pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD

Add the BOOT and CARD pins as GROUP_GROUPs as well so they can be
configured in devicetree using groups = BOOTx or groups = CARDx. This
makes the behavior consistent with other pins inside the same driver as
well as with the BOOT and CARD pins of the GXBB and GXL pinctrl drivers.

Fixes: 6ac730951104a4 ("pinctrl: add driver for Amlogic Meson SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c
index 0c7c41f20d1d6f5f4e9b5c7f2d1221f258a717ac..a26c05d3eec3e2a0f03046ceac3e1afdb85ab39f 100644 (file)
--- a/drivers/pinctrl/meson/pinctrl-meson8.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8.c
@@ -506,6 +506,32 @@ static struct meson_pmx_group meson8_cbus_groups[] = {
        GPIO_GROUP(GPIOZ_12),
        GPIO_GROUP(GPIOZ_13),
        GPIO_GROUP(GPIOZ_14),
+       GPIO_GROUP(CARD_0),
+       GPIO_GROUP(CARD_1),
+       GPIO_GROUP(CARD_2),
+       GPIO_GROUP(CARD_3),
+       GPIO_GROUP(CARD_4),
+       GPIO_GROUP(CARD_5),
+       GPIO_GROUP(CARD_6),
+       GPIO_GROUP(BOOT_0),
+       GPIO_GROUP(BOOT_1),
+       GPIO_GROUP(BOOT_2),
+       GPIO_GROUP(BOOT_3),
+       GPIO_GROUP(BOOT_4),
+       GPIO_GROUP(BOOT_5),
+       GPIO_GROUP(BOOT_6),
+       GPIO_GROUP(BOOT_7),
+       GPIO_GROUP(BOOT_8),
+       GPIO_GROUP(BOOT_9),
+       GPIO_GROUP(BOOT_10),
+       GPIO_GROUP(BOOT_11),
+       GPIO_GROUP(BOOT_12),
+       GPIO_GROUP(BOOT_13),
+       GPIO_GROUP(BOOT_14),
+       GPIO_GROUP(BOOT_15),
+       GPIO_GROUP(BOOT_16),
+       GPIO_GROUP(BOOT_17),
+       GPIO_GROUP(BOOT_18),
 
        /* bank X */
        GROUP(sd_d0_a,          8,      5),