ARM: dts: BCM5301X: Add DT for Luxul ABR-4500

This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
board design.

Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 563f8a4f15804656fc305d67b894da30f8a9e3d7..2d964c9b08eed288de69dc66097838b84935e128 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
        bcm4709-tplink-archer-c9-v1.dtb \
        bcm47094-dlink-dir-885l.dtb \
        bcm47094-linksys-panamera.dtb \
+       bcm47094-luxul-abr-4500.dtb \
        bcm47094-luxul-xbr-4500.dtb \
        bcm47094-luxul-xwr-3100.dtb \
        bcm47094-netgear-r8500.dtb \

diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
new file mode 100644 (file)
index 0000000..ecd22a2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+       compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+       model = "Luxul ABR-4500 V1";
+
+       chosen {
+               bootargs = "earlycon";
+       };
+
+       memory {
+               reg = <0x00000000 0x08000000
+                      0x88000000 0x18000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               status {
+                       label = "bcm53xx:green:status";
+                       gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "timer";
+               };
+
+               usb3 {
+                       label = "bcm53xx:green:usb3";
+                       gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>,
+                               <&xhci_port1>;
+                       linux,default-trigger = "usbport";
+               };
+
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               restart {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&usb3 {
+       vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+       status = "okay";
+};