orphan_retries = 0;
net->ipv4.sysctl_tcp_fin_timeout = TCP_FIN_TIMEOUT;
net->ipv4.sysctl_tcp_notsent_lowat = UINT_MAX;
+ net->ipv4.sysctl_tcp_tw_reuse = 0;
return 0;
fail:
*/
cork->length += length;
- if (((length > mtu) ||
+ if ((((length + fragheaderlen) > mtu) ||
(skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len &&
return (struct l2tp_ip_sock *)sk;
}
-static struct sock *__l2tp_ip_bind_lookup(struct net *net, __be32 laddr, int dif, u32 tunnel_id)
+static struct sock *__l2tp_ip_bind_lookup(const struct net *net, __be32 laddr,
+ __be32 raddr, int dif, u32 tunnel_id)
{
struct sock *sk;
if ((l2tp->conn_id == tunnel_id) &&
net_eq(sock_net(sk), net) &&
!(inet->inet_rcv_saddr && inet->inet_rcv_saddr != laddr) &&
+ (!inet->inet_daddr || !raddr || inet->inet_daddr == raddr) &&
(!sk->sk_bound_dev_if || !dif ||
sk->sk_bound_dev_if == dif))
goto found;
return sk;
}
-static inline struct sock *l2tp_ip_bind_lookup(struct net *net, __be32 laddr, int dif, u32 tunnel_id)
-{
- struct sock *sk = __l2tp_ip_bind_lookup(net, laddr, dif, tunnel_id);
- if (sk)
- sock_hold(sk);
-
- return sk;
-}
-
/* When processing receive frames, there are two cases to
* consider. Data frames consist of a non-zero session-id and an
* optional cookie. Control frames consist of a regular L2TP header
struct iphdr *iph = (struct iphdr *) skb_network_header(skb);
read_lock_bh(&l2tp_ip_lock);
- sk = __l2tp_ip_bind_lookup(net, iph->daddr, inet_iif(skb),
- tunnel_id);
+ sk = __l2tp_ip_bind_lookup(net, iph->daddr, iph->saddr,
+ inet_iif(skb), tunnel_id);
if (!sk) {
read_unlock_bh(&l2tp_ip_lock);
goto discard;
inet->inet_saddr = 0; /* Use device */
write_lock_bh(&l2tp_ip_lock);
- if (__l2tp_ip_bind_lookup(net, addr->l2tp_addr.s_addr,
+ if (__l2tp_ip_bind_lookup(net, addr->l2tp_addr.s_addr, 0,
sk->sk_bound_dev_if, addr->l2tp_conn_id)) {
write_unlock_bh(&l2tp_ip_lock);
ret = -EADDRINUSE;
static struct sock *__l2tp_ip6_bind_lookup(struct net *net,
struct in6_addr *laddr,
+ const struct in6_addr *raddr,
int dif, u32 tunnel_id)
{
struct sock *sk;
sk_for_each_bound(sk, &l2tp_ip6_bind_table) {
- const struct in6_addr *addr = inet6_rcv_saddr(sk);
+ const struct in6_addr *sk_laddr = inet6_rcv_saddr(sk);
+ const struct in6_addr *sk_raddr = &sk->sk_v6_daddr;
struct l2tp_ip6_sock *l2tp = l2tp_ip6_sk(sk);
if (l2tp == NULL)
if ((l2tp->conn_id == tunnel_id) &&
net_eq(sock_net(sk), net) &&
- (!addr || ipv6_addr_equal(addr, laddr)) &&
+ (!sk_laddr || ipv6_addr_any(sk_laddr) || ipv6_addr_equal(sk_laddr, laddr)) &&
+ (!raddr || ipv6_addr_any(sk_raddr) || ipv6_addr_equal(sk_raddr, raddr)) &&
(!sk->sk_bound_dev_if || !dif ||
sk->sk_bound_dev_if == dif))
goto found;
return sk;
}
-static inline struct sock *l2tp_ip6_bind_lookup(struct net *net,
- struct in6_addr *laddr,
- int dif, u32 tunnel_id)
-{
- struct sock *sk = __l2tp_ip6_bind_lookup(net, laddr, dif, tunnel_id);
- if (sk)
- sock_hold(sk);
-
- return sk;
-}
-
/* When processing receive frames, there are two cases to
* consider. Data frames consist of a non-zero session-id and an
* optional cookie. Control frames consist of a regular L2TP header
struct ipv6hdr *iph = ipv6_hdr(skb);
read_lock_bh(&l2tp_ip6_lock);
- sk = __l2tp_ip6_bind_lookup(net, &iph->daddr, inet6_iif(skb),
- tunnel_id);
+ sk = __l2tp_ip6_bind_lookup(net, &iph->daddr, &iph->saddr,
+ inet6_iif(skb), tunnel_id);
if (!sk) {
read_unlock_bh(&l2tp_ip6_lock);
goto discard;
rcu_read_unlock();
write_lock_bh(&l2tp_ip6_lock);
- if (__l2tp_ip6_bind_lookup(net, &addr->l2tp_addr, bound_dev_if,
+ if (__l2tp_ip6_bind_lookup(net, &addr->l2tp_addr, NULL, bound_dev_if,
addr->l2tp_conn_id)) {
write_unlock_bh(&l2tp_ip6_lock);
err = -EADDRINUSE;
int extra_head = fast_tx->hdr_len - (ETH_HLEN - 2);
int hw_headroom = sdata->local->hw.extra_tx_headroom;
struct ethhdr eth;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_tx_info *info;
struct ieee80211_hdr *hdr = (void *)fast_tx->hdr;
struct ieee80211_tx_data tx;
ieee80211_tx_result r;
memcpy(skb->data + fast_tx->da_offs, eth.h_dest, ETH_ALEN);
memcpy(skb->data + fast_tx->sa_offs, eth.h_source, ETH_ALEN);
+ info = IEEE80211_SKB_CB(skb);
memset(info, 0, sizeof(*info));
info->band = fast_tx->band;
info->control.vif = &sdata->vif;
rcu_assign_pointer(flow->sf_acts, acts);
packet->priority = flow->key.phy.priority;
packet->mark = flow->key.phy.skb_mark;
- packet->protocol = flow->key.eth.type;
rcu_read_lock();
dp = get_dp_rcu(net, ovs_header->dp_ifindex);
* Returns 0 if it encounters a non-vlan or incomplete packet.
* Returns 1 after successfully parsing vlan tag.
*/
-static int parse_vlan_tag(struct sk_buff *skb, struct vlan_head *key_vh)
+static int parse_vlan_tag(struct sk_buff *skb, struct vlan_head *key_vh,
+ bool untag_vlan)
{
struct vlan_head *vh = (struct vlan_head *)skb->data;
key_vh->tci = vh->tci | htons(VLAN_TAG_PRESENT);
key_vh->tpid = vh->tpid;
- __skb_pull(skb, sizeof(struct vlan_head));
+ if (unlikely(untag_vlan)) {
+ int offset = skb->data - skb_mac_header(skb);
+ u16 tci;
+ int err;
+
+ __skb_push(skb, offset);
+ err = __skb_vlan_pop(skb, &tci);
+ __skb_pull(skb, offset);
+ if (err)
+ return err;
+ __vlan_hwaccel_put_tag(skb, key_vh->tpid, tci);
+ } else {
+ __skb_pull(skb, sizeof(struct vlan_head));
+ }
return 1;
}
key->eth.vlan.tpid = skb->vlan_proto;
} else {
/* Parse outer vlan tag in the non-accelerated case. */
- res = parse_vlan_tag(skb, &key->eth.vlan);
+ res = parse_vlan_tag(skb, &key->eth.vlan, true);
if (res <= 0)
return res;
}
/* Parse inner vlan tag. */
- res = parse_vlan_tag(skb, &key->eth.cvlan);
+ res = parse_vlan_tag(skb, &key->eth.cvlan, false);
if (res <= 0)
return res;
if (err)
return err;
- if (ovs_key_mac_proto(key) == MAC_PROTO_NONE) {
- /* key_extract assumes that skb->protocol is set-up for
- * layer 3 packets which is the case for other callers,
- * in particular packets recieved from the network stack.
- * Here the correct value can be set from the metadata
- * extracted above.
- */
- skb->protocol = key->eth.type;
- } else {
- struct ethhdr *eth;
-
- skb_reset_mac_header(skb);
- eth = eth_hdr(skb);
-
- /* Normally, setting the skb 'protocol' field would be
- * handled by a call to eth_type_trans(), but it assumes
- * there's a sending device, which we may not have.
- */
- if (eth_proto_is_802_3(eth->h_proto))
- skb->protocol = eth->h_proto;
- else
- skb->protocol = htons(ETH_P_802_2);
- }
+ /* key_extract assumes that skb->protocol is set-up for
+ * layer 3 packets which is the case for other callers,
+ * in particular packets received from the network stack.
+ * Here the correct value can be set from the metadata
+ * extracted above.
+ * For L2 packet key eth type would be zero. skb protocol
+ * would be set to correct value later during key-extact.
+ */
+ skb->protocol = key->eth.type;
return key_extract(skb, key);
}
unsigned long cl;
unsigned long fh;
int err;
- int tp_created = 0;
+ int tp_created;
if ((n->nlmsg_type != RTM_GETTFILTER) &&
!netlink_ns_capable(skb, net->user_ns, CAP_NET_ADMIN))
return -EPERM;
replay:
+ tp_created = 0;
+
err = nlmsg_parse(n, sizeof(*t), tca, TCA_MAX, NULL);
if (err < 0)
return err;
switch (ip_tunnel_info_af(info)) {
case AF_INET:
+ skb_key.enc_control.addr_type =
+ FLOW_DISSECTOR_KEY_IPV4_ADDRS;
skb_key.enc_ipv4.src = key->u.ipv4.src;
skb_key.enc_ipv4.dst = key->u.ipv4.dst;
break;
case AF_INET6:
+ skb_key.enc_control.addr_type =
+ FLOW_DISSECTOR_KEY_IPV6_ADDRS;
skb_key.enc_ipv6.src = key->u.ipv6.src;
skb_key.enc_ipv6.dst = key->u.ipv6.dst;
break;
{
int err = simple_setattr(dentry, iattr);
- if (!err) {
+ if (!err && (iattr->ia_valid & ATTR_UID)) {
struct socket *sock = SOCKET_I(d_inode(dentry));
sock->sk->sk_uid = iattr->ia_uid;
while ((skb = __skb_dequeue(&sk->sk_receive_queue)) != NULL) {
if (TIPC_SKB_CB(skb)->bytes_read) {
kfree_skb(skb);
- } else {
- if (!tipc_sk_type_connectionless(sk) &&
- sk->sk_state != TIPC_DISCONNECTING) {
- tipc_set_sk_state(sk, TIPC_DISCONNECTING);
- tipc_node_remove_conn(net, dnode, tsk->portid);
- }
- tipc_sk_respond(sk, skb, error);
+ continue;
+ }
+ if (!tipc_sk_type_connectionless(sk) &&
+ sk->sk_state != TIPC_DISCONNECTING) {
+ tipc_set_sk_state(sk, TIPC_DISCONNECTING);
+ tipc_node_remove_conn(net, dnode, tsk->portid);
}
+ tipc_sk_respond(sk, skb, error);
}
+
+ if (tipc_sk_type_connectionless(sk))
+ return;
+
if (sk->sk_state != TIPC_DISCONNECTING) {
skb = tipc_msg_create(TIPC_CRITICAL_IMPORTANCE,
TIPC_CONN_MSG, SHORT_H_SIZE, 0, dnode,
tsk->portid, error);
if (skb)
tipc_node_xmit_skb(net, skb, dnode, tsk->portid);
- if (!tipc_sk_type_connectionless(sk)) {
- tipc_node_remove_conn(net, dnode, tsk->portid);
- tipc_set_sk_state(sk, TIPC_DISCONNECTING);
- }
+ tipc_node_remove_conn(net, dnode, tsk->portid);
+ tipc_set_sk_state(sk, TIPC_DISCONNECTING);
}
}
help
Build samples of blackfin gptimers sample module.
+config SAMPLE_VFIO_MDEV_MTTY
+ tristate "Build VFIO mtty example mediated device sample code -- loadable modules only"
+ depends on VFIO_MDEV_DEVICE && m
+ help
+ Build a virtual tty sample driver for use as a VFIO
+ mediated device
+
endif # SAMPLES
obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ trace_events/ livepatch/ \
hw_breakpoint/ kfifo/ kdb/ hidraw/ rpmsg/ seccomp/ \
- configfs/ connector/ v4l/ trace_printk/ blackfin/
+ configfs/ connector/ v4l/ trace_printk/ blackfin/ \
+ vfio-mdev/
-#
-# Makefile for mtty.c file
-#
-KERNEL_DIR:=/lib/modules/$(shell uname -r)/build
-
-obj-m:=mtty.o
-
-modules clean modules_install:
- $(MAKE) -C $(KERNEL_DIR) SUBDIRS=$(PWD) $@
-
-default: modules
-
-module: modules
+obj-$(CONFIG_SAMPLE_VFIO_MDEV_MTTY) += mtty.o
struct mdev_state *mds;
list_for_each_entry(mds, &mdev_devices_list, next) {
- if (uuid_le_cmp(mds->mdev->uuid, uuid) == 0)
+ if (uuid_le_cmp(mdev_uuid(mds->mdev), uuid) == 0)
return mds;
}
pr_err("Serial port %d: Fifo level trigger\n",
index);
#endif
- mtty_trigger_interrupt(mdev_state->mdev->uuid);
+ mtty_trigger_interrupt(
+ mdev_uuid(mdev_state->mdev));
}
} else {
#if defined(DEBUG_INTR)
*/
if (mdev_state->s[index].uart_reg[UART_IER] &
UART_IER_RLSI)
- mtty_trigger_interrupt(mdev_state->mdev->uuid);
+ mtty_trigger_interrupt(
+ mdev_uuid(mdev_state->mdev));
}
mutex_unlock(&mdev_state->rxtx_lock);
break;
pr_err("Serial port %d: IER_THRI write\n",
index);
#endif
- mtty_trigger_interrupt(mdev_state->mdev->uuid);
+ mtty_trigger_interrupt(
+ mdev_uuid(mdev_state->mdev));
}
mutex_unlock(&mdev_state->rxtx_lock);
#if defined(DEBUG_INTR)
pr_err("Serial port %d: MCR_OUT2 write\n", index);
#endif
- mtty_trigger_interrupt(mdev_state->mdev->uuid);
+ mtty_trigger_interrupt(mdev_uuid(mdev_state->mdev));
}
if ((mdev_state->s[index].uart_reg[UART_IER] & UART_IER_MSI) &&
#if defined(DEBUG_INTR)
pr_err("Serial port %d: MCR RTS/DTR write\n", index);
#endif
- mtty_trigger_interrupt(mdev_state->mdev->uuid);
+ mtty_trigger_interrupt(mdev_uuid(mdev_state->mdev));
}
break;
#endif
if (mdev_state->s[index].uart_reg[UART_IER] &
UART_IER_THRI)
- mtty_trigger_interrupt(mdev_state->mdev->uuid);
+ mtty_trigger_interrupt(
+ mdev_uuid(mdev_state->mdev));
}
mutex_unlock(&mdev_state->rxtx_lock);
for (i = 0; i < 2; i++) {
snprintf(name, MTTY_STRING_LEN, "%s-%d",
- dev_driver_string(mdev->parent->dev), i + 1);
+ dev_driver_string(mdev_parent_dev(mdev)), i + 1);
if (!strcmp(kobj->name, name)) {
nr_ports = i + 1;
break;
sample_mdev_dev_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct mdev_device *mdev = to_mdev_device(dev);
-
- if (mdev)
- return sprintf(buf, "This is MDEV %s\n", dev_name(&mdev->dev));
+ if (mdev_from_dev(dev))
+ return sprintf(buf, "This is MDEV %s\n", dev_name(dev));
return sprintf(buf, "\n");
}
NULL,
};
-struct parent_ops mdev_fops = {
+struct mdev_parent_ops mdev_fops = {
.owner = THIS_MODULE,
.dev_attr_groups = mtty_dev_groups,
.mdev_attr_groups = mdev_dev_groups,
if (IS_ERR(mtty_dev.vd_class)) {
pr_err("Error: failed to register mtty_dev class\n");
+ ret = PTR_ERR(mtty_dev.vd_class);
goto failed1;
}
if (ret)
goto failed2;
- if (mdev_register_device(&mtty_dev.dev, &mdev_fops) != 0)
+ ret = mdev_register_device(&mtty_dev.dev, &mdev_fops);
+ if (ret)
goto failed3;
mutex_init(&mdev_list_lock);
#include "hash-map.h"
#endif
+#if BUILDING_GCC_VERSION >= 7000
+#include "memmodel.h"
+#endif
#include "emit-rtl.h"
#include "debug.h"
#include "target.h"
#include "tree-ssa-alias.h"
#include "tree-ssa.h"
#include "stringpool.h"
+#if BUILDING_GCC_VERSION >= 7000
+#include "tree-vrp.h"
+#endif
#include "tree-ssanames.h"
#include "print-tree.h"
#include "tree-eh.h"
return NULL;
}
+static inline bool cgraph_for_node_and_aliases(cgraph_node_ptr node, bool (*callback)(cgraph_node_ptr, void *), void *data, bool include_overwritable)
+{
+ cgraph_node_ptr alias;
+
+ if (callback(node, data))
+ return true;
+
+ for (alias = node->same_body; alias; alias = alias->next) {
+ if (include_overwritable || cgraph_function_body_availability(alias) > AVAIL_OVERWRITABLE)
+ if (cgraph_for_node_and_aliases(alias, callback, data, include_overwritable))
+ return true;
+ }
+
+ return false;
+}
+
#define FOR_EACH_FUNCTION_WITH_GIMPLE_BODY(node) \
for ((node) = cgraph_first_function_with_gimple_body(); (node); \
(node) = cgraph_next_function_with_gimple_body(node))
typedef union gimple_statement_d gcall;
typedef union gimple_statement_d gcond;
typedef union gimple_statement_d gdebug;
+typedef union gimple_statement_d ggoto;
typedef union gimple_statement_d gphi;
typedef union gimple_statement_d greturn;
return stmt;
}
+static inline ggoto *as_a_ggoto(gimple stmt)
+{
+ return stmt;
+}
+
+static inline const ggoto *as_a_const_ggoto(const_gimple stmt)
+{
+ return stmt;
+}
+
static inline gphi *as_a_gphi(gimple stmt)
{
return stmt;
typedef struct rtx_def rtx_insn;
+static inline const char *get_decl_section_name(const_tree decl)
+{
+ if (DECL_SECTION_NAME(decl) == NULL_TREE)
+ return NULL;
+
+ return TREE_STRING_POINTER(DECL_SECTION_NAME(decl));
+}
+
static inline void set_decl_section_name(tree node, const char *value)
{
if (value)
typedef struct gimple_statement_call gcall;
typedef struct gimple_statement_base gcond;
typedef struct gimple_statement_base gdebug;
+typedef struct gimple_statement_base ggoto;
typedef struct gimple_statement_phi gphi;
typedef struct gimple_statement_base greturn;
return stmt;
}
+static inline ggoto *as_a_ggoto(gimple stmt)
+{
+ return stmt;
+}
+
+static inline const ggoto *as_a_const_ggoto(const_gimple stmt)
+{
+ return stmt;
+}
+
static inline gphi *as_a_gphi(gimple stmt)
{
return as_a<gphi>(stmt);
#define INSN_DELETED_P(insn) (insn)->deleted()
+static inline const char *get_decl_section_name(const_tree decl)
+{
+ return DECL_SECTION_NAME(decl);
+}
+
/* symtab/cgraph related */
#define debug_cgraph_node(node) (node)->debug()
#define cgraph_get_node(decl) cgraph_node::get(decl)
#define cgraph_n_nodes symtab->cgraph_count
#define cgraph_max_uid symtab->cgraph_max_uid
#define varpool_get_node(decl) varpool_node::get(decl)
+#define dump_varpool_node(file, node) (node)->dump(file)
#define cgraph_create_edge(caller, callee, call_stmt, count, freq, nest) \
(caller)->create_edge((callee), (call_stmt), (count), (freq))
return node->get_alias_target();
}
+static inline bool cgraph_for_node_and_aliases(cgraph_node_ptr node, bool (*callback)(cgraph_node_ptr, void *), void *data, bool include_overwritable)
+{
+ return node->call_for_symbol_thunks_and_aliases(callback, data, include_overwritable);
+}
+
static inline struct cgraph_node_hook_list *cgraph_add_function_insertion_hook(cgraph_node_hook hook, void *data)
{
return symtab->add_cgraph_insertion_hook(hook, data);
return gimple_build_assign(lhs, subcode, op1, op2 PASS_MEM_STAT);
}
+template <>
+template <>
+inline bool is_a_helper<const ggoto *>::test(const_gimple gs)
+{
+ return gs->code == GIMPLE_GOTO;
+}
+
template <>
template <>
inline bool is_a_helper<const greturn *>::test(const_gimple gs)
return as_a<const gcall *>(stmt);
}
+static inline ggoto *as_a_ggoto(gimple stmt)
+{
+ return as_a<ggoto *>(stmt);
+}
+
+static inline const ggoto *as_a_const_ggoto(const_gimple stmt)
+{
+ return as_a<const ggoto *>(stmt);
+}
+
static inline gphi *as_a_gphi(gimple stmt)
{
return as_a<gphi *>(stmt);
#define debug_gimple_stmt(s) debug_gimple_stmt(CONST_CAST_GIMPLE(s))
#endif
+#if BUILDING_GCC_VERSION >= 7000
+#define get_inner_reference(exp, pbitsize, pbitpos, poffset, pmode, punsignedp, preversep, pvolatilep, keep_aligning) \
+ get_inner_reference(exp, pbitsize, pbitpos, poffset, pmode, punsignedp, preversep, pvolatilep)
+#endif
+
#endif
op = LROTATE_EXPR;
/*
* This code limits the value of random_const to
- * the size of a wide int for the rotation
+ * the size of a long for the rotation
*/
- random_const &= HOST_BITS_PER_WIDE_INT - 1;
+ random_const %= TYPE_PRECISION(long_unsigned_type_node);
break;
}
conn = &efw->in_conn;
amdtp_stream_destroy(stream);
- cmp_connection_destroy(&efw->out_conn);
+ cmp_connection_destroy(conn);
}
static int
if (err < 0)
amdtp_stream_destroy(&tscm->rx_stream);
- return 0;
+ return err;
}
/* At bus reset, streaming is stopped and some registers are clear. */
SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_FIXUP_ASUS_W2JC),
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_FIXUP_EEE1601),
SND_PCI_QUIRK(0x1043, 0x84bc, "ASUS ET2700", ALC887_FIXUP_ASUS_BASS),
+ SND_PCI_QUIRK(0x1043, 0x8691, "ASUS ROG Ranger VIII", ALC882_FIXUP_GPIO3),
SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC889_FIXUP_VAIO_TT),
SND_PCI_QUIRK(0x104d, 0x905a, "Sony Vaio Z", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x1043, 0x15a7, "ASUS UX51VZH", ALC662_FIXUP_BASS_16),
SND_PCI_QUIRK(0x1043, 0x177d, "ASUS N551", ALC668_FIXUP_ASUS_Nx51),
SND_PCI_QUIRK(0x1043, 0x17bd, "ASUS N751", ALC668_FIXUP_ASUS_Nx51),
+ SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71SL", ALC662_FIXUP_ASUS_MODE8),
SND_PCI_QUIRK(0x1043, 0x1b73, "ASUS N55SF", ALC662_FIXUP_BASS_16),
SND_PCI_QUIRK(0x1043, 0x1bf3, "ASUS N76VZ", ALC662_FIXUP_BASS_MODE4_CHMAP),
SND_PCI_QUIRK(0x1043, 0x8469, "ASUS mobo", ALC662_FIXUP_NO_JACK_DETECT),
if (unlikely(atomic_read(&ep->chip->shutdown)))
goto exit_clear;
+ if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags)))
+ goto exit_clear;
+
if (usb_pipeout(ep->pipe)) {
retire_outbound_urb(ep, ctx);
/* can be stopped during retire callback */
alive, ep->ep_num);
clear_bit(EP_FLAG_STOPPING, &ep->flags);
+ ep->data_subs = NULL;
+ ep->sync_slave = NULL;
+ ep->retire_data_urb = NULL;
+ ep->prepare_data_urb = NULL;
+
return 0;
}
/**
* snd_usb_endpoint_start: start an snd_usb_endpoint
*
- * @ep: the endpoint to start
- * @can_sleep: flag indicating whether the operation is executed in
- * non-atomic context
+ * @ep: the endpoint to start
*
* A call to this function will increment the use count of the endpoint.
* In case it is not already running, the URBs for this endpoint will be
*
* Returns an error if the URB submission failed, 0 in all other cases.
*/
-int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, bool can_sleep)
+int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
{
int err;
unsigned int i;
/* just to be sure */
deactivate_urbs(ep, false);
- if (can_sleep)
- wait_clear_urbs(ep);
ep->active_mask = 0;
ep->unlink_mask = 0;
if (--ep->use_count == 0) {
deactivate_urbs(ep, false);
- ep->data_subs = NULL;
- ep->sync_slave = NULL;
- ep->retire_data_urb = NULL;
- ep->prepare_data_urb = NULL;
set_bit(EP_FLAG_STOPPING, &ep->flags);
}
}
struct audioformat *fmt,
struct snd_usb_endpoint *sync_ep);
-int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, bool can_sleep);
+int snd_usb_endpoint_start(struct snd_usb_endpoint *ep);
void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep);
void snd_usb_endpoint_sync_pending_stop(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep);
}
}
-static int start_endpoints(struct snd_usb_substream *subs, bool can_sleep)
+static int start_endpoints(struct snd_usb_substream *subs)
{
int err;
dev_dbg(&subs->dev->dev, "Starting data EP @%p\n", ep);
ep->data_subs = subs;
- err = snd_usb_endpoint_start(ep, can_sleep);
+ err = snd_usb_endpoint_start(ep);
if (err < 0) {
clear_bit(SUBSTREAM_FLAG_DATA_EP_STARTED, &subs->flags);
return err;
dev_dbg(&subs->dev->dev, "Starting sync EP @%p\n", ep);
ep->sync_slave = subs->data_endpoint;
- err = snd_usb_endpoint_start(ep, can_sleep);
+ err = snd_usb_endpoint_start(ep);
if (err < 0) {
clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags);
return err;
/* for playback, submit the URBs now; otherwise, the first hwptr_done
* updates for all URBs would happen at the same time when starting */
if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK)
- ret = start_endpoints(subs, true);
+ ret = start_endpoints(subs);
unlock:
snd_usb_unlock_shutdown(subs->stream->chip);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- err = start_endpoints(subs, false);
+ err = start_endpoints(subs);
if (err < 0)
return err;
klibcdirs:;
PHONY += klibcdirs
-suffix_y = $(CONFIG_INITRAMFS_COMPRESSION)
-AFLAGS_initramfs_data.o += -DINITRAMFS_IMAGE="usr/initramfs_data.cpio$(suffix_y)"
+suffix_y = $(subst $\",,$(CONFIG_INITRAMFS_COMPRESSION))
+datafile_y = initramfs_data.cpio$(suffix_y)
+AFLAGS_initramfs_data.o += -DINITRAMFS_IMAGE="usr/$(datafile_y)"
+
# Generate builtin.o based on initramfs_data.o
obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data.o
# initramfs_data.o contains the compressed initramfs_data.cpio image.
# The image is included using .incbin, a dependency which is not
# tracked automatically.
-$(obj)/initramfs_data.o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE
+$(obj)/initramfs_data.o: $(obj)/$(datafile_y) FORCE
#####
# Generate the initramfs cpio archive
quiet_cmd_initfs = GEN $@
cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
-targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 \
- initramfs_data.cpio.lzma initramfs_data.cpio.xz \
- initramfs_data.cpio.lzo initramfs_data.cpio.lz4 \
- initramfs_data.cpio
+targets := $(datafile_y)
+
# do not try to update files included in initramfs
$(deps_initramfs): ;
# 2) There are changes in which files are included (added or deleted)
# 3) If gen_init_cpio are newer than initramfs_data.cpio
# 4) arguments to gen_initramfs.sh changes
-$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
+$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
$(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d
$(call if_changed,initfs)
projects / linux.git / commitdiff