arm64: dts: marvell: 8040-db: describe the 10G interfaces as fixed-link

This patch adds a fixed-link node to both 10G interfaces of the 8040-db
board. This is required as the mvpp2 driver now uses phylink. The best
solution would have been to describe the SFP cages but they are not
wired correctly, and thus unusable, so we chose to use fixed-link
instead.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 5689fb23bbab7cc9e93a216dde6ce9f577b3bc42..1bac437369a1594d6b08018d96e5bea46174a8df 100644 (file)
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -177,6 +177,11 @@ &cp0_ethernet {
 &cp0_eth0 {
        status = "okay";
        phy-mode = "10gbase-kr";
+
+       fixed-link {
+               speed = <10000>;
+               full-duplex;
+       };
 };
 
 &cp0_eth2 {
@@ -303,6 +308,11 @@ &cp1_ethernet {
 &cp1_eth0 {
        status = "okay";
        phy-mode = "10gbase-kr";
+
+       fixed-link {
+               speed = <10000>;
+               full-duplex;
+       };
 };
 
 &cp1_eth1 {