USB: serial: cp210x: Adding Seletek device id's

These device ID's are not associated with the cp210x module currently,
but should be. This patch allows the devices to operate upon connecting
them to the usb bus as intended.

Signed-off-by: Michiel van de Garde <mgparser@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index f40c856ff758d959318ae4d251eea6cd96f5819a..84ce2d74894c9c3b25c7bcf0185f23887492eb94 100644 (file)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -147,6 +147,8 @@ static const struct usb_device_id id_table[] = {
        { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
        { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
        { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
+       { USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
+       { USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
        { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
        { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
        { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */