config ALPHA_GENERIC
bool "Generic"
depends on TTY
+ select HAVE_EISA
help
A generic kernel will run on all supported Alpha hardware.
config ALPHA_ALCOR
bool "Alcor/Alpha-XLT"
+ select HAVE_EISA
help
For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
bool "Jensen"
depends on BROKEN
select DMA_DIRECT_OPS
+ select HAVE_EISA
help
DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
of the first-generation Alpha systems. A number of these systems
config ALPHA_LYNX
bool "Lynx"
+ select HAVE_EISA
help
AlphaServer 2100A-based systems.
config ALPHA_MIATA
bool "Miata"
+ select HAVE_EISA
help
The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
or 600au).
config ALPHA_NORITAKE
bool "Noritake"
+ select HAVE_EISA
help
AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
systems.
config ALPHA_RAWHIDE
bool "Rawhide"
+ select HAVE_EISA
help
AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
See HOWTO at
config ALPHA_SABLE
bool "Sable"
+ select HAVE_EISA
help
Digital AlphaServer 2000 and 2100-based systems.
If unsure, say N.
-config EISA
- bool
- depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
- default y
-
config ARCH_MAY_HAVE_PC_FDC
def_bool y
default 1200 if HZ_1200
default 1024
-source "drivers/eisa/Kconfig"
-
config SRM_ENV
tristate "SRM environment through procfs"
depends on PROC_FS
config NO_IOPORT_MAP
bool
-config EISA
- bool
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
config SBUS
bool
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
+ select GENERIC_ISA_DMA if EISA
select GENERIC_LIB_ASHLDI3
select GENERIC_LIB_ASHRDI3
select GENERIC_LIB_CMPDI2
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
select IRQ_FORCED_THREADING
+ select ISA if EISA
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select MODULES_USE_ELF_REL if MODULES
select PERF_USE_VMALLOC
select CSRC_R4K
select DEFAULT_SGI_PARTITION
select DMA_NONCOHERENT
- select HW_HAS_EISA
+ select HAVE_EISA
select I8253
select I8259
select IP22_CPU_SCACHE
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select IRQ_MIPS_CPU
- select HW_HAS_EISA
+ select HAVE_EISA
select I8253
select I8259
select SGI_HAS_I8042
select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
+ select HAVE_EISA
select HAVE_PCSPKR_PLATFORM
- select HW_HAS_EISA
select HAVE_PCI
select IRQ_MIPS_CPU
select I8253
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
-config HW_HAS_EISA
- bool
-
config PCI_DRIVERS_GENERIC
select PCI_DOMAINS_GENERIC if PCI
bool
config ISA
bool
-config EISA
- bool "EISA support"
- depends on HW_HAS_EISA
- select ISA
- select GENERIC_ISA_DMA
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
-source "drivers/eisa/Kconfig"
-
config TC
bool "TURBOchannel support"
depends on MACH_DECSTATION
depends on PCI
default y if 40x || 44x
-config EISA
- bool
-
config SBUS
bool
select HAVE_DYNAMIC_FTRACE_WITH_REGS
select HAVE_EBPF_JIT
select HAVE_EFFICIENT_UNALIGNED_ACCESS
+ select HAVE_EISA
select HAVE_EXIT_THREAD
select HAVE_FENTRY if X86_64 || DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
-config EISA
- bool "EISA support"
- depends on ISA
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
-source "drivers/eisa/Kconfig"
-
config SCx200
tristate "NatSemi SCx200 support"
---help---
# Keep I/O buses first
source "drivers/amba/Kconfig"
+source "drivers/eisa/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
source "drivers/rapidio/Kconfig"
#
# EISA configuration
#
+
+config HAVE_EISA
+ bool
+
+menuconfig EISA
+ bool "EISA support"
+ depends on HAVE_EISA
+ ---help---
+ The Extended Industry Standard Architecture (EISA) bus was
+ developed as an open alternative to the IBM MicroChannel bus.
+
+ The EISA bus provided some of the features of the IBM MicroChannel
+ bus while maintaining backward compatibility with cards made for
+ the older ISA bus. The EISA bus saw limited use between 1988 and
+ 1995 when it was made obsolete by the PCI bus.
+
+ Say Y here if you are building a kernel for an EISA-based machine.
+
+ Otherwise, say N.
+
config EISA_VLB_PRIMING
bool "Vesa Local Bus priming"
depends on X86 && EISA
names.
When in doubt, say Y.
-
config GSC
bool "VSC/GSC/HSC bus support"
+ select HAVE_EISA
default y
help
The VSC, GSC and HSC busses were used from the earliest 700-series
used), a HIL interface chip and is also known to be used as the
GSC bridge for an X.25 GSC card.
-config EISA
- bool "EISA support"
- depends on GSC
- help
- Say Y here if you have an EISA bus in your machine. This code
- supports both the Mongoose & Wax EISA adapters. It is sadly
- incomplete and lacks support for card-to-host DMA.
-
-source "drivers/eisa/Kconfig"
-
config ISA
bool "ISA support"
depends on EISA
projects / linux.git / commitdiff